presentazione standard di powerpoint - milano componenti · presentazione standard di powerpoint...
TRANSCRIPT
Water softenersWE CONTROL THE WATER
MILANO COMPONENTI S.R.L. Via Carlo D’Adda 28 – 20143 MILANO Tel.: +39 02 89421465 – fax.: +39 02 83249533 - Email: [email protected] – www.milanocomponenti.com
WATER SOFTENERSWater softeners are used to reduce the hardness of water, or rather to lower the concentration of
the calcium and magnesium salts dissolved in it.
ADVANTAGES
By preventing scaling, these devices enable problems caused by scale deposits to be eliminated,
improving the performance of appliances and reducing maintenance costs.
Furthermore, only limited maintenance is needed for these highly reliable Milano Componenti
devices.
OPERATION
the most recent water softener models are designed for resin
regeneration by passing through brine (NaCl – sodium chloride):
rinsing takes place in the opposite direction to the intake flow, in
this way improving performance and reducing the consumption
of water and salt; this resin regeneration system also permits
reducing the risk of corrosion to the tank and dishes.
APPLICATIONS
Water softeners are used in all those applications where it is
necessary to reduce the limestone in water, such as:
Dishwashers
Coffee machines
Steam ovens
Vending machines
Small boilers
MILANO COMPONENTI S.R.L. Via Carlo D’Adda 28 – 20143 MILANO Tel.: +39 02 89421465 – fax.: +39 02 83249533 - Email: [email protected] – www.milanocomponenti.com
SPECIAL VERSIONS
There are various versions of Milano Componenti water
softeners, characterized by different sizes and capacities:
simple column units with separate salt bowl, monobloc
water softeners with integrated resin and salt container
and models with incorporated air-break and control of inlet
water via volumetric meters or flow meters.
On request and for sufficient quantities, Milano
Componenti also develops special versions to the client’s
design.
TECHNICAL SPECIFICATIONS
Salt container with self-filling on first cycle
Control of amount of salt for regeneration
Quick coupling of air-break/salt and resin
containers
Integrated flow meter
Reduced consumption of salt and water
ACCESSORIES
Separate salt bowl
Check valve
Low salt indicator using reed contact or float
Flow diverter solenoid valves
DVGW valves
MILANO COMPONENTI S.R.L. Via Carlo D’Adda 28 – 20143 MILANO Tel.: +39 02 89421465 – fax.: +39 02 83249533 - Email: [email protected] – www.milanocomponenti.com
READING – LITRES – TOT LITRES – HARDNESS F° - Regeneration after 300 litres – Salt bowl filled –NOTES – BAR – TIME – Tests carried out using water with hardness 24°F at 6°C – Constant pressure via pressure increase pump – Time needed for 10 litres to pass.