print 2004 catalog-43 - rock valley antique auto parts

MasterCard

Page 37

®

5800 NORTH ROTHWELL RD. • BOX 352 • STILLMAN VALLEY, IL 61084 • 1-815-645-2271 • 1-800-344-1934 • FAX: 1-815-645-2740

INDEXAccess Doors ....................................................................................... 46

• Gas Tank• Master Cylinder• T.P.I. Pump• 11 X 15 Door

Braces• Fender Support .......................................................................... 41

Bug Screens ..........................................................................................47Bumpers

• Chevrolet Chrome ................................................................ 30-31• Chevrolet Stainless .............................................................. 32-33• Ford Chrome ........................................................................ 27-28• Ford Stainless ...................................................................... 28-29

Bumper Brackets• Chevrolet ...............................................................................36-37• Ford ...................................................................................... 34-35

Bumper Bolts ....................................................................................... 39Bumper Guards .................................................................................... 39Bumper Spreader Bar .......................................................................... 44

Dash Boards ........................................................................................ 40Door Hinge Pins ................................................................................... 40

Fender Bolts ......................................................................................... 41Fuel Line Hose.......................................................................................26Fuel Pumps .......................................................................................... 20Fuel Pickup Tubes .................................................................................24

Gas Caps ............................................................................................. 26Gas Tank Necks ............................................................................. 21-22

• Connector Hose ......................................................................... 24Gas Tanks ..........................................................................................1-15

• General Information ..................................................................... 1• Making a Fuel Tank Decision ...................................................... 2• How to Order a Custom Fuel Tank ............................................ 19• Chevrolet Gas Tank ............................................................... 9-13• Ford Gas-Tank ......................................................................... 3-6• Lincoln Gas Tank ......................................................................... 8• Mercury Gas Tank .................................................................... 7-8• Dodge & Plymouth Gas Tanks ............................................. 14-15• Tune Port Tank Drawing ............................................................ 16• Tune Port Information ................................................................ 17• Tune Port Kits ............................................................................ 18

Gas Tank Fittings...................................................................................25Gas Tank Mount Bolt & Spring Kits .......................................................26Gas Tank Vents

• Ball Check Assembly ................................................................. 24• Ball Check Fitting ....................................................................... 24

Gas Tank Senders• Gas Tank Sender Plate ...............................................................26• Sending Units ............................................................................ 26• Gasket ....................................................................................... 26

Grille• Mercury Lower ........................................................................... 45

Hood Hinge Rods ................................................................................. 44

Radiator Support Rods ........................................................................ 44Reflectors

• Tail Lamp ................................................................................... 42Running Boards

• Chevrolet Pick-up ...................................................................... 43• Ford Pick-up ............................................................................... 43

Spring Poly ........................................................................................... 43

POLICIESLIABILITY/GUARANTEE

Rock Valley Antique Auto Parts, Inc. will not be liable for personal or property damage caused by use or misuse of any product we sell or manufacture.The user shall assume all responsibility and risk connected herewith. Rock Valley Antique Auto Parts, Inc., reserves the right to make changes indesign or to make additions to or improvements upon, any products at anytime without incurring any obligation whatsoever to install the same orimprove upon products previously manufactured. We guarantee that parts will be free of defects in material and workmanship. We will refund the pur-chase price shown on your original invoice or replace any part found to be defective in workmanship and/or materials up to 30 days after the ship date.

ORDERINGPHONE, FAX, or MAIL: We offer a Toll Free line for orders only 800-344-1934 & 877-990-3673, FAX orders 815-645-2740. MAIL fill order blank out completely, include a daytime phone number.

QUESTIONS - Tech InformationPhone 815-645-2271 or 815-645-2101, 9:00 a.m. - 5:00 p.m. Monday through Friday. We will be glad to answer any question you have.

PAYMENTCREDIT CARDS - We accept Visa, MasterCard, Discover, or American Express. When paying by credit card, provide the card number, expirationdate, and the card holders name and address. C.O.D. SHIPMENTS are welcome. The C.O.D. fee is $7.50, all C.O.D.’s will be sent certified check only.PERSONAL CHECKS will not be accepted.

SHIPPING – SHIPPING CHARGESAll orders will be sent by United Parcel Service, unless they are oversize or overweight. U.P.S. will take up to 70 lbs. and 130" combined size. Overweight or oversize shipments will be sent by truck, freight collect. Cost to ship small parts: Minimum Postage $2.00. Cost to ship bumpers averagesabout $20.00 per pair because of their size, you will be charged for your destination. Cost to ship gas tanks averages about $25.00 to $30.00. Cost toship truck running boards averages about $25.00 to $30.00.

DAMAGED SHIPMENTSUpon receipt of an obviously damaged package, you have the option of refusing delivery and the order will be returned to us, or you may receive theorder and make note of the visible damage in writing to the carrier. If upon inspection of the parts you find them damaged due to the carriers handling,you then have 48 hours to file a claim with the carrier. Do not return the damaged parts to us. Keep the package and the parts as close as possible tothe condition you received them in. Without the package the carrier will void your claim.

RETURNSAll electronic items sold as is and have no warrentee they will not be accepted for credit or refund. Other returns must be made within 30 days of origi-nal ship date. You may call for a return authorization number. No returns accepted without this number. All returns must be sent postage paid andinsured. We have a 15% restocking charge on returned items.

®


119-1052-SR 119-1060-SR 119-1095-SR

Rock Valley manufactured stainless steel gas tanks for 1928 to 1951 Ford, 1940-48 Lincoln, 1939-51Mercury, 1931-57 Chevrolet., 1953-67 Corvette, 1933-48 Plymouth-Dodge and many more. We alsodo custom tanks.

NOTE:

All part numbers ending with “SR” are for street rod application.

Our first tank, for the popular 1934 Ford, was judged "Best New Product of theYear" during the "National Street Rod Association's" national meet in 1981.

SPECIFY A "ROCK VALLEY" GAS TANK FOR THE FOLLOWING ADVANTAGES:

• All tanks are baffled

• Spill-proof caps available with some tanks

• Ball check vent furnished with tanks requiring non vented caps

• All tanks are pressure tested

• All tanks are set up for Stewart Warner, Sun, V.D.O., Auto Meter, and Classic sending units

• Special sending unit application – available upon request

• All tanks are supplied with stainless steel mounting straps, or brackets

• The 1932-1940 Ford tanks are available in a 20 gallon model that is about 3" deeper than astock tank; the 15 gallon shallow version is about the same depth as original equipment

419-1010-SR 419-1050-SR 419-1020-SR

GENERAL FUEL TANK INFORMATION

MasterCard

Page 1

MasterCard

Page 2

®


HOW TO MAKE A FUEL TANK DECISIONShould I try to save my old tank?

• If you are restoring your vehicle back to stock condition you might consider this idea.

• You can send us your old tank.

• First empty the tank - eliminate all fumes - seal all openings and ship it to us.

• If your straps are in bad shape but good enough to take a pattern from, we can make new s.s.straps at an extra cost.

• Your tank will be cleaned and blasted thoroughly, then repaired.

• It will go through the gas tank Renu-USA Process with guaranteed results.This is a unique chemical bonding repair process that gives your gas tank a tough double layer ofprotection, inside and out. After the tank is treated it gets baked, providing a permanent fix.

• Is your old tank good enough to renew? We can save tanks that are rusty inside, but not leaking,and we can save tanks that are seeping at the seams, or have some minor holes. If in doubt, callbefore shipping.

REASONS TO BUY A NEW STAINLESS FUEL TANK• If you are without a tank for your car.

• If you are building a show car.

• If you are needing to change the location of the tank in your car.

• If you are considering a tune port motor in your car.

• If you are considering more capacity.

• If you are looking for a custom application in any car - truck - boat - tractor - etc. We feel we canhelp you.

WE HAVE PATTERNS FOR MANY TYPES OF VEHICLES AND MANY YEARS. PLEASE CALLFOR INFORMATION.

