price list 05.01.2011 3 - prakash electric...

LT MOTORSPrice List

(Effective From 05-01-2011)(Price List No. LTM/005 Dated 05.01.2011)

Regd. Office : CG House, 6th Floor, Dr. Annie Besant Road, Worli, Mumbai - 400 030.

AC MOTORS

ALTERNATORS

DC MOTORS

SPECIAL FEATURES

OFFERED

SR. No. TITLES PAGE No.

1) PRICE LIST - SPECIAL FEATURES OFFERED FOR AC MOTORS 1-8

2) PRICE LIST - TEFC SCR EFFICIENCY LEVEL 2 FOOT MOUNTED 9-10

3) PRICE LIST - TEFC SCR EFFICIENCY LEVEL 2 FLANGE MOUNTED 11-12

4) PRICE LIST - TEFC SCR EFFICIENCY LEVEL 1 FOOT MOUNTED 13-14

5) PRICE LIST - TEFC SR FOOT MOUNTED 15-16

6) PRICE LIST - TEFC BRAKE S1 DUTY 17

7) PRICE LIST - TEFC BRAKE S4 DUTY 18

8) PRICE LIST - SPDP SR FOOT MOUNTED 19-20

9) PRICE LIST - FLP SCR FOOT MOUNTED 21-22

10) PRICE LIST - FLP SCR FLANGE MOUNTED 23-24

11) RATING LIST - FLP MOTORS IN E355LX FRAME 25

12) PRICE LIST - TEFC CRANE DUTY MOTORS 26

13) PRICE LIST - TEXTILE 27-28

14) PRICE LIST - DOUBLE CIRCUIT 29

15) PRICE LIST - ALTERNATORS 30-32

16) PRICE LIST FOR DC MOTORS 33-34

17) TERMS AND CONDITIONS 35

INDEXPRICE LIST FOR AC MOTORS(Effective from 05.01.2011)( Price List No LTM/005 05.01.11)

PRICE LIST INDEX


Sr. No Description Cash Extras

1 Motors dispatch under Nil Excise Duty

1. Dispatch under CT3 bond 6 % 2. Dispatch under any government project notification ( Please get a As applicable - Please

prior confirmation for cash extra and suitability of notification and get a confirmationformat of certificate from Division from Division

3. Dispatch under CT1 and ARE1 forms Nil

In the event of exemption of excise duty under any of the above, approved ARE3 or rewarehousing certificate or proof of export or any documents as required by excise authority is required within 60 days of dispatch, failure to furnish this, the excise duty will be debited to customer/dealer along with the interest and penalty

Sr. No Description Cash Extras

ELECTRICAL FEATURES

1. VOLTAGE

Base voltage between 220 - 550 V( Typical base voltages : 220,380,400,415,440,500, 525,550 ) NoOther than above voltages 3%Dual voltage: 220 D / 380 Y or 380D / 660 Y & (1: N3 ratio) NoDual voltage : with ratio 1:2 eg. 220 / 440 3%Triple voltage : ( 220/380/440 ) 3%

2. FREQUENCYBase frequency of 50 hz or 60 hz No50/60 Hz motors for export No

3. VARIABLE VOLTAGE /VARIABLE FREQUENCY OPERATED MOTORS:

OR/AND VACCUM PRESSURE IMPREGNATION TREATMENT(VPI)

(ALSO KNOWN AS POWER HOUSE TREATMENT)

63 to 132 3% sub to max Rs. 3000/-160 to 250 5% sub to max Rs. 3500/-280 & above Nil

A) Variable torque operation - Standard frame sizes suitable for following specifications:Variable torque operation, Type of application: pump/fan/blowerLoad torque speed curve : parabolic. Speed range =10% to 100%Harmonic contents < 5% & temperature rise limited to class F rise

B) Constant torque operation Frame size suitable for following specifications

Speed range 50% to 100 % , Temperature rise limited to class F rise

Typical applications- Printing, Packaging , Paper industry or as per customer

requirement

Frame size logic Double of kW rating

E.g. 11kw 4 pole Motor 11kW x 2 = 22kW Hence frame size 180 L

Refer circular by Design Dept/ write up in Catalogue No LTM/Cat/01/Dec 2009

COMMERCIAL

PRICE LIST FOR CASH EXTRAS FOR SPECIAL FEATURES OFFERED FOR AC MOTORS

1) All % (per-centage)figures are to be loaded on list price. 2) All Rs. figures are to be added on nett price,3) Inspection charges are subject to excise & taxes


1

AC MOTORS SPECIAL FEATURES


1) All % (per-centage)figures are to be loaded on list price.2)All Rs figures are to be added on nett price,3) Inspection charges are subject to excise & taxes


2

AC MOTORS

4. 9 LEAD/ 12 LEADS 3 %0

5. AMBIENT TEMPERATURE -30 TO + 65 C. List price as per selected frame.

6. Temperature rise as per class F: NoFor (ambient + rise )= 145 C, output can be uprated by 10%eg. Output= 55 kW in frame ND250M with amb+rise =120 C. With amb+rise=145 C,maximum output in ND250M = 55*1.1 = 60.5 ( Not applicable for type 'e' & type 'n' motors.)Insulation class ' H ' 10 %

7. 5 %

8. Efficiency level 1 Motors Refer separate price list ref LTM/005In case not in price list, please refer following

Frames63 to 160 15%180 to 250 10%280 5%315 to 355 1%400 / 450 Refer to Division

MECHANICAL FEATURES: 1 MOUNTING

A) Only V1 and B5 (Only for TEFC & FLP SQ Cage Motors ) Refer price list LTM/005

Extra prices for the ratings not covered in price listFrame 63 to 160 NoFrame 180 to 400 5%

B) Balance all types of mounting other than B3 ,V1 and B5 for SQ Cage and all mounting other than B3 for Slipring motors

Frames 63 to 160 3%Frames 180 to 400 5%

2 FORCED COOLING ARRANGEMENT(FRAME 200 AND ABOVE TEFC ONLY)ND 200 TO 225 Rs. 14500/-ND 250 Rs. 22000/-ND 280 Rs. 27000/-ND 315 S/M/L Rs. 30000/-ND 355 / 400 Rs. 49000/-ND 450 Rs. 57000/-

3 CI FANS No Extra

4 SPECIAL FIXING DIMENSIONS OTHER THAN IS 1231/2223. 15% of ALPdelivery 8 weeks extra to

To be offered for TEFC SCR/ SR motors for frame 160 and above. SDT( shall be offered with fabricated stator body) Please refer to division for concurrence

0

0 0

NON STANDARD RV/RA FOR SLIPRING MOTORS ( Pl take prior Division

confirmation for RV/RA )

SPECIAL FEATURES

5 NEMA BODY MOTORS (Only for dimensions, performance as per IEC ) 10 % over equivalent

IEC Frame NEMA Frame IEC Frame NEMA Frame IEC Motors of same

90S END 143T 180M END 284T KW and Polarity

90L END 145T 180L END 286T

112M END 184T 200L END 324T

132S END 213T 225S END 364T

132M END 215T 225M END 365T

160M END 254T 250M END 405T

160L END 256T 280S END 444T

280M END 447T

6 Fabricated stator body but fixing dimensions as per IS for frame 160 & above 15% of ALP

(ND frames only) Delivery 8 weeks extra to

SDT

7 CUSTOM SIZE FABRICATED TERMINAL BOX 3% ALP subject to Max

One size higher box can be supplied for TEFC SCR motors as per table below 7400/- Rs. extra per motor.

For higher cable size than below please refer to division.

Frame Maximum cable size

With standard T. Box With one size higher T. Box

160-200 2 X 3C X 35 2 X 3C X 95

225-280 2 X 3C X 95 2 X 3C X 240

315 S/M 2 X 3C X 240 2 X 3C X 300

315L 2 X 3CX 240 2 X 3C X 300

8 DOUBLE TERMINAL BOX FOR SLIPRING MOTORS

Frames 315 & 355 Std TEFC Rs. 4500

Frame 400 TEFC Nil

9 FLYING LEADS ( upto 1 meter & 6 leads), W/O T. Box No

Frames 160 to ND 400

10 SPECIAL SHAFT EXTENSION

Standard double shaft extension (DE/NDE identical) 5%

Non standard single /double shaft with diameter and length less than standard 10%

Dimensions (This feature is not offered in FLP SR and SPDP SR enclosures.)

For D or E more than IS , please refer to division.

Taper single shaft extension taper 1: 10 5%

Taper double shaft extension taper 1: 10 10%

For taper other than the above, Refer to Division

Special shaft material EN 24 grade 10% extra price & extra

delivery of 4 weeks.

Stainless steel shaft (Upto & including 180 Frame) 15% extra price & extra

delivery of 4 weeks.




3


11 SPECIAL BEARINGSOnline greasable bearings for frame 160-225 (Our standard bearings are Rs. 800/- per motor greased for life.) (To be agreed for projects only if Sealed bearings are 4 weeks extra delivery not acceptable) Regreasable bearings are provided as a standard for frame 250 and above & C225M frame.

C4 clearance bearings in frame 160-355 Rs. 3000/- per motor10 Weeks extra del.

Angular contact / axial thrust bearings for 160-355 frame. Please refer to division& please furnish axial thrust in kg & direction of axial thrust - toward/away from motor.

12 BEARING INSULATION ARRANGEMENT ( ONLY ONE SIDE )FRAME 225 TO 250 Rs. 12000/-FRAME 280 TO 315 Rs. 14000/-FRAME 355 Rs. 16000/-

ROLLER BEARING ARRANGEMENT ON DE SIDEFRAMES 160 TO 180 Rs. 1400/-FRAMES 200 TO 250 Rs. 2600/-FRAMES 280 TO 315 Rs. 3600/-FRAMES 355 TO 400 Rs. 4500/-Bearing size other than standard: Please refer to division.

13 Degree of protection as per IS 4691-1968IP 56 , IP65 for TEFC SCR motors in frame 160-315 5% of ALP.( No certification and testing for above )

14 FAULT LEVEL : Agreed for maximum through fault level 50 kA for 0.25 sec. Rs. 35000/-Please refer to division for higher fault level.(Charges include price for special terminal box and certification charges)

15 Tacho mounting arrangement for frame 160 - 400 TEFC SCR motors. For other frames refer to division

FRAME 160 TO 280 Rs. 3000/- per motorFRAME 315 TO 400 Rs 3500/- per motor

FOLLOWING TABLE FOR PRICES OF INSULATED BEARINGS

Refer catalogue for correlation of bearings with frame/polarity




4

AC MOTORS

Bearing Type Price in Rs.

6314

6315

6316

6318

6319

6321

6322

6326

34000

34000

34000

29000

37000

82000

40000

87000

SPECIAL FEATURES


1) All % (per-centage)figures are to be loaded on list price.2) All Rs. figures are to be added on nett price,3) Inspection charges are subject to excise & taxes Regd. Office : CG House, 6th Floor, Dr. Annie Besant Road, Worli, Mumbai - 400 030.

5

AC MOTORS

16 Motors with brake : For TEFC SCR motorsFor motors with brake arrangement but without brake: 20% of ALPFor motors with brake arrangement & brake: 20% of ALP plus price forBrake specifications: brake as per table belowBrake type 14.448 Emco Lenze DC failsafe brake with solid state rectifierMotor mounting : B3 or B5

Soild state rectifier specification:A. 415 V AC TO 24 V DCB. 415 V AC TO 96 V DC C. 415 V AC TO 190 V DCFRAME BRAKING TORQUE N-M BRAKE SIZE extra price for brakeND160M/L 150 N-M 18 Rs. 23000/-ND180M/L 360 N-M 25 Rs. 29000/-

Please Rs. 50000/-furnish braking torque & required braking time to check suitability of shaft material.

