position switches - rad-online.com · position switches 4 general information precision single...
TRANSCRIPT
More than safety.
Position Switches
2
Quality, reliability, precision
Quality, reliability and precision are thehallmarks of our corporate philosophy.They represent concepts and valuesto which we feel totally committed. At EUCHNER, quality means that allour employees take personal respon-sibility for the company as a wholeand, in particular, for their own field ofwork. This individual commitment toperfection results in products whichare ideally tailored to the customers’needs and the requirements of themarket. After all: our customers andtheir needs are the focus of all ourefforts. Through efficient and effectiveuse of resources, the promotion ofpersonal initiative and courage in find-ing unusual solutions to the benefit ofour customers, we ensure a high levelof customer satisfaction. We familiar-ize ourselves with their needs, require-ments and products and we learnfrom the experiences of our cus-tomers’ own customers.
EUCHNER – More than safety.
Quality – made by EUCHNER
More than safety.Around the world – the Swabianspecialists in motion sequencecontrol for mechanical and sys-tems engineering.
EUCHNER’s history began in 1940 withthe establishment of an engineeringoffice by Emil Euchner. Since thattime, EUCHNER has been involved inthe design and development of switch-gear for controlling a wide variety ofmotion sequences in mechanical andsystems engineering. In 1953, EmilEuchner founded EUCHNER + Co., amilestone in the company’s history. In1952, he developed the first multiplelimit switch – to this day a symbol ofthe enterprising spirit of this family-owned company.
Automation – Safety – ManMachine
Today, our products range fromelectromechanical and electroniccomponents to complex system solu-tions. With this wide range of productswe can provide the necessary tech-nologies to offer the right solution forspecial requirements – regardless ofwhether these relate to reliable andprecise positioning or to componentsand systems for safety engineering inthe automation sector.EUCHNER products are sold through aworld-wide sales network of compe-tent partners. With our closeness tothe customer and the guarantee ofreliable solutions throughout theglobe, we enjoy the confidence of cus-tomers all over the world.
Emil Euchner, the company’s founder andinventor of the multiple
limit switch, circa 1928.
Automation
Contents
3Technical Status 01-11/04
General information 4
Switching elements 5
Design and technology 6
Single hole fixing limit switches with reed contact 8
Single hole fixing limit switches with snap-action switching element 12
Multiple clamping strip for single hole fixing limit switches EGT 12 / EGM 12 19
Precision single limit switches 20
Design N01 20
Design NB01 23
Design SN01 23
Design N1A 25
Design N10 28
Design N11 29
Position Switches
Round plug connectors 30
LED function display 32
Additional products 32
Accessories
Position Switches
4
General information
Precision single limit switches
EUCHNER precision single limit switches are technically precisecontrol switches which have been developed on the basis ofpractical requirements in close collaboration with machine toolmanufacturers.The use of high-quality materials, the interplay of sophisticatedtechnology and practically oriented design guarantee operationunder even the toughest conditions.EUCHNER precision single limit switches are used for positioningand controlling machines and in industrial installations.The different designs, with a choice of five different types ofplunger, and easy conversion from longitudinal to transverseactuation offer the user a broad range of individual possibleapplications.
Single hole fixing limit switches with reed contact or snap-action switching element
EUCHNER single hole fixing limit switches are technicallysophisticated control switches which have been proving theirreliability, day in and day out, for decades in rough industrialapplications.These mechanically actuated single hole fixing limit switches areIP 67 rated and are entirely maintenance-free.EUCHNER single hole fixing limit switches feature a thread onthe upper part and can thus be inserted or screwed through themounting hole either from the cable end or from the actuatorend. Setting the position of the operating point opposite the partof the machine to be sensed is easy with this thread.The compact overall size and the round type of constructionallow installation directly at the sensing points. This featuredispenses with the complicated levers or linkages associatedwith a high level of design complexity and expense.
Position Switches
5
Switching elements
1) A snap-action switching element has a switching element which opens or closes regardless of its actuation speed.
2) A slow-action switching element has a switching element which opens and closes depending on its actuation speed.
Positively driven position switches.Safety switching elements marked with this symbol are not available as replacement switching elements.
