PRODUCT DATASHEETICS POWERGRIT UTILITY SAWS & CHAIN

PowerGrit® Utility Saw ChainSafer. Faster. Easier.

The ICS Utility chain saw addresses operator safety with its revolutionary grinding technology which eliminates rotational kickback and improves operator positioning when cutting pipe. Utilized by public and private water and wastewater departments worldwide, this patented platform, exclusively from ICS, is designed to cut a variety of materials from ductile iron to plastic pipe with far less excavation. The ability to cut up to 24” pipe completely from one side radically reduces the difficulty of the job. Complete your next job safer, faster and easier with ICS Utility chain saws.

Product Benefits• Increased Safety • Operator Control • Reduced Excavation • Better Access • Versatility

Cuts these materials • Ductile Iron Pipe • Cast Iron Pipe • PVC Pipe • HDPE Pipe • Insituform Pipe Lining • Asbestos* Concrete Pipe

* Asbestos is a hazardous material, known to cause serious respiratory diseases. Cutting into asbestos can release asbestos fibers into the air. Always research and follow the correct safety procedures, including applicable national and state or provisional occupational health and safety regulations, and protect yourself and those around you from asbestos-related disease. Always arrange for the material to be removed safely by a qualified person. ICS is not responsible for exposure to asbestos caused by use of this product.

ICS patent pendingBrazed Diamond Layer

Effective January 1, 2017 | Copyright 2017 ICS | Blount Inc. Pricing and specifications subject to change without notice. All rights reserved. ICS, WallWalker, SpeedHook, SealPRO, FORCE4 and PowerGrit are registered trademarks of ICS. The best way to cut concrete, DCT, TSS, ProFORCE, and TwinMAX are trademarks of ICS. Rev: 0117.ICS, BLOUNT INC. HEADQUARTERS | 4909 SE International Way Portland, OR 97222-4679 | phone 800.321.1240 · fax 503.653.4393

ICSDIAMONDTOOLS.COM

PRODUCT DATASHEETICS POWERGRIT UTILITY SAWS & CHAIN

Pipe Clamp In addition to the time saving value of PowerGrit technology, the pipe clamp accessory, designed for ICS 880/890 series hydraulic saws and the 701-A pneumatic saw, and developed for the underground pipe application, brings a whole new level of safety, accuracy and ease of use to the job. With a simple adaptor, you can mount to this clamp and dramatically reduce the effort of handling the saw, while providing a solid, stable cutting platform that further improves operator safety and precision of the cut.

Underground Pipe Cutting Change the Way the Job Gets Done!

PowerGrit technology allows access to the entire cut from one position, which not only reduces the amount of excavation required, but also dramatically reduces the difficulty of the job.

880/890 Series Hydraulic Saws, 15 in, 20 in and 25 in Chains and Bars

695XL Gas Saw, 16 in Chain and Bar

ICS POWERGRIT® METHOD

CONVENTIONAL METHOD

Pipe Clamp Accessory (for 880/890 & 701-A saws only)

ICS PowerGrit Saw Platforms

680ES Gas Saw10 in Chain and Bar

701-A Pneumatic Saw, 15 in, 20 in and 25 in Chains and Bars

Effective January 1, 2017 | Copyright 2017 ICS | Blount Inc. Pricing and specifications subject to change without notice. All rights reserved. ICS, WallWalker, SpeedHook, SealPRO, FORCE4 and PowerGrit are registered trademarks of ICS. The best way to cut concrete, DCT, TSS, ProFORCE, and TwinMAX are trademarks of ICS. Rev: 0117.ICS, BLOUNT INC. HEADQUARTERS | 4909 SE International Way Portland, OR 97222-4679 | phone 800.321.1240 · fax 503.653.4393

ICSDIAMONDTOOLS.COM