price list e5 - aliaxis-ui.ataliaxis-ui.at/wp-content/uploads/2017/05/e5.15-pp-h-fittings-sw... ·...

PRICE LIST E5.15PP-H FITTINGS AND VALVES

Since 1954 FIP produces injection moulded valves and fittings in thermopla-stic materials for pressure pipeline systems thus becoming nowadays the lar-gest European valves manufacturer. FIP is a company of the Aliaxis Group: a worldwide industrial holding, ga-thering together a series of companies manufacturing and marketing plastic plumbing products for building, industrial and public utilities applications. FIP products are manufactured on EU production sites, operating to the Quality Assurance System in compliance with ISO 9001 and with the Environmental Management System ISO 14001 standards requirements.Moulded in FIP products there are over 50 years of know-how powered by a strong quest for innovation.

Company Certificates

Cert. N° 1 in compliance with the Standard UNI EN ISO 9001

Cert. N° 70 in compliance with the Standard UNI EN ISO 14001

CE Conformity

CE conformity according to European directives EC/2104/68.

R00-02-2017

Product managerPVC-U Manual & Actuated valves - Lucia Cambiaso Tel. +39 010 9621 266

PVC-C Manual & Actuated valves - Mauro Nobile Tel. +39 010 9621 414

PP-H & PVDF Manual & Actuated valves- Silvia Porcile Tel. +39 010 9621 267

Variable area flowmeters - Alberto Claveri Tel. +39 010 9621 340

PVC-U & PVC-C fittings - Mauro Nobile Tel. +39 010 9621 414

PE, PP-H & PVDF fittings - Silvia Porcile Tel. +39 010 9621 267

PP Compression fittings MAGNUM System& Clamp saddles - Stefano Carrea Tel. +39 010 9621 255

Technical Support [email protected]

2

PP-HFITTINGS

AND VALVES

INDEXGeneral info

How to read FIP Valves Commercial CodesHow to read FIP Fittings Commercial CodesReference standardsApprovals and quality marks

page 4page 6page 8page 10

ISO-UNI FITTINGS

Fittings for socket welding - Equal socketFittings for socket welding - CapFittings for socket welding - UnionsFittings for socket welding - ReducersFittings for socket welding - StubsFittings for socket welding - Hose adaptorFlanges - ISO-DIN seriesFlanges - ANSI series

page 12page 14page 15page 17page 18page 19page 20page 21

ISO-BSP FITTINGS

Adaptor for socket weldingAdaptor for socket welding - UnionsAdaptor for socket welding - Brass Union EndsAdaptor for socket welding - SS A316L Union Ends

page 23page 24page 27page 28

BALL VALVES

VKD DN 10÷50 - DUAL BLOCK® 2-way ball valveVKD DN 65÷100 - DUAL BLOCK® 2-way ball valveVKR DN 10÷50 - DUAL BLOCK® regulating ball valveTKD DN 10÷50 - DUAL BLOCK® 3-way ball valveSR DN 15÷50 - Ball check valve

page 29page 35page 39page 45page 48

BUTTERFLY VALVES

FK DN 40÷400 - Butterfly valve page 50

DIAPHRAGM VALVES

DK DN 15÷65 - DIALOCK® 2-way diaphragm valveVM DN 80÷100 - Diaphragm valveCM DN 12÷15 - Compact diaphragm valve

page 58page 63page 66

OTHER VALVES

RV DN 15÷100 - Sediment strainerVR DN 15÷80 - Check valve

page 70page 72

CONNECTIONS

Connections for ball and angle seat valvesSpare end connectors for true union diaphragm valves

page 74page 79

Packaging InformationConditions of supply

page 81page 82

3

FKVALVE MODEL

OCONNECTION STD.

CMATERIALS

VKD ball 2-way DUAL BLOCK® I ISO socket (metric) A ABS

TKD ball 3-way DUAL BLOCK® T D ISO spigot (metric) C PVC-C

LKD portball 3-way DUAL BLOCK® L B ISO butt welding (metric) F PVDF

VKR regulating ball 2-way DUAL BLOCK® BE PE100 ISO butt welding (metric) M PP-H

VXE ball 2-way Easyfit G JIS socket threaded (metric) V PVC-U

VEE ball 2-way Easyfit P Hose adaptor (metric) T PVC-U Transparent

SXE ball spring check valve Easyfit F BSP female threaded (inch)

FK butterfly multi-purpose R BSP male threaded (inch)

FE butterfly water L BS female (inch)

DK diaphragm DIALOCK” M BS male (inch)

VM diaphragm A ASTM socket (inch)

CM compact diaphragm Y ASTM spigot (inch)

CMU unionised compact diaphragm N NPT socket threaded (inch)

DKD direct acting diaphragm (only pneumatically actuated) J JIS socket (inch)

DKDU unionised direct acting diaphragm (only pneumatically actuated) O ISO-DIN flanged (metric)

DKM diaphragm act. diaphragm OA ANSI 150 flanged (inch)

DKP piston act. diaphragm (onlypneumatically actuated) OL LUG ISO-DIN (mm) flanged

DKPU unionised piston actuator diaphragm (only pneumatically actuated) OAL LUG ANSI 150 (inch) flanged

RM diaphragm cock

RP piston cock

RV strainer

RVU unionised strainer

VR piston check valve

VRU unionised piston check valve

VV angle seat valve

VVU unionised angle seat valve

SR ball check valve

VZ foot valve

VA air release valve

SV pressure relief valve

CR wafer check valve

Ex: FKOCRM315F FK butterfly valve, PVC-C disc, gear box, d 315, FPM gasket

CODESHOW TO READ FIP VALVES COMMERCIAL CODES

4

RMCOMMAND SYSTEM

315 SIZE

FSEAL

MATERIALMETRIC SERIES d (mm) INCH SERIES d/R (inches)SHX handle block (for VKD ball valves) 006 6 E EPDM

LM lever (for butterfly) 008 8 F FPM

RM gear box (for butterfly) 010 10 N NBR

FM bare shaft (for butterfly) 012 12 014 1/4” P PTFE

NC Pneumatic Normally Closed 016 16 038 3/8”

NO Pneumatic Normally Open 020 20 012 1/2”

DA Pneumatic Double Acting 025 25 034 3/4”

SA Pneumatic Single Acting 032 32 100 1”

EA Electric 230V AC 040 40 114 1” 1/4

EB Electric 115V AC 050 50 112 1” 1/2

EE Electric 24V AC 063 63 200 2”

EF Electric 24V DC 214 2” 1/4

EI Electric 400V trifase 075 75 212 2” 1/2

EM Electric 90-240V AC 234 2” 3/4

EL Electric 24V AC/DC 090 90 300 3”

110 110 400 4”

125 125

140 140 500 5”

160 160 600 6”

180 180

200 200

225 225 800 8”

250 250

280 280 810 10”

315 315 812 12”

355 355 814 14”

400 400 816 16”

5

BTYPE OF FITTINGS

IJOINT SYSTEM

VMATERIALS

A Hose connector C Cieco C PVC-C

B Socket union F BSP female threaded (inch) E PE

C End cap G JIS socket threaded (inch) F PVDF

D Reducer bush I ISO socket (metric) M PP-H

E Nut M BS male (inch) V PVC-U

F Fixed flange P Hose adaptor (metric) B PP-steel

F/B Union bush R BSP male threaded (inch) O Brass

G 90° elbow B ISO butt welding (metric)

H 45° elbow D ISO spigot (metric)

J Back nut A ASTM socket (inch)

K Transition fitting

L Tank connector

M Socket

N Nipple

NR Reduced nipple

O Free flange

P Plug

Q Collars

Q/B Union end connector

R Reduction

S 90° bend

T 90° tee

TR 90° tee with reduced offtake

U Clamp saddles

Z Pipe clips

Y 45° tee

X Cross

Ex: BIV050E PVC-U union, d50, socket for solvent welding, EPDM gasket

HOW TO READ FIP FITTINGS COMMERCIAL CODESCODES

6

050 SIZE

ESEAL MATERIAL

METRIC SERIES d (mm) INCH SERIES d/R (pollici)006 6 E EPDM

008 8 F FPM

010 10 N NBR

012 12 014 1/4” P PTFE

016 16 038 3/8”

020 20 012 1/2”

025 25 034 3/4”

032 32 100 1”

040 40 114 1” 1/4

050 50 112 1” 1/2

063 63 200 2”

214 2” 1/4

075 75 212 2” 1/2

234 2” 3/4

090 90 300 3”

110 110 400 4”

125 125

140 140 500 5”

160 160 600 6”

180 180

200 200

225 225 800 8”

250 250

280 280 810 10”

315 315 812 12”

355 355

400 400

7

REFERENCE

• ANSI B16.5 cl.150 Pipe, flanges and stubs - NPS 1/2 to NPS 24 mm / inch.• ASTM D 4101-06 Polypropylene compound according to the classification PP0110B56000.• BS 10 Specification for flanges and bolts for pipes, valves and fittings.• BS 1560 Flanges for pipes, valves and fittings (Class designated). Steel, cast iron

and copper alloy flanges. Specification for steel flanges. • BS 4504 Flanges for pipes, valves and fittings (PN designated).• DIN 2501 Flanges, dimensions.• DIN 2999 Whitworth thread for threaded pipes and fittings.• DIN 8077-8078 PP-H pipe dimensions, metric series.• DIN 16962 PP-H fittings for socket and butt welding, dimensions.• DIN 16963 Pipe joints and pipe components for pressurised fluids in HDPE.• DVS 2202-1 Imperfections of PP-H welded joints, characteristics, descriptions and

evaluations.• DVS 2207-11 Socket and butt welding of PP-H components.• DVS 2208-1 Machinery and equipment for thermocouple welding pipes, pipe parts and

panels.• EN 558-1 Industrial valves - Overall dimensions of metal valves for use in flanged

pipe systems - Part 1: PN designated valves• EN 1092-1 Flanges and their joints - Circular flanges for pipes, fittings, valves and

accessories - Part 1: Steel flanges, PN designated.• EN ISO 15494 Specifications for components (Pipes, Fittings and Valves) in PP-H for

industrial applications.• ISO 228-1 Pipe threads for connections that do not seal in the thread.• ISO 5211 Part-turn actuator couplings.• ISO 7005-1 Metal flanges; part 1: steel flanges.

STANDARDSProduction of the PP-H (100) lines is carried out according to the highest quality standards and in full compliance with the environmental restrictions set by the applicable laws in force and in accordance with ISO 14001. All products are made in accordance with the quality guarantee system in compliance with ISO 9001.

8

• JIS B 2220 Steel pipe flanges.• UNI 11318 Socket welding of PP-H components.• UNI 11397 Butt welding of PP-H components.

9

E5.

15

APPROVALS AND

• DIBt FIP PP-H valves have been tested and certified by DIBt (Deutsches Institut

für Bautechnik)

• GOST-R - EAC FIP PP-H valves are GOST-R and EAC certified in accordance with Russian

regulations on Safety, Hygiene and Quality

• RINA FIP PP-H valves have been recongnised as suitable for conveying, treating

domestic and air conditioning waters on board ships and other units clas-sified by RINA.

• TA-Luft FIP PP-H valves have been tested and certified according to “TA-Luft” by

MPA Stuttgart in compliance with the Technical Instruction on Air Quality Control TA-Luft/ VDI 2440

• UKR SEPRO FIP PP-H valves and fittings are certified in accordance with Ukrainian reg-

ulations on Safety and Quality

QUALITY MARKS

TA-Luft

10

11

E5.

15

Technical specificationsSize range d 20 ÷ d 110 (mm)Nominal pressure PN 10 with water at 20° CTemperature range 0 °C ÷ 100 °CCoupling standards Welding: EN ISO 15494.

Can be coupled to pipes according to EN ISO 15494

Flanging system: ISO 7005-1, EN 1092-1, EN ISO 15494, DIN 2501, ANSI B16.5 cl.150

Reference standards Construction criteria: EN ISO 15494Test methods and requirements: EN ISO 15494Installation criteria: DVS 2202-1, DVS 2207-11,DVS 2208-1, UNI 11318

Fitting material PP-HSeal material EPDM, FPM

FITTINGS

Series of fittings designed forconveyingfluids under pressure with a hot weld connection system (socket welding).

