posted february 3, 2016---addendum #1 see pages 27-37...

Posted February 3, 2016---Addendum #1 See pages 27-37 - Work Write Up Sheets

of 260

Administrator:

Head of HH Name:

Street Address:City, State:

MISCELLANEOUS Quantity Units Cost Estimate Total

Debris Removal LS 1

Final Clean LS 1

Building Permits LS 1

Lead-based Paint Testing

BUILDLING EXTERIOR & ATTIC Quantity Units Cost Estimate Total

Foundation

Grading & Drainage

20 L.FT

Roof Covering

Roof Structure

Exterior Walls

Exterior Doors

Chimney

Exterior Lighting

Decks/Porches/Ramps 35 Sq.Ft

Attic insulation

Garage Quantity Units Cost Estimate Total

Flooring12 Sq.Ft

1 Each

MAIN LIVING ROOM Quantity Units Cost Estimate TotalCeilingWalls

Flooring

Windows

Lighting

4 Each

Ceiling Fan1 Each

HALLWAYS Quantity Units Cost Estimate TotalCeiling

Flooring

MASTER BEDROOM Quantity Units Cost Estimate Total

Ceiling

Flooring

Doors1 Each

Egress Window

Closet

Spec Description

Remove existing hdw and install new Kwikset Balboa Satin Nickel Hall/Closet Lever Model #

200BL 15 6AL RCS or approved equal.

Remove existing fixture and install 4 recessed can lights HALO in Housing ( # H272RICAT)

inclusive of HALO Trim, CFL bulb, Energy Star rated or approved equal. Space evenly over dining

area.patch and repair and paint gyp bd ceiling to match existing as a result of fixture removal

and/or installation

Remove existing ceiling light/fan and install Hampton Bay Glendale 52'' light/fan (161646) or

approved equal.

Spec Description

Front door and Rear door-Install 5'x6' conc landing and 4'x5' +/- conc ramp 1:12 , 2500 psi,

Spec Description

Install 3x4' conc ramp 1:12 max slope , 2500 psi conc; Install 1/2 '' rebar dwls drilled into 12'' oc

, 6x6 mesh. ADA compliant scored surface.

Remove existing hdw and install Kwikset Tustin Satin Nickel Entry Lever and Single Cylinder

Deadbolt Combo Pack Featuring SmartKey Model # 991TNL 15 SMT CP or appoved equal .

Install Alum gutter 5''X10' ‘’Amerimax home products’’ or approved equal to prevent the rain

splashing over the ramp at rear door. Downspout & splash must be installed min 5' away from

the edge of foundation .

Dumpster rental and trash disposal

Clean, Sweep, Vacum, mop

City Of Houston

Spec Description

21. All work must comply with applicable Building Codes(s) and Mechanical Code.

22. All ramps, grab bars, showers, tubs, toilets, door peepholes, etc. must be ADA compliant unless existing conditions restricts implementation.

23. All exterior doors shall be keyed alike and owner shall receive 4 sets of keys.24. When a brand product is specified the contractor may substitute a HCHA approved equal. Substitution must be approved in advance i.e. prior to bid due date. Brand(s) specified are to establish a performance base level.

25. All ramps and landings must be ADA compliant. Ramp slope shall not exceed 1:12.

Spec Description

15. All electrical work must meet the National Electrical Code adopted by the city or by the state for counties, and must be completed by a state-licensed electrician.

16. All plumbing work must meet the International Plumbing Code adopted by the city or by the state for counties, and be completed by a state-licensed plumber.

17. If digging is required, the contractor is responsible for locating utilities underground.

18. Contractor is responsible for complying with all applicable permitting requirements.

19. Contractor is responsible for ensuring that work does not encroach on property lines, setbacks, or easements.

20. Contractor is responsible for complying with EPA and/or HUD lead-based paint rules.

9. Items required by local code, construction standard or other requirement must be completed for final payment.

10. Contractor shall remedy any defect due to faulty material or workmanship and pay for all resulting damage to other work which appears within one year from an accepted final inspection. Contractor shall furnish owner

with all manufacturers' and suppliers' written warranties covering items furnished under this contract prior to release of the final payment.

