pr1me fx - tempo€¦ · • molded polycarbonate lens cover • patented interior micro-reflector...

SPEC_pr1meFX-10_17_IQ_a of 5

1961 McGaw Ave. • Irvine, CA 92614 • (949) 442-1601 • tempollc.com

PROJECT:

TYPE:

WARRANTYTempo provides a 5-year limited warranty.

Pre-set 20º upward tilt

pr1me FXCOVE LIGHTING INTEGRAL POWER SYSTEM

Watts/ft 120V, 5W/ft 120V, 8W/ft 277V, 5W/ft 277V, 8W/ft

Lumens/ft 441 654 463 629

Lumens/Watt 98 88 93 79

Maximum Run Length 190 ft 120 ft 440 ft 275 ft

PERFORMANCE SUMMARY All data nominal. 3500K test data shown.

1.1 in[29 mm]

1.0 in[25 mm]

2.3 in[58 mm]

11.0 in[279 mm]

4.3 in[110 mm]

4.3 in[110 mm]

11.0 in[279 mm]

11.0 in[279 mm]

20°

34.7 in[882 mm]

CONSTRUCTION• Die cast aluminum heat sink and raceway.

• Masking included to allow installation prior to paint (must be removed before operation.)

• PVC mounting rails up to 8 feet in length.

• 1 inch spacers between modules allow for telescoping length to fit any configuration

• Quick wire connectors join sections

• Each module is micro-maintainable with an easy to replace LED board

• CSA damp location listed

• Coming Soon - prefabricated PVC cove profiles in standard shape and knife edge

OPTICS / LENS• Molded polycarbonate lens cover

• Patented interior micro-reflector & molded baffle

• Produces asymmetric type beam spread

POWER SYSTEM• 5w/ft or 8w/ft

• 120V or 277V input, integral, driverless technology

• Total Harmonic Distortion <20%, Power Factor >0.9

• ELV dimming standard, 100-30% dimming range

• 0-10V dimming with Dimming Interface Module (DIM-Z)

PERFORMANCE• Up to 100lm/ft light output

• Produces a uniform pattern specifically designed to deliver the first level of light from a cove

• Optimized to eliminate hot spots in cove corners

• Operating temperature range of -20°C to 50°C

• Rated for a minimum of 86,000 hours (L85) at 25°C ambient operating temperature

LIGHT CHARACTERISTICS• White Color Correlated Temperatures: 2700K, 3000K,

3500K, 4000K

• 80+ Color Rendering Index

• Tempo’s UniBin™ process ensures consistent hue and color to within a maximum 2-step MacAdam ellipse per section

APPLICATIONDelivering the first level of light from a cove fixture. This patent-pending system allows over 85% of the light to exit the cove to deliver better quality light than cans or troffers. Uniquely engineered to optimize the directionality of LED’s, pr1meFX positions the fixture on the back wall of the cove, in line with the top edge of cove, for maximum efficiency. When used in conjunction with a high Light Reflectance Value (LRV) paint on the walls and ceiling, the system is optimized to deliver visually comfortable, shadow and glare free illumination. Ideal for new construction coves, retrofitting existing coves or Tempo supplied, pre-fabricated cove details (coming soon). This easy and intuitive to install system quickly adapts to any in-field cove length with integrated 1 inch telescoping spacers between light engines. Fixture has a pre-set 20º upward tilt for optimum performance and requires no adjustment or aiming. Provides ideal indirect light while improving building infrastructure and lowering construction costs. Available in two foot to six foot sections in one foot increments and can be extended up to the maximum length as per the chart below.




pFXC R -

CW

-E

-WH

-Series Platform Optic/Lens/Diffuser Voltage Dimming Watts/Foot Color Temp Finish Section Length1

pFXC Cove R Rigid CW Ceiling Wash 120 277

120V 277V

E ELV Electronic Low Voltage (100-30%)

58

5 W/ft8 W/ft

27303540

2700K3000K3500K4000K

WH White 23456

2 ft minimum3 ft4 ft 5 ft6 ft maximum

ORDERING INFORMATIONExample: pFXCR-CW-120E8-35WH-6 pr1meFX Cove, Rigid, Ceiling Wash Optics, 120V, ELV dimming, 8W/ft, 3500K, White Finish, 6 ft section length

NOTES:

(1) Total ordered length is specified in 1 ft increments, with a minimum order length of 2 ft. Unless otherwise specified, Tempo will determine the section lengths of shipped product to comprise the total length, up to a maximum section length of 6 ft.

