proceedings : evanston, il, usa, march 11 - 14, 2012 · wedgeindenters pp. 1-7. chen,ke louisiana...
TRANSCRIPT
-
TABLE OF CONTENT: 7th International Conference on MicroManufacturing
Technical Program for Monday March 12, 2012
MoA1 : 202 Northwestern
Micro-Cutting: Materials Issues (Regular Session)
10:20-10:45 MoA1.1
Instrumented Nanoindentation of Single Crystal Al with Long
Wedge Indenters pp. 1-7.
Chen, Ke Louisiana State Univ.
Meng.WenJin Louisiana State Univ.
Sinclair, G. B. Louisiana State Univ.
10:45-11:10 MoA1.2
Pressure and Temperature Effects in Silicon During IndentationTests pp. 8-13.
Ravindra, Deepak Western Michigan Univ.
Patten, John Western Michigan Univ.
Ghantasala, Muralidhar Western Michigan Univ.
11:10-11:35 MoA1.3
Micro Machining of Single Crystalline Silicon Using BiaxialVibration with Adjustable Phase and Amplitude pp. 14-19.
Chiang, H. N. National Cheng Kung Univ.
Ko, Po-Wei National Cheng Kung Univ.
Wang, J.-J. Junz National Cheng Kung Univ.
Zheng, Charles Ming National Cheng Kung Univ.
11:35-12:00 MoA1.4
Capability of Tungsten Carbide Micro-Mills to Machine HardenedTool Steels pp. 20-26.
Gilbin, Alexandre FEMTO-ST Inst. UMR CNRS
Fontaine, Michael FEMTO-ST Inst. UMR CNRS
Michel, Gerard ENSMM
Thibaud, Sebastien FEMTO-ST / Franche-Comte
Univ.
Picart, Philippe FEMTO-ST, UMR CNRS
Univ. of Franche-
Comte,Besangon
MoA2
Micromachines: Structure (Regular Session)
10:20-10:45
203 Lake
MoA2.1
A Flexure-Based Parallel-Kinematic Structure for Improvement ofParallelism in COG Bonding Process pp. 27-30.
Jeong, Young Hun Korea Pol. Univ.
10:45-11:10 MoA2.2
A Study on the Effects of Isolator, Motor and Work Surface Heightson the Vibrations of Ultra-Precision Machine Tools pp. 31-36.
Okwudire, Chinedum E. Univ. of Michigan, Ann Arbor
11:10-11:35 MoA2.3
Design and Direct Machining of Mesoscale Elastic
Structures pp. 37-41.
Jared, Bradley Sandia National Lab.
Boyce, Brad Sandia National Lab.
Knorovsky, Jerry Sandia National Lab.
Serna, Lysle Sandia National Lab.
11:35-12:00 MoA2.4
Investigation on the Machine Tool Spindle And/or Bearing Thermal
pp. 42-46.
Sarhan, Ahmed Univ. of Malaya
Matsubara, Atsushi Kyoto Univ.
MoA3 206 Arch
Laser Surface texturing (Regular Session)
10:20-10:45 MoA3.1
Surface Integrity in Laser Assisted Mechanical Micro-Machining(LAMM) oflnconel 625 pp. 47-54.
Samanta, Avik Indian Inst, of Tech. Bombay
Teli, Mahesh Indian Inst, of Tech. Bombay
Singh, Ramesh Indian Inst, of Tech. Bombay
10:45-11:10 MoA3.2
Laser Surface Texturing ofMedical Needles for Friction Control
, pp. 55-59.
Han, Peidong Northwestern Univ,
Pallav, Kumar Northwestern Univ.
Ehmann, Kornel Northwestern Univ.
11:10-11:35 MoA3.3
Experimental Characterization of Fiber Laser Based Surface
Texturing pp. 60-65.
Anand, Piyush Indian Inst, of Tech. Bombay
Bajpai, Vivek Indian Inst, of Tech. Bombay
Singh, Ramesh Indian Inst, of Tech. Bombay
11:35-12:00 MoA3.4
Micro-Texturing Onto Glassy Carbon Substrates by Multi-AxiallyControlledPico-Second LaserMachining pp. 66-73.
Aizawa, Tatsuhiko Shibaura Inst, ofTech.
Inohara, Tadahiko LIPS-Works Co. Ltd.
MpBl/;::'::Vf.. 202 Northwestern
Micro-Cutting: Surface Texturing (Regular Session)
13:00-13:25 MoB1.1
Micro Manufacturing of Micro Hierarchical Pattern Using Precision
Mechanical Machining pp. 74-77.