11. New materials shall be matched with existing materials to be consistent with surrounding surfaces.

12. All Change Orders must be approved by TDHCA PRIOR to performing changed work. Any additional costs due to product or material upgrades is solely at the contractor’s expense unless pre-authorized by the Administrator

and TDHCA.

13. Payment requests shall be based on satisfactory completion of contracted work.

14. Contractor is responsible for verifying accurate field dimensions, sizes, quantities, square feet, linear feet, etc. before ordering materials, products, or supplies. Quantities, square feet, linear feet, etc. listed in the bid

package are for the convenience of the contractor. TDHCA and the Administrator neither make nor imply any guarantee for the accuracy of these numbers.

3. Contractor shall move construction debris from the property to a dumpster or legal landfill at least per week, and leave the property in "broom clean" condition. In occupied properties, construction debris shall be removed

from living quarters daily.

4. Installation of all products and materials shall be according to the manufacturer's instructions.

5. "Install" means to purchase, deliver, set up, test and warrant a new component.

6. "Replace" means to remove and dispose of material, purchase new material, deliver, install, test and warrant.

7. "Repair" means to return a building component to like-new condition through replacement of parts, adjustment and recoating of parts.

8. "Reinstall" means to remove, clean, store and install a component.

Humble, Texas Zip: 77338

General Specifications

1. Each specification must be bid separately. Lump sum bids are NOT ACCEPTED.

2. All products and materials shall be new and arrive in unopened packaging.

Dennis Davis

20014 Cottonglade Ln.County: Harris

Harris County Housing Authority

Work Write-Up & Cost Estimate

(upload to the Reservation System)

Harris County Housing Authority Activity #:1001985008

of 260

Lighting

Ceiling Fan

BEDROOM 2 Quantity Units Cost Estimate Total

Ceiling 1 LS

Flooring

Doors1 Each

Egress WindowCloset

Lighting

Ceiling Fan

BEDROOM 3 Quantity Units Cost Estimate Total

Ceiling

Flooring

Doors1 Each

Egress Window

Closet

Lighting

Ceiling Fan

MASTER BATHROOM Quantity Units Cost Estimate Total

Ceiling

Flooring25 Sq.ft

Toilet

Toilet Grab Bar2 Each

Tub/Shower70 sq.ft

Vanity/Sink/Faucet

Mirror/Medicine Cab. 1 Each

GFCI protection

Exhaust Fan

Linen Closet

Shower Grab bars3 Each

Lighting

BATHROOM 2 Quantity Units Cost Estimate Total

Ceiling

WallsFlooring

Doors1 Each

Toilet

Tub/Shower

3 each

Vanity/Sink/Faucet

Mirror/Medicine Cab.

GFCI Protection

Exhaust Fan

Linen Closet

Grab bars 1 Each

Lighting

KITCHEN Quantity Units Cost Estimate Total

Ceiling

Flooring

WindowsLower CabinetsUpper Cabinets

GFCI Protection

Refrigerator

Closet2 EachRemove existing closet door and Replace it with a new Masonite Hollow Core 6-panel Bi-Fold

Closet interior door 32''X80'' Model #: 743802.0 or approved equal.

Install two 30'' Moen secure mount concealed screw grab bar # R8960FD or approved equal rear

of toilet .

Spec Description

Install 24'' in Moen secure mount concealed screw grab bar # R8960FD or approved equal . One

at the shower wall and the others at wall side of shower and in defferent levels.

Spec Description

Remove existing hdw and install a new privacy lever set hdw Kwikset Balboa Satin Nickel

Hall/Closet Lever Model # 300BL 15 6AL RCS or approved equal .

install 31.5 H x 28'' W x 3.1 D St Philips Marsh Wall Mirror or approved equal.

