precision gripper g14 + g25 precision...g14 + g25 precision gripper g14 + g25 with pull down effect...
TRANSCRIPT
-
312 SMW-AUTOBLOK
G14
t
6
14
12
ø11
85
ø12
10
19.3
t
15.8
ø15,6
85
ø16
G14 + G25
Precision gripperG14 + G25 with pull down effect
G14 (light duty version) material: hSS
G-gripper characteristics
■ Type g grippers have a stop surface for a controlled penetration of the grip tooth.
■ The workpiece is clamped concentric on the stop surface, so that the clamping dia. and the machining dia. are concentric.
■ The high precision of the gripper guarantees concenricity even after replacing worn out grippers.
■ highest torque transmission is guaranteed with the combination of friction and positive drive.
■ The geometry of the gripper creates a pull down effect on the workpiece.
■ TIN coated high speed steel for long life.■ you can select the corresponding gripper for all applications according to the grindstock allowance.
■ gripper with controlled penetration 0.070–0.30 mm are standard.
■ Special grippers are available on request.
con
trol
led
pene
trat
ion
tof
the
grip
too
thStop surface
SMW-AUTOBLOK Type G14-070 G14-100 G14-125 G14-150 G14-175 G14-200Controlled penetration t 0.070 0.10 0.125 0.15 0.175 0.20Id. No. 235615 235616 235617 235618 235619 235620
SMW-AUTOBLOK Type G25-100 G25-150 G25-200 G25-250 G25-300Controlled penetration t 0.10 0.15 0.20 0.25 0.30Id. No. 232704 231275 231276 231277 231278
Mounting dimension
Mounting dimensionG25 (heavy duty version) material: hSS
Dim
ensi
on t
o be
with
in +
0.0
1 m
mto
ton
gue
and
groo
ve/fi
ne s
erra
tion
Measured into sharp corner gripper g14fitted without clearance
carbide milling toolid. no. 139528
Dim
ensi
on t
o be
with
in +
0.0
1 m
mto
ton
gue
and
groo
ve/fi
ne s
erra
tion
Measured into sharp corner gripper g25fitted without clearance
carbide milling toolid. no. 139540
-
SMW-AUTOBLOK 31312
G15-150 G15-200 G15-25017 - 21
0.15 0.20 0.25235621 235622 235623
G15-150 G15-200 G15-25022 - 27
0.15 0.20 0.25237762 237763 237764
G15-150 G15-200 G15-25028 - 34
0.15 0.20 0.25235624 235625 235626
G15-150 G15-200 G15-25035 - 42
0.15 0.20 0.25237765 237766 237767
G15-150 G15-200 G15-25043 - 53
0.15 0.20 0.25235627 235628 235629
G15-150 G15-200 G15-25054 - 78
0.15 0.20 0.25237400 237401 237402
G15-150 G15-200 G15-25079 - 175
0.15 0.20 0.25237409 237410 237411
G15 + G30Ø
d
t
G15
14
12
t
6
ø11
85
ø12
Precision gripperG15 + G30 for highest torque transmission
G-gripper characteristics
■ Type g grippers have a stop surface for a controlled penetration of the grip tooth.
■ The workpiece is clamped concentric on the stop surface, so that the clamping dia. and the machining dia. are concentric.
■ The high precision of the gripper guarantees concentricity even after replacing worn out grippers.
■ highest torque transmission is guaranteed with the combination of friction and positive drive.
■ TIN coated high speed steel for long life.■ you can select the corresponding gripper for all applications according to the grindstock allowance.
■ gripper with controlled penetration 0.15–0.30 mm are standard.
■ Special grippers are available on request.
SMW-AUTOBLOK TypeWork piece-ØControlled penetration tId. No.
SMW-AUTOBLOK TypeWork piece-ØControlled penetration tId. No.
SMW-AUTOBLOK TypeWork piece-ØControlled penetration tId. No.
SMW-AUTOBLOK TypeWork piece-ØControlled penetration tId. No.
SMW-AUTOBLOK TypeWork piece-ØControlled penetration tId. No.
SMW-AUTOBLOK TypeWork piece-ØControlled penetration tId. No.
SMW-AUTOBLOK TypeWork piece-ØControlled penetration tId. No.
Mounting dimension
G15 (light duty version) material: hSS
Dim
ensi
on t
o be
with
in +
0.0
1 m
mto
ton
gue
and
groo
ve/fi
ne s
erra
tion
Measured into sharp corner
gripper g15fitted without clearance
carbide milling toolid. no. 139528
-
314 SMW-AUTOBLOK
G30-200 G30-250 G30-30024 - 32
0.20 0.25 0.30237841 237842 237843
G30-200 G30-250 G30-30033 - 42
0.20 0.25 0.30233481 233482 233483
G30-200 G30-250 G30-30043 - 52
0.20 0.25 0.30233421 233422 233423
G30-200 G30-250 G30-30053 - 64
0.20 0.25 0.30233485 233486 233487
G30-200 G30-250 G30-30065 - 84
0.20 0.25 0.30234811 234812 234813
G30-200 G30-250 G30-30085 - 119
0.20 0.25 0.30237291 237292 237293
G30-200 G30-250 G30-300120 - 174
0.20 0.25 0.30237299 237300 237301
G30-200 G30-250 G30-300175 - 335
0.20 0.25 0.30237422 237423 237424
19.3
15.8
t
10
(0.6)
R8.1
8.5(16.2)
10.3
M4
811 10
10.2
(19.3
)
ø15,6
85
ø16
Ø d
t
Dim
ensi
on t
o be
with
in +
0.0
1 m
mto
ton
gue
and
groo
ve/fi
ne s
erra
tion
Measured into sharp corner gripper g30
fitted without clearance
carbide milling toolid. no. 139540
G30 (heavy duty version) material: hSS
Mounting dimension
Precision gripperG30 for highest torque transmission
SMW-AUTOBLOK TypeWork piece-ØControlled penetration tId. No.
SMW-AUTOBLOK TypeWork piece-ØControlled penetration tId. No.
SMW-AUTOBLOK TypeWork piece-ØControlled penetration tId. No.
SMW-AUTOBLOK TypeWork piece-ØControlled penetration tId. No.
SMW-AUTOBLOK TypeWork piece-ØControlled penetration tId. No.
SMW-AUTOBLOK TypeWork piece-ØControlled penetration tId. No.
SMW-AUTOBLOK TypeWork piece-ØControlled penetration tId. No.
SMW-AUTOBLOK TypeWork piece-ØControlled penetration tId. No.
Chapter 00Chapter 01Chapter 02Chapter 03Chapter 04Chapter 05Chapter 06Chapter 07Chapter 08Chapter 09Chapter 10Chapter 11Chapter 12