principle of touchscreen1
TRANSCRIPT
![Page 1: Principle of touchscreen1](https://reader031.vdocuments.us/reader031/viewer/2022032216/55a5d6de1a28abed548b457a/html5/thumbnails/1.jpg)
PRINCIPLE OF TOUCHSCREEN
Arsh Hashmi
Anuj Sharma
Gaurav Bhandari
Deepak Thakur
![Page 2: Principle of touchscreen1](https://reader031.vdocuments.us/reader031/viewer/2022032216/55a5d6de1a28abed548b457a/html5/thumbnails/2.jpg)
INTRODUCTION
A touch screen is a two dimensional sensing device display that can detect the presence and location of a touch within the display area.
The term generally refers to touching the display of a device with a finger or hand .
Touchscreen can also scan other passive object such as stylus.
Touchscreen are common in devices such as game consoles, all-in-one computers, tablets computers and smart phones.
![Page 3: Principle of touchscreen1](https://reader031.vdocuments.us/reader031/viewer/2022032216/55a5d6de1a28abed548b457a/html5/thumbnails/3.jpg)
The objective of our report titled ‘Principle
of Touchscreen’ is to explain the principles
involved in the working of this technology.
Among the various types of touchscreen
technologies, our main focus will be on the
Resistive And Capacitive touchscreen
![Page 4: Principle of touchscreen1](https://reader031.vdocuments.us/reader031/viewer/2022032216/55a5d6de1a28abed548b457a/html5/thumbnails/4.jpg)
HOW DOES A TOUCHSCREEN WORK?
A basic touchscreen has three main components:
TOUCH SENSOR: It is a clear glass panel with a touch responsive surface. The touch sensor/panel is placed over a display screen so that the responsive area of the panel cover the viewable area of the screen. There are several different touch sensor technologies in the market today, each using different method to detect touch input. The sensor generally has an electrical current or signal going through it and touching the screen causes a voltage or signal change. This change is used to determine the location of the touch to the screen.
![Page 5: Principle of touchscreen1](https://reader031.vdocuments.us/reader031/viewer/2022032216/55a5d6de1a28abed548b457a/html5/thumbnails/5.jpg)
![Page 6: Principle of touchscreen1](https://reader031.vdocuments.us/reader031/viewer/2022032216/55a5d6de1a28abed548b457a/html5/thumbnails/6.jpg)
CONTROLLER: The controller is a small
PC card that connects between the touch
sensor and the PC. It takes information
from the touch sensor and translates it into
information that PC can understand. The
controller is usually installed inside the
monitor for integrated monitors or it is
housed in a plastic for external touch add-
ons / overlays.
![Page 7: Principle of touchscreen1](https://reader031.vdocuments.us/reader031/viewer/2022032216/55a5d6de1a28abed548b457a/html5/thumbnails/7.jpg)
![Page 8: Principle of touchscreen1](https://reader031.vdocuments.us/reader031/viewer/2022032216/55a5d6de1a28abed548b457a/html5/thumbnails/8.jpg)
SOFTWARE DRIVER-The driver is a
software update for the system that allows
the touch screen and system to work
together. It tells the operating system how
to interpret the touch event information
that is sent from the controller.
![Page 9: Principle of touchscreen1](https://reader031.vdocuments.us/reader031/viewer/2022032216/55a5d6de1a28abed548b457a/html5/thumbnails/9.jpg)
TYPES OF TOUCH SCREEN TECHNOLOGY
Resistive touchscreen
Capacitive touchscreen
Infrared touchscreen
Surface Acoustic Wave (SAW) touchscreen
Strain gauge touchscreen
Optical imaging touchscreen
Dispersive signal technology touchscreen
![Page 10: Principle of touchscreen1](https://reader031.vdocuments.us/reader031/viewer/2022032216/55a5d6de1a28abed548b457a/html5/thumbnails/10.jpg)
RESISTIVE TOUCHSCREEN
Resistive touchscreen systems are the most
common type of touchscreen technology in
today’s market. These devices are used in
many applications, such as cell phones,
handheld games, GPS navigation devices, and
even some digital camera.
