priced schedule for items and quantities for the work … · s. no. description of item unit total...

S.

No.

Description of Item Unit Total Qty Rate Amount

1 2 3 30 31 34

UNIQ No. BLDG. No.

SECTION 1 BUILDING WORKS : (A)-EARTH WORK, ANTITERMITE TREATMENTS

1.00 Surface Dressing of the ground in any kind of soil including removing vegetation inequalities not exceeding 15 cm depth and disposal of the rubbish within a lead upto 75 m as

directed. Sqm 42890.00 10 428900.00

2.00 Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the

spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required

complete.

2.01 Depth of excavation not exceeding 1,500 mm. % Cum 578.22 11927 6896430.00

2.02 Depth of excavation for additional depth beyond 1,500 mm. and upto 3,000 mm. but not requiring shoring. % Cum 50.95 19238 980176.00

3.00 Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be

made on the basis of measurement of finished quantity of work)

3.01 With earth obtained from excavation of foundation. % Cum 3094.20 7754 23992427.00

3.02 With earth obtained by fresh excavation (including cost of excavation upto 1,800 mm. depth) from land arranged by the Deptt. within a lead of 100 m. % Cum 4133.94 13718 56709389.00

4.00 (A) Filling in foundation or plinth by fine sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete

including the cost of supply of sand. (payment to be made on measurement of finished quantity)

Priced schedule for items and quantities for the work Construction of Biswa Bangala Biswabidyalaya at Bolpur, Birbhum, West Bengal

Combined Quantities

including the cost of supply of sand. (payment to be made on measurement of finished quantity)

(B) Do - by fine sand % Cum 23.93 48741 1166372.00

5.00 Earth work in filling in compound, tank, low land, ditches etc. with good earth, in layers not exceeding 150 mm. including breaking clods and consolidating the same by ramming

and dressing complete. (Payment will be made on profile measurement before and after the work)

5.01 (a) With earth obtained by fresh excavation upto 1800 mm. depth (including the cost of excavation from land arranged by the Deptt. within a lead of 100 m.) % Cum 35.00 17218 602630.00

5.02 (b) (i) With carried earth arranged by the contractor within a radius of 3 km. including cost of carried earth. % Cum 20.00 37982 759640.00

5.03 (ii) With carried earth arranged by the contractor within a radius exceeding 3 km. but not exceeding 5 km. including the cost of carried earth. % Cum 10.00 41958 419580.00

5.04 (iii) With carried earth arranged by the contractor within a radius exceeding 5 km. but not exceeding 10 km. including cost of carried earth. % Cum 535.14 51236 27418433.00

6.00 Hire and labour charges for shoring work (including necessary close plank walling, framing, Eucalyptus/Jhou bulla piling, strutting etc) complete as per direction of the Engineer-in-

charge for foundation excavation (vertical surface are in contact with supported earth is to be measured.) (This item should be executed on specific direction of the Enginner in

charge).

6.01 Depth upto 1.5 m. Sqm 350.00 376 131600.00

6.02 For additional depth beyond 1.5 m. and upto 3.00 m Sqm 450.00 429 193050.00

7.00 Bailing or pumping out water from foundation trenches.

This item should be executed on the specific direction of the Engineer-in-charges when he is satisfied in his absolute discretion, that this has not been necessitated due to any fault

on the part of the contractor

(Payment, if permitted, will be made on the quantity of water calculated on the basis of initial and final water calculated on the basis of initial and final water level measured before

starting and completion of each days work which necessitates a bailing / pumping of water from the trench. The final level of water to be measured, will depend on the level at

which the day's work will be taken up. The rate includes any seepage water that may percolate in the trench during pumping)100 Cum 20.00 2088 41760.00

A-BBB-For Tender)-16.04.2018 Page No-1

S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

8.00 Pre-Constructional Anti-termite measures:

8.01 Anti termite treatment to bottom surface ( in case of masonry foundation and basements) and the sides (upto a height of 300 mm. from bottom) of the excavation trenches with

chemical emulsion by admixing chloropyrofos emulsifiable concentrates (1% concentration) with water by weight at the rate of 5 Litres per sq. m. area. The work shall be carried

out as per specification described in 6.2.1. of code IS- 6313 (part -II) 1981. (Mode of measurment will be the plan area of foundation treated.)Sqm 1467.03 93 136434.00

8.02 Anti termite treatment to back filling of the masonry foundation with chemical emulsion by admixing chloropyrofos emulsifiable concentrates ( 1% concentration) with water by

weight at the rate of 7.5 Litres per sq. m. of the vertical surface of the substructure for each side of the foundation.. The work shall be carried out as per specification described in

6.2.2. of code IS-6313 (part -II) 1981. (Mode of measurment will be vertical area treated.)Sqm 30.00 130 3900.00

8.03 Anti termite treatment to the top surface of the consolidated earth within plinth walls with chemical emulsion by admixing chloropyrofos emulsifiable concentrates (1% concentration)

with water by weight at the rate of 5 Litres per sq. m. of the surface before sand bed or sub-grade is laid. Holes upto 50 mm. to 75 mm. deep at 150 mm. centre to centre both

ways shall be made with 12 mm, diameter mild steel rod on the surface to facilitate saturation of the soil with the chemical emulsion. The work shall be carried out as per

specification described in para 6.4 of code IS-6313 (part -II)1981. ( Mode of measurment will be per Sq.m of plan area of plinth treated.)Sqm 24528.97 110 2698187.00

8.04 Treatment to the back filling of R.C.C. foundation with chemical emulsion by admixing chloropyrofos emulsifiable concentrate (1% concentration) with water by weight at the rate of

7.5 ltr. per sq.m. of the vertical surface of the substructure of each side of the foundation. The work shall be carried out as per specification as described in para 6.3.1 of code IS-

6313 (part-II) 1981 (Mode of measurement will be per sq.m. of vertical area of foundation treated).Sqm 15034.00 137 2059658.00

SECTION 1 : BUILDING WORKS (B)-DISMANTLING, CUTTING CHASE, HOLES ETC.

9.00 Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m.

In ground floor including roof.In ground floor including roof.

9.01 upto 150 mm. thick Cum 5.00 939 4695.00

9.02 above 150 mm. thick Cum 12.00 1417 17004.00

10.00 Dismantling R.C. floor, roof, beams etc. including cutting rods and removing rubbish as directed within a lead of 75 m. including stacking of steel bars.

(a) In ground floor including roof. Cum 935.17 1956 1829193.00

11.00 Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal, loading

into truck and cleaning the site in all respect as per direction of Engineer in charge. Cum 4211.90 166 699175.00

SECTION 1 : BUILDING WORKS (C)-BRICK WORK, CONCRETE WORK ETC.

A - Brick Work

12.00 Brick-on-edge floor or pavement with 1st class brick set close in cement mortar (1:6) and laid with cushion of sand below (including cost thereof) including ruled or flush pointing

with cement mortar (1:4) on top. Sqm 5808.82 634 3682792.00

13.00 Brick work with 1st class bricks in cement mortar (1:4)

13.01 In foundation and plinth Cum 4065.96 4588 18654624.00

13.02 In superstructure, ground floor Cum 20301.49 4778 97000519.00

14.00 Extra Labour for brick for string course and set square brick work, brackets and similar other projection brick works to be paid in respective item. Cum 12.00 251 3012.00



15.02 In superstructure, ground floor Cum 12.00 4434 53208.00

16.00 Add extra for basement and each additional floor over the rate for Ground Floor

16.01 Upto 4th Floor Cum 24359.72 111 2703929.00


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

17.00 125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor. Sqm 10788.33 588 6343538.00

18.00 125 mm. thick brick work with 1st class bricks in cement mortar (1:3) in ground floor. Sqm 55.00 618 33990.00

19.00 Extra for using approved H.B netting in every third layer in 16 & 17 above in any floor Sqm 10788.33 41 442322.00

20.00 200 mm. thick Brick work with Fly Ash Bricks set in cement sand mortar (1:6) including raking out joints, curing, scaffolding etc. complete in all respect.

20.01 In ground floor Cum 20.00 4541 90820.00

20.02 Add extra for each addl. floor

20.03 Upto 4th Floor Cum 5.00 115 575.00

21.00 100 mm. thick brick work with Fly Ash Bricks set in cement sand mortar (1:4) including raking out joints, curing, scaffolding etc. complete in all respect.

21.01 In ground floor Sqm 35.00 526 18410.00

21.02 Add extra for each addl. floor over the rate of ground

21.03 (i) up to 4th floor Sqm 25.00 10 250.00

22.00 1st class brick work of width 200 mm. with non-modular bricks in cement sand mortar (1:6) .


22.02 In superstructure ground floor Cum 10.00 4505 45050.0022.02 In superstructure ground floor Cum 10.00 4505 45050.00

23.00 1st class brickwork of width 200 mm. with non-modular bricks in cement and sand mortar (1:4)


23.02 In superstructure ground floor Cum 25.00 4778 119450.00

24.00 Add extra for each additional floor over the rate for ground floor on items 27, 28, 29 of subhead A above.

24.01 upto 4th floor Cum 40.00 111 4440.00

25.00 250 mm th. Autoclave aerated concrete block Work with size 625 mm x 250 mm x 125 mm- Grade-I,having drying Shrinkage less than 0.05% conforming to IS: 2185 ( Part-3)-1984

made up of fly ash(conforming to IS: 3812-1981, with permissible loss on ignition upto 6% ), lime , cement and laid in Cement Mortar (1:6) complete in all respect as per direction &

satisfaction of Engineer -in Charge. 25.01 In Super Structure, Ground Floor Cum 15.00 5819 87285.00

26.00 125 mm thick Autoclave aerated concrete block Work with size 625 mm x 250 mm x 125 mm- Grade-I,having drying Shrinkage less than 0.05% conforming to IS: 2185 ( Part-3)-

1984 made up of fly ash(conforming to IS: 3812-1981, with permissible loss on ignition upto 6% ), lime , cement and complete in all respect as per direction & satisfaction of

Engineer -in Charge .

26.01 a) laid in Cement Mortar (1:6) -In Super Structure, Ground Floor. Sqm 40.00 736 29440.00

27.00 Add extra for each additional floor over the rate for ground floor

27.01 (a) upto 4th floor Sqm 35.00 12 420.00

28.00 100 mm thick Autoclave aerated concrete block Work with size 625 mm x 250 mm x 125 mm- Grade-I,having drying Shrinkage less than 0.05% conforming to IS: 2185 ( Part-3)-

1984 made up of fly ash(conforming to IS: 3812-1981, with permissible loss on ignition upto 6% ), lime, cement and laid in Cement Mortar (1:6) complete in all respect as per

direction & satisfaction of Engineer -in Charge .

28.01 a) laid in Cement Mortar (1:6) -In Super Structure, Ground Floor. Sqm 35.00 594 20790.00


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

29.00 Add extra for each addl, floor over the rate above Ground Floor

29.01 (I) upto 4 th floor Sqm 20.00 12 240.00

B - Concrete works:-

30.00 (I) Cement concrete with graded stone ballast (40 mm size excluding shuttering) In ground floor (A) [Pakur Variety]

30.01 (a) 1:3:6 proportion Cum 10.00 4174 41740.00

30.02 (b) 1:4:8 proportion Cum 6579.28 3866.0 25435496.00

31.00 Add extra over the rate of ground floor for basement and each additional floor above ground floor.

31.01 (i) upto 4 th floor. Cum 21143.98 95 2008678.00

32.00 Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and einforcement,if any, in ground floor as per relevant IS codes.

32.01 (i) Pakur Variety Cum 44.30 4840.06 214415.00

33.00 Controlled Cement concrete with well graded stone chips (20 mm nominal size) excluding shuttering and reinforcement with complete design of concrete as per IS : 456 and

relevant special publications, submission of job mix formula after preliminary mix design after testing of concrete cubes as per direction of Engineer-in charge. Consumption of

cement will not be less than 300 Kg of cement with Super plasticiser per cubic meter of controlled concrete but actual consumption will be determined on the basis of preliminary

test and job mix foumula. In ground floor and foundation.[using concrete mixture] (b) M 25 Grade

33.01 (i) Pakur Variety Cum 484.32 5875.99 2845859.00Cum 484.32 5875.99 2845859.00

34.00 Controlled Cement concrete with well graded stone chips (20 mm nominal size) excluding shuttering and reinforcement with complete design of concrete as per IS : 456 and

relevant special publications, submission of job mix formula after preliminary mix design after testing of concrete cubes as per direction of Engineer-in charge. Consumption of

cement will not be less than 320 Kg of cement with super plasticiser per cubic meter of controlled concrete but actual consumption will be determined on the basis of preliminary

test and job mix foumula. In ground floor and foundation. [using concrete mixture] (c) M 30 Grade

34.01 (i) Pakur Variety Cum 5.00 6056.99 30285.00

35.00 Controlled Cement concrete grade mix with well graded stone chips (20 mm nominal size) including adequate plasticiser & excluding shuttering and reinforcement with complete

design of concrete as per IS : 456 and relevant special publications, submission of job mix formula after preliminary mix design after testing of concrete cubes as per direction of

Engineer-in charge. Consumption of cement will not be less than 340 Kg of OPC [43/53 grade ] cement with Super plasticiser per cubic meter of controlled concrete but actual

consumption will be determined on the basis of preliminary test and job mix foumula. In ground floor and foundation. [using concrete mixture] With Pakur Variety (d) M 35 Grade of

ConcreteCum 15.00 6205.99 93090.00

36.00 Batch Mixed concrete of M 25 Grade with well Graded stone chips of 20 mm nominal size containing designed quantity of cement per Cu. M of Wet concrete produced in

computerised batching plant under controlled condition using approved super plasticizer designing concrete mix following I.S 10262 and I.S. 456 transporting the mix with agitation

in transit mixer to work site depositing the mix on a platform erected for the purpose at required level of concreting and then placing the mix in its final location of form work

compacting and curing the same complete as per specification and direction of the Engineer-in charge including hire charges of computerised batching plant, transit mixer with all

accessories vibrators etc. inclusive of all other incidental charges in this connection complete but excluding cost of hire charge of platform and its supporting B67staging which

would be paid through separate item. Consumption of cement will not be less than 300 Kg of cement per cubic meter of controlled concrete but actual consumption will be

determined on the basis of preliminary test and job mix foumula. [Cement to be supplied by Deptt, if Cement is supplied by agency then item rate to be deduced as per Format A of

Annexure I] [with Batching Plant & transit mixer] In Ground Floor& Foundation. [Pakur Variety].

36.01 (i) With approved concrete pump. Cum 26067.80 5941.99 154894607.00


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.





accessories vibrators etc. inclusive of all other incidental charges in this connection complete but excluding cost of hire charge of platform and its supporting staging which would

be paid through separate item. Consumption of cement will not be less than 320 Kg of cement per cubic meter of controlled concrete but actual consumption will be determined on

the basis of preliminary test and job mix foumula. [Cement to be supplied by Deptt, if Cement is supplied by agency then item rate to be deduced as per Format A of Annexure I]

[with Batching Plant & transit mixer] In Ground Floor & Foundation. [Pakur Variety].






accessories vibrators etc. inclusive of all other incidental charges in this connection complete but excluding cost of hire charge of platform and its supporting staging which would

be paid through separate item. Consumption of cement will not be less than 340 Kg of OPC [43/53 grade] cement per cubic meter of controlled concrete but actual consumption

will be determined on the basis of preliminary test and job mix foumula. [Cement to be supplied by Deptt, if Cement is supplied by agency then item rate to be deduced as per

Format A of Annexure I] [with Batching Plant & Transit Mixer] In Ground Floor& Foundation [Pakur Variety].


39.00 Providing Bored Cast-in-situ M-30/M-35 grade R.C.C. pile in position as per specifications in all kinds of soil including cost of boring using drilling mud to stabilize the bore and39.00 Providing Bored Cast-in-situ M-30/M-35 grade R.C.C. pile in position as per specifications in all kinds of soil including cost of boring using drilling mud to stabilize the bore and

flushing the bore of excess mud with freshly prepared drilling fluid by using pumps prior to placing concrete by tremie pipe in one continuous operation and including the cost of all

materials and labour for placing of concrete and also including the cost of mobilization and hire charges of all equipment necessary for boring, welding of reinforcement cage as

necessary and lowering of reinforcement cage, preparation and placing of concrete, including the cost of concrete but excluding the cost of reinforcement and labour for bending

binding etc. complete as per Drawing and Technical Specifications and removal of excavated earth with all lifts and lead upto 1000 m. Work to be executed as per IS: 2911 (Part II

Sec 2).

39.01 (a) Using hydraulic piling rig

39.02 iv) Pile diameter - 600 mm. in M-30 grade Mtr 52019.10 3753.44 195250571.00

39.03 Pile diameter - 600 mm. in M-35 grade Mtr 4194.00 3799.03 15933132.00

Vertical load testing of piles in accordance with IS 2911 (Part IV) including installation of loading platform by Kentledge method and preparation of pile head or

construction of test cap and dismantling of test cap after test etc. complete as per specification & the direction of Engineer in-charge.

Note: 1. Initial and Routine Load Test shall not be carried out by Dynamic method of testing.

Note: 2. Testing agency shall submitt the design of loading platform for the approval of Engineer-in-charge.

Group of two or more piles upto 50 tonne Safe capacity

39.04 Initial test (Test Load 2.5 times the Safe capacity) Per Test 4 56332.75 225331.00

39.05 Integrity testing of Pile using Low Strain/ Sonic Integrity Test/ Sonic Echo Test method in accordance with IS 14893 including surface preparation of pile top by

removing soil, mud, dust & chipping lean concrete lumps etc. and use of computerised equipment and high skill trained personal for conducting the test &

submission of results, all complete as per direction of Engineer-in-chargeper test 2848 750.95 2138706.00

Note :- The inclusion of the above item in the schedule of work shall be judiciously decided by the technical sanctioning authority, keeping in view the quality

control, type of soil strata & importance of the project

40.00 Removal of mud/sludge/slurry/liquid earth obtained during piling work from the working site and disposal of the same beyond the KMC/Municipal or any suitable area with

conformity of Municipal Corporation Rules using tanker including loading and unloading the same with pump, clearing the site complete in all respect as per direction of the

Engineer-in-charge.

40.01 (c) For 600mm Pile Mtr 150.00 38.00 5700.00


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

41.00 Cement concrete (1:1.5:3) with graded stone chips 5.6 mm size with hexagonal square mesh wire netting, I.R.C. fabric mesh or X.P. M. fitted and fixed after tying the existing

reinforcement on concrete without distributing the same and with proper scarping and cleaning the reinforcement and disturbed concrete with wire brush etc. after applying a coat

of cement including the cost of wire netting I.R.C or X. P. M. & cost of all handling and scaffolding complete as per direction of Engineer-in -charge.41.01 c) 37.5mm thick Sqm 25.00 551 13775.00

42.00 Precast pierced concrete jally work as per design and manufacturer's specification including moulding etc. with stone chips and necessary reinforcement shuttering complete

including fitting, fixing in position in all floors.

42.01 (a) 50 mm. thick panels Sqm 50.00 359 17950.00

43.00 R.C. weather board (1:1.5:3) with stone chips and necessary reinforcement upto 1% (including main and distribution bars), shuttering and 10 mm. thick cement plaster (1:4)

including all moulding, drip course etc. complete in ground floor.

43.01 50 mm thick using steel of

43.02 I. SAIL/ TATA/RINL Sqm 93.45 953 89058.00

44.00 R.C. shelves (1:1.5:3) either precast or cast in situ with stone chips and necessary reinforcement upto 1% (0.8% main and 0.2% distribution bars), shuttering etc. and 10 mm. thick

cement plaster (1:4) including neat cement finishing and cutting chase fitting and fixing in position, mending good damages as necessary complete. In ground floor

44.01 50 mm. Thick panels

44.02 I. SAIL/ TATA/RINL Sqm 424.29 941 399257.00

45.00 Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required45.00 Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required

bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor)

(When the height of a particular floor is more than 4 m the equivalent floor height shall be taken as 4 m and extra for works beyond the initial 4 m ht. shall be allowed under 12 (e)

for every 4 m or part thereof)

45.01 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge. Sqm 35.00 328 11480.00

45.02 Above 30 mm & upto 37 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge. Sqm 50.00 339 16950.00

45.03 Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering in any concrete work Sqm 132686.00 363 48165018.00

45.04 Extra for works beyond the roof of ground floor per additional floor

45.05 (i) upto 4th (per floor) and in basement. Sqm 110.00 18 1980.00

45.06 Extra for staging beyond 4 m in any floor (Mode of measurement: area in plan x mean height of staging upto soffit of shuttering above initial 4 m) Sqm 45031.95 59 2656885.00

45.07 25 mm to 30 mm shuttering without staging in foundation Sqm 25656.30 205 5259542.00

45.08 Steel shuttering forms made out of 2mm thick (14 SWG) M.S. Sheet welded with Peripheral angle stiffner (40x40x5mm) frame work and placed over suitable Tele Scopic

Adjustable Span (2.45-4.16m) weight > 39 kg (S0+S1) by approved adjustable telescopic prop. (2.50-4.25m) weight 718.5 Kg.

46.00 Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary),

cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per

drawing and direction.

46.01 For works in foundation, basement and upto roof of ground floor/upto 4 m

46.02 I. SAIL/ TATA/RINL Mt 7191.575 57424 412969003.00

47.00 Add Extra over the rate of ground floor initial 4m for each basement floor and each additional floor below/above ground floor.

47.01 (i) Upto 4 th floor roof in each addl. Floor Qntl 33951.00 43 1459893.00


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

C. REPAIR AND REHABILITATION WORKS

48.00 (b) Applying 2 coats of Non-Toxic Acrylic Polymer modified Paint having adhesive & waterproofing properties by mixing in proportion (1 liquid: 4 cementitious material) or as per

manufacturer's specification for water proofing layer in water tank etc. Sqm 350.00 257 89950.00

49.00 Extra rate for using water proofing and plasticising admixture @ 0.2% by weight of cement (or at manufacturer's specified rate) for concrete of various grades. Kg 250.00 119 29750.00

SECTION 1 : BUILDING WORK (D)- FLOORING

A. ORIGINAL WORKS

50.00 Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches. Sqm 21303.32 24 511280.00

51.00 40 mm. thick damp proof course with cement concrete (1:1.5:3) (with graded stone chips 20 mm nominal size) with water proofing compound of approved brand @ 0.2% weight of

cement including cost of materials over two coats of non toxic acrylic polymer modified cementitious waterproofing slurry coat complete [cost of water proofing compound and non

toxic paint to be paid seperately) for underground water retaining structures. Sqm 2027.89 261 529279.00

52.00 Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary)

and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slurry

before flooring works using cement @ 1.75 kg/sq.m all complete including all materials and labour. In ground floor. 3 mm. thick topping (High polishing grinding on this item is notbefore flooring works using cement @ 1.75 kg/sq.m all complete including all materials and labour. In ground floor. 3 mm. thick topping (High polishing grinding on this item is not

permitted with ordinary cement). Using grey cement

52.01 35 mm. thick Sqm 4762.89 296 1409815.00

53.00 Extra cost of colouring over corresponding items of artificial stone

53.01 (A) For above item

53.02 [with 3 mm thick colour topping]

53.03 (ii) Colouring Pink, Cream, Yellow, Green Sqm 920.68 150 138102.00

(These colour items should be done by using white cement only for 3 mm topping using white cement @ 3.4 kg/Sq.m, marble dust @ 1.7 kg/Sq.m and pigment @ 0.35 kg/ Sq.m.)

54.00 35 mm. thick (finished) terrazo work, cast in situ in floor and 20 mm. thick (finished) in dado, skirting staircase etc. laid in panels or pattern using cement concrete (1:2:4)backing

with 12 mm stone chips as directed and necessary terrazo topping with mosaic chips including rounding off corners and high polishing etc. complete as per specification laid down

in I.S : 2114-1962 including raking out joints or roughening of concrete surface & application of cement slurry before flooring works using cement @ 1.75 kg./sq.m. all complete

including all materials & labour. (Add extra @ 1.5% for each additional floor upto 4 th floor and @ 1.75 % for each addl. floor above 4 th floor) [White cement for item No 9 of

subhead A to be supplied by the contractor including cost thereof and grey cement willbe supplied by the Dept at the isuue rate]

54.01 (A) 9 mm. thick terazo topping, laying and finished to 6 mm. thick after final grinding with 0 to 7 mm. size mosaic chips

(iv) In silver grey (ordinary cement and white cement to be used in equal proportion in topping) Sqm 416.00 787 327392.00

54.02 (B) 12 mm. thick terrazo topping, laying and finihsed to 9 mm. thick after final grinding with 0 to 10 mm. size mosaic chips.

(iv) In silver grey (ordinary cement and white cement to be used in equal proportion in topping) Sqm 295.00 738 217710.00

55.00 20 mm. thick (finished) terrazo work with precast tiles set on 20 mm avg thick cement mortar (1:3) and sides with admixture of pigment and white/grey cement as necessary in

floor, dado, skirting, staircase etc. laid in panels or in patterns including high polishing, raking out joints, roughening of concrete surface & application of cement slurry before

flooring works using cement @ 1.75 kg. per sq.m. all complete including all materials & labour. ( Add extra @ 1.5 % for each additional floor upto 4th floor and @ 1.75 % for each

additional floor above 4th floor). In ground floor.

55.01 (A) 9 mm. thick terrazo topping, laying and finished to 6 mm. thick after final grinding with 0 to 7 mm. size mosaic chips. Sqm 200.00 986 197200.00

55.02 (iv) In silver grey (ordinary cement and white cement to be used in equal proportion in topping).


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

55.03 (B) 12 mm. thick terrazo topping, laying and finished to 9 mm. thick after final grinding with 0 to 10 mm. size mosaic chips. Sqm 180.00 1025 184500.00

55.04 (iv) In silver grey (ordinary cement and white cement to be used in equal proportion in topping)

56.00 Supplying dividing strip fitted and fixed with cement mortar (1:3) in mosaic or patent stone floor, dado etc. complete as per direction of the Engineer-in-charge.

56.01 Glass - 3mm. Thick

56.02 (c) 37 mm. wide strip Mtr 1783.63 19 33889.00

57.00 Supplying, fitting and fixing Black Stone slab used in Kitchen slab, alcove, wardrobe etc. laid and jointed with necessary adhesive Cement mortar (1:2) including grinding or

polishing as per direction of Engineer-in -Charge in Ground Floor.57.01 i) Gyer

57.02 (b) Slab Thickness above 25 mm and upto 37.5 mm Sqm 38.00 712 27056.00

57.03 Add Extra for each additional floor - upto 4th floor Sqm 34.00 12 408.00

58.00 (a) Supplying, fitting and fixing 20 mm. to 37.5 mm. thick Chunar / Mirzapur / Dholpur slab in floor set in 20 mm thick (avg) cement mortar (1:4) bed and pointing in cement mortar

(1:2) [1 cement: 2 marble dust] with admixture of pigment matching the stone shade, polishing all complete as per direction of the E-I-C (Using cement slurry for bedding @ 4.4

kg/Sq.m and jointing @ 2.4 kg/Sq.m).


59.00 (b) Supplying fitting and fixing in position 8 mm. to 12 mm. thick Dholpur slab in wall, dado making suitable arrangement to hold the stone properly with approved polymerised

adhesives (6 mm thick) as per ISI specification including pointing with cement mortar (1:2) (1 cement: 2 marble dust) with admixture of pigment matching the stone shades all

complete as per direction of Engineer-in-charge including cost of all materials, labour, scaffolding, staging, curing complete [using white cement for pointing @ 2.4 kg/ Sq.m].complete as per direction of Engineer-in-charge including cost of all materials, labour, scaffolding, staging, curing complete [using white cement for pointing @ 2.4 kg/ Sq.m].


60.00 18 mm. to 22 mm. thick, kota stone slab set in 20 mm thick (avg) cement mortar (1:4) in floor, stair & lobby including pointing in cement slurry with admixture of pigment matching

the stone shade, including grinding & polishing as per direction of Engineer - in - charge to match with the existing work. [Slurry for bedding @ 4.4 kg/Sq.m and pointing @2.0

kg/Sq.m] Sqm 27024.01 1000 27024010.00

60.01 Extra cost of labour for prefinished and premoulded Nosing to treads of steps, railing, window sill etc. of Kota Stone. Mtr 3703.64 224 829615.00

60.02 Extra cost of labour for grinding Kota Stone Floor in treads and riser of Steps. Sqm 2995.66 209 626093.00

61.00 Supplying, fitting and fixing 18 mm. to 22 mm. thick kota stone slab in wall, dado in 15 mm thick [avg] cement mortar (1:3) including making suitable arrangement to hold the stone

properly by brass / copper hooks including pointing in cement mortar (1:2) (1 cement : 2 marble dust) with admixture of pigments matching the stone shade, including grinding and

polishing all complete as per direction of Engineer-in-charge including cost of materials, labour, scaffolding, staging, curing complete. [Using cement slurry for bedding @4.4

kg/Sq.m and for jointing @1.8 kg/Sq.m] Sqm 3879.04 1140 4422106.00

62.00 Supplying, fitting and fixing Marble Slab/tile of 15 to 18 mm thickness in floor, lobby, stair, landing & treads etc. over 20 mm (av.) thck base of Cement mortar (1:2) laid with white

cement slurry @ 4.4 kg/Sq.m before placing marble & jointed with white cement slurry @ 2.0 kg/Sq.m with necessary pigments including grinding and Granite polishing as per

direction of Engineering -in -Charge in Ground Floor. White cement and Pigment to be supplied by the Agency]

62.01 (a) With Makrana plain pink / Adranga Pink / Garbh Gulabi / Udaypur pink / Udaypur Green / Black Bhaslana

62.02 (ii) Area of each Slab/tile exceeding 0.3 sq.m. but not exceeding 0.6 sq.m. Sqm 9528.24 1669 15902633.00

63.00 Extra cost of labour for prefinished and premoulded Nosing to treads of steps, railing, window sill etc. of Marble Stone. Mtr 2375.53 258 612887.00

64.00 Extra cost of labour for Marble Stone Floor in treads of Steps. Sqm 847.36 226 191503.00

65.00 Supplying, fitting, fixing marble slab/tiles, 15 mm. to 18 mm. thick in dado / wall in 15 mm thick [avg] cement mortar (1:2) including making suitable arrangements to hold the stones

properly by brass / copper hooks applying white cement slurry @ 4.4 kg/ sq.m at the back side of marble & pointing in cement mortar (1:2) (1 cement, 2 marble dust) with admixture

of pigment matching the stone shades including polishing all complete as per direction of the Engineer-in-charge including cost of materials, labours, scaffolding, staging, curing

complete. [White cement, Pigment to be supplied by the Agency]


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

65.01 (a) With Makrana plain pink / Adranga Pink / Garbh Gulabi / Udaypur Pink / Udaypur green / Black Bhalsana

65.02 (ii) Area of each slab/tile exceeding 0.3sq.m. but not exceeding 0.6 sq.m. Sqm 434.47 1790 777701.00

66.00 Supplying fitting and fixing 15 to 18 mm thick Marble slab/Tile in riser of step or skirting (upto 300 mm ht) over 15mm (avg) thick base of Cement mortar (1:2) laid with white cement

slurry @ 4.4 kg/ Sq.m at back side of marble and jointed with white cement slurry @ 2.2 kg/ Sq.m with necessary pigments including grinding and Granite Polishing. [White cement

and Pigment to be supplied by the Agency]

66.01 (a) With Makrana plain pink / Adranga Pink / Garbh Gulabi / Udaypur Pink / Udaypur green / Black Bhalsana

66.02 (ii) Area of each tile exceeding 0.3sq.m. but not exceeding 0.6 sq.m. Sqm 4292.44 1808 7760732.00

67.00 Providing and fixing machine cut, mirror polished, Italian Marble stone (Imported quality, such as Perlato, Bottichino, Crema, Antique Beige, Dark Emperadore, Red Verona, Black

Marquino etc.) flooring laid in required pattern in linear portion of the building all complete as per architectual drawings with Italian Marble stone slab laid over 20 mm (average) thick

base of cement morter 1:4 (1 cement : 4 coarse sand) laid and jointed with white cement slurry @ 4.4 kg/sqm including pointing with white cement slurry mixed with pigment to

match the marble shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in- Charge. [This work should not be executed

without specific permission of Superintending Engineer]

67.01 a) Light Beige Colour (such as Perlato, Bottichino, Crema)

67.02 ii) 20 mm thick Italian Marble stone slab Sqm 263.04 4927.00 1295998.00

67.03 b) Dark Beige Colour (such as Antique Beige, Breccia)


67.05 c) Dark Colour (such as Dark Emperadore, Red Verona, Black


67.07 d) Plain White


67.09 e) White with veins.

67.10 ii) 20 mm thick Italian Marble stone slab. Sqm 243.00 5987.00 1454841.0067.10 ii) 20 mm thick Italian Marble stone slab. Sqm 243.00 5987.00 1454841.00

67.11 f) More White with less veins


68.00 Extra cost of labour for prefinished and premoulded window sill of Italian Marble Stone. Metre 113.00 261.00 29493.00

69.00 Providing and fixing machine cut, mirror polished, Italian Marble stone (Imported quality, such as Perlato, Bottichino, Crema, Antique Beige, Dark Emperadore, Red Verona, Black

Marquino etc.) in dado/wall laid in required pattern in linear portion of the building all complete as per architectural drawings with Italian Marble stone slab laid over 15 mm (average)

thick base of cement morter 1 : 2 (1 cement : 2 coarse sand) including making suitable arrangements to hold the stones properly by brass / copper hooks applying white cement

slurry @ 4.4 kg/sq.m the back site of marble and pointing with cement morter (1:2)(1 Cement : 2 Marble dust) admixed with pigment to match the marble shade including rubbing,

curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge including cost of materials, labours, scaffolding, staging, curing complete. [White

cement, Pigment to be supplied by the Agency]. [This work should not be executed without specific permission of Superintending Engineer]









69.09 e) White with veins




70.00 Supplying fitting and fixing Italian Marble slab/Tile in skirting (upto 300 mm ht) over 15mm (avg) thick base of Cement mortar (1:2) laid with white cement slurry @ 4.4 kg/ Sq.m at

back side of marble and jointed with white cement slurry @ 2.2 kg/ Sq.m with necessary pigments including grinding and Granite Polishing. [White cement and Pigment to be

supplied by the Agency] [This work should not be executed without specific permission of Superintending Engineer]




S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.







70.09 e) White with veins




70.13 Note: Add extra for each addl, floor

(I) upto 4 th floor Sqm 2362.00 12.00 28344.00

71.00 Supplying, fitting & fixing granite tiles 10mm to 12mm. thick in columns, wall, facia etc. with 15 thick [avg] cement mortar (1:2) including making suitable arrangements to hold the

stones properly by brass / copper hooks including pointing in cement mortar (1:2) (1 white cement : 2 marble dust) with admixture of pigment matching the stone shades all

complete as per direction of the Engineer-in-charge including cost of all materials, labours, scaffolding, staging, curing and roughening of concrete surface complete. [Using cement

slurry at back side of tiles@ 4.4 kg/sq.m & white cement slurry for joint filling @ 1.8 kg/sq.m] - Area of Each slab upto 0.20 sqmt. Sqm 492.49 1743 858410.00

72.00 Supplying, fitting & fixing granite slabs 15mm to 18 mm. thick with uniform texture & without decorative veins in columns, wall, facia etc. with 15 mm thick [avg] cement mortar (1:2)

including making suitable arrangements to hold the stones properly by brass / copper hooks including pointing in cement mortar (1:2) (1 white cement : 2 marble dust) with

admixture of pigment matching the stone shades all complete as per direction of the Engineer-in-charge including cost of all materials, labours, scaffolding, staging ,curing and

roughening of concrete surface complete. Area of each granite slab > 0.60 sqmt upto 1.00 sqmt [Using cement slurry at back side of granite @ 4.4 kg/sq.m & white cement slurry

for joint filling @ 1.8 kg/sq.m] Sqm 457.00 2304 1052928.00

73.00 Supplying, fitting & fixing granite slabs 15mm to 18 mm. thick with uniform texture & without decorative veins in columns, wall, facia,rise etc. with 15 mm thick [avg] cement mortar

(1:2) including making suitable arrangements to hold the stones properly by brass / copper hooks including pointing in cement mortar (1:2) (1 white cement : 2 marble dust) with

admixture of pigment matching the stone shades all complete as per direction of the Engineer-incharge including cost of all materials, labours, scaffolding, staging, curing and

roughening of concrete surface complete. [Using cement slurry at back side of granite @ 4.4 kg/sq.m & white cement slurry for joint filling @ 1.8 kg/sq.m] In ground floor

(a) Area of each Granite slab 0.6 to 1.0 Square meter. Sqm 2349.86 3321 7803885.00

74.00 supplying,fitting & fixing granite slab 15mm to 18mm thick in floor, lobby, stair, landing and treads etc. over 20mm (avg) thick base of cement morter (1:2) laid with white cement

slurry @ 4.40Kg per Square meter before placing of granite and jointed with white cement slurry @ 2.0 Kg per square meter with necessary pigments and complete as per direction

of Engineer-in-charge including cost of all materials, labours, curing and roughening of concrete surface complete. In ground floor

(b) Area of each Granite slab 0.6 to 1.0 Square meter. Sqm 1179.70 3154 3720774.00

75.00 Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile &

finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic

adhesive & grout materials etc.

(A) Floor

With Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m.

75.01 (b) Area of each tile above 0.09 Sq.m

75.02 (ii) Other than Coloured decorative including white Sqm 1305.01 839 1094903.00


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

(B) Wall

With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m.

75.03 (b) Area of each tile above 0.09 Sq.m

75.04 (ii) Other than Coloured decorative including white Sqm 10798.75 1026 11079518.00

76.00 Supplying and laying true to line and level vitrified tiles of approved brand (size not less than 600 mm X 600 mm X 10 mm thick) in floor, skirting etc. set in 20 mm sand cement

mortar (1:4) and 2 mm thick cement slurry back side of tiles using cement @ 2.91Kg./sqM or using polymerised adhesive (6 mm thick layer applied directly over finished artificial

stone floor/Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per sqM below mortar only, joints grouted with admixture of white cement

and colouring pigment to match with colour of tiles / epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and

polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer's

specification and direction of Engineer-in-Charge.(White cement, synthetic adhesive and grout material to be supplied by the contra conc

76.01 (I) With application slurry @1.75 kg/ Sq.m, 20 mm sand cement mortar (1:4) & 2 mm thick cement slurry at back side of tiles, 0.2 kg/ Sq.m white cement for joint filling with pigment.

76.02 (A) Deep Colour & White Sqm 536.61 1676 899358.00

76.03 (B) Light Colour Sqm 4018.35 1257 5051066.00

77.00 75 mm glazed ceramic tiled border (listel type)

77.01 a) with 15 mm thick cement mortar (1:3) and 2 mm thick cement slurry using cement @ 2.91 Kg/Sq.m Metre 760.00 176 133760.00

78.00 Supplying, fitting & fixing Glass mosaic tiles at finished plain wall surface of size 20 mm x 20 mm x 4 mm in all colour, design, fixing in customize design as per direction of Engineer-

in- Charge. The glass mosaic tiles to be fixed on the wall surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. The rate isin- Charge. The glass mosaic tiles to be fixed on the wall surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. The rate is

inclusive of all operation, material and required pattern approved by Engineer-in-Charge. [At Ground Floor]

78.01 iii) Mural aligned/ CAD Design Type Sqm 80.94 3614.00 292517.00

78.02 iv) Repeated pattern/ Border Aligned Type Sqm 98.00 2284.00 223832.00

79.00 Supplying, fitting & fixing best quality digital printed Ceramic tiles in coloured decorative on walls and floors to match with the existing work & 4 nos. key stones (10mm) fixed with

adhesive 4.5 mm thick at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of

concrete surface, if necessary or by synthetic adhesive & grout materials etc. With polymerised adhesive and epoxy grout pointing including spacer - 2mm (When tiles are laid over

existing hard ready surface) all complete as per direction of Engineer-in-charge. Sqm 399.00 1060.00 422940.00

79.01 Add extra for each addl, floor (I) upto 4 th floor Sqm 466.00 12.00 5592.00

80.00 Supplying, fitting & fixing true to line and level digital elevation Ceramic tiles of approved brand conforming to IS:15622:2006 Group B III and tested as per IS:13630:2006 as

ornamental cladding on external wall in natural stone, brick, wood, bamboo pattern/ design fixed with adhesive 4.5 mm thick at the back of each tile & finishing the joints with white

cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. With

polymerised adhesive and epoxy grout pointing including spacer - 2mm (When tiles are laid over existing hard ready surface) all complete as per direction of Engineer-incharge.

Sqm 166.00 982.00 163012.00

80.01 Add Extra for each additional floor upto 4th floor Sqm 155.00 16.00 2480.00

81.00 Supplying and laying true to line and level Double Charge Vitrified Tiles of approved brand conforming to IS 15622: 2006 (Group B I a) and tested as per IS 13630:2006 (relevant

parts) [Non-modular sizes for tiles with Water Absorption (av.) ≤ 0.08 %] in floor, skirting etc. using polymerised adhesive of 6mm thick layer applied directly over finished artificial

stone floor/Mosaic etc without any backing course and joints grouted with admixture of white epoxy grout materials of approved brand including spacer -2mm as directed and

removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials,Iabour and

all other incidental charges complete as per direction of Engineerin- Charge. (Note: This work should not be executed without specific permission of Superintending Engineer)

81.01 (a) ln Ground FIoor:(size not Iess than 600mmX 600 mm X 9.5 mm thick) Sqm 4437.79 1566.00 6949579.00

81.02 (b) ln Ground FIoor:(size not Iess than 800mmX 800 mm X 10.2 mm thick) Sqm 1961.00 2613.00 5124093.00



S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

82.00 Supplying and laying true to line and level Double Charge Vitrified Tiles of approved brandconforming to IS 15622: 2006 (Group B I a) and tested as per IS 13630:2006 (relevant

parts) [Non-modular sizes for tiles with Water Absorption (av.) ≤ 0.08 %] in floor, skirting etc. set in 20 mm thick sand cement mortar (1:4) bed prepared after application of slurry

using 1.75Kg of cement per Sqm over the base and 2mm thick cement slurry using cement @2.91Kg./sqm at the back side of the tiles and laid over the mortar bed using 0.2

kg/sqm of White cement used for joint filling with approved pigment as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft

and dry cloth upto mirror finish complete including the cost of materials,Iabour and all other incidental charges complete true to the manufacturer's specification and direction of

Engineer-in- Charge. (Note: This work should not be executed without specific permission of Superintending Engineer)

82.01 (a) ln Ground FIoor:(size not Iess than 600mmX 600 mm X 9.5 mm thick) Sqm 8452.31 1465.00 12382634.00

82.02 (b) ln Ground FIoor:(size not Iess than 800mmX 800 mm X 10.2 mm thick) Sqm 4172.00 2513.00 10484236.00


83.00 Supplying, fitting and fixing 8mm thick Laminated wooden Flooring Work conforming to EN13329:2006 with plank size not Iess than 1200 mm X 190 mm (with unilin/tongue-groove

locking arrangement) having 0.2mm thk top abrasive layer over a decorative layer followed by a High-density fibreboard (HDF) having density > 850 kg/m3 substrate core over a

rasin saturated backing layer and installing through unilin or tongue- groove system (having locking strength not less than 1000 kg/m) over a 2 mm thk underlayer polyurethene

foam on polythene sheet 250 micron, over a smooth, flat, hard subfloor free from moisture (< 8%), grease etc. complete in all respect with requisite accessories like end profile,

transition profile, reducer 'T' profile etc. wherever required and preparation of base including all other incidental works as per direction & satisfaction of Engineer in charge. Cost of

Laminate Floor Accessories only (Skirting ,End edge, T- moulding,Reducer) shall have to be added separately, wherever required. (This work should not be executed without

specific permission of Superintending Engineer).

83.01 ln Ground FIoor :Category: Normal Footfall; Class-23; Abrasion resistance:-AC3 Thk on Swelling:- < 18% ; Impact resistance:- IC 1 Sqm 537.40 1116.00 599738.00


84.00 Supplying, fitting and fixing 8mm thick Laminated wooden Flooring Work conforming to EN13329:2006 with plank size not Iess than 1200mmX 190 mm (with unilin/tongue-groove

locking arrangement) having 0.2mm thk top abrasive layer over a decorative layer followed by a High-density fibreboard (HDF) having density > 940 kg/m3 substrate core over a

rasin saturated backing layer and installing through unilin or tongue- groove system (having locking strength not less than 1000 kg/m) over a 2 mm thk underlayer polyurethenerasin saturated backing layer and installing through unilin or tongue- groove system (having locking strength not less than 1000 kg/m) over a 2 mm thk underlayer polyurethene

foam on polythene sheet 250 micron, over a smooth, flat, hard subfloor free from moisture (< 8%), grease etc. complete in all respect with requisite accessories like end profile,

transition profile, reducer 'T' profile etc. wherever required and preparation of base including all other incidental works as per direction & satisfaction of Engineer in charge. Cost of

Laminate Floor Accessories only (Skirting,End edge, T- moulding,Reducer )shall have to be added separately, wherever required. (Note: This work should not be executed without

specific permission of Superintending Engineer).

84.01 ln Ground FIoor: Category: High Footfall ; Class-23; Abrasion resistance:-AC4 Thk on Swelling:- < 15% ; Impact resistance:- IC 2 Sqm 306.11 1275.00 390290.00


85.00 Supplying Laminate Floor Accessories (Skirting, End edge, Tmoulding, Reducer ) to 8mm thick Laminated wooden Flooring Work conforming to EN13329:2006 with plank size not

Iess than 1200mmX 190 mm (with unilin/tongue-groove locking arrangement) having 0.2mm thk top abrasive layer over a decorative layer followed by a High-density fibreboard

(HDF) having density > 840 kg/m3 substrate core over a rasin saturated backing layer and installing through unilin or tongue- groove system (having locking strength not less than

1000 kg/m) over a 2 mm thk underlayer polyurethene foam on polythene sheet 250 micron, over a smooth, flat, hard subfloor free from moisture (< 8%), grease etc. complete in all

respect as per direction & satisfaction of Engineer in charge. Cost of labour charge for fitting & fixing of Laminate Floor Accessories only (Skirting,End edge, Tmoulding, Reducer

)shall have to be added separately, wherever required. (Note: This work should not be executed without specific permission of Superintending Engineer).

85.01 ln Ground FIoor: Catagory: Normal/High Footfall Mtr 369.70 301.00 111280.00

85.02 Add Extra for each additional floor upto 4th floor Mtr 443.30 12.00 5320.00

86.00 Supplying& laying 20 mm designer chequered tiles of any shade and of approved quality as per IS: 1237: 1980 laid in patterns as directed in pavement, footpath including

necessary underlay 25 mm thick average cement mortar (1:3) complete in all respect with all labour and materials [using cement slurry @ 4.4 kg/Sq.m at back side of tiles. Cement

of mortar & slurry will be supplied by the Department. Border concrete if necessary to be paid separately]. Sqm 90.00 810 72900.00

87.00 Supplying & laying as per IRC-SP:063-2004 paver unit of any shade of approved quality as per relevant IS code, laid in pattern as directed in pavement, footpath, driveway (paver

block only), etc including necessary underlay complete in all respect with all labour and material. [Border concrete if necessary to be paid separately]. Note: Sub-grade CBR should

not be less than 5.

87.01 a) 25 mm thick Tiles as per IS: 1237-2012 for footpath,ramp,staircase of public building(over 25 mm thick (Avg) Cement mortar (1:3) & Cement Slurry @ 4.4 kg/Sq.m at back side

of Block. Cement for Mortar & Slurry to be supplied by Department).

87.02 (i) Grey Sqm 80.00 831 66480.00

(ii) Coloured Decorative Sqm 38.00 863 32794.00


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

B - Repair and Rehabilitation:-

88.00 Supplying & laying of approved brand of scratch proof, semi flexible P.V.C. blended homogeneous marble Vinyle flooring in tiles conforming to IS:3461, fixing with synthetic acrylic

adhesive after preparing the floor, levelling & smothaning when necessary with suitable putty, as per the design & instruction of the Engineer-in-charge. 2 mm thick

Sqm 62.00 578 35836.00

SECTION 1 : (E) ROOFING & SHEET WALLING

A:- ORIGINAL WORK

89.00 Roofing of Ranigunge pattern tiles 1st class quality (excluding supporting frame work) including tying eaves tiles with galvanised wire and pointing all joints with

89.01 (a) Valamoid or similar bituminous paste as approved Sqm 1421.00 238 338198.00

90.00 Supplying , fitting & fixing Zn-Al alloy (55% Al & 45% Zn) coating of 150 grams per sq. metre (followed by colour coated on both side) steel sheet work having minimum yield

strength of 550 Mpa of trapizoidal profile of approved make (excluding the supporting frame work) fitted and fixed with 55 mm & 25 mm self tapping screw, EPDM Washer 16 mm

dia & 3 mm th. washer etc. complete with 150 mm end lap and one corrugation minimum side lap. (Payment to be made on area of finished work).90.01 a) With 0.5 mm thick sheet Sqm 10.00 896 8960.00

91.00 Supplying, fitting and fixing glass reinforced polyester translucent fiber glass sheet to match with GCI Corrugation as per IS: 12866 - 1989 in roof fitted and fixed with 10 mm dia "J"

or "L" hook, bolts and nuts, limpet and bitumen washers and putty with 150mm end lap and one corrugation minimum side lap complete.

91.01 b) 2.0mm +/- 0.2 mm thick sheet.(3.25Kg/Sq.m)

91.02 iv) Special coloured textured tissue Sqm 27.00 1043 28161.00

92.00 Supplying, fitting & fixing polycarbonate sheet of approved make & brand conforming to IS: 14443-1997 and having 50 micron UV protection layer under co-extrusion technology,

Fire rating being B-s1 as per EN13501-1 certification, fitted and fixed with 60mm wide aluminium channel section top and bottom member in dry-glaze sandwitch system, (unit wt.

of top and bottom members: 0.375 kg/m & 0.69 kg/m) of approved brand and profile, EPDM quality rubber gaskets, anti dust tape, end closer "C" channel and 75 mm long Self

tapping screw being drilled through the centre leg of the bottom section with nuts placed at 300 mm apart without anyway puncturing the polycarbonate sheet, EPDM Washer 16

mm dia & 3 mm thick washer etc complete strictly as per manufacturers specification and direction of Engineerin-Charge. (Payment to be made on area of finished work) .In Roof:-

Natural/ Blue/Green/Bronze/Opal/Metallic grey colour

92.01 e)With 4 wall 10 mm overall thickness (wt.1.75kg/sqm,Ugvalue being 2.5 W/m2K, Min. cold bending radius of 1500 mm) Sqm 944.69 1829.00 1727838.00

93.00 Supplying, fitting & fixing 1.5mm thick Plain Corrugation Polycarbonate clear sheet made of national brand, excluding the supporting frame work, fitted and fixed with 10mm dia x

55mm Self-driving screws, EPDM washers and putty complete with 150mm end lap and one corrugation minimum side lap complete as per specification & direction of Engineer - in

- charge including materials, labour, taxes and all other incidental charges. (Payment to be made on area of finished work ). In Roof Sqm 1067.00 1991 2124397.00

B - WATER PROOF TREATMENT

94.00 Providing waterproofing treatment over concrete roof surface (old or new) by the application of two coats of slurry prepared with latex of approved brand, water and cement in the

proportion of (LP.W. Cement - 1:4:6) by volume, with brush in a time gap of minimum 4(four) hours to 14(fourteen) hours between the two layers, laying 20mm thick and sand and

cement consolidated plaster (1:4) admixed with Plastocrete Super of approved brand 0.2% by weight of cement, laying flat 1st class Brick Bats / Bricks over the mortar keeping a

gap of 10-20 mm between two bats, filling the vertical joints with the aforesaid mortar, providing a second layer of 20 mm thick sand and cement plaster (1:4) admixed with

Plastocrete Super as above over the brick layer, the top surface of the treatment should be chequered to provide the antistrip property.

(Note - the applicator is to be specialised in such type of work as per specification and maintain the I.S.I. Marked of the ingredients of the application. The skilled worker such as

Head Mason, Mason, Bhistri, Majdoor should be trained from expert and recognised technical Personal/Institution having affiliated ISO-9001)

94.01 (a) By Bricks (cement 25.66 kg/ Sq.m) Sqm 65.00 707 45955.00


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

SECTION 1 : (F)-STRUCTURAL STEEL WORKS, GRILLS, GATES ETC.

A:- ORIGINAL WORK

95.00 M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to

one another with bracket, gussets, cleats as per design, direction of Engineer-incharge complete including cutting to requisite shape and length, fabrication with necessary bolting,

metal arc welding conforming to IS: 816- 1956 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 1957, haulage, hoisting and erection all complete.

The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all

incidental chages such as electricity charges, labour insurance charges etc.

Payment to be made on the basis of calculated weight of structural members only in finished work as per IS specified weight. Payment for gusset, bracket, cleat, rivets, bolts and

nuts may be make by adding the actual weight of such items with the weight of finished structural members or 7% of weight for finished structural members weighing not less than

22.5 Kg. / m. or 15 % of weight for finished structal members weighing less than 22.5 Kg. / m. may be increased allow for bracket, cleat, rivet, bolts and nuts etc. and no seperate

payment being made for these items, as per direction of Engineer In Charge. The rates are considered for a height of erection 8m. / 2nd floor level from the ground.

95.01 II) For Structural Works in Roof Trusses etc. using joists, channels and angles of specified section weighing less than 22.5 kg/ m Mt 5.00 60276 301380.00

95.02 III) For built up sections / srtuctural members of specified sections weighing not less than 22.5 Kg./m Mt 17.00 61784 1050328.00

96.00 M.S. structural works in roof trusses with tubular sections conforming to IS: 806-1957 & IS: 1161- 1958 cnnected to one another with bracket, gusset cleats as per design, direction

of Engineer-in-charge complete including cutting to requisite size, fabrication with necessary metal arc welding conforming to IS: 816- 1956 & IS: 9595 using electrodes of

approved make and brand conforming to IS:814- 1957, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as

electrodes, gas and hire charge of all tools and plants and labour reqired for the work including all incidental chages such as electricity charges, labour insurance charges etc.

Payment to be made on the basis of calculated weight of structural tubular memebrs as specified in relevent IS code in finished work. Payment for gusset, bracket, cleat may be

made by adding the actual weight of such items with weight of finished structural members. The rates are considered for a height of erection 8 m. / 2nd floor level from the ground.

Add 1.5 % extra over the rate for each additional floor or 4m. beyond the initial 8 m. or part thereof.96.01 ii) For trusses spanning above 12.00 m and up to 20 .00 m MT 7.94 61675 489700.0096.01 ii) For trusses spanning above 12.00 m and up to 20 .00 m MT 7.94 61675 489700.00

96.02 ii) For trusses spanning above 20.00 m and up to 30 .00 m MT 1586.90 63115 100157194.00

97.00 M.S. structural works with hollow sections ( square or rectangular shape) conforming to IS: 806-1957 & IS:1161-1958) connected to one another with bracket, gusset, cleat as per

design, drawing & direction of Engineer-in-Charge complete including cutting to requisite shape & size, fabrication including metal arc welding conforming to IS: 816-1956 & IS:

9595 using electrodes of approved make and brand conforming to IS:814- 1957, haulage, hoisting and erection all complete. The rate includes the cost of all M.S. Hollow section,

all consumables such as electrodes, gas and hire charges of all tools and plants and labour reqired for execution and all incidental chages (such as electricity, labour insurance)

etc. complete. Payment to be made on the basis of calculated weight of structural memebrs of MS Holow Section as specified in relevent IS code in finished work. Payment for

gusset, bracket, cleat may be made by adding the actual weight of such items with weight of finished structural members. The rates are considered for a hight of erection 8 m. /

2nd floor level from the ground. Add 1.5 % extra over the rate for each additional floor or 4m. beyond the initial 8 m. or part thereof.

97.01 b) Span beyond 12 Mtr and up to 20.00 Mtr MT 126.52 61970 7840444.00

97.02 c) Span beyond 20 Mtr and up to 30 Mtr MT 6.00 64017 384102.00

98.00 M.S. works in framed gratings of window etc.made of round or square bars and frame work or M.S. flats (with the bars securely fixed to the flat bar frame ) with or without

intermediate flat bar stiffener and fixed with necessary screws etc. complete , as directed.

98.01 In ground floor. Qntl 22.00 6299 138578.00

99.00 (a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs

in ground floor.99.01 (ii) Grill weighing above 16 Kg./sq.mtr and above Qntl 504.96 7046 3557948.00

(MODE OF MEASUREMENT):-

The weight of grill per sq.m. will be determined by taking the physical weight of fabricated grill and dividing the same by covered area of the same.

N.B. No shop priming will be allowed to facilitate inspection of workmanship. Weight of grill is to be taken after final grinding and finishing the weld

100.00 M.S. gate of Jail type as per approved design made of strong M.S. frame work, intermediate stiffeners and round / square bars or angles. M.S. sheet (not less than 14 gauge)

gussets, cleats etc. including necessary riveting, bolting, welding, locking and hanging arrangements, fitting and fixing complete as per direction of the Engineer-in -charge.

In ground floor. Qntl 104.96 7566 794127.00


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

101.00 (a) Supplying, fitting and fixing steel rolling shutter profile type with 18 B.G . of approved type steel latche section 75mm wide, fitted with coil wire spring to necessiate the fitting of

required Nos. of C.I. Pulleys on heavy type solid drawn seamless steel tube complete with locking arrangements both inside and outside specially builtup side guide channels

including providing a hood for the steel rolling shutter in the room, painting two coats of approved aluminium paint over a coat of red lead primer complete

Sqm 126.89 2170 275351.00

1. (Measurement will be made on the area of opening covered by the rolling shutter corrected upto 2 decimal.)

2. Payment of painting to be separately.101.01 (b) Supplying fitting and fixing steel rolling grills link type, shutter with 18 B.G .of approved type steel to the section 75mm wide, fitted with coil wire spring to necessiate the fitting of

required Nos. of C.I. Pulleys on heavy type solid drawn seamless steel tube complete with locking arrangements both inside and outside specially builtup side guide channels

including providing a hood for the steel rolling shutter in the room, painting two coats of approved aluminium paint over a coat of red lead primer complete.

Sqm 56.55 2833 160206.00

(Measurement will be made on the area of opening covered by the rolling shutter corrected upto 2 decimal.)

102.00 Supplying, fitting and fixing windows and ventilators with or without integrated grills conforming to IS 1038-1975 and manufactured from rolled steel sections conforming to IS 7452-

1974 with non-friction projecting type, box type hinges, glazing clips, lugs locking bracket, handle plate etc, including hoisting in position, straightening if required, fixing lugs in

cement concrete ( 1:2:4) with stone chips 20 mm down cutting holes and mending good damages to match with existing surface complete in all respect excluding glazing.

In Ground floor

Flash butt welded windows and ventilators (No shop priming will be allowed to facilitate inspection of workmanship)

Without integrated grills.

102.01 (a) Fixed type steel windows as per IS sizes with horizontal glazing bars. Sqm 72.26 1214 87724.00

102.02 (b) Openable steel windows as per IS sizes with side hung shutters and horizotal glazing bars. [The extra rate admissible for the openable portion only] Sqm 614.31 1663 1021598.00

Additional Floor upto 4th Floor

102.03 (a) Fixed type steel windows as per IS sizes with horizontal glazing bars. Sqm 101.26 14.57 1475.00102.03 (a) Fixed type steel windows as per IS sizes with horizontal glazing bars. Sqm 101.26 14.57 1475.00

102.04 (b) Openable steel windows as per IS sizes with side hung shutters and horizotal glazing bars. [The extra rate admissible for the openable portion only] Sqm 638.31 19.96 12741.00

NOTE:

(1)Without the specific permission of the Superintending Engineer no work involving 1st class best Indian teak and Siliguri: Sal wood should be carried out.

(2) In case of of using under specified timber in frame, shutter etc. penal rate of reduction to a maximum of 50% will be made in such under specified timber work.

103.00 Supplying, fitting and fixing Stainless Steel railing consist of 38mm dia and 900mm height vertical balustrade at every two alternative steps, 50mm dia top rail, 3 (three ) nos 19mm

dia horizontal Strainless steel pipe and base/cover plate with Strainless Steel GRADE 304 containing 7.5% nickle (Interior Grade) Brushed/Mat finish, complete as per direction of

the Engineer-incharge. Weight of Strainless Steel railing per metre 6.5 Kg (approx) Mtr 1638.93 7677 12582066.00

104.00 Supplying, fitting & fixing fire resistant door frame conforming to IS:3614, tested and certified as per laboratory approved by Engineer-in-charge, of section 143 x 57 mm having built

in rebate made out of 16 SWG G.I.sheet (zinc coating not less than 120 gm/sqm) duly filled with vermuculite based concrete mix, suitable for mounting 120 minutes fire rated door

shutters. The frame is fitted with intumescent fire seal strip of size 10x4 mm (minimum) alround the frame and fixing with back plate bracket and anchor fastener of approved size

and make. Rubber door silencers should be provided on striking jamb.

Supplying, fitting & fixing fire resistant Door leaf of 46 mm thick fully flush double skin glazed fire resistant door shutters with or without vision lite, of 120 minutes fire rating

conforming to IS:3614 (Part-II), tested and certified as per laboratory approved by Engineer-in-charge, with suitable mounting on door frame, consisting of vertical styles, lock rail,

top rail 100 mm wide, bottom rail 200 mm wide, made out of 18 SWG G.I. sheet (zinc coating not less than 120 gm/ m2) duly filled heat-resistant phenolic resin bonded insulation

material (honeycomb craft) and fixing with necessary stainless steel ball bearing hinges of approved make. For pair of doors astragals has to be provided on the meeting stile for

both active and inactive leaf. Vision lite wherever applicable should be provided as per manufacturer recommendation with a beeding and screw from inside. The glass should be

6mm clear borosilicate fire rated glass of relevant rating.