Reed contact
The reed contact comprises two ferromagnetic contacts in aglass bulb. When the reed contact is placed in a magnetic field,the contacts adopt opposite polarities and are closed.For series EGT with reed contact.
Changeover contact with snap-action function
Snap-action switching element 1) with single gap and threeconnections.For series EGT with snap-action switch and series N01, NB01,SN01 with soldered connection.
Snap-action switching element 1) with one NO contact and oneNC contact
With double gap and electrically isolated switching bridge. Thetwo moving contacts are electrically isolated from each other.Switching element with four connections.For series SN01 with soldered connection and series N1A, N10,N11.
Safety switching element with slow-action switching element 2)
With one positively driven NC contact and double gap. Switchingelement with two connections.For use in single hole fixing limit switches with safety function.For series NB01 with safety function and series N1A with safetyfunction.
Safety switching element with snap-action switching element 1)
With one positively driven NC contact and one NO contact. Doublegap and electrically isolated switching bridge. Switching elementwith four connections.For use in single hole fixing limit switches with safety function.For series N1A with safety function.
Magnet
Position Switches
6
Seals
EUCHNER uses the high-quality and proven acrylonitrile-butadienerubber (NBR) for all seals and sealed areas. This material isresistant to oils, greases, fuels, hydraulic fluids and most knowncooling lubricants. Moreover, NBR possesses high mechanicalrigidity over a wide temperature range and so it is perfectlysuitable for the highly stressed diaphragm seal, which separa-tes the plunger compartment and the interior of the switch.The material of the diaphragm seal is a key criterion for thequality, mechanical life and precision of the EUCHNER precisionmultiple limit switches. The same material is used for the coverseal and the cable entry.
Exterior diaphragm
To provide protection against resinous cooling lubricants andagainst the penetration of very small particles, e. g. saw dust,graphite and glass dust, a series with an exterior diaphragm isavailable.The exterior diaphragm provides additional sealing of the plungeroutside the housing.The plunger guides in the housing are thus reliably protectedfrom the penetration of the cooling lubricant. Plunger sticking isprevented and the replacement of the switch or plunger isunnecessary. For technical data on this series see page 27.
Design
The die-cast aluminum housings for the EUCHNER precision singlelimit switches have been proven in even the harshest conditionswith their high strength and resistance to corrosion.They do not require a protective paint finish, but can be paintedat any time without prior treatment.Depending on the design, the hardened plungers made ofstainless steel run precisely in either the anodic oxidized guidebore in the housing or in a sintered bronze sleeve.These maintenance-free sliding elements make a key contributionto the reliability and correct operation of the switches. Evenbeyond the guaranteed mechanical life.
Precision single limit switches
Plunger
Cable entry
Switchingelement
LED display
Seals madeof NBR
Position Switches
7
Cable connection
EUCHNER position switches are tested to degree of protectionIP 67 in accordance with IEC 60529. In order to obtain this degreeof protection, only high-quality metal cable glands with a captivesealing ring are used. A selection for different cable diametersis listed on page 32.
Adjustability
On the chisel plungers and the roller plungers (normal andextended) the approach direction can be changed by 90° at anytime. After unscrewing the locking pin, the plunger can be rotatedby 90°.
LED function display
If required, the EUCHNER precision single limit switches of designN1A can be equipped with an LED function display (AC/DC 10 -60 V or AC 110/230 V, color red).Built-in electronic regulation ensures that the luminosity remainsconstant independent of the voltage applied.
EUCHNER
LE060 rt12-60V
X1
X2
8
Position Switches
Ordering table
Connection cable 2 m
1 NO contactConnection cable 5 m
Plug connector
Connection cable 2 m
1 NC contactConnection cable 5 m
Plug connector
Technical data
Housing materialsleevethreaded section
Degree of protection according to IEC 60529
Ambient temperature [°C]Approach speed, max. [m/min]Mechanical axial actuationlife radial actuationOperating point accuracy 2) [mm]Actuating force (end position) [N]Switching elementSwitching elementContact materialRated insulation voltage Ui [V]Utilization categoryaccording to IEC 60947-5-1Switching current, min., at 24 V [mA]Switching voltage, min. [DC V]Short circuit protection
[A gG](control circuit fuse)Type of connection PUR cable 2 x 0.5 mm² Plug connector M12 3)
1) Cable hard wired.2) The reproducible operating point accuracy relates to axial actuation, after run-in of approx. 2000 operating cycles.3) For mating connector see page 30 and 31.
