precast civil precast tilt-up · bottom deck chairs the bottom deck chair has been designed to...

Solutions forP R E C A S T

C I V I L P R E C A S T

T I L T - U P

2

Parchem Construction Supplies brings together industry leading brands with a strong commitment to service and technical support.

Construction ProductsParchem offers a broad range of products and technologies to the civil engineering, industrial and commercial industries.

Equipment & ToolsSpecialising in light construction equipment, the innovative design and technical expertise make the range of products the leading choice for professional contractors.

Decorative Surfaces Whether building or renovating, the range of stamp, stencil, coloured concrete and internal flooring products provide innovative solutions to suit any house style or design.

Trade Stores The Parchem Construction Supplies stores offer not only convenient distribution for the complete Parchem product range but also provide a comprehensive range of additional product lines making it your complete trade store.

3

Introducing Conlift - a quality lifting system imported by Parchem. Conlift has been designed using cutting edge technology in the USA and provides value and a safer alternative to concrete lifting.

At Parchem we are not just a supplier of products, we pride ourselves on partnering with our customers in all facets of the construction industry, from engineering and drafting advice to planning, preparation, rigging, lifting and bracing, in a safe and efficient manner.

The advantages of ParchemThe major advantage Parchem offers over our competitors is the fact that we stock a comprehensive range of additional products. All products are available from one place through our trade stores making it easier for you to complete your projects on time every time.

At Parchem we work with our customers to ensure their needs are met with high quality products.

Parchem provides you with industry leading brands such as Flextool, Fosroc, Emer-Clad, Emer-Seal ....

We have convenient trade stores making it easier for you to get all the products you need from one convenient location.

CONLIFT IS A COMPREHENSIVE PRODUCT RANGE

SUITABLE FOR THE FOLLOWING

MARKETS:

PRECASTCIVIL PRECAST

TILT-UP

www.parchem.com.au

For more information about our product range go to www.parchem.com.au

4

SafetyAll products are strictly manufactured to industry standards. Our products have been designed to adhere to AS 3850.

ResponsibilityWe stand behind our products and our Parchem staff are extensively trained in all aspects of the Tilt-Up industry.

Project PlanningParchem offer a complete turn-key solution for your Tilt-Up project from our engineers, drafts-people to our technical sales people, we allow you to concentrate on your core business while we concentrate on ours.

INDEPENDENT ENGINEERING, DRAFTING ADVICE AND CERTIFICATIONOur skilled team of engineers can provide advice on Tilt-Up and Precast applications providing designs for lifting points, rigging and temporary bracing.

Our drafts people can provide shop drawings quickly and efficiently.

Our customer service representatives welcome your order and provide next day delivery.

We can provide the following services:• Shop drawing

• Project take off

• Product advice

• Daily delivery

INDUSTRY RESPONSIBILITY Our aim is to work with our customers in reducing risk through our industry experience and product performance.

5

Conten tsPreplanning 6

Working Panel Design Service 6

Lifting Design and Certification Service 6

Prop/ Bracing Design Service 6

Project Take Off Service 6

Ordering and Delivery 6

Casting Slab Preparation and Production 7-8

Set out tools 7

Reinforcing 7

Power Tools 7

Slab Underlay 8

Star Pickets 8

Mesh 8

Plastic Reinforcing, Mesh and

Ferrule Support Products 9-13

Slab on Ground Chairs 9

Clip on Mesh Support 10

Panel & Bar Chairs 10

Intersection, Rocket Chairs 11

Key Joint 12

Rebox 12

Formwork 12

Fillets & Mockjoints 12

Double Sided Tape 13

Shears 13

Xmas Trees 13

Formliners 13

Concrete Lifting Systems 14-15

Civil Precast 16-18

Ferrules and Accessories 19-21

Grout Tubes 22

Cast-in Plates 23

Polystyrene 23

Formwork 24

Chemicals 25

Curing Compounds 25

Form Release Agents 25

Sealants 26

Sprayers 26

Erection and Installation 27

Connections 27

Bracing of Panels 28

Levelling and Panel Placement 29

Lifting Plate 29

Panel and Building Completion 30-32

Grouting and Epoxy 30

Patching 30

Caulking 31

Waterproofing 32

Tools and Equipment 33

Notes Page 34-35

6

PREPLANNING

WORKING PANEL DESIGN SERVICEParchem provides a design service to produce Shop Drawings from the Engineers’ Drawings and Specifications.

LIFTING DESIGN AND CERTIFICATION SERVICEParchem provides a design service to produce Certified Lifting Designs for each Shop Drawing.

PROP/ BRACING DESIGN SERVICEParchem provides a design service to produce Certified Bracing & Deadman Designs for each Shop Drawing.

PROJECT TAKE OFF SERVICEThe experienced team at Parchem can provide a Project Take Off service to produce an economical product list to meet the requirements of the job.

ORDERING AND DELIVERYThe experienced team at Parchem Super Trade Stores will efficiently take your phone order or you can email or fax it through to your well stocked branch. For a delivery fee, your goods will be delivered the next day if the order is placed and stocked by 3pm the day before.

7

SET OUT TOOLSLasers

Measuring and Marking Markal B CrayonsSpray’N MarkTape MeasureChalk Line and ChalkString Lines – 50m, 100m, 500mCarpenters Pencils

CASTING SLAB PREPARATION AND PRODUCTION

REINFORCINGPerimeter Bar 16mm Deformed BarLaps 16mm Deformed Bar CornersCorner Reinforcing 16mm Deformed Bar 500mm long

Accessories Tie Wire Packs – 1.5kg Loop Tie Rolls 110mm, 125mm 150mm, 200mm Knipex Nippers Wire Twitchers Foundation Pegs 16mm x 600mm, 16mm x 900mm

POWER TOOLSGrinder – Electric and cordlessDriver Drill– Electric and cordlessHammer Drill– Electric and cordlessImpact Wrench– Electric and cordlessElectrical CordsAccessories

8

Slab Underlay The concrete underlay membrane will prevent moisture from penetrating beneath the slab. This prevents damage to internal floor coverings from rising damp and mould.The Polyethylene film that is used is made especially for the Australian building industry and conforms to Australian Standards AS2870, AS4347.6 and AS1326

Star Pickets Black & Galv

MeshRibbed square mesh - to AS4671

General Purpose Black has an Impact Resistance (IR) rating of IR2 for standard soil conditions. Orange IR3 has high impact resistance for areas of extreme soil movement.

