potain igo 50 - manitowoc company

Potain Igo 50Product Guide

Features• 4000 kg (8818 lb)

maximum capacity

• 1 100 kg (2425 lb) capacity at

131 ft (40 m)

• 40 m (131 ft) maximum operating

hook radius

• 33,8 m (111 ft) maximum hook

height with jib set at 20°

• 23,2 m (76 ft) maximum hook

height with jib horizontal

FEM 1.001-A3

2

Features

Variable frequency drivesVariable frequency drives provide a lower initial current rush and progressive speed change which can be supported by a smaller generator set than comparable cranes.

Optional cabOptional fixed height cab and access ladder allows operator to view the job site from a more advantageous position.

North American Highway AxleSimplify road transport with the North American High-way Axle and adaptation kit 202. Multiple pin positions for optimal weight distribution, DOT compliance and an optional attachable 3rd axle make this an ideal solution for your transportation needs.

Efficiency and reliabilityThe Igo 50 has a simple and quick set up. While onsite, the crane works quietly, reducing interruption to the surrounding area.

Contents

Specifications 4

Transport 5

Dimensions 7

Load charts 8

Crane profile 9

Mechanisms 10

Metric dimensions 11

Metric load charts 12

Metric crane profile 13

Metric mechanisms 14

Symbols glossary 15

4*Denotes optional equipment

**Requires optional anemometer

Specifications

Jib

40 m (131 ft) radius standard bi-folding offsettable lattice jib. Removable jib extensions can allow additional horizontal jib operating radii of 28 m (92 ft) or 36 m (118 ft).Two (2) tie bar lines with adjustable lengths allow jib to be offset 8˚ and 20˚. Folds to 14 m (46 ft) radius or 29,6 m (97 ft) radius. Two (2) erecting speeds controlled from the remote, opening and aligning are carried out automatically by two (2) hydraulic cylinders.

Galvanized folding mast with hydraulic cylinder for erection. Two (2) erecting speeds controlled from the remote. No locking necessary. 360˚ rotation possible during erection.

Outriggers swing and lock into position. 4,5 m (14.8 ft) square outrigger spread with 2,5 m (8.2 ft) slewing radius. Level bubble integrated into the chassis. Outrigger pads are stowed on the crane during transport (540 x 410 mm [21 in x 16 in]). *Optional outrigger pads available at heights of 200 mm (7.9 in) and 400 mm (15.7 in).

5640 kg (12,434 lb) concrete ballast standard. Crane with standard ballast is able to be transported on several *axle sets. *Additional 22 800 kg (50,268 lb) concrete ballast optional.

480 volt, 60 Hz measured at the turntable. Earth rod and electric cable stowed on the crane during transport.

SM/DM block for 2 or 4-part line. One pin removal to change between SM and DM. Pure SM1 (section of hook block removed) is possible with gain of 100 kg (220 lb) lifting capacity.

Wireless remote control provides information to the operator about **wind speed, radius, hook height, load, and moment. Lights and buzzers alert the operator when nearing limits of operation.

Auxiliary remote attached by umbilical cord ensures continual operation in case of battery or other malfunction of the wireless remote control.

Electronic wind speed meter to alert the operator of windspeed conditions. Provides selective display on the radioremote. Maximum in service wind speed is 72 km/h(45 mph) and maximum out of service wind speed is150 km/h (93 mph).

RVF 51 Optima+ slewing mechanism with maximum swing speed of 0.8 RPM. Progressive control of speed with counter-slewing possible, anti-load swinging system makes aligning the load and jib easier. Multiple RPM speeds possible depending upon parameter selected.

15 LVF 10 Optima: 15 HP variable frequency hoist with 1t (1.1 USt) line pull. 3 notch, progressive speed change according to the accelerating or decelerating ramps. Optima allows the hoist to adapt its speed to the weight of the load.

3 DVF 5: 3 HP variable frequency hoist with 500 kg (1102 lb) line pull. 2 notch winch, progressive speed change according to acceleration or deceleration ramps controlled by the frequency converter.

Four (4) cylinders and two (2) pumps linked to solenoid valves. Two (2) cylinders for unfolding the jib, one (1) for slewing the derrick, and one (1) for raising the mast.