Single hole fixing limit switches
Dimension drawings
! With reed contact and protective diode! Plunger material stainless steel! Any installation position
Wiring diagrams
M12 x 1, dome plungerConnection cable, double insulated
M12 x 1, dome plungerPlug connector M12 with PE connection
PlasticStainless steel
IP 68
25 1)...+808
30 x 106 operating cycles1 x 106 operating cycles (dog 30°)
± 0.01Approx. 16
Reed contact1 NO contact or 1 NC contact
Rhodium50 �
AC-12 Ue 30 V Ie 0.3 ADC-13 Ue 24 V Ie 0.3 A
11
0.4
Brass, nickel-platedStainless steel
IP 67Mating connector inserted and screwed tight
-25...+808
30 x 106 operating cycles1 x 106 operating cycles (dog 30°)
± 0.01Approx. 16
Reed contact1 NO contact or 1 NC contact
Rhodium50
AC-12 Ue 30 V Ie 0.3 ADC-13 Ue 24 V Ie 0.3 A
11
0.4
On request
082 201EGT12A5000
–
On request
078 848EGT12R5000
–
–
–
075 426EGT12ASFM5
–
–
075 427EGT12RSFM5
BUBN
BUBN
541
�
521
�1 2
4 35
∅ 6
4
4
SW17
2,5
±0,
3
0,8
-0,6
0,5
M12x1R2,5
3461
∅ 12,6
∅ 5,4
End
posi
tion
Diff
eren
tial t
rave
l
Ope
ratin
g po
int
∅ 6
4
34
75
4
SW17
M12x1
2,5
±0
,3
0,8
-0,6
0,5
∅ 10,5
M12x1R2,5
End
posi
tion
Diff
eren
tial t
rave
l
Ope
ratin
g po
int
Never switch incandescent lamps. Not evenfor test purposes.Single hole fixing limit switches must not beused as an end stop.
9
Position Switches
Dimension drawings
Wiring diagrams
M12 x 1, roller plungerPlug connector M12, double insulated
M14 x 1, ball plungerPlug connector M12 with PE connection
Brass, nickel-platedStainless steel
IP 67Mating connector inserted and screwed tight
-25...+8020
30 x 106 operating cycles
± 0.01Approx. 16
Reed contact1 NO contact or 1 NC contact
Rhodium50 �
AC-12 Ue 30 V Ie 0.3 ADC-13 Ue 24 V Ie 0.3 A
11
0.4
Plug connector M12 3)
Brass, nickel-platedStainless steel
IP 67Mating connector inserted and screwed tight
-25...+8060
30 x 106 operating cycles5 x 106 operating cycles (dog 15°)
± 0.01Approx. 3
Reed contact1 NO contact or 1 NC contact
Rhodium50
AC-12 Ue 30 V Ie 0.3 ADC-13 Ue 24 V Ie 0.3 A
11
0.4
Plug connector M12 3)
–
–
078 483EGT12ARSEM4C1888
–
–
079 139EGT12RRSEM4C1888
–
–
093 352EGT11A2NSFM5
–
–
091 848EGT11R2NSFM5
1 2
4 3
421
21
541
�
541
�1 2
4 35
4
SW17
M12x1
2,5
±0,
3
0,8
-0,6
0,5
∅ 10,5
M12x1R2,5
4
SW10
3
36
77
End
posi
tion
Diff
eren
tial t
rave
l
Ope
ratin
g po
int
∅ 6
M14x1
∅ 15,8
43
34
754
SW10
R2
SW15
M12x1
2,5
±0,
3
0,8
-0,6
0,5
End
posi
tion
Diff
eren
tial t
rave
l
Ope
ratin
g po
int
10
Position Switches
Single hole fixing limit switches
! With reed contact! Plunger material stainless steel! Any installation position
M14 x 1, ball plungerPlug connector M12
Dimension drawings
Technical dataHousing material sleeve
threaded section
Degree of protection according to IEC 60529
Ambient temperature [°C]Approach speed max. [m/min]Mechanical life (axial)Operating point accuracy 2) [mm]Actuating force (end position) [N]Switching elementSwitching elementContact materialRated insulation voltage Ui [V]Utilization categoryaccording to IEC 60947-5-1Switching current, min., at 24 V [mA]Switching voltage, min. [DC V]Short circuit protection
[A gG](control circuit fuse)Type of connection
1) Cable hard wired.2) The reproducible operating point accuracy relates to axial actuation, after run-in of approx. 2000 operating cycles.3) For mating connector see page 30 and 31.
