connectPower – Weidmüller’s switch-mode

power supplies

Weidmüller’s connectPower series of switched-mode power

supplies are used in industry, building automation and in marine

engineering. As well as the availability of a wide variety of designs

and features, the single-phase devices are rated from

12 to 500 W. Further advantages of these products are:

· wide voltage range input from 85 to 264 V AC

· radio interference suppression to

DIN EN 55022 Class B

· short-circuit and overload control on the

output side

· connect in parallel for increased performance

· power factor correction

· option for generating safety extra-low voltage

SELV

· silicone free

WAVEGUARD – Weidmüller’s fusing concept

The problem: Due to their technical characteristics, switched-

mode power supplies provide no, or just a very limited, dynamic

output current. When an overload condition occurs, the device

limits the current for protection purposes and shuts down the

voltage supply. The resulting loss of power means that

conventional circuit breakers and safety fuses are not reliably

tripped.

The solution: Weidmüller’s fusing concept WAVEGUARD

provides selective electronics fusing at this point.

With Weidmüller’s fusing concept, only

the failing circuit is isolated and its supply

of power shut down. The result is greater

plant availability with troubleshooting

times, in systems becoming more

complex by the day, reduced to a minimum.

POWER SUPPL IES

IN THE HEART OF THE ELECTRICAL CABINET

Premium power supp ly concepts f rom We idmül ler !

Transformers and power supplies are the most important links in

the energy supply chain of automation systems – they form the

heart of every electrical cabinet. And because the right power

supply is decisive for the reliable and trouble-free functioning of

the connected components, individual power supply concepts are

required. For many years, Weidmüller has proven its competence

and experience by supplying power to electro-technical

component groups

· in systems and mechanical engineering

· in industrial automation

· in the power supply industry

· in production lines

· in building technology

This all goes to prove that Weidmüller’s power supply

concepts fulfil all the prerequisites for implementing a stable and

dependable power supply in all fields.

Weidmüller’s power supply concepts: your guarantee!

Our customers have tough demands and special requirements –

that is why we develop the right power supply concept for their

individual needs. We offer transformer power supplies, switch-

mode power supplies and fusing concepts – finely tuned to suit

the required application. International approvals and wide input

ranges mean our products can be utilized all over the world.

compactPower – transformer power supplies

from Weidmüller

Weidmüller’s compactPower series of transformer power supplies –

available in single and three-phase versions up to 1000 W – are

utilized where process or control voltages are required that deviate

from the systems voltage. At this point they ensure galvanic isola-

tion between the input and output circuits. Weidmüller’s transformer

power supplies fulfil increased safety requirements in accordance

with DIN EN 61558. Further advantages of these products are:

· nominal voltage from ~230 V +/- ~15 V or

~400 V +/- ~15 V, 50/60 Hz

· short-circuit and overload protection on

the output side

· time-saving keyhole assembly

· snap-on fixing element for 35-mm DIN

mounting rails for devices up to 144 Watts.

· option for generating safety extra-low voltage SELV

Power Supplies

Product Overview

Weidmüller Interface GmbH & Co. KGKlingenbergstraße 16D-32758 DetmoldPhone +49 (0) 5231 14-0Fax +49 (0) 5231 14-2083E-Mail info@weidmueller.comInternet www.weidmueller.com

Order number:5653520000/01/2006/DMMD

www.weidmueller.com

ArgentinaAustraliaAustriaAzerbaijanBahrainBelarusBelgiumBosnia-HerzegovinaBrazilBulgariaCanadaChileChinaColombiaCosta RicaCroatiaCzech RepublicDenmarkEgyptEstoniaFinlandFranceGermanyGreeceHong KongHungaryIcelandIndiaIndonesiaIran

IrelandIsraelItalyJapanJordanKazakhstanKuwaitLatviaLebanonLithuaniaLuxembourgMacedoniaMalaysiaMexicoNetherlandsNew ZealandNorwayOmanParaguayPeruPhilippinesPolandPortugalQatarRomaniaRussiaSaudi ArabiaSerbia/MontenegroSingaporeSlovakia

SloveniaSouth AfricaSouth KoreaSpainSwedenSwitzerlandSyriaTaiwanThailandTurkeyUAEUkraineUnited KingdomUruguayUSAVenezuelaVietnamYemen

Weidmüller is the leading manufacturer of componentsfor electrical connection technology. The Weidmüllerproduct portfolio ranges from terminal blocks,PCB connectors and terminals, protected components,Industrial Ethernet components and relay sockets topower supply and overvoltage protection modulessuitable for all applications. Electrical installation andmarking material, basic I/O components and a variety oftools round off the range. As an OEM supplier, thecompany sets global standards in the field of electricalconnection technology.

