price list 2017 - ytong€¦ · price list 2017 1 additional services technical consultations our...
TRANSCRIPT
1Price list 2017
PRICE LIST2017
The price list is valid from 01 February 2017 to 31 December 2017
YTONG ADVANTAGES
GUARANTEED SOUND INSULATIONThe YTONG MASSIV blocks with increased sound insulation guarantee perfect silence and quietness at home.
HIGH ENERGY EFFICIENCYThe YTONG blocks have the best heat insulation capacity among the commonly used masonry materials in Bulgaria. They ensure more than 10% lower heating bills during the winter and natural coolness during the summer.
HEALTHY MICROCLIMATEYTONG is a “breathe” material. Moisture is not accumu-lated in the walls and the air in the room remains always fresh.
FIRE SAFETYYTONG is 100% non-flammable. In case of fire it does not emit harmful substances and limits the spread of fire.
GERMAN QUALITYThe YTONG blocks are produced with guaranteed and per-manent characteristics. They are subject to continuous con-trol by independent laboratories.
FREEDOM OF FANTASYThe YTONG blocks are cut and ground extremely easily, also the most unusual ideas about shaping of the home may be implemented with them.
LONG LIFEYTONG is used in the construction worldwide for more than 90 years. The practice shows that it does not age and it does not change its properties over the years.
ECONOMICAL AND SAFE CONSTRUCTIONThe YTONG blocks are processed easily and allow quick building of plain walls with low consumption of adhesive and small amount of finishing works. YTONG increases the safety and the earthquake resistance due to the smaller weight of the masonries.
MORE SPACE AT HOMEThe excellent heat insulation properties of YTONG blocks allow building of exterior walls with smaller thickness com-pared to the ceramic bricks. Thus, a house with 100 m2 area increases its living area with about 3 m2.
ECOLOGICAL MATERIALYTONG is produced from natural raw materials — lime, cement, sand and water. It creates healthy life conditions in the buildings. YTONG is fully recyclable and contributes to the preservation of the natural ecosystems.
1Price list 2017
ADDITIONAL SERVICES
TECHNICAL CONSULTATIONS
Our technical department is available for free consultations both on phone and in-situ at each stage of the construction.
Call us and engage our instructors for free training or demonstration regarding the application of YTONG and Multipor products.
TRAININGS AND DEMONSTRATIONS
In our CD you will find special information about our products, including architectural details, calculation software for the thermal conductivity of the wall structures and films about work with YTONG and Multipor.
CD INSTRUCTIONS
DELIVERY OF YTONG EXPRESS
Call our regional sales managers to receive the desired products in the shortest time.
CALCULATORBy YTONG calculator you can calculate the materials for your masonries, compare different variants and their advantages, and choose a solution suitable for you. By Multipor calculator you can easily determine what insulation thickness is necessary to reduce your heating bill.
“Your home” construction program offers not only a ready architectural design but a complete solution for fast and qualitative building of a family house with clear time limits and prices.
“YOUR HOME” CONSTRUCTION PROGRAM
Special tools for work with YTONG and Multipor are invented. Their usage makes the workers job easier, increase the labour productivity and guarantees optimal consumption of adhesive.
TOOLS
Increase the labour productivity and the masonry quality by renting a band saw from us. The minimum time limit is 1 week, and for a period of more than a month the transportation to and from your site is free of charge.
