power swing door operators easyaccess®...
TRANSCRIPT
Inside ofJa bm
Push Plate or Switch (locate as required)
22 Ga. 2 wire to activation device(by E.C.)
Horton Automatics reserves the right to improve the product and change its specifications without notice. Dimensions given in U.S. inches followed by millimeters in parenthesis.
3/4" (19)
Pair
Recommended power input location1 1/2" (38)
Output shaftC.L.
1 1/2"(38)Ea. end
Inside of
Ja bm
1 1/2" (38)
C.L.Output shaft
Exit Deviceif required
(by others)
Single Unit
To electric door strike (strike by hwd supplier)
C.L.Output shaft
1 1/2" (38)
120 VAC 15 AMPpower supply.(By E.C.)
(See page B1.4 for Series 4100)
Typical Mounting and Wiring for Single Unit
Connect tosecond
operator ifrequired
POWER SWING DOOR OPERATORS GENERAL INSTALLATION
EasyAccess Series 7100 Typical Mounting and Rough-In Wiring
NOTE:Proper su
pport is required in t
he
mountingarea. Wood blocki
ng in wallboard
is recommended.
3/4" (19) 7.069d5
www.hortondoors.com
4242 Baldwin BoulevardCorpus Christi, Texas USA 78405-3399 Tel: 800-531-3111, 361-888-5591 Fax: 800-531-3108, 361-888-6510
The Automatic ChoiceA U T O M A T I C S
®
iM ni um m 1/2" conduit
(by E.C.)
22 Ga. 2 wire to activ
ation device (by E.C.
)
®
To electricdoor strike
(strike byhwd suppl
ier)
120 VAC 15 A PM
power supply.
July 10B1.2