practica en autocad sesion 2
DESCRIPTION
Ejercicios de practica para autocadTRANSCRIPT
7/17/2019 Practica en autocad sesion 2
http://slidepdf.com/reader/full/practica-en-autocad-sesion-2 1/8
1
Sesión 2
Practica Guiada No 1
En esta sesión se trabaja con el Menú Draw para dibujar los círculos y arcos, y con las barras
Modify y Modos de Referencia (Object Snap).
Pieza: Soporte
7/17/2019 Practica en autocad sesion 2
http://slidepdf.com/reader/full/practica-en-autocad-sesion-2 2/8
2
Regenerating model.
AutoCAD menu utilities loaded.‘Dibujando el rectángulo inferior.
Command: _lineSpecify first point: 0,40
Specify next point or [Undo]: @90<0
Specify next point or [Undo]: @10<90
Specify next point or [Close/Undo]: @90<180
Specify next point or [Close/Undo]: c
‘Dibujando una línea de referencia.
Command: _line
‘Con modo de referencia midSpecify first point: _mid of ‘Mitad de A1
Specify next point or [Undo]: @30<90
‘Dibujando los círculos superiores.
Command: _circle‘Del menú Draw, Circle : Cen _ Dia
Specify center point for circle or [3P/2P/Ttr
(tan tan radius)]: _endp of ‘Final de R1
Specify radius of circle or [Diameter]: 10
Command: _circleSpecify center point for circle or [3P/2P/Ttr
(tan tan radius)]: _endp of ‘Final de R1
Specify radius of circle or [Diameter] <10.0>: 15
‘Dibujando las líneas verticales.
Command: _line
Specify first point: _qua of ‘Cuadrante derecho
de C1Specify next point or [Undo]: @22<-90 ‘R2
Specify next point or [Undo]:Command: _copy
Select objects: 1 found
Select objects:
Specify base point or displacement, or [Multiple]:
_qua of ‘Cuadrante derecho de C1
Specify second point of displacement or <use
first point as displacement>: _qua of‘Cuadrante izquierdo de C1
R1
A1
C1
R2
7/17/2019 Practica en autocad sesion 2
http://slidepdf.com/reader/full/practica-en-autocad-sesion-2 3/8
3
‘Dibujando líneas de referencia.
Command: _line
Specify first point: _endp of ‘Extremo sur R1
Specify next point or [Undo]: @8<0 ‘R2Specify next point or [Undo]: @8<-90 ‘R3Specify next point or [Close/Undo]:
‘Dibujando el arco de empalme.
‘Del menú Draw; Arc: Start_Cen_End
Command: _arc
Specify start point of arc or [CEnter]: _endp of
‘Extremo sur R1Specify second point of arc or [CEnter/ENd]: _c
Specify center point of arc: _int of
‘Intercepción de R2 y R3
Specify end point of arc or [Angle/chord Length]:
_endp of ‘Extremo sur R3
‘Dibuje el otro arco.
NOTA: en este ejercicio las líneas de centro son
continuas, en la próxima sesión aprenderá a buscar
el tipo de línea correcta.
‘Dibujando las líneas de centro.
Command: _line
Specify first point: 0,0Specify next point or [Undo]: @40<0 ‘L1
‘Moviendo L1 al centro del círculo.
Command: _move
Select objects: 1 found ‘Seleccione L1Specify base point or displacement: _mid of
‘Mitad de L1Specify second point of displacement or <use
first point as displacement>: _cen of ‘Centro C1
‘Dibujando la otra línea.
Command: _line
Specify first point: 0,0
Specify next point or [Undo]: @40<90 ‘L2
Specify next point or [Undo]:
R1R1
R2
R3
R2
R3
C1
L1
7/17/2019 Practica en autocad sesion 2
http://slidepdf.com/reader/full/practica-en-autocad-sesion-2 4/8
4
‘Moviendo L2 al centro del circulo.
Command: _move
Select objects: 1 found
Specify base point or displacement: _mid of‘Mitad de L2Specify second point of displacement or <usefirst point as displacement>: _cen of
‘Centro C1
‘Borre las líneas de referencia.
‘Dibujando líneas de referencia.Command: _line
Specify first point: _endp of
Specify next point or [Undo]: @40<-90 ‘R1
Specify next point or [Undo]: @10<0 ‘R2
‘Dibujando el rectángulo base
Command: _lineSpecify first point: _endp of ‘Extremo derecho R2
Specify next point or [Undo]: @70<0 ‘R3
Specify next point or [Close/Undo]: @20<-90 ‘R4
Specify next point or [Close/Undo]: @70<180’R5
Specify next point or [Close/Undo]:
‘Luego borre las líneas de referencia R1 y R2.
‘Dibujando los arcos en ambos extremos.