BAND SAW
2
YTONG KLASSIK (B2.5, D440) - small packages***
CHARACTERISTICS PACKAGING PRICE
Dimensions(thickness, length,
height)
Shapingof the front
sidesQuantity Volume
Area ofthe masonry in 1 pallet
Smallpackages in
1 pallet
Blocks in1 small pack-
age
Area ofthe masonry
in 1 smallpackage
Transporta-tion
weight*
Price of
1 m3
Priceof
1 pallet
mm pcs./pallet m3/pallet m2 pcs. pcs. m2 kg/pallet BGN BGN
75х600х250 smooth 108 1.215 16.2 36 3 0.45 815 145.00 176.18 50х600х250 180 1.35 27 36 5 0.75 905 145.00 195.75
YTONG THERMO (B2, D350)
CHARACTERISTICS PACKAGING PRICE
Dimensions(thickness, length,
height)
Shapingof the front
sidesDensity
Com-pressive strength
Coefficient ofthermal conductiv-
ity (λ)Quantity Volume
Area ofthe masonry in 1 pallet
Transportation weight*
Priceof
1 m3
Priceof
1 pallet
mm kg/m3 MPa W/(m•K) pcs./pallet m3/pallet m2 kg/pallet BGN BGN
350х600х250 smooth,groove and
tongue(N+F)
350±20 2 0.09
24 1.26 3.6 680 127.00 160.02 300х600х250 30 1.35 4.5 730 127.00 171.45 250х600х250 36 1.35 5.4 730 127.00 171.45 200х600х250 42 1.26 6.3 680 127.00 160.02
Blocks for building ofenergy efficient exterior walls
Blocks with generalpurpose
YTONG KLASSIK (B2,5 D440)
CHARACTERISTICS PACKAGING PRICE
Dimensions(thickness, length,
height)
Shapingof the front
sidesDensity
Com-pressive strength
Coefficient ofthermal conductiv-
ity (λ)Quantity Volume
Area ofthe masonry in 1 pallet
Transportation weight*
Priceof
1 m3
Priceof
1 pallet
mm kg/m3 MPa W/(m•K) pcs./pallet m3/pallet m2 kg/pallet BGN BGN
300х600х250
smooth,groove and
tongue(N+F) 440±20 2.5 0.12
30 1.35 4.5 905 117.00 157.95 250х600х250 36 1.35 5.4 905 117.00 157.95 200х600х250 42 1.26 6.3 845 117.00 147.42 175х600х250 48 1.26 7.2 845 121.00 152.46 150х600х250 60 1.35 9.0 905 121.00 163.35 125х600х250 72 1.35 10.8 905 121.00 163.35 100х600х250 90 1.35 13.5 905 121.00 163.35 75/100х600х250
smooth102/12** 1.33 15.3/1.8 890 125.00 166.25
50/100х600х250 156/12** 1.35 23.4/1.8 905 125.00 168.75
TECHNICAL CHARACTERISTICS AND PRICES
The small packages are more comfortable for carrying and are especially appropriate for home repair works.The blocks are perfectly protected during transportation and storage.
All specified prices are EXW, without VAT.
! Always 6.67 blocks are necessary for the construction of 1 m2 wall, notwithstanding the thickness.
! Always 6.67 blocks are necessary for the construction of 1 m2 wall, notwithstanding the thickness.
! Always 6.67 blocks are necessary for the construction of 1 m2 wall, notwithstanding the thickness.
3Price list 2017 All specified prices are EXW, without VAT.
Blocks for building ofinternal wallswith improved sound insulation or for building of bearing walls
* The wooden grid, on which the blocks are placed, is included in the transportation weight.**The pallet includes also 12 blocks with thickness 100 mm, arranged as first and last row.*** It is not kept in stock. Small packages are produced only after advance payment and agreed upon time for delivery.
The minimum amount to order is 1 truck with load of 24 t.The reference prices for transportation from the factories of KSELA Bulgaria Ltd. to different settlements can be found on the last page.KSELA Bulgaria Ltd. sells the produced products via a distribution network. KSELA Bulgaria Ltd. reserves the right to modify the information in this brochure at any time.
