Pricing - PowderFX

http://www.powderfx.ca/pricing[22/03/2015 04:19:21 p.m.]

Follow Us

Home Contact Photos FAQ Pricing About

PricingPowder FX Custom pricing

Powder FX Custom Coatings is your local custom powder coating shop. Each order is unique and different from one another; therefore a set standard price list is not available. However, we offer estimates on a "per order" basis. Estimates can only be finalized after an inspection of each part/order to verify and determine the condition of what is to be powder coated and the preparation and labor required to achieve the desired outcome.

At Powder FX Custom Coatings, we offer free pickup and delivery in the Winnipeg area. We can come out to evaluate your parts to give you a more accurate estimate.

Initial prep work is the most labor intensive. Having your parts stripped of all surface coatings, removing all plastic tabs and rubber grommets, etc, and having your part(s) cleaned, will ultimately help keep the overall price down. Anything that cannot handle temperatures of up to 400oF for an extended period of time should also be removed.

Some starting prices (see terms below):

Keep In Mind:

All prices are subject to change due to abrasive blasting time, masking of all threads, preparation, and powder coating using a stock color.Cast aluminum and magnesium parts may experience an out-gassing and/or bubbling in the finished powder coat. We will take every precaution to avoid out-gassing; however, we can't be held responsible for bubbling caused by porous castings.For a second coat add 50% for a clear coat. Clear coat is required over all metal and silver coating.

Automotive Price ListItem Cost Item Cost

A-Arm (Upper/Lower) 50.00 Intake Manifold (no heat riser) Air Cleaner Covers (2 piece) Typical V6 or V8 80.00

Small 40.00 Tuned Port Injection 180.00

Medium 50.00 Master Cylinders Large 60.00 Brake 35.00

Alternator Housings 45.00 Clutch 35.00Axel (Housing Only) 155.00 Nerf Bars for Pickup/Jeep 105.00Bolt Heads Oil Pan 45.00Small 3/8 & Under 1.00 Pulleys 20.00Large 1/2 & Up 2.00 Power Steering Box 65.00

Battery Box Radiator Core Supports Small 23.00 Typical Passenger 75.00

Large 30.00 Large Passenger/Truck 115.00

Brakes Rad Hold-down 25.00

Disc. Rotor (Non-drilled) 65.00 Rear-end 155.00

Disc. Rotor (Drilled) 95.00 Roll Bars Disc. Back Plate 25.00 2-Point 55.00Disc. Calliper 55.00 2-7 Point 155.00Brake Drum 55.00 2" Tube x 16' 60.00Brake Drum Back Plate 40.00 Spindles (Masked Races) 35.00Brackets Springs Small 5.00 Coil ($/each) 40.00Medium 15.00 Leaf incl. clamp & bolt ($/e) 80.00Large 20.00 Stabilizer Bumpers Sway Bars 35.00Standard 105.00 Pan hard Bar 35.00

Pricing - PowderFX

http://www.powderfx.ca/pricing[22/03/2015 04:19:21 p.m.]

Brush Guard Bumper 150.00 Thermostat Housing 20.00

Truck Bumper 150.00 Third Member 80.00

Chassis Tie Rods (Mask Threads) 30.00Small Passenger/Street Rod 355.00 Timing Cover 30.00

Typical Pass./Street Rod 405.00 Transmission Housing

Large Passenger/Truck 455.00 Automatic 205.00

Sub frame 180.00

Cylinder Block V8 505.00 Manual 105.00

Cylinder Block V6 405.00 Transmission Pan 25.00 Trailer Hitch 80.00Cylinder Heads V6 & V8 ($/ea.) 255.00 U-Bolts ($/each) 20.00

Cylinder Heads Straight V6 305.00 Valve Covers (Plain)

Drive Shafts 50.00 6-cylinder ($/each) 50.00Fan 35.00 V8 ($/pair) 65.00

Fan Shroud 35.00 Water Pump 35.00

Fender Wells (Inner Panels) Wheels Typical ($/each) 45.00 Standard Steel 15" 50.00Large ($/each) 65.00 Cast Aluminum 14" - 20" 65.00