Sample of a tank after “Renu”

CALL FOR CURRENT PRICING

MasterCard

Page 3

®


STAINLESS STEEL GAS TANKS FOR FORD

Tank capacity is approximate = L x W x H x .004329

Part No. Year119-1020-SR 1928-34 Coupe and Roadsters (located inside the car) stands up

behind seat. Fill through trunk or rumble lid 17.0 Gal.119-1020-SR-TB Throttle Body Pump Assembly Installed119-1020-SR-TPI T.P.I. Pump Assembly Installed

119-1030-SR 1928-31 2-Door Sedan Tank (Located inside the car) behindrear seat. Includes custom brackets, package tray, and fills atleft side of car through body. 18.5 Gal. Price per kit

119-1030-SR-TB Throttle Body Pump Assembly Installed119-1030-SR-TPI T.P.I. Pump Assembly Installed

119-1045-SR 1928-31 Pickup Tank (Located under pickup box, has roll pan look) Fills through floor of box, (Includes recessed cup)


119-1050-SR 1932 Passenger - Stamped-Indent 15 Gal. 119-1050-SR-TB Throttle Body Pump Assembly Installed119-1050-SR-TPI T.P.I. Pump Assembly Installed

119-1055-SR 1932 Passenger - Stamped-Indent 20 Gal.119-1055-SR-TB Throttle Body Pump Assembly Installed119-1055-SR-TPI T.P.I. Pump Assembly Installed

119-1052-SR 1932 Hi-Boy - Includes fiberglass cover 15 Gal. 119-1052-SR-TB Throttle Body Pump Assembly Installed119-1052-SR-TPI T.P.I. Pump Assembly Installed

119-1057-SR 1932 Hi-Boy - Includes fiberglass cover 20 Gal. 119-1057-SR-TB Throttle Body Pump Assembly Installed119-1057-SR-TPI T.P.I. Pump Assembly Installed

119-1052-SR


MasterCard®

Page 4


ContinuedSTAINLESS STEEL GAS TANKS FOR FORD

Part No. Year119-1060-SR 1933-34 Passenger cars "Except 1934 Victoria" - 15 Gal.119-1060-SR-TB Throttle Body Pump Assembly Installed119-1060-SR-TPI T.P.I. Pump Assemble Installed

119-1065-SR 1933-34 Passenger cars "Except 1934 Victoria" - 20 Gal.119-1065-SR-TB Throttle Body Pump Assembly Installed119-1065-SR-TPI T.P.I. Pump Assembly Installed

*119-1062-SR 1933-34 Coupe-Roadster-Cabr. Trunk Fill - 15 Gal. *(See Note Below)


*119-1067-SR 1933-34 Coupe-Roadster-Cabr. Trunk Fill - 20 Gal. *(See Note Below)


119-1080-SR 1934-37 Pickup & 1934 Sed. Dlv & Victoria - 15 Gal.119-1080-SR-TB Throttle Body Pump Assembly Installed119-1080-SR-TPI T.P.I. Pump Assembly Installed

119-1085-SR 1934-37 Pickup & 1934 Sed. Dlv & Victoria - 20 Gal.119-1085-SR-TB Throttle Body Pump Assembly Installed119-1085-SR-TPI T.P.I. Pump Assembly Installed

119-1090-SR 1935-36 Passenger Car & Sed. Dlv - 15 Gal.119-1090-SR-TB Throttle Body Pump Assembly Installed119-1090-SR-TPI T.P.I. Pump Assembly Installed

119-1095-SR 1935-36 Passenger Car & Sed. Dlv - 20 Gal.119-1095-SR-TB Throttle Body Pump Assembly Installed119-1095-SR-TPI T.P.I. Pump Assembly Installed

*NOTE: Tank has a screw in removable neck that fills inside the trunk. The neck is located on the drivers side, far to the rear.‡NOTE: 1933-37 Ford “Shock Option” any or all of these options are available. Notching for Stock Shocks, 6-Hole Sending Unit

Hole and Neck for Stock Gas Cap.

119-1060-SR

1933-37 Ford “Shock Option” forStock Vehicle - Inc.: Notching/Neck (In Some Cases) /6-Hole


MasterCard®

Page 5



Part No. Year119-1105-SR 1937 Passenger Car & Woodie Wgn-15 Gal. (Ask About Floor Configuration)


119-1110-SR 1937 Passenger Car & Woodie Wgn - 20 Gal.119-1110-SR-TB Throttle Body Pump Assembly Installed119-1110-SR-TPI T.P.I. Pump Assembly Installed

*Ask About Floor Configuration

119-1117-SR 1938-40 Woodie Passenger Car & 40-41 Pickup - 15 Gal.119-1117-SR-TB Throttle Body Pump Assembly Installed119-1117-SR-TPI T.P.I. Pump Assembly Installed

119-1120-SR 1938-40 Woodie Passenger Car & 40-41 Pickup - 20 Gal.119-1120-SR-TB Throttle Body Pump Assembly Installed119-1120-SR-TPI T.P.I. Pump Assembly Installed

119-1129-SR 1941-48 Passenger Car & Station Wagon - 16 Gal.119-1129-SR-TB Throttle Body Pump Assembly Installed119-1129-SR-TPI T.P.I. Pump Assembly Installed

119-1130-SR 1941-48 Passenger Car & Station Wagon - 20 Gal.119-1130-SR-TB Throttle Body Pump Assembly Installed119-1130-SR-TPI T.P.I. Pump Assembly Installed

119-1134-SR 1948-52 Pickup - Under Bed. - 18 Gal.119-1134-SR-TB Throttle Body Pump Assembly Installed119-1134-SR-TPI T.P.I. Pump Assembly Installed

219-1136-SR 1949-51 Passenger Car - Stock Capacity - 20 Gal.219-1136-SR-TB Throttle Body Pump Assembly Installed219-1136-SR-TPI T.P.I. Pump Assembly Installed

219-1137-SR 1949-51 Ford Station Wagon219-1137-SR-TB Throttle Body Pump Assembly Installed219-1137-SR-TPI T.P.I. Pump Assembly Installed

119-1095-SR

1933-37 Ford “Shock Option”Inc.: Shock Notch

Stock Style Neck (In Some Cases)

6-Hole Sender


MasterCard

Page 6

®



Part No. Year ...................................................................................................219-1158-SR 1952-54 *Passenger Car - Stock Capacity - 17 Gal.219-1158-SR-TB Throttle Body Pump Assembly Installed219-1158-SR-TPI T.P.I. Pump Assembly Installed

*Requires Fuel Cap Number 419-2416

219-1190-T 1953-55 Pickup - Stock Capacity - 18 Gal.219-1190-T-TB Throttle Body Pump Assembly Installed219-1190-T-TPI T.P.I. Pump Assembly Installed

219-1180-SR 1955 Passenger Car - Stock Capacity - 17 Gal.219-1180-SR-TB Throttle Body Pump Assembly Installed219-1180-SR-TPI T.P.I. Pump Assembly Installed

219-1191-U 1953-56 P.U. 1/2 Ton - Underbed, Behind Rear Axle Location219-1191-U-TB Throttle Body Pump Assembly Installed 219-1191-U-TPI T.P.I. Pump Assembly Installed

219-1180-T 1955-56 Thunderbird - Stock Capacity - 20 Gal.219-1180-T-TB Throttle Body Pump Assembly Installed219-1180-T-TPI T.P.I. Pump Assembly Installed

219-1181-SR 1956 Passenger Car - Stock Capacity - 17 Gal.219-1181-SR-TB Throttle Body Pump Assembly Installed219-1181-SR-TPI T.P.I. Pump Assembly Installed

219-1182-T 1957 Thunderbird - Stock Capacity - 20 Gal.219-1182-T-TB Throttle Body Pump Assembly Installed219-1182-T-TPI T.P.I. Pump Assembly Installed

1963-1964 Galaxie Now Available

STAMPED STEEL GAS TANKS FOR 1932-48 FORD

These are Die Stamped Steel Tanks built to original specifications. For originalcars and street rods. They will accept 5-Hole and 6-Hole Sending Units.

Part No. YearB-9002 1932 Passenger - Stock Capacity - Accepts only 5-Hole Sender

WEN


ContinuedSTAMPED STEEL GAS TANKS FOR 1932-48 FORD

Part No. Year ...................................................................................................40-9002 1933-34 Passenger67-9002 1935-37 Pick-Up - for Cast Neck68-9002 1935-36 Passenger - For Cast Neck

78-9002 1937 Passenger - (Early) - For Cast Neck

81A-9002 1938-40 Passenger

11A-9002 1941-48 Passenger

99A-9002 1939-40 Mercury Passenger Car

BECAUSE YOU DIDN’T SEE IT DOES NOT MEAN WE DON’T BUILD IT.WE HAVE PATTERNS FOR LATER FORD PASSENGER CARS & TRUCKS

CALL US

STAINLESS STEEL GAS TANKSFOR 1939-51 MERCURY

Part No. Year119-1128-SR 1939-40 Car "Except Station Wagon" - 20 Gal.119-1128-SR-TB Throttle Body Pump Assembly Installed119-1128-SR-TPI T.P.I. Pump Assembly Installed

119-1130-SR 1941-48 Car "Except Station Wagon" - 20 Gal.(Same as 1941-48 Ford)


219-1180-M 1949-51 Cars-Stock Capacity, Mounts and Fits as Original - 20 Gal.We will make modifications if desired

219-1180-M-TB Throttle Body Pump Assembly Installed219-1180-M-TPI T.P.I. Pump Assembly Installed

SOME LATER YEAR MERCURY TANKS ARE AVAILABLECALL US

MasterCard®

Page 7



MasterCard

Page 8

®


STAINLESS STEEL 1940-48 GAS TANKS FOR LINCOLN

Part No. Year119-1180-L 1940-48 Stock Capacity, Mounts and Fits as Original - 22 Gal.

