Calypso Program Overview

2 of 21Calypso Program Overview

If you have a CAD model, simply load it into Calypso. No model? Just start taking points.

3 of 21Calypso Program Overview

A new Calypso program with the model loaded.

4 of 21Calypso Program Overview

Ask the question. What are you interested in measuring?

5 of 21Calypso Program Overview

Loading more Characteristics.

6 of 21Calypso Program Overview

We have asked for Flatness, Roundness, Parallelism, and True Position.

7 of 21Calypso Program Overview

Click the feature being measured for the characteristic.

8 of 21Calypso Program Overview

Modify the measurement strategy for the measured feature.

9 of 21Calypso Program Overview

Define the features between which parallelism is being measured.

10 of 21Calypso Program Overview

The measurement strategy for the measured plane.

11 of 21 Calypso Program Overview

Define your considered feature and its Datum structure from the model.

12 of 21Calypso Program Overview

The nominal position and orientation is taken from the model. No further modifications are needed.

13 of 21Calypso Program Overview

Define the Base Alignment using elements from the CAD model.

14 of 21Calypso Program Overview

Base Alignment is created. The origin is created on the model.

15 of 21Calypso Program Overview

Create Clearance Planes around the part. This defines the area around which your CMM will travel during inspection.

16 of 21Calypso Program Overview

Clearance Planes defined around the part.

17 of 21Calypso Program Overview

Ready to run the inspection.

18 of 21Calypso Program Overview

Graphical output for Roundness of the cylinder.

19 of 21Calypso Program Overview

Graphical output of Flatness of the plane surface.

20 of 21Calypso Program Overview

Typical Calypso inspection report. Deviations are reported on far right of report. This information is used to better the process.

21 of 21Calypso Program Overview