Choi, Soochang Korea Inst, of Machinery &Materials
Lee, Sang Min Pusan National Univ.
Park, Jong Kweon Korea Inst, of Machinary &Materials
Lee, Deug Woo Pusan National Univ.
13:25-13:50 MoB1.2
AFM Probe-Based Mechanical Machining: Modelling of the Surface
Generation Process pp. 78-84.
Elkaseer, Ahmed Cardiff Univ.
Brousseau, Emmanuel Cardiff Univ.
xxi
-
13:50-14:15 Mo81.3 13:25-13:50 MoB3.2
Efficient Machining of Micro Dimples for Friction Reduction
pp. 85-89.
Kastner, Jan Leibniz Univ. Hannover
Kayapinar, Haydar Leibniz Univ. Hannover
14:15-14:40 MoB1.4
Micro Dimple Machining with Ball End Mill pp. 90-94.
Matsumura, Takashi Tokyo Denki Univ.
Horii, Jyunichiro Tokyo Denki Univ.
Takahashi, Satoru Tokyo Denki Univ.
MoB2 203 Lake
Micromachines: Sensing (Regular Session)
13:00-13:25 MoB2.1
Study of a Vision-Based Volumetric-Error Measurment Method for
Micro Machine Tools pp. 95-98.
Wang, Shih-Ming Chung Yuan Christian Univ.
Lin, Ji-Jun Chung Yuan Christian Univ.
13:25-13:50 MoB2.2
SensorFusion for Micro Positioning.... pp. 99-104.
Kuhfuss, Bernd Univ. of Bremen, Faculty ofProduction Engineering-
Germany
Schenck, Christian Univ. of Bremen, Faculty ofProduction Engineering
Hellwig, Christian Univ. of Bremen, Faculty ofProduction Engineering
Wilhelmi, Philipp Univ. of Bremen
13:50-14:15 MoB2.3
Identification of Dynamometer Dynamics for AccurateMeasurement of Micro-Cutting Forces pp. 105-109.
Korkmaz, Emrullah Carnegie Mellon Univ.
Gozen, BulentArda Carnegie Mellon Univ.
Bediz, Bekir Carnegie Mellon Univ.
Ozdoganlar, Burak Carnegie Mellon Univ.
14:15-14:40 MoB2.4
Initial Study on the High-Speed, High-Precision Micromilling of
pp. 110-117.
Liles, Howard Georgia Inst, of Tech.
Mayor, J.Rhett Georgia Inst, of Tech.
MoB3': 206Arch.EDM 1 (Regular Session)
13:00-13:25 MoB3.1
Modeling of Micro Wire EDM Process and Wire Vibrationpp. 118-121.
Feng, Xiaobing National Univ. of Singapore
Wong, Yoke San National Univ. of Singapore
Hong, Geok Soon National Univ. of Singapore
Effect of Electropolishing on the Surface Topography ofMicro-Wire
Electrodischarge Machined Simulated Coil Gaps pp. 122-126.
Serna, Lysle Sandia National Lab.
Jared, Bradley Sandia National Lab.
Boyce, Brad Sandia National Lab.
Knorovsky, Jerry Sandia National Lab.
13:50-14:15 MoB3.3
Study on Depth Error in Fabrication of Micro Channels Via Micro-EDM Milling pp. 127-133.
Modica, Francesco Inst, of Industrial Technologyand Automation
Marrocco, Valeria
Fassi, Irene
Bellantone, Vincenzo
CNR-ITIA, Inst, of Industrial
Tech.
National Res. Council - Inst, of
Industrial Technology a
Inst, of Tech. and automation,National Res. Council
14:15-14:40 MoB3.4
Effect of Different Microstructure of Materials on Micro-EDM
pp. 134-138.
Yu, Zuyuan Dalian Univ. of Tech.
Guo, Meigang Dalian Univ. of Tech.
Li, Jianzhong Dalian Univ. of Tech.
Wang, Lianji Dalian Univ. of Tech.
Natsu, Wataru Tokyo Univ. of Agriculture andTech.
MoC1 202 Northwestern
Micro-Cutting: Applications (RegularSession).
15:20-15:45 MoC1.1
Effect of Different Working Fluids on Machining of Bovine Bone
Using Micro Rotary Ultrasonic Machining pp. 139-146.
Gu, Lin Shanghai Jiao Tong Univ.
Rajurkar, K.P Univ. of Nebraska-Lincoln
Patwardhan, Amey Univ. of Nebraska-Lincoln
15:45-16:10 MoC1.2
Microstructural Modeling of Machining ofTiBAHV pp. 147-151.
