PRESSURE SWITCHES FOR WATER PUMPS

PM-PT PM/5-3W PT/5-3W LP/3

TYPE PRESSURERANGE

RATEDCURRENT

DIF. MIN/DIF. MAX

PM/5 1-5 bar 250V 16(10A) 0,6 / 2,3 bar

PM/6 1,5-5,5 bar 250V 16(10A) 0,8 / 2,2 bar

PM/12 3-12 bar 250V 16(10A) 1,5 / 5 bar

PT/5 1-5 bar 500V 16(10A) 0,6 / 2,3 bar

PT/6 1,5-5,5 bar 500V 16(10A) 0,8/ 2,2 bar

PT/12 3-12 bar 500V 16(10A) 1,5 / 5 bar

TYPE PRESSURE RANGE

RATEDCURRENT

DIFF. MIN /DIFF. MAX

PM/5-3W 1-5 bar 250V 16(10A) 0,6 / 2,3 bar

PT5-3W 1-5 bar 500V 16(10A) 0,6/2,3 bar

TYPE PRESSURERANGE

RATED CURRENT

LP/3 0,05-0,4 bar 250V 16(10A)

LP/3-18 0,5-2,0 bar 250V 16(10A)

PM= for single phase motor pumpPT = for three phase motor pump

DIF. MIN= minimum difference between cut-in and cut-outDIF. MAX= maximum difference between cut-in and cut-out

Applicazioni

PM/5-3W

INSTALLATIONS

ADVANTAGES

DIFFERENT SETTINGS AVAILABLE

SUITABLE IN VARIOUS SYSTEMS WITH DIFFERENT PUMPS

OPTIONAL GRADUATED SCALE

MORE SAFETY

REVOLVING NUT

QUICK CONNECTIONTEAR-RESISTANT CABLE CLAMPS

MORE SAFETY

FULLY INSULATED TERMINALS

PROTECTION DEGREE IP54

CONTACTS 20 A ON/OFF BUTTON

GRADUATED SCALE

EXTERNALLY VISIBLE CUT-IN PRESSURE

ELECTRONIC FLOW AND PRESSURE CONTROLLERS

BRIO 2000-MBRIO TANK BRIO TOP

CONTROLLER

Power supply 115-230V 50-60Hz

Max rated current 12A

Starting pressure range

1 - 3,5 bar

Protection degree IP 65

Max pressure 10 bar

CONTROLLER WITH INTEGRATED PRESSURE TANK

Power supply 230V 50-60Hz

Max rated current 12A

Starting pressure range

1 - 3,5 bar

Protection degree IP 65

Max pressure 10 bar

DIGITAL CONTROLLER

Power supply 230V 50-60Hz

Max rated current 16A

Starting pressure range

0,5 - 8 bar

Protection degree IP 65

Max pressure 10 bar

VERTICAL AND HORIZONTAL INSTALLATION BY-PASS INSTALLATION FOR HOSES BIGGER THAN 1"

INSTALLATION WITH THREE-PHASE MOTOR WITH RELAY

APPLICATIONS

IRRIGATION DOMESTIC WATER SYSTEMS

INDUSTRIALRESIDENTIAL

BRIO TOPLCD DISPLAY– 5 LANGUAGES

DIGITAL DISPLAY OF PRESSURE AND CURRENT

EASY SETTING OF PARAMETERS

CURRENT CONTROL

IT PROTECTS THE PUMP AGAINST OVERLOAD

MAX RATED 16A

SUITABLE FOR SURFACE PUMPS, SUBMERSIBLE PUMPS, VERTICAL PUMPS UP TO 3HP

I/O CONNECTIONS

IT CAN BE CONNECTED TO BMS AND OTHER EQUIPMENTS FOR REMOTE CONTROL

TWIN BOOSTER SYSTEM WITH TWO BRIO TOP OR ONE BRIO TOP AND ONE SIRIO IN ALTERNATING FUNCTIONING

ERROR LOG

ERROR LOGGING FOR AN EASIER AND COMPLETE TROUBLESHOOTING

STOP DELAYED ADJUSTABLE UP TO 120 SECONDS

PERFECT FOR DEEP WELL SUMBERSIBLE PUMPS

WHY CHOOSE BRIO TOP?

