2Baker Water Systems Division - Monitor • Evansville, WI 53536

Phone: 800-356-5130 • Fax: 608-882-3777 • Website: baker-mfg.com.com

PREMIUM VENTILATED CAP - The Premium Ventilated Cap attaches to the well casing with (3) square head set screws. The conduit attaches to the threaded adapter which allows the cap to be removed without disturbing the wiring. Made of high quality grey cast iron. Painted green and oven dried to produce a durable high quality finish.

PREMIUM VENTILATED CAP

Order O.D. Conduit No. Wt. Case Size Tap Size 4V 7 4-1/2” 1” 5V 9 5-9/16” 1” 5.6V 9 6” 1” 6V 9 6-5/8” 1” 6.6V 9 7” 1” 7V 10 7-5/8” 1”

Baker Manufacturing Co. • Phone: 800-356-5130 • Fax: 608-882-37773Baker Water Systems Division - Monitor • Evansville, WI 53536

Phone: 800-356-5130 • Fax: 608-882-3777 • Website: baker-mfg.com.com

THE TURTLE® VERMIN WATERTIGHT CAP – The Turtle

Vermin Watertight Cap is a two-piece cast iron cap that features a Neoprene “O”-ring seal on the well. The top of the cap removes for easy well servicing. Standard WE1-series cap attaches to steel or PVC well casing with three square head bolts. WE1P-series cap for PVC casing attaches by solvent welding (gluing). All models have two large screened vent areas. Stainless steel hardware included. Conforms to Water System Council PAS-97(04) Standards.Vermin resistant. Painted green and oven dried to produce a durable high quality finish.

Personalized Turtle Caps are available upon request. Personalized Caps (cast into iron cap or hot stamped into ABS cap). Minimum order (per well size) of personalized caps: 50 caps. ± 10% deviation must be allowed on personalized caps.

TURTLE® WATERTIGHT CAP

CAST IRON VERMIN WATERTIGHT TURTLE® CAP

ABS VERMIN WATERTIGHT TURTLE® CAP

CI Lid & CI Base Ring CI Lid & PVC Base Ring Max. O.D. Conduit Order No. Casing O.D. Wt. Order No. Wt. Case Size Tap Size 4WE1 4.545 6 4WE1P 4.125 4-1/2” 1” 4.5WE1* 9 5” 1” 5WE1 5.618 7 5WE1P 4.5 5-9/16” 1” 5.5WE1* 10 6” 1” 6WE1 6.69 8 6WE1P 5 6-5/8” 1” 6WE11.2 6.69 8 6-5/8” 1-1/4” 6.5WE11.2* 12 7” 1-1/4” 6.9WE11.2 12 6.9” 1-1/4” 7WE11.2 7.70 10 7-5/8” 1-1/4” *For Whitewater Pitless Units.

8VR CAST IRON VERMIN WATERTIGHT CAP

8VR Vermin resistant cast iron cap, includes rubber gasket, large vented screen and 1-1/4” conduit tapping.

Order No. O.D. Case Size Conduit Tap Size Wt. 8VR 8-5/8” 1-1/4” 20.5

Cast Iron

ABS

ABS Lid & CI Base Ring ABS Lid & PVC Base Ring Order No. Order No. Order No. Order No. O.D. Conduit (Single cap) Wt. (6 Pack) Wt. (Single cap) Wt. (6 Pack) Wt. Case Size Tap Size 4PM1 3.8 4PM61 23 4PT1 1.3 4PT61 8 4-1/2” 1” 4.5PM1 4 4.5PM61 24 5” 1” 5PM1 4.2 5PM61 25 5PT1 1.7 5PT61 10 5-9/16” 1” 5.5PM1 5 5.5PM61 30 6” 1” 6PM1 4.3 6PM61 26 6PT1 1.8 6PT61 11 6-5/8” 1” 6PM11.2 4.3 6PM611.2 26 6-5/8” 1-1/4”

4Baker Water Systems Division - Monitor • Evansville, WI 53536

Phone: 800-356-5130 • Fax: 608-882-3777 • Website: baker-mfg.com.com

PREMIUM WATERTIGHT CAP - A truly watertight cap which is secured to the pitless casing with a compression gasket. The top of the cap can be removed without effecting the seal, conduit or wiring. The Premium Watertight Cap is made of high quality grey cast iron. Painted green and oven dried to produce a durable high quality finish. All hardware is plated. Conforms to Water System Council PAS-97(04) Standards.

