post – bid addendum #1 to plans and specifications...

04/15/15

POST – BID ADDENDUM #1 TO PLANS AND SPECIFICATIONS FOR New Music Building Ft. Sam Houston Independent School District 04/15/15 NOTE: If you have questions about this project, please contact Edward J. Rodriguez, Senior Project Manager [email protected] 210.223.9588 Wanira Magaloni, Designer [email protected] 210.223.9588 This Post – Bid Addendum is generally separated into sections for convenience; however, all contractors, subcontractors, material suppliers and other involved parties shall be responsible for reading the entire Addendum. Failure to list an item(s) in all affected sections of this Addendum does not relieve any party affected from performing per instructions, provided the information is set forth one time anywhere in the Addendum. This document shall become attached to and part of the Construction Documents for the aforementioned project. BID DATE and TIME: Coordinate with D.L. Bandy Constructors, Inc. DELIVER PROPOSALS TO: D.L. Bandy Constructors, Inc. Attention: David Bandy

P.O. Box 1529 San Marcos TX 78667 512-754-6661 512-754-6662 fax GENERAL ITEMS: Where materials and manufacturers are deleted, clarified or added to the project via this post-

bid addendum, refer to and coordinate with, the applicable specification sections. LIST OF ATTACHMENTS: Architectural Sheets MEP Sheets A121R M11R A201R M301R A211R M302R A401R E111R A501R E211R A611R E501 A631R MEP Narrative A711R A801R A821R

mailto:[email protected]

mailto:[email protected]

SPECIFICATIONS

ITEM SECTION DESCRIPTION 1 08 03 85-Steel Acoustical Door

Assemblies Security Metal Products Model # AW50C-STC50 is an acceptable manufacturer;

2 02 25 00-Allowances Delete “Allowance No. 4”, in the amount of $100,000 from the project

DRAWINGS

ITEM SHEET NUMBER DESCRIPTION 3 A121R • Windows at upper level of building are deleted. 4 A201R • Windows at upper level of building are deleted.

• Metal Building panels are revised as indicated in the “Panel Profile Schedule” Coordinate the requirements of Specification Section

5 A211R • Windows at upper level of building are deleted. • The layout of the acoustical wall panels are revised

6 A401R • The ceramic tile indicated at the wall elevations is revised. • Refer to Room Finish Schedule

7 A501R • The “Window Types” schedule is revised. 8 A611R • The reflected ceiling plan is revised.

• Delete Wood Panel ceiling. • Add 2x2 acoustical panel ceiling system. • Refer to Room Finish Schedule

9 A631R • The ceiling system is revised. • Delete Wood Panel ceiling. • Add 2x2 acoustical panel ceiling system. • Refer to Room Finish Schedule.

10 A711R • B1-First Level Floor Plan is revised to show VCT flooring • A6-Corridor Floor and Wall Pattern AXO is revised to indicate

ceramic tile 11 A801R • The Room Finish Schedule is revised.

• The Material Schedule is revised. 12 A821R • The layout of the acoustical wall panels is revised. 13 MEP • Refer to attached MEP narrative for additional information. 14 MEP • Refer to attached MEP narrative for additional information.

END OF POST – BID ADDENDUM # 1

G1A811

26.19.15

6.8 22.4

CT2

CT4

6' -

0"C

T39'

- 0"

CT2

2' -

0"C

T31'

- 0"

CT4

11' -

0"

CT3

6' -

0"C

T23'

- 0"

CT3

1' -

0"

CT4

2' -

0"C

T32'

- 0"

CT2

2' -

0"C

T31'

- 0"

CT3

5' -

0"C

T23'

- 0"

CT3

1' -

0"

CT4

10' -

0"

CT3

2' -

0"

CT2

2' -

0"C

T31'

- 0"

CT4

6' -

0"C

T39'

- 0"

CT2

2' -

0"C

T31'

- 0"

CT4

11' -

0"

CT3

6' -

0"C

T23'

- 0"

CT3

1' -

0"

CT4

6' -

0"C

T39'

- 0"

CT2

2' -

0"C

T31'

- 0"

CT2

2' - 0" 6' - 0" 2' - 0" 6' - 0" 2' - 0" 6' - 0" 2' - 0" 6' - 0" 2' - 0" 6' - 0" 2' - 0" 6' - 0" 2' - 0" 3' - 5"4' - 9"

P3 P3

10.4

26.1

9.6

105A 115A114113

TYP

8' -

4"

TYP

8"

TYP

8' -

0"

TYP

1' -

4"

TYP

8' -

0"

TYP

8' -

4"

TYP

1' -

0"

TYP

2' -

10"

CLCLCLCL

.60"H x 24"W

.84"H x 36"W

.60"H x 24"W

.48"H x 36"W

.36"H x 24"W .

48"H x 36"W

.36"H x 24"W.

48"H x 36"W

.60 1/16"H x 24"W

.84 1/16"H x 36"W

.60 1/16"H x 24"W

10.18

9.6

9' - 4"8' - 4"

FIN FL

11' - 4"

.24 1/8"H x 72"W

.84"H x 36"W

.84"H x 36"W

9' - 4"8' - 4"

FIN FL

.84"H x 36"W

.24"H x 24"W

10.18

MKBD

3' -

0"4'

- 0"

.60"H x 24"W

.84"H x 36"W

.60"H x 24"W

.48"H x 36"W

.48"H x 36"W

.36"H x 24"W

.36"H x 24"W

.48"H x 36"W

.60"H x 24"W

.84"H x 36"W

.60"H x 24"W

9.6

9' - 4"8' - 4"

FIN FL

11' - 4"

9' - 4"8' - 4"

FIN FL

.84"H x 36"W

.46"H x 24"W

.84"H x 36"W

.46"H x 48"W

.84"H x 36"W

.46"H x 24"W

.70 5/16"H x 36"W

10.18

9.6

P2

9.6

AWP248"H x 36"W

AWP236"H x 24"W

AWP248"H x 36"W

AWP236"H x 24"W

AWP248"H x 36"W

AWP260"H x 24"W

AWP284"H x 36"W

AWP260"H x 24"W

AWP260"H x 24"W

AWP284"H x 36"W

AWP260"H x 24"W

10.18

9' - 4"8' - 4"

FIN FL

11' - 4"

AWP236"H x 24"W

AWP236"H x 24"W

AWP284"H x 36"W

AWP260"H x 24"W

AWP284"H x 36"W

AWP224"H x 72"W

AWP284"H x 36"W

AWP223"H x 24"W

AWP284"H x 36"W

AWP284"H x 36"W

AWP224"H x 72"W

AWP284"H x 36"W

AWP224"H x 24"W

AWP284"H x 36"W

AWP284"H x 36"W

10.18

9.6

9' - 4"8' - 4"

FIN FL

MKBD

3' -

0"4'

- 0"

10' - 4" 3' - 0" 1' - 6" 3' - 0" 4' - 7" 16' - 0" 4' - 7" 3' - 0" 1' - 6" 3' - 0"

AWP248"H x 36"W

AWP236"H x 24"W

AWP248"H x 36"W

AWP236"H x 24"W

AWP248"H x 36"W

AWP260"H x 24"W

AWP284"H x 36"W

AWP260"H x 24"W

AWP260"H x 24"W

AWP284"H x 36"W

AWP260"H x 24"W

9' - 4"8' - 4"

FIN FL

11' - 4"

AWP184"H x 36"W

AWP160"H x 24"W

AWP184"H x 36"W

AWP128"H x 72"W

AWP184"H x 36"W

AWP146"H x 24"W

AWP184"H x 36"W

AWP146"H x 48"W

AWP184"H x 36"W

AWP146"H x 24"W

AWP184"H x 36"W

AWP128"H x 72"W

AWP173 5/16"H x 36"W

AWP160"H x 24"W

AWP184"H x 36"W

9' - 4"8' - 4"

FIN FL

10.18

9.6

P2

4' -

0"4'

- 0"

4' - 0" 6' - 3" 1' - 8 1/2" 3' - 0" 2' - 0" 3' - 0" 2' - 0" 3' - 0" 1' - 7"

4' -

0"5'

- 0"

4' -

0"4'

- 0"

4' - 0" 12' - 0"

8' MKBD1' - 7" 3' - 0" 2' - 0" 3' - 0" 2' - 0" 3' - 0" 1' - 8 1/2"

4' -

0"5'

- 0"

1. REFER TO SHEETS A501 FOR DOOR SCHEDULE.

2. REFER TO SHEET A003 FOR LINTEL SCHEDULES AND DOORAND WINDOW JAMB STUD FRAMING SCHEDULE.

3. ALL DOORS TO BE 1 3/4" THICK (UON)

4. ALL STL FRAMES TO HAVE A 2" FACE DIMENSION UON, W/ 5/8"STOP. 3/4" STOP REQUIRED FOR FIRE RATED FRAMES.

5. STEEL FRAME DEPTHS INDICATED IN THE DETAILS ARENOMINAL. PROVIDE STANDARD WIDTH FRAME WITH THROATOPENING APPROPRIATE TO WALL TYPE.

6. COORDINATE WITH MECH DOCUMENTS FOR DOORUNDERCUTS AND DOOR LOUVERS, IF ANY.

7. ALL LIGHTS IN DOORS TO HAVE SAFETY GLAZING (UON).

8. EXTERIOR DOORS TO HAVE TINTED GLAZING (UON) ANDINTERIOR DOORS TO HAVE CLEAR GLAZING.

9. FIELD VERIFY DIMENSIONS PRIOR TO FABRICATING FRAMES.

10. PROVIDE WD BLKG IN GYP BD WALLS BEHIND DOORSSCHEDULED TO HAVE WALL MOUNTED DOOR STOPS. (REFERHARDWARE SCHEDULE SUBMITTAL).

11. REFER TO A004 FOR TYP WINDOW AND DOOR CONTROLJOINTS IN MASONRY WALLS. REFER TO A004 FOR TYP WINDOWAND DOOR CONTROL JOINTS IN STEEL STUD FRAMED WALLS.

12. FLOOR MATERIAL CHANGES BETWEEN ROOMS TO OCCURUNDER DOOR.

13. PROVIDE TREATED WOOD BLOCKING AT WINDOWSURROUND MEMBERS AS REQUIRED FOR PROPER ATTACHMENTWHERE ALUMINUM WINDOWS ARE TO BE INSTALLED IN EXISTINGMASONRY OPENINGS.

14. FIELD VERIFY DIMENSIONS OF EXISTING FRAMES TO REMAIN.

15. PROVIDE 1: LOUVER BLINDS AT WINDOWS TYPE A7, TYP.

GENERAL DOOR & WINDOW NOTES:

1. REFER TO SHEETS A821 FOR ACOUSTICAL PANEL LAYOUT.

2. ACOUSTICAL PANELS MOUNTED BELOW 8'-0" AFF SHALL BEIMPACT RESISTANT, TYP.

3. ACOUSTICAL PANELS SHALL NOT BE FIELD CUT FORINSTALLATION OF OTHER WALL LOCATED EQUIPMENT,UTILITIES, ETC. NOTIFY ARCHITECT OF CONFLICTING WALLMOUNTED ITEMS.

4. ALL CORRIDOR INSTALLED ACOUSTICAL PANELS SHALL BE2" PANELS, TYP.

5. ABOVE CEILING SOUND ABSORPTION SHALL BE 50% OFCEILING AREA AT CHORAL ROOM.

6. GYP BD PANELS AND DUCTWORK ABOVE CEILING SHALL BEPAINTED BLACK.

GENERAL ACOUSTICAL PANEL NOTES:

ACOUSTICAL PANEL LEGEND

AWP1 - 2" ACOUSTICAL WALL PANELREF SPECS

AWP2 - 4" ACOUSTICAL WALL PANELREF SPECS

AWP3 - HIGH IMPACT ACOUSTICALWALL PANELREF SPECS

N

1

ISSUE:

CHECKED:

SCALE:

© 2014 Stantec

Stantec Project:

SHEET TITLE:

KEY PLAN (NTS)

Final Plans for Bidding and Construction

2 3 4 5 6 7 8 9 10

1 2 3 4 5 6 7 8 9 10

H

G

F

E

D

C

B

A

H

G

F

E

D

C

B

A

1344 SOUTH FLORESSUITE 201

SAN ANTONIO, TEXAS 78204

P 210.223.9588F 210.223.9589

11/07/14

C:\U

sers

\Pub

lic\D

ocum

ents

\Loc

al_R

evit_

File

s\21

4000

210

FSH

Ban

d H

all A

14_v

sier

ra.rv

t4/

16/2

015

12:0

5:19

PM

As indicatedER

FORT SAM HOUSTONINDEPENDENT SCHOOL

DISTRICT

COLE HIGH SCHOOLBAND HALL

SAN ANTONIO, TEXAS

INTERIOR ELEVATIONS

A821R214000210

11/07/2014

3/16" = 1'-0"F1CORR 100 - EAST ELEV.

3/16" = 1'-0"D1CORR 100 - WEST ELEV.

3/16" = 1'-0"A1CHORAL HALL - NORTH ELEV.

3/16" = 1'-0"A7CHORAL HALL - EAST ELEV.

3/16" = 1'-0"A5CHORAL HALL - SOUTH ELEV.

3/16" = 1'-0"A3CHORAL HALL - WEST ELEV.

3/16" = 1'-0"C1BAND HALL - NORTH ELEV.

3/16" = 1'-0"C3BAND HALL - EAST ELEV.

3/16" = 1'-0"C7BAND HALL - SOUTH ELEV.

3/16" = 1'-0"D7BAND HALL - WEST ELEV.

KEYNOTESKEY DESCRIPTION

6.8 WOOD VENEER MILLWORK9.6 SCHEDULED BASE9.15 PORCELAIN WALL TILE10.4 FIRE EXTINGUISHER CABINET10.18 ACOUSTICAL WALL PANEL22.4 ELECTRIC WATER COOLER. SEE PLUMBING DWGS26.1 LIGHT FIXTURE AS SCHEDULED. SEE ELEC. DWGS

3/16" = 1'-0"H7ENSEMBLE RM - SOUTH ELEVATION

3/16" = 1'-0"H9ENSEMBLE RM - WEST ELEVATION

3/16" = 1'-0"F7ENSEMBLE RM - NORTH ELEVATION

3/16" = 1'-0"F9ENSEMBLE RM - EAST ELEVATION

1 12/10/2014 ADD #1

FSH BAND HALL MATERIAL SCHEDULE

EXTE

RIO

R

SEALED CONCRETESC1

INTE

RIO

R

MIS

CEL

LAN

EOU

S

TP

MB

TB

TOILET PARTITIONS

MARKERBOARD

TACKBOARD/TACKWALL

PL2

PL1

PLASTIC LAMINATE

PLASTIC LAMINATE

FLO

OR

S

WD1

RB1

WOOD

RUBBER BASE

VCT1 VINYL COMPOSITE TILE

WAL

LS

GROUTGT2

CT1 CERAMIC TILE

AWP1

AWP2

ACOUSTICAL WALL PANEL

ACOUSTICAL WALL PANEL

P2

P3

MRK

PAINT

PAINT

PAINT

MATERIAL

-

CLARIDGE/GENON

SANTANA

CLARIDGE

SELECTED BY ARCH

-

SELECTED BY ARCH

FORMICA

FORMICA

5877-58 SEED WEFT , FINISH: MATTE

3697-58 BELUGA , FINISH: MATTE

ROPPE

BLOCK MOTTLE MAKORE #NP01164

4" COVE, 114 LUNAR DUST

MANNINGTON

2"

4"

MANUFACTURER

BENJAMIN MOORE

BENJAMIN MOORE

BENJAMIN MOORE

SANDY HOOK GRAY HC-108

SWEET DAPHNE 529

CLOUD WHITE 967

STYLE / COLOR REMARKS

NATURE'S PALETTE

GROUTGT1 LATICRETE

BASE

MIL

LWO

RK

CEI

LIN

G APC1 ACOUSTICAL PANEL CEILING ARMSTRONG ULTIMA NRC .60 , 2424" SQUARE LAY-IN

SL1 SOUNDLOK 6'-8" x 9'-1", GENERAL COLOR: OYSTER, DOOR& FLOOR RAIL: CHARCOAL GREY

SOUND-ISOLATION ROOM WENGER

POLISHED CONCRETEPC1 FIELD

POLISHED CONCRETEPC2

PB1 PORCELAIN TILE BASE DALTILE KEYSTONES BULLNOSE 2"X4", ARCHITECTURAL GRAY D109

VCT2

ESSENTIALS - MINERAL GRAY 175

VCT3

FOR HORIZONTAL APPLICATIONS

FOR VERTICAL APPLICATIONS

CT6 PORCELAIN MOSAIC TILE DALTILE KEYSTONES 2"X4", ARCHITECTURAL GRAY D109 ([email protected])

P1

POLISHED CONCRETEPC2

BK1 BRICK ACME FIELD COLOR

BK2 BRICK ACME BLACK ACCENT

MP1 METAL PANEL MBC1 SHADOWRIB, SMOOTH / SIGNATURE 300 METALIC

MP2 METAL PANEL MBCI FW-120, SMOOTH / GREEN, NO BEADS

MP3 ALUM PERFORATED PANEL CENTRIA SUNSTORM - 3/4" ECONOLAP

44 BRIGHT WHITE (AT CT1)

AWP3 HIGH IMPACT WALL PANEL HIGH IMPACT

APF2

APF3

ACOUSTIC PANEL FABRICS

ACOUSTIC PANEL FABRICS

ACOUSTIC PANEL FABRICS CINEMA DESIGN GROUP

CINEMA DESIGN GROUP

CINEMA DESIGN GROUP

SELECTED BY ARCHITECT

SELECTED BY ARCHITECT

SELECTED BY ARCHITECTAPF1

WS

DALTILE WALL TILE 4"X4" WHITE K101, SEMI-GLOSS

WOOD STAIN SHERWIN WILLIAMS SELECTED BY ARCH

GYPSUM BOARD CEILING -GWB1 -

APC2 ACOUSTICAL PANEL CEILING ARMSTRONG OPTIMA NRC .90 ., 2424" SQUARE LAY-IN

CT2 CERAMIC TILE DALTILE PARKWAY 12"X24", CREAM PK95 MATTE FINISH

CT3 CERAMIC TILE DALTILE

CT4 CERAMIC TILE DALTILE

CT5 CERAMIC TILE DALTILE WALL TILE 3"X6" MATTE ARCHITECTURAL GRAY 0709

PARKWAY 12"X24", CREAM PK95 GLOSS FINISH

PARKWAY 12"X24", GRAY PK98 MATTE FINISH

LATICRETE 90 LIGHT PEWTER

VINYL COMPOSITE TILE MANNINGTON ESSENTIALS - PEWTER 112

VINYL COMPOSITE TILE MANNINGTON ESSENTIALS - MACAW 145

NATURAL CONCRETE COLOR

FOREST GREEN

BLACK

ACCENT

ACCENT

1. MODEL NUMBERS/MFR'S ARE LISTED ON CASEWORK ELEVATIONS SO THAT A MINIMUM DESIGN BASIS MAY BEESTABLISHED. THE DIMENSIONS SHOWN (WXHXD) MAY DIFFER FROM THE SELECTED MFR'S STANDARD DIMENSIONSFOR THE LISTED MODEL NUMBERS.