FITTINGS FOR SOCKET WELDING, METRIC SERIES

ISO-UNI

12

GIMElbow 90° for socket welding

d DN PN Code € pack n./box

box type

20 15 10 GIM020 2,24 10 160 04

25 20 10 GIM025 2,63 10 160 04

32 25 10 GIM032 3,19 10 100 04

40 32 10 GIM040 4,05 5 50 04

50 40 10 GIM050 7,46 5 30 04

63 50 10 GIM063 9,70 2 16 04

75 65 10 GIM075 20,16 - 8 04

90 80 10 GIM090 24,79 - 6 04

110 100 10 GIM110 37,20 - 4 04

TIMEqual Tee 90° for socket welding


box type

20 15 10 TIM020 2,63 10 160 04

25 20 10 TIM025 2,92 10 100 04

32 25 10 TIM032 3,39 10 60 04

40 32 10 TIM040 4,36 5 40 04

50 40 10 TIM050 7,78 5 20 04

63 50 10 TIM063 9,93 2 20 03

75 65 10 TIM075 23,05 - 8 04

90 80 10 TIM090 37,20 - 8 03

110 100 10 TIM110 47,20 - 4 03

ISO-UNI FITTINGSPP-HFITTINGS FOR SOCKET WELDING - EQUAL SOCKET

13

E5.

15

HIMElbow 45° for socket welding


box type

20 15 10 HIM020 3,19 10 300 04

25 20 10 HIM025 3,39 10 160 04

32 25 10 HIM032 4,18 10 100 04

40 32 10 HIM040 5,80 5 60 04

50 40 10 HIM050 7,46 5 30 04

63 50 10 HIM063 9,93 2 16 04

75 65 10 HIM075 23,05 - 12 04

90 80 10 HIM090 31,80 - 6 04

110 100 10 HIM110 46,49 - 4 04

MIMDouble socket, plain socket for socket welding


box type

20 15 10 MIM020 1,54 10 300 04

25 20 10 MIM025 1,77 10 240 04

32 25 10 MIM032 2,03 10 120 04

40 32 10 MIM040 2,45 5 90 04

50 40 10 MIM050 4,66 5 60 04

63 50 10 MIM063 7,08 2 32 04

75 65 10 MIM075 9,86 - 24 04

90 80 10 MIM090 14,09 - 12 04

110 100 10 MIM110 22,10 - 8 04

ISO-UNI FITTINGSPP-H

FITTINGS FOR SOCKET WELDING - EQUAL SOCKET

14

CIMEnd cap for socket welding


box type

20 15 10 CIM020 2,03 10 300 04

25 20 10 CIM025 2,03 10 240 04

32 25 10 CIM032 2,51 10 120 04

40 32 10 CIM040 2,97 5 90 04

50 40 10 CIM050 4,25 5 45 04

63 50 10 CIM063 5,47 2 32 04

75 65 10 CIM075 10,03 - 24 04

90 80 10 CIM090 11,60 - 12 04

110 100 10 CIM110 16,06 - 8 04

ISO-UNI FITTINGSPP-HFITTINGS FOR SOCKET WELDING - CAP

15

E5.

15

BIGMSocket union with plain end for socket welding EPDM or FPM O-ring

d DN R1 PN EPDM code € FPM

code € pack n./box

box type

20 15 1" 10 BIGM020E 8,76 BIGM020F 10,17 10 80 04

25 20 1"1/4 10 BIGM025E 9,70 BIGM025F 11,13 10 60 04

32 25 1"1/2 10 BIGM032E 11,13 BIGM032F 13,17 10 40 04

40 32 2" 10 BIGM040E 14,09 BIGM040F 17,65 2 32 04

50 40 2"1/4 10 BIGM050E 20,11 BIGM050F 24,79 2 24 04

63 50 2"3/4 10 BIGM063E 28,69 BIGM063F 34,18 2 12 04

EFGMPP-GR Union nut with BS parallel threads for BIGM, BIFGM, BIFOM, BIROM, BIFXM, BIRXM unions

R d BIGM PN Code € pack n./box

box type

1" 20 10 EFGM100 4,23 - - -

1"1/4 25 10 EFGM114 4,37 - - -

1"1/2 32 10 EFGM112 5,06 - - -

2" 40 10 EFGM200 6,47 - - -

2"1/4 50 10 EFGM214 10,03 - - -

2"3/4 63 10 EFGM234 16,19 - - -


FITTINGS FOR SOCKET WELDING - UNIONS

16

Q/BIGMPP-H Union end for socket welding


box type

20 15 10 QBIGM020 2,42 - - -

25 20 10 QBIGM025 2,45 - - -

32 25 10 QBIGM032 2,60 - - -

40 32 10 QBIGM040 3,22 - - -

50 40 10 QBIGM050 3,86 - - -

63 50 10 QBIGM063 4,10 - - -

F/BIGMPP-H Union bush for socket welding

d DN R1 PN Code € pack n./box

box type

20 15 1" 10 FBIGM020 4,31 - - -

25 20 1"1/4 10 FBIGM025 4,72 - - -

32 25 1"1/2 10 FBIGM032 5,42 - - -

40 32 2" 10 FBIGM040 7,08 - - -

50 40 2"1/4 10 FBIGM050 10,04 - - -

63 50 2"3/4 10 FBIGM063 13,33 - - -

ISO-UNI FITTINGSPP-HFITTINGS FOR SOCKET WELDING - UNIONS

17

E5.

15

RIMReducer: male spigot for socket welding (d) and female socket for socket welding (d1)

d x d1 PN Code € pack n./box

box type

25 x 20 10 RIM025020 2,17 10 240 04

32 x 20 10 RIM032020 2,63 10 160 04

32 x 25 10 RIM032025 2,63 10 160 04

40 x 25 10 RIM040025 3,13 10 100 04

40 x 32 10 RIM040032 3,13 10 100 04

50 x 32 10 RIM050032 4,05 5 80 04

50 x 40 10 RIM050040 3,97 5 80 04

63 x 32 10 RIM063032 4,72 5 40 04

63 x 50 10 RIM063050 4,85 5 40 04

75 x 50 10 RIM075050 8,66 - 24 04

75 x 63 10 RIM075063 8,66 - 24 04

90 x 63 10 RIM090063 12,07 - 24 04

90 x 75 10 RIM090075 11,86 - 24 04

110 x 63 10 RIM110063 16,54 - 10 04

110 x 90 10 RIM110090 17,08 - 6 04


FITTINGS FOR SOCKET WELDING - REDUCER

18

QRNMStub Flange DIN for socket welding, with serrated face to be used with ODB


box type

20 15 10 QRNM020 3,74 10 360 04

25 20 10 QRNM025 3,91 10 180 04

32 25 10 QRNM032 4,23 10 100 04

40 32 10 QRNM040 5,21 5 70 04

50 40 10 QRNM050 6,09 5 100 03

63 50 10 QRNM063 7,57 2 30 04

75 65 10 QRNM075 16,36 - 24 04

90 80 10 QRNM090 25,84 - 12 04

110 110 10 QRNM110 35,77 - 12 04

QRAMStub Flange for socket welding for OAB ANSI B16.5 cl.150 backing rings (for other dimensions, use QRNM)

d DN PN OAB size Code € pack n./box

box type

25 20 10 3/4" QRAM034 4,66 10 100 04

32 25 10 1" QRAM100 5,06 10 100 04

40 32 10 1"1/4 QRAM114 6,34 5 70 04

50 40 10 1"1/2 QRAM112 7,31 5 100 03

90 80 10 3" QRAM300 31,02 - 12 04

ISO-UNI FITTINGSPP-HFITTINGS FOR SOCKET WELDING - STUBS

19

E5.

15

AIMHose adaptor, male spigot for socket welding

d x P2 x P1 DN Code € pack n./box

box type

20 x 22 x 20 15 AIM020022020 2,29 10 300 04

25 x 27 x 25 20 AIM025027025 2,92 10 200 04

32 x 32 x 30 25 AIM032032030 3,54 10 120 04

40 x 42 x 40 32 AIM040042040 6,13 5 100 03

50 x 52 x 50 40 AIM050052050 7,65 5 20 04

63 x 64 x 60 50 AIM063064060 8,51 5 20 04


FITTINGS FOR SOCKET WELDING - HOSE ADAPTOR

20

ODBacking ring in PP/FRP black with steel core according to EN/ISO/DIN to be used with stub flange QRNM. Drilled: PN 16 up to DN 100

d DN *PMA (bar) Code € pack n./box

box type

20 15 16 ODB020 See EB price list - - -







**90 80 16 ODB090 See EB price list - - -

***125 100 16 ODB125 See EB price list - - -

* PMA: maximum allowable pressure** to be used with FIP stub flange QRNM090*** to be used with FIP stub flange QRNM110

ODBCBacking ring in PP/FRP black with steel core according to EN/ISO/DIN to be used with stub flange QRNM. Drilled: PN16 up to DN 100

d DN *PMA (bar) Code € pack n./box

box type

20 15 16 ODBC020 See EB price list - - -








110/125 100 16 ODBC110 See EB price list - - -

*PMA: maximum allowable pressure

ISO-UNI FITTINGSPP-HFLANGES - ISO-DIN SERIES

21

E5.

15

OABBacking ring ANSI B16.5 cl.150 in PP/FRP with steel core for stub flange QRAM

d (inch) DN *PMA (bar) Code € pack n./box

box type

1/2" 15 16 OAB012 See EB price list - - -

3/4" 20 16 OAB034 See EB price list - - -

1" 25 16 OAB100 See EB price list - - -

1"1/4 32 16 OAB114 See EB price list - - -






* PMA: maximum allowable pressure

OABCBlind flange ANSI B16.5 cl.150 in PP/FRP grey with steel core

d (inch) DN *PMA (bar) Code € pack n./box

box type

1/2" 15 16 OABC012 See EB price list - - -

3/4" 20 16 OABC034 See EB price list - - -

1" 25 16 OABC100 See EB price list - - -

1"1/4 32 16 OABC114 See EB price list - - -






*PMA: maximum allowable pressure


FLANGES - ANSI SERIES

22

Technical specificationsSize range d 20 ÷ 63 (mm); R 3/8” ÷ 2”Nominal pressure PN 10 with water at 20° CTemperature range 0 °C ÷ 100 °CCoupling standards Welding: EN ISO 15494.

Can be coupled to pipes according to EN ISO 15494Thread: ISO 228-1, DIN 2999

Reference standards Construction criteria: EN ISO 15494Test methods and requirements: EN ISO 15494

Installation criteria: DVS 2202-1, DVS 2207-11, DVS 2208-1, UNI 11318

Valve material PP-HSeal material EPDM, FPM

Series of fittings designed for conveying fluids under pressure with a hot thread and weld connection system (socket welding).

FITTINGS

ADAPTORS FOR SOCKET WELDING

ISO-BSP

23

E5.