17 Terminal box position : (for foot or foot cum flange mounted motors) NoEnclosure possible position from DETEFC SCR/SR RHS,LHS,TOPFLAMEPROOF SCR -E160-E315M RHS/LHSFLAMEPROOF SCR- E315L TOPFLAMEPROOF SR -EW250-315M STATOR - RHS

ROTOR - LHSFLAMEPROOF SR -EW315L STATOR - TOP

ROTOR - RHSSPDP SCR/SR RHS / LHS

(ND 250 MX, ND355LX, ND400LX, ND450LX TB TOP option not applicable)

18 ANTICORROSIVE TREATMENT /PAINTFor TEFC/SPDP SCR/SR motors Paint shades: 631 as per IS - 5.ACP 631/632 3%Flameproof, type 'e' & type 'n' motors are provided with epoxy paint of shade 632 No as per IS -5 as a standard feature.Our standard painting procedure: Zinc chromate primer one coat + syntheticenamel paint Thickness 70 MicronsFor additional thickness upto 130 microns 5%Paint shade other than above mentioned shade and RAL shades 5% of ALP subject to max *For any other painting shade, material or procedure, please refer to division. Rs. 7000/-

19 NOISE LEVELAs per IS 12065.< = 85 dB(A) @ 1 m at no load for 4 pole motors and above No< = 90 dB(A) @ 1 m at no load for all 2 pole motors. NoFor lower noise level please refer to division.

20 VIBRATION LEVELVibration level shall be as per normal class of IS 12075-1987.For any other valuePlease refer to division.Precesion class A 10%Precesion class B 20%

21 JACKING OUT HOLES ON MOTOR FEETJacking out holes & dowel pins on motor feet are provided for frame 225 & above. No extra

22 STAINLESS STEEL HARDWARE - Upto Frame 225 Rs. 900-250 Frame and Above Rs. 1500/-

ND 200L REFER TO DIVISION FOR TECHNICAL & COMMERCIAL OFFER

SPECIAL FEATURES

23 TOTALLY ENCLOSED MOTOR WITHOUT FAN: ALP as per selected Deration factor = 0.5 frame.

24 AIR STREAM RATED MOTOR: Totally enclosed motor cooled because of fan ALP as per TEFC frame.Directly mounted on motor shaft. Output as per TEFC motors

25 Canopy

Frames 80 to 132 Rs. 1100/-Frames160 to 200 Rs. 1400/-Frames 225 to 250 Rs. 2500/-Frames 280 to 315 Rs. 4500/-Frames 355 to 400 Rs. 6000/-

FRP Canopy 5% sub to max of Rs. 7000/-

26 ENCLOSUREIncreased Safety type 'e' motors as per IS 6381 with anticorrosive paint 15%Non sparking type 'N' motors as per IS 8789 with anti corrosive paint. 7.5%( From 90 to 355 CI frames only )

( Price basis- For selected frame size, highest Kw ALP to be taken as base )Basic ALP of flameproof

Pressurised Enclosure as per IS 7389: motors

Frame P90 TO P132M + Rs. 3000/-Frame P160 to P200 + Rs. 4500/-Frames P225 to P315 + Rs. 6000/-Approval from certifying authority for pressurisedness shall be in customers' scope. Arrangement to pressurised enclosure with inert gas to be done by customer.

(For motors with terminal box on RHS / LHS ONLY)

(For motors with terminal box on RHS / LHS ONLY)

27 HAZARDOUS AREA MOTORS THAT CAN BE OFFERED :

FOR TYPE 'E' & TYPE 'N' MOTORS

ZONE GAS GROUP TEMPERATURE CLASS FRAME

2 NA T1,T2,T3 ND 90 TO ND 355L

FOR FLAMEPROOF MOTORS-INDIAN APPROVALS


1 IIA, IIB T1,T2,T3,T4 E80I,IIA, IIB E90-E132

1 I,IIA,IIB T1,T2,T3,T4 E160L TO E315L1 IIC T1,T2,T3,T4 NETT PRICE FOR IIC MOTOR = 1.40* ALP OF STD FLP

Motor- No Discount ApplicableFrames Covered E80 To E315M#

FOR FLAMEPROOF MOTORS- WITH BASEEFA/ATEX/IECEX APPROVALS

1 IIA IIB T1,T2,T3 35 % EXTRA OVER STANDARD FLAMEPROOF MOTORSFRAMES COVERED ARE E 80 TO E315 L

Terminal box will be on TOP only # - E315M ONLY UPTO TEMP CLASS T3 ONLY

( For gas group IIC Motors, DPA software not to be used for documentation)

(For these motors DPA software not to be used for documentation)


1)All % (per-centage)figures are to be loaded on list price.2)All Rs figures are to be added on nett price,3) Inspection charges are subject to excise & taxes


6


FOR PRESSURISED ENCLOSURE MOTORS


1 IIC T1,T2,T3 P90 TO P132M

1 IIC T1,T2,T3,T4 P160L TO P315L

Please refer to comment for pressurised enclosure motors as per above.

SN DESCRIPTION OF EXTRA FEATURE CASH EXTRAS

28 INSULATION CLASS

Class 'H' insulation For frame 63-132 10%

For frame 160-400 10%

29 MULTI SPEED MOTORS

single tapped winding type with 2/4, 4/8,4/6,6/8 pole motors 10% additional price for higher polarity

Dual speed motors with separate winding or polarity above 8 pole 17.5 % of higher price for higher polarity

Dual speed motor with more than 2 speeds 25% on ALP of highest polarity

30. Motors with 10,12,16 pole Please refer to division 10% of Highest ALP for 8 pole motor in the

Selected frame

31 CRANE DUTY MOTORS :. As Per Price List LTM/005

For Rating/Frames not covered in price lists please

load 10% extra over identified Frame/Rating ALP

32 EPOXY GEL COAT 2 %

33. CLEAN FLOW CONSTRUCTION for TEFC SCR textile motors

Frames 90S to 132M

Frames 160 to 200 As Per Price List

ACCESSORIES

1. SPACE HEATERS -

Space heaters are terminated in auxiary terminal box on top of main terminal box (Except for all FLP motors & TEFC motors in 160-180 for which heater terminals are terminated in main terminal box.)(Space heaters are provided as a standard feature for standard DDI TEFC SCR motors in

frame 280 and above.)For frames 160 to 180 Rs. 1250/-For frames 200 to 250 Rs. 2500/-For frames 280 to 400 ( TEFC) NilFor frames 280 to 355 ( FLP)- Space heater termination in the main terminal box Rs. 3600/-

For Flameproof motors with separate terminal box for space heaters orThermisters (available only for one option either thermister or space heater)Frames 225 to 355 Rs. 2100/- above the charges

for space heaters

No Space heaters will be provided for frames below 132Space heater for ND132 frame ( TEFC ) Rs. 900/-

2. THERMISTORS ( Without relays ) 80 frames abovevarieties: PTC -110, PTC-130, PTC- 150-3 nos per motor without relay 80 355 Rs. 1800/--6nos ( PTC 130 - 3 nos & PTC 150 -3 nos ) per motor without relay 160 - 355 Rs. 3300/-



AC MOTORS


7

SPECIAL FEATURES


Note : Should customer require any additional feature not covered here, kindly refer the same to Division


3 RTD's 250 frames and above

6 Nos ( 2 Nos per phase) Rs. 6000/-

4 BEARING TEMPERATURE DETECTOR ( 2 Nos. )

Frames 280 & above Rs. 6000/-

5 Cable sealing box for group I for frame 160-200 flameproof motors. Rs. 1600/-

For 225-315 frame flameproof motors 1 No. S.Box is provided as standard. For second Rs. 1800

sealing box :

For frame 90-132 ( not available in frame 80.) Rs.1400/-

6 FLP Plug and socket arrangement: ( SAFEX Make)

-30 Amps,600 volts Rs. 18000

-110 Amps,600 volts Rs. 21000

-150 Amps,600 volts Rs. 26000

7 DOUBLE COMPRESSION GLANDS (Per Run of Cable)

Upto frame 160 Rs. 1200/-

180 to 225 Rs. 2200/-

250 to 400 Rs. 2900/-

Space heater gland and thermisters glands Rs. 900/-

# Compression glands suitable for gas group IIA IIB only

# Supply of glands for Gas group IIC not in CGL scope of supply

8. FINISHING AND PACKING

Motor delivered in upacked condition No reduction

Motor delivered with only red oxide primer coat No reduction

Seaworthy/export packing case for home market (Without fumigation certificate) 3% subject to max of 4600/-

9 Additional nameplate Rs. 300/-

10 Direction arrow plate Rs 600/-

TESTING CHARGES

INSPECTION/TEST WITNESSING BY CUSTOMER/ CONSULTANTInspection arrangements and third party inspection charges are in customers scope. In addition following would be inspection charges for witnessing tests:

1 Routine testing per motor:

Frames 63-160 Rs. 1400/-

Frames 180 to 250 Rs. 1900/-

Frames 280 to 400 Rs. 2600/-

2 Type testing per motor

Frame 63-160 Rs. 3300/-

Frames 180 to 250 Rs. 6000/-

Frames 280 to 315 Rs. 9000/-

Frame 355 & 400 Rs. 14000/-

For 355 & 400 frame part load testing shall be done depending on test plant capacity.

3 FLP Pressure test per motor

Frame 80-160 Rs. 3000

Frames 180 to 315 Rs. 8000/-

4 IInd numeral IP55 test per motor (Prior confirmation from Division required) Rs 5000/-

5 Testing with inverter drive Rs. 55000/- per motor( ERTL presence/witness charges extra to Customers account ) (ERTL presence / witness charges

** As per norms entire batch requires joint testing hence charges required for total no of motors and not extra to Customers account ERTLon sample basis, please quote extended delivery also accordingly- Please refer to Division in case of any query. personnel logistics to customers account

6 DOCUMENTATION CHARGES(technical/commercial)

documents for approval/submission Rs. 1500/- per rating

Reproducible tracing copies for final submission. Rs. 6000/- per rating

Marine motor documentation : please refer such enquiries to division. Rs. 14,000/- per rating

ROD Type without wiring

AC MOTORS


8

SPECIAL FEATURES

( Price List No LTM/005 Dt. 05.01.11)


EFF 2

IS 12615

TOTALLY ENCLOSED FAN COOLED SQUIRREL CAGE INDUCTION MOTORS-FOOT MOUNTED Enclosure confirming to protection IP 55 Horizontal Foot Mounted (B3),continuously rated (S1) suitable for operation on 415+/- 10% V,3 Phase

50Hz+/- 5% AC supply with ambient 50ºC,Class "F" insulation with temperature rise limited to Class "B" and altitude less than 1000 m Above m.s.l. confirming to IS 325.