2. PROVIDE SIDE, TOP, AND BOTTOM FILLER PIECES AS REQ'D TO COMPLETE CASEWORK INDICATED ON PLANS.3. ALL FLOOR MOUNTED FIXTURES ARE TO HAVE THE SAME FINISH FACE MATERIAL AS THE ROOM IN WHICH THEY ARE

LOCATED.4. BLIND CABINETS, AT CORNERS, ARE TO BE LEFT OR RIGHT HAND AS REQ'D PER PLAN.5. ALL CABINETS TO HAVE PLASTIC LAMINATE THROUGHOUT, INCLUDING ALL EXPOSED SURFACES INSIDE AND OUT.6. PROVIDE PLASTIC LAMINATE FINISHED END PANELS AT EXPOSED CABINET ENDS INCLUDING KNEESPACES (TYP).7. FIELD VERIFY DIMENSIONS PRIOR TO FABRICATION AND INSTALLATION OF ANY FIXTURES.8. BOOKCASES AND SHELVES TO HAVE FRONT FACING SURFACE OF BACK PANEL TO WATCH FINISH OF REMAINDER OF

BOOKCASE.9. COUNTERTOPS TO HAVE PLASTIC LAMINATE SURFACE W/ 4" HIGH BACKSPLASH (TERRILL, TYPE No. 2) TYP, UON.10. PROVIDE KEYED LOCKS AT CABINET DOORS AND DRAWERS, WHERE INDICATED.11. KNEESPACE UNITS NOT RECEIVING SINKS SHALL RECEIVE GROMMETS CENTERED ON THE UNIT, 3" FROM THE BACK

EDGE OF THE KNEESPACE UNIT (UON).12. SHELVES SHALL BE ADJUSTABLE (UON). SHELVES OVER 36" IN LENGTH SHALL BE 1" THICK.13. PROVIDE 7/8" WORK TOPS WITH PLASTIC LAMINATE FINISH AT CASEWORK SHELVING UNITS UNDER 48".14. PROVIDE 4' -0" TALL TACKBOARDS, AND MARKERBOARDS (UON). BOARDS SHALL BE IN THE SAME FRAME WHEN

ADJACENT.15. MKBDS, AND TKBDS TO HAVE CONT TACKSTRIPS AND PEN TROUGHS (UON). TACKSTRIPS TO HAVE MAP HOOKS (UON).16. PROJECTION SCREENS: REF TECHNOLOGY DOC.17. PROVIDE BUILT-IN RECESSED COMBINATION LOCKS AT LOCKERS (UON).18. PROVIDE HORIZONTAL LOUVER BLINDS AT EXTERIOR WINDOWS, EXCEPT WINDOWS SHARING A FRAME WITH A DOOR

(UON).

NOTE: COORDINATE ALL ELECTRICAL ITEMS W/ CASEWORK,DISPLAY BOARDS, MIRRORS & ACOUSTICAL MATERIAL ASINDICATED ON THE PLANS, CASEWORK ELEVATIONS &INTERIOR ELEVATIONS (TYP).

1. FIRE EXTINGUISHERS (MEASURED FLOOR TO T.O. CABINET)

A. ALL GRADES AND ADULTS =56"

2. CHBD, MKBD & TKBD (MEASURED FLR. TO BOTT. OF BOARD)

A. GRADES 7-12 & ADULTS =36"

3. DOOR HARDWARE (MEASURED FLR. TO CENTER OF HARDWARE)

A. GRADES 7-12 & ADULTS

1. PUSH PLATES =45"

2. PULL HANDLES =42"

3. KNOBS =40 5/16" TO CL OF STRIKE

4. PANIC EXIT =40 5/16" TO CL OF STRIKE

4. THERMOSTATS & CCMS SENSORS (VERIFY HT. W/ ARCHITECT)

A. ALL OCCUPIED SPACES =48" MAX. TO TOP OF BOX

5. CONVENIENCE RECEPTACLES

A. GENERAL AREAS =15" MIN. TO BOTT. OF BOX

B. SPECIAL AREAS AS REQ'D, VERIFY W/ ARCH.

6. CLOCK OUTLETS

A. GENERAL AREAS =96"


7. LIGHT SWITCHES

A. ALL AREAS =48" MAX. TO T.O. BOX

8. FIRE ALARM PULL STATIONS

A. ALL AREAS =44" TO BOT. OF BACKBOX

9. FIRE ALARM STROBES/HORN STROBES

A. ALL AREAS =80" TO BOT OF BACKBOXOR 6" BELOW CEILING,WHICHEVER IS LOWER

10. SMOKE AND/OR HEAT DETECTORS

A. GENERAL AREAS =CEILING HEIGHT


11. INTERCOM SPEAKERS

A. GENERAL AREAS =96" OR FLUSH W/CLG.


12. TELEPHONE OUTLETS

A. ALL AREAS =15" MIN. TO BOTT. OF BOX

13. SOUND SYSTEM CALL SWITCHES

A. ALL AREAS =48" MAX. TO TOP OF BOX

13. DATA CABLE OUTLETS

A. ALL AREAS =15" MIN. TO BOTT. OF BOX

14. PROJECTION SCREENS

A. ALL AREAS COORD W/ARCHITECT

15. COUNTERTOPS (BASE CABINETS FLOOR TO C. TOP)

A. GRADES 7-12 & ADULTS =34"

16. SHELF & ROD (MEASURED FLR TO T.O. SHELF)

A. ALL AREAS =72" U.O.N.

17. ROBE HOOKS

A. ADULT =72" A.F.F.

B. ACCESSIBLE =48" A.F.F.

XX1

EXTERIOR

INTERIOR

ALUMINUM STOREFRONT, ALUMINUM WINDOWS

COPING, AND FLASHING NOTED ON THE DRAWINGS.

ALL UNDESIGNATED PRE-FINISHED METAL

PRE-FINISHED LOUVERS

GUTTERS, DOWNSPOUTS, BRACKETS & D.S. BOOTS

ALUMINUM HANDRAILS.

HOLLOW METAL DOORS, FRAMES AND STEEL HANDRAILS.

ALL EXPOSED COUNTER FLASHING, PIPE SUPPORTS AND OTHER MISC. FLASHING (U.O.N.).

ALL METAL BUILDING SIGNAGE.

CLEAR ANNOD. -

PM -

PM -

PM -

PM -

CLEAR ANNOD. -

P2 -

MATCH ADJ. WALL -

PM -

1. ALL EXTERIOR STEEL LINTELS SHALL BE PAINTED TO MATCH ADJACENT BRICK.

2. ALL ALUM. WINDOWS & DOOR FRAMES SHALL BE CLEAR ANODIZED; EXTERIOR GLAZING TO BE ACCORDINGTO MANUFACTURER PPG "AZURIA" INSULATION GLASS, TYP.

3. ALL EXTERIOR METAL SHALL BE FINISHED AS FOLLOWS:

1. MANUFACTURERS NAMES AND IDENTIFICATION NUMBERS ARE LISTED AS A MEANS OF ESTABLISHING A STANDARDOF TYPE, FUNCTION, COLOR, AND QUALITY. REFER TO PROJECT MANUAL FOR ADDITIONAL MANUFACTURERS &PROCEDURES.

2. THE CONTRACTOR SHALL SUBMIT TO THE ARCHITECT A SAMPLE OF ALL FINISH MATERIALS FOR APPROVALBEFORE MATERIALS ARE APPLIED ON THE JOB.

3. VERIFY ALL GRAPHICS WITH THE ARCHITECT BEFORE PAINTING. GRAPHICS MAY NEED TO BE ADJUSTEDAFTER ENLARGING TO REFLECT THE SAME COMPOSITION AS ON THE DRAWINGS.

4. IF REQUESTED THE ARCHITECT WILL PROVIDE 8 1/2" X 11" CLEAR ACETATE OR MYLAR OF DETAILEDMURAL GRAPHICS FOR PROJECTION ON WALL.

5. TERMINATE ALL ACCENT PAINTS & VINYL WALL COVERING ON INSIDE CORNERS ONLY UNLESS OTHERWISE INDICATED.

6. PAINT ALL INTERIOR & EXTERIOR EXPOSED PIPING. VERIFY COLOR W/ ARCHITECT.

7. PAINT ANY VENTS, GRILLES, PIPING, FEC, ETC... SAME COLOR AS ADJACENT WALL.

COLORS WILL BE MARKED AS SHOWN. NOTE ALL COLORS MAY NOTBE MARKED ON PLANS. MATERIALS NOT NOTED WILL BE COVEREDUNDER GENERAL NOTES OR WILL BE PICKED ON THE JOB BY THE ARCHITECT.

1. UNDESIGNATED PAINTED GYPSUM BOARD WALLS TO BE MARK "P1".

2. ALL INTERIOR HOLLOW METAL DOOR AND WINDOW FRAMES SHALL BE PAINTED TO MATCH MARK "P2"(U.O.N.). ALL VISION PANEL FRAMES IN INTERIOR DOORS TO MATCH MARK "P2".

3. ALL INTERIOR HOLLOW METAL DOORS SHALL BE PAINTED TO MATCH MARK "P2".

4. ALL INTERIOR WOOD DOORS & UNASSIGNED WOOD TRIM PIECES SHALL BE MARK "WS".

5. METAL HANDRAILS (INTERIOR) SHALL BE PAINTED P1.

6. ALL BOY'S AND GIRL'S TOILET PARTITIONS SHALL BE AS SPECIFIED.

7. ALL BASE CABINETS, WALL CABINETS, AND MISC. CASE WORK SHALL BE MARK "PL1".

8. ALL COUNTERTOPS SHALL BE MARK "PL2", (U.O.N.).

9. ALL METAL LOCKERS SHALL BE FINISHED TO MATCH MARK "P2".

10. ALL EXPOSED STRUCTURAL STEEL INCLUDING ROOF DECK, JOISTS, GIRDERS, BEAMS AND ANY MISC. STEELSHALL BE PAINTED; COORD.W/ ARCH. DUCTS, DIFFUSERS AND AIR HANDLING UNITS SHALL BE GALVANIZED METAL.

11. PATTERNS AND COLORS FOR AREAS SCHEDULED TO RECEIVE MCT SHALL BE AS REPRESENTED ONSHEETS A711. UNDESIGNATED MCT TO BE MARK "MCT1".

12. PATTERNS FOR AREAS SCHEDULED TO RECEIVE POLISHED CONCRETE SHALL BE AS REPRESENTED ON SHEETS A711.

13. LOW PROFILE TRANSITION STRIPS TO BE PLACED AT ANY FLOORING MATERIAL CHANGE.

14.. METAL LOW PROFILE TRANSITION STRIPS TO BE PLACED AT ANY FLOORING MATERIAL CHANGE ADJACENT TO CT.

15. CERAMIC WALL/FLOOR TILE GROUT SHALL BE GT1.

16. PORCELAIN PAVER TILE GROUT SHALL BE GT2.

BRAIL TO MATCH COPYWOMEN

8"

1/2" 7" 1/2"

1/16" WIDE X 1/16" REVEAL

INTERNATIONAL SYMBOLFOR MEN/WOMEN

1/2" R.(TYP)

2"3/

4"

8"

NOTES:

1. ALL COPY TO BE HELVETICA BOLD CONDENSED.2. ALL COPY TO BE RAISED 1/32" MIN.3. COPY STROKE WIDTH TO BE 1/4" WIDE MIN.4. SIZE OF COPY MAY BE ADJUSTED; HOWEVER LETTERS MAY NOT BE LESS THAN 1" HIGH.5. SIGN FACE & BACK SHALL BE AS SPECIFIED.

60"A

.F.F

.

BRAIL TO MATCH COPY101

VERIFY ROOM NAME &NUMBER TYP.

1/2" R.(TYP)

1"3/

4"

8"

NOTES:

1. ALL COPY TO BE HELVETICA BOLD CONDENSED.2. ALL COPY TO BE RAISED 1/32" MIN.3. COPY STROKE WIDTH TO BE 1/4" WIDE MIN.4. SIZE OF COPY MAY BE ADJUSTED; HOWEVER LETTERS MAY NOT BE LESS THAN 1" HIGH.5. SIGN FACE & BACK SHALL BE AS SPECIFIED.

60"A

.F.F

.

1/2" 7" 1/2"

A101

8"

Kitchen

5/8"5/

8" 5/8"3/

4"

Supervisor

ARCHITECTURAL ROOMNUMBERCOLOR TO MATCHBACKGROUND

PROVIDE TWOSLOTS

BRAIL TO MATCH COPY

CONFIRM CLIENTSTANDARD FOR ACRYLICSLOT HEIGHT AND TOTALNUMBER OF SLOTS

Fort Sam Houston Cole HS Band HallFort Sam Houston Independent School District

Board of TrusteesDeborah E. Seabron

Dr. Eustace Lewis

Colonel Randall Anderson

Jeanne Warren

Jane Crow

Dr. Gail Siller

President

Vice President

Secretary

Member

Member

Superintendent

Contractor name

HelveticaNeue LT 45LTRegular 28PT



Line Stroke1PT

Line Stroke1PT

HelveticaNeue LT65MED 50PT



7" 1'-1

"

8" 1'-2

"

7"

8"

1'-1"

1'-2"

**VERIFY ALL TEXT WITH OWNER AND ARCHITECT PRIOR TO FABRICATION**

ARCHITECTURE FIRMLOGO

N

1

ISSUE:

CHECKED:

SCALE:

© 2014 Stantec

Stantec Project:

SHEET TITLE:

KEY PLAN (NTS)


2 3 4 5 6 7 8 9 10

1 2 3 4 5 6 7 8 9 10

H

G

F

E

D

C

B

A

H

G

F

E

D

C

B

A



P 210.223.9588F 210.223.9589

11/07/14

C:\U

sers

\Pub

lic\D

ocum

ents

\Loc

al_R

evit_

File

s\21

4000

210

FSH

Ban

d H

all A

14_v

sier

ra.rv

t4/

16/2

015

12:0

4:40

PM

As indicatedChecker


DISTRICT


SAN ANTONIO, TEXAS

ROOM FINISH AND COLORSCHEDULE

A801R214000210

11/07/2014

FSH BAND HALL ROOM FINISH SCHEDULE

WT ROOM NAME FLOOR BASEWALLS CEILING

REMARKSNORTH EAST SOUTH WEST MATERIAL FINISH

GROUND LEVEL100 CORRIDOR PC RB1 P1 P3 / CT P1 P1 - EXP101 ELEC SC RB1 P1 P1 P1 P1 - EXP102 CUST SC RB1 P1 P1 P1 P1 - EXP103 MEN TLT CT CT P1/CT P2 P1/CT P1/CT GWB1104 WOMEN TLT CT CT P1/CT P2 P1/CT P1/CT GWB1105 BAND HALL VCT RB1 P1 P1 P1 P2 APC2106 OFFICE VCT RB1 P1 P1 P1 P1 APC1108 B PRACTICE VCT SL1 SL1 SL1 SL1 SL1 SL1109 B PRACTICE VCT SL1 SL1 SL1 SL1 SL1 SL1110 LIBRARY/STORAGE VCT RB1 P1 P1 P1 P1 APC1111 UNIFORM STOR VCT RB1 P1 P1 P1 P1 APC1112 ENSEMBLE VCT RB1 P1 P1 P1 P1 APC2113 STAFF TLT CT CT P1 / CT P1 / CT P1 / CT P1 GWB1114 IDF SC RB1 P1 P1 P1 P1 - EXP115 CHORAL HALL VCT RB1 P1 P1 P1 P2 APC2116 HALL VCT RB1 P1 P1 P1 P1 APC1117 C PRACTICE VCT SL1 SL1 SL1 SL1 SL1 SL1118 C PRACTICE VCT SL1 SL1 SL1 SL1 SL1 SL1119 LIBRARY VCT RB1 P1 P1 P1 P1 APC1120 OFFICE VCT RB1 P1 P1 P1 P1 APC1121 STORAGE VCT RB1 P1 P1 P1 P1 APC1123 RISER SC - P1 P1 P1 P1 - EXPMEZZANINE200 MECH PLATFORM CONC - P1 P1 P1 P1 - EXP201 MECH PLATFORM CONC - P1 P1 P1 P1 - EXP

MOUNTING HEIGHT LEGEND

FURNISHING AND EQUIP GENERAL NOTESGENERAL COLOR SCHEDULE NOTES

TYPICAL HANDICAP SIGNTYPICAL INTERIOR SIGN

2 04/07/2015 V.E. ITEMS

16' M

KBD

16' M

KBD

16' MKBD

J

J

J

2

22

A821R

A1

A7

A5

A3

A821RD1 F1

A821R

C7

C1

D7 C3

CORRIDOR100

ELEC101

CUST102

RISER123

WOMEN TLT104

IDF114

STAFF TLT113

ENSEMBLE112

UNIFORM STOR111

BAND HALL105

OFFICE106LIBRARY/STORAGE

110

B PRACTICE108

B PRACTICE109

CHORAL HALL115

STORAGE121

OFFICE120

LIBRARY119

C PRACTICE118

C PRACTICE117

HALL116

A811

G8

G4

MS1

10.17 10.17

10.1710.17

10.4

12.3

C6A711R

PROVIDE MUSICALNOTATION TO HALFOF MARKER BOARD.

A501R6

VCT3

VCT2

VCT3

VCT2

VCT3

VCT2

VCT1

VCT1

VCT1

A821R

H7

H9

F7

F9

A501R

9

PC1

A201R A9

VCT2

VCT3

VCT3

VCT1

VCT1 VCT1

VCT1

38T

1T

3' - 0"

VCT1 VCT1

CASEWORK KEY

MODEL#WIDTHxHEIGHTxDEPTH

REMARKSADDITIONAL REMARKS

MODEL#WIDTHxHEIGHTxDEPTH

REMARKSADDITIONAL REMARKS

NOTE: ALL CASEWORK MODEL NUMBERS DESIGNATED ONSHEETS AI 1.01-1.04 AND AI 2.01 ARE FROM "TERRILLMANUFACTURING CO." GENERAL CATALOG (UON). REFER TOSPECIFICATIONS FOR ADDITIONAL ACCEPTANCEMANUFACTURERS. - REF F&E GENERAL NOTE #1 SHT AF 6.01

NOTE: REF SHT AF 6.01 FOR COLOR SCHED, NOTES, ANDFINISHES, TYP.