Code Colour Size Thickness Pack Qty

GD-FILM Black IR2 4M X 50M 200Um 1

GD-FILMO633200 Orange IR3 6M X 33M 200Um 1

GD-FILMO450200 Orange IR3 4M X 50M 200Um 1

Code Description Pack Qty

BARG GUARD BAR 36mm BAR+S/PICKETS 100/BAG 100

WW-10751 STAR PICKET BLACK 450mm 400








WW-10764 STAR PICKET GALV 1350mm 400



WW-12201 STAR PICKET DRIVER 800mm 20

WW-12202 STAR PICKET DRIVER 1200mm 20

Other sizes, Colours (clear, black & orange) and thickness available

Code Product ID Length Width Longitudinal Wires Spacing Cross Wires Mass (kg) Pack Qty

MSSL53 SL53 6000 2300 4.75 300 4.75 16.35 SHT

MSSL63 SL63 6000 2300 6 300 6 21.9 SHT

MS3031 SL52 6000 2400 4.75 200 4.75 24.06 SHT

MS3001 SL62 6000 2400 6 200 6 33 SHT

MS3003 SL72 6000 2400 6.75 200 6.75 40.79 SHT

MS3010 SL81 6000 2400 8 100 8 104.6 SHT

MS3005 SL82 6000 2400 8 200 8 52.32 SHT

MS3006 SL92 6000 2400 8.55 200 8.55 65.52 SHT

MS3045 SL102 6000 2400 10 200 10 80.27 SHT

Stock lengths and processed bar available

9

PLASTIC REINFORCING, MESH AND SUPPORT PRODUCTS

CodeHeight

Pack QtyA B

BPDS15/20 15 20 100

BPDS25/30 25 30 100

BPDS35/40 35 40 100

BPDS45/50 45 50 100

Bottom Deck ChairsThe bottom deck chair has been designed to support both the bottom mesh and large bars in suspended decks, precast beams, panels and Tilt-Up applications.

Code Cover Pallet Qty

BSOG110C 110 3200

BSOG120C 120 2800

BSOG130C 130 2800

BSOG140C 140 2400

BSOG150C 150 2400

Packed in bags of 100, or bales of 1000.All dimensions are nominal and expressed in millimetres.

Slab on Ground Bar Chairs Tall

Code Size

RB-TH20 20 to 400mm

Base Plates (To suit Wire Chairs)

Wire Chair (3 & 4 Leg Plastic Tipped)

CodeCover

Pack QtyA B

BC25/40 25 40 100

BC50/65 50 65 100

BC75/90 75 90 100

BC85/100 85 100 100

Slab on Ground Chairs

Clip-on

SOG Clip-On

BA

Code Cover (A/B) Pack Qty

BC50/65C 50/65 100

Code Cover (A/B) Pack Qty

BCSOG50/65C 50/65 100

Code Size

RB-BP140 140mm

Code A B Pack Qty

BPDST65/75 65 75 50

BPDST90/100 90 100 50

BPDST110/120 110 120 50

BPDST130/140 130 140 50

BPDST150/160 150 160 50

BPDST170/180 170 180 50

BPDST190/200 190 200 50

Top Deck ChairsThe top deck spacer has been designed to support both top mesh and top reinforcing bars in suspended decks, thick precast and Tilt-Up panels and any tall spacer applications, where strength and stability is critical.

Code Cover Pack Qty

BCBASE130 130 x 2mm 100

BaseTurns the Top Deck Chair or BDK Chair into a slab on ground chair.

B

A

10

Code Cover Pack Qty

FCM20 20mm 100

FCM25 25mm 100

FCM30 30mm 100

FCM35 35mm 100

FCM40 40mm 100

FCM50 50mm 100

FCM60 60mm 100

FCM65 65mm 100

FCM75 75mm 100

Code Cover Pack Qty

FCMX25 25mm 100

FCMX30 30mm 100

FCMX50 50mm 100

FCMX60 60mm 100

FCMX65 65mm 100

FCMX70 70mm 100

Code Cover Pack Qty

FCBASE015 +15mm 100

FCBASE025 +25mm 100

Code Cover Pack Qty

FCBASE +2mm 100

Fast Clip On Mesh Supports Fcm’sA versatile range of fast clip-on chairs for mesh support. FCM’s are available in a wide range of cover sizes with extensions and bases to 170mm. The chair is designed to clip easily to the intersection of the mesh, providing greater strength and stability. ideal for tilt-slab, precast panel and suspended deck applications. Bases of both 15 or 25mm can be used to increase cover and stability and minimise exposure. Flat circular bases of 80mm diameter are also available for slab on ground applications.

Fast Clip On Mesh & Bar Chair Extensions

Bases (To Suit FCB’s and FCM’s)

Slab On Ground Bases

20 to 75mm

Code Pack Qty Pallet Qty

BCPANEL50/60 100 5000

BCPANEL65/75 100 5000

Panel ChairsHas been designed to support single layered mesh in Tilt-Up, precast panels and some suspended deck applications. The chairs provide covers of 50mm, 60mm and 65mm, 75mm to suit popular panel thicknesess of 100mm, 120mm, 130mm, 150mm and 170mm.

50 or 60mm

65 or 75mm

Pictured with base

15 to 25mm

60mm

Code Cover Pack Qty

FCB15 15mm 100

FCB20 20mm 100

FCB25 25mm 100

FCB30 30mm 100

FCB35 35mm 100

FCB40 40mm 100

FCB45 45mm 100

FCB50 50mm 100

FCB60 60mm 100

FCB65 65mm 100

FCB75 75mm 100

Fast Clip On Bar ChairsSmall Head 4mm - 20mm bar.

Cover

30mm

25 to 70mm

11

Order Code Colour CoverMass

per bag kg

STROCK15 Red 15 3.0

STROCK20 Green 20 3.5

STROCK25 Brown 25 4.0

STROCK30 Yellow 30 4.5

STROCK35 Blue 35 5.0

Rocket ChairsColour coded by height, this unique design clips firmly to the mesh in either horizontal or vertical applications to provide accurate cover. Ideal for use in pipes, tanks and a variety of concrete products.

The rocket chairs narrow base reduces exposure and can accommodate light mesh up to 5mm.

