price bid iv 66kv gis office...sign & seal of bidder 3 summary name of work : engineering,...

Sign & seal of Bidder 1

GUJARAT ENERGY TRANSMISSION CORPORATION LIMITED SARDAR PATEL VIDYUT BHAVAN

RACE COURSE, VADODARA - 390 007

TENDER FOR

Engineering, manufacturing, supply, erection, testing & commissioning of 66 kV GIS equipments, materials on turn key basis including all civil works

at 66kVLal Bunglow S/S,Jamnagar.

TENDER NO : GETCO / TURN KEY /66KV GIS/25

PART – IV

Price Bid


This page has been kept intentionally Blank.


SUMMARY

Name of work : Engineering, manufacturing, supply, erection, testing & commissioning of 66 kV GIS equipments, materials on turn key basis including all civil works

at 66kVLal Bunglow S/S,Jamnagar.

Sr No Name of S/S Supply Erection Civil Total in

Rs. 1 66 kV GIS

TOTAL

(Figure in words : ______________________________________________________)

Bidder's Name : ____________________________ Signature : ____________________________ Name : ____________________________ Designation : ____________________________

Bidder's Seal Date : ___________________________


ANNEXURE – A to Bidding schedule for supply pricesName 0f Substation :---------------------

Sr.No. Description

Qty.

In

Nos.

Rate unitEx Works

UnitF.O.R. in

Rs.

(4 + 5+6)

Excise duty.

% as well as amount

Sale Tax

% as well as amount

CST = ON (4+9)

VAT = ON (4+9)

Unit endCost Pricein Rs.

(7+9+11)

Total Amount

in Rs

Frei-ghtcharges

Insurance

charges

10 11

Rate in %

1 2 3 4

5 6

7 8

Rate in % ofEx-Works

price

9

Unit E.D.

Amount Rs. CST VAT

Total

amountRs.

12 13

FOR COSTIN RS.

(3 X 7 )

14END

COSTIN RS.

(3 X 12 )

Total

Material Description & Qty. shall be as per supply price schedules

I/ We agree to supply the articles noted above at the rates herein tendered by me/ us subject to the condition of tender and supply of the Tender inquiry,which I / We have carefully read and thoroughly understood.

I/ We hereby agree to keep this offer open for 180 days after the date of the opening of technical bid of tenders and shall be bound by communication ofacceptance dispatched within the prescribed time.

Bidder's Name : ____________________________Signature : ____________________________

Name : ____________________________Designation : ____________________________

Bidder's seal Date : ___________________________*


ANNEXURE – B -Bidding schedule for erection & commissioning prices Name of Substation:----------------------

Amount in Rs.

• Material Description & Qty. shall be as per Erection price schedule.

I/ We agree to execute the articles noted above at the rates herein tendered by me/ us subject to the condition of tender and execute of the Tender inquiry, which I / We have carefully read and thoroughly understood .

I/ We hereby agree to keep this offer open for 180 days after the date of the opening of technical bid of tenders and shall be bound by communication of acceptance dispatched within the prescribed time. Bidder's Name : ____________________________ Signature : ____________________________ Name : ____________________________ Designation : ____________________________


SR. NO.

Description

Unit No./ wt.

Qty. Particulars

Erection/Commissioning rate per unit

Service tax

Any other Tax

Unit rate of erection & comm. charges + service tax +any other tax

Total erection &commissioning charges on end cost basis (Qty. x Unit rate

TOTAL


ANNEXURE – C -Bidding schedule for Civil works Name of Substation:----------------------

Amount in Rs.

• Material Description & Qty. shall be as per CIVIL WORKS schedule. • The service tax shall be reimbursed on production of evidence of payment of service tax to

appropriate authority by contractor.

I/ We agree to execute the articles noted above at the rates herein tendered by me/ us subject to the condition of tender and execute of the Tender inquiry, which I / We have carefully read and thoroughly understood.

I/ We hereby agree to keep this offer open for 180 days after the date of the opening of technical bid of tenders and shall be bound by communication of acceptance dispatched within the prescribed time. Bidder's Name : ____________________________ Signature : ____________________________ Name : ____________________________ Designation : ____________________________


SR. NO.

DESCRIPTION UNIT QTY. RATE IN FIGURE

RATE IN WORDS AMOUNT

TOTAL Service tax @33.33%on10.3% TOTAL AMOUNT IN WORDS


SUPPLY & ERECTION SCHEDULE FOR 66 KV GIS Name of work : Engineering, manufacturing, supply, erection, testing & commissioning of 66 kV GIS equipments, materials on turn key basis including all civil works at 66kVLal Bunglow S/S,Jamnagar.