Remove existing exhaust fan and install Nu tone Havey Duty 50 CFM Ceiling Eve (# HD 50NT)

Energy star Qualified complete with 4'' metal duct or approved equal with vent speedi product

4000 Goose Neck vent ( # 37775578) or approved equal. All ductwork shall be mechanically

fastened and sealed with mastic and insulated to R-6 min. Patch and repair gyp bd and roof to

match existing .

Install 24'' in Moen secure mount concealed screw grab bar # R8960FD or approved equal . One

at the shower wall and the others at wall side of shower and in defferent levels.

Remove the existing floor( tiles and carbit) and install a new floor ceramic tiles 20x20 '' Mohawk

Mirador #380 grout or approved equal .

Remove the existing door complete then enlarge opening and install complete 36'' HC door in

the entrance of the bath unit as indicated in the drawings. Install framing, header and blocking

for a new 36'' HC door with casing, trim and install install new Kwikset Balboa Satin Nickel

Hall/Closet Lever Model # 300BL 15 6AL RCS or approved equal privacy lever set hdw . Paint 2

coats to match existing . patch, Repair and paint gyp bd to mutch existing.

Remove the toilet and demo the conc floor, drain, vent and supply a new line for the new toilet's

location as indicated in the drawings. Reinstall the toilet , new PVC drain, vent and copper

supply to serve the toilet.

Install two 30'' Moen secure mount concealed screw grab bar # R8960FD or approved equal rear

of toilet and wall side of toilet.

Remove the existing wall tiles . Install 6X6'' Antique Blanco Ceramic wall tiles or approved equal

using Mapei UltraFlex-1 motar or approved equal.

Remove the existing Vanity and fixtuers complete; replace it with Foremost Naples 31'' .Wx22''

or approved equal to accommodate with new design of the bath unit. Install impression

Collection 4 in. Centerset 2-Handle WaterSense certified Bathroom Faucet in Brushed Nickel

with Brass Pop-Up Model # 10191 Internet # 205157887 or approved equal with new supply and

drain lines complete .

Spec Description

Demo the partition wall and door at toilet over to widen the master bath.patch and repair

celling . texture and paint to match existing. Relocate light switch &elec wiring to accommodate

the new location of the door as in the drawings .

Spec Description

Remove existing hdws and install new Kwikset Balboa Satin Nickel Hall/Closet Lever Model #

Remove existing hdw and install new Kwikset Balboa Satin Nickel Hall/Closet Lever Model #

Spec Description

Repair the spots on ceiling and 2 coats of paint to match existing .

of 260

Dishwasher

1 Each

Exhaust Vent

UTILITY ROOM Quantity Units Cost Estimate Total

Ceiling

Flooring

WindowsWasher Dryer/Dryer Vent

Plumbing Connection

ELECTRICAL SYSTEM Quantity Units Cost Estimate Total

Complete Rewire

Overhead Clearance

Main Panel board

AFCI/GFCI

Branch CircuitsLight switches

Receptacles

PLUMBING SYSTEM Quantity Units Cost Estimate Total

Water Service/Meter

Main Shutoff Valve

Pipe Insulation

Drains, Waste & Vents

Hose Bibs/Anti-siphon

Domestic Water Heater

Septic System

HVAC SYSTEM Quantity Units Cost Estimate Total

Replace System

ACCA Manuals Req'd

Air Handler 1 LSCondensing Coil

Ductwork

Window Units

Minisplits

GRAND TOTAL:

Name of person who prepared this document

Signature of Preparer Date

Inspect and replace the air fan inside the out door unit .

Spec Description

Replace existing dishwasher with Whirlpool 55-Decibel Built-In Dishwasher (Monochromatic

Stainless Steel) (Common: 24-in; Actual: 23.875-in) ENERGY STAR or approved equal.

Spec Description

of 260

posted february 3, 2016---addendum #1 see pages 27-37...

Documents