presentation hydrogen generator and lifter

8/7/2019 presentation hydrogen generator and lifter

1/25

Innovations for future

Induction lifter (flying saucer)

Motionlessturbine

Hydrogen generator

How tu use water as fuel forany explosion engine!

-scram jet turbine


2/25

F uelgenerator

unlimited energy70% of the mass of the earthBuat actually the mainproduction method consist of boiling petroleum gaz with water

A clean and extremly hotcombustion

Hydrogen H2

While a clean and freesource is availaible

How to run enginewith pure water


3/25

E lectolisys method


4/25

How does it look like

water

electrodes

h2Output

To generator


5/25

A few videos


6/25

aplications

5hpgenbfr.rm


7/25


8/25

F uel generator

Below, an analysis of this synthetic gas by theNASA :

Hydrogen 46.483 %carbon Dioxide 9.329

Carbon Monoxide 38.370

Various gasTotal 100.015

e


9/25

P ulse jet engine


10/25

P ulse jet


11/25

Scram jet engine


12/25


13/25

Scramjet engine

An outstanding speed from mach7 to mach 15expected

No mechanical partsNo moving parts

Requieres to be launched at mach4+

intake


14/25


15/25

The flying saucer

Works with the priciple of the brown effect

The B iefeld B rown effect is an electrical

effect that produces an ionic wind thattransfers its momentum to surroundingneutral particles, first discovered by P aulAlfred Biefeld


16/25

When high voltage is submitted, just below the nominalbreakdown voltage of air, between two sharp points, Thiscreates a high field gradient around the smaller, positivelycharged electrode. Around this electrode, ionization occurs,

that is, electrons are stripped from the atoms in thesurrounding medium; they are literally pulled right off bythe electrode's charge.

Electron stolento an air atom

E lectron gettingback to air atom

++++

----

Airpulse

The air is moved by theelectrons


17/25


18/25


19/25


20/25


21/25


22/25


23/25

Soon available at your local dealer


24/25

Lifter

O n June 2001, Transdimensional Technologies has presented the Lifter1 and Lifter2 devices. The Lifter1 devicewas built with three capacitors joined so as to form a triangle assembly and the Lifter2 is three time heavier andthree time bigger than the Lifter1 . These devices are able to lift their own weight and they are a "modernversion" of the Townsend B rown Electrokinetic Apparatus. The Lifters are using the B iefeld- B rown Effect togenerate the main thrust to self levitate. I have already built some similar devices in April 1999, see " The EHDFlying Saucer v1.0 ".In the Townsend B rown Electrokinetic Apparatus described in the US Patent N2949550 filed on Aug 16, 1960and titled "Elektrokinetic Apparatus" you will find the full description of the main principle used in the Lifterdevices :


25/25

The Lifter is an asymmetrical capacitor which uses High Voltage ( > 20KV ) toproduce a thrust.The Lifter works without moving parts, flies silently, uses only electrical energyand is able to lift its own weight plus an additional payload. The Lifter uses theB iefeld- B rown effect discovered by Thomas Townsend B rown in 1928. The basicdesign of the Lifter has been fully described in the Townsend B rown US Patent

N2949550 filed on Aug 16, 1960 and titled "Elektrokinetic Apparatus", you willfind in this patent the full description of the main principle used in the Lifterdevices.Today, more than 350 Lifter replications have been done successfully by manyexperimenters and physicists Worldwide ( see The Worldwide Lifters replicationslogbook ) .O n January 22th, 2003, I have fully demonstrated with the 250 g weight Lifter

"Maximus ][" experiment, that a Lifter can be scaled up and also that such adevice is able to lift 60 g of payload. It is now possible to build a VT O L craft whichwill use the B iefeld- B rown effect to fly silently and without moving parts ( seeVTO L Lifter-Craft Mk III ) only powered by el

presentation hydrogen generator and lifter

Documents