pre & fine filter test rig

4
FEC R World Class Filter Testing Equipments An ISO 9001 Certified co. Pre, Fine & Hepa Filter Test Rig

Upload: fec2020

Post on 13-Apr-2017

117 views

Category:

Automotive


0 download

TRANSCRIPT

Page 1: Pre & Fine filter test rig

FEC R

World Class Filter Testing EquipmentsAn ISO 9001 Certified co.

Pre, Fine & Hepa Filter Test Rig

Page 2: Pre & Fine filter test rig

1 www.fecproduct.com

Latest Air Filter Testing System Without / With Dust Particle System. Test rig upgrade according to EN 779 and Asher 52.2. Schematic Diagram for air filter test system as per BS EN 779 S.S 304 Grade.

Flow rate : 600 to 6000 cfmDifferential Pressure : DigitalTest Aerosol : Salt / DOPLoading dust : Ashrae test dust, ISO12103-A2 and ISO 12103-A4Filter samples : Pocket and cassette filters with max Dimensions 610x610mm (other filter also can be test)Flat sheet filter media : Also can be test as on per order requestAir supply : min. 5 barDust feeder : Special designed for dispense the dust

FEC offer the air filter test rig as per international standard various type of capacity 6,000 cfm other higher capacity is also available on customer demand we can test on this equipment life & efficiency test, dust holding capacity, Pressure restriction test, Pressure drop, flow etc as per EN 779 Test Standard.

Test object• Dust feed device• Mixer orifice• Perforated plate• Final filter• Measuring device for pressure loss•

Set up for determination of synthetic dust weight arrestance

Technical Spcification

Set up for determination of synthetic dust weight arrestancePart 1

Part 2Set up for determination of atmospheric dust spot efficiency

Test object• Dust feed device• Mixer orifice• Perforated plate• Final filter• Measuring device for pressure loss• Measuring device for volume flow•

Measuring device for volume flow• Flow straightener• Fan• Timer• Volume tester meter• Temperature and relative humidity of test air•

Page 3: Pre & Fine filter test rig

2www.fecproduct.com

Flow straightener• Fan• Probe (sampling tube)• Timer• Volume tester meter• Vacuum pump• Temperature and relative humidity of test air•

The teat rig suitable for test the air filter test according to standard EN 779 and ASHRE 52.2 below men-tion parameters you can test

Flow rate V/S differential pressure• Dust holding capacity• Efficiency of filter and restriction pressure• The filter samples can be easily installed into the rotatable and movable filter housing• The test duct is divided info 6 duct sections and fabricated air proof. • Suction part duct side and blower outside• The pressure measuring facilities in duct section up stream and down stream digital sensor• Butter fly valve for set the desired flow and pressure• Flow measuring device imported digital sensor with digital will be attached in duct •

Flow rate V/S Diffrential pressure• Over Pressure Aerosol DetectionDOP / PAO Test • The filter samples can be easily installed into the movable filter housing.• The test duct is divided into 4 duct sections and fabricated airproof.• Suction part duct side and blower outside • Imported Differential pressure measuring on operating panel duct section up stream and • down stream digital sensorButter fly valve for set the desired flow and pressure• Flow measuring device imported digital sensor with display will be attached in duct •

The Test Rig suitable for test the air filter test according to your mention List

Page 4: Pre & Fine filter test rig

ISO 9001:2008 Certified.

Some Our Valued Customers

Sales Office: 9A, Gurudwara Road, Hari Vihar (Kakraula), Opp. Metro Poll No. 816, New Delhi 110043 (INDIA)

Correspondence Address : Plot No. 35, K-1 Extn., Bank Wali Gali Gurudwara Road, Mohan Garden, Uttam Nager, Delhi-110059

Cell - 9811478874, 9212912990E-Mail : [email protected] / [email protected] : www.fecproduct.com

Our pursuit to perfection in all the spheres of businesses has fueled the rapid growth of the company and its acceptance worldwide. We have successfully garnered the trust and goodwill of the most reputed clients from both govt. & Private Sectors. We believe in maintain-ing an ever-lasting relationship with our clients by offering them maximum benefits through best quality of products and service.