Lakhani, Harnlsh IIX Bombay
Joshi, Shashikant IIT Bombay
Tewari.Asim IIT Bombay
Joshi, Suhas Indian Inst, of Tech. Bombay
16:10-16:35 MoC1.3
Grinding of Sharp Tip in Thin NITi and Stainless Steel Wire forMedical Devices pp. 152-158.
Wang, Yancheng Univ. of Michigan
Spangler, Christopher Univ. of Michiganvan Loon, Mackenzkie Univ. of Michigan
Tai, Bruce L-J Univ. of Michigan
Xu, Kai Shanghai Jiao Tong Univ.
Shin, Albert Univ. of Michigan
xxii
-
16:35-17:00 MoC1.4 15:45-16:10 MoC3.2
Grinding of Lancet Needle Tip and Its Tissue Insertion Force
Analysis pp. 159-165.
Wang, Yancheng Univ. of Michigan
van Loon, Mackenzie Univ. of Michigan
Spangler, Christopher Univ. of Michigan
Tai, Bruce L-J Univ. of Michigan
Xu, Kai Shanghai Jiao Tong Univ.
Shin, Albert Univ. of Michigan
MoC2 203 Lake
Laser Processing (Regular Session)
15:20-15:45 MoC2.1
Femtosecond Pulse Filamentation Based Fabrication of In-Fiber
Bragg Grating in Single Mode Fiber and Its Performance
Analysis pp. 166-171.
Ahmed, Farid Univ. of Victoria, Mechanical
Engineering
Bouchard, Devan Univ. of Victoria
Wild, Peter Univ. of Victoria
Jun, Martin Byung-Guk Univ. of Victoria
15:45-16:10 MoC2.2
A Study of Laser Fine Cutting ofSlot Arrays Based on Vapour-MeltRatio Controlling pp. 172-176.
Wang, Xuyue Dalian Univ. of Tech.
16:10-16:35 MoC2.3
Eximer Laser Ablation of Micro-Lenses Using Gray-Scale Mask
Technique pp. 177-182.
Kulkarni, Anish IIT Bombay
Maria, Deepak IIT Bombay
Bhandarkar, Upendra IIT BombayBhandarkar
Joshi, Suhas Indian Inst, of Tech. Bombay
16:35-17:00 MoC2.4
Numerical Modeling ofLaser Sintering Process , pp. 183-186.
Joshi, Suhas Indian Inst, of Tech. Bombay
Electrical Discharge Machining for Small-Holes with Pulse ControlTechniques pp. 192-198.
Jiang, Yi Jiangnan Univ.
Zhao, Wansheng Shanghai Jiao Tong Univ.
Xi, Xuecheng Shanghai Jiao Tong Univ.
16:10-16:35 MoC3.3
Experimental Investigation of Micro-EDM Operation in FabricationofMicro-Holes pp. 199-203.
Maity, Kalipada National Inst, of Tech. Rourkela,Odisha
Vishwakarma, U. National Inst, of Tech. Rourkela,
Odisha
16:35-17:00 MoC3.4
Characterization of Micro-EDM Process for PyrolyticCarbon pp. 204-207.
Gupta, Neeraj Indian Inst, of Tech. Bombay
Bajpai, Vivek Indian Inst, of Tech. Bombay
Singh, Ramesh Indian Inst, of Tech. Bombay
MoC3 206 Arch
EDM 2 (Regular Session)
15:20-15:45 MoC3.1
An Experimental Study of Electrochemical Discharge Machiningwith Reversed Alignment pp. 187-191.
Wu, Jie Shanghai Jiao Tong Univ.
Zhu, Jingwen Shanghai Jiao Tong Univ.
Kang, Xiaoming Shanghai Jiao Tong Univ.
Zhao, Wansheng Shanghai Jiao Tong Univ.
-
Technical Program for Tuesday March 13, 2012
TuA1 202 Northwestern;
Micro-Cutting: Process Behavior (Regular Session)
08:25-08:50 TuA2.2
08:00-08:25 TuA1.1
Evaluation of Superficial and Dimensional Quality Features inMetallic Micro-Channels by Micro-Milling pp. 208-215.
Monroy, Karla Tecnologico de Monterrey
Attanasio, Aldo Univ. of Brescia
Ceretti, Elisabetta Univ. of Brescia
Siller, Hector R. Tecnologico de Monterrey
Hendrichs, Nicolas Tecnologico de Monterrey
Giardini, Claudio Univ. of Bergamo
08:25-08:50 TuA1.2
Effect of Machining Parameters on Burr Size of MicromilledFoils pp. 216-223.