15

MIMMSocket coupling, one end plain socket for socket welding, the other one BS parallel socket threaded with reinforcing metal ring

d x R PN Code € pack n./box

box type

20 x 1/2" 10 MIMM020012 3,00 10 300 04

25 x 3/4" 10 MIMM025034 3,81 10 200 04

32 x 1" 10 MIMM032100 4,85 10 120 04

40 x 1"1/4 10 MIMM040114 5,80 5 70 04

50 x 1"1/2 10 MIMM050112 9,54 5 40 04

63 x 2" 10 MIMM063200 12,07 2 24 04

ISO-BSP FITTINGSPP-H

ADAPTOR FOR SOCKET WELDING

24

BIFGMSocket union, one plain end for socket welding, the other BS parallel threaded, with EPDM or FPM O-ring

d x R R1 PN EPDM code € FPM


box type

20 x 1/2 1" 10 BIFGM020012E 13,17 BIFGM020012F 15,41 10 80 04

25 x 3/4 1"1/4 10 BIFGM025034E 14,48 BIFGM025034F 16,61 10 60 04

32 x 1" 1"1/2 10 BIFGM032100E 15,18 BIFGM032100F 18,13 10 40 04

40 x 1"1/4 2" 10 BIFGM040114E 23,68 BIFGM040114F 30,11 2 32 04

50 x 1"1/2 2"1/4 10 BIFGM050112E 34,64 BIFGM050112F 42,98 2 24 04

63 x 2" 2"3/4 10 BIFGM063200E 39,79 BIFGM063200F 47,20 2 12 04

BIFOMSocket union, one PP-H end socket for socket welding, the other Brass BS parallel female threaded, with EPDM O-Ring

d x R R1 PN EPDM code € pack n./

boxbox

type20 x 1/2" 1" 10 BIFOM020012E 15,43 40 80 05

25 x 3/4" 1"1/4 10 BIFOM025034E 18,82 16 32 05

32 x 1" 1"1/2 10 BIFOM032100E 23,53 10 20 05

40 x 1"1/4 2" 10 BIFOM040114E 29,01 8 16 05

50 x 1"1/2 2"1/4 10 BIFOM050112E 37,47 4 8 05

63 x 2" 2"3/4 10 BIFOM063200E 48,65 - 12 05

ISO-BSP FITTINGSPP-HADAPTOR FOR SOCKET WELDING - UNIONS

25

E5.

15

BIROMSocket union, one PP-H end socket for socket welding, the other Brass BS parallel male threaded, with EPDM O-Ring

d x R R1 PN EPDM code € pack n./

boxbox

type20 x 1/2" 1" 10 BIROM020012E 17,37 35 70 05

25 x 3/4" 1"1/4 10 BIROM025034E 20,99 15 30 05

32 x 1" 1"1/2 10 BIROM032100E 26,98 8 16 05

40 x 1"1/4 2" 10 BIROM040114E 35,59 8 16 05

50 x 1"1/2 2"1/4 10 BIROM050112E 43,84 4 8 05

63 x 2" 2"3/4 10 BIROM063200E 56,51 - 10 05

BIFXMSocket union, one PP-H end plain socket for socket welding, the other Stainless Steel A316L BS parallel female threaded, with EPDM or FPM O-Ring



box type

20 x 1/2" 1" 10 BIFXM020012E 66,12 BIFXM020012F 67,52 40 80 05

25 x 3/4" 1"1/4 10 BIFXM025034E 80,36 BIFXM025034F 81,79 16 32 05

32 x 1" 1"1/2 10 BIFXM032100E 93,60 BIFXM032100F 95,64 14 28 05

40 x 1"1/4 2" 10 BIFXM040114E 113,14 BIFXM040114F 116,70 8 16 05

50 x 1"1/2 2"1/4 10 BIFXM050112E 124,07 BIFXM050112F 128,73 4 8 05

63 x 2" 2"3/4 10 BIFXM063200E 136,32 BIFXM063200F 141,81 - 12 05


ADAPTOR FOR SOCKET WELDING - UNIONS

26

BIRXMSocket union, one PP-H socket for socket welding, the other Stainless Steel A316L BS parallel male threaded, with EPDM or FPM O-Ring



box type

20 x 1/2" 1" 10 BIRXM020012E 74,39 BIRXM020012F 75,80 35 70 05

25 x 3/4" 1"1/4 10 BIRXM025034E 89,58 BIRXM025034F 91,02 15 30 05

32 x 1" 1"1/2 10 BIRXM032100E 107,39 BIRXM032100F 109,42 12 24 05

40 x 1"1/4 2" 10 BIRXM040114E 138,80 BIRXM040114F 142,38 8 16 05

50 x 1"1/2 2"1/4 10 BIRXM050112E 145,20 BIRXM050112F 149,87 4 8 05

63 x 2" 2"3/4 10 BIRXM063200E 158,38 BIRXM063200F 163,86 - 10 05

ISO-BSP FITTINGSPP-HADAPTOR FOR SOCKET WELDING - UNIONS

27

E5.

15

Q/BFOBrass Union end BS parallel threaded socket

R Code € pack n./box

box type

3/8" QBFO038 See E3 price list - - -



1" QBFO100 See E3 price list - - -

1"1/4 QBFO114 See E3 price list - - -

1"1/2 QBFO112 See E3 price list - - -

2" QBFO200 See E3 price list - - -

Q/BROBrass Union end BS parallel male threaded


box type

3/8" QBRO038 See E3 price list - - -



1" QBRO100 See E3 price list - - -

1"1/4 QBRO114 See E3 price list - - -

1"1/2 QBRO112 See E3 price list - - -

2" QBRO200 See E3 price list - - -


ADAPTOR FOR SOCKET WELDING - BRASS UNION ENDS

28

Q/BFXStainless Steel A316L Union end: BS parallel threaded socket


box type

3/8" QBFX038 See E3 price list - - -



1" QBFX100 See E3 price list - - -

1"1/4 QBFX114 See E3 price list - - -

1"1/2 QBFX112 See E3 price list - - -

2" QBFX200 See E3 price list - - -

Q/BRXStainless Steel A316L Union end: BS parallel male threaded


box type

3/8" QBRX038 See E3 price list - - -



1" QBRX100 See E3 price list - - -

1"1/4 QBRX114 See E3 price list - - -

1"1/2 QBRX112 See E3 price list - - -

2" QBRX200 See E3 price list - - -

ISO-BSP FITTINGSPP-HADAPTOR FOR SOCKET WELDING - SS A316L UNION ENDS

29

E5.

15

Technical specificationsConstruction 2-way True Union ball valve with locked carrier and

lockable union nutsSize range DN 10 ÷ 50Nominal pressure PN 10 with water at 20° CTemperature range 0 °C ÷ 100 °CCoupling standards Welding: EN ISO 15494.

Can be coupled to pipes according to EN ISO 15494Thread: ISO 228-1, DIN 2999Flanging system: ISO 7005-1, EN 1092-1, EN ISO 15494, EN 558-1, DIN 2501, ANSI B16.5 cl.150

Reference standards Construction criteria: EN ISO 16135, EN ISO 15494Test methods and requirements: ISO 9393Installation criteria: DVS 2202-1, DVS 2207-11, DVS 2208-1, UNI 11318Actuator couplings: ISO 5211

Valve material PP-HSeal material EPDM, FPM (standard size O-Rings);

PTFE (ball seats)

Control options Manual control; electric actuator; pneumatic actuator

VKD

FIP has developed aVKD DUAL BLOCK®2-WAY ball valveto introduce ahigh reference standard in thermosplastic valve design. VKD is a True Union ball valve that meets the most stringent needs required by industrial applications.

DUAL BLOCK® 2-WAY BALL VALVE

DN 10÷50

• Connection system for weld, threaded and flanged joints• Patented SEAT STOP® ball seat carrier system that lets you micro-adjust

ball seats and minimise axial force effects• Easy radial disassembly allowing quick replacement of O-rings and ball

seats without any need for tools• PN10 True Union valve body made for PP-H injection moulding equipped

with built-in bores for actuation. ISO 9393 compliant test requisites• Option of disassembling downstream pipes with the valve in the closed po-

sition• Floating full bore ball with high surface finish• Integrated bracket for valve anchoring• Ball seat carriers can be adjusted using the Easytorque adjustment kit

30

1 Ergonomic HIPVC handle equipped with removable tool to adjust the ball seat carrier

2 Handle lock 0°- 90° SHKD (available as an accessory) ergonomically operable during service and lockable

3 Robust integrated bracket for valve anchoring, for easy and quick automation even after valve installation on the system via the Power Quick module (optional)

4 DUAL BLOCK® patented lock system that ensures union nut tightening hold even in severe conditions such as vibrations or heat dilation

1

2

3

4

31

E5.

15

VKD DN 10÷50PP-H

VKDIMDUAL BLOCK® ball valve with metric plain socket ends for socket welding

d DN PN EPDM code € FPM


box type

16 10 10 VKDIM016E 37,33 VKDIM016F 45,10 1 22 03

20 15 10 VKDIM020E 37,44 VKDIM020F 45,15 1 22 03

25 20 10 VKDIM025E 44,19 VKDIM025F 52,35 1 10 03

32 25 10 VKDIM032E 54,57 VKDIM032F 66,75 1 10 03

40 32 10 VKDIM040E 67,62 VKDIM040F 81,24 1 8 03

50 40 10 VKDIM050E 87,53 VKDIM050F 103,25 1 8 03

63 50 10 VKDIM063E 109,14 VKDIM063F 138,01 1 4 03

VKDIM/SHXDUAL BLOCK® ball valve with handle block and stainless steel inserts for fixation, metric plain socket ends for socket welding



box type

16 10 10 VKDIMSHX016E 49,67 VKDIMSHX016F 57,39 1 22 03








32

VKD DN 10÷50PP-H

VKDDMDUAL BLOCK® ball valve with metric plain spigot ends for socket welding



box type

20 15 10 VKDDM020E 37,44 VKDDM020F 45,15 1 22 03

25 20 10 VKDDM025E 44,19 VKDDM025F 52,35 1 10 03

32 25 10 VKDDM032E 54,57 VKDDM032F 66,75 1 6 03

40 32 10 VKDDM040E 67,62 VKDDM040F 81,24 1 8 03

50 40 10 VKDDM050E 87,53 VKDDM050F 103,25 1 6 03

63 50 10 VKDDM063E 109,14 VKDDM063F 138,01 - 1 05

VKDFMDUAL BLOCK® ball valve with BS parallel socket threaded ends

R DN PN EPDM code € FPM


box type

1/2” 15 10 VKDFM012E 44,19 VKDFM012F 52,35 1 22 03

3/4” 20 10 VKDFM034E 49,61 VKDFM034F 58,22 1 10 03

1” 25 10 VKDFM100E 70,38 VKDFM100F 79,37 1 10 03

1” 1/4 32 10 VKDFM114E 74,83 VKDFM114F 90,19 1 8 03

1” 1/2 40 10 VKDFM112E 96,51 VKDFM112F 112,77 1 8 03

2” 50 10 VKDFM200E 123,60 VKDFM200F 153,38 1 4 03


33

VKD DN 10÷50PP-H

E5.

15

VKDOMDUAL BLOCK® 2-way ball valve with fixed flanges, drilled EN/ISO/DIN PN 10/16. Face to face according to EN 558-1



box type

20 15 10 VKDOM020E 75,47 VKDOM020F 87,18 1 12 03

25 20 10 VKDOM025E 88,67 VKDOM025F 100,42 1 8 03

32 25 10 VKDOM032E 110,89 VKDOM032F 128,27 1 8 03

40 32 10 VKDOM040E 144,71 VKDOM040F 163,34 1 4 03

50 40 10 VKDOM050E 171,64 VKDOM050F 185,16 - 1 05

63 50 10 VKDOM063E 211,66 VKDOM063F 245,43 - 1 05

VKDOAMDUAL BLOCK ® ball valve with ANSI B16.5 cl.150#FF fixed flanges



box type

1/2” 15 10 VKDOAM012E 75,47 VKDOAM012F 87,18 1 8 03

3/4” 20 10 VKDOAM034E 88,67 VKDOAM034F 100,42 1 8 03

1” 25 10 VKDOAM100E 110,89 VKDOAM100F 128,27 1 4 03

1” 1/4 32 10 VKDOAM114E 144,71 VKDOAM114F 163,34 1 4 03

1” 1/2 40 10 VKDOAM112E 171,64 VKDOAM112F 185,16 - 1 05

2” 50 10 VKDOAM200E 211,66 VKDOAM200F 245,43 - 1 05

VKDBMDUAL BLOCK® ball valve with PP-H SDR11 metric long spigot ends (CVDM) for butt welding



box type

20 15 10 VKDBM020E 41,49 VKDBM020F 49,61 1 22 03

25 20 10 VKDBM025E 48,71 VKDBM025F 58,23 1 12 03

32 25 10 VKDBM032E 59,10 VKDBM032F 73,02 1 8 03

40 32 10 VKDBM040E 73,94 VKDBM040F 90,19 1 8 03

50 40 10 VKDBM050E 95,63 VKDBM050F 113,66 1 8 03

63 50 10 VKDBM063E 119,08 VKDBM063F 152,41 1 1 05

Note: The valve might be supplied in VKDIM version with 2 CVDM end connectors for butt welding included


34

VKD DN 10÷50PP-H

VKDBEMDUAL BLOCK® ball valve with PE100 SDR11 metric long spigot ends (CVDE) for butt welding or electrofusion



box type

20 15 10 VKDBEM020E 41,49 VKDBEM020F 49,61 1 22 03

25 20 10 VKDBEM025E 48,71 VKDBEM025F 58,22 1 12 03

32 25 10 VKDBEM032E 59,10 VKDBEM032F 73,02 1 8 03

40 32 10 VKDBEM040E 73,94 VKDBEM040F 90,19 1 8 03

50 40 10 VKDBEM050E 95,63 VKDBEM050F 113,66 1 8 03

63 50 10 VKDBEM063E 119,08 VKDBEM063F 152,41 - 1 05

Note: The valve might be supplied in VKDIM version with 2 CVDE end connectors for butt welding included


35

E5.