(Premium Watertight Cap can be used as a vacuum seal when conduit is plugged)

PREMIUM WATERTIGHT CAP

PREMIUM WATERTIGHT CAP Order O.D. Max. Conduit Vent Tap No. Casing Size Case O.D. Tap Size Size Wt. 4W 4-1/2” 4.545 1-1/2” 1” 13 5W 5-9/16” 5.618 1-1/2” 1” 16 6W 6-5/8” 6.69 1-1/2” 1-1/4” 19 6.6W 7” 7.07 1-1/2” 1-1/4” 21 7W 7-5/8” 7.70 1-1/2” 1-1/2” 22 8W 8-5/8” 8.71 1-1/2” 2” 41 10W 10-3/4” 10.86 3” 2-1/2” 62 12W 12-3/4” 12.88 3” 2-1/2” 120

All Caps have Stainless Steel hardware

Baker Manufacturing Co. • Phone: 800-356-5130 • Fax: 608-882-37775Baker Water Systems Division - Monitor • Evansville, WI 53536

Phone: 800-356-5130 • Fax: 608-882-3777 • Website: baker-mfg.com.com

PREMIUM WATERTIGHT CAP W/SCREENED AIR VENT

PREMIUM WATERTIGHT CAP WITH SCREENED AIR VENT - A truly watertight cap which is secured to the pitless casing with a compression gasket. The top of the cap can be removed without affecting the seal, conduit or wiring. It is made of high quality grey cast iron. Painted green and oven dried to produce a durable high quality finish. All our high quality hardware is plated. This model has an addition of a pipe nipple and Monitor stainless steel vent screen. Approved for Illinois, Michigan and Wisconsin.Conforms to Water System Council PAS-97(04) Standards.

PREMIUM WATERTIGHT CAP WITH AIR VENT

Order O.D. Max. Conduit Vent Tap No. Casing Size Case O.D. Tap Size Size Wt.

4WPSM 4-1/2” 4.545 1-1/2” 1” 165WPSM 5-9/16” 5.618 1-1/2” 1” 186WPSM 6-5/8” 6.69 1-1/2” 1-1/4” 216.6WPSM 7” 7.07 1-1/2” 1-1/4” 237WPSM 7-5/8” 7.70 1-1/2” 1-1/2” 248WPSM 8-5/8” 8.71 1-1/2” 2” 47

All Caps have Stainless Steel hardware

6Baker Water Systems Division - Monitor • Evansville, WI 53536

Phone: 800-356-5130 • Fax: 608-882-3777 • Website: baker-mfg.com.com

JET PUMP CAPMONITOR® CAP FOR JET PUMP INSTALLATIONS. The 3WJ Cap is a watertight cap designed to be threaded onto the pitless casing and comes with a 1” pipe nipple and screened well vent.

MONITOR® JET PUMP CAP

Order I.D. No. Type Case Size Wt. 3WJ Watertight 3” 5

SCREENED AIR VENT

SCREENED AIR VENT – The Screened Air Vent is a protected well vent for use on watertight cap installations. It consists of 24 mesh stainless steel screens assembled into a high quality iron casting. This engineered design protects the screen from any potential damage.

SCREENED AIR VENT

Order Tap No. Size Wt. 70PS 1” 2 71PS 1-1/4” 2.5 72PS 1-1/2” 3.5 73PS 2” 7 74PS 2-1/2” 11