preferred ordering guide for netconnect · adaptor clips 15 surface mount outlets 16 faceplates 16...
TRANSCRIPT
Preferred ordering guide for NETCONNECTAustralia
EDITION 2
Table of Contents
Preferred ordering guide for NETCONNECT Australia
Copper Solutions 5
Category 6A U/UTP products 5
Category 6A U/UTP Cable 5
Category 6A U/UTP SL Patch Panels UNLOADED 5
Category 6A U/UTP AMPTWIST SL Series Jacks 6
Category 6A U/UTP Patch Cords (LSZH) 7
Category 6A F/UTP products 8
Category 6A F/UTP Cable 8
Category 6A F/UTP Patch Panels 8
Category 6A F/UTP AMPTWIST SL Series Jacks 9
Category 6A S/FTP Patch Cords (LSZH) 10
Category 6 U/UTP products 11
Category 6 U/UTP Cable 11
Category 6 U/UTP Patch Panels 11
Category 6 U/UTP Jacks 12
Category 6 U/UTP Patch Cords 13
Complementary Copper Solutions 14
Copper Tools 14
Patch Panel Accessories 14
Horizontal Cable Management 15
Adaptor Clips 15
Surface Mount Outlets 16
Faceplates 16
Ceiling Connector Assembly (CCA). Field Terminated Plug Connector for Modified Permanent Link 17
HighBand Frame and Consolidation Point (for NETCONNECT UTP) 17
Fibre Solutions 18
Fibre Optic Cables 18
Fibre Optics Cables - Indoor Distribution Series (D-Series) 18
Fibre Optics Cables - Outdoor/Underground 19
Fibre Connectivity 20
Rackmount Fibre Trays - 19” 20
QUICK-FIT Modules 21
Fiber Patch Cords and Pigtails 22
Fibre Optic Patch Cords 22
Fibre Optic Pigtails 24
Fibre Optic Splice Protectors 25
Fibre Optic Cleaning Accessories 25
Table of Contents
Preferred ordering guide for NETCONNECT Australia
Pre-terminated Fibre 26
MPO/ MTP Patch Cable, 3.2mm OSD, LSZH, OM4, 12 Fibre - Straight 26
MPO/ MTP Trunk Cables, Distribution Series Cable, 6.4mm OSD, LSZH, OM4, 12 Fibre - Straight 27
MPO/ MTP Patch Cable, 3.8mm OSD, LSZH, OM4, 24 Fibre - Straight 28
MPO/ MTP Trunk Cables, Distribution Series Cable, 7.4mm OSD, LSZH, OM4, 24 Fibre - Straight 29
MPO/ MTP Patch Cable, 3.2mm OSD, LSZH, OS2, 12 Fibre - Straight 30
MPO Singlemode Preterminated Trunk Cables, Distribution Series Cable, LSZH, OS2, 12 Fibre - Straight 31
MPO Cassettes for Preterminated MPO Cables 32
MPO Patch Panels - QUICK-FITStyle 33
Accessories 33
G2 Modules 34
G2 Fibre Trays 35
Preferred ordering guide for NETCONNECT Australia
The CommScope NETCONNECT ordering guide for the Australia region contains commonly ordered copper and fibre structured cabling products. This information is subject to change. For a comprehensive, up-to-date listing of CommScope products, please go to www.commscope.com
Preferred ordering guide for NETCONNECT Australia 5
Q Back to contents page
Copper SolutionsCategory 6A U/UTP products
Category 6A U/UTP CableMID Part Number Part Description Description
884031004/10 Cat 6A Cable 4 Pair UTP Solid PVC. 305mtr Reel - BLUE. 7.25mm OD. 23AWG
884019304/10 Cat 6A Cable 4 Pair UTP Solid PVC. 305mtr Reel - GREY. 7.25mm OD. 23AWG
AZ884028704/10 Cat 6A Cable 4 Pair UTP Solid LSZH. 305mtr Reel - BLUE. 7.25mm OD. 23AWG
AZ884026504/10 Cat 6A Cable 4 Pair UTP Solid LSZH. 305mtr Reel - GREY. 7.25mm OD. 23AWG
Category 6A U/UTP SL Patch Panels UNLOADEDMID Part Number Part Description Description
DDM = Discrete Distribution Module style. Accepts SL UTP format jacksTerminated with SL Series Tool (MID Part Number: 1725150-1). Use suitable PDL Adaptor/Clipsal or HPM Bezel where required.
760237040 CPP-UDDM-SL-1U-24 24 port UTP Patch Panel, 19” - 1RU (with rear Cable Management). DDM Flush Mount UNLOADED.
760237042 CPPA-UDDM-SL-1U-24 24 port UTP Patch Panel, 19” - 1RU (with rear Cable Management) - DDM Angled. UNLOADED.
760237044 CPPR-UDDM-SL-1U-24 24 port UTP Patch Panel, 19” - 1RU (with rear Cable Management) - DDM Recessed Angled. UNLOADED.
760229179 CPP-SVS-KIT CommScope Saddle & Velcro Strap Kit. Required for rear cable manager
Use with the following UTP Cat 6A SL Jacks
1933476-2 Cat 6A UTP AMPTWIST SL jack – BLACK (MOQ = 24)
Flush Mount Angled Recessed Angled Saddle & Velcro Kit (Required for every panel)
Preferred ordering guide for NETCONNECT Australia 6
Q Back to contents page
Copper SolutionsCategory 6A U/UTP products
Category 6A U/UTP AMPTWIST SL Series MID Part Number Part Description Description
Terminated with SL Series Tool (MID Part Number: 1725150-1). Use suitable PDL Adaptor/Clipsal or HPM Bezel where required.
1-1933476-3 Cat 6A UTP AMPTWIST SL jack - WHITE (MOQ = 24)
1933476-2 Cat 6A UTP AMPTWIST SL jack - BLACK (MOQ = 24)
2111676-1 Cat 6A UTP AMPTWIST SL jack - LT/ALMOND - with Dust Cover
2111676-2 Cat 6A UTP AMPTWIST SL jack - BLACK - with Dust Cover
Coloured caps available - Change front facing colour of the jack
2111243-9 Cat 6A SL Jack Coloured Cap - GREEN. MOQ = 50. Price per each
2111243-6 Cat 6A SL Jack Coloured Cap - BLUE. MOQ = 50. Price per each
2111243-8 Cat 6A SL Jack Coloured Cap - YELLOW. MOQ = 50. Price per each
2111243-7 Cat 6A SL Jack Coloured Cap - RED. MOQ = 50. Price per each
2111243-5 Cat 6A SL Jack Coloured Cap - ORANGE. MOQ = 50. Price per each
2111243-4 Cat 6A SL Jack Coloured Cap - GREY. MOQ = 50. Price per each
CommScope Adaptor/Bezel standard Clipsal/HPM
64671116-02 Adaptor Clip - White. Use to mount AMPTWIST and SL Jacks into Clipsal/HPM Faceplate Bag of 10
64671116-00 Adaptor Clip - Black. Use to mount AMPTWIST and SL Jacks into Clipsal/HPM Faceplate Bag of 10
64671116-07SH Adaptor Clip - White. WITH SHUTTER. Use to mount AMPTWIST and SL Jacks into Clipsal/HPM Faceplate Bag of 10
Cat 6A SL jack- White Cat 6A SL jack- Black Clipsal/ HPM Style Adapter – Black/ White
Shuttered Bezel
Note: If using a Jack with Dust Cover, remove the nose piece to attach Bezel.