Packed in bags of 1000. All dimensions are nominal and expressed in millimetres

COVER

Code Height “h”

Mass kg Per 100

Pallet Qty

BDR025 25 16.3 2000

BDR030 30 17.5 1700

BDR035 35 19.0 1700

BDR040 40 20.0 1500

BDR045 45 21.5 1500

BDR050 50 22.6 1300

BDR055 55 24.1 1300

BDR060 60 25.4 1200

BDR065 65 26.5 1200

BDR070 70 27.9 1100

BDR075 75 29.1 1100

BDR080 80 30.4 1000

BDR085 85 31.7 1000

BDR090 90 33.0 900

BDR095 95 34.0 900

BDR100 100 34.5 900

All dimensions are nominal and expressed in millimetres. All sizes are packed in bags of 25 pieces.

Deck Rails

750mm

72mm

h

Single SpacersThe use of spacers manufactured from fibre concrete ensures that the concrete cover specified for structures and structural elements made from reinforced concrete is adhered to, both before and during concreting.

For specific requirements please contact our nearest store.

Code Bar A Bar B a b c

BHD30IN 16&12 16 12 30 20 46

BHD35IN 16&12 16 12 35 20 51

BHD60IN 16&12 16 12 60 45 76

BHD65IN 16&12 16 12 65 45 81

BHD30IN 16&16 16 16 30 20 46

BHD35IN 16&16 16 16 35 20 51

BHD60IN 16&16 16 16 60 45 76

BHD65IN 16&16 16 16 65 45 81

BHD30IN 12&12 12 12 30 20 42

BHD35IN 12&12 12 12 35 20 47

BHD60IN 12&12 12 12 60 45 72

BHD65IN 12&12 12 12 65 45 77

Intersection ChairsThe heavy duty intersection chair was designed for the precast industry and the production of “SuperT Beams”.

The result is a design that takes advantage of the intersection to provide a chair that does not move. Clipped to both bars at the intersection, the chair is amazingly secure and will not swivel or turn, ideal in vertical applications. The chairs are currently designed to accommodate combinations of Y16 bars and Y12 bars. Designed and manufactured from quality plastic for optimum performance, the new chairs have been load tested to exceed 200kg.

*Other bar combinations are available subject to minimum production requirements, ie. 12 &16. Packed in bags of 100, or in bales. All dimensions are nominal and expressed in millimetres.

a

Bar A

Bar B

45mm

c

b

12

Fillets and MockjointsFillet is plastic extruded lengths of triangles used to create a chamfer on the panel edge. Mockjoint is an extruded trapezoid shape that forms a false joint.

Code Description Norm Size (WxH) mm Length Pack Qty

AC112WH3000 Fillet 12x12 3000mm 25 lengths/pk

FWFIL12T Fillet with Tail 12x12 3000mm 25 lengths/pk

FWFIL15T Fillet with Tail 15x15 2500mm 40 lengths/pk

AC115WH3000 Fillet (19) 15x15 3000mm 25 lengths/pk

MOD136WH3000 Mockjoint 40x12 3000mm 20 lengths/pk

MOD136WH4000 Mockjoint 40x12 4000mm 20 lengths/pk

Key JointSacrificial metal stay in place keyjoint system for on ground slabs, sold in lengths only, priced per each, price includes stakes. Permanent capping for metal keyjoint system, available in a range of colours, sold in rolls only.

Rebox®

Rebox® is a floor to wall reinforcing bar joining system. Unique dimpled galvanised steel rebate box stays in place eliminating the need for scabbling. Reboxes are made to specification with either 12 and 16 mm reinforcement bars. The reinforcing bars comply with AS3600.

Inner Formwork - Door & Window Forming1.6 Galvanised flashing with 22mm chamfer. The depth is marginally narrower than the standard 150, 175 and 200mm depth to allow for screeding.

FormworkPanel forming extruded aluminium section that is used to form up panels, both in the Precast and Tilt-Up sectors. It has a 22mm chamfer and comes in 5.8m lengths.

13

Code Description Size Pack Qty

DST4964CM12 Double Sided Tape 12mm x 50M 18/Box







DSGS58R Double Sided Glue Spot Rnd 58mm

DSGS45S Double Sided Glue Spot Sq 45mm

Double Sided TapePremium grade cloth coated with an aggressive natural rubber solvent adhesive. Ideally suited for the temporary fixing of Mockjoint to concrete to ensure the Mockjoint does not move during pour. Tape removes cleanly & can be torn by hand.

Code Description

SH-3104N Sheffield Fillet Shears

SH-SH3104A Replacement anvil

SH-3104B Replacement blades

Fillet ShearsFillet Shears are used to cut the Fillet and Mockjoint. The base plate with angle lines helps to mitre the corners.

FormlinersPatterned moulds are reflected in the lower face of the panel.Various designs and sizes are available on request.


XMAS 6.5X36mm 100

Xmas Trees

14

CONCRETE LIFTING SYSTEMS

ConLift Face Lift Systems

Code To Suit Panel Thickness

Head Identification Box Qty

FLC5125 125mm Mushroom 16




UNI-FLA05125 125mm Mushroom 40




LER5 5T Remote Clutch

LE5 5T Clutch

ConLift Face Lifter (5 Tonne)

ConLift Plate Face Lifter (5 Tonne)

5T Face LifterLER5

LE5

LED57 Donut Clutch

ConLift Edgelift System

ConLift Edgelift Systems

ConLift Plate Edge Lift Anchor

Recess FormerBacking Plate

ConLift Donut Clutch 2-5T, 5-7, 10T

Code Description

EA25 Edgelift Plate Anchor Conlift 2.5T Galv

EA57 Edgelift Plate Anchor Conlift Orange 5-7T Galv

EA57M Edgelift Anchored Modified Orange 5-7T Galv

EA10 Edgelift Plate Anchor Conlift Blue 10T Galv

ConLift Edgelift Anchors

Code Description

RFRE25 RECESS FORMER RUBBER EDGELIFT 2.5T

RFRE57 RECESS FORMER RUBBER EDGELIFT 5-7T

RFRE10 RECESS FORMER RUBBER EDGELIFT 10T

RFBP25 RECESS FORMER BACKING PLATE 2.5T

RFBP5 RECESS FORMER BACKING PLATE 5T



ConLift Recess Formers And Backing Plates

Code Description

LEDC25 LIFTING EYE DONUT CLUTCH 2-5T CONLIFT

LEDC57 LIFTING EYE DONUT CLUTCH 5-7T CONLIFT

LEDC10 LIFTING EYE DONUT CLUTCH 10T CONLIFT

ConLift Clutches To Suit

15

Code Description Size

SBBN12 N12 900mm (90° at the apex, 90mm height of cog, 250mm flat leg)

