PRECAST

Email: estimation@gulfprecast.ae website: www.gulfprecast.ae

Abu Dhabi (Head Office)P.O. Box 44495, ICAD1Tel: +971 2 550 2044Fax: +971 2 550 2344

Dubai:P.O. Box 19302 DIP.Tel: +971 4 885 1033Fax: +971 4 885 1016

Iraq:Hay Alwahda - Aqaba Bin NafiSq. District 904, St. # 15Bldg. 72, Baghdad.Tel: +964 7708 957 173

CO

NT

EN

TS

Introduction 03

Advantages of Precast 05

Advantages of Prestressed 07

Sequence of typical Precast/Prestressed projects 09

Typical Projects 13

2Gulf Precast

PRECAST

Precast Concrete is the ideal choice for construction worldwide, thanks to its versatility, economy and speed of construction. Combining the strength and durability of Concrete with

the flexibility and aesthetics of Precast elements, it is one of the most economical and attractive construction solutions available.

Precast Concrete offers numerous benefits as well as a wide range of products, from architectural cladding in many shapes, sizes, colours and finishes, to large

Prestressed structural elements, to complete building systems.

Gulf Precast is one of the leading manufacturers of Precast and Prestressed Concrete components in the Gulf Region since 1984.

With its policy of constant innovation and improvement in manufacturing techniques, performance and properties of products, as well as strict Quality

Assurance in a factory environment, Gulf Precast provides owners, builders, designers and specifiers with almost endless creative

possibilities.

By implementing strict Health, Safety and Environement controls, Gulf Precast is contributing continuously to a greener, healthier and more

sustainable environment.

INTRODUCTION

3 Gulf Precast

INTRODUCTION

INTRODUCTION

4Gulf Precast

ADVANTAGES OF PRECAST

1. Factory engineered products under strict quality control: Precast Concrete is made of cement combined with natural

materials: coarse aggregate, sand, cement and water, all of which are produced in an environmentally friendly manner.

Precast Concrete production takes place under strictly controlled conditions in a factory; this results in enhanced consistency of product quality, together with safer working conditions and reduced impact on the environment.

2. High performance, Quality and Durability: Precast Concrete elements are produced

under strict quality control to the highest international standards, ensuring their durability, strength and appearance.

3. Wide Choice of Finishes: Whether off-form, smooth or textured, with

contrasting exposed aggregates or slightly etched and pigmented, Precast Concrete surface finishes offer a rich and varying array of possibilities, allowing greater freedom and creativity.

5 Gulf Precast

ADVANTAGES OF PRECAST

4. Flexibility of forms and shapes: With Precast Concrete, Architects and

Designers can give full reign to their imagination allowing all sorts of decorative patterns, reveals, cornices, recesses and curvatures in their design.

6. Economy and speed of Production: Precast Concrete elements are mass produced

with minimum manpower in the shortest possible time. Their remarkable qualities - Strength, Durability and Insulation - offer significant savings in construction costs, energy consumption and later maintenance costs.7. Fast and Efficient

installation: The use of standardized

Precast Concrete elements contributes to efficient and fast installation, significantly reducing construction time.

Assembly of large and complex components can be carried out easily and quickly, producing little or no dust, noise or waste, as well as fostering a faster return on investment.

Moreover, good quality control in the factory prevents unnecessary delays, and just-on-time deliveries reduce the need for storage at the construction site.

5. Superior Heat and Sound Insulation: Precast Concrete Sandwich panels,

with their dense concrete and incorporated middle insulation layer, offer a far superior heat and sound Insulation than traditional construction systems, which means substantial energy savings and a healthier environment.

ADVANTAGES OF PRECAST

6Gulf Precast

In addition to the Advantages listed previously for Precast, Prestressed Precast Systems offer the following added features:

2. Light economical construction: Prestressing and high strength concrete make it

possible to use less material to achieve similar load-bearing capacity and, hence, make substantial cost savings in both reinforcement and concrete. Reduced section sizes lead to lower dead loads and can improve transport.

1. Long spans: Prestressing of the Precast elements

means longer and more efficient spans, allowing large, open spaces and reducing the number of columns and beams in the structure.

ADVANTAGES OF PRESTRESSED

7 Gulf Precast

ADVANTAGES OF PRESTRESSED

3. High load capacity: Precast Prestressed elements can carry much

heavier loads as compared to normal reinforced concrete structures, which makes them ideal for heavy load bearing structures such as tunnels, bridges, car parks, reservoirs etc.

4. Minimum propping & scaffolding: Precast Prestressed elements need

very little propping or formwork, leading to cost saving and greater access all through the work areas.

