power pick global -...

-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.- © 2011 All rights reserved. Copyright by Kardex Software GmbH, D-This document - even partly - must not be printed and/or copied without the agreement of format and content is subject to change without special announcement.All trademarks in this document are property of the respective

Power Pick Global

Power Pick GlobalMobile Devices

-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-

-76744 Wörth, Germany. must not be printed and/or copied without the agreement of Kardex Software GmbH

format and content is subject to change without special announcement. All trademarks in this document are property of the respective owner, even though they are not extraordinarily marked.

Power Pick Global

Power Pick Global

Mobile Devices

Version 3.1

Kardex Software GmbH. Changing in

owner, even though they are not extraordinarily marked.

Title:

Power Pick Global - Mobile Devices

KARDEX Software GmbH., 2012

Date Version

12 February 2010 0.1

22 March 2010 2.1

22 March 2010 2.1

18 August 2010 2.1

10. June 2011 2.3

15. Mai 2012 3.1

Mobile Devices

Rev:

28

Rev.

8.16.2010

2012

Revision History

Version Description

Technical description to use the mobile

solution

The document is prepared for release 2.1

Figure 7 updated

Figures updated

Figures updated and description adjusted

The document is prepared for release 3.1

Rev. Date:

8.16.2010

of 23

Author

N.Verzano

A.Jamalian

N.Verzano

N. Verzano

N. Verzano

S. Reichert

Title:



1. Introduction

1.1 Installation

2. Prerequisites to use PP.Mobile2 on a mobile device with Power Pick Global

2.1 Technological Background how PP.Mobile2 works

2.2 Start the services on the workstation (PC/Server)

2.3 Network settings for windows mobile

3. Working with PP.Mobile2

3.1 Entry screen of PP.Mobile2

3.2 Set up the CEU

3.3 Set up the Language

3.4 Log in to PowerPick Global

3.5 Main Screen

3.6 Manual flow

3.7 Order managed flow

Mobile Devices

Rev:

28

Rev.

8.16.2010

2012

Table of Contents

Prerequisites to use PP.Mobile2 on a mobile device with Power Pick Global

Technological Background how PP.Mobile2 works

ervices on the workstation (PC/Server)

Network settings for windows mobile

Entry screen of PP.Mobile2

Log in to PowerPick Global

Rev. Date:

8.16.2010

of 23

4

4

4

5

5

6

8

8

9

10

11

12

13

16

Title:



1. Introduction

PP.Mobile2 is a mobile client of Power Pick Global and can be used on windows mobile platforms with at least

Windows Mobile 6.5 and .Net Compact Framework 3.5 installed

Motorola/Symbol has been used.

1.1 Installation

1st: Install .Net Compact Framework 3.5 on the device with Windows Mobile 6.5 as OS

2nd

: Manually copy the PP.Mobile2.cab f

Center (Windows 7)

3rd

: Install PP.Mobile2 by clicking the PP.Mobile

2. Prerequisites to use

• Device with Windows Mobile 6.5

• .Net Compact Framework 3.5 installed on the device

• Accessible Cross Enterprise Unit (CEU) through network connection

• Appropriate license

• Proper settings

Mobile Devices

Rev:

28

Rev.

8.16.2010

2012

Power Pick Global

is a mobile client of Power Pick Global and can be used on windows mobile platforms with at least

Compact Framework 3.5 installed. As the reference product the device MC3190 from

: Install .Net Compact Framework 3.5 on the device with Windows Mobile 6.5 as OS

.cab file to the device – either with ActiveSync or Window Mobile Device

by clicking the PP.Mobile2.cab and confirm the popup dialogs (directly on the device).