We cannot guarantee that there are no mistakes in the publications or software provided by us to the customer for thepurpose of making orders. We try our best to quickly correct errors in our printed media. For this purpose we list corrections,which have been identified after publishing printed media, on ourweb site at www.weidmueller.com. For convenience we list thesecorrections against product catalogue number and/or page number. This Internet-database is part of our catalogue.

All orders are based on our general terms of delivery, which can be reviewed on the websites of our group companies where youplace your order. On demand we can also send the general termsof delivery to you.

24 V / 10 A CP NT3 250 8628620000

24 V / 16 A CP NT3 400 8628630000

24 V / 20 A CP NT3 500 8628650000

24 V / 25 A CP NT3 600 8628660000

24 V / 30 A CP NT3 750 8628670000

24 V / 40 A CP NT3 1000 8628680000

24 V / 1 A CP-SNT 24 W 9928890024

15 V / 1,5 A CP-SNT 24 W 9928890015

12 V / 1,5 A CP-SNT 24 W 9928890012

5 V / 2 A CP-SNT 24 W 9928890005

24 V / 20 A CP-DM 10 8710620000

24 V / 40 A CP-DM 20 8768650000

POWER SUPPL IES

24 V / 1,6 A WGS/WGZ 24V DC 1,6A 8618890000/8621040000

24 V / 3,15 A WGS/WGZ 24V DC 3,15A 8618910000/8621030000

24 V / 6,3 A WGS/WGZ 24V DC 6,3A 8618930000/8621020000

24 V / 8 A WGS/WGZ 24V DC 8A 8618940000/8621010000

24 V / 0,5...5,0 A WGS/WGZ 24V DC 0,5…5,0A 8710270000/8727630000

24 V / 2,3 A CP-SNT 55W 9927480024

24 V / 6,5 A CP-SNT 160W 9925340024

24 V / 12,5 A CP-SNT 300W 9916250024

48 V / 1,04 A CP-SNT 55W 9927480048

48 V / 3,5 A CP-SNT 160W 9925340048

12 V / 3 A CP-SNT 55W 9927480012

12 V / 8 A CP-SNT 160W 9925340012

5 V / 3 A CP-SNT 55W 9927480005

5 V / 8 A CP-SNT 160W 9925340005

compactPower 1-ph

· non-stabilized, single-phase power

supplies

compactPower 3-ph

· non-stabilized, three-phase power

supplies

connectPower

DC/DC converters

connectPower 1-ph

WAVEPOWER switch-mode

power supplies

· single-phase switch-mode power supply

unit just 22.5 mm in width

connectPower 1-ph

INSTAPOWER switch-mode

power supplies

· single-phase switch-mode power supplies

in the installation housing

connectPower 1-ph

Standard switch-mode

power supplies

· single-phase switch-mode power

supplies just 57 mm in width

connectPower 1-ph

ECOLINE switch-mode

power supplies

· single-phase switch mode power supply

connectPower

ECOLINE Diode module

· Device for connecting 2 power supply units

for increased performance, redundancy etc.

USV

Battery control unit

· Module for monitoring and defined charging of

accumulators

WAVEGUARD

Electronic fusing

· Electronic fusing for selective, dynamic and static

fusing of DC circuits

WAVEGUARD

Output: Input:

230 V / 400 V, plus additional con-

nection option +/- 15 V;

24 V / 1 A CP NT 36 8575260000

24 V / 2,5 A CP NT 72 8575270000

24 V / 5 A CP NT 144 8575280000

24 V / 7 A CP NT 192 8575300000

24 V / 10 A CP NT 264 8575310000

24 V / 15 A CP NT 432 8575320000

Output: Input:

3 x 400 V +/- 5 V;50/60 Hz; PE

Output: Input:

DC: 9…16 V

Output: Input:

AC: 85…265 V/50/60Hz

DC: 120…300 V

Output: Input:

AC: 85…265 V/50/60 Hz

DC: 120…300 V

Output: Input:

AC: 85…265 V/50/60 HzDC: 120…300 V

Output: Input:

AC: 85…264 V/50/60 Hz DC: 120…370 V

Output: Input:

DC: 2 x 24 V

Output: Input:

AC: 85...265 V/50/60 Hz

DC: 120...300 V

Output: Input:

Output: Input:

