presentation1 on burglar alarm
TRANSCRIPT
TECHNO GLOBAL BALURGHAT
DEPARTMENT OF E.C.E.
PROJECT ON SENSITIVE OPTICAL BURGLAR ALARMPROJECT ON PART I
SUBMITTED BY:- PRADIPTA BHAR SOMA SARKAR
SOMENATH GANGULI
Use
• Burglar alarms are automatic home monitoring device to monitor and alert in case of a burglary attempt at that place-house or a commercial place.
• Our objective is to ensure security of property using our device.
Circuit Diagram
Components• Resistors (all ¼-watt, ± 5% Carbon unless stated
otherwise)
• VR1 = 1 MΩ
• VR2 = 100 KΩ• Capacitors
• Semiconductors
• LS1 = 8Ω / 0.5W
• T1 = 2N5777 Photo Transistor• T2 = BC547
• LED1 = RED LED
• IC1, IC2 = NE555• T1=2N5777 Photo Transistor• T2=BC547• LED1=RED LED• Miscellaneous• LS1=8Ω / 0.5W
Recent uses of the alarm
• A wireless home alarm system control panel made by Honeywell
AcknowledgementWe would like to express our sincere
gratitude to Mrs. Barsha Das Mondal and Mr.Aniruddha Sarkar for giving us the opportunity to work with our desired
project under their guidance and patient supervision.Their invaluable suggestion and opinions have been a paramount
source of inspiration for us thepermision to pursue the project which is mandatory in the present B.TECH Curriculum.Last but
not at the least we would like to thank each other for working hard as a group to
accomplish in due course.
CONCLUSION
Thus after months of research and careful contemplation we as a group
came out with the idea of Burglar Alarm.This document serves as the blueprint of the culmination of our
ideas.The work of the project is underway and ready to be completed
in the cource of time.