Sr. No. Particulars of Item Unit Erection

Qty. Supply

Qty. A SF6 GIS UNITS as per technical specifications No.

i) Supply and Erection of 66 kV double bus GIS bay suitable for line - consist of SET 2 2

1 Circuit breaker, 72.5 kV, 1600A, 25 kA - 3 sec - 1 no

2 Current transformer ring or torroidal type multi ratio, 600-300/1A 3C- 1no for each phase

3 Line side isolator 72.5 kV, 1600A, 25 kA - 3 sec - 1 no with one maintanance earthing switch, 25 kA - 3 sec - 1 set

4 High speed/Fast Acting Line Earthing switch 72.5 kV, 25 kA - 3 sec, - 1 no

5 Voltage Transformer, 72.5 kV, 66KV/√3//110V/√3, 2C

6 Bus Dis connector switch 72.5 kV, 1600A, 25 kA - 3 sec, with Earthing switch 25 kA - 3 sec - 2 set

7 GIS cable termination suitable for 3 phase, 66 kV, 1C, 630 sqmm, aluminum conductor, XLPE power cable - 1 set, as per IEC-60589

8 Lightning Arrester, 60 kV, 10 kA, class 2 for each phase - 1 set 9 LCC and Control & Protection Panels as per respective specifications

ii) Supply and Erection of 66kV double bus GIS bay suitable for Transformer - consist of SET 3 3



3 Bus Disconnector switch 72.5 kV, 1600A, 25 kA - 3 sec - 2 nos, with one Earthing Switch 25 kA - 3 sec - 2 Set

4 Maintenance Earthing switch on transformer side, 25 kA - 3 sec - 1 no.

5 GIS cable termination suitable for 3 phase, 66 kV, 1C, 630 sqmm, aluminum conductor, XLPE power cable - 1 set, as per IEC-60589

6 LCC and Control & Protection Panels as per respective specifications

iii) Supply and Erection of 66kV double bus GIS bay suitable for bus coupler - consist of SET 1 1



3 Disconnector 72.5 kV, 1600 A, 25 kA - 3 sec with earthing switch 25 kA - 3 sec with earthing switch for bus 1

4 Disconnector 72.5 kV, 1600 A, 25 kA - 3 sec with earthing switch 25 kA - 3 sec with earthing switch for bus 2

5 High speed/Fast Acting Line Earthing switch 72.5 kV, 25 kA - 3 sec, - 1 no on bus VT for bus no.1 & 2 towards bus side - 2 no

6 Voltage Transformer, 72.5 kV, 66KV/√3//110V/√3, 2C for Bus 1 7 Voltage Transformer, 72.5 kV, 66KV/√3//110V/√3, 2C for Bus 2

8 Disconnector 72.5 kV, 1600 A, 25 kA - 3 sec with 1 earthing switch for VT - bus 1


9 Disconnector 72.5 kV, 1600 A, 25 kA - 3 sec with 1 earthing switch for VT - bus 2

10 LCC and Control & Protection Panels as per respective specifications

B Supply and Erection of 66kV conventional outdoor Equipments as per respective technical specifications for transformer bay.

1 Power Transformer 66/11kV 20MVA with oil and accessories. As per specification. No. 2 2

2 Surge Arrester 60 kV Class 2, 10kA for transformers with structure and clamp connectors No. 6 6

3 BPI 4kN with structure and clamp connectors No. 6 6

4 11 kV outdoor bus arrangement (Drg No. GETCO/E/06S- STD/STR-028 (5 sheets) is attached only for reference.) set 2 2

566 kV 3x1c, 630 sqmm, aluminum conductor XLPE cable outdoor termination with necessary support & other required material complete. Drg. No. GETCO/E/06S-036/P-005 is attached only for reference.

Lumpsum 2 2

611 kV DP on girder pole with A B switch for outgoing feeders. Drg. No. GETCO/E/06S-036/SPL-015 (2 sheets) is attached only for reference.

Set 12 12

C Gas filling and Evacuating Plant/Gas reclaimer for 66 kV GIS unit. (Item indicated at cl. No. 1.17 of specification) SET 0 1