YTONG MASSIV (B5, D700)
CHARACTERISTICS PACKAGING PRICE
Dimensions(thickness, length,
height)
Shaping of the front
sidesDensity
Compressive strength
Coefficient ofthermal conductiv-
ity (λ)Quantity Volume
Area ofthe masonry in 1 pallet
Transportation weight*
Priceof
1 m3
Priceof
1 pallet
mm kg/m3 MPa W/(m•K) pcs./pallet m3/pallet m2 kg/pallet BGN BGN
250х600х250
smooth 700±50 5 0.18
36 1.35 5.4 1260 126.00 170.10 200х600х250 42 1.26 6.3 1180 126.00 158.76 175х600х250 48 1.26 7.2 1180 134.00 168.84 150х600х250 60 1.35 9.0 1260 134.00 180.90 125х600х250 72 1.35 10.8 1260 134.00 180.90 100х600х250 90 1.35 13.5 1260 134.00 180.90 75/100х600х250 102/12** 1.33 15.3/1.8 1240 144.00 191.52 50/100х600х250 156/12** 1.35 23.4/1.8 1260 144.00 194.40
! Always 6.67 blocks are necessary for the construction of 1 m2 wall, notwithstanding the thickness.
4
NON-LOAD BEARING LINTELS for bridging of openings for doors and windows
CHARACTERISTICS PACKAGING PRICE
Dimensions(thickness, length,
height)
Shaping of the front
sidesDensity
Com-pressive strength
Coefficient ofthermal conductiv-
ity (λ)
Dimensions ofthe cross section
QuantityTransporta-
tion weight*
Priceof
1 piece
Priceof
1 palletd h
mm kg/m3 MPa W/(m•K) mm mm pcs./pallet kg/pallet BGN BGN
100х1000х250
100 250
36 660 11.21 403.56 100х1200х250 36 805 13.45 484.20 100х1500х250 36 985 16.82 605.52 100х1800х250 36 1185 20.18 726.48 100х2000х250 36 1310 22.42 807.12 125х1000х250
smooth 440±20 2.5 0.15 125 250
27 595 11.93 322.11 125х1200х250 27 705 14.32 386.64 125х1500х250 27 880 17.90 483.30 125х1800х250 27 1055 21.47 579.69 125х2000х250 27 1175 23.86 644.22 150х1000х250
150 250
24 615 12.76 306.24 150х1200х250 24 720 15.31 367.44 150х1500х250 24 900 19.14 459.36 150х1800х250 24 1080 22.97 551.28 150х2000х250 24 1200 25.52 612.48
CHANNEL SHAPED BLOCKS for pouring without formwork of reinforced concrete belts
CHARACTERISTICS PACKAGING PRICE
Dimensions(thickness, length,
height)
Shaping of the front
sidesDensity
Com-pressive strength
Coefficient ofthermal conductiv-
ity (λ)
Dimensions of the crosssection
QuantityTransporta-
tion weight*
Priceof
1 piece
Priceof
1 palletd h
mm kg/m3 MPa W/(m•K) mm mm pcs./pallet kg/pallet BGN BGN
350х600х250
smooth 440±20 2.5 0.12
350 250 20 365 8.72 174.40
300х600х250 300 250 20 335 7.80 156.00
250х600х250 250 250 30 450 6.89 206.70
200х600х250 200 250 40 535 5.97 238.80
ADDITIONAL PRODUCTS
The non-load bearing lintels and the channel shaped blocks are produced upon request in advance.
All specified prices are EXW, without VAT.
5Price list 2017
* The wooden grid, on which the blocks are placed, is included in the transportation weight.
BLOCKS WITH OPENINGS for pouring without formwork of reinforced concrete columns and vertical belts
CHARACTERISTICS PACKAGING PRICE
Dimensions(thickness, length,
height)
Shaping of the front
sidesDensity Com-
pressive strength
Coefficient ofthermal conductiv-
ity (λ)
Diameterof
opening
Thicknessof the wall
of the opening
Quantity Transporta-tion
weight*
Priceof
1 piece
Priceof
1 pallet
mm kg/m3 MPa W/(m•K) mm mm pcs./pallet kg/pallet BGN BGN
350х600х250
smooth 350±20 2 0.09
250 50 24 530 7.35 176.40
300х600х250 200 50 30 600 6.30 189.00
250х600х250 160 45 36 625 5.25 189.00
YTONG adhesive masonry mortar, in bags of 20 kg each
Thickness ofplacement
Consumption ratePrice of
1 kg
Price of 1 bag20 kg
Blocks with smooth faceBlocks with groove and
tongue
mm kg/m3 kg/m3 BGN/kg BGN/bag
1 ÷ 3 15 11 0.26 5.20
All specified prices are EXW, without VAT.