All door and frames shall be finished with polyurethene aliphatic grade paint of approved colour including applying a coat of approved brand fire resistant primer. The door leaf and

frame shall have passed minimum 250 hours of salt spray test. Rate should include supply and installation complete as per direction of Engineer-in-charge.104.01 i) 2 hour Fire rated door single leaf of size (1200 mm x 2180 mm) Each 15.00 22523.00 337845.00

104.02 ii) 2 hour Fire rated door double leaf of size (1470 mm x 2170 mm) Each 79.00 29957.00 2366603.00

SECTION 1 : (G) CARPENTER'S WORKS


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

A.DOOR WINDOW FRAME

105.00 Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron

Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals).

105.01 (a) 1st class Best Indian teak. Cum 69.95 129513 9059434.00

105.02 Extra for Lifting charges for each additional floor Cum 75.18 200 15036.00

106.00 Supplying, fitting and fixing fibre reinforced polymer (FRP) Composite door frame as per approved section with glass fibre reinforced plastic moulded skins and a special sandwich

core, so as to impart monolitaheic composite structure as per approved technology of Department of Science and Technology (DST) to safisfy IS: 4020 door testing performance

criteria..

106.01 (ii) 66mm x 90mm Mtr 272.00 497 135184.00

B:- Door Window Shutter

107.00 Supplying solid flush type doors of commercial quality, the timber frameconsisting of top and bottom rails and side styles of well seasoned timber 65mmwide each and the entire

frame fitted with 37.5mm wide battens places both waysin order to make the door of solid core and internal lipping with Garjan orsimilar wood veneers using phenol formaldehyde

as glue etc. complete, includingfitting, fixing shutters in position but excluding the cost of hinges and otherfittings in ground floor.

107.01 (a) 35 mm thick shutters (single leaf) Sqm 3178.03 2659 8450382.00

108.00 Supplying solid flush type doors of deluxe decorative (both side) quality, conforming to I:S 2202 timber frame consisting of top and bottom rail and side styles of well seasoned

timber 65mm wide each and the entire frame fitted with 27.5mm wide battens places both ways in order to made the door of solid core and internal lipping with teak, mahogony or

rose wood approved decorative veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing the shutters in position but excluding the cost of hinges and other

fittings in ground floor:fittings in ground floor:

108.01 (a) 35mm thick shutters (single leaf) Sqm 266.87 3955 1055471.00

109.00 (a) Vision aperture (round or retangular in shape) with 7.4kg. Per sq.m./ 3mm thick glass pane with wooden beads. (Cost of glass panes and wooden beads will be paid

separately). Each 246.00 33 8118.00

110.00 Double leaf shuttering(note:- mode of measurement shall be made on the basis of area of shutter) sqm 1190.93 30 35728.00

111.00 Supplying, fitting & fixing fibre reinforced polymer (FRP) Composite door shutters as per approved design with glass fibre reinforced plastic moulded skins and a special sandwich

core, so as to impart monolitaheic composite structure as per approved technology of Department of Science and Technology (DST) to satisfy IS:4020 door testing performance

criteria. In ground floor.

111.01 (i) 32 mm thick Sqm 12.00 2763 33156.00

C:- Miscellenous Wood Work

112.00 Supplying, fitting, Fixing Fly / Mosquito proof nylon net on any type of window, door shutter frame with necessary fixing arrangements complete. Sqm 106.00 834 88404.00

113.00 Scantling upto 50mm wide and 12mm thick (chamfering or rounding) for ceiling/partion battens including fitting, fixing in position with washers, coach screws etc. complete.:

113.01 (a) Ordinary teak Sqm 7458.17 93 693610.00

114.00 Square or hexagonal mesh netting made with 18 B.W.G. galvanised wire, fitted and fixed complete as per design (excluding the supporting framework but including local sal wood

battens of size 37.5mmx25mm).

114.01 In ground floor.

114.02 (b) 25mm mesh Sqm 110.00 378 41580.00

115.00 Supplying fitting and fixing I.R.C. fabric mesh with covering battens including cost of screws etc complete (excluding the cost of battens). In ground floor.

115.01 (e) 75mm x 50mm x 2.7mm x 2.7mm. Sqm 15.00 230 3450.00


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

D. ACCESSORIES

116.00 Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction.

(Cost of concrete will be paid separately)

116.01 (a) 40mm X 6mm, 250mm Length Each 6588.00 29 191052.00

116.02 i) Hydraulic door closer of approved quality as per I.S.I. standard fitted and fixed complete.

116.03 (a) Heavy type (I.S.I. size 3) Each 84.00 1665 139860.00

117.00 Supplying anodised aluminium catch hook with eye fitted and fixed to shutter and chowkat complete of best quality:

117.01 (ii) 225mm long. Each 62.00 43 2666.00

118.00 Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated

screws:

118.01 (iv) 150mm long x 12mm dia. bolt. Each 1101.00 88 96888.00

118.02 (viii) 225mm long x 12mm dia. bolt. Each 537.00 114 61218.00

119.00 Anodised aluminium Aldrop / Sliding bolts of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 2681/66) fitted and fixed complete.

119.01 (ii) 250mm x 19mm dia. bolt. Each 27.00 287 7749.00

119.02 (v) 100 x 63 x 3.2mm. Each 756.00 72 54432.00

119.03 (ix) 125 x 75 x 4.0mm. Each 8.00 113 904.00

120.00 Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete:

120.01 (a) With continuous plate base (Hexagonal/ Round rod)

120.02 (iii) 100 mm grip x 12 mm dia rod. Each 610.00 85 51850.00120.02 (iii) 100 mm grip x 12 mm dia rod. Each 610.00 85 51850.00

120.03 (vii) 150 mm grip x 12 mm dia rod. Each 1758.00 111 195138.00

121.00 (a) Metallic magic eye of approved quality fitted and fixed complete. Each 2.00 54 108.00

121.01 (b) Supplying, fitting fixing Godrej type hydraulic (oil check) floor door spring, heavy duty double action with brass shoe, brass top centre aluminium top cover etc. complete set as

per direction of Engineer-in-charge. Each 4.00 3573 14292.00

122.00 Supplying wooden moulding slanting beat of size 37mm X 18mm (finished) of approved design to finish the joint between wooden frame of door/window with masonary in true line

and level fitted & fixed with adhesive and head less pins complete as per direction of Engineer -in-charge. mtr 140.00 109 15260.00

122.01 Teak wood beat

123.00 Supplying, fitting and fixing Godrej Multi Lock or equivallent . Each 5.00 136.00 680.00

124.00 Providing and fixing thermal insulation of ceiling (under deck insulation) with Resin Bonded Rockwool conforming to IS: 8183, density 48 kg/m3, 50m mm thick, wrapped in 200 G

Virgin Polythene bags fixed to ceiling with metallic cleats (50x50x3 mm) @ 60 cm and wire mesh of 12.5 mm x 24 gauge wire mesh for top most ceiling of building

Sqm 25.00 546.00 13650.00

125.00 Providing and laying roof insulation with 40 mm thick impervious sprayed, closed cell free Rigid Polyurethane foam over deck insulation conforming to IS - 12432 Pt. III (density of

foam being 40-45 kg/cum), over a coat of polyurethane primer applied @ 6-8 sqm per litre, laying 400 G polythene sheet over PUF spray in panels of 2.5 m x 2.5 m and embedding

with 24 G wire netting and sealing the joints with polymerized mastic, all complete as per direction of Engineer-in-ChargeSqm 3629.00 959.00 3480211.00

126.00 M.F. suspended ceiling made with 12.5 mm thick Gypsum plaster board including G.I. perimeter channel of 0.55 mm flush (having two flanges 20 mm and 30 mm respectively and

web 27 mm ) along with perimeter of ceiling with G.I. intermediate channel of 0.9 mm thick size 45 mmx15mm placed at 750 mm c/c with G.I. ceiling angle of size 25

mmx10mmx0.55 mm thick fixed to the ceiling with G.I. Cleat and steel expansion fastener ceiling section 0.55 mm thick of size 51.50 mmx26mm fixed to the intermediate channels

with the help of connecting clip and in the direction of perpendicular to the intermediate channel of 300 mm c/c 12.5 mm thick Gypsum plastered board are to be fixed under ceiling

section as above by machine screws. The boards are to be joined and finished with jointing compound, paper tape and application of top coat etc. as per the direction of Engineer-

in-charge. (The rate includes of cost of all materials including taxes, cost of accessories, fittings and fixtures, scaffolding and labour charges etc. complete) In ground floor

Sqm 297.00 1159.00 344223.00


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

127.00 Supplying, fitting and fixing of false ceiling framework with powder coated exposed G.I. grid suspension system (E-Grid T 2430/1510 or equivalent load carrying capacity with mid

span deflection not exceeding 1/360 span with hanger spacing of 1200mm c/c ) consisting of Main Runner 3600 mm long, Cross Tee 1200 mm / 600 mm long and Wall Angle. The

Wall Angle shall be fixed on PVC Dash Fasteners on the perimeter of the wall by steel screws with distance 300mm c/c. The Main Runners to be placed @ 1200 mm. The Cross

Tee 1200mm will be inserted in the pre-cut slots of Main Runner at regular interval of 600 mm to form a modular grid of 1200mm X 600mm. Additional Cross Tees of 600 mm shall

be placed perpendicular to the Cross Tee 1200 mm long to finally form a grid of 600 mm X 600 mm. Grid of module size 600 mm X 600 mm shall be supported by 6 mm dia G.I.

wire from purlins / soffit. all complete as per drawing & directions of Engineer-in-charge. Sqm 2537.53 341 865298.00

128.00 Supplying, fitting and fixing of false ceiling framework with powder coated exposed G.I. grid suspension system (E-Grid U-1520 or equivalent load carrying capacity with mid span

deflection not exceeding 1/360 span with hanger spacing of 1200mm c/c ) consisting of Main Runner 3600 mm long, Cross Tee 1200 mm / 600 mm long and Wall Angle. The Wall

Angle shall be fixed on PVC Dash Fasteners on the perimeter of the wall by steel screws with distance 300mm c/c. The Main Runners to be placed @ 1200 mm. The Cross Tee

1200mm will be inserted in the pre-cut slots of Main Runner at a regular interval of 600 mm to form a modular grid of 1200mm X 600mm. Additional Cross Tees of 600 mm shall be

placed perpendicular to the Cross Tee 1200 mm long to finally form a grid of 600 mm X 600 mm. Grid of module size 600 mm X 600 mm shall be supported by 6 mm dia G.I. wire

from purlins/ soffit all complete as per the drawing & directions of Engineer-in-charge. Sqm 12363.80 467 5773895.00

129.00 Supplying fitting & fixing concealed False ceiling Framework with G.I. Section (perimeter channels having one flange of 20 mm. and another flange of 30 mm. with thickness of 0.55

mm. and web of length 27 mm., along the perimeter of the ceiling, screws fixed to the wall with help of nylon sleeves or PVC dash fastners @ 610 mm c/c. then suspend G.I.

intermidiate 'C' section with web 90 mm. and flanges of 15 mm. each from soffit @ 1200 mm c/c with ceiling angle of size 25 mm. X 10 mm. X 0.55 mm. fixed to soffit G.I. Cleat and

Steel expansion fasteners. Ceiling section of 0.55 mm. thickness having web of 51.5 mm. and two flanges of 26 mm. each with lips of 10.55 mm., are then fixed on to the

intermediate channel with the help of connecting clips in the direction perpendicular to the intermidiate channel @ 610 mm c/c) with fully threaded fiber cement screws @ 300 mm

c/c. all complete as per the drawing and direction of Engineer-in-Charge. Section specification :- Perimeter Channel :- 30 mm X 20 mm X 27 mm, thickness 0.55 mm (min),

Intermidiate Channel :- 15 mm X 90 mm, thickness 0.90 mm (min), Ceiling Section :- 51.5 mm X 26 mm X 10.55 mm, thickness 0.55 mm (min), Ceiling Angle :- 25 mm X 10 mm,

thickness 0.55 mm (min). Sqm 1045.65 351 367023.00

130.00 Supplying,fitting & fixing in position suspended false ceiling with frame work of aluminium hollow section of size 50mm X 25mm (2.0mm thickness) combined with aluminium corners130.00 Supplying,fitting & fixing in position suspended false ceiling with frame work of aluminium hollow section of size 50mm X 25mm (2.0mm thickness) combined with aluminium corners

of size 38mm X 25mm, suspended by aluminium hollow tube section of size 38mm X 25mm having size of 600mm X 600mm ceiling with aluminium composit panels (ACP) - Interior

grade of thickness 3.0mm comprising of proctective film, polyester coating, primer, aluminium coil, adhesive film, polyethylene core again with one layer adhesive film, aluminium

bottom coating and finally service coating as per manufacturer's specification finished with aluminium screw and silicon sealent complete in all respect including all incidental

charges etc. as per direction of Engineer-incharge Sqm 570.00 2287 1303590.00

131.00 A. Exposed False-ceiling Work --

131.01 (d) Supplying, fitting & fixing OW Acoustic Board (mineral Fibre Acoustic Ceiling Tiles) of approved patern and size595mm X595mm with NRC value > 0.65 should be placed in the

Grid module to form a false ceiling all complete as per drawing & direction of Engineer - in- Charge. False ceiling with

(i)15mm thick OW Acoustic Board/Tiles. Sqm 2214.43 727 1609891.00

131.02 (e) Supplying ,fitting & fixing Eco-friendly, Water Resistance and Incombustable Calcium Silicate board/tiles (Density >900 Kg per Cu.M.) of approved design and brand placed in

the grid module to form a false ceiling all complete as per drawing & direction of Engineer - in- Charge. False ceiling with

(i) 6mm thick square edged Calcium Silicate tiles (size 595mm X 595mm) Sqm 265.37 351 93145.00

131.03 (f) Supplying ,fitting & fixing Eco-friendly, Humidity Resistant and Incombustable Light Weight Calcium Silicate board/tiles (Density < 900 Kg per Cu.m.& Sound absorption NRC -

0.1 to 0.75)Conforming to BS 476 (Part IV, VI & VII) of approved design and brand placed in the grid module of size 600mm X 600mm to form a false ceiling, all complete as per

drawing & direction of Engineer - in- Charge. False ceiling with

15mm X 10mm Densified tegular edged Light weight Calcium Silicate tiles Sqm 11628.30 847 9849170.00

131.04 (g) Supplying ,fitting & fixing Eco-friendly, Moisture Resistant and Incombustable Gypsum plaster board/tiles (Density > 700Kg per Cu.m) conforming to IS 2095- Part 1, 2011 of

size 595mm X595mm of approved design and brand placed in the Grid module to form a false ceiling all complete as per drawing & direction of Engineer - in- Charge. False ceiling

with

(ii) 12.5mm thick Square edged Gypsum Plaster Board / tiles Sqm 3350.70 388 1300072.00


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

132.00 B. Concealed False-ceiling Work --

(f) Supplying ,fitting & fixing Eco-friendly,Moisture Resistance and Incombustable Gypsum plaster board ( Density > 700Kg per Cu.m.) confirming to IS 2095- Part 1, 2011 of

approved design and brand finished with gypsum jointing compound to form a joint less false ceiling all complete as per drawing & direction of Engineer - in- Charge. False ceiling

with

132.01 (ii) 12.5mm thick tapered edged Gypsum Plaster Board Sqm 1155.06 409 472420.00

G. WALL PANELLING:

133.00 Wall panelling / partition with Melamine faced 3 layered flat pressed wood particle board of approved make and brand as per direction of Engineer - in - Charge of requisite grade

bonded with phenol formaldehyde synthetic resin conforming to IS: 848 - 1974 (excluding the cost of supporting frame work and teak wood battens / lipping)

133.01 (A) Plain : Conforming to IS: 3087 - 1985

133.02 b) 12 mm thick. Sqm 901.00 796 717196.00

134.00 (B) Prelaminated particle board conforming to IS: 3087 - 1985 and IS 12823 - 1990.

134.01 i) One side decorative laminated

134.02 a) Exterior grade

134.03 12mm thick Sqm 415.00 1070 444050.00

135.00 (b) Interior Grade

135.01 12mm thick Sqm 987.20 1038 1024714.00

136.00 (ii) Both side decorative laminate

136.01 (a) Exterior grade136.01 (a) Exterior grade

136.02 12mm thick Sqm 545.00 1292 704140.00

137.00 (b) Interior Grade

137.01 12mm thick Sqm 1648.82 1083 1785672.00

138.00 Supplying, fitting and fixing boiling water proof ply conforming to IS: 710-1977 bonded with phenol formaldehyde synthetic resin conforming to IS: 848-1974 of approved make and

brand fitted and fixed as per design as per approval and direction of Engineer-in- Charge. [excluding the cost of supporting frame work and teak wood batten/Lipping] In Ground

Floor

138.01 (iii) 9mm Sqm 402.00 1290 518580.00

138.02 (iv) 12mm Sqm 366.00 1709 625494.00

139.00 Supplying, fitting and fixing boiling water resistant ply conforming to IS: 303-1989 bonded with phenol formaldehyde synthetic resin of approved make and brand fitted and fixed as

per design as per approval and direction of Engineer-in-Charge.[excluding the cost of supporting frame work and teak wood batten/Lipping] In Ground Floor

139.01 (iii) 9mm Sqm 345.00 1028 354660.00

139.02 (iv) 12mm Sqm 309.00 1290 398610.00

140.00 Supplying, fitting and fixing boiling water proof block board conforming to IS:1659-1990 conforming to IS:848-1974 of approved make and brand, fitted and fixed as per design as

per direction of Engineer-in-charge. [Excluding the cost of supporting frame work and teak wood batten/Lipping]. In Ground Floor

140.01 (ii) 19mm Sqm 235.00 1827 429345.00

140.02 (iii) 25mm Sqm 267.00 2456 655752.00

141.00 Partition with soft insulation board (of 12mm thick) as per design fitted and fixed complete (excluding the supporting framework but including necessary teak wood battens of size

40 mm & 25 mm). In Ground Floor141.01 (b) Sal Local Sqm 300.00 467 140100.00


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

142.00 Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, consisting of floor and ceiling channel 50/51 mm wide having equal flanges of 32 mm

and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or

metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling

channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor

fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and

ceiling channels at the spacing of 300 mm centre to centre.The boards are to be fixed to the frame work with joints staggered to avoid through cracks, M.S. fixing channel of 99

mm width (0.9 mm thick having two flanges of 9.5 mm each) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including

jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x 0.5 mm), joint finisher and two coats of primer

suitable for board as per manufacture’s specification and direction of engineer in charge all complete

142.01 ii) 70 to 71 mm overall thickness partition using 10 mm thick High pressure steam cured non-Asbestos multipurpose Cement Board reinforced with cellulose fibre

(Density>1250kg/m3) manufactured through autoclaving process as per IS: 14862 with suitable fibre cement screws. Sqm 1020.00 1474.00 1503480.00

143.00 Supplying and fitting in all places of wall panelling to all heights and fixing on pre- framed existing frame work grid with glass wool of 50mm thick having density of 48 Kg per cum. to

be inserted into the pre - fabricated slot covered the glass wool by marking cloths treated with Naptha @ 0.07 Ltr.per Sq.m. of cloths. Finally 12.5mm thick gypsum Fulton board

having size 595mmX595mm fitted & fixed into the pre-fabricated grid and covered the all perifirial gaps of fulton board by self additive fibre tape with necessary filler if required,

complete in all respect as per direction of the Engineer-in-charge. Sqm 460.00 1182 543720.00

144.00 Supplying fitting, fixing decorative lamination conforming to IS: 2046 : 1995 as per approved make, brand, finish and thickness with fitting, fixing the same on Particle/MDF / Ply

Boards with recommended / approved adhesive with proper clipping the sides for better attachment as per direction of Engineer-in-charge.The rate includes the cost of labour,

adhesive and all incidental charges thereof. In ground floor

Glossy/Matt/Suede excluding surface texture or metallic lustre.Glossy/Matt/Suede excluding surface texture or metallic lustre.

144.01 (i) Thickness of laminate 1.5mm Sqm 243.54 802 195319.00

144.02 (ii) Thickness of laminate 1 mm Sqm 4415.13 688 3037609.00

145.00 (A) Partition of commercial ply as per design fitted and fixed complete (excluding the supporting framework but including necessary teak wood battens of size 40mmx 25 mm): In

Ground Floor

145.01 (iii) 12mm thick Sqm 415.00 1008 418320.00

146.00 Partition of teak veneer [1 mm] as per design fitted and fixed complete (excluding the supporting frame work & necessary teak wood battens): In ground floor

146.01 (i) 4mm thick commercial quality Sqm 3240.70 465 1506926.00

147.00 Wall paneling with Gypsum Plaster Board of 12.5 mm thick fitted to G.I. channel of 55 mmx50 mm placed at 300 mm c/c in horizontal direction and metal stand 55 mmx48 mm

placed @900 mm c/c in vertical direction connected with G.I. connecting clips. 12.5 mm thick Gypsum plaster based are to be fixed with G.I. channel by machine screws. The

boards are to be joined with jointing compound and fibre tape and finished with top coat etc the rate includes the cost of all materials, labour charges including scaffolding etc.

complete as per direction of the Engineer-in-charge. In ground floor Sqm 445.00 994 442330.00

H : ADDITIONAL RATE

148.00 Add extra over the rate of ground floor for each addl. Floor upto 4th floor. Sqm 445.00 29 12905.00

149.00 Extra for Teak wood corner moulding (50mm x 12mm) of panel partition or panel door. Each 1560.00 67 104520.00

SECTION 1 : (I)-PLASTERING, POINTING ETC.B:- Miscelleneous Item

A:- ORIGINAL WORK

150.00 Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip

course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface]

150.01 (i) With 1:6 cement mortar

150.02 (b) 20 mm thick plaster Sqm 59196.36 151 8938650.00

150.03 (c) 15 mm thick plaster Sqm 105554.39 133 14038734.00

151.00 (ii) With 1:4 cement mortar

151.01 (c) 10 mm thick plaster Sqm 46083.87 121 5576148.00


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

152.00 Neat cement punning about 1.5mm thick in wall,dado,window sill,floor etc. Sqm 415.55 34 14129.00

153.00 Making V-groove line ( 12 mm wide,12 mm deep) in plastered surface. 100 Mtr 1608.73 580 933063.00

154.00 Labour for Chipping of concrete surface before taking up Plastering work. Sqm 46083.87 21 967761.00

C:- ADDITIONAL RATE

155.00 Extra for each additional floor over the rate for ground floor items.

155.01 (i) External plaster

155.02 (a) Upto 4th floor Sqm 83660.81 4 334643.00

155.03 (ii) Internal plaster

155.04 (a) Upto 4th floor Sqm 138668.64 4 554675.00

SECTION 1 : (J)-WHITE WASH, COLOUR WASH, DISTEMPER

A:- ORIGINAL WORKS

156.00 White washing including cleaning and smoothening surface thoroughly.

All floors :

156.01 (c) Three coats (on new works only). % Sqm 1108.68 2001 2218469.00

157.00 Colour washing with "ELLA" with a coat of white wash priming including cleaning and smoothening surface thoroughly :

157.01 (i) Internal (all floors)

157.02 (b) Two coats % Sqm 86.68 2135 185062.00157.02 (b) Two coats % Sqm 86.68 2135 185062.00

158.00 Cement washing including cleaning and smoothening surface thoroughly (cement to be used @15 kg./100 sq.m. of surface for one coat and @25 kg./100 sq.m of surface for two

coats):158.01 External surface (Ground floor)

158.02 (b) Two coats (on new works only). % Sqm 143.47 1424 204301.00

159.00 Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer's specification) including cleaning and smoothning of

surface. Two Coats Sqm 113490.70 70 7944349.00

160.00 Synthetic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer's specification) including cleaning and smoothning of

surface. Two Coats Sqm 18130.81 68 1232895.00

161.00 Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured(matt finish) or smooth finish

acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC.

161.01 In Ground Floor:

161.02 (b) Two Coats % Sqm 580.95 4510 2620085.00

162.00 Dry Distemparing to interior walls or ceiling including cleaning, washing, smoothening surface

(a) Two Coat Sqm 2114.81 49 103626.00

163.00 Protective and Decorative Textured exterior high class matt finish paint of approved quality, composed of special Tharmoplastic Resin containing fine crystalline additives derive

from Granite as per manufacturer's specification and as per direction of EIC to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and

all incidental charges but excluding the cost of primer.

163.01 In Ground floor Sqm 64080.26 101 6472106.00

163.02 Two Coat

N.B. This item is to be selected only with written permission of Superintending Engineer for very resticted and small areas of a building.

164.00 Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of EIC to be applied over acrylic primer as

required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer.


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

164.01 In Ground floor (Two Coat)

164.02 b) Super Protective 100% Acrylic Emulsion. Sqm 210.00 84 17640.00

N.B. The items 19(b) & 19(c) are to be selected only with written permission of Superintending Engineer for very resticted and small areas of a building.

165.00 Add extra for each additional floor over the rate for ground floor on items.

165.01 External surface

165.02 (i) Upto 4th floor % Sqm 826.19 71 58659.00

166.00 Rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick) Sqm 1042.43 122.00 127176.00

166.01 Add extra for each additional floor over the rate for ground floor for the above item when used on External Surface

166.02 (i) Upto 4th floor 100 Sqm 1344.61 72.00 96812.00

SECTION 1 : (K)-PAINTING, VERNISHING ETC.

167.00 (A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the

surface, if necessary :

167.01 (a) On timber or plastered surface :

With super gloss (hi-gloss)

(iv) Two coats (with any shade except white) Sqm 400.00 81 32400.00

167.02 (b) On steel or other metal surface :

167.03 With super gloss (hi-gloss) -167.03 With super gloss (hi-gloss) -

167.04 (iv) Two coats (with any shade except white) Sqm 3497.63 79 276313.00

168.00 Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific

instruction of Superintending Engineer): (Two coats)

168.01 ii) Luxury Quality Sqm 100.00 70 7000.00

169.00 French polishing to wood work including preparing surface (ordinary gloss)

169.01 (a) On new wood work Sqm 3845.05 467 1795638.00

170.00 Polyurethane Polishing to woodwork with required colour as approved by Engineer-in-Charge with preparing surface including scaffolding and hire charges of compressor machine

including cost of filler and hardener material such as P. U. Sealing, P. U. Top coat (Matt/Glossy), Thinner, Spirit etc. and inclusive of all operation, material and labour complete as

per direction of Engineer-in- Charge. Sqm 560.00 837.00 468720.00

171.00 Melamine finish coating over polished wooden surface after preparing the surface as per decision and direction of Engineer-in-Charge. Sqm 3954.17 75 296563.00

SECTION 1 : (L)-GLAZIER'S WORK

A: ORIGINAL WORKS:

172.00 Supplying best Indian Sheet glass 5 mm thick including cutting to required sizes,setting on putty bases and fitted and fixed with teak glazing beads (19 mm x 12 mm) including putty

and nails as necessary complete. (In all floors for internal wall & upto 6 m height for external wall)Sqm 105.00 948 99540.00

C: ADDITIONAL WORKS:

173.00 Extra for fixing glass panes in steel window. Sqm 25.00 67 1675.00

SECTION 1 : (M)-DRAIN, DOWN PIPES, CHIMNEY ETC.


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

174.00 Supply fitting, fixing cast iron down pipes conforming to IS:3989-1970 and IS:1729-1964 in position with necessary clamps, nails including making hole in wall, floor etc. and cutting

trenches in any soil through masonry concrete structures etc. if necessary and mending good damages including joining with jointing materials complete.[ Payment will be made on

centre line measurement of the total pipe line including specials. Payment for specials will however be paid separately ].

174.01 (i) 75 mm. Dia. (Internal) Mtr 100.00 502 50200.00

174.02 (ii) 100 mm. Dia. (Internal) Mtr 1500.00 572 858000.00

174.03 (iii) 150 mm. Dia. (Internal) Mtr 200.00 966 193200.00

175.00 Supplying fitting fixing C.I. Specials of down pipes in position with clamps nails etc. with jointing materials including cutting holes in masonry or concrete, mending good damages

complete.

175.01 (D)(1) C. I Bend of down pipe (Without door)

175.02 (i) 75 mm. Dia. Each 70.00 382 26740.00

175.03 (ii) 100 mm. Dia. Each 80.00 468 37440.00

175.04 (iii) 150 mm. Dia. Each 100.00 812 81200.00

176.00 (E) C. I shoe of down pipe.

176.01 (i) 75 mm. Dia. Each 70.00 366 25620.00

176.02 (ii) 100 mm. Dia. Each 80.00 403 32240.00

176.03 (iii) 150 mm. Dia. Each 100.00 518 51800.00

177.00 Supplying, fitting, fixing C.I Grating (Heavy type).

177.01 (a) Up to 100 mm Square or 100 mm Dia. Each 70.00 69 4830.00

177.02 (b) Above 100 mm and upto 150 mm Square or round. Each 180.00 108 19440.00

178.00 G.I. Rain water spout 75 mm. Dia. And 600 to 750 mm. Long supplied fitted and fixed complete with two coats of paint to both exposed portion. Each 20.00 142 2840.00

179.00 Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches

in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc)

complete.

179.01 A) UPVC Pipes:

179.02 (i) 75 mm. Dia. mtr 1050.00 188 197400.00

179.03 (ii) 110 mm. Dia. mtr 560.00 251 140560.00

179.04 (iii) 160 mm. Dia. mtr 410.00 485 198850.00

179.05 B) UPVC Fittings:

179.06 a) Plain Tee

179.07 (i) 75 mm. Dia. Each 105.00 102 10710.00

179.08 (ii) 110 mm. Dia. Each 30.00 172 5160.00

179.09 (iii) 160 mm. Dia. Each 20.00 507 10140.00

179.10 b) Plain Y

179.11 (i) 75 mm. Dia. Each 105.00 125 13125.00

179.12 (ii) 110 mm. Dia. Each 30.00 223 6690.00

179.13 (iii) 160 mm. Dia. Each 20.00 579 11580.00

179.14 c) Bend 87.5 degree

179.15 (i) 75 mm. Dia. Each 105.00 95 9975.00

179.16 (ii) 110 mm. Dia. Each 30.00 160 4800.00

179.17 (iii) 160 mm. Dia. Each 20.00 404 8080.00

179.18 d) Shoe

179.19 (i) 75 mm. Dia. Each 105.00 78 8190.00

179.20 (ii) 110 mm. Dia. Each 30.00 111 3330.00

179.21 (iii) 160 mm. Dia. Each 20.00 305 6100.00


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

SECTION 1. BUILDING WORKS (N) THATCH, MUD AND BAMBOO WORKS

180.00 Strong bamboo frame work (for thatched roofing) with 75 mm. dia full bamboo rafters spaced at 350 mm. centres and tied with transverse bracings at 380 mm. spacing (each

bracing consisting of a pair of quarter bamboo, one at top and the other at the bottom of the rafters) fitted and fixed in position complete. Sqm 270.00 223 60210.00

181.00 Single durma mat lining (over bamboo roof frame) fitted and fixed complete Sqm 270.00 60 16200.00

182.00 Bamboo walling made of crushed bamboo or split bamboo or bamboo twigs(kanchis) as directed and tied with necessary stiffners of split bamboo (in pairs) made of 100mm dia.

Bamboo fitted and fixed complete (but excluding the cost of supporting frame work) Sqm 460.00 108 49680.00

183.00 Mud pluster (25 to 37.5) mm. thick with prepared mixture of earth and cowdung (10:1) with admixture of straw chopping and finishing smooth with lipping of cowdung and earth

(1:4):183.01 (a) In walls or floors Sqm 500.00 25 12500.00

183.02 (b) In ceilings Sqm 230.00 25 5750.00

184.00 Mud lipping with of cowdung and earth mixture (1:4) :

184.01 (a) In walls or floors Sqm 500.00 36 18000.00

184.02 (b) In ceilings Sqm 400.00 61 24400.00

SECTION 1. BUILDING WORKS (P) SOLING, EDGING AND METALLING

185.00 Providing and fixing at or near ground level precast cement concrete in kerbs (size: 410 mm x 310 mm x width 150 mm at bottom with circular nosing at top) (Nano kerb) of cement

concreat M25 Grade without reinforcement, fixing as per approved pattern and setting in position at site after preparing the bed grade and slopes by laying Cement concrete with

jhama khoa (1:4:8) as per specification and direction of Engineer-in-Charge including filling of joints with 10 mm thick cement morter (3:1) and back filling the vertical piece properlyjhama khoa (1:4:8) as per specification and direction of Engineer-in-Charge including filling of joints with 10 mm thick cement morter (3:1) and back filling the vertical piece properly

with earth duly compacted and curing the morter joints for atleast 3 days including cost and carriage of all materials complete. Mtr 25.00 942.00 23550.00

SECTION 1 : (R)-ALUMINIUM WORKS

186.00 Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS: 732-1983 and IS: 1285- 1975; Annodized (with required film thickness and specified

colour / natural) matt finished conforming to IS: 1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed /

certified make and brand as per direction of Engineer - In- Charge. (Payment will be made on finished length of the work).

186.01 (A) In 10-12 Micron thickness Annodizing film

186.02 I) Natural white

186.03 a) 2- track sliding window

186.04 i) Bottom frame Metre 260.00 218 56680.00

186.05 ii) Top and side frame Metre 300.00 195 58500.00

186.06 b) 3- track sliding window


186.08 ii) Top and side frame. Metre 160.00 270 43200.00

186.09 c) 4- track sliding window



186.12 d) Shutter for all track sliding window.

186.13 i) Bottom & Top member Metre 60.00 117 7020.00

186.14 ii) Style side member. Metre 120.00 119 14280.00

186.15 iii) Interlock member. Metre 60.00 148 8880.00

186.16 e) Casement window ( 40 mm Depth series)

186.17 i) Outer frame. Metre 200.00 157 31400.00

186.18 ii) Mullion. Metre 80.00 222 17760.00

186.19 iii) Shutter. Metre 160.00 154 24640.00

186.19 iv) Glazing clip. Metre 320.00 42 13440.00


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

186.20 v) Cleat angle. (Non-annodized) Metre 15.00 263 3945.00

186.21 f) Casement window ( 34 mm Depth series)


186.23 ii) Mullion. Metre 100.00 193 19300.00




186.26 g) Fixed glazing.

186.27 i) Top, bottom and side member. Metre 100.00 321 32100.00

186.28 ii) Mullion. Metre 140.00 339 47460.00

186.29 iii) Glazing clip. Metre 120.00 50 6000.00

186.30 h) Louvered window.


186.32 ii) Louvered Section. Metre 160.00 658 105280.00

186.33 iii) Cleat angle ( Non-annodized). Metre 400.00 263 105200.00

186.34 i) Fixed partitions.

186.35 Unsupported length of vertical member upto 1.5 mtr. Height of both ends of vertical member restrained but panels within 0.9 sq.m.)

186.36 i) Top , bottom & side member. Metre 310.00 321 99510.00

186.37 ii) Intermediate member. Metre 160.00 339 54240.00


186.38 j) Fixed partitions.

186.39 (Unsupported length of vertical member upto 1.5 mtr. Height of both ends of vertical member restrained but panels within 0.9 sq.m.)




186.42 k) Movable door shutter.

186.43 i) Door frame. (Top & sides). Metre 160.00 315 50400.00

186.44 ii) Shutter :

186.45 Top rail. Metre 80.00 304 24320.00

186.45 Bottom rail. Metre 80.00 448 35840.00

186.46 Lock rail Metre 80.00 377 30160.00

186.46 Door vertical. Metre 190.00 332 63080.00

186.47 Glazing cleap. Metre 410.00 50 20500.00

186.48 l) Rimless door.

186.49 i) Top & bottom rail. Metre 200.00 810 162000.00

186.50 II) Coloured








S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.





186.58 i) Bottom & Top member. Metre 60.00 131 7860.00





186.61 ii) Mullion. Metre 80.00 237 18960.00






186.65 ii) Mullion. Metre 100.00 210 21000.00




186.68 g) Fixed Glazing.Metre 100.00 334 33400.00186.69 i) Top, bottom and side member. Metre 100.00 334 33400.00

186.69 ii) Mullion. Metre 140.00 356 49840.00







186.75 (Unsupported length of vertical member upto 1.5 mtr. Height of both ends of vertical member restrained but panels within 0.9 Sq.m)





186.78 (Unsupported length of vertical member more than 1.5 mtr.or both ends of vertical member restrained but panels more than 0.9 Sq.m)







186.84 Top rail. Metre 80.00 318 25440.00


186.85 Lock rail Metre 80.00 400 32000.00


186.86 Glazing clip. Metre 410.00 48 19680.00




S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

186.89 (B) 15 Micron colour annodizing.











186.97 i) Bottom & Top member. Metre 60.00 137 8220.00





187.01 ii) Mullion. Metre 80.00 243 19440.00



Metre 150.00 263 39450.00187.02 v) Cleat angle. (Non-annodized) Metre 150.00 263 39450.00



187.04 ii) Mullion. Metre 100.00 217 21700.00




187.07 g) Fixed glazing.


187.08 ii) Mullion. Metre 140.00 363 50820.00







187.14 (Unsupported length of vertical member upto 1.5 mtr. Height of both ends of vertical member restrained but panels within 0.9 sq.m.)





187.17 (Unsupported length of vertical member more than 1.5 mtr.or both ends of vertical member restrained but panels more than 0.9 sq.m.)





S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.




187.22 Top rail. Metre 80.00 323 25840.00


187.23 Lock rail Metre 80.00 407 32560.00


187.24 Glazing clip. Metre 410.00 50 20500.00



187.00 Labour charge for fabrication and installation of composite door, window, partitions made from annodized extruded alloy aluminium sections for the following units:-

(A) Glazed aluminium sliding windows made of extruded and annodized alloy aluminium sectios, fabrications, including cutting to proper shape and size, drilling and aligning of

window shutter frame fitted with in built locking arrangements, sliding rollers and other necessary fittings, fixture, adhesives and joineries along with extruded neoprine or EPDM

gasketing in between window frame and masonry work (walls, column, beam.lintels etc.) as well as between glass and shutter frame for fixing glass and Polysulphide sealant and

in between shutter and window frame where necessary including cutting to requisite size and fixing glass as per drawing, specification and direction of EIC. The rate includes the

hire charge of all tools and plants, including all incidental charges, adhesive, joineries such as screw, cleat angle etc. but excluding the cost of extruded aluminium sections, glass,

neoprene / EPDM gasket, locking arrangement and rollers.

187.01 i ) 2 track sliding window. Sqm 80.00 696 55680.00

187.02 ii ) 3 /4 track sliding window. Sqm 60.00 941 56460.00

187.03 iii ) Openable / Casement window. Sqm 449.85 1117 502482.00

187.04 iv ) Fixed glazing. Sqm 882.99 768 678136.00

187.05 v ) Louvered window. Sqm 30.00 730 21900.00

187.06 vi) Add for special architectural feature, where members / sections are required to be bent as per requirement. Sqm 15.00 259 3885.00

188.00 (B) Partly glazed partly panelled or fully glazed single leaf alunminium swing door made of extruded and annodized alloy aluminium sections, fabrication including cutting to proper

shape and size, drilling and aligning, fitted with heavy duty hydraulic action floor sping placed in the floor with mending damages,with top pin assembly of approve make and brand,

fitted with in built locking arrangement, flush bolt, glazing clips and all other necessary fittings, fixtures, adhesives and joineries, cutting glass of approved make to requisite shape

and size fitting with dry set neoprene or EPDM gasketing, cutting to requisite shape and size panel board (prelaminated particle block) fixing them with glazing clips as per drawing,

specification and direction of Engineer in charge.Sqm 210.00 1281 269010.00

The rate includes the hire charge of all tools and plants, adhesive, joineries such as screw, cleat angle etc. but excluding the cost of extruded alumium sections, glass, panel

boards neoprene / EPDM gasket, locking arrangement, weather gasket / wool pile, floor spring, top pin, handle, tower bolt, glazing clips etc. (10% rate reduction has to be made for

swing doors or partitions where floor sping is not used. 10% enhancement of rate is to be made where door frame of extruded aluminium sections has to be fitted and fixed to

masonry wall. 5% rate enhencement may be allowed for double leaf swing door. Payment shall be made for the shutter area only exept where door frame is fixed the entire opening

shall be taken to consideration.Payment for door frame sections are to be paid seperately).

188.01 (C) Fully glazed single leaf reamless swing door made of anodized aluminium alloy extrusions fabrication after cutting to proper shape and size, drilling and aligning fitted with heavy

duty hydraulic action floor spring with top pin assembly and fitted with inbuilt locking arrangement and all other necessary fittings, fixture, adhesives and joineries, cutting the glass

to requisite shape and size mounting the edges for fitting the same with dry set neoprine/EPDM gasket.Sqm 160.00 1501 240160.00

The rate includes the hire charge of all tools and plants, adhesive, joineries but excludes the cost of extruded aluminium sections, glass, panel boards EPDM gasket, locking

arrangement, weather gasket / wool pile, floor spring, top pin, handle, tower bolt etc.

188.02 (D) Partly glazed and partly panelled partition or fixed glazing made of extruded and anodised alloy aluminium sections, fabrications after cutting to proper shape and size, drilling

and aligning fitted with inbuilt locking arrangement cutting the glass / board (prelaminated / particle / block) to requisite shape and size moulding the edges fitted and fixed glazing

clips and dry set neoprine /EPDM gasket, along with all other necessary arrangements for fixing the partition to walls, floors, beams, columns polysulphide sealant for water

proofing if necessary complete in all respect as per drawing and specifications and direction of the Engineer in charge.

The rate includes the hire charge of all tools and plants, adhesive, joineries such as screw, fastener but excluding the cost of extruded aluminium sections, EPDM gasket, glass,

board, glazing clips, locking arrangement, etc.


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

188.03 I) For partitions using section of size:

188.04 a) 63.50 mm x 38.10 mm Sqm 200.00 728 145600.00

188.05 b) 101.50mm x 44.45 mm Sqm 110.00 890 97900.00

188.06 Add extra for each Addl. Floor over the rate of Aluminium Work.

188.07 i) Upto 4th Floor Sqm 160.00 12 1920.00

189.00 Supplying heavy duty hydraulic double action floor spring along with top pin/set of pivots conforming to IS: 6315 or any approved make as per direction of Engineer in charge.Each Set 142.00 1729 245518.00

190.00 Supplying heavy duty top pin/set of pivots of local make and approved by the Engineer-in-charge. (This item to be provided where floor spring not used). Pair 370.00 297 109890.00

191.00 Supplying concealed type heavy duty PVC headed aluminium tower bolt for double leaf doors as per approved make and brand as per direction of Engineer-in-Charge.

191.01 (a) 200 mm long Each 406.00 61 24766.00

191.02 (b) 250 mm long Each 244.00 67 16348.00

191.03 (c) 300 mm long Each 30.00 74 2220.00

191.04 (d) 450 mm long Each 24.00 164 3936.00

192.00 Supplying PVC rollers for sliding windows as per direction of Engineer in charge. Each 260.00 14 3640.00

193.00 Supplying maruti lock (100mm) Pair 109.00 46 5014.00

194.00 Supplying EPDM gusket of approved make and brand as per direction of Engineer in charge.

i) For sliding windows

194.01 a) ' T' shaped EPDM gasket for frames. Metre 780.00 13 10140.00

194.02 b) 'U' shaped EPDM gasket for frames. Metre 1560.00 15 23400.00

194.03 ii) For openable / Casement windows

194.04 a) EPDM / weather gasket for outer frame and mullion. Metre 630.00 15 9450.00

194.05 iii) weather gasket / wool pile for door vertical. Metre 1260.00 19 23940.00

195.00 Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987.

195.01 i) 4mm thick clear glass. Sqm 40.00 398 15920.00

195.02 ii) 4mm thick coloured / tinted / smoke glass. Sqm 60.00 468 28080.00

195.03 iii) 5mm thick clear glass. Sqm 2990.96 526 1573245.00

195.04 iv) 5mm thick coloured / tinted / smoke glass. Sqm 864.91 585 505972.00

195.05 v) 6mm thick clear glass. Sqm 939.58 608 571265.00

195.06 vi) 6mm thick coloured / tinted / smoke glass. Sqm 70.00 661 46270.00

195.07 vii) 8mm thick clear glass. Sqm 2319.93 848 1967301.00

195.08 viii) 8mm thick coloured / tinted / smoke glass. Sqm 162.72 907 147587.00

195.09 ix) 10mm thick clear glass. Sqm 110.00 1082 119020.00

195.10 x) 10 mm thick coloured / tinted / smoke glass. Sqm 100.00 1141 114100.00

195.11 xi) 12mm thick clear glass. Sqm 205.00 1258 257890.00

195.12 xii) 12mm thick coloured / tinted / smoke glass. Sqm 235.00 1854 435690.00

195.13 xiii) 12mm thick cleared toughened glass coforming to IS: 2553-1992 (Part-II) Sqm 265.00 3235 857275.00

195.14 xiv) 12mm thick coloured / tinted / toughened glass coforming to IS: 2553-1992 (Part-II) Sqm 415.00 4118 1708970.00

196.00 Supplying stainless steel functional hinge for casement window as per approved brand as directed by Engineer- in -charge. (Natural White)

196.01 a) 250 mm long Each 4408.00 302 1331216.00

196.02 b) 300 mm long Each 32.00 332 10624.00

197.00 Supplying annodized aluminium extruded section box hinge for casement windows as per approved brand and make directed by Engineer- in - Charge.(Natural White) Each 496.00 44 21824.00


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

198.00 Supplying 4 lever mortice lock or any approved make and brand as per direction of the Engineer- in -Charge.

198.01 i) 150 mm. Each 105.00 378 39690.00

198.02 ii) 100 mm. Each 753.00 212 159636.00

198.03 iii) 75 mm. Each 70.00 157 10990.00

199.00 A) Supplying Aluminium casted body hydraulic door closer as per I.S.I. Each 137.00 635 86995.00

(B) Supplying 125 mm. Dia acrylic handle for aluminium door as per approved make & brand.

199.01 (a) Natural Colour Each 140.00 181 25340.00

199.02 (b) Colour Each 60.00 192 11520.00

200.00 (C) Supplying Heavy Duty Aluminium Handle (EBCO Type) (Natural White) Each 729.00 96 69984.00

201.00 (D) Supplying Aluminium casted body Butt Hinge (KOBRA type). (Natural white) Each 158.00 56 8848.00

202.00 (E) Supplying 250mm long Heavy Type Aluminium window Peg Stay (Natural White) Each 30.00 55 1650.00

203.00 (F) Supplying Zinc powered coated star lock (Natural White) Each 70.00 40 2800.00

Note:- For Colour be enhanced by 10%.

204.00 Filling the gap in between aluminium frame & adjacent RCC / Brick/ Stone work by providing weather silicon sealant over 6mm dia backer rod of approved quality as per

architectural drawings and direction of Engineer-in- Charge complete. Upto 5 mm depth and 5 mm widtharchitectural drawings and direction of Engineer-in- Charge complete. Upto 5 mm depth and 5 mm width

204.01 (a) Ground Floor Mtr 12737.10 69.00 878860.00

204.02 (b) Extra for each additional floor Mtr 11947.51 3.00 35843.00

205.00 Supplying, fitting & fixing of partly glazed partly panelled or fully glazed single leaf Aluminium swing door of all aluminium sections viz door frame ( top and side frame), shutter( top

rail, bottom rail, lock rail, door vertical) , glazing clip made of Aluminium Alloy Extrusions conforming to IS: 733-1983 and IS: 1285- 1975, annodized conforming to IS:1868-1983,

fitted with all other accessories viz. EPDM gusket,cleat, angle screws etc. including labour charges for fitting and fixing of aluminium door with door spring,/aluminium hinges, glass

/ Panel board all complete as per architectural drawings and direction of Engineer-in-charge. ( Excluding cost of glass/ panel board, door spring/ Al hinges, door closer, door stoper,

handle, tower bolt and locking arrangment etc) 10-12 Micron thickness Annodizing film Natural white Kg 600.00 385 231000.00

205.01 a) for unsupported length of vertical member upto 1.50m. height of both ends of vertical member restrained but panel with in 0.90 sqm Kg 700.00 391 273700.00

205.02 (unit wt of Top, bottom & side member @1.366 kg/m ; intermediate member @ 1.443 kg/m; glazing clip: 0.167 kg/m respectively)

[Note : for estimate purpose construction wing may consider weight of Al-Sections for Partition wall @ 5.7 Kg per Sq.M

205.03 b) For unsupported length of vertical member above 1.50m. height of both ends of vertical member restrained but panel above 0.90 sqm Kg 370.00 387 143190.00

(unit wt of Top, bottom & side member @ 1.978; intermediate member @ 2.055; glazing clip @ 0.167 kg/m respectively)

206.00 Supplying, Aluminium Grill with F channel frame of approved make and brand having ultimate tensile strength of 19 Kg/Sq.m. and modulus of elasticity 7000 kg/ sq.m., with 15

micron anodised fitted & fixed with necessary screws etc. complete as per direction of Engineer-in-charge. Grill made with 10 mm wide and 5.2 mm thick aluminium sheet having

expansion width of 66.00 mm and weight not less than 3.26 Kg/Sq.m. Sqm 1002.30 1571 1574613.00

207.00 Supplying profiles of required section made of Aluminium Alloy Extrusion conforming to IS: 732-1983 and IS: 1285-1975; Anodised with required film thickness and specified

colour/natural matt finished conforming to IS: 1868- 1983 for fabrication of Structural Glazing, Curtain Wall formed of basic sections of any ISI embossed/certified make and brand

as per direction of Engineer-in-charge. ( Payment will be made on finished length of the work). 15 micron colour anodising Structural glazing /Curtain Wall

207.01 i) Mulion & Transom (Weight @1.819 Kg per Meter) Mtr 4231.79 463 1959319.00

207.02 ii) Sub frame for fixing Glass (Weight @0.31 Kg per Meter) Mtr 929.47 81 75287.00

208.00 Supplying Glazing Silicon of approved make and brand for fixing of Glass on Sub-frame as per direction of Engineer-in-charge for Structural Glazing/Curtain wall etc. Glazing

Silicon for fixing Glass on Sub frameMtr 929.47 112 104101.00


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

209.00 Supplying Weather Silicone sealant of approved make and brand for fixing of grove line between the Glasses as per direction of Engineer-in-charge. for Structural Glazing/Curtain

wall. Weather Silicone sealant for filling the Grove line between Glasses or any other material for facial work Mtr 4231.79 57 241212.00

210.00 Supplying profiles of required sections made of aluminium alloy extrusion confirming to IS 732-1983 and IS 1285-1975 anodised with required film thickness and specified colour /

natural mat finished conforming to IS 1868- 1983 for fabrication of structural glazing, curtain wall formed of basic section of any ISI embossed / certified make and brand as per

direction of Engineer-in- Charge. (Payement will be made on finished length of the work). for Structural glazing / curtain wall with 15 micron Coloured Anodising

210.01 (i) Fixing Plate (Wt. @ 0.515 Kg per Mtr.) Mtr 1207.24 116 140040.00

210.02 (ii) Fixing cap (Wt. @ 0.342 Kg per Mtr.) Mtr 1207.24 77 92957.00

211.00 Labour charge for fabrication and installation of structural Glazing/Curtain Wall made from annodized extruded allooy aluminium sections for the following units:-

Structural Glazing made of extruded and annodized alloy aluminium sections, fabrications including cutting to proper shape and size, drilling including cost of brackets, fastener

bolt, mullion bolt, nuts & washers, maskin tape, double side adhesieve crosslink foam (used for guard of glazed silicon on sub-frame), tissue paper foam (used as filler between

sub-frame and under backing of weather silicon), screws and other necessary hardwares, fixing of glass as per drawing, specification and direction of Engineer-in-Charge. (The

rate includes hire charges of all tools and plants, including all incidental charges, adhesieve, joiners such as screw,cleate angle,etc. but excluded the cost of extruded aluminium

sections, glass, glazed silicon, weather silicon etc.) Sqm 1207.24 850 1026154.00

212.00 Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987;

(A) clear, toughened glass conforming to IS: 2553-1992 (part-II)212.01 (i) 6mm thick Sqm 160.00 957 153120.00

212.02 (ii) 8mm thick Sqm 220.00 1261 277420.00

212.03 (iii) 10mm thick Sqm 420.00 1863 782460.00

212.04 (B) coloured, toughened glass conforming to IS: 2553-1992 (part-II)212.04 (B) coloured, toughened glass conforming to IS: 2553-1992 (part-II)

212.05 (i) 6mm thick Sqm 165.72 1073 177818.00

212.06 (ii) 8mm thick Sqm 296.45 1729 512562.00

212.07 (iii) 10mm thick Sqm 905.07 2161 1955856.00

213.00 Supplying, fitting & fixing Step edging made of anodised Aluminium Alloy Extrusion (weight @ 0.494 Kg per Mtr.) Conforming to IS: 732-1983 and IS: 1285-1975, fixed to the steps

by strainless steel screws driven by electric drill as per specification & direction of Engineer-in-charge. Mtr 300.00 227 68100.00

214.00 Supplying, fitting & fixing aluminium stair nosing 28.92 mm x 31.92 mm x 1.27 mm thick of aluminium extruded sections of 0.172kg/metre length as per IS: 733 including GSM

screws and other incidental cost complete as per requirement and direction of Engineer-in-charge. All sections shall be natural/ golden colour anodized in AC 15 microns as per IS

5523 : 1983. Mtr 100.00 270.00 27000.00

215.00 Providing and fixing exterior quality Aluminium Composite Panel (ACP) wall cladding on existing Al. /MS frame work with GI brackets, ACP fixed on the existing frame work by

folding the edges of ACP panel ( Engraving the rear surface of ACP sheet) with CP angles, cleats and strainless Steel screws forming groves at the periphery of ACP panel. Such

grooves filled with foam and silicon sealant etc. complete with all materials (but including the cost of silicon sealant), labour, scaffolding and all other incidental charges e.g. VAT,

Labour cess etc complete in all respect as per specification and direction of Engineer-in-charge. (Mode of payment is on finished surface area of ACP)

215.01 (b) 4mm thick (0.50mm Al.+3.0mm LDPE +0.50mm Al. PVDF coating ) Sqm 1030.76 2878 2966527.00


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

SECTION 1 : (U) ADDITIONAL ITEMS

216.00 Supplying and laying true to line and level Anti-Skid, Full Body, Homogeneous & Granular finish Vitrified Tiles conforming to IS:15622-2006 & IS 4457-2007 and testing shall be

made in accordance with IS:13630 [Non- modular sizes for tiles with Skid resistance > 0.5, Mohr's hardness > 5.0, Staining resistance: Class-1, Water Absorption: E < 0.5%],

MOR > 35 N/sq.mm in Internal area of building e.g. Toilet Block, Passage, Corridor, Accessible Open Terrace etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement

slurry at back side of tiles using cement @ 2.91 Kg./Sqm or using Polymerised Adhesive (6 mm thick layer applied directly over finished artificial stone floor/ Mosaic etc without any

backing course) laid after application slurry using 1.75 Kg of cement per Sqm below mortar only, joints grouted with admixture of white cement and colouring pigment to match with

colour of tiles/ epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry

cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-

Charge. (White cement, synthetic adhesive and grout material to be supplied by the contractor).

216.01 a) In Ground Floor: Sizes-300 mm x300mm x10 mm with breaking strength > 1200 N Sqm 200.00 897 179400.00

216.02 b) In Ground Floor: Sizes-600 mm x600mm x10 mm with breaking strength > 1500 N Sqm 160.00 1580 252800.00

217.00 Supplying and laying true to line and level High Grip, Scratch resistant, Neutral to UV rays, Full Body Vitrified Tiles conforming to IS:15622-2006 & IS 4457-2007 and tested in

accordance with IS:13630 [Non- modular sizes for tiles with Skid resistance: 0.6, Mohr's hardness > 7.0, Staining resistance: Class- 1, Water Absorption E < 0.5%] & MOR >

35N/sq.mm and Breaking strength > 1500 N for Outdoor area of building e. g. Gang-way, Corridor, Driveway, Parking lots, Courtyards, Sloping ramps, Entrance lobbies, Patios,

Portico etc. set over necessary underlay and 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg./Sqm, joints grouted with admixture of white cement and

colouring pigment to match with colour of tiles and removal of wax coating of top surface of tiles with warm water and cleaning the tiles using soft and dry cloth complete including

the cost of materials, labour and all other incidental charges complete including backside slurry but excluding the cost of underlay and true to the manufacturer's specification and

direction of Engineer-in- Charge.

217.01 In Ground Floor: Sizes-300 mm x 300 mm x10 mm Sqm 200.00 785 157000.00

218.00 Supplying and laying true to line and level Tactile Finish Scratch resistant, Neutral to UV rays, Non-fade, High Slip Resistant Full Body Vitrified Tiles conforming to IS:15622-2006 &

IS :4457- 2007 and tested in accordance with IS:13630 [Non- modular sizes for tiles with Skid resistance: 0.6, Mohr's hardness > 7.0, Staining resistance: Class-1, Water

Absorption E < 0.5%], MOR > 38N/sq.mm & Breaking strength > 4000 N for Outdoor area of building e. g. Driveway, Pathway, Pavements, Parking lots, Sloping ramps, Entrance

lobbies, Patios, Portico, swimming pool enclosure, Bus Passenger Shed & directing visually impaired persons, set over necessary underlay and 2 mm thick cement slurry at back

side of tiles using cement @ 2.91 Kg./Sqm, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles and removal of wax coating of top

surface of tiles with warm water and cleaning the tiles using soft and dry cloth complete including the cost of materials, labour and all other incidental charges complete including

backside slurry but excluding the cost of underlay and true to the manufacturer's specification and direction of Engineer-in-Charge.

218.01 In Ground Floor: Sizes-300 mm x 300 mm x15 mm Sqm 350.00 1768 618800.00

219.00 Supplying fitting & fixing frames for Fire resistant door shutters made of 1st class Malaysian Hardwood (densified to 810 kg/cum) and pressure treated with fire retardant chemicals

in vacuum impregnation vessel under 160 psi pressure as per IS:401 and kiln seasoned to moisture below 15% as per IS:1141 of section 120 mm X 70 mm spray quoted with 2

coats of intumescent paint of minimum 200 micron, with single row of Brush- Type intumescent strip of size 10 mmx 4 mm affixed in the slit of the Frame for fire and smoke sealing,

etc. complete as per direction of Engineer -inCharge including a protective coat of painting at the contact surfaces of the frame excluding cost of concrete,Iron butt hinges and M.S

clamp at Ground Floor. [Note : Specific permission of the Superintending Engineer is required for execution of this item]

Mtr 25.00 1110 27750.00

220.00 Supplying fitting & fixing frames for Fire resistant acoustic door shutters 1st class Malaysian Hardwood Frame (densified to 810 kg/cum) and pressure treated with fire retardant

chemicals in vacuum impregnation vessel under 160 psi pressure as per IS:401and kiln seasoned to moisture below 15% as per IS:1141 of section 120 mm X 70 mm spray quoted

with 2 coats of intumescent paint of minimum 200 micron, with standard double acoustic seal (equivalent to Hafele) placed along two faces of rebate for sound insulation and single

row of Brush- Type intumescent strip of size 10 mmx 4 mm affixed in the slit of the Frame for fire and smoke sealing, etc. complete as per direction of Engineer - inCharge including

a protective coat of painting at the contact surfaces of the frame excluding cost of concrete,Iron butt hinges and M.S clamp at Ground Floor. [Note : Specific permission of the

Superintending Engineer is required for execution of this item. ]Mtr 25.00 1515 37875.00


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

221.00 Supplying & fitting of 55mm thick asbestos free - fire, heat and smoke resistant composite Fire check Door Shutter complying with fire performance- FD120 as per IS:3614 (part -II)-

comprising of 2x8 mm Calcium Silicate boards over Chemically treated (with Fire retardant chemicals in pressure impregnation vessels under 160 psi pressure as per IS:401 and

kiln seasoned to moisture below 15% as per IS:1141) internal timber (Malaysian Hard Wood, densified to 810 kg/cum ) frame work of 100 mm x32 mm with 32mm thick infill of

ceramic fiber (density 128Kg/cum), vermaculite mix faced with 3 mm Fire retardant High Density fire board, internally lipped with hardwood beading, and pasted in Hydraulic Press

under 25 MPa, spray coated with 2 coats of in-tumescent paint of minimum 300 micron, and with single row of Brush- Type intumescent strip of size 10 mm x 4 mm affixed on

peripheral slit on all edges of shutter except bottom for fire and smoke sealing , without any external lipping including fitting ,fixing shutters in position but excluding the cost of

hinges & other fittings as per direction of Engineer -in -charge complete in all respect in Ground Floor. [Note : Specific permission of the Superintending Engineer is required for

execution of this item. ] Sqm 10.00 8570 85700.00

222.00 Supplying & fitting of 65mm thick asbestos free - fire, heat and smoke resistant composite Accoustic Door Shutter complying with fire performance- FD120 as per IS:3614 (part -II)-

comprising of 2x 8 mm Calcium Silicate boards over Chemically treated (with Fire retardant chemicals in pressure impregnation vessels under 160 psi pressure as per IS:401 and

kiln seasoned to moisture below 15% as per IS:1141) internal timber (Malaysian Hard Wood,densified to 810kg/cum ) frame work of 100 mm x32 mm with 32mm thick infill of

ceramic fiber (density 128Kgs/cum), vermaculite mix faced with 6 mm Fire retardant High Density fire board, internally lipped with hardwood beading, and pasted in Hydraulic Press

under 25 MPa, spray coated with 2 coats of in-tumescent paint of minimum 200 micron, and with 1 row of Brush- Type intumescent strip of size 10mmx 4mm affixed on peripheral

slit on all edges of shutter except bottom for fire and smoke sealing and placement of 3 mm thick rubber membrane, at the inside face, sandwiched between calcium silicate board

& high density fire retardant board , without any external lipping including fitting ,fixing shutters in position but excluding the cost of hinges & other fittings as per direction of

Engineer -in -charge complete in all respect in Ground Floor. [Note : Specific permission of the Superintending Engineer is required for execution of this item.]

