process materials and production accessories
DESCRIPTION
Process Materials and Production AccessoriesTRANSCRIPT
Process materials & Production accessories
3
norway – oem electronics aBP O Box 1025 (Norrabyvägen 6B) SE-573 29 TranåsPhone: +46 75 242 45 00 | Fax: +46 75 242 45 [email protected] | www.oemelectronics.se
denmark – oem automatic klitsØ a/sEngholm Parkvej 4 DK- 3450 AllerødPhone: +45 70 10 64 00 | Fax: +45 70 10 64 [email protected] | www.oemklitso.dk
the Baltics – oem eesti oÜKanali tee 1-328, EE-10112 TallinnPhone: +372 6550 871 | Fax: +372 6550 873 [email protected] | www.oem.ee
taBle of CONTENTS
Material Page
Solder Paste 6
Solder Wire 7
Fluxes 8
Surface Mount Adhesives 9
Conductive Adhesives 10
Thermal Management Materials 11 Thermal Management Adhesives 12
Silicones 13-15
Die Attach Adhesives 16
Encapsulants 17
Circuit Board Protection 18
Cleaners and other Products 19
Soldering Stations Page
Soldering Stations 22-28
Cleaning of Tips 29
Tools and Stands 30-31
Soldering Cartridges 32
Work Environment Page
Filter System 34-35
Working Table 36
Fume Cupboards 37
Chemical Cabinets 37
Inspection & Other Equipment Page
Inspection & Other Equipment 38
Our Business Areas Page
Our Business Areas 39
4
sweden – oem electronics aBP O Box 1025 (Norrabyvägen 6B) SE-573 29 TranåsPhone: +46 75 242 45 00 | Fax: +46 75 242 45 [email protected] | www.oemelectronics.se
finland – oem electronics oyFiskarsinkatu 3 FI-20750 TurkuPhone: +358 207 499 300 | Fax: +358 207 499 496 [email protected] | www.oemelectronics.fi
Poland – oem electronics Plul. Postepu 2, PL-02-676 WARSZAWAPhone: +48 22 863 27 22 | Fax: +48 22 863 27 24
[email protected] | www.oemelectronics.pl
material
6
sweden – oem electronics aBP O Box 1025 (Norrabyvägen 6B) SE-573 29 TranåsPhone: +46 75 242 45 00 | Fax: +46 75 242 45 [email protected] | www.oemelectronics.se
finland – oem electronics oyFiskarsinkatu 3 FI-20750 TurkuPhone: +358 207 499 300 | Fax: +358 207 499 496 [email protected] | www.oemelectronics.fi
Poland – oem electronics Plul. Postepu 2, PL-02-676 WARSZAWAPhone: +48 22 863 27 22 | Fax: +48 22 863 27 24
[email protected] | www.oemelectronics.pl
The Multicore® line of solder pastes is designed to meet the rigorous demands of a variety of
electronic manufacturing soldering processes. Whether your process requires long abandon
times, wide process windows, or high-speed printing, Henkel offers a paste that suits your
requirements.
PRODUCT DesCRiPTiOn/APPLiCATiOn ALLOY % MeTAL LOAD
TACK (g./MM ²)
PRinT sPeeD MM/seC.
iPC/j-sTD CLAssifiCATiOn
MP218
- Outstanding humidity resistance- Colourless residues- Soft non-stick pin testable residues- Extended open time and tack-life - Suitable for fine pich, high speed printing
SN62/SN6363S4
(Anti-Tombstoning)
89.5 90.5
(Proflow)1.1 25-200 ROL0
Ws200- High performance water washable solder paste.- Residues are readily removed with DI water, without the need for a saponifier- Good open time with excellent print definition and soldering activity
SN62/SN63 90.5 0.8 25-100 OHR1
Leaded Solder Paste
PRODuCT DESCRIPTION/APPLICATION ALLOY POWDER TYPE
%METAL LOAD
TACK (G./MM²)
PRINT SPEED MM/SEC.
IPC/j-STD CLASSIfICATION
Lf318- Outstanding humidity resistance - Colourless residues - Soft non-stick pin testable residues- Extended open time and tack-life
96SC AGS (45-20 µm)
88.5 2.0 25-150 ROL0
Lf700
- No-clean- Low voiding - Excellent humidity resistance - Long abandon time- High printing speed
96SC97SC
DAP (38-20 µm)
1.82.4
1.82.4 20-150 ROL0
Ws300 - Lead-free water washable solder paste96SC97SC
AGS (45-20 µm)
0.9 0.9 25-100 OHR1
Lead Free Solder Paste
Tin Lead Lead free
Solder Paste
No CleanLead free
No CleanTin Lead
Water WashLead free
Water WashTin Lead
Lf318™ MP218™ WS300™ WS200™
Lf700™
solder PASTE
7
norway – oem electronics aBP O Box 1025 (Norrabyvägen 6B) SE-573 29 TranåsPhone: +46 75 242 45 00 | Fax: +46 75 242 45 [email protected] | www.oemelectronics.se
denmark – oem automatic klitsØ a/sEngholm Parkvej 4 DK- 3450 AllerødPhone: +45 70 10 64 00 | Fax: +45 70 10 64 [email protected] | www.oemklitso.dk
the Baltics – oem eesti oÜKanali tee 1-328, EE-10112 TallinnPhone: +372 6550 871 | Fax: +372 6550 873 [email protected] | www.oem.ee
The line of cored wires features the renowned multiple flux cores technology to ensure even and
consistent distribution of flux throughout the solder wire. This reliability makes Multicore solder wires
the first choice for wire soldering processes.
solder WIRE
No Clean Water Wash
C400™ Hydro-X™
C502™
362™
C511™
Cored Wire
PRODUCT DesCRiPTiOn hALiDe COnTenT iPC CLAss
ALLOY OPTiOns (sn/PB)
ALLOY OPTiOns (PB-fRee)
COnTenT (BYWeighT)
CRYsTAL 400
Halide free, no-clean, clear residue, in creased flux content for improved wetting ZERO ROL0 60/40, SN62 96SC, 99C, 97SC 2.2%
CRYsTAL 502
No-clean, clear residue, minimal activation for increased wetting speed 0.2% ROM1 60/40, SN62 96SC, 99C, 97SC 3%
CRYsTAL 511
No clean, clear residues, heat stable 1.1% ROM1 60/40 96SC, 97SC 2.7%
362 General purpose high activity for fast wetting 0.5% ROL1 60/40, SN62 96SC, 99C, 97SC 3%
hYDRO-X High activity water washable 3% ORH1 60/40, SN62 96SC, 99C, 97SC 2%
96SC = Sn 95,5, AG 3,8%, Cu 0,7% melting point 217 °C99C = Sn 99,3%, Cu 0,7% melting point 227 °C97SC = Sn 96,5% Ag 3,0%, Cu 0,5% melting point 217-218 °C
Bolded text is normal warehouse products.
Use fume absorbers when soldering. More info on page 33-35
8
sweden – oem electronics aBP O Box 1025 (Norrabyvägen 6B) SE-573 29 TranåsPhone: +46 75 242 45 00 | Fax: +46 75 242 45 [email protected] | www.oemelectronics.se
finland – oem electronics oyFiskarsinkatu 3 FI-20750 TurkuPhone: +358 207 499 300 | Fax: +358 207 499 496 [email protected] | www.oemelectronics.fi
Poland – oem electronics Plul. Postepu 2, PL-02-676 WARSZAWAPhone: +48 22 863 27 22 | Fax: +48 22 863 27 24
[email protected] | www.oemelectronics.pl
fluxes
PRODUCT DesCRiPTiOn/APPLiCATiOn % sOLiDs % hALiDs ACiD vALUe iPC CLAss APPLiCATiOn
X32-10
- Clear residue - Wide process window- A general purpose halide-free low solids flux - Suitable for foam and spray flux application systems
2.2 ZERO 15.3 REM0 SPRAY/fOAM
Mf 388- Low residue - Halide free - Ideal for Pb-free wave soldering
3.5 ZERO 20 ROL0 SPRAY
5372- High temperature - Dipping flux- Suitable for all Multicore alloys
75 0.12 38 - DIPPING
Alcohol Based Fluxes
The range of VOC-free (Volatile Organic Compound) fluxes offer reliable, high yield, no clean
wave soldering whilst providing significant environmental and safety benefits due to the non
flammable VOC-free (water based) flux carrier systems.
PRODUCT DesCRiPTiOn/APPLiCATiOn % sOLiDs % hALiDs ACiD vALUe iPC CLAss APPLiCATiOn
Mf300- General purpose VOC-free (water based)- No-clean, halide-free and resin-free flux - Compatible with Pb-free processes
4.6 ZERO 37 ORM0 SPRAY/fOAM
VOC-Free Fluxes
PRODUCT DesCRiPTiOn/APPLiCATiOn % sOLiDs % hALiDs ACiD vALUe iPC CLAss APPLiCATiOn
hYDRO-X/20
- IPA based- A high activity water washable flux - unique activator package - Residues are readily and completely removed by water wash after soldering - Suitable for lead-free wave soldering
20 1.0 24 ORH1 SPRAY/fOAM
Water Washable Fluxes
Liquid fluxes
5372 Mf300™ Hydro-X20™
Mf388™ ROML
No Clean Voc free Water Wash
SC01™Rework Small Areas
Cleanerspage 19
X32-10i™ REMO
Syntehetic Resin
9
norway – oem electronics aBP O Box 1025 (Norrabyvägen 6B) SE-573 29 TranåsPhone: +46 75 242 45 00 | Fax: +46 75 242 45 [email protected] | www.oemelectronics.se
denmark – oem automatic klitsØ a/sEngholm Parkvej 4 DK- 3450 AllerødPhone: +45 70 10 64 00 | Fax: +45 70 10 64 [email protected] | www.oemklitso.dk
the Baltics – oem eesti oÜKanali tee 1-328, EE-10112 TallinnPhone: +372 6550 871 | Fax: +372 6550 873 [email protected] | www.oem.ee
surface mount ADHESIVES
PRODUCT DesCRiPTiOn/APPLiCATiOn COLOR*** CURe PROCess MeThiD sTORAge (PROTeCT fROM heAT)
sheLf Life**
3609 - for high-speed dispensing- Red for best vision pickup on light surfaces
RED90 sec. at 150 °C
or3-4 min at 125 °C
High Speed Dispensing
40,000+ DPH capable.5 °C ± 3 °C 6 months
DOM
3621 - Superior humidity resistance and electrical properties - Can be used in lead free solder applications - Room temperature storage capable
RED90 sec. at 150 °C
or3-4 min at 125 °C
Very High Speed Dispensing
47,000 DPH capable. jettable.