www.dom.ytong.bg
The new website ofENERGY EFFICIENCY HOUSES Program
www.shop.ytong.bg
6
Agitator for adhesive mortar
Three sidedright angle
Notched blade Board with abrasive paper
Groove digger a set Flat drill forelectric boxes
Rubber hammer Planer for YTONG
Dowels for YTONGFisher type
Drill with long shank
mm BGN 75 – 8.84 100 – 8.84 125 – 8.84 150 – 9.30 175 – 9.77 200 – 10.23 250 – 10.70 300 – 11.50 350 – 12.00
GB 14 – 1.58 BGN
20х350 mm – 10.70 BGN
30х350 mm – 10.70 BGN
50х350 mm – 11.63 BGN
65 mm – 8.37 BGN
75 mm – 8.84 BGN
9.30BGN/pcs.
11.16BGN/pcs.
13.95 BGN/pcs.
10.23BGN/pcs.
8.84BGN/pcs.
19.07 BGN/pcs.
TOOLS FOR WORK WITH YTONG
Bank saw
0.5 kg – 9.77 BGN
1.0 kg – 11.16 BGN
Saw
11 hard melt plates – 23.25 BGN13 hard melt plates – 28.83 BGN18 hard melt plates – 39.06 BGN
Lifting bracketsFlat anchor with screw
1.25BGN/pcs.
Price
upon
request
All specified prices are EXW, without VAT.
7Price list 2017
9Price list 2017 8
LAYERS
Standardweight
HEAT INSULATION SOUND INSULATION
1. Internallime-cement or gypsum plaster
2. Wall ofYTONG MASSIV B5, D700
λ10,dry = 0,18 W/(m•K)
3. Internallime-cement or gypsum plaster
— — Totalthickness of
the wall
Coefficient ofthermal conductivity
(calculated for λ10,dry ofYTONG MASSIV B5, D700)
Resistance ofthermal conductivity
(calculated for λ10,dry ofYTONG MASSIV B5, D700)
Weighted sound reduction indexof the insulation
(without transfer through bypass paths)
thickness thickness thickness — — U R RW
cm cm cm — — cm kg/m2 W/(m2•K) (m2•K)/W dB1.0 15.0 1.0 — — 17.0 157 0.893 1.12 47
LAYERS
Standardweight
HEAT INSULATION SOUND INSULATION
1. Externallime-cement
plaster
2. Wall ofYTONG THERMO (B2, D350)
λ10,dry = 0,09 W/(m•K)
3. Internallime-cement or gypsum plaster
— — Totalthickness of
the wall
Coefficient of thermal conductivity
(calculated for λ10,dry of
YTONG THERMO B2, D350)
Resistance ofthermal conductivity
(calculated for λ10,dry of YTONG THERMO B2, D350)
Weighted sound reduction indexof the insulation
(without transfer through bypass paths)
thickness thickness thickness — — U R RW
cm cm cm — — cm kg/m2 W/(m2•K) (m2•K)/W dB1.5 35.0 1.0 — — 37.5 183 0.244 4.09 49
ARCHITECTURAL DESIGNS
EXTERIOR WALLS
LAYERS
Standardweight
HEAT INSULATION SOUND INSULATION
1. A mortar for adhesion and plastering
of Multipor
2. Heat insulation plates Multipor
3. A mortar for adhesion and plastering
of Multipor
4. Wall ofYTONG KLASSIK B2.5, D440
λ10,dry = 0,12 W/(m•K)
5. InternalLime-cement orgypsum plaster
Totalthickness of
the wall
Coefficient ofthermal conductivity
(calculated for λ10,dry ofYTONG KLASSIK B2.5, D440)
Resistance ofthermal conductivity
(calculated for λ10,dry ofYTONG KLASSIK B2.5, D440)
Weighted sound reduction indexof the insulation
(without transfer through bypass paths)