Sqm 8.00 11336 90688.00

223.00 80 mm thick interlocking designer concrete paver block M-40 grade for medium-traffic zone & utility cuts on arterial roads etc. as per IS: 15658-2006 (over 20-40 mm medium sand

bed on 250mm thk WBM/ WMM base course & 250 mm thk bound gnaular/ granular sub-base course & filling the interstices of blocks with fine sand by brooming & subsequent

watering including cost of sand for sand bed but excluding cost of base, sub-base course & subgrade preparation.) complete as per direction of Engineer-in-Charge. [Note:

Subgrade CBR shouldnot be less than 5]Subgrade CBR shouldnot be less than 5]

223.01 Grey Sqm 25.00 1354 33850.00

223.02 Colour Decorative Sqm 10.00 1503 15030.00

224.00 100 mm thick interlocking designer concrete paver block M-50 grade for hightraffic zone, bus terminus, industrial complex, mandi houses etc. as per IS: 15658-2006 (over 20-40

mm medium sand bed on 250mm thk WBM/ WMM base course & 250 mm thk bound gnaular/ granular sub-base course & filling the interstices of blocks with fine sand by

brooming & subsequent watering including cost of sand for sand bed but excluding cost of base, sub-base course & subgrade preparation.) complete as per direction of Engineer-

in-Charge. [Note: Subgrade CBR shouldnot be less than 5]

224.01 Grey Sqm 45.00 1684 75780.00

224.02 Colour Decorative Sqm 105.00 1833 192465.00

225.00 Providing and fixing Heat Resistant Terrace Tiles (300mm X 300mm X 20mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on

waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joint with mix of white cement &

marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the

same manner. Sqm 15556.68 1080 16801214.00

226.00 Supplying, fitting & fixing Surface mounted Crash Bar/ panic Bar of touch pad style, made of heavy duty cast iron/ steel body & latches with SS, BHMA certified & conforming to

ANSI A 156.3 for grade-1 (3 hours fire rated) and suitable for surface ounting to wooden/hollow metal/ Al framed door withopening upto 900mm, with maximum operating force 6

kg for unlocking easily & outwardly during emergency, complete in all respect as per direction & satisfaction of Engineer-in-Charge. (Note: To be installed at "FIRE EXIT" only under

location specific instruction of Eingineer-in -Charge.)

226.01 for door opening 900 Each 70.00 7104 497280.00

226.02 for door opening 1200 Each 128.00 8081 1034368.00

227.00 Supplying, fitting & fixing Surface mounted overhead Door Closer for 2 hour fire rated doors, of size EN-4 for leaf width upto 950/ 1100mm weighing maximum 60/ 80 kgs, CE

certified, marked & conforming to EN 1154-2003 of approved quality of reputed brand, complete as per direction & satisfaction of Engineer-in-Charge.

for leaf width upto 950mm Each 3.00 3511 10533.00

for leaf width upto 1100mm Each 6.00 3880 23280.00


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

228.00 Supplying, fitting & fixing Stainless Steel 'D' or 'H' type of size 300 mm x 19 mm tubular Handle with Grade 304, CE certified, marked & conforming to EN - 1154, of approved

quality of reputed brand as per direction of Eingineer-in- Charge fitted and fixed complete including all incidental charges Each 240.00 1571 377040.00

229.00 Supplying, fitting and fixing clear visioned, Insulated Double Glazed two track sliding Aluminium window (U-value < 3.2W/m 2 K) made up with 6 mm thick toughened glass (wt >

15kg/m 2 ) with 12 mm air gap in between, containing perforated Al/ structural foam spacer filled with moisture absorbant dessicant at all sides duly sealed with primary sealant

(polyisobutylene) and affixed inside multi cellular/ multi chember profiles of required section made of Alluminium alloy extrusions conforming to IS:733-1983 and IS:1285 - 2002

annodised/powder coated with (required film thickness and specified colour /natural) matt finished conforming to IS: 1868-2006/ IS: 13871-2002 measured as per IS:6012-1992,

and sealed appropriately with secondary (polysulphide/silicon) sealant all junctions complete in all respect as per direction and satisfaction of Engineer-in-Charge including all

incidental charges. (Payment shall be made on finished size of Aluminium window including frame.Sqm 434.16 6439 2795556.00

230.00 Cement concrete flooring with high performance non-metallic floor hardener containing specially graded non-metallic hard wearing natural aggregates imparting floor hardness in

the range of mohr scale 8-9 & capable of achieving 28 days compressive strength of 25 MPa with air content less than 3% applied as a dry shake @ 5Kg/sgm sprinkled to provide

durable, non-slip monolithic floor for application of the topping over freshly laid concrete with under layer of 40 mm. thick cement concrete (1:2:4) (1 cement : 2 coarse sand : 4

graded stone aggregate 20 mm nominal size) as per specification of the manufacturer & as per direction of Engineer-in-Charge. [Note: Floor hardener is applied as dry shake using

a power trowel when the floor concrete has stiffened sufficiently and bleed of water should not be visible on the top of the floor while the application started]

Sqm 2465.06 609 1501222.00

231.00 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast

40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, leveling & dressing & finishing the top smooth.

Sqm 1817.68 450.35 818592.00

232.00 Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by232.00 Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by

Engineer-in-Charge.

232.01 Granite work metre 456.94 245.7 112270.00

233.00 Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc.

complete. metre 456.94 266.25 121660.00

234.00 Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/stone work, including

necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. Each 255.00 427.95 109127.00

235.00 Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked, with one side decorative and other side

balancing lamination Grade I, Type II exterior grade IS : 12823 marked, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings

to be paid separately).

235.01 25 mm thick Sqm 369.45 1304.55 481966.00

236.00 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. Each 757.00 85.85 64988.00

237.00 Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over

P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing

the outlet complete.Each 324.00 187.6 60782.00

238.00 Providing and fixing Gl Clip in Metal Ceiling System of 600x600 mm module which includes providing and fixing 'C' wall angle of size 20x30x20 mm made of 0.5 mm thick pre

painted steel along the perimeter of the room with help of nylon sleeves and wooden screws at 300 mm center to centre, suspending the main C carrier of size 10x38x10 mm made

of G.I steel 0.7 mm thick from the soffit with help of soffit cleat 37x27x25x1.6 mm, rawl plugs of size 38x12 mm and C carrier suspension clip and main carrier bracket at 1000 mm

c/c. Inverted triangle shaped Spring Tee having height of 24 mm and width of 34 mm made of Gl steel 0.45 mm thick is then fixed to the main C carrier and in direction

perpendicular to it at 600 mm centers with help of suspension brackets. Wherever the main C carrier and spring T have to join, C carrier and spring T connectors have to be used.

All sections to be galvanized @ 120 gms/sqm (both side inclusive), fixing with clip in tiles into spring T with :238.01 GI Metal Ceiling Clip in plain Beveled edge global white color tiles of size 600x600 and 0.5 mm thick with 25 mm height, made of G I sheet having galvanizing of 100 gms/ sqm

(both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending.Sqm 2360.00 1329.65 3137974.00


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

239.00 Providing and fixing aluminium work for doors, windows, ventilatorsand partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of

approved makeconforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps atjunctions, i.e. at top, bottom and

sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically wherever required including cleat

angle, Aluminium snap beading for glazing / paneling,C.P. brass / stainless steel screws, all complete as per architecturaldrawings and the directions of Engineer-in-charge.

(Glazing, panelingand dash fasteners to be paid for separately) :

For fixed portion

239.01 Anodised aluminium (anodised transparentor dyed to required shade according to IS:1868, Minimum anodic coating of grade AC 15 kg 30214.19 355.2 10732080.00

240.00 For shutters of doors, windows & ventilators includingproviding and fixing hinges/ pivots and making provisionfor fixing of fittings wherever required including the costof EPDM

rubber / neoprene gasket required (Fittinshall be paid for separately)

240.01 Anodised aluminium (anodised transparentor dyed to required shade according to IS:1868, Minimum anodic coating of grade AC 15) kg 61896.39 415.05 25690097.00

241.00 Providing and fixing Glass Reinforced Concrete (G.R.C) Screens in approved size, pattern, design, thickness and color. The Screens should be made from ‘53 grade’ White

Portland Cement Quartz, Fine Silica Sand, Alkali Resistant Glass Fiber manufactured by ‘Saint Gobain’ or equivalent, Super Plasticizers manufactured by ‘BASF’ or equivalent,

Polymers manufactured by ‘BASF’ or equivalent and U.V resistant Synthetic inorganic pigments should be used for pigmentation manufactured by ‘BAYFERROX (Germany)’ or

equivalent. The material casting should take place in Synthetic Rubber / FRP Mould manufactured by ‘Reckli’ or equivalent. The fixing of Screens should be ‘Dry fixing’ i.e. to be

done with Stainless Steel (SS – 304) ‘L’ shaped Clamps, dash fasteners and pins. The work to be carried out at all heights and depths. The GRC screen of M/s Unistone make or

equivalent. Sqm 781.00 6500 5076500.00

242.00 Extra for maintain uniform cavity in two brick wall as per drawing or as approved by Engineer-in-Charge. Sqm 19099.08 55 1050449.00

243.00 Providing factory made compaced laminated toilet cubicle with 2030mm Height x 900mm width x 1550mm depth including 600mm door width and fixed at site made out with Nylon

Polymide Grading Accessories with aluminium powder coated top rail and vertical poles. The modular shall possess 100% Properties towards; water, chemical impact 12mm thickPolymide Grading Accessories with aluminium powder coated top rail and vertical poles. The modular shall possess 100% Properties towards; water, chemical impact 12mm thick

compact laminate made as per IS:2046 is and as per fire retardant BS-476/97. Partation and shutter to be fixed above 150mm floor finish level over Aluminiu frame in Gray colour

or as directed by Engineer-in-Charge. Sqm 933.50 5821.55 5434417.00

244.00 Providing and filling light weight concrete broken block filling in sunken / step area etc including the filling gaps with smaller light weight concrete broken block etc all complete as

directed by engineer-in-charge. Cum 1476.00 3809.4 5622674.00

245.00 Providing and laying Zentrifix Elastic-Flexible membrane coating consisting of Zentrifix Elastic Powder (1 Kg./bag) and Emcefle-15 Liquid (0.5 Kgs./bag) consumption for wet area

shall be minimum 3 Kgs./sq.m or 1.7 Kgs./sq.m/mm thickness complete as manufactured by M.C. Bauchmie (I) or approved equivalent as per Architect's direction. Note :Rate to

be quoted for 1 mm thickness of membrane. Sqm 8035.40 400 3214160.00

245.01 Providing and laying Polymer modified concrete screed 50mm thick using 8mm down aggregate in 1:1:3 (1 cement : 1 aggregate : 3 coarse sand admixed with special

DICHATMENT DM-0.5% by weight of cement, NAFUFIL SBR-5% by weight of cement) complete manufactured by M.C. Bauchemie or approved equivalent as per Architect's

direction.Sqm 7416.81 300 2225043.00

245.02 Providing and laying EMCEKRETE or approved equivalent non-shrink grout of size 30x30mm complete. R.M. 5724.85 80 457988.00

Note:

All additional openings made in and around RCC slab for sanitary pipes shall have to be sealed, grouted and made water tight before commencing on the above works and above

treatment shall be carried out through a specialised approved agency.

The treatment is to be carried out by a specialised agency with the approval of the consultant and shall be guaranteed fully effective for a period of ten years. Notwithstanding this,

the responsibility of the effectiveness of the treatment shall be fully, entirely and unqualifiedly be that of the main contractor for the work.


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

246.00 1) Design, supply and installation of Terracotta Baguette extrusions size 60 mm x 60mm x 10 mm with side fixing details as per approved manufacture specification. The Baguette

holder of size 24mm x 42mm x 30mm of AI 6063 T5 alloy shall be inserted into the Baguette fixing hole and in turn slided into the Baguette bracket made out of extruded Al 6063

T5 anodised to AA-10. The Baguette holder will be tightened to the Bracket using 10mm Align Key Screws. The gap between the Baguette and the Baguette Bracket will be closed

with a Joint Cover made out of extruded Al 6063 T5. Terracotta Extrusions shall be up to 1800mm in length and designed to withstand wind loads up to 2 Kpa. Baguette

Extrusions shall be installed at 100 mm centre to centre. Rate to included terracotta extrusions and end fixing accessories. The Water Absorption as per EN ISO 10545 PART 3,

Frost resistance as per EN ISO 10545 PART 12 , Chemical resistance as per EN ISO 10545 PART 13, Dimensions & tolerances to adhere to EN ISO 10545 PART 2.

Substructure shall be installed as per requirement and would be in the scope of the Contractor.Sqm 395.00 6500 2567500.00

Note:-

The Aluminium Sub Structure for fixing the Baguettes shall be as per the below specifications.

1) Wall Bracket (C shape) 6mm plate 2 sided (115x75x6mm)

2) Aluminium Mullion of size 100x50x3mm thick

3) Anchor Fastners of Hilti Make

247.00 Providing & fixing 2nd class teak wood batten seating box 75x50mm with all including fixing steel frame work for seating with top row bolt and polished with melamine polish etc.all

complete as directed by engineer-in-charge. Meter 2429.49 600 1457694.00

248.00 Supply and fixing of KALZIP 65/400 “SELF SUPPORTED” SECRET FIX STANDING ROOFING SYSTEM IN 0.9mm THICK AA 3004 ALUMINIUM ALLOY. The general roof-

construction shall comprise from bottom to top:

Steel Liner – Kalbau (Kalzip) 35/200 Colour coated Galvalume steel liner sheet, 0.5 mm tct 1000 mm total cover width x 35 mm deep ribs spanning up to 1200mm centres

(multiple spans).

Vapour Control Layer – A single layer of double-sided aluminium foil/ Polyethylene Film .

Clips – The aluminium clips must be used to fix aluminium sheets to the substructure. Appropriate non penetrative clips to be used, with help of SS 304 screwsClips – The aluminium clips must be used to fix aluminium sheets to the substructure. Appropriate non penetrative clips to be used, with help of SS 304 screws

Insulation - A layer of Rockwool insulation of 100mm thickness minimum 60 kg/m3 density with thermal conductivity (K) =0.040 W/mk at 25 degree Celsius. Fire classification with

test procedures to BS 476: Parts 6 & 7.

Top layer – Kalzip 65/400 profiled straight sheeting manufactured from Aluminium self-supported standing seam roof system manufactured from Aluminium alloy AA 3004

(AlMn1Mg1 ) as specified in BS EN 1396 :2015), minimum material

thickness of 0.9 mm and PVDF finish on the exposed surface. (std.colour RAL 9006/9010/9007) .

The material properties shall be as follows:

Ultimate tensile strength: minimum 200 N/mm2, 0.2% Proof Stress: min 185 N/mm2,

Modulus of elasticity: 70,000 N/mm2

The roll formed panels and adjoining panels shall be machine zipped for interlocking. The aluminium roof elements will be supported by and joined longitudinally with an electrically

operated closure machine over concealed aluminium clips integrated into the longitudinal element flange thereby allowing for the possibility of transmitting reaction forces resulting

from positive and/or negative loads and also accommodating unobstructed thermal movements resulting from the specified ambient temperature range.

Note: The structure/purlins should be paid in relevant item.Sqm 3580.00 5800 20764000.00

248.01 Flashing: will be formed from 0.9mm thick coil, same as that used for Kalzip panels. ( max girth 578 mm) as per site requirement meter 410.00 1550 635500.00

248.02 ALUMINUM WELDING as per site requirement meter 1230.00 1100 1353000.00

249.00 Extra for making honed finish in granite as per drawing or as directed by engineer-in-charge. Sqm 1111.68 300 333504.00

250.00 Extra for making Flamed granite as per drawing or as directed by engineer-in-charge. Sqm 157.02 250 39255.00


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

251.00 LUXALON U-Baffle (50mm x 100mm) False Ceiling System in 150mm module

Providing and fixing Luxalon* U Baffle Aluminium panel ceiling of approved woodgrain colour consisting of panel size 50 mm width X 100 mm deep using 0.6 mm thick, panel

length upto 4 mtr, Cail Coated on a Continuous Paint Line, Double baked and roll formed fram enamelled corrosion resistance Aluminiu m alloy AA 3005 (Al. Mg) for higher

strength and good roll forming characteristics. Panels shall be clipped to a baked enamelled Aluminium carrier of 30 mm wide x 47 mm high x 0.5 mm thick, Black Colour

coated, one leg of the carriers with cut outs to hold the panels in a moduIe of 150 mm. Panel carrier shall be suspended by means of threaded rod at a distance of 1.8 mtr c/c.

(Actual distance of threaded rod/carrier to be calculated based an the actual drawing)

PAINT FINISH: Aluminium panels shall be chromatised for maximum bond between metal and paint enamelled

twice under high ternperature, Exposed side with a fuII primer and finish coat an a Continuous Paint Line.

MODE OF MEASUREMENTS: Actual area to be measured Sqm 813.04 3890 3162726.00

252.00 Supplying, fitting & fixing chiseled granite slabs 15mm to 18 mm. thick over columns, wall, facia,rise etc. with 15 mm thick [avg] cement mortar (1:2) including making suitable

arrangements to hold the stones properly by brass / copper hooks including pointing in cement mortar (1:2) (1 white cement : 2 marble dust) with admixture of pigment matching

the stone shades all complete as per direction of the Engineer-in-charge including cost of all materials, labours, scaffolding, staging, curing and roughening of concrete surface

complete. [Using cement slurry at back side of granite @ 4.4 kg/sq.m & white cement slurry for joint filling @ 1.8 kg/sq.m]

252.01 Area of each Granite slab 0.6 to 1.0 Square meter. Sqm 718.75 3154 2266938.00

253.00 Supply and fixing acrylic flexi solid surface of required thickness of 6 mm, 760mm wide and 2440mm length, having Tensile strength - 37.83 MPA, Tensile Modulus - 10446MPA,

Density - 1760-1779 Kg/m2, Barcol hardness - 59, Flexural Strength - 56.2 - 66.9 MPA including all the necessary material or fixing the sheet i.e. - Glue, Silicone. (Basic cost of

material Rs. 4700/Sqm FOR at site includign all tax and transportation) Sqm 195.87 7063 1383430.00

254.00 Supply and fixing acrylic flexi solid surface of required thickness of 12 mm, 760mm wide and 2440mm length, having Tensile strength - 37.83 MPA, Tensile Modulus - 10446MPA,

Density - 1760-1779 Kg/m2, Barcol hardness - 59, Flexural Strength - 56.2 - 66.9 MPA including all the necessary material or fixing the sheet i.e. - Glue, Silicone. (Basic cost ofDensity - 1760-1779 Kg/m2, Barcol hardness - 59, Flexural Strength - 56.2 - 66.9 MPA including all the necessary material or fixing the sheet i.e. - Glue, Silicone. (Basic cost of

material Rs. 5600/Sqm FOR at site includign all tax and transportation) Sqm 190.87 8301 1584412.00

255.00 Providing and making control /isolation joints in ground floor slab as shown in the drawing which consists of:

255.01 4x40mm groove cutting in straight line by groove cutter.

255.02 Fill groove with dry sand upto 20mm depth.

255.03 Fill the groove with 20x4mm with flexible epoxy carefully with a filling gun and with masking tapes to avoid spillage remove masking tapes and extra material over joint by grinding

etc. complete. mtr 1844.15 150 276623.00

256.00 Providing & fixing 6mm thick flexi ply fixed over wood frame work in required shape all as per drawing etc. all complete as directed engineer in charge. Sqm 65.97 950 62672.00

257.00 Providing & fixing 25 mm thick commercial ply in fins fixed over over dumy clumn over 6mm thick flexi ply in required size all as per drawing etc. all complete as directed engineer

in charge Sqm 70.00 1350 94500.00

258.00 Supply and fixing 8mm thick pvc vinly flooring(Rubberised Floor) with 2mm wear layer in Genstone/Crystal sand with properties of shock absorption DIN 18032>35%, Ball bounce

DIN 18032 >98% and fire GBB624-2006-BF_S ration 10. Insulation to be laid on cement concrete flooring which should be perfectly loveled, smooth & mousture free. The joint

between the laid PVC vinly Sheet shall be welded with similar material that pvc vinly of same colour.

NOTE:- Size of sheet 1800x15000mm) Sqm 1295.98 4573 5926517.00

259.00 Providing and laying vulcanized elastomeric Grey-Black Dusted EPDM membrane with factory applied Secure Tape technology based UG Tank waterproofing including preparation

of surface as required for treatment of basement etc. consisting following operations:

Vertical

259.01 Providing and laying Grey Black Dusted non-reinforced 60 mil membrane overlapping the left horizontal membrane on the PCC to the vertical Peripheral walls as shown in the

drawing after removing any sharp material like reinforcement steel etc. from the surface by sealing the membrane with 150mm wide secure tape with sheet to the extended portion

of the horizontal memberane as per the manufacturers specifications in all complete. The membrane shall be temporary mechanically fixed every 3-4 meters to hold the membrane

if required and to be fully adhered with Sure Seal Bonding Adhesive applying on both side on retaining wall and on the membrane as well to make it fully bonded with the surface.

At the top end on the vertical side the membrane is fixed with aluminium flashing, HP fastener and sealed with Sealant Water cutoff mastic, further the membrane is protected with

3-5mm thick Sure board or HDPE protection drainage board protection boards shall be placed spot bonded over the membrane with adhesive as sacrificial layer.

Sqm 1860.80 1100 2046880.00


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

Note: In this case of waterproofing system, the membrane can take care of seismic forces and is stable against settlement of sub-base, this system is a loose laid type and can be laid

within 24hrs. Of laying of PCC and an area of over 2000sqm can be completed in one day's time as because the membrane is available is larger width and length.

In case of any Sheet Pile, that shall be treated separately as extra item.

Protection screed shall be provided free of cost at site by client.

260.00 Iron socket bolt of approved quality fitted and fixed complete. Each 64.00 63 4032.00

261.00 Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : Each 10.00 22.65 227.00

262.00 Extra for making "MOTIF" in Granite/Marble/Vitrified Tiles/Kota Stone as per drawings or as directed by engineerin-in-charge Note. Granite/Marble /Vitrified Tiles/Kota Stone to be

paid in respective item.Sqm 63.83 3500 223405.00

Quoted rate shall include:

263.00 The above treatment is to be carried out by a specialised agency with the approval of the Consultant and shall be guaranteed fully effective for a period of ten years.

Notwithstanding this, the responsibility of the effectiveness of the treatment shall be fully, entirely and unqualifiedly be that of the main contractor for the work.Roof Waterproofing with Insulation

Providing and laying Grey-Black Dusted EPDM membrane with FAT technology Membrane treatment for Concrete Roof Level with Insulation, including preparation of the surface

as required for treatment consisting following operations:

Horizontal

263.01 The surface of the roof top structure should be cleaned of all dirt, loose material and kept dry.

263.02 Over the laid M- 25 Cement Concrete, providing and laying providing and laying specially formulated single-ply Grey-Black Dusted 60 mil (1.5 mm) EPDM non-reinforced with263.02 Over the laid M- 25 Cement Concrete, providing and laying providing and laying specially formulated single-ply Grey-Black Dusted 60 mil (1.5 mm) EPDM non-reinforced with

factory applied tape of 150mm . The membrane mush have Grey-Black dusted surface with the roll size 20'x100' Roll with Factory applied tape only. Membrane shall be laid loose.

Over lap joint shall be made using SecurTape technology . Membrane shall have minimum of 75mm side and end laps which shall be sealed with highly formulated double sided

secure tape.

Vertical

263.03 Providing and laying Grey-Black Dusted non-reinforced 60 mil 1.52 EPDM membrane by overlapping on the horizontal membrane on the vertical parapet walls as per

manufacturers specifications in all complete. The membrane shall be fully bonded with Sure Seal Bonding adhesive with vertical surface. At the top end on the vertical side the

membrane is fixed with aluminium flashing and sealed with Sealant and Water cutoff mastic.

263.04 Over the EPDM Membrane providing and laying Sure Roof XPS size of 600mm x 1250 mm x 100 mm thick square edge or ship lap boards in brick pattern : staggered joints with

the help of adhesive to spot stuck at centre & corners. The insulation boards would have a density of 40 kg per cu mtr with a K value of 0.028-0.030 W/m K : compressive

strength of > 300-350 kpa , water absorption of < 1 % by volume, B 2 grade fire compliance etc.

263.05 The membrane shall be covered with the geotextile of 200 gsm membrane for the protection of EPDM membrane to avoid to get membrane punctured while working further and

protected by laying 1:2:4 protection Cement Concrete screed laid in slope of 1:120 by the Civil Contractor.(Plan area only shall be measured for payment of all above

operations.)Sqm 8063.46 1561.62 12592060.00

Note:

All additional openings made in and around RCC slab for sanitary pipes shall have to be sealed, grouted and made water tight before commencing on the above works and above

treatment shall be carried out through a specialised approved agency.

The treatment is to be carried out by a specialised agency with the approval of the consultant and shall be guaranteed fully effective for a period of ten years. Notwithstanding this,

the responsibility of the effectiveness of the treatment shall be fully, entirely and unqualifiedly be that of the main contractor for the work.

264.00 Providing and laying Grey-Black Dusted non-reinforced 1.52mm EPDM Membrane treatment on Concrete Roof Level, including preparation of the surface as required for treatment

consisting following operations:

Horizontal

264.01 The surface of the roof top structure should be cleaned of all dirt, loose material and kept dry.


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

264.02 Over the laid M- 25 Cement Concrete, providing and laying providing and laying specially formulated single-ply Grey-Black Dusted 60 mil (1.5 mm) EPDM (Ethylene, Propylene,

Diene Terpolymer) non-reinforced with factory applied tape of 150mm on one side of the roll. The membrane mush have Grey-Black dusted surface with the roll size 20'x100' Roll

with Factory applied tape only. Membrane shall be laid loose. Over lap joint shall be made using SecurTape technology . Membrane shall have minimum of 75mm side and end

laps which shall be sealed with highly formulated double sided SECUR TAPE. Membrane shall be able to resist 40mtr. head pressure, with tensile strength of > 10.5 mpa,

elongation > 465% and water vapour diffusion of < 24'000 microns, Tear resistance to ASTM D624, Die C dimensional change < -0.7%. 100% UV resistance, Ozone resistance

according to ASTM D1149.

Vertical

264.03 Providing and laying Grey-Black Dusted non-reinforced 60 mil 1.52 EPDM membrane by overlapping on the horizontal membrane on the vertical parapet walls after removing any

sharp material etc. from the surface by sealing the membrane with SECUR TAPE with sheet to the extended portion of the horizontal memberane as per the manufacturers

specifications in all complete. The membrane shall be fully bonded with Sure Seal Bonding adhesive with vertical surface. At the top end on the vertical side the membrane is fixed

with aluminium flashing and sealed with Sealant and Water cutoff mastic.

264.04 The membrane shall be covered with the geotextile of 200 gsm membrane for the protection of EPDM membrane to avoid to get membrane punctured while working further and

protected by laying 1:2:4 protection Cement Concrete screed laid in slope of 1:120 by the Civil Contractor.Sqm 12713.34 1180 15001741.00

265.00 Providing and Laying water proofing treatment for car parking, Podium and Garden Over basement roof slab, all as following specification carrying 10 years guarantee (Tender

should submit the name of specialist)

. Note : Used PPC Cement to be used confirming to IS: 1489 (Part-I)

265.01 Two Coats of elastic, colored Acrylic cementations coating system Sika top seal 107 and Brush Bond RFx water proofing.

265.02 15mm cement plaster 1:4 (1 Cement : 4 Coarse sand) admixed with 5% by weight of comp of Sika plastocrete and fosroc coplos WL.

265.03 3mm APP (Atactic Poly Propylene Polymer ) water proofing, membrerance reinforced with glass fiber matt.

265.04 All corner junction with a coat of admixed with Sika Plastocrete and Pesroc coplast WL. 265.04 All corner junction with a coat of admixed with Sika Plastocrete and Pesroc coplast WL.

265.05 0.80mm thick PVC sheet with Hot Bitument water Proofing Pradhan.

265.06 Water Proof Polymer Modified screet 50mm (AV) 1:2:4 (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 10mm done nominal size) Admix with Sika Polasterrete and

Fosroc Coplast WL. Note : The treatment is to be carried out by a specialised Agency with the approval of Engineer-in-Charge. The Specialised Agency should furnish the guarantee in the named of

owner for a period of 10 years. Not with standing this. The responsibility of the Effectiveness of the treatment shall be entirely and unqualified be that of the main contractor for the

work. The tender to state the name of specialised firm: Sqm 1691.70 1609.17 2722233.00

266.00 Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length,

upto 3 m height of wall with existing angle iron 'Y' shaped placed 2.4 m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips

to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring

core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately)

Meter 922.00 408 376176.00

267.00 Providing 150 mm thick stone soling with 90-45mm stone aggregate 2.76 cum/per 10 sqmt with stone screening 13.2mm 0.6 cum per 10 sqmt and Morrum 0.15 cum/per 10 sqmt

including consolation etc all complete as directed by Engineer-in-charge.Cum 150.08 1200.00 180096.00

268.00 Supplying, fitting, fixing in position netting with PVC Coated Crinkle mesh of approved colour with wooden or steel or concrete frame work including cost of galvanised bolts, nuts,

screws, nails, spacers, shape welding etc complete but excluding the cost of supporting frame works, battens etc.

268.01 (c) 50 mm. x 50 mm. x 8 g. Sqm 140.38 455 63873.00

269.00 Add using extra cement in the item of Design Mix over .

270.00 Providing, laying and fixing in position metal decking at all height and depth with YSAGHT SMARTDEK TM 51 is 960 mm effective cover width with nominal 51 mm deep ribs with

nominal pitch of 316 mm centre to centre. The check profile is having embossment and stiffness. Embossments on the top of flange provide the mechanical connection between

the steel and concrete. Base metal thickness (BMT) of 1.20mm with minimum yield strength of 500 MPa. Having 275 GSM (in/sqmt) coating on both sides of sheets confirms to

Australian standard. As 1397 & BSEN 10147 : 2000. Also consider are 5 Nos. of sheer studs etc. all complete of approved make such as TATA Blue scope steel limited or

equivalent as directed by Engineer-in-Charge. Sqm 4032.00 1673.95 6749366.00


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

Landscape work

271.00 Earthwork in cutting to form road section in correct profile including removal of spoils not exceeding initial lead of 50m and initial lift of 1.5m.

(Mode of measurement: pre works and post works)271.01 (ii) In mixed soil (i,e. clay mixed with kankar, pebbles, moorum etc.) cum

272.00 Extra for manual compaction of earth by rammers / hand roller in 250 mm layers including watering etc. if required. (Borrow pit measurement). cum 25665.02 20.00 513300.00

273.00 Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be

made on the basis of measurement of finished quantity of work)273.01 (iii) With carried earth arranged by the contractor within a radius exceeding 3 km. but not exceeding 5 km. including the cost of carried earth. %cum 125.79 39901 5019147.00

274.00 B. Compacting original ground supporting embankment Loosening, Leveling and Compacting original ground supporting embankment to facilitate placement of first layer of

embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density as given in Tables 300.1 and 300.2 for

embankment construction as per Clause 305.3.4 of Specifications for Road & Bridge Works of MoRT&H (5th Revision).cum 1535.76 24.10 37012.00

275.00 Supplying, filling. Spreading & leveling Enginered Soil of mix ( Course sand 30% + Sand 20% + Clay 40% + silt 10% ) in the pit, in required thickness, for all leads & lifts all

complete as per direction of Engineer - in charge. cum 121.59 538.25 65446.00

276.00 Brick edging 7.5 cm wide 12.5 cm deep to plinth protection with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 including grouting with cement mortar 1:4

(1 cement : 4 fine sand).metre 52.85 3535.00 186825.00


in ground floor.in ground floor.

277.01 (i) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr. Qntl 2.94 7238.00 21280.00

277.02 (b) Extra for work in grill gate.

(I) For hanging and locking arrangements including supply of materials and labour complete.

(15% extra over the corresponding item of grill )Qntl 15.74 1085.70 17089.00

277.03 (ii) For supplying fitting and fixing bottom rollers including all labur complete.

(5% extra over the corresponding item of grill ) Qntl 15.74 361.90 5696.00

278.00 Supplying fitting and fixing 600 mm (+/- 30 mm) diametre R.B.T (Reinforced Barbed Tape) Concertina fencing on wall top using concertina coils stretched to approx.6 meters length

at site clipped with two nos. of horizontal R.B.T strands which will be tensioned and fixed with the vertical M.S angle iron posts by means of security fasteners (such as 'C' clips,

R.B.T clips etc.) metre 1285.38 408.00 524435.00

279.00 Holding down bolt with nut including 100 x 100 x 6 mm plate washer at bottom fitted complete and packing the hole with cement concrete or cement grout as directed.

279.01 (i) 16 mm dia bolt

279.02 (a) 300 mm long Each 200.00 86.00 17200.00

280.00 Construction of granular sub-base by providing graded material, mixing in Wet Mix Plant at OMC, carriage of mixed material to work site, spreading in uniform layers with Motor

grader on prepared surface in proper grade and camber, compacting with vibratory power roller to achieve the desired density, including lighting, guarding, barricading, including

cost of all materials, machinery, tools and plants and cost of quality control complete as per Clause 401 of Specifications for Road & Bridge Works of MoRT&H (5th Revision).

280.01 (iii) Grading – III cum 2993.22 1682.94 5037410.00

281.00 Supplying, spreading and consolidating Moorum to a depth of 75 mm at desired density and C.B.R. as per specification with power roller to proper gradient and camber including

watering as necessary, and lighting, guarding, barricading and making adequate earthen bundh where necessary to protect the edges and curing with water for 2 to 3 days,

mending cracks by rolling where necessary including all incidental charges of roller, cost of fuel & lubricants etc. complete as per specification. cum 3337.50 172.00 574050.00


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

282.00 Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar

1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage

opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be

approved by Engineer-in-charge).cum 60.54 6303.75 381629.00

283.00 Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of

approved s;ze, design & shape, laid in overover 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry in footpath,

parks, lawns, drive ways or light traffic parking etc. complete as per manufacturer's specifications & direction of Engineering- Charge. 283.01 (i) Grey sqm 4245.37 1125.00 4776041.00

283.02 (ii) Coloured Decorative sqm 873.83 1253.00 1094909.00

284.00 Extra for covering top of road for Fire Tender with Geocell 100-710 ie 100 mm height, , 100% polyester of thickness 1 to 1.25 mm bonded to the membrane with intermittent touch

by heating the membrane by Butane Torch as per manufactures recommendation. sqm 579.00 306.19 177284.00

285.00 Supplying, testing and installation of 1.0-2.0 m wide Woven Jute Geotextile (JGT) 724 gm/sqm possessing tensile strength of 25 kN/m (+10%, -5% tolerance) with a porometry

around 150 to 400 micron and thickness 2 mm. Jute fabric should be laid with overlaps of 150 mm crosswise and 300 mm longitudinally duly secured to subgrade by U-shaped

M.S. staples (11 gauge)/ round head country nail of 150 mm length at an interval of 750 mm or as per direction of the Engineerin-Charge.

285.01 Using Treated Woven Jute Geotextile with approved rot-resistant (eco-friendly) additive. sqm 1094.72 96.70 105859.00

286.00 Laying of a geotextile filter on embankment slopes on which pitching is laid to prevent escape of the embankment material through the voids of the stone pitching/cement concrete

blocks as well as to allow free movement of water without creating any uplift head on the pitching. sqm 1094.72 126.00 137935.00sqm 1094.72 126.00 137935.00

287.00 Providing and laying local soil ( having density 2000 kg per cum ) mix with 5% cement by weight of soil & 2.5% RENOLITH WS (Soil Stabilizer Concentrated) (add 4 times of

water ) by weight of cement. (as per manufactture's specification). The the soil mix Using concrete mixer. and laying on pond surface compressive manually, and fixing of holding

down bolt. ( the cost of bolt will pay in saperate item. ) cum 184.59 4892.19 903050.00

288.00 Providing , installation and commissioning of water body ( lilly pool ) fountain etc as per manufacturer specification. That is MECHANICAL EQUIPMENT, UNDER WATER

LIGHTS, FILTERATION SYSTEM etc all complete.job 1.00 398849.00 398849.00

289.00 Supplying and stacking sludge at site including royalty and carriage up to 1 km ( sludge measured in stacks will be reduced by 8% for payment). cum 623.15 457.00 284780.00

290.00 Supplying and stacking at site dump manure from approved source, including carriage up to 1 km (manure measured in stacks will be reduced by 8% for payment) :

Screened through sieve of I.S. designation 4.75 mm cum 124.63 335.13 41767.00

291.00 Spreading of Sludge Farm Yard Manure or/and good Earth

Spreading of sludge farm yard manure or/ and good earth in required thickness (cost of sludge, farm yard manure or/and good earth to be paid for separately) cum 13210.75 19.80 261573.00

292.00 Making Lawns including Ploughing and Dragging with 'Swagha' Breaking of Clod.

Making lawns including ploughing and breaking of clod, removal of rubbish, dressing and supplying doobs grass roots and planting at 15 cm apart, including supplying and

spreading of farm yard manure at rate of 0.18 cum per 100 sqmsqm 17254.00 20.20 348531.00


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

293.00 Maintenance of Lawns or Turfing of Slopes

Maintenance of lawns or Turfing of slopes (rough grassing) for a period of one year including watering etc. sqm 34508.00 60.30 2080832.00

294.00 Planting and Maintaining of Permanent Hedges

(a) Planting permanent hedges including digging of trenches.

295.00 Planting permanent hedges including digging of trenches, 60 cm wide and 45 cm deep, refilling the excavated earth mixed with farmyard manure, supplied at the rate of 4.65 cum

per 100 metres and supplying and planting hedge plants at 30 cm apart.metre 4820.50 205.80 992059.00

295.01 (b) Maintenance of hedge for one year metre 4820.50 122.30 589547.00

296.00 Planting and Maintaining of Flowering Plants and Shrubs.

296.01 (a) Planting flowering plants and shrubs in central verge. km 6.75 22397.00 151180.00

297.00 Planting of Trees and their Maintenance for one Year

Planting of trees by the road side (Avenue trees) in 0.60m dia holes, 1 m deep dug in the ground, mixing the soil with decayed farm yard/sludge manure, planting the saplings,

backfilling the trench, watering, fixing the tree guard and maintaining the plants for one year. each 799.00 688.00 549712.00

298.00 Half Brick Circular Tree Guard, in 2nd Class Brick, internal diameter 1.25 metres, and height 1.2 metres, above ground and 0.20 metre below ground

Half brick circular tree guard, in 2nd class brick, internal diametre 1.25 metres, and height 1.2 metres, above ground and 0.20 metre below ground, bottom two courses laid dry,

and top three courses in cement mortar 1:6 (1 cement 6 sand) and the intermediate courses being in dry honey comb masonry, as per design complete.each 480.00 1620 777600.00

299.00 Preparation of mounds of various size and shape by available excavated / supplied earth in layers not exceeding 20 cm in depth, breaking clods, watering of each layer, dressing

etc., lead upto 50 meter and lift upto 1.5 m complete as per direction of Officer-in-charge. cum 1451.70 170.13 246983.00etc., lead upto 50 meter and lift upto 1.5 m complete as per direction of Officer-in-charge. cum 1451.70 170.13 246983.00

300.00 Supplying ground coverage's with soft cuttings ( including supply of required numbers of developed polled plants), on prepared ground, complete as per direction of Officer in

charge.

Ordinary ground coverage

300.01 Providing and Displaying of Alpinia Variegated (three in one) plant having ht. 30 cm and above , with fresh and healthy variegated foliage in 25 cm size of Earthen Pot / Plastic Pot

& as per direction of the officer-in-charge. each 1500.00 158.98 238470.00

300.02 Providing and Displaying of Asparagus marrie plant, well developed 15 to 20 leaves, full of branches and foliage in 25 cm size of Earthen Pot / Plastic Pot & as per direction of the

officer-in-charge. each 3500.00 72.26 252910.00

300.03 Providing and Displaying of Euphorbia milli hybrid variety plant, having ht. 30 cm to 45 cm with multi branch, full bloom, fresh and healthy leaves in 30 cm size of Earthen Pot /

Plastic Pot & as per direction of the officer-incharge.each 1050.00 144.53 151757.00

301.00 Supplying Shrub on prepaired pit, including cost of plant, for all leads and lifts

301.01 Supply and stacking of plant Ficus blackii (F.vivion) (bushy) of height 150- 165 cm. with 8-10 branches and healthy foliage in earthen pots of size 30 cm as per direction of the

officer-in-charge. each 2012.00 352.5 709230.00

301.02 Supply and stacking of plant Ficus panda of height 90-105 cm. with 10-12 branches and healthy foliage, well formed in cement pots of size 30 cm as per direction of the officer-in-

charge. each 2012.00 317.25 638307.00

301.03 Supply and stacking of plant Hibiscus variegated of height 60-75 cm. with 8-10 branches and healthy variegated foliage in cement pots of size 35 cm as per direction of the officer-

in-charge. each 2013.00 253.8 510899.00


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

302.00 Cost of supplying and planting Tree plants The height should not be less mentioned against the name of Tree. These should be supplied in polybag or earthen pot of min. 300mm

dia. or as per size of trunk. the plant to be planted as per site engineers instruction, the approved species are

Species

302.01 Terminalia catappa each 48.00 1674.40 80371.00

302.02 Plumeria rubra each 30.00 4186.00 125580.00

302.03 plumeris alba each 39.00 4186.00 163254.00

302.04 Madhuca latifolia each 24.00 2898.00 69552.00

302.05 Pterospermum acerifolium each 18.00 5232.50 94185.00

302.06 Schleichera trijuga each 24.00 3542.00 85008.00

302.07 terminalia mantally each 35.00 6279.00 219765.00

302.08 Acacia auriculiformis each 43.00 2254.00 96922.00

302.09 Butea monosperrma each 58.00 3542.00 205436.00

302.10 Bombax ceiba each 7.00 2898.00 20286.00

302.11 Shorea robusta each 30.00 2898.00 86940.00

302.12 Alstonia scholaris each 27.00 2415.00 65205.00

302.13 Delonix regia each 26.00 3461.50 89999.00

302.14 Peltophorum ferruginium each 35.00 2576.00 90160.00

302.15 Albizia lebbeck each 14.00 2898.00 40572.00

302.16 Samanae Saman each 14.00 3542.00 49588.00

302.17 Cassia fistula each 29.00 2576.00 74704.00

302.18 Jacaranda mimosifolia each 12.00 2576.00 30912.00

302.19 Spathodia campunalata each 22.00 3542.00 77924.00

302.20 Anthocephalus cadamba each 8.00 3453.45 27628.00

302.21 Azadirachta indica each 19.00 2254.00 42826.00302.21 Azadirachta indica each 19.00 2254.00 42826.00

302.22 Mimosops elengi each 12.00 3542.00 42504.00

302.23 Syzigium cumini each 24.00 2898.00 69552.00

302.24 Terminalia arjuna each 4.00 3542.00 14168.00

302.25 Emblica officinalis each 9.00 2254.00 20286.00

302.26 Ficus religiosa each 10.00 2898.00 28980.00

302.27 Tabebuia argentia each 18.00 2576.00 46368.00

302.28 Tabebuia impetignosa each 4.00 2576.00 10304.00

302.29 Lagerstromia indica each 15.00 3542.00 53130.00

302.30 Bamboosa Vulgaris each

302.31 PALM

302.32 Borassus flabellifer each 30.00 5876.50 176295.00

302.33 Roystonea regia each 21.00 5755.75 120871.00

302.34 BAMBOO

302.35 Bambusa vulgaris each 90.00 1449.00 130410.00

303.00 Supplying and fixing Wild Grass at site of work and carriage from neursery ( Grass should be lush green free from weeds with good and healthy stolens ) initialy kept in a

temporary nursery with proper care and spraying / sprinkling water to kept in teach till its grassing.

303.01 Phragmites each 337.00 88.88 29953.00

303.02 Typha each 178.00 111.1 19776.00

303.03 Prime cost for Artistics sclpture/Mural Purchase in open marlet along with Committee formed by Engineer in charge & fixed/placing at all heights & levels as Directed By Engineer

in ChargedLump sum 1.00 10000000.00 10000000.00

304.00 NA NA

304.01 NA NA

305.00 NA NA


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

306.00 NA NA

307.00 NA NA

308.00 NA NA

309.00 NA NA

310.00 NA NA

311.00 NA NA

312.00 NA NA

313.00 NA NA

314.00 NA NA

315.00 NA NA

316.00 NA

317.00 NA NA

318.00 NA NA

318.01 NA NA

318.02 NA NA

319.00 NA NA

SUB HEAD -I :SANITARY INSTALLATION

319.01 Supplying, fitting and fixing Orissa pattern water closet in white glazed vitreous chinaware of approved make in position complete excluding 'P' or 'S' trap (excluding cost of

concrete for fixing).Size-536x410mmNos. 43.00 1522 65446.00

319.02 Supplying, fitting and fixing 10 litre PVC low-down cistern of 'approved make with either side or bottom inlet, side overflow, brackets complete with all internnal PVC fittings.

320.00 White Nos. 43.00 1015 43645.00

321.00 Suppling, fitting and fixing WALL HUNG TYPE water closet (European type) size - 500x360x350 mm of white glazed vitreous chinaware of approved make and brand in position

complete with necessary nut and boalts (MODEL CARAT of CERA or equivalent.)Nos. 399.00 3560 1420440.00

321.01 Supplying, fitting and fixing 10 litre porcelain low-down cistern of 'approved make with either side or bottom inlet, side overflow, brackets complete with all internnal PVC fittings.

Nos. 399.00 2297 916503.00


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

322.00 Providing and fixing health faucet with braided 1200mm long for European water closet. (Hindware F-160001, with 1.20M long Stainless Steel) braided. Nos. 399.00 1138 454062.00

323.00 Supplying, fitting and fixing white vitreous china best quality approved make wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks,C.P. waste fittings of 32 mm dia.,

one approved quality brass C.P. pillar cock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approved quality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long

approved quality P.V.C. connection pipe with heavy brass C.P. nut including mending good all damages and painting the brackets with two coats of approved paint.

323.01 (ii) 550 mm X 400 mm size Nos. 438.00 2208 967104.00

324.00 Providing and fixing P.V.C. waste pipe for sink including P.V.C. waste fittings complete.

324.01 50 mm dia Nos. 113.00 75 8475.00

325.00 Supplying, fitting and fixing best quality Indian make mirror 5.5 mm thick with silvering as per I.S.I. specifications supported on fibre glass frame of any colour, frame size 550 mm X

400 mm

Sqm 222.00 613 136086.00

326.00 Supplying, fitting and fixing stainless steel sink complete with waste fittings and two coats of painting of C.I. brackets.

326.01 (a) Sink only

326.02 (ii) 630 mm X 550 mm X 180 mm Nos. 27.00 3788 102276.00

(b) Sink with drain board 1050 mm X 450 mm X 180 mm Nos. 86.00 5006 430516.00(b) Sink with drain board 1050 mm X 450 mm X 180 mm Nos. 86.00 5006 430516.00

327.00 Supplying, fitting & fixing Cast iron soil pipe only conforming to I.S. 3989/ 2009 with nails etc. including making holes in the wall, floor etc. and cutting trenches etc. in any floor

through masonry concrete, if necessary, and mending good damages with necessary jointing materials and painting two coats to the exposed surface with approved paint

complete. (Measurement will be made along the center line of the total pipe line in fitted condition including specials,payment for specials.

With dripseal joints.

327.01 150 mm dia. (internal) metre 355.00 1469 521495.00



328.00 Supplying, fitting & fixing H.C.I. heel rest bend conforming to I.S.S. including jointing complete and painting two coats to the exposed surface with approved paint complete.

(Payment of Painting will however be paid seperately)-(a) With valamoid joints including sealing the topwith cement mortar (4:1)

328.01 100 mm Nos. 126.00 550 69300.00

328.02 150mm Nos. 14.00 996 13944.00

329.00 Supplying, fitting & fixing Centrifugally Cast (spun) iron vent cowl conforming to I.S. 15905 / 2011 including all joining materials but excluding coupling.

329.01 150 mm dia. Nos. 13.00 673 8749.00

329.02 100 mm dia. Nos. 126.00 311 39186.00

330.00 Providing and fixing M.S. stays and clamps for sand cast iron/centrifugally cast (spun) iron pipes of diameter :

330.01 100 mm Nos. 126.00 62 7812.00

330.02 150 mm Nos. 13.00 150 1950.00

331.00 Supplying,fitting and fixing cast iron 'P' or 'S' trap conformimg to I.S. 3989/ 2009 including dripseal joints and painting two coats to the exposed surface.

331.01 P' Trap

331.02 75 mm Each 785.00 602 472570.00

331.03 100 mm Each 82.00 948 77736.00


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

332.00 Providing and fixing PVC 75mm X 75mm floor trap for Lab, Jointing complete all respects. Each 45.00 550 24750.00

333.00 Providing and fixing CP liquid soap container complete all respects (Hindware F87001) Nos. 229.00 804 184116.00

334.00 Providing and fixing CP Towel rack of approved quality complete all respects (Hindware F890012) Nos. 62.00 1400 86800.00

335.00 Supplying, fitting & fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610x390x370 mm having pre & post flushing with water (250 ml & 350

ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-Charge.

(Model:Senso Art of Hindware or similar brand.) [Note: This work should not be executed without specific permission of Superintending Engineer.]335.01 15 mm normal bore Each 224.00 13215 2960160.00

336.00 Supplying, fitting and fixing bib cock or stop cock.

336.01 (h) Supplying, fitting and fixing of Chromium plated Turn type single lever concealed Diverter with lever, tip ton knob and flange of approved brand and make. (ii)

Concealed Part:- (Model Code No. F4010105 of CERA or equivalent)Each 112.00 2034 227808.00

337.00 Providing and fixing Urinal partition (Hindware -61001) Each 202.00 1186 239572.00

338.00 Supplying, fitting and fixing shower of approved brand and make.

338.01 (b) Chromium plated Rose shower with revolving joint and 150 mm long shower arm (Equivalent to Code No. 5489 & Model - Florentine of Jaquar or similar brand). Each 100.00 1412 141200.00

339.00 Supplying, fitting and fixing pillar cock of approved make.339.00 Supplying, fitting and fixing pillar cock of approved make.

339.01 e) (i) CP Centre hole Basin mixture with regular spout without popup waste system with 450 mm long braided hoses. (Equivalent to Code No.5167(B) & Model - FLORENTINE of

JAQUAR or similar brand).Each 11.00 2458 27038.00

339.02 c) CP Pillar Cock - 15 mm. (Code No. 5011 & Model - FLORENTINE of JAQUAR or equivalent). Each 431.00 857 369367.00

340.00 Supplying, fitting & fixing Centrifugally Cast (spun) iron soil,waste water and rain water (Hubless) pipe epoxy coated inside & outside conforming to I.S. 15905 / 2011 with bobbins,

nails etc. including making holes in the wall, floor etc. and cutting trenches etc. in any floor through masonry concrete, if necessary, and mending good damages with necessary

jointing materials and painting two coats to the exposed surface with approved paint complete. (Measurement will be made along the center line of the total pipe line in fitted

condition including specials,payment for specials & Painting will however be paid seperately).

340.01 75mm dia Metre 360.00 699 251640.00

340.02 100 mm dia Metre 490.00 852 417480.00

340.03 150mm dia Metre 3240.00 1425 4617000.00

340.04 Providing and fixing Astral make (Silence) Rain Water Pipe and waste pipes 6 kg/sq.cm with one end plain and other and socketed with injection moulded / fabrication/ Fittings

such as tees, bends, doors, cleanout plug jointing and provided with square grooved and alongwith the wall and flooring wherever necessary. The wall thickness of the and other

technical characteristics shall be conforming to manufacturer's specifications, complete all respects.

340.05 75mm dia (Waste Pipe)socketed pipe) Metre 568.00 135.47 76947.00

340.06 40 mm (Waste Pipe) Outer dia for waste uPVC, ISI 4985 Metre 360.00 26.16 9418.00

340.07 32 mm (Waste Pipe) Metre 805.00 21.94 17662.00

341.00 Providing and fixing 3 Way Wall diverter with provision for O/H Shower complete.

341.01 Hindware Diverter F 850035 Each 100.00 3194 319400.00

341.02 Exposed part F 150025 Each 100.00 2000 200000.00

341.03 spout F 130007 Each 100.00 750 75000.00

342.00 Providing and fixing hand dryer (Euronics EH 05M). Each 122.00 9004 1098488.00

343.00 Supplying, fitting and fixing complete Bottle waste trap (Heavy Quality) (a) Chromium plated Bottle trap 32 mm with 190 mm long connecting pipe and wall flange (Equivalent to

Code No. 545 & Model - Tropical / Sumthing Special of ESSCO or similar brand).Each 438.00 629 275502.00


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

344.00 Providing and fixing toilet paper holder (Hindware F84009) Rear Roll type size 150x150mm Each 399.00 384 153216.00

345.00 Supplying, fitting and fixing of BATH TUB 1800x920x400 mm) of Approved make or brand. (Model Code no. - B2520106 of CERA or Equivalent) Each 1.00 14200 14200.00

SUB HEAD -II : WATER SUPPLY

346.00 Providing and fixing C.P. brass angle valve for basin and geyser points of approved quality conforming to IS:8931.

346.01 15mm nominal bore Each 1279.00 292 373468.00

347.00 Providing and fixing PVC connection pipe with unions :

347.10 45 cm length Nos. 1279.00 68 86972.00

348.00 Providing and fixing CILA pipe IS 1536 with complete fitting jointing with dripseal joints excavation, refill, complete all respects.

348.10 150 mm dia Metre 170.00 1622 275740.00

348.20 200 mm dia Metre 190.00 2751 522690.00

349.00 Providing and fixing butterfly valve (Manual) with C.I. body SS disc. Nitrile rubber seal O-Ring PN 16 pressure rating for water circulation as specified.

349.10 80 mm dia Each 18.00 2404 43272.00

349.20 100 mm dia Each 18.00 3040 54720.00

350.00 Providing and fixing Elastomeric Nitrile rubber on hot water supply pipe, thermal conductivity of elastomeric nitrile rubber not exceed 0.0313 Kcal at average temperature of 30 deg

C, temperature gauge of (-) 40 deg C to 105 deg C complete all respects.350.10 15 mm Metre 360.00 232 83520.00

350.20 20 mm Metre 350.00 244 85400.00

350.30 25 mm Metre 150.00 260 39000.00

351.00 Providing and fixing steel pipes 304 and fitting conforming to JIS 3448 standard complete with press type fitting for hot and cold water supply system capable to withstand

temperature upto 130 deg,centigrade and pressure up to 10-12 bars and pickled stainsteel sheet with ends deburred at 90 deg. Pipes qualifing to 100% eddy current ,100%

hydrostatic test tested and airunder water tested 10 kgs. FItting conforming to JWWA G 116 standard in 304 grade stainless steel such as tee,coupling,elbow , coupling,male

adopter ,connection etc. with "O' ring of EPDM matrial withstand temperature upto (-)5 Deg, to 130 deg deg. centigrade of Jindal or equavalent approved make including suitable

connections as per site requirement , flanges, clamps with hangers a spacing of 2 m centre to centre min. necessary adopters for GI/CPVC and CP fittings,jointing,sundering,

cutting holes,in wall/floor/slabs and making good the wall, including connctions to GI/CPVC pipes, complete all respects.

351.01 15 mm nominal outer dia .Pipes. Metre 1570.00 300 471000.00

351.02 20 mm nominal outer dia .Pipes. Metre 1405.00 475 667375.00

352.00 Providing and fixing Solenoid Valve with Level Controller and electrical Wire upto 15m long of approved quality complete all respect.

352.01 25 mm Each 6.00 6500 39000.00

352.02 32 mm Each 2.00 8500 17000.00

352.03 40 mm Each 10.00 10000 100000.00

352.04 50 mm Each 12.00 12000 144000.00


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

353.00 Providing and fixing vertical geyser make Venus.

353.01 25 Ltrs Each 67.00 6300 422100.00

353.02 50 Ltrs Each 3.00 11425 34275.00

353.03 35 Ltrs Each 55.00 8990 494450.00

354.00 Providing and fixing CP grating 270 x 270 mm with Khurah, complete all respects Each 174.00 1200 208800.00

355.00 Providing and fixing Gun metal gate valve with CI wheel of approved quality (screwed)

355.01 80 mm nominal bore Each 36.00 5591 201276.00








356.00 (A)-(II) G.I. PIPE WORKS AND FITTINGS

Supplying, fitting and fixing G.I. pipes of TATA make with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket,

reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings

as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe lineas required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line

including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately)

For Exposed Work

356.01 15 mm dia. medium quality Metre 130.00 192 24960.00








356.09 100 mm dia. heavy quality Metre 275.00 1033 284075.00

357.00 For concealed work


357.02 32 mm dia. medium quality

358.00 Painting to GI pipes and fitting with two coats of enamel paint after of two coats of primer of approved quality.

358.01 15 mm dia. medium quality Metre








358.09 100 mm dia. heavy quality Metre


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

359.00 For concealed work



360.00 Supplying, fitting and fixing shower of approved brand and make. (e) Chromium plated double coat Hook(Equivalent to Code No. 35761 & Model - KUBIX of Jaquar or similar).

Nos. 75.00 516 38700.00

361.00 Supplying, fitting and fixing bib cock or stop cock. (c) (i) Chromium plated Bib Cock (angular shape with wall flange) (Equivalent to Code No. 5037 & Model - Florentine of Jaquar or

similar brand). Each 142.00 861 122262.00

362.00 Providing and fixing R.O. unit cap 100 ltrs/hr with SS water cooler . Complete all respects Each 37.00 24400 902800.00

EXTERNAL PLUMBING

EXTERNAL WATER SUPPLY DOMESTIC, FLUSHING, IRRIGATION, PIPE FROM TUBEWELL, SEWERAGE & STORM WATER SYSTEM

363.00 Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the

excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and

disposing of surplus excavated soil as directed, within a lead of 50 m :

363.01 All kinds of soil

363.02 Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia Metre 2075.00 225.45 467809.00363.02 Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia Metre 2075.00 225.45 467809.00

363.03 Pipes, cables etc. exceeding 300 mm dia. but not exceeding 600 mm dia Metre 1200.00 352.00 422400.00

363.04 Pipes, cables etc. exceeding 600 mm dia. but not exceeding 800 mm dia Metre 325.00 475.00 154375.00

364.00 Extra excavation in trenches for pipes in all kind of soil depth excluding 1.5m but not exceeding 3.5m.

365.00 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) around pipes including bed concrete as per standard

design:

365.01 100 mm diameter R.C.C. pipe Metre 50.00 622.95 31148.00


365.03 250 mm diameter R.C.C. pipe Metre 1000.00 1027 1027000.00



365.06 600 mm diameter RCC Pipe Metre 1000.00 1300 1300000.00

365.07 800 mm diameter RCC Pipe Metre 525.00 1800 945000.00

366.00 Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand)

including testing of joints etc. complete :








367.00 Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate

20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar

1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate

20mm nominal size) finished with a floating coat of neat cement complete as per standard design :


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

367.01 Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight

of cover 23 kg and weight of frame 15 kg) :

367.02 With bricks conforming to IS : 4885 Each 80.00 8634.1 690728.00

368.00 Extra for depth for manholes

368.01 Size 90x80 cm

368.02 With bricks conforming to IS : 4885 Metre 40.00 5718.6 228744.00

369.00 Constructing brick masonry circular type manhole 0.91 m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement :4 coarse sand), in side cement plaster 12 mm

thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone

aggregate 40 mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with

a floating coat of neat cement, all complete as per standard design :

369.01 0.91 m deep with S.F.R.C. cover and frame (heavy duty, HD-20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not

less than 182 kg., fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete.

(Excavation, foot rests and 12mm thick cement plaster at the external surface shall be paid for separately) :


370.00 Extra depth for circular type manhole 0.91m internal dia (at bottom) beyond 0.91 m to 1.67 m

370.01 With bricks conforming IS : 4885 Metre 10.00 4911.8 49118.00

371.00 Constructing brick masonry circular manhole 1.22 m internal dia at bottom and 0.56 m dia at top in cement mortar 1:4 (1 cement :4 coarse sand) inside cement plaster 12 mm thick

with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement foundation concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40

mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coatmm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat

of neat cement, all complete as per standard design :

371.01 1.68 m deep with SFRC Cover and frame (heavy duty HD-20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less

than 182 kg. fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (Excavation,

foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) :

371.02 With bricks conforming IS : 4885 Each 75.00 16560.8 1242060.00

372.00 Extra depth for circular type manhole 1.22 m internal dia (at bottom) beyond 1.68 to 2.29 m

372.01 With bricks conforming IS : 4885 Each 20.00 6362.65 127253.00

373.00 Constructing brick masonry circular manhole 1.52 m internal dia at bottom and 0.56 m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand) inside cement plaster 12 mm thick

with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40

mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat

of neat cement, all complete as per standard design :

373.01 2.30 m deep with SFRC Cover and frame (heavy duty HD- 20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less

than 182 kg. fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (Excavation,

foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) :

(a) With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 25.00 35380.05 884501.00

`

374.00 Extra depth for circular type manhole 1.52 m internal dia (at bottom) beyond 2.30 m :

374.01 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Metre 5.00 15028.55 75143.00

375.00 Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910, on 12 mm dia steel bar conforming to IS : 1786, having minimum cross

section as 23 mmx25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by

ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and

chemical resistance test as per specifications and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm

cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design. Each 1150.00 327.9 377085.00

376.00 Providing and fixing square-mouth S.W. gully trap class SP-1 complete with grade 'A'’ complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of

300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design :


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

376.01 150 x 100 mm size P type.