AC MOTORS EFF. LEVEL 2 FOOT MOUNTED

OUTPUT 2POLE : 3000RPM OUTPUT 4POLE : 1500RPM

KW HP FRAME PRICE EX.DUTY KW HP FRAME PRICE EX.DUTY

0.18 0.25 GD63 7260 337 0.18 0.25 GD63 7960 3690.25 0.33 GD63 7470 346 0.25 0.33 GD71 8110 3760.37 0.50 GD71 7940 368 0.37 0.50 GD71 8390 3890.55 0.75 GD/ND80 8750 406 0.55 0.75 GD/ND80 9340 4330.75 1.00 GD/ND80 9090 421 0.75 1.00 GD/ND80 9420 437*1.10 1.50 GD/ND80 9910 459 1.10 1.50 GD/ND90S 10250 4751.50 2.00 GD/ND90S 10880 504 1.50 2.00 GD/ND90L 11170 5182.20 3.00 GD/ND90L 13980 648 2.20 3.00 GD/ND100L 14800 6863.00 4.00 GD/ND100L 17180 796 3.00 4.00 GD/ND100L 16370 7593.70 5.00 GD/ND100L 17180 796 3.70 5.00 GD/ND112M 18980 880*5.50 7.50 ND112M 26320 1220 5.50 7.50 GD/ND132S 26160 12135.50 7.50 ND/GD132S 28230 1308 7.50 10.00 GD/ND132M 30480 14137.50 10.00 GD/ND132S 29180 1352 *9.30 12.50 ND132M 44080 2043#9.30 12.50 GD/ND132M 47650 2209 9.30 12.50 ND160M 48520 22499.30 12.50 ND160M 50970 2362 11.00 15.00 ND160M 48850 226411.00 15.00 ND160M 50970 2362 #15.00 20.00 ND160L 60720 281415.00 20.00 ND160M 59760 2770 18.50 25.00 ND180M 85820 397818.50 25.00 ND160L 81170 3762 22.00 30.00 ND180L 91420 423722.00 30.00 ND180M 90510 4195 30.00 40.00 ND200L 123420 572130.00 40.00 ND200L 128670 5964 37.00 50.00 ND225S 158600 735137.00 50.00 ND200L 164240 7613 45.00 60.00 ND225M 192240 891045.00 60.00 ND225M 211370 9797 55.00 75.00 ND250M 264210 1224655.00 75.00 ND250M 284570 13190 60.00 80.00 ND250MX 285340 1322660.00 80.00 ND250MX 307330 14245 75.00 100.00 ND280S 338470 1568875.00 100.00 ND280S 370550 17175 90.00 120.00 ND280M 392120 1817590.00 120.00 ND280M 429520 19908 110.00 150.00 ND315S 494200 22906110.00 150.00 ND315S 564110 26146 125.00 170.00 ND315M 565680 26219125.00 170.00 ND315M 661910 30680 132.00 180.00 ND315M 581860 26969132.00 180.00 ND315M 693320 32135 160.00 215.00 ND315LX 649360 30098150.00 200.00 ND315L 733250 33986 180.00 240.00 ND315L 726110 33655160.00 215.00 ND315LX 759470 35201 200.00 270.00 ND315LX 828730 38412180.00 240.00 ND315L 799540 37059 $225.00 300.00 ND355L 848060 39308200.00 270.00 ND315LX 886710 41099 250.00 300.00 ND355LX 873090 40468225.00 300.00 ND355L 937600 43458 260.00 350.00 ND355LX 888310 41173250.00 335.00 ND355LX 988480 45816 275.00 370.00 ND355LX 924910 42870275.00 370.00 ND355LX 1051490 48737 315.00 425.00 ND355LX 1045630 48465315.00 425.00 ND355LX 1076780 49909 335.00 452.00 ND355LX 1131350 52438335.00 452.00 ND355LX 1228770 56953 350.00 470.00 ND355LX 1347970 62478350.00 470.00 ND400LX 1747600 81001 360.00 485.00 ND355LX 1441620 66819375.00 503.00 ND400LX 1872440 86788 #375.00 503.00 ND355LX 1647320 76353400.00 536.00 ND400LX 1966690 91156 375.00 503.00 ND400LX 1741340 80711425.00 570.00 ND400LX 2122530 98379 400.00 536.00 ND400LX 1857270 86084

425.00 570.00 ND400LX 1973950 91493450.00 603.00 ND400LX 2194560 101718460.00 620.00 ND400LX 2348160 108837470.00 630.00 ND400LX 2465570 114279

Note : * This rating is suitable for class F temp rise only All GD frames are with Terminal Box on Top# This rating is suitable for 45ºC Amb. / 75 ºC Temp. rise$ This rating is suitable for 40ºC Amb. / 80 ºC Temp. Rise

9

OUTPUT 6POLE :1000RPM OUTPUT 8POLE : 750RPM


0.37 0.50 GD/ND80 9920 460 0.37 0.50 GD/ND90S 10960 508

0.55 0.75 GD/ND80 10140 470 0.55 0.75 GD/ND90L 12010 557

0.75 1.00 GD/ND90S 10900 505 0.75 1.00 GD/ND100L 14770 685

1.10 1.50 GD/ND90L 11960 554 1.10 1.50 GD/ND100L 18000 834

1.50 2.00 GD/ND100L 15980 741 1.50 2.00 GD/ND112M 20850 966

2.20 3.00 GD/ND112M 19110 886 2.20 3.00 GD/ND132S 27630 1281

3.00 4.00 GD/ND132S 27920 1294 3.00 4.00 GD/ND132M 43290 2006

3.70 5.00 GD/ND132S 27920 1294 3.70 5.00 GD/ND132M 43290 2006

5.50 7.50 GD/ND132M 31130 1443 5.50 7.50 ND160M 50380 2335

7.50 10.00 ND160M 50350 2334 7.50 10.00 ND160L 63910 2962

9.30 12.50 ND160L 59570 2761 9.30 12.50 ND180M 86960 4031

11.00 15.00 ND160L 62710 2907 11.00 15.00 ND180L 91700 4250

15.00 20.00 ND180L 89630 4154 15.00 20.00 ND200L 129150 5986

18.50 25.00 ND200L 116570 5403 18.50 25.00 ND225S 167320 7755

22.00 30.00 ND200L 126530 5865 22.00 30.00 ND225M 202110 9368

30.00 40.00 ND225M 197920 9174 30.00 40.00 ND250M 271620 12590

37.00 50.00 ND250M 266190 12338 37.00 50.00 ND280S 347140 16090

45.00 60.00 ND280S 339750 15747 45.00 60.00 ND280M 403030 18680

55.00 75.00 ND280M 385460 17866 55.00 75.00 ND315S 486050 22528

75.00 100.00 ND315S 473810 21961 75.00 100.00 ND315M 606410 28107

90.00 120.00 ND315M 595720 27612 90.00 120.00 ND315L 684210 31713

110.00 150.00 ND315M 664290 30790 110.00 150.00 ND315LX 724320 33572

125.00 170.00 ND315L 724060 33560 125.00 170.00 ND315LX 799610 37062

132.00 180.00 ND315L 775470 35943 132.00 180.00 ND315LX 843230 39084

150.00 200.00 ND315LX 797140 36947 150.00 200.00 ND355L 885320 41035

160.00 215.00 ND315LX 803610 37247 160.00 215.00 ND355LX 975030 45193

180.00 240.00 ND355L 886310 41080 180.00 240.00 ND355LX 995620 46147

200.00 270.00 ND355LX 920410 42661 200.00 270.00 ND355LX 1019400 47249

225.00 300.00 ND355LX 956190 44319 #225.00 300.00 ND355LX 1522660 70575

250.00 335.00 ND355LX 991990 45979 250.00 335.00 ND400LX 2346950 108781

275.00 370.00 ND355LX 1142760 52967 275.00 370.00 ND400LX 2581650 119659

#315.00 415.00 ND355LX 1579260 73199 #315.00 425.00 ND400LX 2870270 133037

315.00 415.00 ND400LX 1832040 84915

325.00 435.00 ND400LX 1882140 87237

415.00 560.00 ND400LX 2115800 98067

#430.00 575.00 ND400LX 2115800 98067

Note : All GD frames are with Terminal Box on Top # This rating is suitable for 45ºC Amb. / 75 ºC Temp. Rise

TOTALLY ENCLOSED FAN COOLED SQUIRREL CAGE INDUCTION MOTORS-FOOT MOUNTED Enclosure confirming to protection IP 55 Horizontal Foot Mounted (B3),continuously rated (S1) suitable for operation on 415+/- 10% V,3 Phase

50Hz+/- 5% AC supply with ambient Class "F" insulation with temperature rise limited to Class "B" and altitude less than 1000 m Above m.s.l. confirming to IS 325.

50ºC,

EFF 2

IS 12615


10



TOTALLY ENCLOSED FAN COOLED SQUIRREL CAGE INDUCTION MOTORS-FLANGE & FOOT CUM FLANGEEnclosure confirming to protection IP 55 Flange Mounted (For 180 & above-B5 or V1) and foot cum flange from 63 to 400 frame, continuously rated (S1) suitable for operation on 415+/- 10% V,3 Phase 50Hz+/- 5% AC supply with ambient Class "F" insulation with temperature rise limited to

Class "B" and altitude less than 1000 m above m.s.l. Confirming to IS 325.50ºC,

EFF 2

IS 12615


11

AC MOTORS EFF. LEVEL 2 FLANGE & FOOT CUM MOUNTED


OUTPUT 2POLE :3000RPM OUTPUT 4POLE:1500RPM


0.18 0.25 GD63 7480 347 0.18 0.25 GD63 8190 3800.25 0.33 GD63 7690 356 0.25 0.33 GD71 8360 3870.37 0.50 GD71 8180 379 0.37 0.50 GD71 8640 4000.55 0.75 GD/ND80 9010 418 0.55 0.75 GD/ND80 9620 4460.75 1.00 GD/ND80 9360 434 0.75 1.00 GD/ND80 9700 450*1.10 1.50 GD/ND80 10210 473 1.10 1.50 GD/ND90S 10550 4891.50 2.00 GD/ND90S 11210 520 1.50 2.00 GD/ND90L 11500 5332.20 3.00 GD/ND90L 14400 667 2.20 3.00 GD/ND100L 15250 7073.00 4.00 GD/ND100L 17700 820 3.00 4.00 GD/ND100L 16370 7593.70 5.00 GD/ND100L 17700 820 3.70 5.00 GD/ND112M 19550 906*5.50 7.50 ND112M 27100 1256 5.50 7.50 GD/ND132S 26940 12495.50 7.50 GD/ND132S 29080 1348 7.50 10.00 GD/ND132M 31410 14567.50 10.00 GD/ND132S 30070 1394 *9.30 12.50 ND132M 45400 2104#9.30 12.50 GD/ND132M 49080 2275 9.30 12.50 ND160M 49970 23169.30 12.5 ND160M 52510 2434 11.00 15.00 ND160M 50310 233211.00 15.00 ND160M 52510 2434 #15.00 20.00 ND160L 62550 289915.00 20.00 ND160M 61570 2854 18.50 25.00 ND180M 90110 417718.50 25.00 ND160L 83600 3875 22.00 30.00 ND180L 95980 444922.00 30.00 ND180M 95030 4405 30.00 40.00 ND200L 129600 600730.00 40.00 ND200L 135100 6262 37.00 50.00 ND225S 166520 771837.00 50.00 ND200L 172460 7994 45.00 60.00 ND225M 201850 935645.00 60.00 ND225M 221930 10286 55.00 75.00 ND250M 277420 1285855.00 75.00 ND250M 298790 13849 60.00 80.00 ND250MX 299620 1388760.00 80.00 ND250MX 322710 14958 75.00 100.00 ND280S 355390 1647275.00 100.00 ND280S 389080 18034 90.00 120.00 ND280M 411720 1908390.00 120.00 ND280M 450990 20903 110.00 150.00 ND315S 518930 24052110.00 150.00 ND315S 592320 27454 125.00 170.00 ND315M 593970 27531125.00 170.00 ND315M 695020 32214 132.00 180.00 ND315M 610940 28317132.00 180.00 ND315M 728000 33743 160.00 215.00 ND315LX 681820 31602150.00 200.00 ND315L 769920 35686 180.00 240.00 ND315L 762420 35338160.00 215.00 ND315LX 797430 36961 200.00 270.00 ND315LX 870180 40333180.00 240.00 ND315L 839510 38911 $225.00 300.00 ND355L 890450 41272200.00 270.00 ND315LX 931050 43154 250.00 300.00 ND355LX 916740 42491225.00 300.00 ND355L 984480 45631 260.00 350.00 ND355LX 932730 43232250.00 335.00 ND355LX 1037910 48107 275.00 370.00 ND355LX 971170 45014275.00 370.00 ND355LX 1104070 51174 315.00 425.00 ND355LX 1097910 50888315.00 425.00 ND355LX 1130620 52404 335.00 452.00 ND355LX 1187920 55060335.00 452.00 ND355LX 1290200 59801 350.00 470.00 ND355LX 1415370 65602350.00 470.00 ND400LX 1834990 85052 360.00 485.00 ND355LX 1513700 70160375.00 503.00 ND400LX 1966050 91126 #375.00 503.00 ND355LX 1729680 80171400.00 536.00 ND400LX 2065020 95714 375.00 503.00 ND400LX 1828410 84747425.00 570.00 ND400LX 2228640 103297 400.00 536.00 ND400LX 1950150 90389