Prerequisites to use PP.Mobile2 on a mobile device with Power Pick Global

6.5

.Net Compact Framework 3.5 installed on the device

Accessible Cross Enterprise Unit (CEU) through network connection

Figure 1: Network setup to use PP.Mobile

Rev. Date:

8.16.2010

of 23

is a mobile client of Power Pick Global and can be used on windows mobile platforms with at least

reference product the device MC3190 from

either with ActiveSync or Window Mobile Device

(directly on the device).

on a mobile device with Power Pick Global

Title:



2.1 Technological Background how PP.Mobile

PP.Mobile uses Web Services of PowerPick Global to process orders or get information from warehouses. The

following figure shows the current implementation and curre

2.2 Start the services on the workstation (PC/Server)

It is required to provide at least one Cross Enterprise Unit (CEU) a mobile device can connect to. Install Powerpick

Global on a workstation that is accessible through the internet and intranet respectively.

of the workstation and the port number of the CEU service (e.g.: myhost:1353). The port number can be changed in

the System Configuration of the PP.Win client as shown in the following figure.

Figure 3: Parameters for the CEU can be changed in the

Mobile Devices

Rev:

28

Rev.

8.16.2010

2012

Technological Background how PP.Mobile2 works


following figure shows the current implementation and currently available web services.

Figure 2: Currently available web services

Start the services on the workstation (PC/Server)


Global on a workstation that is accessible through the internet and intranet respectively. Keep in mind

nd the port number of the CEU service (e.g.: myhost:1353). The port number can be changed in

.Win client as shown in the following figure.

: Parameters for the CEU can be changed in the System Configuration

Rev. Date:

8.16.2010

of 23



Keep in mind the IP address

nd the port number of the CEU service (e.g.: myhost:1353). The port number can be changed in

System Configuration

Title:



2.3 Network settings for windows mobile

A network connection needs to be set up to

figures show how to set up the mobile device to get connected with the internet/intrane

Figure 4

Mobile Devices

Rev:

28

Rev.

8.16.2010

2012

Network settings for windows mobile

A network connection needs to be set up to establish a connection to the Cross Enterprise Unit.

figures show how to set up the mobile device to get connected with the internet/intranet.

4: Select Connections to get to the network settings

Figure 5: Select Set up my proxy server

Rev. Date:

8.16.2010

of 23

establish a connection to the Cross Enterprise Unit. The following

Title:



Figure

Figure 6 shows how to make the internet or rather the intranet accessible. If proxy setting is necessary it

can also be set on this screen.

provided by the network administrator.

The wireless configuration may vary from manufacturer to manufacturer! Please

refer to the manual of the device!

Mobile Devices

Rev:

28

Rev.

8.16.2010

2012

Figure 6: Check This network connects to the Internet

shows how to make the internet or rather the intranet accessible. If proxy setting is necessary it

can also be set on this screen. Further credentials to access the internet or rather intranet needs to be

provided by the network administrator.


refer to the manual of the device!

Rev. Date:

8.16.2010

of 23

shows how to make the internet or rather the intranet accessible. If proxy setting is necessary it

access the internet or rather intranet needs to be


Title:



3. Working with PP.Mobile

Once the network connection has been established and PP.Mobile

get started.

3.1 Entry screen of PP.Mobile

Every user who wants to use PP.Mobile

account to get access to PowerPick Global

figures show how to set up the device to get a permitted access to a CEU.

Figure 7: The start up screen shows no

If there is no CEU set in the settings or the provided CEU is not available the entry screen of the application looks

like Figure 7. The menu button visible but not enabled. Therefore the user cannot process any

PowerPick Global. If the settings have been provided properly and the CEU is available the

blue color (and the log in screen start automatic

No connection to CEU.

Connected to CEU, but user not yet logged on.

Connected to CEU and user logged on.

Mobile Devices

Rev:

28

Rev.

8.16.2010

2012

Working with PP.Mobile2

connection has been established and PP.Mobile2 has been installed on the device it can be used to

Entry screen of PP.Mobile2

Every user who wants to use PP.Mobile2 on a mobile device needs to have at least a valid

Global. It is not possible to create an account with PP.Mobile

figures show how to set up the device to get a permitted access to a CEU.