377.00 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes

jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.

377.01 20 mm nominal outer dia Pipes Metre 500.00 143 71500.00




377.05 50 mm nominal outer dia Pipe Metre 1500.00 658 987000.00

377.06 75 mm nominal outer dia Pipe Metre 20.00 1201.05 24021.00

378.00 Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm. top diameter,

160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c

necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand:10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement

: 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design :

378.01 With common burnt clay Each 25.00 11842.75 296069.00

379.00 Constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal grating

with frame complete as per standard design :

379.01 With common burnt clay bricks of class designation 7.5 Each 350.00 4043.1 1415085.00

380.00 Constructing brick masonry road gully chamber 110x50x77.5 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal380.00 Constructing brick masonry road gully chamber 110x50x77.5 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal

grating with frame and vertical grating complete as per standard design :

380.01 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 50.00 7522.15 376108.00

381.00 Providing and fixing gate valve tested water pressure 15kg/ sqcm. with C.I. wheel of approved quality (Screwed end)

381.01 32 mm nominal bore Each 20.00 500.75 10015.00




382.00 Providing and laying S&S Centrifugally Cast (Spun) / Ductile Iron Pipes conforming to IS : 8329 :

382.01 100 mm dia ductile Iron Class K-9 Pipes Metre 1900.00 958.95 1822005.00

382.02 80 mm dia ductile Iron Class K-9 Pipes

383.00 Providing and fixing Butterfly valves pressure 16 kg / sq. cm., complete all respects.

383.01 100 mm Each 10.00 6080 60800.00

384.00 Providing and fixing garden Hydrant 20mm self closing spring made of brass having self closing thermoplastic hinged lid, with valve box 300x300 with cover (heavy duty plastic)

with polyvinyl chloride reinforced and green top Each 49.00 5175 253575.00

385.00 Construction of Grease trap 3000x1000x1000 mm in brick work C. Mortar 1:4 (1 cement : 4 Coarse sand) including 3 Nos. 600 x 600 mm MH covers, RCC slab 1:2:4 complete as

per P - GTD 01 including perforated SS 304 grade removable trays, guide, internal tiling etc. Each 1.00 17000 17000.00

386.00 Providing and fixing enclosed type water meter (bulk type ) electronics conforming to IS : 2373 and tested by Municipal board complete with bolts , nuts, rubber insertions etc. ( The

tail piece will be paid separately)

386.01 80 mm dia nominal bore Each 1.00 3105 3105.00

386.02 100 mm dia nominal bore Each 1.00 4639 4639.00

386.03 50mm dia nominal bore Each 4.00 2800 11200.00


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

387.00 Supply, fitting and fixing in position G.I. pipes of Tata make for under ground works with all the necessary accessories, specials viz. socket bend, tea, union, cross, elbow, nipple,

short piece etc. including cost of the materials, jointing material, cutting pipes, making threads, cutting trenches upto 1.5m below surface of in all type of soil and refilling the same

as directed by the two coats of painting on G.I. pipes and specials with bituminous paint complete in all respect. (Payment will be made on the centre line measurement of the total

pipe line including all specials. No separate payment will be made for accessories, specials etc. Payments for painting will be made separately).

387.01 25 mm dia medium quality Metre 100.00 319 31900.00






388.00 Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work :

388.01 25 mm dia Metre






389.00 Providing and fixing sand of grading zone coarse grade, all round the G.I. pipes

389.01 25 mm dia Metre 100.00 69.5 6950.00

389.02 32 mm dia Metre 350.00 71.3 24955.00

389.03 40 mm dia Metre 300.00 72.25 21675.00389.03 40 mm dia Metre 300.00 72.25 21675.00

389.04 50 mm dia Metre 300.00 74.95 22485.00

389.05 65 mm dia Metre 400.00 118.3 47320.00

389.06 80 mm dia Metre 660.00 121.9 80454.00

390.00 SS Puddle Flanges for underground water tanks, Puddle - 6mm , 304 grade

390.01 50mm dia Nos. 1.00 145 145.00

390.02 65 mm dia Nos. 2.00 190 380.00

390.03 80 mm dia Nos. 5.00 220 1100.00

390.04 100 mm dia Nos. 8.00 265 2120.00

390.05 150 mm dia Nos.

390.06 200 mm dia Nos.

391.00 Supplying, fitting and fixing in position double seal C.I. Manhole cover with frame of approved make (Heavy type) for U.G. Tank and double seal OHT.

391.01 560 mm dia Each 30.00 3500 105000.00

Electrical

SUB-HEAD I : INTERNAL WIRING

392.00 Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR'

(Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Modular type switch (Brand

approved by EIC) fixed on Modular GI switch board with top cover plate and 2 no. suitable size “Ph & N” copper bar & earthing attachment fixed on wall incl. mending good

damages to original finish. Point

392.01 Average run 4.5 mtr 1968.75 1140.00 2244375.00

392.02 Average run 6 mtr 1968.75 1224.00 2409750.00

392.03 Average run 7.5 mtr 3940.50 1309.00 5158115.00


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

393.00 Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor

single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.

Point 2889.00 415.00 1198935.00

394.00 Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire, 2x56/0.3 (4 sqmm) + 1x36/0.3 (2.5 sqmm) as ECC

(Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required Metre 59670.00 95.00 5668650.00

395.00 Supply & Fixing 240 V, 6 A, 3 pin Modular type plug socket (Brand approved by EIC) with 6A Modular type switch, without plug top on 4 Module GI Modular type switch board with

3 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. Each 1314.00 377 495378.00

396.00 Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board

with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. Each 1735.00 456.00 791160.00

397.00 Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the

prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required

2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC Metre 24920.00 65.00 1619800.00

4x36/0.3 (2.5 sqmm) + 2x22/0.3 (1.5 sqmm) as ECC Metre 2080.00 128.00 266240.00

4x56/0.3 (4 sqmm) + 2x36/0.3 (2.5 sqmm) as ECC Metre 17620.00 187.00 3294940.00

2x84/0.3 (6 sqmm) + 1x56/0.3 (4 sqmm) as ECC Metre 2140.00 139.00 297460.00

4x80/0.4 (10 sqmm) + 2x84/0.3 (6 sqmm) as ECC Metre 2880.00 493.00 1419840.00

4x126/0.4 (16 sqmm) + 2x80/0.4 (10 sqmm) as ECC Metre 2900.00 795.00 2305500.00Metre 2900.00 795.00 2305500.00

398.00 Supplying and fixing of following sizes of medium class PVC conduit along with the accessories in surface / recess including cutting the wall and making good the same in case of

recessed conduit as required.

25 mm Metre 131940.00 69.00 9103860.00

32 mm Metre 8650.00 89.00 769850.00

40 mm Metre 640.00 114.00 72960.00

399.00 Supplying and fixing of following sizes of steel conduit along with the accessories in surface / recess including cutting the wall and making good the same in case of recessed

conduit as required.

399.01 25 mm Metre 9405.00 147.00 1382535.00

399.02 32 mm Metre 1835.00 198.00 363330.00

400.00 Supply & Fixing 240V, Modular Socket (2 Module) type fan regulator (Step type) (Brand approved by EIC) on existing Modular GI switch board with top cover plate incl. making

necy. connections etc. Nos. 1672.00 387.00 647064.00

401.00 Supplying & Fixing GI Modular Switch Board of the following sizes complete with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber

insulator over the MS welded chairs incl. top cover flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good

damages to building works.

401.01 2 Module Each 671.00 172.00 115412.00

401.02 4 Module Each 101.00 261.00 26361.00

401.03 6 Module Each 1858.00 332.00 616856.00

401.04 8 Module Each 253.00 406.00 102718.00

402.00 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

402.01 Supply & Fixing 240 V 6 A Modular type switch (Brand approved by EIC) on existing GI Modular type switch board having top cover plate and making necessary connections as

required. Each 82.00

402.02 15/16 amp switch Each 2112.00 114.00 240768.00


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

402.03 Supply & Fixing 240 V, 6A, 5 pin Modular type plug socket (Brand approved by EIC), without switch & plug top, on existing GI Modular type switch board with top cover plate and

making necy. connections with PVC Cu wire and earth continuity wire etc. Each 4224.00 120.00 506880.00

402.04 Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch, on existing GI Modular type switch board with top cover plate

and making necy. connections with PVC Cu wire and earth continuity wire etc. Each 253.00 162.00 40986.00

402.05 TV antenna socket outlet Each 74.00 97.00 7178.00

402.06 Supply & Fixing Telephone socket (RJ11) Modular type (Brand approved by EIC) on existing GI Modular board having top cover plate and making necessary connections as

required. Each 581.00 96.00 55776.00

403.00 Supplying and fixing DP sheet steel enclosure on surface/recess along with 25/32 A, 240 V “C” curve DP MCB complete with connections, testing and commissioning etc. as

required. Each 12.00 627.00 7524.00

404.00 Supply & Fixing 240 V, 25 A, Modular type starter (Brand approved by EIC) with 25A Modular switch type DP MCB (CCurve) and 4 Module GI Modular type switch board with 4

Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.Each 113.00 784.00 88592.00

405.00 Supplying and fixing 32 Amps Inter-locked Switched Socket, 415 Volts, along with DIN rail & Surface Mounting box, IP 66, etc complete with connections, testing and

commissioning etc. as required. Each 3.00 8871.00 26613.00

406.00 Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as

required.

200 mm X 250 mm X 75 mm deep Each 270.00

407.00 Supplying & Drawing 2-pair Telephone cables with high density polyethylene insulated solid annealed high conductivity bare copper of dia 0.5mm in prelaid PVC rigid conduit/ in

polythene pipe embeded in wall.

407.01 2 Pair Metre 11780.00 16.00 188480.00

408.00 Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the

existing surface/ recessed steel/ PVC conduit as required. Metre 1520.00 29.00 44080.00

409.00 Supply & fixing of telephone tag (Krone make) block with required size box with lockable cover.

409.01 10 pair Each 9.00 1004.00 9036.00

409.02 20 pair Each 4.00 1352.00 5408.00

409.03 30 pair Each 3.00 1742.00 5226.00

409.04 50 pair Each 11.00 2620.00 28820.00

409.05 100 pair Each 3.00 5155.00 15465.00

409.06 200 pair Each 3.00 10125.00 30375.00

410.00 Supplying & Fixing 240 V AC/DC superior type Multitune (min 10 nos. tune) Call Bell (Anchor) with selector switch for single/Multi Tunes mode, Battery operated on HW board incl.

S&F HW board Each 16.00 294.00 4704.00

SUB-HEAD II : DISTRIBUTION BOARDS & PANELS

411.00 Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl.

Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment.

2+4 way Each 2.00 1186.00 2372.00

2+8 way Each 2.00 1477.00 2954.00


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

412.00 Supplying and fixing double door Vertical TPN MCB Distribution board for MCCB incomer with IP-42/43 protection, on angle iron frame on wall & mending good the damages to

original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. (Up to 160A)

412.01 4 WAY Each 87.00 8,627.00 750549.00

412.02 6 WAY Each 111.00 10,683.00 1185813.00

412.03 8 WAY Each 84.00 14,020.00 1177680.00

413.00 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, 'C' curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with

connections, testing and commissioning etc. as required.

413.01 Single pole Nos. 6616.00 173.00 1144568.00

413.02 Double pole Nos. 4.00 463.00 1852.00

414.00 Supplying and fixing single pole, blanking plate in the existing MCB DB complete etc. as required Nos. 122.00 7.00 854.00

415.00 Supplying and fixing of following MCBs, 415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with

connections, testing and commissioning etc. as required.

415.01 40A 4P MCB Nos. 118.00 919.00 108442.00

415.02 63A 4P MCB Nos. 164.00 919.00 150716.00

416.00 Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, RCCB, having a sensitivity current up to 300 milliamperes in the existing MCB DB complete

with connections, testing and commissioning etc. as required.

416.01 40 amps416.01 40 amps Nos. 117.00 2131.00 249327.00

416.02 63 amps Nos. 166.00 2302.00 382132.00

417.00 Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB

DB complete with connections, testing and commissioning etc. as required.

417.01 25 amps Each

417.02 40 amps Each 8.00 1719.00 13752.00

Sub-Head - III : L. T. Panels & Bus Duct

418.00 Supply, erection, testing & commissioning of main LT Panel fully compartmentalized cubical type, 14 SWG thick (folded joints construction) steel clad floor mounted totally

enclosed, extendable on both sides switch board with top and bottom busduct/cable entry, separate base frame suitable for use on 415V 3 phase 4 wire 50 c/s system having

50KA fault capacity, housed with incoming and outgoing Aluminium bus bars, interconnection, interlocking between feeders etc., with indication lamps, push buttons, timers,

selector control switch necessary accessories etc. including supply and fixing of base channels of 100x50x6mm as required and complete with following incoming and outgoing

switchgears with protection, metering etc. and also compatible to PC/PLC/BMS with communication port RS-485, complete as required and as per specification and schematic

diagram complete as required.

(Main L.T. Panel)

418.01 Transformer Incomer feeder - 2 nos. Each shall be equipped as:

1 No. 3200A, 50KA, 4-pole draw out type electrically operated air circuit breaker with 230V A.C. spring charged motor and micro processor based O/C, S/C & E/F releases with

communication through RS 485 port compatible with PLC/PC/BMS.

418.02 1 No. 24V D.C. shunt release

418.03 1 No. 230V A.C. closing coil

418.04 1 No. 230V A.C. under voltage & over Voltage release alongwith set of timers.

418.05 1 No. Multifunction meters with all parameters including MDI indication, communication through RS 485 port compatible with PLC/PC/BMS.

418.06 3 nos. CTs 3200/5A , 15 VA , Class - 1 for metering

418.07 1 Set CTs 3200/5A , 15 VA , Class - 1 for power factor.


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

418.08 1 Set Breaker Control Switch. ( TNC )

418.09 1 Set Auto-Off- Manual Switch

418.10 1 Set push buttons

418.11 1 no Master trip relay

418.12 1 Set CT of class 5P 20,15 VA burden with restricted earth fault relay.

418.13 1 Set Potential Transformer.

VISUAL INDICATION

418.14 Phases

418.15 Breaker ON-OFF-TRIP, breaker in service, control ckt healthy (AC) & control ckt healthy(24V DC)

418.16 Spring charged/discharged

418.17 Breaker in Test Position.

A2 DG Incomer feeder- 2 nos. each shall be equipped with :-

418.18 1 No. 3200 Amps, 50KA, 4P, drawout type electrically operated air circuit breaker 240V AC spring charging motor and micro processor based O/C, S/C & E/F releases

communication through RS 485 port compatible with PLC/ PC / BMS etc.

418.19 1 No. 24V DC shunt release.

418.20 1 No. 240V Ac closing coil.

418.21 1 No. 415V A.C. under/over voltage release alongwith set of timers.

418.22 1 Set of restricted earth fault relay with set of CT's of 5P20, 15VA including control wiring.

418.23 1 Set of three phase differential relay with set of CT's of 5P20, 15VA including control wiring.

418.24 1 No. Multifunction meters with communication port RS-485 compatible with BMS.418.24 1 No. Multifunction meters with communication port RS-485 compatible with BMS.

418.25 3 nos CTs 3200/5A, 15 VA , Class - 1 for metering

418.26 1 Set of Auxiliary Potential transformer of 100VA & class-1.


418.28 1 Set Breaker control switch. (TNC)

418.29 1 Set Auto/Off/Manual Selector Switches

418.30 1 set push buttons

418.31 Visual Indication

418.32 Phase indication

418.33 Breaker ON-OFF-Trip-Trip ckt healthy

418.34 Spring charged/Discharged

418.35 1 set charger - boost cum float of suitable rating.

418.36 Load on mains

418.37 Load on DG Sets

A3 Solar Incomer feeder- 2 nos. each shall be equipped with :-

1 No. 250 Amps, 50KA, 4P MCCB with micro processor based O/C, S/C & E/F releases.

1 No. Multifunction meters with all parameters including MDI indication, communication through RS 485 port compatible with PLC/PC/BMS.

3 nos CTs 250/5A, 15 VA , Class - 1 for metering

Phase indicating lights with 2A MCB

Note:-

1. Interlocking between D.G. Sets and bus-couplers feeders shall be provided. Paralleling between D.G. feeders shall be provided as per requirement. Interlocking & co-ordination

between main L.T. Panel Board and D.G. sets shall be provided through PLC Panel & BMS system.

2. 4-Pole ACB's is acceptable in D.G. incoming feeders instead of 3 pole ACB's with power contactors in neutral bus.

3. Required no. of contacts, interfacing modules, power supply units, auxiliary relays etc. for PLC Panel, interlocking, synchronization etc. to be provided.

4. If the complex power load demand is more than the 95% of sanctioned load from SEB, one(1) No. D.G. set to be started automatically and shall be opened D.G. set Incoming

feeder be opened. Bus so that no time the contract demand of the complex will be exceed. Necessary controls, switches and relays to be incorporated in above Panel / Feeders.

5. Necessary required relays alongwith associated items should be supplied/incorporated in above panels to achieve to restricted the sanctioned demand of Power from SEB and

also control & instrumentation cables between H.T., L.T., PLC and D.G. set to be included in above panel.


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

6. No paralleling shall be provided between transformer feeders and D.G. & Transformer feeders. Accordingly Interlocking to be provided.

418.38 Bus Bar

1 Set of 4000A, 50KA, electrolytic Aluminum TPN bus bars complete as required as per SLD.

Bus Coupler - 1 No. & shall be equipped as :

1 No. 3200A 4 pole, 50KA draw out type electrically operated air circuit breaker with 230V A.C. spring charged motor and micro processor based O/C, S/C & E/F releases with

communication through RS 485 port compatible with PLC/PC/BMS etc.


418.40 1 No. 230V A. C, closing coil

418.41 1 Set Auto off manual switch.

418.42 1 Set Breaker Control switch.( TNC)

418.43 1 no Master Trip Relay

VISUAL INDICATION

418.44 Phases

418.45 Breaker ON-OFF-TRIP & trip ckt healthy (AC), breaker in service position & control circuit healthy(24VDC)

418.46 Spring charged/discharged

418.47 Breaker in test position.

D Outgoing Feeders (50KA)

418.48 3 Nos. 1250 Amps TPN EDO type ACB with M.R. releases for O/C, S/C & E/F. (Shunt trip/closing coil 24V DC/230V AC), ON, Off , Trip, control supply healthy (AC & DC), breaker

in service position, spring charged/discharged & breaker in test position indicating lamps and breaker control switch, local/remote selector switch, Multifunction meter with all

functions with set of CTs with communication port through RS-485 compatible with PLC/PC/BMS etc.

418.49 3 Nos. 1600 Amps TPN EDO type ACB with M.R. releases for O/C, S/C & E/F. (Shunt trip/closing coil 24V DC/230V AC), ON, Off , Trip, control supply healthy (AC & DC), breaker

in service position, spring charged/discharged & breaker in test position indicating lamps and breaker control switch, local/remote selector switch, Multifunction meter with all

functions with set of CTs with communication port through RS-485 compatible with PLC/PC/BMS etc.

418.50 2 Nos. 630A TPN MCCB with M.R.,O/C, S/C & E/F releases & indicating lamps & Multifunction meter with all functions with set of CTs etc. with communication port through RS-

485 compatible with PLC/PC/BMS.












S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.




485 compatible with PLC/PC/BMS. set 1.00 4690866.00 4690866.00

418.58 Supply, erection, testing and commissioning of cubical type CRCA sheet steel free standing indoor type capacitor control board with shunt capacitor hermetically sealed with

harmonic filter & discharge resister, aluminum bus bars & accessories with their connections. The panel shall be well ventilated, dust & vermin proof etc. as per specifications &

schematic diagram including provision to be made for interfacing with BMS etc. and complete as required with cable entry from bottom or bus-duct entry from top. (CAPACITOR

PANEL 600 KVAR - 1 &2).

Incomer feeder:

418.59 1 No 1250 A TPN ACB (50kA) with microprocessor based releases for O/C, S/C and E/F protection with communication port compatible with PLC/ PC / BMS etc.

1 No. Multifunction meters with communication port RS-485 compatible with BMS.


1 Set of control fuses with 3 Nos. Phase indication lights

b) Bus Bars:

418.61 Aluminium three phase and neutral bus bars rated at 2000 Amp.

c) Outgoing feeders:c) Outgoing feeders:

418.62 4 Sets of 250 Amp TP MCCB (50kA) with 250 A TP capacitor duty contactor with 230 V A.C. supply (Suitable for 100 KVAR capacitor bank).



418.65 14 Sets self illuminated Red-Green (ON-OFF) push buttons

418.66 3 Nos. 100 KVAR TP shunt capacitor (MPPXL) with 7% harmonic filter & discharge resistor.



418.69 1 No. 16 step APFC Relay with binary operation with communication port RS-485 compatible with BMS.

418.70 1 Set selector switch for auto-off manual Set 2.00 1121348 2242696.00

D.G. Panel & PLC Panel

419.00 Supply, erection, testing & commissioning of DG LT Panel fully compartmentalized cubical type,14SWG thick (folded joints construction) steel clad floor mounted totally enclosed

extendable on both sides switch board suitable for use on 415V 3 phase 4 wire 50 c/s system having 50 KA fault capacity, housed with incoming and outgoing aluminum bus bars,

interconnection, interlocking between feeders etc., with indication lamps, push buttons necessary accessories, all feeders protection & meters compatible to PC/PLC/BMS with

communication port RS-485 etc. as required and complete with following incoming and outgoing switchgears with protection and metering etc. as per specification and schematic

diagram including provision to be made for interfacing with BMS etc. providing & fixing of base channels of 100x50x6mm complete as required with cable entry from Top & bottom.

(DG LT Panel Located in stilt floor of lecturer staff block)).

a) DG Incomer feeders - 5 Nos. & each shall be equipped with :-

419.01 a-1) 1 No. 1250 Amps, TP, drawout type electrically operated air circuit breaker 240V AC spring charging motor and micro processor based O/C, S/C & E/F releases with neutral

disconnecting contactor with time delay (timer) with 8 NO + 8 NC auxiliary contactors (IDMTL + Hi-set ) communication port compatible with PLC/ PC / BMS etc.



419.04 1 No. 415V A.C. under/over voltage release.


419.06 1 No. Multifunction meters with communication port RS-485 compatible with BMS.



S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

419.08 1 Set of Auxiliary Potential transformer(P.T) of 100VA & class-1.











419.19 a-2) 1 No. 800 Amps, TP, drawout type electrically operated air circuit breaker 240V AC spring charging motor and micro processor based O/C, S/C & E/F releases with neutral

disconnecting contactor with time delay (timer) with 8 NO + 8 NC auxiliary contactors (IDMTL + Hi-set ) communication port compatible with PLC/ PC / BMS etc.



419.22 1 No. 415V A.C. under/over voltage release.




419.26 1 Set of Auxiliary Potential transformer(P.T) of 100VA & class-1.419.26 1 Set of Auxiliary Potential transformer(P.T) of 100VA & class-1.











b) Bus Bars

419.37 Aluminium three phase & Neutral bus bars rated at 4000 Amp.


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

c) Bus Couplers feeders - 1 No. & shall be equipped with

419.38 3200A, 4 pole, drawout type electrically operated intelligent air circuit breaker with 240V A.C. spring charged motor and microprocessor based O/C, S/C & E/F releases with

communication port compatible with PLC/ PC / BMS etc


419.40 1 No. 240V A. C, closing coil

419.41 1 Set Auto off manual switch.

419.42 1 Set Breaker Control switch. (TNC)

419.43 VISUAL INDICATION

419.44 Phases

419.45 Breaker ON - OFF - TRIP & trip ckt healthy

419.46 Spring charged / discharged

f) Outgoing Feeders

419.47 2 Nos. 2000 Amps 4P EDO type ACB spring charged with M.R. releases for O/C, S/C & E/F with communication port compatible with PLC/PC/BMS. 1 Set of ON, Off , Trip &

control supply healthy indicating lamps & breaker control switch, Multifunction meter with set of CTs with communication port compatible with PLC/ PC / BMS etc.

419.48 2 Nos. 400 Amps 4P EDO type ACB spring charged with M.R. releases for O/C, S/C & E/F with communication port compatible with PLC/PC/BMS. 1 Set of ON, Off , Trip &

control supply healthy indicating lamps & breaker control switch, Multifunction meter with set of CTs with communication port compatible with PLC/ PC / BMS etc.

g) PLC LOGIC CONTROL PANEL

419.49 Designing, fabricating, assembling, supplying, erecting, testing and commissioning of power command controller (similar to Cummins model PCC-3.3) based AMF, Auto load

sharing, auto load management through PLC. PLC shall also operate all DG Incomer, Transformer incomer, bus coupler & Main LT Panel, H.T. Panels and with programmed

operations as described in the Specifications complete as required.(PLC LOGIC CONTROL PANEL)

419.50 1nos. SLC 5/03 Processor

419.51 5 Nos. 32 Ch. Digital I/P Module

419.52 5 Nos. 32 Ch. Digital O/P Module

419.53 1 Nos. 16 Slot I/O Rack

419.54 1 Nos. Rack Power Supply

419.55 1 Nos. EEPROM

419.56 1 Nos. Window based Grafix Software Package

419.57 1 Lot. Comm. Cable

419.58 1 Lot. Cable & Accessories

419.59 1 Lot. Control & instrumentation Cable between PLC and all feeders. (i.e. L.T. Panels, H.T. Panel, Transformers, Local instruments etc.)

419.60 Above system components shall be housed in a control panel fabricated out of 2mm thick CRCA sheet cubicle complete with all accessories as per requirement, with relay

modules with operation interface with 2 Core Dual Computer with 160 GB HDD, Combo Drive, 17" TFT Colour Monitor, A-3 Colour Printer of Hp, 110 Keys Keyboard & mouse etc.

communicable cable, graphic station software, at least 2 KVA UPS backup by maintenance free batteries, PLC to PC communication card. The system should be suitable for

controlling all H.T. breakers, DG breakers, transformer breakers and bus couplers and outgoings in Main LT Panel and Incomming & Outgoing feeders of D.G. Auxiliary Panel as

required and as per the inter locking scheme in the drawings.

NOTES:

All required devices for inputs to and outputs from the PLC whether digital or analog required to operate the DG Sets and accessories as specified should be included in design

and costing.

BOQ given above is does not limit the bidder from including all such components as are necessary for proper and safe AMF, synchronizing, load management and load sharing in

both manual as well as Auto & PLC mode.


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

Automatic Mode

419.61 While the normal mains supply is healthy the diesel alternator set will be at rest and the load will be supplied by the mains. During this period, all the bus couplers will be in open

position.

419.62 The PLC system shall monitor the main supply voltage & if the main supply voltage drops below a certain preset value, the system shall sense these conditions & shall give

automatic start command to the control system.

419.63 After a time delay of 3.0 seconds from the main supply failure the diesel engine shall start.

419.64 When the DG set attains its rated speed and voltage a closing signal shall be given to the ACB of the DG set.

419.65 Before giving CLOSE command to ACB of DG set. The bus couplers will be given CLOSE command. At this point of time all the load will be on one DG.

419.66 Now the system will continuously monitor the total load on the DG system. If the load is more than the capacity of running DG, the another DG set will receive START command

and come in line to share the load.

419.67 The incoming DG will get synchronised with the running DG and all the DG's will share the load equally.

419.68 Depending on the total load on the DG system PLC will control the no. of DG sets running at any time. SO PLC will optimise the no. of DG sets running. (in operation)

419.69 When the voltage in the mains get restored, its quality is monitored for about one minute and if proven satisfactory the main supply breaker shall close automatically for retransfer

of the load from Diesel engine to the main supply at L.T. Panel but prior to this operation all DG's breakers & bus coupler should open & vice-a-versa. At this time, all the bus

coupler will be in OPEN position before the Mains ACB is CLOSED.

419.70 The set shall stop after idle running of one minute after restoration of main supply.

419.71 The diesel alternator set reverts to its standby conditions and is ready to start should the mains supply fail again.

SEQUENCE OF OPERATION (PLC)

419.72 AUTOSTART, AUTOSYNCHRONIZING

419.73 AUTO LOAD SHARING AND LOAD MANAGEMENT

419.74 On failure of GRID Supply All grid ACB's shall be switched Off. And all BUS COUPLER ACB's shall be Switched ON automatically.

419.75 On failure of Grid supply DG-1 shall start automatically & close its ACB/NIC & shall Start Feeding the Load.

419.76 On attaining the preset load the DG - 2 shall start automatically.

419.77 Voltage & Frequency of DG-2 shall be monitored & necessary commands shall adjust the parameters of DG -2 with BUS.

419.78 AUTO Synchronizing System shall verify the phase angle of both running sets & also compensate for ACB closing time by initiating closing of the breaker ahead of the actual

predictable synchronism thereby ensuring a phase difference of zero degree.

419.79 System shall also monitor the slip frequency and the Beat voltage of the machine or system.

419.80 Neutral Isolating Contactor (NIC) of first DG shall remain in ckt. In case of manual tripping or tripping of DG set under fault condition NIC of any other DG shall close first before

tripping NIC of first set.


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

419.81 It shall be possible to alter sequence of DG set starting through manual selectors or through Man Machine Interface.

419.82 Active power is made equal on both the machines automatically with the help of ACTIVE LOAD BALANCING System through Governor control.

419.83 Reactive power is balanced automatically with the help or quadrature droop kit already fitted on the machine.

419.84 However if quadrature droop system is not functioning accurately, REACTIVE LOAD BALANCING SYSTEM shall control the motorised Potentiometers to achieve KVAR regulation

within preset Band.

419.85 In event of set failing to synchronize, Alarm from Annunciator would invite attention of OPERATOR for Manual Intervention.

419.86 LOAD MANAGEMENT SYSTEM shall have 6 output contacts for tripping various loads by field wiring and also drip the ACB of different DG sets and give ALARM for shutting OFF

DG in accordance with predefined parameters to avoid underloading, over loading, cascading effect of tripping & unnecessary FUEL WASTAGE.

419.87 On Restoration of GRID Supply, DG ACB's & Bus Coupler ACB shall be switched OFF preset sequence with time delays to cover DIPS & Grid supply ACB's shall be switched ON.

DG sets shall continue to run for 3 minutes after DG ACB has been switched OFF.

419.88 It shall be possible to alter crucial settings / time delays through. MAN MACHINE INTERFACE.

419.89 PLC, Annunciation System, Protection system & metering system shall have compatibility for interface with PC for Graphic Displays/Report Generation.

419.90 SYSTEM shall have semi auto mode & TOTAL MANUAL OVERRIDE.419.90 SYSTEM shall have semi auto mode & TOTAL MANUAL OVERRIDE.

419.91 All Sets starting simultaneously to avoid overload and tripping of single set, monitor the load for 2 or 3 minutes and based on demand load extra sets should go off time to maintain

optimum loading feeder

419.92 Manual synchronizing with all required accessories and protection including synchronizing relay, Complete wiring between PLC, D.G. Sets & Main L.T. Panel etc. complete as

required. Set 1.00 1730768.00 1730768.00

Block Panels

420.00 Supply, erection, testing & commissioning of cubicle type Panel fabricated (folded joints construction) out of 14 SWG CRCA sheet steel floor mounted totally enclosed extendable

on both sides switchboard of uniform width with top and bottom cable entry and suitable for use on 433 V 3 phase 4 wire 50 c/s having 50KA fault capacity complete and housed

with Aluminium bus bar equipments and their accessories including supply and fixing of base channels of 100x50x6mm as required and with following incoming and outgoing

switchgear with protection, metering etc. and also compatible to PC/PLC/BMS with communication port RS-485, complete as required and as per specification and schematic

diagram complete as required.

Auditorium Panel (Located at Second Floor)

A)Incomer - 1 no. & each shall be equipped with

420.01 1 No. 200A, 36KA, 4-pole MCCB with micro processor based O/C, S/C & E/F releases.

420.02 1 No. Multifunction meters with all parameters including MDI indication, communication through RS 485 port compatible with PLC/PC/BMS.

420.03 3 nos. CTs 200/5A , 15 VA , Class - 1 for metering

420.04 Phase indicating light

B)Bus Bars

420.05 Aluminium three phase & Neutral bus bars 250 Amp; 415V, 50Hz.


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

C)Outgoing Feeders

420.06 8 Nos. 63A, 4P MCB

420.07 7 Nos. 40A, 4P MCB Each 1.00 94945.00 94945.00

421.00 Main UPS Panel

Incomer feeders - 2 nos & each shall be equipped with

421.01 1 No. 250 Amps, 35kA, 4-pole MCCB with M.R. releases for O/C, S/C & E/F.

421.02 1 No. 250 Amps 4-pole power contactor with required no. of auxiliary contactors.

421.03 Breaker ON-OFF-Trip-Trip ckt healthy indicating lamps.



421.06 1 set of Auto/Manual selector switch

421.07 1 set of phase indicating lamps.

421.08 1 set -10A power pack unit

Bus Bars

421.09 Aluminium three phase & Neutral bus bars rated at 300 Amp.

Bus Couplers feeders - 1 No & each shall be equipped with

421.10 250A, 4-pole, 35kA, MCCB with M.R. releases for O/C & S/C one set of ON, OFF & Trip & control supply healthy indicating lamps.

421.11 1 No. 250 Amps 4-P power contactor with required no. of auxiliary contactors.

421.12 Breaker ON-OFF-Trip-Trip ckt healthy indicating lamps.421.12 Breaker ON-OFF-Trip-Trip ckt healthy indicating lamps.

421.13 1 set of Auto/Manual selector switch

421.14 Note:- Interlocking between Incomers and bus-couplers feeders shall be provided.

Outgoing Feeders

421.15 6 Nos.125 Amps 36kA, 4-Pole, MCCB with M.R. releases for O/C, S/C & E/F. 1 Set of phase indicating lamps, Multifunction meter with set of CTs with communication port

compatible with PLC/ PC / BMS etc. Set 3.00 1878212.00 5634636.00

422.00 UPS Distribution Panel

422.01 Incomer feeders - 2 nos & each shall be equipped with

422.02 2 Nos. 125 Amps 4 pole MCCB, 35KA with M.R. releases for O/C, S/C & E/F.

422.03 Phase indicating lamps (R, Y, B) - 1 Set


422.05 3 Nos. CTs 125/5A Class 1.0 for metering.

Bus Bars

422.06 Aluminium three phase neutral bus bars rated at 250A, 35KA

Outgoing feeders

422.07 11 Nos. 63A,4P MCB

422.08 11 Nos. 40A,4P MCB Set 3.00 255494.00 766482.00


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

Lift Panels-1(Typical)

423.00 Supply, Installation, Testing & Commissioning of cubicle type compartmentalised panel board made out of 2mm thick CRCA sheet, totally enclosed, IP 42, floor mounted with

suitables channel base frame, dust and vermin proof, indoor, suitable for operation on 415 V, 50Hz AC supply, bottom base channel of M.S. section not less then 100 mm x 50 mm

x 5 mm thick with 300 A 4 Strip Aluminium busbars i/c cleaning and finishing complete with seven tank process, powder coating of approved shade and colour including control

wiring with 2.5 sq mm copper conductor FRLS. cable, interconnection, earthing, labelling etc. including supply & installation of following switchgears, metering instruments and

accessories as per specifications. ( 450 mm deep minimum) as required.

A. INCOMING:

423.01 a) 1No. 125A, 4P MCCB (36KA) microprocessor based released (O/C, S/C & E/F releases with pase indicating lamps, Multifunction Meter with communication port & set of CT's.

B. INSTRUMENTS

423.02 i) 1 No. Multifunction Meter with all functions with communication port.

423.03 ii) 3 Nos. CT's 125/5A accuracy Class-I, 15VA Burden

423.04 iii) LED type, Three phase indication lights (R,Y,B), with MCB.

423.05 iv) 125A, 4pole Automatic change over Switch.

C. BUS Bar :


D. OUTGOING :

423.07 i) 3 Nos. 63A, 4P, MCB

423.08 ii) 1 No. 32A, DP, MCB

423.09 iii) 6 Nos.6-32A, SP MCB's Set 3.00 200275.00 600825.00

Lift Panels-2 (Typical)Lift Panels-2 (Typical)






A. INCOMING:

424.01 a) 1No. 100A, 4P MCCB (36KA) microprocessor based released (O/C, S/C & E/F releases with pase indicating lamps, Multifunction Meter with communication port & set of CT's.

B. INSTRUMENTS




424.05 iv) 100A, 4pole Automatic change over Switch.

C. BUS Bar :


D. OUTGOING :

424.07 i) 2 Nos. 63A, 4P, MCB

424.08 ii) 1 No. 32A, DP, MCB

424.09 iii) 4 Nos.6-32A, SP MCB's Set 9.00 186923.00 1682307.00

(Floor Panels) - Sports Complex





accessories as per specifications. ( 450 mm deep minimum) as required. (Block Panel-Sports Complex).


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

A. INCOMING:

425.01 a) 200A, 4P MCCB (36KA) microprocessor based released (O/C, S/C & E/F protection).

B. INSTRUMENTS




C. BUS Bar :


D. OUTGOING :

425.06 i) 4 Nos. 63A 4P MCB, 10KA

425.07 ii) 2 Nos. 40A 4P MCB, 10KA Set 1.00 50852.00 50852.00

Block Panels - 1 & 2 (Admin Block)






A. INCOMING:

426.01 a) 400A, 4P MCCB (36KA) microprocessor based released (O/C, S/C & E/F protection) & Rotery operating mechanism - 1 No. .

B. INSTRUMENTS

426.02 i) 1 No. Multifunction Meter with all functions with communication port.426.02 i) 1 No. Multifunction Meter with all functions with communication port.



C. BUS Bar :


D. OUTGOING :

426.06 i) 10Nos. 63A 4P MCB, 10KA


Block Panel - (School of Science) 2Set






A. INCOMING:


B. INSTRUMENTS




C. BUS Bar :


D. OUTGOING :

427.06 i) 10 Nos. 63A 4P MCB, 10KA



S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

Block Panel - (School of Fine Art & School of Proffessional Studies)






A. INCOMING:


B. INSTRUMENTS




C. BUS Bar :


D. OUTGOING :

428.06 i) 8 Nos. 63A 4P MCB, 10KA


Block Panel - (School of Huminities & School of Education) - 2Set And (School of Social Science) - 1No.



x 5 mm thick with 300 A 4 Strip Aluminium busbars i/c cleaning and finishing complete with seven tank process, powder coating of approved shade and colour including controlx 5 mm thick with 300 A 4 Strip Aluminium busbars i/c cleaning and finishing complete with seven tank process, powder coating of approved shade and colour including control



A. INCOMING:


B. INSTRUMENTS




C. BUS Bar :


D. OUTGOING :

429.06 i) 8 Nos. 63A 4P MCB, 10KA


Block Panel - (Central Library) - 1Set






A. INCOMING:


B. INSTRUMENTS





S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

C. BUS Bar :


D. OUTGOING :

430.06 i) 7 Nos. 63A 4P MCB, 10KA


Block Panel - (Girls Hostel) - 2Set






A. INCOMING:


B. INSTRUMENTS




C. BUS Bar :


D. OUTGOING :

431.06 i) 10 Nos. 63A 4P MCB, 10KA431.06 i) 10 Nos. 63A 4P MCB, 10KA


Dining & Canteen Block 1Set






A. INCOMING:


B. INSTRUMENTS




C. BUS Bar :


D. OUTGOING :

432.06 i) 2Nos 125A, 4P MCCB (36KA) microprocessor based released (O/C, S/C & E/F protection).

432.07 ii) 4 Nos. 63A 4P MCB, 10KA

iii) 2 Nos. 40A 4P MCB, 10KA Set 1.00 70900.00 70900.00

V. C. Residence - 1Set






A. INCOMING:


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

433.01 a) Space for 3-Phase Kwh Meter - 1No


B. INSTRUMENTS




C. BUS Bar :


D. OUTGOING :

433.07 i) 4 Nos. 63A 4P MCB, 10KA


Faculty Housing - 1Set






A. INCOMING:

434.01 a) Space for 3-Phase Kwh Meter - 21Nos


B. INSTRUMENTSB. INSTRUMENTS




C. BUS Bar :


D. OUTGOING :

434.07 i) 18 Nos. 63A 4P MCB, 10KA


KWh Meters

435.00 Supplying, installation, testing and commissioning of electronic kWh meter, LCD display with current reversal indication, LED indication proportional to kWh for on-spot calibration,

dust proof body, rugged construction, elegant poycarbonate casing, non affected by external magnetic field energy meters, three phase energy meter works even on neutral

removal etc. complete as required as per spesifications.

435.01 i) 3-Phase, 4 Wire, kWh meter, 10 -63A with Communication Port Set 21.00 4400.00 92400.00

435.02 ii) 3-Phase, 4 Wire, kWh meter, 5-40A with Communication Port Set 10.00 1940.00 19400.00

L.T. BUS DUCT

436.00 Supplying, installation, including suspension, testing and commisioning of following capacity bus trunking with aluminium bus bars in 1.6mm thick sheet steel enclosure in

convenient sections for use on, 3 phase, 4 wire, 415 volts, 50 Hz, A.C. supply including jointing of sections, flexible joints, expansion joints, bends and earthing with 2 runs of

galavanised iron strips, suspenders, angle iron bracket, steel fasteners, connecting to earthing system etc. as required.

436.01 3200 amps (Between Transformer & Main L.T. Panel-1). Metre 20.00 17600.00 352000.00


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

Sub-Head - IV : L.T Cables / Cable Trays

Note: All cable lengths shall be verified as per site conditions before procurements.

437.00 Supply, laying, testing and commissioning of the following size aluminium conductor,XLPE insulated,PVC sheathed, PVC extruded armoured, PVC sheathed cable 1100 V grade

power distribution cable in ground including excavation of trench, sand cushioning 80mm alround top, brick top and sides protection covering and refilling the trench & making good

as per specifications complete as required.

437.01 3-1/2 core 300 Sq.mm. XLPE Metre 18435.00 1489.45 27458011.00





437.06 4 core 16 Sq.mm. XLPE Metre 12200.00 310.00 3782000.00


438.00 Supply, laying, testing and commissioning of the following size aluminium conductor,XLPE insulated,PVC sheathed, PVC extruded armoured, PVC sheathed cable 1100 V grade

power distribution cable in existing RCC pipe /shaft/ GI pipe / duct / tray as required.








439.00 Supply, laying, testing and commissioning of the following size Copper conductor, XLPE insulated,PVC sheathed, PVC extruded armoured, PVC sheathed cable 1100 V grade

power distribution cable in existing RCC pipe /shaft/ GI pipe / duct / tray as required.

439.01 1Cx120 Sq.mm. XLPE Metre 250.00 1061.00 265250.00

439.02 1Cx70 Sq.mm. XLPE Metre



440.00 Supply, laying of following sizes of XLPE insulated armoured copper control cable of 1100 V grade on existing cable tray, surface of wall/ceiling with M.S. clamps, complete as

required.

440.01 14C x 1.5 sq.mm XLPE Metre 100.00 297.00 29700.00



441.00 Supply and making end termination of following sizes with brass double compression gland including providing and crimping solderless plugs/ferrules of sizes aluminium

conductor,XLPE insulated,PVC sheathed, PVC extruded armoured, PVC sheathed cable 1100 V grade power distribution cable as required.

441.01 3-1/2 core 300 Sq.mm. XLPE Set 124.00 542.85 67313.00




441.05 4 core 16 Sq.mm. XLPE Set 36.00 138.60 4990.00




.


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

442.00 Supply and making of end termination with brass double compression gland including providing and crimping of copper control cable armoured 1100V grade as required.

442.01 14C x 1.5 sq.mm XLPE Set 10.00 300.00 3000.00

442.02 10C x 1.5 sq.mm XLPE Set 8.00 250.00 2000.00

442.03 5C x 1.5 sq.mm XLPE Set 25.00 150.00 3750.00

443.00 Supply, Installlation, Testing and Commissioning of fabricated MS structure of required size, primer and painted Including channels, angles, flat, nuts, bolts, spring washers,

fastners, cutting of wall/ surface and makeing it as good in condition with whatever material reuired. Kg 1000.00 80.00 80000.00

444.00 Supplying and installing following size of perforated pre-painted M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended

from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.

444.01 100 mm width X 50 mm depth X 1.6 mm thickness Metre 530.00 221.55 117422.00



445.00 Supply and fixing ladder type prefabricated Hot dip G.I. Sheet steel cable tray complete with bend/tee joints, coupling plate and nut bolts washers etc. with side runner

20x100x2.5mm and centre rungs of size 15x30x2.5mm c/c 250mm including fixing of hangers etc. as required.

445.01 300mm Metre 60.00 650.00 39000.00

445.02 600mm Metre 80.00 800.00 64000.00

446.00 Supplying and making cable route marker with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) of size 60 cm X 60 cm at the

bottom and 50 cm X 50 cm at the top with a thickness of 10cm including inscription duly engraved as required. Each 250.00 250.00 62500.00Each 250.00 250.00 62500.00

447.00 Providing, laying and fixing following dia RCC pipe NP 2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including

trenching (75 cm deep) and refilling etc. as required.

447.01 100 mm dia Metre 190.00 250.00 47500.00

447.02 250 mm dia Metre 230.00 382.00 87860.00

447.03 300 mm dia Metre 50.00 473.00 23650.00

448.00 Supply and laying of following sizes of heavy duty PVC pipe underground complete as required.(Upvc)

448.01 75mm Metre 265.00 320.00 84800.00

448.02 100mm Metre 245.00 360.00 88200.00

448.03 160mm Metre 175.00 480.00 84000.00

448.04 200mm Metre 210.00 560.00 117600.00


With common burnt clay FPS (non modular) brick of class designation 7.5. Cum 6.89 4588.00 31611.00

450.00 Supplying,laying and fixing of ( 90mm Outer dia & 76mm Inner dia nominal size. ) double wall corrugated High Density Polyethylene Pipe having corrugation on the outer wall, plain

surface on inner wall confirming to IS-14930 Part-II amended upto date i/c fittings & accessories complete etc. in ground depth upto 75 cm. including excavation of trench and

refilling etc complete as required. Metre 890.00 200.00 178000.00

SUB-HEAD - V : Fans & Light Fixtures

451.00 Supply, installation, testing and commissioning of ceiling recessed circular downlight. The latest LED technology and reliable heat management to deliver a long lasting efficient

solution for offices and retails spaces. The power consumtion of fixture 10W producing a lumen output of 1000 lumen. The fixture is designed for aprox 50,000 hrs of operational

life. The cosntruction of fixture is Pressure Die cast Aluminim heat sink and high efficiency Polycarbonate diffuser. Complete with all accessorie including driver etc. Similar to

Philips CAT No : DN192B LED9S-6500PSU WH Each 650.00 1658.00 1077700.00


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

452.00 Supply, installation, testing and commissioning of ceiling recessed circular downlight. The latest LED technology and reliable heat management to deliver a long lasting efficient

solution for offices and retails spaces. The power consumtion of fixture 15W producing a lumen output of 1000 lumen. The fixture is designed for aprox 50,000 hrs of operational

life. The cosntruction of fixture is Pressure Die cast Aluminim heat sink and high efficiency Polycarbonate diffuser. Complete with all accessorie including driver etc. Similar to

Philips CAT No : DN194B LED15S-6500PSU WH Each 1888.00 2525.00 4767200.00

453.00 Supply, installation, testing and commissioning of Emergency Exit signage in sheet steel housing, white powder coated, non-maintained luminaries suitable for 3W LED lamp,

230V 50 Hz AC supply, wall / ceiling / suspension type single / double sided display,EXIT sign illumination should be GREEN. Environment friendly nickle metal hydried battery with

3-hour battery back-up including all accessories including lamps complete as required. Similar to Crompton CAT No : LSSR5 Each 102.00 13187.00 1345074.00

454.00 Supply, installation, testing and commissioning of 15W, 1000Lumen, Surface mounted Green LED downlighter, the power consumption of fixture is 15W and producing a luemn

output of 1000 lumen. The fixture has Mid Power LED’s integrated with an efficient optical system to provide high DLOR. Construction of fixture is High Efficiency White Reflector

along with High Transitive in Diffuser and Die- Cast Aluminum Heat Sink. Separate Driver compartment and with detachable gear tray for the surface mounting. LED Driver is

compliant with the relevant IEC Standards. with Constant Current Driver having <10% THD and CRI>70 complete with all accessories including lamps as required similar to Philips

CAT No.: DN170C LED10S-6500PSU WH. Each 908.00 2357.00 2140156.00

455.00 Supply, installation, testing and commissioning of LED Bulkhead suitable for surface mounted, reliable LED with fits seamlessly, impact resistant front diffuser makes it a very

robust solution with IK09. Complies to IP 66 protection rating which ensures protection against dust and water. Completely pre-wired and with electrical cable. 50,000* burning

hours at L70. UV stabilized polycarbonate cover makes it suitable for indoor and outdoor applications. The power consumption of fixture is 10W producing 600 lumens and with

integral driver with PF >0.9, THD < 20%. Construction of the fixture is High pressure die cast aluminum with Poly carbonate front diffuser. Complete with all accessories including

lamps similar to Philips CAT No: WT202W LED6S CW PSU S1 PC. Each 78.00 1513.00 118014.00

456.00 Supply, installation, testing and commissioning of 2'x2' LED Full Glow light fixture is suitbale for ceiling recessed applications. The fixture has a power consumption of 38W and456.00 Supply, installation, testing and commissioning of 2'x2' LED Full Glow light fixture is suitbale for ceiling recessed applications. The fixture has a power consumption of 38W and

producing a system lumen output of 3500 lumen. The fixture is designed for 40, 000 hrs of operational life, i.e. the lumen output of fixture reduces to 70% of its original output after

40,000 hrs. The fixture is designed with unique aesthetic appeal maing. Construction of fixture is Housing made of Metallic CRCA powder coated body and Diffuser is a high

efficiency Lumio Diffuser and inbuilt electronic control gear having a PF > 0.9, and THD <10%. The fixture is IEC compliant and with UGR < 19. Luminous efficieny 90lm/ W, CRI>

80. The fixture has an operating voltage range 220-240V AC 50 Hz and with including lamps Complete with all accessories as per specification. Similar to Philips CAT No:

RC380B LED285-6500 PSU-OD WH. Each 3366.00 4065.00 13682790.00

457.00 Supply, installation, testing and commissioning of 2'x2' LED Clean Room light fixture is suitbale for ceiling recessed applications. The fixture has a power consumption of 38W and

producing a system lumen output of 3300 lumen. The fixture has an operating voltage range 220-240V AC 50 Hz and with including lamps Complete with all accessories as per

specification. Similar to Philips CAT No: CR652B LED33S-6500 WH. Each 12.00 7585.00 91020.00

458.00 Supply, installation, testing and commissioning of surface mount LED batten with Compact dimensions of 44mm heigh and 25 mm width. The fixture is capable of Inter-

Connectablity with END - To - End Electrical connection. The fixture is IP20 and follows IEC60598. The power consumption of fixture is 15W in 2' length, 40, 000 hrs of operational

life at L70 and luminous efficay 80lm/ W. The construction of the fixture is extruded aluminum housing, and extruded polycarbonate diffuser, with Back plate : Powder Coated

CRCA and End To End Electrical Contact ( LILO) Complete with all accessories including lamps similar to Philips CAT No: BN150W LED13S-6500 PSE OD GR.Each 712.00 1905.00 1356360.00

459.00 Supply, installation, testing and commissioning of surface mount LED batten with Compact dimensions of 44mm heigh and 25 mm width. The fixture is capable of Inter-

Connectablity with END - To - End Electrical connection. The fixture is IP20 and follows IEC60598. The power consumption of fixture is 20W in 4' length, 40, 000 hrs of operational

life at L70 and luminous efficay 80lm/ W. The construction of the fixture is extruded aluminum housing, and extruded polycarbonate diffuser, with Back plate : Powder Coated

CRCA and End To End Electrical Contact ( LILO) Complete with all accessories including lamps similar to Philips CAT No: BN150W LED20S-6500 PSE OD GR.

Each 456.00 2524.00 1150944.00

460.00 Supply, installation, testing and commissioning of EnduraLED batten surface mounting light fixture with power consumption of 40W producing lumen output of 4000 lumen output,

constructed with CRCA housing, PC glossy diffuser and having an integral driver with THD < 00% and PF > 0.9. excellent Efficiency of 105lm/W and 40, 000 hrs of life at L70

.Complete with all accessories including lamps similar to Philips CAT No : ENDURA LED -BN108C LED 40S PSU NW WH. Each 109.00 2876.00 313484.00

461.00 Supply, installation, testing and commissioning of EnduraLED batten surface mounting light fixture with power consumption of 20W producing lumen output of 4000 lumen output,

constructed with CRCA housing, PC glossy diffuser and having an integral driver with THD < 00% and PF > 0.9. excellent Efficiency of 105lm/W and 40, 000 hrs of life at L70

.Complete with all accessories including lamps similar to Philips CAT No : ENDURA LED -BN108C LED 20S PSU NW WH. Each 198.00 1776.00 351648.00


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

462.00 Supply, installation, testing and commissioning of Greenbay(mediumbay) 70W LED light fixture, housing made of High Pressure Die Cast AL, IP 65, Installation with surface or

recess/suspended, 7200 Lumen output, 100 lm/W of system efficacy, SK/AK/SY60/SY110 optics, color temperature of 5700K, CRI>70, IP 65, THD ≤20%, power factor(P.F)=0.9,

50000 hrs of operational life at L70 and with including lamps complete as required similar to PHILIPS Cat No- BY400V LED 72S CW SY60 S2 FG.Each 207.00 11980.00 2479860.00



50000 hrs of operational life at L70 and with including lamps complete as required similar to PHILIPS Cat No- BY400V LED 145S CW SY110 S2 FG.Each 36.00 14620.00 526320.00



50000 hrs of operational life at L70 and with including lamps complete as required similar to PHILIPS Cat No- BY400V LED 145S CW AK PSD S2 FG.Each 24.00 14620.00 350880.00



50000 hrs of operational life at L70 and with including lamps complete as required similar to PHILIPS Cat No- BY415P LED 145S CW WB FG PSU.Each 5.00 15940.00 79700.00

466.00 Supply, installation, testing and commissioning of 4W LED Step light, IP 67, Polycarbonate diffuser Optics etc. Complete with all accessories including suitable recessed mounting

box similar to Philips CAT No: BWG 150 Each 60.00 6200.00 372000.00

467.00 Supply, installation, testing and commissioning of Suspendant type (centerpiece), CFL luminaire with ballast, Crystal Ornamentation, metal & fabric housing, including 8x12W

Tornado Lamp, E14 Lamp base etc. complete as required. Make PHILIPS Cat. Ref. No. 36681/31 Each 17.00 29540.00 502180.00

468.00 Supply, installation, testing and commissioning of 400 mm sweep, 55W, 1350RPM, Air Delivery 72 M3/min., Wall mounted fan complete with double ball bearings, Aerodynamically

designed heavy duty PP blades, etc. complete as required, Make of Havells Cat. Ref. No. Platina Wall Fan, Equivalent Model of Crompton Greaves/Usha/Orient.

Each 47.00 1989.00 93483.00

469.00 Supply, installation, testing and commissioning of folowing sizes, Energy Saving ceiling fan complete with double ball bearings, blades, down rod, shackle insulator, canopy etc.

complete as required, Havells Cat. Ref. No. Velocity (Crompton Greaves/Usha/Orient)

469.01 1400mm sweep, 80W, 300rpm & 270 CMM Air Delivery Each 71.00 2016.00 143136.00



470.00 Supply, installation, testing and commissioning of heavy duty, 230Volts, single phase, 50Hz, 300mm dia exhaust fan WITH 900 RPM double ball bearing,complete with

enegyefficent motor, louvers, bird screen and with 3 core flexible wire complete as required, (Havells cat. ref. no. TURBO-FORCE/Crompton Greaves//Usha/Orient).

470.01 305 mm 900 RPM (Single Phase) Each 135.00 2863.00 386505.00



471.00 Supply, installation, testing and commissioningof electronic ultraviolet type mosquito arrestor, 1X20w luminaire complete with sheet steel enclosure with guard tubular type including

connection complete as required. Each 5.00 3897.00 19485.00

472.00 Supply, installation, testing and commissioning of Stand - alone Lighting Control Sensor, including mounting box etc complete as required. Make PHILIPS Cat. Ref. No.

OccuSwitch Each 293.00 3686.00 1079998.00

473.00 Supply, installation, testing and commissioning of S. Steel wall mounted electric, Sleek hand drier (2500RPM, 2000W) consisting of strip heater double centrifugal high speed

blower rated for continuous use in summer and winter including 3 core flexible wire etc. complete as required. Make of Euronics Cat. No.EH 07S, equivalent Model of

Jaquar/Kopal. Each 179.00 9491.00 1698889.00


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

SUB HEAD - VI : LIGHTNING PROTECTION

474.00 Supply, installation,testing & commissioning of PROTECH TSE - 60 ( Part no.- MD-6-TSE60 ) or equivalent with 6 mts height External Lightning Wide Area Protection System

TerraStreamer with Level-I radius of protection up to 70 Meters based on pro-active early Streamer Emission (ESE) Electronic circuit based Technology. Device shall emit

electromagnetic impulse in the form of a streamer into the air micro-seconds earlier than naturally formed streamers. Device confirming to NFC17-102 & UNE 21186 standards.

Appropriate mounting arrangement ( Part no.- MD-5- SSM6). The device shall be mounted at least 2 meter clear to the highest point on the roof top. Set 8.00 55000.00 440000.00

Down Conductor

475.00 Supply, Installation, Testing & Commissioning of 70 sq.mm twisted (Part no.:- MG -5-0070) 19-strand, bare Copper cable including all accessories complete as required. Meter 160.00 500.00 80000.00

Maintenance Free Earthing

476.00 Supply, Installation, Testing & Commissioning of Maintenance Free Electrolytic Earthing System with 10 feet rod, 2 inches dia, 2mm thick that does not require manual addition of

water. The system should be stable operation for at least 30 years. The electrode shall be electrolytic grade Copper tube pre-filled with hygroscopic powder and low resistive

backfill material also support with TF-50(Low resistive back fill material).The electrode shall be surrounded by suitable powdered form of backfill so as to provide maximum contact

between the electrode and the backfill. The earthing pit shall be provided with suitable sturdy Test Well for observation as per site requirement.(The installation procedures should

be followed as instructed by the Earth Electrode Supplier). Set 15.00 10000.00 150000.00

Sub-head - VII : External Lighting

477.00 Supplying and fixing in position swaged type welded steel tubular pole 11mt long single arch curved of section 165.1 x 5.40, 139.7 x 4.50, 114.3 x 3.65 in dia complying with IS-

2713-80 with latest amendment IS-410 SP-54 with 450x450x6mm thick MS base plate and complete with pole cap and bracket for mounting steel light fixture including one coat of2713-80 with latest amendment IS-410 SP-54 with 450x450x6mm thick MS base plate and complete with pole cap and bracket for mounting steel light fixture including one coat of

red oxide and two coat of approved shade of enamel paint as per drawing and specifications. including providing and fixing of 3x2.5 sq.mm FRLS, copper conductor wire between

junction box to light fixture of each etc complete as required. The pole to be erected with cement concrete foundation of 1:2:4 with coping including excavation in all type of soil as

required.No. 8.00 10800.00 86400.00

478.00 Supplying and erection in position 6 M long (measured above base plate) pole fabricated with 100mm dia 'B' class G.I. pipe with 300x300x6mm plate. The pole have single Side

light fixture including supplying and erection of cement concrete foundation 1:2:4 ( one cement:, 2 coarse sand: 4 stone aggregate 20mm nominal gauge with pedestal of approved

design/drawing. including providing and fixing of 3x2.5 sq.mm FRLS, copper conductor wire between junction box to light fixture of each etc complete as required. The dimension of

foundation shall be 450x450x600mm laid over 100mm thick 600x600mm bed of 1:4:8 concrete with 50mm reducer at top complete as required. No. 67.00 7000.00 469000.00

479.00 Supplying and erection in position 6 M long (measured above base plate) pole fabricated with 100mm dia 'B' class G.I. pipe with 300x300x6mm plate. The pole have double Side

light fixture including supplying and erection of cement concrete foundation 1:2:4 ( one cement:, 2 coarse sand: 4 stone aggregate 20mm nominal gauge with pedestal of approved


foundation shall be 450x450x600mm laid over 100mm thick 600x600mm bed of 1:4:8 concrete with 50mm reducer at top complete as required.No. 18.00 7000.00 126000.00

480.00 Supplying and erection in position 4 M long (measured above base plate/pole fabricated with 100mm dia 'B' class G.I. pipe with 300x300x6mm plate. The pole have fixture

including supplying and erection of cement concrete foundation 1:2:4 ( one cement:, 2 coarse sand: 4 stone aggregate 20mm nominal gauge with pedestal of approved


foundation shall be 450x450x600mm laid over 100mm thick 600x600mm bed of 1:4:8 concrete with 50mm reducer at top complete as required.No. 43.00 5000.00 215000.00

481.00 Supplying, fixing and commissioning of led street light in high pressure die cast LM6 Aluminum housing for effective thermal management, sturdiness and better aesthetics.