![Page 11: Principle of touchscreen1](https://reader031.vdocuments.us/reader031/viewer/2022032216/55a5d6de1a28abed548b457a/html5/thumbnails/11.jpg)
TYPES OF RESISTIVE TOUCHSCREEN
4-wire resistive touchscreen
5-wire resistive touchscreen
6-wire resistive touchscreen
7-wire resistive touchscreen
8-wire resistive touchscreen
![Page 12: Principle of touchscreen1](https://reader031.vdocuments.us/reader031/viewer/2022032216/55a5d6de1a28abed548b457a/html5/thumbnails/12.jpg)
4-WIRE RESISTIVE TOUCHSCREEN
THE STRUCTURE OF TOUCHSCREEN
The 4 wire resistive touchscreen uses a glass panel with a uniform conductive ITO(indium tin oxide) coating on the one-side surface.
A PET film is tightly suspended over the ITO coating surface of a glass panel.
The glass substrate and the PET film are separated by tiny, transparent insulating dot spacers.
The PET films has a hard coating on the outer side and a conductive ITO coating on the inner side. The structure is film-glass process.
![Page 13: Principle of touchscreen1](https://reader031.vdocuments.us/reader031/viewer/2022032216/55a5d6de1a28abed548b457a/html5/thumbnails/13.jpg)
![Page 14: Principle of touchscreen1](https://reader031.vdocuments.us/reader031/viewer/2022032216/55a5d6de1a28abed548b457a/html5/thumbnails/14.jpg)
WORKING PRINCIPLE
1. When the screen is touched, it pushes the
conductive ITO coating on the glass. That
results the electrical contact, producing the
voltages. It presents the position touched.
2. The pins (X left) and (X right ) are on the
glass panel, and the pins (Y up) and (Y
down) are the PET film.
![Page 15: Principle of touchscreen1](https://reader031.vdocuments.us/reader031/viewer/2022032216/55a5d6de1a28abed548b457a/html5/thumbnails/15.jpg)
3. The microprocessor applies +5V to pin (X left)
on the glass panel, and the voltage is uniformly
decreasing to pin (X right) for 0V because of the
resistive ITO coating on the glass substrate, and
the PET film is grounded. When the touchscreen
is not touched, the controller detects the voltage
on the PET film is 0.The next electric cycle, the
microprocessor applies +5V to pin(Y up) on the
PET film, and the voltage is uniformly
decreasing to pin (Y down) for )V. When the
touchscreen is not touched, the controller
detects the voltage on the glass panel is 0
![Page 16: Principle of touchscreen1](https://reader031.vdocuments.us/reader031/viewer/2022032216/55a5d6de1a28abed548b457a/html5/thumbnails/16.jpg)
4. When the touchscreen is touched, a
voltage on the glass substrate proportional
to the X (horizontal) position of the touch
appears on the PET film. This voltage is
digitized by the A/D converter and
subjected to an averaging algorithm. Then
it is stored and transferred to the host.
Hence, the X position is produced.
![Page 17: Principle of touchscreen1](https://reader031.vdocuments.us/reader031/viewer/2022032216/55a5d6de1a28abed548b457a/html5/thumbnails/17.jpg)
The next electric cycle, a voltage on the
PET film proportional to the Y(vertical)
position of the touch appears on the glass
substrate. This voltage is digitized by the
A/D converter and subjected to an
averaging algorithm. Then it is stored and
transferred to the host. Hence, the Y
position is produced.
![Page 18: Principle of touchscreen1](https://reader031.vdocuments.us/reader031/viewer/2022032216/55a5d6de1a28abed548b457a/html5/thumbnails/18.jpg)
![Page 19: Principle of touchscreen1](https://reader031.vdocuments.us/reader031/viewer/2022032216/55a5d6de1a28abed548b457a/html5/thumbnails/19.jpg)
ADVANTAGES:
1.Cost effective and durable.
2.Can work in all climatic condition.
3.Less sensitive to scratches as compared
to capacitive screens.
DISADVANTAGES:
1.Normally does not support multi touch.
2.While using finger, slightly more pressure
needs to be applied.
3.Clarity is lower than capacitive screen.
![Page 20: Principle of touchscreen1](https://reader031.vdocuments.us/reader031/viewer/2022032216/55a5d6de1a28abed548b457a/html5/thumbnails/20.jpg)
CAPACITIVE TOUCHSCREENS
They represent the second most widely used
sensing method after resistive film touch
panels.