: The start up screen shows no available services (red information bar)


utton visible but not enabled. Therefore the user cannot process any

If the settings have been provided properly and the CEU is available the

blue color (and the log in screen start automatically).

No connection to CEU.

Connected to CEU, but user not yet logged on.

Connected to CEU and user logged on.

Rev. Date:

8.16.2010

of 23

has been installed on the device it can be used to

a valid PowerPick Global

with PP.Mobile2. The following

(red information bar)


utton visible but not enabled. Therefore the user cannot process any functions of

If the settings have been provided properly and the CEU is available the information bar has a

Title:



3.2 Set up the CEU

Figure

PP.Mobile2 needs a CEU setting to access the PowerPick Global web services

host IP address of the CEU and the port number defined in the System Configuration for CEU web services in

PP.Win. After providing a station name which is comparabl

PowerPick Global the Test button can be

Test button , open internet explorer to test the http connection to the CEU

Test button, status not yet tested.

WebService test connection to the CEU.

Test button, status test was not successful.


Test button, status test was successful.


Mobile Devices

Rev:

28

Rev.

8.16.2010

2012

Figure 8: CEU needs to be set in the CEU settings form

setting to access the PowerPick Global web services. The credentials for this setting is a

and the port number defined in the System Configuration for CEU web services in

name which is comparable with the station name defined in the warehouse in

est button can be invoked to verify the accessibility of a CEU.

Test button , open internet explorer to test the http connection to the CEU

Test button, status not yet tested.


Test button, status test was not successful.


Test button, status test was successful.


Rev. Date:

8.16.2010

of 23

The credentials for this setting is a

and the port number defined in the System Configuration for CEU web services in

e with the station name defined in the warehouse in

Title:



3.3 Set up the Language

English is the default language inside PP.Mobile2 for the most texts. But during the work it can be that any texts will

come from the system or from CEU. These special texts will not translated from the PP.Mobile2.

To configure and update the default texts

PP.Mobile2.cab is not installing any additional language file. After setup the connection to CEU they can be

downloaded automatically from the CEU (no ActiveSync or Window

Save and reload the selected language file.

Cancel the form.

Download the PP.Mobile2 language files from CEU (for initial and later update possible).

Mobile Devices

Rev:

28

Rev.

8.16.2010

2012



To configure and update the default texts of PP.Mobile2:

Figure 9: Language configuration


downloaded automatically from the CEU (no ActiveSync or Window Mobile Device Center needed).

Save and reload the selected language file.

Cancel the form.


Rev. Date:

8.16.2010

of 23




Mobile Device Center needed).


Title:



3.4 Log in to PowerPick Global

Figure 10: The Log In: verify user,

The user has the possibility to choose a language. If no language is selected in the combo box, PP.Mobile2 check the

default language of the user, if that is also default PP.Mobile2 take the stan

To confirm the input and process the log on.

Cancel the log on, PP.Mobile2 switch then in to “not logged on” status.

Mobile Devices

Rev:

28

Rev.

8.16.2010

2012

Log in to PowerPick Global

: The Log In: verify user, password and optional language


default language of the user, if that is also default PP.Mobile2 take the standard language of his own settings.

To confirm the input and process the log on.

Cancel the log on, PP.Mobile2 switch then in to “not logged on” status.

Rev. Date:

8.16.2010

of 23

and optional language


dard language of his own settings.

Title:



3.5 Main Screen

Figure

Figure 12

Log on.

Page navigation

Back to the preview menu

Exit Application

System Settings

Manual handling

Order handling

Location handling

Mobile Devices

Rev:

28

Rev.