Mathai, George Georgia Inst, of Tech.
Melkote, Shreyes Georgia Inst, of Tech.
Rosen, David Georgia Inst, of Tech.
08:50-09:15 TuA1.3
Burr Reduction Method in Microdrilling of Metal Sheets by PolyMethyl Methacrylate (PMMA) Coating pp. 224-229.
Giorleo, Luca Univ. of Brescia
Ceretti, Elisabetta Univ. of Brescia
Giardini, Claudio Univ. of Bergamo
09:15-09:40 TuA1.4
Wear Compensation Using Mechatronical Reamer .... pp. 230-232.
Kuhfuss, Bernd Univ. of Bremen, Faculty ofProduction Engineering-
Germany
Alters, Sebastian Univ. of Bremen, Bremen Inst.
for Mechanical Engineering
Wilhelmi, Philipp Univ. of Bremen
09:40-10:05 TuA1.5
Analysis of Tool Wear and Size Effect for Diamond Coated Tool inMicro Milling of Graphite pp. 233-238.
Liu, l-Chen National Chung Hsing Univ.
Lu, Ming-Chyuan National Chung Hsing Univ.
TuA2 7.:;';:; 203 Lake
Forming Processes 1 (Regular Session)
08:00-08:25 TUA2.1
Micro Hole Piercing for Ultra Fine Grained Steel pp. 239-242.
Komatsu, Takafumi Komatsuseiki Kosakusho Co.,Ltd.
Kobayashi, Hitoshi Komatsuseiki Kosakusho Co.,Ltd.
Torizuka, Shiro National Inst, for Material
Science
Nagayama, Shin-ichi Tokushu Kinzoku Excel Co., Ltd
Effects of Dry Machining on Process Limits in Micro RotarySwaging pp. 243-247.
Kuhfuss, Bernd Univ. of Bremen, Faculty ofProduction Engineering-
Germany
Moumi, Eric Univ. of Bremen, Faculty ofProduction Engineering
Piwek, Volker Univ. of Bremen, Faculty ofProduction Engineering-
Germany
08:50-09:15 TuA2.3
High-Velocity Coining of Microstructures in High-GradeSteel pp. 248-253.
Koenig, Christoph Tech. Univ. Berlin
Mahr, Frederik Tech. Univ. Berlin
09:15-09:40 TUA2.4
Measurement of Strain Gradients and Forces During Electrically-Assisted Microbending pp. 254-258.
Kinsey, Brad Univ. of New Hampshire
Jordan, Adam Univ. of New Hampshire
09:40-10:05 TuA2.5
Micro Surface-Texturing by Electrically-Assisted Micro-Rolling(EAuR) pp. 259-266.
Ng, Man Kwan Northwestern Univ.
Cao, Jian Northwestern Univ.
Fan, Rong Northwestern Univ.
TuA3 206 Arch
Polymer Nanofabrication (Regular Session)
08:00-08:25 TuA3.1
Injection Molded CNT Nanocomposite Based Strain SensorNetwork pp. 267-274.
Parmar, Kaushik Univ. of Calgary
Mahmoodi, Mehdi Univ. of Calgary
Graham, Eldon Univ. of Calgary
Park, Simon Univ. of Calgary
08:25-08:50 TuA3.2
High-Rate Nanomanufacturing by Combining Nanomilling andElastomer Molding Processes pp. 275-278.
Gozen, Bulent Arda Carnegie Mellon Univ.
Ozdoganlar, Burak Carnegie Mellon Univ.
08:50-09:15 TuA3.3
Injection Molding of Nanostructures for Structural Colors
pp. 279-281.
Yoo, Yeong-Eun KIMM
Choi, Doo-Sun KIMM
Seo, Jae-Won SNUT
Kim, Sun-Kyoung SNUT
xxiv
-
09:15-09:40 TuA3.4
Controlled Micropatterning of Continuous Conducting Nanofiber
Arrays Using Low-Voltage Near-Field Electrospinning pp. 282-285.
Bisht, Gobind Singh Univ. of California Irvine
Kulinsky, Lawrence Univ. of California Irvine
Madou, Marc Univ. of California Irvine
Nesterenko, Sergiy Univ. of California Berkeley
Canton, Giulia Univ. of California Irvine
Liu, Han Zhen Univ. of California Irvine
09:40-10:05 TuA3.5
Electrospinning of Nonaligned and Aligned PolycaprolactoneFibers forBone Tissue Engineering pp. 286-290.