SBBN16 N16 1675mm (90° at the apex, 90mm height of cog, 300mm flat leg)

Shear BarsInstalled across the edge anchor to increase shear load capabilities

dsi

dmin

L1

90°

50mm

Min 64 diam.pin typical

Min 64 diam.pin typical

M16 Bar

750mm

500mm

375mm 250mm


TBBN16500 N16 1000mm (64° at the apex, 500mm leg, 250mm leg separation)

TBBN16750 N16 1500mm (64° at the apex, 750mm leg, 375mm leg separation)

Tension Bars Installed through the second hole to increase tension load capabilities

16

ConLift Eye AnchorEye Anchors are lifted by a Mushroom Head Clutch and provide greater pullout strength due to the straight or bent tension bar that is threaded through the Ring at the base of the anchor. Suitable for low MPa concrete and thin elements.

ConLift Foot AnchorFoot Anchors are lifted by a Mushroom Head Clutch. Suitable for low MPa concrete and thin elements.

Code Description L B D H

EA1350 1.3T x 50mm Eye Anchor 50 10 19 10




EA5090 5T x 90mm Eye Anchor 90 19 36 18




Code Description L B D C

FA13045 1.3T x 45mm Foot Anchor 45 10 19 25














FA5075 5T x 75mm Foot Anchor 75 20 36 50









CIVIL PRECAST

L

L

H

B

D

D

C

B

17

ConLift Steel Recess Formers And Rubber Rings To SuitReusable steel recess formers that can be either magnetic or standard. Attached to the formwork to create the void around the head of the foot or eye anchor.

ConLift Articulated Steel Recess FormersReusable steel recess formers that open up to allow easy insertion of the anchor. Attached to the formwork to create the void around the head of the foot or eye anchor.

ConLift Lifting ClutchReusable steel clutches that engage on to the head of the foot or eye anchor. Mushroom Head appearance.

Code Description

LE13 1.3T LIFTING EYE

LE25 2.5T LIFTING EYE

LE5 5T LIFTING EYE

LE10 10T LIFTING EYE

LE20 20T LIFTING EYE

LE5R 5T LIFTING EYE (REMOTE RELEASE)

Code Description

RFR13 RECESS FORMER RUBBER 1.3T

WN13 WINGNUT AND STUD 1.3T FOR RFR

EAP13 PLATE 1.3T FOR RFR

RFR25 RECESS FORMER RUBBER 2.5T

WN25 WINGNUT AND STUD 2.5T FOR RFR

EAP25 PLATE 2.5T FOR RFR

RFR5 RECESS FORMER RUBBER 5T

WN5 WINGNUT AND STUD 5T FOR RFR

EAP5 PLATE 5T FOR RFR







ConLift Rubber Recess Formers / Wingnut/ Studs And PlatesReusable rubber recess formers that can be attached to the formwork to create the void around the head of the foot or eye anchor.

Rubber Recess Former

Steel Recess Former

Standard Remote Release

Recess Former Complete With Foot Anchor

Recess Former with rubber

Wingnut and Stud Complete Former with Foot Anchor Inserted

Code Description

RFS13 RECESS FORMER ROUND 1.3T STEEL

RFRR13 1.3T RUBBER RING

RFS25 RECESS FORMER ROUND 2.5T STEEL

RFRR25 2.5T RUBBER RING

RFS5 RECESS FORMER ROUND 5T STEEL

RFRR5 5T RUBBER RING

Code Description

RFSA13 RECESS FORMER STEEL ARTICULATED 1.3T

RFSA25 RECESS FORMER STEEL ARTICULATED 2.5T

RFSA5 RECESS FORMER STEEL ARTICULATED 5T

18

Panel PadsPanel pads are useful in spacing concrete panels and the like for purposes of curing, storage, packing and shipping.


PPAD Panel Pad 400

Code Description

DRR02 FOOT ANCHOR COVER PLATE 2.5T

DRR04 FOOT ANCHOR COVER PLATE 5T

Foot And Eye Anchor Cover Plates

Magnets

Code A B C

4CA14 14mm / 0.55” 160mm / 6.3” 80mm / 3.15”

5CA14 14mm / 0.55” 209.8mm / 8.26” 95mm / 3.74”

5CA18 17.8mm / 0.7” 220.5mm / 8.681” 95mm / 3.74

6CA14 14mm / 0.55” 268mm / 10.551” 120mm / 4.724”

6CA18 17.8mm / 0.7” 230mm / 9.055” 120mm / 4.724”

8CA18 17.8mm / 0.7” 312mm / 12.283” 171mm / 6.732

ConLift A-AnchorThe A-Anchor Lifting System is an economical system designed so that the anchor is used from the start of production to the placement on site of standard precast elements. Best of all without the need for any special lifting equipment or additional hardware. The use of a standard hook or clevis to connect the A-Anchor is all that is required for a safe lift. The A-Anchor eliminates through holes in precast elements.

ConLift Recess Formers To Suit A-Anchors

Product Code D E F

CRRF9014 228mm / 9” 76mm / 3” 82.55mm/3.25”

CRRF9018 228mm / 9” 76mm / 3” 82.55mm/3.25”

CRRF9014-4 228mm / 9” 76mm / 3” 101.6mm / 4”

CRRF9018-4 228mm / 9” 76mm / 3” 101.6mm / 4”