We will make modifications if desired119-1180-L-TB Throttle Body Pump Assembly Installed119-1180-L-TPI T.P.I. Pump Assembly Installed

SOME LATER YEAR LINCOLN TANKS ARE AVAILABLECALL US

WE CUSTOM BUILD TANKS FROM DRAWINGS OR SAMPLES.CALL US FOR INFORMATION AND PRICES. PROMPT DELIVERY.

Do’in Stainless Steel TanksFor Years!


MasterCard

Page 9

STAINLESS STEEL GAS TANKS FOR CHEVROLET

Part No. Year419-1010-SR 1931-32 Passenger Car - 20 Gal. 419-1010-SR-TB Throttle Body Pump Assembly Installed419-1010-SR-TPI T.P.I. Pump Assembly Installed

419-1015-SR 1931-32 Pass. Car Using Corvette Rear End. Specify Year of Rear End 419-1015-SR-TB Throttle Body Pump Assembly Installed419-1015-SR-TPI T.P.I. Pump Assembly Installed

419-1020-SR 1933 Passenger Car - 18.5 Gal.419-1020-SR-TB Throttle Body Pump Assembly Installed419-1020-SR-TPI T.P.I. Pump Assembly Installed

419-1025-SR 1934 Standard & 35 STD. 3W Coupe (Steel) - 18.5 Gal.419-1025-SR-TB Throttle Body Pump Assembly Installed419-1025-SR-TPI T.P.I. Pump Assembly Installed

419-1030-SR 1934 Master - 18.5 Gal.419-1030-SR-TB Throttle Body Pump Assembly Installed419-1030-SR-TPI T.P.I. Pump Assembly Installed

419-1035-SR 1935 Standard 5W Coupe & Fiberglass Body - 18.5 Gal. 419-1035-SR-TB Throttle Body Pump Assembly Installed419-1035-SR-TPI T.P.I. Pump Assembly Installed

419-1040-SR 1935 Standard Sedan - 18.0 Gal. 419-1040-SR-TB Throttle Body Pump Assembly Installed419-1040-SR-TPI T.P.I. Pump Assembly Installed

419-1042-SR 1936 Pickup - 19.0 Gal.419-1042-SR-TB Throttle Body Pump Assembly Installed419-1042-SR-TPI T.P.I. Pump Assembly Installed

419-1045-SR 1936 Standard Coupe - 18.0 Gal. 419-1045-SR-TB Throttle Body Pump Assembly Installed419-1045-SR-TPI T.P.I. Pump Assembly Installed

®


419-1010-SR


MasterCard®

Page 10


ContinuedSTAINLESS STEEL GAS TANKS FOR CHEVROLET

Part No. Year419-1048-SR 1936 Standard Sedan 18.0 Gal.419-1048-SR-TB Throttle Body Pump Assembly Installed419-1048-SR-TPI T.P.I. Pump Assembly Installed

419-1050-SR 1937 Sedan - 18.0 Gal. (Note - See PN: 419-1455 - pg. 12)419-1050-SR-TB Throttle Body Pump Assembly Installed419-1050-SR-TPI T.P.I. Pump Assembly Installed

419-1055-SR 1938-39 Sedan - 20.0 Gal. Convert - 5 Pass. Coupe


(Fill Thru R. Fender)

419-1060-SR 1937-40 3 Pass. Coupe - Stock Capacity (fills thru 1/4 panel) - 20 Gal.419-1060-SR-TB Throttle Body Pump Assembly Installed419-1060-SR-TPI T.P.I. Pump Assembly Installed

(Mounts Inside Car - Fills Thru 1/4 Panel)

419-1065-SR 1940 Sedan - Convert - 5 Pass. Coupe - 19.0 Gal.419-1065-SR-TB Throttle Body Pump Assembly Installed419-1065-SR-TPI T.P.I. Pump Assembly Installed

(Fills thru R. Fender)

419-1068-SR 1941-48 3 Passenger Coupe and Sedan Dlv - Stock Capacity - 18.5 Gal. 419-1068-SR-TB Throttle Body Pump Assembly Installed419-1068-SR-TPI T.P.I. Pump Assembly Installed

419-1070-SR 1941-48 5 Passenger Coupe and Convertible - 20.0 Gal.419-1070-SR-TB Throttle Body Pump Assembly Installed419-1070-SR-TPI T.P.I. Pump Assembly Installed

419-1075-SR 1941-48 Sedan - 16.0 Gal.419-1075-SR-TB Throttle Body Pump Assembly Installed419-1075-SR-TPI T.P.I. Pump Assembly Installed

419-1050-SR


MasterCard®

Page 11


ContinuedSTAINLESS STEEL GAS TANKS FOR CHEVROLET

Part No. Year419-1077-SR 1941-46 Pickup 1/2-Ton Tank - Stock Capacity & Location - 24.5 Gal. 419-1077-SR-TB Throttle Body Pump Assembly Installed419-1077-SR-TPI T.P.I. Pump Assembly Installed

419-1080-SR 1947-54 (First Series 55) Suburban, 1/2-Ton Panel & 47-48 P.U.Stock Capacity - 13.5 Gal.


419-1082-SR 1947-54 Under Pickup Bed Tank, Located Behind Rear Axle - 20.5 Gal. 1st Series “55 Spare Tire Mount Must be Eliminated - fits 1/2 ton only.


419-1085-SR 1949-52 Car - Stock Capacity - 16 Gal.419-1085-SR-TB Throttle Body Pump Assembly Installed419-1085-SR-TPI T.P.I. Pump Assembly Installed

419-1090-SR 1953-54 Passenger Car - Except Station Wagon - 18.5 Gal. 419-1090-SR-TB Throttle Body Pump Assembly Installed419-1090-SR-TPI T.P.I.I Pump Assembly Installed

419-1096-SR 1955-59 Under Pickup Bed Tank, Located Behind Rear Axle - 20 Gal. 2st Series “55-59 Spare Tire Mount Must be Eliminated - fits 1/2 tone only.


ALL TANKS ARE HAND FABRICATED

PLEASE ALLOW APPROXIMATELY6 TO 8 WEEKS DELIVERY ON ALL

GAS TANKS


MasterCard®

Page 12


STAINLESS STEEL GAS TANKSFOR CLASSIC 55-57 CHEVROLET

Part No Year419-1130 1955-56 Passenger Except Station Wagon - Stock Capacity - 18 Gal.

S/S mounting straps furnished. Specify top mount or original sender location.419-1130-TB Throttle Body Pump Assembly Installed419-1130-TPI T.P.I. Pump Assembly Installed

*Available in Extra Capacity (Additional Charge)

419-1135 1957 Passenger Except Station Wagon - Stock Capacity - 18 Gal.S/S mounting straps furnished. Specify sender location.

419-1135-TB Throttle Body Pump Assembly Installed419-1135-TPI T.P.I. Pump Assembly Installed

*Available in Extra Capacity (Additional Charge)

419-1156-SR 1962-67 Nova - Stock Capacity - Except 62-63 Wagon & 9 passengerMust use bolt in sending unit - S/S mounting straps furnished.


419-1170-SR 1967-68 Camaro - Stock CapacityMust use bolt in sending unit - S/S mounting straps furnished.


419-1171-SR 1969 Camaro - Stock CapacityMust use bolt in sending unit - S/S mounting straps furnished.


NOTE: Tanks include mounting straps and fit with no modifications.

Gas Tank Fits Classic55-57 Chevrolet


MasterCard

Page 13

®


STAMPED STEEL GAS TANKSFOR CHEVROLET

Part No. Year419-1131 1955-56 Passenger Car Except Station Wagon - Stock Capacity - 18 Gal.

