powertech upsc substation capabilities. b-tech developed battery monitoring system which monitors...
TRANSCRIPT
Powertech UPSC Substation Capabilities
B-tech
• Developed Battery monitoring system which monitors Substation Batteries
• The prime objective of this system is to identify faulty batteries and have them removed.
• The system consists of an S5(brains and comms), BVM software Battery Validation Manager (analyzing software) and connections to each of the batteries in the line-up
• Major advantage of this system is the ability to extract impedance information from the cell
• Once this information is extracted it is sent to the BVM software for trending
B-tech
• Rising Impedance tells us that the cell is failing
•Trending the impedance can tell us when the cell will fail
•Cells with high impedance will not deliver the rated capacity
•Voltage can remain stable and mask defective cells
•All of this information is available via B-techs BVM software which can be communicated to via Ethernet, modem or serial connection. Modbus and DNP protocols are available.
•BVM software is easy to use, intuitive and Quickly identifies suspect batteries
EMSPEC
EMSPEC
• research, develop and manufacture some of the highest quality, highest end switching equipment in the world, including high, medium and low voltage grounding switches, vertical breaks, center breaks, double side breaks, single side breaks, reversing switches, tilt types, telescopic types, semi-pantograph types, knee types and a complete range of manual and motor operators.
• EMSPEC machines all of their parts, no parts are casted. Casting cannot produce a consistant part with equal electrical and physical properties. Machining the switch parts produces a safe, easily maintainable, reliable switch.
• EMSPEC produces a modular motor operator which is safe reliable and easy to install and maintain. It allows easy interface to SCADA systems via multiple communication paths
EMSPEC
Square D
• Manufactures monitoring equipment for substations. Square D has a full line of products with a full range of capabilities.
• Excel in communications from the monitor to the RTU/Scada System
– Ethernet/Serial/Modem– Multiple Protocols(DNP, Modbus, Ion, protocol interpreter
• Software is available which compliments the hardware– Ion Enterprise (Scada, realtme software)– EEM (PQ software)
• Technology available to calibrate high voltage CTs and Pts
Product Portfolio
Digital Comms
Energy Pulsing
Automatic Alarming & Control
Status Monitoring
High Speed Metering
Direct Ethernet Access
Trend Logging
Revenue Accuracy
Advanced Control
Waveform Capture
Features
$Real-time Power & Energy
ANSI C12.20
Sag/Swell detection
Transient detection
Loss compensation
Web-enabledEN50160
Class A Metering
Current and Potential Calibration
Power Design
• Modular Enclosures
• These units are customizable to any size and any design• Can add electric, cable trays, venting, insulation.• User can assemble themselves in the substation
Tech Products• 1, 3 and 6 Inch Tags, Customizable Tags
Powertech-UPSC
• Offer Technical Support/Advise
• Offer Distribution and Stocking options out of Farmington Ct.
• Offer splices and connectors for a full range of applications
• Offer cable cleaners and cable prep kits and cable lubricants
Inside Sales Contacts
Chris Halm (860) 678 8772 [email protected]
Lisa Langdon (860) 678 8772 [email protected]