presslink booklet
TRANSCRIPT
P
ress Console
Press
SpectroDrive 30% 40% Less Time Less Ink
Increase
press room
productivity &
do more jobs
Get to color
quickly and
stay on color
for long runs
50% Less Paper
Drastica�y
reduce the
high cost of
materials
TECHKON
CLOSE THE LOOP...REDUCE WASTE
1 2 3Ink Presetting from CIP3 Automated Scanning Closed Loop Control
INK PRESETTING FOR SHORTER MAKE-READY
PressLink Converter presets inkdensities with CIP3 prepress fileand generates on-screen proof.
Ink preset values are sent to pressautomatica�y to adjust inkfountains and reduce make ready.
AUTOMATED CONTROL FOR ON-TARGET COLOR
Operator measures sheetwith Techkon SpectroDRIVE
PressLINK software displaysdensity, G7 and color info
Ink fountains adjust to keepcolor on target during run
1
2
3
SPECTRODRIVE IS FAST, PRECISE AND FLEXIBLE
SpectoDRIVE scans 40”press sheet in 8 seconds
Control strip can beanywhere on the sheet
Spot measurements can also be made
Sends spectral and density data tosoftware
Sma� 2mm by 1.5mmaperture
Softwaredisplays inkdensity. Sendsdata to pressconsole.Automatic inkkey adjustment. Densities stayon target.Colors adhereto standards.You operateefficiently.AFTER
BEFORE
RETURN ON INVESTMENT CALCULATOR
40 min6 jobs500$95$33026050%30%
Average Make-ready Minutes per Job
Jobs per day per press (a� shifts)
Sheets used per Make-ready
Value of 1000 sheets of paper
Hourly press rate
Working days per year
Savings of Make-ready time (Savings of 20 min per job)
Savings of Make-ready materials (savings of 150 sheets)
Annual Savings $193, 830
FLEXIBLE, ECONOMICAL, CUSTOMIZABLE SOLUTIONS
PressLink
Ink presetting software and converter
Press interface
Printflow connector hardware
Scanning densitometer
Closed loop color control software
Onsite Service & Support
Warranty
Basic
2 Day
Advanced
1 Week
Premium
1+ Week
Extended
Modernize Press
Improve Color
Reduce Cost
Extends �fe and profitab�ity of old press
Adhere to standards and stay on target
Gain productivity and lower material cost
PressLINK has one of the fastest return-on-investment in the industry
CALL US FOR A CONSULTATIONTechkon USA: 978-777-1854