Preferred ordering guide for NETCONNECT Australia 7
Q Back to contents page
Copper SolutionsCategory 6A U/UTP Products
Category 6A U/UTP Patch Cords (LSZH)MID Part Number Part Description Description
Patch cords have outside diameter of 7.2mm
NPC6AUZDB-BL001M Cat 6A RJ45 Unshielded Patch Cord (LSZH) Blue (1.0M)
NPC6AUZDB-BL002M Cat 6A RJ45 Unshielded Patch Cord (LSZH) Blue (2.0M)
NPC6AUZDB-BL003M Cat 6A RJ45 Unshielded Patch Cord (LSZH) Blue (3.0M)
NPC6AUZDB-BL005M Cat 6A RJ45 Unshielded Patch Cord (LSZH) Blue (5.0M)
NPC6AUZDB-BL010M Cat 6A RJ45 Unshielded Patch Cord (LSZH) Blue (10M)
NPC6AUZDB-WT001M Cat 6A RJ45 Unshielded Patch Cord (LSZH) White (1.0M)
NPC6AUZDB-WT002M Cat 6A RJ45 Unshielded Patch Cord (LSZH) White (2.0M)
NPC6AUZDB-WT003M Cat 6A RJ45 Unshielded Patch Cord (LSZH) White (3.0M)
NPC6AUZDB-WT005M Cat 6A RJ45 Unshielded Patch Cord (LSZH) White (5.0M)
NPC6AUZDB-WT010M Cat 6A RJ45 Unshielded Patch Cord (LSZH) White (10M)
Cat 6A U/UTP Patch Cord Cat 6A U/UTP Slimline Patch Cord Available Upon Request
Other colours available (BK=Black, GR=Green, GY=Grey, OR=Orange, RD=Red, YL=Yellow)
Preferred ordering guide for NETCONNECT Australia 8
Q Back to contents page
Copper SolutionsCategory 6A F/UTP Products
Category 6A F/UTP CableMID Part Number Part Description Description
884024508/10 Cat 6A F/UTP Cable, 23AWG, OD 7.2mm, LSZH, White - 305mtr Reel
884028508/10 Cat 6A F/UTP Cable, 23AWG, OD 7.2mm, LSZH, Blue - 305mtr Reel
For external applications please use cable below
460158784 Cat 6A F/UTP Cable, 23AWG. OD 7.9mm. BLACK. Gel Flooded. Polyethylene Jacket (UV Resistant) – 305mtr Reel
Other colours available on request
Category 6A F/UTP Patch PanelsMID Part Number Part Description Description
DDM = Discrete Distribution Module style. Accepts Shielded SL format jacks Terminated with SL Series Tool (MID Part Number: 1725150-1). Use suitable PDL Adaptor/Clipsal or HPM Bezel where required.
760237046 CPP-SDDM-SL-1U-24 24 port STP Patch Panel, 19" - 1RU (INCLUDES rear Cable Management) - DDM Flush mount. UNLOADED.
760237048 CPPA-SDDM-SL-1U-24 24 port STP Patch Panel, 19" - 1RU (INCLUDES rear Cable Management) - DDM Angled. UNLOADED.
760237050 CPPR-SDDM-SL-1U-24 24 port STP Patch Panel, 19" - 1RU (INCLUDES rear Cable Management) - DDM Recessed Angled. UNLOADED.
760229179 CPP-SVS-KIT CommScope Saddle & Velcro Strap Kit. Required for rear cable manager
Use with the following Shielded Cat 6A SL Jacks
2153449-2 Cat 6A RJ45 AMP-TWIST SLX Shielded Jack Black without Dustcover (MOQ = 24)
Cat 6A F/UTP - White Cat 6A F/UTP – Blue Cat 6A F/UTP - External/ Underground
Flush Mount Angled Recessed Angled Saddle & Velcro Kit (Required for every panel)
Preferred ordering guide for NETCONNECT Australia 9
Q Back to contents page
Category 6A F/UTP AMPTWIST SL SeriesMID Part Number Part Description Description
Terminated with SL Series Tool (MID Part Number: 1725150-1). Use suitable Face Plate and PDL Adaptor/Clipsal or HPM Bezel where required.
1-2153365-3 Cat 6A RJ45 AMP-TWIST SLX Shielded Jack Alpine White with Dustcover (MOQ = 24)
2153365-2 Cat 6A RJ45 AMP-TWIST SLX Shielded Jack Black with Dustcover (MOQ = 24)
1-2153449-3 Cat 6A RJ45 AMP-TWIST SLX Shielded Jack Alpine White without Dustcover (MOQ = 24)
2153449-2 Cat 6A RJ45 AMP-TWIST SLX Shielded Jack Black without Dustcover (MOQ = 24)
1711343-2 Cat 6A 500Mhz RJ45 AMPTWIST Shielded SL Series Jack - 90º Exit
Copper SolutionsCategory 6A F/UTP products
Without Dust Cover With Dust Cover 90° Exit (Right Angle)
SLX Jack colour options available upon request (Almond, Blue, Black, Green, Grey, Orange, Red, White, Yellow)
Note: If using a Jack with Dust Cover, remove the nose piece to attach Bezel.
Preferred ordering guide for NETCONNECT Australia 10
Q Back to contents page
Copper SolutionsCategory 6A F/UTP Products
Category 6A S/FTP Patch Cords (LSZH)MID Part Number Part Description Description
Patch cords have outside diameter of 5.9mm. Other colours and lengths available
NPC6ASZDB-BL050C Cat 6A S/FTP, RJ45, Patch Cord, LSZH, Blue - 0.5 mtr
NPC6ASZDB-BL001M Cat 6A S/FTP, RJ45, Patch Cord, LSZH, Blue – 1 mtr
NPC6ASZDB-BL150C Cat 6A S/FTP, RJ45, Patch Cord, LSZH, Blue - 1.5 mtr
NPC6ASZDB-BL002M Cat 6A S/FTP, RJ45, Patch Cord, LSZH, Blue – 2 mtr
NPC6ASZDB-BL003M Cat 6A S/FTP, RJ45, Patch Cord, LSZH, Blue – 3 mtr
NPC6ASZDB-BL005M Cat 6A S/FTP, RJ45, Patch Cord, LSZH, Blue - 5 mtr
NPC6ASZDB-BL010M Cat 6A S/FTP, RJ45, Patch Cord, LSZH, Blue – 10 mtr
NPC6ASZDB-WT050C Cat 6A S/FTP, RJ45, Patch Cord, LSZH, White – 0.5 mtr
NPC6ASZDB-WT001M Cat 6A S/FTP, RJ45, Patch Cord, LSZH, White – 1 mtr
NPC6ASZDB-WT150C Cat 6A S/FTP, RJ45, Patch Cord, LSZH, White - 1.5 mtr
NPC6ASZDB-WT002M Cat 6A S/FTP, RJ45, Patch Cord, LSZH, White – 2 mtr
NPC6ASZDB-WT003M Cat 6A S/FTP, RJ45, Patch Cord, LSZH, White – 3 mtr
NPC6ASZDB-WT005M Cat 6A S/FTP, RJ45, Patch Cord, LSZH, White – 5 mtr
NPC6ASZDB-WT010M Cat 6A S/FTP, RJ45, Patch Cord, LSZH, White – 10 mtr
Other colours available on request (BK=Black, GR=Green, GY=Grey, OR=Orange, RD=Red, VL=Violet, YL=Yellow)
Preferred ordering guide for NETCONNECT Australia 11
Q Back to contents page
Copper SolutionsCategory 6 U/UTP Products
Category 6 U/UTP Cable MID Part Number Part Description Description
REELSPEED Cable Reel - Interlocking Exo-skeleton
64991030-01A 6499 1 030-01A Cat.6 U/UTP Cable, 23AWG, OD 6.4mm, GREY. REELSPEED. 305mtr
64991030-03A 6499 1 030-03A Cat.6 U/UTP Cable, 23AWG, OD 6.4mm, BLUE. REELSPEED. 305mtr
Standard Cable Reel-in-a-box
64991030-01AB 6499 1 030-01AB Cat.6 U/UTP Cable, 23AWG, OD 6.4mm, GREY. Reel in a box. 305mtr
64991030-03AB 6499 1 030-03AB Cat.6 U/UTP Cable, 23AWG, OD 6.4mm, BLUE. Reel in a box. 305mtr
Cat 6 U/UTP Cat 6 U/UTP REELSPEED
Category 6 U/UTP Patch PanelsMID Part Number Part Description Description
erminated with SL Series Tool (MID Part Number: 1725150-1). Use suitable PDL Adaptor/Clipsal or HPM Bezel where required.
760237040 CPP-UDDM-SL-1U-24 24 port UTP Patch Panel, 19" - 1RU (WITH rear Cable Management). DDM Flush Mount UNLOADED.
760237042 CPPA-UDDM-SL-1U-24 24 port UTP Patch Panel, 19" - 1RU (WITH rear Cable Management) - DDM Angled. UNLOADED.
760237044 CPPR-UDDM-SL-1U-24 24 port UTP Patch Panel, 19" - 1RU (WITH rear Cable Management) - DDM Recessed Angled. UNLOADED.
760229179 CPP-SVS-KIT CommScope Saddle & Velcro Strap Kit. Required for rear cable manager
Use with the following UTP Cat 6 SL Jacks
9-1375055-2 Cat.6 UTP RJ45 SL Jack, T568A or T568B - BLACK. (MOQ = 24)
Flush Mount Angled Recessed Angled Saddle & Velcro Kit (required for every panel)
Preferred ordering guide for NETCONNECT Australia 12
Q Back to contents page
Copper SolutionsCategory 6 U/UTP Products
Category 6 U/UTP JacksMID Part Number Part Description Description
SL Series suits Clipsal/HPM, Bag of 10 and includes Bezel/Adaptor Terminated with 110 or SL Series Tool (MID Part Numbers: 1375308-1 or 1725150-1).