5 °C ± 3 °C or 8 °C -21 °C for 30 days
10 months DOM
3627 - Specially formulated for excellent
high-speed dispensing- Room temperature storage capable
RED 90 sec. at 150 °C 3-4 min at 125 °C High Speed Dispensing 5 °C ± 3 °C 6 months
DOM
3629
- High reliability - Low temperature cure- Lead-free capable- flourescence under uV light
RED PINK
60 sec. at 150 °C110 sec. at 120 °C3 min. at 110 °C
Dispensing Printing 5 °C ± 3 °C 6 months DOM
Syringe Dispense Adhesive
Henkel is the world leader in developing cutting edge technology for high-speed syringe
dispense and stencil print Chipbonders®. Innovative new surface mount adhesives are
developed to meet the challenges of high speed assembly processes and high reliability
end user requirements.
PRODUCT DesCRiPTiOn/APPLiCATiOn COLOR*** CURe PROCess MeThiD sTORAge (PROTeCT fROM heAT)
sheLf Life**
3616 - Specifically formulated for metal stencil print applications - Especially well-suited for large components
RED60 sec. at 150 °C
or2-8 min at 125 °C
Stencil Print(0.5-2"/sec.) 5 °C ± 3 °C 9 months
DOM
3627 - Excellent high-speed printing for finepitch components- Room temperature storage capable
RED 90 sec. at 150 °C 3-4 min at 125 °C
Dispense and Stencil Print 5 °C ± 3 °C 6 months
DOM
3629
- High reliability- Low temperature cure- Lead-free capable- flourescence under uV light
REDPINK
60 sec. at 150 °C110 sec. at 120 °C3 min. at 110 °C
Dispensing Printing 5 °C ± 3 °C 6 months DOM
Stencil Print/Pin Transfer Adhesives
PRODUCT DesCRiPTiOn/APPLiCATiOn sOLvenT TYPe fLAshPOinT CORROsive PROPeRTies
OzOne DePLeTiOn POTenTiAL
7360- Nozzle and dispense machine component cleaner- Excellent for removal of uncured adhesive from the board without causing the adhesive to gel
Aliphatic Ester Blend 100 °C None None
Clean Up Solvent
10
sweden – oem electronics aBP O Box 1025 (Norrabyvägen 6B) SE-573 29 TranåsPhone: +46 75 242 45 00 | Fax: +46 75 242 45 [email protected] | www.oemelectronics.se
finland – oem electronics oyFiskarsinkatu 3 FI-20750 TurkuPhone: +358 207 499 300 | Fax: +358 207 499 496 [email protected] | www.oemelectronics.fi
Poland – oem electronics Plul. Postepu 2, PL-02-676 WARSZAWAPhone: +48 22 863 27 22 | Fax: +48 22 863 27 24
[email protected] | www.oemelectronics.pl
PRODUCT DesCRiPTiOn/CURe DesCRiPTiOn/APPLiCATiOn sheLf
Life*
LAPsheAR ADhesiOn (AL/AL)
CURe sCheDULes
Tg °C
CTe PPM/ °C
vOLUMe Resis-TiviTY (OhM-CM)
WORK Life AT ROOM TeMP.
3880 Heat Cure1-component
- Syringe or stencil dispense- Silver conductive adhesive for solder replacement - Long work life
6 months at
0-(-10 °C)
>1,000 psi 6.9
N/mm²
10 min at 125 °C6 min at 150 °C3 min at 175 °C
40 45 <.0.0005 7 days
3888 Room temperature 2-component
Room-temperature cure adhesive for applications requiring a com bination of good mechanical and electrical properties
6 months at
21-25 °C
>1,000 psi 6.9
N/mm²
24 hrs at 23 °C1 hr at 120 °C
30 min at 155 °C50 >50 <.0.0001 90 min.
Electrically Conductive Epoxy Adhesives
Loctite® Electrically Conductive Adhesives provide both a mechanical bond and an electrical
interconnection between a device and a circuit board. Loctite® electrically conductive
adhesives meet the industry’s need for lead-free alternatives to solder.
*Shelf life- 2-component materials have a one year shelf life at room temperature (21 °C-25 °C)
2-Component Packages
Typically used for sample evaluation and rework applications. These packages do not require special storage equipment. They can be stored up to 12 months at room temperature.
1-Component Packages
All 1-component products are packaged in convenient syringes. These packages must be stored fROZEN at -40 °C. (The exception is product 3880 which is stored at 0 °C.)
Isotropical Conductive
Adhesive Clean-up Solvent
3880™ 7360™
3888™
Electrically Conductive Adhesives
Screen Print/Pin Transfers
Dispense Adhesives
Cleaner
3616™ 3609™ 7360™
3627™ 3621™
3629™ 3627™
3629™
Chipbonder ™
conductive ADHESIVES
11
norway – oem electronics aBP O Box 1025 (Norrabyvägen 6B) SE-573 29 TranåsPhone: +46 75 242 45 00 | Fax: +46 75 242 45 [email protected] | www.oemelectronics.se
denmark – oem automatic klitsØ a/sEngholm Parkvej 4 DK- 3450 AllerødPhone: +45 70 10 64 00 | Fax: +45 70 10 64 [email protected] | www.oemklitso.dk
the Baltics – oem eesti oÜKanali tee 1-328, EE-10112 TallinnPhone: +372 6550 871 | Fax: +372 6550 873 [email protected] | www.oem.ee
thermal management MATERIALS
PRODUCT DesCRiPTiOn/APPLiCATiOn
TheRMAL iMPeDAnCe (°C-in. ²/W)AT 80 Psi
TheRMAL iMPeDAnCe (°C-in. ²/W)AT 550 KPAi
TheRMAL COnDUCTiviTY (W/MK)
PhAse ChAnge TeMPeRATURe (ºC)
sUB-sTRATes ThiCKness (MM)
TOTAL ThiCKness (MM)
sUB-sTRATes MATeRiAL
Power-strate®
Xtreme™
unsupported film with very low thermal impedance even at low pressure. fills gaps up to 0.2 mm (0.008") or collapses to form a thin interface. Direct attach to heat sink without heating. Suitable for semiconductor and power electronics applications
0.003 0.022 3.3 45 N/A 0.0080.2 None
Power-strate® 51r™
Low thermal impedance, reworkable grade. Most suited to applications on lidded processors where the heat sink may have to be removed for rework.
0.008 0.052 3 51 0.051 0.074 to 0.083
AL 1145-0
Power-strate®
51,60™
Low thermal impedance, robust grade. Suited to a wide range of applications on bare die processors and other electronics devices.
0.008 0.052 3 51 or 61 0.051 0.064 to 0.16
AL 1145-0
PsX-D Thermal paste for stencil print or manual application 0.008 0.052 3.4 N/A N/A 0.254 All
silver-strate®
Excellent thermal performace, particularly at higher pressures. Typically used on Rf devices and SCRs where electrical conductivity is required, (Silverfilled).
0.003 0.022 3.14 51 0.051 0.102 to 0.127
AL 1145-0
Therm-strate®
TC™
Phase change compound in applicator bar. Ideal for prototyping, rework and small scale production.
0.021 0.137 0.47 60 N/A N/A None
Therm-strate®
2000™
Good thermal performance most suited to applications on power IGBTs, semiconductors, DC-DC converters and other isolated packages.
0.022 0.143 3 600.051
&0.128
0.076 to 0.191
AL 1145-0
Phase Change Thermal Interface Material
The PCTIMs are silicone-free and do not migrate or dry out like thermal greases. These innovative
products are manufactured as a highly thixo-tropic phase change compound coated in a strictly
controlled manner upon the surfaces of special grades of thin AL or CU foils, or to dielectric
substrate films.
PRODuCT DESCRIPTION/APPLICATION
TheRMAL iMPeDAnCe (°C-in. ²/W)AT 80 Psi
TheRMAL iMPeDAnCe (°C-in. ²/W)AT 550 KPAi
TheRMAL COnDUCTiviTY (W/MK)
PhAse ChAnge TeMP. (ºC)
ThiCK-ness sUBsTRA-Tes (MM)
TOTAL ThiCK-ness (MM)
sUB-sTRATes MATeRiAL
DieLeCTRiC RATing vAC/MiL sUBsTRATe
UL YeLLOW CARD
UL fLAM-MABiLTY
isostrate® 2000™
Electrically isolating phase change material for use with a wide range of non-isolated components.
0.12 0.78 0.45 60 0.025 to 0.076
0.051 to
0.153
Polyi-mide >5000 None None
isostrate® j-series™
Electrically isolating phase change material. Ideal for non-isolated devices in high volume applications where high thermal performance is not required.
0.48 3.12 0.155 60 0.0051 0.076 Polyethy-lene >5000
See data sheet
See data sheet
MCM-strate®
Adhesive backed version of Isostrate. Allows pad to be postioned to facilitate assembly.
0.25 1.325 0.4 60 0.025 to 0.076
0.064 to
0.114
Polyi-mide >5000 E1049
35 94V-0
eMi-strate®
unique combination of thermal and EMI management. Excellent choise for radiated EMI control.
0.4 2.6 0.69 60 See data sheet
See data sheet
Polyi-mide N/A N/A N/A
Phase Change Thermal Interface Material - Electrically Isolating Products
12
sweden – oem electronics aBP O Box 1025 (Norrabyvägen 6B) SE-573 29 TranåsPhone: +46 75 242 45 00 | Fax: +46 75 242 45 [email protected] | www.oemelectronics.se
finland – oem electronics oyFiskarsinkatu 3 FI-20750 TurkuPhone: +358 207 499 300 | Fax: +358 207 499 496 [email protected] | www.oemelectronics.fi
Poland – oem electronics Plul. Postepu 2, PL-02-676 WARSZAWAPhone: +48 22 863 27 22 | Fax: +48 22 863 27 24
[email protected] | www.oemelectronics.pl
PRODUCT DesCRiPTiOn/APPLiCATiOn CURe/CheMisTRY
sPeCifiC gRAviTY visCOsiTY sheLf Life CURe
sCheDULes MODULUs Tg °C CTe PPM/ ºC
TheRMAL COnDUCTi-viTY
315Self-shimming for electrical isolation; room-temperature-curing adhesive.