Ko, Junghyuk Univ. of Victoria
Mohtaram, Nima Univ. of Victoria, Mechanical
Engineering
Willerth, Stephanie Univ. of Victoria, Mechanical
Engineering
Jun, Martin Byung-Guk Univ. of Victoria
TuB1 202 Northwestern
Surface Preparation (Regular Session)
10:30-10:55 TuB1.1
Effects of Laser Pulse Duration on Pulse Laser Micro
Polishing pp. 291-297.
Vadali, Madhu Univ. of Wisconsin-Madison
Ma, Chao Univ. of Wisconsin-Madison
Duffie, Neil Univ. of Wisconsin-Madison
Li, Xiaochun Univ. of Wisconsin-Madison
Pfefferkorn, Frank E. Univ. of Wisconsin-Madison
10:55-11:20 TuB1.2
Designing Surfaces by Laser Remelting pp. 298-305.
Temmler, Andre RWTH Aachen Univ.
Willenborg, Edgar Fraunhofer Inst, for Laser Tech.
Wissenbach, Konrad Fraunhofer Inst, for Laser Tech.
11:20-11:45 TuB1.3
Fabrication Technology of Superhydrophobic Surfaces Based onElectrochemical Machining Method pp. 306-313.
Xu, Wenji Dalian Univ. of Tech.
Song, Jinlong Dalian Univ. of Tech.
TuB2 203 Lake
Forming Processes 2 (Regular Session)
10:30-10:55 TuB2.1
Small Mechanical Press with Double-Axes Servo System for the
Forming of Micro Metal Products ,. pp. 314-317.
Chen, Pin-Jyun National Chiao Tung Univ.
Wu, Wen-Chieh Metal Inducstries Res. and
Development Center
Tu, Kuo-Yin Metal Industries Res. &Development Centre
Lin, Yuting Metal Industries Res. &
Development Centre
10:55-11:20 TuB2.2
Kinematics and Dynamic Balancing Analysis for Design of MicroPress pp. 318-322.
Lin, Yuting Metal Industries Res. &
Development Centre
Wang, Hsin-Te Metal Industries Res. &
Development Centre
Cheng, TsungJen Metal Industries Res. &
Development Centre
Lin, IChen Metal Industries Res. &
Development Centre
Chen, Pin-Jyun National Chiao Tung Univ.
Lin, Chih-Hao Metal Industries Res. &
Development Centre
11:20-11:45 TuB2.3
Microheading Process: Deformation and Realization... pp. 323-328.
Fu, Ming Wang The Hong Kong Pol. Univ.
Chan, Wai Lun The Hong Kong Pol. Univ.
TuB3 ''"B'&^M^M^: 206 ArchPolymer Molding 1 (Regular Session)
10:30-10:55 TuB3.1
Liga-Mold Inserts for Industrial Use pp. 329-331.
Heneka, Jochen Karlsruhe Inst, of Tech. (KIT)
10:55-11:20 TuB3.2
Characterization of Rheological Behaviour and Numerical Results
Concerning Mixing Process in Brabender® Twin-Screw Mixer of
Polymers and Loaded Polymers pp. 332-338.
Barriere, Thierry FEMTO-ST
Gelin, Jean-Claude FEMTO-ST Inst. Univ. ofFranche-Comte
11:20-11:45 TuB3.3
Influence of Pre-Sintering Temperature and Time on the Bendingpp. 339-344.
Li, Jianzhong Dalian Univ. of Tech.
Zhang, Long Dalian Univ. of Tech.
Yu, Zuyuan Dalian Univ. of Tech.
Lu, Yongfeng Univ. of Nebraska-Lincoln
Chen, Guoqing Dalian Univ. of Tech.
tuci . 202 Northwestern
Mlcromachlnes: Design (Regular Session)
14:15-14:40 TuC1.1
Design of a Compact Fluidic XY-Stage for Precise Positioningpp. 345-349.
Denkena, Berend Leibniz Univ. Hannover
Mohring, Hans-Christian Leibniz Univ. Hannover
Kayapinar, Haydar Leibniz Univ. Hannover
XXV
-
14:40-15:05 TuC1.2 14:40-15:05 TuC3.2
NAPS: Robotic Platform for Nanosystems Integration
pp. 350-353.
Univ. of Texas at ArlingtonMurthy, Rakesh
Das, Aditya Univ. of Texas atArlington
15:05-15:30 TuC1.3
Transfer Printing with Microfabricated Instrumented
Stamps pp. 354-359.