CONT COUNTERAND BACK SPLASH

F G H J

5

6

10

11

12

14

15

16

5' -

2 3/

4"2'

- 0"

6' -

0"2'

- 0"

6' -

0"2'

- 0"

6' -

0"2'

- 0"

6' -

0"2'

- 0"

6' -

0"2'

- 3

3/4"

5' -

8 1/

4"2'

- 0"

5' -

11 1

/4"

ALIGN

ALIGN

PC1

PC2

PC1

PC2

PC1

PC2

PC1

PC2

PC1

PC2

PC1

PC2

PC1

PC2

PC1

PC2

PC1

NOTE:ALIGN FLOOR PATTERNWITH WALL TILE PATTERN

A1A811

CT43' - 0"

CT6

CT43' - 0"

CT6

7

8

9

13

PC3

PC3

PC3

PC3

PC3

PC3

PC3

PC3

(14

LOC

KER

S)R

EF. D

9/A8

11(1

4 LO

CKE

RS)

REF

. D9/

A811

12x1

8x72

12x1

8x72

6"

STAINED POLISHEDCONCRETE

POLISHED CONCRETE

TILE PATTERN WRAPSAROUND OUT SIDE CORNERS

DISPLAY CASE (SHEET A811)

CERAMIC TILE ACCENT -MATTE (CT4)

CERAMIC TILE ACCENT -SEMIGLOSS (CT3)

CERAMIC TILE FIELD -MATTE (CT2)

FINISH KEY

PC1

PC2

PC3

CT6

CT4

N

1

ISSUE:

CHECKED:

SCALE:

© 2014 Stantec

Stantec Project:

SHEET TITLE:

KEY PLAN (NTS)


2 3 4 5 6 7 8 9 10

1 2 3 4 5 6 7 8 9 10

H

G

F

E

D

C

B

A

H

G

F

E

D

C

B

A



P 210.223.9588F 210.223.9589

11/07/14

C:\U

sers

\Pub

lic\D

ocum

ents

\Loc

al_R

evit_

File

s\21

4000

210

FSH

Ban

d H

all A

14_v

sier

ra.rv

t4/

16/2

015

12:0

4:27

PM

As indicatedChecker


DISTRICT


SAN ANTONIO, TEXAS

FIRST LEVELCASEWORK/MILLWORK,FLOOR PATTERN,EQUIPMENT PLAN

A711R214000210

11/07/2014

1/8" = 1'-0"B1FIRST LEVEL FLOOR PLAN


10.4 FIRE EXTINGUISHER CABINET10.17 SOUND-ISOLATION ROOM12.3 WALK-OFF MAT

1/4" = 1'-0"C6ENLARGED FLOOR PATTERN

A6CORRIDOR FLOOR AND WALL PATTERN AXO

2 04/07/2015 V.E. ITEMS

SUSPENDED ACOUSTICALPANEL CEILING ASSCHEDULED (GYP BDWHERE NOTED)

CONTINUOUS BENT PLATEBETWEEN JOISTS

STUD FRAMING AT16" O.C.

SUSPENDED APC ASSCHEDULED

5/8" GYP BD (PT)

CORNER BEAD

SHEET METAL CLIPANGLES - TYP ATCORNERS

CONT RUNNER TRACKANCHOR TO B.O. STRUCT

STUD BRACE AT 4'-0" OC(ANCHOR TO STRUCTURE)

8" M

IN2"

1' - 2"

STUD FRAMINGAT 16" OC

5/8" GYP BD (PT)

CORNER BEAD(TYP)

SHEET METALCLIP ANGLES -TYP AT CORNERS

GYP BD CEILINGAS SCHEDULED

2"8"

STUD FRAME DIAGONALBRACE AT 4'-0" OC MAX.(ANCHOR TO STRUCTURE)

CONT. RUNNER TRACKANCHOR TO B.O. STRUCT

F7 Sim

A301

F4 Sim

A301

119' - 0"

F7 Sim

A301

F4 Sim

A301

119' - 0"

SUSPENDED APCAS SCHEDULED

6" STUD FRAMINGAT 16" OC

5/8" GYP BD (PT)

CORNER BEAD

REF

RC

P

SOUND-ISOLATIONROOM ASSEMBLY

CONTINUOUS BENTPLATE BETWEENJOISTS

CONT RUNNER TRACKANCHOR TO B.O. STRUCT

STUD BRACE AT 4'-0" OC(ANCHOR TO STRUCTURE)

2' -

0"

SOUND-ISOLATIONROOM FILL PANEL

STUD FRAMINGAT 16" OC

5/8" GYP BD (PT)

CORNER BEAD(TYP)

SHEET METALCLIP ANGLES -TYP AT CORNERS

STUD FRAME DIAGONALBRACE AT 4'-0" OC MAX.(ANCHOR TO STRUCTURE)

CONT. RUNNER TRACKANCHOR TO B.O. STRUCT

REF PLAN

N

1

ISSUE:

CHECKED:

SCALE:

© 2014 Stantec

Stantec Project:

SHEET TITLE:

KEY PLAN (NTS)


2 3 4 5 6 7 8 9 10

1 2 3 4 5 6 7 8 9 10

H

G

F

E

D

C

B

A

H

G

F

E

D

C

B

A



P 210.223.9588F 210.223.9589

11/07/14

C:\U

sers

\Pub

lic\D

ocum

ents

\Loc

al_R

evit_

File

s\21

4000

210

FSH

Ban

d H

all A

14_v

sier

ra.rv

t4/

16/2

015

12:0

3:49

PM

As indicatedER


DISTRICT


SAN ANTONIO, TEXAS

CEILING DETAILS

A631R214000210

11/07/2014

1" = 1'-0"F1CEILING DETAIL


1/2" = 1'-0"E1CEILING - LAYOUT 1 SECTION

1/2" = 1'-0"B1CEILING - LAYOUT 2 SECTION


DUCT, REF MECH DOCS

DUCT, REF MECH DOCS

2 04/07/2015 V.E. ITEMS


D3A401R

LIBRARY/STORAGE110 OFFICE

106

B PRACTICE108

B PRACTICE109

BAND HALL105

ENSEMBLE112

UNIFORM STOR111

IDF114

STAFF TLT113

CHORAL HALL115

CORRIDOR100

WOMEN TLT104

RISER123

CUST102

ELEC101

C PRACTICE117

C PRACTICE118

HALL116

LIBRARY119

OFFICE120

STORAGE121

9' - 6"APC1

E1A631R

B1A631R

9' - 6"GWB1

9' - 6"APC1 9' - 6"

APC1

11' - 0"APC1

8' - 6"SL1

9' - 6"APC1

8' - 6"SL1

9' - 6"APC1

60' -

11

1/2"

8' - 6"SL1

8' - 6"SL1

26.2

EQEQ

EQEQ

8' - 6 1/8"

E1Sim

A631R

B1Sim

A631R

A1A303

A1A301

F3A631R

F3A631R

EQEQ

A1A211R

A1A211R

10' - 0"APC2

12' - 0"GWB1

10' - 6"GWB1

10' - 6"GWB1

12' - 0"GWB1

8' - 0"GWB1

8' - 0"GWB1 12' - 0"

GWB1

8' -

0"G

WB1

F5A631R

F5A631R

F5A631R

F1A631R

5/8" GYP BOARD PANELS(PAINTED BLACK) SET ABOVE WOOD GRILLECEILING, REF SECTIONS. GYP BOARD PANELSSHOWN HERE IN RCP FOR QUANTITY ANDDISTRIBUTED LOCATION PURPOSES ONLY, TYP.

F7A631R

F7A631R

MEN TLT103

9' - 0"APC1

19' - 0"APC2

19' - 0"APC2

RCP GENERAL NOTES

REFER TO FLOOR PLANS & INTERIOR ELEVATIONS FOR WALLMOUNTED FIXTURES & DEVICES, ETC.

REFER TO MECHANICAL, ELECTRICAL & TECHNOLOGYDRAWINGS FOR QUANTITY & TYPE OF CEILING MOUNTEDFIXTURES & DEVICES, ETC.

ALL CEILING MOUNTED FIXTURES, DEVICES, ETC ARE TO BECENTERED WITHIN THE CEILING TILE UNLESS NOTEDOTHERWISE.

UNDESIGNATED PAINTED GYPSUM BOARD SOFFITS & CEILINGSUNLESS NOTED OTHERWISE TO BE PAINTED 'PT-X'.

EXACT LOCATIONS FOR PROJECTOR MOUNTS & CEILINGMOUNTED PROJECTION SCREENS ARE TO BE FIELD VERIFIEDTO ACHIEVE THE OPTIMUM PERFORMANCE. COORDINATE WITHTECHNOLOGY TRADE CONTRACTOR.

FIELD VERIFY ALL BULKHEAD DIMENSIONS PRIOR TOCONSTRUCTION.

PROVIDE CONTROL JOINTS AT 30' - 0" OC MAXIMUM AT ALLGYPSUM BOARD BULKHEADS

1.

2.

3.

4.

5.

6.

7.

CEILING LEGEND

SUSPENDED GYP BD CEILINGSYSTEM OR GYP BD BULKHEADREF DWGS.

2'-0" x 2'-0" ACOUSTIC PANELCEILING SYSTEM. PER FINISHSCHEDULE

10'-8"

SUSPENDED WOODGRILLE CEILING SYSTEM .PER FINISH SCHEDULE

RECESSED 2' X 4' LIGHTFIXTURE REF MEP DOC

ELEVATION HEIGHT SYMBOLINDICATES HEIGHT OF CEILINGABOVE FINISH FLOOR ANDCEILING TYPE. SEE FINISHSCHEDULE FOR MOREINFORMATION.

RECESSED LIGHTING FIXTUREREF MEP DOC

PENDANT MTD LIGHT FIXTUREREF MEP DOC

NOTE: EXIT LIGHTING FIXTURES- REF MEP DOCS

SUPPLY AND RETURN AIRGRILLS. REF MEP DOCS

PROJECTOR SCREEN (NIC)REF. TECHNOLOGY, TYP.

EXPOSED STRUCTUREOR OPEN TO BELOW

APC1

CEILING BY PRACTICEROOM MANUF

N

1

ISSUE:

CHECKED:

SCALE:

© 2014 Stantec

Stantec Project:

SHEET TITLE:

KEY PLAN (NTS)


2 3 4 5 6 7 8 9 10

1 2 3 4 5 6 7 8 9 10

H

G

F

E

D

C

B

A

H

G

F

E

D

C

B

A



P 210.223.9588F 210.223.9589

11/07/14

C:\U

sers

\Pub

lic\D

ocum

ents

\Loc

al_R

evit_

File

s\21

4000

210

FSH

Ban

d H

all A

14_v

sier

ra.rv

t4/

16/2

015

12:0

3:42

PM

As indicatedER


DISTRICT


SAN ANTONIO, TEXAS

FIRST LEVEL CEILINGPLAN

A611R214000210

11/07/2014

1/8" = 1'-0"A5FIRST FLOOR RCP


26.2 12' CEILING MOUNTED EXTERIOR FAN. SEE ELEC. DWGS

2 04/07/2015 V.E. ITEMS

FULL GLASSINTERMEDIATE RAIL

FGIRF NL

NARROW LIGHTFLUSH HALF LIGHTWOOD DOOR

HL

*NOTE: AT DOORS MARKED AS ACOUSTICAL DOORS,PROVIDE SOUND SEALS FOR AN EQUIVALENT STC 50 DOOR

FULL GLASS

FG1' -

0"

VE

RIF

Y W

/ HD

WR

MTG

HT

1' -

0"

6"6"

8"

6" 10"

8"3'

- 4"

8"3'

- 4"

8"

6"6" 6" 6"

DOOR LOUVERAS SCHED

1' -

0"

REMOVABLE MULLIONAT EXTERIOR DOORS

7' -

2"

7' -

2"

REF SCHEDS1

2"

REF SCHEDS2

2"

REF

SC

HED

REF

SC

HED

2" 2" 2" 2"

FFE

REF

SC

HED

2' -

6"

REF SCHEDS5

2" 2" 2"

2"

2' - 0" 4' - 0"

4"

2"

GLAZING KEYDESCRIPTIONSYMBOL

CLEAR SAFETY GLASS

TINTED INSUL SAFETY GLASS(BLAST MITIGATION)

A7

4' - 0"

6' -

0"3'

- 0"

EXT

G1A521

C1A521

E1A521

A4B

2' -

7"5'

- 5"

4"

8' -

0"

EXT

G7A521

E7A521

A1A521

C7/G7

C10A521

INT

A3B

2' -

7"5'

- 3"

2' -

10"

10' -

8"

4"

EXT

E7A521

A1A521

F6A304

C7/G7A521

INTA2B

5' -

3"1'

- 6"EXT

9' -

4"

2' -

7"

E7A521

A1A521

A3A521

F6A304

C7/G7A521

A5B

4' -

2"5'

- 3"

2' -

7"

4"

7' -

10"

12' -

0"

EXT

E7A521

A1A521

A3A521

F6A304

A4A321

EXTA6

12' - 10"

3' -

0"9'

- 0"

G7A521

E7A521

C7A521

1. REFER TO SHEETS A501 FOR DOOR SCHEDULE.

2. REFER TO SHEET A003 FOR LINTEL SCHEDULES AND DOORAND WINDOW JAMB STUD FRAMING SCHEDULE.

3. ALL DOORS TO BE 1 3/4" THICK (UON)

4. ALL STL FRAMES TO HAVE A 2" FACE DIMENSION UON, W/ 5/8"STOP. 3/4" STOP REQUIRED FOR FIRE RATED FRAMES.

5. STEEL FRAME DEPTHS INDICATED IN THE DETAILS ARENOMINAL. PROVIDE STANDARD WIDTH FRAME WITH THROATOPENING APPROPRIATE TO WALL TYPE.

6. COORDINATE WITH MECH DOCUMENTS FOR DOORUNDERCUTS AND DOOR LOUVERS, IF ANY.

7. ALL LIGHTS IN DOORS TO HAVE SAFETY GLAZING (UON).

8. EXTERIOR DOORS TO HAVE TINTED GLAZING (UON) ANDINTERIOR DOORS TO HAVE CLEAR GLAZING.

9. FIELD VERIFY DIMENSIONS PRIOR TO FABRICATING FRAMES.

10. PROVIDE WD BLKG IN GYP BD WALLS BEHIND DOORSSCHEDULED TO HAVE WALL MOUNTED DOOR STOPS. (REFERHARDWARE SCHEDULE SUBMITTAL).

11. REFER TO A004 FOR TYP WINDOW AND DOOR CONTROLJOINTS IN MASONRY WALLS. REFER TO A004 FOR TYP WINDOWAND DOOR CONTROL JOINTS IN STEEL STUD FRAMED WALLS.

12. FLOOR MATERIAL CHANGES BETWEEN ROOMS TO OCCURUNDER DOOR.

13. PROVIDE TREATED WOOD BLOCKING AT WINDOWSURROUND MEMBERS AS REQUIRED FOR PROPER ATTACHMENTWHERE ALUMINUM WINDOWS ARE TO BE INSTALLED IN EXISTINGMASONRY OPENINGS.

14. FIELD VERIFY DIMENSIONS OF EXISTING FRAMES TO REMAIN.

15. PROVIDE 1: LOUVER BLINDS AT WINDOWS TYPE A7, TYP.

GENERAL DOOR & WINDOW NOTES:

1. PROVIDE DRIP EDGE AT HEAD OF DOOR

2. PROVIDE 2" WIDE ADA COMPLIANT MARBLE THRESHOLD WITHCHAMFERED EDGES AT ENTRY DOOR.

3. PROVIDE COMPLETE DOOR, FRAME & HARDWARE SOUNDSEAL (STC 50) ASSEMBLY PER MANUFACTURER - REF SPECS.

4. PROVIDE 1/2" UNDERCUT AT DOOR - REF MEP.

5. PROVIDE REMOVABLE MULLION.

6. DOOR AS PART OF PRACTICE ROOM SYSTEM - REF SPECS.

SPECIFIC DOOR SCHEDULEREMARKS

STEEL (HM) FRAME TYPE

FRAME TYPE LEGEND

ALUMINUM (STOREFRONT) FRAME TYPE

S1

A1

A101A

WALL/FIXTURE WHERE OCCURS

TYP (UON) OR CENTERDOOR IN WALL (SEE PLAN)

SOUNDSEAL

MULTIPLE DOORDESIGNATION

CLR MIN (AT PUSHSIDE OF DOORWITH CLOSER)

AREA DESIGNATIONSEE KEY PLAN

DOOR/ROOM NO

DOOR MARK KEY

1' - 0"

1' - 6"

4"

N

1

ISSUE:

CHECKED:

SCALE:

© 2014 Stantec

Stantec Project:

SHEET TITLE:

KEY PLAN (NTS)


2 3 4 5 6 7 8 9 10

1 2 3 4 5 6 7 8 9 10

H

G

F

E

D

C

B

A

H

G

F

E

D

C

B

A



P 210.223.9588F 210.223.9589

11/07/14

C:\U

sers

\Pub

lic\D

ocum

ents

\Loc

al_R

evit_

File

s\21

4000

210

FSH

Ban

d H

all A

14_v

sier

ra.rv

t4/

16/2

015

12:0

3:28

PM

As indicatedER


DISTRICT


SAN ANTONIO, TEXAS

DOOR SCHEDULE, INFO,AND FRAME TYPES

A501R214000210

11/07/2014

DOOR SCHEDULEDOOR FRAME DETAILS

FIRE RATING REMARKSNUMBER WIDTH HEIGHT TYPE MATERIAL GLAZING TYPE MATERIAL HEAD JAMB SILL

GROUND LEVEL100A 6' - 2" 7' - 10" FGIR ALUM SFTY A5B ALUM G1/A521 E1/A521 NA 5100B 3' - 6" 7' - 10" FGIR ALUM SFTY A2B ALUM G1/A521 E1/A521 NA100C 3' - 6" 7' - 10" FGIR ALUM SFTY A2B ALUM G1/A521 E1/A521 NA101 3' - 0" 7' - 0" F WD NA S1 STL A7/A521 A10/A521 - NA102 3' - 0" 7' - 0" F WD NA S1 STL A7/A521 A10/A521 - NA103 3' - 0" 7' - 0" F WD NA S1 STL A7/A521 A10/A521 - NA 2104 3' - 0" 7' - 0" F WD NA S1 STL A7/A521 A10/A521 - NA 2105A 4' - 0" 7' - 0" NL WD SFTY S1 STL G5/A521 E5//A521 - NA 3105B 4' - 0" 7' - 4" F STL NA S1 STL G3/A521 E3/A521 NA 1106 4' - 0" 7' - 0" NA A7/A521 A10/A521 - NA108 3' - 0" 7' - 0" MANUF MANUF MANUF MANUF MANUF MANUF MANUF NA 6109 3' - 0" 7' - 0" MANUF MANUF MANUF MANUF MANUF MANUF MANUF NA 6110 4' - 0" 7' - 0" NA A7/A521 A10/A521 - NA111 3' - 0" 7' - 0" F WD NA S1 STL G5/A521 E5/A521 NA112A 4' - 0" 7' - 0" HL WD SFTY S1 STL G5/A521 E5/A521 NA 3112B 3' - 6" 7' - 0" HL WD SFTY S1 STL G5/A521 E5/A521 NA 3113 3' - 0" 7' - 0" F WD NA S1 STL G5/A521 E5//A521 - NA 2114 3' - 0" 7' - 0" F WD NA S1 STL G5/A521 E5//A521 - NA115A 3' - 6" 7' - 0" NL WD SFTY S1 STL G5/A521 E5//A521 - NA 3115B 4' - 0" 7' - 4" F STL NA S1 STL G3/A521 E3/A521 NA 1117 3' - 0" 7' - 0" MANUF MANUF MANUF MANUF MANUF MANUF MANUF NA 6118 3' - 0" 7' - 0" MANUF MANUF MANUF MANUF MANUF MANUF MANUF NA 6119 4' - 0" 7' - 0" NA A7/A521 A10/A521 - NA120 4' - 0" 7' - 0" NA A7/A521 A10/A521 - NA121 4' - 0" 7' - 0" F WD NA S1 STL G5/A521 E5//A521 - NA123 4' - 0" 7' - 4" F STL NA S1 STL G3/A521 E3/A521 NA

DOOR FRAME TYPESDOOR TYPES

NOTE: WINDOW TYPES A2A, A3A & A8 SHALL BE HAVE BOTH EXTERIOR & INTERIOR APPLICATIONS AS FOLLOWS;- INTERIOR SHALL HAVE CLEAR SAFETY GLASS- EXTERIOR SHALL HAVE TINTED INSULATED SAFETY GLASS - BLAST MITIGATION

- ALL INTERIOR STOREFRONT FRAME TYPES SHALL BE: KAWNEER 451 WITH SINGLE GLAZING, BASIS OF DESIGN (TYP).- ALL EXTERIOR STOREFRONT FRAME TYPES SHALL BE: KAWNEER IR 501 BLAST MITIGATION, BASIS OF DESIGN(TYP), EXCEPT FRAMES A2B & A5B SHALL BE KAWNEER 1600 BLAST RESISTANT. ALL BLAST MITIGATION SYSTEM SHALL BE DOUBLE GLAZING SYSTEM WITH 1/2" AIR SPACE, BASIS OF DESIGN.