1-component Activator*Acrylic
1.7 Paste 9 months at 5 °C
5 min. at 20 °C4-24 hr. at
20 °C
390,000 psi
2700 N/mm2
50 69 0.80W/mK
384 Repairable, room-temperature-curing adhesive utilized for parts subject to disassembly.
1-component Activator*Acrylic
1.6 Paste 9 months at 5 °C
5 min. at 20 °C4-24 hr. at
20 °C
400,000 psi
2800 N/mm2
50 110 0.76 W/mK
5404 Self-shimming, flexible silicone adhesive for demanding parts such as ceramic boards.
1-component Heat CureSilicone
2.4 280** g/min.
5 months at 4 °C
10 min. at 150 °C
587 psi****
4 N/mm2-40 104 1.0
W/mK
7386
7387 DEPEND is one component of a two part no mix adhesive system. It is solvent based and has a very low viscosity. 1.75 oz bottle
Heptane and Isopropanol 0.8 Very low on part life
2 months N/A N/A N/A N/A N/A
Thermal Adhesives
Thermally Conductive Adhesives eliminate the need for mechanical fasteners and clips while
providing an efficient method of thermal transfer between heat generating electronics devices and
their heat sinks.
* use with activator 7386. ** Extrusion measured @ 50 psi/0.125" orifice. *** Made to order. Initial order may require longer lead time. **** Youngs Modulus
Thermal Management Mtl.
Activator
7386™
Shimming
315™
5404™
Non- Shimming
384™
Adhesives Thermal Paste Specialty Mtl.
PSX-D® EMI-Strate®
Thermal Pads
ElectricallyInsulating
Isostrate®
ElectricallyConductive
Silverstrate®
Non-Insulating
Powerstrate® Xtreme™
Powerstrate®
Thermstrate®
thermal management ADHESIVES
13
norway – oem electronics aBP O Box 1025 (Norrabyvägen 6B) SE-573 29 TranåsPhone: +46 75 242 45 00 | Fax: +46 75 242 45 [email protected] | www.oemelectronics.se
denmark – oem automatic klitsØ a/sEngholm Parkvej 4 DK- 3450 AllerødPhone: +45 70 10 64 00 | Fax: +45 70 10 64 [email protected] | www.oemklitso.dk
the Baltics – oem eesti oÜKanali tee 1-328, EE-10112 TallinnPhone: +372 6550 871 | Fax: +372 6550 873 [email protected] | www.oem.ee
silicones
PRODUCT feATURes MiX COLOUR DenCiTY g/CM³
visCOsiTYMPA s
POT Life23° C
CURe TiMe°C/iMe fOR 1 CM
hARDness COne MM/10 APPLiCATiOns
semicosil® 926
- Low viscosity- Ready-to-use, one-component- Rapid heat cure- Low content of uncured polymer- Low ion content
1K Transp. 0.96 150 6 H100˚/240 min130˚/40 min150˚/10 min
60Encapsulation of electronic components.
semicosil® 924
- Thixotropic flow- Low ion content- Low content of volatiles- Low content of uncured polymer- forms a soft gel on vulcanization
1K Transp. 0.98 35 000 2 500
3 month15˚C/
6 month
100˚/240 min130˚/40 min150˚/10 min
50
Recommended for local encapsulation of delicate electronic components,e.g.bonded chips on hybrid components which are expo-sed to extreme external influences.
Wacker silgel® 612
- Very low viscosity- Very low hardness (silicone gel)- Crystal clear vulcanizate- Pronounced tackiness- Excellent mechanical damping properites
1:1 Transp. 0.96 1 000 2 H23˚/8 hrs
70˚/15 min120˚/5 min
300
Encapsulation of electronic components and solar cells. Embedding of optical fibres. Production of shock absorbers.Sealing of clean-room filters.
elastosil® RT745s
- Very low viscosity- Low ion content
1K Transp. 0.97 1 000 >4 H80˚/30 min120˚/5 min150˚/2 min
5 37
Shore 00
Encapsulation of electronic components
Potting and Encapsulation Silicone gel addition-curing
Silicones offer highly diverse product properties for virtually unlimited applications. With their great
versatility, silicone products are ideal for intelligent, customized solutions. They offer thermal stability,
weatherability, hydrophobic and hydrophilic surface properties, and excellent release, lubricating
and dielectric characteristics.
PRODUCT feATURes MiX COLOUR DenCiTY g/CM³
visCOsiTYMPA s
POT Life23° C
CURe TiMe°C/iMe fOR 1 CM
hARDness COne MM/10
APPLiCATiOns
elastosil® RT 601
- Low viscosity- Medium cured hardness - Excellent tensile strength- Crystal clear vulcanizate
9:1 Transp 1,02 3 500 90 min
23˚/24 hrs70˚/20 min100˚/10 min 150˚/5 min
45All-round potting compound.Manufacture of moulded articles by casting.
elastosil® RT 602
- Low viscosity- Medium hardness - Excellent heat stability
9:1 Light Grey 1,17 3 500 80 min
23˚/24 hrs70˚/20 min100˚/10 min 150˚/5 min
30 All-round potting compound.
elastosil® RT 604
- Very low viscosity- Low hardness - Crystal clear vulcanizates
9:1 Transp 1,02 800 90 min
23˚/24 hrs70˚/30 min100˚/8 min 150˚/5 min
25Encapsulation of electrical and electronic components.
elastosil® RT607
- High hardness - Excellent heat stability- flame retardant
9:1 Reddish brown 1,43 10 000 80 min
23˚/24 hrs70˚/20 min100˚/10 min 150˚/5 min
55 All-round potting compound.
elastosil® RT 622
- Good processing due to low viscosity- Very good mechanical properties- Soft vulcanizates
9:1 Reddish brown 1,3 12 000 60 min
23˚/24 hrs70˚/20 min100˚/10 min 150˚/5 min
27
All-round potting compound.Technical mouldings.Encapsulation of electrical components.
elastosil® RT 675
- Low viscosity- Low hardness - fast curing at higher temperatures
9:1 Reddish brown 2,3 35 000 150 min
23˚/24 H70˚/60 min100˚/30 min 150˚/10 min
80Encapsulation of electrical components.
elastosil® RT 743 Lv
- Extreme hardness- Excellent heat stability- Extremely high thermal conductivity
9:1 Grey 1,50 1 100 8 h 100˚/60 min 150˚/15 min 20
Encapsulation of electrical components.
Silicone Rubber Addition-Curing RTV-2
14
sweden – oem electronics aBP O Box 1025 (Norrabyvägen 6B) SE-573 29 TranåsPhone: +46 75 242 45 00 | Fax: +46 75 242 45 [email protected] | www.oemelectronics.se
finland – oem electronics oyFiskarsinkatu 3 FI-20750 TurkuPhone: +358 207 499 300 | Fax: +358 207 499 496 [email protected] | www.oemelectronics.fi
Poland – oem electronics Plul. Postepu 2, PL-02-676 WARSZAWAPhone: +48 22 863 27 22 | Fax: +48 22 863 27 24
[email protected] | www.oemelectronics.pl
Encapsulation and Coating Silicone Rubber
PRODUCT feATURes MiX COLOUR DenCiTY g/CM³
visCOsiTYMPA s
POT Life23° C
CURe TiMe°C/iMe fOR 1 CM
hARDness COne MM/10 APPLiCATiOns
elastosil® 935
- Low viscosity- Very long pot life- fast curing at elevated temperatures- Low hardness- High flexibility- Low risk of inhibition by soldering or flux residues
1:1 Transp 0.97 3 500 7 days10˚C/14 d
80˚/30 min 120˚/10 min150˚C/5 min
15
Coating of printed circuit boards.Encapsulation of electronic components.
PRODUCT feATURes MiX COLOR DenCiTY g/CM³
visCOsiTYMPA s
POT Life23° C
CURe TiMe°C/iMe fOR 1 CM
hARDness COne MM/10
APPLiCATiOns
elastosil® A 07
- Ready to use, one-component system- Low viscosity- High flexibility - Primerless adhesion to many substrates
1 K Transp. 1.08 10 000-
3-5 min 5 20
Multipurpose sealant and coating material.
elastosil® A 234
- Amine-curing system- flowable- Excellent heat stability- Excellent primerless adhesion to many substrates
1 K White 1.21 35 000 10-20 min 2 36
Gluing and sealing of steam chambers and sole plates of steam iron
elastosil® A 33
- Ready to use, one-component system- Good mechanical properties- Primerless adhesion to many substrates
1 K Ivory 1.16 -2
10-20 min 2 25
Adhesive for the coating and sealing at high temperatures.
elastosil® A 43
- Amine-curing system- flowable- Excellent heat stability- Excellent primerless adhesion to many substrates
1 KTransp. Black
1.09 350 00010-25 min
1-2 30General-purpose adhesive and coating for technical and medical applications
elastosil® n 2010
- Neutral curing system (alkoxy)- Sprayable- flowable- Primerless adhesion to many substrates- Good heat stability
1 K Transp. 1.01 20 000-
10-25 min 2-4 25
General-purpose adhesive and coating for technical applications
elastosil® n 2034
- Neutral curing system (alkoxy)- Short skin forming time- fast curing- flowable- Primerless adhesion to many substrates- Good heat stability
1 K Black 1.14 45 000-
20 min 2-4 36
General-purpose adhesive and for technical applications. CIPG- and fIPG-applications e.g. for headlamps.
elastosil® n 2197
- Neutral curing system- Solvent free- Non-slump- Excellent unprimed adhesions to most plastic, metal, glass and ceramic surfaces
1 K Grey 1.24 N/A25 min
2-4 35 General-purpose adhesive and for technical applications.
elastosil® n 2199
- Neutral curing system- Solvent free- Non-slump- Excellent unprimed adhesions to most plastic, metal, glass and ceramic surfaces
1 K Transp. 1.05 N/A25 min
2-4 40 General-purpose adhesive and for technical applications.
elastosil® n 9132
- One-part, ready-to-use- Neutral curing system- Non-slump- Excellent unprimed adhesion to most plastic, metal, glass and ceramic substrates- flame retardant:meets uL 94V-O
1 K
Grey
1.30 N/A 5-20 min 2-4 33
The fully cured rubber can withstand expansion-compression cycles for many years. Especially well suited for joining materials with different coefficients of thermal expansion.
n 9132 s White
elastosil® n 189
- Neutral curing system (oxime)- Non-slump- Good resistance against mineral oil and coolant fluids - Excellent heat stability- Excellent adhesion to many substrates
1 K Black 1.0 -10
10-25 min 1-2 60
General-purpose adhesive fortechnical applications.