Luminaire should be dedicated street light optics for good uniform lighting. UV stabilized Polycarbonate cover. A full length heat resistant Silicon gasket along the perimeter of

housing for High ingress protection of IP 65 for complete luminaire. Class I luminiare.CRI=75 and CCT equals to cool white. Operating voltage of 220v-240v AC 50Hz. Suitable for

Side entry with pole diameter 48-60mm dia the luminaire has built in replaceable driver. Modular arrangement ensure freedom. System watage of 90w with including lamps for

similar to Philips CAT Ref BRP410 LED CW 066 NR PC S1. Each 103.00 12872.00 1325816.00


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

482.00 Supplying, fixing and commissioning of 42 watt LED post top Luminaire of die cast aluminum alloy with PC diffuser board. system power of 42W CRI >80, CCT 4000k IP65

resistance to heat and fire GWT=850 deg C for plastic parts with L70 lumen maintenance and lifetime of minimum 50000 burning hrs. Operating temperature -20 deg C to 35 deg

C. non dimmable integrated driver 220-240V/50-60hz with push in connector. CE and ROHS compliance.post top mounting with axial entry dia 60mm complete as required

including lamps. Similar to Philips cat. ref no. BDP001. Each 43.00 27920.00 1200560.00

483.00 Supplying, fixing and commissioning of LED bollard of extruded aluminium with PC diffuser tube and board integral base plate with PG gland. System power of 8W CRI>75, CCT

4000K IP65 IK10 resistance to heat and fire GWT=850 deg C for plastic parts with L70 lumen maintenace and lifetime of minimu 25000 burning Hrs. operating temperature -20 deg

C to 40 deg C. Non dimmable integrated driver 220-240V/50-60HZ wit push in connector. CE and ROHS compliance complete as required including lamps similar to Philips Cat Ref

BCP151 LED150/NW PSU 220- 240V 7043 Each 131.00 10500.00 1375500.00

484.00 Supplying, fixing and commissioning of Under water luminaire suitable for featuring a stunning, sleek Italian design with a stylish chrome finish. Available in Micro, Mini and

Compact sizes, the range offers a choice of dynamic white-light and colored-light versions including integral control gear, wiring & junction box etc., complete as required including

lamps, similar to Philips Cat No. BBD410 Each 4.00 70000.00 280000.00

485.00 Supplying, fixing and commissioning of 15W, Ground burial (UP lighter) luminiaire including integral control gear, wiring & junction box etc., complete as required including lamps,

Protection Level-IP-67, IK-10 similar to Philips Cat No. BBP330 Each 200.00 12000.00 2400000.00

486.00 Supply, installation, testing and commissioning of 4W LED Step light, IP 67, Polycarbonate diffuser Optics etc. Complete with all accessories including suitable recessed mounting

box similar to Philips CAT No: BWG 150Each 53.00 6360.00 337080.00

Façade LightingFaçade Lighting

487.00 Supply, Erection, Testing & Commissioning of direct view linear LED lighting fixture designed for dynamic lighting effects. it ideal for exterior accent and contour lighting

applications, 1200mm length including mounting bracket, Front-serviceable surface mount brackets, 180° viewing angle, life time 50,000 hrs, CRI>80, Translucent Cover Lens,

houshing of UV-stabilized polycarbonate, dark grey finish (RAL7043), Combined power & data input and output connectors, Power Consumption of 12Watt, IP66, Wet location

listed, IK10, as well as low-resolution graphics with a resolution of up to 150mm (6in) per pixel. Up to 24m (80ft) of fixtures can be connected per Control Module. Ethernet and

DMX-512 control, including all complete as required, 3 years warranty, similar to Philips cat no.- VAYA TUBE, 4000K, ETHERNET & DMX, 1.2M (4FT) 150MM (6IN) PITCH, UL,

CE, CQC Each 150.00 22640.00 3396000.00

488.00 Supply, Erection, Testing & Commissioning of JUMPER CABLE, 1.5M (5FT), UL, CE, CQC, including all complete as required Each 150.00 5054.00 758100.00

489.00 Supply, Erection, Testing & Commissioning of LEADER CABLE, 15M (50FT), UL, CE, CQC, including all complete as required Each 5.00 16900.00 84500.00

490.00 Supply, Erection, Testing & Commissioning of CONTROL MODULE, ETHERNET & DMX, 24V, IP66, 2-PORT, including all complete as required Each 1.00 27500.00 27500.00

491.00 Supply, Erection, Testing & Commissioning of Linear LP White LED lighting fixture designed for static white or mono colored lighting effects and low level grazing applications

withelliptical 28°x84° optics. Input & Output connectors make installations fast, easy and reliable. 1200mm length including mounting hinge, adjustable mounting and tilting surface-

mount bracket, life time 50,000 hrs, 1200 lumens, CRI>80, houshing of Extruded aluminum, anodized finish RAL7043, Power input and output connectors, Tempered Glass Lens,

power comsumption of 20Watt, IP66, Wet location listed, IK07, CE, CB,including all complete as required, 3 years warranty, similar to Philips cat no.- VAYA LINEAR LP 4000K

28 x 84 DEGREE 1.2m (4ft) CE Each 10.00 40716.00 407160.00

492.00 Supply, Erection, Testing & Commissioning of LINEAR LP-MP WHITE JUMPER CABLE, 1.5M (5FT), CE, including all complete as required Each 10.00 3276.00 32760.00

493.00 Supply, Erection, Testing & Commissioning of exterior LED spotligh, high-quality white light in a warm 2700 K, life time 50,000 hrs, 1004 lumens, CRI>80, 274 x 204 x 175 mm

(Height x Width x Depth), houshing of Die-cast aluminium, powder-coated finish, Tempered glass lens, 1.8 m (6 ft) unified power/data cable with flying leads for fixture connections,

power consumption of 30watt, UL/cUL, FCC Class A, CE, C-Tick, CQC, SAA, Dry/Damp/Wet Location, IP66, including all complete as required, 3 years warranty, similar to

Philips cat no.- eW Burst Powercore 2700 K, 23° Spread Lens, Gray Housing, CE, ArchitecturalEach 11.00 78741.00 866151.00


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

494.00 Supply, Erection, Testing & Commissioning of LED lighting fixture providing a high-intensity wash of white light. Rated for outdoor use, rugged die-cast aluminum housing,Clear

tempered glass lens, 2700K, life time 50,000hrs, 10° beam angle, 1990 lumens, CRI>80, 180 x 318 x 124 mm (Height x Width x Depth), 1.8 m (6 ft) unified power/data cable for

fixture connections, power consumption of 50watt, UL/cUL, FCC Class B, Dry/Damp/Wet Location, IP66, including all complete as required, 3 years warranty, similar to Philips cat

no.- EW BLAST POWERCORE, 2700K, CLEAR LENS, BLACK HOUSING, CEEach 16.00 119808.00 1916928.00

495.00 Supply, Erection, Testing & Commissioning of high-performance LED fixtures are premium exterior long-throw dynamic high-quality white luminaires, warm 2700 K . full range of

accessories allow for customizable beam angles for floodlighting, spotlighting, wall washing, and grazing, rugged die-cast aluminium housing, life time 50,000 hrs, 23° beam angle,

6446 lumens, CRI>80, 350 x 733 x 211 mm (Height x Width x Depth), Tempered glass lens, Integral male/female waterproof connectors for fixture connections, power

consumption of 125watt, UL/cUL, CE, FCC Class A, PSE, Dry/Damp/Wet Location, IP66 , including all complete as required, 3 years warranty, similar to Philips cat no.- eW

Reach Compact Powercore Each 2.00 446472.00 892944.00

496.00 Supply, Erection, Testing & Commissioning of UPGRADE, LEADER CABLE, 10FT, CE/CCC, including all complete as required Each 2.00 12987.00 25974.00

497.00 Supplying and fixing of 40mm dia GI pipe class B on the pole for cable entry to junction box as required,. Meter 116.00 300.00 34800.00

498.00 Supply & Laying of3.5Cx35 sq.mm size of aluminium conductor, XLPE insulated, PVC sheathed, PVC extruded, armoured PVC sheathed cable 1100V grade in existing hume & GI

pipe / duct / surface / tray etc., complete as required. Meter 300.00 143.00 42900.00

499.00 Supply & Laying of 4Cx16 sq.mm size of aluminium conductor, XLPE insulated, PVC sheathed, PVC extruded, armoured PVC sheathed cable 1100V grade in existing hume & GI


500.00 Supply & Laying of 4Cx6 sq.mm size of aluminium conductor, XLPE insulated, PVC sheathed, PVC extruded, armoured PVC sheathed cable 1100V grade in existing hume & GI500.00 Supply & Laying of 4Cx6 sq.mm size of aluminium conductor, XLPE insulated, PVC sheathed, PVC extruded, armoured PVC sheathed cable 1100V grade in existing hume & GI


501.00 Supply & Laying of 4Cx4 sq.mm size of aluminium conductor, XLPE insulated, PVC sheathed, PVC extruded, armoured PVC sheathed cable 1100V grade in existing hume & GI

pipe / duct / surface / tray etc., complete as required. Meter 69.00

502.00 Supply & Laying of 4Cx25 sq.mm size of aluminium conductor, XLPE insulated, PVC sheathed, PVC extruded, armoured PVC sheathed cable 1100V grade in ground including

excavation of trench, sand cushioning 80mm allround top, brick top and sides protection covering and refilling the trench and making good, complete as required.Meter 50.00 143.00 7150.00






excavation of trench, sand cushioning 80mm allround top, brick top and sides protection covering and refilling the trench and making good, complete as required.Meter 69.00

506.00 Supplying and embedding 80mm dia GI pipe "B" class 500mm long in the gate pillar including painting as required. Each 6.00 278.00 1668.00

507.00 Supplying and drawing of 2x4+1x2.5 sq.mm FRLS PVC insulated PVC sheathed copper wire in pipes/poles. Meter

508.00 Supplying and laying of following sizes of PVC pipe (heavy duty) laid under floor including cutting and making good the same complete as required as per technical specification.

50mm dia pipe Meter 150.00 240.00 36000.00

509.00 Supplying and making end termination with brass double compression gland including providing and crimping of copper solderless lugs/ferrules for FRLS armoured/unarmoured

power copper conductor cables 1.1 KV grade of following sizes.


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

509.01 4x25 sq.mm Set 30.00 300.00 9000.00

509.02 4x16 sq.mm Set 80.00 250.00 20000.00

509.03 4x6 sq.mm Set 100.00 200.00 20000.00

509.04 4x4 sq. mm Set

510.00 Supplying and fixing of polyester (SMC) 217x115x253 mm street lighting junction box with hinged cover of approved design complete with 8 way 63A elmex connector with din rail

mounting plate, assembly kit for looking the cables and connection of luminaire, one no. 6A SP MCB (10 KA) including painting and connecting the cable etc. as required as per

HENSEL or as approved. Each 116.00 2000.00 232000.00

511.00 Supplying, fixing, testing and commissioning of 3 pin 230V 4nos. 16 Amp socket outlet with controlled by MCB outdoor type enclosure with suitable angle iron frame etc.complete

as required.(Near Car Parking for Car battery charging) Each 5.00 3000.00 15000.00

512.00 Supplying and drawing of 3x2.5 sq.mm FRLS PVC insulated PVC sheathed copper wire in pipes/poles. Meter 1000.00 75.00 75000.00

513.00 Supply, erection, testing and commissioning of feeder pillar-1 (having 35KA fault capacity) fabricated with 2mm thick CRCA sheet steel overall covered with double door, modular,

IP-55 weather proof powder coated paint of approved make complete with RCC foundation of 600mm hight from finished ground level, providing and fixing following mountings as

per specifications complete as required.

A)INCOMING - 1

513.01 i) 1No. 100 A 4P MCCB (35KA) with M.R releases

513.02 ii) 1 Set of indicating lamps. With 2A control MCB

513.03 iii) 1 set Multifunction meter with all function with communication port RS-485 compatible with PLC / PC / BMS with set of CTs.513.03 iii) 1 set Multifunction meter with all function with communication port RS-485 compatible with PLC / PC / BMS with set of CTs.

b)INCOMING - 2

513.04 1 No. 32A, DP MCB

513.05 3 No. 63A, DP MCB

513.06 4 Nos. astronomical timer switch with NO and NC contact setting, selector switch & communication port

513.07 4 Nos.110 A TP motor duty contactor with NO-NC contact and 230 V A.C coil.

513.08 4 set of push buttons.

513.09 4 Set of indicating lights.

513.10 1set - 1KVA, 240/24V AC duty type, step down dry type transformer With 1No. 125A DP MCB

c)Busbars

513.11 i) 300A TPN Aluminium bus bars.

513.12 ii) 200A SPN -4set (for R, Y, B) Aluminium bus bars.

d)OUTGOING

513.13 63 A, 4P MCB - 2 Nos.

513.14 32 A, 4P MCB - 2 Nos.

513.15 16-32 A, SP MCB - 24 Nos.

513.16 16-20 A, DP MCB - 6 Nos. Nos 1.00 282890.00 282890.00

514.00 Supply, erection, testing and commissioning of feeder pillar-2 (having 36KA fault capacity) fabricated with 2mm thick CRCA sheet steel overall covered with double door, modular,

IP-55 weather proof powder coated paint of approved make complete with RCC foundation of 600mm hight from finished ground level ,providing and fixing following mountings as

per specifications complete as required.

a)INCOMING - 1

514.01 i) 1No. 100 A 4P MCCB (35KA) with M.R releases

514.02 ii) 1 Set of indicating lamps. With 2A control MCB

514.03 iii) 1 set Multifunction meter with all function with communication port RS-485 compatible with PLC / PC / BMS with set of CTs.


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

b)INCOMING - 2

514.04 3 No. 63A, DP MCB

514.05 3 Nos. astronomical timer switch with NO and NC contact setting, selector switch & communication port

514.06 3 Nos.110 A TP motor duty contactor with NO-NC contact and 230 V A.C coil.

514.07 3 set of push buttons.

514.08 3 Set of indicating lights.

C)Busbars

514.09 i) 300A TPN Aluminium bus bars.

514.10 ii) 200A SPN -3set (for R, Y, B) Aluminium bus bars.

d)OUTGOING

514.11 32 A, 4P MCB - 2 Nos.

514.12 16-32 A, SP MCB - 24 Nos. Nos 1.00 165516.00 165516.00

EARTHING

515.00 Earthing with G.I. earth plate 600x600x6mm including accessories and providing masonary enclosure with cover plate having locking arrangement with watering pipe complete with

charcoal and salt etc. as per IS:3043 complete as required. Set 4.00 6000.00 24000.00

516.00 Providing and laying G.I. strip 25x6mm in recess/surface for connection etc. complete as required. Metre 30.00 150.00 4500.00

517.00 Earthing of GI earth pipe 4.5m long 40mm dia GI pipe 'B' class including excavation in soil as per site, accessories and providing masonary enclosures with C.I. Cover with locking

arrangement on top with charcoal and salt etc. as per IS:3043 complete as required. Set 16.00 2500.00 40000.00arrangement on top with charcoal and salt etc. as per IS:3043 complete as required. Set 16.00 2500.00 40000.00

518.00 Providing and laying 8 SWG G.I. wire in recess/surface for connection etc. complete as required. Metre 3500.00 9.45 33075.00

519.00 Supply and laying of under noted sizes of hume pipe NP-2 grade under the road including 1:3:6 cement concrete bed at 750-1200 mm depth cutting and making good the same as

required as per techinical specifications.

519.01 150mm Metre 400.00 300.00 120000.00

519.02 100mm Metre 100.00 250.00 25000.00

Sub-Head - VIII : D.P. Structure, H.T. Panel Board, Battery Charger & HT Metering Panel

520.00 Supply, erection, testing and commissioning of H Pole (double pole) structure in position 13M long MS pole (Swaged type) as per IS-410 SP-70 with latest amendment and

necessary anti climbing devices, cross arms, bracing, clamps and painting with one coat of primer and two coats of aluminium paint including circuit marking etc. as required. The

poles to be erected in cement concrete foundation of 1:2:4 with collar including excavation in soil (600mm(L) x 600mm(W) x 1800mm(D)) and making good complete as required.

Set 1.00 99000.00 99000.00

521.00 Supply, erection, testing and commissioning of Supplying and erection of galvanised stay set for 33 KV over-head lines complete with 19/ 20 mm dia X 1.8 metres long stay rod,

anchor plate of size 45 cm X 45 cm X 7.5 mm thick, thimble, stay clamps, turn buckle ( 20 mm X 600 mm ), 7/ 4.00 mm dia G.I. stay wire and 33 KV strain insulator etc in cement

concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation (600mm(L) x 1200mm(W) x 1200mm(D)) and re-filling

etc. as required. Set 4.00 3531.00 14124.00

522.00 Supply, erection, testing and commissioning of 33 KV disc insulator for 33 KV over-head lines with galvanised insulator fittings, ball and socket type and complete with galvanised

strain clamps, bolts, nuts, washers etc. as required (Set of Three)IS: 731-1963 and 3188-1965 for disc insulator.Set 1.00 3495.00 3495.00

523.00 Supply, erection, testing and commissioning of 33 KV pin insulator (size 100mm x 80mm) complete with large steel head G.I. spindle, nuts, washers etc. as required (Set of

Three).IS: 731-1963 and 1445-1966 for Pin insulator Set 3.00 1000.00 3000.00


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

524.00 Supply, erection, testing and commissioning of 33 KV, 3 phase, 400 Amps central post racking type gang operated switch with earth switch complete with hardware, arcing horns,

arcing contacts, vertical drop out fuses, down rod operating with locking devices, necessary MS channel/angle iron brackets, clamps insulators & connections etc. as required for

earthed system and conforming to IS: 19813. Set 1.00 45000.00 45000.00

525.00 Supply, erection, testing and commissioning of three piece nonlinear resistor type lightning arrestor suitable for 3 wire, 33 KV overhead lines with rated voltage 30 KV (rms) with a

nominal discharge current rating of 10 KA and complete with galvanised clamping arrangement, G.I. bolts, nuts, washers etc. as required. Set 1.00 125000.00 125000.00

526.00 Supply, erection, testing and commissioning of 25x5mm GI earth strip including clamps and binding etc. as required as per specifications and drawings. Mtr. 60.00 129.00 7740.00

527.00 Supplying and laying of the 250mm dia 'B' class GI pipe complete with all accessories as required as per specifications. Mtr. 10.00 1700.00 17000.00

528.00 Supplying and fixing of 1200x1200x6mm Copper plate, vertically earthing complete with 20mm dia GI pipe, a funnel for watering with hinged cover masonry housing alternate layer

of coke and salt atleast 100mm thick all-around etc. complete as required confirming IS-3043Set 4.00 43957.00 175828.00

529.00 Supplying, Fixing Connecting, Testing and Commissioning of 33 kV H.T. metering Panel complete with CT's and PT's complete with connections etc.

529.01 3 Nos. 33 KV single phase PT 100 VA burden accuracy class 0.2 (dry type cast resin)

529.02 3 Nos. 200-110/5A 33 KV cast resin CT's 15 VA burden, accuracy class CL 0.2

529.03 3 Sets of HRC fuses with fuse base (H.T. Fuse - 1A & LT fuse 2-6A).

529.04 Bus link fuses with fuse base.

529.05 2 Nos. indoor cable end box for 1R 3C x 400 sq.mm (33 KV) aluminium conductor XLPE (E) cable (Incoming & Outgoing cable). Set 1.00 190000.00 190000.00

530.00 Supplying, installation, testing & commissioning of indoor type floor mounted metal clad, 33KV VCB panel Board at Gate with 1No. VCBs, totally enclosed & fully interlocked,

horizontal drawout, horizontal/ vertical isolation type breaker as per IS 13118, as amended up to date and additional specifications, having capacities as mentioned below, single

break, trip free mechanism, manually charged and auto/manually closing breaker suitable for use on 33 KV, 3 Phase, 50Hz A.C. supply with short circuit fault level of 1500 MVA,

complete with self contained, fully interlocked, rack in and rack out mechanism, air insulated but encapsulated copper bus bars of 1250 Amps capacity, breaker featured with

mechanical ON/OFF indicator with hand trip device, spring release coil, shunt trip coil and auxiliary switch of 4 NO+4NC and equipped with following switchgears and accessories

in each panel and also compatible to PC/PLC/BMS and breakers, relays & meters with communication port RS-485 as per specifications and schematic drawing and providing &

fixing of M.S. channel in across trenchs etc. i/c all accessorries, connections suitable for 3Cx 400sq. mm. XLPE 33 KV cable (cable entry from bottom) end termination with heat

shrinkable jointing material etc. as required. (Note- Cost of end termination not included in this item)

A.)INCOMER PANEL (Stand-alone) 1 NOS. AND EACH SHALL COMPRISING OF:

530.01 1- Metal clad housing with truck having 800A TP integral VCB with Electric operated mechanism (spring charged motor - 230 VAC).

530.02 1 - Set of air insulated bus bar & chamber

530.03 1 - Set of isolating plug and receptacle.

530.04 1 - Set of Automatic safety shutter.

530.05 1 - Set of breaker control switch (TNC)

530.06 1 - Set of dual core CT's

CT-I

530.07 Core I 135-90/5A class 5P-10 (15 VA)

530.08 Core II 135-90/5A class I (15 VA)

530.08 1 - HT cable joint box for 3C x 400 sq.mm aluminium conductor XLPE (E) cable

530.09 3 - Nos. PT's of 33KV (100 VA) cast resin type.

530.10 1 - No. Tripping coil & closing coil 24V DC/110V A.C.

530.11 1 - Set of ON/OFF/Trip & circuit healthy and phase indicating lights.

530.12 1 - 3 element O/C, EF, SC & Neumerical relay

530.13 1 - No. Voltage phase reversal / Phase sequence voltage relay.

530.14 1 - No. multifunction meter with MDI & communication port (load management & compatible with PLC/PC)


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

530.15 1 - Set Volt meter with selector switch

530.16 1 - No. master trip relay

530.17 1 - No. Spring charging relay

530.18 1 - No. Trip Circuit supervision relay.

530.19 1 - No. Anti pumping relay

530.20 1 - set of Aux. relays. Set 1.00 3220090.00 3220090.00

531.00 Supplying, installation, testing & commissioning of indoor type floor mounted metal clad, 33KV VCB panel Board(Extensible type) with 3Nos. VCBs, totally enclosed & fully

interlocked, horizontal drawout, horizontal/ vertical isolation type breaker as per IS 13118, as amended up to date and additional specifications, having capacities as mentioned

below, single break, trip free mechanism, manually charged and auto/manually closing breaker suitable for use on 33 KV, 3 Phase, 50Hz A.C. supply with short circuit fault level of

1500 MVA, complete with self contained, fully interlocked, rack in and rack out mechanism, air insulated but encapsulated copper bus bars of 1250 Amps capacity, breaker

featured with mechanical ON/OFF indicator with hand trip device, spring release coil, shunt trip coil and auxiliary switch of 4 NO+4NC and equipped with following switchgears and

accessories in each panel and also compatible to PC/PLC/BMS and breakers, relays & meters with communication port RS-485 as per specifications and schematic drawing and

providing & fixing of M.S. channel in across trenchs etc. i/c all accessorries, connections suitable for 3Cx 400sq. mm. XLPE 33 KV cable (cable entry from bottom) end termination

with heat shrinkable jointing material etc. as required. (Note- Cost of end termination not included in this item)

A.)INCOMER PANEL 1 NOS. AND EACH SHALL COMPRISING OF:

531.01 1- Metal clad housing with truck having 800A TP integral VCB with Electric operated mechanism (spring charged motor - 230 VAC).

531.02 1 - Set of air insulated bus bar & chamber

531.03 1 - Set of isolating plug and receptacle.

531.04 1 - Set of Automatic safety shutter.531.04 1 - Set of Automatic safety shutter.



CT-I

531.07 Core I 135-90/5A class 5P-10 (15 VA)

531.08 Core II 135-90/5A class I (15 VA)

531.08 1 - HT cable joint box for 3C x 400 sq.mm aluminium conductor XLPE (E) cable

531.09 3 - Nos. PT's of 33KV (100 VA) cast resin type.

531.10 1 - No. Tripping coil & closing coil 24V DC/110V A.C.

531.11 1 - Set of ON/OFF/Trip & circuit healthy and phase indicating lights.

531.12 1 - 3 element O/C, EF, SC & Neumerical relay

531.13 1 - No. Voltage phase reversal / Phase sequence voltage relay.

531.14 1 - No. multifunction meter with MDI & communication port (load management & compatible with PLC/PC)

531.15 1 - Set Volt meter with selector switch

531.16 1 - No. master trip relay


531.18 1 - No. Trip Circuit supervision relay.


531.20 1 - set of Aux. relays.

B.)BUS - BARS:

531.21 Copper three phase bus-bars rated at 1250A, 1500MVA

D.)OUTGOING PANELS 2 NOS. AND EACH SHALL COMPRISING OF:

531.22 1- Metal clad housing with truck having 800A TP integral VCB Electric operated mechanism (spring charged motor 230 V A.C.)


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

531.23 1 - Set of isolating plug and receptacle

531.24 1 - Set of automatic safety shutters


531.26 1 - Set of air insulated bus bar.


CT- I

531.28 Core I 45/5 class 5 P - 10 (15 VA)

531.29 Core II 45/5 Class I (15 VA)

CT-2

531.30 1 - Shunt trip/closing coil 24V D.C. / 110V A.C.

531.31 1 - HT cable joint box for 3C x 400 Sq.mm XLPE (E) cable

531.32 1 - Over current, S/C, EF & Neumerical relay

531.33 1 - Set restricted earth fault relay with set of CTS of 5P20, 15VA on HT & LT Side of transformer including wiring.

531.34 1 - Set ON/OFF, Trip & ckt healthy indication light.

531.35 3 - 2 elements auxiliary relay for transformer (WTI & ESPB with alarm & trip)

531.36 1 - Set 12 window Annunciation with accessories.

531.37 1 - Master Trip relay.



531.40 1 - Set of terminal block with 20% extra terminal for connection with 2.5sq.mm 4 core copper conductor PVC insulated PVC sheathed copper cable from panel to transformer.531.40 1 - Set of terminal block with 20% extra terminal for connection with 2.5sq.mm 4 core copper conductor PVC insulated PVC sheathed copper cable from panel to transformer.

531.41 1 - Trip circuit supervision relay.

531.42 1 - No. multifunction meter with communication port (load management & compatible with PLC/PC) Set 1.00 4055526.00 4055526.00

532.00 Supply, erection, testing and commissioning of 415V, 3 phase, 4 wire A.C. to 24V DC 200 AH sealed maintenance free batteries with semiconductor/IGBT (fulwave rectifier) with

auto manual/trickle boost facility battery charging units complete including one no. distribution board having 250 Amps DP MCCB as incomer and 24 Nos. 20/16A DP MCB's (D.C.

duty) as outgoings complete as required and as per technical specifications complete as required. Set 1.00 232476.00 232476.00

Sub-Head - IX : Transformer

533.00 Supplying, installation, testing and commissioning of 2000KVA, 33/0.433 KV, 3Phase, 50 Hz, Dyn 11, indoor Dry type type, copper wound transformer with OFF load tap

changing arrangement on HV side +5% to -15% in steps of 2.5%, having cable end boxes on HV side suitable for 3x400sqmm XLPE(E) cable of 33 KV grade and 3200Amp. bus

trunking arrangement on LV side complete with all accessories including S/F of M.S. channel of size 150x50x6mm, first filling of filtered dehydrated oil and confirming to IS 2026

(Part 1 to Part 5), Transformer losses as per ECBC norms & as per specification attached complete in all respects as required at site. Set 2.00 3062000.00 6124000.00


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

Sub-Head - X : H.T. Cables

534.00 Supply, laying, testing and commissioning of 33 KV (E), XLPE cable having compacted circular stranded aluminium conductor, conductor screening of extruded semi conducting

compound, cross linked polyethylene (XLPE), insulation screening of the extruded semi conducting compound followed by copper tape, cores laid up, taped PVC inner sheath,

single layer of steel strip armouring, overall PVC outer sheath conforming to IS:7098 (Part amendments) for following mentioned sizes. It should be at a depth of 1200mm below

ground level over a cushion of 75mm thick sand alround and protected with bricks on sides and top on surface the cable run shall be fixed on M.S. clamps etc of suitable size or as

directed by the E/I complete in all respect. The price are inclusive of all earth work such as digging, back filling, supply and spreading of good earth all around the cable & making

good, supply and providing cable identification markers etc. complete as required.

534.01 3 C x 400 sq.mm Meter 180.00 2108.54 379538.00

535.00 Supply and termination of outdoor type cable end box for terminating 33 KV(E) 3 core 400 sq.mm Aluminum conductor XLPE cable including supply of heat shrinkable jointing kit,

lugs etc. complete as required. Set 1.00 20800.00 20800.00

536.00 Supply and termination of indoor type cable end termination 33KV (E) 3 core x 400sq.mm aluminum conductor XLPE cable on H.T. switchgears/ metering panel/transformers

including supply of heat shrinkable jointing kit, cable lugs etc. complete as required. Set 9.00 16800.00 151200.00

537.00 Supply and laying of following sizes of XLPE insulated PVC sheathed,PVC extroded,steel armoured PVC sheathed copper control cable of 1100 V grade on existing cable tray,

surface of wall/ceiling with M.S. clamps, complete as required.

537.01 2C x 2.50 sq.mm Meter 250.00 110.00 27500.00

537.02 4 C x 2.50 sq.mm Meter 225.00 161.00 36225.00

537.03 10C x 2.50 sq.mm Meter 200.00 308.00 61600.00

537.04 19C x 2.50 sq.mm Meter 150.00 561.00 84150.00537.04 19C x 2.50 sq.mm Meter 150.00 561.00 84150.00

538.00 Supply and making of end termination with brass double compression gland including providing and crimping of copper control cable armoured 1100V grade as required.

538.01 2C x 2.5 Set 16.00 100.00 1600.00

538.02 4C x 2.5 Set 12.00 120.00 1440.00

538.03 10C x 2.50 Set 12.00 150.00 1800.00

538.04 19C x 2.50 Set 10.00 225.00 2250.00

539.00 Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including

trenching (75 cm deep) and refilling etc as required.539.01 150mm dia. Meter 20.00 300.00 6000.00

539.02 250mm dia. Meter 40.00 382.00 15280.00

540.00 Supply and fixing of steel work for cable tray in position including clamps, frame work of flats, angle iron, channel with fabrication work including cutting, bending, welding, drilling

bolting etc. as per design as required. One coat of primer and 2 coats of enamel paint of approved shade shall be provided. Kgs. 2000.00 75.00 150000.00

Sub-Head - XI : D.G. Sets

541.00 Supply, installation, testing and commissioning of silent type D.G. Set of following capacity, 415 Volts rated heat exchanger cooled diesel engine directly coupled to alternator set

mounted on common base frame, return fuel cooler, battery & battery charger, residential type silencer Anti Vibration mounting pads, Engine alternator safeties adopters box

suitable for busducts/cable with accessoires & their wiring upto PLC control panel (within 50 meter), 990 liter day tank, controller will be compactible for remote monitoring and data

logging with digital voltage regulator through inbuilt AVR, digital governing, protective protection, metering complete as required as per drawing and specification as well as PC/PLC

compatible.(jackson/volvo/cetter pillar)

541.01 750 KVA D.G. Set (Silent type) Nos. 4.00 6016478.00 24065912.00

541.02 320 KVA D.G. Set (Silent type) Nos. 1.00 2395602.00 2395602.00


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

Sub-Head - XII : Miscellaneous Items

542.00 Supplying and fixing of non-skid rubber mat 3mm thick and 900mm width as required including cutting to required lengths of approved make with Test Certificates for H.T. 33 / 11

KV panels.(As per latest D.O.E.S. norms) Meter 15.00 1100.00 16500.00

543.00 Supplying and fixing of non-skid rubber mat 3mm thick and 900mm width as required including cutting to required lengths of approved make with Test Certificates for L.T.

panels.(As per latest D.O.E.S. norms) Meter 62.00 900.00 55800.00

544.00 Supply & fixing shock treatment chart written in English and Hindi duly mounted on a wooden frame with 5 mm thick glass as reqd. (approximate front area 1.20 sq. metre) Each 8.00 400.00 3200.00

545.00 Providing of set of 4 Nos. 9.5 Litre capacity GI bucket painted in post office red colour with prior coat of red oxide paint and written with white paint ‘FIRE’ and mounted on MS

angle iron frame with bracket of appropriate size & capacity i/c filling sand etc. conforming to IS: 2546-1974. Each 14.00 1000.00 14000.00

546.00 Supply and fixing safety instruction chart in word duly framed with 5 mm thick glass as required. (approx. front area 1.20 sq. mt.) Each 8.00 400.00 3200.00

547.00 Providing and fixing carbon dioxide (CO2) type fire extinguishers confi rming to IS 2878 : 1976 and cylinders fully charged of following capacity.

547.01 (a) 4.5 KG Each 12.00 4800.00 57600.00

548.00 Providing First Aid Box as approved by St. John Ambulance Brigade/Indian Red Cross conforming to IS 2217 : 1963. Each 4.00 400.00 1600.00

549.00 Providing & fixing danger plates made of mild steel at least 2 mm thick & vitreous enameled white on both sides & with inscriptions in signal red colour on front side as read.

549.01 (a) High Voltage – size 250 mm x 200 mm Each 8.00 89.25 714.00

549.02 (b) Medium Voltage – size 200 mm x 150 mm Each 19.00 57.75 1097.25

Sub Head - XIII : Solar System

550.00 Supply, Installation, Testing and Commissioning at site including associated civil works where-ever applicable for generating solar PV of 70 kWp (2 x 35 kWp) with the following

items complete as required:

2 x 35 kWp (Different locations) Grid Connected Solar Power Plant.

550.01 Solar PV Modules with frame of 24V/250 Wp (minimum), polycristaline type with min 16% efficiency. Nos. 600.00 20000.00 12000000.00

550.02 Solar PV Modules mounting structure as required. set 4.00 350500.00 1402000.00

550.03 Array Junction Box Nos. 36.00 2500.00 90000.00

550.04 Main Junction Box No. 4.00 10800.00 43200.00

550.05 Gird Interactive Inverter 35kW / 35KVA, 415V No. 4.00 891568.00 3566272.00

550.06 DC Distribution Board No. 4.00 15000.00 60000.00

550.07 AC Distribution Board No. 4.00 20000.00 80000.00

550.08 Cabling from Battery Bank to Solar PV Cells

550.09 1C x 4 sq.mm PVC Cu cable mtr 1200.00 37.80 45360.00


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.



550.12 4 C x 16 sq.mm PVC Cu cable mtr 200.00 641.00 128200.00

550.13 Installation Kit set 4.00 50000.00 200000.00

550.14 Earthing Kit set 4.00 21800.00 87200.00

550.15 Lightning and Overvoltage protection set 4.00 17160.00 68640.00

550.16 Spares for 5 years warranty set 4.00 100000.00 400000.00

551.00 SOLAR PANEL

A. INCOMER

551.01 100 A 4P Automatic Change Over Switch as incomer - 1 No.

551.02 100 A 4P MCCB (35 KA) as incomer - 1 No.

551.03 3 Nos. Time switch programmeable type (0-24) hour with 3 NO and 3 NC contact setting

551.04 3 Nos. DP motor duty contactor with NO-NC contact and 230 V A.C. coil

551.05 2 Set of indicating lights551.05 2 Set of indicating lights

551.06 B. INSTRUMENTS

551.07 i) 1 No. Voltmeter (0-500V) with selector switch and control fuses

551.08 ii) 3 Nos. CT's 100A/5A accuracy Class-I,15 VA

551.09 iii) 1 No. Ammeter with ASS

551.10 iv) Phase indication lights

C. OUTGOING:

551.11 100/32 Amp TPN MCCB 35 KA - 2 Nos

551.12 1 Set Phase indication light LED type with protection fuse Set 4.00 141440.00 565760.00

Sub Head - XIV : Machine Room Less Passengers Lifts

552.00 Supplying, Installation, testing & commissioning of 8 passengers lifts with Machine Room Less (544 Kg.) having contract speed of 1.0 MPS serving different floors in the existing

lift shaft as per detailed specifications enclosed and as under :-(OTIS/Schindled/A one)

552.01 Speed - 1.0 MPS

552.02 Floors - Ground floor to 3rd floor = 4

552.03 Travel - 9.9 Metres (approx.)

552.04 Stop & opening - 4 (Three) on same side

552.05 Controller: AC variable voltage & variable freqency.

552.06 Automatic rescue device complete with dry maintenance free batteries as required.

552.07 Operation: Microprocessor based automatic Simplex selective fully collective with / without attendant.

552.08 Power - 415 V, 3 phase, 50 Hz, 4 wires system


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

CAR & CAR DOOR DETAILS

552.09 Automatic power operated, 2 panel center opening doors .

552.10 Landing doors:Automatic power operated, 2 panel center opening doors .

552.11 Full height Infra - red beam door safety system.

552.12 Entrance Door : 900mm (W) X 2000mm (H)

552.13 Lift Well Size : 1900mm (W) X 1900mm (D)

552.14 Car Size : 1300mm (W) X 1100mm(D) X 2200mm(H)

552.15 1.6mm thick Scratch proof Hair line Finish.

552.16 SS hand rail to be provided on all the three sides at 900 mm above floor level.

552.17 Car Ceiling with battery operated 10watt LED lights, alongwith LED driver & blower with two side ducts.

552.18 Intercom in car connected with fire control room/ reception area.

552.19 Firemen switch to be provided at ground floor for each group.

552.20 "Lift out of order / maintenance" to be provided in landing hall button only at each floor.

552.21 Voice announcement & music system in the car to announce the position of the elevator in the hoist way & in the car for all stops as the car stops at a floor served by the elevator.

Group surpervisory control.: one cars in one group Sets 3.00 1530000.00 4590000.00

553.00 Supply, installation, testing and commissioing of 10 passenger Machine room less passengers lift having contract speed of 1 MPS serving different floors in the existing lift shaft as

per detailed specifications enclosed and as under:-(OTIS/Schindled/A one)

553.01 Speed 1 MPS

553.02 Floors 3. nos. Lower Ground Floor to Second Floors

553.03 Travel 9.3 Meters (approx.)553.03 Travel 9.3 Meters (approx.)

553.04 Stops & opening 3/3

553.05 Controller: A.C. variable voltage & variable frequency.


553.07 Operation: Microprocessor based single automatic push button / duplex collective selective with / without attendant.

553.08 Power - 415V, 3 Phase, 50 Hz 4 wires sytem

553.09 Type of doors

553.10 Car : Automatic Power operated, Centre Opening sliding stainless steel scratch proof of approved sample.

553.11 Landing doors: Stainless steel scratch proof of approved sample.

553.12 Entrance door 1000mm(W) x 2000mm(H)

553.13 Car Height - 2200 MM

553.14 A hand rail at 900mm above floor level to be fixed on all three sides in the lift car.

553.15 Voice announcement system in the car to announce the position of the elevator in the hoistway as the car passes or stops at a floor served by the elevator. Set 8.00 1720000.00 13760000.00

554.00 Supply, installation, testing and commissioing of 13 passenger, Machine room less lift having contract speed of 1 MPS serving different floors in the existing lift shaft as per

detailed specifications enclosed and as under:-(OTIS/Schindled/A one)

554.01 Speed 1 MPS

554.02 Floors 3 nos. Ground Floor Plus second Floors

554.03 Travel 12 Meters (approx.)

554.04 Stops & opening 3/3

554.05 Controller: A.C. variable voltage & variable frequency.


554.07 Operation: Microprocessor based single automatic push button / duplex collective selective with / without attendant.

554.08 Power - 415V, 3 Phase, 50 Hz 4 wires sytem

554.09 Type of doors

554.10 Car : Automatic Power operated, Centre Opening sliding stainless steel scratch proof of approved finish.

554.11 Landing doors: Stainless steel scratch proof of approved finish.

554.12 Entrance door 1000mm(W) x 2100mm(H)

554.13 Car Height - 2400 MM


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

554.14 A hand rail at 900mm above floor level to be fixed on all three sides in the lift car.

554.15 Voice announcement system in the car to announce the position of the elevator in the hoistway as the car passes or stops at a floor served by the elevator. Sets 2.00 1953500.00 3907000.00

555.00 Supplying, Installation, testing & commissioning of 15 passengers lifts with Machine Room Less (1020 Kg.) having contract speed of 1.0 MPS serving different floors in the

existing lift shaft as per detailed specifications enclosed and as under :-(OTIS/Schindled/A one)

555.01 Speed - 1.0 MPS

555.02 Floors - Ground floor to 4th floor = 5


555.04 Stop & opening - 5(five) on same side



555.07 Operation: Microprocessor based automatic Simplex selective fully collective with / without attendant.







555.13 Lift Well Size : 1700mm (W) X 3000mm (D)


555.15 1.6mm thick Scratch proof Hair line Finish.555.15 1.6mm thick Scratch proof Hair line Finish.







555.22 Group surpervisory control.: one cars in one group Sets 1.00 2353500.00 2353500.00

556.00 Supplying, Installation, testing & commissioning of 16 passengers lifts with Machine Room Less (1088 Kg.) having contract speed of 1.0 MPS serving different floors in the

existing lift shaft as per detailed specifications enclosed and as under :-(OTIS/Schindled/A one)

556.01 Name & Location of Lifts:-

556.02 Speed - 1.0 MPS

556.03 Floors - Ground floor to 3rd floor = 4


556.05 Stop & opening - 4 (Four) on same side



556.08 Operation: Microprocessor based automatic Duplex selective fully collective with / without attendant.



S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.






556.14 Lift Well Size : 3000mm (D) X 1700mm (W)




556.18 Wall: 1.6mm thick Scratch proof Hair line Finish.

556.19 Front Wall:1.6mm thick Scratch proof Hair line Finish.

556.20 Fan: Cross Flow

556.21 Car Door: 1.6mm thick Scratch proof Hair line Finish.





556.26 Group surpervisory control.: one cars in one group Set 2.00 2530000 5060000.00

Sub-Head - XV : UPS

Supply, installation, testing & commissioning of the following:

557.00 IGBT based 3x40 KVA parallel True Online Double Conversion UPS suitable for unbalanced, 3 Phase input and 3 phase 415 V output UPS system with isolation transformer (i.e.,

K-13 type), suitable for operating in parallel and each comprising as per technical specification complete as required. Sets 3.00

558.00 Lead Acid sealed maintenance free batteries for 3x40 KVA UPS system, for providing 20 minutes back up to each 100 KVA UPS. Each bank of batteries shall comprise required

Nos. of SMF batteries etc as per specifications as required. Sets 3.00

559.00 Matching cabinet to house SMF batteries for 3x40 KVA UPS system along with interconnecting links and I/c S/F MCCB as required. Sets 3.00

Sub Head XVI: Fire Alarm & Public Address System

Intelligent Fire Alarm System

560.00 Supply, Installation, Testing and Commissioning of Microprocessor based inteligent and electronically addressable, modular, expandable networkable, 8 loops Panel (expandable)

with each loop capacity of 250 detectors with Loop length up to 3 KM. Fire alarm control panel with 5.7 inch touch screen LCD display, multiple acess levels, 10,000 event history

logs in the non volatile memory (EEPROM). The panel should be modular microprocessor based in nature and should be expandable from single loop to up to 32 loops. The panel

shall have 240V AC power supply, Automatic battery charger, 24V , ceiled lead acid maintanence free battries sufficient for 24 hours normal working and then be capable of

operating the system for 30 mins during emergency condtion. Panel shall be integratable to BMS Backnet software. The panel shall be EN54 / Vds /ULCertification.

560.01 The panel should have memory to save atleast 10000 events log history and should be ready to be networked with other panels. UL/VDS approved. The panel shall be integrated

with public address system complete as required. No. 2.00 680000.00 1360000.00

560.02 Supply, Installation, Testing and Commissioning of Auto Dialer shall be integratable with Fire alarm system by using interface module No. 1.00 25000.00 25000.00

561.00 Supply, installation, testing and commissioning of intelligent addressable Multisensor (Optical + Thermal) Detector with in built fault isolator feature (either in detector head or in

detector base) including the cost of base plate mounting as per specifications. Complete as required. No. 2145.00 4900.00 10510500.00

3317253.001105751.00


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

562.00 Supply, installation, testing and commissioning of intelligent addressable (ROR + Fixed temp) heat detector with in built fault isolator feature (either in detector head or in detector

base) including the cost of base plate mounting as per specifications. Complete as required. No. 266.00 4100.00 1090600.00

563.00 Supply, installation, testing and commissioning of addressable Control Modules for trip off/Activate of (AHU,Fire Damper,Pump, FANs etc.) with flexible network structures with a

maximun switching current of 1A @ 30V DC. Shall be EN54/ Vds Certification/ULNo. 48.00 4500.00 216000.00

564.00 Supply, installation, testing and commissioning of addressable Monitor Module with minimum of 2 independent addressable monitoring inputs for flow switch as per specifications.

Complete as required. Nos. 48.00 4500.00 216000.00

565.00 Supply , Installation , Testing & Commissioning of addressable type Duct Detector as per specifications. Complete as required. Nos.

566.00 Supply, installation, testing and commissioning of addresable Loop Powered Sounder including the cost of mounting as per specification. Complete as required. (In case of

separately powered sounders, cost of the power cable shall be inclusive in the cost of sounders itself and shall not be paid separately and power of sounders shall be fed from

main Fire Alarm Panel only) Nos. 100.00 5000.00 500000.00

567.00 Supply, Installation, Testing and Commissioning of Beam detector incuding mounting base along with Interface module to direct connnect to the loop , having a coverage area with

a distance of min. 10 m and max. 100 m with extra width of up to 14 m , havinh Protection category of IP 54 ,Operating temperature range: -20 C to +55 C, Response sensitivity

of 40% VdS compliantNos. 18.00 45000.00 810000.00

568.00 Supply, installation, testing and commissioning of addresable Manual Call point break glass type(Double Action) with alarm LED as per specifications. Complete as required.Nos. 100.00 3000.00 300000.00Nos. 100.00 3000.00 300000.00

569.00 Supply, installation, testing and commissioning of response indicator as per specifications. Complete as required. Nos. 742.00 700.00 519400.00

570.00 supply, Installation, connecting testing and commissioing of Active and networkable repeater panel with LCD display complete system function keys for programming and control

like system reset, alarm acknowledgement, alarm silence, trouble acknowledgement ...etc. as per specification.Nos. 2.00 95000.00 190000.00

571.00 Supply, Installation, Testing & Commissioning of Fire Command Station including Graphical User Interface Software. The GUI based main network software shall be capable of

graphically representing each node being monitored with floor plans and icons depicting the actual locations of the various systems; and / or sensors’ locations. Complete as

required. Nos. 4.00 225000.00 900000.00

571.01 a. Operator work station for Fire Command Station with PC having Intel Pentium Core -i5 Duo Processor including Serial ports (RS232) and USB ports (4 Nos )and following

accessories etc. complete with software all as specified.

571.02 b. 2 Gigabytes of RAM memory

571.03 c. 500 Gigabytes of hard disk space

571.04 d. DVD RW

571.05 e. 19” TFT colour monitor

571.06 f. Optical Mouse with Mouse Pad

571.07 g. Standard Key Board

571.08 h. Latest Windows Operating System

571.09 i. Compatible Fire Alarm System Control Software

571.10 j. Laser Printer- 1 No (Model :-1020 Plus Printer)

572.00 Supplying and Laying following sizes of Armoured screened FRLS tinned copper conductor cable.

572.01 2 Core 1.5 sq. mm Metre 36380.00 72.00 2619360.00


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

II)PUBLIC ADDRESS SYSTEM

572.00 SITC of EN-54 Certified EVAC controller, with 14x 4 Audio matrix with full DSP functionality. 8 audio inputs, 4 audio outputs, 4 channel output matrix. Shall support single line

switching or redundant group A/B switching, amplifier redundany, 4 x 100V audio inputs and 12 speaker line outputs. 8000 fault, warning and event conditions log. Built in

message manager for 100 emergency/business calls up to 85 minutes. 10 control inputs and 13 control outputs. Should be able to send 2 different pre-recorded messages

simultaneously. Impedance measurement and Pilot Tone supervision for speaker line monitoring. Shall be able to handle up to 2000Watt load, 20 routers, 16 call stations, 492

speaker zones.Frequency response (ref. 1 kHz) 20 Hz to 20 kHz (-0.5 dB), Signal-to-noise ratio (A-weighted): Line in to line out: 106 dB typical, THD+N < 0.05%, Crosstalk (line

level) Line in to line out (0 dB gain): < 100 dB at 1 kHz, Sample rate 48 kHz, DSP processing resolution 24-bit linear A/D and D/A conversion, 48-bit processing

No. 4.00 206726.3 826905.00

573.00 SITC of EN54 Certified EVAC Router for 24 zones to route 4 channels into 8 100V audio inputs to 24 loudspeaker line outputs. 2-in-6 matrix. 20 Control Inputs, 26 Control

Outputs. Shall support single line switching or redundant group A/B switching, amplifier redundancy. Impedance measurement and Pilot Tone supervision for speaker line

monitoring. Shall be able to handle up to 4000Watt load. Nos. 4.00 177369.5 709478.00

574.00 SITC of EN-54 certified 2x 500W Class D, high efficiency amplifier. 70/100V loudspeaker output voltages, galvanically separated, 4 automatic selectable audio inputs on RJ45,

local input. THD ≤1%. Frequency response, ref. 1 kHz, rated load, -3 dB : 50 Hz to 25 kHz. Signal-to-noise ratio (A-weighted) > 104 dB, Output noise (A-weighted) < -62 dBu,

Crosstalk , ref. 1 kHz < -85 dB. Audio input level limiter, RMS output power limiter, high temperature, DC, short circuit, mains undervoltage protection, DC supply undervoltage

protection, inrush current limiter, ground fault Nos. 12.00 222610.3 2671324.00

575.00 SITC of EN-54 certified Call Station with built in numerical keypad, Multilanguage LCD display , gooseneck microphone with supervised electret microphone, pop shield and

permanent monitoring, integrated loudspeaker for system sounds. Five menu/function keys, 15 customizable function and speed dial buttons. Possible to use keys for o Zone

select, source select, level control, emergency on/off, message on/off, failure acknowledge/reset, Switching output trigger on/off or 0 to 10V, select scheduled events, scheduled

event on/off. Call Station is supervised by system controller can be expanded by connecting 5 additional extention keypads Nos. 8.00 80300 642400.00

576.00 SITC of call station extension shall be EN54-16 compliant. It shall be designed in a robust and modern chassis. It shall expand the call station by 20 customizable functions keys.

• 20 free customable functions keys, and two LEDs per button (green/red).

• It shall be possible to program button functions as:

o Zone select, source select, level control, emergency on/off, message on/off, failure acknowledge/reset.

o switching output trigger on/off or 0 to 10V, select scheduled events, scheduled event on/off.

• An LED shall also be programmable for own indication functionality

Nos. 8.00 47300 378400.00

577.00 SITC of 6W ceiling mount speaker with excellent speech & music reproduction

- Max Power: 9W,Rated Power: 6Watts, Power Tapping: 6/3/1.5W

- Effective frequency range(-10 dB) :150 Hz to 15KHz

- SPL at rated power (1Khz at 1 m) 108 dBNos. 1362.00 770 1048740.00

578.00 SITC of 6W wall mount speaker with excellent speech & music reproduction

- Max Power: 9W,Rated Power: 6Watts, Power Tapping: 6/3/1.5W

- Effective frequency range(-10 dB) : 150 Hz to 15KHz

- SPL at rated power (1Khz at 1 m) 96 dB

- Opening Angle 1 KHz / 4 KHz (-6 dB): 150/70 Nos. 176.00 1210 212960.00

579.00 SITC of CD/DVD Player -Professional grade No.

580.00 SITC of Armored Cupper speaker cable 2 Core 1.5sqmm mtr 24530.00 72 1766160.00

581.00SITC of 19 "Equipment Rack,36 U Made of MS for housing of all above equipment , front lockable glass door, Fan tray fro colling, Caster wheel base , Main Panel with Spike

Buster, Indivdual FUSE power supply unit, including all internal wiring/ interconnection as required No. 1.00 48000 48000.00

582.00 Supplying & Drawing LAN cable (CAT6) (Brand approved by EIC) in prelaid PVC rigid conduit/ in polythene pipe embeded in wall. mtr 1400.00 28 39200.00

583.00 SITC of 32mm GI Electrical Conduit mtr 1952.00 180 351360.00


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

Sub Head XVII: SITC of Integrated IT Data Networking, Active, Voice and EPABX SystemBengal

584.00 Supply, Installation, Testing & Commissioning of Server Rack Switch 48 X 10 Gbps Ethernet and 40 Gbps 6 uplinks with moduls for server connectivity as per Specification etc. all

complete. No. 2.00 14,66,760.00 2933520.00

585.00 Supply, Installation, Testing & Commissioning of Access switch with redundant sup 8E and 5 x 48 port 1G line cards as per Specification etc. all complete. No. 4.00 49,38,500.00 19754000.00

586.00 Supply, Installation, Testing & Commissioning of 24 Port Layer 3 switch with support upto 10 GBPS each port as per Specification etc. all complete. No. 8.00 3,16,900.00 2535200.00

587.00 Supply, Installation, Testing & Commissioning of 48 Port Layer 2 UPOE switch with support upto 10 GBPS each port as per Specification etc. all complete. No. 30.00 2,36,800.00 7104000.00

588.00 Supply, Installation, Testing & Commissioning of 24 Port Layer 2 UPOE switch with support upto 10 GBPS each port as per Specification etc. all complete. No. 25.00 1,77,600.00 4440000.00

589.00 Supply, Installation, Testing & Commissioning of WiFi Controller which can manage upto 250 AP as per Specification etc. all complete. No. 2.00 31,67,460.00 6334920.00

590.00 Supply, Installation, Testing & Commissioning of Latest Technology Indoor AP which can be Run on the Campus as per Specification as per Specification etc all complete. etc. all

complete. No. 71.00 54,720.00 3885120.00

591.00 Supply, Installation, Testing & Commissioning of Latest Technology Outdoor AP which can be Run on the Campus as per Specification as per Specification etc. all complete.No. 11.00 78,936.00 868296.00

592.00 Supply, Installation, Testing & Commissioning of 100% Non Blocking Fully Digital Integrated Services Digital Network Compatible Voice Over Internet Telephone(VoIP) ready 19"

Rack mountable EPABX presently equiped with 04 ISDN PRI Trunk Lines (120 Channel) 16 Digital Extension 408 Analogue Extension, Expandable up to 2000 Ports/Channels and

other as per the given Specification etc. all complete. No. 1.00 55,53,750.00 5553750.00

593.00 Supply, Installation, Testing & Commissioning of IP User Linceses for 10 Users etc. all complete. No. 25.00 35,000.00 875000.00

594.00 Supply, Installation, Testing & Commissioning of 16 Port Digital Card etc. all complete. No. 3.00 36,640.00 109920.00

595.00 Supply, Installation, Testing & Commissioning of 24 Port Analouge Card etc. all complete. No. 38.00 26,080.00 991040.00

596.00 Supply, Installation, Testing & Commissioning of High End Digital KEY PHONE 6x24 Display with 24 Programmable Dual Color LED’s with 4 Feature Access Keys, multi-step Tilt596.00 Supply, Installation, Testing & Commissioning of High End Digital KEY PHONE 6x24 Display with 24 Programmable Dual Color LED’s with 4 Feature Access Keys, multi-step Tilt

angle adjustment, Navigator Key, backlit display, should have option to connect Blue Tooth etc. all complete.No. 3.00 15,840.00 47520.00

597.00 Supply, Installation, Testing & Commissioning of Low End DIGITAL KEY PHONE 1x16 Display with 8 Programmable Dual Color LED’s etc. all complete. No. 12.00 6,240.00 74880.00

598.00 Supply, Installation, Testing & Commissioning of SUPER HIGH END IP PHONE IP PHONE with color Touch LCD screen, built-in graphical user interface (GUI). Includes built-in

speakerphone, SD card slot for programming and data backup, Bluetooth compatible (with optional module), able to register IP Cameras and control PTZ functionality ,Blue Tooth ,

Power over Ethernet (PoE) etc. all complete.No. 6.00 42,399.00 254394.00

599.00 Supply, Installation, Testing & Commissioning of LOW END IP PHONE IP PHONE IP PHONE 1x16 Display with 8 Programmable Dual Color LED’s etc. all complete. No. 12.00 7,199.00 86388.00

600.00 Supply, Installation, Testing & Commissioning of MID END ANALOG PHONE Analog Phone With Speaker , Small Display etc. all complete. No. 902.00 1,359.00 1225818.00

601.00 Supply, Installation, Testing & Commissioning of Firewall in HA Moduler chasis upto 8 Slots with IPS , APT , URL , Wild Fire , Threat prevention one year subscription ,Network

Processing Card with 12x10/100/1000 RJ-45 Ethernet, 8x1GbE SFP and 4x10GbE SFP+, 8M sessions, Extended memory. etc. all complete.No. 2.00 98,08,320.00 19616640.00

602.00 Supply, Installation, Testing & Commissioning of Spl DK PS Frame,1000Wx2000Hx1200D (1 nos. of 1000Wx2000Hx600D with Baying tube), Top cover with rear fixed & slideable

gland plate with foam insert for cable entry, bottom cover with standard gland plates with foam insert for cable entry and rear 4nos. of 50mm dia rubber grommets as per std., 2

pairs of 42U 19" L - type angles & special assembly kit for mounting 19" angles & punched sections. (Color: RAL 7035) Complete with 11 KVA Power and 7TR Cooling in complete.

It consist of in built Temperature, Humidity, Automatic door opening & leakage Monitoring System. with Signal Pillar Fire Extinguisher System etc. all complete.