Ahmed, Numair Univ. of Illinois at Urbana
Champaign
Ferreira, Placid M. Univ. of Illinois at Urbana
Champaign
TuC2 203 Lake
Friction in Forming (Regular Session)
14:15-14:40 TuC2.1
Micro-Patterning Onto DLC Coating by Plasma Oxygen Etching ...pp. 360-366.
Aizawa, Tatsuhiko Shibaura Inst, of Tech.
Yunata, Edo Univ. of Brawijaya
Redationo, Tugur Univ. of Brawijaya
Fukuda, Tatsuya Mitue Mold Engineering, Col.,Ltd.
14:40-15:05 TuC2.2
Characterization of the Effects of High-Frequency Vibration onAluminum and Copper Upsetting ,, pp. 367-372.
Witthauer, Adam Iowa State Univ.
Yao, Zhehe Zhejiang Univ.
Kim, Gap-Yong Iowa State Univ.
15:05-15:30 TuC2.3
pp. 373-377.
Ghassemali, Ehsan NanyangTechnological Univ.
(SIMTech)
Tan, Minj-Jen School of Mechanical &
Aerospace Engineering,Nanyang Tech.
C.V. Lim, Samuel Singapore Inst, ofManufacturing Tech.
E.W. Jarfors, Anders Jonkoping Univ.
TuC3 206 Arch
Polymer Molding 2 (Regular Session)
14:15-14:40 TuC3.1
A Disposable Lab-On-A-Disk with MicroJMacro StructuresFabricated by Injection Molding and Polymer ThermalBonding pp. 378-381.
La, Moonwoo POSTECH
POSTECHKim, Dong Sung
Micro-Injection Molding of Polymer Substrates with Pillars andWells Using Conventional Mold Base and Heating pp. 382-388.
Rodgers, John Lehigh Univ.
Bekisli, Burak Lehigh Univ.
Coulter, John Lehigh Univ.
15:05-15:30 TuC3.3
Demoulding Force in Micro-Injection Moulding pp. 389-393.
Griffiths, Christian Andrew Cardiff Univ.
Dimov, Stefan Univ. of Birmingham
TuC4 207 Rock
Metrology (Regular Session)
14:15-14:40 TuC4.1
An Artificial Compound-Eye ImagingObjects In 2J4D Space
Si, Di
Tang, Guanrong
Du, Ruxu
System for Measuring Moving
pp. 394-400.
Shenzhen Inst, of Advanced
Tech.
Guanzhou Inst, ofAdvanced
Tech. Chinese Acad. Sci
The Chinese Univ. of HongKong
14:40-15:05 TuC4.2
Machine Integrated Measurement
Specular Surfaces
Kurz, Martin
of Ultra Precision Machined
pp. 401-405.
TU Berlin
15:05-15:30 TuC4.3
Experimental Study of Microscale Probe Measurement SystemUsing Wire-Based Probe and Acoustic Emission Sensor
pp. 406-410.
Elfurjani, Salah Univ. of Victoria, Mechanical
Engineering
Bayesteh, Abdolreza Univ. of Victoria, Mechanical
Engineering
Jun, Martin Byung-Guk Univ. of Victoria
TuD1 202 Northwestern
Micro-Cutting: Tooling (Regular Session)
15:50-16:15 TuD1.1
Experimental Study of the Effect of Tool Orientation on CuttingForces in Five-Axis Micro-Milling of Brass pp. 411-416.
Barakchi Fard, M. Javad The Univ. of Western Ontario
Bordatchev, Evgueni National Res. Council ofCanada
Tauhiduzzaman, Mohammed National Res. Council of
Canada
16:15-16:40 TuD1.2
Micro Cutting Tool Measurement by Focus-Variation pp. 417-423.
Scherer, Stefan Alicona Imaging GmbH
Danzl, Reinhard Alicona Imaging GmbH
Helmli, Franz Alicona Imaging GmbH
xxvi
-
16:40-17:05 TuD1.3
Development of a Meso-Scale CBN Flexible Cutting Tool for Micro-Groove Machining of Stainless Steel pp. 424-431.
Raghavendra, Hari Univ. of Illinois at Urbana
Champaign
Bourne, Keith FOXXCON
DeVor, Richard E. Univ. of Illinois - Urbana
Champaign
Kapoor, Shiv G. Univ. of Illinois - Urbana
Champaign
17:05-17:30 TuD1.4
Influence of Different Tool Corner Radius on MillingTi6AI4V pp. 432-436.
Tian, Rukun Shandong Univ.
TuD2
Size Effect in Forming (Regular Session)
203 Lake
15:50-16:15 TuD2.1
Influence of Grain Size on Micro-Extrusion Tribology ofBrass pp. 437-441.