425.00 570.00 ND400LX 2072630 96066450.00 603.00 ND400LX 2304280 106803460.00 620.00 ND400LX 2465570 114279470.00 630.00 ND400LX 2588840 119993

Note : * This rating is suitable for class F temp rise only # This rating is suitable for 45ºC Amb. / 75 ºC Temp. rise GD frame motors, Terminal box will be on top for B35 Motors

Note : # This rating is suitable for 45ºC Amb. / 75 ºC Temp. Rise GD frame motors, Terminal box will be on top for B35 Motors

OUTPUT 6POLE:1000RPM OUTPUT 8POLE:750RPM

KW HP FRAME PRICE EX.DUTY KW HP FRAME PRICE EX.DUTY0.37 0.50 GD/ND80 10220 474 0.37 0.50 GD/ND90S 11290 523

0.55 0.75 GD/ND80 10450 484 0.55 0.75 GD/ND90L 12370 573

0.75 1.00 GD/ND90S 11230 521 0.75 1.00 GD/ND100L 15210 705

1.10 1.50 GD/ND90L 12320 571 1.10 1.50 GD/ND100L 18540 859

1.50 2.00 GD/ND100L 16470 763 1.50 2.00 GD/ND112M 21460 995

2.20 3.00 GD/ND112M 19680 912 2.20 3.00 GD/ND132S 28460 1319

3.00 4.00 GD/ND132S 28750 1333 3.00 4.00 GD/ND132M 44590 2067

3.70 5.00 GD/ND132S 28750 1333 3.70 5.00 GD/ND132M 44590 2067

5.50 7.50 GD/ND132M 32070 1486 5.50 7.50 ND160M 51900 2406

7.50 10.00 ND160M 51870 2404 7.50 10.00 ND160L 65840 3052

9.30 12.50 ND160L 61350 2844 9.30 12.50 ND180M 91310 4232

11.00 15.00 ND160L 64590 2994 11.00 15.00 ND180L 96270 4462

15.00 20.00 ND180L 94120 4362 15.00 20.00 ND200L 135620 6286

18.50 25.00 ND200L 122410 5674 18.50 25.00 ND225S 175690 8143

22.00 30.00 ND200L 132850 6158 22.00 30.00 ND225M 212210 9836

30.00 40.00 ND225M 207820 9632 30.00 40.00 ND250M 285200 13219

37.00 50.00 ND250M 279500 12955 37.00 50.00 ND280S 364500 16895

45.00 60.00 ND280S 356720 16534 45.00 60.00 ND280M 423170 19614

55.00 75.00 ND280M 404730 18759 55.00 75.00 ND315S 510350 23655

75.00 100.00 ND315S 497510 23060 75.00 100.00 ND315M 636720 29512

90.00 120.00 ND315M 625520 28993 90.00 120.00 ND315L 718410 33298

110.00 150.00 ND315M 697490 32329 110.00 150.00 ND315LX 760530 35251

125.00 170.00 ND315L 760270 35239 125.00 170.00 ND315LX 839600 38915

132.00 180.00 ND315L 814240 37740 132.00 180.00 ND315LX 885390 41038

150.00 200.00 ND315LX 837000 38795 150.00 200.00 ND355L 929590 43086

160.00 215.00 ND315LX 843800 39110 160.00 215.00 ND355LX 1023780 47452

180.00 240.00 ND355L 930630 43135 180.00 240.00 ND355LX 1045410 48455

200.00 270.00 ND355LX 966440 44794 #225.00 300.00 ND355LX 1598800 74104

225.00 300.00 ND355LX 1004000 46535 250.00 335.0 ND400LX 2464310 114221

250.00 335.00 ND355LX 1041600 48278 275.00 370.0 ND400LX 2710730 125642

275.00 370.00 ND355LX 1199900 55615 #315.00 425.0 ND400LX 3013780 139689

#315.00 415.00 ND355LX 1658230 76859

315.00 415.00 ND400LX 1923650 89161

325.00 435.00 ND400LX 1976250 91599

415.00 560.00 ND400LX 2221580 102970

#430.00 575.00 ND400LX 2221580 102970

EFF 2

IS 12615


12

AC MOTORS EFF. LEVEL 2 FLANGE & FOOT CUM MOUNTED

TOTALLY ENCLOSED FAN COOLED SQUIRREL CAGE INDUCTION MOTORS-FLANGE & FOOT CUM FLANGEEnclosure confirming to protection IP 55 Flange Mounted (For 180 & above-B5 or V1) and foot cum flange from 63 to 400 frame, continuously rated (S1) suitable for operation on 415+/- 10% V,3 Phase 50Hz+/- 5% AC supply with ambient Class "F" insulation with temperature rise limited to

Class "B" and altitude less than 1000 m above m.s.l. Confirming to IS 325.50ºC,


TOTALLY ENCLOSED FAN COOLED SQUIRREL CAGE INDUCTION MOTORS-FOOT MOUNTEDEnclosure confirming to protection IP 55 Horizontal Foot Mounted (B3),continuously rated (S1) suitable for operation on 415+/- 10% V,3 Phase


50ºC,

EFF 1

IS 12615

Note : * All GD frames are with Terminal Box on TopEff1 will be punched on the motor nameplates upto 160Kw


13





0.25 0.33 GD71 8420 390

0.37 0.50 GD71 9140 424 0.37 0.50 GD71 9680 449

0.55 0.75 NG80 10120 469 0.55 0.75 NG80 10740 498

0.75 1.00 NG80 10460 485 0.75 1.00 NG80 10850 503

1.10 1.50 NG80 11420 529 1.10 1.50 NG90S 11780 546

1.50 2.00 NG90S 12500 579 1.50 2.00 NG90L 12830 595

2.20 3.00 NG90L 16070 745 2.20 3.00 NG100L 17020 789

3.70 5.00 NG100L 19770 916 3.70 5.00 NG112M 21800 1010

5.50 7.50 NG132S 32430 1503 5.50 7.50 NG132S 30070 1394

7.50 10.00 NG132S 33560 1556 7.50 10.00 NG132M 35050 1625

9.30 12.50 ND160M 57500 2665 9.30 12.50 ND160M 54970 2548

11.00 15.00 ND160M 58610 2717 11.00 15.00 ND160M 56170 2603

15.00 20.00 ND160M 68720 3185 15.00 20.00 ND160L 69830 3237

18.50 25.00 ND160L 93340 4326 18.50 25.00 ND180M 94400 4375

22.00 30.00 ND180M 99560 4615 22.00 30.00 ND180L 100560 4661

30.00 40.00 ND200L 141540 6560 30.00 40.00 ND200L 135760 6292

37.00 50.00 ND200L 180660 8374 37.00 50.00 ND225S 174450 8086

45.00 60.00 ND225M 232510 10777 45.00 60.00 ND225M 211460 9801

55.00 75.00 ND250MX 313030 14509 55.00 75.00 ND250MX 290630 13471

75.00 100.00 ND280S 389080 18034 75.00 100.00 ND280S 355400 16473

90.00 120.00 ND280M 450980 20903 90.00 120.00 ND280M 412030 19098

110.00 150.00 ND315S 569670 26404 110.00 150.00 ND315S 499150 23136

125.00 170.00 ND315M 668540 30987 125.00 170.00 ND315M 571340 26482

132.00 180.00 ND315M 700110 32450 132.00 180.00 ND315M 587680 27239

160.00 215.00 ND315LX 766660 35535 160.00 215.00 ND315LX 656130 30412

180.00 240.00 ND315LX 807110 37410 180.00 240.00 ND315LX 733380 33992

200.00 270.00 ND315LX 895240 41494 200.00 270.00 ND315LX 837070 38798

225.00 300.00 ND355L 946970 43892 225.00 300.00 ND355L 856540 39701

250.00 335.00 ND355LX 997900 46253 250.00 335.00 ND355LX 881790 40871

275.00 370.00 ND355LX 1062010 49224 260.00 350.00 ND355LX 897190 41585

315.00 425.00 ND355LX 1087550 50408 275.00 370.00 ND355LX 934160 43298

335.00 452.00 ND355LX 1241050 57523 315.00 425.00 ND355LX 1056090 48950

335.00 452.00 ND355LX 1142000 52932

350.00 470.00 ND355LX 1361450 63103

EFF 1

IS 12615

Note : * All GD frames are with Terminal Box on TopEff1 will be punched on the motor nameplates upto 160Kw


14


TOTALLY ENCLOSED FAN COOLED SQUIRREL CAGE INDUCTION MOTORS-FOOT MOUNTEDEnclosure confirming to protection IP 55 Horizontal Foot Mounted (B3),continuously rated (S1) suitable for operation on 415+/- 10% V,3 Phase


50ºC,




0.37 0.50 NG80 11410 529 3.70 5.00 ND160M 57540 2667

0.55 0.75 NG80 11700 542 5.50 7.50 ND160M 57940 2686

0.75 1.00 NG90S 12540 581 7.50 10.00 ND160L 73490 3406

1.10 1.50 NG90L 13750 637 9.30 12.50 ND180M 95660 4434

1.50 2.00 NG100L 18380 852 11.00 15.00 ND180L 100870 4675

2.20 3.00 NG112M 21970 1018 15.00 20.00 ND200L 142070 6585

3.70 5.00 NG132S 32100 1488 18.50 25.00 ND225S 184050 8531

5.50 7.50 NG132M 35810 1660 22.00 30.00 ND225M 222150 10297

7.50 10.00 ND160M 57900 2684 30.00 40.00 ND250MX 298780 13848

9.30 12.50 ND160L 68500 3175 37.00 50.00 ND280S 364500 16895

11.00 15.00 ND160L 72130 3343 45.00 60.00 ND280M 423170 19614

15.00 20.00 ND180L 98590 4570 55.00 75.00 ND315S 490900 22753

18.50 25.00 ND200L 128230 5943 75.00 100.00 ND315M 612480 28388

22.00 30.00 ND200L 139180 6451 90.00 120.00 ND315L 691040 32030

30.00 40.00 ND225M 217710 10091 110.00 150.00 ND315L 731560 33908

37.00 50.00 ND250M 292810 13572 125.00 170.00 ND315L 807620 37433

45.00 60.00 ND280S 350720 16256 132.00 180.00 ND315LX 851680 39475

55.00 75.00 ND280M 397440 18421 160.00 215.00 ND355LX 984780 45645

75.00 100.00 ND315S 478540 22180 180.00 240.00 ND355LX 1005580 46609

90.00 120.00 ND315M 601690 27888 200.00 270.00 ND355LX 1029600 47722

110.00 150.00 ND315M 670930 31098

125.00 170.00 ND315L 731300 33896

132.00 180.00 ND315L 783230 36303

160.00 215.00 ND315LX 811650 37620

170.00 230.00 ND355L 844870 39160

180.00 240.00 ND355L 895180 41492

200.00 270.00 ND355LX 929610 43087

225.00 300.00 ND355LX 965750 44763

250.00 370.00 ND355LX 1001910 46439

275.00 370.00 ND355LX 1154190 53497

* Rotor with class F temperature rise

Note : Position of Terminal Box on Top


15

AC MOTORS SLIP RING

TOTALLY ENCLOSED FAN COOLED SLIPRING INDUCTION MOTORSEnclosure confirming to protection IP 55 Horizontal Foot Mounted (B3),continuously rated (S1) suitable for operation on 415+/- 10% V,3 Phase

50Hz+/- 5% AC supply with ambient 4 Class "F" insulation with temperature rise limited to Class "B" and altitude less than 1000 m Above m.s.l. confirming to IS 325

