Part 1 – For users with Video Insight IP Server

version 3.0 – or higher use the following instructions

*See Part 2 of document for later versions of Video Insight IP Server and

Prerequisites

1. Video Insight server running 5.5.18.32. Infinias Server running 3.0 or later3. Open ports 18779 and the desired event port needed for Video Insight and

Infinias

Configuration - Infinias

1. Log into the Infinias software via the w

2. Once logged into the Infinias website, left

3. In the configuration section, click on the

Video Insight IP Server version 5.5.18.3 - 6.3.0.12, and

use the following instructions.

of document for later versions of Video Insight IP Server and infinias

Video Insight server running 5.5.18.3-6.3.0.12 Infinias Server running 3.0 or later Open ports 18779 and the desired event port needed for Video Insight and

the Infinias software via the website. The default credentials are admin/admin

ed into the Infinias website, left click on the Configuration link.

In the configuration section, click on the Peripherals tab.

, and infinias

infinias.

Open ports 18779 and the desired event port needed for Video Insight and

efault credentials are admin/admin.

link.

4. Once in the Peripherals tab, click on the

When the Create Peripheral window pops up, enter the following information

Name – Generic Peripheral

Protocol – http://

Host Name – Enter the IP address of the IP Server

Port – Select a desired port to be used as the event port (9001 is used in this example)

Username – n/a (credentials are not needed regardless if security is enabled or not)

Password – n/a (credentials are not neede

Once in the Peripherals tab, click on the Create Peripheral link under Actions.

When the Create Peripheral window pops up, enter the following information

Generic Peripheral

Enter the IP address of the IP Server

Select a desired port to be used as the event port (9001 is used in this example)

n/a (credentials are not needed regardless if security is enabled or not)

(credentials are not needed regardless if security is enabled or not)

link under Actions.

When the Create Peripheral window pops up, enter the following information:

Select a desired port to be used as the event port (9001 is used in this example)

n/a (credentials are not needed regardless if security is enabled or not)

d regardless if security is enabled or not)

5. Click Create to Save.

Configuration – Video Insight Integration

The access control portion will need to be configured on the Video Insight application. Open the

Monitor Station and Administration >

From VI Monitor, enable the Access Control Support checkbox and select Infinias from the Access

Control Type.

1. Enter the following information into the Connection Information Fields

Server – Enter the IP address of the

Port – Port number 18779 is required and cannot be changed.

User – Enter the username of the Infinias software.

Password – Enter the password of user listed above.

Test Connection – Use this button to test the connection once completed

Event Port – This is the port number that was ass

2. Click Test Connection to confirm the integration is working. A dialog box will appear stating: Access

Control System Connection Successful.

Video Insight Integration

The access control portion will need to be configured on the Video Insight application. Open the

Monitor Station and Administration > Servers and Access Configuration.

From VI Monitor, enable the Access Control Support checkbox and select Infinias from the Access

Enter the following information into the Connection Information Fields

Enter the IP address of the Infinias server.

Port number 18779 is required and cannot be changed.

Enter the username of the Infinias software.

Enter the password of user listed above.

Use this button to test the connection once completed.

This is the port number that was assigned in the Peripheral section.

Click Test Connection to confirm the integration is working. A dialog box will appear stating: Access

Control System Connection Successful.

The access control portion will need to be configured on the Video Insight application. Open the

From VI Monitor, enable the Access Control Support checkbox and select Infinias from the Access

igned in the Peripheral section.

Click Test Connection to confirm the integration is working. A dialog box will appear stating: Access

3. Click on “Import Doors” to display the list of doors in the Infinias system.

4. Select the desired doors to add to VI Monitor by selecting a door and clicking the Add

5. The doors will not be imported or configured completely unless a camera is asso

Select a door and click Properties to associate a Camera. Click OK.

Click on “Import Doors” to display the list of doors in the Infinias system.

Select the desired doors to add to VI Monitor by selecting a door and clicking the Add

The doors will not be imported or configured completely unless a camera is associated with a door.

Select a door and click Properties to associate a Camera. Click OK.

Select the desired doors to add to VI Monitor by selecting a door and clicking the Add-> button.

ciated with a door.

The installation is now complete.

Part 2 – For users with Video Insight IP Server version

4.5.3410.0

Prerequisites

Video Insight IP Server version 6

plug-in installer found on www.downloadvi.com

Configuration – Video Insight Integration

First, run the Video Insight Plugin installer and select

make sure to restart VI Monitor/Monitor Station and the IP Service.

The access control portion will need to be configured on the Vide

the VI Monitor and click on Server Setup. Select the correct server and select Access

Configuration. Enable the Access Control Support checkbox and select

Control Type.

Insight IP Server version 6.3.2.12 or higher, with

Infinias Integration Guide

.3.2.12 or higher, with infinias version 4.5.3410

www.downloadvi.com.

Insight Integration

un the Video Insight Plugin installer and select infinias. Once the installer is complete,

make sure to restart VI Monitor/Monitor Station and the IP Service.

The access control portion will need to be configured on the Video Insight application. Open

VI Monitor and click on Server Setup. Select the correct server and select Access

nable the Access Control Support checkbox and select infinias

with infinias version

5.3410.0, use the VIAC

. Once the installer is complete,

o Insight application. Open

VI Monitor and click on Server Setup. Select the correct server and select Access

from the Access

6. Enter the following information into the Connection Information Field:

IP Address - Enter the IP address of the

Port – The default port should be “

User – The default username is “

Password – The default password

Event Port – Leave the event port

7. Click Test Connection to confirm the integration is working. A dialog box will appear

stating: Access Control System Connection Successful

8. Click on “Import Doors” to display the list of doors in the

9. Select the desired doors to add to VI Monitor by selecting a door and clicking the Add

button.

information into the Connection Information Field:

Enter the IP address of the infinias system.

The default port should be “18779”.

“admin”.

The default password is “admin”.

event port as “0”.

to confirm the integration is working. A dialog box will appear

Access Control System Connection Successful.

Click on “Import Doors” to display the list of doors in the infinias system.

e desired doors to add to VI Monitor by selecting a door and clicking the Add

to confirm the integration is working. A dialog box will appear

system.

e desired doors to add to VI Monitor by selecting a door and clicking the Add->

10. The doors will not be imported or configured completely unless a camera is associated

with a door. Select a door and click Properties to associate a Camera. Click

11. The installation is now complete.

The doors will not be imported or configured completely unless a camera is associated

with a door. Select a door and click Properties to associate a Camera. Click OK.

The installation is now complete.

The doors will not be imported or configured completely unless a camera is associated

OK.