D SPARES i) Spare GIS module as per specification for following items. a CT - (3 core line & 4 core transformer) each No. 0 1 b BREAKER No. 0 1 c DISCONNECTOR No. 0 1 d LA No. 0 1 e VT No. 0 1 f High speed/Fast Acting Line Earthing switch (Item A(i)-4 above) No. 0 1 g High speed/Fast Acting Bus Earthing switch (Item A(iii)-5 above) No. 0 1 ii) Spares for breaker - a Trip coil with assembly Set 0 1 b Trip coil only No. 0 20 c Closing coil with assembly Set 0 1 d Closing coil only No. 0 20 e Motor for Breaker No. 0 1 f Motor for Disconnector No. 0 1 g Motor for High speed/Fast acting earthing switch No. 0 1

iii) Spares for LCC a Each type pressure switch No. 0 2 b Each type Gas density monitor No. 0 2 c Timers No. 0 2 d Each type Auxiliary Relays No. 0 5

iv) Set of 'O' rings for each module Set 0 1 v) Commissioning spares (List to be attached) Set 0 1 vi) Maintenance spares Set 0 1 vii) Special tools, tackles and spanners Set 0 1 viii) Viewing mechanism Set 0 1 ix) Spares for E O T crane a Thruster brake No. 0 1 b Brake shoe No. 0 1 c Electromagnetic brake No. 0 1 d Limit switch No. 0 1


e Each type Contactor / relays No. 0 1 E Dew point measurement meter No. 0 1 F SF6 gas leak detector No. 0 1 G Gas service cart No. 0 1 H SF6 gas purity detector No. 0 1 I Breaker timing measurement kit Set 0 1

JSupply and Erection of General purpose equipments and materials as per respective technical specifications and relevant special conditions.

1a Providing and maintaining Positive pressure of 0.5 kg/cmsq in GIS control room complete with equipments, controling and measuring instruments with maintaining required humidity level suitable for GIS equipment in line with relevant standards and practice.

Set 1 1

1b Providing and fixing of 1.5 T split Air conditioning machine in SCADA room as per specification

Set 1 1

2 Distribution transformer 11/ 0.415 kV, 100 kVA, with DP structure with DO fuse, 9 kV LA, suitable Dist box, etc. Set 2 2

3 Providing major spares OTHER THAN INDICATED IN TECHNICAL SPECIFICATIONS as per Ann A attached herewith Set 0 1

4 Providing instruments OTHER THAN INDICATED IN TECHNICAL SPECIFICATIONS as per Ann B attached herewith Set 0 1

5 Providing tools and tackles etc. OTHER THAN INDICATED IN TECHNICAL SPECIFICATIONS as per Ann C attached herewith Set 0 1

6 Supply and Erection of Fire stand with 4 buckets including concreting as per Instruction of E. I. C. Set 2 2

7 Providing of rubber Matting ( size 3'x3'x20mm) in control room No. 0 40

8 Supply and installation of ISI marked fire extinguishers of various types required for 66 kV sub station. 1) Dry chemical powder type of 10 Kg. capacity. No. 0 2

2) Dry chemical powder type of 25 Kg. capacity. No. 0 1

3) Dry chemical powder type of 50 Kg. capacity. No. 0 1 4) Carbon dioxide ( CO2) gas type of capacity 6.5 Kg. capacity No. 0 2 5) Carbon dioxide (CO2) gas type of capacity 22.5 Kg. capacity No. 0 1 6) Mechanical Foam type of capacity 9 LT. No. 0 2 7) Mechanical Foam type of capacity 50 LT. No. 0 1

10 Galvanised steel structures suitable for 30 Mtr VHF mast as per drawing and BOM - steel part ( Design will be in the scope of bidder) MT 1.75 1.65

11 -DO- but Bolt Nut part MT 0 0.1 C Gas filling and Evacuating Plant/Gas reclaimer for 66 kV GIS unit.

(Item indicated at cl. No. 1.17 of specification) SET 0 1

D SPARES

KSupply and installation of materials for Illumination system in all respect as per respective specifications and special conditions (Sucessful bidder has to submit the complete design and BOQ for approval)


1

Providing & Fixing of Energy Efficient Indoor decorative luminaries in all the rooms of control room building complete (ref. Ann-4 Item (A)) as per technical spec Cl No. 2.10.4.8 (EEI type ) as per design with respect to required lux level and relevant tender drgs. with required industrial grade point wiring as per technical spec. Scope also includes providing and fixing of 15/5 A plug, Portable Emergency Light, Bell, Fan, Ex- Fan, DC Point, with requisite MCBs and DC 100W lamp , DC Plug as per Ann-4 Item (A) in following rooms

GIS Control Room Package LS 1 11 kV Control Room Package LS 1 Office Package LS 1

2

Providing & Fixing of Energy Efficient Indoor luminaries in all the rooms, passages of control room building complete (ref. Ann-4 item (A)) as per technical spec Cl No. 2.10.4.8 (CFL type ) as per design with respect to required lux level and relevant tender drgs. with required industrial grade point wiring as per technical spec. Scope also includes providing and fixing of 15/5 A plug, Portable Emergency Light, Bell, Fan, Ex- Fan, DC Point, with requisite MCBs and DC 100W lamp,DC Plug as per Ann-4 Item (A) in following rooms,passages etc.

