presentation nastar.ppt
TRANSCRIPT
Huawei GENEX Series
System Structure of GENEX Nastar GSMModule DescriptionThis module is used to import data and it has the following TransDataAn import module functions: Browsing the results of the traffic statistic register Displaying the information of the current database Backdating the information of the current traffic statistic task Nastar (The main module) This module is the access end of Nastar and it has the
following functions:Querying the customized traffic statistic tasks Displaying the traffic statistic query results directly Analyzing the RNO topics NaConvert module (An collection With this module, you can obtain the traffic statistic data from BAM and upload the data to the server of Nastar.
The structure of GENEX Nastar GSM Local network mode: Offline mode:In this mode, it is not required to install a database. In this mode, you can only analyze neighbors and frequencies, but you cannot analyze the traffic statistic.
Online mode:In this mode, it is not required to install a database. In this mode, you can analyze the traffic statistic, neighbors, and frequencies. This mode, however, cannot provide such functions as intelligent reports and performance alarms in the version of server. In addition, it can only analyze the networks in a restricted size.
Customer/Server mode
Installation of the Data Collection Module Installation of IISControl Panel Add/Delete a Component Install IIS (Install FTP Service)
Install IIS
Set FTP
Install Naconvert
Installation of the Data Collection Module FTP SettingControl PanelManagement ToolsInformation ServiceFTP Site Creation
Installation of the Data Collection Module FTP User SettingMy Computer Computer Management Local Users and Groups Users
Installation of the Data Collection Module
Installation of NaconvertCopy Naconvert.exe and five DLLs (ziparch.dll, SHLWAPI.dll, MFC42.DLL, MSVCRT.DLL, and MSVCIRT.DLL) to \\OMC\BSC\BAM Copy Naconvert.ini to \\OMC\BSC\public\initfile
Setting of the configuration files
Installation of Nastar GSM Installation of Nastar Client
Installation of Nastar GSM Installation of GENEX Shared
Installation of SQL ServerThe required version: SQL Server Standard+sp3
Setting of SQL ServerStep1: Set the servicesStep2: Set Autostart
Step3: Set the connection property
Introduction to the data source Project parametersThese parameters must contain the parameters: Cell Name, BTS Longitude, BTS Altitude, LAC, CI, and Directional Angle
Configuration parametersThese parameters must contain the configuration data of the cell. They are saved in BAM and the path is: \BSC\BAM\dbf
Traffic statistic dataThese parameters are the basis of the performance analysis. They are saved in BAM and the path is: \BSC\BAM\appsvr\stats\data
Introduction to the Software InterfaceSite deletion Cell deletionNeighbor analysis Working area
Site adding
Site information edition
Cell query Attribute view window Co-BCCH Co-BSIC check
Idle frequency point check Spectrum utilization analysisFrequency point check according to the frequency point
Frequency point check according to the cell
Site view window
Project Management Create a project
Step1: Star Nastar Step2:Click Setting
Step3Click Add
Step4:Add Project Name
Step5:Set Project configuration information
Project Management Open a projectStep1: Choose Project->Open Project
Step2: Choose the new project
Step3: Click OK
Project ManagementProject setting
Set a project
Set the map Delete the project
User Management User authority managementStep1:Project->User Management
Step2:Right Click -> Add a User
Step3:Right click User -> Authority Setting
Step4:Authority setting
Data Management Data import import of configuration parameters and traffic statistic dataStep1Create a network
Step2Create a BSC
Step3Import data dynamically
Step4Import configuration data
Step5Import traffic statistic data
Data Management Data import Project parameter import
The following parameters must match each other: Cell Name, LAC, CI, BTS Longitude, BTS Altitude, and Antenna Directional Angel
Data Management Data Export
Select the data sources to be exported
Select the parameters to be exported
The analysis flow of Nastar GSM RNO
RNO AnalysisNetwork Optimize AnalysisImport Project Parameter Network Trend Analysis Trouble Shooting Network Monitor Neighbors Analysis Frequency Analysis Configuration Par. Check
Import Project Data
Import Statistic Data
Import Configuration Data
Analysis Report
Create Project
Start Nastar
Check of Configuration ParametersStep1:Analysis->RNP Check
Step2:Select the check objects
Step3:Select the check parameters
Frequency Analysis Co-channel and adjacent channel check check according to the cellStep1:Frequency Analysis-> Co-fre. Adj-fre. Check
Step2:Select the check options
