PATENT NO.: U.S. 8,246,496; 8,579,737; CHINA 101678299; EU EP2146786 B1. ADDITIONAL U.S. AND WORLDWIDE PATENTS PENDING

IDEA SUBMISSIONIf you have an idea for a new and innovative sport training product, visit sklz.com to submit your concept. Some restrictions may apply.

1-YEAR LIMITED WARRANTY This warranty does not cover damages resulting from accident, misuse, abuse or lost merchandise and is only valid in the USA. Need proof of purchase for warranty coverage. Questions? Email customerservice@sklz.com or call toll free 1-877-225-7275.

Made in China. ©2016 Pro Performance Sports, LLC. All rights reserved. Manufactured and distributed by SKLZ/Pro Performance Sports: 2081 Faraday Avenue, Carlsbad, CA 92008 USA. SKLZ is a registered trademark of Pro Performance Sports, LLC, its subsidiaries and affiliates. Product features, appearance and specifications may be subject to change without notice. Unauthorized duplication is a violation of applicable local and international laws.

V1

PRO TRAINING FUTSAL GOAL GETTING STARTED3M x 2M

Thank you for choosing the SKLZ Pro Training Futsal Goal. We are dedicated to providing you with the best tools and instruction possible to help you prepare for your sport. If there is anything else we can do to help, don’t hesitate to send us an email at customerservice@sklz.com or give us a call at 1-877-225-7275.

BEFORE YOU BEGIN:• Read all instructions carefully before using. If the instructions are not followed correctly, it could result in injury or damage to the product.• Always check for wear and tear before use. If any is found, do not use the product.• If you are missing any Pro Training Futsal Goal components, please contact SKLZ customer service toll free at 1-877-225-7275.

iWARNING:PHYSICIANS WARNING: Not all exercise equipment and programs are suitable for everyone. It is recommended that you consult your physician before using this equipment or beginning this or any other exercise program.

• Recommended for athletes over 14 years old. Athletes under the age of 18 should use the Pro Training Futsal Goal under strict adult supervision.• Pro Training Futsal Goal is under tension when set up. Please take the utmost care when releasing the tension during disassembly. Failure to do so may result in injury.• Adult assembly required.• Do not climb or hang on the Pro Training Futsal Goal.• When in use, make sure the Pro Training Futsal Goal is set up in a clear area to avoid injury and/or damage to property. • To avoid pinching, use caution when connecting the push-button tubing.

iCAUTION:• Keep away from fire and heat sources.

CARE:• Avoid storing the Pro Training Futsal Goal in extremely hot or cold environments as this could reduce the life span of the product.• When done, disassemble Pro Training Futsal Goal and store after use. Do not leave Pro Training Futsal Goal outdoors.

VISIT SKLZ.COM TO LEARN MORE

1. Carefully remove goal from storage bag (A), and unroll net from base frame (B). Net is permanently attached to the frame for easy setup.

3. Roll frame so it lays with rubber feet facing down. Unlock and unfold front arms away from you until they lock into place. Release and extend left and right telescoping sections at back to bring base frame to full width.

5. Attach net to tops of support poles by inserting the pins at the top of the pole into the clips attached to the net. Connect the front of the net to the taller section of the Dual Tension-Tite™ support poles first, then the back second. Follow the same order on the opposite side. You may need to lean the goal forward in order to reach top corners. Be careful not to let go until the pin is fully inserted to avoid injury. Connect the bottom of the posts to the frame by hooking the bottom loop to the front of the post. Use ground stakes (D) to secure the assembled goal in place for use.

2. Unfold two side legs of the base frame by swinging them left and right from center hinge until they lock into place.

4. Assemble the Dual Tension-Tite™ support poles (C) and insert into each of the rear corner joints of the base frame and lock into place. Poles will fit in either side. The segments of these support poles are permanently connected using elastic cords to simplify assembly.

6. Disassemble your goal by reversing the above procedure. Begin by detaching the net from the support poles by pulling the pins from the corners. Disassemble the support poles, and fold connected segments together. Use the silver release buttons to fold front arms back and to slide telescoping sections together. Fold base frame at center hinge and roll net around frame. Carefully place into storage bag.

GETTING STARTED

IN THE BOX

STORAGE BAGA BASE FRAME WITHATTACHED NET

BB DUAL TENSION-TITE™ SUPPORT POLES (2)

BC GROUND STAKES (4)D