* STANDARD NORTH AMERICAN SPECIFICATION: includes hydraulic ballasting derrick, high sole plates, Dialog Wind, 12 concrete counterweight slabs, pre-equipment for interference system and Top Zone.

* High sole plates * Fixed height cab and access ladder* Transport axles and kits* Top Zone* Top Tracing* Dialog Wind

Mast

Chassis

*Ballast

Electrical requirement

Reeving

*Optional Anemometer

Controls

Swing

Hoist

Trolley

Hydraulic equipment

*Optional equipment

Uses the hoisting winch to ballast the crane or dismantle/attach *fifth-wheel. Stows alongside the jib during transport.

Optional hydraulic ballasting derrick

Axle sets are available for both jobsite and highway applications. Jobsite axles are rated at either 10 kph (6 mph) or 25 kph (15.5 mph); highway axle set is rated at 80 kph (50 mph).

*Optional transport axle sets

5Potain Igo 50

NOTE: Dimensions and weights may vary due to manufacturing tolerances.

Transport

13,98 m (45.9 ft)

P2 P P1

15,41 m (50.6 ft)

13,98 m (45.9 ft)

5,24 m (17.2 ft)5,88 m (19.3 ft)3,65 m (12 ft)

0,7 m (2.3 ft)1,25 m (4.1 ft)

4 m

(13.

1 ft)

2,5 m (8.2 ft)

2,45 m (8 ft)

P2 P P1

16,39 m (53.8 ft)

5,87 m (19.3 ft)

5,25 m (17.2 ft)

2,75 m (9 ft)

Max

: 3,

57 m

(11.7

ft)

Min

: 3,

42 m

(11.

2 ft

)

Max: 0,35 m (1.1 ft)Min: 0,2 m (0.7 ft)

2,5 m (8.2 ft)

2,4 m (7.9 ft)

DJ100 / S12010 km/h (6 mph)

SL122 / J215M80 km/h (50 mph)

P2 P P1

15,41 m (50.6 ft)

13,98 m (45.9 ft)

6,19 m (20.3 ft)4,93 m (16.2 ft)3,65 m (12 ft)

0,7 m (2.3 ft)1,25 m (4.1 ft)

4 m

(13.

1 ft)

2,5 m (8.2 ft)

2,45 m (8 ft)

6NOTE: Dimensions and weights may vary due to manufacturing tolerances.

Transport

Chassis data (in transport position)

DJ100/S12025 kph (15.5 mph)

SL122/J215M80 kph (50 mph)

North AmericanHighway Axle

meters feet meters feet meters feet

Overall length 16,39 53.8 15,41 50.6 15,41 50.6

Overall height Max: 3,57Min: 3,42

Max: 11.7Min: 11.2

4 13.1 4 13.1

Overall width 2,5 8.2 2,5 8.2 2,6 8.2

Overhang 5,87 19.3 6,19 20.3 TBA TBA

North American Highway Axle

Weights

Crane weight less counterweight

14 760 kg 32,540 lb

Counterweight for operation

28 440 kg 62,700 lb

Crane with counterweight 43 240 kg 95,328 lb

Crane with transport equipment

DJ100/S12025 kph (15.5 mph)

SL122/J215M80 kph (50 mph)

North AmericanHighway Axle

In transport with minimal counterweight:

kilograms pounds kilograms pounds kilograms pounds

Gross (P) 21 655 47,741 23 650 52,139 TBA TBA

Rear (P1) 11 725 25,849 15 400 33,951 TBA TBA

Front (P2) 9930 21,892 8250 18,188 TBA TBA

Counterweight intransport (2 blocks):

5640 12,434 5640 12,434 TBA TBA

*Other axle sets are available.

15,41 m (50.6 ft)

13,98 m (45.9 ft) 2,5 m (8.2 ft)

2,6 m (8.5 ft)1,25 m (4.1 ft)

4 m

(13.