15

FIP has developed aVKD DUAL BLOCK®ball valve to introduce a high reference standard in thermosplastic valve design. VKD is a True Union ball valve that meets the most stringent needs required by industrial applications.This valve is alsoequipped with acustomisableLabelling System.


union nutsSize range DN 65 ÷ 100Nominal pressure PN 10 with water at 20° CTemperature range 0 °C ÷ 100 °CCoupling standards Welding: EN ISO 15494.



Valve material PP-HSeal material EPDM, FPM;

PTFE (ball seats)


VKD


• Connection system for weld, threaded and flanged joints• Patented SEAT STOP® ball seat carrier system that lets you micro-adjust




sition• Full bore ball with high surface finish• Integrated bracket for valve anchoring• Possibility of installing a gear box or pneumatic and/or electric actuators by

applying an ISO standard bore PP-GR flange• STAINLESS steel co-moulded stem, with square section as per ISO 5211

DN 65÷100

36

1 HIPVC ergonomic multifunctional handle for quick operation, lock and graduated adjustment in 10 positions. Possibility of inhibiting rotation with a lock

2 Customisable Labelling System: built-in LCE module made of a transparent protection plug and customisable tag holder using the LSE set (available as an accessory). The customisation lets you identify the valve on the system according to specific needs


4 Double stem with double O-Rings for ball centring and operating torque reduction

1

2

3

4

4

37

VKD DN 65÷100PP-H

E5.

15

VKDIMDUAL BLOCK® ball valve with metric plain socket ends for socket welding



box type

75 65 10 VKDIM075E 308,08 VKDIM075F 388,45 - 1 04

90 80 10 VKDIM090E 387,25 VKDIM090F 488,30 - 1 03

110 100 10 VKDIM110E 468,83 VKDIM110F 569,84 1 1 03

VKDDMDUAL BLOCK® ball valve with metric plain spigot ends for socket welding



box type

75 65 10 VKDDM075E 308,08 VKDDM075F 388,45 - 1 04

90 80 10 VKDDM090E 387,25 VKDDM090F 488,30 - 1 03

110 100 10 VKDDM110E 468,83 VKDDM110F 569,84 1 1 03

VKDOMDUAL BLOCK® ball valve with EN/ISO/DIN PN 10/16 fixed flanges*, face to face according to EN558-1



box type

75 65 10 VKDOM075E 415,92 VKDOM075F 496,31 - 1 04

90 80 10 VKDOM090E 522,78 VKDOM090F 623,81 - 1 03

110 100 10 VKDOM110E 632,95 VKDOM110F 733,95 1 1 03

* Flanges with oval holes matching both DIN and ANSI standards


38

VKD DN 65÷100PP-H

VKDOAMDUAL BLOCK® ball valve with ANSI B16.5 cl.150#FF fixed flanges *



box type

2"1/2 65 10 VKDOM075E 415,92 VKDOM075F 496,31 - 1 04

3" 80 10 VKDOM090E 522,78 VKDOM090F 623,81 - 1 03

4" 100 10 VKDOM110E 632,95 VKDOM110F 733,95 1 1 03

* Flanges with oval holes matching both DIN and ANSI standards

VKDBMDUAL BLOCK® ball valve with PP-H SDR11 metric long spigot ends (CVDM) for butt welding



box type

75 65 10 VKDBM075E 338,56 VKDBM075F 418,94 - 1 04

90 80 10 VKDBM090E 426,21 VKDBM090F 527,23 1 1 03

110 100 10 VKDBM110E 515,04 VKDBM110F 616,05 1 1 03

VKDBEMDUAL BLOCK® 2-way ball valve with PE100 SDR 11 male end connectors for butt welding or electrofusion (CVDE)



box type

75 65 10 VKDBEM075E 338,56 VKDBEM075F 418,94 - 1 04

90 80 10 VKDBEM090E 426,21 VKDBEM090F 527,23 - 1 03

110 100 10 VKDBEM110E 515,04 VKDBEM110F 616,05 1 1 03


39

E5.

15

Technical specificationsConstruction 2-way True Union regulating ball valve with locked

carrier and lockable union nutsSize range DN 10 ÷ 50Nominal pressure PN 10 with water at 20° CTemperature range 0 °C ÷ 100 °CCoupling standards Welding: EN ISO 15494.




PTFE (ball seats)

Control options Manual control; electric actuator

VKR

The VKR DUALBLOCK® valve combines high reliability and safetyaspects typical ofVKD full bore ball valves with the new flow adjustment function with typical linear curve that meets the most stringent needs typical ofindustrial applications.

DUAL BLOCK® REGULATING BALL VALVE• Connection system for weld, threaded and flanged joints• Patented SEAT STOP® ball seat carrier system that lets you micro-adjust




sition• High surface finish stem with double O-Ring and double groove ball con-

nection • Integrated bracket for valve anchoring• Ball seat carrier can be adjusted using the Easytorque adjustment kit• Actuation option: version with electric modulating actuator with 4-20 mA /

0-10 V inlet and 4-20 mA / 0-10 V outlet to monitor the position• Valve suitable for carrying fluids that are clean and free of suspended par-

ticles

DN 10÷50

40

1

2

5

3

4

1 HIPVC ergonomic multifunctional handle with position indicator and removable key to adjust the ball seat carrier

2 Flow direction indication plate and opening angle with graduated scale with 5° detail for clear and accurate readings

3 90° operating angle that permits the use of standard quarter turn actuators

4 The patented ball design provides linear flow adjustment throughout its range of operation even when the valve is open just a few degrees and guarantees minimum pressure drops

5 Patented DUAL BLOCK® system: prevents union nuts from loosening even under extreme operating conditions: e.g. vibration or thermal expansion

41

VKR DN 10÷50PP-H

DUAL BLOCK® REGULATING BALL VALVE

E5.

15

VKRIM



box type

16 10 10 VKRIM016E 152,82 VKRIM016F 160,57 1 22 03

20 15 10 VKRIM020E 152,91 VKRIM020F 160,62 1 22 03

25 20 10 VKRIM025E 169,44 VKRIM025F 177,61 1 12 03

32 25 10 VKRIM032E 199,75 VKRIM032F 211,93 1 12 03

40 32 10 VKRIM040E 223,81 VKRIM040F 237,43 1 8 03

50 40 10 VKRIM050E 277,81 VKRIM050F 293,53 1 8 03

63 50 10 VKRIM063E 295,68 VKRIM063F 324,56 1 06 02

VKRDMDUAL BLOCK® regulating ball valve with metric plain spigot ends for socket welding



box type

20 15 10 VKRDM020E 152,91 VKRDM020F 160,62 1 22 03

25 20 10 VKRDM025E 169,44 VKRDM025F 177,61 1 10 03

32 25 10 VKRDM032E 199,75 VKRDM032F 211,93 1 6 03

40 32 10 VKRDM040E 223,81 VKRDM040F 237,43 1 8 03

50 40 10 VKRDM050E 277,81 VKRDM050F 293,53 1 6 03

63 50 10 VKRDM063E 295,68 VKRDM063F 324,56 - 1 05

42

VKR DN 10÷50PP-HDUAL BLOCK® REGULATING BALL VALVE

VKRFMDUAL BLOCK® regulating ball valve with BS parallel socket threaded ends



box type

3/8” 10 10 VKRFM038E 159,65 VKRFM038F 167,83 1 22 03

1/2” 15 10 VKRFM012E 159,65 VKRFM012F 167,83 1 22 03

3/4” 20 10 VKRFM034E 174,86 VKRFM034F 183,47 1 10 03

1” 25 10 VKRFM100E 215,56 VKRFM100F 224,54 1 10 03

1” 1/4 32 10 VKRFM114E 231,02 VKRFM114F 246,38 1 8 03

1” 1/2 40 10 VKRFM112E 286,77 VKRFM112F 303,03 1 8 03

2” 50 10 VKRFM200E 310,14 VKRFM200F 339,92 1 4 03

VKROMDUAL BLOCK® regulating ball valve with EN/ISO/DIN PN 10/16 fixed flanges, face to face according to EN 558-1



box type

20 15 10 VKROM020E 190,96 VKROM020F 202,66 1 - -

25 20 10 VKROM025E 213,92 VKROM025F 225,68 1 - -

32 25 10 VKROM032E 256,07 VKROM032F 273,45 1 - -

40 32 10 VKROM040E 300,91 VKROM040F 319,54 1 - -

50 40 10 VKROM050E 361,92 VKROM050F 375,43 - 1 05

63 50 10 VKROM063E 398,19 VKROM063F 431,98 - 1 05

43

VKR DN 10÷50PP-H

DUAL BLOCK® REGULATING BALL VALVE

E5.

15

VKROAMDUAL BLOCK® regulating ball valve with ANSI B16.5 cl.150#FF fixed flanges



box type

1/2” 15 10 VKROAM012E 190,96 VKROAM012F 202,66 1 - -

3/4” 20 10 VKROAM034E 213,92 VKROAM034F 225,68 1 - -

1” 25 10 VKROAM100E 256,07 VKROAM100F 273,45 1 - -

1” 1/4 32 10 VKROAM114E 300,91 VKROAM114F 319,54 1 - -

1” 1/2 40 10 VKROAM112E 361,92 VKROAM112F 375,43 - 1 05

2” 50 10 VKROAM200E 398,19 VKROAM200F 431,98 - 1 05

VKRBMDUAL BLOCK® regulating ball valve with PP-H SDR11 metric long spigot ends (CVDM) for butt welding



box type

20 15 10 VKRBM020E 156,98 VKRBM020F 165,09 1 22 03

25 20 10 VKRBM025E 173,97 VKRBM025F 183,48 1 12 03

32 25 10 VKRBM032E 204,28 VKRBM032F 218,21 1 8 03

40 32 10 VKRBM040E 230,14 VKRBM040F 246,38 1 8 03

50 40 10 VKRBM050E 285,89 VKRBM050F 303,92 1 8 03

63 50 10 VKRBM063E 305,62 VKRBM063F 338,97 - 1 05

Note: The valve might be supplied in VKRIM version with 2 CVDM end connectors for butt welding included

44

VKR DN 10÷50PP-HDUAL BLOCK® REGULATING BALL VALVE

VKRBEMDUAL BLOCK® regulating ball valve with PE100 SDR11 metric series long spigot ends (CVDE) for butt welding or electrofusion



box type

20 15 10 VKRBEM020E 156,98 VKRBEM020F 165,09 1 22 03

25 20 10 VKRBEM025E 173,97 VKRBEM025F 183,47 1 12 03

32 25 10 VKRBEM032E 204,28 VKRBEM032F 218,21 1 8 03

40 32 10 VKRBEM040E 230,14 VKRBEM040F 246,38 1 8 03

50 40 10 VKRBEM050E 285,89 VKRBEM050F 303,92 1 8 03

63 50 10 VKRBEM063E 305,62 VKRBEM063F 338,97 - 1 05

Note: The valve might be supplied in VRDIM version with 2 CVDE end connectors for butt welding included

45

E5.

15


lockable union nutsSize range DN 15 ÷ 50Nominal pressure PN 10 with water at 20° CTemperature range 0 °C ÷ 100 °CCoupling standards Welding: EN ISO 15494.