Undercoating removal extra +25% Cast Magnesium 16" 130.00

Half Shaft 40.00 Wire Wheels 105.00Headlight Bucket 23.00 Knock Offs 55.00Headlight Ring 20.00 Wheels PC - Centers Only 125.00Hood Hinge (Typical & Dom.) 35.00 Wheel Centers Only (3 pc.) 30.00Idler Arms 20.00 Lug Nut ($/each) 2.00Jack Stands 25.00 Windshield Wiper Arms 25.00

License plate frame 15.00

Motorcycle & ATV Price List

Keep In Mind:All prices are subject to change due to abrasive blasting time, masking of all threads, preparation, and powder coating using a stock color.Cast aluminum and magnesium parts may experience an out-gassing and/or bubbling in the finished powder coat. We will take every precaution to avoid out-gassing; however, we can't be held responsible for bubbling caused by porous castings.For a second coat add 50% for a clear coat. Clear coat is required over all metal and silver coating.

Item Cost Item Cost

Air Cleaners Handle Bar Riser 30.00Front 30.00 Headlight Rim 20.00Back 25.00 Headlight Shell 25.00Battery Headlight Shroud - FL 40.00Base Plate 25.00 Horn Cover 20.00Box 25.00 Hubs ($/each) 30.00Strap 15.00 Inspection Covers 16.00Top Plate 15.00 Kick Stand & Hardware (Side) 40.00Brackets Kick Stand (Center) 35.00Small 5.00 Lifter Blocks ($/set) 50.00Large 20.00 Master Cylinder 40.00Brakes Master Cylinder Cover 15.00Arm 19.00 Manifold 35.00Rod 19.00 Oil Pump Cover 23.00Callipers 50.00 Oil Pump Housing 50.00Clutch Rod 23.00 USED Wrap Around 80.00Engines Push Rod Tubes ($/each) 20.00Cases - Pair 185.00 Rocker Box Covers Cylinder Barrels ($/each) 45.00 Shovel-Sportster ($/set) 55.00Cylinder Heads ($/each) 80.00 Evolution Set (6 pieces) 145.00Engine Skid Plate 31.00 Shifters 19.00Foot Pegs 20.00 Sissy Bars 35.00Fork Legs (front/lower) ($/set) 100.00 Shock Springs 30.00

Pricing - PowderFX

http://www.powderfx.ca/pricing[22/03/2015 04:19:21 p.m.]

Frames Transmission All Harley Davidson 200.00 Case 55.00ATV (3 Wheeler) 170.00 Top Cover 30.00Control Arm ($/ea.) 25.00 End Cover 25.00Dirt Bike 200.00 Plate 27.00Quad (4 Wheeler) 200.00 Release Lever 15.00Handle Bars 45.00 Dirt Bike 45.00Handle Bar Clamps (2 piece) 17.00 Dirt Bike (Hubs) 35.00

Racing Parts Price List

Keep In Mind:All prices are subject to change due to abrasive blasting time, masking of all threads, preparation, and powder coating using a stock color.Cast aluminum and magnesium parts may experience an out-gassing and/or bubbling in the finished powder coat. We will take every precaution to avoid out-gassing, however, we can't be held responsible for bubbling caused by porous castings.For a second coat add 50% for a clear coat. Clear coat is required over all metal and silver coating.

Item Cost Item Cost

Arm, Control Frames cont. Tubular 40.00 Kart 205.00

Cam 35.00 Fuel Tank (22-32 gallons) 85.00

Valve - Alum. 4 cylinder 35.00 Housing, Rear Axle (No Gears) 155.00Valve - Alum. 6 cylinder 50.00 Housing, Third Member 80.00Valve - Alum. 8 cylinder 50.00 Manifold Intake 8 Cylinder 85.00Valve - Steel 4 cylinder 35.00 Mod. Car - Front or Rear Bumper 40.00Valve - Steel 6 cylinder 50.00 Mod. Car - Quarter Nerf Bars 30.00Valve - Steel 8 cylinder 50.00 Oil Pan (Alloy) 55.00Cylinder Block V8 230.00 Pulley, 2 & 3 Belt (5" Diam. Stl) 25.00Cylinder Block V6 155.00 Pulley, 4" - 6" Diameter 20.00Drum, Brake (Automatic) 55.00 Shaft, Steering Column (48"L) 50.00End Plates 30.00 Spindle, Front 40.00Fan Spring, Coil (Auto) 35.001 piece 35.00 Spring, Leaf 45.002 piece 45.00 Sprint Cars