5ºC,


OUTPUT 4 POLE : 1500 RPM OUTPUT 6 POLE : 1000 RPM


3.00 4.00 DW132S 72680 3369 2.20 3.00 DW132S 75060 3479

3.70 5.00 DW132S 74340 3446 3.00 4.00 DW132S 78960 3660

5.50 7.50 DW132S 75890 3518 3.70 5.00 DW132M 82960 3845

5.50 7.50 DW132M 92210 4274 5.50 7.50 NDW160M 101180 4690

7.50 10.00 NDW160M 100500 4658 7.50 10.00 NDW160L 126250 5852

11.00 15.00 NDW160L 125760 5829 11.00 15.00 NDW180L 163920 7598

15.00 20.00 NDW180L 166490 7717 15.00 20.00 NDW200L 214010 9919

18.50 25.00 NDW200L 191540 8878 18.50 25.00 NDW225M 275950 12790

22.00 30.00 NDW200L 212810 9864 22.00 30.00 NDW225M 329760 15284

30.00 40.00 NDW225M 262880 12184 30.00 40.00 NDW250M 436130 20215

37.00 50.00 NDW250M 360480 16708 37.00 50.00 NDW280S 493790 22887

45.00 60.00 NDW250M 430890 19972 45.00 60.00 NDW280M 536530 24868

55.00 75.00 NDW280S 474880 22011 55.00 75.00 NDW315S 598320 27732

75.00 100.00 NDW280M 527300 24440 75.00 100.00 NDW315M 755740 35029

90.00 120.00 NDW315S 657360 30469 90.00 120.00 NDW315LX 837990 38841

110.00 150.00 NDW315M 759590 35207 110.00 150.00 NDW315LX 994630 46101

125.00 170.00 NDW315LX 835520 38726 125.00 170.00 NDW315LX 1080080 50062

132.00 180.00 NDW315LX 880700 40820 132.00 180.00 NDW315LX 1140560 52865

150.00 200.00 NDW315LX 999250 46315 150.00 200.00 NDW355LX 1157930 53670

160.00 215.00 NDW315LX 1020770 47313 160.00 215.00 NDW355LX 1235110 57247

180.00 240.00 NDW355L 1079950 50056 180.00 240.00 NDW355LX 1312280 60824

200.00 270.00 NDW355L 1199950 55618 *200.00 270.00 NDW355LX 1421640 65893

225.00 300.00 NDW355LX 1264450 58607 225.00 300.00 NDW400LX 1529660 70900

250.00 335.00 NDW355LX 1280160 59335 250.00 335.00 NDW400LX 1699630 78778

275.00 370.00 NDW355LX 1357620 62926 275.00 370.00 NDW400LX 1869580 86655

300.00 402.00 NDW400LX 1935040 89689 300.00 402.00 NDW400LX 2039520 94532

315.00 436.00 NDW400LX 2031800 94174 *315.00 436.00 NDW400LX 2209480 102409

350.00 470.00 NDW400LX 2257560 104638

OUTPUT 8 POLE : 750 RPM

KW HP FRAME PRICE EX.DUTY

3.00 4.00 NDW160M 108210 5016

3.70 5.00 NDW160M 112070 5194

5.50 7.50 NDW160L 125620 5822

7.50 10.00 NDW180L 170850 7919

11.00 15.00 NDW200L 223830 10375

15.00 20.00 NDW225M 287820 13340

18.50 25.00 NDW225M 332870 15429

22.00 30.00 NDW250M 434470 20138

30.00 40.00 NDW280S 501270 23234

37.00 50.00 NDW280M 574950 26649

45.00 60.00 NDW315S 706720 32756

55.00 75.00 NDW315M 817940 37912

75.00 100.00 NDW315LX 900440 41735

90.00 120.00 NDW315LX 1065040 49365

110.00 150.00 NDW355LX 1134320 52576

125.00 170.00 NDW355LX 1261790 58484

132.00 180.00 NDW355LX 1296390 60088

150.00 200.00 NDW355LX 1388760 64369

160.00 215.00 NDW355LX 1407130 65220

180.00 240.00 NDW400LX 1670970 77449

200.00 270.00 NDW400LX 1856490 86048

225.00 300.00 NDW400LX 2088560 96805

Note : Position of Terminal Box on Top


16

AC MOTORS SLIP RING

TOTALLY ENCLOSED FAN COOLED SLIP RING INDUCTION MOTORSEnclosure confirming to protection IP 55 Horizontal Foot Mounted (B3),continuously rated (S1) suitable for operation on 415+/- 10% V,3 Phase

50Hz+/- 5% AC supply with ambient Class "F" insulation with temperature rise limited to Class "B" and altitude less than 1000 m Above m.s.l. confirming to IS 325

45ºC,


TOTALLY ENCLOSED FAN COOLED SQUIRREL CAGE INDUCTION MOTORS WITH EXTERNAL BRAKEEnclosure confirming to protection IP 55 Horizontal Foot Mounted (B3),continuously rated (S1) suitable for operation on 415+/- 10% V,3 Phase


45ºC,



0.18 0.25 GD63 14700 681 0.18 0.25 GD63 15660 726

0.25 0.33 GD63 14890 690 0.25 0.33 GD71 16680 773

0.37 0.50 GD71 16560 768 0.37 0.50 GD71 17030 789

0.55 0.75 GD71 18000 834 0.55 0.75 GD80 18740 869

0.75 1.00 GD80 18360 851 0.75 1.00 GD80 18820 872

1.10 1.50 GD80 19440 901 1.10 1.50 GD90S 23930 1109

1.50 2.00 GD90S 24860 1152 1.50 2.00 GD90L 25160 1166

2.20 3.00 GD90L 29050 1346 2.20 3.00 GD100L 32320 1498

3.00 4.00 GD100L 35660 1653 3.00 4.00 GD100L 34430 1596

3.70 5.00 GD100L 35660 1653 3.70 5.00 GD112M 40620 1883

5.50 7.50 GD112M 50710 2350 5.50 7.50 GD132S 55660 2580

5.50 7.50 GD132M 58690 2720 7.50 10.00 GD132M 61470 2849

7.50 10.00 GD132S 59970 2780 9.30 12.50 GD132M 79730 3695

9.30 12.50 GD132M 84930 3937



0.37 0.50 GD80 19430 901 0.37 0.50 GD90S 24130 1118

0.55 0.75 GD80 19600 908 0.55 0.75 GD90L 25380 1176

0.75 1.00 GD90S 24810 1150 0.75 1.00 GD100L 32290 1497

1.10 1.50 GD90L 26210 1215 1.10 1.50 GD100L 36610 1697

1.50 2.00 GD100L 33910 1572 1.50 2.00 GD112M 43140 2000

2.20 3.00 GD112M 40800 1891 2.20 3.00 GD132S 57650 2672

3.00 4.00 GD132S 64660 2997 3.00 4.00 GD132M 85290 3953

3.70 5.00 GD132S 64660 2997

5.50 7.50 GD132M 68980 3197

EFF 2

IS 12615


17

AC MOTORS BRAKE MOTORS - S1 DUTY


EFF 2

IS 12615



0.37 0.5 GD71 18730 868 0.37 0.5 GD71 20850 966

0.55 0.75 GD71 18980 880 0.55 0.75 GD80 21370 990

0.75 1.00 GD80 20630 956 0.75 1.00 GD80 21860 1013

1.10 1.50 GD80 21180 982 1.10 1.50 GD90S 27280 1264

1.50 2.00 GD90S 26320 1220 1.50 2.00 GD90L 28830 1336

2.20 3.00 GD90L 27680 1283 2.20 3.00 GD100L 37300 1729

3.75 5.06 GD100L 35550 1648 3.70 5.00 GD112M 44880 2080

5.50 7.50 GD112M 44680 2071 5.50 7.50 GD132S 71130 3297

7.50 10.00 GD132S 61230 2838 7.50 10.00 GD132M 75880 3517

9.30 12.50 GD132M 67620 3134

OUTPUT 8POLE :750RPM


0.55 0.75 GD90S 26540 1230

0.75 1.00 GD90L 27920 1294

1.10 1.50 GD100L 35520 1646

1.50 2.00 GD100L 40400 1873

2.20 3.00 GD112M 47450 2199

3.70 5.00 GD132S 63420 2940


18

AC MOTORS BRAKE MOTORS - S4 DUTY

TOTALLY ENCLOSED FAN COOLED SQUIRREL CAGE INDUCTION MOTORS WITH EXTERNAL BRAKEEnclosure confirming to protection IP 55 Horizontal Foot Mounted (B3),continuously rated (S4) 40% CDF 150 Starts/hour suitable for operation on415+/- 10% V,3 Phase 50Hz+/- 5% AC supply with ambient Class "F" insulation with temperature rise limited to Class "B" and altitude less

than 1000 m above m.s.l. confirming to IS 32545ºC,


Note : Position of Terminal box on RHS when viewed from DE

SCREEN PROTECTED DRIP PROOF SLIPRING INDUCTION MOTORSEnclosure confirming to protection IP 21/23 Horizontal Foot Mounted (B3),continuously rated (S1) suitable for operation on 415+/- 10% V,3 Phase


45ºC,


19

AC MOTORS SPDP SLIP RING




7.50 10.00 CW160M 87360 4049 5.50 7.50 CW160M 90060 4174

11.00 15.00 CW160L 93600 4338 7.50 10.00 CW160L 96150 4457

15.00 20.00 CW180M 116300 5391 11.00 15.00 CW180M 135010 6258

18.50 25.00 CW180M 137740 6384 15.00 20.00 CW180L 148810 6897

22.00 30.00 CW180L 148050 6862 18.50 25.00 CW200M 186010 8622

30.00 40.00 CW200M 181250 8401 22.00 30.00 CW200L 196010 9085

37.00 50.00 CW200L 190620 8835 30.00 40.00 CW225M 261950 12141

45.00 60.00 CW225M 250860 11627 37.00 50.00 CW225M 281170 13032

55.00 75.00 CW225M 273020 12654 45.00 60.00 CW250S 365430 16938

75.00 100.00 CW250S 355110 16459 55.00 75.00 CW250M 407400 18883

90.00 120.00 CW250MX 432920 20066 75.00 100.00 CW280S 495780 22979

110.00 150.00 CW280M 483950 22431 90.00 120.00 CW280M 579570 26863

125.00 170.00 CW280MX 525760 24369 110.00 150.00 CW315S 677190 31388

132.00 180.00 CW280MX 564650 26172 125.00 170.00 CW315MX 759630 35209

150.00 200.00 CW315S 628580 29135 132.00 180.00 CW315MX 779570 36133

160.00 215.00 CW315M 653360 30283 150.00 200.00 CW315MX 851690 39476

180.00 240.00 CW315MX 703810 32622 160.00 215.00 CW315MX 863960 40045

200.00 270.00 CW315MX 802110 37178 180.00 240.00 CW355L 1101340 51047

225.00 300.00 CW315MX 907730 42073 200.00 270.00 CW355L 1127620 52265

250.00 335.00 CW355L 1102330 51093 225.00 300.00 CW355L 1164100 53956

275.00 369.00 CW355L 1164890 53993 250.00 335.00 CW355L 1251400 58002

300.00 402.00 CW355L 1214400 56287 275.00 369.00 CW355L 1347780 62470

325.00 435.00 CW355L 1237570 57361 300.00 402.00 CW400LX 1502700 69650

350.00 470.00 CW355L 1315560 60976 325.00 470.00 CW400LX 1670930 77448

SCREEN PROTECTED DRIP PROOF SLIP RING INDUCTION MOTORSEnclosure confirming to protection IP 21/23 Horizontal Foot Mounted (B3),continuously rated (S1) suitable for operation on 415+/- 10% V,3 Phase

50Hz+/- 5% AC supply with ambient Class "F" insulation with temperature rise limited to Class "B" and altitude less than 1000 m above m.s.l. confirming to IS 325