DC: 18…24 V

24 V / 2 A CP-DCDC 50 W 9919372424

12 V / 3 A CP-DCDC 50 W 9919372412

5 V / 8 A CP-DCDC 50 W 9919372405

24 V / 2 A CP-DCDC 50 W 9919371224

12 V / 3 A CP-DCDC 50 W 9919371212

5 V / 8 A CP-DCDC 50 W 9919371205

24 V / 0,5 A CP-SNT 12W 9918840024 24 V / 3,2 A CP SNT 70W 24V 3A 8708660000

24 V / 5 A CP SNT 120W 24V 5A 8708670000

24 V / 10 A CP SNT 250W 24V 10A 8708680000

24 V / 20 A CP SNT 500W 24V 20A 8778870000

Redundancy configuration with external signalling contact (via relay coupler)

Should one of the power supply units fail, the second device will ensure continued supply

230 V AC

115 V AC8778870000

CP SNT 500 W 24 V 20 A

Input: 100 - 120 V AC 8.0 A 200 - 240 V AC 4,0 A 50 / 60 HzOutput: 24 V DC 20 A

\ %

10-15 A Char. Cmax. 250 V AC / 1 A 30 V DC / 1 A

L N PE 12 11 14 +V +V -V -VAdj.

24...26 V DC

DC OK •

WA

VE

GU

AR

D

WA

VE

GU

AR

D

WA

VE

GU

AR

D

WA

VE

GU

AR

D

WA

VE

GU

AR

D

Load circuit

1Load circuit

2

Load circuit

3Load circuit

4

Load circuit

5

Group failuresignal to SPS, IPC etc.

Joint power supply tothe installation via

switch-mode power supply

External Resetof SPS, IPC etc.

Status relays(change-over

contact)115/230 V AC50/60 Hz

Electronic fusing for selective, dynamic and static fusing of DC circuits

12 V / 15 A CP-BBU 115-230VAC / 12VDC 9916280012

24 V / 15 A CP-BBU 115-230VAC / 24VDC 9916280024

connectPower connectPower USV

230 V AC

115 V AC8708680000

CP SNT 250 W 24 V 10 A

Input: 100 - 120 V AC 200 - 240 VAC 50 / 60 HzOutput: 24 V DC 10 A

\%

6-10 A Char. Cmax. 250 V AC / 1 A 30 V DC / 1 A

L N PE 12 11 14 +V +V -V -VAdj.

24...26 V DC

DC OK •

Power supply

Batterycontrol unit

Accumulator

to the load circuit

Alarm contact

Status relays(change-over

contact)

115/230 V AC50/60 Hz

+-

PEPS

NPS

LPS

LNPE

+

-

+

-

+-

Switched-mode power supply, battery control unit and

accumulator providing an uninterrupted power supply

Power supply 1 Power supply 2Diode module24 V DC / 10 A

230 V AC

115 V AC8708680000

CP SNT 250 W 24 V 10 A

Input: 100 - 120 V AC 200 - 240 VAC 50 / 60 HzOutput: 24 V DC 10 A

\%

6-10 A Char. Cmax. 250 V AC / 1 A 30 V DC / 1 A

L N PE 12 11 14 +V +V -V -VAdj.

24...26 V DC

DC OK •

230 V AC

115 V AC8708680000

CP SNT 250 W 24 V 10 A

Input: 100 - 120 V AC 200 - 240 VAC 50 / 60 HzOutput: 24 V DC 10 A

\%

6-10 A Char. Cmax. 250 V AC / 1 A 30 V DC / 1 A

L N PE 12 11 14 +V +V -V -VAdj.

24...26 V DC

DC OK •E1 -V -V E2

•+

E1 E2

-V

-V

8710620000CP DM 10

Input: 24 VOutput: 24 V

2x10 A20 A

%\

OUT

IN

24 V DC / 10 A 24 V DC / 10 A

Status relays (change-over contact)e.g. to SPS, IPC

Status relays (change-over contact)e.g. to SPS, IPC

Type Cat. No. Type Cat. No. Type Cat. No. Type Cat. No. Type Cat. No. Type Cat. No. Type Cat. No.

Type Cat. No.

Type Cat. No. Type Cat. No. Type Cat. No.

connectPower 3-ph

ECOLINE Power Supply

· three-phase swítch mode power supply

Output: Input:

AC: 3 x 340...575 V/50/60 Hz

24 V / 10 A CP SNT3 250W 24V 10A 8708700000

24 V / 20 A CP SNT3 250W 24V 20A 8708710000

24 V / 40 A CP SNT3 250W 24V 40A 8708730000

Type Cat. No.