Ngaile, Gracious North Carolina State Univ.
16:15-16:40 TuD2.2
Experimental Study of the Size Effects in the Upsetting of MetallicMaterials pp. 442-446.
Shen, Hui Zhejiang Univ.
Mei, Deqing Zhejiang Univ.
Yao, Zhehe Zhejiang Univ.
Chen, Ziehen Zhejiang Univ.
16:40-17:05 TuD2.3
Experimental Study on Size Effects in Micro Semisolid Forming ofAluminum Alloy pp. 447-451.
Tang, Pei Zhejiang Univ.
Mei, Deqing Zhejiang Univ.
Yao, Zhehe Zhejiang Univ.
Chen, Ziehen Zhejiang Univ.
17:05-17:30 TuD2.4
Constitutive Model for Thin Sheets with One or Several Grains
across Thickness in Micro-Forming pp. 452-457.
Wang, Qian Shanghai Jiao Tong Univ.
Dong, Xianghuai Shanghai Jiao Tong Univ.
16:15-16:40 TuD3.2
Facing Challenges in Micro-Powder-Injection-Molding: ImprovingDimensionalAccuracy by Tool Design pp. 462-464.
Mueller, Tobias Karlsruhe Inst, of Tech.
Piotter, Volker Karlsruhe Inst, of Tech.
Plewa, Klaus Karlsruhe Inst, of Tech.
16:40-17:05 TuD3.3
Effect of Moulding Parameters on the Local Particle Density andParticle Size Distribution in Micro Metal Parts pp. 465-468.
Weber, Oxana Karlsruhe Inst, ofTech.
Rack, Alexander European SynchrotronRadiation Facility
Schulz, Michael Karlsruhe Inst, ofTech.
17:05-17:30 TuD3.4
Micromanufacturing Using Eco-Friendly Metal Powder InjectionMoulding pp. 469-472.
Weber, Oxana Karlsruhe Inst, of Tech.
Hanemann, Thomas Karlsruhe Inst, of Tech.
TuD3 206 Arch
Metal Injection Molding (Regular Session)
15:50-16:15 TuD3.1
Electrohydrodynamic Printing of Metal OxideMicrostructures pp. 458-461.
Sidhu, Raminderdeep Univ. of Texas atArlington
Sin, Jeongsik Univ. of Texas at Arlington
Lee, Woo Ho Univ. of Texas atArlington
Stephanou, Harry Univ. of Texas at Arlington
Wijesundara, Muthu Univ. of Texas at Arlington
xxvii
-
Technical Program for Wednesday March 14, 2012
WeA1^
Micro-Cutting Modeling (Regular Session)
202 Northwestern
09:30-09:55 WeA1.1
Numerical Simulation of Micro Milling Process with Sine-Wave EdgeShapes pp. 473-477.
Ono, Takenori Tsuyama national Coll. ofTech.
09:55-10:20 WeA1.2
Finite Element Modeling of Orthogonal Micromachining of
Anisotropic Pyrolytic Carbon Via Damaged Plasticity ... pp. 478-484.
Bajpai, Vivek Indian Inst, of Tech. Bombay
Singh, Ramesh Indian Inst, of Tech. Bombay
10:20-10:45 WeA1.3
Simulation-Based Study of the Micro-Endmilling Process
pp. 485-492.
Elkaseer, Ahmed Cardiff Univ.
Dimov, Stefan Univ. of Birmingham
Minev, Roussi Cardiff Univ.
Scholz, Steffen Cardiff Univ.
10:45-11:10 WeA1.4
Ductile Mode Material Removal Model of Micro Rotary Ultrasonic
Machining pp. 493-498.
Gu, Lin Shanghai Jiao Tong Univ.
Gao, Fei Shanghai Jiao Tong Univ.
Zhao, Wansheng Shanghai Jiao Tong Univ.
Rajurkar, K.P Univ. of Nebraska-Lincoln
Yu, Zuyuan Dalian Univ. ofTech.
11:10-11:35 WeA1.5
Prediction of Cutting Conditions Effects on Micro MillingPerformance pp. 499-506.
Zdebski, Daniel Univ. of Nottingham
Ratchev, Svetan Univ. of Nottingham
Stephenson, David Cranfield Univ.
Allen, David Cranfield Univ.
11:35-12:00 WeA1.6
A Surface Generation Model for the Elliptical Vibration Texturing
09:55-10:20 WeA2.2
Micro-Manufacturing of 3-D Porous Surfaces - Investigations on
Porosity and Hardness pp. 520-525.
Cora, Omer Necati Karadeniz Tech. Univ.