PTFE (ball seats)


TKD

FIP has developed aVKD DUAL BLOCK®ball valve to introduce a high reference standard in thermosplastic valve design. TKD is a True Union diverting and mixing ball valve that meets the most stringent needs required in industrial applications.


• Connection system for weld and threaded joints• Patented SEAT STOP® ball seat carrier system that lets you micro-adjust



with built-in bores for actuation. ISO 9393 compliant test requisites• Option of disassembling downstream pipes with the valve in the closed

position• High surface finish stem with double O-Ring and double groove ball

connection, equipped with optical position indicator for correct handle installation

• Integrated bracket for valve anchoring• Possibility of installing pneumatic and/or electric actuators thanks to the

robust integrated bracket for valve anchoring for easy and quick automa-tion using the Power Quick module (optional)

DN 15÷50

46

1

4

2

3

5

1 Ergonomic HIPVC handle equipped with removable key to adjust the carrier of the ball seats. Possibility of installing the LTKD stroke limiter (available as an accessory) that permits ball and handle rotation only for set opening and closing angles at 90° or 180°

2 Handle lock 0°- 90° SHKD (available as an accessory) ergonomically operable during service and lockable


4 Ball shutter high surface finish with floating type full passage with T or L port

5 4 PTFE ball seat system that compensates axial force guaranteeing optimal manageability and long working life

47

TKD DN 10÷50PP-H

E5.

15

TKDIM - LKDIMDUAL BLOCK® 3-way ball valve with metric plain socket ends for socket welding. TKDIM - T bore / LKDIM - L bore

d DN PNTKDIM EPDM code

€TKDIM

FPM code

€LKDIM EPDM code

€LKDIM

FPM code

€ pack n./box

box type

20 15 10 TKDIM020E 82,81 TKDIM020F 93,58 LKDIM020E 96,85 LKDIM020F 107,62 1 6 04




50 40 10 TKDIM050E 161,20 TKDIM050F 201,49 LKDIM050E 191,40 LKDIM050F 231,71 - 1 05

63 50 10 TKDIM063E 203,83 TKDIM063F 254,82 LKDIM063E 242,05 LKDIM063F 293,05 - 1 05

Note: The valve might be supplied in TKDIM version with 3 threaded end connectors included

TKDFM - LKDFMDUAL BLOCK® 3-way ball valve with BS parallel socket threaded ends. TKDFM - T bore / LKDFM - L bore

R DN PNTKDFM

EPDM code

€TKDFM

FPM code

€LKDFM

EPDM code

€LKDFM

FPM code

€ pack n./box

box type

1/2” 15 10 TKDFM012E 92,16 TKDFM012F 102,94 LKDFM012E 106,20 LKDFM012F 116,97 1 6 04

3/4” 20 10 TKDFM034E 103,78 TKDFM034F 117,71 LKDFM034E 119,84 LKDFM034F 133,77 1 4 04

1” 25 10 TKDFM100E 133,15 TKDFM100F 151,06 LKDFM100E 153,73 LKDFM100F 171,64 1 4 04

1” 1/4 32 10 TKDFM114E 152,28 TKDFM114F 176,79 LKDFM114E 176,39 LKDFM114F 200,93 1 2 04

1” 1/2 40 10 TKDFM112E 181,35 TKDFM112F 221,63 LKDFM112E 211,58 LKDFM112F 251,84 - 1 05

2” 50 10 TKDFM200E 229,34 TKDFM200F 280,31 LKDFM200E 267,54 LKDFM200F 318,51 - 1 05

Note: The valve might be supplied in TKDIM version with 3 threaded end connectors included


48

Technical specificationsConstruction Ball check valveSize range DN 15÷50Nominal pressure PN 10 with water at 20° CTemperature range 0 °C ÷ 100 °CCoupling standards Welding: EN ISO 15494.


Reference standards Construction criteria: EN ISO 16137, EN ISO 15494Test methods and requirements: ISO 9393


Valve material Body: PP-HBall: PP

Seal material FPM (spare set in EPDM available on request)

SR

The SR check valve allows the passage of fluid in a single direction.

BALL CHECK VALVE

• Connection system for weld joints• PN10 valve body made for PP-H injection moulding and European Di-

rective 97/23/EC compliant for PED pressurised equipment. ISO 9393 compliant test requirements

• The valve can only be used with fluids with specific weight under 1,20 g/cm3

• Sealing system with antiblow out design• Ball entirely in talc-filled PP• Can be maintained with the valve body installed• Can be installed in either a vertical (preferable) or horizontal position

DN 15÷50

49

SR DN 15÷50PP-H

BALL CHECK VALVE

E5.

15

SRIMBall check valve with plain socket/spigot ends for socket welding

d DN FPM Code € pack n./

boxbox

type20 15 SRIM020F 42,38 1 16 04

25 20 SRIM025F 46,93 1 20 04

32 25 SRIM032F 51,44 1 6 04

40 32 SRIM040F 63,19 1 3 04

50 40 SRIM050F 74,83 1 3 04

63 50 SRIM063F 112,32 1 3 04

Note: for EPDM version use the FPM version + spare set in EPDM SETSR…E, (see ER Price List)

50

Technical specificationsConstruction Bi-directional centric butterfly valveSize range DN 40÷400Nominal pressure Wafer version

DN 40÷250: PN 10 with water at 20° CDN 300: PN 8 with water at 20° CDN 350: PN 7 with water at 20° CDN 400: PN 6 with water at 20° CLug version DN 65÷200: PN 10 with water at 20° CDN 250÷300: PN 6 with water at 20° C

Temperature range 0 °C ÷ 100 °CCoupling standards Flanging system: EN ISO 15494, DIN 2501, ISO 7005-

1, EN 1092-1, ASTM B16.5 cl.150, JIS B 2220

Reference standards Construction criteria: EN ISO 16136, EN ISO 15494Test methods and requirements: ISO 9393Actuator couplings: ISO 5211

Valve material Body: PP-GRDisk: PP-HStem: AISI steel 316

Seal material Liner: EPDM, FPM. On request NBR

Control options Manual control (DN 40÷200); Gearbox, pneumatic actuator, electric actuator

FK

The FK is a butterfly valve for shutting off or regulating flow, with structural characteristics that make it ideal for industrial applications requiring high performance and long-term reliability. This valve is also equipped with the customisable Labelling System.

BUTTERFLY VALVE

• Interchangeable Disk in PP-H with through shaft, available in different ther-moplastic materials: PVC-U, PVC-C, ABS, PVDF

• Overall dimensions of the valve in accordance with standard ISO 5752 (DN 40÷200 Medium series 25, DN 250÷ 300 Long Series 16) and DIN

3202 K2 and ISO 5752 (DN DN 65÷200 K2, DN 250÷300 K3)• Can also be installed as an end line valve, bottom discharge valve or tank

dump valve• Special Lug version PN 10 fully drilled according to DIN 2501 or ANSI B16.5

cl.150 with molded-in AISI 316 stainless steel threaded inserts• Valve material compatibility (PP-H) with water conveyance, drinking water

and other food substances according to current regulations• Possibility of installing a manual reducer or pneumatic and/or electric ac-

tuators by applying an ISO standard drilling PP-GR flanges. DN 40 ÷ 200 valve equipped with plate with rack in PP-GR. For actuated versions with flange drilled according to ISO 5211 F05, F07, F10. DN 250÷300 valve, fitted with one-piece top flange in high mechanical strength PP-GR with mount-ing flange for internal components drilled according to standard ISO 5211 F10 (excluding DN 350÷400), F12, F14.

DN 40÷400

51

E5.

151 Ergonomic handle in HIPVC

equipped with locking and unlocking device, release, quick operation and graduated adjustment in 10 intermediate positions (DN 40÷200). The operating range, starting from the first few degrees of valve opening, also guarantees extremely low pressure drops.

2 Customisable Labelling System: integrated module in the handle, made of a transparent protection plug and a customisable tag holder using the LSE set (available as an accessory). The customisation lets you identify the valve on the system according to specific needs.

3 STAINLESS steel square section stem completely isolated from the fluid complying with standard

ISO 5211: DN 40÷65: 11 mm DN 80÷100: 14 mm DN 125÷150: 17 mm DN 200: 22 mm DN 250÷400: 27 mm

4 Body in polypropylene based compound reinforced with fibreglass (PP-GR) resistant to UV rays and characterised by high mechanical strength.

5 Drilling pattern using oval slots that allow coupling to flanges according to numerous international standards. The

special self-centring inserts in ABS supplied for DN 40÷200 guarantee the correct axial alignment of the valve during installation.

For DN 250÷400 valves, the drilling pattern for the self-centring system is of the traditional type according to DIN and ANSI standards.

6 Interchangeable liner with the dual function of forming a hydraulic seal and isolating the body from the fluid.

2

3

1

4 5

6

52

FK DN 40÷400PP-HBUTTERFLY VALVE

FKOM/LMHand operated Butterfly valve



box type

50 - 1"1/2 40 10 FKOMLM050E 195,62 FKOMLM050F 278,93 1 6 03

63 - 2" 50 10 FKOMLM063E 207,12 FKOMLM063F 295,31 1 6 03

75 - 2"1/2 65 10 FKOMLM075E 230,14 FKOMLM075F 328,12 1 6 02

90 - 3" 80 10 FKOMLM090E 242,00 FKOMLM090F 344,46 1 6 02

110 - 4" 100 10 FKOMLM110E 262,81 FKOMLM110F 368,22 1 5 02

140 - 5" 125 10 FKOMLM140E 348,91 FKOMLM140F 493,67 1 4 02

160 - 6" 150 10 FKOMLM160E 377,11 FKOMLM160F 513,73 1 4 02

200 - 8" 200 10 FKOMLM225E 488,46 FKOMLM225F 666,64 1 2 02

*225 - 8" 200 10 FKOMLM225E 488,46 FKOMLM225F 666,64 1 2 02

Note: for d75-d225 NBR primary liner available, see ER Price list*d 200: FK d 225 with chamfered end stub type QBM (QBM17FK200), see EB Price list

FKOM/LM LUG ISO-DINHand operated Butterfly valve, version Lug ISO-DIN



box type

75 65 10 FKOLMLM075E 322,19 FKOLMLM075F 420,18 1 6 02





*200 200 10 FKOLMLM225E 683,74 FKOLMLM225F 861,89 1 2 02



53

FK DN 40÷400PP-H

BUTTERFLY VALVE

E5.

15

FKOM/LM LUG ANSIHand operated Butterfly valve, version Lug ANSI



box type

2” 1/2 65 10 FKOALMLM212E 368,22 FKOALMLM212F 466,19 1 6 02

3” 80 10 FKOALMLM300E 410,51 FKOALMLM300F 512,99 1 6 02





Note: for d 2” 1/2 - d 8” NBR primary liner available, see ER Price list

54


FKOM/FMButterfly valve with bare shaft

d DN PN EPDM code € EPDM


box type

50 - 1"1/2 40 10 FKOMFM050E 166,59 FKOMFM050F 251,14 1 6 03

63 - 2" 50 10 FKOMFM063E 176,39 FKOMFM063F 265,93 1 6 03

75 - 2"1/2 65 10 FKOMFM075E 195,98 FKOMFM075F 295,45 1 6 02

90 - 3" 80 10 FKOMFM090E 213,06 FKOMFM090F 317,00 1 6 02

110 - 4" 100 10 FKOMFM110E 231,62 FKOMFM110F 339,25 1 5 02

140 - 5" 125 10 FKOMFM140E 307,34 FKOMFM140F 454,34 1 4 02

160 - 6" 150 10 FKOMFM160E 339,25 FKOMFM160F 487,74 1 4 02

200*/225 - 8" 200 10 FKOMFM225E 439,49 FKOMFM225F 633,25 1 2 02

250 **250 10 FKOMFM280E 1.400,31 FKOMFM280F 2.266,02 - 1 08

280 **250 10 FKOMFM280E 1.400,31 FKOMFM280F 2.266,02 - 1 08

315 **300 8 FKOMFM315E 1.527,28 FKOMFM315F 2.470,94 - 1 08

355 **350 7 FKOMFM355E 2.410,57 FKOMFM355F 4.383,50 - - 00

400 **400 6 FKOMFM400E 2.784,32 FKOMFM400F 5.632,00 - - 00

10" ***250 10 FKOAMFM810E 1.400,31 FKOAMFM810F 2.266,02 - 1 08

12" ***300 8 FKOAMFM812E 1.527,28 FKOAMFM812F 2.470,94 - 1 08

14" ***350 7 FKOAMFM814E 2.410,57 FKOAMFM814F 4.383,50 - - 00

16" ***400 6 FKOAMFM816E 2.784,32 FKOAMFM816F 5.632,00 - - 00

Note: for d75-d225 NBR primary liner available, see ER Price list*d 200: FK d 225 with chamfered end stub type QBM (QBM17FK200), see EB Price List

**ISO-DIN***ANSI B.16.5 cl.150

55

FK DN 40÷400PP-H

BUTTERFLY VALVE

E5.