8.16.2010

2012

Figure 11: The main screen with main menu

12: Example: The main screen with sup menu order

Back to the preview menu

Rev. Date:

8.16.2010

of 23

: Example: The main screen with sup menu order

Title:



3.6 Manual flow

3.6.1 Put & Pick

Figure

On the first screen can be entered the material that has to handle

created (center). One element of the list shows in the first line the material and in the second line the quantity.

If the text box is not empty, PP.Mobile2 check if the value is a valid material and show the next screen

to create a new manual position.

If the text box is empty and there still positions in the list, PP.Mobile2 starting the confirmation

processing.

If the list is empty, the form will close and PP.Mobile2 jumps back to the

Otherwise it will show the actual option menu.

Option menu item:

Remove all manual X (depending to the mode, put or pick) from the database.

Close manual form and move back to the manual menu. Existing positions remain there.

Mobile Devices

Rev:

28

Rev.

8.16.2010

2012

Figure 13: As example the first manual put screen

(pick has the same flow and style)

be entered the material that has to handle (above). And a list of all manual lines they already

nter). One element of the list shows in the first line the material and in the second line the quantity.


to create a new manual position.

t box is empty and there still positions in the list, PP.Mobile2 starting the confirmation

If the list is empty, the form will close and PP.Mobile2 jumps back to the manual

Otherwise it will show the actual option menu.



Rev. Date:

8.16.2010

of 23

. And a list of all manual lines they already

nter). One element of the list shows in the first line the material and in the second line the quantity.


t box is empty and there still positions in the list, PP.Mobile2 starting the confirmation

manual menu.



Title:



Scenario: Entered into the text box the material name “005”:

Figure 14

To create a manual position any information needed. Especially for put the bin is required. But depending to the

material properties behind the selected m

- Lot

- Serial Number

- Expiry Date

- Production Date

- Release Date

- Qualification

- Quantity

PP.Mobile2 show in the label above the text box which input is request. After entering or choosing PP.Mobile2

checks the value and will show the next request until all required information’s are given to create the manual

position. After a position is created, PP.Mobile2 go back to the first manual screen.

Confirm the actual input request.

Cancel creating a manual position and go

Combo Box:

The user can enter or scan the value inside the text box, or click that button to open a list. Inside the

list the user can choose one element and confirm

Mobile Devices

Rev:

28

Rev.

8.16.2010

2012

Scenario: Entered into the text box the material name “005”:

14: Creating manual position, check information’s

after show the input screen


material properties behind the selected material PP.Mobile2 will also ask for:


show the next request until all required information’s are given to create the manual

After a position is created, PP.Mobile2 go back to the first manual screen.


Cancel creating a manual position and go back to the first manual screen.


list the user can choose one element and confirm the takeover by pressing RETURN.

Rev. Date:

8.16.2010

of 23



show the next request until all required information’s are given to create the manual


the takeover by pressing RETURN.

Title:



3.6.2 Direct Put

Direct put or direct store means the possibility to place the goods on a location and tell the software where it has to

store. In that case PP.Mobile2 is not sending move commands to machines or give a location proposal.


checks the value and will show the next request until all required information’s are given to create the

command. After direct store succeeded PP.Mobile2 clear the screen and waiting for the next direct store input.

To store direct the user has to enter first the “Material” and the “Location Name”. After, depending to the material

property, the following information´s also requested:

- Lot

- Serial Number

- Expiry Date

- Production Date

- Release Date

- Qualification

- Quantity


Close the direct store screen and PP.Mobile2 jumps back to the manual menu.

Combo Box:



Mobile Devices

Rev:

28

Rev.