45ºC,



3.70 5.00 CW160M 91920 4260 110.00 150.00 CW315MX 1133020 52515

5.50 7.50 CW160L 97900 4538 125.00 170.00 CW355L 1462110 67769

7.50 10.00 CW180M 135070 6260 150.00 200.00 CW355L 1666750 77254

11.00 15.00 CW180L 158180 7332 160.00 215.00 CW355L 1740290 80662

15.00 20.00 CW200M 191390 8871 180.00 240.00 CW355L 1814590 84106

18.50 25.00 CW200L 201230 9327 200.00 270.00 CW400LX 2106010 97614

22.00 30.00 CW225M 264880 12277 225.00 300.00 CW400LX 2326930 107853

30.00 40.00 CW225M 294050 13629

37.00 50.00 CW250S 370810 17187

45.00 60.00 CW250M 425680 19730

55.00 75.00 CW280S 505320 23422

75.00 100.00 CW280M 551900 25581

90.00 120.00 CW315S 703200 32593

110.00 150.00 CW315MX 760970 35271

125.00 170.00 CW355L 800940 37124

132.00 180.00 CW355L 845790 39202

150.00 200.00 CW355L 1050160 48675

160.00 215.00 CW355L 1183130 54838

180.00 240.00 CW355L 1252210 58040

200.00 270.00 CW355L 1354960 62802

225.00 300.00 CW400LX 1428430 66208

250.00 370.00 CW400LX 1498710 69465

Note : Position of Terminal box on RHS when viewed from DE


20

AC MOTORS SPDP SLIP RING




0.37 0.50 E80 17280 801 0.37 0.50 E80 16970 787

0.55 0.75 E80 19320 895 0.55 0.75 E80 18730 868

0.75 1.00 E80 19910 923 0.75 1.00 E80 19470 902

1.10 1.50 E90L 22240 1031 1.10 1.50 E90L 22240 1031

1.50 2.00 E90L 24890 1154 1.50 2.00 E90L 24160 1120

2.20 3.00 E90L 31110 1442 2.20 3.00 E100L 30730 1424

3.70 5.00 E100L 39520 1832 3.70 5.00 E112M 38940 1805

5.50 7.50 E112M 56120 2601 5.50 7.50 E132M 53570 2483

7.50 10.00 E132M 61900 2869 7.50 10.00 E132M 61020 2828

9.30 12.50 E132M 88230 4089 9.30 12.50 E160L 93360 4327

9.30 12.50 E160L 108680 5037 11.00 15.00 E160L 98640 4572

11.00 15.00 E160L 108680 5037 15.00 20.00 E160L 120190 5571

15.00 20.00 E160L 131880 6113 18.50 25.00 E180L 135910 6299

18.50 25.00 E160L 150040 6954 22.00 30.00 E180L 161540 7487

22.00 30.00 E180L 177240 8215 30.00 40.00 E200L 217660 10089

30.00 40.00 E200L 239220 11088 37.00 50.00 E225S 283500 13140

37.00 50.00 E200L 310400 14387 45.00 60.00 E225M 356900 16542

45.00 60.00 E225M 392270 18182 55.00 75.00 E250M 438450 20322

55.00 75.00 E250M 481570 22321 75.00 100.00 E280M 562910 26091

75.00 100.00 E280M 644690 29881 90.00 120.00 E280M 573820 26597

90.00 120.00 E280M 668020 30963 110.00 150.00 E315M 712210 33011

110.00 150.00 E315M 803690 37251 125.00 170.00 E315M 819720 37994

125.00 170.00 E315M 943270 43721 132.00 180.00 E315M 853860 39576

132.00 180.00 E315M 952900 44167 150.00 200.00 E315L 887660 41143

150.00 200.00 E315L 1047090 48533 160.00 215.00 E315L 896650 41560

160.00 215.00 E315L 1080410 50077 180.00 240.00 E315L 1073270 49746

180.00 240.00 E315L 1295290 60037 200.00 270.00 E315L 1292080 59888

200.00 270.00 E315L 1617790 74985

Note : = Motors in frames E80 to E200L are with Gas Group IIA , IIB.However motors in frames E90L to E200L can be made available with Gas Group I,IIA,IIB on specific request at extra charge.

= Motors in frame E225 to E315L are with Gas Group I,IIA,IIB= Motors with Terminal box on top are also available on request.= Motors with E80 and E315L are with TOP terminal box only,balance frames with RHS from DE= Motors for Gas Group IIC are also available on request.with Terminal Box on Top only.

EFF 2

IS 12615


21

AC MOTORS FLAMEPROOF - FOOT MOUNTED

TOTALLY ENCLOSED FAN COOLED SQUIRREL CAGE FLAMEPROOF INDUCTION MOTORSEnclosure confirming to protection IP 55 Horizontal Foot Mounted (B3),continuously rated (S1) suitable for operation on 415+/- 10% V,3 Phase

50Hz+/- 5% AC supply with ambient,Class "F" insulation with temperature rise limited to Class "B" and altitude less than 1000 m above m.s.l. confirming to IS 2148 . Motors are suitable for Temperature class T4 .

45ºC,




0.37 0.50 E80 19750 915 0.37 0.50 E90L 23120 1072

0.55 0.75 E80 20210 937 0.55 0.75 E90L 25040 1161

0.75 1.00 E90L 23550 1092 0.75 1.00 E100L 30280 1403

1.10 1.50 E90L 24290 1126 1.10 1.50 E100L 35260 1634

1.50 2.00 E100L 35120 1628 1.50 2.00 E112M 42300 1961

2.20 3.00 E112M 40820 1892 2.20 3.00 E132M 55900 2591

3.70 5.00 E132M 54150 2510 3.70 5.00 E132M 90450 4192

5.50 7.50 E132M 65560 3039 5.50 7.50 E160L 103850 4813

7.50 10.00 E160L 101460 4703 7.50 10.00 E160L 126680 5872

9.30 12.50 E160L 117250 5435 9.30 12.50 E180L 161020 7463

11.00 15.00 E160L 124270 5760 11.00 15.00 E180L 169600 7861

15.00 20.00 E180L 166060 7697 15.00 20.00 E200L 229270 10627

18.50 25.00 E200L 206470 9570 18.50 25.00 E225S 284640 13193

22.00 30.00 E200L 223990 10382 22.00 30.00 E225M 374630 17364

30.00 40.00 E225M 367250 17022 30.00 40.00 E250M 460110 21326

37.00 50.00 E250M 450990 20903 37.00 50.00 E280M 590460 27368

45.00 60.00 E280M 548040 25402 45.00 60.00 E280M 603010 27950

55.00 75.00 E280M 591170 27401 55.00 75.00 E315M 734720 34054

75.00 100.00 E315M 719840 33365 75.00 100.00 E315M 860540 39886

90.00 120.00 E315M 844110 39124 90.00 120.00 E315L 941900 43657

110.00 150.00 E315L 925470 42896 110.00 150.00 E315L 1178080 54604

125.00 170.00 E315L 1095050 50756

132.00 180.00 E315L 1121770 51994

150.00 200.00 E315L 1312710 60844

Note := Motors in frames E80 to E200L are with Gas Group IIA , IIB.However motors in frames E90L to E200L can be made available with Gas Group I,IIA,IIB on specific request at extra charge.

= Motors in frame E225 to E315L are with Gas Group I,IIA,IIB= Motors with Terminal box on top are also available on request.= Motors with E80 and E315L are with TOP terminal box only,balance frames with RHS from DE= Motors for Gas Group IIC are also available on request.with Terminal Box on Top only.

EFF 2

IS 12615


22

AC MOTORS FLAMEPROOF - FOOT MOUNTED

TOTALLY ENCLOSED FAN COOLED SQUIRREL CAGE FLAMEPROOF INDUCTION MOTORSEnclosure confirming to protection IP 55, Horizontal Foot Mounted (B3),continuously rated (S1) suitable for operation on 415+/- 10% V,3 Phase

50Hz+/- 5% AC supply with ambient, Class "F" insulation with temperature rise limited to Class "B" and altitude less than 1000 m above m.s.l. confirming to IS 2148 . Motors are suitable for Temperature class - T4

45ºC,


EFF 2

IS 12615

Note : = Motors in frames E80 to E200L are with Gas Group IIA , IIB. However motors in frames E90L to E200L can be made available with Gas Group I, IIA, IIB on specific request at extra charge.

= Motors in frame E225 to E315L are with Gas Group I,IIA, IIB= Motors for Gas Group IIC and other motors with Terminal box on top are also available on request.



0.37 0.50 E80 17790 825 0.37 0.50 E80 17490 811

0.55 0.75 E80 19910 923 0.55 0.75 E80 19280 894

0.75 1.00 E80 20490 950 0.75 1.00 E80 20050 929

1.10 1.50 E90L 22900 1061 1.10 1.50 E90L 22900 1061

1.50 2.00 E90L 25620 1187 1.50 2.00 E90L 24870 1153

2.20 3.00 E90L 32030 1485 2.20 3.00 E100L 31660 1467

3.70 5.00 E100L 40690 1886 3.70 5.00 E112M 40100 1859

5.50 7.50 E112M 57810 2679 5.50 7.50 E132M 55180 2558

7.50 10.00 E132M 63770 2956 7.50 10.00 E132M 62840 2913

9.30 12.50 E132M 90890 4213 9.30 12.50 E160L 96150 4457

9.30 12.50 E160L 111950 5189 11.00 15.00 E160L 101600 4709

11.00 15.00 E160L 111950 5189 15.00 20.00 E160L 123790 5738

15.00 20.00 E160L 135840 6296 18.50 25.00 E180L 142690 6614

18.50 25.00 E160L 154540 7163 22.00 30.00 E180L 169620 7862

22.00 30.00 E180L 186110 8626 30.00 40.00 E200L 228550 10593

30.00 40.00 E200L 251190 11643 37.00 50.00 E225S 297690 13798

37.00 50.00 E200L 325930 15107 45.00 60.00 E225M 374740 17369

45.00 60.00 E225M 411870 19090 55.00 75.00 E250M 460380 21339

55.00 75.00 E250M 505640 23436 75.00 100.00 E280M 591060 27396

75.00 100.00 E280M 676920 31375 90.00 120.00 E280M 602530 27927

90.00 120.00 E280M 701420 32511 110.00 150.00 E315M 747810 34661

110.00 150.00 E315M 843880 39114 125.00 170.00 E315M 860710 39894

125.00 170.00 E315M 990420 45906 132.00 180.00 E315M 896560 41556

132.00 180.00 E315M 1000550 46375 150.00 200.00 E315L 932050 43201

150.00 200.00 E315L 1099450 50960 160.00 215.00 E315L 941500 43639

160.00 215.00 E315L 1134420 52580 180.00 240.00 E315L 1126940 52234

180.00 240.00 E315L 1360050 63038 200.00 270.00 E315L 1356690 62883

200.00 270.00 E315L 1698690 78734


23

AC MOTORS FLAMEPROOF FLANGE & FOOT CUM FLANGE

TOTALLY ENCLOSED FAN COOLED SQUIRREL CAGE FLAMEPROOF INDUCTION MOTORS- FLANGE & FOOT CUM FLANGEEnclosure confirming to protection IP 55, Flange Mounted (For 180 & above B5 or V1 ) and foot cum flange mounted from 80 to 355 frame

,continuously rated (S1) suitable for operation on 415+/- 10% V,3 Phase 50Hz+/- 5% AC supply with ambient, Class "F" insulation with temperature rise limited to Class "B" and altitude less than 1000 m Above m.s.l. Confirming to IS 2148 .

Motors are suitable for Temperature class T4.

45ºC,


TOTALLY ENCLOSED FAN COOLED SQUIRREL CAGE FLAMEPROOF INDUCTION MOTORS FLANGE & FOOT CUM FLANGE MOUNTEDEnclosure confirming to protection IP 55, Flange Mounted (For 180 & above B5 or V1 ) and foot cum flange mounted from 80 to 355 frame

,continuously rated (S1) suitable for operation on 415+/- 10% V,3 Phase 50Hz+/- 5% AC supply with ambient,Class "F" insulation with temperature rise limited to Class "B" and altitude less than 1000 m above m.s.l. confirming to IS 2148 .

Motors are suitable for Temperature class T4.