Brass, nickel-platedStainless steel
IP 67Mating connector inserted and screwed tight
-25...+808
30 x 106 operating cycles± 0.01
Approx. 16 / 3 on requestReed contact
1 NO contact or 1 NC contactRhodium
50AC-12 Ue 30 V Ie 0.3 ADC-13 Ue 24 V Ie 0.3 A
11
0.4
Plug connector M12 3)
Ordering table
Connection cable 2 m
1 NO contactConnection cable 5 m
Plug connector
Connection cable 2 m
1 NC contactConnection cable 5 m
Plug connector
–
–
033 976EGT1/4ASEM4
–
–
033 982EGT1/4RSEM4
1 2
4 343
21
M14x1∅ 15,8
43
34
4
SW10
R2
SW15
M12x1
2,5
±0,
3
0,8
-0,6
0,5
63
∅ 6
End
posi
tion
Diff
eren
tial t
rave
l
Ope
ratin
g po
int
Never switch incandescent lamps. Not evenfor test purposes.Single hole fixing limit switches must not beused as an end stop.
M14 x 1, ball plungerConnection cable, double insulated
PlasticStainless steel
IP 68
-25 1)...+808
30 x 106 operating cycles± 0.01
Approx. 16 / 3 on requestReed contact
1 NO contact or 1 NC contactRhodium250 �
AC-12 Ue 230 V Ie 0.03 ADC-13 Ue 24 V Ie 0.3 A
11
0.4
PUR cable 2 x 0.5 mm², encapsulated
001 366EGT1/4A2000
001 368EGT1/4A5000
–
001 371EGT1/4R2000
001 372EGT1/4R5000
–
BUBN
BUBN
∅ 12,6
2,5
±0,
3
∅ 6M14x1
3
34
4
SW10
R2
0,8
-0,6
0,5
50
SW15
4
∅ 15,8
∅ 5,4
End
posi
tion
Diff
eren
tial t
rave
l
Ope
ratin
g po
int
Dimension drawings
Wiring diagrams
11
Position Switches
High-quality stainless steel
IP 68
-25...+808
30 x 106 operating cycles± 0.01
Approx. 16Reed contact1 NO contact
Rhodium50
AC-12 Ue 30 V Ie 0.3 ADC-13 Ue 24 V Ie 0.3 A
11
0.4
Hydrofirm cable 2x0.5 mm², encapsulated
M14 x 1, ball plungerPlug connector M12
M14 x 1, ball plungerConnection cable, max. pressure 300 kPa
Made of high-quality stainless steel
Brass, nickel-platedStainless steel
IP 67Mating connector inserted and screwed tight
-25...+808
30 x 106 operating cycles± 0.01
Approx. 16 / 3 on requestReed contact
1 NO contact or 1 NC contactRhodium
50AC-12 Ue 30 V Ie 0.3 ADC-13 Ue 24 V Ie 0.3 A
11
0.4
Plug connector M12 3)
–
–
075 644EGT1/4ASEM4C1802
–
–
–
094 982EGT1/4A2000C1465
–
–
–
–
–
1 2
4 3
41
BUBN
M14x1∅ 15,8
43
34
4
SW10
R2
SW15
M12x1
2,5
±0,
3
0,8
-0,6
0,5
63
∅ 6En
d po
sitio
n
Diff
eren
tial t
rave
l
Ope
ratin
g po
int
∅ 12,6
50
SW15
SW10
0,8
2,5
0,5
34 4
4
3
M14x1
∅ 15,8
∅ 6
∅ 6,5