thickness thickness thickness thickness thickness U R RW
cm cm cm cm cm cm kg/m2 W/(m2•K) (m2•K)/W dB0.6 7.5 0.5 25.0 1.0 34.6 159 0.246 4.06 48
LAYERS
Standardweight
HEAT INSULATION SOUND INSULATION
1. A mortar for adhesion and plastering
of Multipor
2. Heat insulation plates Multipor
3. A mortar for adhesion and plastering
of Multipor
4. Wall ofYTONG MASSIV B5, D700
λ10,dry = 0,18 W/(m•K)
5. InternalLime-cement orgypsum plaster
Totalthickness of
the wall
Coefficient ofthermal conductivity
(calculated for λ10,dry ofYTONG MASSIV B5, D700)
Resistance ofthermal conductivity
(calculated for λ10,dry ofYTONG MASSIV B5, D700)
Weighted sound reduction indexof the insulation
(without transfer through bypass paths)
thickness thickness thickness thickness thickness U R RW
cm cm cm cm cm cm kg/m2 W/(m2•K) (m2•K)/W dB0.6 12.5 0.5 20.0 1.0 34.6 207 0.235 4.25 50
INTERNAL WALLS
LAYERS
Standardweight
HEAT INSULATION SOUND INSULATION
1. Internallime-cement or gypsum plaster
2. Wall ofYTONG MASSIV B5, D700
λ10,dry = 0,18 W/(m•K)
3. Internallime-cement or gypsum plaster
— — Totalthickness of
the wall
Coefficient ofthermal conductivity
(calculated for λ10,dry ofYTONG MASSIV B5, D700)
Resistance ofthermal conductivity
(calculated for λ10,dry ofYTONG MASSIV B5, D700)
Weighted sound reduction indexof the insulation
(without transfer through bypass paths)
thickness thickness thickness — — U R RW
cm cm cm — — cm kg/m2 W/(m2•K) (m2•K)/W dB1.0 20.0 1.0 — — 22.0 198 0.714 1.40 50
LAYERS
Standardweight
HEAT INSULATION SOUND INSULATION
1. Internallime-cement or gypsum plaster
2. Wall ofYTONG MASSIV B5, D700
λ10,dry = 0,18 W/(m•K)
3. Internallime-cement or gypsum plaster
— — Totalthickness of
the wall
Coefficient ofthermal conductivity
(calculated for λ10,dry ofYTONG MASSIV B5, D700)
Resistance ofthermal conductivity
(calculated for λ10,dry ofYTONG MASSIV B5, D700)
Weighted sound reduction indexof the insulation
(without transfer through bypass paths)
thickness thickness thickness — — U R RW
cm cm cm — — cm kg/m2 W/(m2•K) (m2•K)/W dB1.0 12.5 1.0 — — 14.5 136 1.02 0.983 44
External lime-cementplasterλu = 0.87 W/(m•K)
Internal lime-cementor gypsum plasterλu = 0.70 W/(m•K)
A mortar for adhesion andplastering of Multiporλu = 0.235 W/(m•K)
Heat insulation platesMultiporλu = 0.043 W/(m•K)
External lime-cementplaster1800 kg/m3
Internal lime-cementor gypsum plaster1600 kg/m3
A mortar for adhesion andplastering of Multipor850 kg/m3
Heat insulationplates Multipor115 kg/m3
10
mineral composition
recyclable
breathing ecological heat insulating
sound absorbing firmsurface
easy for processing
non-flammable
guarantee ofquality
MULTIPOR HEAT INSULATION SYSTEM
Application
Placement of mortar on the surface of MULTIPOR plates.