a Battery Room Package LS 1 b LV / Charger Room Package LS 1 c Store Room Package LS 1 d Ramp (GIS) Package LS 1 e SCADA room Package LS 1 f Toilet Package LS 1 g Passage (Corridor) Package LS 1 h Ramp (11 kV C R) Package LS 1 i Varanda Package LS 1 g Celler Package LS 1 h Security Cabin Package LS 1

3

Providing and fixing of flood light luminaries as per design for 66 kV switch yard area with T-5 tube or equivalent type Dom containing Philips/CGL/Bajaj/GE/Oshram make energy efficient type suitable wattage lamp ( 120/96/70 W) with control gear box & ancillaries and suitable for mounting on structure at appropriate height ( as per design) as per specifications TS illuminations cl. no 2.10.4.8 (EEO1) with necessary GI fabrication & GI bolt nuts to fix control gear box at the structure with complete internal and external wiring to J. box ,Dist panel/section feeder pillar etc with supply of required 2 c x 2.5 mm2 copper armoured cable (as per spec ) .The scope includes supply and erection of all the materials required for satisfactory functioning of above work.

Package LS 1

4

Providing and installation of post top lantern for main gate and 6.0 mtr road from main gate to control room as per design with Philips/CGL/Bajaj/GE/Oshram make and energy efficient type suitable wattage lamp with control gear box & ancillaries suitable for mounting on Gate pillars and 4.5 mtr poles with necessary GI fabrication & GI bolt nuts to fix control gear box with complete internal and external wiring to J.box,Dist panel/section feeder pillar, fixing terminal etc. with supply of required 2 c x 2.5 mm2 copper armoured cable as per spec .This also includes the supply and erection of required 4.5 mtr poles and its foundation work as per spec. The scope includes supply and erection of all the materials required for satisfactory functioning of above work.

Package LS 1

5

Providing and fixing of street light luminaries for reamaing area of switch yard complete as per design with Philips/CGL/Bajaj/GE/Oshram make and energy efficient type 70 W (or suitable wattage )lamp with control gear box & ancillaries suitable for mounting on 7.0 mtr poles as per

Package LS 1


spec.TS illuminations cl. no 2.10.4.8 (EEO2) at appropriate height with necessary GI fabrication & GI bolt nuts to fix control gear box with complete internal and external wiring to J. box ,dist panel/section feeder pillar, fixing terminal etc with supply of required 2 c x 2.5 mm2 copper armoured cable (as per spec). This also includes the supply and erection of 7.0 mtr pole and foundation work as per spec .

6Supply and Erection of main lighting Panel ACP-1 as per Specifications. Set comprises minimum 2 nos.of such panels qty may be more if required as per design.

Set 1 1

7Supply and Erection of main lighting Panel ACP-2 as per Specifications Set comprises minimum 4 nos.of such panels qty may be more if required as per design.

Set 1 1


Set 1 1


Set 1 1

10 Supply and Erection of main Yard light Dist. Board as per designed capacity ratings. Nos 2 2

11

Providing earthing to all tubular pole, main yard light DB,section Dist panels/boxes, Junction boxes etc.as per standards with coil type earthing using 10 SWG Copper wire in separately prepared earth pit of 1.5 Mtr depth by using salt/coke (charcoal) 16 Kgs Each & Remaining filling with BC soil & required clamping the earth wire. OR alternatively providing and fixing of earth electrode (CPRI tested with 20kA 1sec rating) to each above item as per approved drawing.

Package LS 1

12 Providing of concreting in 1:2:4 mix including muffing for erection of pole & Dist boxes panels including excavation of HR/SR as per approved drawing.

Package LS 1

LSupply and installation of materials for Earthing system in all respect as per respective specifications and special conditions for GIS, 66 kV outdoor switch yard, 11 kV control room (Sucessful bidder has to submit the complete design and BOQ for approval)

1

Supply and Installation of earthing strips/round bars as shown below including digging of 600 mm depth and 450 mm wide trench fixing on structure as per std equipment earthing phylosophy incuding fixing arrangement with two bolt arrangement, jointing, welding etc. complete.

a) 50x 6 mm GI strip. RMt. 2000 2000 b) 25 mm dia steel rod RMt. 1000 1000 c) 25mm dia 3 mtr long steel rod Nos. 55 55

2 Providing and installing Check pit as per drawing and instruction of Engineer In charge with provision of earth chamber. Nos. 2 2

3

Installation of treated pipe electrode providing 100 mm inner diameter CI pipe of 13 mm thickness and 3000 mm length as per GETCO drg No P011. Work includes fabrication and fixing of GI strips for earthing connection

Nos. 15 15

4 Providing BB masonary inspection chamber (man hole) incl. light type CI cover as per GETCO drawing no P011 Nos. 15 15

Note: Extra earth should be removed away from the site s/s premises or refilling earthing pits if required. All required materails for this job such as GI/CI pipe, CI cover with frame, salt, cement, sand, charcoal/bentonite, gravel, bricks etc. to be supplied by the contractor.