Diff
eren
tial t
rave
l
End
posi
tion
Ope
ratin
g po
int
For plug connector with LED display
Dimension drawings
Wiring diagrams
12
Position Switches
Single hole fixing limit switches
Dimension drawings
! With snap-action switching element! Plunger material stainless steel! Any installation position
Wiring diagrams
M12 x 1, flat plungerConnection cable, double insulated
M12 x 1, flat plungerPlug connector M12
Technical dataHousing material
Degree of protection according to IEC 60529
Ambient temperature [°C]Approach speed max. [m/min]Mechanical life (axial)Operating point accuracy 2) [mm]Actuating force (end position) [N]Switching elementSwitching elementContact materialRated insulation voltage Ui [V]Rated impulse withstand [kV]voltage Uimp
Utilization categoryaccording to IEC 60947-5-1Switching current, min., at 24 V [mA]Switching voltage, min. [DC V]Short circuit protection
[A gG](control circuit fuse)Type of connection
1) Cable hard wired.2) The reproducible operating point accuracy relates to axial actuation, after run-in of approx. 2000 operating cycles.3) For mating connector see page 30 and 31.
Stainless steel
IP 65
-20 1)...+80 -30...+808
1 x 106 operating cycles± 0.01
Approx. 16Snap-action switching element
1 changeover contactSilver alloy, gold-plated
250 �
2.5
AC-15 Ue 230 V Ie 0.5 ADC-13 Ue 24 V Ie 0.6 A
1012
2
PUR cable 3x0.5 mm² Silicone cable 3x0.5 mm²
Ordering table
Connection cable 1.2 m
Connection cable 2 m
1 changeoverConnection cable 4 mcontact
Connection cable 5 m
Plug connector
075 556 076 464EGM12-1200C1791 EGM12-1200C1820
– –
076 154–EGM12-4000C1791
– –
– –
–
–
–
–
093 733EGM12SEM4C1820
Stainless steelIP 65
Mating connector inserted and screwed tight-30...+85
81 x 106 operating cycles
± 0.01Approx. 16
Snap-action switching element1 changeover contactSilver alloy, gold-plated
50
1.5
AC-15 Ue 50 V Ie 0.5 ADC-13 Ue 24 V Ie 0.6 A
1012
2
Plug connector M12 3)
421
1 2
4 3
∅ 6
16
1,5
+0,
2
∅ 5,5M12x1
1±
0,3
0,12
±0,
06
0,5
1200
40
8
30
∅ 14
Diff
eren
tial t
rave
l
End
posi
tion
Ope
ratin
g po
int
M12x1
1657
4
SW17 ∅ 10,5
141,
5+
0,2
1±
0,3
0,12
±0,
06
0,5
Diff
eren
tial t
rave
l
End
posi
tion
Ope
ratin
g po
int
Single hole fixing limit switches must not beused as an end stop.
