precheck in - auto shipment = off. we start with the auto shipment set-up. auto shipment is off
TRANSCRIPT
PreCheck in - auto shipment = off
PreCheck in - auto shipment = off
We start with the auto shipment set-up.
Auto shipment is OFF.
PreCheck in - auto shipment = off
Stap 1
This is the car we are going to pre check in in the next step.
PreCheck in - auto shipment = off
Stap 2
As you can see, the car is not marked for auto shipment.
Druk op [Tab].
PreCheck in - auto shipment = off
Stap 3
Now we are going to make the pre check in.
Druk op [Tab].
PreCheck in - auto shipment = off
Stap 4
This is the check in branch as taken from the agreement.
BUG: We need a set up to define a default pick up branch.
Now we set pick up branch 777 by hand.
Klik in het veld.
PreCheck in - auto shipment = off
Stap 5
Desired situation: When pick up is selected as YES then the default pick up Branch is set as Check in Branch.
BUG: We need a set up to define a default pick up branch.
Klik op het lijstitem YYes.
PreCheck in - auto shipment = off
Stap 6
Now we enter the pick up postal code.
Question: Is it neede to set a location per postal code in the table? And how does Rentpro deal with more than one Pickup locations on the same postalcode?
Druk op [Tab].
PreCheck in - auto shipment = off
Stap 7
BUG: In the specifications we defined that Rentpro sets the Serving Branch automatically defined on the postal code (and not related to the location).
Laat de muisknop los.
PreCheck in - auto shipment = off
Stap 8
Now we get the selection list ans the right Serving Branch is shown.
This one should be set as servering Branch automatically.
Klik op de knop Select.
PreCheck in - auto shipment = off
Stap 9
BUG: The Transporter should also be set automatically.
Now a complete list of transporters is shown.
We choose transporter 2.Klik op de knop Select.
PreCheck in - auto shipment = off
Stap 10
Then we get a Invalid Tranporter message. This is a correct message based on the postal code settings.
Desired situation: We want Rentpro to set the Serving Branch and Tranporter based on the postal code matrix and the user is not allowed to change it.Klik in het veld.
PreCheck in - auto shipment = off
Stap 11
Now we choose transporter 1000 which is the right one.Druk op [Tab].
PreCheck in - auto shipment = off
Stap 12
Druk op [Tab].
PreCheck in - auto shipment = off
Stap 13
Druk op [Tab].
PreCheck in - auto shipment = off
Stap 14
Now we get a confirmation screen which is good.Klik op de knop Exit.
PreCheck in - auto shipment = off
Stap 15
Then the shipment is mailed as set up. Which is good.
PreCheck in - auto shipment = off
Stap 16
Klik op de knop OK.
PreCheck in - auto shipment = off
Stap 17
The agreement is pre checked in. And the shipment is created correct.
BUG:But the vehicle transaction is not updated right as you can see in the next frame.
Laat de muisknop los.
PreCheck in - auto shipment = off
Stap 18
BUG: The shipment is correct, but the vehicle transaction is not updated to the right destinations Branch.
Klik op het gewenste object.
PreCheck in - auto shipment = off
Stap 19
Shipment is pending. Which is good.
Schuif het object met het muiswiel.
PreCheck in - auto shipment = off
Stap 20
Shipment is send by mail (faxserver in our case) and received by the tranporter.
BUG: AAN: Inname locatie (destination branch) should be filled with AAN: <<Tranporter>>.
Laat de muisknop los.
PreCheck in - auto shipment = off
Stap 21
now we accept the shipment by hand.
Klik op het lijstitem AAccepted.
PreCheck in - auto shipment = off
Stap 22
And we get the question to send the pre_shipment mail.
BUG: This mail is not send, or not send by the correct mailserver.We should sent is with mailserver 2 (faxmailserver)
Klik op de knop Proceed.
PreCheck in - auto shipment = off
Stap 23
Klik op de knop Ja.
PreCheck in - auto shipment = off
Stap 24
Now it is finished.
Einde van procedure