fIPG- and CIPG-application
Bonding, Fixing and Sealing/Gasketing Room temperature Curing RTV-1
silicones
15
norway – oem electronics aBP O Box 1025 (Norrabyvägen 6B) SE-573 29 TranåsPhone: +46 75 242 45 00 | Fax: +46 75 242 45 [email protected] | www.oemelectronics.se
denmark – oem automatic klitsØ a/sEngholm Parkvej 4 DK- 3450 AllerødPhone: +45 70 10 64 00 | Fax: +45 70 10 64 [email protected] | www.oemklitso.dk
the Baltics – oem eesti oÜKanali tee 1-328, EE-10112 TallinnPhone: +372 6550 871 | Fax: +372 6550 873 [email protected] | www.oem.ee
silicones
PRODUCT feATURes MiX COLOUR DenCiTY g/CM³
visCOsiTYMPA s
sheAR RATe. g/10s
CURe TiMe 23 °C
hARDness shORe A APPLiCATiOns
elastosil® RT 705
- Ready-to-use, one-component - flowable- Thixotropic- High extrusion rate- fast curing at high temperatures- Good heat stability- Excellent primerless adhesion to many substrates
1K Black 1.23 100 00013 000 26 min 140˚/20 min
200˚/3 min 45
Allround glue for houseware and metal industry.useable for silk screen printing.
semicosil® 986/1K
- Ready-to-use, one-part system- Thixotropic- Translucent, medium hardness- High flexibility
1K Transp. 1.07 300 000 -
100 °/6 h 130 °/30
min 150 °/10min
51General purpose adhesive for the electronics industry.
semicosil® 987/1K
- Ready-to-use, one-component system- Low viscosity during dispensing non- slump after dispensing- Medium hardness- High flexibility - Primerless adhesion to many substrates
1KTransp.
+ Grey.
1.1 300 00030 000 -
100˚/6 h130˚/1 h
150˚/10 min50
General purpose adhesive for the electronic industry. fIPG-and CIPG-applications.
Heat Cure SiliconeAdhesive Silicone Rubber Addition-Curing
PRODUCT feATURes COLOUR DenCiTY g/CM³
OPeRATing TeMP.
hARDness COne MM/10
APPLiCATiOns
silicone Paste P 4
- Good electrical properties- Good adhesion to metal and ceramic materials- Excellent water repellency
Transp. 1.0 -40 - +220 350Lubricants for shut-off valves. Release agents for compression moulding, extruder die rings.
silicone Paste P 12
- Soft, heat sink paste with marked thermal conductivity- Electrically insulating White 2.25 -30 - +200 300
Especially used in semiconductor technology as a heat sink paste.
geniosiln 550
- Silane modified polymere adhesive, free of isocyanates, tin catalysts and silicones - Neutral curing - Temperature range -50° C to 120 °C - Solvent free - Excellent adhesioin
Grey. 1.3 -50 - +120 Shore A55
Sealant/elastic adhesive for technical applications. Can be varnished with suitable paints in cured and uncured state.
Silicone Paste
16
sweden – oem electronics aBP O Box 1025 (Norrabyvägen 6B) SE-573 29 TranåsPhone: +46 75 242 45 00 | Fax: +46 75 242 45 [email protected] | www.oemelectronics.se
finland – oem electronics oyFiskarsinkatu 3 FI-20750 TurkuPhone: +358 207 499 300 | Fax: +358 207 499 496 [email protected] | www.oemelectronics.fi
Poland – oem electronics Plul. Postepu 2, PL-02-676 WARSZAWAPhone: +48 22 863 27 22 | Fax: +48 22 863 27 24
[email protected] | www.oemelectronics.pl
die attach ADHESIVES
PRODUCT DesCRiPTiOn/APPLiCATiOn Resin fiLLeR Oven CURe/sKiP CURe
visCOsiTY 5RPM AT 25 °C
TheRMAL COnDUCTi-viTY
Tg (°C)
CTe 1/2
MODULUs AT 25°C
sTORAge TeMP.
QMi 536
Industry Standard Industry standard for die-to-die bonding; dielectric, high adhesive strength material for organic substrates.
BMI PTfE
15 min at 150 ˚C oven10 sec at 150 ˚C SC
9000 CPS 0.3 W/mk -31 93174 0.30 GPa -40 °C
QMi 550si
Low CTE CVersion of QMI 550Silica-filled for low shrinkage and low warpage on laminate and flex substrates.
BMI Silica
15 min at1 50 ˚C oven10 sec at 150 ˚C SC
17000 CPS 0.6 W/mk 33 4391 1.50 GPa -40 °C
QMi 550 eC
Electrically ConductiveSilver-filled version of QMI 550; very high adhesive and cohesive strength.
BMI Silver
15 min at 150 ˚C oven10 sec at 150 ˚C SC
17000 CPS 3.8 W/mk 2 46148 2.8 GPa -40 °C
Die Attach Adhesives for Non-Hermetic Packages For organic substrates including laminates, array, BGA and CSP packagers
Based on ultra-hydrophobic chemistry, Hysol® die attach adhesives offer very high adhesive
strength, elongation at break, and cohesive energy at high reflow temperatures. These properties
help electronic packages retain adhesive strength and structural integrity during moisture soak and
absorb stresses during the deformations associated with lead free reflow processing.
PRODUCT DesCRiPTiOn/APPLiCATiOn Resin fiLLeRReCOM-MenDe CURe
visCOsiTY 5RPM AT 25 °C
TheRMAL COnDUCTi-viTY
Tg (°C)
CTe 1/2
MODULUs AT 25°C
sTORAge TeMP.
QMi 518
Electrically Conductive, Large dieSimilar properties to QMI 519, but formulated to have a low modulus to reduce stress on die larger than 500+500 mil./13-13µm.
BMI Silver
15 min at 180 ˚C oven10 sec at 200 ˚C SC
8500 CPS 1.4 W/mk -64 69152 0.10 GPa -40 °C
QMi 519
jEDEC L1 260C for SOIC, QfN Industry standard for QfN packages. Good for all preplated leadframes, and bare copper. Higher adhesion, excellent electrical and thermal performance.
BMI Silver
15 min at 185 ˚C oven
10 sec at 200 ˚C SC
9000 CPS 3.8 W/mk 75 40140 5.3 GPa -40 °C
QMi 519hT02l
High Thermal ConductivityVery high electrical and thermal conductivity while maintaining excellent adhesion. Suitable for high heat dissipating devises.
BMI Silver
15 min at 180 ˚C oven10 sec at 200 ˚C SC
18800 CPS 7.3 W/mk 49 42104 6.70 GPa -40 °C
For inorganic substrates incl. CU, Pd, Ag & Au plating, ceramic and black oxide
17
norway – oem electronics aBP O Box 1025 (Norrabyvägen 6B) SE-573 29 TranåsPhone: +46 75 242 45 00 | Fax: +46 75 242 45 [email protected] | www.oemelectronics.se
denmark – oem automatic klitsØ a/sEngholm Parkvej 4 DK- 3450 AllerødPhone: +45 70 10 64 00 | Fax: +45 70 10 64 [email protected] | www.oemklitso.dk
the Baltics – oem eesti oÜKanali tee 1-328, EE-10112 TallinnPhone: +372 6550 871 | Fax: +372 6550 873 [email protected] | www.oem.ee
encaPsulants
PRODUCT DesCRiPTiOn/APPLiCATiOn POT Life AT 25 ºC
ReCOMMen-DeD CURe
fLOW PROPeRTies
visCOsiTY AT 25ºC Tg. ºC CTe (1)
(PPM/ºC) % fiLLeR sTORAge TeMP.
fP4451 flow Control Barrier 24 hrs.
30 min. at 125 °C
+ 90 min. at 165 °C
None 860,000 cps 145 24 72 -40 °C
Semiconductor Liquid Encapsulants Flow Control / Dam Materials
Semiconductor Liquid Encapsulants.
Henkel´s co-cure dam and fill encapsulants cure in one easy step, requiring no pre-cure of the
dam material. High purity liquid epoxy encapsulants are designed to work together as dam and
fill materials for bare chip encapsulation, protecting gold wire bonds and silicon die from mecha-
nical damage and corrosion.
Chip on Board Liquid Encapsulants.
These products cure to form void-free globs when exposed to heat, with formulations for low CTE,
minimizing stress on wire bonds during thermal cycling. These encapsulants are easy-to-dispense,
minimize induced stresses, provide improved temperature cycling performance, and offer excel-
lent chemical resistance.
PRODUCT DesCRiPTiOn/APPLiCATiOn POT Life AT 25 ºC
ReCOM-MenDeD CURe
fLOW PROPeRTies
visCOsiTY AT 25ºC Tg. ºC CTe (1)
(PPM/ºC) % fiLLeR sTORAge TeMP.
fP4450 ICs, COB, BGA, PGA 3 days
30 min. at 125 °C
+ 90 min. at 165 °C
High 50,000 cps 155 22 73 -40 °C
fP4470 Lead-free Packages 5 days
30 min. at 125 °C
+ 90 min. at 165 °C
High 48,000 cps 148 18 75 -40 °C
Fill Encapsulants
PRODUCT DesCRiPTiOn/APPLiCATiOn POT Life AT 25 ºC
ReCOM-MenDeD CURe
fLOW PROPeRTies
visCOsiTY AT 25ºC Tg. ºC CTe (1)
(PPM/ºC) % fiLLeR sTORAge TeMP.
eO1016 COB, Watch ICs 3 months 15 min. at 150 °C Medium 70,000 cps 115 40 40 4 °C
eO1060 Chip on Board 25 days 4-6 hrs. at 125 °C High 15,000 cps 125 40 61 4 °C
fP4401 Chip on Board 24 hrs.
3 hrs. at 170 °C or
6 hrs. at 150 °C
Low 375,000 cps 160 22 75 -40 °C
Clip on Board Liquid Encapsulants
18
sweden – oem electronics aBP O Box 1025 (Norrabyvägen 6B) SE-573 29 TranåsPhone: +46 75 242 45 00 | Fax: +46 75 242 45 [email protected] | www.oemelectronics.se
finland – oem electronics oyFiskarsinkatu 3 FI-20750 TurkuPhone: +358 207 499 300 | Fax: +358 207 499 496 [email protected] | www.oemelectronics.fi
Poland – oem electronics Plul. Postepu 2, PL-02-676 WARSZAWAPhone: +48 22 863 27 22 | Fax: +48 22 863 27 24
[email protected] | www.oemelectronics.pl
circuit Board Protection AND UNDERFILLS
Henkel´s potting and encapsulation compounds protect PCBs and electrical devices by
enhancing mechanical strength, providing electrical insulation, and increasing vibration and
shock resistance.