There are two types of capacitive touch
screen:
1.Surface Capacitive Touch screen
2.Projected Capacitive Touch screen
![Page 21: Principle of touchscreen1](https://reader031.vdocuments.us/reader031/viewer/2022032216/55a5d6de1a28abed548b457a/html5/thumbnails/21.jpg)
SURFACE CAPACITIVE TOUCH SCREENN
STRUCTURE-Capacitive touch screen is a
four multi-layer glass. The two sides of the
glass substrate are coated with uniform
conductive ITO(indium tin oxide) coating.
The thickness of 0.0015mm silicon dioxide
hard coating are coated on the front side of
ITO coating layer. There are electrodes on
the four corners for launching electric
current.
![Page 22: Principle of touchscreen1](https://reader031.vdocuments.us/reader031/viewer/2022032216/55a5d6de1a28abed548b457a/html5/thumbnails/22.jpg)
![Page 23: Principle of touchscreen1](https://reader031.vdocuments.us/reader031/viewer/2022032216/55a5d6de1a28abed548b457a/html5/thumbnails/23.jpg)
WORKING PRINCIPLE
Small amount of voltage is applied to the electrodes on the four corners.A human body is an electric conductor, so when you touch the screen with your finger, a slight amount of charge is drawn, creating a voltage drop.
The current respectively drifts to the electrodes on the four corners. Theoretically, the amount of current that drifts through the four electrodes should be proportional to the distance from the touch point to the four corners.
The controller precisely calculates the proportion of the current passed through the four electrodes and figures out the X/Y coordinate of a touch point.
![Page 24: Principle of touchscreen1](https://reader031.vdocuments.us/reader031/viewer/2022032216/55a5d6de1a28abed548b457a/html5/thumbnails/24.jpg)
![Page 25: Principle of touchscreen1](https://reader031.vdocuments.us/reader031/viewer/2022032216/55a5d6de1a28abed548b457a/html5/thumbnails/25.jpg)
PROJECTED CAPACITIVE TOUCH SCREEN
STRUCTURE-They are made up of three major components; the sensor glass, the cover glass , and a flexible printed(FPC) with controller. The sensor glass is made of a series of electrodes that are configured into rows and columns. These electrodes are made up of a transparent conductive coating called indium tin oxide. Each electrode is routed with a metal to a connection point where the FPC can be bonded. The FPC generally contains the controller for the touch sensor.
![Page 26: Principle of touchscreen1](https://reader031.vdocuments.us/reader031/viewer/2022032216/55a5d6de1a28abed548b457a/html5/thumbnails/26.jpg)
The cover glass is optically bonded on top of
the sensor glass, burying the electrodes
within the stack of the lamination. The cover
glass serves as a dielectric between your
touch and the electrodes of the sensor
glass. It also doubles as a barrier layer
protecting the sensitive electrodes from the
environment and any potential damage.
![Page 27: Principle of touchscreen1](https://reader031.vdocuments.us/reader031/viewer/2022032216/55a5d6de1a28abed548b457a/html5/thumbnails/27.jpg)
![Page 28: Principle of touchscreen1](https://reader031.vdocuments.us/reader031/viewer/2022032216/55a5d6de1a28abed548b457a/html5/thumbnails/28.jpg)
WORKING PRINCIPLE
Projected capacitive touch screes are made up of a matrix of rows and columns of conductive material, layered on sheets of glass. This can be done by either etching a single conductive layer to form a grid pattern of electrodes, or by etching two separates, perpendicular layers of conductive material with parallel lines or tracks to form a grid. Voltage applied to this grid creates a uniform electrostatic field, which can be measured When a conductive object, such as finger comes into contact with PCT panel, it distorts the local electrostatic field at that point . This is measurable as change in capacitance. Hence the X and Y coordinates can be determined.
![Page 29: Principle of touchscreen1](https://reader031.vdocuments.us/reader031/viewer/2022032216/55a5d6de1a28abed548b457a/html5/thumbnails/29.jpg)
![Page 30: Principle of touchscreen1](https://reader031.vdocuments.us/reader031/viewer/2022032216/55a5d6de1a28abed548b457a/html5/thumbnails/30.jpg)
ADVANTAGES:
1.Hgh clarity display (up to 90% optical
transparency)
2.Supports multi-touch
3.High touch resolution
4.High sensitivity
DISADVANTAGES:
1.Needs a human finger to register input. It
is not possible to use this screen wearing
gloves
2.Cannot be used in all weather scenarios.