1 ft)

3,65 m (12 ft) TBA TBA

P1PP2

0,7 m (2.3 ft)

131 ft 76 ft21

1400 kg

118 ft

97 ft

4409 lb52 ft

46 ft

14.8 ft x 14.8 ft

16.7 ft

86 ft

R = 8.2 ft

5.7 ft

8818 lb

92 ft

46 ft

4.6 ft

247 ft1

8818 lb

43 ft9.8 ft68 ft

70 ft

73 ft

3748 lb

8818 lb

8818 lb

73 ft

2425 lb

75 ft

3086 lb

7Potain Igo 50

Dimensions

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane

F1

F1 30.3 USt 23.9 USt

32,540 lb

62,702 lb(2 x 6217 lb + 12 x 4189 lb)

8

Load charts

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.

131 ft 10 74 78 82 89 98 105 115 121 130 ft4409 4134 3924 3571 3131 2888 2579 2403 2205 lb

4409 4189 3825 3373 3131 2811 2624 2425 lb

118 ft 10 82 86 89 98 105 115 117 ft4409 4167 4023 3549 3274 2932 2866 lb

4409 4266 3770 3494 3153 3086 lb

92 ft 10 91 ft4409 lb4409 lb

131 ft 10 80 84 89 96 ft118 ft 4409 4167 3902 3527 lb

4409 4123 3748 lb

131 ft118 ft 10 46 ft92 ft 4409 lb

4409 lb

10 43 46 49 52 56 59 62 66 75 79 82 89 98 105 115 121 131 ft8818 8080 7419 6845 6360 5930 5556 5214 4409 4134 3968 3616 3175 2932 2612 2436 2205 lb

4409 4134 3968 3616 3175 2932 2612 2436 2205 lb4409 4233 3869 3417 3164 2844 2668 2425 lb

10 47 49 52 56 59 62 66 72 79 83 87 89 98 105 115 118 ft8818 8311 7683 7132 6658 6239 5864 5225 4707 4409 4167 4079 3594 3318 2965 2866 lb

4409 4167 4079 3594 3318 2965 2866 lb4409 4321 3825 3549 3197 3086 lb

10 52 56 59 62 66 72 75 82 85 89 92 ft8818 8014 7485 7011 6592 5886 5578 5049 4828 4608 4409 lb

4409 lb4409 lb

131 ft 10 46 49 52 56 59 62 66 72 81 82 85 89 97 ft118 ft 8818 8058 7441 6911 6449 6041 5677 5060 4409 4332 4167 3946 3527 lb