Step3:Select the cells
Frequency Analysis Co-channel and adjacent channel check check according to the frequency pointStep1:Frequency Analysis-> Co-fre. Adj-fre. Check
Step2Set of the frequency arrange
Step3Set the frequency points to be checked
Frequency Analysis Co-BCCH Co-BSIC check
Step1Frequency Analysis-> Co-BCCH Co-BSIC Check
Step2:Set the check conditions
Step3:Display the check results
Frequency Analysis Idle frequency point check
Step1:Frequency analysis-> Idle ARFCNs
Step2: Select the analysis area
Step3:Set the analysis conditions
Step4:Display the analysis results
Frequency Analysis Spectrum utilization analysis
Step1:Frequency analysis-> Spectrum Utilization
Step2:Set the analysis conditions
Step3:Display the analysis results
Frequency Analysis Frequency optimizationStep1:Frequency analysis-> Check Frequency Optimization
Step2:Set the analysis conditions
Step3:Select the analysis objects
Neighbor Analysis Neighbor queryStep1:Neighbor analysis-> Neighbors
Step2:Select the original cells to be queried
Neighbor maintenanceStep1:Display the neighbors
Step2:Modify the neighbors Step3:Save the modified results
Neighbor Analysis Neighbor checkCheck unidirectional neighbors and cells with fewer neighbors in the whole networkStep1:Neighbors Analysis-> Check Unidirectional Neighbors Step2:Display the query results in a list Step3:Display the query results geographical
Step1:Neighbors Analysis-> Check cells with fewer neighbors
Step2:Set the number of the neighbors Step3:Display the check results
Neighbor Analysis Automatic neighbor planningStep1:Neighbors Analysis-> Neighbor Autoplaning
Step2:Set the antenna information Step3:Set the geographical type of the planning area
Step4:Set the attribute Step5:Export the planning results
Network Performance Monitoring Performance indicator alarmStep1:Right click to select the alarm indicators
Step2:Set the monitor time Step3:Select the monitor objects
Step4:Set the alarm conditions Step5:Select the monitor indicators Step6:Edit the monitor conditions
Custom performance monitor indicatorsStep1:Custom Alarm-> New Alarm Task Step2: Select the template
Network Performance Monitoring
Step3:Set the monitor conditions Step4:Select the monitor objects
Step5:Set the monitor objects
Introduction to performance monitoring reports Network performance monitoring report - TL
Network Performance Monitoring
Count the network performance indicators and analyze the trend of the network performance within a week
Network monitoring report - EngineerCount the TOP 10 cells in the network KPI indicator, accessability, mobility, retainability, and network resource utilization and analyze the traffic statistic in detail, thus realizing a deep location of the network problems
Network performance monitoring report Compare ReportCompare and analyze the network KPI indicators of two weeks, thus realizing the performance indicator monitoring after the network optimization
Network Performance MonitoringPerformance monitoring reportsStep1:Select the analysis objects
Step2:Select the report type Step3:Set the analysis time segment Step4: Define the VIC area
Step5:Set the query time
Network Performance Monitoring Customized monitoring reportsStep1:Peformance Analysis-> Report wizard Step2:Set the report type
Step3:Count and set the capacity indicatorsStep4:Set the TOPN capacity indicators
Step5:Set the indicator thresholds Step6:Set the drawing indicators Step7:Count and set the worst cells
Deep Location of Network Problems Topics of the deep location ofnetwork problems Analysis of the performance KPI indicatorsQuery cell/BSClevel KPI indicators, analyze the trend of KPI indicators, analyze the TOPN cells, and filter the cells
Analysis of the access performanceDeep location of access performance problems
Analysis of the retainability performanceAnalyze SDCCH/TCH call drops
Analysis of the TRX performanceAnalysis of TRX measurement reports
Analysis of the mobility performanceDeep location of handover problems
Implementation of the topic tasksStep1:Double click Task
Deep Location of Network Problems
Step2:Set the statistic time segment
Step3:Set the analysis objects
Analysis of the Traffic Statistic Enhanced traffic statisticStep1:Performance Analysis-> Traffic Statistic
Step2:Set the report name Step3:Set the statistic time and type
Step4:Set the busy hour and statistic type Step5:Set the statistic objects Step6:Set the statistic indicators
Analysis of the Network Resources Statistic of the network resourcesStep1:Project->Resource Stat.
Step2:Set the analysis arrange
Step3:Select the statistic objects
Optimization of the network resourcesStep1:Performance Analysis-> WRO Report
Analysis of the Network Resources
Step2:Set the parameters
Step3:Set the analysis objects