A-Anchor setting plate

Code Description

MAG50 MAGNET 50 x 15 x M12 x 1700 GAUSS

19


PC125 PRECAST CHAIR 125MM 200




Code Description Length Pack Qty

FECC34095 3/4 (Ferrules) 95mm 50

CB3465 3/4 (Bolt) 65mm 50

Coil Ferrules and Coil Bolts

FERRULES AND ACCESSORIES

Code Thread Length Thread Length Pack Qty

FEC12055 M12 55mm 20 100

FEC12095 M12 95mm 25 50

FEC16070 M16 70mm 32 25

FEC16095 M16 95mm 32 25

FEC20070 M20 70mm 35 25

FEC20095 M20 95mm 38 25

FEC24095 M24 95mm 50 25

ConFoot Ferrules Zinc, Galvanized and Stainless Steel

Code Thread Length Cross Hole to Suit

Thread Length

Pack Qty

FE12065 M12 65mm R8 20 50

FE12095 M12 95mm R8 25 50

FE16075 M16 75mm R10 32 50

FE16096 M16 96mm R10 32 50

FE20075 M20 75mm R10 35 50

FE20096 M20 96mm R10 38 50

Round Bar Ferrules Zinc, Galvanized and Stainless Steel

Zinc, Galvanized and Stainless Steel

Code Thread Min Thread Length Length To Suit

PanelPack Qty

FED16140 M16 32mm 140mm 150mm 25

FED16170 M16 32mm 170mm 175mm 25

FED16190 M16 32mm 190mm 200mm 25

FED20140 M20 38mm 140mm 150mm 25

FED20170 M20 38mm 170mm 175mm 25

FED20190 M20 38mm 190mm 200mm 25

Double Ended Ferrules

Precast ChairThe precast chair is used in conjunction with a 96mm CONfoot ferrule to produce the required height on the Near Face of a precast panel. It is concrete grey to blend in with the substrate and has small feet to limit exposure.

Requires N12 x 300 cross bars

Requires N12 x 300 cross bars

15mm

Code A B Pack Qty

FWSC125/96 125 96 50

FWSC150/96 150 96 50

FWSC175/96 175 96 50

FWSC200/96 200 96 50

Ferrule Support Chairs

B

A

Code Size

TICHAIR

ConBar Chairs

Codes Description Pack Qty

DBX12300 N12 x 300mm Deformed bar 20

Ferrule Cross Rods

20


TF1050 M10 x 50mm 100

TF1260 M12 x 60mm 100

TF1680 M16 x 80mm 100

TF16100 M16 x 100mm 100

TF2080 M20 x 80mm 50

Tube Ferrules

Crimped Cross-Hole Ferrules

Code Bar Type Length Pack Qty

CBR126 CB12 6 100

CBR166 CB16 6 100

CBR206 CB20 6 100

CBR256 CB25 6 100

CBR326 CB32 6 100

Code Foot Dia Length Pack Qty

CB12TI 38 100 75

CB16TI 50 118 30

CB20TI 64 148 25

CB25TI 80 191 6

CB32TI 101 201 5

Code Dia Length Hex AF

Pack Qty

CB12C 22 90 25 100

CB16C 30 102 30 60

CB20C 35 129 37 40

CB25C 43 180 45 20

CB32C 55 210 57 10

ConBar ReoContinuously threaded, hot rolled, Graded 500N reinforcing bar to AS4671. Achieves efficient continuous reinforcing throughout the whole job.

ConBar FerrulesInserts for casting into concrete, designed to accept Starter Bars with continuous ConBar thread at a later stage with sufficient embedment for a full strength bar break connection.

ConBar CouplersInternally threaded couplers for joining ConBar.

Cut to length or processed (Bent)

Note: Galvanised couplers available.

ConBar Antenna CapsDesigned to protect the threads on ConBar Couplers and Ferrules.

Code To suit ConBar Pack Qty

CB12NP CB12 100

CB16NP CB16 100

CB20NP CB20 100

CB25NP CB25 100

ConBar Nailing PlateConnects ConBar Couplers and Ferrules to formwork in facedown and horizontal applications.


TFB1260 M12 x 60mm 100

TFB1670 M16 x 70mm 100

TFB1690 M16 x 90mm 100

TFB2075 M20 x 75mm 50

TFB2090 M20 x 90mm 50

Codes Description

CB12WN CONBAR WING NUT CB12

CB16WN CONBAR WING NUT CB16

Bent End Ferrules

Conbar Wingnuts

Conbar Locknuts

Code Description

CB12N CONBAR LOCK NUT CB12






FWACRB12 CAP FOR CB12 100

FWACRB16 CAP FOR CB16 100

CB20AC CAP FOR CB20 100

Code Length Pack Qty

CBSB12540 540 100

CBSB16660 660 100

CSSB20850 850 100

CBSB251150 1150 100

CBSB321450 1450 100

ConBar Starters BarsPre-cut bar connections for fast full strength reinforcing. Grade. 500N bar to AS4671.

21

Codes Colour Pack Qty

FWNP12 Red 100

FWNP16 Green 100

FWNP16A Lime Green 100

FWNP20 Blue 100

FWNP20A Lime Green 100

FWNP20C Brown 100

FWNP24 Yellow 100

Screw In Thick Nailing Plate – Nail OnScrews into the ferrule and mechanicallyfastened to the formwork. Popular sizes arealso available with built-in antennae for easylocation of plates after casting. Where coilthreaded ferrules are used at bracing locations, a special nailing plate is available.

A=Available with buit in antenna.C=Suits coil thread.

Codes Colour Size Pack Qty

FWGP12 Red 12mm 100

FWGP16 Green 16mm 100

FWGP20 Blue 20mm 100

FWGP24 Yellow 24mm 100

Glue-on PlatesConnects to formwork with double sided glue spots and screws into ferrule. The recess on the bottom side of the base allows for easy removal after the panels have been lifted.

Codes Pack Qty

FWFCAP20 100

Codes Colour Pack Qty

FWQF12 Red 100

FWQF16 Green 100

FWQF20 Blue 100

Ferrule Quick Fit LocatorPushes into the ferrule and releases when the panel is lifted. A special built-in seal prevents slurry leakage into the ferrule. The 45mm square base can be nailed, or will accommodate double sided tape, which can be cut from standard strips and Glue on Squares.

Ferrule Patch CapsConcrete grey patches that are inserted into 20mm ferrules, when props have been removed from the panels. Eliminates grouting of the ferrule holes, even if the ferrules are not perpendicular to the panel face


GSPOT 58mm Dia (Approx) 1000

GSQ 45mm x 45mm 1000

Glue-on Spots & StripsStrong double sided adhesive approximately 1mm thick. Comes complete with backingstrips to allow pre-fixing to plates and locators.

Codes Colour Height Pack Qty

FWAC12 Red 12mm 100

FWAC16 Green 16mm 100

FWAC20 Blue 20mm 100

FWAC24 Yellow 24mm 100

Antenna CapsDesigned to protect the threads of ferrules while pouring and screeding while providing an effective seal through a tight push fit and a ridge which locks.

Code Description

FWPLATEBL BLUE 60/BAG

FWPLATEBR BROWN 60/BAG

FWPLATEG GREEN 60/BAG

FWPLATEO ORANGE 60/BAG

FWPLATER RED 60/BAG

FWPLATEW WHITE 60/BAG

FWPLATEY YELLOW 60/BAG

Panel Identification PlatesCast into panels for clear identification, specifications and quality control details. Available in several colours. 100 x 180mm.

