presented by: mukesh bhuta vice chairman - ipua stakeholder workshop on hpmp – 21 st / 22 nd...
TRANSCRIPT
Presented By: Mukesh BhutaVice Chairman - IPUA
Stakeholder Workshop on HPMP – 21st / 22nd October’ 11
IPUA’s Role:Ozone Cell, Ministry of Environment & Forest, Government of India is preparing HCFC Phase-out Management Plan (HPMP) which may be published in due course. The Indian Polyurethane Association with an endeavor to best serve the interests of the member community and the Indian Polyurethane Association has been assisting Ozone Cell in this HPMP programme.
Which is to……
Identify all the sectors of foams where HCFCs are being used
Survey the number of enterprises consuming HCFCs directly or indirectly.
Estimate the total consumption of HCFCs in India for the years 2007-2012 more importantly for 2009-2012.
Create awareness amongst the industry representatives, about the phase out scenario.
Suggest strategy which can facilitate a successful implementation of HCFCs phase out.
Recommend regulatory policies which can be industry friendly rather than restrictive.
Stakeholder Workshop on HPMP – 21st / 22nd October’ 11
India PU Foam SectorPresent scenario:Main PU Foam sectors consuming HCFCs
are:Domestic Refrigeration / AppliancesCommercial RefrigerationContinuous PanelDiscontinuous PanelGeneral Insulation Spray / In-SituThermowareIntegral SkinThermo Plastic Foam
Stakeholder Workshop on HPMP – 21st / 22nd October’ 11
Alternatives Blowing Agents:Current & Futuristic Most promising alternative technologies for Indian Foam
Sector are:CompoundCompound MWMW Physical Physical StateState
Boiling Boiling Point Point ((ooC)C)
Flash Flash PointPoint
LFL/UFLLFL/UFL LambdaLambda
2525ooC C (mW/mk)(mW/mk)
ODPODP GWPGWP
HFC-134aHFC-134a 102102 GasGas -27-27 NoneNone NoneNone 00 13001300
HFC-245faHFC-245fa 134134 LiquidLiquid 1515 NoneNone NoneNone 1313 00 820820
HFC-365mfcHFC-365mfc 148148 LiquidLiquid 4040 -24-24 3.4/133.4/13 1212 00 840840
n-Pentanen-Pentane 7272 LiquidLiquid 3636 -49-49 1.51.5 1515 00 1111
Iso-PentaneIso-Pentane 7272 LiquidLiquid 2828 -51-51 1.41.4 1414 00 1111
Cyclo-PentaneCyclo-Pentane 7070 LiquidLiquid 4949 -7-7 1.51.5 1313 00 1111
MethylalMethylal 7676 LiquidLiquid 42.342.3 -18-18 2.2/19.92.2/19.9 00 Very LowVery Low
Methyl FormateMethyl Formate 6060 LiquidLiquid 31.531.5 -19-19 5/205/20 10.710.7 00 Very LowVery Low
FEA-1100-DupontFEA-1100-Dupont NANA LiquidLiquid 3333 10.710.7 NoneNone NANA 00 Very LowVery Low
HBA-2-HoneywellHBA-2-Honeywell NANA LiquidLiquid NANA NANA NoneNone NANA NegligibleNegligible Very LowVery Low
AFA-L1-ArkemaAFA-L1-Arkema NANA LiquidLiquid NANA 1010 NoneNone NoneNone NegligibleNegligible Very LowVery Low
Stakeholder Workshop on HPMP – 21st / 22nd October’ 11
Application: Domestic, Commercial Appliance & ThemowareDomestic ApplianceKey requirements:Foam insulation
properties ( K-factor)
Fast productivity
Commercial ApplianceApplication:supermarket counters horizontal freezerVisi-coolersfood service equipment
ThermowareKey requirement:
Fast productivity
Low cost Blowing Agent Options :Zero ODP:HFC -134a low level, HFC -245 fa & HFC -134a/HFC- 365, Ecomate
Stakeholder Workshop on HPMP – 21st / 22nd October’ 11
Application: Discontinuous & Continuous Building Panels
Application
Cold storeBuilding Panel Telecom Shelter
Key requirements Low k-valueFaster Productivity FR
Blowing Agent Options :Zero ODP:HFC -134°, HFC -134a/HFC -365, HFC- 245fa, Ecomate
Stakeholder Workshop on HPMP – 21st / 22nd October’ 11
Application: General Insulation & SprayApplications include: Walls, crawl spaces, enclosed
attics, roof decksKey requirements Good Foam mechanical propertiesGood Foam insulation propertiesLow Moisture vapor resistance Low Flame spread Low Smoke generation