PRODUCT DesCRiPTiOn TYPe POT Life visCOsiTY CPs CURe CYCLe seCOnDARY CURe
DeLeCTRiC sTRenghT (v/MiL/Kv/CM)
TeMP. RAnge
PC 18
- A one component solvent based Acrylic conformal coating specifically designed as a toluene free alternative.- Application by non-atomized selective spray coating equipment.- Components and joints may be repaired by heating the coating with a soldering iron for easy removal.
urethane 60 min.tack free 350
Heat 2 hrs. at 125 °C
5-7 days at RT 1200/472continuous
up to 110 ºC
PC 28
- Solvent-based, oxygen curing, coating exhibiting superior toughness with abrasion and solvent resistance. - Apply by brush, dip or spray procedures
urethane 60 min.tack free 35
Heat 5-7 days at
25 °C
Air Dry 30-60 min. followed by
2-4 hrs. at 60 °C1500/591
continuous up to
110 ºC
PC 62
- Solvent-based, coating exhibiting superior toughness with abrasion and solvent resistance.- Apply by brush, dip or spray to meet MIL-I-46058C, Type PuR, requirements
Acrylic confor-
mal
5 min. tack free 40-60 24 hours
at 25°C45 minutes
at 75°C N/A –40 -125°C
5293
- uV Silicone for severe temperature cycling environments.- High reliability automotive- No solvents- Low VOC
Silicone N/A 600uV 20-40
sec.75mW/cm2
MoistureTack free:2-6 hrs.full cure: 72 hrs
406/160 -40 -204 °C
Conformal Coatings
PRODUCT DesCRiPTiOn/APPLiCATiOn visCOsiTY AT 25°C POT Life CURe
sCheDULe Tg. °C CTe(1) (PPM/°C)
CAPiLLARY fLOW sTORAge TeMP.
3513 Reworkable CSP 4,000 cps 2 days 30 min at 100 °C 69 70 N/A 2 °C - 8 °C
3593 Snap Cure Rapid flow CSP 4,500 cps 7 days 5 min at 150 °C 110 50 100 sek. 2 °C - 8 °C
Semiconductor Liquid Encapsulants CSP and DCA Underfill Encapsulants
Hysol® package level underfill encapsulants meet stringent JEDEC level testing requirements
and are compatible with the high temperature processing required for lead free assembly. Our
green materials are developed to meet demanding end use requirements, including low war-
page/low stress, fine pitch, high reliability, and high adhesion. Loctite CSP/BGA underfills offer
easy reworkability as well as excellent vibration and impact resistance. These underfills offer
many processing advantages such as fast flow, fast cure, and long pot life.
19
norway – oem electronics aBP O Box 1025 (Norrabyvägen 6B) SE-573 29 TranåsPhone: +46 75 242 45 00 | Fax: +46 75 242 45 [email protected] | www.oemelectronics.se
denmark – oem automatic klitsØ a/sEngholm Parkvej 4 DK- 3450 AllerødPhone: +45 70 10 64 00 | Fax: +45 70 10 64 [email protected] | www.oemklitso.dk
the Baltics – oem eesti oÜKanali tee 1-328, EE-10112 TallinnPhone: +372 6550 871 | Fax: +372 6550 873 [email protected] | www.oem.ee
circuit Board Protection AND UNDERFILLS
PRODUCT DesCRiPTiOn/APPLiCATiOn PACKing size
sC01 - SC01 is designed for the stencil cleaning and hand cleaning of solder process residues. - A highly effective cleaner that dries rapidly (fast evaporation). 5 L
MCf800 - MCf800 is designed for post soldering cleaning using cleaning process equipment. - Highly effective cleaner, requires rinse using either water or solvent. 8 ML
sPOT OnsOLDeR MAsK
- Temporary solder resists used with circuit boards prior to soldering. - Ideal for prevention of PTH hole filling and for the protection of contact surfaces e.g. edge connections. - Suitable for use with hand, robotic, pneumatic or template screening applications and brush. - Peelable for easy removal.
250 ML5 L
TTC-Lf
- Handy, non-abrasive solder iron tip-tinner. - Easily wets hot solder irons leaving a brightly tinned tip. - Improves hand soldering efficiency and extends tip life. - Adhesive pad allows easy mounting on or near the solder iron holder.
15 G
sTW 001 - Stencil Wipes 100 wipes/can
cleaners AND OTHER PRODUCTS
PRODUCT DesCRiPTiOn/APPLiCATiOn TYPe AvAiLABLe WiDThs
nO-CLeAn DesOLDeRing
WiCKs
- fast, easy means of removing solder. - No-clean, High activity flux means minimal cleaning is required. - Comprehensive range available
NC-00 NC-AA NC-AB NC-BB
0.8 MM 1.5 MM 2.2 MM 2.7 MM
PRODUCT DesCRiPTiOn/APPLiCATiOn RAnge AvAiLABLe
Mini fLUXeRs & CLeAneRs
- Controlled release flux and cleaner pen applicators. - Ideal for controlled application of flux when carrying out SMT re-work. - Cleaner pen easily removes residues.
No clean flux x335-07i penCleaner MCf-800 pen
Multicore NC-BB™
SOLDER ACCESSORIES
Mini fluxers (flux Pen) Wicks
Multicore Spot-On™
Solder Masks Mini Cleaners Tip Tinners
Multicore MCf800™
Multicore SC01™
Multicore TTC-Lf™
Multicore NC-00™
Multicore NC-AA™
Multicore NC-AB™
No Clean
Multicore x33S-07i
soldering STATIONS
soldering STATIONS
22
23
24
sweden – oem electronics aBP O Box 1025 (Norrabyvägen 6B) SE-573 29 TranåsPhone: +46 75 242 45 00 | Fax: +46 75 242 45 [email protected] | www.oemelectronics.se
finland – oem electronics oyFiskarsinkatu 3 FI-20750 TurkuPhone: +358 207 499 300 | Fax: +358 207 499 496 [email protected] | www.oemelectronics.fi
Poland – oem electronics Plul. Postepu 2, PL-02-676 WARSZAWAPhone: +48 22 863 27 22 | Fax: +48 22 863 27 24
[email protected] | www.oemelectronics.pl
sYsTeM/ PART nO DesCRiPTiOn nOMinAL POWeR TOTAL PeAK POWeR TeMP. seLeCTiOn BeTWeen
BD-2BABD-2SA
Digital soldering station with 2-lines readout display and menu for modification of values from original setting 75W 60/140 W 90-450 °C
CD-2BASoldering station 230V for general electronics jobs. Includes control unit BD, handpiece T245-A, cartridges C245-003 and C245-007
75W 140 W 90-450 °C
CD-2SASoldering station 230Vfor high precision solder joints.Incudes control unit BD, handpiece T210-A, cartridge C210-001 and 210-008
75W 60 W140 W 90-450 °C
Entry line Soldering Stations
soldering and DESOLDERING STATIONS
Single line Soldering StationssYsTeM/ PART nO DesCRiPTiOn nOMinAL POWeR TOTAL PeAK POWeR TeMP. seLeCTiOn BeTWeen
Cf-2A
Solder feed station 230VDesigned for repetitive soldering or when you need a free hand. Equiped with solder feed iron of 1mm diameter.Includes AP control unit, AP-A solder feed iron, C130-403 cartridge.
75W 140 W 90-450 °C
CP-2AMicro tweezers station 230Vfor soldering and desoldering SMD components with micro-tweezer. Includes control unit PA, PA-A micro hot tweezers and 2 x C120-002 cartridge.
2 x 20W 2 x 40 W 90-450 °C
Single line Desoldering StationssYsTeM/ PART nO DesCRiPTiOn nOMinAL POWeR TOTAL PeAK POWeR TeMP. seLeCTiOn BeTWeen
CS-2A
Electric system 230VElectric suction system powered by control unit DSV or electric vacuum pump MS-A.Includes control unit DSV, DS-A micro desoldering iron with tip C360-004, MS-A electric vacuum pump.
20W 30 W 300-450 °C
CV-2A
Pneumatic system 230VPneumatic suction system with dial for temperature selection. Includes control unit DSV, DS-A micro desoldering iron with tip C36-004, pneumatic suction system feeded by compresed air max 6 bar.
20W 30 W 300-450 °C
25
norway – oem electronics aBP O Box 1025 (Norrabyvägen 6B) SE-573 29 TranåsPhone: +46 75 242 45 00 | Fax: +46 75 242 45 [email protected] | www.oemelectronics.se
denmark – oem automatic klitsØ a/sEngholm Parkvej 4 DK- 3450 AllerødPhone: +45 70 10 64 00 | Fax: +45 70 10 64 [email protected] | www.oemklitso.dk
the Baltics – oem eesti oÜKanali tee 1-328, EE-10112 TallinnPhone: +372 6550 871 | Fax: +372 6550 873 [email protected] | www.oem.ee
soldering and DESOLDERING STATIONS
sYsTeM/ PART nO DesCRiPTiOn nOMinAL
POWeRTOTAL PeAK POWeR
TeMP. seLeCTiOn BeTWeen WeighT
DIT-2A Soldering station 230Vfor general electronic applications. Includes control unit DI-2A, stand AD-SA, soldering iron T245-A and cartridge C245-003
75 W 140 W 300-450 ºC 2 kg
DIR-2ASoldering station 230Vfor high and medium precision solder-joints.Includes control unit DI-2A, soldering iron T210-A, cartridge C210-001 ad stand AD-SA
75 W 140 W60 W 300-450 ºC 2 kg
DIT and DIR Soldering Stations, one channel
DIS Desoldering StationsYsTeM/ PART nO DesCRiPTiOn nOMinAL
POWeRTOTAL PeAK POWeR
TeMP. seLeCTiOn BeTWeen WeighT
DIS-2A
Desoldering station 230V.for desoldering insertion componenets and cleaning circuits with SMD components.Includes control unit DI-2A, desoldering iron with tip C560-003, stand DR-SA, MS-A suction module electric system and accessories set.
75 W 140 W 300-450 ºC 2 kg
DSS-2A
Micro desoldering station 230V.for desoldering small and medium-sized insertion components; high-precision station with small measurements. Includes control unit DI-2A, desoldering iron DS-A with tip C360-004, stand DS-SA, MS-A suction module electric system and accessories set.