M Supply and Erection of 11 KV, Indoor VCB Panel Board consisting following panels with Bay Control & Protection Relays ( Control Voltage - 110V DC ) as per respective technical specifications and relevant special conditions and suitable for single bus on 11 KV side.

1 11 KV, 1600A, Indoor, Transformer (Incomer) VCB Panel No. 2 2 2 11 KV, 1600A, Indoor, Bus Coupler VCB Panel No. 1 1 3 11 KV, 1250A, Indoor, Feeder (Outgoing) VCB Panel No. 12 12 N Supply and Erection of General purpose equipments and materials

as per respective technical specifications and relevant special conditions and suitable for two Main Bus system on 66kV side & single bus on 11 KV side .

1 Battery set-110 V, 250AH Plante type lead acid with FRP stand of adequate size

No. 1 1

2 Battery Charger (SCADA compatible) - 110 V 30/50Amp No. 1 1 3 LTPB (SCADA compatible) No. 1 1 O Supply and Erection of SCADA equipments and materials as per

respective technical specifications and relevant special conditions and suitable for two Main Bus system on 66kV side.

LS 1 1

1 Bay Control Unit / RTU for Substation Auxiliary system . BCU shall have sufficient I/Os as per list otherwise RTU shall be provided.

Nos. 1 1

2 HMI Server computer with required softwares Nos. 2 2 3 DR work station PC No. 1 1 4 Gate way for remote control with software No. 1 1 5 SCADA software No. 1 1 6 Laser Jet Printer No. 1 1 7 Laser Jet colour Printer Nos. 1 1 8 3 kVA UPS with Battery (12 V, 26 Ah, 30 nos of cell) Nos. 1 1 9 Ethernet fiber switch* No. 4 4

*Ethernet switches shall have as many spare ports as utilized ports. 10 GPS based Time Synchronizing Equipment (IEC 61850 compatible) No. 1 1 P Supply and installation of materials/item for Power Cable and

control Cable wiring as per approved wiring schedule.

1 Supply and Laying of 1.1 kV FRLS armourd copper control cable in trench including binding/clamping of cable with GI wire or schedule as per requirement including supply and fixing of identification tags on both ends and at distance of every 100mt

1) 2c x 2.5 mm², copper control cable Mtr 1400 1400 2) 2c x 4 mm², copper control cable Mtr 200 200 3) 4cx2.5 mm², copper control cable Mtr 300 300 4) 4c x 4 mm² copper control cable Mtr 1800 1800 5) 7c x 2.5 mm², copper control cable Mtr 0 06) 12c x 2.5 mm², copper control cable Mtr 500 500 7) 12c x 4 mm², copper control cable Mtr 0 08) 19c x 2.5 mm² copper control cable Mtr 500 500 9) 27c x 2.5 mm² copper control cable Mtr 1100 1100 10A) 1C x 50 mm² copper cable Mtr 150 150 10B) 4C x 10 mm² copper control cable Mtr 100 100 11) 3.5 x 10 mm2 Al. armoured LT cable Mtr 0 012) 3.5 x 25 mm² Al. armoured LT cable Mtr 150 150 13) 3.5 x 50 mm² Al. armoured LT cable Mtr 0 014) 3.5 x 120 mm² Al. armoured LT cable Mtr 150 150 15) 1C x 150 mm² Al. armoured LT cable Mtr 0 016) 3.5 x 300 mm² Al. armoured LT cable Mtr 0 0


17) 66 KV 630 mm², single core, aluminum conductor, XLPE Power cable with end termination kit

Mtr 350 350

18) 11KV 240 mm², aluminum conductor, XLPE Power cable with end termination kit

Mtr 600 600

19) 11KV 185 mm², aluminum conductor, XLPE Power cable with end termination kit

Mtr 400 400

2 Termination of the control cable at panel / MK box/equipment including PVC binding dressing/shaping drilling of holes in panels for glands nuts for following size. The work also includes Looping in panel and MK box with using crimping type of lugs of suitable size with ferruling with proper size of copper cable wire. The loops should be bunched with using button tape and proper shaping etc.