4409 4332 4167 3946 3527 lb4409 4178 3748 lb

131 ft 10 46 ft8818 lb4409 lb4409 lb

118 ft 10 46 ft8818 lb4409 lb4409 lb

92 ft 10 46 ft8818 lb4409 lb4409 lb

131 ft 10 123 ft2205 lb2425 lb

118 ft 10 111 ft2205 lb2425 lb

92 ft 10 87 ft2205 lb2425 lb

131 ft 10 92 ft118 ft 2205 lb

2425 lb

131 ft118 ft 10 44 ft92 ft 2205 lb

2425 lb

2425 lb

118 ft92 ft 131 ft

3086 lb4409 lb8818 lb

46 ft

3748 lb

97 ft

8°

3748 lb

96 ft

80 ft

117 ft

3086 lb

83 ft

2425 lb

86 ft

130 ft

46 ft

4409 lb

72 ft

4409 lb

91 ft

79 ft

20°

111 ft

123 ft

2425 lb111 ft

2425 lb

106 ft

92 ft

2425 lb

98 ft44 ft

2425 lb

80 ft

87 ft

2425 lb

97 ft

9Potain Igo 50

Crane profile


125 ft

20 13 7 0 7 13 20 26 33 39 46 52 59 66 72 79 85 92 98 105 112 118 125 131 138 ft

7

13

20

26

33

39

46

52

59

66

72

79

85

92

98

105

112

118

0

≤ 31 mph

Igo 50: Raised jibs

20 13 7 0 7 13 20 26 33 39 46 52 59 66 72 79 85 92 98 105 118 131 ft

131 ft

125

118

112

105

98

92

85

79

72

66

59

52

46

39

33

26

20

13

7

0

Jib raised 20°

123 ft111 ft92 ft

87 ft

44 ft

10 ft

20° 80 ft

97 ft98 ft

106 ft111 ft

20 13 7 0 7 13 20 26 33 39 46 52 59 66 72 79 85 92 98 105 118 131 ft

131 ft

125

118

112

105

98

92

85

79

72

66

59

52

46

39

33

26

20

13

7

0

8°

86 ft

130 ft117 ft91 ft

96 ft

46 ft

83 ft80 ft79 ft

72 ft

9.8 ft

Jib raised 8°

10

Mechanisms


15 LVF 10 Optima

IEC 60204-32

400 V (+10% -10%) 50 Hz / 480 V (+6% -10%) 60 Hz 17 kVA

19 kVA

4409 lb

+25 %

1102 2205

fpm

0

218

167

102

0

480 V - 60 Hz hp kW

15 LVF 10 Optima

ft/min 12 59 102 167 218 6 30 51 84 10815 11

lb 4409 4409 4409 2205 1102 8818 8818 8818 4409 2205

3 DVF 5 ft/min49 - 98 - 148 (0 2205 lb)

49 - 98 - 135 (2205 8818 lb)3 2.2

RVF 51 Optima+ rpm 0 0.8 5.5 4

11Potain Igo 50

Metric dimensions


40 m 23,2 m21

1400 kg

36 m

29,6 m

2000 kg15,7 m

14 m

4,5 m x 4,5 m

5,09 m

26,3 m

R = 2,5 m

1,75 m

4000 kg

28 m

13,9 m

1,4 m

214,3 m1

4000 kg

13 m3 m20,8 m

21,3 m

22,4 m

1700 kg

4000 kg

4000 kg

22,3 m

1100 kg

22,9 m

1400 kg

F1

F1 27,5 t 21,7 t

14 760 kg

28 440 kg(2 x 2820 kg + 12 x 1900 kg)

12

Metric load charts


40 m 3 22,7 23,9 25 27 30 32 35 37 39,6 m2000 1875 1780 1620 1420 1310 1170 1090 1000 kg

2000 1900 1735 1530 1420 1275 1190 1100 kg

36 m 3 25,1 26,3 27 30 32 35 35,6 m2000 1890 1825 1610 1485 1330 1300 kg

2000 1935 1710 1585 1430 1400 kg

28 m 3 27,7 m2000 kg2000 kg

40 m 3 24,4 25,5 27 29,3 m36 m 2000 1890 1770 1600 kg

2000 1870 1700 kg

40 m36 m 3 13,9 m28 m 2000 kg

2000 kg

3 13 14 15 16 17 18 19 20 23 24,2 25 27 30 32 35 37 40 m4000 3665 3365 3105 2885 2690 2520 2365 2000 1875 1800 1640 1440 1330 1185 1105 1000 kg

2000 1875 1800 1640 1440 1330 1185 1105 1000 kg2000 1920 1755 1550 1435 1290 1210 1100 kg

3 14,3 15 16 17 18 19 20 22 24 25,3 26,6 27 30 32 35 36 m4000 3770 3485 3235 3020 2830 2660 2370 2135 2000 1890 1850 1630 1505 1345 1300 kg

2000 1890 1850 1630 1505 1345 1300 kg2000 1960 1735 1610 1450 1400 kg

3 15,7 17 18 19 20 22 23 25 26 27 28 m4000 3635 3395 3180 2990 2670 2530 2290 2190 2090 2000 kg

2000 kg2000 kg

40 m 3 13,9 15 16 17 18 19 20 22 24,7 25 25,8 27 29,6 m36 m 4000 3655 3375 3135 2925 2740 2575 2295 2000 1965 1890 1790 1600 kg