75 W 140 W 300-450 ºC 2 kg
DIN Nitrogen Soldering Station 230VsYsTeM/ PART nO DesCRiPTiOn nOMinAL
POWeRTOTAL PeAK POWeR
TeMP. seLeCTiOn BeTWeen WeighT
DIN-2A
The DIN-2A nitrogen soldering station combines 2 ways of transferring heat: - By direct contact between the solder tip and the solder joint, just like a normal soldering iron. - By nitrogen which is heated when flowing through the soldering tip. Includes DI-SA control unit, stand DN-SA, nitrogen handpiece T245-NA with C245-003.MN-A nitrogen flow regulator. N2 flow regulation:: 0,5-3,5 LPM at 5 Bar.Max pressure:6 Bar.
75 W 140 W 90-450 ºC 1,2 kg
sYsTeM/PART.nO DesCRiPTiOn
GN-A
Compressed air pressure: 4 to 6 Bar•Gas N2 concentration: up to 99,9%•Concentraded N2 gas flow: 1 to 2 NL/min.•Weight: 2 kg•
GN-A Nitrogen module generatorAn externa nitrogen circuit is needed or the nitrogen generator from jBC GN-A
soldering and DESOLDERING STATIONS
26
sweden – oem electronics aBP O Box 1025 (Norrabyvägen 6B) SE-573 29 TranåsPhone: +46 75 242 45 00 | Fax: +46 75 242 45 [email protected] | www.oemelectronics.se
finland – oem electronics oyFiskarsinkatu 3 FI-20750 TurkuPhone: +358 207 499 300 | Fax: +358 207 499 496 [email protected] | www.oemelectronics.fi
Poland – oem electronics Plul. Postepu 2, PL-02-676 WARSZAWAPhone: +48 22 863 27 22 | Fax: +48 22 863 27 24
[email protected] | www.oemelectronics.pl
sYsTeM/PART nO DesCRiPTiOn nOMinAL POWeR
TOTAL PeAK POWeR
sLeeP MODe POWeR
hiBeRnATiOn MODe POWeR WeighT
TeMP. seLeCTiOn BeTWeen
DDsT-2A
Soldering and desoldering station 230 V The station offers a complete solution for fast and safe repair of insertion component circuits by suction of hte solder. The station can also be used for cleaning pads in SMD circuits.
2 x 75W 2 x 140W 2 x 10W 2 x 4W 4.5 kg 90-450 °C
DDST Rework Station
sYsTeM/PART nO DesCRiPTiOnMAXi-MUM POWeR
TeMP.seLeCTiOn
TeMP. ROOM
AiR fLOW RegULATiOn
PROTeCTeD AgAinsT AnTisTATiC DisChARge
TOTAL WeighT
jT-2A
A high power hot air station used for desoldering all types of SMD's. Its powerful heater desolders even the biggest QfPs and PLCCs quickly and safely. Desoldering small and mediumsized BGAs is done in a very short time.
1000 W °C room -
450°C and "cool"
6-45 l/min Yes 8,7 kg
JT High Power Hot Air Station 230 V
sYsTeM/PART nO DesCRiPTiOnPOWeR MAX OUT
TeMP. seLeCTiOn
vARiABLe AiR fLOW seTTings
TOTAL WeighT
Te-2AA precision hot air station ideal for soldering and desoldering small and medium-sized SMD components.Autonomus hot air station, digital, thermo regulated with air flox control.
300 Wroom -
450°C and "cool"
between 4 and 11 l/
min6,7 kg 90-450 °C
TE Hot Air Station 230V
inCLUDes
Control unit DD-2AHandspiece T245-ACartridge C245003Desoldering DR-ATip C560-003Stand AD-SA and DR-SASuction electrical system MS-ASet of tools and accessories
inCLUDes jT-2A inCLUDes jT-2QA
Control unit jTE-2AHeater 1000 WExtractor stand with 5 extractors, 5 protectors and 2 tripodsHeater standSet of accessories
Control unitStandHeater handle 1000 W No accessories
inCLUDes Te-2A inCLUDes Te-2QA
Control unit jTE-2AHeater 300 WHeater stand jT-SAAccessoriesExtractor stand with 2 tripods, 3 extractros and 5 protectors
Control unitStandHeater handle 300 W No accessories
soldering and DESOLDERING STATIONS
27
norway – oem electronics aBP O Box 1025 (Norrabyvägen 6B) SE-573 29 TranåsPhone: +46 75 242 45 00 | Fax: +46 75 242 45 [email protected] | www.oemelectronics.se
denmark – oem automatic klitsØ a/sEngholm Parkvej 4 DK- 3450 AllerødPhone: +45 70 10 64 00 | Fax: +45 70 10 64 [email protected] | www.oemklitso.dk
the Baltics – oem eesti oÜKanali tee 1-328, EE-10112 TallinnPhone: +372 6550 871 | Fax: +372 6550 873 [email protected] | www.oem.ee
sYsTeM/PART nO DesCRiPTiOn nOMinAL POWeR
TOTAL PeAK POWeR
sLeeP MODe
hiBeRnATiOns MODe
TeMP. RAnge WeighT
HD-2A Ideal solution for high thermal demand and prolonged heavy duty soldering applications. Specifically designed for extensive soldering of multi-layerd circuits and parts which require high remperatures.
145 W 270 W 20 W 9 W 90-500ºC 4,5 kg
HD Heavy Duty Station 230 V
AL Automatic Solder Feed Station 230 V
PRODUCT DesCRiPTiOn PART nO
AL-iA Indispensable for using the AL system while having both hands free. for this purpose it is also necessary to use the pedal set
0964551
AL-IA Hands-free soldering arm for soldering iron AL
sYsTeM/PART nO DesCRiPTiOn nOMinAL POWeR
TOTAL PeAK POWeR
sLeeP MODe
hiBeR-nATiOns MODe
sOLDeR WiRe DiAM-TeRs
TeMP. RAnge WeighT
AL-2A Ideal solution for extensive soldering application, and any soldering application that requires one or two free hands.
75 W 140 W 10 W 4 W 0,5 - 1,5 mm 90-500ºC 3,2 kg
AM Rework Station 230 VsYsTeM/PART nO DesCRiPTiOn nOMinAL
POWeRPeAK POWeR
POWeR hOT AiR UniT
sOLDeRing iROn TeMP RAnge
DesOLDeRing iROn TeMP RAnge
hOT AiRTeMP. RAnge
AM-2A
Designed for rework and repair of through-hole and SMT boards. The station´s 4 modules offer the following rework/repair operations: - Desoldering of SMD components of any size by hot air.- Desoldering SMT and through-hole components.- Pick & Place tip for placing components. - Soldering of any kind of components.
2 x 75 W 2 x 140 W 900 W 90-450ºC 300-450ºC 150-450ºC
inCLUDes
Control unit HD-2AHandspiece T245-ACartridge C470003Stand AD-SA
inCLUDes
Control unit AL-2AComplete handle AL-ACartridge C250403Stand AL-SATubes set and guides for: wires ø 0,9 - 1 mm: 00024101
inCLUDes AiR fLOW RegULATiOn
vACUUM PUMP fOR hOLDing iCs WeighT sLeeP MODe hiBeRnATiOns
MODe
Control unit AM-2AT245 handpiece with cartridge C245003DR-A desoldering iron with the C560-003 tip heater 1000W.MP 2260 Pick & Place Extractor stand with.5 extractors, 5 prtectors and 2 tripods.Stands for soldering iron, desoldering iron and heater. Set of accessories.
6-45 l/minx 8,1 kg 2 x 10 W 2 x 6 W
soldering and DESOLDERING STATIONSsoldering and DESOLDERING STATIONS
28
sweden – oem electronics aBP O Box 1025 (Norrabyvägen 6B) SE-573 29 TranåsPhone: +46 75 242 45 00 | Fax: +46 75 242 45 [email protected] | www.oemelectronics.se
finland – oem electronics oyFiskarsinkatu 3 FI-20750 TurkuPhone: +358 207 499 300 | Fax: +358 207 499 496 [email protected] | www.oemelectronics.fi
Poland – oem electronics Plul. Postepu 2, PL-02-676 WARSZAWAPhone: +48 22 863 27 22 | Fax: +48 22 863 27 24
[email protected] | www.oemelectronics.pl
sYsTeM/PART nO DesCRiPTiOn nOMinAL POWeR
PeAK POWeR TeMP RegULATiOn WeighT
nAsT-2A A complete station designed for micro soldering and desoldering of small-size components like chips 0201, 0402 etc.
15W 30W 90-450 °C 2.6 kg
NAST Nano Station 230 V
sYsTeM/PART nO DesCRiPTiOn nOMinAL POWeR
PeAK POWeR
sLeeP POWeR
hiBeRnATiOn POWeR
TeMP. seLeCTiOn WeighT
Di-2A 1-tool digital control unit features a digital read-out display for accurate temperature and tool control.
75 W 140 W 10 W 4 W 90-450 °C 2 kg
DI-2A 1 Tool Control Unit
sYsTeM/PART nO DesCRiPTiOn nOMinAL POWeR
TOTAL PeAK POWeR
sLeeP POWeR
hiBeRnATiOns POWeR
TeMP.seLeCTiOn WeighT
DD-2A
2 tools control unit 230 VOffers connectivity for working with 2 tools simultaneously.. Designed for production and rework applications with high thermal requirements.
2 x 75W 2 x 140W 2 x 10W 2 x 4W 90-450 °C 3,5 kg
DM-2A
4 tools control unit 230 VOffers connectivity for working with 4 tools simultaneously.. Designed for production and rework applications with high thermal requirements.