15

FKOM/FM LUG ISO-DINButterfly valve with bare shaft, version Lug ISO-DIN



box type

75 65 10 FKOLMFM075E 288,02 FKOLMFM075F 387,53 1 6 02





*200 200 10 FKOLMFM225E 634,72 FKOLMFM225F 828,49 1 2 02



FKOM/FM LUG ANSIButterfly valve with bare shaft, version Lug ANSI

d (inch) DN PN EPDM code € FPM


box type

2” 1/2 65 10 FKOALMFM212E 334,06 FKOALMFM212F 433,55 1 6 02

3” 80 10 FKOALMFM300E 381,58 FKOALMFM300F 485,51 1 6 02





10” 250 6 FKOALMFM810E 2.336,27 FKOALMFM810F 3.201,99 - 1 08

12” 300 6 FKOALMFM812E 2.484,70 FKOALMFM812F 3.428,36 - 1 08

Note: for d 2” 1/2 - d 8” NBR primary liner available, see ER Price List

56


FKOM/RMGearbox operated Butterfly valve



box type

75 - 2"1/2 65 10 FKOMRM075E 528,58 FKOMRM075F 625,81 - 1 04

90 - 3" 80 10 FKOMRM090E 540,44 FKOMRM090F 642,15 - 1 04

110 - 4" 100 10 FKOMRM110E 561,21 FKOMRM110F 666,64 - 1 04

140 - 5" 125 10 FKOMRM140E 647,36 FKOMRM140F 792,12 - 1 02

160 - 6" 150 10 FKOMRM160E 675,57 FKOMRM160F 812,16 - 1 02

200 - 8" 200 10 FKOMRM225E 854,47 FKOMRM225F 1.032,65 - 1 02

225 - 8" 200 10 FKOMRM225E 854,47 FKOMRM225F 1.032,65 - 1 02

250 **250 10 FKOMRM280E 1.612,65 FKOMRM280F 2.478,38 - 1 08

280 **250 10 FKOMRM280E 1.612,65 FKOMRM280F 2.478,38 - 1 08

315 **300 8 FKOMRM315E 1.739,62 FKOMRM315F 2.683,29 - 1 08

355 **350 7 FKOMRM355E 2.960,56 FKOMRM355F 4.933,50 - - 00

400 **400 6 FKOMRM400E 3.334,32 FKOMRM400F 6.182,00 - - 00

10" ***250 10 FKOAMRM810E 1.612,65 FKOAMRM810F 2.478,38 - 1 08

12" ***300 8 FKOAMRM812E 1.739,62 FKOAMRM812F 2.683,29 - 1 08

14" ***350 7 FKOAMRM814E 2.960,56 FKOAMRM814F 4.933,50 - - 00

16" ***400 6 FKOAMRM816E 3.334,32 FKOAMRM816F 6.182,00 - - 00


**ISO-DIN***ANSI B.16.5 150#

57

FK DN 40÷400PP-H

BUTTERFLY VALVE

E5.

15

FKOM/RM LUG ISO-DINGearbox operated Butterfly valve, version Lug ISO-DIN



box type

75 65 10 FKOLMRM075E 620,62 FKOLMRM075F 717,87 - 1 04




160 150 10 FKOLMRM160E 864,14 FKOLMRM160F 1.000,71 - 1 02

*200 200 10 FKOLMRM225E 1.049,70 FKOLMRM225F 1.227,87 - 1 02

225 200 10 FKOLMRM225E 1.049,70 FKOLMRM225F 1.227,87 - 1 02


FKOM/RM LUG ANSIGearbox operated Butterfly valve, version Lug ANSI



box type

2” 1/2 65 10 FKOALMRM212E 666,64 FKOALMRM212F 763,89 1 1 02

3” 80 10 FKOALMRM300E 708,95 FKOALMRM300F 810,67 - 1 04

4” 100 10 FKOALMRM400E 744,59 FKOALMRM400F 850,02 - 1 04

5” 125 10 FKOALMRM500E 891,58 FKOALMRM500F 1.036,34 1 1 02

6” 150 10 FKOALMRM600E 939,85 FKOALMRM600F 1.076,43 1 1 02

8” 200 10 FKOALMRM800E 1.146,93 FKOALMRM800F 1.325,10 - 1 02



Note: for d 2” 1/2 - d 8” NBR primary liner available, see ER Price list

58

Technical specificationsConstruction Diaphragm valve with maximized flow rate and

DIALOCK® lockable handwheelSize range DN 15 ÷ 65Nominal pressure PN 10 with water at 20° CTemperature range 0 °C ÷ 100 °CCoupling standards Welding: EN ISO 15494.


Flanging system: ISO 7005-1, EN 1092-1, EN ISO 15494, EN 558-1, DIN 2501, ANSI B16.5 cl.150

Reference standards Construction criteria: EN ISO 16138, EN ISO 15494Test methods and requirements: ISO 9393Installation criteria: DVS 2202-1, DVS 2207-11,DVS 2208-1, UNI 11318

Valve material Body: PP-HBonnet and handwheel: PP-GRPosition indicator cap: PVC

Diaphragm material EPDM, FPM, PTFE (on request NBR)Control options Manual control; pneumatic actuator

DK

The DK DIALOCK® diaphragm valve is particularly suitable for shutting off and regulating abrasive or dirty fluids. The new internal geometry of the body optimises fluid dynamic efficiency by increasing the flow rate and ensuring an optimum linearity of the flow adjustment curve. The DK is extremely compact and very light. The innovative handwheel is equipped with a patented immediate and ergonomic operating locking device that allows it to be adjusted and locked in any position.

DIALOCK® 2-WAY DIAPHRAGM VALVE

• Connection system for solvent weld, threaded and flanged joints • Optimised fluid dynamic design: maximum output flow rate thanks to the

optimised efficiency of the fluid dynamics that characterise the new internal geometry of the body

• Internal components in metal, totally isolated from the fluid and external environment

• Modularity of the range: only 2 handwheel and 4 diaphragm and bonnet sizes for 7 different valve sizes

• Non-rising handwheel that stays at the same height during rotation, equipped with a graduated optical indicator protected by a transparent PVC cap with seal O-Ring

• Bonnet fastening screws in stainless steel protected against the external environment by PE plugs. Absence of metal parts exposed to the external environment to prevent any risk of corrosion

• CDSA (Circular Diaphragm Sealing Angle) system that, thanks to the uni-form distribution of shutter pressure on the diaphragm seal, offers the fol-lowing advantages:- reduction in the tightening torque of the screws fixing the actuator to the

valve body- reduced mechanical stress on all valve components (actuator, body and

diaphragm)- easy to clean valve interior- low risk of the accumulation of deposits, contamination or damage to the

diaphragm due to crystallisation- operating torque reduction

DN 15÷65

59

E5.

151 High visibility graduated

optical position indicator protected by a transparent cap with seal O-Ring

2 Customisation plate: the customisation lets you identify the valve on the system according to specific needs

3 DIALOCK® SYSTEM: innovative handwheel with a patented immediate and ergonomic operating locking device that allows it to be adjusted and locked in over 300 positions

4 Handwheel and bonnet in high mechanical strength and chemically resistant PP-GR, providing full protection by isolating all internal metal parts from contact with external agents

5 Floating pin connection between the control screw and diaphragm to prevent concentrated loads, improve the seal and extend its lifetime

6 New design of valve body interior: substantially increased flow coefficient and reduced pressure drop. The degree of efficiency reached has also enabled the size and weight of the valve to be reduced

7 Adjustment linearity: the internal profiles of the valve also greatly improve its characteristic curve, resulting in extremely sensitive and precise adjustment along the entire stroke of the shutter

8 Valve anchoring bracket integrated in the body, with threaded metal inserts allowing simple panel or wall mounting using the PMDK mounting plate (supplied as an accessory)

3

4

7

12

6

8

5

60

DK DN 15÷65PP-HDIALOCK® 2-WAY DIAPHRAGM VALVE

DKDMDIALOCK® diaphragm valve with male ends for socket welding, metric series


code € PTFE code € pack n./

boxbox

type20 15 10 DKDM020E 65,85 DKDM020F 101,93 DKDM020P 117,31 1 8 03

25 20 10 DKDM025E 71,27 DKDM025F 109,15 DKDM025P 123,63 1 8 03






DKLDMDIALOCK® diaphragm valve with stroke limiter and male ends for socket welding, metric series



boxbox

type20 15 10 DKLDM020E 137,95 DKLDM020F 174,03 DKLDM020P 189,41 1 8 03

25 20 10 DKLDM025E 143,37 DKLDM025F 181,25 DKLDM025P 195,73 1 8 03






61

DK DN 15÷65PP-H

DIALOCK® 2-WAY DIAPHRAGM VALVE

E5.

15

DKUIMDIALOCK® diaphragm valve with female union ends for socket welding, metric series



boxbox

type20 15 10 DKUIM020E 76,69 DKUIM020F 112,77 DKUIM020P 128,05 1 8 03

25 20 10 DKUIM025E 82,10 DKUIM025F 119,97 DKUIM025P 134,38 1 8 03





DKLUIMDIALOCK® diaphragm valve with stroke limiter and female union ends for socket welding, metric series



boxbox

type20 15 10 DKLUIM020E 148,79 DKLUIM020F 184,87 DKLUIM020P 200,15 1 8 03

25 20 10 DKLUIM025E 154,20 DKLUIM025F 192,07 DKLUIM025P 206,48 1 8 03





62

DK DN 15÷65PP-HDIALOCK® 2-WAY DIAPHRAGM VALVE

DKOMDIALOCK® diaphragm valve with fixed flanges, drilled PN10/16. Face to face according to EN 558-1



boxbox

type20 15 10 DKOM020E 99,71 DKOM020F 135,79 DKOM020P 151,15 1 4 03

25 20 10 DKOM025E 107,12 DKOM025F 145,01 DKOM025P 159,48 1 4 03



50 40 10 DKOM050E 179,18 DKOM050F 240,53 DKOM050P 257,64 - 1 04



DKLOM version available on request

DKOAMDIALOCK® diaphragm valve with fixed flanges, drilled ANSI B16.5 cl. 150 #FF



boxbox

type1/2" 15 10 DKOAM012E 99,71 DKOAM012F 135,79 DKOAM012P 151,15 1 4 03

3/4" 20 10 DKOAM034E 107,12 DKOAM034F 145,01 DKOAM034P 159,48 1 4 03

1" 25 10 DKOAM100E 120,98 DKOAM100F 157,96 DKOAM100P 172,43 1 2 04

1" 1/4 32 10 DKOAM114E 147,18 DKOAM114F 208,57 DKOAM114P 225,64 1 2 04

1" 1/2 40 10 DKOAM112E 179,18 DKOAM112F 240,53 DKOAM112P 257,64 - 1 04

2" 50 10 DKOAM200E 226,11 DKOAM200F 329,81 DKOAM200P 328,03 - 1 04

2" 1/2 *65 10 DKOM075E 293,94 DKOM075F 428,75 DKOM075P 426,43 - 1 03

DKLOAM version available on request*Flanges with oval holes matching both DIN and ANSI standards

63

Technical specificationsConstruction Single wear diaphragm valveSize range DN 80 ÷ 100

Nominal pressure PN 10 with water at 20° CPN 6 with water at 20° C (PTFE version)

Temperature range 0 °C ÷ 100 °CCoupling standards Welding: EN ISO 15494.