WINDOW TYPES

HLHL

HL

HL WD

WD

WDWD

S5

S5

S5S5

STL

STL

STLSTL

2 04/07/2015 V.E. ITEMS

F6/A304

G5/A521 E5 /A521

G5/A521 E5 /A521

A3 /A521

A3 /A521

IV2

WOMEN TLT104

7 1/

4"

5' -

0"EQ

.18

' - 0

"EQ

.5'

- 0"

1' -

1 7/

8"

5' - 0" 3' - 0" 2' - 6"103

104

A401R

B6

B5

B3

A401RA5

A3

A6

3' -

0"3'

- 3"

3' -

1"3'

- 6"

RISER123

CUST102

ELEC101

123

3' -

6"3'

- 1

1/2"

3' -

2 1/

2"3'

- 0"

101

102

B8

A8

1' -

4"

6"3'

- 0"

6"

3' - 4"

G

G

J

J

5

16

1' -

7"3'

- 0"

1' -

5"4'

- 5

3/4" 7

1/4"

A401RA2

A1

9

13

PONY WALL 7'-0"

MEN TLT103

5' - 0" 3' - 0 3/8" 2' - 5 3/4" 1' - 1 7/8"

6 1/

2"

1' - 4 3/4"

1' - 0 1/2"

5' - 3 1/4" 6' - 7"

1' -

4"

3' - 9 1/2"

A6

A6

2' -

3 1/

2"

1' - 2 3/8"

1' - 2 3/8"

2' - 9 1/8"1' - 0 3/8"

2' - 4 1/8" 5 1/4" 11' - 6"

2' -

10 7

/8"

3' -

1"6'

- 4"

5' -

1"6'

- 6

1/8"

5' -

1"

26B

24 24A

24A

24B

24

24B

24

24

24B26B

24A

24A

2626

26

26

24A

26

26

24A

26

24

26

26B

26B

26B

26

CT5

6' -

0"

EQ 12' - 0" EQ

CT4

3' -

0"C

T53'

- 0"

PB1C

T56'

- 0"

9.15

P2

PB1

WOMEN TLT104

CUST102

RISER123

ELEC101

G

G

H

H

J

J

5

16

8' - 0"GWB1

8' - 0"GWB1

12' - 0"GWB1

12' - 0"GWB1

8' - 0"GWB1

EQEQ

EQEQ

9

13

F5A631R

F5A631R

F5A631R

MEN TLT103

10' - 6"

10' - 6"

F7A631R

F7A631R

CT5

6' -

0"

9.15

EQ 12' - 0" EQ

CT5

3' -

0"C

T43'

- 0"

PB1

CT5

6' -

0"

PO

NY

WA

LL7'

- 0"9.15

P2

PB1

STAFF TLT113

A401RE8

E7

D7

D8

F

10

1' -

6"1'

- 8"

8

9

1' -

1 7/

8"2

7/8"CT4

3' - 0" CT6

(14 LOCKERS)

A6

9.15

P2

PB1

(14 LOCKERS)

A6

PO

NY

WA

LL7'

- 0"

9.15

PB1C

T56'

- 0"

CT4

3' -

0"C

T53'

- 0"

1' - 10 7/8" 6' - 0" 0"

6"

CT5

6' -

0"

4"

PB1

10.19

22.3

(CT1

)4'

- 0"

5.4

2' - 6"

22.3

10.19

5.4

(CT1

)4'

- 0"

4' - 6"

CEILING LEGEND

SUSPENDED GYP BD CEILINGSYSTEM OR GYP BD BULKHEADREF DWGS.

2'-0" x 4'-0" ACOUSTIC PANELCEILING SYSTEM. PER FINISHSCHEDULE

10'-8"

SUSPENDED WOODGRILLE CEILING SYSTEM .PER FINISH SCHEDULE

RECESSED 2' X 4' LIGHTFIXTURE REF MEP DOC

ELEVATION HEIGHT SYMBOLINDICATES HEIGHT OF CEILINGABOVE FINISH FLOOR ANDCEILING TYPE. SEE FINISHSCHEDULE FOR MOREINFORMATION.

RECESSED LIGHTING FIXTUREREF MEP DOC

PENDANT MTD LIGHT FIXTUREREF MEP DOC

NOTE: EXIT LIGHTING FIXTURES- REF MEP DOCS

SUPPLY AND RETURN AIRGRILLS. REF MEP DOCS

EXPOSED STRUCTUREOR OPEN TO BELOW

APC1

WALL MOUNTEDWATER CLOSET

WALL MOUNTED ACCWATER CLOSET

LAVATORY

ACC LAVATORY

ACC URINAL

MOP RACK

MOP BASIN

TOILET TISSUEDISPENSER (TTD)

SANITARY NAPKINDISPOSAL UNIT (SNDU)

FRAMED MIRROR(18"X36" UON) AT HS

ELECTRIC WATERCOOLER (EWC)

ACC ELECTRICWATER COOLER

TOILET ROOM LEGEND

TYPICAL WALL LAVATORY

WALL MOUNTEDLAVATORYFRAMED TEMPEREDGLASS MIRROR.REFER MOUNTINGHEIGHTS FORACCESSIBLE MIRRORELEVATION HT

TOILET PLANGENERAL NOTES1. REFER TO SHEETS A009 FOR WALL TYPES, UON.

2. ALL TOILET ROOM WALLS TO DECK, UON.

3. PROVIDE ACOUSTICAL BATT INSULATION IN STUDCONSTRUCTION WALLS SURROUNDING TOILETROOMS.

4. PROVIDE WALL MOUNTED DOOR STOPS INRESTROOMS.

5. REFER TO SHEET A801 FOR INTERIOR FINISHES.

6. REFER TO 'TOILET ROOM LEGEND' ON A401 FORFIXTURES AND ACCESSORY INFO, TYP.

7. PROVIDE THE SAME FIXTURES AND ACCESSORIESAT ALL SINGLE ACCESSIBLE TOILET ROOMS WHICHARE TO BE PROVIDED AT TYPICAL FIXTURES, ASINDICATED IN 'TOILET ROOM LEGEND.' PROVIDEACCESSORIES FOR ACCESSIBLE WATER CLOSETS ASINDICATED FOR A 'TYPICAL ACCESSIBLE STALL,'PROVIDE ACCESSORIES FOR ACCESSIBLELAVATORIES AS INDICATED FOR A 'TYPICALACCESSIBLE WALL LAVATORY.

8. REFER TO 'FIXTURE MOUNTING HEIGHT SCHEDULE'ON A401 FOR MOUNTING HEIGHT INFO, TYP ALLACCESSIBLE FIXTURES AND EQUIPMENT ARE TO BEMOUNTED AT SPECIFIED SCHOOL HEIGHTS, UON BY'ACF' (ADULT ACC FIXTURE), TYP.

9. COORDINATE INSTALLATION OF REQD BLOCKINGAND STABILIZING FOR FIXTURES.

10. THE STRUCTURAL STRENGTH OF GRAB BARS,SHOWER SEATS, FASTENERS AND MOUNTINGDEVICES AT ACCESSIBLE WATER CLOSETS ANDSHOWERS SHALL COMPLY WITH ADA AND TASREQUIREMENTS.

N

1

ISSUE:

CHECKED:

SCALE:

© 2014 Stantec

Stantec Project:

SHEET TITLE:

KEY PLAN (NTS)


2 3 4 5 6 7 8 9 10

1 2 3 4 5 6 7 8 9 10

H

G

F

E

D

C

B

A

H

G

F

E

D

C

B

A



P 210.223.9588F 210.223.9589

11/07/14

C:\U

sers

\Pub

lic\D

ocum

ents

\Loc

al_R

evit_

File

s\21

4000

210

FSH

Ban

d H

all A

14_v

sier

ra.rv

t4/

16/2

015

12:0

3:17

PM

As indicatedChecker


DISTRICT


SAN ANTONIO, TEXAS

ENLARGED TOILETROOMS

A401R214000210

11/07/2014

1/4" = 1'-0"D5ENLARGED TOILET ROOMS PLAN

1/4" = 1'-0"B3WOMEN TLT - ELEVATION



1/4" = 1'-0"D3ENLARGED TOILET ROOMS RCP

1/4" = 1'-0"A3MEN TLT - ELEVATION



1/4" = 1'-0"G7STAFF TOILET ROOM PLAN



1/4" = 1'-0"E7STAFF TLT - ELEVATION 1/4" = 1'-0"E8

STAFF TLT - ELEVATION

1/4" = 1'-0"D7STAFF TLT - ELEVATION

1/4" = 1'-0"D8STAFF TLT - ELEVATION

1/4" = 1'-0"A1CUST - ELEVATION

1/4" = 1'-0"A2CUST - ELEVATION


5.4 PAINTED STEEL SHIP'S LADDER9.1510.19 MOP & BROOM HOLDER RACK22.3 PLUMBING FIXTURE. SEE PLUMBING DWGS

2 04/07/2015 V.E. ITEMS

DOUBLE TIER LOCKER WITH BENCH

NOTE: ALL TLTS FIXTURES TO BE ADULT HEIGHT

TYPICAL TLT TILE LAYOUT

CT5CT5

CT4

CT4 CT6

GROUND LEVEL100' - 0"

LIBRARY/STORAGE110 BAND HALL

105

CHORAL HALL115

13101921 713

MECH PLATFORM201

ENSEMBLE112

LIBRARY119

105B

CRAWL SPACE

ACOUSTICAL PANEL

LIGHT FIXTURE, REFELECTRICAL DOCS

115B


BAND HALL105

CORRIDOR100

MECH PLATFORM200

B C F G J K

111 112A

MEN TLT103

CRAWL SPACE

8' -

8"


13101922 13

A7

105A113 114 115A 120

A7A5BCORRIDOR

100 OFFICE120

10.4

CRAWL SPACE

N

1

ISSUE:

CHECKED:

SCALE:

© 2014 Stantec

Stantec Project:

SHEET TITLE:

KEY PLAN (NTS)


2 3 4 5 6 7 8 9 10

1 2 3 4 5 6 7 8 9 10

H

G

F

E

D

C

B

A

H

G

F

E

D

C

B

A



P 210.223.9588F 210.223.9589

11/07/14

C:\U

sers

\Pub

lic\D

ocum

ents

\Loc

al_R

evit_

File

s\21

4000

210

FSH

Ban

d H

all A

14_v

sier

ra.rv

t4/

16/2

015

12:0

2:51

PM

1/8" = 1'-0"WM


DISTRICT


SAN ANTONIO, TEXAS

BUILDING SECTIONS

A211R214000210

11/07/2014

1/8" = 1'-0"F1BUILDING SECTION

1/8" = 1'-0"D1BUILDING SECTION

1/8" = 1'-0"A1BUILDING SECTION

2 04/07/2015 V.E. ITEMS

EXTERIOR ENVELOPE NOTES1 FIRST FLOOR REFERENCE ELEVATION 100' - 0" = 674.30' (674.30'' DATUM, REFER TO CIVIL)

2 MAINTAIN WATERPROOFING FLUID CONTINUITY THROUGHOUT EXTERIOR ENVELOPE. SEAL ALL SEAMS, JOINTS, PENETRATIONS &

TERMINATIONS TO OTHER SUBSTRATES.

3 CURTAIN WALL / STOREFRONT SYSTEMS TO HAVE CLOSED HEAD, JAMB & SILL PROFILES.

4 FILL ALL VOIDS AROUND GLAZING SYSTEM PERIMETER WITH MINERAL WOOL INSULATION.

5 EXTERIOR STEEL (I. E. RELIEF ANGLES, PLATES, LINTELS, ETC), ARE TO BE GALVANIZED, UNLESS NOTED OTHERWISE.

6 EJ - INDICATES MASONRY EXPANSION JOINT LOCATIONS. FOR LOCATIONS NOT SHOWN, PROVIDE JOINTS 3' - 4" FROM OUTSIDE CORNERS AND SPACED MAXIMUM 20' - 0" OC.

7 CONTINUE MASONRY ACCENT SCHEME AT ALL EXTERIOR WALLS, INCLUDING AT ENTRIES, COLUMNS AND WALLS NOT SHOWN ON ELEVATIONS, UNLESS NOTED OTHERWISE.

EXTERIOR TINTED INSULATING & BLAST RESISTANT GLASS UNIT

ALL EXTERIOR GLAZING FOR THE FSHISD BAND HALL BUILDINGSHALL BE BLAST MITIGATION (BLAST RESISTANT) PER FT. SAMHOUSTON DESIGN STANDARDS.

GLASS THICKNESS DESIGNATION INDICATED ARE MINIMUMS &ARE FOR DETAILING ONLY. GLAZING TRADE CONTRACTOR TODETERMINE SAFETY GLAZING REQUIREMENTS & TO CONFIRMGLASS THICKNESS BY ANALYZING PROJECT LOADS, IN-SERVICECONDITIONS & GLASS LOCATIONS. PROVIDE GLASS LITES /UNITS IN THE THICKNESS DESIGNATIONS INDICATED ABOVE FORVARIOUS SIZE OPENINGS, BUT NOT LESS THAN THICKNESS & INSTRENGTH (ANNEALED, TEMPERED OR HEAT TREATED)REQUIRED TO MEET OR EXCEED CODE & PERFORMANCECRITERIA, RE: SPECIFICATION SECTION 08 8000.

ALL EXTERIOR GLAZING IS TINTED, INSULATING & BLASTRESISTANT, UNLESS OTHERWISE NOTED.

ALL EXTERIOR DOOR GLAZING IS TINTED, INSULATING & BLASTRESISTANT, UNLESS OTHERWISE NOTED.

EXTERIOR GLASS GENERAL NOTES

1.

2.

3.

4.



ABHJK

B.O

. FAN

(TYP

)21

' - 0

"

A7 A7

PRE-FINISHED MTL COPING- REF ROOFING DETAILS

PRE-FINISHED MTL FASCIA(TYP)

PRE-FINISHED ALUMINUMPERFORATED SCREEN

GALVANIZED STL FRAME -REF STRUCTURAL DWGS

PRE-FINISHED ALUMINUMPLATE PANELS

EXTERIOR CEILINGFAN BEYOND

MASONRY CJ(TYP)BK1/BK2

MP1PRE-FINISHED MTL GUTTER& DOWNSPOUTS

CONTINUOUS PRE-FINISHEDMTL FASCIA(TYP)

NOTE: ROOF PENETRATIONS -REF MEP & ROOFING DTLS(TYP)

CJ

EXTERIOR BENCHES BEYOND- REF SITE PLANS

CJ CJCJ

BK1/BK2

MP2

CJ

STEEL LADDER,REF ROOF PLAN



A B F G J K

B.O

. FAN

(TYP

)21

' - 0

"

A7 A7

A5B

100AMP2


PRE-FINISHED MTLFASCIA(TYP)





MASONRY CJ(TYP)BK1/BK2MP1BK1/BK2BK1/BK2

BK1/BK2

(TYP @ BENCHES)

MP1

PRE-FINISHED MTL GUTTER& DOWNSPOUTS

CONTINUOUS PRE-FINISHEDMTL FASCIA(TYP)

NOTE: ROOF PENETRATIONS -REF MEP & ROOFING DTLS(TYP)

CJ CJ CJ CJ

EXTERIOR BENCHES -REF SITE PLANS



135611151618192122

A7

A4BA3B

A2B

A6 A6

A4BA3B A2B A7

123100B 100C

CJCJ CJCJ

NOTE: EXTERIOR BENCHES IN FOREGROUNDNOT SHOWN - REF FLOOR PLANS

BK1/BK2


PRE-FINISHED MTLFASCIA(TYP)







EXTERIOR CEILING FANBEYOND

GALVANIZED STL FRAME -REF STRUCTURAL DWGSPRE-FINISHED

MTL FASCIA(TYP)


EXTERIOR BENCH ANDPLANTERS BEYOND -REF SITE PLAN


STOREFRONT DOOR &WINDOW FRAME


MASONRY CJ(TYP)MP1MP1

BK1/BK2

MP2



1 3 6 14 19 21 229

105B115B

CJ

CJ CJ CJ

CJ

BK1/BK2


PRE-FINISHED MTL FASCIA(TYP)

PRE-FINISHED ALUMINUMPERFORATED SCREEN BEYOND

GALVANIZED STL FRAME BEYOND- REF STRUCTURAL DWGS



MASONRYCJ (TYP)

MP1MASONRYCJ (TYP)

SLOPING METAL ROOFBEYOND


SLOPING METAL ROOF BEYOND PRE-FINISHED METALGUTTER & DOWNSPOUTS(DS)

DSDSDSDSDSDS

MECH YARD- REF MEP

WALL MOUNTED LIGHTFIXTURE - REF MEP

MP1MP1

BK1/BK2WALL MOUNTED LIGHTFIXTURE - REF MEP

MECH LOUVER- REF MEP

EXTERIOR BENCHESBEYOND - REF SITE PLAN

STEEL LADDER,REF ROOF PLAN

BK1/BK2BK1/BK2BK1/BK2 BK1/BK2

CH

AIN

LIN

K8'

- 0"

CJ

WALL MOUNTED LIGHTFIXTURE - REF MEP(TYP)

PRE-FINISHED MTL COPING

BK1: BRICK VENEERFIELD COLOR(TYP) -REF FINISH SCHED.

BK2: BRICK VENEERACCENT COLOR, BLACK(TYP) - REF FINISHSCHED.

NOTE: 'BK2' BRICK VENEER ACCENT COLOR, BLACKSHALL BE APPROXIMATELY 15% OF BRICK VENEER,RANDOM PATTERN AS SHOWN HERE. TYP AT ALLBRICK VENEER WALLS & MASONRY BENCHES.