Patio Furniture, Bicycles, Lawn Mowers, & Misc.Price List

Keep In Mind:All prices are subject to change due to abrasive blasting time, masking of all threads, preparation, and powder coating using a stock color.Cast aluminum and magnesium parts may experience an out-gassing and/or bubbling in the finished powder coat. We will take every precaution to avoid out-gassing; however, we can't be held responsible for bubbling caused by porous castings.For a second coat add 50% for a clear coat. Clear coat is required over all metal and silver coating.

Item Cost Item CostBicycles Bicycle seats 15.00Small 75.00 Wagon Small (Bed only) 15.00Medium 105.00 Wagon Medium (Bed only) 20.00Large 115.00 Wagon Large (Bed only) 25.00Tricycles Wagon Running Gear 25.00Small 35.00 Wheels Medium 45.00 4" Diameter 8.00Large 55.00 6" Diameter 15.00Lawn Mowers, Push (Belly Mt.) 40.00 8" Diameter 17.00Lawn Mowers, Drag Behind (Deck) 85.00 10" Diameter 19.00Snow Blades 12" Diameter 21.00Mower 85.00 Bicycle 17.00Light Truck (6 1/2' to 8') 305.00 ATV 20.00Trailer Hitches 45.00 Yard Ornaments 5. - 25.

Pricing - PowderFX

http://www.powderfx.ca/pricing[22/03/2015 04:19:21 p.m.]

Railing, Aluminum $8./ft. Bed Frames: Hand Rails, Steel $4./ft. (Includes Head & Foot & Side) Hand Rails, Aluminum $5./ft. Single (Twin) 55.00Bicycle Fork 25.00 Double (Full) 65.00

Patio Furniture Price List

Item Steel & Aluminum Cast/Wrought IronRound Table (40" Diameter) 80.00 104.00Rectangle (25" x 35") 55.00 75.00Tee Cart Small 70.00 90.00Tee Cart Large 95.00 115.00Side Chair 55.00 70.00Arm Chair 60.00 80.00Low Rocker 65.00 85.00High-Back Spin Base 70.00 95.00High-Back Rocker 75.00 100.00Glider (Two person) 110.00 120.00Sun Bench 95.00 115.00Contour Chaise 95.00 110.00Adjustable Chaise 110.00 125.00Love-Seat (Two person) 95.00 115.00Stacking Stools ($/each) 45.00 55.00Ottoman 50.00 55.00Bar Stool 70.00 80.00Lei-Around/Couch 210.00 250.00Sun Shield (Frame) 160.00 185.00

**Leaf Springs

The above prices are baseline starting prices. Actual prices will vary according to part conditions. All Metallic, Clear Coats or Candies are 50% higher in price due to the process of requiring two coats. For more accurate pricing or to inquire on items not listed above, please contact us directly at: 204-451-2744

Terms and Conditions:

Prices are based on all parts being bare metal, stripped of any coating and having any part(s) removed that cannot withstand temperatures of over 400 degrees for an extended period of time.

Prices are based on single coat color applications. Additional coats are an additional 50% in price.

Metallic and chrome colors require a top clear coat. Candy colors require a chrome base coat. These applications are an additional 50% above price listed.

Parts requiring above average preparation time will be charged an additional $50 per hour.

Parts that are badly rusted or have several coatings that take longer to be removed by our chemical stripping will be sent to our commercial blaster prior to our preparation. In these situations, the sandblasting cost will be charged directly to you with no mark up by Powder fx Custom Coatings

We do not disassemble or assemble any parts. This is the sole responsibility of the customer.

©2015 PowderFX | Designed by Hurricane Media