22

Code Diameter Length Size Qty

SD4025 40 2500 576L/Pack

SD5025 50 2500 360L/Pack

SD6025 60 2500 330L/Pack

SD7525 75 2500 169L/Pack

SD8025 80 2500 144L/Pack

SD9025 90 2500 121L/Pack

SD4058 40 5800 576L/Pack

SD5058 50 5800 360L/Pack

SD6058 60 5800 330L/Pack

SD7558 75 5800 169L/Pack

SD8058 80 5800 144L/Pack

SD9058 90 5800 121L/Pack

FWPL50/60 Brown cap for 50 or 60mm 100

FWPCAP50 Blue cap for Ext 50mm 100

FWPL50 Red cap for Int 50mm 100

FWCAP50E Yellow cap for elbow 100

BFF5088 90° Elbow to suit 50mm Spiral Duct 100

SDE200 45° ELBOW to suit 50mm Spiral Duct 50

Metal Spiral Duct Grout Sleeve System*


GT100EXT 100mm grout tube extension 100

GT200EXT 200mm grout tube extension 130

GTBC Universal Chair 200

GTEC Grout Tube End Cap 600

Moulded Plastic Grout Tubes Black Plastic Ribbed grout Tube System.250mm formed body and elbow. To suit 125, 150, 175, 200mm panel.

* Note: Also available in 2200mm length sizes.

Universal Chair

End Cap100mm Extention 200mm Extention

PVC Elbow

SDE200


GT120 Formed Grout Tube Body and Elbow 120 Panel 100




DonutsTo restrain the grout filling the Grout Tube

Code Size

2500640 120mm OD x 60mm ID x 45mm Thick

23

Code Description Height Plate Dimensions Bars Ferrule

CIPD202012 D Stirrup Cast In Plate 73mm above plate -85mm overall 200 x 200 x 12mm 2 N16 -

CIPD202012F1 D Stirrup Cast In Plate & Ferrule 73mm above plate -85mm overall 200 x 200 x 12mm 2 N16 M20 x 55mm Ferrule

CIP0202012LEG Edge Cast In Plate - 200 x 150 x 12mm 2 N16 x 300 Legs -

CIP0202012F1LEG Edge Cast In Plate & Ferrule - 200 x 150 x 12mm 2 N16 x 300 Legs M20 x 55mm Ferrule

Cast-in Plates

Manufactured to your Specifications.


TP73108 Styrene Strips 120 x 145 x 2400 80

The 120mm side suits 150mm Panel thickness leaving 30mm of concrete cover

The 145mm side suits 175mm Panel thickness leaving 30mm of concrete cover

2201090 1.4 x 1.2m Sheets 10, 20, 50, 100mm

Styrene Pieces and Shapes are used to create Recesses and Architectural Detail

PolystyreneThe Styrene strip supports the Inner Formwork. The 30mm of concrete cover allows the downward face of the Panel above does not reflect the cutout. It is marginally shorter than the Edge Formwork so that it does interfere with the screeding and does not reflect in the Panel above. Styrene is also used to create rebates, angles and recesses

24

Code Description Size Lengths Pack Qty

LVLTF09504736 LVL 95 x 47mm 3600mm, 4800mm, 5400mm, 6000mm 88




Formply

LVL

FORMWORK

More timber sourced on enquiry


PLY2412172F14 F14 good Two Sides 2400 x 1200 x 17mm 48

PLY1812172F14 F14 good Two Sides 1800 x 1200 x 17mm 46

PLYAF241217F17 F17 Good Two Sides 2400 x 1200 x 17mm 50



25

CHEMICALS

Code Size

SFRWB20 19L

SFRWB1000 1041L

ConLift Water Based Precast Steel Form ReleaseSteel to concrete release agent. Water based.

Concure X90 Promotes efficient cement hydration minimises shrinkage whilst increasing durability of the concrete surface. Concure X90 is suitable for curing all freshly laid concrete either smooth or textured, indoors or outdoors. Coverage 5m²/L.

CURING AGENT

Concure A99Water based acrylic curing compound – conforms to AS3799. Concure A99 is recommended for applications to the surfaces of concrete structures, including renders, structural and mass concrete, particularly in situations where other conventional means of wet curing are difficult to maintain. Coverage 5m²/L.

Code Size

900909 20L

909900 205L

900910 1000L

Code Size

SFRSB20 19L

SFRSB205 208L

ConLift Solvent Based Form ReleaseSteel to concrete releaseagent. Solvent based.

Code Size

900801 205L

900802 1000L

Code Size

BBWB20 19L

BBWB205 208L

ConLift Bondbreaker - Water BasedConcrete to concrete release agent. Curing agent as well. Water based.

26

Silicone/Gap FillerSealing of joints to prevent leakage.


610332 Hilastic 88 Translucent Silicone 300gms

630100 Emerseal Silicone Grey 600ml

600395 White acrylic gap filler 300ml

Code Description

MH-SP20A 8 Ltr Polyethlene tank

MH-SP322 13 Ltr Polyethlene tank

MH-SP35C 13Ltr Polyethlene tank

SA6007 Chapin Premium Sprayer

AC4095 Dema 8Ltr Handheld Foamer

Curing Compounds: SP35CForm Release Agents: SP322/SP35CForm Oil: SP322/SP35CDiesel: SP322/SP35COil-based Sealers: SP35CWater-based Sealers: SP35CAcid Etching: SP20AMuriatic Acid: SP20 APhosphoric Acid: SP20AViscous Materials: SP20ABack Set: AC4095

Code Size

AC4093 500ml

AC4094 5Ltr

Back-SetTurns hard set up cement back into rinsable mud!Back-Set molecularly breaks down the ionic bond in Portland cement, completely dissolving and releasing the hardened cement from any surface to which it is adhered. Use Part # AC4095 Dema 8 Litre Handheld Foamer for applying

27


DB16500 N16 500

DB16600 N16 600

DB20500 N20 500

DB20600 N20 600

Code Description Size Holes

FJP304210 Flat Joining Plate 300 x 420 x 10mm 4

FJP154210 Flat Joining Plate 150 x 420 x 10mm 2

CJP20203013 Corner Joining Plate 200 x 200 x 13 x 300mm 4 (2 in each face)

CJP20201513 Corner Joining Plate 200 x 200 x 13 x 150mm 2 (1 in each face)

BJ151512 Base Joining Plate 150 x 150 x 12 x 150mm 2 (1 in each face)

Code Type Description

TILT-STDG Standard Bracket (2 required) Formed 100 x 10 Grade 250 flat bar with 5 slots

TILT-CNRG Corner Bracket (1 required) Formed 100 x 10 Grade 250 flat bar with 4 slots


SB12595 N12 595mm 20

SB16595 N16 595mm 20

SB20595 N20 595mm 20

Joining Plates for Panel to Panel Connection

Danley Tiltlock

Manufactured to your requirements. Galv & Black




Starter Bars Dowels to connect the panel to the slab, floor or stairs. They are deformed bar cut to length with a metric thread formed on one end. The thread is screwed into a ferrule cast into the panel and the remainder of the dowel is held in the slab, floor or stair concrete pour.