760238472 Cat.6 UTP RJ45 SL Jack, T568A or T568B - WHITE. Plus Clipsal/ HPM Style adaptor. (MOQ = 10)
760238471 Cat.6 UTP RJ45 SL Jack, T568A or T568B - BLACK. Plus Clipsal/ HPM Style adaptor. (MOQ = 10)
760238473 Cat.6 UTP RJ45 SL Jack, T568A or T568B - WHITE. Plus Clipsal/ HPM Style with shutter. (MOQ = 10)
SL Series without Bezel/Adaptor. Use suitable Face Plate and PDL Adaptor/ Clipsal or HPM Bezel where required. Terminated with 110 or SL Series Tool (MID Part Numbers: 1375308-1 or 1725150-1).
1-1375055-3 Cat.6 UTP RJ45 SL Jack, T568A or T568B - WHITE
1375055-2 Cat.6 UTP RJ45 SL Jack, T568A or T568B - BLACK
1375055-4 Cat.6 UTP RJ45 SL Jack, T568A or T568B - GREY
1375055-5 Cat.6 UTP RJ45 SL Jack, T568A or T568B - ORANGE
1375055-6 Cat.6 UTP RJ45 SL Jack, T568A or T568B - BLUE
1375055-7 Cat.6 UTP RJ45 SL Jack, T568A or T568B - RED
1375055-8 Cat.6 UTP RJ45 SL Jack, T568A or T568B - YELLOW
1375055-9 Cat.6 UTP RJ45 SL Jack, T568A or T568B - GREEN
1-1375055-0 Cat.6 UTP RJ45 SL Jack, T568A or T568B - VIOLET
Cat 6 SL - White Cat 6 SL - Black Cat 6 SL plus Clipsal/HPM Adapter - White
Preferred ordering guide for NETCONNECT Australia 13
Q Back to contents page
Copper SolutionsCategory 6 U/UTP Products
Category 6 U/UTP Patch CordsMID Part Number Part Description Description
Patch cords have outside diameter of 5.97mm. Other colours and lengths available
NPC06UVDB-BL003F Cat6 RJ45 Patch Cord, Unshielded, CM (PVC), Blue, 3FT (1.0M)
NPC06UVDB-BL007F Cat6 RJ45 Patch Cord, Unshielded, CM (PVC), Blue, 7FT (2.0M)
NPC06UVDB-BL010F Cat6 RJ45 Patch Cord, Unshielded, CM (PVC), Blue, 10FT (3.0M)
NPC06UVDB-BL016F Cat6 RJ45 Patch Cord, Unshielded, CM (PVC), Blue, 16FT (5.0M)
NPC06UVDB-BL033F Cat6 RJ45 Patch Cord, Unshielded, CM (PVC), Blue, 33FT (10.0M)
NPC06UVDB-WT003F Cat6 RJ45 Patch Cord, Unshielded, CM (PVC), White, 3FT (1.0M)
NPC06UVDB-WT007F Cat6 RJ45 Patch Cord, Unshielded, CM (PVC), White, 7FT (2.0M)
NPC06UVDB-WT010F Cat6 RJ45 Patch Cord, Unshielded, CM (PVC), White, 10FT (3.0M)
NPC06UVDB-WT016F Cat6 RJ45 Patch Cord, Unshielded, CM (PVC), White, 16FT (5.0M)
NPC06UVDB-WT033F Cat6 RJ45 Patch Cord, Unshielded, CM (PVC), White, 33FT (10.0M)
Cat 6 U/UTP Patch Cord Cat 6 U/UTP Slimline Patch Cord Available Upon Request
Other colours available on request (BK=Black, GR=Green, GY=Grey, OR=Orange, RD=Red, YL=Yellow)
Preferred ordering guide for NETCONNECT Australia 14
Q Back to contents page
Complementary Copper SolutionsCopper Tools
Copper ToolsMID Part Number Part Description Description
1725150-6 SL Series Termination Tool - Includes Lacing Fixture
1673956-6 Lacing Fixture replacement for SL Series Termination Tool
1375308-1 110C Impact Tool with Extended-Life Blade
64172055-01 KRONE Connection Tool with Sensor - use on all KRONE style modules (Not suitable for SL Jacks)
2119000-1 Jacknack Cable Stripping Tool
Patch Panel AccessoriesMID Part Number Part Description Description
760238657 CPP-1U-E CommScope Patch Panel - Empty. Accepts 4 Modules. INCLUDES rear cable manager
760238658 CPP-BM-KIT-4PK CommScope Blank Faceplate - Black. Supplied in packet of 4
760238660 CPP-UDDM-SL-KIT-4PK CommScope Unshielded DDM for SL Jacks - Black. 6 x RJ45 Slots. Supplied in packet of 4
760238661 CPP-SDDM-SL-KIT-4PK CommScope Shielded DDM for SL Jacks, incl. Ground Kit - Black. Supplied in packet of 4
760175919 CPP-FCM-KIT CommScope Fiber Cable Management Kit
760229179 CPP-SVS-KIT CommScope Saddle & Velcro Strap Kit - Black. Supplied in packet of 4
Jacknack Stripping Tool 110 Impact ToolSL Series Termination Tool – with Lacing Fixture
Blank Faceplate Unshielded/ Shielded DDM for SL jacks
Fibre Cable Management Kit Patch Panel - Empty
Preferred ordering guide for NETCONNECT Australia 15
Q Back to contents page
Complementary Copper Solutions
Horizontal Cable ManagementMID Part Number Part Description Description
Loop style
760038240 HCM-19-SS-1U 4 Ring Metal Patch Cord Minder - Black - 80mm Loops. Includes cage nuts
Finger duct style, with cover
760072942 HTK-19-SS-1U 1RU Cable Manager Metal Finger Duct 75mm
760072959 HTK-19-SS-2U 2RU Cable Manager Metal Finger Duct 75mm
Adaptor ClipsMID Part Number Part Description Description
CommScope Adaptor Clips for PDL 500/600 Series
64671122-00 6467 1 122-00 PDL600 Adaptor Clip. White. Suitable for all Keystone/SL Style Jacks - includes labels and window clips
64671122-10 6467 1 122-10 PDL600 Adaptor Clip. Black. Suitable for all Keystone/SL Style Jacks - includes labels and window clips
CommScope Adaptor Clips for standard Clipsal/HPM
64671116-02 Adaptor Clip - White. Use to mount AMPTWIST and SL Jacks into Clipsal/HPM Faceplate Bag of 10
64671116-00 Adapter Clip - Black. Use to mount AMPTWIST and SL Jacks into Clipsal/HPM Faceplate Bag of 10
64671116-07SH Adaptor Clip - White. WITH SHUTTER. Use to mount AMPTWIST and SL Jacks into Clipsal/HPM Faceplate Bag of 10
1RU Cable Manager 4 Ring metal Patch Cord Minder
Clipsal/ HPM Style Adapter – Black/ WhiteShuttered Bezel
Preferred ordering guide for NETCONNECT Australia 16
Q Back to contents page
Complementary Copper Solutions
Surface Mount Outlets (SL Jacks Only)
MID Part Number Part Description Description
1-1116697-3 Surface Mount Module, 1-port, unloaded, White – Reduced Footprint (supports SL style Cat5e/6 UTP & C6A SLX FUTP Jacks)
1-1116698-3 Surface Mount Module, 2-port, unloaded, White – Reduced Footprint (supports SL style Cat5e/6 UTP & C6A SLX FUTP Jacks)
1933668-2 Surface Mount Module, 2-port, unloaded, Black – suit SL Jacks
1-1933668-3 Surface Mount Module, 2-port, unloaded, White – suit SL Jacks
1933671-2 Surface Mount Module, 4-port, unloaded, Black – suit SL Jacks
1-1933671-3 Surface Mount Module, 4-port, unloaded, White – suit SL Jacks
1933674-2 Surface Mount Module, 6-port, unloaded, Black – suit SL Jacks
1-1933674-3 Surface Mount Module, 6-port, unloaded, White – suit SL Jacks