MODE P+F

PUMP STARTS ON PRESSURE DROP AND STOPS ON ZERO FLOW

MAXIMUM PRESSURE CANNOT BE ADJUSTED.

NO NEED OF PRESSURE TANK

MODE P+P

PUMP STARTS AND STOPS ACCORDING TO PRESSURE THRESHOLD

CUT-IN AND CUT-OFF PRESSURE CAN BE REGULATED (MIN. DIFFERENTIAL 0,3 BAR)

IT MUST BE USED WITH A PRESSURE TANK, AT LEAST OF 24LT

2 PRODUCTS IN ONE!

ModeP + F

ModeP + P

WHY CHOOSE BRIO TOP?

BOOSTER SETS WITHOUT CONTROL BOX

P+P MODE

WHEN USED IN P+P MODE WITH A PRESSURE TANK, 2 DEVICES CAN BE INTERCONNECTED TO GET A BOOSTER SET

PUMPS START IN SWAPPED MODE ON WATER DEMAND

PUMPS CAN RUN TOGETHER IN CASE OF HIGH WATER REQUEST FROM THE USERS

JUST A 4 WIRE CABLE IS NEEDED FOR INTERCONNECTION

WHY CHOOSE BRIO TOP?

POSSIBLE CONNECTION WITH OTHER DEVICES

AUXILIARY I/O

INPUT CAN BE USED TO CONNECT A FLOAT SWITCH OR A TIMER

IT CAN BE REMOTELY OPERATED FROM ANOTHER DEVICE (PLC, COMPUTER WITH «CAFM», ETC.)

OUTPUT RELAY CAN SIGNAL ERROR CONDITIONS OR CAN BE USED TO START OTHER EQUIPMENT (UV UNITS, CHLORINE PUMPS, ETC.)

IT CAN BE USED TO INTERFACE THE PUMP TO BMS (BUILDING MANAGEMENT SYSTEMS)

PROTECTIONS

OVER CURRENT

IT STOPS THE PUMP WHEN THE CURRENT OVERCOMES THE MAXIMUM PROGRAMMED VALUE (LOCKED ROTOR)

OVER PRESSURE

IT STOPS THE PUMP WHEN THE PRESSURE OVERCOMES THE MAXIMUM PROGRAMMED VALUE (USEFUL FOR APPLICATIONS WITH VARIABLE SUCTION DEPTH)

ICE PROTECTION

IF THE PRESSURE FALLS BELOW 4°C,PUMP STARTS AUTOMATICALLY FOR 15” EVERY 15 MINUTES TO PREVENT FREEZING OF WATER INSIDE THE IMPELLERS

ANTI-SEIZE FUNCTION

WHEN THE PUMP IS NOT USED FOR A PERIOD LONGER THAN 24H, BRIO TOP WILL START THE MOTOR AUTOMATICALLY TO PREVENT ROTOR SEIZURE

WHY CHOOSE BRIO TOP?

PLASTIC FITTINGSFOR AN EASIER AND QUICK INSTALLATION

CURVAMG RC1M/G

• Ideal for the installation of all our electronic devices with 1inch connection

• They replace the traditional connections in brass or cast iron• Revolving nut with joint• Ideal for by-pass connection when the hose is bigger than 1inch