4 x 75W 4 x 140W 4 x 10W 4 x 4W 90-450 °C 4,5 kg
DD and DM 2- & 4- Tools digital Control Units
inCLUDes
Control unit NA-2ANano soldering iron NT205-ANano tweezers NP105-ACartridge set (10 pcs)
fOR A COMPLeTe sTATiOn fOLLOWing is neeDeD
Control unitOne tool with corresponding stand & cartridge
fOR A COMPLeTe sTATiOn fOLLOWing is neeDeD
Control unitfrom 1 to 4 tools with its corresponding stand & cartridge
soldering and DESOLDERING STATIONS
29
norway – oem electronics aBP O Box 1025 (Norrabyvägen 6B) SE-573 29 TranåsPhone: +46 75 242 45 00 | Fax: +46 75 242 45 [email protected] | www.oemelectronics.se
denmark – oem automatic klitsØ a/sEngholm Parkvej 4 DK- 3450 AllerødPhone: +45 70 10 64 00 | Fax: +45 70 10 64 [email protected] | www.oemklitso.dk
the Baltics – oem eesti oÜKanali tee 1-328, EE-10112 TallinnPhone: +372 6550 871 | Fax: +372 6550 873 [email protected] | www.oem.ee
sYsTeM/PART nO DesCRiPTiOn POWeR sUPPLY TYPiCAL sURfACe ResisTAnCe
ReCOMMenDeD AiR PRessURe WeighT
Ms-AMS-A electric suction moduleElectric suction module with overdrive startup funtion that offers quick collection of solder before it cools down. This suction system is regulated by the control unit.
12 W 24 V 1015-1011 - 1,7 kg
Mv-A
MV-A pneumatic suction moduleThis pneumatic suction module uses compressed air and a Venturi valve. This system offers outstanding desoldering results because of its immediate suction responsiveness. This suction system is powered by compressed unit.
3 W 24 V 1015-1011 5 Bar (max 6) 1,4 Kg
MS-A and MV-A Desoldering Suction Modules
tip tinner tt-a
for chemical cleaning and tinning the tip at the same
time. Very efficient.
cleaning sand cl6780
The most "aggressive" method to clean even the most oxidated tips.
metal wool cl6205
Dry cleaning method, indispensable for lead-free soldering. Removes oxidation and facilitates tinning.
metal brush cl6217
Cleans tips, tweezers and desoldering irons the same way as metal wood.
stand accesory + sponge s7080
dry cleaning system + metal wool cl6760
dry cleaning + sand cl6780
stand
Cleaning of Tips
soldering and DESOLDERING STATIONSsoldering and DESOLDERING STATIONS
30
sweden – oem electronics aBP O Box 1025 (Norrabyvägen 6B) SE-573 29 TranåsPhone: +46 75 242 45 00 | Fax: +46 75 242 45 [email protected] | www.oemelectronics.se
finland – oem electronics oyFiskarsinkatu 3 FI-20750 TurkuPhone: +358 207 499 300 | Fax: +358 207 499 496 [email protected] | www.oemelectronics.fi
Poland – oem electronics Plul. Postepu 2, PL-02-676 WARSZAWAPhone: +48 22 863 27 22 | Fax: +48 22 863 27 24
[email protected] | www.oemelectronics.pl
stands and TOOLS
sYsTeM/PART nO fOR hAnDPieCe inCLUDes
AD-SAT210-A•T245-A•
Dry cleaning module with metal wool•3 cartridges extractor magazine for C210 or C245•Quick cartridges change•Sleep mode•
PA-SA for PA-A micro hot tweezers• Sponge stand •Sleep mode•
DR-SA for DR-A desoldering iron• Brush and sponge stand•Sleep mode•
AP-SA for AP-A solder feed iron• Sponge stand •Sleep mode•
HT-SA for HT-A hot tweezers• Sponge stand•Sleep mode•
AD-SA for AP-A solder feed iron• Sponge stand •Sleep mode•
HT-SA for HT-A hot tweezers• Sponge stand•Sleep mode•
DS-SA for DS-A micro desoldering iron• Brush and sponge stand•Sleep mode•
TOOLs sYsTeM/PART nO DesCRiPTiiOn
NANOThe smallest soldering tools available in the market
NP-A• uses cartridges C105•Perfect for soldering and desoldering very smal-sized chip components.•
NT-A• uses cartridges C105•for high-precision soldering jobs•
Handpiece T-210-A•for precision applications•used with C210 cartridges•Offers quick cartridge change•
T245Handpiecefor general soldering jobs in elec-tronics
T-245• Offers • quick cartridge change
T245-fA• A screw in this handpi• ece allows fixation of cartridges, ideal for high-intensity jobs that do NOT require frequent change of cartriges.
T245Comfort handpiecesSame characteristics as T245.Neoprene grip, thermally isolating and giving more comfort to the user. Ideal for intensive soldering.
T245-CA• Quick cartridge change•
T245-TA• Handpiece incorporates a screw that allows to fix the cartridges•Ideal for high intensity jobs where NO cartridge change is needed•
T245-SA• A screw in this handpiece helps to securely fix the cartridge, ideal for extensive soldering jobs that do NOT •require frequent cartridge changes. Supplied with a cable of 3 m lenght.
31
norway – oem electronics aBP O Box 1025 (Norrabyvägen 6B) SE-573 29 TranåsPhone: +46 75 242 45 00 | Fax: +46 75 242 45 [email protected] | www.oemelectronics.se
denmark – oem automatic klitsØ a/sEngholm Parkvej 4 DK- 3450 AllerødPhone: +45 70 10 64 00 | Fax: +45 70 10 64 [email protected] | www.oemklitso.dk
the Baltics – oem eesti oÜKanali tee 1-328, EE-10112 TallinnPhone: +372 6550 871 | Fax: +372 6550 873 [email protected] | www.oem.ee
tools and CARTRIDGES
TOOLs sYsTeM/PART nO DesCRiPTiOn
Microtweezers
PA-A• Designed for soldering and desoldering SMD micro components•Each cartridge is individually controlled by the control unit, guaranteeing fast heating-up, accuracy and recovery of temperature•The available range of cartridge is made for desoldering a wide range of components.•Connected to jBc stations, DI, DD, DM, AM and single line AP.•Supplied without cartridges.•
TweezersHT-A• Specially for soldering and desoldering small and medium-sized SMD components. A cable strip cartridge is also available.•
Each cartrdge is individually controlled by the control unit, guaranteeing fast heating-up, accuracy and recovery of temperature.•Conntcted to jBC station DI, DD, DM AM and single line AP•
Microdesoldering irons
DS-A• Adapts to the ever-decreasing size of new components.•Very easy cleaning and maintenance. Tips are easily inserted by gentle pushing•Contacted to jBC stations DS-2A, DV-2A, DI, DD, DM, AM and single line AP•Supplied with tip C360-004•
Desoldering ironDR• Very easy cleaning and maintenance•
Two different types of solder residue chambers are available: metal and glass•Tips are easily palced by thread•Supplied with tip C560-003•
Soldering wire feeding ironAP-A• Offers a "third hand" by feeding soldering wire from diamters 0.8 to 1 mm. Specifically helpful for high-volume soldering jobs, •
and whenever an extra hand is needed.Connected to jBC stations DI, DD, DM, AM and single line AP•Supplied wiht cartrigde C130-403•
Solder reelsSN5450• Solder reels for AP-A•
The soldering irons are fitted with lead free solder reel - 99% Sn/0.3% Ag/0.7 Cu - with 50g solder.•
Cartridges
32
sweden – oem electronics aBP O Box 1025 (Norrabyvägen 6B) SE-573 29 TranåsPhone: +46 75 242 45 00 | Fax: +46 75 242 45 [email protected] | www.oemelectronics.se
finland – oem electronics oyFiskarsinkatu 3 FI-20750 TurkuPhone: +358 207 499 300 | Fax: +358 207 499 496 [email protected] | www.oemelectronics.fi
Poland – oem electronics Plul. Postepu 2, PL-02-676 WARSZAWAPhone: +48 22 863 27 22 | Fax: +48 22 863 27 24
[email protected] | www.oemelectronics.pl
cartridges
work ENVIRONMENT
34
sweden – oem electronics aBP O Box 1025 (Norrabyvägen 6B) SE-573 29 TranåsPhone: +46 75 242 45 00 | Fax: +46 75 242 45 [email protected] | www.oemelectronics.se
finland – oem electronics oyFiskarsinkatu 3 FI-20750 TurkuPhone: +358 207 499 300 | Fax: +358 207 499 496 [email protected] | www.oemelectronics.fi
Poland – oem electronics Plul. Postepu 2, PL-02-676 WARSZAWAPhone: +48 22 863 27 22 | Fax: +48 22 863 27 24
[email protected] | www.oemelectronics.pl
The world technical leader in air pollution systems
Filtronic's business concept is to develop and manufacture mobile filter systems by creating
a better workbench environment and protect individuals and products from hazardous gases
and particles.
filter SySTEM
high airflow systems
extract arm concept
cBc-clean Bench concept
high vacuum systems
35
norway – oem electronics aBP O Box 1025 (Norrabyvägen 6B) SE-573 29 TranåsPhone: +46 75 242 45 00 | Fax: +46 75 242 45 [email protected] | www.oemelectronics.se
denmark – oem automatic klitsØ a/sEngholm Parkvej 4 DK- 3450 AllerødPhone: +45 70 10 64 00 | Fax: +45 70 10 64 [email protected] | www.oemklitso.dk
the Baltics – oem eesti oÜKanali tee 1-328, EE-10112 TallinnPhone: +372 6550 871 | Fax: +372 6550 873 [email protected] | www.oem.ee
sYsTeM DesCRiPTiOn
MAX sUCTiOn CAPACiTY M3/h
BLOWeR CAPAsiTY M3/h
sOUnD LeveL DB(A), AT 1 M.
MiCROfiLeR sePARATiOn DegRee DOP%
gAs fiLTeR-CheMi-sORBTiOn-sePARATiOn DegRee %
POWeRsize(WhD) WeighT
ReMOTe COnTROL
PART nO
vOLTAge PRe fiLTeR
Mg 75
High efficiency fume extraction with a wide range of filters depending on applications. It meets the demands for work in cleanroom. The MG75 is a filter unit with connection for one extraction arm. Remote control for variable speed, filter lifetime indication and alarm functions.
75 100 38-49 >99.97 >95
100
465mm640mm220mm
15 kg
Yes
750-1000-ESD750-1010-ESD
100/-250V Accessory
Mg 95
High efficiency fume extraction with a wide range of filters depending on applications. It meets the demands for work in cleanroom. The MG95 is a filter unit with connection for one or two extraction arms. Remote control for variable speed, filter lifetime indication and alarm functions.
100 140 38-50 >99.97 >95
100465mm640mm220mm
18 kg
Yes
950-1000-ESD950-1010-ESD
100/-250V Accessory
Mg 100
fume extraction system with high efficiency filter. Connection for one or two arms. The system can be set in variable speed and has an alarm function for filter lifetime indication.