1) cables from 2 core to 7 core of 2.5 & 4.0 sq.mm size No 125 125 2) cables above 7 core No 100 100

Q OTHER ITEMS 1 EOT crane 3.5 T No 1 1 2 42” Sony make flat LCD TV as per specification No 1 1


: A N N E X U R E - "A" : Major spares and devices

Sr. No.

Particulars Quantity

(A) 66/11 KV Tranformer 1 Bushing - HV, LV & Neutral (each) 1 No.

(B) DG set ( portable three phase 415V 10 KVA Honda make) 1 set

: A N N E X U R E - "B" : Instruments & equipments

1 Computer set with UPS dust cover etc as per technical specifications ( for officer in charge)

1 set

2 A-4 size mono lasor printer as per technical specifications.( for officer In charge)

1 set

3 Earth Resistance Tester Digital GE-OHM C make (made in Germany) model no EN 61557/VDE 0413 or updated version with better features.

1 No

4 Insulation tester 5 kv - Motorised with all accessories and test proble of 15 mtr length. "Megger" make model S1-5010.

1 No

5 Clip on meter AC/DC V/I/OHM - 0-1000V, 0-25A Meco/Rishabh/Motwane Battery backup

1 No

6 Motor and manual Operated Oil BDV testing Kit –Motwanemake with 0-100kV range, auto cut off feature, with standard ball -cup and measuring gauge as per IS.

1 No

7 LCD projector along with White screen as per specification 1 No

: A N N E X U R E - "C" : : Tools & Tackles :

1 Earthing Rod (Highly insulated FRP telescopic Earthing/ Discharge Rod. Suitable for 66 kV) with cable.

6

2 Spanner [Ring, Fixed, Box] Fix=10x11,12x13,25x15,,16x17Ring=10x11,12x13,25x15,16x17 Tubular=12x13,25x15,16x17,18x19 Screw driver=827I,927 Nut driver= 7mm

3 sets

3 Chain pulley block - 5 tonne capacity 1 4 Wire rope pully - 02 Tonne 2 Nos. 5 Aluminium Ladder - 15 ft.

Aluminium folding factory ladder (Heavy duty) made from high tensile aluminium alloy design no 152 AFFL 15 Ft height (4.56 mtrs) specification section= 15/8” X 1.1/4” Steps= 15/8 X 1.1/4 12”Center to Center

2

6 Telescopic aluminium ladder(3 sections) with platform - 15 ft 1


7 Hot air blower Small Capacity =1.5 m3/min, Big Capacity =2.0m3/min

1 no each

8 Industrial Vacumme cleaner - Tornedo/Ureka Forbes 1 9 Wooden sleeper - Pine wood sleeper of size 10”X5”X10 feet long 50

SAFETY TOOLS 1 Safety belt

Full body covering and Half body covering 5

2 Halmet with ISI mark of repute make 5 3 Hand Gloves

Hand gloves of quality as per Is certification 4770 & test potential 7500Volt

4 pair

4 Gum boot (Pair) - Size 8,9,10. - Standard make 3 pair for size each

Illumination Luminaries 1 Energy efficient decorativeTube (spare as provided in cotrol room

illumination design) 5 Nos

Energy Efficient tube (spare as provided in switch yard illumination design)

5 Nos

2 CFL (spare as provided in illumination design) 5 Nos Display Boards and others

1 Single line diagram drawn with radium paint suitable decorated on a board of approx size of 120x90 mmsuitable designed thickness with fixing arrangement in control room wall.

1 set

2 Key board with hook for differeint keys of each equipments/panels/cubicles with SLD drawn with color approx size 2'x2'

1 set


Annexure - 5 Details of Illumniation for Switch yard

Sr. No. Location Details

1 66kV switch Yard a Height of transformer, in mtr 5

b Equipments Height from Ground 4.0 Mtr+0.3 Mtr

plinth

2Lux level Required for main Equipments Height 50

3 Lux level rquired for Other area 20

4Lux level required for follwing amminities

5 Parking Area Lux level 20

6Main Roads ( Post Top Lantern) Lux level 20

7Fencing Light and Spare Area ( Street Light) Lux level 20

The area if not applicable as per layout of the project may please be ignored.


