You will find your local partner at: www.boschpackagingservices.com

Preventive Maintenance Kits for Linium, Stratus and Pack201 wrappers 10/2010 | PAUR/MKT | Bosch Packaging Services (subject to alterations)

Preventive Maintenance made easy:PM Kits for Linium, Stratus and Pack 201 wrappers

We have all been there: An entire packaging line is down for an hour because a small bearing deep inside a machine has failed just as an urgent shipment is scheduled to leave for the distribution center. This would not have happened, had the bearing been replaced during a scheduled downtime the previous weekend.

Preventive Maintenance has long been instituted in manufacturing plants around the world, but it comes with its own challenges. Which parts do you replace? How often do they need to be replaced?

This is where our PM Kits come in. Bosch has drawn on its experience from seeing equipment in many different plants and circumstances, and has compiled a kit with parts that should be replaced at certain intervals. This takes the guesswork out of preventive maintenance, and eliminates time consuming ordering of individual small parts.

Your Benefits

Preventive Maintenance without the guesswork. Know which parts to replace at which interval.

Minimize maintenance downtime by following a methodical, planned approach.

Typically 5% discount on kit orders compared to individual parts.

Minimize unplanned downtime with scheduled preventive maintenance

Standard approach, customized solutionWhen an order is received, Bosch begins its review by comparing the standard list of parts for each machine type with the original bill of material of the specific machine being serviced. This ensures an efficient and standardized solution that is tailored to your needs.

PricingOn all standard PM Kits, Bosch is granting a discount of typically 5% off the price of individual parts.

You will find your local partner at: www.boschpackagingservices.com

Preventive Maintenance Kits for Linium, Stratus and Pack201 wrappers 10/2010 | PAUR/MKT | Bosch Packaging Services (subject to alterations)

Preventive Maintenance made easy:PM Kits for Linium, Stratus and Pack 201 wrappers

Figure 1 — Sample contents of a PM Kit (Minor PM Kit for Stratus with double finwheels shown)

Minor PM Kits Part number* Recommended frequency**

Minor PM Kit for Stratus (single finwheel) N/A (order by kit name) every 2000 hours

Minor PM Kit for Stratus (double finwheels) N/A (order by kit name) every 2000 hours

List of individual PM KitsUse the table provided below to reference the specific PM Kit for your machine.

* Please have machine type and serial number available when ordering.

** Assumes typical use. Depending on product type, environmental conditions, etc., the required interval may be longer or shorter.

Major PM Kits Part number* Recommended frequency**

Major PM Kit for Linium 301/311 N/A (order by kit name) every 10,000 hours

Major PM Kit for Linium 303/313 N/A (order by kit name) every 10,000 hours

Major PM Kit for Linium 303/313 Cutting Head N/A (order by kit name) every 10,000 hours

Major PM Kit for Stratus (single finwheels) N/A (order by kit name) every 10,000 hours

Major PM Kit for Stratus (double finwheels) N/A (order by kit name) every 10,000 hours