No mounting straps furnished419-1131-TB Throttle Body Pump Assembly Installed419-1131-TPI T.P.I. Pump Assembly Installed

419-1132 1955-56 Station Wagon/Nomad - Stock CapacityNo mounting straps furnished

419-1132-TB Throttle Body Pump Assembly Installed419-1132-TPI T.P.I. Pump Asembly Installed

419-1136 1957 Passenger Car Except Station Wagon - Stock Capacity - 18 Gal.No mounting straps furnished


419-1137 1957 Station Wagon/Nomad - Stock CapacityNo mounting straps furnished


419-1159 1964-67 Chevelle No mounting straps furnished


* MANY OTHER “MUSCLE CAR” ERA TANKS AVAILABLECALL FOR DETAILS & AVAILABILITY (Ford, Chevy, Mopar and More)NOTE: Mounting Straps Available at Additional Cost

MOUNTING STRAPS419-1410 1955-57 Stainless Straps Only.419-1440 1967-69 Stainless Straps Only - Camaro419-1455 1937 Chevy Upper Straps419-1465 1955-57 Steel Straps as Original - Sedan419-1475 1955-57 Steel Straps as Original - Station Wagon - Nomad

Straps Can Also Be Made to Order - Call For Prices

55-56 ChevroletGas Tank


MasterCard®

Page 14


STAINLESS STEEL GAS TANKSFOR 1953-67 CORVETTE

Part No. Year419-1175-V 1953-55 Stock Capacity419-1175-V-TB Throttle Body Pump Assembly Installed419-1175-V-TPI T.P.I. Pump Assembly Installed

419-1180-V 1956-62 Stock Capacity419-1180-V-TB Throttle Body Pump Assembly Installed419-1180-V-TPI T.P.I. Pump Assembly Installed

419-1185-V 1963-67 Stock Capacity419-1185-V-TB Throttle Body Pump Assembly Installed419-1185-V-TPI T.P.I. Pump Assembly Installed

NOTE: Mounting straps furnished.

STAINLESS STEEL GAS TANKSFOR PLYMOUTH - DODGE

Part No. Year619-1010 1933-34 Short Wheel Base Coupe (Round Tank) - 18.5 Gal. 619-1010-TB Throttle Body Pump Assembly Installed619-1010-TPI T.P.I. Pump Assembly Installed

619-1015 1933-34 Long Wheel Base Coupe (Oval Tank) - 18.5 Gal.619-1015-TB Throttle Body Pump Assembly Installed619-1015-TPI T.P.I. Pump Assembly Installed

619-1020 1933-34 Short Wheel Base Sedan - 18.5 Gal. 619-1020-TB Throttle Body Pump Assembly Installed619-1020-TPI T.P.I. Pump Assembly Installed

619-1025 1933-34 Long Wheel Base Sedan - 18.5 Gal. 619-1025-TB Throttle Body Pump Assembly Installed619-1025-TPI T.P.I. Pump Assembly Installed


MasterCard®

Page 15


STAINLESS STEEL GAS TANKSFOR PLYMOUTH - DODGE

Part No. Year619-1040 1937-38 Stock Capacity - 21 Gal.619-1040-TB Throttle Body Pump Assembly Installed619-1040-TPI T.P.I. Pump Assembly Installed

619-1045 1939 Stock Capacity - 20 Gal.619-1045-TB Throttle Body Pump Assembly Installed619-1045-TPI T.P.I. Pump Assembly Installed

619-1050 1941-48 Stock Capacity - 18.5 Gal.619-1050-TB Throttle Body Pump Assembly Installed619-1050-TPI T.P.I. Pump Assembly Installed

Plymouth and Dodge Tanks Require 419-2416 Fuel Cap.

OTHER YEARS – CALLNOTE: If your 1933-34 Plymouth, or Dodge, original gas tank was round, you have a short wheel base car. Ifyour original tank was oval you have a long wheel base car. On the short wheel base coupe we have found twodifferent style necks, therefore the short wheel base coupe tank will come with a two piece neck to insure properfit. Stainless steel straps are supplied with Plymouth and Dodge tanks.

WE HAVE MANY PATTERNS TO BUILD TANKS FOR VEHICLES SUCH AS BUICKS - OLDSMOBILES CADILLACS - CHRYSLERS - NASH - PACKARD - HUDSON - REO - KAISER - FRAZER

AUBURN - COBRA - FIAT - WILLIES - JEEP - ESSEX - DURANT - COAST TO COAST - DOWNSOLD CHICAGO - MINOTTI - ETC.

WE CUSTOM BUILD TANKS FROM DRAWINGS OR SAMPLES.CALL US FOR INFORMATION, PRICES AND DELIVERY.


MasterCard

Page 16

®


TUNE PORT AND THROTTLE BODY INJECTIONIN TANK PUMP INFORMATION

Lock ring installation

Stainless fuel pump stand

New hi-pressure – hi-volume pump

New filter

"O" ring seal

Die stamped openingrecessed for

floor clearance

Easy fuel line hook upEasy electrical hook up

Internal stainless fuel trap – prevents pump starvation

FACTSFuel pump starvation can be caused by vapor lock or from the fuel being washed away from the fuelpickup. The pump depends on the fuel for cooling and lubrication. If for any reason fuel is interrupt-ed, even briefly, the engine will stumble or die. This is very hard on the pump. We highly recom-mend internal tank pumps.

The bitterness of poor quality remains longafter the sweetness of low price is forgotten.

May we recommend an access door in your trunkto service your sender and TPI pump.See page 46


MasterCard

Page 17

®


TUNE PORT INJECTIONIN TANK PUMP INFORMATION

The factory has good reasons for submerging their fuel pumps in the tanks of their tune port injectedvehicles. This system requires a high pressure-high volume fuel pump and has a return line, so all theunused fuel gets returned to the tank rather than staying in the line. This combination causes every-thing to happen very quickly — if fuel washes away from the pick up point for even a short time a blockof air gets to the motor almost immediately. Not only does this cause the motor to stumble or die, it'salso very hard on the pump because it gets its lube from the fuel.

The fix for this is to build a trap around the pump to retain the gas at the pickup point. This is themajor reason for submerging the pump — but not the only one. The tank acts as a heat shield from theroad and exhaust heat, giving the pump a longer operating life by keeping it cool. It also reduces thechance of vapor locking. These facts, combined with the much neater installation and appearance,make the submerged pump the hands down choice over the external fuel pump application.

Rock Valley submerges their pumps with 100% stainless steel hardware to maintain the highestquality possible.

DEALING WITH YOUR ORIGINAL STEEL TANKIn some cases it is an advantage to use your original factory tank. To decide which is best for your

car, call. It can be discussed over the phone.

Original used tank . . . . . . . . . . . . . . . . . . . . . . . . Call for current pricingNew Steel Reproduction Tanks . . . . . . . . . . . . . . Call for current pricingNew Aluminum Tank . . . . . . . . . . . . . . . . . . . . . . Call for current pricingSump Added to tanks . . . . . . . . . . . . . . . . . . . . . . Call for current pricing(Required on tanks less than 8” deep)

THE TUNE PORT INJECTED MOTOR FOR STREET RODS — CUSTOMS —HI-PERFORMANCE TRUCKS AND STREET MACHINES, IS THE WAY OF THE FUTURE.FOR TECHNICAL SUPPORT IN T.P.I. ENGINE INSTALLATION, MAY WE RECOMMEND:

P.O. BOX 1169MENA, ARKANSAS

ALUMINUM-RACING & STREET SPECIALTIES 501-394-5711


TUNED PORT INJECTION KITS119-1510-SR

AVAILABLE IN NEW TANKS OR AS A KIT TO INSTALL IN YOURPRESENT TANK. INSIDE DEPTH MUST BE 7" OR MORE.

COMPLETELY ASSEMBLED, WIRED ANDREADY TO INSTALL.ROCK VALLEY'S T.P.I. OPTION

FEATURES:• Die stamped opening• Stainless fuel pump stand• Lock ring installation — with 'O' ring• Easy fuel line hook up• Easy electrical hook up• New hi-pressure — hi-volume pump• New filter• Stainless fuel trap — prevents pump starvation

Part No.

119-1510-SR T.P.I. Kit (specify depth of tank)119-1511-SR T.P.I. Kit with 1999 and Newer LS-1 Fuel Pump119-1515-SR T.P.I. Kit with Holley Ultra Hi Pressure Fuel Pump119-1520-SR Throttle Body Injection Pump Kit

PRICE FOR T.P.I. OPTION ONLY. DOES NOT INCLUDE COST OF THE TANK.


MasterCard

Page 18

®



MasterCard

Page 19

®


TYPE TWO• Draw a sketch of the tank you might want.• Make a cardboard or poster board mock-up of the tank, masking tape or duct tape work

well. A paper towel roll works well to locate the neck in most cases.• Fit the mock-up tank to the car, consider clearance for - fittings - sending unit - vent - floor

braces - neck - exhaust, or any other projection that might interfere.• The tank can be mounted by straps or brackets.• Choices of necks are located on page 20-21.• Specify the brand of gauges you intend to use.• If you are going to polish your tank you may want 14 gauge to insure against warpage.• Be sure to include your phone or fax number so we can contact you.• Price: We will give you a firm quote before work is started.

SEE PAGE 45FOR ACCESS DOOR.MAKES IT EASYTO SERVICE SENDER& T.P.I.