Annexure - 4

Sr.No. Location

AvgIllumination

levelRequired in

LUX

AC1.5 TSplit

15 APlug

5 APlug Fan Ex

FanDC

PointDC

PlugPortable

EmergencyLighting

Bell

3ph.wtihneutral15Atestplug

A Control Room

1GIS ControlRoom 300 0 4 3 2 0 2 1 1 1 1

2 SCADA room 300 1 3 2 1 0 2 1 1 0 1

311 KV controlroom 300 0 3 3 2 0 2 1 1 1 1

4 Battery Room 100 0 0 3 2 2 1 0 0 0 0

5LV / ChargerRoom 150 0 2 2 2 0 1 0 1 0 1

6 Celler 300 0 4 3 0 2 0 0 0 2 17 Ramp for GIS 100 0 1 1 0 0 0 0 0 0 08 Varanda * 70 0 0 2 0 0 0 0 0 0 09 Office 300 1 2 2 1 0 0 0 0 2 0

10 Toilet Block 70 0 0 1 0 1 0 0 0 0 0

11Passage(Corridor) 70 0 0 2 0 0 0 0 1 0 0

12Ramp for 11 kVCR 100 0 1 1 0 0 0 0 0 0 0

13 Security cabin 300 0 1 1 1 0 0 0 1 1 0

NOTE: Control room out skirt area/porch shall be provided with suitable water tight bulk head fittings as per design.


CIVIL SCHEDULE FOR 66 KV GIS Name of work : Engineering, manufacturing, supply, erection, testing & commissioning of 66 kV GIS equipments, materials on turn key basis including all civil works at 66kVLal Bunglow S/S, Jamnagar.

SR NO PARTICULARS OF ITEM UNIT QTY

Design, construction and supply of all required materials for following items as per relevant standards, technical specifications,special conditions and tender drawings. Bidder shall submit the required design calculation, drawing for execution for approval from GETCO.

1GIS HOUSING complete WITH CABLE CELLAR including foundations for GIS and its all related required items,ramp with platform, stair case etc(BASEMENT+GF+MF+FF) including water supply, drainage as per latest relevant standards. .Payment will be released progressively on achieving mile stones such as excavation, plinth level, lintel level, slab level, flooring+ plastering +doors+ windows+ ventilators, false ceiling, water supply+ drainage, electrification & painting etc. (Note: GIS housing as per tender drawing is given alongwith tender to spell out requirements and enable bidders to quote.However, it is important that bidder shall study and include full requirements- functional,operational & mainenance, safely and grid code etc which are essential and necessary for building and installing 66kv GIS as per standards in their bid.)

LUMPSUMP PACKAGE

2 Providing & laying FOUNDATION of grade M-20 for exposed work including the cost of necessary formwork, shuttering, scaffolding, watering, pouring & compacting with machine vibrator, curing after tie with jute bags on r.c.c surface,centering & shuttering in true line and level etc.Including cost of reinforcement.

A FOR LA & BPI NO 18B FOR TRANSFORMER INCLUDING RADIATORBANK AND

OTHER FOUNDATIONS AND ITS MARSHALLING WORK AND ITS TRACK UPTO ROAD

NO 3

C FOR DP STRUCTURE NO 12D FOR 11KV SIDE CONNECTION ARRANGEMENT FOR 66-11KV

TR. NO 6

E FOR STATION TRANSFORMER WITH DP STRUCTURE NO 1F FOR VHF MAST(LIGHTENING MAST) NO 1


3RCC CABLE TRENCHES with racks and tray in all respect as

per latest relevant standards..Payment shall be made on RMT basis cable trench of different sizes.

A CABLE TRENCH FOR 66KV POWER CABLE RMT 55

B CABLTRENCH FOR 11 KV POWER CABLE RMT 122

CCABLE TRENCH FOR CONTROL CABLE

RMT 45

4 TRANSFORMER OIL SUMP 20000 LITRE CAP WITH PIPING AND OTHER REQUIRED ARRANGEMENT as per latest relevant STANDARDS.

LUMPSUMP 1

5 FIRE PROTECTION WALL as per Tender drawing in all respect with latest relavant STANDARDS & as per requirement of transformer safety.

NO 2

6 RCCRoads supprted by WBM road, C.D Works, Paving & Storm water Drains in all respect as per latest relevant STANDARDS.

A RCC ROAD- 5.0 METER WIDE RMT 77 B STORM WATER DRAIN RMT 77 C CROSS DRAINAGE WORK NO 5 7

Bore well System including submersible pump & piping up to OHT / UG sump. RMT is considered for quoting rates whole work shall be carried out as per requirement of Geo Physical investigation reprt.The rates also includes cost of Geo physical Investigations from govt. approved laboratory for availability of water & execute bore well work. However location of bore shall be finalized in consultation with GETCO.

A

BORE WELL System including casing pipe of 200mm dia MSpipe HAVING THICKNESS 5.20MM of required length and with supporting clamp of required size and all other accessories required for completion of work to the entire satisfactory operation & maintenance.