45ºC,



0.37 0.50 E80 20350 943 0.37 0.50 E90L 23830 1105

0.55 0.75 E80 20800 964 0.55 0.75 E90L 25780 1195

0.75 1.00 E90L 24280 1125 0.75 1.00 E100L 31210 1447

1.10 1.50 E90L 25030 1160 1.10 1.50 E100L 36330 1684

1.50 2.00 E100L 36180 1677 1.50 2.00 E112M 43560 2019

2.20 3.00 E112M 42050 1949 2.20 3.00 E132M 57590 2669

3.70 5.00 E132M 55770 2585 3.70 5.00 E132M 93150 4318

5.50 7.50 E132M 67530 3130 5.50 7.50 E160L 106960 4958

7.50 10.00 E160L 104510 4844 7.50 10.00 E160L 130470 6047

9.30 12.50 E160L 120760 5597 9.30 12.50 E180L 169050 7835

11.00 15.00 E160L 128000 5933 11.00 15.00 E180L 178080 8254

15.00 20.00 E180L 174360 8082 15.00 20.00 E200L 240750 11159

18.50 25.00 E200L 216810 10049 18.50 25.00 E225S 298880 13853

22.00 30.00 E200L 235200 10902 22.00 30.00 E225M 393360 18232

30.00 40.00 E225M 385620 17873 30.00 40.00 E250M 483110 22392

37.00 50.00 E250M 473560 21950 37.00 50.00 E280M 619980 28736

45.00 60.00 E280M 575450 26672 45.00 60.00 E280M 633160 29347

55.00 75.00 E280M 620720 28770 55.00 75.00 E315M 771450 35757

75.00 100.00 E315M 755840 35033 75.00 100.00 E315M 903580 41881

90.00 120.00 E315M 886310 41080 90.00 120.00 E315L 989000 45840

110.00 150.00 E315L 971740 45040 110.00 150.00 E315L 1236980 57334

125.00 170.00 E315L 1149810 53294

132.00 180.00 E315L 1177850 54593

150.00 200.00 E315L 1378340 63886

Note : Motors in frames E80 to E200L are with Gas Group IIA , IIB.However motors in frames E90L to E200L can be made available with Gas Group I,IIA,IIB on specific request at extra charge.

Motors in frame E225 to E315L are with Gas Group I,IIA,IIBMotors for Gas Group IIC and other motors with Terminal box on top are also available on request.

=

=

=

EFF 2

IS 12615


24

AC MOTORS FLAMEPROOF FLANGE & FOOT CUM FLANGE


TOTALLY ENCLOSED FAN COOLED SQUIRREL CAGE FLAMEPROOF INDUCTION MOTORS- Enclosure confirming to protection IP 55 for frame E355LX,continuously rated (S1) suitable for operation on 415+/- 10% V, 3 Phase 50Hz+/- 5%

AC supply with ambient,Class "F" insulation with temperature rise limited to Class "B" and altitude less than 1000 m Above m.s.l. confirming to IS 2148 . Motors are suitable for Temperature class T4 .Gas group IIA IIB

45ºC,



225.00 300.00 E355LX 2022240 93731 225.00 300.00 E355LX 1707980 79165

250.00 335.00 E355LX 2123350 98417 250.00 335.00 E355LX 1759970 81575

275.00 370.00 E355LX 2229520 103338 275.00 370.00 E355LX 1800550 83455

315.00 425.00 E355LX 2341010 108506 315.00 425.00 E355LX 1977210 91644

325.00 435.00 E355LX 2580950 119627 325.00 435.00 E355LX 2076060 96225



160.00 215.00 E355LX 1413380 65510 132.00 180.00 E355LX 1321020 61229

180.00 240.00 E355LX 1540500 71402 160.00 215.00 E355LX 1500680 69557

200.00 270.00 E355LX 1621580 75160 180.00 240.00 E355LX 1575710 73034

225.00 300.00 E355LX 1702690 78920 200.00 270.00 E355LX 1717530 79608

250.00 335.00 E355LX 1804810 83653

275.00 370.00 E355LX 1895060 87836

= Motors are with Terminal box on top = Motor for gas group IIC also available


25

AC MOTORS FLAMEPROOF - E355LX FRAME


TOTALLY ENCLOSED FAN COOLED SQUIRREL CAGE & SLIPRING CRANE DUTY MOTORS

MOUNTING : FOOT PROTECTION : IP 55

VOLTAGE : 415 VOLTS ± 10% RATING : S3/ S4 ( AS PER IS 325-1996)

FREQUENCY : 50 Hzs. ± 5% DUTY : INTERMITTENT

COMBINED : 10% (ABSOLUTE SUM) INSULATION : CLASS F, TEMP RISE-CLASS B

AMBIENT: 45°C

TEFC CRANE DUTY SQUIRREL CAGE INDUCTION MOTORS

FRAME 4 POLE : 1500 RPM FRAME 6 POLE : 1000 RPM FRAME 8 POLE : 750 RPM

PRICE EX.DUTY PRICE EX.DUTY PRICE EX.DUTY

GD63 8720 404 GD71 10150 470 ND90S 12010 557

GD71 9260 429 ND80 10910 506 ND90L 13540 628

ND80 10300 477 ND90S 11700 542 ND100L 16290 755

ND90S 11350 526 ND90L 13550 628 ND112M 22900 1061

ND90L 12410 575 ND100L 17690 820 ND132S 30390 1409

ND100L 16730 775 ND112M 21050 976 ND132M 47910 2221

ND112M 20970 972 ND132S 30970 1435 ND160M 58400 2707

ND132S 28890 1339 ND132M 34470 1598 ND160L 76030 3524

ND132M 33760 1565 ND160M 55650 2579 ND180L 107790 4996

ND160M 52600 2438 ND160L 65730 3047 ND200L 152670 7076

ND160L 67030 3107 ND180L 100190 4644 ND225M 222300 10304

ND180M 93700 4343 ND200L 129460 6000

ND180L 100800 4672 ND225M 203530 9434

ND200L 134480 6233

ND225S 174610 8093

ND225M 211640 9810

Note : Position of Terminal Box RHS when viewed from DE

TEFC CRANE DUTY SLIPRING INDUCTION MOTORS

FRAME 6 POLE FRAME 8 POLE FRAME 10 POLE

PRICE EX DUTY PRICE EX DUTY PRICE EX DUTYNDW112M 53460 2478 NDW112M 56970 2641 NDW112M -DW132S 70410 3264 DW132S 75640 3506 DW132S -DW132M 84140 3900 DW132M 101630 4711 NDW132M -NDW160M 95460 4425 NDW160M 110080 5102 NDW160M -NDW160L 118070 5473 NDW160L 137130 6356 NDW160L -NDW180L 177720 8237 NDW180L 184030 8530 NDW180L -NDW200L 233670 10831 NDW200L 239820 11116 NDW200L -NDW225S 289010 13396 NDW225S 311770 14451 NDW225S 292560 13560NDW225M 356660 16531 NDW225M 356660 16531 NDW225M 342830 15890NDW250S 445830 20664 NDW250S 434290 20129 NDW250S 368950 17101NDW250M 538070 24940 NDW250M 540830 25067 NDW250M 431990 20023NDW280S 591860 27433 NDW280S 604160 28003 NDW280S 653370 30284NDW280M 691790 32064 NDW280M 657970 30497 NDW280M 714860 33134NDW315S 827070 38335 NDW315S 882420 40900 NDW315S 910090 42183NDW315M 937760 43465 NDW315M 957750 44392 NDW315M 953600 44199

Note : Position of Terminal box on Top .Regd. Office : CG House, 6th Floor, Dr. Annie Besant Road, Worli, Mumbai - 400 030.

26

AC MOTORS CRANE DUTY


TOTALLY ENCLOSED FAN COOLED SQUIRREL CAGE INDUCTION MOTORS FOR TEXTILE APPLICATIONSEnclosure confirming to protection IP 54 Horizontal Foot Mounted (B3),continuously rated (S1) suitable for operation on 415+/- 10% V,3 Ph

50Hz+/- 5% AC supply with ambient Class "F" insulation with temp. rise limited to Class "B" and altitude less than 1000 m above m.s.l. confirming to IS 325 with clean flow construction.

45ºC,

OUTPUT 6 POLE -1000 RPM OUTPUT 8 POLE -750 RPM


0.75 1.00 NR90L 15070 698 0.75 1.00 R112M 15380 713

1.10 1.50 R112M 17530 813 1.10 1.50 R112M 20300 941

1.50 2.00 R112M 20140 933 1.50 2.00 R132S 22620 1048

TOTALLY ENCLOSED(TE) SQUIRREL CAGE INDUCTION MOTORS FOR CARD APPLICATION

TERMINAL BOX ON TOP , 3 LEAD , STAR CONNECTED

OUTPUT 6 POLE -1000 RPM


1.10 1.50 NR112M 11450 531

1.50 2.00 NR112M 21180 982

2.20 3.00 NR132S 25730 1193

TOTALLY ENCLOSED FAN COOLED SQUIRREL CAGE INDUCTION MOTORS FOR GINNING APPLICATION

TERMINAL BOX ON RHS .

100 FRAME WITH 3 LEAD , STAR CONNECTED & OTHERS , 6 LEAD , DELTA CONNECTED

OUTPUT 4 POLE -1500 RPM


2.20 3.00 ND100L 15920 738

3.00 4.00 ND112M 20410 946

3.70 5.00 ND132S 24010 1113

5.50 7.50 ND132S 28450 1319

7.50 10.00 ND132M 32850 1523

CONE MOTOR : EFF1 AS PER IS:12615

TERMINAL BOX ON TOP , 6 LEAD DELTA CONNECTED



3.7 5.0 ND112M 22660 1050

CONFORMING TO EFF-2 LEVEL AS PER 'IS' OR HIGHER

TOTALLY ENCLOSED(TE) SQUIRREL CAGE INDUCTION MOTORS FOR LOOM/WEAVING APPLICATION TERMINAL BOX ON RHS , 3 LEAD , STAR CONNECTED

EFF 1

IS 12615


27

AC MOTORS AC TEXTILE MOTORS


OUTPUT 4 POLE : 1500 RPM OUTPUT 6 POLE -1000 RPM


3.70 5.0 ND112M 22650 1050 3.70 5.00 ND132S 33060 1532

5.50 7.5 ND132S 31060 1440 5.50 7.50 ND132M 36890 1710

7.50 10.0 ND132M 36380 1686

9.3 12.5 ND160M 57480 2664

11.0 15.0 ND160M 59280 2748

13.0 17.5 ND160L 71700 3323

15.0 20.0 ND160L 73660 3414

18.5 25.0 ND180M 103760 4809

22.0 30.0 ND180L 110560 5124

30.0 40.0 ND200L 149150 6913

37.0 50.0 ND225S 191790 8889

45.0 60.0 ND225M 232470 10775

RING FRAME, TEXTILE MOTOR : TB TOP, AMBIENT :45°C, RISE 75°C , EFF-1 AS PER IS12615

ROLLER BEARING AT DE FOR 160 FR. AND ABOVE TO SUSTAIN HIGHER RADIAL LOAD

EFF 1 IS 12615

TB POSITION : SIDE AVAILABLE ON REQUESTSUITABLE FOR DRAW FRAMES ,SPEED FRAMES SPINNING FRAMES AND DOUBLING FRAMES


28

AC MOTORS AC TEXTILE MOTORS



29

AC MOTORS LIFT DUTY (DOUBLE CIRCUIT)


LIFT DUTY (DOUBLE CIRCUIT VENTILATED - DCV) IP23 SQUIRREL CAGE INDUCTION MOTORSEnclosure confirming to protection IP 23 Horizontal Foot Mounted (B3), continuously rated (S1) suitable for operation on

415+/- 10% V,3 Phase 50Hz+/- 5% AC supply with ambient Class "F" insulation with temperature rise limited to Class "B" and altitude less than 1000 m above m.s.l. confirming to IS 7358

45ºC,



2.20 3.00 NC100L 14490 672 2.20 3.00 NC112M 14350 665

3.70 5.00 NC112M 18500 857 3.70 5.00 NC132S 27810 1289

5.50 7.50 NC132S 24650 1143 5.50 7.50 NC132M 29000 1344

7.50 10.00 NC132M 29780 1380

THRESHER MOTOR

Enclosure confirming to protection IP 54 Horizontal Foot Mounted (B3),continuously rated (S1) suitable for operation on

415+/- 10% V,3 Phase 50Hz+/- 5% AC supply with Class "F" insulation 40ºC ambient upto 132 frame,

and altitude less than 1000 m above m.s.l. confirming to IS 7358



3.70 5.00 ND132S 25260 1171

5.50 7.50 ND132M 28030 1299

1640330 79408

2007318 97174

CG Alternators - Brushless Type ---3000 RPMScreen Protected Drip Proof with enclosure conforming to protection IP 23, Horizontal Foot Mounted (B3), 3000 RPM, 2 Pole, 0.8 PF (lag),

Voltage Regulation +/-1%, Single Bearing suitable for operations upto 40 Deg C Ambient Temperature & 1000 mtr altitude,Temp. rise limited to class `H' limits.