MRK PANEL PROFILE

1 1/

2"

12"

1 1/

2" 16"

.

.

.MP2 - METALWALL PANEL

MBCI FW-120 / NO BEADS, SMOOTHCOLOR: GREEN

NOTE: REFER TO FINISH MATERIAL SCHEDULES FOR FURTHER PANEL DESCRIPTION

MP3 - ALUMINUMPERFORATEDPANEL

CENTRIA PERFORATED PANEL3/4" ECONOLAP

3/4"

MBCI SHADOWRIB SMOOTHCOLOR: SIGNATURE 300 METALIC

MP1 - METALWALL PANEL

N

1

ISSUE:

CHECKED:

SCALE:

© 2014 Stantec

Stantec Project:

SHEET TITLE:

KEY PLAN (NTS)


2 3 4 5 6 7 8 9 10

1 2 3 4 5 6 7 8 9 10

H

G

F

E

D

C

B

A

H

G

F

E

D

C

B

A



P 210.223.9588F 210.223.9589

11/07/14

C:\U

sers

\Pub

lic\D

ocum

ents

\Loc

al_R

evit_

File

s\21

4000

210

FSH

Ban

d H

all A

14_v

sier

ra.rv

t4/

16/2

015

12:0

2:38

PM

As indicatedER


DISTRICT


SAN ANTONIO, TEXAS

EXTERIOR ELEVATIONS

A201R214000210

11/07/2014

REFERENCED ON /A1 A111 1/8" = 1'-0"G1EXTERIOR ELEVATION - NORTH

REFERENCED ON /A1 A111 1/8" = 1'-0"E1EXTERIOR ELEVATION - SOUTH

REFERENCED ON /A1 A111 1/8" = 1'-0"C1EXTERIOR ELEVATION - EAST

REFERENCED ON /A1 A111 1/8" = 1'-0"A1EXTERIOR ELEVATION - WEST

NTSE7SE PERSPECTIVE VIEW

2 04/07/2015 V.E. ITEMS

C1

A201

E1

A201

1/8" = 1'-0"A9TYPICAL BRICK PATTERN ELEVATION

NOTE: REFER TO A9/A201 'TYPICAL BRICK PATTERN ELEVATION' FOR BRICK VENEER DESIGN INTENT AT ALL BRICK VENEER WALLS.




A201R

E1

758 SF

MECH PLATFORM200

F1A211R

F1A211R

A201RC1A201R A1

A201R

G1

D1A211R

D1A211R

B C F G J

1

3

5

10

16

REF A611

REF A611

E1A631R

B1A631R

A1A304

A5A304

A7A303

A4A303

A1A303

A6A302

A4A302

A1A302

A1A301

A3A301

A5A301

A3Sim

A301

A1Sim

A301

A1Sim

A302

19

21

7

A1A211R

A1A211R

OPEN TOBELOW

14' - 0"

14' - 0"

723 SF

MECH PLATFORM201

46' - 5 3/8"

18' -

7 1

/4"

14' - 10 5/8"

5.4

57' -

7 1

/4"

ROOF BELOW

ROOF BELOW

SUN SHADE DEVICE, REF EXTERIOR ELEVATIONS

MECHANICAL DUCTS, REF MEP DOCUMENTS

ROOF LADDER,REF ROOF PLAN

A201R A9 5' - 0"

4' -

0"

2' - 6"

5' - 0"

4' -

0"

2' - 6"

5.4

REMOVABLE GUARDRAIL REFDET G4/A321

REMOVABLE GUARDRAIL REFDET G4/A321

REF DET D4/A005

REF DET D4/A005

BIG EXTERIOR FAN, REF MECH & ELEC DOCS

BIG EXTERIOR FAN, REF MECH & ELEC DOCS

ADD 2

ADD 2

N

1

ISSUE:

CHECKED:

SCALE:

© 2014 Stantec

Stantec Project:

SHEET TITLE:

KEY PLAN (NTS)


2 3 4 5 6 7 8 9 10

1 2 3 4 5 6 7 8 9 10

H

G

F

E

D

C

B

A

H

G

F

E

D

C

B

A



P 210.223.9588F 210.223.9589

11/07/14

C:\U

sers

\Pub

lic\D

ocum

ents

\Loc

al_R

evit_

File

s\21

4000

210

FSH

Ban

d H

all A

14_v

sier

ra.rv

t4/

16/2

015

12:0

2:13

PM

1/8" = 1'-0"WM


DISTRICT


SAN ANTONIO, TEXAS

MEZZANINE FLOOR PLAN

A121R214000210

11/07/2014

REFERENCED ON / 1/8" = 1'-0"A1MEZZANINE FLOOR PLAN

2 04/07/2015 V.E. ITEMS

V.E. Items

____________________________________________________________

Alderson & Associates, Inc.|Consulting Engineers|Firm No. F1008 7700 Torino, Suite 101 | San Antonio, TX 78229 |P: (210) 614-1110

Date: April 7, 2015 Client: Stantec Project Name: New Band Hall – Cole High School, Ft. Sam Houston ISD Project Number: 14-066 This addendum is generally separated into sections for convenience; however, all contractors, subcontractors, material men and other parties shall be responsible for reading the entire addendum. The failure to list an item or items in all affected sections of this addendum does not relieve any part affected from performing as per instructions, providing that the information is set forth one time any place in this addendum. These documents shall be attached to and become part of the Contract Documents for this project. PLAN ITEMS

RE: Plan Sheet M111:

Item 1: Replaced slot diffusers with 2’x2’ supply diffusers. Item 2: Added 2’x2’ return air grilles. Item 3: Changed round supply duct to rectangular duct and updated supply silencers S-1, S-2 and S-3 to

rectangular silencers.

RE: Plan Sheet M301: Item 1: Updated Air Device Schedule to reflect changes to air devices.

RE: Plan Sheet M302: Item 1: Updated Sound Attenuator Schedule to reflect changes to S-1, S-2 and S-3.

RE: Plan Sheet E111:

Item 1: Replaced decorative pendant light fixture types ‘P2’ and ‘P2E’ with dimmable 2x4 LED volumetric light fixture types ‘A2’ and ‘A2E’ in Choral Hall 115 and Band Hall 105.

RE: Plan Sheet E211:

Item 1: Removed power and switch for shades in Choral Hall 115 and Band Hall 105.

RE: Plan Sheet E501: Item 1: Removed decorative pendant light fixture types ‘P2’ and ‘P2E’. Item 2: Added dimmable 2x4 LED volumetric light fixture types ‘A2’ and ‘A2E’.

END OF ITEMS FOR V.E. xx

F-2

VFC-4

VCU-2

VCU-1

VCU-3

MS-CU-1

VFC-6

VFC-5

MS-1

A B C F G H J K

1

2

3

4

5

6

10

11

12

14

15

16

17

D E

1819

20

21

7

8

9

13

XA1390

SA7390

SA630

EA260

SA470

SA470

EA1150

EA1150

SA7360

SA2140

SA3280

SA2190

SA160

RA1140

RA1125

SA2145

GV-1SA2150

8"x10"

8"ø

6"ø

6"ø8"

ø

8"ø

12"x12"

12"x10"

6"x6

"

6"x6

"

12"x

6"

12"x

6"

12"x

10" 12"x10"

SA430

RA1225

VOA-1

RA1100

RA1185

12"x

6"

SA5185

8"ø

8"x8"

6"ø

6"ø

10"x10"

10"x10"

6"ø

10"x12"

10"ø

8"ø

12"x10"16"x

12"

16"ø

16"ø12"ø

VOA-3

30"x

14"

26"x

14"

GV-2

12"x10" 12"x10"

RA1275

12"x

6"

6"x6

"

6"x6

"

12"x

6"

RA1175

SA2195

8"ø6"

øSA21756"

ø

8"ø

SA2175

12"x12"8"x10"

6"x6"

6"x6"

12"x10"

12"x12"

8"ø

SA5185

26"x10"

24"x

14"

48"x18"

36"x10"

30"x

14"

16"ø

16"ø

1

2

1

1

1

1

3 3

4

4

5

6

7

7

7

7 3

8

8

9

3

3

9

3

3

3

3

3

10

T VFC-6

TVFC-1

TVFC-2AVFC-2B

T VFC-4

TVFC-3

TVFC-5

CORRIDOR100

LIBRARY/STORAGE110

C PRACTICE118

IDF114

CHORAL HALL115

RISER123

ENSEMBLE112

STAFF TLT113

HALL116

STORAGE121

MEN TLT103

CUST102

UNIFORM STOR111

OFFICE120

WOMEN TLT104

ELEC101

LIBRARY119

B PRACTICE109

B PRACTICE108

OFFICE106

BAND HALL105

F-3

F-4

F-5

6"ø

6"ø

11

TMS-1

16"x

12"

16"x

12"

20"x

14"

20"x

14"

S-3

S-1 S-2

10"x8"

12

20"x

14"

T

13

14 (TYP. 4)

14(TYP. 4)

15

1516

16

17

GV-38

10"x

10"

10"x10"

18

19

SA3285

SA3315

SA3320

SA3320

SA3315

SA3315

SA3285

SA3285

SA3285

SA3280

SA3315

SA3315

SA3320

SA3320

SA3315

10"ø 10"ø

10"ø

10"ø

10"ø 10"ø

10"ø

10"ø

10"ø

10"ø

10"ø

10"ø

10"ø

10"ø

10"ø

SA3320

SA3320

10"ø

10"ø

10"øSA3320

SA3315

SA3315

10"ø

10"ø

10"ø SA3315

SA3315

10"ø

10"ø

RA2RA2

RA2

RA2

RA2

RA2

SA3320

2

2

PR

OJEC

T #14 066

7700 Torino St, Suite 101San Antonio, TX 78229

Telephone: 210.614.1110© 2014 Alderson & Associates, Inc.

F-1008

N

1

ISSUE:

CHECKED:

SCALE:

© 2014 Stantec

Stantec Project:

SHEET TITLE:

KEY PLAN (NTS)

2 3 4 5 6 7 8 9 10

1 2 3 4 5 6 7 8 9 10

H

G

F

E

D

C

B

A

H

G

F

E

D

C

B

A

FINAL PLANS FOR BIDDING ANDCONSTRUCTION



P 210.223.9588F 210.223.9589

11/7/2014

SAN ANTONIO, TEXAS


DISTRICT

C:\U

sers

\kel

ley\

Doc

umen

ts\1

4066

- M

echa

nica

l Cen

tral -

CF1

4_ke

lley.

rvt

4/7/

2015

3:3

0:46

PM

1/8" = 1'-0"DTA


MECHANICAL FLOORPLAN - LEVEL 1

M111R13-08

11-07-2014

SCALE: 1/8" = 1'-0"1 MECHANICAL FLOOR PLAN - LEVEL 1

(THIS SHEET ONLY)KEYED NOTES

GENERAL MECHANICAL NOTES1. ALL WORK SHALL BE IN ACCORDANCE WITH THE INTERNATIONAL

BUILDING CODE,THE INTERNATIONAL MECHANICAL CODE, AND THEOTHER CODES AND ORDINANCES OF THE AUTHORITY HAVINGJURISDICTION.

2. DUCT DIMENSIONS INDICATED ARE INSIDE DIMENSIONS CLEAR.

3. ALL RECTANGULAR SUPPLY AND RETURN DUCTS SHALL HAVE TURNINGVANES AT EACH 90 DEGREE ELBOW OR TEE.

4. ALL DUCT SHALL BE SHEETMETAL AND SHALL BE INSTALLED WITHINSULATION AS SPECIFIED.

5. ALL DUCTWORK SHALL BE FABRICATED AND INSTALLED AS PER ASHRAEAND SMACNA STANDARDS.

6. MOUNT ALL THERMOSTATS AND SENSORS AT 3'-8" A.F.F.

7. PROVIDE AND INSTALL A SPIN-IN TYPE TAKE-OFF W/ VOLUMECONTROL DAMPER ON EACH ROUND SUPPLY BRANCH DUCT SERVING ASUPPLY DIFFUSER/REGISTER.

8. COORDINATE ALL DUCTWORK, GRILLES, AND EQUIPMENT WITH ALLTRADES BEFORE INSTALLING.

9. TRANSITION SUPPLY, RETURN AND EXHAUST DUCT FROM UNIT CONNECTIONSIZE TO DUCT SIZE SHOWN.

10. PROVIDE AND INSTALL VIBRATION ISOLATORS ON ANY EQUIPMENT WITHMOVING PARTS.

11. DUCT SMOKE DETECTORS TO BE PROVIDED AND INSTALLED BY THEFIRE ALARM SYSTEMS INSTALLER. COORDINATE WITH MECHANICALCONTRACTOR. INSTALL DETECTOR IN RETURN DUCT NEAR UNITCONNECTION. THE MECHANICAL CONTRACTOR SHALL BERESPONSIBLE FOR WIRING BETWEEN THE FIRE ALARM LOW VOLTAGERELAY AND THE HVAC CONTROL EQUIPMENT.

12. ALL UNITS MUST BE INSTALLED LEVEL.

13. PROVIDE CANVAS CONNECTION AT UN-ISOLATED FAN DUCTCONNECTIONS.

14. COORDINATE WITH ELECTRICAL TRADE FOR STARTERS ON EXHAUSTFANS; SEE NOTES IN FAN SCHEDULES AND ON PLANS. MECHANICALCONTRACTOR TO PROVIDE LAMINATED SIGN AT EACH SWITCH STATINGMARK NUMBER.

15. COORDINATE LOCATIONS OF NEW MECHANICAL EQUIPMENT WITHGENERAL CONTRACTOR AND STRUCTURE, TYPICAL. WHERE SIGNIFICANTCHANGES ARE REQUIRED, THE CONTRACTOR SHALL PRESENT POTENTIALMODIFICATIONS TO, AND OBTAIN APPROVAL FROM THE ENGINEER PRIORTO PROCEEDING WITH SAID WORK.

16. CAREFULLY PROTECT ALL EQUIPMENT AND MATERIAL PRIOR TOINSTALLATION. SEE SPECIFICATIONS.

17. ALL CONDENSATE DRAIN PIPING SHALL BE TYPE L COPPER, GRADEPIPING AT 1/8" PER FOOT. (MIN.).

18. PROVIDE MANUFACTURER'S RECOMMENDED CLEARANCES FOR ALLMECHANICAL EQUIPMENT.

19. SIZE AND ROUTE REFRIGERANT PIPING PER EQUIPMENTMANUFACTURER'S RECOMMENDATIONS.

20. PROVIDE SOUND CALCULATIONS FOR REVIEW FOR EACH SOUNDATTENUATOR.

21. FIRE ALARM CONTRACTOR MUST PROVIDE A SMOKE DETECTORNEAR EACH FIRE/SMOKE DAMPER. ELECTRICAL CONTRACTOR MUSTPROVIDE POWER TO EACH FSD. COORDINATE THESE REQUIREMENTSWITH OTHER TRADES.

22. CONSTRUCTION ACTIVITIES SHALL NOT IMPEDE OR OBSTRUCT THE MEANSOF EGRESS.

1 FAN-COIL UNIT TO BE SUSPENDED FROM STRUCTURE. LOCATE UNIT ABOVECEILING.

2 LOCATE MINI-SPLIT UNIT ABOVE DOOR, AS HIGH AS POSSIBLE.3 REFERENCE #1/M121 FOR CONTINUATION.4 16" DIA. OUTSIDE AIR DUCT UP TO MEZZANINE ABOVE. REFERENCE #1/M121

FOR CONTINUATION.5 6" DIA. EXHAUST DUCT UP THRU MEZZANINE ABOVE. REFERENCE #1/M121 FOR

CONTINUATION.6 LOCATE BOTTOM OF AIR DEVICE AT 13'-6" AFF.7 OUTDOOR UNITS TO BE LOCATED ON CONCRETE HOUSEKEEPING PAD.

REFERENCE STRUCTURAL DRAWINGS FOR HOUSEKEEPING PAD DETAIL.8 GRAVITY VENTILATOR LOCATED ON ROOF. COORDINATE ROOF PENETRATION

WITH STRUCTURE.9 LOCATE AIR DEVICE AT 14'-0" AFF.10 RETURN AIR DUCT OPEN TO PLENUM SPACE.11 REFERENCE DETAIL #8/M402 FOR RETURN AIR TRANSFER DETAIL.12 RETURN AIR TRANSFER DUCT LOCATED ABOVE CEILING. REFERENCE #7/M402

FOR RETURN AIR TRANSFER DETAIL.13 PROVIDE SECONDARY DRAIN PAN BELOW UNIT. DRAIN PAN SHALL EXTEND

BENEATH THE CONDENSATE RECEPTOR. REFERENCE PLUMBING DRAWINGSFOR LOCATION OF RECEPTOR.

14 CONNECT DUCT TO AIR DEVICE. AIR DEVICE PROVIDED BY MODULAR ROOMMANUFACTURER.

15 PROVIDE 24V MOTORIZED DAMPER EQUAL TO RUSKIN M# CDRS25 CONTROLDAMPER. DAMPER SHALL BE NORMALL CLOSED, SPRING RETURN, POWEREDOPEN WHEN ASSOCIATED AIR UNIT IS ENERGIZED. BALANCE DAMPER TOINDICATED AIRFLOW WHEN OPENED.

16 RETURN AIR SOUND BOOT. REFERENCE DETAIL #2/M403 FOR SOUND BOOTDETAIL.

17 PROPOSED LOCATION OF DAIKIN BACNET GATEWAY CONTROLLER.REFERENCE ELECTRICAL DRAWINGS FOR REQUIREMENTS.

18 10x10 OUTSIDE AIR DUCT SHALL PENETRATE FLOOR AND TEMRINATE 6"BELOW FLOOR IN CRAWL SPACE. CAULK AND SEAL FLOOR PENETRATION.PROVIDE MESH COVERING OVER OPEN DUCT IN CRAWL SPACE.

19 10x10 EXHAUST AIR DUCT SHALL PENETRATE FLOOR AND TEMRINATE 6"BELOW FLOOR IN CRAWL SPACE. CAULK AND SEAL FLOOR PENETRATION.PROVIDE MESH COVERING OVER OPEN EXHAUST DUCT IN CRAWL SPACE.

2 04/07/2015 V.E. ITEMS

PR

OJEC

T #14 066



F-1008

1

ISSUE:

CHECKED:

SCALE:

© 2014 Stantec

Stantec Project:

SHEET TITLE:

2 3 4 5 6 7 8 9 10

1 2 3 4 5 6 7 8 9 10

H

G

F

E

D

C

B

A

H

G

F

E

D

C

B

A




P 210.223.9588F 210.223.9589

11/7/2014

SAN ANTONIO, TEXAS


DISTRICT

C:\U

sers

\kel

ley\

Doc

umen

ts\1

4066

- M

echa

nica

l Cen

tral -

CF1

4_ke

lley.

rvt

4/7/

2015

3:3

0:47

PM

DTA


MECHANICAL -SCHEDULES

M301R13-08

11-07-2014

AIR DEVICE SCHEDULE

MARK SERVICE FACE SIZETAP/DUCT

CONN. SIZEMIN.