8.16.2010

2012

put or direct store means the possibility to place the goods on a location and tell the software where it has to


Figure 15: First step of direct storing


checks the value and will show the next request until all required information’s are given to create the

After direct store succeeded PP.Mobile2 clear the screen and waiting for the next direct store input.


ormation´s also requested:



enter or scan the value inside the text box, or click that button to open a list. Inside the


Rev. Date:

8.16.2010

of 23

put or direct store means the possibility to place the goods on a location and tell the software where it has to



checks the value and will show the next request until all required information’s are given to create the direct store

After direct store succeeded PP.Mobile2 clear the screen and waiting for the next direct store input.



enter or scan the value inside the text box, or click that button to open a list. Inside the


Title:



3.7 Order managed flow

Orders means, on PP.Win or imported from a host system con

station but on the whole PP.Warehouse

3.7.1 Order Select

Order select is the fast way to start a couple of orders. For example a scenario:

The user has fife order request form in front. He scan each

After each scan PP.Mobile2 check, if the order …

- … is known

- … is valid

- … has the same direction as the order before

If it is, PP.Mobile2 note that order into a buffer list and the user scan the next order. After he sca

press “Process” on the screen or “RETURN” on the key board (the input box must be empty). PP.Mobile2 try now

to allocate that buffered orders and start after the confirmation process.

If the text box for the order name is empty and the user press “Process”, PP.Mobile2 check if any order is written in

the list below. If not it will inform the user to enter first any orders. If it is PP.Mobile2 will try to start the

confirmation process for the orders inside the list.

If the text box for the order name is not empty, PP.Mobile2 try to find a order name with that valued name.

Therefore is to known:

- The order direction is chosen by the first scanned order.

Is the list empty, any order directions can chosen. To process a mix of put and pick orders is not possible!

- The order or any of the lines may not

- If it is a pick order, depending to the CEU configuration ask PP.Mobile2 for the Handling Unit.

(Can be turn on or off on PP.Win).

Mobile Devices

Rev:

28

Rev.

8.16.2010

2012

Orders means, on PP.Win or imported from a host system contracts they relate not only to

PP.Warehouse.

Order select is the fast way to start a couple of orders. For example a scenario:

The user has fife order request form in front. He scan each order barcode (on each paper is one).

, if the order …

… has the same direction as the order before

If it is, PP.Mobile2 note that order into a buffer list and the user scan the next order. After he sca


to allocate that buffered orders and start after the confirmation process.

Figure 16: collect order to be processed



rmation process for the orders inside the list.


The order direction is chosen by the first scanned order.

any order directions can chosen. To process a mix of put and pick orders is not possible!

The order or any of the lines may not link to a batch.

If it is a pick order, depending to the CEU configuration ask PP.Mobile2 for the Handling Unit.

or off on PP.Win).

Rev. Date:

8.16.2010

of 23

to enter the local area of a

order barcode (on each paper is one).

If it is, PP.Mobile2 note that order into a buffer list and the user scan the next order. After he scanned all orders he





any order directions can chosen. To process a mix of put and pick orders is not possible!

If it is a pick order, depending to the CEU configuration ask PP.Mobile2 for the Handling Unit.

Title:



If the text box is not empty, process the order validation.

If the text box is empty, process the confirmation of the buffered orders.

If the order list is empty, close the form and PP.Mobile2 jump back to the order menu.

If the list is not empty, shows the navigation screen.

Option item to reset the buffer list.

Option item to close the form and jump back to order menu.

The buffer order list is not saved!

Mobile Devices

Rev:

28

Rev.

8.16.2010

2012

If the text box is not empty, process the order validation.

If the text box is empty, process the confirmation of the buffered orders.


the list is not empty, shows the navigation screen.

Option item to reset the buffer list.

Option item to close the form and jump back to order menu.

The buffer order list is not saved!

Rev. Date:

8.16.2010

of 23


Title:



3.7.2 Order List

Figure 17: First step of order list, choosing direction

and “IN” filter

Figure 17 is shown the filter screen of the list. The user has to select hear the direction type he want to see. Also he

has the possibility to enter first a filter value, that value is used for a “contains text” filtering of the master order

name. The filter value is not a mandatory.

In Figure 18 is shown the list that is shown after a direction is chosen. At the top th

(depends to the filter result, the count of orders) and

[Order Count]). The user can click the order line to check or uncheck the order. If the to check order is a pic

order, the request to enter the handling unit will shown (depending to the CEU configuration).