FaceplatesMID Part Number Part Description Description
1-2111008-3 Face Plate Kit, 1 Port, Labelled, Alpine White
1-2111009-3 Face Plate Kit, 2 Port, Labelled, Alpine White
1-2111010-3 Face Plate Kit, 3 Port, Labelled, Alpine White
1-2111011-3 Face Plate Kit, 4 Port, Labelled, Alpine White
Surface Mount Boxes
1-2111008-3 1-2111010-31-2111009-3 1-2111011-3
Preferred ordering guide for NETCONNECT Australia 17
Q Back to contents page
Ceiling Connector Assembly (CCA). Field Terminated Plug Connector for Modified Permanent LinkMID Part Number Part Description Description
NOTE: CCA should be wired with T568B method to match patch cord wiring
760234921 CCA Connector Only (No Patch Cable). Use with Cat 5e/6/6A UTP Patch Cords Cut in Half
760235590 CCA Connector with Cat 6A LSZH UTP RJ45 Patch Cord. 450mm Long. White
HighBand Frame and Consolidation Point (for NETCONNECT UTP)MID Part Number Part Description Description
Terminate Using KRONE Connection Tool (64172055-01)
64501107-01 HIGHBAND Frame Kit, Cat 6A 12way, 240 pairs
64501103-10 HIGHBAND Frame Cable Management Kit
64502157-10 HIGHBAND Frame Cable Trough, TOP
64502157-20 HIGHBAND Frame Cable Trough, BOTTOM
64501105-21 HIGHBAND Consolidation Point, Cat 6A 100 pair
CCA Connector Only CCA Connector with Cat 6/ Cat 6a cable assembly
Complementary Copper Solutions
64501107-01 64502157-10 64501105-2164501103-10
Preferred ordering guide for NETCONNECT Australia 18
Q Back to contents page
Fibre Solutions
Fibre Optic Cables - Indoor Distribution Series (D-Series) MID Part Number Part Description Description
OM4 50/125um (3500/500 MHz.km) Internal Distribution Cable
760012153 N-006-DS-5K-FSUAQ OM4 50/125µm, Internal Riser Distribution Cable, OD 6mm, ULSZH, 6 core fibre
760012161 N-012-DS-5K-FSUAQ OM4 50/125µm, Internal Riser Distribution Cable, OD 7.5mm, ULSZH, 12 core fibre
760019117 N-024-DS-5K-FSUAQ OM4 50/125µm, Internal Riser Distribution Cable, OD 9.5mm, ULSZH, 24 core fibre
OS2 9/125um Internal Distribution Cable
760004242 N-006-DS-8W-FSUYL OS2 9/125µm, Internal Riser Distribution Cable, OD 6mm, ULSZH, 6 core fibre
760004267 N-012-DS-8W-FSUYL OS2 9/125µm, Internal Riser Distribution Cable, OD 7.5mm, ULSZH, 12 core fibre
760019075 N-024-DS-8W-FSUYL OS2 9/125µm, Internal Riser Distribution Cable, OD 9.5mm, ULSZH, 24 core fibre
Other colours available on request
Fibre Optic Cables
Preferred ordering guide for NETCONNECT Australia 19
Q Back to contents page
Fibre Solutions
Fibre Optic Cables - Outdoor/UndergroundMID Part Number Description
OM3 50/125um (1500/500 MHz.km) Gel-filled Loose Tube
64624473-06 OM3 50/125µm, Gel-filled Loose Tube Cable, OD 8.9mm, nylon, 6 core fibre
64624473-12 OM3 50/125µm, Gel-filled Loose Tube Cable, OD 8.9mm, nylon, 12 core fibre
OM4 50/125um (3500/500 MHz.km) Gel-filled Loose Tube
64624474-06 OM4 50/125µm, Gel-filled Loose Tube Cable, OD 8.9mm, nylon, 6 core fibre
64624474-12 OM4 50/125µm, Gel-filled Loose Tube Cable, OD 8.9mm, nylon, 12 core fibre
64624474-24 OM4 50/125µm, Gel-filled Loose Tube Cable, OD 8.9mm, nylon, 24 core fibre
OS2 9/125um Gel-filled Loose Tube
64624447-06 OS2 9/125µm, Gel-filled Loose Tube Cable, OD 8.9mm, nylon, 6 core fibre
64624447-12 OS2 9/125µm, Gel-filled Loose Tube Cable, OD 8.9mm, nylon, 12 core fibre
64624447-24 OS2 9/125µm, Gel-filled Loose Tube Cable, OD 8.9mm, nylon, 24 core fibre
64624447-48 OS2 9/125µm, Gel-filled Loose Tube Cable, OD 8.9mm, nylon, 48 core fibre
OS2 9/125um Gel-filled Loose Tube with Sacrificial Sheath
64624448-06 OS2 9/125µm, Gel-filled Loose Tube Cable, OD 12.1mm to 10.9mm. nylon, 6 core fibre, sac sheath
64624448-12 OS2 9/125µm, Gel-filled Loose Tube Cable, OD 12.1mm to 10.9mm. nylon, 12 core fibre, sac sheath
64624448-24 OS2 9/125µm, Gel-filled Loose Tube Cable, OD 12.1mm to 10.9mm. nylon, 24 core fibre, sac sheath
64624448-48 OS2 9/125µm, Gel-filled Loose Tube Cable, OD 12.1mm to 10.9mm. nylon, 48 core fibre, sac sheath
Other cables available on request
Fibre Optic Cables
Preferred ordering guide for NETCONNECT Australia 20
Q Back to contents page
Fibre Solutions
Rackmount Fibre Trays - 19"MID Part Number Description
FMS Fibre Tray - Front Patching Sliding Drawer Tray
OM4 (Backwards compatible with OM3) Fully Loaded Fibre Tray
4-2122146-2 1RU FMS Tray. Includes 6 x LC OM4 Duplex Adaptors (12F), 12 x OM4 LC Pigtails. 12 x Splice protectors. Splice tray and cable glands
4-2122146-3 1RU FMS Tray. Includes 12 x LC OM4 Duplex Adaptors (24F), 24 x OM4 LC Pigtails. 24 x Splice protectors. Splice trays (2) and cable glands
4-2122146-4 1RU FMS Tray. Includes 24 x LC OM4 Duplex Adaptors (48F), 48 x OM4 LC Pigtails 48 x Splice protectors. Splice trays (2) and cable glands
4-2122145-2 1RU FMS Tray. Includes 6 x SC OM4 Duplex Adaptors (12F), 12 x OM4 SC Pigtails. 12 x Splice protectors. Splice tray and cable glands
4-2122145-3 1RU FMS Tray. Includes 12 x SC OM4 Duplex Adaptors (24F), 24 x OM4 SC Pigtails. 24 x Splice protectors. Splice tray and cable glands
OS2 Fully Loaded Fibre Tray
3-2122146-2 1RU FMS Tray. Includes 6 x LC OS2 Duplex Adaptors (12F), 12 x OS2 LC Pigtails. 12 x Splice protectors. Splice tray and cable glands
3-2122146-3 1RU FMS Tray. Includes 12 x LC OS2 Duplex Adaptors (24F), 24 x OS2 LC Pigtails. 24 x Splice protectors. Splice trays (2) and cable glands
3-2122146-4 1RU FMS Tray. Includes 24 x LC OS2 Duplex Adaptors (48F), 48 x OS2 LC Pigtails. 48 x Splice protectors. Splice trays (2) and cable glands
3-2122145-2 1RU FMS Tray. Includes 6 x SC OS2 Duplex Adaptors (12F), 12 x OS2 SC Pigtails. 12 x Splice protectors. Splice tray and cable glands
3-2122145-3 1RU FMS Tray. Includes 12 x SC OS2 Duplex Adaptors (24F), 24 x OS2 SC Pigtails. 24 x Splice protectors. Splice tray and cable glands
QUICK-FIT Sliding Drawer Trays. Premium Enterprise Solution to Match QUICK-FIT Copper Panels