No. 4.00 14,06,980.00 5627920.00

603.00 Supply, Installation, Testing & Commissioning of Fiber Runner 4x4 Channel etc. all complete. No. 14.00 8,960.00 125440.00

604.00 Supply, Installation, Testing & Commissioning of Fiber Runner 4x4 Snap-on Hinged Cover etc. all complete. No. 12.00 7,343.00 88116.00

605.00 Supply, Installation, Testing & Commissioning of Fiber Runner 4x4 QuikLock Trapeze Bracket-1/2'' Threaded Rod etc. all complete. No. 45.00 5,304.00 238680.00

606.00 Supply, Installation, Testing & Commissioning of Fiber Runner 4x4 QuikLock Coupler etc. all complete. No. 14.00 2,108.00 29512.00

607.00 Supply, Installation, Testing & Commissioning of FiberRunner Spill-Over Junction with 2x2 Exit (yellow) etc. all complete. No. 8.00 9,656.00 77248.00

608.00 Supply, Installation, Testing & Commissioning of FiberRunner 2x2 QuikLock Coupler etc. all complete. No. 8.00 2,176.00 17408.00

609.00 Supply, Installation, Testing & Commissioning of Fitting, 1-Port Spillout to 1.5'' (38mm) Inside Diameter Corrugated Tubing, YL etc. all complete. No. 4.00 3,000.00 12000.00

610.00 Supply, Installation, Testing & Commissioning of FiberRunner Spill-Over Junction with 2x2 Exit - FiberRunner 4x4 Channel Cover (yellow) etc. all complete. No. 8.00 3,182.00 25456.00

611.00 Supply, Installation, Testing & Commissioning of FiberRunner 4x4 End Cap etc. all complete. No. 4.00 1,170.00 4680.00

612.00 Supply, Installation, Testing & Commissioning of FiberRunner 4x4 Horizontal Right Angle Fitting etc. all complete. No. 2.00 8,092.00 16184.00

613.00 Supply, Installation, Testing & Commissioning of FiberRunner 4x4 Horizontal Right Angle Split Cover etc. all complete. No. 2.00 5,032.00 10064.00

614.00 Supply, Installation, Testing & Commissioning of FiberRunner 4x4 Horizontal Left Angle Fitting etc. all complete. No. 2.00 8,092.00 16184.00

615.00 Supply, Installation, Testing & Commissioning of FiberRunner 4x4 Horizontal Left Angle Split Cover etc. all complete. No. 2.00 6,632.00 13264.00

616.00 Supply, Installation, Testing & Commissioning of FiberRunner 4x4 Outside Vertical Right Angle Fitting etc. all complete. No. 2.00 13,396.00 26792.00

617.00 Supply, Installation, Testing & Commissioning of FiberRunner 4x4 Outside Vertical Right Angle Split Cover etc. all complete. No. 2.00 10,064.00 20128.00


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

618.00 Supply, Installation, Testing & Commissioning of Fitting, Horizontal Tee, 4" x 4" (100mm x 100mm), FiberRunner, YL etc. all complete. No. 2.00 9,860.00 19720.00

619.00 Supply, Installation, Testing & Commissioning of Split Cover, Horizontal Tee, 4" x 4" (100mm x 100mm), FiberRunner, YL etc. all complete. No. 2.00 7,071.00 14142.00

620.00 Supply, Installation, Testing & Commissioning of Fitting, Horizontal Four way, 4" x 4" (100mm x 100mm), FiberRunner, YL etc. all complete. No. 1.00 17,200.00 17200.00

621.00 Supply, Installation, Testing & Commissioning of Split Cover, Horizontal Four way , 4" x 4" (100mm x 100mm), FiberRunner, YL etc. all complete. No. 1.00 13,056.00 13056.00

622.00 Supply, Installation, Testing & Commissioning of 12'' Wide Wyr-Grid Straight Section etc. all complete. No. 30.00 3,160.00 94800.00

623.00 Supply, Installation, Testing & Commissioning of 12'' Wide Wyr-Grid Trapeze Brackets etc. all complete. No. 15.00 3,840.00 57600.00

624.00 Supply, Installation, Testing & Commissioning of Wyr-Grid 4'' Sidewall etc. all complete. No. 60.00 1,200.00 72000.00

625.00 Supply, Installation, Testing & Commissioning of Wyr-Grid 4'' Sidewall Waterfall and intersection etc. all complete. No. 5.00 3,880.00 19400.00

626.00 Supply, Installation, Testing & Commissioning of Wyr-Grid Splice Connector for 12'' & 18'' Widths etc. all complete. No. 15.00 6,120.00 91800.00

627.00 Supply, Installation, Testing & Commissioning of High Snapon Intersaction bend Radius Control etc. all complete. No. 4.00 8,976.00 35904.00

628.00 Supply, Installation, Testing & Commissioning of 100*125 Self Laminated Labels for Patchcord pack of 2500 pc etc. all complete. Sets 3.00 12,716.00 38148.00

629.00 Supply, Installation, Testing & Commissioning of 35*195 Self Laminated Labels for Faceplate pack of 1000 pc etc. all complete. Sets 4.00 9,112.00 36448.00

630.00 Supply, Installation, Testing & Commissioning of 40*261 Self Laminated Labels for Jackpanel pack of 1000 pc etc. all complete. Sets 4.00 9,860.00 39440.00

631.00 Supply, Installation, Testing & Commissioning of Velcro tie roll of 75 Feet HLS-75 etc. all complete. Sets 20.00 3,944.00 78880.00

632.00 Supply, Installation, Testing & Commissioning of 188*4.8 Nilon 6/6 Natural with standing 85 degree pack of 1000 pc etc. all complete. Sets 20.00 2,312.00 46240.00

633.00 Supply, Installation, Testing & Commissioning of 368*4.8 Nilon 6/6 Black UV with standing 85 degree pack of 1000 pc etc. all complete. Sets 3.00 3,740.00 11220.00

634.00 Supply, Installation, Testing & Commissioning of Thermal Transfer Hand Held Printer with minium 10 cartages & bagpack etc. all complete. No. 1.00 64,124.00 64124.00

635.00 Supply, Installation, Testing & Commissioning of Adjustable Fabric Wrist Strip etc. all complete. No. 8.00 3,176.00 25408.00

636.00 Supply, Installation, Testing & Commissioning of Access Grounding Clamp for 7/8" Square 1" round and 1 1/18" Round Pedestals etc. all complete. No. 8.00 3,840.00 30720.00

637.00 Supply, Installation, Testing & Commissioning of HTCT2-2-1 HTAP and CLRCCVR2-1 Clear Cover etc. all complete. No. 1.00 3,080.00 3080.00

638.00 Supply, Installation, Testing & Commissioning of Bronze Grounding Clamp Wire Dia range 1 1/4 IPS etc. all complete. No. 1.00 84,004.00 84004.00

639.00 Supply, Installation, Testing & Commissioning of C Type Copper Thin Wall Comparession tap type CTAPF etc. all complete. No. 3.00 9,520.00 28560.00

640.00 Supply, Installation, Testing & Commissioning of 1/4"x4"x12" Grounding Busbar etc. all complete. No. 1.00 40,000.00 40000.00

641.00 Supply, Installation, Testing & Commissioning of Raised Floor Air Sealing Grommet, Overall size of 6" x 8" etc. all complete. No. 8.00 4,352.00 34816.00

No. 8.00 2,951.20 23610.00642.00 Supply, Installation, Testing & Commissioning of Jumper Kits, Common Bonding Network (CBN), #6 AWG (16mm²) Jumper, 60" (1.52m) Length etc. all complete. No. 8.00 2,951.20 23610.00

643.00 Supply, Installation, Testing & Commissioning of Grounding Strip Kits, One, 78.65" (2m) x .67" (17mm) x .05" (1.27mm) Strip etc. all complete. No. 16.00 7,616.00 121856.00

644.00 Supply, Installation, Testing & Commissioning of Tool-Less Blanking Panel, 1 Rack Unit, Square Hole etc. all complete. No. 35.00 1,160.00 40600.00

645.00 Supply, Installation, Testing & Commissioning of Full-length blanking shade blanks etc. all complete. No. 2.00 36,480.00 72960.00

646.00 Supply, Installation, Testing & Commissioning of 1 U PVC Cable Manager as per given Specification etc. all complete. No. 125.00 2,880.00 360000.00

647.00 Supply, Installation, Testing & Commissioning of 12-core Outside Plant Cable - Corrugated Steel tape Armored, HDPE Sheath 9/125 MM, etc. all complete. Meters 6000.00 295 1770000.00

648.00 Supply, Installation, Testing & Commissioning of 6-core Outside Plant Cable - Corrugated Steel tape Armored, HDPE Sheath 50/125 MM, OM4 etc. all complete. Meters 4000.00 204 816000.00

649.00 Supply, Installation, Testing & Commissioning of FMS, 19"RM, 1U 24F SM SCAPC Loaded with Adapters and pigtails (Couplers, splicetrays & panels included) Fully loaded with

SC APC Pigtails & adapters for all 24 cores etc. all complete. No. 24.00 31,520.00 756480.00

650.00 Supply, Installation, Testing & Commissioning of FMS, 19"RM, 1U 12F MM SCAPC Loaded with Adapters and pigtails (Couplers, splicetrays & panels included) Fully loaded with

SC APC Pigtails & adapters for all 12 cores etc. all complete. No. 20.00 24,000.00 480000.00

651.00 Supply, Installation, Testing & Commissioning of 19"19U IP 66/67 RATED Wall Mount rack with necessary accessories etc. all complete. No. 4.00 1,65,163.50 660654.00

652.00 Supply, Installation, Testing & Commissioning of Rack mounting hardware/kit for mounting active and passive component in rack (Pack of 10) etc. all complete. No. 150.00 380 57000.00

653.00 Supply, Installation, Testing & Commissioning of 32mm ISI marked or equivalent PVC Flexible Pipe / PVC Duct etc. all complete. No. 3050.00 105 320250.00

654.00 Supply, Installation, Testing & Commissioning of Copper Cable, Cat 6A, 4-Pair, 1000ft/305m reel etc. all complete. No. 660.00 17,890.00 11807400.00

655.00 Supply, Installation, Testing & Commissioning of 24-port patch panel with labels (.DATA) etc. all complete. No. 91.00 11,500.00 1046500.00

656.00 Supply, Installation, Testing & Commissioning of I/O Module, Cat 6A, UTP, 8 pos 8 wire etc. all complete. No. 1829.00 650 1188850.00

657.00 Supply, Installation, Testing & Commissioning of Category 6A, 10 Gb/s UTP patch cord (DATA) 2 Mtr for Data. etc. all complete. No. 1829.00 700 1280300.00

658.00 Supply, Installation, Testing & Commissioning of Category 6A, 10 Gb/s UTP patch cord (DATA) 2 Mtr etc. all complete. No. 1829.00 700 1280300.00

659.00 Supply, Installation, Testing & Commissioning of 24-port patch panel with labels (Voice) etc. all complete. No. 111.00 12,300.00 1365300.00

660.00 Supply, Installation, Testing & Commissioning of I/O Module, Cat 6A, UTP, 8 pos 8 wire For Voice. etc. all complete. No. 1087.00 650 706550.00

661.00 Supply, Installation, Testing & Commissioning of Category 6A, 10 Gb/s UTP patch cord (DATA) 2 Mtr etc. all complete. No. 1087.00 700 760900.00

662.00 Supply, Installation, Testing & Commissioning of 1 U Wire Manager with Front and Back etc. all complete. No. 111.00 2,350.00 260850.00

663.00 Supply, Installation, Testing & Commissioning of 1200 Pair MDF Box with Mounting Frame as per given Specification etc. all complete. No. 2.00 99,600.00 199200.00




667.00 Supply, Installation, Testing & Commissioning of MM OM4 SC-LC Patch Cord 3 Meter etc. all complete. No. 40.00 3,400.00 136000.00

668.00 Supply, Installation, Testing & Commissioning of SM OS2 SC-LC Patch Cord 3 Meter etc. all complete. No. 30.00 3,080.00 92400.00

669.00 Supply, Installation, Testing & Commissioning of 10 Pair Krone Module as per given Specification etc. all complete. etc. all complete. No. 240.00 550 132000.00

670.00 Supply, Installation, Testing & Commissioning of 25 Pair Riser cable as per given Specification etc. all complete. Meters 8200.00 650 5330000.00


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

671.00 Supply, Installation, Testing & Commissioning of Network Racks of 800mm Width 2000mm height 1200mm Deep Irack etc all complete 42 U. etc. all complete. No. 10.00 1,08,580.00 1085800.00

672.00 Supply, Installation, Testing & Commissioning of GR 55 100G Mesh Cable Tray 55*100*3000 etc. all complete. Meters 300.00 680 204000.00

673.00 Supply, Installation, Testing & Commissioning of GR 55 300G Mesh Cable Tray 55*300*3000 etc. all complete. Meters 300.00 1,300.00 390000.00

674.00 Supply, Installation, Testing & Commissioning of GR 55 600G Mesh Cable Tray 55*600*3000 etc. all complete. Meters 300.00 2,650.00 795000.00

675.00 Supply, Installation, Testing & Commissioning of Joint Connection etc. all complete. No. 450.00 170 76500.00

676.00 Supply, Installation, Testing & Commissioning of Side Holder M10FT etc. all complete. No. 800.00 385 308000.00

Sub Head XVIII: SITC of Integrated Presentation, Sound Reinforcement, Stage Lighting and Furnishing System

677.00 SITC of Digital Projector 1-chip DLP Laser phosphor, 1920X1200 native resolution, Brigghtness 13,500 lumens, Contrast Ratio : up to 700000 : 1, Lamp life 20000 hours,

Motorized horizontal and vertical lens offset , 3D ready, Inputs: HDMI x 2, DVI-D, Display Port , HD15, HD base T , Controls: RS232 in/out, RS422 in, Ethernet (10/100), USB,

device, should be complete with lens etc. all complete.No. 8.00 17,56,480.00 14051840.00

678.00 SITC of SITC of 1-chip DLP Solid state(Laser Phosphor) Projector, Brightness 6000 Lumens , 100000:1 contrast ratio,1920 x 1200 Native Resolution, 16:10 Native Aspect

Ratio,Lamp Life : 20000 hours. Inputs: HDMI, VGA ,HDBase-T,DisplayPort, Compostive Video, S-Video & USB, multiple Zoom Lens etc. all complete. No. 35.00 6,21,200.00 21742000.00

679.00 SITC of LED Projector, Laser / LED Hybrid Light sources, WXGA (1200x800) Resolution, 3500 Ansi Lumens, Light source life app. 20000 Hrs, Input 1*HDMI, 1*HDMI / DVI-D,

VGA, Audio In, Output: Audio Out etc. all complete.No. 75.00 95,600.00 7170000.00

680.00 SITC of Motorised Ceiling mounting Lift arrangemetns for above projector, Electrically operated, lifting capacities up to 100 lb (45 kg) with all required accessories etc. all complete.

No. 9.00 1,16,716.00 1050444.00

681.00 SITC of Ceiling Mount kit for projector with all required accessories etc. all complete. No. 102.00 6,500.00 663000.00

682.00 SITC Motorised Projection Screen, Diagonal size 180", Matt White Projection Surface, Aspect Ratio 16:10, builtin motor system with IR/RF receiver, high gain & viewing angle ,

Noise less Up/Down operation, Iamge Size: Min. 180" Diagonal etc. all complete. No. 4.00 1,56,500.00 626000.00

683.00 SITC Motorised Projection Screen, Diagonal size 150", Matt White Projection Surface, Aspect Ratio 16:10, builtin motor system with IR/RF receiver, high gain & viewing angle ,683.00 SITC Motorised Projection Screen, Diagonal size 150", Matt White Projection Surface, Aspect Ratio 16:10, builtin motor system with IR/RF receiver, high gain & viewing angle ,

Noise less Up/Down operation, Iamge Size: Min. 150" Diagonal etc. all complete.No. 30.00 1,00,320.00 3009600.00

684.00 SITC Motorised Projection Screen, Diagonal size 130", Matt White Projection Surface, Aspect Ratio 16:10, builtin motor system with IR/RF receiver, high gain & viewing angle ,

Noise less Up/Down operation, Iamge Size: Min. 130' Diagonal etc. all complete. No. 77.00 64,400.00 4958800.00

685.00 SITC of 55-inch Display Panel, 4K UHD 3840 x 2160 (16:9) Resolution, Brightness 400 nits or more, Contrast ratio 1200:1 or better, Inputs HDMI, Display Port, VGA, Video In,

Audio inputs, Audio outputs etc. all complete. No. 17.00 1,28,000.00 2176000.00

686.00 SITC of 75-inch Display Panel, 4K UHD 3840 x 2160 (16:9) Resolution, Brightness 400 nits or more, Contrast ratio 1200:1 or better, Inputs HDMI, Display Port, VGA, Video In,

Audio inputs, Audio outputs etc. all complete.No. 4.00 4,48,000.00 1792000.00

687.00 SITC of Wall Mount Kit for 55"-70" display with all required accessories etc. all complete. No. 9.00 8,500.00 76500.00

688.00 SITC of Wireless Presenter: Wireless operating distance: Approx 10m, Wireless technology: 2.4GHｚwireless technology, Interface: USB, etc. all complete. No. 107.00 12,500.00 1337500.00

689.00 SITC of Wireless Presentation and Collaboration Solution, Enables wireless presentation of HD content using laptops, tablets, and smartphones, Compatible with Windows, OS X,

Apple iOS, and Android, Displays up to four presentation sources at once in Quad View, Supports up to 32 or more simultaneous presenter connections, Supports display

resolutions up to Full HD 1080p and UXGA/WUXGA, Provides HDMI, VGA etc. all complete. No. 14.00 1,41,200.00 1976800.00

690.00 SITC of Desktop Hidden Connection Box, Mechanical Locking Device, Smooth Pneumatic Support Structure, VGA with Audio, HDMI, Network / Telephone, Power , Neat &

elegant topside, Input voltage: 110V-220V / 50-60Hz, 3.5 mm Audio Jack, USB, Surface Mountable Enclosure for Cables etc. all complete. No. 72.00 23,600.00 1699200.00

691.00 SITC of Dual Full HD Video Confernce System, 1080HD PTZ camera, dual micpod, data sharing through DVI/HDMI input, 2nd monitor support, with remote and cables, 1 + 3 Built

In Multiparty No. 5.00 3,40,160.00 1700800.00

692.00 SITC of Wooden lectern with wired microphone connectivity, 25" table top, with reading lamps, Cable management, Large reading surface as required with cables & connectors as

required etc. all complete. No. 83.00 72,000.00 5976000.00

693.00 SITC of Digital Madular Matrix Switcher, Modular Design, 8 Input & 8 Output frame, Pixel Accurate Reclocking, Frame Detector and Input Signal Analysis, Zero frame Delay,

Combine non-HDCP and HDCP capable, 1 Preveiw input & Output Port (Video Signals) with all require accessories etc. all complete.No. 4.00 5,16,800.00 2067200.00

694.00 SITC of Input Cards: Combine / Combination of 4 HD Base T & 4 HDMI input port, HDMI 1.4; DVI and HDCP compliant, support 4K, UHD (30Hz RGB 4:4:4, 60Hz YCbCr 4:2:0),

Supports all HDMI audio formats, PoE add- on option with all required accessories etc. all complete No. 4.00 3,90,000.00 1560000.00

695.00 SITC of Output Cards: Combine / Combination of 4 HD Base T & 4 HDMI output port, HDMI 1.4; DVI and HDCP compliant, support 4K, UHD (30Hz RGB 4:4:4, 60Hz YCbCr

4:2:0), Supports all HDMI audio formats, Audio De-Embedding output, PoE add- on option with all required accessoriesNo. 4.00 4,70,000.00 1880000.00


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

696.00 SITC of Matrix Switcher, 4 HDMI, 2 HD Base T and 4 Audio inputs, 2 HDMI, 2 HD Base T and 2 balanced audio outpts, supports 4K@30Hz and 3D capabilities, supports HDMI

1.4, Fully HDCP compliant, Advanced EDID Management, Audio insertion and de-embedding capabilities, Transmits digital video, audio and control to a distance of up to 170m

over single Catx Cable etc. all complete. No. 35.00 3,71,280.00 12994800.00

697.00 SITC of Matrix Switcher, 3 HDMI, 1 HD Base T and 4 Audio inputs, 2 HDMI, 2 HD Base T and 2 balanced audio outpts, supports 4K@30Hz and 3D capabilities, supports HDMI

1.4, Fully HDCP compliant, Advanced EDID Management, Audio insertion and de-embedding capabilities, Transmits digital video, audio and control to a distance of up to 170m

over single Catx Cable etc. all complete. No. 86.00 1,69,040.00 14537440.00

698.00 SITC of Multi Format Transmitter: 1 HDMI, 1 VGA and 1 Audio inputs, 1 HD Base T output, Handles video resolutions up to 4K/UHD (30Hz RGB 4:4:4, 60Hz YCbCr 4:2:0), HDCP

compliant, Advance EDID Management, Bi-directional RS-232 and IR, Extends digital video, audio, and control signals over a single CAT type twisted pair upto 330 ft (100 m) etc.

all complete.No. 60.00 1,23,200.00 7392000.00

699.00 SITC of Active Wall Plate: VGA, HDMI, DisplayPort and Audio Input, 4K/UHD (30Hz RGB 4:4:4, 60Hz YCbCr 4:2:0) support and 3D capabilities, VGA, YPrPb, HDMI1.4 and DP

1.1 signal support, Autoselect mode, HDCP compliant, CEC, EDID transparent, HDBaseT compatibility, Extends HDMI, DisplayPort, VGA, Audio, Ethernet, RS-232, IR over a

single CATx cable up to 170 m distance etc. all complete. No. 92.00 1,49,520.00 13755840.00

700.00 SITC of HDMI Transmitter, 1 HD Base T output and 1 HDMI Input, HDMI extension supporting 4K/UHD (30Hz RGB 4:4:4, 60Hz YCbCr 4:2:0) and 3D capabilities over one CATx

cable up to 170 m distance, Bi-directional RS-232 and IR, HDCP 2.2 compliant, CEC, EDID transparent etc. all complete.No. 4.00 39,600.00 158400.00

701.00 SITC of HDMI Reciver, 1 HD Base T input and 1 HDMI Output, HDMI extension supporting 4K/UHD (30Hz RGB 4:4:4, 60Hz YCbCr 4:2:0) and 3D capabilities over one CATx

cable up to 170 m distance, Bi-directional RS-232 and IR, HDCP 2.2 compliant, CEC, EDID transparent etc. all complete.No. 92.00 39,600.00 3643200.00

702.00 SITC of Digital Signal Processor, 8 balanced microphone / Line input, 8 balanced microphone / line output, 24 bit A/D, D/A conversion, 64 bit processing core, Built in AEC, AFC,

Auto Mixer, RS232 bi directional control, supports third party control, supports 50 preset function etc all completeNo. 9.00 1,16,760.00 1050840.00

703.00 SITC of Ceiling Speaker, Bass reflex type, Rated power 30 W, Impedance 16 Ω / 8 Ω, 100 / 70 V, Sound Pressure Level 90 dB (1 W, 1 m) or more, Frequency Response 70 Hz -

20 kHz or better, 4" Cone type, complete with standard accessories etc all completeNo. 778.00 8,500.00 6613000.00No. 778.00 8,500.00 6613000.00

704.00 SITC of Slim Line Array, Bass-reflex type, Continuous program: 180 W, Impedance 8 Ω, Sensitivity 90 dB (1 W, 1 m), Frequency Response 90 Hz - 17 kHz, Speaker Component

2.8"× 9, Directivity Angle Horizontal: 90゜, Vertical: 20゜with standard accessories etc all completeNo. 6.00 36,544.00 219264.00

705.00 SITC of Mixer Power Amplifier, Rated Power 240W, 3 Microphone inputs, 2 Aux inputs, Frequency Response 50 - 20,000 Hz or better, Speaker output, Recording out, Atleast one

input supports Phantom power, Volume control, Tone control, with all required accessories etc all completeNo. 104.00 30,520.00 3174080.00

706.00 SITC of Power Amplifier, Dual Channel, Class D, Rated out put 250Wx2, 500W in bridge mode, impedence 4/8 Ohms Frequency Response 20 Hz - 20 kHz, S/N Ratio 100 dB (A-

weighted) etc all completeNo. 3.00 95,600.00 286800.00

707.00 SITC of Digital Steerable Speaker with minimum 32 x 3”to 4" LF, 16 x 1” HF Driver, Class D, 120 degrees X Variable -50 degrees to + 50 degrees degrees, Single or multiple

beams with typical range of 80 meters, LF beam control limit 200 Hz, Frequency range 110 Hz – 18 kHz, Max SPL - 101 dB SPL or better at 30 meter, Sampling rate 48 to 96 kHz,

Network monitoring, 2 inputs, Phoenix 6-pin connectors, Dual RJ45 connectors, Complete with with mounting accessory and installation as per the site requirement etc all complete

No. 4.00 14,16,800.00 5667200.00

708.00 SITC of self powered USB or RS232 computer connection device with capacity of driving 1 km of network cable,Female 9 pin 'D connector etc complete with installation as per the

site requirement etc all completeNo. 2.00 34,000.00 68000.00

709.00 SITC of Passive Two Way Multiple Driver Column Array Loudspeaker consisting of 7 x 3.5" to 4" LF driver or better , 6- 8 x 1" HF driver or better with 200 W RMS Power @ 8/12

Ohms ,Frequency Response 110 Hz - 18 kHz ,Sensitivity 91 dB,130 degrees horizontal dispersion,Maximum SPL 114 dB etc complete with installation as per site requirement

with standard accessories etc all completeNo. 9.00 78,848.00 709632.00

710.00 SITC ofHigh Output 2 x 12" or 15" Subwoofer delivering 800 W rms @ 4 / 8 ohms , Frequency Response 35 Hz - 200 Hz, System Sensitivity 100 dB or better, Maximum SPL

Average 128 dB;Peak 134 dB Birch Plywood Construction etc complete with mounting accessory,installation as per the site requirement etc all completeNo. 12.00 1,24,800.00 1497600.00

711.00 SITC of Stage Front Fill Speaker Passive 8" Dual Concetric or better point source loudspeaker with 130 W rms or better output @ 4/8 Ohms , Frequency Response 65 Hz - 20

kHz, 90 dB or better System Sensitivity, 70 degrees x 60 degree dispersion, Maximum SPL 118 dB Peak or better, Birch Plywood Construction complete with Yoke Bracket.

installation as per the site requirement etc all completeNo. 16.00 48,505.60 776090.00

712.00 SITC of Stage Monitor, Full Range Passive Dual Concentric or better point source loudspeaker consisting of 12" LF driver with 400 W or better Program power @ 8 Ohms,

Frequency Range 60 Hz - 20 kHz, System Sensitivity 96 dB or better, 90 x 60 degrees dispersion, Maximum SPL 125 dB Peak or better Birch Plywood or better construction etc

complete with installation as per the site requirement etc all completeNo. 8.00 77,146.00 617168.00


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

713.00 SITC of Control room/Green Room/VIP Lounge Speaker Compact 4" Coaxial Surface Mount Loudspeaker with RMS power handling capacity of 40 W ,70 V/100V: 30 W / 15 W,

4/8 Ohms, 90 degree or better Horizontal, 60 degree or better vertical dispersion ,Frequency Range 70 Hz - 18 kHz,Sensitivity 84 dB,Maximum Peak SPL 103 dB or better etc all

complete with mounting accessories etc all completeNo. 12.00 10,238.00 122856.00

714.00 SITC of Compact Full Range 4" Low Profile Two-Way Ceiling Speaker 4" LF, 0.75" HF or better Ceiling Speaker with 70 V/100V : 15 W / 7.5 W / 3.75 W ,Sensitivity 86 dB or

better, 90 degrees or better conical Coverage, Maximum SPL 109 dB Peak complete with Steel backcan with mounting accessories etc all complete No. 88.00 9,664.00 850432.00

715.00 SITC of 2-Channel 2400 W power amplifier Class D/TD with Integrated DSP 1200 W @ 4 Ohms or better,600 W @ 8 Ohms,THD + N 20 Hz- 20 kHz for 1 W <0.2%, Signal-to-

Noise ratio >102 dBA, Frequency Response 10 Hz- 25 kHz, Built-in DSP & LAN Port , AES inputs, Link outputs etc complete with installation as per the site requirement etc all

complete No. 16.00 1,33,996.00 2143936.00

716.00 SITC of 2-Channel 1200 W Class D / TD power amplifier with Integrated DSP delivering 300 W @ 8 Ohms and 600 W @ 4 phms, THD + N 20 Hz- 20 kHz for 1 W <0.01%,Signal-

to-Noise ratio >102 dBA, Frequency Response 10 Hz- 25 kHz, Built-in DSP & LAN Port, AES inputs, Link outputs etc complete with installation as per the site requirement

No. 6.00 97,172.00 583032.00

717.00 SITC of 4-Channel 1000W Class D/TD Power Amplifier delivering 2 x 250 W per channel at 2/4/8ohms and 70 V, THD 20 Hz - 20 kHz at 1W <0.1%,Signal to Noise Ratio >108

dBA,Frequency Response 20 Hz - 20 kHz, etc complete with installation as per the site requirementNo. 2.00 78,920.00 157840.00

718.00 SITC of 2-Channel Class D/TD Power Amplifier delivering 60W output power into 8,4,Signal-to-Noise Ratio >90 dBA,Frequency Respose 15Hz - 22 kHz etc all complete with

installation as per the site requirementNo. 4.00 36,480.00 145920.00

719.00 SITC of 2-Channel Class D/TD Power Amplifier delivering 30W output power into 8,4 Ohms with Signal-to-Noise Ratio >92 dBA,Frequency Respose 15Hz - 22 kHz,Imput

impedance 10 kOhm,CMR 40 dB etc all complete with installation as per the site requirementNo. 2.00 27,280.00 54560.00

720.00 SITC of Mixing Console:- 40 channel 48KHz Digital Mixing Console with 32 mic inputs, 24 bus, 16 Aux outs. Main LCR out and Matrix outputs, Built in Stage Box Interface, 192

kHz, 24 bit ADC and DAC converters with minimum 112 dB dynamic range, minimum 24 motorised 100 mm faders, Optional wireless remote control for iPhone* and iPad* etc. 32

x 32 channel USB 2.0 audio interface, 8 DCA and 6 mute groups, Built in effect processor, Complete with Built in aur external 100-Band RTA for all Channel/Bus EQ 's, Auto-

ranging universal switch-mode power supply, Digital mixer should be supplied with 32 inputs and 16 output stage Box from same manufacture of Digital Mixer etc all complete with

installation as per the site requirementNo. 2.00 4,25,011.00 850022.00

721.00 Supply, Installation, Testing & Commissioning of Digital Audio Processor with 8 AEC Mic Input, 2 Mic / Line Input, 6 Line Output, Multichannel USB Interface, GPIO Port, Delay,

Limiter, Feedback Supressor, Equalization audio setting parameters, LAN Control complete with Wall panel control with 4 selectable zones/source and volume controletc complete

with installation as per site requirement.

Make : Klarkteknik / Biamp / Clearone No. 4.00 1,40,000.00 560000.00

722.00 Supply, Installation, Testing & Commissioning of 12-Input Mic/Line Rack Mixer with 8 microphone preamplifier,4 additional balanced line inputs,2 Aux,FX processor with 50 presets

,+48 V phantom power,2-band EQs,separate Control Room, Phones and stereo CD/tape outputs etc all complete as per site requirement Make: Music Group/ Yamaha / Harman

No. 4.00 23,696.00 94784.00

723.00 SITC of Digital Conference System: Central Unit , Control Min 100 microphone units, 8 microphone units can be turned on simultaneously, Control and configuration of the

microphone units, Automatic audio channel allocation of the microphone units, system can be integrated into tele and video conferences, RS 232 interface, Different operating

modes Manual, Voice Activation, Override and Push-To-Talk, Balaned and Unbalanced Audio outputs etc. all complete.No. 6.00 1,95,929.00 1175574.00

724.00 SITC of Digital Conference System: Chairman Microphone Unit, with gooseneck microphone, Min 500 mm length Condenser gooseneck microphone (cardioid), Clear, & Function

buttons, Voice-controlled activation, Integrated loudspeaker, Decreased loudspeaker volume when microphone is switched on, Headphone output, Configurable function button,

Clear button to clear/deactiveate all active delegate microphone units, Microphone button to turn the microphone on or off with all required accessories etc. all complete.

No. 8.00 60,800.00 486400.00

725.00 SITC of Digital Conference System: Deligate Microphone Unit, with gooseneck microphone, Min 500 mm length Condenser gooseneck microphone (cardioid), Voice-controlled

activation, Integrated loudspeaker, Decreased loudspeaker volume when microphone is switched on, Headphone output, Microphone button to turn the microphone on or off all

required accessories etc. all completeNo. 66.00 60,000.00 3960000.00

726.00 SITC of Digital Conference System: Connecting cable, RJ45 / Multicore connectors, length 2,5m all required accessories etc. all complete No. 66.00 1,250.00 82500.00

727.00 SITC of Digital Conference System: Connecting cable, RJ45 / Multicore connectors, length 20m all required accessories etc. all complete No. 12.00 6,500.00 78000.00

728.00 Supply, Installation, Testing & Commissioning of wireless handheld microphone with True diversity receiver (UHF),16 selectable frequencies per band, Display on Transmitter and

Receiver , RF Power output 50mW or Better , Polar Pattern :- Cardiod , Carrier frequency range 500Mhz to 865Mhz , Frequency response 20Hz to 20Khz , Mute Button on

Transmitter , Battery Operation time Minimum 8hr , Should have Charging Contact in Transmitter , Receiver dynamic range 100 dB (A-weighted) Or better , switching bandwidth

Minimum 40Mhz Or better etc complete with installation as per site requirement. Make :

Beyerdynamic / Sennehesier/ShureNo. 163.00 35,000.00 5705000.00


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

729.00 Supply, Installation, Testing & Commissioning of wireless Lapel microphone, with True diversity receiver (UHF),16 selectable frequencies per band, Display on Transmitter and

Receiver , RF Power output 50mW or Better , Polar Pattern :- Omnidirectional , Carrier frequency range 500Mhz to 865Mhz , Frequency response 20Hz to 20Khz , Mute Button

on Transmitter , Battery Operation time Minimum 8hr , Should have Charging Contact in Body pack Transmitter . Receiver dynamic range 100 dB (A-weighted) switching bandwidth

Minimum 40Mhz Or better etc complete with installation as per site requirement. Make :


730.00 Supply, Installation, Testing & Commissioning of wireless Headworn microphone with True diversity receiver (UHF),16 selectable frequencies per band, Display on Transmitter and

Receiver , RF Power output 50mW or Better , Polar Pattern :- Omnidirectional, Carrier frequency range 500Mhz to 865Mhz , Frequency response 20Hz to 20Khz , Mute Button on

Transmitter , Battery Operation time Minimum 8hr , Should have Charging Contact in Transmitter .Receiver dynamic range 100 dB (A-weighted) Or better, switching bandwidth

Minimum 40Mhz Or better etc complete with installation as per site requirement. Make : Beyerdynamic / Sennehesier/Shure No. 4.00 44,800.00 179200.00

731.00 Supply, Installation, Testing & Commissioning of Antena Spliiter Active UHF wideband antenna divider Two antenna inputs, divided into Six outputs each with loop-through

connector to connect further splitters in more extensive installations. Optimised for 470 – 850 MHz frequency response etc complete with installation as per site requirement.

Make : Beyerdynamic / Sennehesier/ShureNo. 4.00 64,000.00 256000.00

732.00 Supply, Installation, Testing & Commissioning of UHF transmitting and receiving omnidirectional antenna with interal or external booster amplifer. Compatible with the Antenna

Distribution complete with mounting kit etc complete with installation as per site requirement. Make : Beyerdynamic / Sennehesier/ShureNo. 4.00 32,500.00 130000.00

733.00 Supply, Installation, Testing & Commissioning of Wired Vocal Microphone , Transducer type Dynamic Polar pattern Supercardioid Frequency response: 30 - 18,000 Hz Nominal

impedance 600 Ω Connection 3-pin XLR male etc complete with installation as per site requirement. Make :Beyerdynamic / Sennehesier/Shure No. 8.00 4,200.00 33600.00

734.00 Supply, Installation, Testing & Commissioning of Instrumenet Microphone with high-frequency reproduction Polar Pattern: Cardioid, Frequency response : 50-17,000 Hz Open

circuit voltage : 2.4 mV/Pa, Nominal impedance : 600 Ω, Load impedance : ≥ 2 kΩ, Connection : 3-pin XLR etc. complete with installation as per the site requirement. Make :


735.00 Supply, Installation, Testing & Commissioning of Array Microphone for the Podium Having minimum 4 Nos of Capsule should pick up ateast from 3 feet with Push-To-Talk and

Push-To-Mute functions etc complete with installation as per site requirement. Make :Push-To-Mute functions etc complete with installation as per site requirement. Make :


736.00 Supply, Installation, Testing & Commissioning of Stage Lighting System: COB LED Fixture : Equipped with 4*LED Cold White / Warm White Two In One, Each LED 100 W, Beam

angle 45°,Field angle 90° , Projection can be adjusted from 0-70° as desired, DMX 512 protocol, master/slave, auto, sound active with adjustable sound sensitivity, 6/13 DMX

channel modes etc. all complete.No. 40.00 44,000.00 1760000.00

737.00 Supply, Installation, Testing & Commissioning of Stage Lighting System: COB LED Bar : Euipped with 8 CoB RGBW four in one, Each 40W, Total 320W, Intelligent temperature

self controlling, beam angle 20°,field angle 45°, DMX 512 protocol, master/slave, auto, sound active with adjustable sound sensitivity etc. all complete. No. 12.00 31,500.00 378000.00

738.00 Supply, Installation, Testing & Commissioning of Stage Lighting System: Primary colour soft light,: 55W*4, Total 220W, Voltage:220V / 110V @ 50 / 60 Hz,, Power: 220W , Color

termperature : 3200K / 5400K, Ballasts / lamp etc. all complete.No. 20.00 10,000.00 200000.00

739.00 Supply, Installation, Testing & Commissioning of Stage Lighting System: Parcon Light, CoB LED (Chip on Board), 150W RGB three in one, DMX, Master/Slave, Stand Alone &

Sound Active, Beam angle 40 degrees,field angle 80 degrees, etc. all complete.No. 32.00 15,000.00 480000.00

740.00 Supply, Installation, Testing & Commissioning of Stage Lighting System: Parcon Light, CoB LED (Chip on Board), 200W RGBA four in one, DMX, Master/Slave, Stand Alone &

Sound Active, Beam angle 40 degrees,field angle 80 degrees etc. all complete.No. 32.00 17,080.00 546560.00

741.00 Supply, Installation, Testing & Commissioning of Stage Lighting System: Parcon Light, CoB LED (Chip on Board), RGBW Four in One 250W, DMX, Master/Slave, Stand Alone &

Sound Active, Zooming: 20-70 Degress , etc. all complete.No. 32.00 64,500.00 2064000.00

742.00 Supply, Installation, Testing & Commissioning of Stage Lighting System: LED Moving Head, 7*high MCD Ostar 4 in 1 RGBW LEDs, Total 105W, 4-60 degrees zooming, Color

macros, Automatic pan/tilt repositioning, DMX 512 protocol, master/slave, auto, sound active, 19/43 DMX channel modes, Smooth color mixing etc. all complete.No. 12.00 74,000.00 888000.00

743.00 Supply, Installation, Testing & Commissioning of Stage Lighting System: DMX Controller LED,160 DMX channels; 16 scenes; All can be output simultaneously; 6 chases; All can

be output simultaneously; Each program can be set the freq of running from 1-200, Manual, sound active and auto modes, USB for data backup and system update; RDM to

control the DMX addresses of the fixtures; Sound sensitivity digitally adjustable (0%-100%); Strobe from 1-20 flashes per second etc. all complete.No. 2.00 1,80,000.00 360000.00

744.00 Supply, Installation, Testing & Commissioning of Stage Furnishing System - Main Front Stage Curtain - Made out of velvet with horizontal / vertical sliding arrangement complete

with fixing rails, brackets, sliding arrangement and Motorised operation complete with runners, master runners, pullies, 3mm steel wire rope, one HP motors - 2 Nos., Air bracker

contractors, 2 Nos. micro switches for auto stop, 3 Nos. push buttons for forward, reverse and stop positions, draped to half area when in closed position, minimum overlap at

centre should be 900mm and should be stitched in double gathering with masking frill drop from prosc along with Motorised rail. with electric motor, Gear Box, running on bearings,

switchable mode using Gear Box, railing System, Roller, Bearings, Relay, Limit Switch, Track etc. all complete. No. 2.00 1,51,200.00 302400.00


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

745.00 Supply, Installation, Testing & Commissioning of Stage Furnishing System - Rear Stage Curtain - Made out of Glazzed Cotton / cashmilon with horizontal / vertical sliding

arrangement complete with fixing rails, brackets, sliding arrangement and Motorised operation complete with runners, master runners, pullies, 3mm steel wire rope, one HP motors -

2 Nos., Air bracker contractors, 2 Nos. micro switches for auto stop, 3 Nos. push buttons for forward, reverse and stop positions, draped to half area when in closed position,

minimum overlap at centre should be 900mm and should be stitched in double gathering with masking frill drop from prosc along with Motorised rail. with electric motor, Gear Box,

running on bearings, switchable mode using Gear Box, railing System, Roller, Bearings, Relay, Limit Switch, Track etc. all complete.No. 2.00 1,17,600.00 235200.00

746.00 Supply, Installation, Testing & Commissioning of Stage Furnishing System - Main Side Wings - Made out of Glazzed Cotton / Cashmilon fixed on over head pivot track covered

with Fabric Frame made up of 1"X2" MS Pipe etc. all complete.No. 12.00 25,000.00 300000.00

747.00 Supply, Installation, Testing & Commissioning of Stage Furnishing System - Frills mounted on frill bar made out of double gathering glazzed cotton / casminlon to be fitted above

the stage with 32mm dia GI Pipe to Cover the lights and other other stage ceiling Gadgets etc. all complete.No. 6.00 10,000.00 60000.00

748.00 Supply, Installation, Testing & Commissioning of Stage Furnishing System - Side Ladder in Side Wings for Mounting Light Fixtures. Dimension: 2'x6'. Made up of with 1"x2" MS

Pipe etc. all complete.No. 8.00 8,590.00 68720.00

749.00 Supply, Installation, Testing & Commissioning of Stage Furnishing System - Main Lights Bars (Back, Center and FOH Light Bars) ,made with 48mm GI pipe etc. all complete.

No. 6.00 60,000.00 360000.00

750.00 Supply, Installation, Testing & Commissioning of Stage Furnishing System - Cyclorama Screen with Frame - Made of Matte White / High quality cinematographic material to be

fixed on tubular frame 35mm dia. MS Pipe tied with rope / strings etc. all complete.No. 2.00 68,500.00 137000.00

751.00 SITC of Control Processor, one RS-232/422/485 COM ports, two RS-232 COM ports, Eight IR/serial, eight relay, and eight Versiport I/O ports, Programmable event scheduling

No. 10.00 1,58,800.00 1588000.00

752.00 SITC of 10" widescreen active-matrix color Touch Panel, 1280 x 800 WXGA display resolution, Capacitive touch screen technology, Multi-touch capable, PoE or PoE+ network

powered with Table top kit and power supply No. 10.00 2,12,000.00 2120000.00powered with Table top kit and power supply No. 10.00 2,12,000.00 2120000.00

753.00 SITC of Universal Dimmer, 4 channels of forward or reverse phase dimming, Auto load detection, Override input, 120 to 240 Volt 50/60 Hz operation, Selectable non-dim modeNo. 4.00 78,848.00 315392.00

754.00 SITC of Designer wall-mount keypads, 12 button configurations, Red LED feedback indicators, Integrate with control system setup No. 4.00 20,480.00 81920.00

755.00 SITC of Programmable 8 Port Relay Module & 4 digital / analogue input module 0-24 Volts DC, low-voltage relay, 6 Watts Power @ 12Volts / 240 V, 44k Input Impedence with

cables & connectors as requiredNo. 12.00 26,120.00 313440.00

756.00 SITC of Recording & Streaming Server, 3 DVI-I (Analog & Digital Signals), VGA Loop out, Input format HDMI, DVI, RGBHV, YPbPr, CVBS, Full HD Resolution, H.264 High Profile,

AAC audio encoding, FIle format MP4 / MPEG4, Picture in picture, Picture by picture, Manegement through App, Webpage, dedicated software, Built in approx 1TB storage, with

all mounting Accessories etc. all complete.No. 9.00 3,16,000.00 2844000.00

757.00 SITC of PTZ Camera, HD CMOS type, 20x Optical Zoom, 16x Digital Zoom, Pelco-D / Pelco-P / Visca protocol support, 2-way HD video output, RS232 / RS485 port control, HDMI

/ DVI, HD-SDI, CVBS outputs with all mountung arrangements etc. all complete. No. 32.00 1,51,648.00 4852736.00

758.00 SITC of 2.5 Sqmm x 2 core(12AWG) ATC copper Conductor, Insulated Cores,PVC Sheathed Speaker Cables .(as per actual) Mtrs 23350.00 180.00 4203000.00

759.00 SITC of 4 Sqmm x 2 core(10/12AWG) ATC copper Conductor, Insulated Cores,PVC Sheathed Speaker Cables complete Mtrs 1200.00 290.00 348000.00

760.00 SITC of 22 AWG 2 core ATC Copper Conductor,PVC Insulated, 90% ATC Copper Braid Shielded, PVC Sheathed Microphone Cable complete etc as required. (as per actual) Mtrs 11600.00 190.00 2204000.00

761.00 SITC of Shielded twisted pair CAT6 Cable (STP) complete etc as required. (as per actual) Mtrs 15800.00 120.00 1896000.00

762.00 SITC of 3' High–Speed HDMI Cable with Ethernet, resolution support 4K@60Hz (4:4:4) Mtrs 614.00 4,741.00 2910974.00

763.00 SITC of 35' High–Speed HDMI Cable with Ethernet, resolution support 4K@60Hz (4:2:0) Mtrs 42.00 6,530.00 274260.00

764.00 SITC of 50' High–Speed HDMI Cable with Ethernet, resolution support 1080p Mtrs 322.00 14,120.00 4546640.00

765.00 SITC of 3' 15–pin HD & 3.5mm Stereo Audio Cable Mtrs 350.00 3,712.00 1299200.00



768.00 Supply, Installation, Testing & Commissioning of Stage Box for microphone connectivity complete with 3 x XLR Connector single complete etc as required No. 16.00 1,650.00 26400.00

769.00 Supply, Installation, Testing & Commissioning of Stage Box for Monitor connectivity complete with 2 x XLR Connector single complete etc as required No. 16.00 1,650.00 26400.00

770.00 Supply, Installation, Testing & Commissioning of Floor stand for microphone No. 12.00 2,250.00 27000.00

771.00 Supply, Installation, Testing & Commissioning of Desktop stand for microphone No. 12.00 2,250.00 27000.00

772.00 SITC of Sound Reinforcement System-Various Connectors For Above Mentioned Configuration etc. all complete. No. 115.00 16,400.00 1886000.00


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

773.00 SITC of Rack Structure 12 U Air Cooled AV Equipment Rack with 4 Nos. of Vertical Power Strips, Cantilever Selves, Cable routing perforations, 4 No. of Spin Wheels etc. all

complete. No. 103.00 14,800.00 1524400.00

774.00 SITC of Rack Structure 20 U Air Cooled AV Equipment Rack with Two Nos. of Vertical Power Strips, Cantilever Selves, Cable routing perforations, 4 No. of Spin Wheels etc. all

complete.No. 4.00 25,000.00 100000.00

775.00 SITC of Rack Structure 42 U Air Cooled AV Equipment Rack with Two Nos. of Vertical Power Strips, Cantilever Selves, Cable routing perforations, 4 No. of Spin Wheels etc. all

complete.No. 8.00 48,000.00 384000.00

Sub Head XIX:: Integrated MARC System

776.00 Supply, Installation, Testing & Commissioning of IP CCTV Camera : IP DOME (Indoor): 2 Megapixel or more sensor based WDR 1080p, 2.8/4/6/8 mm Remote focus lens,30 fps,

Megapixel H.264/MJPEG Day/Night Camera, 1920x1080, motorized IR cut filter, Compact, 12VDC/24VAC/PoE;IP66;IK 10 Housing with integrated IR solution should have UL, CE

& FCC Certified etc. all complete.Each 282.00 55,000.00 15510000.00

777.00 Supply, Installation, Testing & Commissioning of IP CCTV Camera: IP BULLET :2 Megapixel or more1080p ,1920x1080, 30 fps, WDR, IR LED Array, Day/Night, 3-8mm Remote

Focus, Remote Zoom Lens, IP66, 12VDC/24VAC/PoE, PoE Powered Fant should have UL, CE & FCC Certified etc. all complete.Each 49.00 75,000.00 3675000.00

778.00 Supply, Installation, Testing & Commissioning of IP CCTV Camera :Panaromic Camera 12 Megapixel WDR & Day/Night H.264/MJPEG Omni-Directional Camera, 4 x 2048x1536,

4 x 2.8mm MP Lens, Surface mount, Indoor/Outdoor, IP66, IK-10, PoE Powered Fan should have UL, CE & FCC Certified etc. all complete.Each 4.00 1,45,000.00 580000.00

779.00 Supply, Installation, Testing & Commissioning of VMS which includes: (incl. Web Client), Alarm Management, Advanced Reporting, System Partitioning, Zone Monitoring, IO

Modules Support, Email Support, Support for server virtualization, all supported languages. Must include access control, video acess based on policies, and LPR content (option

documented seperately) also includes: Archiving support, Media Router, Audio, Remote Camera Sequences, Camera Blocking, Camera Dewarping, Time Zone, Edge recording,

trickling and archive transfer, Keyboard and Joystick Support etc. all complete.Each 16.00 18,76,000.00 30016000.00

trickling and archive transfer, Keyboard and Joystick Support etc. all complete.Each 16.00 18,76,000.00 30016000.00

780.00 Supply, Installation, Testing & Commissioning of VMS Camera License for cameras etc. all complete. Each 295.00 12,000.00 3540000.00

781.00 Supply, Installation, Testing & Commissioning of Control Room Equipments: Server Quad Core Intel® Xeon® E5 Octa Core, 2.66 GHz, 16 GB of RAM, 1 TB of SATA II hard disk

for OS & Application (dedicated drive), Microsoft® Windows Server® 2012 OS,2 HDMI port, 1 VGA port, 1 RJ45 10/100/1000 Mbps port, Mouse & Keyboard etc. all complete.

include suitable Console etc. all complete.Each 12.00 1,72,000.00 2064000.00

782.00 Supply, Installation, Testing & Commissioning of Storage Servers (with 30 days recording & RAID 5) etc. all complete. Each 8.00 45,20,000.00 36160000.00

783.00 Supply, Installation, Testing & Commissioning of Display Workstation with Windows OS with Intel Processor (work station grade) and 1TB Hard Disk, 8GB Ram, 4GB Graphics

Card, CD/DVD writer, with 2 HDMI port, 1 VGA port, 1 RJ45 10/100/1000 Mbps port, Mouse & Keyboard etc. all complete.Each 120.00 65,000.00 7800000.00

784.00 Supply, Installation, Testing & Commissioning of Video Wall Display : Professional grade, high-definition, 55" ultra-narrow bezel 1.7mm combined bezel to bezel LCD flat-panel for

display walls, Brightness 500 nits (cd/m2), Contrast 4000:1 (full field), Resolution 1920 x 1080, Backlight Direct-lit LED Display orientation Portrait and landscapeetc etc. all

complete. Each 12.00 5,20,000.00 6240000.00

785.00 Supply, Installation, Testing & Commissioning of Video Wall Display Mount :Video Wall specialist wall mount for Video wall configuration as per the clinet requirement etc. all

complete.Each 1.00 84,000.00 84000.00

786.00 Supply, Installation, Testing & Commissioning of 7.0 Mtrs G.I. Octagonal Pole (70 mm A/F (Top) x 130 mm A/F (Bottom) x 5 mm thick with base plate of 250 x 250 x 16 mm, 4 nos.

600 mm long M20 foundation bolts & hardwares (suitable reinforcements to be inserted in the foundation and 40mm x 2 nos. GI pipes for In/Out of main cables) Any other

accessories etc. required complete in all respect as per direction of Engineer in charge. The pole shall also be provided with recessed lockable GI junction box of suitable size and

flush door at the bottom with proper strengthening for the cutout of the door opening of junction box. The cost of RCC foundation shall be paid separately, with accessories etc. all

complete. Each 12.00 12,000.00 144000.00

787.00 Supply, Installation, Testing & Commissioning of Visitor Management System with USB Camera interface and Visitor Pass Generation (Desktop Application) with ORACLE DB.

Standard e-Visitor Management Application (Web based Application). with Label Printer, USB Camera Email notification to the concern person as visitor is arrived at reception

desk.Visitor history report , visitor tracking report, fully integrated with access control system etc. all complete.Each 1.00 2,80,000.00 280000.00

788.00 Supply, Installation, Testing & Commissioning of Access IP Controller, 2 Door/2 Redaer UL certified controller , POE enabled, battery charging over POE, Dual eathernet port for

redundancy Operating temperature 0 to 70 deg C. 50000 users 50000 transactions & upgradable 16 inputs & 16 outputs fully programable & supervised. 7 Ah battery for backup

etc. all complete. Each 13.00 52,000.00 676000.00

789.00 Supply, Installation, Testing & Commissioning of Smart Card Reader with PIN- Operating Frequency 13.56 Mhz, IP67 rated, Keypad for PIN Operating temperature - 40 to 65 deg

C, Tri cpolor LED indication, Beep Buzzer, Metal Mounting compatiable.CE,FCC,Ctick etc. all complete. Each 26.00 18,000.00 468000.00


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

790.00 Supply, Installation, Testing & Commissioning of Biometric Fingerprint Reader -UL certified sensor, Enclosure, Wires cable, CE, FCC ,EN approvals. Finger & Smart card

Operations, IP65 rated unit weatherproof, Operating temperature 0 to 55 deg C, 500 DPI optical sensors, Tmeplates management through single software, Temper switch inbuilt

etc. all complete. Each 69.00 57,600.00 3974400.00

791.00 Supply, Installation, Testing & Commissioning of Contact less Mifare card - 13.56 Mhz, NXP chip certified etc. all complete. Each 500.00 59.50 29750.00

792.00 Supply, Installation, Testing & Commissioning of Electrical Lock with override manual key for Access Control Systems- UL certified lock, 600 LBS Single leaf. etc. all complete.

Each 26.00 12,000.00 312000.00

793.00 Supply, Installation, Testing & Commissioning of Magnetic contact for windows monitoring etc. all complete. Each 26.00 2,000.00 52000.00

794.00 Supply, Installation, Testing & Commissioning of Glass Break Unit etc. all complete. Each 26.00 2,000.00 52000.00

795.00 Supply, Installation, Testing & Commissioning of Bracket etc. all complete. Each 26.00 1,900.00 49400.00

796.00 Supply, Installation, Testing & Commissioning of Exit Puss Button etc. all complete. Each 26.00 1,275.00 33150.00

797.00 Supply, Installation, Testing & Commissioning of Client PC as per specification etc. all complete. Each 1.00 65,000.00 65000.00

798.00 Supply, Installation, Testing & Commissioning of Access Control System: Handheld Metal Detector 3 ways Push button Operation can detect all metals, both ferrous & non-ferrous

standard 9v battery light weight 260g Dimension: 410 x 140 mm with safety Standard EU directives CE Certification etc. all complete.Each 8.00 12,000.00 96000.00

799.00 Supply, Installation, Testing & Commissioning of Access Control System: Letter bomb Detector should detects all kind of metal and alloys, and even very small components of

improvised bombs or incendiary devices with Alarm ready as audio and optic alarm. etc. all complete.Each 1.00 17,000.00 17000.00

800.00 Supply, Installation, Testing & Commissioning of 4 core 1 Sqmm Copper Flexible (2-conductor), 20 to 22 AWG etc. all complete. Mtr 5657.49 55.25 312576.00


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

FIRE FIGHTING

AUDITORIUM

B)Hydrant System

801.00 Supplying, installing, testing and commissioning of MS. Pipes confirming to IS 1239 Pt - I Heavy grade with painting, suitable type of supports ( Shall be fabricated by M.S.

Channel / Angle / Flat for above 50 mm dia), anchor fasteners, bolts nuts, clamps, "U" bolts, fittings such as Reducers,Tees, elbows, flanges. Including cutting, Welding, fixing in /

on walls, ceiling by using suitable supports etc, The quoted rate shall also include for chasing / chipping walls, and making them good with filler material and finished in cement

morter etc. complete.

801.01 150mm nominal dia Mtr 15.00 3797.2 56958.00


801.03 80mm nominal dia Mtr 92.00 1804 165968.00



802.00 Supply, installation, testing & commissioning of C.I butterfly valves of PN 16 rating and ISI marked with tamper switch and accessories like flanges, nut, bolts etc Complete as per

technical specification & drawing details.

802.01 100mm nominal dia Nos. 23.00 6457 148511.00

802.02 80mm nominal dia Nos. 78.00 5208.5 406263.00

803.00 Supplying, installing, testing and commissioning of C.I. Non-return valves as per IS:5312( PN 16) swing check type with required flanges, nuts, bolts and gaskets etc. complete.

803.01 100 mm nominal dia Nos. 10.00 13369.40 133694.00

804.00 Supplying, installing, testing and commissioning of yard hydrant comprising of the following,804.00 Supplying, installing, testing and commissioning of yard hydrant comprising of the following,

804.01 Single headed hydrant valve as per IS 5290, made of gunmetal with 63 mm dia instantaneous out & 80 mm dia fanged inlet inlet,Blank cap , chain and hand wheel etc complete.

Nos. 78.00 9232.30 720119.00

805.00 Supplying, installing, testing and commissioning of S.S. orifice plate of 6 mm thk. For single hydrant Nos. 42.00 5307.50 222915.00

806.00 Supply, erection, testing & commissioning of G.M. Branch pipe with nozzles Nos. 61.00 2960.10 180566.00

807.00 Supply, erection, testing & commissioning of 63 MM x 15 Mtrs. Long RRL hose pipe complete with pair of GM couplings. Nos. 122.00 7205.00 879010.00

808.00 Supply, erection, of Fire duct Shutter fabricated out of M.S.sheet and frame, door shall be 1200mm x 2000 mm min. & fixed with 4 mm thick Glass, suitable Rubber beedibg and

Locking arrangement. Quoted rate shall be includes all fasteners etc, and complete shutter shall be powder coated of approved colour both inside and out side. Nos. 61.00 12237.50 746488.00

809.00 Supply, erection, testing & commissioning of Hose reel drum of swinging type with 20 mm dia PVC braided hose of 36.5M. length with Gate valve (on upstream) and Shut off

nozzle, complete.Nos. 61.00 9636.00 587796.00

810.00 Supply, erection, testing & commissioning of Gun metal Air Purge Valve with ball valve & other accessories

810.01 25 mm dia BSP male threaded Nos. 21.00 3262.60 68515.00

811.00 Supplying, installing and commissioning Portable Fire extinguishers of following type & capacity.

811.01 Carbon-dioxide type fire extinguisher of 4.5 kgs. Capacity, CO2 gas filled in brand new seamless cylinder with powder coated finish, made out of Manganese steel, with wheel

type valve, discharge nozzle, bend & horn, wall mounting bracket etc. complete, confirming to IS: 15683. Nos. 61.00 7590.00 462990.00

811.02 ABC powder type fire extinguisher of 6 Kgs. Capacity, with initial filling in brand new cylinder with powder coated finish, fitted with Gun metal union, high pressure CO2 gas

cartridge, discharge hose, floor trolley type / wall mounting bracket etc. complete, confirming to IS:15683. Nos. 61.00 8827.50 538478.00


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

D Sprinkler System

812.00 Supplying, installing, testing and commissioning of M.S. Pipes confirming to IS 1239 Pt - I Heavy grade with painting, suitable type of supports ( Shall be fabricated by M.S.




812.01 150 mm dia Rmt. 44.00 3795.00 166980.00

812.02 100 mm dia Rmt. 40.00 2536.60 101464.00

812.03 80 mm dia Rmt. 108.00 1804.00 194832.00

812.04 65 mm dia Rmt. 64.00 1459.70 93421.00

812.05 50 mm dia Rmt. 83.00 1161.60 96413.00

812.06 40 mm dia Rmt. 165.00 848.10 139937.00

812.07 32 mm dia Rmt. 9.00 726.00 6534.00

812.08 25 mm dia Rmt. 432.00 576.40 249005.00



813.01 150 mm dia Nos. 1.00 22220.00 22220.00

814.00 Supplying, installing, testing and commissioning of hydraulically operated Sprinkler control valve, with water motor gong bell, test trims,wet trim kit complete with stop valve,

pressure gauges, drain valves, ball valves, check valves, strainers etc. confirming to latest IS Code complete. (shall be procured after due approval from EIC)814.01 150 mm dia Nos. 2.00 85910.00 171820.00

815.00 Supplying, installing, testing and commissioning flow switch on sprinkler distribution header on each floor and shall be connected to fire alarm panel through cable. Cable shall be

measured separately Flow switch.

815.01 150 mm dia Nos. 1.00 8855.00 8855.00

816.00 Supplying, installing, testing and commissioning Quick Response Sprinkler quartzoid bulb type with screwed end connection Sprinklers with Chrome finished.

816.01 15 mm dia - Rating 57°C ( Pendent Type ) K-80 Nos. 246.00 484.00 119064.00

816.02 Upright sprinkler, K-80 Nos. 157.00 528.00 82896.00

817.00 Supply, erection, testing & commissioning of S.S Flexible Pipes for Sprinkler Connection

817.01 1500 mm long Nos. 100.00 2530.00 253000.00

817.02 1000 mm long Nos. 146.00 2123.00 309958.00

817.03 750 mm long Nos.

818.00 Supplying, installing, testing and commissioning of 25mm dia Inspection and Testing assembly with GM sight glass, GM isolation, by pass valves and connected to drain line

complete ( excluding the cost of drain pipe)Nos 6.00 23100.00 138600.00

818.01 Gun metal Air Purge Valve with ball valve & other accessories

818.02 25 mm dia BSP male threaded Nos. 1.00 3242.80 3243.00

A)Pump House Equipment

819.00 Supply, installation, testing & commissioning of Electric Main Hydrant Pump capable to deliver 2280 LPM at 70 m head. The pump shall have a fire pump controller for starting and

monitoring fire pump set The controller should monitor, display and record fire pump set information, they should be built to meet the requirements of the approving authority.

Complete set shall be mounted on a common base frame and as per technical specification.Set 1.00 477950.00 477950.00

820.00 Supply, installation, testing & commissioning of Electric Main Sprinkler Pump capable to deliver 2280 LPM at 70 m head. The pump shall have a fire pump controller for starting

and monitoring fire pump set The controller should monitor, display and record fire pump set information, they should be built to meet the requirements of the approving authority.

Complete set shall be mounted on a common base frame. as per technical specification.Set. 1.00 477950.00 477950.00


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

821.00 Supply, installation, testing & commissioning of Diesel Pump capable to deliver 2280 LPM at 70 m head. The pump shall have a fire pump controller for starting and monitoring fire

pump set The controller should monitor, display and record fire pump set information, they should be built to meet the requirements of the approving authority. The diesel pump

shall have flow meter, gear operated butterfly valve of PN -16 rating, pressure relief valve and waste cone.Complete set shall be mounted on a common base frame and as per

technical specification.Set 1.00 802450.00 802450.00

822.00 Supply, installation, testing & commissioning of Jockey Pump capable to deliver 180 LPM at 70 m head. The pump shall have a fire pump controller for starting and monitoring fire

pump set The controller should monitor, display and record fire pump set information, they should be built to meet the requirements of the approving authority. Complete set shall

be mounted on a common base frame. and as per technical specification.Sets 2.00 118800.00 237600.00

823.00 Supply, erection, testing & commissioning of electrical motor driven pump of capable to deliver 900 LPM at 35MWC.The pump shall be coupled to TEFC motor of suitable HP with

speed of 2900 RPM and complete set shall mounted on common base frame. The quoted rate shall includes providing matching flanges, founadtion, Foundation bolts etc. along

with control Panel Set 1.00 149600.00 149600.00

824.00 Supply, erection, testing & commissioning of electrical motor driven pump of capable to deliver 450 LPM at 35MWC.The pump shall be coupled to TEFC motor of suitable HP with

speed of 2900 RPM and complete set shall mounted on common base frame. The quoted rate shall includes providing matching flanges, founadtion, Foundation bolts etc. along

with control PanelSet 1.00 139700.00 139700.00

825.00 Supply, erection, testing & commissioning of Pressure switches of diaphram operated, IP66, suitable range (20 kg/cm² to 5 kg/cm²) for pump sets with Ball valves, Fittings like

unions / collars / reducers etc. Nos. 4.00 3465.00 13860.00

826.00 Supply, installation, testing and commissioning of Pressure Gauge with cock & accessories for pumps.The Gauges with cock shall be constructed of die cast aluminium & stove

enameled. The Gauge shall be of stainless steel bourden type. Complete as per technical specification & drawing details. enameled. The Gauge shall be of stainless steel bourden type. Complete as per technical specification & drawing details. Nos. 4.00 1265.00 5060.00

827.00 Supply, erection, testing & commissioning of emergency Start / Stop Push Button station weather proof type for Booster pump at terrace level. Set 1.00 6600.00 6600.00

CABLE TRAY

828.00 Supplying and fixing of perforated G.I.sheet cable tray with neccessory angle iron suspension supports, anchor fasteners etc. complete. Maximum height of suspension shall not

exceed 500 mm.Size of the tray shall be 40x 300 x 40mm.mtr 100.00 1213.30 121330.00

829.00 G.I. Earthing strips of 50mm x 6mm thick, strip shall be run on floor / ceiling / walls, from the equipment to the nearest Earth pit with neccessory accessories as required. ( Earth pit

shall be executed by other agencies).mtr 200.00 78.10 15620.00

830.00 Supplying, installing, testing and commissioning of M.S. Pipes confirming to IS 3589,6mm thick, with painting, suitable type of supports, anchor fasteners, bolts nuts ( Galvanized),

clamps, "U" bolts, fittings such as Reducers,Tees, elbows, flanges. Including cutting, Welding, fixing in / on walls, ceiling by using suitable supports etc. The quoted rate shall also

include for chasing / chipping walls, floor and making them good with filler material and finished in cement morter etc. complete.830.01 200mm nominal dia mtr 17.00 6164.40 104795.00

831.00 Supplying, installing, testing and commissioning of MS. Pipes confirming to IS 1239 Pt - I Heavy grade with painting, suitable type of supports ( Shall be fabricated by M.S.