CG Alternators - Slip Ring Type ---1500 RPM Screen Protected Drip Proof with enclosure conforming to protection IP 23, Horizontal Foot Mounted (B3), 1500 RPM, 4 Pole, 0.8 PF (lag),

Voltage Regulation +/-5%, Double Bearing suitable for operations upto 40 Deg C Ambient Temperature & 1000 mtr altitude , Temp. rise limited to class `H' Limits .

These Alternators are also available in Double Bearing construction.

3 Phase, 415 V 1 Phase, 240 V

kVA Frame Price (Rs.) Ex. Duty Rs. kVA Frame Price (Rs.) Ex. Duty Rs.

5 G2S132MR 29570 1431 5 G2S132MA 34130 1652

6.5 G2S132MR 29800 1443 6 G2S132MC 38980 1887

7.5 G2S132MA 37880 1834 7.5 G2S132MD 42450 2055

10 G2S132MC 43430 2102 10 G2S160S1B 48390 2343

12.5 G2S132MD 48390 2343 12.5 G2S160SC 59940 2902

15 G2S160S1A 51510 2494 15 G2S160M2A 70800 3427

20 G2S160SC 69300 3355 20 G2S200SE 101290 4903

25 G2S160M2A 77960 3774

30 G2S160M2R 87550 4238

32.5 G2S160M2R 89860 4350

35 G2S200SE 94940 4596

40 G2S200SE 101290 4903

45 G2S200SB 108690 5262

50 G2S200SB 112960 5468

63 G2S200SD 140680 6810

75 G2S200MD 152690 7392

82.5 G2S200MD 158350 7666

Slip Ring Alternators are also available in Single Bearing construction with 3% extra charges of net price.

3 Phase, 415 V 1 Phase, 240 V

kVA Frame Price (Rs.) Ex. Duty kVA Frame Price (Rs.) Ex. Duty

5 G1R132MR/2 57610 2789 5 G1R132MR/2 57850 2801

7.5 G1R132MA/2 58970 2855 6 G1R132MA/2 61490 2977

10 G1R132MC/2 61830 2993 7.5 G1R132MC/2 66420 3215

12.5 G1R160S1A/2 65930 3192 10 G1R160S1A/2 73500 3558

15 G1R160S1A/2 73250 3546 12.5 G1R160SB/2 86540 4189

20 G1R160SB/2 86540 4189 15 G1R160SC/2 97970 4743

25 G1R160SC/2 98580 4772

30 G1R160MA/2 111990 5421

ALTERNATORS


31


Cash Extra's for special Features -- ALTERNATORS

1) Additional Prices for Accessories

Frame 132 160 200 250 315 355

RTD (2 per phase) Not Offered Not Offered Not Offered 10000/- 20000/- 20000/-

BTD Rs. Each Not Offered Not Offered Not Offered Not offered 10000/- 10000/-

Space Heaters 3000/- 3000/- 4000/- 4000/- 6000/- 7200/-

Thermisters ( 2 / Phase) Not Offered Not Offered 13500/- 13500/- 13500/- 16500/-

Special Epoxy Paint 5000/- 5000/- 6000/- 6000/- 13500/- 16000/-

Radio Suppression capacitor 4400/- 4400/- 4400/- 4400/- 4400/- 4400/-

AVR Suitable for Parallel Operations 1500/- 1500/- Standard

Short Circuit Maintenance Kit 2400/- 2400/- 6000/- 6000/- 8000/- 8000/-

Note : RTD , BTD, Space Heaters are without controls.

DC injection facility for parallel operation is supplied as standard in alternators of 180 KVA & above.

Parallel operation with QDCT is standard in alternators of 180 KVA & above

Parallel operation without QDCT is standard in alternators of 45 KVA to 160 KVA.

2) Inspection Charges

Type Test 6000/- 6000/- 9600/- 9600/- 12000/- 15000/-

Routine Test 2400/- 2400/- 3600/- 4800/- 4800/- 6000/-

Notes :

1) For Prices of other accessories and spares we have separate Price List.

2) All prices are valid delivery ex-our godown.

3) All Alternators comply with IS 13364, IS 4722:1992 for specifications of rotating electric machines .

4) Taxes and duties extra at actual.

5) Inspection charges are for standard Alternators .

6) Upto 200kVA Alternators are in Aluminium Stator frames.

7) For non-standard, marine duty Alternators , please contact our nearest Branch Office.

8)The list prices are maximum recommended prices. However, prices lower than this can be charged.

9) The list prices are subject to change without prior notice.

ALTERNATORS


32


List Price List PriceRated KW Frame ASBG Rs.Each Ex.Duty Rs. Rated KW Frame ASBG Rs.Each Ex.Duty Rs.

2.2 100S 28480 2229 75 180S 186990 146383.7 100M 29390 2301 80 180S 188270 147385.5 100L 33760 2643 100 180M 214600 167997.5 112M 45600 3570 115 200S 234700 183729.3 132S 50130 3924 135 200M 291060 2278411 132S 51280 4014 150 200M 293710 2299215 132M 62120 4863 180 225S 348000 2724118.75 132L 67680 5298 210 225M 396040 3100222.5 132L 68490 5361 225 225M 398120 3116530 160A 105290 8242 235 250S 477940 3741340 160S 116770 9141 280 250S 478050 3742250 160M 132010 10334 295 250S 480250 3759456 160M 138830 10868 325 250M 506000 3961060 160L 151420 11853 400 280S 619080 48462

450 280M 657660 51482

Laminated Yoke DC MotorsScreen protected Drp Proof with enclosure confirming to protection IP 23,Horizontal foot mounted (B3),

Base speed 1500 RPM,Blower cooled (IC06) suitable for operations upto 40 Degree C Ambient Temperature &1000 mtr altitude, Insulation class F with temperature rise limited to class 'F' limits for Frame 100S to 132L,

Insulation class H with temperature rise limited to class 'H' for Frame 160A to 280M,Armature voltage 440V &Field voltage 220V for frame 100S to 280M

FORCE COOLED (IP23) : CONTINIOUS DUTY

Mill duty motors are confirming to AISE/IPSS standard

Solid Yoke DC Motors

Rated KW Nett Price Nett Price

Rs.TENV (IP 55) Rs. Force Cooled (IP23)

ABS802 137500 161700

ABS803 170500 196350

ABS804 214500 248330

ABS806 313500 346500

ABS808 368500 415800

ABS810 423500 473550

ABS812 712800 785400

ABS814 844800 929780

ABS816 981200 1068380

Mill Duty DC Motors ( Non split Type)

Frame Nett Price Rs. Each Frame Nett Price Rs. EachAES 160U 69870 AFS225S 165740

AES160A 75650 AFS225M 202130

AES160S 90660 AFS225L 222330

AES160M 109730 AFS225X 255260

AFS180U 80850 AFS280A 311850

AFS180A 89510 AFS280S 328020

AFS180S 103950 AFS280M 376530

AFS180M 123000

Frames 315 S/M/L also available on requirement

DC MOTORS


33


Cash extras for Special features

1. Additional Prices for Accessories

Frame 100 112 132 160 180 200 225 250 280

Shaft

Extension 5% of List Price

DE Flange 3% of List Price

RTD Rs.3000/- Rs.5000/-

BTD Not offered Rs.10000/-

Thermisters Rs.1600/- Rs.3100/-

Space Heater Rs.1250/- Rs.2500/-

Blower Filter Rs.4000/- RS.5500/- Rs.9000/- Rs.12000/-

2.Inspection Charges

Routine Test Rs.2000/- Rs.3000/- Rs.5000/-

Type Test Rs.5000/- Rs.7000/- Rs.10000/-

RTD , BTD , Space Heaters and Thermisters are without controls .

NOTES:

1) List prices are valid for delivery for delivery ex-godown.

2) Excise duty, VAT / Sales Tax,Octroi and other statutory taxes,duties and levies would be charged extra as applicable.

3) Prices are subject to change without prior notice.

4) The list prices are maximum recommended prices,However,prices lower than this can be charged.

5) Condition for sales: The price list is subjected to our standard 'Genral terms and condirtions of Tender and Sale'.

6) For more details contact our nearest office.

DC MOTORS


34


Our All India Service Centre Toll free No : 1800-419-0505

MANUFACTURING UNIT :

AHMEDNAGAR WORKS Unit -I AHMEDNAGAR WORKS Unit -II GOA WORKS- Unit III

A-6/2 , MIDC, B-108/109, MIDC S-14/15 Colvale Industrial Estate Ahmednagar : 414 111. Ahmednagar 414 111 Colvale Bardez Goa 403 513Phone : 0241-2776150 to 58, 2776208 Phone : 0241-277145, 2778534 Phone : 0832-2299664 / 66FAX : 0241-2777800 Fax : 0241-2777162 FAX ; 0832-2299663

Regional sales Offices :

North : Vandana , 11, Tolstoy Marg, New delhi : 110 001 , Phone : 011-30416315 , 23352161/162

East : 50, Chowringhee Road, Kolkata : 700 071., Phone : 033-22829681/ 85

West : Kanjur Marg (E) , mumbai : 400 042. Phone : 022-6755 8632 , 33 , 36 & 67558000

South : 3-A, MGR Salai (K.H. road), Nungambakkam, Chennai : 600 034 . Phone : 044-42247525

Branch Offices

North WestLucknow :0522-3018850 / 59 Ahmedabad :079- 4001200 , 40012201

Jalandhar :0181-2223801 , 2459467 Indore :0731-2498269 , 2498276

Jaipur :0141 -2376919, 2376307 Nagpur :0712-2531271 , 2560870 / 71

Pune :020-25534675 / 77

Raipur : 0771 - 4022215

East SouthBhubaneswar :0674-2531128,2531429 Bangalore :080-41391931 , 41391908 / 909

Patna :0612-2239405 Secunderabad :040-40002300 , 40002347

Guwahati :0361-2543830 , 255018 Cochin :0484-2370860 / 63, 2360240

TERMS OF SALE :

1) This price list supercedes our price list LTM/004

Current price list no LTM/005 Rev 0 Dt 05.01.11

2) For Prices of other accessories and spares we have separate Price List.

3) Refer page for details of cash extra's. For Other pl contact CGL's nearest office .

4) Taxes &Duties : The List Prices are exclusive of Excise Duties ,Sales Tax and any other Central ,State or Local

Taxes, Octroi and other leves. These will be charged extra at the rates ruling on the date of supply.

5) Excise Duty shown in Price List is inclusive of Educational Cess

6) Delivery: List Prices are valid for delivery ex-our godown

7) Conditions for Sales: The Price List is subjected to our standard 'General Terms and Conditions of Tender and Sale"

and prices are subject to revision without prior notice .

8) General:

a) Due to improvement being made from time, frame sizes indicated above are provisional and

subject to change without prior notice.

b) The list prices are maximum recommended prices. However prices lower then this can be charged.

c) The list prices are subjected to change without prior notice

d) Motor outputs are given in KW & HP. However KW is binding &HP is approximate

e) For more details ,please contact us.

35

DC MOTORS



price list 05.01.2011 3 - prakash electric...

Documents