100 140 <52 >99.97 >95
100W460mm640mm210mm
15 kg
No100-1000-ESD100-1032-ESD100-1055-ESD100/-
250V Accessory
Mg 200
High efficiency fume extraction system with integrated pre filter and a combined particle and gas filter. Wide range of filters depending on application. Meets the demands for work in cleanroom. Remote control for filter lifetime indication, variable speed and alarm functions.
200 310 <55 >99.95 >95
300W400mm1016mm402mm
43 kg
Yes
200-1000-ESD
115/-230V Yes
Mg 400
High efficiency fume extraction system with integrated pre filter and a combined particle and gas filter. Wide range of filters depending on application. Meets the demands for work in cleanroom. Remote control for filter lifetime indication, variable speed and alarm functions.
400 450 >55 99.97 >95
300W796mm1016mm402mm
68 kg
Yes
450-1000-ESD
115/-230V Yes
filter SySTEM
sYsTeM DesCRiPTiOn TeChniCAL DATA PART nO
Pre-filterA pre-filter for the high airflow systems MG 75, 95 and 100. •The pre filter is mounted on the filter system. •The filter media is of a “bag” type model with a high separation degree.•
Pre filter bag active area 25 dm²Pre filter bag Class f8
Pf-1200
TrolleyTrolley for MG75 and MG95. An easy solution to get the filter system even more mobile. •Arm brackets for the extraction arm is included 450 x 450 x 750 mm (WxDxH)) 950-3202-EDS
Bench mounting set Bench mounting set for MG100. To be mounted on the edge of the workbench.• 780-3001-ESD
Remote control Remote control to MG units . • 700-3057
Connection hoseConnection hose with quick-connection, aluminium covered •Available from 1-5 meter length. ø 65 mm (diameter) On request
Accessories
36
sweden – oem electronics aBP O Box 1025 (Norrabyvägen 6B) SE-573 29 TranåsPhone: +46 75 242 45 00 | Fax: +46 75 242 45 [email protected] | www.oemelectronics.se
finland – oem electronics oyFiskarsinkatu 3 FI-20750 TurkuPhone: +358 207 499 300 | Fax: +358 207 499 496 [email protected] | www.oemelectronics.fi
Poland – oem electronics Plul. Postepu 2, PL-02-676 WARSZAWAPhone: +48 22 863 27 22 | Fax: +48 22 863 27 24
[email protected] | www.oemelectronics.pl
working TABLE
Abraflex produces equipment for the production environment. They primarily market the
electronic business and are fully familiar with the complete esd concept. Keywords for
Abraflex are stability, flexibility and ergonomics.
PRODUCT nO DesCRiPTiOn PRODUCT nO DesCRiPTiOn
35sC135esD Electric Table stand 1050x685mm max last 200kg 35sC136esD Electric Table stand 1350x685mm 200kg
35sC137esD Electric Table stand 1850x685mm 200kg 35998 Wheel undercarriage for above (Pair)
35sf135esD Reinforced electric table stand 1050X685mm 300KG 35sf136esD Reinforced electric Table stand 1350x685mm 300kg
35sf137esD Reinforced electric Table stand 1850x685mm 300kg 35999 Wheel undercarriage for above (pair)
35 203 Table top 1100x800x21mm, beige laminate 35 204 Table top 1500x800x21mm, beige laminate
35 205 Table top 2000x800x21mm, beige laminate 35 239 Table top 1100x800x21mm, grey ESD-laminate
35 240 Table top 1500x800x21mm, grey ESD-laminate 35 242 Table top 2000x800x21mm, grey ESD-laminate
35 229 Table top 1100x800x21mm, beige ESD-Norastat 35 230 Table top 1500x800x21mm, beige ESD-Norastat
35 232 Table top 2000x800x21mm, beige ESD-Norastat UUA101-6 Gantry steel ESD 1900mm grey
UUA101-2 Reinforced gantry aluminium 1900mm 35862-8601 Angelable shelf sheetmetal ESD 875x300mm with fittings
35 300 Shelf 1000x320x21mm grey ESD-laminate with fittings 35 310 Shelf 1400x320x21mm grey ESD-laminate with fittings
35 320 Shelf 1800x320x21mm grey ESD-laminate with fittings UUA 111 Power outlet, 7-way, breaker and fittings
UUA 102-esD Adjustable illumination ESD 24W High frequency UUA 105-2 Railgirder for the uuA 101-2
UUA 106 Illuminated magnifying glass with railfittings UUA 107-1 Linear railfittings for microscope
UUA112-2 Solder smoke evacuation hose for mounting with microscope ESD UUA112 Solder smoke evacuation hose with swiveling arm ESD
UUA108 Linear mounting for solderstation ESD UUA115 Drawer unit for tools ESD
37
norway – oem electronics aBP O Box 1025 (Norrabyvägen 6B) SE-573 29 TranåsPhone: +46 75 242 45 00 | Fax: +46 75 242 45 [email protected] | www.oemelectronics.se
denmark – oem automatic klitsØ a/sEngholm Parkvej 4 DK- 3450 AllerødPhone: +45 70 10 64 00 | Fax: +45 70 10 64 [email protected] | www.oemklitso.dk
the Baltics – oem eesti oÜKanali tee 1-328, EE-10112 TallinnPhone: +372 6550 871 | Fax: +372 6550 873 [email protected] | www.oem.ee
Fume cupboards
Customized fume cupboards. Manufacturing according to your
specification.
The fume cupboard opening are equipted with electrically-operated sliding
hatches designed for machines and other applications. All models are
adapted to requirements according to the customers wishes. Available in
a choice of colors according to the NCS or RAL color atlas.
Chemical cabinets
Fire-resistant cabinets for inflammable gases and chemicals. The cabinets
are equipped for ventilation installation and are available in differens sizes.
caBinets
38
sweden – oem electronics aBP O Box 1025 (Norrabyvägen 6B) SE-573 29 TranåsPhone: +46 75 242 45 00 | Fax: +46 75 242 45 [email protected] | www.oemelectronics.se
finland – oem electronics oyFiskarsinkatu 3 FI-20750 TurkuPhone: +358 207 499 300 | Fax: +358 207 499 496 [email protected] | www.oemelectronics.fi
Poland – oem electronics Plul. Postepu 2, PL-02-676 WARSZAWAPhone: +48 22 863 27 22 | Fax: +48 22 863 27 24
[email protected] | www.oemelectronics.pl
insPection & other EqUIPMENT
Optilia Instruments AB is manufacturer of high quality flexible video and
digital microscopes for visual inspection, quality control, software analysis
& measurements and digital image recording & documentation.
W10x
• Inspectioncamerawithbuilt-inlaserpointer
• 10xopticalzoomandautofocusfunction
• Analogvideosignal(PAL)
Flexia Visual Inspection & Documentation kit
• ESDProtectedandApproved
• DigitalImageRecording&Documentation
• HighImageQuality
The Dino-Lite Digital Microscopes by AnMo have created a whole new
category of products in the electronics industry. The Dino-Lite can be
connected to a computer and allows you to record moving and still images
as well as time lapse recording.
• Magnificationrangesfrom~10to200to500x.
• LEDlightsarebuiltininwhite,polarized,ultraviolet,infraredora
switchable combination.
ESD safe magazine rack
All the models are compatible with standard specs. of SMT equipment.
The unique ”smart rack” keeps cardguides absolutely parallel while providing
excellent rigidity. All the quick-width adjustment magazines are equipped with
the AJ-slope system. A large selection of magazines for special applications
can be offered for ceramic, substrate and instance heat-resistant type.
39
norway – oem electronics aBP O Box 1025 (Norrabyvägen 6B) SE-573 29 TranåsPhone: +46 75 242 45 00 | Fax: +46 75 242 45 [email protected] | www.oemelectronics.se
denmark – oem automatic klitsØ a/sEngholm Parkvej 4 DK- 3450 AllerødPhone: +45 70 10 64 00 | Fax: +45 70 10 64 [email protected] | www.oemklitso.dk
the Baltics – oem eesti oÜKanali tee 1-328, EE-10112 TallinnPhone: +372 6550 871 | Fax: +372 6550 873 [email protected] | www.oem.ee
our Business AREAS
By organising our activities into business areas we are able to offer a high level of specialised
expertise and service to our customers. Each area has its dedicated marketing organisation
complemented by interactive support functions. This gives us the considerable flexibility coupled
with guaranteed access to all of the company´s resources.
ELMECH & OPTO
The Elmech business area offers electromechanical and opto components. We supply
appliance and electronics manufacturers with standard components but also, in close
co-operation, with customised solutions.
KEYBOARDS & DISPLAYS
The Keyboards & Displays business area always focuses on and
strives for the very best solutions for display and keypad appli-
cations. The products include displays; from monochrome to
more advanced colour displays, with various touch schreen
alternatives, keyboards, keypads and complete panel
solutions - with finishing grades geared to each indivi-
dual requirement.
THERMAL & POWER
We are one of the leading players in Sweden when
it comes to temperature-related components,
working with everything from fans, heat sinks and
radiators to more complex thermal solutions. In the
power area we offer active and passive compo-
nents. We also offer components in the EMC and
RF/Microwave areas, e g absorbents, gaskets,
waveguides and filters.
New Product Area starting 1st of April 2010.
This business area also offer a wide range
of materials for industrial manufacturing
and electronic applications which
also includes bench top products
and equipment.
BY
RÅ
N I
TRA
NÅ
S 2
010
sweden
oem electronics aB
P O Box 1025 (Norrabyvägen 6B)
SE-573 29 Tranås
Phone: +46 75 242 45 00
Fax: +46 75 242 45 09
www.oemelectronics.se
finland
oem electronics oy
Fiskarsinkatu 3
FI-20750 Turku
Phone: +358 207 499 300
Fax: +358 207 499 496
www.oemelectronics.fi
Poland
oem electronics Pl
ul. Postepu 2
PL-02-676 WARSZAWA
Phone: +48 22 863 27 22
Fax: +48 22 863 27 24
www.oemelectronics.pl
norway
oem electronics aB
P O Box 1025 (Norrabyvägen 6B)
SE-573 29 Tranås Sverige
Phone: +46 75 242 45 00
Fax: +46 75 242 45 09
www.oemelectronics.se
denmark
oem automatic klitsØ a/s
Engholm Parkvej 4
DK- 3450 Allerød
Phone: +45 70 10 64 00
Fax: +45 70 10 64 10
www.oemklitso.dk
the Baltics
oem eesti oÜ
Kanali tee 1-328
EE-10112 Tallinn
Phone: +372 6550 871
Fax +372 6550 873
www.oem.ee