Capacity FormulaH x W x L x .004329 = Gal.

SYMBOLSF = Front of CarR = Rear of CarLH = Drivers Side (Left)RH = Passenger Side (Right)SU = Sending UnitRAD = Radiused CornersN = Neck LocationFPU = Fuel PickupV = Vent LocationTPI = Tune Port Pump Locations

HOW TO ORDER AND DESIGNYOUR CUSTOM STAINLESS STEEL TANK

Custom tanks can be broken down into two types.TYPE ONE would be to reproduce your original tank.TYPE TWO would be a one of a kind, specially made for your car.

TYPE ONECall us and see if we might already have a sample tank for the car you want to do, if not, you cansend your tank and a strap. We will fabricate a tank and new straps to fit in the stock locationeven if you might want to make changes in the - width - depth (for more capacity), - sending unit,or - Internal pump for T.P.I.

FPUSU

TPI

V

NHEIGHT

LENGTH

WIDTH

(It is best to draw top view, side view and front view.)

RAD

MasterCard

Page 20

®

118-3589-SR Replacement LS-1 Type Pump

118-3588-SR Replacement Internal Low Pressure ThrottleBody Fuel Pump

118-3590-SR Replacement Internal - Hi Pressure Fuel PumpFor T.P.I. Unit

118-3591-SR Holley Hi-Performance Hi-Pressure Fuel Pump

118-3592-SR Replacement Fuel FilterFor Internal Fuel Pump

118-3920-SR Replacement T.P.I. Fuel Pump Opening"O" Ring .

118-3932-SR Replacement T.P.I. Fuel Pump OpeningLock Ring


118-3590-SR


MasterCard

Page 21

®


ECONOMY GAS TANK NECKS

Part No. Year

119-1620 Ford Style Universal Neck. Accepts Ford locking gas cap, orstock 1932-48 Ford cap

119-1643 1933-34 Neck – Fits 1933-34 Ford Sedan Delivery and Station Wagon119-1644 1933-34 Pickup and Victoria Gas Neck. Fits our tanks.

Use 2" connector hose119-1646 1935-37 Pickup Gas Neck. Fits our tanks.

Use 2" connector hose119-1650 1935-37 Passenger Gas Neck

119-1653 1938 Neck Fits all except: (2-door DLX, 4-door DLX)

119-1655 1938-40 Neck Fits 38 (2-door DLX) (4-door DLX)39-40 All Models

119-1670 1942-48 Passenger Gas Neck

STAINLESS STEEL GAS TANK NECKS

119-1620

119-1650

119-1644 119-1670

2-1/2" dia. 2-1/2" dia.A B C

2"

6" 6" 6"

2"

Threads

Part No.119-1610-SR A. Threaded Neck. Accepts our leak proof cap 119-2440. Requires vent119-1620-SR B. Ford Style Universal Neck. Accepts Ford locking gas cap, or

stock 1932-48 Ford cap419-1610-SR C. Chevrolet Style Universal. Accepts Chevrolet locking gas

cap or stock cap

119-1610-SR 119-1620-SR

2-1/2" dia.

2"

419-1610-SR


MasterCard®


STAINLESS STEELGAS TANK NECKS

119-1630-SR Floor Mount Neck. Accepts our threaded cap 119-2440 and requires vent. Cap sits lower than mount flange, so you can put a cover over thisneck. Ideal for trunk floors, pick-up beds and Sedan delivery floors

119-1640-SR Threaded Neck. Accepts our threaded cap 119-2440and requires vent

119-1641-SR Aluminum Filler Cap and Weld in Steel Bung used on Mini Necks

119-1642-SR Universal Mini Threaded Neck and Cap. For use behind smallgas door, gas opening 1 1/4" dia., requires vent

119-1643-SR Neck—Fits 1933-34 Ford Sedan Delivery, Station Wagon 119-1644-SR Pickup and Victoria Gas Neck. Fits our tanks.

1933-34 - Use 2” connector hose119-1645-SR Recessed Cup with drain, the center hole is 2-1/2" dia.

This cup can be used in a pickup body or truck floor to slideover one of our threaded necks

119-1646-SR 1935-37 Pickup Gas Neck. Fits our tanksUse 2" connector hose

119-1650-SR 1935-37 Neck (Fits all models - cars)

119-1653-SR 1938 Neck (Fits all except: 2-door DLX, 4-door DLX)

119-1655-SR 1938-40 Neck (Fits 38 2-door DLX, 4-door DLX)39-40 All Models

119-1670-SR 1942-48 Passenger Gas NeckMade of 304 stainless, a copy of the original, they will accept a 1932-48 Ford gas cap. Either locking or non-locking.

CUSTOM GAS NECKSWE BUILD CUSTOM GAS NECKS TO YOUR SPECIFICATIONS FROM A DRAWING OR SAMPLE.

9"

2"

4-1/4"

1-3/4"

2-1/2"

3-3/8"3-1/4"

1" 4-1/8"

119-1645-SR2-1/2"

119-1630-SR 119-1640-SR 119-1642-SR 119-1644-SR


MasterCard®


Page 23

EXTENSION TUBING

Part No.

119-1680-SR12 Tubing S/S 16 Ga. 1-1/2 Dia. x 12 Long119-1680-SR6 Tubing S/S 16 Ga. 1-1/2 Dia. x 6 Long119-1682-SR12 Tubing S/S 16 Ga. 1-3/4 Dia. x 12 Long119-1682-SR6 Tubing S/S 16 Ga. 1-3/4 Dia. x 6 Long119-1684-SR12 Tubing S/S 16 Ga. 2 Dia. x 12 Long119-1684-SR6 Tubing S/S 16 Ga. 2 Dia. x 6 Long119-1686-SR12 Tubing S/S 16 Ga. 2-1/4 Dia. x 12 Long119-1686-SR6 Tubing S/S 16 Ga. 2-1/4 Dia. x 6 Long119-1688-SR12 Tubing S/S 16 Ga. 2-1/2 Dia. x 12 Long119-1688-SR6 Tubing S/S 16 Ga. 2-1/2 Dia. x 6 Long119-1694-SRA Neck Elbow 45 Degree, 2 Dia. 16 Ga. S/S119-1694-SRB Neck Elbow 90 Degree, 2 Dia. 16 Ga. S/S

119-1684-SR6 119-1684-SR12 119-1694-SRB119-1694-SRA


MasterCard®

Page 24


FUEL TANK ACCESSORIES

Part No.119-1725 Gas Neck Connector Hose. 1-1/2" ID x 3" long119-1728 Gas Neck Connector Hose. 1-3/4” ID x 3” long119-1730 Gas Neck Connector Hose. 2" ID x 3" long119-1735 Gas Neck Connector Hose. 2 1/4" ID x 3" long119-1740 Gas Neck Connector Hose. 2 1/2" ID x 3" long

119-1810 Ball Check. Vent Valve Prevents gas spillage butallows air to enter tank

119-1820 Ball Check Fitting. Stainless steel threaded bung, must bewelded in tank. Accepts our Ball Check

119-1822 Universal 3/8” Stainless Steel Threaded Bung. Must bewelded in tank.

119-1824 Universal 1/2” Stainless Steel Threaded Bung. Must bewelded in tank.

UNIVERSAL STAINLESS STEELFUEL PICKUP TUBES

Part No.

119-1916 1/2” Dia. x 12” Long 1/4 NPT119-1918 1/2” Dia. x 18” Long 1/4 NPT119-1920 1/2” Dia. x 24” Long 1/4 NPT119-1922 1/2” Dia. x 12” Long 3/8 NPT119-1924 1/2” Dia. x 18” Long 3/8 NPT119-1926 1/2” Dia. x 24” Long 3/8 NPT

3"

2" 2-1/4" 2-1/2" 1-1/2"

3" 3" 3"

119-1730 119-1735 119-1740 119-1725

119-1810

119-1820 119-1822 119-1824


MasterCard®

Page 25


ASSORTED FUEL TANK FITTINGS

Part No. FUEL TANK PIPE PLUGS119-4510 1/4” brass 119-4520 3/8” brass119-4530 1/2” brass

FUEL TANK HOSE - BARBED FITTINGS119-4610 Straight 1/4” pipe to 1/4” 119-4612 Straight 1/4” pipe to 5/16”119-4614 Straight 1/4” pipe to 3/8” 119-4616 Straight 3/8” pipe to 3/8” 119-4620 45° - 1/4” pipe to 1/4” 119-4622 45° - 1/4” pipe to 5/16” 119-4624 45° - 1/4” pipe to 3/8” 119-4626 45° - 3/8” pipe to 3/8” 119-4630 45° - 1/4” pipe to 1/4” 119-4632 90° - 1/4” pipe to 5/16”119-4634 90° - 1/4” pipe to 3/8” 119-4636 90° - 3/8” pipe to 3/8”