2Placement and sliding of the plate.
3Mixing of MULTIPOR adhesion mortar.
1
MULTIPOR for internal insulation of ceilings
11Price list 2017
Mortar for MULTIPOR, in bags of 20 kg
Thickness ofplacement
Consumption rate Pieces per pallet Price of1 kg
Price of 1 bag20 kg
Adhesion Plastering
mm kg/m2 kg/m2 pcs. BGN/kg BGN/bag
5 ÷ 6 3.5÷4 3.5÷4 40 1.15 23.00
Heat insulation plates MULTIPOR
CHARACTERISTICS PACKAGING PRICE
Dimensions(thickness, length,
height)Density
Com-pressive strength
Coefficient ofthermal conductiv-
ity (λ)
Quantity VolumeArea of
the masonry in 1 pallet
Smallpackages in
1 pallet
Transporta-tion
weight*
Price of1 m2
Price of1 m3
Price of1 pallet
mm kg/m3 MPa W/(m•K) pcs./pallet m3/pallet m2 pcs. kg/pallet BGN/m2 BGN/m3 BGN/pallet
50х600х500
100÷115 350 0.043
120 1.80 36.00 24 310 9.75 195.00 351.0075х600х500 80 1.80 24.00 16 310 13.88 185.00 333.00
100х600х500 64 1.92 19.20 16 330 18.50 185.00 355.20125х600х500 48 1.80 14.40 — 310 22.50 180.00 324.00150х600х500 40 1.80 12.00 — 310 27.00 180.00 324.00175х600х500 32 1.68 9.60 — 290 30.63 175.00 294.00200х600х500 32 1.92 9.60 — 330 35.00 175.00 336.00250х600х500 24 1.80 7.20 — 310 43.75 175.00 315.00300х600х500 18 1.62 5.40 — 280 52.50 175.00 283.50
Multipor drip edge profilewith visible edge – VLT-2H, 2.50 m
Multipor angular profilewith mesh – LK, 2.50 m
Multipor window profilewith mesh US8, 2.40 m
Multipor separating insulation band 25 m (100/5 mm)
26.50BGN/pcs.
1.45BGN/m2
Mesh for Multipor 145 g/m2, width 1.10 m
1.90BGN/m
0.90BGN/m
1.85BGN/m
! Always 3.33 plates are necessary for the insulation of 1 m2, notwithstanding the thickness.* The wooden grid, on which the plates are placed, is included in the transportation weight.
All specified prices are EXW, without VAT.
12
TOOLS FOR WORK
ADDITIONAL ELEMENTS FROM MULTIPOR
7.00BGN/pcs.
24.00BGN/pcs.
Notched small plaster's hawk(notch 12, 16 and 20 mm)
Notched big plaster's hawk(notch 12, 16 and 20 mm)
Graduated bucket for mortarPlaner for Multipor
Anchor for insulationSTR U
Spiral dowel
mm BGN 115 - 0.65 135 - 0.75 155 - 0.85 175 - 0.95 195 - 1.10 215 - 1.30 235 - 1.50 255 - 1.70 275 - 1.90 295 - 2.10
mm BGN
50 - 0.45 85 - 0.60 120 - 0.70
mm BGN
125 - 1.50 150 - 1.80 200 - 2.40
Multipor adjustablejunction box 50-70 mm
Multipor extender forjunction box 35-50mm
Multipor telescopic box forwall sockets 80-170 mm
Multipor telescopic barsel. equipment 80-160 mm
3.50BGN/pcs.
10.50BGN/pcs.
22.50BGN/pcs.
23.00BGN/pcs.
9.60BGN/pcs.
14.70BGN/pcs.