831.01 150mm nominal dia mtr 35.00 3797.20 132902.00





S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.








833.00 Supplying, installing, testing and commissioning of Gun metal chrome finished Ball valves with fittings of screwed end type.

833.01 15mm dia. Nos. 7.00 1135.2 7946.00

834.00 Supplying, installing and commissioning C.I.flanged "Y" type Strainer with SS mesh,suitable flanges, nuts, bolts, gaskets etc. complete.

834.01 250mm dia. Nos. 1.00 63518.4 63518.00

835.00 Supply, installation, testing & commissioning of C.I Non Return Valves with end flanges, nut, bolts and accessories complete. C.I Non Return Valves. Complete as per technical

specification & drawing details..





836.00 1100 V GRADE POWER / CONTROL CABLES

Supplying, laying, testing & commissioning of XLPE,PVC outer sheathe, steel armoured, copper conductor, 1100v grade power cables with glands etc.The cables shall be laid in Supplying, laying, testing & commissioning of XLPE,PVC outer sheathe, steel armoured, copper conductor, 1100v grade power cables with glands etc.The cables shall be laid in

tray. as required..The size of the cables shall as mentioned below,

836.01 3.5C x 50 sq.mm copper for main pumps mtr 70.00 2753.3 192731.00

836.02 3 C x 6 Sqmm. Copper Jockey and Booster pumps mtr 100.00 374 37400.00

836.03 2 C x 1.5 Sqmm copper armoured for Instrumentation mtr 100.00 148.5 14850.00

836.04 3 C x 1.5 Sqmm copper armoured For start / stop push buttons mtr 20.00 173.8 3476.00

837.00 Providing, fixing, testing and commissioning of double flanged vertical air vessel fabricated from 10mm MS plate with dished ends,dia of 450 mm and height 2000 mm with suitable

supporting legs, outside painted with one coat of primer and two coats of synthetic enamel paint of approved shade, complete with one 25mm dia connection from pump delivery,

one 25 mm drain with valve, gunmetal water level gauge, one pressure gauge ( 0-20 kg/sq cm) and 25 mm sockets for pressure switches and all other required accessories.The air

vessel shall be tested to 1.5 times of working pressure. Complete as per technical specification & drawing details. Set 1.00 62702.2 62702.00

B)Hydrant System

838.00 Supplying, installing, testing and commissioning of buried MS. Pipes confirming to IS 1239 Pt - I Heavy grade with suitable type of supports, fittings such as Reducers,Tees,

elbows, flanges. Including cutting, Welding as per drawings. The rate quoted should e included with anti corrosive treatment with 4 mm thick polymer corrosion resistant tape,

primer as per IS 10221, overlap shall be 15mm minimum.







839.02 100mm nominal dia Nos. 10.00 6457 64570.00


840.00 Supplying, installing, testing and commissioning of C.I. Non-return valves as per IS:5312( PN 16) swing check type with required flanges, nuts, bolts and gaskets etc. complete.



S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

841.00 Supplying, installing, testing and commissioning of yard hydrant comprising of the following,

841.01 Single headed hydrant valve as per IS 5290, made of gunmetal with 63 mm dia instantaneous out & 80 mm dia fanged inlet inlet,Blank cap , chain and hand wheel etc complete.

Nos. 43.00 9232.3 396989.00

842.00 Supply, erection, testing & commissioning of G.M. Branch pipe with nozzles Nos. 43.00 2960.1 127284.00

843.00 Supply, erection, testing & commissioning of 63 MM x 15 Mtrs. Long RRL hose pipe complete with pair of GM couplings. Nos. 86.00 7205 619630.00

844.00 Supply, erection of M.S. Hose cabinet (Weather Proof)stand mounted type fabricated out of M.S. sheet of 16 swg. with glass fronted ( 4mm thick glass with rubber beeding) door

and size of the cabinet shall be 750mm x 600 mm x 300 mm Quoted rate shall be includes suitable all fasteners etc, and cabinet shall be powder coated of approved colour both

inside and out side. Nos. 43.00 7480 321640.00

C)Fire Brigade Inlet

845.00 Supplying, installing and commissioning of fire brigade inlet connection of 4 way with 4 nos. 63 mm dia. built - in Gun metal Non- return valves instantaneous coupling type

arranged on 150 mm dia. Pipe manifold and connected to wet riser main. Qouted rate shall be included with C.I. Butterfly valve, C.I. Non-return valve and M.S. cabinet of suitable

size with mounting supports etc. complete.(Drawing to be approved by EIC prior to execution of Works) Set 1.00 42293.9 42294.00

846.00 Supply, erection, testing & commissioning of 150 dia. two way fire brigade connection with 63 MM dia instantaneous inlet. (For fire tank filling) Set 1.00 42309.3 42309.00

D)Supplying, installing and commissioning Portable Fire extinguishers of following type & capacity.

847.00 Fire buckets round bottom type enamel painted, white inside & Red out side and Letter "FIRE" in black out side and handle with mounting bracket. sets 5.00 5527.5 27638.00

HVAC VRV/VRF SYSTEMHVAC VRV/VRF SYSTEM

Part-A Air Conditioning System

SUB HEAD-I: VARIABLE REFRIGERANT VOLUME / VARIABLE REFRIGERANT FLOW AC SYSTEM

848.00 Supply, installation, testing & commissioning of Air cooled VRV/ VRF Modular type Air Conditioning system of high C.O.P., complete with indoor and outdoor units duly charged

with refrigerant R-410A and oil (first charge) suitable for cooling and heating (reverse cycle) with individual controller, (suitable for 415±10% for outdoor and 230±5% for indoor

units) and complete with all accessories, fittings etc as per specifications and as required at site.

(The equipment shall be in line with the specifications)

A)Outdoor Units

Complete with twin rotary/scroll compressor and drive arrangment initial charge of refrigerant (R-41OA) & oil, refrigerant piping, drier, sight glass, dual pressure cutout all housed

and supported properly in cabinet, air cooled condeser & its controller as per specification and as required at site of following capacities.

i)For Ground Floor

848.01 21 TR Nos. 6.00 661537.8 3969227.00

848.02 24 TR Nos. 3.00 767712.00 2303136.00

848.03 22 TR Nos. 1.00 723435.90 723436.00

848.04 20TR Nos.

ii)For First Floor

848.05 21 TR Nos. 3.00 661537.8 1984613.00

848.06 26 TR Nos. 2.00 865089.50 1730179.00

848.07 20 TR Nos. 4.00 661537.8 2646151.00

848.08 25 TR Nos. 3.00 814203.5 2442611.00

iii)For Second Floor

848.09 21 TR Nos. 1.00 661537.8 661538.00

848.10 28 TR Nos. 1.00 926985.4 926985.00

848.11 20 TR Nos. 5.00 661537.8 3307689.00

848.12 25 TR Nos. 6.00 814203.5 4885221.00


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

iv)For Third Floor

848.13 21 TR Nos. 1.00 661537.8 661538.00

B)Indoor Units

849.00 Supply, installation, testing & commissioning of indoor units consisting of 3/4 row deep DX coil, drain pan, filter, blower section and drive arrangment, initial charge of refrigerant &

oil, integral refrigerant, piping, electronic expansion valve, electrical panel with controls, duly wired, thermostatic control corded / cordless remote controller, supports for indoor

units etc alongwith flexible duct connection pieces as required at site and as per specifications.

Ceiling Suspended Cassette Units (Alongwith 1.5m flexible duct with each cassette)

A)Ground Floor

849.01 1000 CFM / 3.0 TR Nos. 4.00 61072 244288.00

849.02 750 CFM / 2.5 TR Nos. 34.00 61072 2076448.00

849.03 700 CFM / 2.0 TR Nos. 10.00 57343 573430.00

849.04 650 CFM / 2.0 TR Nos. 16.00 57343 917488.00

849.05 600 CFM / 1.75 TR Nos. 8.00 56485 451880.00

849.06 550 CFM / 1.5 TR Nos. 4.00 55253 221012.00

849.07 500 CFM / 1.5 TR Nos. 16.00 55253 884048.00

849.08 450 CFM / 1.35 TR Nos. 16.00 55253 884048.00

849.09 400 CFM / 1.25TR Nos. 12.00 55253 663036.00

First Floor

849.10 1050 CFM / 3.2 TR 3.00 61072.00 183216.00

849.11 1000 CFM / 3.0 TR Nos. 15.00 61072.00 916080.00849.11 1000 CFM / 3.0 TR Nos. 15.00 61072.00 916080.00

849.12 850 CFM / 2.5 TR Nos. 9.00 57343.00 516087.00

849.13 800 CFM / 2.5 TR Nos. 9.00 57343 516087.00

849.14 750 CFM / 2.25 TR Nos. 36.00 57343 2064348.00

849.15 700 CFM / 2.0 TR Nos. 7.00 57343 401401.00

849.16 650 CFM / 2.0 TR Nos. 36.00 57343 2064348.00

849.17 600 CFM / 1.75 TR Nos. 12.00 56485 677820.00

849.18 500 CFM / 1.5 TR Nos. 27.00 55253 1491831.00

849.19 450 CFM / 1.35 TR Nos. 8.00 55253 442024.00

849.20 Second Floor

849.21 1050 CFM / 3.2 TR Nos. 6.00 61072.00 366432.00

849.22 1000 CFM / 3.0 TR Nos. 17.00 61072 1038224.00

849.23 850 CFM / 2.5 TR Nos. 5.00 57343 286715.00

849.24 800 CFM / 2.5 TR Nos. 6.00 57343 344058.00

849.25 750 CFM / 2.5 TR Nos. 16.00 57343 917488.00

849.26 700 CFM / 2.0 TR Nos. 8.00 57343 458744.00

849.27 650 CFM / 2.0 TR Nos. 15.00 57343 860145.00

849.28 600 CFM / 1.75 TR Nos. 24.00 56485 1355640.00

849.29 550 CFM / 1.5 TR Nos. 2.00 55253 110506.00

849.30 500 CFM / 1.5 TR Nos. 30.00 55253 1657590.00

849.31 450 CFM / 1.35 TR Nos. 21.00 55253 1160313.00

849.32 400 CFM / 1.25 TR Nos. 55253

849.33 Third Floor

849.34 750 CFM / 2.25 TR Nos. 8.00 57343 458744.00

849.35 500 CFM / 1.5 TR Nos. 2.00 55253 110506.00


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

Note :-

A)The Outdoor units TR (Actual) mentioned in item No.1A is be as per total indoor Actual TR. The vendor can offer the outdoor units in HP as per availability from the

manufacturer, however considering the diversity of 75% of the indoor TR as suitable to actual Refrigerant TR.

B)The in door units CFM / TR capacity can be also as per availability from the manufacturer.

C)The number, capacity, location and CFM of the indoor units shall be as suitable and coordinated with the Reflected Ceiling Plan.

D)Above points no.1, 2 & 3 shall be accepted subject to approval by Client / consultant

850.00 Supply and installation of imported Refrigerant Y joints Lot 1.00 947232 947232.00

851.00 Supply & Installation of interconnecting copper tube refrigerant piping of various sizes (6.4mm dia to 41.3 mm dia) and as required and as suitable to the individual indoor units,

duly insulated with 13/19 mm thick tubular type closed cell / cross linked elastomeric nitrile rubber / polyethylene foam as per specifications in between each set of indoor and

outdoor units inclusive of refrigerant as required duly fixed, mounted & supported properly with suitable size of clamp MS hanger, tray etc as required at site and as per

specifications. Lot 1.00 1158300 1158300.00





specifications. Lot 1.00 975220.4 975220.00




outdoor units inclusive of refrigerant as required duly fixed, mounted & supported properly with suitable size of clamp MS hanger, tray etc as required at site and as peroutdoor units inclusive of refrigerant as required duly fixed, mounted & supported properly with suitable size of clamp MS hanger, tray etc as required at site and as per







857.01 The dia and length of regriferant piping may vary as per manufacturer standard and as per route / length feasible and as required at site.

857.02 The insulation thickness upto 19.1mm dia pipe shall be 13 mm and above 19.1mm dia, the insulation thickness shall be 19mm

857.03 The vendor shall furnish the rate chart, size and length of refrigerant piping alongwith the Technical Bid.

857.04 The length of refrigerant piping shall be as per route/length feasible and as required at site.

4.00 DRAIN PIPING

858.00 Providing and fixing of Rigid uPVC / polypropylene (PPR) piping complete with fittings, supports as per specifications and duly insulated with 6mm thick closed cell / cross linked

/Elastomeric nitrile rubber / polyethylene foam insulation etc complete as per specification and as reqwuired at site.

858.01 25mm Rmt. 283.00 398.2 112691.00

858.02 19mm Rmt. 333.00 352 117216.00

Note :-

The route & termination of drain point shall be as per feasibility and availability at site.

SUB HEAD-II : AIR DISTRIBUTION & INSULATION

859.00 Supply, installation, testing and commissioning of inline fans with prefilter for fresh air intake & propeller fan for exhuast complete with motor suitable for 220 volts 50 Hz, single

phase AC supply with supporting arrangement etc. as required at site and as per specifications and providing and applying using gun applied transparent silicon sealant at roof

level for making exhaust fan openings air and water light complete as required.


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

a)Inline fans with flexible connection & Prefilter

859.01 2500 CFM Set 2.00 47053.6 94107.00

859.02 1250 CFM Set 2.00 41971.6 83943.00

859.03 800 CFM Set 5.00 29572.4 147862.00

859.04 650 CFM Set 4.00 22374 89496.00

859.05 600 CFM Set 6.00 22374 134244.00

859.06 500 CFM Set 9.00 22374 201366.00

859.07 400 CFM Set 5.00 20405 102025.00

859.08 300 CFM Set 8.00 20405 163240.00

859.09 200 CFM Set 1.00 20405 20405.00

859.10 1350 CFM Set 3.00 41971.6 125915.00

859.11 1100 CFM Set 1.00 41971.6 41972.00

859.12 900 CFM Set 29572.4

859.13 750 CFM Set 1.00 29572.4 29572.00

859.14 650 CFM Set 1.00 22374 22374.00

SUB HEAD-III - ELECTRICAL WORK

ELECTRICAL WORK (for VRV/VRF System)

860.00 Supply, installation, testing and commissioning of Control cum transmission wiring of 2 core x 1.5 sqmm copper in suitable PVC conduits between indoor and outdoor unit &

outdoor units to central remotes controllers, copper armoured cabling alongwith double earthing of suitable sizes in between the outdoor unit and Isolator switch and in between

other equipments and the isolator switch and Isolator switch of suitable size in weatherproof enclosure conforming to IP55 (to be located in the vicinity of outdoor unit and other

equipments for isolation).

The capacity and number of the electrical switchgears, isolators, cables etc. shall be as per suitablity of outdoor units (1 no 28 TR & 9 no. 21 TR) having capacity in HP and

configuration as per availability of the manufacturer alongwith suitable electrical distribution panel for above.Lot 1.00 396000 396000.00

configuration as per availability of the manufacturer alongwith suitable electrical distribution panel for above.Lot 1.00 396000 396000.00

(Note :- The size of Isolator shall vary as per vendor's requirement based on configuration of the outdoor units).






The capacity and number of the electrical switchgear, isolators, cables etc. shall be as per suitability of outdoor units (2 no each of 20 TR, 26 TR & 25 TR) / (1 no. 22 TR & 6 nos.,

25 TR) having capacity in HP and configuration as per availability of the manufacturer alongwith suitables electriclal distribution panel for above.Lot 2.00 277200.00 554400.00







The capacity and number of the electrical switchgears, isolators, cables etc. shall be as per suitablity of outdoor units (3 no 24 TR & 9 no. 20 TR) having capacity in HP and

configuration as per availability of the manufacturer alongwith suitable electrical distribution panel for above.

Lot 1.00 475200 475200.00



S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

External HVAC (CENTRAL AC PLANT FOR FOUR BUILDING AUDI,SPORTS,ADMIN, & CENTRAL LIBERARY)

WATER COOLED SCREW CHILLERS

863.00 Supply, installation, testing and commissioning of EUROVENT/AHRI certified Water cooled Screw Chiller of 275 TR (Actual) capacity completed with semi hermetically sealed

single/multiple twin rotor type screw compressors with single/multiple independent refrigerant circuits, shell and tube type condenser and shell and tube flooded type evaporator

with nitrile rubber insulation. All mounted on frame as per specifications, motor shall be of high efficiency suitable for 400+ 10% volts, 50Hz, 3 phase AC supply, microprocessor

based control panel, BMS connectivity provision, including oil separators, pressure relief devices, filter drier moisture indicators and complete operating factory charge of both

refrigerant R-134a & compressor oil, control safeties and diagnostics display, refrigerant piping, mounting base frame etc. complete as per the specifications and as per following

parameters :-

Operation Parameters:

863.01 Chilled water temperature In - 12.2 C

863.02 Chilled water temperature Out - 6.7 C

863.03 Evaporating Fouling Factor - 0.0005 FPS

863.04 Condenser water temperature In - 32.20C

863.05 Condenser water temperature Out - 36.40C

863.06 Condenser Fouling Factor - 0.001 Sqft/Hr.DegF/BTU

863.07 Evaporator Fouling Factor - 0.0005 Sqft/Hr.DegF/BTU

863.08 IKW/TR shall not exceed 0.70 at above design conditions. Nos. 3.00 5551769.3 16655308.00

COP at AHRI should not be less than 5.4 as per ECBC 2017

864.00 Supply, installation, testing & commissioning of Vertical Inline/ Horizontal Split case condenser water centrifugal pump sets with bronze/brass impeller for condenser water

recirculation complete with IE2 TEFC Sq. Cage induction motor with class "F" insulation, base plate, vibration isolators, mechanical seal etc. conforming to technical specification

and as per following parameters.

864.01 Water flow rate of each Pump - 4180 LPM

864.02 Pump Head - 21 Mtrs. Nos. 3.00 516010 1548030.00

864.03 Suggested Pump Motor - 30 HP

865.00 Supply, installation, testing and commissioning of Vertical Inline/ Horizontal Split case primary chilled water centrifugal pump sets with bronze/brass impeller for chilled water

recirculation complete with IE2 TEFC Sq. Cage induction motor with class "F" insulation, base plate, vibration isolators, mechanical seal etc. conforming to technical specification

and as per following parameters.




Secondary Chilled Water Pumps & Variable Speed Pumping system.

866.00 Supply, installation, testing and commissioning of secondary Inline/ Horizontal Split case variable speed pumping system consisting of adjustable frequency drive (AFD) for each

pump 1 No. Microprocessor based pump controller housed within the enclosure of one of the AFD with pumping software duty down loaded single / multiple differential pressure

sensor / transmitter as per the site requirement. (The entire system alongwith secondary pumps must be sourced from single manufacturer only for unit responsibility).

The motor shall be I E2.

The chilled water pumps shall include thermal insulation and cladding.

The system shall be complete in all respects and suitable for following ratings:

(a)Zone-I (Auditorium)




(b)Zone-II (Admin Block)



866.06 Suggested Pump Motor - 7.5 HP


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

(c)Zone-III (Sports Complex)




(d)Zone-IV (Central Library)




Combined Air and Dirt Separators

867.00 Supply, Installation, testing and commissioning of a combined Air and Dirt Separators as per Specifications on the return water line located at the pump suction or a suitable

location in AC Plant Room as suggested and suitable for 5010 LPM water flow. Separator should be capable of removing all micro bubbles and should have a steel tube & copper

wire media to carry out its operation. It should be able to remove upto 10 microns of dirt particles. The separator should be complete with high capacity air vent, service valve, non

return valve, butterfly valve connection for makeup water inlet, flanges, drain valve etc. Set 1.00 1064360 1064360.00

868.00 Supply, installation, testing and commissioning of FRP induced draft Cooling Tower of 325TR capacity complete with FRP water basin, PVC fillings, statically and dynamically

balanced fan, Two speed TEFC motor, suction screen, make up & quick fill arrangement, over flow & drain connection, suitable steel ladder etc. and conforming to standard

specification.

868.01 Inlet Water Temperature - 36.4 Deg.C

868.02 Outlet Water Temperature - 32.2 Deg.C Nos. 2.00 643500 1287000.00868.02 Outlet Water Temperature - 32.2 Deg.C Nos. 2.00 643500 1287000.00

Online Scale Preventer

869.00 Supply, installation, testing and commissioning of Online Scale Preventer suitable for water flow rate of 4180 LPM as per specification. Nos. 3.00 454520 1363560.00

Split Type AC Units

870.00 Supply, installation, testing & commissioning of H-wall type Split cooled AC units consisting outdoor units, indoor units as detailed below, complete with standard factory supplied

power & control panels with corded remote control, interconnecting copper refrigerant piping (upto 6 meters) insulated with insulation tubing as required, interconnecting power and

control cabling, all mounted on mild steel powder coated ladder type trays neatly clamped to wall / slab, as per specifications.

870.01 Hi-wall type AC unit (2TR) Set 6.00 70466 422796.00

870.02 Cassette type Indoor unit (2TR) Set 4.00 101123 404492.00

SUB-HEAD II : AIR CIRCULATION SYSTEM

Floor Mounted AHU

871.00 Supply, installation, testing and commissioning of factory fabricated Floor mounted Double Skinned Chilled Water Air-handling units, vertical type, fabricated out of extruded

aluminium section with 0.6mm precoated Galvanised steel sheet outside and 0.6 mm plain Galvanised steel sheet inside with 23mm thick 38 Kg/Cu.M density PU foam insulation

complete with blower, blower section and blower motor TEFC type suitable for operation on 415 volts + 10%, 50 Hz + 5% AC supply, 4 Row cooling coil made of Aluminium finned

Copper tube with coil section, pre-filter section with non woven synthetic media of 10 micron particle size with an efficiency of 90% polished stainless steel drain pan made out of

22G SS sheet duly insulated complete with motor and belt drive package etc. The motor & blower assembly shall be mounted on Aluminium extruded section only. The complete

AHU shall conform to specifications with static pressure of 40mm.

The face velocity across cooling coil shall be limited to 152 MPM maximum.

Central Library No. 1.00 391791.4 391791.00

871.01 20500 CFM / 45.5 TR No. 1.00 365750 365750.00

871.02 17500 CFM / 38 TR No. 1.00 296257.5 296258.00

871.03 15500 CFM / 36.5 TR


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

CEILING SUSPENDED AHU

872.00 Supply, installation, testing and commissioning of factory fabricated ceiling suspended Double Skinned Chilled Water Air-handling units & (low height, having twin blowers

horizontal type), fabricated out of extruded aluminium section with 0.6mm precoated Galvanised steel sheet outside and 0.6 mm plain Galvanised steel sheet inside with 23mm

thick 38 Kg/Cu.M density PU foam insulation complete with blower, blower section and blower motor TEFC type with VFD suitable for operation on 415 volts + 10%, 50 Hz + 5%

AC supply, 4 Row cooling coil made of Aluminium finned Copper tube with coil section, pre-filter section with non woven synthetic media of 10 micron particle size with an efficiency

of 90% polished stainless steel drain pan made out of 22G SS sheet duly insulated complete with motor and belt drive package etc. The motor & blower assembly shall be

mounted on Aluminium extruded section only. The complete AHU shall conform to specifications with static pressure of 25-30 mm.

The face velocity across cooling coil shall be limited to 152 MPM maximum.

A)Auditorium

872.01 4000 CFM / 10 TR No. 1.00 93924.6 93925.00

872.02 3700 CFM / 10 TR Nos. 4.00 90120.8 360483.00

872.03 3000 CFM / 8.5 TR Nos. 4.00 79440.9 317764.00

872.04 2300 CFM / 6.5 TR No. 1.00 68468.4 68468.00

BSports Complex

872.05 5800 CFM / 10 TR Nos. 4.00 134303.4 537214.00

Floor Mounted Air Handling Unit Cum TFA Unit with Energy Recovery Wheel

873.00 Supply, Installation, Testing and commissioning of Air Handling Unit Cum TFA Unit with Energy Recovery Wheel, floor mounted, double skin construction with both inner & outer

sheets 0.8mm thick, thermal break, insulated with 23mm thick PUF insulation of density 38kg/cu.mt PUF insulation. The unit should be draw through type complete with prefilters,

Mixing box, chilled water section with 6 row deep Cooling coil, two nos. (1 for Recirculation & 1 for Fresh air intake), Backward curved fans, stainless steel drain pan & fan motors

with VFD. The chilled water coil shall be selected for a maximum face velocity of 500 FPM complete as required at site and as per specifications. Heat recovery unit shall be

designed for ambient temperature of DBT 110 Deg F & WBT 75 Deg F for Summer & DBT 95 Deg F & WBT 83 Deg F for Monsoon. The return air temperature of air stream will bedesigned for ambient temperature of DBT 110 Deg F & WBT 75 Deg F for Summer & DBT 95 Deg F & WBT 83 Deg F for Monsoon. The return air temperature of air stream will be

DBT 77 Deg F & RH 55%. The Heat Recovery wheel must have equal efficiencies both sensible & Latent greater than 75%. The desiccant of the wheel shall be Molecular Sieve 3

Angstrom to avoid any sort of cross contamination between the two air streams.

The TFA unit shall conform to EN1886 for tightness class B & filter leakage class F8.

The complete unit (Casing and Heat Recovery Wheel) shall be manufactured by the same manufacturers.

a)Auditorium

873.01 Operation Parameters

873.02 Supply Air Quantity : 17500 CFM

873.03 Recirculated Air Quantity :- 12500 CFM

873.04 Treated Fresh Air Quantity:-5000 CFM

873.05 Exhaust air quantity : 2500 CFM

873.06 Cooling Capacity : 68 TR Sets 2.00 2464000 4928000.00

TREATED FRESH AIR UNITS

874.00 Supply, installation, testing and commissioning f factory fabricated ceiling suspended Double Skinned Chilled Water Treated Fresh Air-handling unit horizontal type fabricated out of

extruded aluminium section having thermal break with 0.6mm precoated Glavanised steel sheet outside and 0.6 mm plain Galvanised steel sheet inside with 23 mm thick 38

Kg/Cu.M density PU foam insulation complete with blower, suitable for 40 mm static pressure blower section and blower motor I E 2 TEFC type suitable for operation on 415 volts

+ 10%, 50 Hz + 5% AC Supply, 8 Row cooling coil made of Aluminium finned Copper tube with coil section, fresh air intake section pre-filter section with non woven synthetic

media of 10 micron particle size with an efficiency of 90%, polished stainless steel drain pan made out of 22G SS sheet duly insulated complete with motor and belt drive package

etc. The motor & blower assembly shall be mounted on Aluminium extruded section only. The complete TFA shall conform to specifications.

SPORTS COMPLEX

874.01 3100 CFM / 19.5 TR No. 1.00 121136.4 121136.00

ADMIN BUILDING

874.02 2200 CFM / 14 TR No. 1.00 100069.2 100069.00

874.03 1250 CFM / 7.9 TR No. 1.00 70077.7 70078.00

874.04 1000 CFM / 6.25TR No. 1.00 62616.4 62616.00

874.05 2300 CFM / 14.5 TR No. 1.00 101678.5 101679.00

874.06 1500 CFM / 9.5 TR No. 1.00 74174.1 74174.00

874.07 1200 CFM / 7.5 TR No. 1.00 69199.9 69200.00


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

AHU CONTROLS

875.00 Set of controls comprising of thermostat and electronic proportioning thermostat with digital display having sensors with probe, cabling, interlocking etc. Sets 26.00 13200 343200.00

FAN COIL UNITS

876.00 Supply, installation, testing and commissioning of factory fabricated fan coil units complete with fan, fan motor, cooling coil, filter, ball valve with filter at inlet and ball valve at outlet,

copper connecting 2 way motorized valve, thermostats, 3 speed selector switch complete with control wiring as required at site and as per specification.A)Auditorium

876.01 2.5 TR Nos. 2.00 23115.4 46231.00

876.02 1.0 TR No. 2.00 15361.5 30723.00

HYDRONIC CASSETTE UNITS

877.00 Supply, installation, testing and commissioning of Ceiling Suspended Cassette type decorative indoor unit complete with chilled water copper tube, aluminium finned coil, Fan with

four directional flow, quiet high efficiency centrifugal fan, easily cleanable synthetic filter, inbuilt high lift water pump for pump out of drain pan, ball valve with filter at inlet and ball

valve without filter at outlet, 2 way valve with actuator, and cordless remote for the operation of the fan, complete as required at site and as per specifications. Grill to be integral

part of the unit. The unit shall have provision for the fresh air intake. The unit shall be suitable for operation on Single phase 230 volts 50 Hz power supply. The capacity of the

Hydronic Cassette unit shall be as per following :-

SPORTS COMPLEX

877.01 3.0TR/ 1200 CFM No. 1.00 55740.3 55740.00

877.02 2.0TR/ 800 CFM Nos. 14.00 52375.4 733256.00

877.03 1.7TR/ 600 CFM Nos. 3.00 52375.4 157126.00

877.04 1.2TR/ 500 CFM No. 1.00 51351.3 51351.00

ADMIN BUILDING ADMIN BUILDING

877.05 2.25TR/ 1050 CFM No. 13.00 54423.6 707507.00

877.06 2.0TR/ 850 CFM Nos. 30.00 52375.4 1571262.00

877.07 1.75TR/ 700 CFM Nos. 37.00 52375.4 1937890.00

877.08 1.5TR/ 600 CFM Nos. 40.00 51351.3 2054052.00

877.09 1.25TR/ 500 CFM Nos. 30.00 51351.3 1540539.00

PHOTO HYDRO IONIZATION (PHI) CELLS

878.00 Supply, installation, testing and commissioning of Photo Hydro Ionization (PHI) Cells complete as required suitably designed as per application area and as per specification for the

AHUs of following capacities.

878.01 20500 CFM Set 1.00 148500 148500.00

878.02 17500 CFM Set 3.00 148500 445500.00

878.03 13500 CFM Set 1.00 134200 134200.00

878.04 5800 CFM Set 4.00 115500 462000.00

878.05 4000 CFM Set 1.00 115500 115500.00

878.06 3700 CFM Set 4.00 94160 376640.00

878.07 3100 CFM Set 1.00 94160 94160.00

878.08 3000 CFM Set 4.00 94160 376640.00

878.09 2300 CFM Set 2.00 60500 121000.00

878.10 2200 CFM Set 1.00 60500 60500.00

SUB-HEAD III: PIPING WORK

INSULATED CHILLED WATER PIPING (Expanded Polystyrene Insulation)

879.00 Supplying, laying/fixing, testing and commissioning of following nominal sizes of chilled water piping plumbing inside the building (with necessary clamps, vibration isolators and

fittings but excluding valves, strainers, gauges etc.) duly insulated with fire retardant quality expanded polystyrene moulded pipe section of density 20 kg/cu.m after a thick coat of

cold setting adhesive (CPRX compound) wrapping with 500g polythene faced hessain and finally applying 0.63mm aluminium sheet cladding complete with type, grade 1 roofing

feltstrip (as per IS:1322 as amended upto date) at joints repairing of damage to building etc. as per specifications and as required complete in all respect.

Note :- 1) The Pipes of sizes 150mm & below shall be M.S. 'C' class as per IS : 1239 and pipes size above 150mm shall be welded black steel pipe heavy class as per IS : 3589,

from minimum 6.35mm thick M.S. Sheet for pipes upto 350 mm dia and from minimum 7mm thick MS sheet for pipes of 400 mm dia and above.

2) The buried pipe shall have sand cement plaster and tarfelt as per specifications in place of Aluminium sheet cladding.


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

879.01 250mm dia (75mm insulation) RM 71.00 4923 349533.00











879.12 200mm dia (75mm insulation) Buried pipe RM 30.00 4120 123600.00




880.00 Supply, Installation, insulation of P.I.D valves, with actuator connecting pipe dia as per specifications and as required at site.

Connecting pipe dia

880.01 100 mm dia Nos. 2.00 139827.6 279655.00

880.02 80 mm dia Nos. 3.00 109635.9 328908.00

880.03 50 mm dia Nos. 3.00 61329.4 183988.00

880.04 40 mm dia Nos. 18.00 50562.6 910127.00

881.00 Providing and fixing in position the industrial type pressure gauge complete with valves etc. as required Nos. 40.00 973 38920.00

882.00 Providing & fixing in position the mercury in glass industrial type thermometer complete as required Nos. 16.00 707 11312.00

883.00 Manual Air Vent (G.M Globe Valve) 40mm dia Nos. 26.00 6906.9 179579.00

884.00 Auto Air Vent - 25mm dia Nos. 21.00 4269.1 89651.00

Closed Expansion Tank with Degasser

885.00 Supply, installation, testing & commissioning of Non recharged Closed Expansion Tank duly insulated of 1000 litres fabricated steel designed and constructed as per CE Certified/

SME Section-VIII having heavy duty Butyl Rubber Bladder removable type for inspections working pressure 125 PSIG (862KPa) at operating temperature of 50 degree centigrade

complete with twin make-up water pumps including one standby pressure switch, non return valve, pressure gauges & necessary isolating valves. Set 1.00 1320704 1320704.00

INSULATED VALVES

886.00 Supplying, fixing, testing and commissioning of following valves, strainers, gauges in the chilled water plumbing duly insulated to the same specifications as the connected piping

and adequately supported as per specifications. (AS AN ALTERNATE PRE INSULATED BUTTERFLY VALVES, BALANCING VALVES, Y STRAINERS & NON RETURN

VALVE, AS PER SPECIFICATIONS CAN BE USED).886.01 BUTTERFLY VALVE/ BALL VALVE (MANUAL) with C I body SS Disc, Nitrile Rubber Seal & O- Ring PN 16 pressure rating for chilled water/hot water circulation as specified

886.02 250mm dia (Butterfly Valve) Nos. 3.00 28025.8 84077.00

886.03 200mm dia (Butterfly Valve) Nos. 13.00 11102 144326.00








S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

b)BALANCING VALVE WITH BUILT IN MEASURING FACILITY with C I body flanged construction with EPDM coated disc with long pitch with protected out pipe insulation & PN

16 pressure rating for chilled / hot water circulation as specified.

886.10 200mm dia Nos. 4.00 48763 195052.00

886.11 150m dia Nos. 1.00 23798 23798.00

886.12 125m dia Nos. 1.00 18608 18608.00

886.13 100m dia Nos. 1.00 11945 11945.00

c)Y - STRAINER of Ductile CI Body flanged ends with stainless steel strainer for chilled / hot water circulation including insulation as specified.

886.14 200 mm dia Nos. 3.00 20853 62559.00

886.15 150 mm dia Nos. 5.00 10530 52650.00

886.16 125 mm dia Nos. 2.00 9880 19760.00

886.17 100 mm dia Nos. 4.00 6918 27672.00

886.18 80 mm dia Nos. 3.00 5026 15078.00

886.19 50 mm dia Nos. 3.00 3516 10548.00

886.20 40 mm dia Nos. 18.00 2478 44604.00

d)Non-Return valve with dual plate of CI body SS plates vulcanized NB seal flanged end & PN16 pressure rating of Chilled/ Hot Water circulation including insulation as specified.

886.21 200 mm dia Nos. 3.00 9655 28965.00

886.22 150 mm dia Nos. 5.00 6477 32385.00

886.23 125 mm dia Nos. 2.00 5163 10326.00

886.24 100 mm dia Nos. 2.00 3893 7786.00

e)Water Flow Switch for following :-

886.25 200 mm dia Nos. 3.00 1986.6 5960.00

f)Flexible Coupling with anti vaccuum rings with control units, flanges, nuts, bolts etc.

886.26 200 mm dia Nos. 12.00 13750 165000.00

886.27 150 mm dia Nos. 10.00 9912.1 99121.00

886.28 125 mm dia Nos. 4.00 8250 33000.00

886.29 100 mm dia Nos. 4.00 6270 25080.00

887.00 Supplying, fixing, testing and commissioning of following sizes of GI 'B' Class drain piping duly insulated with 25 mm Expanded Polystyrene covered with polythene and aluminium

sheet as per specifications.

887.01 50 mm dia Rmt. 26.00 1331 34606.00

887.02 40 mm dia Rmt. 75.00 1042.8 78210.00

887.03 32 mm dia Rmt. 80.00 908.6 72688.00

887.04 25 mm dia Rmt. 21.00 757.9 15916.00

10. Condenser Water Piping

888.00 Supplying, fixing, testing and commissioning of condenser water pipes of following sizes of MS 'C' class along with necessary clamps, vibration isolators and fittings such as bends,

tees,etc. But excluding valves, strainers, gauges etc. adequately supported on rigid supports duly painted/ buried in ground excavation and refilling etc. as per specification and as

required complete in all respect.

Note :- The Pipes size 150mm & below shall be M.S. 'C' class as per IS : 1239 and pipes size above 150mm shall be welded black steel pipe heavy class as per Is : 3589, from

minimum 6.35mm thick M.S. Sheet for pipes upto 350 mm dia. And from minimum 7 mm thick Ms sheet for pipes of 400 mm dia and above.

888.01 350 mm dia Metre 120.00 5830 699600.00

888.02 250 mm dia Metre 48.00 3524 169152.00

888.03 200 m dia Metre 21.00 2918 61278.00

888.04 150 mm dia Metre 17.00 1983 33711.00

888.05 80 mm dia Metre 17.00 1123.1 19093.00

888.06 65 mm dia Metre 26.00 919.6 23910.00


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

889.00 Supply, fixing, testing and commissioning of following valves, gauges and strainers for condenser water circulation as per specifications ;-

BUTTERFLY VALVE (MANUAL) with CI body SS discs nitrile sheet & O-ring & PNM 16 pressure rating as specified.

889.01 350 mm dia Nos. 3.00 32560 97680.00

889.02 250 mm dia Nos. 14.00 26382.4 369354.00

889.03 200 mm dia Each 2.00 10261 20522.00

889.04 150 mm dia Nos. 2.00 5914 11828.00

889.05 65 mm dia Each 4.00 2971 11884.00

(B)Balancing Valve

889.06 250 mm dia Nos. 5.00 64386.3 321932.00

(C )Pot Strainer

889.07 350 mm dia Nos. 1.00 52196.1 52196.00

(D)Non-Return Valve with dual plate of CI Body SS plater, vulcanized NB seal flanged end & PN 16 presure rating of chilled water circulation including insulation as specified.

889.08 250 mm dia Nos. 3.00 12760 38280.00

(E)Water Flow Switch for following pipes :-

889.09 250 mm dia Nos. 3.00 1986.6 5960.00

(F)Flexible coupling with anti vaccum rings complete with control units, flanges, nuts, bolts, seal etc.

889.10 250 mm dia Nos. 12.00 15180 182160.00

890.00 Providing and fixing in position the following :-890.00 Providing and fixing in position the following :-

890.01 Pressure gauges complete with valve etc. Nos. 12.00 973 11676.00

890.02 Mercury in glass Industrial type thermometer Nos. 6.00 707 4242.00

890.03 Manual air vent (GM globe valve) 40mm dia Nos. 6.00 6906.9 41441.00

890.04 Auto air vent (GM globe valve) 25mm dia Nos. 6.00 4269.1 25615.00

891.00 Supply, installation, testing and commissioning of GI 'B' class drain piping complete with fittings as per specifications.

891.01 50mm dia Rmt. 66.00 1078 71148.00

SUB-HEAD IV : AIR DISTRIBUTION SYSTEM

DUCTING, GRILLS, DIFFUSER AND INSULATION

892.00 Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter

dampers, vanes, supports etc. duly hanged/ suspended by steel wire ropes as per approved drawings and specifications of following sheet thickness complete as required.

892.01 Thickness 0.63 mm sheet Sqm. 4030.00 739 2978170.00




893.00 Supplying & fixing of powder coated extruded aluminium Supply Air Grills with louvers and control damper as per specifications. Sqm. 8.00 7132 57056.00

894.00 Supplying & fixing of powder coated extruded aluminium Return Air Grills with louvers but without volume control damper complete as required. Sqm. 30.00 4065 121950.00

895.00 Supplying, fixing, testing & commissioning of supply air diffusers of powder coated aluminium with aluminium volume control dampers with anti smudge ring & removable cored. Sqm. 35.00 8686 304010.00

896.00 Supply, fixing, testing and commissioning of Return air diffuser of powder coated aluminium without aluminium volume control dampers with anti smudge ring & removable cored. Sqm. 8.00 5619 44952.00

897.00 Supply, installation, testing and commissioning of Linear Diffusers with damper. Sqm. 8.00 16775 134200.00


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

898.00 Supply, installation, testing and commissioning of Linear Diffusers without damper. Sqm. 8.00 13475 107800.00

899.00 Supply, installation and testing of powder coated Aluminium extruded jet diffusers in the rotatable and reversible core fixed in aluminium anodized plat ef (595x595) mm of following

sizes. 899.01 Jet diffusers of 380 mm dia with rotatable and reversible core Nos. 16.00 1518 24288.00

899.02 Jet diffusers of 315 mm dia with rotatable and reversible core Nos. 20.00 1072.5 21450.00

900.00 Supplying, Fixing, testing and commissioning of fire dampers in supply air duct/ main branch and return air path as and where required of required sizes i/c control wiring, the

damper shall be motorized and spring return so as to close the damper in the event of power failure automatically and open the same in case of power being restored. The spring

return action shall be inbuilt mechanism and not externally mounted. The damper shall also be closed in the event of fire signal complete as required and as per specification.

900.01 Fire Damper Sqm. 21.00 6308 132468.00

900.02 Actuator Sqm. 26.00 5483 142558.00

901.00 Supply, installation, testing and commissioning of GI volume control damper complete with neoprene rubber gaskets, nuts, bolts, screws linkages, flanges etc. as per

specifications. Sqm. 8.00 5463 43704.00

902.00 Supply & fixing of Fresh/Exhaust Air Intake Aluminium louver with Bird screen & Aluminium VCD. Sqm. 12.00 16775 201300.00

SUB-HEAD V : INSULATION WORK

903.00 Supply and fixing of acoustic lining of supply air duct and plenum with 25 mm thick resin bonded glass wool having density of 32 kg/m³, with 25 mm X 25 mm GI section of 1.25 mm903.00 Supply and fixing of acoustic lining of supply air duct and plenum with 25 mm thick resin bonded glass wool having density of 32 kg/m³, with 25 mm X 25 mm GI section of 1.25 mm

thick, at 600 mm centre to centre covered with Reinforced Plastic tissue paper and 0.5 mm thick perforated aluminum sheet fixed to inside surface of ducts with cadmium plated

nuts, bolts, stick pins, CPRX compound etc. complete as required and as per specifications. Sqm. 170.00 551 93670.00

904.00 Supplying and fixing of following thickness duly laminated aluminum foil of mat finish closed cell Nitrile rubber (class “O”) insulation on existing duct after applying two coats of cold

setting adhesive (CPRX compound). The joints shall sealed with 50 mm wide and 3 mm thick self adhesive nitrile rubber tape insulation complete as per specifications and as

required.

904.01 19mm thick Sqm. 3500.00 821 2873500.00

905.00 Supplying, fixing acoustic lining on wall and ceiling of AHU rooms & AC plant rooms with 50mm thick, density 32kg/cu.m resin boned glass fiber insulation friction fixed in 610mm x

610mm frame work made of 25x50x50x50x25mm made of of 0.6mm thick GI sheet U shaped channel and covered with reinforced fiber glass tissue and finished with 0.80 mm

perforated aluminium sheet etc. complete as required and as per specifications. Sqm. 1250.00 870 1087500.00

SUB-HEAD VI : VENTILATION

906.00 Supply, installation, testing and commissioning of propeller fans and inline fans for exhaust complete with motor suitable for 220 volts 50 Hz, single phase AC supply with

supporting arrangement etc. as required at site and as per specifications.

a)Inline Fans with flexible connection

906.01 2000 CFM Sqm. 2.00 27830 55660.00

906.02 1500 CFM Sqm. 1.00 26070 26070.00

906.03 1400 CFM Sqm. 1.00 26070 26070.00

906.04 1300 CFM Sqm. 1.00 26070 26070.00

906.05 1200 CFM Sqm. 4.00 23925 95700.00

906.06 900 CFM Sqm. 2.00 22000 44000.00


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

b)Propeller Fans with Gravity Louvers

906.07 600 CFM Sqm. 3.00 17710 53130.00

906.08 450 CFM Sqm. 6.00 13750 82500.00

906.09 300 CFM Sqm. 39.00 8250 321750.00

906.10 225 CFM Sqm. 134.00 4400 589600.00

906.11 200 CFM Sqm. 33.00 4400 145200.00

Note: The provision of the fixing of Inline fan and propeller fan alongwith connection piece and sealing of all the joints to ensure there is no ingress of water inside shall be in the

scope of HVAC contractor. Hence this item shall become part of above item no. 2(a) and (b).

907.00 Supply and installation of Exhaust Valves 1590 mm dia alongwith flexible duct connection piece. Sqm. 260.00 1155 300300.00

SUB-HEAD VII : ELECTRICAL WORK

908.00 Supply, installation, testing and commissioning of cubical type, extendeble on both side, indoor type main MV panel board suitable for 3 phase, 4 wire 415 V, 50 Hz and of 31 MVA

rupturing capacity at 415 volts, fabricated from minimum 2mm thick CRCA sheet steel powder coated through 7 tank process facility for prickling and degreasing complete with

following mountings, interconnections etc as required.

908.01 Main Electrical panel board in plant room fabricated from 2mm thick CRCA sheet, baseframe of 3.0mm thick & duly powder coated complete with aluminium bus bar, digital type

voltmeter & ammeters, indicating lights, selector switch, door interlock & de-interlock system with pad lock, incoming outgoing feeders, starters with required fault level as per site

requirement, fuses, single phase prevention, C.T.s, contactors for remote control operations, internal wiring, interlocking between feeders as per system requirement with 4NO & 4

NC auxiliary contacts as spare as per specifications & SLD. & Local/Remote selector switches and internal wiring shall be included in the panel complete as per specification.

(MAIN HVAC PANEL)(MAIN HVAC PANEL)

a)Incomer - 1 Nos. Shall be equiped & each comprising of:-

908.02 1 No 1600A, FP, 50KA, drawout type electrically operated air circuit breaker with 230V A.C spring charged motor with microprocessor based release having O/L,S/C & E/F

protection with 6NO + 6NC aux contacts compatible with RS-485 Port.

908.03 1 Set Phase indication light LED type with protection fuse

908.04 1 Set Digital Ammeter with selector switch of suitable range with three nos of CTs

908.05 1 No. Digital Voltmeter 0-500V with selector switch & protection fuse

908.06 1 No. Digital KWH Meter with RS-485 communication port

b)Bus Bars

908.07 1 Set of 2000 A alluminium bus bars 3 Phase & Neutral. (Neutral 50% of phase)

c)Outgoings:

908.08 3 Nos 197KW Chiller feeder (2Working + 1Stand by) & each comprising of :-

908.09 1 No. 630 Amps TPN, 35KA, MCCB with micro-processor based release having O/L,S/C,E/F protection.


908.11 1 Set 'ON/OFF/TRIP' indication light LED type with protection fuse

ii)3 Nos 22KW Condenser Water Pumps feeder (2Working + 1Stand by) & each comprising of :-


908.13 1 Set 'Star/Stop/Reset' push button

908.14 1 No. 22KW automatic Star/Delta Starter with built-in SPP



908.17 1 No. local-remote selector switch.

908.18

908.19 3 Nos 7.5KW Primary Chilled Water Pumps feeder (2Working + 1Stand by) & each comprising of :-

908.20 1 No. 40 Amps TPN, 35KA, MCCB with micro-processor based release having O/L,S/C & E/F protection.


908.22 1 No. 7.5KW automatic Star/Delta Starter with built-in SPP



S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.



iv)2 Nos 7.5KW VFD driven Secondary chilled water pumps feeder for Zone - 1 Auditorium (1Working + 1Stand by) & each comprising of :-



908.28 1 No. 11KW automatic bypass Star/Delta Starter with built-in SPP



908.31 1 No. Auto / Manual selector switch.

908.32 1 No. Ventilation of suitable capacity with thermostat, SP. MCB & fan louvers

908.33 2 No. Control relay with 4-change over contacts for vfd control.

908.34 Lot. Space for mounting of VFD and interconnections.

v)3 Nos 5.5KW VFD driven Secondary chilled water pumps feeder for Zone - 2 Admin Building (2Working + 1Stand by) & each comprising of :-



908.37 1 No. 5.5KW DOL bypass Starter with built-in SPP







vi)2 Nos 7.5KW VFD driven Secondary chilled water pumps feeder for Zone - 3 Sport Complex (1Working + 1Stand by) & each comprising of :-



908.46 1 No. 7.5KW automatic bypass Star/Delta Starter with built-in SPP







vii)2 Nos 11KW VFD driven Secondary chilled water pumps feeder for Zone - 4 Central Library (1Working + 1Stand by) & each comprising of :-



908.55 1 No. 11KW automatic bypass Star/Delta Starter with built-in SPP







viii)4 Nos 18.5KW Cooling Tower feeder (4Working) and each comprising of :-








S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

ix)2 Nos. 100 Amps TPN, 35KA, MCCB with micro-processor based release having O/L,S/C & E/F protection as spare and each comprising of:-


x)2 Nos. 63 Amps TPN, 35KA, MCCB with micro-processor based release having O/L,S/C & E/F protection as spare and each comprising of:-


Panel as described above and in drawings. Set 1.00 240000 240000.00

909.00 Supply, installation, testing and commissioning of cubical type, indoor type local sub panels for AHU & TFA Units suitable for 3 phase, 4 wire 415 V, 50 Hz , fabricated from

minimum 2mm thick CRCA sheet steel powder coated through 7 tank process facility for prickling and degreasing complete with following mountings, interconnections etc as

required.

i)Local Sub Panel for Floor Mounted 7.5KW AHU Motor

909.01 1 No. 16Amps TP MPCB-35KA

909.02 1 set.Phase indicating lights with control fuses.

909.03 1 set. ON/OFF/TRIP indicating lights with control fuse.


909.05 1 No. Digital Ammeter with suitable range of 1no. CT

909.06 1 set. Start/Stop/Reset push button

909.07 1 no.. Local/Remote mode selector switch

909.08 1 no.Suitable rating 24V. Transformer for diverting valve.

909.09 1 No. Control Relay with 4-change over contacts for fire interlock.

Panel as described above and in drawings. Set 3.00 30000 90000.00Panel as described above and in drawings. Set 3.00 30000 90000.00

ii)Local Sub Panel for Ceiling Suspended 2.2KW AHU Motor

909.10 1 No. 6.3Amps TP MPCB-35KA

909.11 1 set. Phase indicating lights with control fuses.


909.13 1 no. 2.2KW DOL Starter with built-in SPP







iii)Local Sub Panel for Ceiling Suspended 1.5KW AHU Motor












S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

iv)Local Sub Panel for Floor Mounted 1.1KW AHU Motor











v)Local Sub Panel for Floor Mounted 0.75KW AHU Motor










Set 7.00 24800 173600.00Panel as described above and in drawings. Set 7.00 24800 173600.00

vi)Local Sub Panel for AHU Cum TFA Unit with ERW

a)Incomer:-

909.46 1 Nos. 100 Amps TPN, 35kA, MCCB with micro-processor based release having O/L,S/C & E/F protection and each comprising of:-


909.48 1 Set Phase indication light LED type with protection fuse

909.49 1 No. Digital Voltmeter 0-500V with selector switch & protection fuse

b)Bus Bars

909.50 1 Set of 150 A aluminum bus bars 3 Phase & Neutral. (Neutral 50% of phase)

c) Outgoings:

1 Nos 15kw TFA AHU (S.Air) fan feeder comprising of :-

909.51 1 No. 32Amps TP MPCB-35KA


909.53 1 No. 15KW automatic Star/Delta Starter with built-in SPP






1 Nos 1.5kw TFA AHU (E.Air) fan feeder comprising of :-



909.61 1 No. 1.5kw DOL Starter with built-in SPP







S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

1no.10Amps.DP MCB for 180watts HRW Motor


910.00 Supply, installation, testing and commissioning of start & stop local control push bottom stations fabricated from 2mm thick powder coated CRCA sheet complete with

interconnection etc including providing & installation of steel bracket of suitable size for mounting on wall/floor. (PUSH BUTTON STATION) Set 4.00 2750 11000.00

911.00 Supply, laying, testing and commissioning of Power cabling XLPE insulated, PVC sheathed, armoured, aluminium conductor of 1.1 KV grade on existing cable trays.

911.01 3.5C x 185 sq.mm (for 197 kw water chilling m/c.) Rmt. 150.00 1008 151200.00

911.02 3C x 10 sq.mm (for 18.5/ 22 kw motor) Rmt. 550.00 271 149050.00

911.03 3C x 6 sq.mm (for 11.9.3 kw. motor) Rmt. 180.00 105 18900.00

911.04 3C x 4 sq.mm (for upto 7.5 kw. Motor) Rmt. 900.00 100 90000.00

912.00 Supply, laying, testing and commissioning of Control cabling (PVC XLPE insulated and PVC sheathed, armoured, copper conductor of 1.1 KV grade on existing cable trays).

912.01 12C x 1.5 sq.mm Rmt. 50.00 264 13200.00

912.02 10C x 1.5 sq.mm Rmt. 50.00 230 11500.00

912.03 6C x 1.5 sq.mm Rmt. 50.00 142 7100.00

912.04 4C x 1.5 sq.mm Rmt. 325.00 105 34125.00

912.05 3C x 1.5 sq.mm Rmt. 320.00 89 28480.00

912.06 2C x 1.5 sq.mm Rmt. 450.00 85 38250.00

913.00 Supplying and making cable end termination complete with brass compression gland, crimping thimbles for PVC sheathed aluminium conductor cable of 1.1 KV grade of the under

noted sizes as required.noted sizes as required.

913.01 3.5C x 185 sq.mm Each 12.00 880 10560.00

913.02 3C x 10 sq.mm Each 28.00 158 4424.00

913.03 3C x 6 sq.mm Each 16.00 165 2640.00

913.04 3C x 4 sq.mm Each 94.00 150 14100.00

914.00 Supplying and making cable end termination complete with brass compression gland, crimping thimbles for PVC sheathed copper conductor cable of 1.1 KV grade of the under

noted sizes as required.

914.01 2C/3C/4C/6C x 1.5 sq.mm Each 130.00 70 9100.00

914.02 10C/12C x 1.5 sq.mm Each 16.00 90 1440.00

915.00 Providing and fixing 6 SWG GI wire on surface or in recess for loop earthing as required alongwith cable as required. Rmt. 450.00 13.65 6143.00

916.00 Providing and fixing 8 SWG GI wire on surface or in recess for loop earthing as required alongwith cable as required. Rmt. 1000.00 9.45 9450.00

917.00 Supply and fixing of perforated of indicated thick CRCA sheet steel cable tray painted of required colour, of following sizes complete with bends/tee joints, coupling plate & nuts

bolts etc. including Supporting structure as per specification complete as required.

917.01 100mm wide & 50mm deep x 1.6mm thickness Rmt. 50.00 186 9300.00

917.02 150mm wide & 50mm deep x 1.6mm thickness Rmt. 100.00 221.55 22155.00

917.03 300mm wide & 62.5mm deep x 2mm thickness Rmt. 50.00 385 19250.00

917.04 600mm wide & 75mm deep x 2mm thickness Rmt. 10.00 715 7150.00

918.00 Earthing with G.I. Earth plate 600mm x 600mm x 6mm thick including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering

pipe etc. including charcoal or coke and salt complete as required conform to IS : 3043. Set 2.00 5500 11000.00

919.00 Providing and fixing following B-class G.I. Pipe

919.01 50mm Rmt. 20.00 330 6600.00

919.02 65mm Rmt. 30.00 437 13110.00


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

920.00 Providing and fixing following G.I. Strip on surface or in recess for connections etc. as required.

920.01 25x5mm strip Rmt. 150.00 88 13200.00

920.02 32x6mm strip Rmt. 225.00 132 29700.00

920.03 50x6mm strip Rmt. 60.00 176 10560.00

921.00 Supplying and placing of non-skid rubber mat 8mm thick and 900mm width as required including cutting to required lengths of approved make with test certificate suitable for LT

panels. Rmt. 8.00 550 4400.00

922.00 Supplying and fixing of shock restoration chart written in English and Hindi duly framed in glass as required. Nos. 1.00 550 550.00

Mechanical workBOREWELL(2 NoS)

923.00 Supply, Installation at site and Testing of Borewell, as detailed below:

923.01 Drilling of Tube well by DTH method using standard Rig having Bore Dia 200 mm.

923.02 a) 0-50 m Metre 100.00 1,115.40 111540.00

923.03 b) 51-100m Metre 100.00 1,115.40 111540.00

923.04 Development to tube well by 600 cfm Air compressor per Borewell. Hour 8.00 710.60 5685.00

923.05 Supplying and fixing heavy duty MS Housing pipe 150 mm dia with fitting with threads. Metre 180.00 1,194.60 215028.00

923.06 Providing and fixing M.S. Well plug and well cap 150mm dia Nos. 2.00 143.00 286.00923.06 Providing and fixing M.S. Well plug and well cap 150mm dia Nos. 2.00 143.00 286.00

923.07 Providing and fixing M.S. Housing clamp heavy duty 150mm dia pipe. Pair 2.00 1,153.57 2307.00

923.08 Supplying installation testing and commissioning of 5 HP Submersible Pump including providing steel rope tied to pump set make Crompton Greaves / KSB of discharge capacity

10000 LPH at 90 M head, with 3 phase, 50 HZ, 400V Motor. Set 2.00 58,841.92 117684.00

923.09 Supply, installation and commissioning 'B' class G.I. Pipes:-

923.10 50mm dia in bore well with pump Metre 180.00 1,587.30 285714.00

923.11 50mm dia but in ground including excavation filling of earth, wrapping and coating for protection Metre 150.00 1,006.50 150975.00

923.12 Submersible cable 1 x 3 x 6.0 mm2, with G.I earthing and weather proof cable joint PVC insulated, PVC sheathed copper cable 3x4mm2 with G.I earthing. Metre 300.00 550.00 165000.00

923.13 In Pump house. 30.00 550.00 16500.00

Total

923.14 Graduated Level controller for Start / Stop of 2 Tubewells Pumps with control wiring between water tank and motor control centre (Height of water column 3m) - COMMON FOR

PUMPING SYSTEM. Job 2.00 16500.00 33000.00

924.00 SEWAGE TREATMENT PLANT

M S Bar Screen:

924.01 Supplying, installing, testing and commissioning of bar screen consisting of 2 Nos. shall be provided infront of the intake works, so as to exclude the large sized particles with

associated set of guide angles in MS flat of 10.0 mm screen kept inclined at 45 degree to the horizontal at 40 mm c/c with one no. handrack in SS/GI. 924.02 Bar rack fabricated from SS - 304 bars to cover the width of the screen chamber with a racking arm for manual operation.

924.03 Size: 12 mm SET 2.00 9,350.00 18700.00

924.04 OIL & GREASE TRAP: JOB 1.00 5,500.00

924.05 MOC Civil Construction

924.06 EQUALIZATION TANK:(Civil Works)


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

924.07 Laundary Effluent Pre-Treatment Tank : 2 Nos. (Civil Works)

Supplying, installing, testing and commissioning of 2 Nos. centrifugal submersible type water pumps (one working + one standby) to pump Laundary waste from Lundary sump to

Laundary effluent pre-treatment tank at uniform flow rate Flow rate - 4 cu.m/hr, Head -12 mtr With neccesary Dosing System - 2 nos.Set 1.00 1,76,000.00 176000.00

924.08 RAW SEWAGE PUMPS:(1 W + 1 S) Nos. 2.00 66,000.00 132000.00

Supplying, installing, testing and commissioning Consisting of 2 Nos. centrifugal submersible type raw sewage water pumps (one working + one standby) with cutter version to

pump sewage from equilisation sump to MBBR/FMR Plant at uniform flow rate Flow rate - 20 cu.m/hr, Head -12 mtr .

A)Dry run protection.

b)1no. pressure gauge 4" dial with valve tee and fittings.

c)2nos. cast iron lever operated slim seal type butterfly valves of CI body and spheroidal graphite iron disc (SG iron),with nitrile rubber seal, tested to 10 kg / sq.cm Confrming to

BS 5155 and including a set of GI flanges as per BS-10 table 1 including bolt nuts, GI washers, and neoprene rubber gaskets Complete etc., on the delivery side.

d)2nos. slimseal flap type check valve with CI body and cast steel disc pressure rating PN-10 Kg / sq.cm including a set of GI flanges as per BS-10 table 1 including bolt nuts, GI

washers, and neoprene rubber gaskets Complete etc., (inter valve / audco make) on the delivery side.

e)GI manifold finished neatly with hot dip galvanizing to 100 microns with flanged end on either sides and collar provision for connectivity of above mentioned valves.

924.09 MBBR MAIN TANK in RCC construction

LAMELLA CLARIFIER in RCC construction. SETS 1.00 1,37,500.00 137500.00

924.10 Lamella Clarifier Mechanism to fit into Clarifier tank which consists of inclined overlapping FRP plates, which will arranged to form a separate sedimentation chamber or the cells

between each pair of adjacent plates. The overlapping additive projected area of several plates will be a factor of increasing surface settling area proportion to the number of plates

used. The inlet flow will divide and enter the tower part of each sedimentation cell from its two opposite sides. As the water will displace upward in smooth, gently flow, the

suspended solids coalesce to form precipitates which will settle in the chambers on the lower portion of each lamella plate. Influent water flows upwards over the plates. The

deposited precipitates increase in size until they slide or roll down the inclined surface of the plates. This will then collected in the hopper provided at the bottom of the separator.deposited precipitates increase in size until they slide or roll down the inclined surface of the plates. This will then collected in the hopper provided at the bottom of the separator.