RMT 200

B

SUBMERSIBLE PUMP OF DESIGN CAPACITY with column pipe of 50mm dia MEDIUM GRADE GI pipe of approved quality of required length (FOR HEAD OF BORED DEPTH PLUS OVERHEAD TANK) WITH ALL REQUIRED NECESSARY ELECTRICAL INSTALLATIONS

NO 1

8 Water Supply System (U/G + OH tank) A RCC OVERHEAD TANK(3.0 X 3.0 METER) NO 1 B RCC UNDER GROUND TANK(3.0 X 3.0 METER) NO 1 C PIPING REQD FOR ABOVE WORK OF VARYING DIAMETER

i GI 'B' CLASS MEDIUM GRADE PIPE OF REQUIRED SIZE FOR SUCTION

RMT 80


II GI 'B' CLASS MEDIUM GRADE PIPE OF REQUIRED SIZE FOR DICHARGE

RMT 80

9 Chain link Fencing PANEL WITH ANGLE POST with Gate in all respect as per latest relevant STANDARD. RMT 51

10 Septic Tank with Soak Pit and drainage system including inspection chamber..

A SEPTIC TANK NO 1 B SOAK PIT NO 1 C DRAINAGE LINE RMT 80

11 Providing anti weed treatment as per standard practice of public utility.

SMT 900

12 Laying of 20-30mm size metal /gravel with 100mm thick layer in switch yard.

SMT 900

13 Security Cabin(Approx. size shall be 3.0 x 3.0 meter) with toilet block in all respect with latest relevant STANDARDS.

NO 1

25 Tree Plantation in the sub station to the entire satisfaction of GETCO. This item includes Providing plantation and development of plants/trees/flowers,ornamental plants,Lawns(Dub grass) and garden shrubs,small trees of plants of selected & approval name, quality,size and growth in good condition. The work including cost of plants,materials,digging pit in the soil of size 0.60 x 0.60 meter . Soil for planting trees,mixing of manure and refilling the pit wit good earth ,watering as and when required.Providing pestisides/fertilizer with maintenance upto commission of sub station, labours,tools, and tackles,transportation,loading, unloading etc complete.(approx. 50 trees/plants & loan of 30 Sq.meter)

LUMPSUMP 1

15 Vehicle parking sheds(Approx. size shall be 6.0 x 3.0 meter) as per Tender drawing in all respect with latest relevant STANDARDS.

NO 1

16 Rain water harvesting system in all respect as per latest relevant STANDARDS.

LUMPSUMP 1


17 Providing Godrej or equivalent office furniture preferably modular type required looking to the functionality for 66kv GIS(basement + GF), 11kv control room(MF+FF)..Package includes interior design of 66kv GIS and 11kv control room building. This package includes supply of High neck chair of Godrej PCH9101R or equivalent, Revolving chair Godrej PCH7042 R or equivalent make, Revolving chairPCH 7001 R of Godrej make or equivalent, Modular work stations of Godrej make or equivalent 5 x 5 Panta works surface with pedestal CPU trolly & key board tray or equivalent, office table with SDU & pedestal 5026/3619 Godrej or equivalent + B124, Sofa set 3 + 2 Godrej or equivalent make,Cup board with sealing,Cup board for storage of records etc as approved by competent authority of GETCO.)(Sofa set(3+2)- 01 no, Big stool-03 nos,small stool-03 nos,copu.table-03 nos,office table-01 nos,Revolving chair-06,steel rack-07 nos,Allumimum ladder(4.0 mtr ht.)-02 nos, Steel cup board(Big Size)-04 nos.)

LUMPSUMP 1

18 Supply and installation of Reverse osmosis purification system having flow rate of 15 litres per hour to attached to water cooler , with inbuilt level monitoring system,auto start ,auto flash every hour, auto shut off system having six stage purification arrangement with one year warranty of approved quality & make +B137 against manufacturing defects, free service every quarter for one year( i.e. Four free service), giving performance gurantee for one year, input voltage 190-250V AC, 2 nos of TFC membrane 100GPD ,recovery rate 50% & 90 % TDS reduction. Each unit shall have words" property in prominent manner. The unit shall be fixed in aesthetic looking laminated board mounted on aesthetic looking brackets.Any additional accessories, if required shall be supplied and fixed by the bidder at his cost.

LUMPSUMP 1

19 Providing and installing SHRIRAM USHA or equivalent make water cooler of 40 ltr/hr capacity, suitable to operate on 230 V + 10% 50 Hz,single phase AC supply with hermatically sealed type sunction cooled compressor with overload protection confirming to IS 10617(part-i) with amdt. 1 & 2. Item rate includes all charges including necessary piping of approved make and quality upto designated water supply point. Supply and installation of WATER COOLER of designed capacity including necessary electrification required for entire satisfactory operation.

LUMPSUMP 1

price bid iv 66kv gis office...sign & seal of bidder 3 summary name of work : engineering,...

Documents