Flanging system: ISO 7005-1, EN 1092-1, EN ISO 15494, EN 558-1, DIN 2501, ANSI B16.5 cl.150

Reference standards Construction criteria: EN ISO 16138, EN ISO 15494Test methods and requirements: ISO 9393Installation criteria: DVS 2202-1, DVS 2207-11, DVS 2208-1, UNI 11318

Valve material Body: PP-HBonnet: PP-GRHandwheel: PA-GR

Diaphragm material EPDM, FPM, PTFE (on request NBR)Control options Manual control; pneumatic actuator

VM

The VM is particularly suitable for shutting off and regulating abrasive or dirty fluids. The handwheel control and diaphragm seal provide precise and effective control, while reducing the risk of water hammer to a minimum.

DIAPHRAGM VALVE

• Connection system for weld, threaded and flanged joints • Compact and lightweight construction• High flow coefficient and minimum pressure drop• Internal components in metal totally isolated from the conveyed fluid,

with anti-friction disk to reduce friction to a minimum• Handwheel that stays at the same height during rotation

DN 80÷100

64

1 Handwheel in (PA-GR) with high mechanical strength and ergonomic grip for optimum manageability

2 Metal optical position indicator supplied as standard

3 Full protection bonnet in PP-GR. Internal circular and symmetrical

diaphragm sealing area

4 Diaphragm available in EPDM, FPM, PTFE (NBR on request) and easy to replace

5 Threaded metal inserts for anchoring the valve

1

3

5

2

4

65

VM DN 80÷100PP-H

DIAPHRAGM VALVE

E5.

15

VMDMDiaphragm valve with metric plain spigot ends for socket welding



boxbox

type90 80 *10 VMDM090E 426,45 VMDM090F 731,18 VMDM090P 568,59 - 1 03

110 100 *10 VMDM110E 566,75 VMDM110F 1.072,11 VMDM110P 742,32 - 1 02

* PTFE: PN6Note: male end connectors in PP-H and PE100 for socket welding available on request

VMOMDiaphragm valve with PN 10/16 fixed flanges. Face to face according to EN 558-1



boxbox

type90 80 *10 VMOM090E 569,93 VMOM090F 874,65 VMOM090P 712,07 - 1 02

110 100 *10 VMOM110E 729,86 VMOM110F 1.235,21 VMOM110P 905,42 - 1 02

*PTFE PN6

VMOAMDiaphragm valve with ANSI B16.5 cl. 150 #FF fixed flanges*

d PN EPDM code € FPM


boxbox

type3" *10 VMOAM300E 569,93 VMOAM300F 874,65 VMOAM300P 712,07 - 1 02

4" *10 VMOM110E 729,86 VMOM110F 1.235,21 VMOM110P 905,42 - 1 02

*PTFE PN6* with flanges drilled DIN-ANSI

66

Technical specificationsConstruction Compact single wear diaphragm valveSize range DN 12÷15Nominal pressure PN 6 with water at 20° CTemperature range 0 °C ÷ 100 °CCoupling standards Welding: EN ISO 15494.


Reference standards Construction criteria: EN ISO 16138, EN ISO 15494Test methods and requirements: ISO 9393Installation criteria: DVS 2202-1, DVS 2207-11, DVS 2208-1, UNI 11318

Valve material Body: PP-HBonnet and handwheel: PA-GR

Diaphragm material EPDM, FPM, PTFEControl options Manual control; pneumatic actuator

CM

The CM is a manually operated diaphragm valve of reduced dimensions and particularly compact structure, ideal for use in confined spaces.

COMPACT DIAPHRAGM VALVE

• Connection system for weld and threaded joints• Extremely compact construction• Internal operating components in metal totally isolated from the

conveyed fluid• Valve stem in STAINLESS steel• Compressor with floating diaphragm support• Easy to replace diaphragm seal• Corrosion-proof internal components• Innovative CDSA (Circular Diaphragm Sealing Angle) system offering the

following advantages:- uniform distribution of shutter pressure on the diaphragm seal- reduction in the tightening torque of the screws fixing the actuator to the

valve body- reduced mechanical stress on all valve components (actuator, body and

diaphragm)- easy to clean valve interior- low risk of the accumulation of deposits, contamination or damage to the

diaphragm due to crystallisation- operating torque reduction

DN 12÷15

67

E5.

15

1 Handwheel in PA-GR, completely sealed, high mechanical strength with ergonomic grip for optimum manageability

2 Integrated adjustable torque limiter designed to prevent excessive compression of the diaphragm and always guarantee a minimum fluid flow

3 Optical position indicator supplied as standard

4 Bonnet in PA-GR with STAINLESS steel nuts fully protected by plastic plugs to eliminate zones where impurities may accumulate. Internal circular and symmetrical diaphragm sealing area

5 STAINLESS steel bolts, can also be inserted from above

6 Threaded metal inserts for anchoring the valve

1

2

3

6

5

4

68

CM DN 12÷15PP-HCOMPACT DIAPHRAGM VALVE

CMDMDiaphragm valve with metric spigot ends for socket welding



boxbox

type20 15 6 CMDM020E 78,08 CMDM020F 82,67 CMDM020P 89,23 1 8 04

CMIMDiaphragm valve with metric socket ends for socket welding



boxbox

type16 12 6 CMIM016E 43,66 CMIM016F 59,49 CMIM016P 66,92 1 8 04

20 15 6 CMIM020E 43,66 CMIM020F 59,49 CMIM020P 66,92 1 8 04

CMFMDiaphragm valve with BS parallel threaded socket ends



boxbox

type3/8” 12 6 CMFM038E 43,66 CMFM038F 59,49 CMFM038P 66,92 1 8 04

1/2” 15 6 CMFM012E 43,66 CMFM012F 59,49 CMFM012P 66,92 1 8 04

69

CM DN 12÷15PP-H

COMPACT DIAPHRAGM VALVE

E5.

15

CMUIMDiaphragm valve with unionised metric socket ends for socket welding


code € *PTFE code € pack n./

boxbox

type20 15 6 CMUIM020E 69,65 CMUIM020F 84,56 CMUIM020P 92,90 1 8 04

* Union O-rings in FPMNote 1: On request threaded ends 1/2” BSP available (CMUFM)

Note 2: PP-H and PE100 end connectors long spigot for butt welding available on request

70

Technical specificationsConstruction Sediment strainerSize range DN 15÷100Nominal pressure DN 15÷50: PN 10 with water at 20° C

DN 65: PN 6 with water at 20° CDN 80÷100: PN 4 with water at 20° C



Reference standards Construction criteria: EN ISO 15494Test methods and requirements: ISO 9393


Valve material Body: PP-HStrainer: PP

Seal material EPDM or FPM

RV

The RV Sediment strainer limits the passage of any solid particles present in the fluid by means of a strainer.

SEDIMENT STRAINER

• Connection system for weld, threaded and flanged joints• Strainer assembled on an easily removed support that facilitates cleaning

or replacement• Valve material compatibility (PP-H) with water conveyance, drinking wa-

ter and other food substances according to current regulations• Can be maintained with the valve body installed

DN 15÷100

71

RV DN 10÷100PP-H

SEDIMENT STRAINER

E5.

15

RVUIMSediment strainer with unionised metric socket ends for socket welding



box type

20 15 10 RVUIM020E 47,85 RVUIM020F 51,97 2 20 04

25 20 10 RVUIM025E 59,82 RVUIM025F 64,80 2 20 04

32 25 10 RVUIM032E 72,41 RVUIM032F 75,80 2 10 04

40 32 10 RVUIM040E 79,30 RVUIM040F 88,20 2 6 04

50 40 10 RVUIM050E 86,43 RVUIM050F 101,71 2 6 03

63 50 10 RVUIM063E 119,40 RVUIM063F 140,01 2 4 03

Note: Standard filter screen is in PP-H, pitch 1,5 mm

RVIMSediment strainer with metric socket ends for socket welding



box type

75 65 6 RVIM075E 152,88 RVIM075F 156,05 - 2 04

90 80 4 RVIM090E 189,16 RVIM090F 200,26 - 1 04

110 100 4 RVIM110E 346,27 RVIM110F 394,27 - 1 04

Note: Standard filter screen is in PP-H, pitch 1,5 mm

RVUFMSediment strainer with unionised BS parallel threaded socket ends

R DN PN FPM code € pack n./

boxbox

type1/2” 15 10 RVUFM012F 55,07 2 20 04

3/4” 20 10 RVUFM034F 68,71 2 20 04

1” 25 10 RVUFM100F 81,87 2 10 04

1” 1/4 32 10 RVUFM114F 93,49 2 6 04

1” 1/2 40 10 RVUFM112F 107,80 2 6 03

2” 50 10 RVUFM200F 147,00 2 4 03

Note 1: The sediment strainer RVUFM/FPM might be supplied in RVUIM/FPM version with 2 threaded sockets includedNote 2: Standard filter screen is in PP-H, pitch 1,5 mm

72

Technical specificationsConstruction Angle seat check valveSize range DN 15 ÷ 80Nominal pressure DN 15÷50: PN 10 with water at 20° C

DN 65: PN 6 with water at 20° CDN 80: PN 4 with water at 20° C



Reference standards Construction criteria: EN ISO 16137, EN ISO 15494Test methods and requirements: ISO 9393

Installation criteria: DVS 2202-1, DVS 2207-11,DVS 2208-1, UNI 11318

Valve material PP-HSeal material EPDM or FPM

VR

The VR is an angle seat check valve with weighted PP-H piston that allows the passage of fluid in one direction only.

CHECK VALVE

• Connection system for weld, threaded and flanged joints• No metal parts in contact with the fluid• Piston with counterweight able to work with high intensity fluid• Limited pressure drop. Only minimum back pressure is required for the

hermetic seal• Valve material compatibility (PP-H) with water conveyance, drinking wa-

ter and other food substances according to current regulations • Can be maintained with the valve body installed

DN 15÷80

73

VR DN 15÷80PP-H

CHECK VALVE

E5.

15

VRUIMAngle seat check valve with unionised metric plain socket ends for socket welding



box type

20 15 10 VRUIM020E 40,97 VRUIM020F 44,32 2 20 04

25 20 10 VRUIM025E 46,34 VRUIM025F 50,79 2 10 04

32 25 10 VRUIM032E 48,12 VRUIM032F 55,08 2 10 04

40 32 10 VRUIM040E 58,48 VRUIM040F 66,98 2 6 04

50 40 10 VRUIM050E 66,17 VRUIM050F 80,99 2 6 03

63 50 10 VRUIM063E 101,11 VRUIM063F 123,10 2 6 02

VRIMAngle seat check valve with metric plain socket ends for socket welding



box type

75 65 6 VRIM075E 226,93 VRIM075F 247,18 - 2 04

90 80 4 VRIM090E 370,66 VRIM090F 406,89 - 1 04

VRUFMAngle seat check valve with unionised BS parallel threaded socket ends

R DN PN FPM code € pack n./

boxbox

type1/2” 15 10 VRUFM012F 46,97 2 20 04

3/4” 20 10 VRUFM034F 53,82 2 10 04

1” 25 10 VRUFM100F 59,49 2 10 04

1” 1/4 32 10 VRUFM114F 70,98 2 6 04

1” 1/2 40 10 VRUFM112F 85,88 2 6 03

2” 50 10 VRUFM200F 129,24 2 6 02

Note: The Angle Seat Check Valve VRUFM/FPM might be supplied in VRUIM/FPM version with 2 threaded sockets included

74

CONNECTIONSPP-HCONNECTIONS FOR BALL AND ANGLE SEAT VALVES

CVDMEnd Connector SDR11 in PP-H SDR11 long spigot for butt welding or IR-welding

d to be used with: Code € pack n./box

box type

20 VKD - VKR - TKD - SR - RV - VR CVDM11020 3,76 - 350 04






75 VKD CVDM11075 22,82 - 46 02

90 VKD CVDM11090 28,68 - 25 02

110 VKD CVDM11110 34,76 - - -

CVDEEnd Connector SDR11 in PE100 SDR11 long spigot for butt welding or IR-welding


box type

20 VKD - VKR - TKD - SR - RV - VR CVDE11020 See E2 price list - - -






75 VKD CVDE11075 See E2 price list - - -



This article follows the discount of I2-PVCU price list. In case of installation on PP-H valves, the whole valve appears to be PN10.