MBBR(FMR) MEDIA Lot 1.00 4,40,000.00 440000.00

924.11 MBBR/FMR Media

AIR DIFFUSION SYSTEM

924.12 Air Diffusion System for EQ Tank & Sludge Holding tank

Supplying, installing, testing and commissioning shall consists of coarse bubble duffuser with HDPE pipegrid with necessary orifices HDPE pipe with removable deflector to

provide clog-free oxygen for Equalisation Tank . SETS 1.00 55,000.00 55000.00

Air Diffusion System for STP aeration Chamber I & II SETS 1.00 1,37,500.00 137500.00

924.13 Supplying, installing, testing and commissioning shall consists fine bubble diffuser along with membrane from EDI, USA Shall consists of set of EPDM membranes, SS 304 clips

PVC support pipe(10 ksc pressure rating),PVC fitting, nylon rope braided hose with all accessories to make it retrievable & to provide clog-free oxygen for Aeration Tanks.

AIR BLOWERS (1 W + 1 S) SETS 2.00 2,20,000.00 440000.00

924.14 Supplying, installing, testing and commissioning of Twin Lobe design type air blower complete with motors, pulleys, Rigid one piece CI casing and side plates, silencer, base plate,

Anti-friction bearings, Rotary oil sealings having horizontal configaration as detailed.

924.15 Twin Lobe roots type Airblower of 300m3/hr at 0.5 Kg/Sqcm capacity comprising of common base frame, suction filter ,suction silencer, non return, V belt ,safety valve, belt guard,

drive and driven pulleys,pressure guage, inter connection pipping, discharge silencer, anti vibration pads including required motor.

924.16 2 nos. cast iron lever operated slim seal type butterfly valves of CI body and spheroidal graphite iron disc (SG iron),with nitrile rubber seal, tested to 10 kg / sq.cm Confrming to BS

5155 / MF6 standards and including a set of GI flanges as per BS-10 table 1 including bolt nuts, GI washers, and neoprene rubber gaskets Complete etc., on the suction side.

924.17 2 nos. cast iron lever operated slim seal type butterfly valves of CI body and spheroidal graphite iron disc (SG iron),with nitrile rubber seal, tested to 10 kg / sq.cm Confrming to BS

5155 / MF6 standards and including a set of GI flanges as per BS-10 table 1 including bolt nuts, GI washers, and neoprene rubber gaskets Complete etc., on the delivery side.


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

924.18 1 no. pressure gauge 4" dial with valve tee and fittings.

CHLORINE CONTACT TANK SYSTEM : - UV SYSTEM SET 1.00 2,47,500.00 247500.00

924.19 Supply, installation, testing and commissioning of on line automatic UV System or Automatic electronic sodium hypo dosing unit with automatically operated dosing pump etc., The

unit shall comprise of the following:

One no. single moulded FRP cylindrical type chemical solution tank of 100 litres capacity having detachable lids with moulded inserts for mounting of pumps and stirrer.

One on. Electronic diaphragm type positive displacement pump for chemical dosing with plastic head. The electronic pump shall be operated on 220V single phase supply and shall

be mounted directly on the tank top.

Complete set of pipes, valves and fittings, foot valve magnetic float switch to trip the dosing pump at low level of chemical in the tank.

The free chlorine content in the filtered water shall not be less than 0.5 PPM.

Shall consists of one no. 100 L HDPE/ LDPE tank with one no. PP, diaphragm typr pump of cap 12 lph shall be provided with a tubular level indicator.

a)The pump shall be suitable for the following requirements:

b)Min. Actuating Pressure - 0.3 kg/sq cm

c)Max. Working Pressure - 0.5 kg/sq cm

d)Max. Temperature - 50 C

e)HP-1/2

f)Dosing flow range- 0-5 lph

g)Head - 25 mtr

i)Installation

924.20 SLUDGE HOLDING AND CONVEYING SYSTEM

SLUDGE HOLDING TANK (Civil Construction) - for Reference.

924.21 MOC- Civil Construction

924.22 SCREW PUMP( 1 W + 1 S) No. 2.00 71,500.00 143000.00

Single screw pump

Cap.- 2 m3/hr

Dis. Pressure- 5 Kg/cm2

Pump RPM-300

Motor- 1.5/ 3 phase

Drive - V-belt

924.23 FILTER PRESS SET 1.00 2,75,000.00 275000.00

TYPE OF ELEMENT - PP RECES

TYPE OF DELIVERY -SIDE & OPEN

CLOSING DEVICE (RECOMMENDED) -MANUAL

TYPE OF PLATE SHIFTINGSLIDING-HAND

DRAINAGE SURFACE-PIPS

PLATE SIZE(inches)-24 INCHESx 24 NO'S

TOTAL NO. OF PLATES -23

OPERATING PRESSURE -4-5 KG/CM2

FILTER CLOTH- ONE SET

MATERIAL OF CONSTRUCTION: - MS

FEED HEAD/FIXED HEAD/MOVING PLATE -MS

ROLLERS -CI/MS

PLATES-VIRGIN WHITE PP

FILTER CLOTH-PP WOVEN

TIE BARS -MS

INLET NOZZLE-SS

SPIGOTS-PP

924.24 Sludge Conveyor / Lift/ Hoist Set 1.00 2,75,000.00 275000.00

FILTER FEED PUMPS (1W+1S) Nos. 2.00 27,500.00 55000.00


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

924.25 Supplying, installing, testing and commissioning of filter feed pump Consisting of 2 Nos. centrifuge non-submersible type filter feed pumps (one working +one standby) Flow rate-20

m3/hr to feed semi treated water to secondary treatment process through sand pressure filter, activated carbon filter . The pump and motor mounted on a common base frame with

Dry run protection industrial type electronic liquid level controllers with stainless steel probes/sensors or float switch for automatic operation..

FILTRATION PROCESS

MULTIGRADE SAND FILTER: SET 1.00 1,92,500.00 192500.00

MULTIGRADE SAND FILTER:

924.26 Supply, installation testing and commissioning of multigrade sand pressure filter fabricated out of MS plate 6 mm thick and dish ends out of 8 mm thick plate and painted internally

with two coats of anticorrosive epoxy paint with primer and externally with two coats epoxy primer followed by two coats of epoxy paint of approved colour for filtration of treated

sewage water. The filter shall be suitable for 20 m3/hr flow rate and to operate for 20 hours , The Filter shall be designed for a specific velocity of 20 m3 / hr / sq.m area shall not

be less then 1100 mm DIA. Comprising of inlet distribution and bottom collecting system, Orifice board for monitoring back wash flow, Initial charge of underbed and carbon filtering

media, Complete set of valves, pressure gauge with needle valve and frontal pipe work in MS pipes construction .

Back wash duration - Once in 23 hours for 20 min, Filtering Media - Multi grade of Sand/Pebbles, Pressure drop across unit. - 1.0 Kg / sq.cm (max), Tested Pressure -5.5 kg/cm2

b)ACTIVATED CARBON FILTER (ACF): SET 1.00 2,20,000.00 220000.00

924.27 Supply, installation, testing and commissioning of activated carbon filter fabricated out of MS plate 6 mm thick with dish ends out of 8 mm thick plate and painted internally with

two coats of anticorrosive epoxy paint with primer and externally with two coats epoxy primer followed by two coats of epoxy paint of approved colour, Comprising of inlet

distribution and bottom collecting system., Orifice board for monitoring back wash flow, Initial charge of underbed and carbon filtering media, Complete set of valves, pressure

gauge with needle valve and frontal pipe work done with MS pipes for filtration and removal of colour in treated sewage water suitable for 20 m3/hr flow rate and to operate for 20

hours. specific velocity of 15m3 / hr / sq.m area and dia not less than 1300 mm DIA . Back wash duration - Once in 23 hours for 20 minutes, Filtering Media - Activated Carbon,

Pressure Drop across unit. - 1.0 kg/sq.cm (max), Tested Pressure -5.5 kg/cm2

924.28 Treated Water pump for horticulture (1W + 1S) 20 m3/hr x 4.5 bar Nos. 2.00 55,000.00 110000.00

PLANT PIPING JOB 1.00 1,92,500.00 192500.00

924.29 Supplying, installaing, testing and commissioning shall consists of interconnecting piping, fittings, valves within the battery limit of the Sewage Treatment Plant MOC of the piping:

PVC (15 Kg / Sq.cm pressure rated) piping with PVC valves.

A)Providing and Fixing of Galvanised iron pipes to I. S. 1239 (Jindal) including all G.I fittings like tees, elbows, bends, unions, offsets, Hex nipples collarscutting threading the

pipes, jointing, using white lead and cotton thread and pressure testing the joints, including chasing the walls with groove cutting machine clearing the debris grouting of concealed

pipes, MS hook for fixing and making good the walls and floors.

B)Providing and fixing of ball valves of brass body nickel plated with stainless steel ball, lever operated and tested to 20kg / sq.cm.

C)Providing and fixing cast iron lever operated slim seal type butterfly valves of with spheroidal graphite iron disc (SG iron),with nitril rubber seal, tested to 10 kg / sq.cm (inter valve

make) including a set of GI flanges as per BS-10 table bolt, nuts, GI washer, Neoprene rubber gaskets etc.complete.

D)Providing & fixing of slim seal type cast iron horizontal flap type non return valves tested to 20 kg / sq.cm including a set of GI flanges as per BS - 10 Table, bolts, nuts, GI

washers, Neoprene rubber gaskets etc.complete.

ELECTRICAL PANEL WORKS SET 1.00 4,40,000.00 440000.00

924.30 Shall consists of MCC (motor control center) Panel to accommodate full load of the Sewage Treatment all the drive units with cabling,glanding within the STP Compartmental ,

Indoor wall mounted type with top bottom entry for cable with 1 No. Energy meter.

To receive, control and distribute electrical power at 440 V, 50 Hz, AC in a sheet steel house.

MCC is to be manufactured/assembled as per the latest ISI specification, Indian Electricity Rules, Including special requirements of concerned state electricity inspectorate.

The switch board shall be fabricated out of 14 SWG sheet steel and shall be un cubical designq.

MCC shall be provided with the following feeders:

Incoming Feeder :

Voltmeter with selector switch.

LED type indication for 3 phases.

Outgoing Feeder :

b)Motor feeder, 1 no. 3 phase and neutral MCCB of suitable capacity to be provided for lighting requirement of STP.

Cabling


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

Power Cables (LT) for use on 415 V system shall be of 1100 volt grade, Aluminium conductor, PVC insulated as per IS : 1554 (Part I). Motor above 5 HP copper conductor cable

should not be less than 2.5 sq mm of size to be used.

g)Control Connector, Lugs/sockets shall be of copper conductor and of Aluminium for conductor cable,suitable,solderless, crimping type.

Installation and wiring with fixing cable trays

INSTRUMENTATION: Lot 1.00 1,65,000.00 165000.00

924.31 Pressure gauges: One for each rotating equipment ( for raw sewage and sludge lines it shall be 4 " dia Diaphragm type for air line and Bourdan type).Flow meters: ElectroMagnetic type for inlet & outlet water

pH Meter-on line for monitoring of pH of treated water

UltraFiltration Module

Supplying Installing testing & Commissioning of Ultrafiltration system for polishing of treated effluent to produce 10 m3/hr

924.32 of polished water meeting flushing water requirements. System to be stand alone unit with separate control panel & automation features as required in Ultrafiltration Membranes of

reputed make. (Dow/Hydranautics/Norit) Lot 1.00 22,00,000.00 2200000.00

924.33 Erection and Commisioning of the STP (including approval from statutary Authorities ) Set 1.00 5,50,000.00 550000.00

Notes

All Civil Work including plant room ventilation in clients scope

925.00 HYDROPNEUMATIC SYSTEM AND VARIOUS PUMPS

A)Variable Speed Hydro-booster System for Domestic & Flushing water supply :A)Variable Speed Hydro-booster System for Domestic & Flushing water supply :

Compact self contained Hydro-booster system comprising of following :

In-line, vertial multistage, centrifugal clear water pumps with SS-304 casing, S.S 304 impeller and SS-304 shaft, C.I. Base CED coating & head TEFC motor (with mechanical seal)

Vendor to submit performance curves and technical catalogue of the proposed model for review and information.

Panel mounted microprocessor multi pump contoller with large graphical display with VGA 240 x 320 pixels and variable frequency drive (VFD) integrated in a single body or as

separate components with pressure sensor transmitter (one dedicated to each pump), diodes to indicate pump ready, pump running and fault and capable to communicate with

other controllers following MODBUS-RTU or BACNET Class-2 protocol through RS485 port. System should be capable to compensate for frictional losses at lower flows. All

alarms should be displayed in the controller. System should be equipped with dry running protection. Indication of all type of faults / on-off status / electrical parameters shall be

available on panel and central IBMS monitors. On-off operation for all pumps shall be availble on BMS system

Pre-charged diaphragm pressure vessel with interchangeable membrane, charging connection, connected to outlet header with necessary flanges, gaskets, isolating valves,

nuts/bolts etc. complete (size of pressure vessel shall be 300 liters (approx.) or as per manufacturer recommendation).

Set of accessories such as G.I headers for suction and discharge, control valves, non return valves, pressure switches, pressure transducers, pressure gauge, flow meters, inter

connecting power and control cabling etc. complete.

925.01 For supplying DWS to all areas - (Hydro-1) (BOH)

925.02 Capacity per pump - 4.16 lps [15.0 m3/hour]

925.03 Head - 45mt

925.04 Approx. Elec. Load. - 5.6 KW each pump

925.05 Location - Pump Room

925.06 1 Set = 2 Nos. Pump (1 Working + 1 Standby - cascade operation)

925.07 Suction head - flooded positive suction

925.08 Supply Set 1.00 7,87,600.00 787600.00

925.09 Installation, testing & commissioning Set 1.00 38,500.00 38500.00


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

1b)STP Recycled water pumps (Flushing) - (Hydro-2) - Pneumatic system for transfer application (BOH)

For transferring STP recycled water from final treated water tank to flushing OHT and soft water OHT


925.11 Head - 40.0 m

925.12 1 Set = 2 Nos. pump (1 working+1 standby), cascade operation


925.14 Location - STP Pump Room

925.15 Supply Set 1.00 4,42,750.00 442750.00


B)Soft Water Transfer Pump - P1

For transferring soft water U.G. tank to Soft water O.H.T


925.18 Head - 40.0 m



925.21 Location - Inside Soft Water UG Tank

925.22 Supply Set 1.00 4,47,150.00 447150.00


WATER SUPPLY / TRANSFER PUMPS

925.24 In-line, vertial multistage, centrifugal clear water pumps, speed upto 2900 rpm, with SS-304 casing, S.S 304 impeller and SS-304 shaft, C.I. Base CED coating & head, connected

to a TEFC motor (with mechanical seal) suitable for 400 / 440 volts, 3 phase 50 cycles A.C. supply with 150 mm dia pressure guage with gunmetal isolation valve, vibration

eliminating pads as required, M.S fabricated base plate bolted to cement concrete foundations complete. Vendor to submit performance curves and technical catalogue of theeliminating pads as required, M.S fabricated base plate bolted to cement concrete foundations complete. Vendor to submit performance curves and technical catalogue of the

proposed model for review and information.

Electrical Starter panels complete with O/L Relay with Single phasing preventer feature, earth leakage relay, ON-OFF and Trip Indicating lamps, contactors contacts for Building

Automation System, interlocking, level controller with operational mode as one pump working at low level, both pumps at high level with a hooter alarm and cut off at dry level,

cascade operation, working / standby slelction, etc. suitable for the motor H.P. as specified below and with provision for remote P.B. on/off complete as required. The on/off

operations for all pumps shall be available on central BMS system

Water Treatment Feed pumps - P2

For feeding raw water to water treatment plant and store in soft / treated domestic water tank


925.26 Head - 30.0 m



925.29 Location - Pump Room

925.30 Supply Set 1.00 2,42,000.00 242000.00


C)Pumps Room Sump Pumps:

925.32 Supply, installation, testing & commissioning of Submersible single stage single entry pumps connected to submersible motor (The motor shall be watertight according to IEC class

IP 68, and incorporate class F, insulation materials to withstand a continuous operating temperature of 155 deg C) for 415 + 10% volts, 3 phase, 50 cycles A.C. power supply with

mechanical seal, pump connector unit with rubber diaphragm and bend, vertical discharge pipe, electrical panel with in built level controller with operational mode as one pump

working at low level, both pumps at high level with a hooter alarm and cut off at dry level as determined. The pump shall be provided with a lifting devise of pull chain/guide rail &

G.I. heavy class rising main of 5m length including interconnecting piping, valves (Ball Valve / Butterfly), Non return valves (GM/CI) 15 m cable etc. as per requirement complete in

all respects. (Pumps shall be installed in a set of two pumps One working and One standby, with cascade operation).

(Pumps suitable to handle solids upto 25 mm size with C.I. body, SS304 shaft, C.I. impeller with 15 mtrs cable, double mechanical seal).

Electrical Starter panels complete with O/L Relay with Single phasing preventer feature, earth leakage relay, ON-OFF and Trip Indicating lamps, contactors contacts for Building

Automation System, interlocking, level controller with operational mode as one pump working at low level, both pumps at high level with a hooter alarm and cut off at dry level,

cascade operation, working / standby slelction, etc. suitable for the motor H.P. as specified below and with provision for remote P.B. on/off complete as required. The on/off

operations for all pumps shall be available on central BMS system


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

Pump Room Drainage Pumps - P5

925.33 Capacity/Flow Rate - 4.16 LPS (15.0 M3/Hr)

925.34 Head - 17.0 m



925.37 RPM - 2900

925.38 MOC - C.I Casing / C.I. Impeller / S.S. Shaft

925.39 Location - Pump Room Sump No- 11

925.40 Supply Set 1.00 1,90,300.00 190300.00


D)STP area drainage pumps - P11

925.42 Capacity/Flow Rate - 2.78 LPS (10.0 M3/Hr)

925.43 Head - 17.0 m

925.44 1 Set = 2 Nos. pump (1 Working + 1Standby), cascade operation


925.46 Location - Sump No.-6

925.47 Supply Set 1.00 1,90,300.00 190300.00


E)PUMPS WATER TREATMENT PLANT

925.49 Filter Feed Pump, centralfigual, horizontal pull back, complete with base plate, mechanical seal, SS impeller, Stainless Steel, coupling, electric motor 3 phase 400 volts 50 hz for

Water Softener, capacity 10 Litre per second head 35m, (1working + 1standby) Nos 2.00 82,500.00 165000.00

E2.)Feed Pumps for Softener Plant (1working +1standby)

925.50 Capacity : 5 LPS

925.51 Head : 30 Mtrs

925.52 HP : To Suit Motor

925.53 Motor RPM : 2900

E3.)Irrigationl Pumps (1working +1standby) Nos 2.00 71,299.80 142600.00

925.54 Capacity : 3 LPS

925.55 Head : 35 Mtrs

925.56 HP : To Suit Motor

925.57 Motor RPM : 2900

925.58 Providing and fixing dust and vermin proof cubical type Front Operated, Motor Control Centre (for water pumps & tubewell) in Pump Room, fabricated from 2 mm thick CRCA

sheet duly powder coated in approved shade and comprising of : [Pump Room) - [For Soft water pump and transfer pumps] Job 1.00 2,20,000.00 220000.00

INCOMING

925.59 a. One TPN, 200 amp MCCB 35 KA rating with rotary operating handle.

925.60 b. One 96 sq.mm panel type multi meter of suitable range with rotary selector switch.

925.61 c. One set of indicating LED lamps (RBY)

BUS BAR

925.62 TPN sheathed aluminium bus-bar 200 Amps in separate bus-bar chamber.

OUTGOING


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

i. For Skid Mounted Pumps

a))TPN MCCB 40 Amp/25kA 1 No.

ii. 30 amp TP MCCB 25 KA 3 Nos. for Tubewells

iii. 30 amp TP MCCB 25 KA 2 Nos. for filter feed pumps

iv. 30 amp TP MCCB 25 KA 2 Nos. for soft water filter feed pump

v. 30 amp TP MCCB 25 KA 2 Nos. for soft water transfer pump

vi. Spare 40 amp TPN 1 no. 20 amp DP 2 nos., 10 amp DP 4 Nos.

925.63 Fully automatic DOL starter with push buttons and ON/OFF/TRIP indicating light for each water pump.

925.64 Rotary type auto/manual selector switches for each set of pump

925.65 96 sq. mm panel type ampere meter reading 0-20 Amps for each pump.

925.66 Single phase preventers for each motor.

925.67 Colour coded internal wiring from incoming main to bus-bar switchgear, starters, meters indicating lamps complete in all respects.

925.68 Sequence and Relays for Tandem operation of pumps.

925.69 Pressure switches & Level Controller for filter feed pumps, (4 nos.)

925.70 Pressure switches 2 nos for start / stop of soft water transfer pumps

925.71 Potential free terminals one set of change over contacts,

925.72 Sequence controller and level controller in under ground water tank for tubewell pumps,

925.73 Control, Power Wiring & earthing

. D)Bucket strainer with Stainless Steel Bucket M.S. flanged connection

a)150 mm dia NB (Pump Room) No. 4.00 24,354.00 97416.00

E.)Providing and fixing CIDF, Swing Check Type, NRV as per IS:5312 complete with flanges, gasket (CAF) etc. in all respect (PN 10 Kg)

a))80 NB Nos. 6.00 9,586.50 57519.00

F.)Butterfly valves PN16 with flanges and G.I. fasteners.

100 NB Nos. 8.00 6,457.00 51656.00

80 NB Nos. 6.00 4,658.50 27951.00

50 NB Nos. 3.00 3,872.00 11616.00

G.)Standard dial type pressure gauge dia 100mm with screwed inlet with isolation cock suitable for liquid gauge to show pressure upto (Dial size - 100mm dia).

a))(0-16) Kgs./sq.cm. Each 6.00 1,265.00 7590.00

H.)GI pipes to IS:1239 (heavy class) including all fittings like couplings, bends, elbows, tee, flanges etc. welding/threaded joint as required, painting with zinc chromate primer and 2

coats of synthetic enamel paints.

925.74 Pump House

925.75 150 mm dia Metre 5.00 3,797.20 18986.00

925.76 100 mm dia Metre 30.00 2,626.80 78804.00

925.77 80 mm dia Metre 50.00 1,804.00 90200.00

925.78 65 mm dia Metre 20.00 1,161.60 23232.00

925.79 25 mm dia Metre 1.00 567.60 568.00

F)Structural Steel Work

a))Supply, fabrication, erection, painting of pipe supports of structural steel, for piping work (please note that the structural steel work for any other item which is included in the

description of that item will not be measured under this head) including suitable dash fasteners in concrete slabs/walls and painting. Kgs. 2000.00 121.00 242000.00

J.)Water Treatment Plant Filtration Units (MGF, ACF) with UV treatment complete 300 KL per day, 25 KL per hour (to be decided as per water quality) of tubewell. Output to meet

IS 10500 Job 1.00 6,87,500.00 687500.00


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

K.)Supply & Installation of water softning plant to achieve hardness (80 - 100 PPM) Mild steel pressure vessel (all constructional details incl. conformity to IS:2825 to be as in the

above itemno.11- Filtration Plant) ready for operation; Capacity 15 KL per hour, capacity 180 KL per day, OBR 180 KL, other construction - complete with dished ends, supporting

legs and facing pad for pipe connection, internal rubber lining with non-leaching rubber of 3mm thickness complete with manhole, cover frontal pipe work fitted with valves.

Plant shall be provided with inlet, outlet pressure gauge isolated by stainless steel needle valve and stainless steel nipple, sample valves with frontal pipe work,HDPE brine tank,

hardness test kit complete with manually operated cast iron diaphragm valves for normal operation and regeneration with hydraulically operated ejector, initial charge of resin and

connecting piping and resin traps.Drawing showing internal details to be submitted for approval before fabrication is undertaken. (Rate of flow per unit area to be as per resin

manufacturers recommendation. Quality of outgoing water- commercial zero. Nos. 1.00 10,45,000.00 1045000.00

926.00 SOLID WASTE MANAGEMENT

926.01 Automatic Continuous Drum Composter With Integrated Crusher

Capacity : NAC 1000

926.02 Model :- NAC 1000

926.03 Waste Processing Capacity : - 950-1000 Kg Per Day.

926.04 Composting Method :- Micro-organism Based Natural Composting.

926.05 Time to Convert Waste in to Manure :-Approximately 8-10 Days.

926.06 Compostable Items :- Fruit & vegetable scrap, Egg shells, Plate waste, Bread, Bakery waste, Fish, Dried garden waste, wet leaves, meat & other compostable organic biomass.

926.07 Non Compostable Items :- Stones, Metal, Plastic, Big Bones, Coconut shells, Tea & Coffee bags , Medical waste, Glossy or coated paper, Large Branches.

926.08 Operation :- Fully Automatic 926.08 Operation :- Fully Automatic

926.09 Input :- Any Kind of Segregated Organic Waste.

926.10 Output :- Organic Manure

926.11 Volume Reduction :- Approximately 65-70 %

926.12 Compost Generated Per Day :- Approximately 30-35 % of Waste Input.

926.13 Machine Dimensions ( L x W x H ) Ft :- 18 x 8.2 x 8.2 Ft

926.14 Approx Machine Weight :- 4790 Kg

926.15 Power Supply :- 415-440 Volts / 50 Hz, 64 Amp

926.16 Phase :- III Phase

926.17 Power Rating of Machine :- 13.05 kW

926.18 Power Consumption :- 86 Units per day.

926.19 Composting Drum Material :- MS – Powder Coated

926.20 Motor Make :- ABB / Nord / Siemens / CG

926.21 Motor Rating :- 5 HP / 3.7285 kW

926.22 Blower :- Rexnord / Almardo

926.23 Blower Rating :- 600 W / 0.60 kW

926.24 Blower Size :- Fibre Body – 24”

926.25 Air Warming System :- Coil Air Warmer

926.26 Heater Rating :- 5 kW

926.27 Crusher Type :- Petal Crusher

926.28 Crusher Rating :- 5 HP / 3.7285 kW

926.29 Crusher Capacity :- 150 Kg / Hr

926.30 Material of Construction ( MoC ) :- Stainless Steel ( SS 304 )

926.31 Crushing Speed :- 2800 RPM

926.32 Reduced Particle Size :- 2-4 mm

926.33 Control Panel :- HMI – Touch pad with programming facility

926.34 Control System :- Programmed preset functions

926.35 Waste Input & Manure Output :- Separate door for both operations.

926.36 Drying System :- In Built

926.37 Mounting :- Wheels / Pads

926.38 Handles & Locks :- Standard Quality

926.39 Overload Protection :- Overload & Current Protection for Motor & Blower

926.40 Curing System :- Inbuilt Curing System


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

926.41 Addition of Saw Dust & Culture :- Required

926.42 Outside Housing :- MS – Powder Coated

926.43 Water Discharge, Leachate, Methane, Harmful Gases :- No

926.44 Any By Product :- No, Only Organic Manure is the End Product.

926.45 Odourless & Noiseless :- Yes

926.46 Warranty :- 12 Months from the date of invoice

926.47 Compost Removal :- Once in 8-10 days

926.48 Use of Compost :- Can be used directly for farming.

926.49

926.50

926.51 1.00 18,59,341.00 1859341.00

INTERIOR WORK

SH: AUDITORIUM

WALL PANELING WORK

927.00 Wall panelling / partition with Melamine faced 3 layered flat pressed wood particle board of approved make and brand as per direction of Engineer-in-Charge of requisite grade

bonded with phenol formaldehyde synthetic resin conforming to IS: 848 - 1974 (excluding the cost of supporting frame work and teak wood battens / lipping)

927.01 Prelaminated particle board conforming to IS: 3087 - 1985 and IS 12823 -1990.

927.02 i) One side decorative laminated


Plant Requirements :-

1.Well ventilated shed area as per drawing

2.The shed should have concrete levelled flooring and a covered roof for protection of machine from rain. Job


927.04 12mm thick Sqm 210.00 1070.00 224700.00

928.00 Supplying, fitting and fixing boiling water proof ply conforming to IS: 710-1977 bonded with phenol formaldehyde synthetic resin conforming to IS: 848-1974 of approved make and

brand fitted and fixed as per design as per approval and direction of Engineer-in-Charge. [excluding the cost of supporting frame work and teak wood batten/Lipping] In Ground

Floor

928.01 (i) 12mm Sqm 120.00 1290.00 154800.00

928.02

929.00 Partition with soft insulation board (of 12mm thick) as per design fitted and fixed complete (excluding the supporting framework but including necessary teak wood battens of size

40 mm & 25 mm). In Ground Floor

929.01 Ordinary Teak Sqm 50.00 516.00 25800.00

930.00 Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, consisting of floor and ceiling channel 50/51 mm wide having equal flanges of 32 mm

and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or

metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling

channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor

fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and

ceiling channels at the spacing of 300 mm centre to centre.The boards are to be fixed to the frame work with joints staggered to avoid through cracks, M.S. fixing channel of 99

mm width (0.9 mm thick having two flanges of 9.5 mm each) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including

jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x 0.5 mm), joint finisher and two coats of primer

suitable for board as per manufacture‟s specification and direction of engineer in charge all complete

i) 70 to 71 mm overall thickness partition using 10 mm thick High pressure steam cured non-Asbestos multipurpose Cement Board reinforced with cellulose fibre

(Density>1250kg/m3) manufactured through autoclaving process as per IS: 14862 with suitable fibre cement screws.Sqm 290.00 1474.00 427460.00

931.00 Supplying fitting, fixing decorative lamination conforming to IS: 2046 : 1995 as per approved make, brand, finish and thickness with fitting, fixing the same on Particle/MDF / Ply

Boards with recommended / approved adhesive with proper clipping the sides for better attachment as per direction of Engineer-incharge. The rate includes the cost of labour,

adhesive and all incidental charges thereof. In ground floor

Glossy/Matt/Suede excluding surface texture or metallic lustre.

(i) Thickness of laminate 1.5mm Sqm 130.00 802.00 104260.00


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

(ii) Thickness of laminate 1 mm Sqm 150.00 688.00 103200.00

932.00 Providing and fixing, in position concealed G.I. section for wall paneling using board of required thickness fixed on the „W‟ profile (0.55 mm thick ) having a knurled web of 51.55

mm and two flanges of 26 mm each with lips of 10.55 mm, placed @ 610 mm C/C in perimeter channel having one flange of 20 mm and another flange of 30 mm with thickness of

0.55 mm and web of length 27 mm. Perimeter channel is fixed on the floor and the ceiling with the nylon sleeves @ 610 mm C/C with fully threaded self-tapping dry wall screws.

Board is fixed to the „W‟ profile with 25 mm countersunk ribbed head screws @ 200 mm C/C., all complete as per the drawing & directions of Engineer-in-Charge, the joints of the

boards are finished with specially formulated jointing compound and 48 mm wide jointing tape to provide seamless finish

933.00 6 mm thick Designer Multipurpose Cement board (High Pressure steam cured, tested as per AS-1530 part 3 & BS-476 Part 4,5,6,7&8, density > 1450kg/m3, Bond strength 15

N/sqmm fire resistant, termite proof, moisture resistant) reinforced with cellulose fibre manufactured through autoclaving process as per IS : 14862 & ISO 8336, with fibre cement

screws in partition as per drawings and direction of Engineer-in-Charge complete. (The above stated item can be used successfully to cover up efflorescence & damp affected

walls to improve the aesthetic view).Sqm 130.00 763.00 99190.00

934.00 Supplying and fitting in all places of wall panelling to all heights and fixing on pre- framed existing frame work grid with glass wool of 50mm thick having density of 48 Kg per cum. to

be inserted into the pre - fabricated slot covered the glass wool by marking cloths treated with Naptha @ 0.07 Ltr.per Sq.m. of cloths. Finally 12.5mm thick gypsum Fulton board

having size 595mmX595mm fitted & fixed into the pre-fabricated grid and covered the all perifirial gaps of fulton board by self additive fibre tape with necessary filler if required,

complete in all respect as per direction of the Engineer-in-charge.Sqm 95.00 1182.00 112290.00

935.00 Partition of teak veneer [1 mm] as per design fitted and fixed complete (excluding the supporting frame work & necessary teak wood battens): In ground floor

935.01 (i) 4mm thick commercial quality Sqm 95.00 465.00 44175.00

936.00 Wall paneling with Gypsum Plaster Board of 12.5 mm thick fitted to G.I. channel of 55 mmx50 mm placed at 300 mm c/c in horizontal direction and metal stand 55 mmx48 mm936.00 Wall paneling with Gypsum Plaster Board of 12.5 mm thick fitted to G.I. channel of 55 mmx50 mm placed at 300 mm c/c in horizontal direction and metal stand 55 mmx48 mm

placed @900 mm c/c in vertical direction connected with G.I. connecting clips. 12.5 mm thick Gypsum plaster based are to be fixed with G.I. channel by machine screws. The

boards are to be joined with jointing compound and fibre tape and finished with top coat etc the rate includes the cost of all materials, labour charges including scaffolding etc.

complete as per direction of the Engineer-in-charge. In ground floorSqm 120.00 994.00 119280.00

937.00 Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth

finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC.

In Ground Floor:

937.01 Two Coats Sqm 190.00 4510.00 856900.00

938.00 Protective and Decorative Textured exterior high class matt finish paint of approved quality, composed of special Tharmoplastic Resin containing fine crystalline additives derive

from Granite as per manufacturer's specification and as per direction of EIC to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and

all incidental charges but excluding the cost of primer.

In Ground floor - Two Coat Sqm 135.00 101.00 13635.00

939.00 Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the

surface, if necessary

939.01 (a) On timber or plastered surface :

939.02 With super gloss (hi-gloss) -

939.03 One coat (with any shade except white) Sqm 95.00 81.00 7695.00

940.00 French polishing to wood work including preparing surface (ordinary gloss)

On new wood work Sqm 330.00 467.00 154110.00

941.00 Polyurethane Polishing to woodwork with required colour as approved by Engineer-in-Charge with preparing surface including scaffolding and hire charges of compressor machine

including cost of filler and hardener material such as P. U. Sealing, P. U. Top coat (Matt/Glossy), Thinner, Spirit etc. and inclusive of all operation, material and labour complete as

per direction of Engineer-in- Charge.Sqm 170.00 837.00 142290.00

942.00 Melamine finish coating over polished wooden surface after preparing the surface as per decision and direction of Engineer-in-Charge Sqm 320.00 75.00 24000.00


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

943.00 Supplying best Indian laminated safety glass 5 mm. thick including cutting to required sizes, setting on putty bases and fitted and fixed with teak glazing beads (19 mm x 12 mm)

including putty and nails as necessary complete.(In all floors for internal wall & upto 6 m height for external wall) Sqm 40.00 2047.00 81880.00

944.00 Supplying and affixing optically clear polyester sun control window film having acrylic pressure sensitive adhesive on one side & an acrylic abrasion resistant coating on the other,

with composition of infrared absorbing carbon & free from any optical defect. The film characteristics should conform to ASTM E308, ASTM E903, ASTM E84 and ASHIRAE. The

film should be pasted after preparatory works without any cracking, delamination, bubbling, discolouring and variation in total transmission of light across the width at any portion

along the length doesn't exceed 2% over the average including scaffolding & relevant others to complete in all respect as per manufacturer's specification & direction of Engineer -

in-Charge. (Note: This work should not be executed without specific permission of Superintending Engineer)

Superior Quality : Film Thickness - 2.0 Mil, Glare Reduction > 75%, U factor < 1.03, Emissivity < 0.70 Sqm 50.00 544.00 27200.00

945.00 Strong bamboo frame work (for thatched roofing) with 75 mm. dia full bamboo rafters spaced at 350 mm. centres and tied with transverse bracings at 380 mm. spacing (each

bracing consisting of a pair of quarter bamboo, one at top and the other at the bottom of the rafters) fitted and fixed in position complete.Sqm 75.00 223.00 16725.00

946.00 Single durma mat lining (over bamboo roof frame) fitted and fixed complete Sqm 50.00 60.00 3000.00

947.00 Rice straw thatching in roof including ridges and hips

947.01 225 mm. (pressed) thick Sqm 85.00 260.00 22100.00

948.00 Diagonally woven crushed bamboo mat including durma mat lining and both longitudinal and transverse intermediate stiffners (about 300 mm. centre each way) and tied with 18

B.W.G. galvanised wire fitted and fixed in position complete but excluding costof supporting frame work.

948.01 In wall fencing etc Sqm 110.00 102.00 11220.00948.01 In wall fencing etc Sqm 110.00 102.00 11220.00

948.02 In ceiling Sqm 125.00 112.00 14000.00

949.00 Bamboo walling made of crushed bamboo or split bamboo or bamboo twigs(kanchis) as directed and tied with necessary stiffners of split bamboo (in pairs) made of 100mm dia.

Bamboo fitted and fixed complete (but excluding the cost of supporting frame work) Sqm 220.00 108.00 23760.00

950.00 Mud pluster (25 to 37.5) mm. thick with prepared mixture of earth and cowdung (10:1) with admixture of straw chopping and finishing smooth with lipping of cowdung and earth

(1:4):950.01 (a) In walls or floors Sqm 575.00 25.00 14375.00

950.02 (b) In ceilings Sqm 575.00 25.00 14375.00

951.00 Mud lipping with of cowdung and earth mixture (1:4) :

951.01 (a) In walls or floors Sqm 300.00 36.00 10800.00

951.02 (b) In ceilings Sqm 300.00 61.00 18300.00

952.00 Supplying bubble free float

952.01 i) 8mm thick coloured / tinted / smoke glass. Sqm 120.00 907.00 108840.00

952.02 ii) 10 mm thick coloured / tinted / smoke glass. Sqm 50.00 1141.00 57050.00

952.03 iii) 12mm thick coloured / tinted / smoke glass. Sqm 150.00 1854.00 278100.00

952.04 iv) 12mm thick cleared toughened glass coforming to IS: 2553-1992 (Part-II) Sqm 90.00 3235.00 291150.00

952.05 v) 12mm thick coloured / tinted / toughened glass coforming to IS: 2553-1992 (Part-II) Sqm 35.00 4118.00 144130.00

952.00 Supplying, Aluminium Grill with F channel frame of approved make and brand having ultimate tensile strength of 19 Kg/Sq.m. and modulus of elasticity 7000 kg/ sq.m., with 15

micron anodised fitted & fixed with necessary screws etc. complete as per direction of Engineer-in-charge.

953.00 Grill made with 10 mm wide and 5.2 mm thick aluminium sheet having expansion width of 66.00 mm and weight not less than 3.26 Kg/Sq.m. Sqm 70.00 1571.00 109970.00

954.00 Providing and fixing exterior quality Aluminium Composite Panel (ACP) wall cladding on existing Al. /MS frame work with GI brackets, ACP fixed on the existing frame work by

folding the edges of ACP panel (Engraving the rear surface of ACP sheet) with CP angles, cleats and strainless Steel screws forming groves at the periphery of ACP panel. Such

grooves filled with foam and silicon sealant etc. complete with all materials (but including the cost of silicon sealant), labour, scaffolding and all other incidental charges complete in

all respect as per specification and direction of Engineer-in-charge. (Mode of payment is on finished surface area of ACP) Sqm 120.00 2878.00 345360.00


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

955.00 Designing of different customised curved & plain metal craft by laser cutting on different metal sheets of varying thickness for special architectural application as facade/wall

panel/ceiling decoration as per design, drawing or as approved standard by the Engineer-in-charge including transportation. (Mode of measurement - linear /peripheral dimension of

laser cut area)

Mild Steel Plate, Aluminium & Stainless Steel

955.01 i) 2.0mm thick M 310.00 100.00 31000.00

955.02 ii) 1.5mm thick - Mild Steel Plate M 310.00 82.00 25420.00

Copper & Brass

955.03 i) 2.0mm thick M 190.00 112.00 21280.00

955.04 ii) 1.5mm thick - Mild Steel Plate M 190.00 88.00 16720.00

956.00 Supplying, Fitting & fixing different factory made Metal Craft Sheet (excluding cost of metal crafting) incluing cost of powder coating (for M.S, Aluminium plate) & finished metal

sheet with all fitting accessories complete in all respect as per diection of Engineer-in-Charge.

Mild Steel Plate

956.01 i) 2.0mm thick Sqm 105.00 1627.00 170835.00

956.02 ii) 1.5mm thick Sqm 75.00 1540.00 115500.00

Aluminium Plate

956.03 i) 2.0mm thick Sqm 55.00 1810.00 99550.00

956.04 ii) 1.5mm thick Sqm 55.00 1565.00 86075.00

Stainless Steel Plate

956.05 i) 2.0mm thick Sqm 85.00 3027.00 257295.00956.05 i) 2.0mm thick Sqm 85.00 3027.00 257295.00

956.06 ii) 1.5mm thick Sqm 100.00 2401.00 240100.00

Copper Plate

956.07 i) 2.0mm thick Sqm 95.00 8160.00 775200.00

956.08 ii) 1.5mm thick Sqm 125.00 6260.00 782500.00

.

Brass Plate

956.09 i) 2.0mm thick Sqm 78.00 6707.00 523146.00

956.10 ii) 1.5mm thick Sqm 77.00 5164.00 397628.00

956.00 Supplying, fitting & fixing Glass mosaic tiles at finished plain wall surface of size 20 mm x 20 mm x 4 mm in all colour, design, fixing in customize design as per direction of

Engineerin- Charge. The glass mosaic tiles to be fixed on the wall surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. The

rate is inclusive of all operation, material and required pattern approved by Engineer-in-Charge. [At Ground Floor]

iii) Mural aligned/ CAD Design Type Sqm 65.00 3614.00 234910.00

957.00 Supplying, fitting & fixing best quality digital printed Ceramic tiles in coloured decorative on walls and floors to match with the existing work & 4 nos. key stones (10mm) fixed with

adhesive 4.5 mm thick at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of

concrete surface, if necessary or by synthetic adhesive & grout materials etc. With polymerised adhesive and epoxy grout pointing including spacer - 2mm (When tiles are laid over

existing hard ready surface) all complete as per direction of Engineer-in-charge. Sqm 43.00 1060.00 45580.00

958.00 Supplying, fitting & fixing true to line and level digital elevation Ceramic tiles of approved brand conforming to IS:15622:2006 Group B III and tested as per IS:13630:2006 as

ornamental cladding on external wall in natural stone, brick, wood, bamboo pattern/ design fixed with adhesive 4.5 mm thick at the back of each tile & finishing the joints with white

cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. With

polymerised adhesive and epoxy grout pointing including spacer - 2mm (When tiles are laid over existing hard ready surface) all complete as per direction of Engineer-in-charge.

Sqm 52.00 982.00 51064.00


in ground floor.

(ii) Grill weighing above 16 Kg./sq.mtr and above Kg 405.00 70.46 28536.00


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

Accoustical TreatmentHall false ceiling

Pixel Smery 1200x2400x12.5mm, Taper edge

960.00 Supply and Installation of Pixel Smery perforated GFR gypsum panels, backlined with acoustical fleece and consisting of Pixel Taper, backlined with acoustical paper having

3x3mm square perforations @ 8.33mm pitch -10.2 % open area, size 1200x2400x12.5mm tapered long edges, volume density of base board 800 Kgs/m3, weight 9Kgs/m2 on

framework so as to get desired design and profile as per arch dwg. Pixel Taper is installed on the framework with suitable fasteners. The tapered long edges are then filled and

finished with Seam AJC and tape . The short square edges are also similarly finished but no tape. Apply one coat of white primer with roller brush evenly across the Pixel surface to

achieve uniform colour.Wallpaper skillsets to apply vinyl glue thinly, evenly and fully on Pixel to receive the Anutone Smery acoustical paper. Cut Smery rolls with sharp knife to

required size. Paste the Smery on Pixel and smooth it with plastic rasper. Ensure butt joints between successive drops are fine and level.

Note:-Frame work to be paid in respectively item

Wherever Smery joints are aligned with Pixel perforations ensure to block/close the perforations by using Seam AJC to achieve smooth surface below the joints. Smery is finished

with approved colour water base acrylic paint by using roller brush. Paint a second finishing coat on the Smery when the first coat is dry. The system is backlined with the

acoustical infill SynthPF 10x25.

960.01 Technical Parameters

960.02 • Fire (Class) – A2-s1, d0

960.03 • Acoustics – NRC upto 0.75

960.04 • Thermal conductivity (W/mk)– na

960.05 • Climate (°C, RH) – 50, 70

960.06 • Light reflectance (%) – Paint dependent

960.07 • Green (VOC, RC %) – Low, 25 sqm 1000.00 3024.14 3024140.00

Stage false ceilingPixel Smery 1200x2400x12.5mm, Taper edge

961.00 Supply and Installation of Pixel Smery perforated GFR gypsum panels, backlined with acoustical fleece and consisting of Pixel Taper, backlined with acoustical paper having

3x3mm square perforations @ 8.33mm pitch - 10.2 % open area, size 1200x2400x12.5mm tapered long edges, volume density of base board 800 Kgs/m3, weight 9Kgs/m2

finished with Smery acoustical paper, size 1000x25000x0.75mm and acrylic paint installed on framework so as to get desired design and profile as per arch dwg. Pixel Taper is

installed on the framework with suitable fasteners. The tapered long edges are then filled and finished with Anutone Seam AJC and tape . The short square edges are also similarly

finished but no tape. Apply one coat of white primer with roller brush evenly across the Pixel surface to achieve uniform colour.Wallpaper skillsets to apply vinyl glue thinly, evenly

and fully on Pixel to receive the Smery acoustical paper. Cut Smery rolls with sharp knife to required size. Paste the Smery on Pixel and smooth it with plastic rasper.Ensure butt

joints between successive drops are fine and level. Wherever Smery joints are aligned with Pixel perforations ensure to block/close the perforations by using Seam AJC to achieve

smooth surface below the joints. Smery is finished with approved colour water base acrylic paint by using roller brush. Paint a second finishing coat on the Smery when the first

coat is dry. The system is backlined with the acoustical infill SynthPF 10x25.

Technical Parameters

961.01 • Fire (Class) – A2-s1, d0

961.02 • Acoustics – NRC upto 0.75


961.04 • Climate (°C, RH) – 50, 70

961.05 • Light reflectance (%) – Paint dependent


Stage side & rear wall paneling

MAT Ebony 600x1200x20mm thk,kerfed edge

962.00 Supply and Installation of Mat Ebony, square edge, Magnesite bonded pinewood microfibre core pigmented ceiling tiles of size 600x1200x20mm, volume density 600Kgs/m3,

weight 12kg/m2 installed by using Strut framework system with non-visible fasteners using Strut H-Spline.Strut framework systems includes Strut CC50 Cross Channel having

thickness 0.7mm, length 3600mm,knurled web 50, depth 50mm and equal flanges 15mm is fastened to wall positioned horizontally in a regular manner at 600mm c/c. Strut H-

Spline having sectional thickness 2mm and length 2400mm to be fixed perpendicular to the Strut CC50 Cross Channel at 600mm centers. The Kerfed edge panels shall be then

inserted into the Strut H-spline along their long edges of 1200mm against framework to perfect fit with staggered short edges.The system is backlined with the acoustical infill

SynthPF 10x50 adhered to wall with Anutone stick S7.


962.01 • Fire (Class) – 1 & P


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

962.02 • Acoustics – NRC 0.65 (For 20mm C25 Mounting)

962.03 • Thermal conductivity (W/mk)– 0.1

962.04 • Climate (°C, RH) – 50, 90

962.05 • Light reflectance (%) – Low Light reflectivity


Hall side &rear wall paneling-lower reaches

Slats Surco 128x2440x16mm, T&G edge

963.00 Supply & installation of Salon Slats Surco made of pinewood E1 grade fiberboard, melamine laminated finish,groove perforated slats L8-2 - (2mm grooves @ 8mm centers) / L16-

2 - (2mm Slats @16mm pitch) / L32-2 - (2mm grooves @ 32mm centers) / L64-2 - (2mm grooves @ 64mm centers) / L128-2 - (2mm grooves @128mm centers),backlined with

Soundtexblack acoustical fleece, tongue-groove edge for a seamless look, 5-test fire retardant grade, size 128x2440x16mm, volume density of base board 800Kg/m3, weight

8Kgs/m2 (L16), 10.5Kgs/m2 (L32), 11Kgs/m2 (L64) installed by using Strut framework system. Strut framework system includes Strut CC10 aluminium core cross channel having

thickness 0.55mm,length 3600mm, knurled web 40mm, depth 10mm and equal flanges 15mm is fastened to wall or framework behind vertically/horizontally at every 600mm c/c.

strut CC18 aluminium core cross channel, thickness 0.5mm, length 2400mm, web 15mm & 27mm, depth 18mm and flanges of 7mm with suitable edge &centre brackets is then

fixed perpendicular to the Strut CC10 Cross channel with the help of fasteners at every 400mm centers. Slats Surco of size 128x 2440x16mm in then fixed perpendicular to CC18

with suitable edge & centre brackets.Short edges of the panel are staggered. Contractor to provide expansion joints of 3mm at every 4.88m length wise and 4.992m width

wise.Panels are backlined with SynthPF 10x25 held in position with dab spots of Anutone Stick S7


963.01 • Fire (Class) – 1 & P (For FR grade)

963.02 • Acoustics – NRC 0.77 (For E300* Mounting)


963.04 • Climate (°C, RH) – 50, 70

963.05 • Light reflectance (%) – 75 (Maple Arce)963.05 • Light reflectance (%) – 75 (Maple Arce)


Hall side &rear wall paneling-upper reaches

Soak Cord 600x2400x20mm, Kerfed edge

964.00 Supply and Installation of Soak Cord, square edge, fabric wrapped pinewood fiber panel of size 600x2400x20mm, density 400 kgs/m3, weight 8kg/m2 installed by using Strut

framework system with nonvisible fasteners using Anutone Strut H-Spline.The Strut framework systems includes Strut CC25 Cross Channel having thickness 0.55mm, length

3600mm, knurled web 35, depth 20mm and equal flanges 15mm is fastened to wall positioned horizontally in a regular manner at 600mm c/c. Strut H-Spline having sectional

thickness 2mm and length 2400mm to be fixed perpendicular to the Strut CC50 Cross Channel at 600mm centers. The Kerfed edge fabric wrapped panels shall be then inserted

into the Strut H-spline along their long edges of 2400mm against framework to perfect fit with staggered short edges. Note: Thickness is given for bare Panels, 4mm for cord fabric.

(fabric colour as approved by the architect basic cost of fabric is rs 700/smt).The system is backlined with the acoustical infill SynthPF 10x50 adhered on wall with Anutone Stick

S7.


964.01 • Fire (Class) – 1 & P

964.02 • Acoustics – NRC 0.95 (For 25mm C50 Mounting)

964.03 • Thermal conductivity (W/mk)– 0.08

964.04 • Climate (°C, RH) – 50, 90

964.05 • Light reflectance (%) – colour dependant


Carpet Flooring


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

965.00 Supplying and installation of Auditorium chairs : Wipro Symhony Model , Model Code : BSY00978499990 Specification :Push back with Fluimatic slider mechanism . Auto

Tip-up seat, chair fixed to the floor, seat and back wrapped with fire retardent fabric ,heavy duty 100 % poyester dyed yarn with 3mm + .5mm foam backing resultatent. Seat height

from floor level should be 450 mm ( 10 mm tolerence) , Arm rest height from floor level should be 574 mm ( 10 mm tolerence) , overall Depth of the chair should be 700 mm (10

mm tolerence) and height of the back from floor level should be 1030 mm (10 mm tolerence) in normal position and depth of the chair should be 920 mm (10 mm tolerence) and

height of the back from floor level should be 939 mm ( 10 mm tolerence) in push back position . Foam Density: 50 + 5 Kg/M3 / JIS K 6401, Constant Compression Set: (Max. 13%)

JIS K 6401, Back and cushion frame of ERW Tube / IS :307 1976 GRADE For Auto Tip-up – Torsion Spring / Spring Steel IS : 4454 1981 GRADE ,Back & Cushion Housing

PPCP IS: 10915 1994./ Injection Molded/Thermoform Plastic, Arm-rest to Arm-rest (center dist.): 21-22’’ (inches), Arm-rest of wooden polished Arm rest with skin integral pad/or

skin integral Armrest. All sheet metal parts with powder coated ,available with writing pad with foldable mechanism . Fabric for seat and back should be 100% polyster texured

Dyed Yarn, 275 GPM, 1.5 mm thickness with 4 mm foam backing, abrasion 15000 cycles, Flammability : BS 3119, ASTMD 1230 :1994 BS 5852 , Tear strength above 4000 gf,

breaking strength 100 KGF with high abrasion Seat numbering on back and tip-up portion, Provision for lights on sides for seats along the aisles, side WING COMPONENTS

:HRCA / CRCA Sheet Metal / IS :1079 1994 a) Wing frame ‘ C ‘Channel or Rectangular Frame b) Side wing frame with plywood. with upholstery.

Each 750.00 10593.22 7944915.00

966.00 Supply and fixing of KALZIP 65/400 “SELF SUPPORTED” SECRET FIX STANDING ROOFING SYSTEM IN 0.9mm THICK AA 3004 ALUMINIUM ALLOY. The general roof-

construction shall comprise from bottom to top:

Steel Liner – Kalbau (Kalzip) 35/200 Colour coated Galvalume steel liner sheet, 0.5 mm tct 1000 mm total cover width x 35 mm deep ribs spanning up to 1200mm centres

(multiple spans).

Vapour Control Layer – A single layer of double-sided aluminium foil/ Polyethylene Film .

Clips – The aluminium clips must be used to fix aluminium sheets to the substructure. Appropriate non penetrative clips to be used, with help of SS 304 screws

Insulation - A layer of Rockwool insulation of 100mm thickness minimum 60 kg/m3 density with thermal conductivity (K) =0.040 W/mk at 25 degree Celsius. Fire classification with

test procedures to BS 476: Parts 6 & 7.

Top layer – Kalzip 65/400 profiled straight sheeting manufactured from Aluminium self-supported standing seam roof system manufactured from Aluminium alloy AA 3004

(AlMn1Mg1 ) as specified in BS EN 1396 :2015), minimum material thickness of 0.9 mm and PVDF finish on the exposed surface. (std.colour RAL 9006/9010/9007) . The material (AlMn1Mg1 ) as specified in BS EN 1396 :2015), minimum material thickness of 0.9 mm and PVDF finish on the exposed surface. (std.colour RAL 9006/9010/9007) . The material

properties shall be as follows:

Ultimate tensile strength: minimum 200 N/mm2, 0.2% Proof Stress: min 185 N/mm2, Modulus of elasticity: 70,000 N/mm2

The roll formed panels and adjoining panels shall be machine zipped for interlocking. The aluminium roof elements will be supported by and joined longitudinally with an electrically

operated closure machine over concealed aluminium clips integrated into the longitudinal element flange thereby allowing for the possibility of transmitting reaction forces resulting

from positive and/or negative loads and also accommodating unobstructed thermal movements resulting from the specified ambient temperature range.

Note: The structure/purlins should be paid in relevant item. Sqm 4052.00 5880 23825760.00

967.00 Flashing: will be formed from 0.9mm thick coil, same as that used for Kalzip panels. ( max girth 578 mm) as per site requirement meter 100.00 1550 155000.00

968.00 ALUMINUM WELDING as per site requirement meter 450.00 1100 495000.00

BUILDING MANAGEMENT SYSTEM

Design, Supply, Erection, Testing and Commissioning of BMS Systems with following complete as required.

969.00 BMS Monitoring Hardwares

969.01 Central Server : Intel XEON Based CPU, Quad Core. 16 GB RAM, 1TB HDD, Pre Loaded with OS, Database, Firewall and AntiVirus, DVD RW and Complete with 19 Inch Rack

Mouting Capability No. 1.00 400000 400000.00

969.0250" colour, Flat Screen Type Professional CCTV Surveillance HD LED thin bezel 3.5 mm with 4 K resolution monitor 100-230 VAC 50 Hz, 24x7 with wall mounted swivel stand

No. 1.00 55000 55000.00

969.03 600 dpi or better A4 size lazer colour printer No. 1 8000 8000.00


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

970.00 BMS Software and Application Modules

970.01 BMS Main Server Software capable of Control & Monitoring all BMS Data having a Multi-Protocol Compatible Front End which can Support Bacnet ONLY Natively. The BMS

Software should be Web Enabled and must be Capable of Integrating to all Third Party Applications as Mentioned Below. All Licenses and Points to be Considered as per IO

Summay and as per the Requirement of Third Party Application Integration License 1 1250562 1250562.00

Shall have Real Time Trending

Shall have basic Energy Dash Boards

Shall have basic Analytics

Shall have 2D Dynamic Templates for utility equipments

970.02 BMS Communication Module for E-Mail and SMS Alert Notification and BMS Software customization for providing reports / MIMCS / Alarm / Trend / History formats to client's

satisfaction developed on the core BMS Server Module License 1 285882 285882.00

EASYSTACK / DELTA LOYTEC / FLEMENCOTECH

971.00 Middleware & Integrators for Soft Points

971.01 Open Protocol Output Integrators compatible for BACNET/MODBUS output meeting Vendor's communication platform to Acquire data and Control Operation of following

Equipment / Hardwares complete with enclosure duly internally wired and tested OEM supplied UL Listed

971.02 VRF Unit Over Bacnet IP (price Included in above software)

971.03 DG Set Over Modbus RS 485 Set 1 113196 113196.00

971.04 Solar Panel Over Modbus RS 485 Set 1 113196 113196.00

971.05 Lifts Over Modbus RS 485 Set 1 113196 113196.00

971.06 UPS Over Modbus RS 485 Set 1 113196 113196.00

971.07 Fire Alarm Bacnet IP Over Modbus RS 485 (price Included in above software)971.07 Fire Alarm Bacnet IP Over Modbus RS 485 (price Included in above software)

971.08 Chiller Over Modbus RS 485 Set 1 113196 113196.00

EASYSTACK / DELTA / FLEMENCOTECH

972.00 IP based DDC Controller and hardware: Supply, installation, testing, commissioning of

972.01 Onboard IP Programable Automation controllers as specified with 32 bit microprocesser supporting BACnet on IP , Ethernet communication platform designed for the required IO

paramteres and housed in IP 55 MS powder coated panel duly internally wired and tested. Panels quantity shall be based on Loaction to accomodate one or more following DDC

Controllers with UL Listed Power Supply.

IO summary of this tender is for base reference and BMS vendor shall ensure completeness of control/monitoring functionality of equipments mentioned therein while offering their

DDC Hardware

972.02 Chiller Plant Manegar DDC Set 1 478018 478018.00

972.03 CSU DDC Set 14 100355.14 1404972.00

972.04 Floor Mount AHU DDC Set 3 48322 144966.00

972.05 TFA DDC Set 9 48331.78 434986.00

972.06 Tank Level Switch Set 1 183594 183594.00

EASYSTACK / DELTA / FLEMENCOTECH

973.00 Field Devices duly wired to DDC: supply, installation with all required fixtures, calibration, testing and commissioning

973.01 Field Sensors

973.02 Air DP Switch with required weldolet / couplings Nos. 27 3680 99360.00

973.03 Strobe cum Sounder Nos. 1 4120 4120.00

973.04 Duct type Temperature sensor Nos. 27 2660 71820.00

973.05 Duct mounted Air Static Pressure sensor Nos. 27 15900 429300.00

973.06 Absolute Water Pressure Transmitter Nos. 3 18240 54720.00

973.07 CO2 sensors Nos. 9 28240 254160.00

973.08 Level Switch Nos. 15 7660 114900.00

973.09 Immersion type Temperature Sensor Nos. 27 6780 183060.00


S.

No.


1 2 3 30 31 34

UNIQ No. BLDG. No.

GREYSTONE / DWAYER / OMICRON

974.00 Cabling and Conduits

974.01 Annealed Bare Copper muiltistranded conductor, PVC insulated, Aluminum Mylar screened, 0.5 Sq.mm ATC drain wire, PVC sheathed Instrumentation flexible Cable.

974.02 2Cx1.0 sq. mm Unscreened Mtrs 500 40 20000.00

974.03 1Px1.0 sq. mm Screened Mtrs 10000 48 480000.00

974.04 2P x 1.0 Sq mm Screened Mtrs 4000 90 360000.00

974.05 8C x 1.0 Sq mm Unscreened Mtrs 500 120 60000.00

974.06 4P x 1.0 Sq mm Screened Mtrs 300 130 39000.00

975.00 Supply and installation LAN Network with 2 LAYER Managed Switches & CAT - 6 cable with RJ 45 Jacks, Patch chords, all other accessories

975.01 12 port layer 2 switch with 10/100/1000 Managed Switches with IP multicast snooping and data-driven IGMP support and with 2 x 1000 baseT FO uplink ports and all related

termination accessories as per vendor specific System requirement. Nos. 4 90000 360000.00

HP / ALLIED TELESYS / JUNIPER

975.02 Cat-6 cable with required terminations as required with Cable tie's. (1 box - 305 mtr) Box 5 12000 60000.00

STERLITE/AMP/SYSTEMAX/CENTURY

976.00 Supply & Laying of following size 2mm thick rigid MS conduits.Rate shall include wall chasing & rough plastering, clamping / fixing arrangement.

976.01 32 mm Mtr 2500 130 325000.00

976.02 25 mm Mtr 2500 100 250000.00

976.03 19 mm Mtr 1800 95 171000.00

976.04 Flexible MS conduit 32 mm Mtr 1000 110 110000.00



977.00 PROFAB / ADARSH / ASIAN / ADITYA STEEL977.00 PROFAB / ADARSH / ASIAN / ADITYA STEEL

977.01 42 U Rack to accommodate all above equipment with closed from 2 sides with 2 exhaust fans, powder coated complete Mtr 2.00 45000 90000.00

WALRACK / SKYNET / WQ

TOTAL 2859149596.25

ADD 12 % GST 12% 343097951.55

TOTAL 3202247547.80

ADD 1% LABOUR CESS 1% 32022475.48

TOTAL 3234270023.28


priced schedule for items and quantities for the work … · s. no. description of item unit total...

Documents