1-1671260-1 QUICK-FIT Fibre Optic Draw, Angled - 1RU (incl Rear Cable Management). Max 48 Fibres. Requires Gland Kit & Splice Trays
1-1671365-1 QUICK-FIT Fibre Optic Draw, Flush - 1RU (incl Rear Cable Management). Max 48 Fibres. Requires Gland Kit & Splice Trays
1671273-1 Cable Termination Kit for Two Cables incl Glands. or QUICK-FIT Drawer Trays
1671281-1 Splice Tray for 1-1671260-1 (fits 24 x 62mm SMOUV splice protectors). For QUICK-FIT Drawer Trays
Fibre Connectivity
1RU FMS Tray OM4 – 24f 1RU FMS Tray OS2 – 24f QUICK-FIT Draw - Angled
Preferred ordering guide for NETCONNECT Australia 21
Q Back to contents page
Fibre SolutionsFibre Connectivity
QUICK-FIT Modules Use with QUICK-FIT Sliding Drawer Trays
MID Part Number Part Description Description
1479698-1 QUICK-FIT Module, Blank
2111093-1 QUICK-FIT Module, 6 x RJ45 STP - Unloaded
1671201-3 QUICK-FIT Module, 12F, 6 x SC Duplex, OM4 - Aqua
1671196-3 QUICK-FIT Module, 12F, 6 x LC Duplex, OM4 - Aqua
1671202-3 QUICK-FIT Module, 24F, 6 x LC Quadplex, OM4 - Aqua
1671201-1 QUICK-FIT Module, 12F, 6 x SC Duplex, OS2 - Blue
1671202-1 QUICK-FIT Module, 24F, 6 x LC Quadplex, OS2 - Blue
1671196-1 QUICK-FIT Module, 12F, 6 x LC Duplex, OS2 - Blue
1671200-1 QUICK-FIT Module, 72F, 6 x MPO/ MTP Couplers
1711987-1 QUICK-FIT Module, 144F, 12 x MPO/ MTP Couplers
1671201-4 QUICK-FIT Module, 12F, 6 x SC Duplex, OS2 - Green
1671202-4 QUICK-FIT Module, 24F, 6 x LC Quadplex, OS2 - Green
QUICK-FIT Module - Blank QUICK-FIT Module – 6 x LC Quadplex QUICK-FIT Module 72f – 6 x MPO/ MTP
Preferred ordering guide for NETCONNECT Australia 22
Q Back to contents page
Fibre Solutions
Fibre Optic Patch CordsMID Part Number Description
Patchcord Multimode 50/125µm OM4 - LC/PC 2 FIBRE 1.8MM AQUA CORD - LSZH
2160046-1 Patchcord, OM4, LC, 2F, 1.0m
2160046-2 Patchcord, OM4, LC, 2F, 2.0m
2160046-3 Patchcord, OM4, LC, 2F, 3.0m
2160046-5 Patchcord, OM4, LC, 2F, 5.0m
1-2160046-0 Patchcord, OM4, LC, 2F, 10.0m
Patchcord Multimode 50/125µm OM4 - SC/PC 2 FIBRE 1.8MM AQUA CORD - LSZH
2160047-1 Patchcord, OM4, SC, 2F, 1.0m
2160047-2 Patchcord, OM4, SC, 2F, 2.0m
2160047-3 Patchcord, OM4, SC, 2F, 3.0m
2160047-5 Patchcord, OM4, SC, 2F, 5.0m
1-2160047-0 Patchcord, OM4, SC, 2F, 10.0m
Patchcord Singlemode 9/125µm - LC/PC 2 FIBRE 1.8MM YELLOW CORD - LSZH
2105028-1 Patchcord, OS2, LC, 2F, 1.0m
2105028-2 Patchcord, OS2, LC, 2F, 2.0m
2105028-3 Patchcord, OS2, LC, 2F, 3.0m
2105028-5 Patchcord, OS2, LC, 2F, 5.0m
1-2105028-0 Patchcord, OS2, LC, 2F, 10.0m
Patchcord Singlemode 9/125 - SC/PC 2 FIBRE 1.8MM YELLOW CORD - LSZH
2105092-1 Patchcord, OS2, SC, 2F, 1.0m
2105092-2 Patchcord, OS2, SC, 2F, 2.0m
2105092-3 Patchcord, OS2, SC, 2F, 3.0m
2105092-5 Patchcord, OS2, SC, 2F, 5.0m
1-2105092-0 Patchcord, OS2, SC, 2F, 10.0m
Fibre Patch Cords and Pigtails
Patch Cord OM4 – LC-LC Patch Cord OM4 –SC-SC
Preferred ordering guide for NETCONNECT Australia 23
Q Back to contents page
Fibre Optic Patch Cords MID Part Number Description
Patchcord Singlemode 9/125µm - LC/Angled 2 FIBRE 1.6MM YELLOW CORD – RISER/PVC
FEWLALA42-JXM001 Patchcord, OS2, LCA, 2F, 1.0m
FEWLALA42-JXM002 Patchcord, OS2, LCA, 2F, 2.0m
FEWLALA42-JXM003 Patchcord, OS2, LCA, 2F, 3.0m
FEWLALA42-JXM005 Patchcord, OS2, LCA, 2F, 5.0m
FEWLALA42-JXM010 Patchcord, OS2, LCA, 2F, 10.0m
Patchcord Singlemode 9/125 - SC/Angled 2 FIBRE 1.6MM YELLOW CORD - RISER/PVC
FEWSASA42-JXM001 Patchcord, OS2, SCA, 2F, 1.0m
FEWSASA42-JXM002 Patchcord, OS2, SCA, 2F, 2.0m
FEWSASA42-JXM003 Patchcord, OS2, SCA, 2F, 3.0m
FEWSASA42-JXM005 Patchcord, OS2, SCA, 2F, 5.0m
FEWSASA42-JXM010 Patchcord, OS2, SCA, 2F, 10.0m
Fibre SolutionsFibre Patch Cords and Pigtails
Other patch cords available on request
OS2 - SC-SC OS2 - LC-LC
Preferred ordering guide for NETCONNECT Australia 24
Q Back to contents page
Fibre Solutions
Fibre Optic PigtailsMID Part Number Description
OM4 Pigtails, 50/125µm, 1 Fibre, 900um, 1.5mtr, LSZH Tight Buffered Fibre
8-2104167-1 LC Pigtails, OM4, 1F, 1.5mtr - Pkt of 6 - Colour Coded
8-2104167-2 LC Pigtails, OM4, 1F, 1.5mtr - Pkt of 12 - Colour Coded
FAXSCUC0A-XXF005 SC Pigtails, OM4, 1F, 0.9mm, 1.5mtr - Pkt of 6
FAXSCUC0C-XXF005 SC Pigtails, OM4, 1F, 0.9mm, 1.5mtr - Pkt of 12
OS2 Pigtails, 9/125µm, 1 Fibre, 900um, 1.5mtr, LSZH Tight Buffered Fibre
FAWLCUC0A-XXF005 LC Pigtails, OS2, 1F, 0.9mm, 1.5m - Pkt of 6
FAWLCUC0C-XXF005 LC Pigtails, OS2, 1F, 0.9mm, 1.5m - Pkt of 12
FAWSCUC0A-XXF005 SC Pigtails, OS2, 1F, 0.9mm, 1.5mtr - Pkt of 6 - Colour Coded
FAWSCUC0C-XXF005 SC Pigtails, OS2, 1F, 0.9mm, 1.5mtr - Pkt of 12 - Colour Coded
OS2 Pigtails, 9/125µm, 1 Fibre, 900um, 1.5mtr, LSZH Tight Buffered Fibre
CY3922-000 Pigtail, A1, LCA, 1F, 1.5m Long, 900 Micron, Pkt of 12 Colour Coded
CZ6937-000 Pigtail, A1, SCA, 1F, 1.5m Long, 900 Micron, Pkt of 12 Colour Coded
Fibre Patch Cords and Pigtails
Other pigtails available on request
Pigtail OS2 – SC 1.5 metre Pack of 12
Preferred ordering guide for NETCONNECT Australia 25
Q Back to contents page
Fibre Solutions
Fibre Optic Splice ProtectorsMID Part Number Description
103897-000 Splice Protector, 45mm SMOUV (Bag of 100)
369305-000 Splice Protector, 62mm SMOUV (Bag of 100)
Fibre Optic Cleaning AccessoriesMID Part Number Description
2064500-1 LC One-Click Cleaner for Fibre Adaptors. Cleans over 500 connectors
2064499-1 SC One-Click Cleaner for Fibre Adaptors. Cleans over 500 connectors
1152057-6 MPO/ MTP One-Click Cleaner for Fibre Bulkheads. Cleans over 500 connectors
Splice Protector
SC/ LC One-Click Cleaner MPO/MTP Cleaner
Preferred ordering guide for NETCONNECT Australia 26
Q Back to contents page
Fibre Solutions
MPO/ MTP Patch Cable, 3.2mm OSD, LSZH, OM4, 12 Fibre - StraightMPO/MTP Patch cables are best suited for Data Centre environments or installed on dedicated pathways (FiberGuide)
MID Part Number Description
2160136-1 MPO to MPO Patch Cable OM4 12 Fibre LSZH, Indoor Straight - 1mtr
2160136-2 MPO to MPO Patch Cable OM4 12 Fibre LSZH, Indoor Straight - 2mtr