FLOWMAX.FLOW MAX. NC

THROWPATTERN

MOUNTTYPE

TITUS*MODEL DAMPER FINISH REMARKS

EA1 EXHAUST 12x12 10x10 0 350 15 N/A SURFACE 50R NO WHITE 1/2"x1/2"x1/2" EGGCRATE; STEELEA2 EXHAUST 8x8 6x6 0 100 15 N/A SURFACE 350RL NO WHITE 3/4" BLADE SPACING; STEEL; 35 DEG. DEFLECTIONRA1 RETURN 24x12 22x10 0 600 15 N/A LAY-IN 50R NO WHITE 1/2"x1/2"x1/2" EGGCRATE; STEELRA2 RETURN 24x24 22x22 601 1400 15 N/A LAY-IN 50R NO WHITE 1/2"x1/2"x1/2" EGGCRATE; STEELRA3 RETURN 32x14 30x12 350 1150 15 N/A SURFACE 350RL NO WHITE 3/4" BLADE SPACING; STEEL; 35 DEG. DEFLECTIONSA1 SUPPLY 24x24 6" RND 0 100 20 4-WAY LAY-IN OMNI NO WHITE ARCH. SQUARE PLAQUE DIFFUSER; STEEL; THERMAL BACKPAN BLANKETSA2 SUPPLY 24x24 8" RND 101 220 20 4-WAY LAY-IN OMNI NO WHITE ARCH. SQUARE PLAQUE DIFFUSER; STEEL; THERMAL BACKPAN BLANKETSA3 SUPPLY 24x24 10" RND 221 380 20 4-WAY LAY-IN OMNI NO WHITE ARCH. SQUARE PLAQUE DIFFUSER; STEEL; THERMAL BACKPAN BLANKETSA4 SUPPLY 12x12 6" RND 0 100 20 4-WAY SURFACE OMNI NO WHITE ARCH. SQUARE PLAQUE DIFFUSER; STEEL; THERMAL BACKPAN BLANKETSA5 SUPPLY 14" DIA. 8" RND 0 250 25 360 DEG. HIGH BAY TMR NO WHITE ROUND INTLET; STEELSA6 SUPPLY 8x8 6x6 0 115 20 DOUBLE DEFLECT SURFACE 300RL NO WHITE 3/4" BLADE SPACING; STEEL; DOUBLE DEFLECTIONSA7 SUPPLY 14x12 12x10 115 400 20 DOUBLE DEFLECT SURFACE 300RL NO WHITE 3/4" BLADE SPACING; STEEL; DOUBLE DEFLECTIONXA1 TRANSFER 14x14 12x12 0 400 15 N/A SURFACE 350RL NO WHITE 3/4" BLADE SPACING; STEEL; 35 DEG. DEFLECTION

MINI-SPLIT FAN COIL UNIT SCHEDULE

MARK TYPE SERVICE

ELECTRICAL FAN COOLINGWEIGHT

(LBS) MFG MODEL NOTESVOLTS. PH.MAX AIRFLOW

(CFM)MIN AIRFLOW

(CFM)NOM. CAP.(BTU/HR)

MS-1 WALL MOUNT IDF 114 208 1 570 360 22000 30 DAIKIN FTXN24KVJU 1,2,3

MINI-SPLIT CONDENSING UNIT SCHEDULE

MARK SERVICE

ELECTRICAL COOLINGWEIGHT

(LBS) MFG MODEL NOTESVOLTS PH. MCA (A) MOCP (A)NOM. CAP.(BTU/HR) SEER

MS-CU-1 MS-1 208 1 15.0 20 22000 18.0 100 DAIKIN RKN24KEVJU 1,2

FAN SCHEDULE

MARK SERVICE TYPEWHEELTYPE

AIRFLOW(CFM)

STATICPRESSURE(IN. W.G.)

SOUNDLEVEL

DRIVETYPE

FANSPEED(RPM)

INPUT POWER(WATTS)

MOTORSIZE (HP)

MOTORSPEED (RPM) FAN CONTROL VOLTS. PH.

WEIGHT(LBS) MFG MODEL NOTES

F-1 RESTROOM/JANITOR SQ. IN-LINE BI 360 0.5 7.5 SONES DIRECT 1654 141 1/6 1550 DDC 115 1 100 COOK 90SQN15D 1,2,9F-2 STAFF RESTROOM CEILING/IN-LINE FC 75 0.25 1.6 SONES DIRECT 884 59 FRACTIONAL 884 SWITCH IN SPACE 115 1 40 COOK GC-124 1,2,3,4,5,6F-3 PATIO HVLS AIRFOIL N/A FREE AREA 35 DBA DIRECT 56 300 FRACTIONAL 56 SWITCH IN SPACE 115 1 100 BAF ESSENCE 14 FT 7,8F-4 PATIO HVLS AIRFOIL N/A FREE AREA 35 DBA DIRECT 56 300 FRACTIONAL 56 SWITCH IN SPACE 115 1 100 BAF ESSENCE 14 FT 7,8F-5 PATIO HVLS AIRFOIL N/A FREE AREA 35 DBA DIRECT 56 300 FRACTIONAL 56 SWITCH IN SPACE 115 1 100 BAF ESSENCE 14 FT 7,8F-6 CRAWL SPACE SQ. IN-LINE BI 300 0.5 6.8 SONES DIRECT 1570 137 1/6 1550 DDC 115 1 100 COOK 90SQN15D 1,2,5

GRAVITY VENTILATOR SCHEDULE

MARK SERVICEAIRFLOW

(CFM)THROAT SIZE

(DIA.)

MAX. STATICPRESSURE(IN. W.G.) MFR MODEL

WEIGHT(LBS) NOTES

GR-1 BUILDING RELIEF 2300 16x16 0.05 COOK 16X16 GR 160 1,2,3GV-1 VFC-5 115 8" 0.05 COOK 8 PR 50 1,2GV-2 VFC-6 115 8" 0.05 COOK 8 PR 50 1,2GV-3 CRAWL SPACE VENTILATION 300 12" 0.05 COOK 12 PR 50 1,2

*TITUS IS BASIS OF DESIGN; OTHER ACCEPTABLE MANUFACTURERS INCLUDE KRUEGER, METAL*AIRE, PRICE, NAILOR.GENERAL NOTES:1. FRAMES SHALL BE SUITABLE FOR CEILING OR FINISH TYPE. REFER TO ARCHITECTURAL DOCUMENTS.2. PROVIDE SQUARE TO ROUND ADAPTERS WHERE REQUIRED.3. SEE PLANS FOR ADDITIONAL NOTES ON SPECIFIC ACCESSORIES OR INSTALLATION REQUIREMENTS.

NOTES:1. PROVIDE WITH WIRED WALL-MOUNTED CONTROLLER.2. PROVIDE WITH FACTORY CONDENSATE PUMP.3. FEED THROUGH POWER FROM CONDENSING UNIT.

NOTES:1. PROVIDE WITH REFRIGERANT LINE SETS; CONFIRM SIZES/LENGTHS WITH MANUFACTURER. INSTALL PER MANUFACTURER'S INSTALLATION INSTRUCTIONS.2. PROVIDE WITH 7 YEAR COMPRESSOR AND 5 YEAR PARTS WARRANTY.

NOTES:1. PROVIDE FACTORY DISCONNECT.2. PROVIDE FAN SPEED CONTROLLER FOR FAN BALANCING.3. PROVIDE FACTORY WHITE ALUMINUM GRILLE.4. PROVIDE FACTORY ROOF CAP.5. PROVIDE INTEGRAL GRAVITY BACKDRAFT DAMPER.6. PROVIDE TIME DELAY SWITCH.7. PROVDE GEARLESS DIRECT DRIVE MOTOR.8. PROVIDE WIRED WALL CONTROLLER.9. PROVIDE MOTORIZED DAMPER ON DISCHARGE OF FAN.

NOTES:1. PROVIDE FACTORY 14" HIGH ROOF CURB.2. PROVIDE BIRDSCREEN.3. PROVIDE BAROMETRIC DAMPER SET TO OPEN AT +0.05 IN. WG. BUILDING PRESSURE.

2

2 04/07/2015 V.E. ITEMS

PR

OJEC

T #14 066



F-1008

1

ISSUE:

CHECKED:

SCALE:

© 2014 Stantec

Stantec Project:

SHEET TITLE:

2 3 4 5 6 7 8 9 10

1 2 3 4 5 6 7 8 9 10

H

G

F

E

D

C

B

A

H

G

F

E

D

C

B

A




P 210.223.9588F 210.223.9589

11/7/2014

SAN ANTONIO, TEXAS


DISTRICT

C:\U

sers

\kel

ley\

Doc

umen

ts\1

4066

- M

echa

nica

l Cen

tral -

CF1

4_ke

lley.

rvt

4/7/

2015

3:3

0:47

PM

DTA


MECHANICAL -SCHEDULES

M302R13-08

11-07-2014

VARIABLE REFRIGERANT FAN COIL SCHEDULE

MARK SYSTEM TYPE SERVICE

ELECTRICAL FAN COOLING HEATING AUXILIARY ELECTRIC HEAT

WEIGHT(LBS) MFG MODEL

BRANCH SELECTOR

NOTESVOLTS PH. MCA (A) MOCP (A)MAX FLOW

(CFM)MIN FLOW

(CFM)OUTSIDEAIR (CFM)

SOUNDRATING(DBA)

NOM. CAP.(BTU/HR)

NOM. CAP.(BTU/HR) KW MCA (A) MOCP (A) MARK MODEL VOLTAGE PHASE MCA (A) MOCP (A)

WEIGHT(LBS)

VFC-1 SYSTEM 1 DUCTED CORRIDOR/RESTROOMS 208 1 2.9 15 1130 810 N/A 43 36000 40000 N/A N/A N/A 110 DAIKIN FXMQ36PAVJU BS-1 BSVQ36PVJU 208 1 0.1 15 30 1,2,5,6VFC-3 SYSTEM 1 DUCTED CHORAL HALL 208 1 10.1 15 2540 2190 800 49 96000 108000 N/A N/A N/A 300 DAIKIN FXMQ96MVJU BS-3 BSVQ96PVJU 208 1 0.1 15 30 1,2,5

VFC-2A SYSTEM 2 DUCTED BAND HALL 208 1 9.0 15 2050 1780 1235 49 72000 81000 N/A N/A N/A 300 DAIKIN FXMQ72MVJU BS-2A BSVQ96PVJU 208 1 0.1 15 30 1,2,5VFC-2B SYSTEM 2 DUCTED BAND HALL 208 1 10.1 15 2540 2190 435 49 96000 108000 N/A N/A N/A 300 DAIKIN FXMQ96MVJU BS-2B BSVQ96PVJU 208 1 0.1 15 30 1,2,5VFC-4 SYSTEM 2 DUCTED UNIFORM STORAGE/ENSEMBLE 208 1 0.6 15 450 390 275 34 12000 13500 N/A N/A N/A 70 DAIKIN FXMQ12PAVJU BS-4 BSVQ36PVJU 208 1 0.1 15 30 1,2,5VFC-5 SYSTEM 2 DUCTED LIBRARY/OFFICE/CHORAL PRACTICE 208 1 1.5 15 635 530 115 41 18000 20000 N/A N/A N/A 80 DAIKIN FXMQ18PAVJU BS-5 BSVQ36PVJU 208 1 0.1 15 30 1,2,5VFC-6 SYSTEM 2 DUCTED LIBRARY/OFFICE/BAND PRACTICE 208 1 1.5 15 635 530 115 41 18000 20000 N/A N/A N/A 80 DAIKIN FXMQ18PAVJU BS-6 BSVQ36PVJU 208 1 0.1 15 30 1,2,5VOA-1 SYSTEM 3 DUCTED OUTSIDE AIR 208 1 3.8 15 1235 N/A 1235 47 96000 59000 7 42.06 45 270 DAIKIN FXMQ96MFVJU N/A N/A N/A N/A N/A N/A N/A 1,2,3,4,5VOA-2 SYSTEM 3 DUCTED OUTSIDE AIR 208 1 3.8 15 1235 N/A 1235 47 96000 59000 7 42.06 45 270 DAIKIN FXMQ96MFVJU N/A N/A N/A N/A N/A N/A N/A 1,2,3,4,5VOA-3 SYSTEM 3 DUCTED OUTSIDE AIR 208 1 1.9 15 635 N/A 635 42 48000 30000 5 30.05 35 200 DAIKIN FXMQ48MFVJU N/A N/A N/A N/A N/A N/A N/A 1,2,3,4,5

NOTES:1. PROVIDE FIELD OR FACTORY MOUNTED CONDENSATE PUMP ON ALL INDOOR UNITS CAPABLE OF MINIMUM 24" LIFT.2. PROVIDE DAIKIN BRC1E72 NAVIGATION STAT, OR EQUAL APPROVED BY ENGINEER FOR ALL FCU WITH AUTO CHANGE OVER AND DUAL HEAT AND COOL SETPOINTS, UNLESS NOTED OTHERWISE ON DRAWINGS.3. VRV SUPPLIER TO INCLUDE SCR STRIP HEAT FOR SUPPLY SIDE OF OA UNITS.4. SCR STRIP HEAT TO BE FIELD MOUNTED IN DUCTWORK & REQUIRES SEPERATE POWER SUPPLY FROM VRV INDOOR UNIT.5. PROVIDE BACNET/IP GATEWAY TO CONNECT VRV SYSTEM TO BAS.6. OUTSIDE AIR IS DUCTED DIRECTLY INTO SPACE FROM VOA-3, VOLUME EQUAL TO 360 CFM. OUTSIDE AIR IS PROVIDED TO SPACE, IT JUST IS NOT PROVIDED THROUGH UNIT VFC-1.

2

2 04/07/2015 V.E. ITEMS

JJ

JJ

J

J

J

IV2

OSOS

OS

OS

OS

OS OS

OSOS

IV1

A B C F G H J K

1

2

3

4

5

6

10

11

12

14

15

16

17

D E

1819

20

21

22

7

8

9

13

B1 B1

B1 B1

W1EW1E

D1

D1

D1W3

D1

D1E

D1

D1 D1

D1E D1D1E

B1 B1

B1B1 A1 A1

A1EA1A1 A1E

D1W3

D1

D1E

D1

D1 D1

D1E D1D1E

B1

B1

B1

B1E

A1A1

A1 A1

B1

B1E

B1

B1

B1E

B1

P1E

P1

P1

P1E

P1

P1E

P1

P1

P1E

P1

P1

P1E

W2E

W2E

W2E

W1E

C1E C1E

W2E

B1 B1

B1B1

B1B1

HA-31

HA-33

HA-35

HA-37

HA-39

HA-41

HA-2

(SC)HA-4

(SC)HA-4

(SC)HA-4

(SC)HA-4

S1

S1

S1

S1

S1

S1

S1S1S1S1 S1

S1

S1

K

K

(TYP)1

(TYP)2

33

LV

LV

3

K

K

LA-18

3

4

4

4

4

LV4

LA-77

LA-79

F1 F1

F1

F1

F1

F1

F1 F1

(SC)HA-8

(SC)HA-8

LA-14,16

LA-10,12

LA-28,30

T1

CORRIDOR100

LIBRARY/STORAGE110

C PRACTICE118

IDF114

CHORAL HALL115

RISER123

ENSEMBLE112

STAFF TLT113

HALL116

STORAGE121

MEN TLT103

CUST102

UNIFORM STOR111

OFFICE120

WOMEN TLT104

ELEC101

LIBRARY119

B PRACTICE109

B PRACTICE108

OFFICE106

BAND HALL105

LA-32

LA-34

(TOP)

(BOTTOM)

(2)

5

X1

X1

X1

X1

6

6

66

HA-16

5

5

5

3

3

3

3

3

3

C PRACTICE117

HA

X1

33

33

33

7

1

W4

W4

W4

HA-20

8

(TYP)9

10

10

W2

W2

W2

W2

W2E

LCP

W1E

3LV

433

(TYP)2

/2 E602

/2 E602

/2 E602 5

5 /2 E602

/2 E602

3 /2 E602

X1 1

X1

1

A2E A2 A2 A2 A2E

A2A2A2EA2A2

A2E A2 A2 A2 A2E

A2 A2E A2 A2E A2

A2A2A2A2A2

A2E A2 A2E A2 A2E

A2A2A2A2A2

A2 A2E A2 A2E A2

A2A2A2A2A2

A2E A2 A2E A2 A2E

a

a

a

a

a

a

a b

b

b

b

b

b

b c

c

c

c

c

c

c

D,aD,bD,c

,a

,b,c

a a

a a

a a

b

b

b

c

c

c

,a,b,c

D,aD,bD,c

a

a

a

a

a

a

a

a

a

a

a

a

a

a

a

a

a

2

2

2

PR

OJE

CT

#14

06

6

7700 Torino St, Suite 101

San Antonio, TX 78229Telephone: 210.614.1110

© 2014 Alderson & Associates, Inc.

F-1008

N

1

ISSUE:

CHECKED:

SCALE:

© 2014 Stantec

Stantec Project:

SHEET TITLE:

KEY PLAN (NTS)

2 3 4 5 6 7 8 9 10

1 2 3 4 5 6 7 8 9 10

H

G

F

E

D

C

B

A

H

G

F

E

D

C

B

A




P 210.223.9588F 210.223.9589

11/7/2014

SAN ANTONIO, TEXAS


DISTRICT

F:\

14066 -

Ele

ctr

ical C

en

tral -

CF

14_Jam

es.r

vt

4/7

/2015 3

:47:5

2 P

M

1/8" = 1'-0"

DTA


LIGHTING FLOOR PLAN -LEVEL 1

E1111307

11-07-2014

GENERAL LIGHTING NOTES (THIS SHEET ONLY)

1. ALL WORK TO BE COMPLETED IN ACCORDANCE WITH THE NATIONAL ELECTRICCODE AND THE AUTHORITY HAVING JURISDICTION.

2. COORDINATE ALL WORK WITH OTHER TRADES AS REQUIRED.

3. ALL NEW LIGHT SWITCHES TO BE MOUNTED AT 44" ABOVE FINISHED FLOOR.

4. SINGLE HOMERUNS ARE SHOWN FOR CIRCUIT IDENTIFICATION ONLY.CONTRACTOR MAY GROUP A MAXIMUM OF THREE (3) BRANCH CIRCUITS PERHOMERUN RACEWAY, UNLESS NOTED OTHERWISE. TYPICAL FOR ALLELECTRICAL FLOOR PLANS.

5. MULTI-WIRED (SHARED NEUTRAL) BRANCH CIRCUITS SHALL NOT BEINSTALLED. ALL 120- & 277- VOLT BRANCH CIRCUITS SHALL HAVE ADEDICATED INDIVIDUAL NEUTRAL CONDUCTOR.