The lines show the following information’s:

- Order Name

- Handling Rank (automatically calculated of the checked lines)

- Handling Unit Name (depending of the

Start the confirmation process of the checked orders.

Cancel the list screen and PP.Mobile2 jump back to the list filter screen.

Page navigation.

Note: If found PP.Mobile2 the value of the text box as order (

directly the confirmation process for that single order.

Mobile Devices

Rev:

28

Rev.

8.16.2010

2012

of order list, choosing direction

and “IN” filter Figure 18: Second step of order list, choosing orders

the filter screen of the list. The user has to select hear the direction type he want to see. Also he


The filter value is not a mandatory.

is shown the list that is shown after a direction is chosen. At the top the navigation buttons are shown

(depends to the filter result, the count of orders) and an information label ([Checked Orders] / [Actual Index] /

The user can click the order line to check or uncheck the order. If the to check order is a pic


The lines show the following information’s:

Handling Rank (automatically calculated of the checked lines)

Handling Unit Name (depending of the CEU setting and the direction type)

Start the confirmation process of the checked orders.


If found PP.Mobile2 the value of the text box as order (Figure 17), PP.Mobile2 is not shown the list it is starting

directly the confirmation process for that single order.

Rev. Date:

8.16.2010

of 23

: Second step of order list, choosing orders

the filter screen of the list. The user has to select hear the direction type he want to see. Also he


e navigation buttons are shown

information label ([Checked Orders] / [Actual Index] /

The user can click the order line to check or uncheck the order. If the to check order is a picking


), PP.Mobile2 is not shown the list it is starting

Title:



3.7.3 Batch List

Figure 19: First step of batch list

Figure 20 is shown the filter screen of the list. The user has possibility to enter a filter value, that value is used for a

“contains text” filtering of the batch name. The filter value is

In Figure 20 is shown the list. At the top the navigation buttons are shown (depends to the filter result, the count of

batches) and an information label ([Checked Batches] / [Actual Index] / [Batch Count]). The user can click the batch

line to check or uncheck the batch. Only one line can checked at the same time.

Start the confirmation process of the checked


Page navigation.

Note: If found PP.Mobile2 the value of the text

directly the confirmation process for that single b

Mobile Devices

Rev:

28

Rev.

8.16.2010

2012

: First step of batch list Figure 20: Second step of batch list, choosing orders

is shown the filter screen of the list. The user has possibility to enter a filter value, that value is used for a

“contains text” filtering of the batch name. The filter value is not a mandatory.

is shown the list. At the top the navigation buttons are shown (depends to the filter result, the count of


tch. Only one line can checked at the same time.

Start the confirmation process of the checked batch.


If found PP.Mobile2 the value of the text box as batch (Figure 20), PP.Mobile2 is not shown the list it is starting

directly the confirmation process for that single batch.

Rev. Date:

8.16.2010

of 23

: Second step of batch list, choosing orders

is shown the filter screen of the list. The user has possibility to enter a filter value, that value is used for a

is shown the list. At the top the navigation buttons are shown (depends to the filter result, the count of


), PP.Mobile2 is not shown the list it is starting

Title:



3.7.4 View Location / Quantity change

Figure 22: Second step choose break down

In Figure 21 the user has to enter / scan the location name

the location it will show Figure 22. There PP.Mobile2 will show the location

location index and found breakdown count

To change now the quantity of a break down, the user has to enter the location name (

break down in foreground (Figure 22

again the screen to Figure 23. In Figure

down.

Mobile Devices

Rev:

28

Rev.

8.16.2010

2012

View Location / Quantity change

Figure 21: First step enter location name

: Second step choose break down Figure 23: Second step change quantity

the user has to enter / scan the location name and press enter on the keyboard

. There PP.Mobile2 will show the location information (bottom) and the actual

location index and found breakdown count (top).