2160136-3 MPO to MPO Patch Cable OM4 12 Fibre LSZH, Indoor Straight - 3mtr
2160136-5 MPO to MPO Patch Cable OM4 12 Fibre LSZH, Indoor Straight - 5mtr
2160136-6 MPO to MPO Patch Cable OM4 12 Fibre LSZH, Indoor Straight - 6mtr
2160136-7 MPO to MPO Patch Cable OM4 12 Fibre LSZH, Indoor Straight - 7mtr
2160136-8 MPO to MPO Patch Cable OM4 12 Fibre LSZH, Indoor Straight - 8mtr
2160136-9 MPO to MPO Patch Cable OM4 12 Fibre LSZH, Indoor Straight - 9mtr
1-2160136-0 MPO to MPO Patch Cable OM4 12 Fibre LSZH, Indoor Straight - 10mtr
1-2160136-5 MPO to MPO Patch Cable OM4 12 Fibre LSZH, Indoor Straight - 15mtr
2-2160136-0 MPO to MPO Patch Cable OM4 12 Fibre LSZH, Indoor Straight - 20mtr
2-2160136-5 MPO to MPO Patch Cable OM4 12 Fibre LSZH, Indoor Straight - 25mtr
3-2160136-0 MPO to MPO Patch Cable OM4 12 Fibre LSZH, Indoor Straight - 30mtr
3-2160136-5 MPO to MPO Patch Cable OM4 12 Fibre LSZH, Indoor Straight - 35mtr
4-2160136-0 MPO to MPO Patch Cable OM4 12 Fibre LSZH, Indoor Straight - 40mtr
4-2160136-5 MPO to MPO Patch Cable OM4 12 Fibre LSZH, Indoor Straight - 45mtr
5-2160136-0 MPO to MPO Patch Cable OM4 12 Fibre LSZH, Indoor Straight - 50mtr
Pre-terminated Fibre
MPO to MPO Patch Cable
Preferred ordering guide for NETCONNECT Australia 27
Q Back to contents page
Fibre Solutions
MPO/ MTP Trunk Cables, Distribution Series Cable, 6.4mm OSD, LSZH, OM4, 12 Fibre - StraightTrunk cables best suited for Backbone cabling on common pathways
MID Part Number Description
1-2055576-0 MPO to MPO Trunk OM4 12 Fibre LSZH, indoor Straight 10mtr
1-2055576-5 MPO to MPO Trunk OM4 12 Fibre LSZH, indoor Straight 15mtr
2-2055576-0 MPO to MPO Trunk OM4 12 Fibre LSZH, indoor Straight 20mtr
2-2055576-5 MPO to MPO Trunk OM4 12 Fibre LSZH, indoor Straight 25mtr
3-2055576-0 MPO to MPO Trunk OM4 12 Fibre LSZH, indoor Straight 30mtr
3-2055576-5 MPO to MPO Trunk OM4 12 Fibre LSZH, indoor Straight 35mtr
4-2055576-0 MPO to MPO Trunk OM4 12 Fibre LSZH, indoor Straight 40mtr
4-2055576-5 MPO to MPO Trunk OM4 12 Fibre LSZH, indoor Straight 45mtr
5-2055576-0 MPO to MPO Trunk OM4 12 Fibre LSZH, indoor Straight 50mtr
5-2055576-5 MPO to MPO Trunk OM4 12 Fibre LSZH, indoor Straight 55mtr
6-2055576-0 MPO to MPO Trunk OM4 12 Fibre LSZH, indoor Straight 60mtr
6-2055576-5 MPO to MPO Trunk OM4 12 Fibre LSZH, indoor Straight 65mtr
7-2055576-0 MPO to MPO Trunk OM4 12 Fibre LSZH, indoor Straight 70mtr
7-2055576-5 MPO to MPO Trunk OM4 12 Fibre LSZH, indoor Straight 75mtr
8-2055576-0 MPO to MPO Trunk OM4 12 Fibre LSZH, indoor Straight 80mtr
8-2055576-5 MPO to MPO Trunk OM4 12 Fibre LSZH, indoor Straight 85mtr
9-2055576-0 MPO to MPO Trunk OM4 12 Fibre LSZH, indoor Straight 90mtr
9-2055576-5 MPO to MPO Trunk OM4 12 Fibre LSZH, indoor Straight 95mtr
9-2055577-9 MPO to MPO Trunk OM4 12 Fibre LSZH, indoor Straight 100mtr
Lengths available up to 300m on request
Pre-terminated Fibre
MPO to MPO Trunk Cable
Preferred ordering guide for NETCONNECT Australia 28
Q Back to contents page
Fibre Solutions
MPO/MTP Patch Cable, 3.8mm OSD, LSZH, OM4, 24 Fibre - StraightMPO/MTP Patch cables are best suited for Data Centre environments or installed on dedicated pathways (FiberGuide)
MID Part Number Description
2160304-1 MPO to MPO Patch Cord, OM4, 24 Fibre (Straight), Aqua - 1mtr
2160304-2 MPO to MPO Patch Cord, OM4, 24 Fibre (Straight), Aqua - 2mtr
2160304-3 MPO to MPO Patch Cord, OM4, 24 Fibre (Straight), Aqua - 3mtr
2160304-4 MPO to MPO Patch Cord, OM4, 24 Fibre (Straight), Aqua - 4mtr
2160304-5 MPO to MPO Patch Cord, OM4, 24 Fibre (Straight), Aqua - 5mtr
2160304-6 MPO to MPO Patch Cord, OM4, 24 Fibre (Straight), Aqua - 6mtr
2160304-7 MPO to MPO Patch Cord, OM4, 24 Fibre (Straight), Aqua - 7mtr
2160304-8 MPO to MPO Patch Cord, OM4, 24 Fibre (Straight), Aqua - 8mtr
2160304-9 MPO to MPO Patch Cord, OM4, 24 Fibre (Straight), Aqua - 9mtr
1-2160304-0 MPO to MPO Patch Cord, OM4, 24 Fibre (Straight), Aqua - 10mtr
1-2160304-5 MPO to MPO Patch Cord, OM4, 24 Fibre (Straight), Aqua - 15mtr
2-2160304-0 MPO to MPO Patch Cord, OM4, 24 Fibre (Straight), Aqua - 20mtr
2-2160304-5 MPO to MPO Patch Cord, OM4, 24 Fibre (Straight), Aqua - 25mtr
3-2160304-0 MPO to MPO Patch Cord, OM4, 24 Fibre (Straight), Aqua - 30mtr
3-2160304-5 MPO to MPO Patch Cord, OM4, 24 Fibre (Straight), Aqua - 35mtr
4-2160304-0 MPO to MPO Patch Cord, OM4, 24 Fibre (Straight), Aqua - 40mtr
4-2160304-5 MPO to MPO Patch Cord, OM4, 24 Fibre (Straight), Aqua - 45mtr
4-2160304-0 MPO to MPO Patch Cord, OM4, 24 Fibre (Straight), Aqua - 50mtr
Pre-terminated Fibre
Preferred ordering guide for NETCONNECT Australia 29
Q Back to contents page
Fibre Solutions
MPO/MTP Trunk Cables, Distribution Series Cable, 7.4mm OSD, LSZH, OM4, 24 Fibre - StraightTrunk cables best suited for Backbone cabling on common pathways
MID Part Number Description
2-2160301-0 MPO to MPO Trunk Cable, OM4, 24 Fibre (Straight), Aqua - 20mtr
2-2160301-5 MPO to MPO Trunk Cable, OM4, 24 Fibre (Straight), Aqua - 25mtr
3-2160301-0 MPO to MPO Trunk Cable, OM4, 24 Fibre (Straight), Aqua - 30mtr
3-2160301-5 MPO to MPO Trunk Cable, OM4, 24 Fibre (Straight), Aqua - 35mtr
4-2160301-0 MPO to MPO Trunk Cable, OM4, 24 Fibre (Straight), Aqua - 40mtr
4-2160301-5 MPO to MPO Trunk Cable, OM4, 24 Fibre (Straight), Aqua - 45mtr
5-2160301-0 MPO to MPO Trunk Cable, OM4, 24 Fibre (Straight), Aqua - 50mtr
5-2160301-5 MPO to MPO Trunk Cable, OM4, 24 Fibre (Straight), Aqua - 55mtr
6-2160301-0 MPO to MPO Trunk Cable, OM4, 24 Fibre (Straight), Aqua - 60mtr
6-2160301-5 MPO to MPO Trunk Cable, OM4, 24 Fibre (Straight), Aqua - 65mtr
7-2160301-0 MPO to MPO Trunk Cable, OM4, 24 Fibre (Straight), Aqua - 70mtr
7-2160301-5 MPO to MPO Trunk Cable, OM4, 24 Fibre (Straight), Aqua - 75mtr
8-2160301-0 MPO to MPO Trunk Cable, OM4, 24 Fibre (Straight), Aqua - 80mtr
8-2160301-5 MPO to MPO Trunk Cable, OM4, 24 Fibre (Straight), Aqua - 85mtr