INVERTERVARIABLE FREQUENCY DRIVES

SIRIO SIRIO ENTRY – ENTRY XP NETTUNO UNIVERSAL

1-PH 230V INPUT / 3-PH 230V OUTPUT

FOR 3-PHASE PUMPSDELTA CONNECTIONOUTPUT MAX. 9,7A

WATER COOLINGPIPE MOUNTING

1-PH 230V INPUT / 1-PH 230V OUTPUT

FOR 1-PHASE PUMPS WITH CAPACITOROUTPUT MAX 10,5 A - SIRIO ENTRYOUTPUT MAX 14 A – SIRIO ENTRY XP

WATER COOLINGPIPE MOUNTING

1-PH 230 V INPUT1-PH 230V 10,5A / 3-PH 230V 9,7 AOUTPUT SELECTABLE BY SOFTWARE

AIR COOLINGWALL OR PIPE MOUNTING

3-PH 400V INPUT / 3-PH 400V OUTPUT MAX 13 AOUTPUT MAX 9 AOUTPUT MAX 6 A

AIR COOLING WALL OR PIPE MOUNTING

NETTUNO

SIRIO & SIRIO ENTRY

COMPACT DESIGN

IT CAN BE INSTALLED IN VERTICAL OR HORIZONTAL POSITION

DISPLAY LCD – 8 LANGUAGES

DIGITAL DISPLAY OF PRESSURE AND CURRENT

EASY SETTING OF THE PARAMETERS

ERROR LOG

INTEGRATED FLOW AND PRESSURE SENSORS

NO NEED OF EXTERNAL SENSOR

CHECK VALVE WITH INTEGRATED FLOW SENSOR

WATER COOLING

LONG LIFE OF POWER ELECTRONIC CIRCUITS

BIG HEAT DISSIPITION PLATE

HIGH POWER RATINGS IN A SMALL DESIGN

VARIABLE MOTOR SPEED

CONSTANT PRESSURE ENERGY SAVING

SOFT-START

GRADUAL START AND STOP OF THE PUMP

DISPLAY SIRIO 2.0

3.0 BAR 40 Hz

V= 230VI= 6.0A

Tm=45°CTa=45°C

LanguageEN

- ALL FUNCTIONING VARIABLES AVAILABLE ON THE LCD

(PRESSURE, VOLTAGE, CURRENT, TEMPERATURE)

- END USER CAN CHANGE THE LANGUAGE ONLY (TO

PREVENT UNAUTHORIZED VARIATION OF PARAMETERS)

ADVANCED USE OF SIRIO 2.0IMPROVED I/O

OPTIONAL I/O CARD:1 DIGITAL INPUT FOR EXTERNAL START, EXTERNAL ERROR OF DOUBLE SET-POINT

1 DIGITAL OUTPUT FOR “ERROR” SIGNALING, “PUMP IN FUNCTION” SIGNALING OR FOR AUXILIARY FIXED SPEED PUMP

STANDARD AUX. CONNECTOR- IT ALLOWS THE CONNECTION OF 2 SIRIO IN A BOOSTER SET- IT CAN BE USED FOR EXTERNAL START OR DOUBLE SET-POINT

COMMAND

I/O input‘2’

I/O outputERR.

Con. Aus.1 <->

ADVANCED USE OF SIRIO 2.0USE WITH DIRTY WATER

- FLOW SENSOR CAN BE DISABLED

- SIRIO CAN BE OPERATED ACCORDING TO THE PRESSURE ONLY

- USEFUL FOR APPLICATION WITH SAND AND IRON

- DRY RUNNING PRESSURE MUST BE SET TO CORRECTLY STOP THE PUMP IN ABSENCE OF WATER

Flow sens.OFF

Dry ru.Press0,5 BAR

INVERTER

INPUT OUTPUT

NETTUNO 3P 13A 3X400V 3X400V – 13A max.

NETTUNO 3P 9A 3X400V 3X400V – 9A max.

NETTUNO 3P 6A 3X400V 3X400V – 6A max.

NETTUNO

INPUT OUTPUT

NETTUNOUNIVERSAL

1X230V 1X230V – 10,5A max.

3X230V – 9,7A max.(SELECTABLE)

NETTUNO UNIVERSAL

NETTUNO

WALL MOUNTING(fixing bracket standard provided)

PIPE MOUNTING(Kit of fixing collars by request)

NETTUNO and NETTUNO UNIVERSAL

ANALOG INPUTS

4-20mA (PRESSURE SENSOR)0-10V (AUXILIARY)

RS 485

BOOSTER SET UP TO 8 PUMPS.ONLY ONE PRESSURE TRANSDUCER CAN BE CONNECTED TO ANY INVERTER

2 x OUTPUTS (ERROR, PUMP ON, DOL PUMP)

AUXILIARY SINGLE PHASE PUMP CONTROL

DIGITAL INPUTS

1X ENABLE (FLOW SWITCH, TIMER)1X ERROR1X SECONDARY SET-POINT

BIG DISPLAY

LCD 16X2EASY CONFIGURATION

DIGITAL OUTPUTS