CONNECTIONS

ERECTION AND INSTALLATION

Code Description Size Box Qty

WSQMZ166552 M16 65 50

WSQMZ206552 M20 65 50


B88MZ160602 M16 60 50

B88MZ200602 M20 60 50

Square Plate Washers Bolts (Set Screws)Galvanized, Zinc and Black Galvanized, Zinc and Black

Accessories

DowelsDowels to hold the panel in place on the footing using the grout tube void. They are deformed bar cut to length and epoxied or cast-into the footings.

28

Push Pull Brace Hire

Strongback Hire

BRACING OF PANELS


JB20400 M20 J Bolt M20 x 400


PW-PBI18-20/115 ANCHOR PBI Brace-IT M12x115mm 25

PW-PBI20-20/115 ANCHOR PBI Brace-IT M14x115mm 25


PW-PSA15-10/90 ANCHOR PBI structural M10x90mm 25








FECC34095 Coil Ferrule 3/4" thread x 95mm 50

CB3465 Coil Bolt 3/4 thread x 95mm 50


FE20096G Propping Ferrule M20 x 95mm 50

B88MZ200602G Set Screw M20 x 60mm 50

Prop BoltStructural Mechanical Anchors that are fixed into either the Deadman, Slab or Footing to form the connection at the base of the Brace and into the Panel to form the connection at the top of the Brace.

Coil Ferrule and BoltA Coil Ferrule is cast into either the Deadman, Slab or Footing and a Bolt with the matching thread is wound in to it to form the connection at the base of the Brace. A Coil Ferrule is cast into the Panel and a Bolt with a matching thread is wound in to it to form the connection at the top of the Brace.

PSA – Structural anchor Designed for structural applicationA Coil Ferrule is cast into either the Deadman, Slab or Footing and a Bolt with the matching thread is wound in to it to form the connection at the base of the Brace. A Coil Ferrule is cast into the Panel and a Bolt with a matching thread is wound in to it to form the connection at the top of the Brace.

Standard Ferrule and Set ScrewA Standard Ferrule is cast into either the Deadman, Slab or footing and a set screw is wound in to it to form the connection at the base of the Brace. A Standard Ferrule is cast into the Panel and a Set Screw is wound in to it to form the connection at the top of the Brace.

J BoltsRound or Deformed Bar Formed into a J with a Metric thread on the end for a Nut. They are cast into the Deadman and form the connection at the base of the Brace.

Manufactured to your requirements

Never drill deeper than 80% of the Panel thickness

Galvanised and Black

Code Description Length Closed Open Weight

TPPROP –MINI PROP HIRE MINI (35 -25kN) 2.6 to 4.4M 35kN 30kN 37kg

TPPROP-STANDARD PROP HIRE STANDARD (40 -14kN) 4.4 to 6.8M 40kN 14KN 53kg

TPPROP-STANDARD 1 PROP HIRE STANDARD 1 (40 -18kN) 4.35 to 7.0M 40kN 18kN 55kg

TPPROP-JUMBO PROP HIRE JUMBO (25 -6kN) 6.2 to 10.0M 25kN 6kN 78kg

TPPROP-JUMBO 1 PROP HIRE JUMBO 1 (30 -20kN) 6.4 to 11.5M 30kN 20kN 106kg

Code Description

TPSSX91800 STRONGBACK HIRE 1.8M



29

LEVELLING AND PANEL PLACEMENT

Code Panel Shim Thickness Colour Pack

Size

SHIM01 1mm Brown 100

SHIM02 2mm Blue 200

SHIM03 3mm Green 100

SHIM05 5mm Yellow 100

SHIM10 10mm Black 40

SHIM15 15mm Grey 40

SHIM20 20mm White 30

Shims Uniquely designed for packing underneath concrete tilt-up and precast panels having a non-skid surface. and tested with compressive loads of up to 20 tonnes.

Lifting PlateAvailable for Hire when a Face Lift Anchor is incorrectly placed, not cast in or is misplaced. It is rated at 5T and is fixed to the Panel in the certified position of the missing Anchor with 4 PBI18/102.

Tools and EquipmentHammer, Sledge HammerScrewdriverLadderFerrule Magnet to find Ferrules, Anchors and Plates in the concrete panelPower leadPower Board

300mm

Lifting Plate 20mm thick

20mm

100mm

26mm20mm

50mm

50mm

22mm

300m

m

40mm

Panel BarSprung steel blade gives additional leverage when moving a panel

Code Length

CPBAR 1425mm

Code Length

LP 300 x 300 x 20mm

Size: 150 x 100mm

30

GROUTING AND EPOXY

PATCHING

Accessories Hand TrowelsSander – Electric and Hand ToolSand PaperScrapers

PANEL AND BUILDING COMPLETION

Code Description

481015 Nitomortar 903 size 1.5 and 3L

620460 Nitomortar AP size 3L

620463 Nitomortar AP Base 15L pak

620464 Nitomortar AP Hardener 15L pak

ConLift GroutGeneral Purpose, Non-Shrink, Cementitious Grout is used to fill the voids, gaps and grout tubes.

2 Part Epoxy Resin BinderTwo component Eproxy for bonding, anchoring and repair.

Code Description Bag Size

302020 Renderoc HB40 20kg


302000 Renderoc FC 3mm 20kg


209015 Grey 10kg

209010 White 10kg

ConLift ConPatchA Light Weight One Pass Patching Mortar.

High Build MortarNon Sag Mortar for patching deeper concrete holes minimum thickness 10mm.