9-2160301-0 MPO to MPO Trunk Cable, OM4, 24 Fibre (Straight), Aqua - 90mtr
9-2160301-5 MPO to MPO Trunk Cable, OM4, 24 Fibre (Straight), Aqua - 95mtr
9-2160345-9 MPO to MPO Trunk Cable, OM4, 24 Fibre (Straight), Aqua - 100mtr
Lengths available up to 300m on request
Pre-terminated Fibre
MPO to MPO Trunk Cable
Preferred ordering guide for NETCONNECT Australia 30
Q Back to contents page
Fibre Solutions
MPO/ MTP Patch Cable, 3.2mm OSD, LSZH, OS2, 12 Fibre - Straight MPO/ MTP Patch Cables are best suited for Data Centre environments or installed on dedicated pathway (FiberGuide)
MID Part Number Description
2160137-3 MPO to MPO Patch Cable, OS2, 12 Fibre (straight), Yellow - 3mtr
2160137-5 MPO to MPO Patch Cable, OS2, 12 Fibre (straight), Yellow - 5mtr
2160137-7 MPO to MPO Patch Cable, OS2, 12 Fibre (straight), Yellow - 7mtr
2160137-8 MPO to MPO Patch Cable, OS2, 12 Fibre (straight), Yellow - 8mtr
1-2160137-0 MPO to MPO Patch Cable, OS2, 12 Fibre (straight), Yellow - 10mtr
1-2160137-5 MPO to MPO Patch Cable, OS2, 12 Fibre (straight), Yellow - 15mtr
2-2160137-0 MPO to MPO Patch Cable, OS2, 12 Fibre (straight), Yellow - 20mtr
2-2160137-5 MPO to MPO Patch Cable, OS2, 12 Fibre (straight), Yellow - 25mtr
3-2160137-0 MPO to MPO Patch Cable, OS2, 12 Fibre (straight), Yellow - 30mtr
3-2160137-5 MPO to MPO Patch Cable, OS2, 12 Fibre (straight), Yellow - 35mtr
4-2160137-0 MPO to MPO Patch Cable, OS2, 12 Fibre (straight), Yellow - 40mtr
4-2160137-5 MPO to MPO Patch Cable, OS2, 12 Fibre (straight), Yellow - 45mtr
5-2160137-0 MPO to MPO Patch Cable, OS2, 12 Fibre (straight), Yellow - 50mtr
Pre-terminated Fibre
MPO-MPO Patch Cable
Preferred ordering guide for NETCONNECT Australia 31
Q Back to contents page
Fibre Solutions
MPO/ MTP Singlemode Pre-terminated Trunk Cables, Distribution Series Cable, LSZH, OS2, 12 Fibre - StraightTrunk cables best suited for Backbone cabling on common pathways
MID Part Number Description
2055711-5 MPO to MPO Trunk Cable, OS2 SM, LSZH, 12 Fibre, 5mtr
1-2055711-0 MPO to MPO Trunk Cable, OS2 SM, LSZH, 12 Fibre, 10mtr
1-2055711-5 MPO to MPO Trunk Cable, OS2 SM, LSZH, 12 Fibre, 15mtr
2-2055711-0 MPO to MPO Trunk Cable, OS2 SM, LSZH, 12 Fibre, 20mtr
2-2055711-5 MPO to MPO Trunk Cable, OS2 SM, LSZH, 12 Fibre, 25mtr
3-2055711-0 MPO to MPO Trunk Cable, OS2 SM, LSZH, 12 Fibre, 30mtr
3-2055711-5 MPO to MPO Trunk Cable, OS2 SM, LSZH, 12 Fibre, 35mtr
4-2055711-0 MPO to MPO Trunk Cable, OS2 SM, LSZH, 12 Fibre, 40mtr
4-2055711-5 MPO to MPO Trunk Cable, OS2 SM, LSZH, 12 Fibre, 45mtr
5-2055711-0 MPO to MPO Trunk Cable, OS2 SM, LSZH, 12 Fibre, 50mtr
5-2055711-5 MPO to MPO Trunk Cable, OS2 SM, LSZH, 12 Fibre, 55mtr
6-2055711-0 MPO to MPO Trunk Cable, OS2 SM, LSZH, 12 Fibre, 60mtr
6-2055711-5 MPO to MPO Trunk Cable, OS2 SM, LSZH, 12 Fibre, 65mtr
7-2055711-0 MPO to MPO Trunk Cable, OS2 SM, LSZH, 12 Fibre, 70mtr
7-2055711-5 MPO to MPO Trunk Cable, OS2 SM, LSZH, 12 Fibre, 75mtr
8-2055711-0 MPO to MPO Trunk Cable, OS2 SM, LSZH, 12 Fibre, 80mtr
8-2055711-5 MPO to MPO Trunk Cable, OS2 SM, LSZH, 12 Fibre, 85mtr
9-2055711-0 MPO to MPO Trunk Cable, OS2 SM, LSZH, 12 Fibre, 90mtr
9-2055711-5 MPO to MPO Trunk Cable, OS2 SM, LSZH, 12 Fibre, 95mtr
9-2055712-9 MPO to MPO Trunk Cable, OS2 SM, LSZH, 12 Fibre, 100mtr
Longer lengths available on request
Pre-terminated Fibre
MPO-MPO Trunk
Preferred ordering guide for NETCONNECT Australia 32
Q Back to contents page
Fibre SolutionsPre-terminated Fibre
MPO/ MTP Cassettes for Pre-terminated MPO/ MTP CablesMID Part Number Part Description Description
MPO/ MTP QUICK-FIT Cassettes - OM4 - For 12 Fibre MPO/ MTP Cables
Cassettes work with 12 fibre MPO/ MTP Cables. Not compatible with 24 Fibre MPO/ MTP Cables
1671227-5 MPO/ MTP cassette 24 fibres (6x LC Quad) – OM4 straight fibre. Accepts 2 x 12 fibre MPO cables
1-1671227-5 MPO/ MTP cassette 24 fibres (6x LC Quad) – OM4pair flipped fibre Accepts 2 x 12 fibre MPO cables
1671226-5 MPO/ MTP QUICK-FIT cassette 12 fibres (6x LC Duplex) – OM4 straight fibre
1-1671226-5 MPO/ MTP QUICK-FIT cassette 12 fibres (6x LC Duplex) – OM4 flipped fibre
1671228-3 MPO/MTP QUICK-FIT cassette 12 fibres (6 x SC Duplex) - OM3 straight fibre
1-1671228-3 MPO/MTP QUICK-FIT cassette 12 fibres (6 x SC Duplex) - OM3 flipped fibre
MPO/ MTP QUICK-FIT Cassettes - OM4 - For 24 Fibre MPO/ MTP Cables
Cassettes only work with 24 fibre MPO/ MTP Cables (not compatible with 12 fibre MPO/ MTP cables)
2160266-5 MPO/ MTP Cassette 12x LC Duplex (24 fiber) to 1 x 24f MPO – OM4 Straight
1-2160266-5 MPO/ MTP Cassette 12x LC Duplex (24 fiber) to 1 x 24f MPO – OM4 Flipped
MPO/ MTP QUICK-FIT Cassettes - OS2 Singlemode. LC
1671205-4 MPO/ MTP QUICK-FIT cassette 12 fibres (6x LC Duplex) – OS2 straight fibre
1-1671205-4 MPO/ MTP QUICK-FIT cassette 12 fibres (6x LC Duplex) – OS2 pair flipped fibre
1671206-4 MPO/ MTP QUICK-FIT cassette 24 fibres (6x LC Quad) – OS2 straight fibre
1-1671206-4 MPO/ MTP QUICK-FIT cassette 24 fibres (6x LC Quad) – OS2 pair flipped fibre
MPO/ MTP QUICK-FIT Cassettes - OS2 Singlemode. LC/Angled
1671206-6 MPO/ MTP QUICK-FIT cassette 24 fibres (6x LC/A Duplex) – OS2 straight fibre
1-1671206-6 MPO/ MTP QUICK-FIT cassette 24 fibres (6x LC/A Duplex) – OS2 pair flipped fibre
MPO/ MTP QUICK-FIT Cassettes - OS2 Singlemode. SC/Angled
1671207-6 MPO/ MTP QUICK-FIT cassette 12 Fibre (6 x SC/A Duplex) - OS2 straight fibre
1-1671207-6 MPO/ MTP QUICK-FIT cassette 12 Fibre (6 x SC/A Duplex) - OS2 flipped fibre
MPO/ MTP QUICK-FIT Cassettes - OS2 Singlemode. SC
1671207-4 MPO/ MTP QUICK-FIT cassette 12 Fibre (6 x SC Duplex) - OS2 straight fibre
1-1671207-4 MPO/ MTP QUICK-FIT cassette 12 Fibre (6 x SC Duplex) - OS2 flipped fibre
QUICK-FIT MPO/ MTP Cassette 24f – 6 x LC Quad QUICK-FIT MPO/MTP Cassette 12f – 6 x LC Duplex
Preferred ordering guide for NETCONNECT Australia 33
Q Back to contents page
Fibre SolutionsPre-terminated Fibre
AccessoriesMID Part Number Part Description Description