Blowing Agent Options :Zero ODP:HFC -134a, HFC 134a & HFC -134a/HFC- 365, HFC -245fa, Ecomate
Stakeholder Workshop on HPMP – 21st / 22nd October’ 11
Application: Integral SkinApplications:steering wheelfurniture (armrest, headrest, seat)
Key requirements:Skin formationAestheticsGood Abrasion resistance
Blowing Agent Options :Zero ODP:HFC -134a, & HFC -245fa/365, Ecomate
Stakeholder Workshop on HPMP – 21st / 22nd October’ 11
Considerations for selection of alternative technologies:
Stakeholder Workshop on HPMP – 21st / 22nd October’ 11
India PU Foam SectorPresent scenario:In India today HCFCs are being used by more than 450 units
in processing of PU Foams and other foams. This foam sectors is
dominated by large number of small and medium sized enterprises.
Stakeholder Workshop on HPMP – 21st / 22nd October’ 11
The consumption split of HCFCs across various foam sector:
2009 2010
Stakeholder Workshop on HPMP – 21st / 22nd October’ 11
IPUA Final Analysis:Total estimated consumption of HCFC (mainly 141b) is as
under:
Stakeholder Workshop on HPMP – 21st / 22nd October’ 11
Note: Above are survey figures, they can be more and may be known when the stakeholders submit their actual data’s
IPUA Final Analysis:The consumption split across various industry sectors is
estimated as under:
Stakeholder Workshop on HPMP – 21st / 22nd October’ 11
Suggestions & Recommendations:The industry sector groupings for phasing out of HCFC have
been arrived at , based on the following criteria:
Stakeholder Workshop on HPMP – 21st / 22nd October’ 11
Suggestions & Recommendations: Sector Consumption
Size of sector in terms of HCFC consumption e.g. (Phase out initiatives in sectors consuming larger quantities of HCFC would aid in delivering accelerated phase out of HCFC’s)
Competitive Intensity
Number of Players in each of the sectors (Sectors having fewer players are likely to be more organized with large companies that have strong financial standing & technical capabilities to execute phase out projects)
Substitutes/Alternatives Sectors where mature, proven and cost effective alternatives for HCFC phase out are available
Growth rate of the sector
Stakeholder Workshop on HPMP – 21st / 22nd October’ 11
Suggestions & Recommendations:Based on the selected criteria we have grouped the various sectors in order
to formulate different strategies timelines for each of the groupings. The table below
summarizes these groupings:
Stakeholder Workshop on HPMP – 21st / 22nd October’ 11
Suggestions & Recommendations:Recommended Strategy & Policy Changes:
The IPUA recommends the sector strategies in 2 phases:
Phase 1 StrategyA Multi-pronged approach is being suggested as under. One
for sectors falling under Group 1 i.e. Domestic Refrigeration and another
for sectors falling under Group 2 i.e. Continuous Panel and Integral Skin
Foam.
Stakeholder Workshop on HPMP – 21st / 22nd October’ 11
Stakeholder Workshop on HPMP – 21st / 22nd October’ 11
Suggestions & Recommendations:Phase 2 StrategyFor the other sectors i.e. Discontinuous panels, General
Insulation, Commercial Refrigeration & Thermoware we observe that an overall strategic approach covering the entire sector is not
feasible at the moment due to: Lack of proven cost effective alternate technologyLarge number of users making it difficult to manage the
transition that is equitable to ensure a level playing fieldSmaller consumption levels and slow growth rates
Stakeholder Workshop on HPMP – 21st / 22nd October’ 11
Suggestions & Recommendations:Phase 2 recommendations:
Stakeholder Workshop on HPMP – 21st / 22nd October’ 11
Mentioned below are certain fundamental recommendations across both phases:
Stakeholder Workshop on HPMP – 21st / 22nd October’ 11
THANKYOU