2000 1965 1890 1790 1600 kg2000 1895 1700 kg

40 m 3 14 m4000 kg2000 kg2000 kg

36 m 3 14 m4000 kg2000 kg2000 kg

28 m 3 14 m4000 kg2000 kg2000 kg

40 m 3 37,6 m1000 kg1100 kg

36 m 3 33,9 m1000 kg1100 kg

28 m 3 26,4 m1000 kg1100 kg

40 m 3 27,9 m36 m 1000 kg

1100 kg

40 m36 m 3 13,4 m28 m 1000 kg

1100 kg

1100 kg

36 m28 m 40m

1400 kg2000 kg4000 kg

14 m

1700 kg

29,6 m

8°

1700 kg

29,3 m

24,4 m

35,6 m

1400 kg

25,4 m

1100 kg

26,2 m

39,6 m

13,9 m

2000 kg

22 m

2000 kg

27,7 m

24,2 m

20°

33,8 m

37,6 m

1100 kg33,9 m

1100 kg

32,2 m

27,9 m

1100 kg

29,8 m13,4 m

1100 kg

24,5 m

26,4 m

1100 kg

29,6 m

13Potain Igo 50

Metric crane profile


Igo 50: Raised jibs

38 m

6 4 2 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 m

2

4

6

8

10

12

14

16

18

20

22

24

26

28

30

32

34

36

0

≤ 50 km/h

6 4 2 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 m

40 m

38

36

34

32

30

28

26

24

22

20

18

16

14

12

10

8

6

4

2

0

Jib raised 20°

37,6 m33,9 m27,9 m

26,4 m

13,4 m

3 m

20° 24,5 m

29,6 m29,8 m

32,2 m33,8 m

6 4 2 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 m

40 m

38

36

34

32

30

28

26

24

22

20

18

16

14

12

10

8

6

4

2

0

8°

26,2 m

39,6 m35,6 m27,7 m

29,3 m

13,9 m

25,4 m24,4 m24,2 m

22 m

3 m

Jib raised 8°

14

Metric mechanisms


15 LVF 10 Optima

IEC 60204-32

400 V (+10% -10%) 50 Hz / 480 V (+6% -10%) 60 Hz 17 kVA

19 kVA

2000 kg

+25 %

500 1000

m/min

0

66,5

51

31

0

480 V - 60 Hz hp kW

15 LVF 10 Optima

m/min 3,6 18 31 51 66,5 1,8 9 15,5 25,5 3315 11

kg 2000 2000 2000 1000 500 4000 4000 4000 2000 1000

3 DVF 5 m/min15 - 30 - 45 (0 1000 kg)

15 - 30 - 41 (1000 4000 kg)3 2,2

RVF 51 Optima+ rpm 0 0,8 5,5 4

15Potain Igo 50

Symbols glossary

Anemometer

Ballast

Chassis

Controls

Hydraulic equipment

Electrical equipment

Hoisting

Jib

Mast

Consult us

Optional transport axle sets

Options

Reactions in service

Reactions out of service

Reeving

Required power

Slewing

Standard equipment

Total ballast weight

Trolleying

Weight without load, without ballast, without transport axles, with max. jib and standard height

Slewing radius

Optional hyrdaulicballasting derrick

R

Reeving 2-part

Reeving 4-part

©2014 ManitowocForm No. Igo 50 PGPart No. 04-029-1M-0814 www.manitowoccranes.com

This document is non-contractual. Constant improvement and engineering progress make it necessary that we reserve the right to make specification, equip-ment, and price changes without notice. Illustrations shown may include optional equipment and accessories and may not include all standard equipment.

Regional offices

ChinaShanghai, China Tel: +86 21 6457 0066Fax: +86 21 6457 4955

Greater Asia-Pacific Singapore Tel: +65 6264 1188 Fax: +65 6862 4040

Europe, Middle East, Africa Dardilly, France Tel: +33 (0)4 72 18 20 20 Fax: +33 (0)4 72 18 20 00

Americas Manitowoc, Wisconsin, USA Tel: +1 920 684 6621 Fax: +1 920 683 6277

Shady Grove, Pennsylvania, USA Tel: +1 717 597 8121 Fax: +1 717 597 4062

Regional headquarters

Manitowoc Cranes

ChinaBeijingChengduGuangzhouXian

Greater Asia-PacificAustraliaBrisbaneMelbourneSydneyIndiaChennaiDelhiHyderabadPuneKoreaSeoulPhilippinesMakati CitySingapore

FactoriesBrazilPasso FundoChinaTaiAnZhangjiagangFranceCharlieuMoulinsGermanyWilhelmshavenIndiaPuneItalyNiella TanaroPortugalBaltarFânzeresUSAManitowoc Port WashingtonShady Grove

AmericasBrazilAlphavilleMexicoMonterreyChileSantiago

Europe, Middle East, AfricaFranceBaudemontCergyDecinesGermanyLangenfeldItalyLainateNetherlandsBredaPolandWarsawPortugalBaltarRussiaMoscowSouth AfricaJohannesburgU.A.E.DubaiU.K.Buckingham

potain igo 50 - manitowoc company

Documents