180413

All power in your handsUniversal Dual Sided Remote with Keyboard and Air Mouse

PRO REMOTE

User Manual

TABLE OF CONTENTS

1. Overview

2. Cautions

3. Layout and Key Funtions

4. Pairing

5. Sleep

6. Air mouse

7. Charge

8. Learning

9. Specifications

10. Other

QWERTY Air mouse

3.5mm Audio Jack USB rechargeable

Two sides to rule them all. Take advantage of the innovative dual side design behind WeTek Pro Remote. With a sleek back-to-back full QWERTY keyboard and complete universal remote controller, you’ll be able to get fast access and focus on what’s important: the content.

PRO REMOTE

PRO REMOTE

II. Cautions• After replacement of the battery, pair the remote in accordance with user

manual.• If the unit does not operate after replacement of the battery, take the

battery out for 1 minute and reattempt pairing in accordance with the user manual.

• If the remote controller is not being used for prolonged period of time, it is recommendable to remove the battery from the unit.

• Do not dismantle or exert heat to the battery.• Do not drop battery or exert extreme impact that may even cause the

case to be damaged.• Do not immerse the battery in water.• There is the danger of explosion if the battery is inserted reversely.• Discard the used battery into a designated location.• Do not use this device near water.• Clean only with a dry cloth.• Do not use it near any heat sources such as radiators, heat registers,

stoves or other apparatus (including amplifiers) that produce heat.• Only use accessories included in this package or recommended by the

manufacturer.• Do not attempt to disassemble the unit. Do not put any foreign object in

this unit.• Keep the unit away from flower vases, tubs, sinks, etc. If liquids are

spilled into the unit, serious damage could occur.

PRO REMOTE

III. Layout and Key FunctionsLED Mode info (Blue - WeTek, Green-TV)LED Battery Charge IndicatorPower buttonFunction KeysMenuMute / Unmute Directional KeysShareInfoHomeVolume up/downOn/Off mouseNumeric PadLEARN MicrophonePlayback controlsRecent apps SubtitlesTeletextSelectRecording StorageBackChannel next / previousMouse ClickSwitch WeTek / TV mode USB Port3.5mm headphone jackOn/Off RCUQWERTY Keyboard side

VOL +

VOL -

CH +

CH -

1 2

4 5 6

7 8

0

9

3

ON/OFF

OK

. .. ... ....

13

14

15

16

17

18

19

20

21

22

23

2

3

4

5

1

A B

Alt

PgDn

PgUp

Delete

27

OFF

ON

24

25

26

6

7

8

9

11

10

12

2

3

4

5

1

6

7

8

9

11

10

12

13

14

15

16

17

18

19

20

21

22

27

24

25

26

23

A

B

PRO REMOTE

IV. PairingPlease press and hold “Caps” button for 5 seconds. The LED will flash and the remote will pair to USB Dongle. Once pairing is successful, the LED will turn off. If remote fails to pair with the device, the remote will go to sleep after 60 seconds.

Alt Delete

Fn

CapsCtrl

Tab

Esc

V. SleepThe Pro Remote will go to sleep if without operation within 10 seconds. Simply press any key to wake up.

VI. Air mouse• Turn on/off the air mouse functionality using the button on Pro Re-

mote.• The LED on the side of your remote is on whenever the air mouse

functionality is on.• The air mouse will go to sleep after 10 seconds of inactivity. Simply

press to resume the function.• Place the Pro Remote on a surface such as a desk for 3 seconds for it

to re-center.

VII. ChargeThe Pro Remote will go to sleep if without operation within 10 seconds. Simply press any key to wake up. The Pro Remote will demonstrate low battery by flashing the side LED once every 5 seconds. Please recharge the remote at this point.

To recharge the battery:1. Connect USB port on side of remote to a USB cable to charge2. The LED on the side of the remote will turn while the remote is

charging.

The LED will turn off once the charge is completed.

VIII. Learning1. Set your remote to TV function. The TV mode is indicated by the Green

LED on top of the remote.

2. Place WeTek Pro Remote and the origin remote with both IRs facing.

3. Long press the LEARN button until Green led stay on

4. Press the button on WeTek Pro Remote you wish to assign a new

function. The LED starts blinking.

5. Press the button on the origin remote that you wish to teach and the

LED will flash in a short burst.

6. Repeat step 3 and 4 until all keys are assigned

7. Press STB/TV button again to stop assigning new keys and start using

the remote.

PRO REMOTE

IX. Specifications

Item Description

Model Pro Remote

Dimension 173×48×16 (mm)

Battery Lithium battery (included)

Nominal Voltage 3.7V

Typical Capacity 80 mAh, 2.14 Wh

Fly mouse function 3 axis G-sensor

USB rechargeable 1 meter USB cable for charger

Code Protocol IR / RF 2.4 G

Frequency Band 2.403GHz - 2.480GHz

Bandwidth 1M

Transmit power 5dB

Modulation GFSK

X. OtherFederal Communications Commission (FCC) Statement• You are cautioned that changes or modifications not expressly ap-

proved by the party responsible for compliance could void the user’s authority to operate the equipment.

• This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules.

• These limits are designed to provide reasonable protection against harmful interference in a residential installation.

• This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

• However, there is no guarantee that interference will not occur in a particular installation.

• If this equipment does cause harmful interference to radio or televi-sion reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

. Reorient or relocate the receiving antenna.

. Increase the separation between the equipment and receiver.

. Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected

. Consult the dealer or an experienced radio/TV technician for

help.

• This device complies with Part 15 of the FCC Rules.• An operation is subject to the following two conditions:

1) this device may not cause harmful interference, and

PRO REMOTE

2) this device must accept any interference received, including interfer-

ence that may cause undesired operation of the device.• Indoor use only

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equip-ment.

FCC RF Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF.

XI. WARRANTYFind all Warranty & Return Terms regarding Pro Remote accessing wetek.com/terms.

XII. FURTHER ASSISTANCEThis manual does not end here. To help you further improve your user experience, visit wetek.com/support.

If you find any problem, please give us the opportunity to address it before returning this product. Most technical support questions can be answered through our knowledge base or online support service.