FUEL TANK TO FUEL LINE FITTINGS119-4710 Straight 1/4” pipe to 1/4” AN-37°119-4712 Straight 1/4” pipe to 5/16” AN-37°119-4714 Straight 1/4” pipe to 3/8” AN-37°119-4716 Straight 3/8” pipe to 3/8” AN-37°119-4730 90° - 1/4” pipe to 1/4” AN-37°119-4732 90° - 1/4” pipe to 5/16” AN-37°119-4734 90° - 1/4” pipe to 3/8” AN-37°119-4736 90° - 3/8” pipe to 3/8” AN-37°

119-4610

119-4510

119-4730

119-4632

119-4710

119-4620


MasterCard

Page 26

®


FUEL TANK ACCESSORIES ContinuedPart No. FUEL LINE HOSE119-4810 1/4” Fuel Line Hose119-4820 5/16” Fuel Line Hose119-4830 3/8” Fuel Line Hose

GAS TANK MOUNT HARDWARE119-5010 1932-48 Ford Gas Tank mount, bolt & spring kit119-5012-SS 1932-48 Ford Gas Tank mount, bolt & spring kit, S/S

GAS CAPS - Ford & Chevrolet

119-2416 1932-48 Gas Cap. Fits Ford Passenger & Pick-Up119-2418 1932-48 Gas Cap. Original Style-S/S Polished, Sealed, Not Vented119-2425 1932-48 Locking Gas Cap. Fits Ford 419-2416 1931-48 Gas Cap. Fits Chevrolet Passenger, Pick-Up & R.V. Plymouth419-2425 1931-48 Locking Gas Cap. Fits Chevrolet & R.V. Plymouth119-2440 Universal Rock Valley Gas Cap. Threaded (For vented tanks only)119-2440-P Universal Rock Valley Gas Cap. Polished, Threaded (For vented tanks only)119-2441 “O” Ring. (For Rock Valley Aluminum Gas Cap)

119-2950 Sending Unit - Weld-In Reinforcement Plate.Adapts to all sending units listed below (Stainless Steel)

119-2950A Sending Unit - Weld-In Reinforcement Plate.Adapts to all sending units listed below (Aluminum)

119-2951 Sending Unit - Bolt in block off plate

GAS TANKSENDING UNITS

119-2915 Sending Unit Adapter. From Ford 6 hole to universal 5 hole mt.119-2810-SR Stewart Warner Sending Unit. 240-33 Ohm119-2812-SR V.D.O. Sending Unit. Replace S.W. 240-33 Ohm119-2820-SR V.D.O. Sending Unit. 10-180 Ohm119-2828-SR Ford & Chrysler Replacement Fuel Sending Unit. 73-10 Ohm119-2830-SR V.D.O. Sending Unit. For late model G.M. Gauges 0-90 Ohm419-2840 1931-54 Chevrolet Fuel Sending Unit. 0-30 Ohm

This unit is 100% U.S. made, and will fit 6" to 24" deep tanks. It’s very easy to adjust the height. It has the 5-screw pattern, same as original,and is designed so you can use it in the stock Chevrolet tanks or our new stainless tanks. This will work for the restorer using his originalgages, or the street rodder wanting to keep his original gages. It operates on 6-volt or 12-volt.

119-2860-SR Sending Unit Gasket. Fits stock Chevrolet, StewartWarner, V.D.O., Classic, and Sun Senders

119-2425 419-2425 119-2440 119-2441

119-2810-SR

119-2830-SR

119-2950 119-2951


MasterCard

Page 27

®


“CHROME” BUMPERS FOR FORD

Part No. Year170-1018 1932 Passenger and Pickup, Chrome Plated,

front and rear170-1020 1933 Passenger Car, Chrome Plated,

front and rear170-1022 1933 Pickup, Chrome Plated,

front170-1024 1934 Passenger, Chrome Plated, except “Vicky”


front170-1028 1935 Passenger, Chrome Plated,


front170-1032 1936 Passenger, Chrome Plated,


front170-1036 1937 Passenger - front only, Pickup - front and rear

Chrome Plated170-1038 1937 Passenger, Chrome Plated,

rear only170-1042 1938-39 Passenger, Chrome Plated,and P/U Truck

front and rear (not for 39 Deluxe)170-1044 1939 Passenger - Deluxe Only, Chrome Plated,

front and rear170-1048 1940 Passenger and Pickup, Chrome Plated,

front and rear and 40-41 Pick-Up Front170-1049 1940-41 Pickup, Chrome Plated, rear*170-1052 1942-46 Passenger Front Chrome Plated*170-1054 1942-46 Passenger Rear Chrome Plated

170-1024


®

MasterCard

Page 28


STAINLESS STEEL BUMPERS FOR FORD

Part No. Year170-1022-SR 1933 Passenger Car Stainless Bumper

front & rear170-1022A-SR 1933 Pickup Stainless Bumper

front

170-1024-SR 1934 Passenger Car Stainless Bumper, except “Vicky”front and rear

170-1026-SR 1934 Pickup Stainless Bumperfront

170-1028-SR 1935 Passenger Car Stainless Bumperfront and rear

170-1030-SR 1935 Pickup Stainless Bumperfront

170-1044-PS

STAINLESS STEEL NOSTALGIA NURF BAR KITS

FOR ANY VEHICLEOnly Available in ‘Kit-Form’ for you Do-It-Yourselfers! - unpolished

Continued“CHROME” BUMPERS FOR FORD

*170-1056 1947-48 Passenger Front Chrome Plated*170-1058 1947-48 Passenger Rear Chrome Plated

*NOTE: Also Available Plain No Holes, Raw, Smooth with Studs Welded on Back.


MasterCard

Page 29

®


170-1076-SS

170-1078-SS170-1074-SS

170-1044-PS 1939 Passenger Car Deluxe only. Stainless Polishedsmooth, no bolt holes, stud mountedfits front and rear

170-1048-PS 1940 Passenger Car - front and rear; & 40-41 Pickup - frontPolished Stainless, smooth, no bolt holes, stud mounted

170-1049-PS 1940-41 Pickup, Sedan Delivery and Station Wagon - rear Polished Stainless, smooth, no bolt holes, stud mounted

170-1068-PS 1942-47 Pickup, Polished Stainless, front only, smooth, no bolt holes, stud mounted

170-1069-PS 1942-47 Pickup, Polished Stainless, front only (with holes)

Part No. Year170-1074-SS 1948-52 Pickup, Polished Stainless , front

Correct for 1948-50 - will fit 1951-52

170-1076-SS 1948-56 Pickup, Polished Stainless, rear

170-1078-SS 1953-56 Pickup, Polished Stainless, front

STAINLESS STEEL BUMPERS FOR FORDPart No. Year170-1032-SR 1936 Passenger Car Stainless Bumper

front and rear 170-1032A-SR 1936 Pickup Stainless Bumper

front

170-1036-SR 1937 Passenger - front only; Pickup Stainless Bumperfront and rear

170-1038-SR 1937 Passenger Car Stainless Bumperrear only

170-1042-SR 1938-39 Passenger Car and Pickup StainlessBumper front and rear (will not fit 39 Deluxe)


MasterCard

Page 30

®


“CHROME” BUMPERS AND PARTSFOR CHEVROLET

1931-32 Front Bumper and Brace Shown

NOTE: All chrome bumpers are triple plated with copper, nickel, and chrome.Part No. Year470-1020 1931-32 Passenger and Pickup, front

470-1022 1931-32 Bumperette Style—2 pc set, rear

470-1024 1931-32 Full Length, rearAlso Fits 34-36 Pickup Rear

470-1025 1933 Passenger and Pickup, front

470-1030 1934-35 Passenger, Standard front

470-1040 1934 Passenger, Master front, Pickup front,Original Style, with hump in center. 34-36 Pickup front.

470-1045 1933-34 all, 1935 Standard rear, Original Style, with hump in center

470-1045-CH-SR 1933-34 all, 1935 Standard,R.V.A. Special rear bumper without hump

NOTE: This bumper is used on cars without a rear mounted spare. It is straight,does not have the hump to go around the spare tire. Must be used with our R.V.A.Special rear bumper braces Part #470-1526-SR or Part #470-1526-SS-SR.