SYSTEM INTEGRATION ACCESSORIES

STANDARD COVE SHIELD DETAIL pFX-SC Standard Cove Detail material in 8 ft lengths

pFX-SC-LEC Standard Cove Detail - Left End Cap

pFX-SC-REC Standard Cove Detail - Right End Cap

pFX-SC-IC Standard Cove Detail - Inside Corner Joiner

pFX-SC-LOC Standard Cove Detail - Outside Corner Joiner

KNIFE EDGE COVE SHIELD DETAIL pFX-EC Knife Edge Cove Detail material in 8 ft lengths

pFX-EC-LEC Knife Edge Cove Detail - Left End Cap

pFX-EC-REC Knife Edge Cove Detail - Right End Cap

pFX-EC-IC Knife Edge Cove Detail - Inside Corner Joiner

pFX-EC-LOC Knife Edge Cove Detail - Outside Corner Joiner

MOUNTING HARDWARE pFX-SM Linear Surface Mounting Rail Extrusion for Retrofit and Coves by Others. 6 ft section

pFX-CM Linear Cove Mount for Tempo Cove Detail. 6 ft section

POWER FEED CABLES Additional lengths available, contact factory PFpFX-F-36 Female connector, 36 in.

PFpFX-M-36 Male connector, 36 in.

JUMPER FEED CABLES Additional lengths available, contact factory JFpFX-MF-12 Female/Male connector, 12 in.

DIMMING INTERFACE MODULE (DIM) 900W max at 120V and 2000W max at 277V DIM-Z Dimming Interface Module coverts 0-10v dimming signals to ELV Dimming output, 120 - 277 Universal Line Voltage

SURGE SUPPRESSION DEVICE A Tempo furnished surge suppression device must be installed on each supplying branch circuit to comply with Tempo’s 5-year warranty terms

SSD-120 120V Branch Circuit

SSD-277 277V Branch Circuit



MOUNTING OPTIONSTwo mounting rail assemblies to choose from. Both are a linear extruded rigid PVC in 6 ft increments with pre-drilled holes for attachment to the infrastructure. The system works best if the entire length of the intended mounting area is installed, thereby allowing the luminaire to adapt to the infrastructure.

SURFACE MOUNT (FOR USE WITH COVE SUPPLIED BY OTHER) Catalog # pFX-SM - A 1.9 in tall extrusion to support the luminaire in retrofit

applications or new cove built in the field. The mounting rail can be installed before or after the cove is constructed. See detail drawing for minimum dimensions required.

COVE MOUNT (FOR USE WITH TEMPO SUPPLIED COVE DETAIL) Catalog # pFX-CM - A 2.5 in tall extrusion designed specifically for Tempo

Cove Details (coming soon.) The mounting rail is leveled and placed in the designed location before the luminaire is attached and connected. The Cove Detail is then pushed onto the mounting rail barbs and prepared for painting.

COVE DETAILS (Coming Soon)Three designer Cove Details that deliver a solution to the high cost of in-field cove construction. The Cove Detail attaches directly to the Cove Mount by means of protruded barbs running linearly across the wall. Inside corner joiner, outside corner joiner, and end caps are available to finish the project. The material is suitable for spackling and painting before or after the luminaire is installed. This Cove Detail provides ideal indirect lighting while reducing project construction costs.

STANDARD COVE 2.8 in tall by 4 in wide extruded PVC available in 8 ft lengths.

KNIFE EDGE COVE 2.5 in tall by 6.5 in wide extruded PVC available in 8 ft lengths.

CURVED COVE 2.8 in tall by 4 in wide extruded PVC available in 8 ft lengths.