6. ALL HOMERUNS AND RUNS BETWEEN JUNCTION BOXES TO BE A MINIMUM OF3/4" CONDUIT WITH #10 WIRE. NO MORE THAN THREE (3) CIRCUITS PERHOMERUN. ALL WIRING SHALL HAVE A SEPARATE INSULATED GREENGOUNDING CONDUCTOR. #10 CONDUCTORS SHALL EXTEND FROM OCPD TO AJUNCTION BOX IN THE AREA OF THE OUTLETS OR UTILIZATION EQUIPMENT. DROPS TO INDIVIDUAL 20A SWITCHES AND RECEPTACLES MAY BE #12 THHNCOPPER.

7. ALL ITEMS AND FIXTURES SHALL BE U.L. LISTED.

8. EXPOSED GRID CEILINGS: FLOURESCENT FIXTURES SHALL BE SUPPORTEDINDEPENDENTLY OF THE CEILING GRID BY A MINIMUM OF FOUR #9GALVANIZED WIRES ATTACHED TO THE FIXTURE AT EACH CORNER.

9. VOLTAGE DROP IN BRANCH CIRCUITS SHALL NOT EXCEED 3%.

10. ELECTRICAL CONTRACTOR SHALL COORDINATE THE INSTALLATION OFELECTRICAL WORK ABOVE THE CEILING TO PROVIDE THE GREATEST POSSIBLECLEARANCE FOR PLUMBING AND MECHANICAL EQUIPMENT BOTH CURRENTAND FUTURE. CONDUITS SHALL BE KEPT TIGHT TO STRUCTURE OR ROUTEDTHROUGH STRUCTURAL TRUSSES WHEREVER POSSIBLE.

11. PROVIDE U.L. LISTED FIRE STOP SYSTEMS AT ALL PENETRATIONS THROUGHWALLS.

12. ALL JUNCTION BOX COVERS WILL BE MARKED USING "SHARPIE" OR"MARKSALOT" INDICATING THE PANEL AND CIRCUIT #'S CONTAINED WITHIN THEJUNCTION BOX.

13. ALL SWITCH COVER PLATES WILL BE MARKED TO INDICATE PANEL ANDCIRCUIT #'S USING APPROVED LABEL MAKER.

14. THERE SHALL BE NO JUNCTION BOXES LOCATED ABOVE A HARD CEILING. ALLCONNECTIONS TO FIXTURES IN A HARD CEILING WILL COME FROM A JUNCTIONBOX LOCATED IN AN ACCESSIBLE AREA OUTSIDE OF THE ROOM.

15. FIXTURES SHALL NOT BE DAISY CHAINED TOGETHER. EACH FIXTURE SHALLHAVE ONLY ONE FLEXIBLE CONDUIT CONNECTION FROM A JUNCTION BOXLOCATED WITHIN 6'.

16. FLEXIBLE CONDUIT (FMC) CAN BE USED ONLY FOR FINAL CONNECTIONS TOLIGHT FIXTURES. RUNS LONGER THAN 6' WILL NOT BE ALLOWED.

17. LIQUIDTIGHT FLEXIBLE CONDUIT (LFMC) SHALL BE USED FOR CONNECTIONS TOEQUIPMENT AND MOTORS.

KEYED NOTES (APPLIES TO THIS SHEET ONLY)

1 PROVIDE INVERTER WITH INTEGRAL TEST SWITCH IN ACCESSIBLE SPACE FOREMERGENCY LIGHT FIXTURES INDICATED ON PLAN. REFER TO LIGHTINGFIXTURE SCHEDULE FOR ADDITIONAL INFORMATION.

2 ROUTE ALL "P1E/P2E" FIXTURE THRU INVERTER INDICATED ON PLAN.

3 ROUTE EXTERIOR LIGHTING CIRCUIT THRU LIGHTING CONTROL PANEL VIA #8AWG WIRE MINIMUM. REFER TO DETAIL INDICATED ON PLAN.

4 PROVIDE LOW VOLTAGE OVERRIDE SWITCH PER IECC. SWITCH SHALLINTERFACE WITH LIGHTING CONTROL PANEL TO ALL LOCAL LIGHTINGCIRCUIT(S) REMAIN/TURN ON FOR 2 HOURS.

5 ROUTE INTERIOR LIGHTING CIRCUIT THRU LIGHTING CONTROL PANEL.CONNECT EMERGENCY EXIT AND/OR EGRESS LIGHT FIXTURE TO NORMALPOWER LIGHTING CIRCUIT SERVING THE SAME AREA AND CONNECTEMERGENCY BATTERY CONDUCTOR AHEAD OF LIGHTING CONTROL PANEL ANDANY SWITCHES OR PHOTOCELLS. EMERGENCY EGRESS LIGHTING SHALL BESWITCHED WITH NORMAL LIGHTING UNLESS NOTED OTHERWISE WITH"NL"(NIGHT LIGHT). REFER TO INTERIOR LIGHTING CONTROL DETAIL FORADDITIONAL INFORMATION.

7 ROUTE LIGHT SWITCH CIRCUIT DOWN TO LIGHT FIXTURE IN CRAWL SPACE.

8 PROVIDE LIGHT SWITCH TO CONTROL FLOOD LIGHTS MOUNT ON ROOF FORFIELD LIGHTING.

9 PROVIDE FLOOD LIGHTS MOUNTED ON ROOF FOR FIELD LIGHTING.

10 ROUTE LIGHT SWITCH CIRCUIT UP TO LIGHT FIXTURE IN MEZZANINE SPACE.

SCALE: 1/8" = 1'-0"1

LIGHTING AND CEILING FAN PLAN - LEVEL 1

1 12/11/2014 Addendum #1

2 04/07/2015 V.E. Items

J

J

J

J J

J J

J

J

A B C F G H J K

1

2

3

4

5

6

10

11

12

14

15

16

17

D E

1819

20

21

22

7

8

9

13

TLALA

HA

GFCI

GFCI/AC

1

GFCI

2

3

3

EWH-1

FACP

LA-1

LA-3

LA-5

LA-7

LA-9

LA-11

LA-13LA-15

LA-17

LA-19

LA-21

LA-23

LA-25

LA-27

LA-55

LA-57

LA-61LA-63

LA-65

LA-67

LA-73

LA-29,31

LA-33

LA-35

LA-37

LA-39

LA-20

LA-41

WP/GFCI/LOCKABLE

WP/GFCI/LOCKABLE

WP/GFCI/LOCKABLE

LA-81

REFER TO LIGHTINGPLAN FOR FAN POWER



LBLA-36

CORRIDOR100

LIBRARY/STORAGE110

C PRACTICE118

IDF114

CHORAL HALL115

RISER123

ENSEMBLE112

STAFF TLT113

HALL116

STORAGE121

MEN TLT103

CUST102

UNIFORM STOR111

OFFICE120

WOMEN TLT104

ELEC101

LIBRARY119

B PRACTICE109

B PRACTICE108

OFFICE106

BAND HALL105

EWH-2

72"LA-43

C PRACTICE117

GFCI/ACAC

LA-59

4

LCP

LA-44

LA-45

LA-46

56

AC AC

78

LA-47

LA-2

1

1

2

2

PR

OJE

CT

#14

06

6




F-1008

N

1

ISSUE:

CHECKED:

SCALE:

© 2014 Stantec

Stantec Project:

SHEET TITLE:

KEY PLAN (NTS)

2 3 4 5 6 7 8 9 10

1 2 3 4 5 6 7 8 9 10

H

G

F

E

D

C

B

A

H

G

F

E

D

C

B

A




P 210.223.9588F 210.223.9589

11/7/2014

SAN ANTONIO, TEXAS


DISTRICT

F:\

14066 -

Ele

ctr

ical C

en

tral -

CF

14_Jam

es.r

vt

4/7

/2015 3

:54:2

4 P

M

1/8" = 1'-0"

DTA


POWER FLOOR PLAN -LEVEL 1

E2111307

11-07-2014

KEYED NOTES (APPLIES TO THIS SHEET ONLY)

1 PROVIDE GFCI RECEPTACLE FOR DRINKING FOUNTAIN. RECEPTACLE SHALL BELOCATED INSIDE DRINKING FOUNTAIN ENCLOSURE. REFER TO ARCHITECTURALAND PLUMBING SHEETS FOR ADDITIONAL INFORMATION

2 PROVIDE COMPLETE CONNECTION TO SECURITY PANEL AND POWER FROMCIRCUIT INDICATED ON PLANS. REFER TO SPECIFICATIONS FOR ADDITIONALINFORMATION AND REQUIREMENTS. VERIFY EXACT LOCATION OF SECURITYPANEL ON TECHNOLOGY SHEET.

3 PROVIDE POWER TO CEILING MOUNTED PROJECTOR. VERIFY EXACTLOCATION/HEIGHT AND REQUIREMENTS WITH TECHNOLOGY SHEETS ANDARCHITECT PRIOR TO ROUGHIN.

4 PROVIDE POWER TO ELECTRONIC FLUSH VALVE TOILETS VIA LOW VOLTAGETRANSFORMER AS REQUIRED. PROVIDE TRANSFORMER IN ACCESSIBLECEILING SPACE. PROVIDE ACCESS DOOR IN GYPSUM WALL/CEILING IFADJACENT SPACE DOES NOT HAVE ACCESSIBLE CEILING. REFER TO PLAN FORLOCATION.

5 PROVIDE COMPLETE CONNECTION TO HVAC CONTROL PANEL.

6 PROVIDE SCHNEIDER ELECTRIC LIGHTING CONTROL PANEL. PROVIDEENCLOSURE TO HOUSE SMARTSTRUCTURE AUTOMATION SERVER AND OTHERREQUIRED MODULES. REFER TO INTERIOR AND EXTERIOR LIGHTING CONTROLDETAILS FOR ADDITIONAL INFORMATION.

7 PROVIDE NEMA L6-20R RECEPTACLE MOUNTED TO UNISTRUT ABOVE LADDERRACK. REFER TO TECHNOLOGY SHEETS FOR ADDITIONAL INFORMATION.

8 PROVIDE NEMA 5-20R RECEPTACLE MOUNTED TO UNISTRUT ABOVE LADDERRACK. REFER TO TECHNOLOGY SHEETS FOR ADDITIONAL INFORMATION.

GENERAL POWER NOTES (THIS SHEET ONLY)

1. ALL WORK TO BE COMPLETED IN ACCORDANCE WITH THE NATIONALELECTRIC CODE AND AUTHORITIES HAVING JURISDICTION.

2. ALL WALL MOUNTED RECEPTACLES TO BE LOCATED 18" A.F.F. TO BOTTOMOF BOX UNLESS OTHERWISE NOTED.

3. ALL OUTLETS SHOWN AS "AC" (ABOVE COUNTER) ARE TO BE INSTALLED 3"ABOVE COUNTER OR BACK SPLASH TO BOTTOM OF BOX.

4. SINGLE HOME RUNS ARE SHOWN FOR CIRCUIT IDENTIFICATION ONLY.CONTRACTOR MAY GROUP A MAXIMUM OF THREE (3) BRANCH CIRCUITSPER HOMERUN RACEWAY, UNLESS NOTED OTHERWISE. TYPICAL FOR ALLELECTRICAL FLOOR PLANS.

5. MULTI-WIRED (SHARED NEUTRAL) BRANCH CIRCUITS SHALL NOT BEINSTALLED. ALL 120- & 277- VOLT BRANCH CIRCUITS SHALL HAVE ADEDICATED INDIVIDUAL NEUTRAL CONDUCTOR.

6. ALL HOMERUNS AND RUNS BETWEEN JUNCTION BOXES TO BE A MINIMUMOF 3/4" CONDUIT WITH #10 WIRE. NO MORE THAN THREE (3) CIRCUITS PERHOMERUN. ALL WIRING SHALL HAVE A SEPARATE INSULATED GREENGROUNDING CONDUCTOR. #10 CONDUCTORS SHALL EXTEND FROM OCPDTO A JUNCTION BOX IN THE AREA OF THE OUTLETS OR UTILIZATIONEQUIPMENT. DROPS TO INDIVIDUAL 20A SWITCHES AND RECEPTACLES MAYBE #12 THHN COPPER.

7. COORDINATE LOCATIONS OF ALL POWER AND DATA OUTLETS WITHFURNITURE AND CASEWORK FOOTPRINTS PRIOR TO COMMENCING ANY DEVICE ROUGH-IN TO AVOID CONFLICTS OR LOCATING DEVICES BEHIND ORUNDER EQUIPMENT THAT WOULD RENDER THE DEVICE USELESS ORINACCESSIBLE.

8. PROVIDE U.L. LISTED FIRE STOP SYSTEMS AT ALL PENETRATIONSTHROUGH WALLS.

9. ELECTRICAL CONTRACTOR SHALL COORDINATE THE INSTALLATION OFELECTRICAL WORK ABOVE THE CEILING TO PROVIDE THE GREATESTPOSSIBLE CLEARANCE FOR PLUMBING AND MECHANICAL EQUIPMENTBOTH CURRENT AND FUTURE. CONDUITS SHALL BE KEPT TIGHT TOSTRUCTURE OR ROUTED THROUGH STRUCTURAL TRUSSES WHEREVERPOSSIBLE.

10. ALL SWITCHES AND RECEPTACLES SHALL BE U.L. LISTED AND SHALL BESPECIFICATION GRADE.

11. ALL FEEDER AND BRANCH CIRCUIT WIRING SHALL BE COPPER.

12. ALL JUNCTION BOX COVERS WILL BE MARKED USING "SHARPIE" OR"MARKSALOT" INDICATING THE PANEL AND CIRCUIT #'S CONTAINED WITHINTHE JUNCTION BOX.

13. ALL SWITCH AND RECEPTACLE COVER PLATES WILL BE MARKED TOINDICATE PANEL AND CIRCUIT #'S USING APPROVED LABEL MAKER.

14. IN ALL CASES VOLTAGE DROP TO LAST OUTLET MUST NOT EXCEED 3%.

15. FLEXIBLE METAL CONDUIT (FMC) CAN BE USED ONLY FOR FINALCONNECTIONS TO LIGHT FIXTURES. RUNS LONGER THAN 6' WILL NOT BEALLOWED.

16. LIQUIDTIGHT FLEXIBLE CONDUIT (LFMC) SHALL BE USED FORCONNECTIONS TO EQUIPMENT AND MOTORS.

17. ALL DATA CONDUITS, SLEEVES AND STUBS SHALL BE TERMINATED WITHPLASTIC BUSHINGS.

18. COORDINATE LOCATION OF ALL DISCONNECT SWITCHES TO ENSURE THATALL NEC MINIMUM WORKING CLEARANCES ARE MAINTAINED.

19. REFER TO BRANCH CIRCUIT SCHEDULES FOR CONDUCTOR SIZING.CIRCUITS FEEDING COMPUTERS SHALL CONSIST OF THE FOLLOWING: (1) CURRENT CARRYING CONDUCTOR (1) NEUTRAL CONDUCTOR (1) INSULATED GND. CONDUCTOR

(1) INSULATED ISOLATED GND. CONDUCTOR

20. PROVIDE CEILING ACCESS DOORS TO GAIN ACCESS TO EQUIPMENT ABOVEHARD CEILINGS.

SCALE: 1/8" = 1'-0"1

POWER FLOOR PLAN - LEVEL 1

1

1 12/11/2014 Addendum #1

2 04/07/2015 V.E. Items

PR

OJE

CT

#14

06

6




F-1008

1

ISSUE:

CHECKED:

SCALE:

© 2014 Stantec

Stantec Project:

SHEET TITLE:

2 3 4 5 6 7 8 9 10

1 2 3 4 5 6 7 8 9 10

H

G

F

E

D

C

B

A

H

G

F

E

D

C

B

A




P 210.223.9588F 210.223.9589

11/7/2014

SAN ANTONIO, TEXAS


DISTRICT

F:\

14066 -

Ele

ctr

ical C

en

tral -

CF

14_Jam

es.r

vt

4/7

/2015 3

:44:5

7 P

M

DTA


ELECTRICAL SCHEDULES

E5011307

11-07-2014

Lighting Fixture Schedule

KS Manufacturer Catalog Number Description Lamp Qty Lamp Type Ballast Qty Ballast Type Mounting Voltage Wattage

A1 LITHONIA 2VT8 3 32 ADP MVOLT 1/3 GEB10PS LP841 (DGA24FOR GYPSUM CEILING-REFER RCP)

2X4 VOLUMETRIC FLUORESCENT TROFFER, 3-LAMP PROGRAM START BALLAST.CONTRACTOR TO VERIFY EXACT MOUNTING REQUIREMENTS PERARCHITECTURAL RCP PRIOR TO ORDERING.

3 32W T8 4100K 1 ELECTRONIC RECESSED 277 V 93 VA

A1E LITHONIA 2VT8 3 32 ADP MVOLT 1/3 GEB10PS LP841 EL14(DGA24 FOR GYPSUM CEILING-REFER RCP)

SAME AS FIXTURE ABOVE EXCEPT WITH 90 MINUTE 1400 LUMEN MINIMUMEMERGENCY BATTERY BACKUP.


A2 LITHONIA 2VTL4 72L ADP EZ1 LP840 2x4 VOLUMETRIC LED TROFFER, 0-10 VOLT DIMMING DOWN TO 1%. CONTRACTORTO VERIFY EXACT MOUNTING REQUIREMENTS PER ARCHITECTURAL RCP PRIORTO ORDERING.

1 LED 1 LED DRIVER RECESSED 277 V 70 VA

A2E LITHONIA 2VTL4 72L ADP EZ1 LP840 EL14L SAME AS FIXTURE ABOVE EXCEPT WITH 90 MINUTE 1400 LUMEN MINIMUMEMERGENCY BATTERY BACKUP.

1 LED 1 LED DRIVER RECESSED 277 V 70 VA

B1 LITHONIA 2SP8 G 332 A12125 MVOLT GEB10PS LP741 (DGA24FOR GYPSUM CEILING-REFER RCP)

2x4 LENSED FLUORESCENT TROFFER, 3-LAMP PROGRAM START BALLAST.CONTRACTOR TO VERIFY EXACT MOUNTING REQUIREMENTS PERARCHITECTURAL RCP PRIOR TO ORDERING.


B1E LITHONIA 2SP8 G 332 A12125 MVOLT GEB10PS LP741 EL14(DGA24 FOR GYPSUM CEILING-REFER RCP)

SAME AS FIXTURE ABOVE EXCEPT WITH 90 MINUTE 1400 LUMEN MINIMUMEMERGENCY BATTERY BACKUP.


C1 LITHONIA C 2 32 MVOLT GEB10PS WGCUN NST (HC36 TALLCEILINGS)

GENERAL PURPOSE STRIP FIXTURE, 4' FOOT IN LENGTH WITH WIRE GUARD.CONTRACTOR TO VERIFY EXACT MOUNTING REQUIREMENTS PERARCHITECTURAL RCP AND ARCHITECT PRIOR TO ORDERING.

2 32W T8 4100K 1 ELECTRONIC CHAIN / SURFACE 277 V 62 VA

C1E LITHONIA C 2 32 MVOLT GEB10PS WGCUN NST EL SAME AS ABOVE, EXCEPT WITH EMERGENCY BATTERY PACK 2 32W T8 4100K 1 ELECTRONIC CHAIN / SURFACE 277 V 62 VA

D1 GOTHAM AF 1/42TRT 6AR MVOLT 6" DIA. RECESSED DOWNLIGHT. VERIFY TRIM FINISH WITH ARCHITECT PRIOR TOORDERING.