75

CONNECTIONSPP-H

CONNECTIONS FOR BALL AND ANGLE SEAT VALVES

E5.

15

Flanging Set ISO DIN (PP-H)Standard: DIN 2501 - EN 1092, face to face according to EN558-1 (VKD only). Set composition: 1 flange, 1 locking ring, 1 nut


box type

20 VKD - VKR - TKD - SR - RV - VR SETFLOM020 27,34 - 50 04






Note: factory assembled

Flanging Set ANSI (PP-H)Standard: ANSI B16.5 cl.150#FF. Set composition: 1 flange, 1 locking ring, 1 nut


box type

1/2" VKD - VKR - TKD - SR - RV - VR SETFLOAM012 27,34 - 50 04

3/4" VKD - VKR - TKD - SR - RV - VR SETFLOAM034 31,63 - 37 04

1" VKD - VKR - TKD - SR - RV - VR SETFLOAM100 34,71 - 29 04

1"1/4 VKD - VKR - TKD - SR - RV - VR SETFLOAM114 46,00 - 14 04

1"1/2 VKD - VKR - TKD - SR - RV - VR SETFLOAM112 47,84 - 24 03

2" VKD - VKR - TKD - SR - RV - VR SETFLOAM200 61,13 - 14 03


76


Flanging Set ISO DIN-ANSI (PP-H)Standard: EN1092 / DIN2501 and ANSI B16.5 cl.150#FF face to face according to EN558-1.Set composition: 1 socket flange, 1 spigot end connector, 1 nut


box type

75 - 2"1/2 VKD SETFLOM075 136,16 1 5 04

90 - 3" VKD SETFLOM090 165,44 - - -

110 - 4" VKD SETFLOM110 193,33 1 4 02


ENDIMStandard: ISO metric plain socket for socket welding*


box type

16 VKD - VKR - TKD - SR - RV - VR ENDIM016 7,97 - - -







75 VKD ENDIM075 44,71 - - -

90 VKD ENDIM090 48,79 - - -

110 VKD ENDIM110 67,75 - - -

*One piece

77

CONNECTIONSPP-H

CONNECTIONS FOR BALL AND ANGLE SEAT VALVES

E5.

15

ENDDMStandard: ISO metric plain spigot for socket welding*


box type

20 VKD - VKR - TKD - SR - RV - VR ENDDM020 7,97 - - -







90 VKD ENDDM090 48,79 - - -

110 VKD ENDDM110 67,75 - - -

*One piece

ENDFMStandard: BS parallel socket threaded*

R to be used with: Code € pack n./box

box type

3/8" VKD - VKR - TKD - SR - RV - VR ENDFM038 7,97 - - -



1" VKD - VKR - TKD - SR - RV - VR ENDFM100 10,48 - - -

1"1/4 VKD - VKR - TKD - SR - RV - VR ENDFM114 12,95 - - -

1"1/2 VKD - VKR - TKD - SR - RV - VR ENDFM112 14,90 - - -

2" VKD - VKR - TKD - SR - RV - VR ENDFM200 18,87 - - -

*One piece

78


ENDNMStandard: NPT tapered socket threaded*

R to be used with: Code € pack n./box

box type

1/2" VKD - VKR - TKD - RV - SR- VR ENDNM012 7,97 - - -

3/4" VKD - VKR - TKD - RV - SR- VR ENDNM034 9,48 - - -

1" VKD - VKR - TKD - RV - SR- VR ENDNM100 10,48 - - -

1"1/4 VKD - VKR - TKD - RV - SR- VR ENDNM114 12,95 - - -

1"1/2 VKD - VKR - TKD - RV - SR- VR ENDNM112 14,90 - - -

2" VKD - VKR - TKD - RV - SR- VR ENDNM200 18,87 - - -

*One piece

79

CONNECTIONSPP-H

E5.

15

SPARE AND CONNECTORS FOR TRUE UNION DIPHRAGM VALVES

Q/BIGMPP-H union end for socket welding, metric series *


box type

20 CM-DK-DKL-DKP-DKM QBIGM020 2,42 - - -

25 DK-DKL-DKP-DKM QBIGM025 2,45 - - -





* One piece

Q/BBE-LEnd connector SDR11 in PE100 SDR11 long spigot for butt welding or electrofusion *

d Per utilizzo con valvole serie: Codice € pack Q.tà Cartone

Tipo Cartone

20 CM - DK - DKL - DKP - DKM - DKD QBBEL11020 See EE price list 1 - -

*One piece

80

CONNECTIONSPP-HSPARE AND CONNECTORS FOR TRUE UNION DIPHRAGM VALVES

Q/BBM-LUnion End long spigot for butt welding

d PN10 code SDR 11 - S 5 € pack n./

boxbox

type20 QBBML11020 4,49 - 30 K07

25 QBBML11025 5,40 - 30 K01

32 QBBML11032 6,65 - 30 K01

40 QBBML11040 8,65 - 30 K02

50 QBBML11050 9,12 - 25 K02

63 QBBML11063 13,13 - 15 K02

75 QBBML11075 18,64 - 10 K03

90 QBBML11090 20,80 - 5 K04

110 QBBML11110 27,06 - 5 K05

Q/BBM-CUnion End short spigot for butt welding

d PN10 code SDR 11 - S 5 € pack n./

boxbox

type20 QBBMC11020 4,49 - 30 K07

25 QBBMC11025 5,70 - 30 K01

32 QBBMC11032 5,70 - 30 K01

40 QBBMC11040 9,58 - 30 K02

50 QBBMC11050 9,58 - 25 K02

63 QBBMC11063 10,51 - 15 K02

75 QBBMC11075 14,38 - - K02

90 QBBMC11090 19,63 - - K02

110 QBBMC11110 25,53 - - K05

81

pack n./box

box type

Q.ty of products per Pack 1

Q.ty of products per Carton Box 22

Carton Box type 03

Please note that pack and n/box quantities could be modified during the validity of the price list

Carton box dimensionsBox Tipe L (mm) P (mm) H (mm) Volume (m3)

00 800 600 400 0,1920

01 590 390 500 0,1151

02 590 390 300 0,0690

03 390 290 300 0,0339

04 390 290 200 0,0226

05 295 195 200 0,0115

08 680 600 280 0,1142

K01 200 200 130 0,0052

K02 200 200 200 0,0080

K03 300 200 200 0,0120

K04 300 260 200 0,0156

K05 400 300 200 0,0240

K06 400 300 250 0,0300

K07 200 150 100 0,0030

K08 300 100 100 0,0030

K09 300 260 300 0,0234

K10 400 200 200 0,0160

K11 400 400 130 0,0208

K12 400 400 250 0,0400

K13 400 260 420 0,0437

K14 400 300 250 0,0300

K15 400 300 300 0,0360

K16 400 400 250 0,0400

K17 400 400 300 0,0480

K18 600 400 300 0,0720

K19 600 400 500 0,1200

K20 800 600 350 0,1680

N01 160 160 350 0,0090

N02 170 170 300 0,0087

N03 190 190 300 0,0108

N04 210 210 300 0,0132

N05 220 220 220 0,0106

N06 240 240 240 0,0138

N07 280 280 170 0,0133

N08 300 300 180 0,0162

N09 350 350 130 0,0159

N10 410 410 150 0,0252

N11 470 470 90 0,0199

PACKAGING INFORMATION

H

P L

82

CONDITIONS OF SUPPLY• INTRODUCTORY STATEMENT: our supplies include the products specified in our Sales confirmation and are gover-

ned by the following Terms and Conditions which the Customer declares to understand and to accept, except for possible derogations stated in an explicity written agreement. In particular all foreign supplies will be governed by INCOTERMS, as defined by the International Chamber of Commerce.

• PRODUCTS: to prevent regrettable misunderstandings, it is advisable to refer to the nomenclature and codes of our catalogues and/or price lists for the identification of our products.The items featuring an asterisk (*), though currently on hand, are not included in our wide range of products for which stock rebuild is scheduled. Therefore our order acceptance depends upon the actual availability of the product.

• PACKAGING: to speed-up delivery and to facilitate warehousing at the Customer’s, we reserve the right to convert the ordered quantities into multiples of the standard packages, as shown in our price list next to each item.

• MINIMUM PURCHASE: for orders involving a net amount of less than € 258,23 for Italy: we will charge € 15,49, € 516,46 for other Countries: we will charge € 30,99 as partial recovery of the handling costs.

• PRICES: prices will be those in force at the time when the order was placed, except in case of forward delivery In the latter case, the prices in force at the time of shipment will be invoiced. Our prices include normal packing; spe-cial packing, if required by the customer will be charged at cost price.

• DELIVERY: delivery is intended ex our Warehouse or Stores and is normally prompt, subject to being unsold The anticipated delivery terms for unavailable items will be indicated, but these wjll be in no way binding or firm. If these delivery schedules cannot be kept for any reason whatsoever, the Purchaser can cancel the order only if the delay exceeds three months from the anticipated delivery date stated in our Order Confirmation. After this time lapse, we too shall be entitled to cancel any orders for items which delayed deliveries due to serious production problems.

• SHIPMENT: if the mode of shipment is not specifically indicated by the Customer, shipment will be effected as dee-med most suitable by us Even if the goods are sold free to destination, their transport will be at the Customer’s risk. Insurance coverage will only be effected if specifically requested by the Customer.

• PAYMENT: the Customer cannot, for any reason whatsoever, defer payments beyond the established dates. Furthermore, we shall be fully entitled to charge interests in arrears on any and all delayed payments. These intere-sts will be based upon the discount rate in force at that time in Italy, plus 3 unit % .

- Unless otherwise specified, payments shall be made by opening of an irrevocable credit at call (for Foreign Countries).

- Unless otherwise specified, payment shall be telegraphic transfer not !ater than 30 days after the date of invoicing (for Italy)

• OWNERSHIP CLAUSE: the products supplied by us will remain our property until fully paid for.• GUARANTEE CLAUSE: we guarantee the good quality of our products in compliance with the standards publicized

in our catalogues. However, our guarantee is limited to the repair and/or replacement of our materials, excluding any other liability, in particular for damages caused in any way whatsoever by utilization of our products. This gua-rantee terminates and will be no longer valid:

- one year after the delivery of the material in question; - if the material is used in other way than the operating conditions specified by us; - if the materials are modified by people not belonging to our Company. On this subject, it is should be noted that

the Purchaser will incur all liabilities provided by Law for any modification of our products. We shall be duly informed about any accidents in which our products are involved and such accidents shall be re-

ported to us immediately and within 24 Hours of their occurence.• CLAIMS: only complaints/claims reaching us by registered ietter within 30 days after invoicing date will be taken

into consideration. In particular, we will not accept any materials returned to us, unless their reshipment - free at our warehouses - has been duly authorized by our appropriate executive.

• DISPUTES: any disputes which cannot be amicably settled or settled by a court of arbitration, shall be handled by the Court of Genoa which will have jurisdiction.

• CUSTOMER SERVICE: our Technical and Commercial Services are available to all our Customers to provide any in-formation on the characteristics and application sectors of our products.

The above General Terms and Conditions may be changed without previous notice.All information contained in this collection are given in good faith and are correct at date of publication thereof.The drawings and photographs contained in this price list are provided for illustrative purposes.

FIP Formatura Iniezione Polimeri Loc. Pian di Parata, 16015 Casella Genova Italy

Tel. +39 010 9621.1

Fax +39 010 9621.209

[email protected]

www.fipnet.com

price list e5 - aliaxis-ui.ataliaxis-ui.at/wp-content/uploads/2017/05/e5.15-pp-h-fittings-sw... ·...

Documents