To change now the quantity of a break down, the user has to enter the location name (Figure

22) and click “Change Quantity” (bottom right of Figure

Figure 23 PP.Mobile2 request from the user the new actual

Rev. Date:

8.16.2010

of 23

: Second step change quantity

and press enter on the keyboard. If PP.Mobile2 can find

information (bottom) and the actual

Figure 21), brings the desired

Figure 22). PP.Mobile2 switch

PP.Mobile2 request from the user the new actual quantity for that break

Title:



Figure 22: PP.Mobile2 open screen

Figure 23: Confirm the entered new location quantity.

Figure 21: PP.Mobile2 close the form and jump back to the location menu

Figure 22: PP.Mobile2 jump back to

Figure 23: PP.Mobile2 jump back to

Location breakdown navigation.

Mobile Devices

Rev:

28

Rev.

8.16.2010

2012

: PP.Mobile2 open screen Figure 23 for the actual shown brea

: Confirm the entered new location quantity.

: PP.Mobile2 close the form and jump back to the location menu

: PP.Mobile2 jump back to Figure 21

: PP.Mobile2 jump back to Figure 22

Location breakdown navigation.

Rev. Date:

8.16.2010

of 23

for the actual shown break down

: PP.Mobile2 close the form and jump back to the location menu

Title:



3.7.5 Confirmation process

The confirmation process can be start from

- Manual put / pick

- Order Select

- Order List

- Batch List

Figure 24: Starting confirmation process

Figure 26: Process status information

(no process change possible)

In Figure 24 PP.Mobile2 starting up the confirmation processor. It checks if the WorkFlow

transmit the orders / batch to the WorkFlow

After Figure 24 PP.Mobile2 is controlled by the WorkFlow

Figure 25 request from the user to select the area where he want to work next. After,

the related storage units until the first arrives

the shown task for confirmation.

Mobile Devices

Rev:

28

Rev.

8.16.2010

2012

The confirmation process can be start from

: Starting confirmation process Figure 25: Area selection

: Process status information

(no process change possible)

Figure 27: Task confirmation

PP.Mobile2 starting up the confirmation processor. It checks if the WorkFlow

transmit the orders / batch to the WorkFlow – Engine and any more.

PP.Mobile2 is controlled by the WorkFlow – Engine of Power Pick Global

request from the user to select the area where he want to work next. After, Figure

the related storage units until the first arrives. And in Figure 27 the user has to enter the requested inputs (bottom) of

Rev. Date:

8.16.2010

of 23

: Area selection

: Task confirmation

PP.Mobile2 starting up the confirmation processor. It checks if the WorkFlow– Engine is running,

Engine of Power Pick Global (same as PP.Windows).

Figure 26 shows the status of

the user has to enter the requested inputs (bottom) of

Title:



Figure 28: Cancel menu of

To confirm the actual requested

Depends on the step opens a cancel menu (

processor.

Open the process selection screen.

Restart actual task and redrive therefore the actual process.

Moves the actual task to the end of the confirmation buffer.

Remove the actual task from the confirmation buffer.

Hide the close menu and shows again the screen where called from of the

Close the confirmation processor.

Mobile Devices

Rev:

28

Rev.

8.16.2010

2012

: Cancel menu of Figure 26 Figure 29: Cancel menu of

To confirm the actual requested input.

Depends on the step opens a cancel menu (Figure 28 or Figure 29) or close the confirmation

Open the process selection screen.

actual task and redrive therefore the actual process.

Moves the actual task to the end of the confirmation buffer.

Remove the actual task from the confirmation buffer.

Hide the close menu and shows again the screen where called from of the confirmation processor.

Close the confirmation processor.

Rev. Date:

8.16.2010

of 23

: Cancel menu of Figure 27

) or close the confirmation

confirmation processor.

power pick global -...

Documents