470-1050 1936 Standard front

470-1045

470-1020

470-1510


MasterCard®

Page 31


“CHROME” BUMPERS FOR CHEVROLET1936-37 Style Shown

Part No. Year

470-1060 1936-37 36 Standard rear, 37 Passenger, Master front and rear,and 37 Pickup, front

470-1070 1938-39 Passenger and Pickup, front and rear

470-1080 1940 Passenger and Pickup, front and rear

470-1085 1941-46 Pickup front and rear

470-1090 1947-54 Panel Delivery and Suburban - front and rear; Pickup front

470-1094 1947-53 Pickup rear

470-1070

470-1060


STAINLESS BUMPERSFOR CHEVROLET

Part No. Year470-1020-SS 1931-32 Passenger and Pickup, front

470-1022-SS 1931-32 Bumperette Style–2 pc set, rear

470-1024-SS 1931-32 Full Length, rearAlso Fits 34-36 Pickup Rear

470-1025-SS 1933 Passenger and Pickup, front

470-1030-SS 1934-35 Passenger, Standard front

470-1040-SS 1934 Passenger-Master front, and 34-36 Pickup - Original Style with hump in center

470-1045-SS 1933-34 all, 1935 Standard rear, Original Style with hump in center

470-1045-SS-SR 1933-34 all, 1935 Standard, R.V.A.Special rear bumper without hump

NOTE: This bumper is used on cars without a rear mounted spare. It is straight,does not have the hump to go around the spare tire. Must be used with our R.V.A. Special rear bumper braces Part #470-1526-SR or Part #470-1526-SS-SR.

470-1050-SS 1936 Standard front

470-1060-SS 1936-37 36 Standard rear, 37 Passenger, Master front and rear,and 37 Pickup, front

MasterCard®

Page 32



MasterCard®


Page 33

STAINLESS BUMPERS FOR CHEVROLETPart No. Year470-1060-SS 1937 Master front or rear, Polished Stainless

470-1085-SR 1941-46 Pickup front or rear, Polished Stainless

470-1090-SR 1947-54 Pickup front, Panel Delivery andSuburban front or rear, Polished Stainless

470-1094-SR 1947-53 Pickup rear, Polished Stainless

STAINLESS “SMOOTH” BUMPERSFOR CHEVROLET

With Street Rodders in mind. We have removed the center grooves and the bumper boltholes. We have put stainless studs on the back side. The polished finish goes very well withthe new smooth look.

Part No. Year470-1032-SR 1935-36 Master, smooth front bumper, stud mount,

Polished Stainless. These fit original braces, but appear different than original bumper. Intended for street rods.

470-1046-SR 1935-36 Master, smooth rear bumper, stud mount,Polished Stainless. These fit original braces, but appeardifferent than original bumper. Intended for street rods.

470-1064-SR 1937 Master Deluxe, smooth front-rear bumper, stud mount,Polished Stainless. These fit original braces, but appear different than original bumper. Intended for street rods.

470-1070-SR 1938-39 Smooth Polished Stainless, front or rear

470-1080-SR 1940 Passenger & Pickup Smooth Polished Stainless, front or rear

470-1070-SR


Part No. Year170-1520 1932 Front Bumper Braces, set, Pass. and P/U170-1522 1932 Rear Bumper Braces, set, Pass.170-1523-SR 1932 "SNUG" Rear Bumper Braces, set, locates bumper

closer to body – plain170-1524 1933 Front Bumper Braces, set, Pass. and P/U170-1526 1933 Rear Bumper Braces, set, Pass.170-1527-SR 1933 "SNUG" Rear Bumper Braces, set, locates bumper

closer to body – plain170-1528 1934 Front Bumper Braces, set, Pass. and P/U170-1530 1934 Rear Bumper Braces, set, Pass. Except Victoria170-1532 1934 Rear Bumper Braces, set, Victoria only170-1533-SR 1934 "SNUG" Rear Bumper Braces, set, locates bumper

closer to body – plain170-1534 1935 Front Bumper Braces, set, Pass. and Pick-up170-1536 1935 Rear Bumper Braces, set, Pass. Car170-1538 1936 Front Bumper Braces, set, Pass. and P/U170-1540 1936 Rear Bumper Braces, set, Pass.170-1541-SR 1935-36 "SNUG" Rear Bumper Braces, set, locates bumper

closer to body – plain170-1542 1936 Rear Bumper Braces, set, P/U170-1544 1937 Front Bumper Braces, set, Pass.170-1546 1937 Rear Bumper Braces, set, Pass.170-1548 1937 Rear Bumper Braces, set, P/U170-1550 1938-39 Front Bumper Braces, set, Pass. (Standard Only)170-1552 1938-39 Rear Bumper Braces, set, Pass.170-1554 1938-40 Rear Bumper Braces, set, P/U170-1555 1939 Front Bumper Braces (Deluxe Only)170-1556 1939 Rear Bumper Braces (Deluxe Only)170-1560 1940 Front Bumper Braces, set, Pass. and P/U170-1562 1940 Rear Bumper Braces, set, Pass. Car

BUMPER BRACES FOR FORD

170-1520

Page 34

MasterCard®

5800 NORTH ROTHWELL RD. • BOX 352 • STILLMAN VALLEY, IL 61084 • 1-815-645-2271 • 1-800-344-1934 • FAX: 1-815-645-2740CALL FOR CURRENT PRICING

MasterCard®


BUMPER BRACES FOR FORDPOLISHED STAINLESS

POLISHED STAINLESS

Part No. Year170-1520-SS-SR 1932 Front Bumper Braces, set, Pass. and P/U

170-1522-SS-SR 1932 Rear Bumper Braces, set, Pass

170-1523-SS-SR 1932 “SNUG” Rear Bumper Braces, SetLocates Bumper Closer to Body

170-1524-SS-SR 1933 Front Bumper Braces, set, Pass. and P/U

170-1527-SS-SR 1933 "SNUG" Rear Bumper Braces, set, locates bumpercloser to body


170-1533-SS-SR 1934 "SNUG" Rear Bumper Braces, set, locates bumpercloser to body


170-1538-SS-SR 1936 Front Bumper Braces, set, Pass and P/U

170-1541-SS-SR 1935-36 "SNUG" Rear Bumper Braces, set, locates bumpercloser to body

170-1544-SS-SR 1937 Front Bumper Braces, set, Pass

170-1546-SS-SR 1937 Rear Bumper Braces, set, Pass

170-1560-SS-SR 1940 Front Bumper Braces, set, Pass and P/U

170-1562-SS-SR 1940 Rear Bumper Braces, set, Pass. Car

1932-36 Rears are shortened to bring the bumper closer to the body.

SNUG170-1533-SS-SR

Rock Valley Has Other S/S Ford Braces in Process - CALL


BUMPER BRACES FOR CHEVROLET

Part No. Year470-1510 1931-33 Front Bumper Brace

470-1515 1931-32 Rear 2 pc. Bumperette Style—4 pc. Brace Set

470-1525 1931-32 Rear Full Length—Bumper Brace

470-1522-SR 1934-35 Standard Front Bumper Brace, pair,Plain, locates bumper closer to body

470-1522-SS-SR 1934-35 Standard Front Bumper Brace, pair,Polished Stainless, locates bumper closer to body

470-1526-SR R.V.A. Special Rear Bumper Brace, pair,Plain, locates bumper closer to body

470-1526-SS-SR R.V.A. Special Rear Bumper Brace, pair,Polished Stainless, locates bumper closer to body

These must be used with our part 470-1045-SS-SR & 470-1045-CH-SR "R.V.A.Special rear bumper." Fits 1933-34 all, and 1935 standard rear. This specialbumper is straight which eliminates the spare tire hump. This works for cars notusing a rear mounted spare, and brings the bumper closer to the body.

470-1510

470-1522-SR

470-1526-SR

Page 36

MasterCard®



MasterCard®


BUMPER BRACES FOR CHEVROLET

Part No. Year

470-1528 1937 Master Front Bumper Brace—Complete Set470-1528-PU 1937 Pickup 1/2 & 3/4 Ton Front Bumper Brace Set

470-1529 1937 Master Rear-Bumper Brace—Complete Set470-1529-PU 1937 Pickup 1/2 & 3/4 Ton Rear Bumper Brace Set

470-1530 1938-39 Front Bumper Brace—Complete Set470-1530-PU 1938-39 Pickup 1/2 & 3/4 Ton Front Bumper Brace Set

470-1535 1938-39 Rear Bumper Brace—Complete Set470-1535-PU 1938-39 Pickup 1/2 & 3/4 Ton Rear Bumper Brace Set

470-1540 1940 Front Bumper Brace—Complete Set470-1540-PU 1940 Pickup 1/2 & 3/4 Ton Front Bumper Brace Set

470-1545 1940 Rear Bumper Brace—Complete Set470-1545-PU 1940 Pickup 1/2 & 3/4 Ton Rear Bumper Brace Set