MPO/ MTP QUICK-FIT Couplers
1671200-1 QUICK-FIT Module, 72F, 6 x 12 Fibre MPO Coupler
1711987-1 QUICK-FIT Module, 144F, 12 x 12 Fibre MPO Coupler
Xtra-U Aerial Panel Holder. Use for Installing 19” Panels Above Cabinets/Racks
1-1671603-1 Xtra-U Panel Holder Kit (2RU) for Wire Mesh Cable Trays
1-1671603-2 Xtra-U Panel Holder Kit (4RU) for Wire Mesh Cable Trays
Xtra-U Subfloor Panel Holder Kit. Bracket Set to install 19" Panels in False Floor. Allows Gap up to 630mm Between Pillars
1671189-2 Xtra-U Subfloor Kit Panel Holder. 2RU
QUICK-FIT Blank Plate - Use to Cover Unused Ports
1479698-1 QUICK-FIT Module, Blank
MPO/ MTP Patch Panels - QUICK-FIT StyleMID Part Number Part Description Description
QUICK-FIT Panels also compatible with MRJ21 solution and SL Series RJ45 6-way inserts
760239401 CPPR-QF-1U-E QUICK-FIT Patch Panel, Recessed Angled - 1RU (includes Rear Cable Management)
760239400 CPP-QF-1U-E QUICK-FIT Patch Panel, Flush - 1RU (includes Rear Cable Management)
QUICK-FIT Patch Panel 1RU – Recessed Angled
QUICK-FIT Patch Panel 1RU - FlushLC Duplex
Xtra-U Aerial Panel Holder – 2RULC Quad Xtra-U Sub Floor Panel Holder – 2RU LC Duplex Xtra-U Cabinet Mount – 1 x CassetteDuplex
Preferred ordering guide for NETCONNECT Australia 34
Q Back to contents page
Fibre SolutionsG2 Modules
G2 Modules, MPO-LC, use with AGILE G2 Panels and DrawersMID Part Number Part Description Description
760242493 DM12-12LC-LS-A G2 MPOptimate® MPO-12 Distribution Module, 1x12F MPO pinned to 12F LC, Method A Pair Straight OM4, Aqua
760242494 DM12-12LC-LS-AF G2 MPOptimate® MPO-12 Distribution Module, 1x12F MPO pinned to 12F LC, Method A Pair Flipped OM4, Aqua
760242495 DM12-24LC-LS-A G2 MPOptimate® MPO-12 Distribution Module, 2x12F MPO pinned to 24F LC, Method A Pair Straight OM4, Aqua
760242496 DM12-24LC-LS-AF G2 MPOptimate® MPO-12 Distribution Module, 2x12F MPO pinned to 24F LC, Method A Pair Flipped OM4, Aqua
760242497 DM24-24LC-LS-A G2 MPOptimate® MPO-24 Distribution Module, 1x24F MPO pinned to 24F LC. Method A Pair Straight OM4, Aqua
760242502 DM24-24LC-LS-AF G2 MPOptimate® MPO-24 Distribution Module, 1x24F MPO pinned to 24F LC, Method A Pair Flipped OM4, Aqua
760242498 DM12-12LC-SM-A G2 G2 MPO-12 Distribution Module, 1x12F MPO pinned to 12F LC, Method A Pair Straight Singlemode, Blue
760242499 DM12-12LC-SM-AF G2 MPO-12 Distribution Module, 1x12F MPO pinned to 12F LC, Method A Pair Flipped Singlemode, Blue
760242500 DM12-24LC-SM-A G2 MPO-12 Distribution Module, 2x12F MPO pinned to 24F LC, Method A Pair Straight Singlemode, Blue
760242501 DM12-24LC-SM-AF G2 MPO-12 Distribution Module, 2x12F MPO pinned to 24F LC, Method A Pair Flipped Singlemode, Blue
G2 Modules, MPO-MPO, use with AGILE G2 Panels and Drawers760242723 360DP-6MPO-A G2 Distribution Adapter Pack, 6 x MPO, Method A
760242724 360DP-8MPO-A G2 Distribution Adapter Pack, 8 x MPO, Method A
Accessories
760242678 Patch cord fitting kit with 12 cable glands
760242679 Trunk fitting kit with 12 cable glands
760242369 QFIT-G2-ADPT-BRKT-4PK
UCP/Quick-Fit to G2 Adapter Bracket Kit (kit of 4)
760242493 760242723 760242678
Preferred ordering guide for NETCONNECT Australia 35
Q Back to contents page
Fibre SolutionsG2 Fibre Trays
AGILE G2 Rackmount Fibre Trays - 19”MID Part Number Part Description Description
Fixed and Sliding Panels
760241517 AGL-1U-FX 1U Fixed Panel, accepts (4) G2 modules or adapter packs, up to 48 DPX LC or 32 MPO ports
760241518 AGL-1U-ANG-FX 1U Fixed Recessed Angled Panel, accepts (4) G2 modules or adapter packs, up to 48 duplex LC or 32 MPO ports
760242453 AGL-1U-SL AGL 1U Sliding Panel, accepts (4) G2 modules or adapter packs, up to 48 DPX LC or 32 MPO ports
760242454 AGL-1U-ANG-SL 1U Sliding Recessed Angled Panel, accepts (4) G2 modules or adapter packs, up to 48 DPX LC or 32 MPO ports
Fixed and Sliding Drawers
760242455 AGL-1U-DRW-SL 1U Sliding Drawer Panel, accepts (4) G2 modules or adapter packs, up to 48 DPX LC or 32 MPO ports
760242475 AGL-1U-ENC-FX 1U Fixed Drawer Panel, accepts (4) G2 modules or adapter packs, up to 48 DPX LC or 32 MPO ports
760242476 AGL-1U-ENC-SL 1U Sliding Enclosed Panel, accepts (4) G2 modules or adapter packs, up to 48 DPX LC or 32 MPO ports
760241517 760242455
OFFICE LOCATIONS
SYDNEYSuite 103, Level 163 Parramatta RoadSilverwater, New South Wales 2128
MELBOURNELevel 1, 315 Ferntree Gully RoadMount Waverley, Victoria 3149
BRISBANELevel 1, 371 McArthur AveHamilton, Queensland 4007
PERTHUnit 7, 38 Colin StreetWest Perth, Western Australia 6005
CUSTOMER SERVICE
Phone: 1800 801 298 (Option 1)Email: [email protected]
TECHNICAL ASSISTANCE
Phone: 1800 801 298 (Option 2)www.commscope.com/support-tac
commscope.comVisit our website or contact your local CommScope representative for more information.
© 2019 CommScope, Inc. All rights reserved.
Unless otherwise noted, all trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope, Inc. This document is for planning purposes only and is not intended to modify or supplement any specifications or warranties relating to CommScope products or services. CommScope is committed to the highest standards of business integrity and environmental sustainability with a number of CommScope’s facilities across the globe certified in accordance with international standards, including ISO 9001, TL 9000, and ISO 14001. Further information regarding CommScope’s commitment can be found at www.commscope.com/About-Us/Corporate-Responsibility-and-Sustainability.
CO-113381-EN (03/19)
CommScope pushes the boundaries of communications
technology with game-changing ideas and ground-breaking
discoveries that spark profound human achievement.
We collaborate with our customers and partners to design,
create and build the world’s most advanced networks. It is our
passion and commitment to identify the next opportunity and
realize a better tomorrow. Discover more at commscope.com