Fairing Coat MortarA Feather Mortar to cover 0-3mm holes and to blend repair mortar into the Panel.

Code Description

209000 Non Shrink Grout 20kg

31

CAULKING

Code Description Width Roll Length

665120 Expanda Foam Rod 6mm 250m







665127 Expanda Foam Rod 40mm 2m/strip

665128 Expanda Foam Rod 50mm 2m/strip

665200 Emer-Seal Backing Rod 16mm x 150m Roll 20 Lengths/bale




665204 Emer-Seal Backing Rod 50mmx 20m Roll 15 Lengths/bale

Code Description Fire Rating Size Box Qty

620525 Emer-Seal PU25 Non 600ml 20

620600 Emer-Seal PU40 Non 600ml 20

620035 Flamex PU Yes 600ml 12

620025 Flamex One Acrylic Yes 600ml 20

600406 Emer-Seal Acrylic Non 10L Each

600407 Acrylic Non 600ml 20

Accessories

Cartridge Gun

Manual Sausage Gun

Batter Operated Sausage gun

Bulk Loading Gun

Bondfree – Chemical for removing Bondbreaker

Backer Rod

Foam to support the Polyurethane or Acrylic Jointing material in the Panel Joint.Expanda Foam Rod: Medium density, closed cell polyethylene foam backing rod for foaming joint profile and general joint filling, sold per roll, priced per roll. White in colour.Emer-Seal backing Rod: Low density , open cell polyurethane backing rod, sold per roll, priced per roll. Orange in colour.

Polyurethane & AcrylicsFire Rated / Non Fire Rated UV Resistant One Component Joint Sealant. 320gm Cartridge, 600ml Sauage, 10L Pail

Code Description Box Qty

PW-SF600 Powerfoam 750ml Can 1

PW-TF600 Triggerfoam 750ml 1

PW-TFCLEANER Triggerfoam cleaner 500ml 1

PW-SFNOZZLES Powerfoam Nozzles Packs 5

Expanding Foam

Code Description Box Qty

PW-TFTOOL Triggerfoam tool 1

PW-TFTOOLDIS Triggerfoam tool Disposable 1

Triggerfoam Tools for Expanding Foam

TFTOOL TFTOOLDIS

SF600 TF600 TFCLEANER

32

Code Size

561452 4L

561785 15l

Emer-Acrylic SealerWaterbased acrylic copolymer used as a primer/sealer on concrete, brick, titl-up panels etc.

Supercast Hydrofoil SectionsCentre bulb sections are used in expansion, contraction and construction joints. The centre bulb allows for movements in a structure to be accommodated whilst its hexagonal design provides a flat surface. This allows shuttering and joint fillers to fit snugly. Intersections available.

WATERPROOFING

Supercast Rearguard “S”Selection incorporates a flat top centre box which allows movement to be accomodated in expansion joints. The box also provides a seating to support joint fillers. Intersections available.

Supercast Rearguard “R”Plain web sections which are placed externally for use in contraction and costruction joints. They incorporate a central fin to assist setting out shutter location. Intersections available.

Conseal Waterstop Conseal 231 is the perfect product for sealing non-moving joints in pre-cast structures or between in-situ pours and existing concrete applications. It does not depend on moisture activation to work as its mechanical properties depend on the bond to each side of the joint and not the expansion of the product itself. 50mm of cover required.

Superswell Waterstop Superswell 47B is an economical product for sealing less critical In-situ joints that must be water tight. Superswell 47B is recommended for us in non-movement joints eg horizontal constructio joints between floor slabs and cast in situ walls such as lift overrun pit, retaining walls and similar.


2500240 Conseal 231 19 x 12 x 12mm

2500240 Conseal 231 25 x 25 x 12mm


2201110 Superswell 47B 25 x 20mm

2500935 Superswell 19 x 12 x 12mm

Hydrotite Waterstop Hydrotite is a hydrophilic waterstop which exhibits excellent durability and water sealing capacity. It expands as it absorbs water and fills up concrete joint gaps confirming to the gap variation, ensuring excellent sealing. Hydrotite is based on tehnology of hydrophilics, a material which expands in a controlled fashion by approximately eight times by volume in presence of moisture to create a pressure seal within the joint.

7mm

25mm

Expansion Delay Coating

Hydrophilic Rubber (Blue)Chloroprene Rubber (Black)

EmerClad Waterproof CoatingOne component waterbased acrylic liquid membrane for waterproofing roofs, facades, balconies and wet areas. 3sqm per litre per coat. 4ltr & 15ltr Matt & Satin. Can be tinted upon request.

33

TOOLS & EQUIPMENT

Pumping PortaPumpFlexshaft Submersible Trash PumpsDrive UnitsClose Coupled Engine Drive PumpsElectric Submersible Pumps 12 VoltElectric Submersible Pumps 240 Volt

Concrete Power Screeding Power ScreedVibratory Double Beam ScreedVibratory Truss Screed

Sawing & Cutting Brick & Masonry SawsFloor & Road SawGreen Concrete SawDemolition SawsDiamond Blades

Power Equipment Air CompressorsGeneratorsPressure WashersCircular SawsDrillsMixersVentilating Fans

Drilling, Breaking, ChisellingBreakersHammer DrillsPoints, ChiselsAccessories

Concrete Hand Finishing Hand ToolsHand ScreedsBull FloatsHardware Tools

Surface Preparation Surface ScarifierSurface Scarifier - Cutter CagesSurface Scarifier - AccessoriesSurface Cutters/Tungsten CutterConcrete Grinder & AccessoriesShot BlastingScarifyingGrindingScraping

Concrete VibratorsPorta Vibe Petrol Concrete VibratorsBackpack VibratorsHeavy Duty Concrete VibratorsHeavy Duty Vibrator AccessoriesElectric Concrete VibratorsPneumatic Concrete VibratorsPneumatic External Vibrators

Compaction Plate Compactors - ForwardPlate Compactors - ReversibleTamping Rammers

Concrete Power FinishingWalk-Behind Power TrowelsRide-On Power TrowelsBump Cutter, Channel Float, Check RodPan Floats, Trowel Blades

34

NOTES

35

NOTES

P R E C A S T C I V I L P R E C A S T T I L T - U P

National Head Office7 Lucca Road,

Wyong, NSW 2259

T: (02) 4350 5000

www.parchem.com.au

precast civil precast tilt-up · bottom deck chairs the bottom deck chair has been designed to...

Documents