DIMENSIONAL INFORMATION


1.1 in[29 mm]

1.0 in[25 mm]

2.3 in[58 mm]

11.0 in[279 mm]

4.3 in[110 mm]

4.3 in[110 mm]

11.0 in[279 mm]

11.0 in[279 mm]

20°

34.7 in[882 mm]

SURFACE MOUNT FIXTURE ONLY

6.5 in[165 mm]

12.0 in[305 mm]

2.8 in[72 mm]

3.8 in[98 mm]

2.8 in[72 mm]

4.0 in[102 mm]

2.8 in[72 mm]

4.0 in[102 mm]

KNIFE EDGE COVE DETAIL

6.5 in[165 mm]

12.0 in[305 mm]

2.8 in[72 mm]

3.8 in[98 mm]

2.8 in[72 mm]

4.0 in[102 mm]

2.8 in[72 mm]

4.0 in[102 mm]

STANDARD COVE DETAIL

6.5 in[165 mm]

12.0 in[305 mm]

2.8 in[72 mm]

3.8 in[98 mm]

2.8 in[72 mm]

4.0 in[102 mm]

2.8 in[72 mm]

4.0 in[102 mm]

CURVED COVE DETAIL



1.1 in[29 mm]

1.0 in[25 mm]

2.3 in[58 mm]

20°

11.0 in[279 mm]

11.0 in[279 mm]

4.0 in[102 mm]

4.0 in[102 mm]

23.0 in[584 mm]

71.0 in[1,803 mm]

47.0 in[1,194 mm]

35.0 in[889 mm]

59.0 in[1,499 mm]


DIMENSIONAL INFORMATION

PERFORMANCE DATA

1.1 in[29 mm]

1.0 in[25 mm]

2.3 in[58 mm]

20°

11.0 in[279 mm]

11.0 in[279 mm]

4.0 in[102 mm]

4.0 in[102 mm]

23.0 in[584 mm]

71.0 in[1,803 mm]

47.0 in[1,194 mm]

35.0 in[889 mm]

59.0 in[1,499 mm]

1.1 in[29 mm]

1.0 in[25 mm]

2.3 in[58 mm]

20°

11.0 in[279 mm]

11.0 in[279 mm]

4.0 in[102 mm]

4.0 in[102 mm]

23.0 in[584 mm]

71.0 in[1,803 mm]

47.0 in[1,194 mm]

35.0 in[889 mm]

59.0 in[1,499 mm]

1.1 in[29 mm]

1.0 in[25 mm]

2.3 in[58 mm]

20°

11.0 in[279 mm]

11.0 in[279 mm]

4.0 in[102 mm]

4.0 in[102 mm]

23.0 in[584 mm]

71.0 in[1,803 mm]

47.0 in[1,194 mm]

35.0 in[889 mm]

59.0 in[1,499 mm]

1.1 in[29 mm]

1.0 in[25 mm]

2.3 in[58 mm]

20°

11.0 in[279 mm]

11.0 in[279 mm]

4.0 in[102 mm]

4.0 in[102 mm]

23.0 in[584 mm]

71.0 in[1,803 mm]

47.0 in[1,194 mm]

35.0 in[889 mm]

59.0 in[1,499 mm]

3 FOOT SECTION

4 FOOT SECTION

5 FOOT SECTION

6 FOOT SECTION

2 FOOT SECTION

LARGE ROOM - 25’ X 35’ X 10’(h) 8W pr1meFX on two 35’ sides Foot candles at the working plane (30”)

Average Foot Candles: 23.2Ave/Min Ratio: 1.67Total Feet of pr1meFX: 66’ (33’ each side)Total Wattage: 528WLPD: 0.58C/W/F Reflectance: 0.86 / 0.80 / 0.20

Corridor- 22’ X 12’ X 12’(h) 8W pr1meFX on one side Foot candles at the floor

Average Foot Candles: 15.6Ave/Min Ratio: 1.5Total Feet of pr1meFX: 20’Total Wattage: 160WLPD: 0.60C/W/F Reflectance: 0.86 / 0.80 / 0.20



PERFORMANCE DATA

INSTALLATION DETAILS


Tempo Industries reserves the right to change materials or modify the design of its product without notification as part of the company’s continuing product improvement program. Please consult www.tempollc.com for the most up-to-date specifications and technical data.

375

281

187

94

242

181

121

60

242

181

121

60

Typical 5 watt Polargraph

Typical 8 watt Polargraph

AA

B

LRV of .85recommended for ceilings

LRV of .80 recommended for walls & cove

• 8” Minimum• 12” to 24” Optimum• 30” maximum

3” Minimum (No Max)

B

For uniform light and elimination of hot spots at ends and corners leave minimum 6” space between wall and pr1meFX.

Optimum space is 9”.

Maximum space is 12”.

pr1me fx - tempo€¦ · • molded polycarbonate lens cover • patented interior micro-reflector...

Documents