ADVANTAGES OF PRESTRESSED

8Gulf Precast

430

100

1660

160

4350

3700

160

4160

160

6440

1475

2325

3655

1800

10019401150

160

12602400

1960 3240

4780

3835

3835

1520

1920100

4040

1370

2550

5410

1001500

3935

160

2660160

2060 1340 1000 850 600 850 950 850 600 850 1000

4500

455

660

1600 2695 850 10252230160018608501160850500

1500

660

100

555 850 555

5095 47

4030

70

4950

150

950 2260 950

600

600

600

1000

+4000mm FFL

+3975mm FFL

+2025mm FFL @ 171.05mm

+3925mm FFL

150

430

W4 C1

S1F5

W4 C1

S1F5

W4 C1

S1F5

W4 C1

S1F5

W4 C1

S1F5

W4 C7

S1F5

W1 C7

-F8

W1 C7

-F8

W1 C7

-F8

W4 C1

S3F9

W1 C7

-F8

W4 C1

S1F5

W5 -

S1F10

D3

W1a

D3 D3

D3

W1a W1a W1a W1a

W1aW1aW1a

W4W4

W2 W2

D4

D4

D4

W5

W7

300

600100

3

A 202

+4000mm FFL

+4000mm FFL

+4000mm FFL

+4000mm FFL

+4000mm FFL

+4000mm FFL

W2

2000

2000

2100

1500

800

1400

2000

2000

2000

2000

3275

1350

7360

1340555850555

5255

300

5200

430

C U P B O A R D

C U P B O A R D

BEDROOM - 33700 x 3935

BEDROOM - 25200 x 4350

MASTER BEDROOM5410 x 4040

T &B 42550 x 1800

W.I.C1920 x 1475

T & B 31920 x 2325

LIVING ROOM4160 x 3835

HALLWAY4160 x 1660

BEDROOM - 16440 x 3655

T &B 52400 x 1660

BALCONY

BALCONY

F-DBTJB

SHAFT

Timber Hand Rail overCast Aluminium Grill

C U

P B

O A

R D

DN

01 02 03 04 05 06 07 08 09 10 11

A

B

E

F

H

J

G

C

3000 860 1500 2890 2970 1225 2475 990

20040

20340

2105

1670

150

4125

450

430

12435

12735

D

19202210

2005

1500

150

150

01 02 03 04 05 06 07 08 09 10 11

A

B

E

F

H

J

G

C

3000 860 1500 2890 2970 1225 2475 990

20040

20340

2105

1670

150

4125

450

430

12435

12735

D

19202210

2005

1500

150

150 150

20-09-11 1:50 102

PAL TECHNOLOGYP.O. Box 34036, Abu Dhabi UAE

MAIN DESIGN & BUILD CONTRACTOR :

DATE BLOCK SCALE DRAWING #

900 @ A1 A -

DRAWING TITLE :

PLOT NO : LOCATION :

28-01-900-920

PROJECT DESCRIPTION

PROJECT NAME AND LOCATION

AIN AL FAYDABLOCK : 900,JABAL HAFEETAL AIN, UAE.

2000 [ G+1] RESIDENTIAL VILLAS

EMIRATI HOUSING DEVELOPER :

TOTAL AREA & RATIO BUILT :

CLIENT :

CONSULTANT STAMP : NORTH ARROW :

SECTION STAMP :

No. DATEDESCRIPTION CHECK APRV

NOTES:-

ALL DIMENSIONS ARE IN mm. UNLESS STATED OTHERWISE.

THIS DRAWING IS A COPYRIGHT OF P.A.C.E AND MUST NOTBE COPIED, RETAINED OR USED WITHOUT WRITTENAUTHORITY FROM P.A.C.E.

1.

2.

DESIGN & SUPERVISION CONSULTANT:

MAIN DEVELOPER :

Professional ArabianConsulting Engineers LLCP.O. Box 34036, Abu Dhabi UAE

PROJECT MANAGERS :

AIN AL FAYDA EMIRATI HOUSINGPROGRAMME - PHASE 1

= 0.449

= 405.196 SQ.M / 4361.52 S.FT

= 901 SQ.M / 9698.27 S.FT

FLOOR AREA RATIO

TOTAL BUILT-UP AREA

TOTAL PLOT AREA

VILLA TYPE - 2A FIRST FLOOR PLAN

DISCLAIMER:FURNITURE SHOWN IS NOT PART OF THIS CONTRACTSSCOPE OF WORKS. THE LAYOUT SHOWN IS INDICATIVE ONLY.

R 0 ISSUED FOR APPROVAL 19-06-2011

R 1 ISSUED FOR APPROVAL 24-07-2011

R 2 ISSUED FOR APPROVAL 20-09-2011

1. Design and Shop Drawings

2. Mould preparation

SEQUENCE OF TYPICALPRECAST/PRESTRESSEDPROJECTS

9 Gulf Precast

SEQUENCE OF TYPICAL PROJECTS

3. Stressing of strands (for Prestressed components)

4. Casting

SEQUENCE OF TYPICAL PROJECTS

10Gulf Precast

5. Quality assurance checks

6. Lifting and storage

SEQUENCE OF TYPICAL PROJECTS

11 Gulf Precast

7. Transport to site

8. Erection at site

SEQUENCE OF TYPICAL PROJECTS

12Gulf Precast

13 Gulf Precast

High Rise Buildings

TYPICAL PROJECTS

TYPICAL PROJECTS

14Gulf Precast

Residential Villas

TYPICAL PROJECTS

15 Gulf Precast

Schools

Mosques

TYPICAL PROJECTS

16Gulf Precast

Expo 2000, Hannover, Germany

TYPICAL PROJECTS

17 Gulf Precast

Boundary Walls

PRECAST

Email: estimation@gulfprecast.ae website: www.gulfprecast.ae

Abu Dhabi (Head Office)P.O. Box 44495, ICAD1Tel: +971 2 550 2044Fax: +971 2 550 2344

Dubai:P.O. Box 19302 DIP.Tel: +971 4 885 1033Fax: +971 4 885 1016

Iraq:Hay Alwahda - Aqaba Bin NafiSq. District 904, St. # 15Bldg. 72, Baghdad.Tel: +964 7708 957 173