Koc, Muammer NSF l/UCR Center for Precision
Forming (CPF) USA
10:20-10:45 WeA2.3
Mixing and Characterisation of Copper Feedstock for Hot
Embossing Process and Itsapplication to Metallic Mould
Replication PP- 526-533.
Gelin, Jean-Claude FEMTO-ST Inst. Univ. of
Franche-Comte
10:45-11:10 WeA2.4
Hot-Embossing ofPolymeric Micro-Tubes pp. 534-541.
Zhao, Jie Univ. of Strathclyde
Qin, Yi Univ. ofStrathclyde
Razali, Akhtar Univ. of Strathclyde
Yip, Arthur L K Univ. of Strathclyde
Fei, Zhicong Univ. of Strathclyde
11:10-11:35 WeA2.5
Enhanced Performance of a Hybrid Process for ManufacturingSurgical-Grade Knife Blade Cutting Edges from Bulk Metallic Glass
pp. 542-549.
Krejcie, Alex J Univ. of Illinois - Urbana
Champaign
Kapoor, Shiv G. Univ. of Illinois - Urbana
Champaign
DeVor, Richard E. Univ. of Illinois - Urbana
Champaign
11:35-12:00 WeA2.6
Experimental Study of Electrical-Assisted Micro/Meso EmbossingProcess pp. 550-556.
Peng, Linfa Shanghai Jiao Tong Univ.
Mai, Jianming Shanghai Jiao Tong Univ.
Lai, Xinmin Shanghai Jiao Tong Univ.
Guo, Ping Northwestern Univ.WeA3 206 Arch
Ehmann, Kornel Northwestern Univ. Assembly (Regular Session)
09:30-09:55 WeA3.1
WeA2'
203 Lake
Embossing (Regular Session)
09:30-09:55 WeA2.1
Constitutive Model and Processing Map ofBulk Amorphous Alloy in
pp. 516-519.
Zhang, Shi-Hong Inst, of Metal Res. Chinese
Acad, of Sciences
Cheng, Ming Inst, of Metal Res, Chinese
Acad, of Sciences
Wang, Rui-Xue Inst, of Metal Res. ChineseAcad, of Sciences
Modeling and Design Optimization of Dye-Sensitized Solar Cells....
pp. 557-564.
Parmar, Kaushik Univ. of Calgary
Kianimanesh, Amir Univ. of Calgary
Freiheit, Theodor Univ. of Calgary
Park, Simon Univ. of Calgary
09:55-10:20 WeA3.2
A New Approach for Handling ofMicro Parts in Bulk Metal Forming
pp. 565-570.
Mahshid, Rasoul Denmark Tech. Univ.
Hansen, Hans Noergaard Tech. Univ. of Denmark
Arentoft, Mogens ipu
xxviii
-
10:20-10:45 WeA3.3
Automated Nanohandling and Nanofabrication by a CombinedRoboticAFM/SEM/FIB System pp. 571-576.
Fatikow, Sergej Univ. of Oldenburg
Bartenwerfer, Malte Tech. ClusterAutomatedNanohandling, Inst, for Inform.
Eichhorn, Volkmar Div. Microrobotics and Control
Engineering, Univ. of Oldenburg
Zimmermann, S6ren Tech. ClusterAutomated
Nanohandling, Inst, for Inform.
Krohs, Florian Inst, for Information Tech.
QFFIS
10:45-11:10 WeA3.4
Development of a Modular and Compliant Micro-AssemblyPlatform with Integrated Force and Compliance MeasurementCapabilities pp. 577-581.
Moore, Paul Univ. of Florida
Rakotondrabe, Micky FEMTO-ST Inst. ENSMM
Clevy, Cedric FEMTO-ST Inst. ENSMM
Wiens, Gloria Univ. of Florida
11:10-11:35 WeA3.5
Quantification of Thermal Resistance of Transient-Liquid-PhaseBonded Interfaces for Assembly of Cu-Based MicroChannel HeatExchangers pp. 582-586.
Lu, Bin Louisiana State Univ.
Chen, Ke Louisiana State Univ.
Meng, Wen Jin Louisiana State Univ.
Mei, Fanghua Enervana Tech. LLC
Karki, Amar Louisiana State Univ.
Jin, Rongyin Louisiana State Univ.
11-.35-12:00 WeA3.6
Influence of Micro Surface Texturing on Adhesion Strength
pp. 587-593.
Xu, Dongkai Northwestern Univ.
Ng, Man Kwan Northwestern Univ.
Cao, Jian Northwestern Univ.
Fan, Rong Northwestern Univ.