1 42W TRT 4100K 1 ELECTRONIC RECESSED 277 V 46 VA

D1E GOTHAM AF 1/42TRT 6AR MVOLT ELHL SAME AS ABOVE, EXCEPT WITH EMERGENCY 90 MINUTE HIGH LUMEN BATTERYPACK AND INTERGRAL TEST SWITCH.

1 42W TRT 4100K 1 ELECTRONIC RECESSED 277 V 46 VA

F1 LITHONIA FEM8 LED 9L IMAFL 277 DPMB 8' ENCLOSED AND GASKETED LINEAR LED. VERIFY MOUNTING HEIGHT WITHARCHITECT.

1 LED 1 LED DRIVER SUSPENDED 277 V 122 VA

IV1 LITHONIA EAC ISSM 125 RGM REGRESSED SURFACE MOUNT 125W EMERGENCY BATTERY BACKUP INVERTERWITH INTERGRAL TEST SWITCH. LOCATED OWNER ACCESSIBLE AREA FORFUTURE TESTING REQUIREMENTS.

IV2 LITHONIA EAC ISSM 375 SM WALL MOUNT 375W EMERGENCY BATTERY BACKUP INVERTER WITH INTERGRALTEST SWITCH. LOCATED OWNER ACCESSIBLE AREA FOR FUTURE TESTINGREQUIREMENTS.

P1 VISA LIGHTING CP5548 STM LCW5000DEDUCT ALT #2 - CP5548 STM 2FS54

4' LONG 12" SQUARE TUBE DIFFUSER LED PENDANT WITH STEM MOUNT TOCEILING/DECK.

1 LED 1 LED DRIVER SUSPENDED 277 V 70 VA

P1E VISA LIGHTING CP5548 STM LCW5000DEDUCT ALT #2 - CP5548 STM 2FS54

SAME AS ABOVE, EXCEPT WITH ROUTED THRU 375W INVTERTER "IV1". 1 LED 1 LED DRIVER SUSPENDED 277 V 70 VA

S1 120 V 11 VA

T1 ELITE LED TAPE: LB102-30F-65K, TRANSFORMER:EUM-LED-DRIVER-65W-24, MINI CHANNEL:LB100-BC-AL

17' LED TAPE LIGHT WITH ASSOCIATED TRANSFORMER, MINI CHANNEL,CONCEAL/MOUNT TRANSFORMER IN DISPLAY CASE. LED TAPE LIGHT MOUNTED INBOTH TOP AND BOTTOM COVES WITHIN DISPLAY CASE. SEE ARCHITECTURALSHEETS FOR MORE INFORMATION.

1 LED 6500K 1 LED DRIVER COVE 120 V

W1 LITHONIA WL4 D43 LP840 NX WALL BRACKET OR SURFACE MOUNT 4' LINEAR LED. 1 LED 1 LED DRIVER SURFACE/WALL 277 V 43 VA

W1E LITHONIA WL4 D43 LP840 NX EL14L WALL BRACKET OR SURFACE MOUNT 4' LINEAR LED WITH 90 MINUTE 1400 LUMENMINIMUM INTEGRAL EMERGENCY BATTERY BACKUP.

1 LED 1 LED DRIVER SURFACE/WALL 277 V 43 VA

W2 LITHONIA WSQLED 2 10A700/40K SR4 277 ELCW EXTERIOR WALL MOUNTED FULL CUT OFF LED FIXTURE, 3,851 LUMENS. VERIFYEXACT HEIGHT AND FINISH WITH ARCHITECT.

2 LED 1 LED DRIVER WALL 277 V 47 VA

W2E LITHONIA WSQLED 1 10A700/40K SR4 277 ELCW EXTERIOR WALL MOUNTED EMERGENCY FULL CUT OFF LED FIXTURE. VERIFYEXACT HEIGHT AND FINISH WITH ARCHITECT PRIOR TO ORDER AND ROUGHIN.

1 LED 1 LED DRIVER WALL 277 V 24 VA

W3 MARK LIGHTING S4LF 5FT GB H 40 AD 277 HT ABOVE SINK 5' LINEAR RECESSED SLOT FIXTURE. 1 LED 1 ELECTRONIC WALL 277 V 60 VA

W4 LITHONIA TFA 400M TA 277 FLOOD LIGHT MOUNTED TO ROOF STRUCTURE POINTING TOWARDPERFORMANCE AREA ON FIELD.

1 400W MH 1 PSMH STAND 277 V 461 VA

X1 LITHONIA EDG EL SINGLE/DOUBLE FACE BATTERY BACKUP SIDE LITE LED EXIT SIGN. REFER TOPLANS FOR REQUIRED NUMBER OF FACES, ARROWS AND MOUNTINGREQUIREMENTS(CEILING/WALL). VERIFY FINISH AND LED COLOR(RED/GREEN)WITH ARCHITECT PRIOR TO ORDERING.

1 LED 1 LED DRIVER WALL/CEILING 277 V 11 VA

Electrical Mechanical/Plumbing Equipment Schedule

HVAC UnitDesignation HP LML FLA

SubloadkW MCA MOCP Total kW Voltage Ph

HVAC UnitLocation

HVAC UnitLocation

Disconnect

FeederTag

PanelName

Circuit# Remarks

SpaceName Space #

CU-3 20.6 A 25.0 A 17.1 kW 480 V 3 EXTERIOR 30AF/3P/NF/N1

25

EWH-1 16.7 A 16.7 A 6.0 kW 20.8 A 40.0 A 7.5 kW 208 V 3 CUST 102 60AF/3P/NF/N1

50 LB 24,26,28

EWH-2 4.2 A 4.2 A 1.5 kW 5.2 A 15.0 A 1.9 kW 208 V 3 LIBRARY/STORAGE

110 30AF/3P/NF/N1

25 LB 30,32,34

F-1 15.0 A 0.0 kW 120 V 1 MECHPLATFORM

200 TOGGLE 25/1 N LB 18

F-2 15.0 A 0.0 kW 120 V 1 STAFF TLT 113 TOGGLE 25/1 N LB 41

F-6 15.0 A 0.0 kW 120 V 1 MECHPLATFORM

200 TOGGLE 25/1 N LB 40

MS-1 15.0 A 0.0 kW 208 V 1 IDF 114 30AF/2P/NF/N1

25/1 POWER FROM ASSOCIATED OUTDOOR HVACUNIT.

MS-CU-1 15.0 A 20.0 A 0.0 kW 208 V 1 EXTERIOR 30AF/2P/NF/N1

25/1 LB 5,7

SP-1 1/2 5.4 A 5.4 A 6.8 A 15.0 A 1.1 kW 208 V 1 CRAWL SPACE 30AF/2P/NF/N1

25/1 LA 40,42

VCU-1 20.5 A 25.0 A 17.0 kW 480 V 3 EXTERIOR 30AF/3P/NF/N1

25 HA 13,15,17


25 HA 19,21,23


25 HA 7,9,11

VFC-1 2.9 A 15.0 A 0.6 kW 208 V 1 MECHPLATFORM

200 30AF/2P/NF/N1

25/1 LB 6,8

VFC-2A 9.0 A 15.0 A 1.9 kW 208 V 1 MECHPLATFORM

201 30AF/2P/NF/N1

25/1 LB 2,4

VFC-2B 10.1 A 15.0 A 2.1 kW 208 V 1 MECHPLATFORM

201 30AF/2P/NF/N1

25/1 LB 21,23

VFC-3 10.1 A 15.0 A 2.1 kW 208 V 1 MECHPLATFORM

201 30AF/2P/NF/N1

25/1 LB 17,19

VFC-4 0.6 A 15.0 A 0.1 kW 208 V 1 UNIFORM STOR 111 30AF/2P/NF/N1

25/1 LB 9,11

VFC-5 1.5 A 15.0 A 0.3 kW 208 V 1 STORAGE 121 30AF/2P/NF/N1

25/1 LB 1,3

VFC-6 1.5 A 15.0 A 0.3 kW 208 V 1 LIBRARY/STORAGE

110 30AF/2P/NF/N1

25/1 LB 13,15

VOA-1(COIL) 3.8 A 15.0 A 0.8 kW 208 V 1 ENSEMBLE 112 30AF/2P/NF/N1

25/1 LB 25,27

VOA-1(HEAT) 42.1 A 45.0 A 8.7 kW 208 V 1 ENSEMBLE 112 60AF/2P/NF/N1

50/1 LB 29,31

VOA-2(COIL) 3.8 A 15.0 A 0.8 kW 208 V 1 UNIFORM STOR 111 30AF/2P/NF/N1

25/1 LB 33,35

VOA-2(HEAT) 42.1 A 45.0 A 8.7 kW 208 V 1 UNIFORM STOR 111 60AF/2P/NF/N1

50/1 LB 37,39

VOA-3(COIL) 1.9 A 15.0 A 0.4 kW 208 V 1 UNIFORM STOR 111 30AF/2P/NF/N1

25/1 LB 10,12

VOA-3(HEAT) 30.5 A 35.0 A 6.3 kW 208 V 1 UNIFORM STOR 111 60AF/2P/NF/N1

35/1 LB 14,16

Notes:

Receptacle 15480 VA 82.30% 12740 VA

Power 2580 VA 100.00% 2580 VA

Other 9965 VA 100.00% 9965 VA Total Demand(Amps): 155 A

Lighting 12574 VA 125.00% 15717 VA Total Demand(KVA): 128640 VA

Heating 9375 VA 100.00% 9375 VA Total Conn. Load(KVA): 137612 VA

Cooling 84638 VA 100.00% 84638 VA

Load Classification Connected Load Demand Factor Estimated Demand Panel Totals

Total Amps: 157 A 179 A 162 A

Total Load: 43537 VA 49380 VA 44679 VA

41 Lighting Lighting 20 A 1 2472 0 -- -- -- Space 42



35 Lighting Lightin... 20 A 1 981 0 -- -- -- Space 36



29 Spare -- 20 A 1 0 0 -- -- -- -- 30

27 Spare -- 20 A 1 0 0 -- -- -- -- 28

25 Spare -- 20 A 1 0 0 3 25 A -- Spare 26

23 -- -- -- -- 5626 0 1 20 A -- Spare 24

21 -- -- -- -- 5626 0 1 20 A -- Spare 22

19 HVAC Unit(s) 'CU-2' Cooling 25 A 3 5626 1383 1 20 A Lighting Lighting 20

17 -- -- -- -- 5681 215 1 20 A Lighting Lighting 18


13 HVAC Unit(s) 'CU-1' Cooling 25 A 3 5681 0 1 20 A -- Spare 14

11 -- -- -- -- 5709 0 1 20 A -- Spare 12

9 -- -- -- -- 5709 0 1 20 A -- Spare 10

7 HVAC Unit(s) 'CU-3' Cooling 25 A 3 5709 976 1 20 A Lighting Lighting 8



1 XFMR "TLA" Lightin... 125 A 3 21591 860 1 20 A Lighting Lighting 2

CKT Circuit Description Type Trip Poles A B C Poles Trip Type Circuit Description CKT

Enclosure: NEMA 1 MCB Rating: 400 A

Mounting: SURFACE Wires: 4 Mains Rating: 400 A

Supply From: MSB Phases: 3 Mains Type: MCB

Location: ELEC 101 Volts: 480/277 Wye A.I.C. Rating: 22000 A

Branch Panel: HA

Notes:

Receptacle 15480 VA 82.30% 12740 VA

Power 2580 VA 100.00% 2580 VA

Other 9965 VA 100.00% 9965 VA Total Demand(Amps): 175 A

Lighting 1411 VA 125.00% 1763 VA Total Demand(KVA): 63141 VA


Cooling 33593 VA 100.00% 33593 VA




83 Spare -- 20 A 1 0 0 1 20 A -- Spare 84

81 FIRE ALARM CONTROL PANEL Other 20 A 1 120 0 1 20 A -- Spare 82

79 Practice Room Power Lighting 20 A 1 600 0 1 20 A -- Spare 80

77 Practice Room Power Lighting 20 A 1 600 0 1 20 A -- Spare 78

75 Heat Trace Power 20 A 1 1596 0 1 20 A -- Spare 76

73 Receptacles Recep... 20 A 1 180 0 1 20 A -- Spare 74

71 Spare -- 20 A 1 0 0 1 20 A -- Spare 72

69 Spare -- 20 A 1 0 0 1 20 A -- Spare 70

67 Receptacles - CUST 102 Recep... 20 A 1 180 0 1 20 A -- Spare 68

65 Receptacles Recep... 20 A 1 1080 0 1 20 A -- Spare 66

63 Practice Room Power - B PRACTICE 108 Miscell... 20 A 1 500 0 1 20 A -- Spare 64

61 Practice Room Power Miscell... 20 A 1 500 0 1 20 A -- Spare 62

59 Receptacles - LIBRARY/STORAGE 110 Recep... 20 A 1 1260 0 1 20 A -- Spare 60

57 Receptacles - OFFICE 106 Recep... 20 A 1 1260 0 1 20 A -- Spare 58

55 Projector - BAND HALL 105 Other 20 A 1 500 0 1 20 A -- Spare 56

53 Spare -- 20 A 1 0 0 1 20 A -- Spare 54

51 Spare -- 20 A 1 0 0 1 20 A -- Spare 52

49 Sump Pump Controller Other 20 A 1 1176 1200 1 20 A Other Window Shades 50

47 Receptacles - IDF 114 Recep... 20 A 1 180 600 1 20 A Other Window Shades - CHORAL HALL 115 48

45 FLUSH VALVE TRANSFORMER - CUST 102 Other 20 A 1 500 500 1 20 A Other HVAC CONTROLLER - ELEC 101 46

43 Receptacle for HWRP-1 Recep... 20 A 1 180 120 1 20 A Other - ELEC 101 44

41 Receptacles Recep... 20 A 1 540 562 -- -- -- -- 42

39 Receptacles Recep... 20 A 1 180 562 2 20 A Other Sump Pump 40

37 Receptacles - IDF 114 Recep... 20 A 1 360 984 1 20 A Power Heat Trace 38

35 Receptacles - IDF 114 Recep... 20 A 1 360 700 1 20 A Other Other CORRIDOR 100 36

33 Receptacles - IDF 114 Recep... 20 A 1 360 34 1 20 A Lighting Display Case Lighting 34

31 -- -- -- -- 90 34 1 20 A Lighting Display Case Lighting 32

29 Receptacles Other 20 A 2 90 0 -- -- -- -- 30

27 Receptacles - BAND HALL 105 Recep... 20 A 1 1260 915 2 20 A Other Outdoor Fan 28

25 Receptacles - BAND HALL 105 Recep... 20 A 1 360 10732 -- -- -- -- 26

23 Receptacles - BAND HALL 105 Recep... 20 A 1 1260 14020 -- -- -- -- 24

21 Receptacles - ENSEMBLE 112 Recep... 20 A 1 720 18216 3 150 A Heatin... PANEL "LB" 22

19 Projector - CHORAL HALL 115 Other 20 A 1 500 500 1 20 A Miscell... SECURITY PANEL - IDF 114 20

17 Receptacles - UNIFORM STOR 111 Recep... 20 A 1 720 143 1 20 A Lighting Exterior Step Lighting 18

15 Practice Room Power - C PRACTICE 118 Miscell... 20 A 1 500 0 -- -- -- -- 16

13 Practice Room Power - C PRACTICE 117 Miscell... 20 A 1 500 915 2 20 A Other Outdoor Fan 14

11 Receptacles - CHORAL HALL 115 Recep... 20 A 1 360 0 -- -- -- -- 12

9 Receptacles - CHORAL HALL 115 Recep... 20 A 1 720 915 2 20 A Other Outdoor Fan 10

7 Receptacles - CHORAL HALL 115 Recep... 20 A 1 900 0 1 20 A -- Spare 8

5 Receptacles - LIBRARY 119 Recep... 20 A 1 900 0 1 20 A -- Spare 6

3 Receptacles - OFFICE 120 Recep... 20 A 1 1080 0 1 20 A -- Spare 4

1 Receptacles - STORAGE 121 Recep... 20 A 1 720 360 1 20 A Recep... Receptacles 2




Supply From: TLA Phases: 3 Mains Type: MCB


Branch Panel: LA

Notes:

Total Demand(Amps): 93 A

Total Demand(KVA): 33593 VA


Cooling 33593 VA 100.00% 33593 VA




41 HVAC Unit(s) 'F-2' - STAFF TLT 113 Cooling 15 A 1 0 0 -- -- -- Space 42

39 -- -- -- -- 4374 0 1 15 A Cooling HVAC Unit(s) 'F-6' - MECH PLATFORM 200 40

37 HVAC Unit(s) 'OAU-2(HEAT)' Cooling 45 A 2 4374 175 -- -- -- -- 38

35 -- -- -- -- 395 175 2 15 A Cooling HVAC Unit(s) "BS-X" 36

33 HVAC Unit(s) 'OAU-2(COIL)' Cooling 15 A 2 395 625 -- -- -- -- 34

31 -- -- -- -- 4374 625 -- -- -- -- 32

29 Cooling ENSEMBLE 112 Cooling 20 A 2 4374 625 3 20 A Heating EWH-2 30

27 -- -- -- -- 395 2500 -- -- -- -- 28

25 HVAC Unit(s) 'VOA-1(COIL)' - ENSEMBLE 112 Cooling 15 A 2 395 2500 -- -- -- -- 26

23 -- -- -- -- 1050 2500 3 20 A Heating EWH-1 24

21 HVAC Unit(s) 'FC-2B' Cooling 15 A 2 1050 0 -- -- -- -- 22

19 -- -- -- -- 1050 0 2 15 A -- Spare 20

17 HVAC Unit(s) 'FC-3' Cooling 15 A 2 1050 0 1 15 A Cooling HVAC Unit(s) 'F-1' - MECH PLATFORM 200 18

15 -- -- -- -- 156 3172 -- -- -- -- 16

13 HVAC Unit(s) 'FC-6' - LIBRARY/STORAGE 110 Cooling 15 A 2 156 3172 2 20 A Cooling Cooling UNIFORM STOR 111 14

11 -- -- -- -- 62 198 -- -- -- -- 12

9 HVAC Unit(s) 'FC-4' - UNIFORM STOR 111 Cooling 15 A 2 62 198 2 15 A Cooling HVAC Unit(s) 'OAU-3(COIL)' - UNIFORM STOR 111 10

7 -- -- -- -- 0 302 -- -- -- -- 8

5 HVAC Unit(s) 'MS-CU-1' Cooling 15 A 2 0 302 2 15 A Cooling HVAC Unit(s) 'FC-1' - MECH PLATFORM 200 6

3 -- -- -- -- 156 936 -- -- -- -- 4

1 HVAC Unit(s) 'FC-5' - STORAGE 121 Cooling 15 A 2 156 936 2 15 A Cooling HVAC Unit(s) 'FC-2A' 2




Supply From: LA Phases: 3 Mains Type: MLO


Branch Panel: LB

1

1

2

2

1 12/11/2014 Addendum #1

2 04/07/2015 V.E. Items