Command: _arc
Specify start point of arc or [CEnter]: _endp of
‘Extremo derecho R3
Specify end point of arc: _endp of‘Extremo derecho R5
Specify center point of arc or[Angle/Direction/Radius]: _r
Specify radius of arc: 10
R1
R2
R3
R4
R5
R4
C1
L2
7/17/2019 Practica en autocad sesion 2
http://slidepdf.com/reader/full/practica-en-autocad-sesion-2 5/8
5
NOTA: Recuerde que los arcos se dibujan en
sentido contrario a las agujas del reloj.
‘Dibujando el círculo.
Command: _circleSpecify center point for circle or [3P/2P/Ttr (tan
tan radius)]: _mid of ‘Mitad R4
Specify radius of circle or [Diameter] <15.0>: _d
Specify diameter of circle <30.0000>: 8
‘Copiando el circulo
Command: _copy
Select objects: 1 found ‘Seleccione C2
Select objects:
Specify base point or displacement, or [Multiple]:
_cen of ‘Centro C2
Specify second point of displacement or <usefirst point as displacement>: @70<180
‘Dibujando el rectángulo.
Command: _line
Specify first point: _mid of ‘Mitad R3
Specify next point or [Undo]: @10<90 ‘R6
Specify next point or [Undo]: @15<0
Specify next point or [Close/Undo]: @40<-90
Specify next point or [Close/Undo]: @30<180Specify next point or [Close/Undo]: @40<90
Specify next point or [Close/Undo]: @15<0
Specify next point or [Close/Undo]:
‘Cortando las líneas internas al rectángulo
vertical.
Command: _trim
Current settings: Projection=UCS Edge=NoneSelect cutting edges ...
Select objects: 1 found ‘R3
Select objects: 2 found ‘R5
Select objects: 3 found ‘R7
Select objects: 4 found ‘R8
Select objects:
‘Aquí se seleccionan una a una las líneas internasal rectángulo
C2
C2
R6
R3
R5
R8
R7
7/17/2019 Practica en autocad sesion 2
http://slidepdf.com/reader/full/practica-en-autocad-sesion-2 6/8
6
Select object to trim or [Project/Edge/Undo]:
Select object to trim or [Project/Edge/Undo]:
Select object to trim or [Project/Edge/Undo]:
Select object to trim or [Project/Edge/Undo]:
‘Borre las líneas de referencia R4 y R6.
‘Dibujando una línea de referencia.
Command: _line
Specify first point: _mid of ‘Mitad R7
Specify next point or [Undo]: @8<0 ‘R9Specify next point or [Undo]:
‘Dibujando la proyección de los arcos de
empalme.
Command: _offsetSpecify offset distance or [Through]<Through>: 5
Select object to offset or <exit>: ’Seleccione R9
Specify point on side to offset: ‘Arriba de R9
Select object to offset or <exit>: ’Seleccione R9
Specify point on side to offset: ‘Debajo de R9Select object to offset or <exit>:
‘Copiando
Command: _copySelect objects: 1 found ‘R10Select objects: 1 found, 2 total ‘R11
Select objects:
Specify base point or displacement, or [Multiple]:
_endp of ‘Extremo derecho R10
Specify second point of displacement or <use
first point as displacement>: _per to‘Perpendicular a R8.
‘Dibujando las líneas de centro (E1 y E2).
Command: _line
Specify first point:0,0
Specify next point or [Undo]: @30<0 ‘E1
Specify next point or [Undo]: @30<-90 ‘E2
Specify next point or [Close/Undo]:
R7
R9
R10
R11
R8
7/17/2019 Practica en autocad sesion 2
http://slidepdf.com/reader/full/practica-en-autocad-sesion-2 7/8
7
‘Moviendo E1.
Command: _move
Select objects: 1 found
Select objects:Specify base point or displacement: _mid of‘Mitad E1Specify second point of displacement or <use
first point as displacement>: _cen of ‘Centro C2
‘Hacer lo mismo con E2
‘Copiando los ejes E1 y E2.
Command: _copy
Select objects: 1 found ‘Seleccione E1
Select objects: 1 found, 2 total ‘Seleccione E2Specify base point or displacement, or [Multiple]:
_cen of ‘Centro C3
Specify second point of displacement or <use first
point as displacement>: _cen of ‘Centro C2
‘Línea de eje central (E3).
Command: _lineSpecify first point: 0,0
Specify next point or [Undo]: @50<-90 ‘E3
Specify next point or [Undo]:
‘Moviendo E3
Command: _move
Select objects: 1 found ‘Seleccione E3
Select objects:Specify base point or displacement: _mid of
‘Mitad de E3
Specify second point of displacement or <use
first point as displacement>: _mid of ‘Mitad R8
Command: _move
Select objects: 1 found ‘Seleccione E3Select objects:
Specify base point or displacement: _int of‘Intercepción de E3 con R8
Specify second point of displacement or <use
first point as displacement>: _mid of ‘Mitad de
R12
‘Dibuje usted las líneas de centro de la
proyección de los agujeros.
E2
E1 C3
C3C2
R8
E3
R12
7/17/2019 Practica en autocad sesion 2
http://slidepdf.com/reader/full/practica-en-autocad-sesion-2 8/8
8