Proaim 22ft Jib Camera Crane HDMotorized Pan & Tilt Head for Cameras up to 30 lbs Rentals: 714-785-2454 / Operator: Dan Ackerman

RATES:Transportation Fee: $300 Includes transportation and initial setup of the jib. Rate includes Los Angeles & North Orange County areas.

Rate: $40/hourStarts at the jib operator's call time & ends with final breakdown of jib. The rate is not subject to overtime rates, but remains $40/hr past 10 hours.

Operator Fee: Negotiated with Operator

Optional: Bartech One Motor Remote Follow Focus: $150/day

Rental Agreement signature required.

Production Insurance made out to Dan Ackerman is required.

P. 1

JIB Features

Proaim 22ft Long Jib Crane with accessories:• Camera Platform• Rear control section includes Joystick Control box, LCD Monitor & your Zoom

Controller• Stress cable• Proaim Carrying Case for Jib Arm & Stand• Proaim Custom-fit Suitcase for Accessories• Instruction Manual• 300 lbs of Plate Weight

Jib Crane• 22ft Crane is expandable from 4ft (one section) to 22ft (seven section) in 3ft

increments.• Each extendable section is 4ft long giving 1ft overlap between sections• Since each section slides out, pulled from the previous sections, you may store unused sections in

the tail as ballast weight. This lightens your counterweight demand.• Easy to Set-up

Proaim HD Floor Dolly• HD Floor Dolly is a 4 Wheeled Heavy Duty Dolly, can bear the total weight

of 1323 lbs• Steering Rod for Changing the Dolly Wheel Direction• Locking system in all four wheels available• Collapsable• Easy to Transport

Motorized Pan & Tilt Head for cameras up to 30lbs• Provides a full 360+ degree, smooth pans and tilts for your camera. • The proportional joystick fitted controller mounts to the jib arm and has

overall speed and null zone control knobs as well as directional preference switches.

• The MotorHead HD unit carries cameras up to 30 lbs. with extra clearance for matte boxes and long lenses Mounting is via (1) 3/8” knob bolt.

• This unit mounts in either undersling or oversling mode. • Complete system includes pan & tilt head, 2 motors, 20' cable, controller &

power supply.

Focus & Zoom Control Kit• Monitor Specs: HDMI or RCA Jack Only• 25 Ft. HDMI Cable• JonyJib Power Distribution Box: This passive box mounts near the rear of

your jib, receives 12 volts from a 12 VDC power supply via 4 pin XLR female and provides (3) XLR-4 pin power taps and (1) coaxial 2.1mm power taps.

• Remote Control with Mounting Clamp• Zoom Bracket• Focus Bracket• 32ft long Drive Cable with connectors

P. 2

JIB Specifics

P. 3

P. 4

22ft Crane can also be used in the following lengths

P. 5