Steel anchor for insulation DDS-DDT
All specified prices are EXW, without VAT.
Plates for shaping of openings (pages) - 25х600х500 mm - 250 BGN/m3
Wedge-like plates for insulation of thermal bridges (for internal insulation) - 25/75х600х500 mm - 250 BGN/m3
Produced upon request in advance.
Flat anchor with screw
1.25BGN/pcs.
NEW
REFERENCE PRICES FOR TRANSPORTATION,
District Price of transportationunit
Price BGN/m3
YTONG THERMO (D 350)(34 pallet)
Price BGN/m3
YTONG KLASSIK (D 440)(26 pallet)
Price BGN/m3
YTONG MASSIV (D 700)(18 pallet)
Sofia - city 150 3.30 4.20 6.00
Sofia - Province 150 3.50 4.30 6.20
Blagoevgrad 240 5.55 6.85 9.90
Burgas 300 6.95 7.95 12.35
Veliko Tarnovo 380 8.80 10.00 15.65
Varna 140 3.25 3.70 5.75
Vidin 340 7.85 9.70 14.00
Vratsa 240 5.55 6.85 9.90
Gabrovo 340 7.90 9.70 14.00
Dobrich 60 1.40 3.70 2.50
Kardzhali 380 8.80 10.85 15.65
Kyustendil 200 4.65 5.70 8.20
Lovech 260 6.00 7.40 10.70
Montana 250 5.80 7.10 10.30
Pazardzhik 200 4.65 5.70 8.25
Pernik 150 3.45 4.30 6.20
Pleven 250 5.80 7.10 10.30
Plovdiv 240 5.55 6.85 9.90
Razgrad 300 6.95 7.95 12.35
Ruse 320 7.40 8.50 13.20
Silistra 200 4.65 5.30 8.25
Sliven 380 8.80 10.00 15.65
Smolyan 400 9.25 11.40 16.45
Stara Zagora 320 7.40 9.10 13.20
Targovishte 280 6.50 7.40 11.50
Haskovo 320 7.40 9.10 13.15
Shumen 240 5.55 6.35 9.90
Yambol 380 8.80 10.00 15.65
* For transportation units with capacity different from the above specified, you may receive information on 058 / 655 922, Sales Department, as well as via email at [email protected].
organized by KSELA Bulgaria LTD
Note: The time for delivery is 3 working days from the date of receiving a request in writing.
All specified prices are without VAT and include loading.
14
Edit
ion
: Jan
uar
y 20
17
Vidin
MontanaPleven
Vratsa Lovech
Sofia
Veliko Tarnovo
Ruse
Silistra
Razgrad
Shumen
Varna
Dobrich
Sliven
Burgas
Yambol
Haskovo
Kardzhali
Gabrovo
Targovishte
Stara Zagora
Plovdiv
Smolyan
Pazardzhik
Blagoevgrad
Kyustendil
Pernik
FACTORY SOFIA
Sofia 1870Kremikovtsi Industrial Zone
FACTORY DOBRICH
Dobrich 930060, 3-ti mart Blvd.
XELLA Bulgaria EOOD
Key account Manager
Borislav Diviziev 088/887 76 01
Regional Sales Managers
West Bulgaria
eng. Alexandar Topalov 088/609 93 52
eng. Yancho Lutskanov 088/828 42 34
Central North Bulgaria
eng. Venelin Vassilev 088/827 97 11
Sentral South Bulgaria
Vasil Kokudev 088/828 67 53
North-East Bulgaria
eng. Deyan Stefanov 088/588 80 44
South-East Bulgaria
Petar Draganov 088/720 23 05
Sales:
Sofia: 02/ 819 33 43 088/ 828 26 11
Dobrich 058/ 65 59 22 088/ 750 75 65 факс 058/ 65 59 00
Technical consultation:
Interent websites:
www.ytong.bg
www.multipor.bg
088/ 828 73 69
088/828 46 61