470-1550-PU 1941-46 Pickup 1/2 & 3/4 Ton Front Bumper Brace Set

470-1555-PU 1941-46 Pickup 1/2 & 3/4 Ton Rear Bumper Brace Set

470-1558-PU 1947-55 Pickup 1/2 & 3/4 Ton Front Brace

470-1558-PU 1945-55 Pickup 1/2 Ton Front Bumper Brace Set

470-1560-PU 1947-55 Pickup 1/2 Ton Rear Bumper Brace Set

470-1566-PU 1947-55 Pickup Ton Bumper Brace Set

470-1530


Part No. Year470-1610-SR 1934-36 Front Bumper Brace to Frame Bolt Hole Cover,

Polished S/S, 1934-35 pass. front - 1934-36 P/U front

470-1610-SR

SAMPLE OF THE BRACES

Page 38

MasterCard®


470-1528-PU

470-1530-PU

470-1535-PU

470-1540-PU

470-1545-PU

470-1555-PU

470-1555-PU

470-1560-PU 470-1566-PU

470-1529-PU



MasterCard®

Page 39

Part No. Year170-1430-SS 1933-40 Bumper Bolts—S/S—Polished Head

BUMPER BOLTS FOR CHEVROLET

470-1410 1931-35 Bumper End Bolts—S/S, Includes Nuts-Washers

470-1420 1931-35 Bumper Center bolt—S/S, Includes Nuts-Washers

470-1430 1936-40 Bumper Bolt—S/S, Includes Nuts-Washers

470-1475 1941-54 Bumper Bolt—Chrome, Pass & Pu.470-1310 1931-35 Bumper End Bolt—Nylon Spacer and Washer Kit

BUMPER GUARDS FOR FORD

170-2225 1936 Bumper Guards—Chrome

170-2240 1940 Bumper Guards—Chrome

NOTE: 1936 Bumper Guards can be used on 1935 Fords.

BUMPER BOLTS FOR FORD


STEEL DASH FOR 1928-31 FORD

Part No. Year154-1010 1928-29 Coupe , Two Door, and Pickup Dash Assembly.

This replaces original dash rail. The upperhalf resembles the original. The lower half lookssimilar to a 32 Ford dash, with plenty of roomfor gauges, air ducts, radio and etc. Originalgas tank cannot be used for fuel, must be altered.

154-1020 1930-31 Coupe , Two Door, and Pickup Dash Assembly.This replaces original dash rail. The upperhalf resembles the original. The lower half lookssimilar to a 32 Ford dash, with plenty of roomfor gauges, air ducts, radio and etc. Originalgas tank must be altered.

U.S. MADE CORRECT SIZEHINGE PINS—STAINLESS—POLISHED HEADS

FOR FORD

Part No. Year164-1550-SR 1928-31 Hinge Pins

164-1560-SR 1932-48 Hinge Pins

154-1020

164-1560-SR164-1550-SR

Page 40

MasterCard®



MasterCard®


Page 41

Part No. Year

139-4510-SR 1928-34 Fender to Fender Brace Bolt—Polished—Stainless

139-1550 1933-34 Support Brace, 2 Required per car

139-1555 1935-38 Pass., and 39 Std.Pass. —Support Brace— LH

139-1556 1935-38 Pass., and 39 Std.Pass.—Support Brace— RH

139-4510-SR

139-1550 139-1555 139-1556

FRONT FENDER SUPPORT BRACES & BRACE BOLT FOR FORD


TAILLIGHT REFLECTORBrighten Up Your Taillights

Part No. Year134-4090-SR 1938-40 Taillight Reflector—Polished Stainless Steel.

Ford This will brighten up dim lights.

1937-38 Chevrolet—Taillight ReflectorPart No. Year434-4090-SR 1937-38 Passenger, 40-54 Pickup

Chevrolet

Page 42

MasterCard®



MasterCard®


Page 43

Part No. Year109-6210 1928-34 Front Spring Poly 1 3/4" Black109-6220 1928-40 Rear Spring Poly 2 1/4" Black109-6230 1935-40 Front Spring Poly 2" Black

1948-52 FORD PICKUP RUNNING BOARDS

141-1060 1948-52 Pickup Running Board—Stamped Steel141-1062 1948-52 Pickup Running Board—Stamped Steel "Smooth"141-1064 1953-56 Pickup Running Board141-1066 1953-56 Picup Running Board — Smooth

1947-54 CHEVROLET PICKUP RUNNING BOARD441-1065 1947-54 Pickup Running Board—Stamped Steel

and First Series 1955 Chevrolet

441-1067 1947-54 Pickup Running Board—Stamped Steel "Smooth"and First Series 1955 Chevrolet

Also Fits Suburban and Panel Truck


MasterCard®


HOOD HINGE RODS FOR FORD

Part No. Year130-3410 1928-29 Hood Hinge Rods—Stainless Steel 3 pc. Set

130-3420 1930-31 Hood Hinge Rods—Stainless Steel 3 pc. Set

130-3430 1932 Hood Hinge Rods—Stainless Steel 2 pc. Set

130-3440 1933-34 Hood Hinge Rods—Stainless Steel 2 pc. Set



RADIATOR SUPPORT RODS FOR FORD124-4510 1928-31 Radiator Support Rods—Plain

124-4510-SS 1928-31 Radiator Support Rods—Stainless

124-4530-SS 1932-36 Radiator Support Rods—Stainless

170-1830-PS 1928-31 Polished Stainless Rear Spreader

130-3430

170-1830-PS


Part No. Year59A-8196-SS 1946-48 Mercury Stainless Steel Lower Grilles,

Top Quality U.S.A. Made. Sold in Pairs

FOR MERCURY

MasterCard

Page 45

®



6"

6"

8"

8"

5"

8"

CAMLATCH

149-3238

149-3025

149-3236

MasterCard

Page 46

®


149-3025-LA 5x8 Floor Access Door - S/S, for Easy Access to Master CylinderW/Cam Latch

149-3025-PS 5x8 Polished, W/Cam Latch

149-3236-LA 6x6 Floor Access Door - S/S, for Gas Tank Sender, or Hidden Gas CapW/Cam Latch


149-3238-LA 8x8 Floor Access Door, S/S, for Accessing T.P.I. Pump at Fuel TankW/Cam Latch


149-3256-LA 11x15 CD/Changer, Battery, 6 pack

149-3256-PS 11x15 CD/Changer, Battery, 6 pack


MasterCard

Page 47

®


FORD BUG SCREENSPart No. Year128-6010 Bug Screen Mounting Springs128-6060 1932 Bug Screen128-6062 1933-34 Bug Screen128-6063 1934 Bug Screen, Pickup128-6064 1935 Bug Screen128-6068 1936 Bug Screen128-6069 1936 Bug Screen, Pickup128-6070 1937 Bug Screen128-6072 1940 Std.—Bug Screen128-6074 1940 Dlx.—Bug Screen

CHEVROLET BUG SCREENS

428-6058 1932 Bug Screen428-6060 1933 Bug Screen428-6062 1934 Std.—Bug Screen428-6063 1934 Master—Bug Screen428-6064 1935 Std. Bug Screen428-6066 1936 Bug Screen428-6068 1937 Bug Screen428-6070 1938 Bug Screen428-6072 1939 Bug Screen428-6074 1940 Bug Screen428-6076 1941 Bug ScreenNOTE: Springs are included with all bug screens when ordered.

Custom Screens Available

128-6062

128-6010


MasterCard

SUBTOTAL

SALES TAX

INSURANCE POSTAGE & HANDLING

C.O.D. $6.00

GRAND TOTAL

Cu

t alo

ng

this lin

e.

5800 NORTH ROTHWELL RD. • BOX 352 • STILLMAN VALLEY, IL 61084

Out of State 1-800-344-1934 Illinois Resident 815-645-2271Telefax 815-645-2740

YEAR MAKE & MODEL STD DLX STREET ROD ORDER DATE ORDERED BY

SALES PERSON CUSTOMER P.O. SHIPPED DATE SHIPPED VIA PACKAGES PACKAGED BY

BUYERS MAILING OR BILLING ADDRESS

NAME

ADDRESS

CITY STATE

ZIP PHONE

QTY PART NUMBER DESCRIPTION UNIT AMOUNTPRICE

®

CHECK ONECOPY YOUR CHARGE CARD NUMBER

EXPIRATION DATE

SHIPPING ADDRESS (If different)

NAME

ADDRESS

CITY STATE

ZIP PHONE

MasterCard®

MasterCard

Page 4

®


ALSO AVAILABLE .

• COMPLETE LINE OF 1928-48FORD REPRODUCTION PARTS

• STREET ROD PARTS

• CHASSIS AND BODIES

• ANTIQUE AUTOS - FOR SALE

• STREET ROD AUTOS - FOR SALE

FOR AVAILABILITY AND PRICE QUOTES

815-645-2271815-645-2101

ALSO AVAILABLE

print 2004 catalog-43 - rock valley antique auto parts

Documents