BKBUBN
...C1791
WH
GNBN
...C1820
13
Position Switches
M12 x 1, flat plungerPlug connector M8
M12 x 1, ball plungerConnection cable with PE connection
–
–
–
–
077 228EGM12SAM3C1868
–
092 695EGT1M12-2000
–
093 364EGT1M12-5000
–
Stainless steelIP 65
Mating connector inserted and screwed tight-20...+85
81 x 106 operating cycles
± 0.01Approx. 16
Snap-action switching element1 NO contact
Silver alloy, gold-plated50
1.5
AC-15 Ue 24 V Ie 0.5 ADC-13 Ue 24 V Ie 0.6 A
1012
2
Plug connector M8 3)
Brass, nickel-platedIP 67
Mating connector inserted and screwed tight-25 1)...+80
81 x 106 operating cycles
± 0.01Approx. 20
Snap-action switching element1 changeover contactSilver alloy, gold-plated
250
2.5
AC-15 Ue 230 V Ie 0.5 ADC-13 Ue 24 V Ie 0.6 A
1012
2
PUR cable 4 x 0.5 mm²
BKBUBN
GNYE �
1±
0,3
1,5
+0,
2
>0,
2
50
M8x1
0,12
M12x1∅ 5,5
M12x1
84
164
10,8
SW17
4,8
∅ 15,8
±0,
06D
iffer
entia
l tra
vel
End
posi
tion
Ope
ratin
g po
int
∅ 12,6
SW10
3,5
0,15
0,5
427
3
M12x1
∅ 6
SW17
3
18
65
∅ 6,0
Diff
eren
tial t
rave
l
End
posi
tion
Ope
ratin
g po
int
Brass, nickel-platedIP 67
Mating connector inserted and screwed tight-25...+80
81 x 106 operating cycles
± 0.01Approx. 20
Snap-action switching element1 changeover contactSilver alloy, gold-plated
50
2.5
AC-15 Ue 50 V Ie 0.5 ADC-13 Ue 24 V Ie 0.6 A
1012
2
Plug connector M12 3)
M12 x 1, ball plungerPlug connector M12
421
1 2
4 3
3,5
0,15
0,5
M12x1
∅ 6
M12x1
SW17
427
33
18
∅ 12,6
74
Diff
eren
tial t
rave
l
End
posi
tion
Ope
ratin
g po
int
–
–
–
–
093 365EGT1M12SEM4
Dimension drawings
Wiring diagrams
41
31
4
14
Position Switches
Single hole fixing limit switches
! With snap-action switching element! Plunger material stainless steel! Any installation position
Dimension drawings
Wiring diagrams
Technical dataHousing material
Degree of protection according to IEC 60529
Ambient temperature [°C]Approach speed, max. [m/min]Mechanical life (axial)Operating point accuracy 2) [mm]Actuating force (end position) [N]Switching elementSwitching elementContact materialRated insulation voltage Ui [V]Rated impulse with stand
[kV]voltage Uimp
Utilization categoryaccording to IEC 60947-5-1Switching current, min., at 24 V [mA]Switching voltage, min. [DC V]Short circuit protection
[A gG](control circuit fuse)Type of connection
1) Cable hard wired.2) The reproducible operating point accuracy relates to axial actuation, after run-in of approx. 2000 operating cycles.3) For mating connector see page 30 and 31.
Brass, nickel-plated
IP 67
-25 1)...+808
1 x 106 operating cycles± 0.01
Approx. 20Snap-action switching element
1 changeover contactSilver alloy, gold-plated
250
2.5
AC-15 Ue 230 V Ie 0.5 ADC-13 Ue 24 V Ie 0.6 A
1012
2
PUR cable 4 x 0.5 mm²
Brass, nickel-platedIP 67
Mating connector inserted and screwed tight-25...+80
81 x 106 operating cycles
± 0.01Approx. 20
Snap-action switching element1 changeover contactSilver alloy, gold-plated
50
2.5
AC-15 Ue 50 V Ie 0.5 ADC-13 Ue 24 V Ie 0.6 A
1012
2
Plug connector M12 3)
Ordering table
Connection cable 2 m
1 changeoverConnection cable 5 mcontact
Plug connector
001 732EGT1-2000001 733
EGT1-5000
–
–
–
019 727EGT1SEM4
M14 x 1, ball plungerConnection cable with PE connection
M14 x 1, ball plungerPlug connector M12
BKBUBN
GNYE � 431
1 2
4 3
4
3,5
0,150,5
∅ 15,8
M14x1
∅ 16
74
27
34
SW 15
M12x1
Diff
eren
tial t
rave
l
End
posi
tion
Ope
ratin
g po
int
∅ 12
3,5
0,15
0,5
4
4
65
27
3
M14x1
∅ 15,8
∅ 6
SW 15
SW 10
∅ 6,0
Diff
eren
tial t
rave
l
End
posi
tion
Ope
ratin
g po
int
Single hole fixing limit switches must not beused as an end stop.
15
Position Switches
Brass, nickel-platedIP 67
Mating connector inserted and screwed tight-25...+80
81 x 106 operating cycles
0.01Approx. 20
Snap-action switching element1 changeover contactSilver alloy, gold-plated
50
2.5
DC-13 Ue 24 V Ie 0.6 A
1012
2
Plug connector M12 3)
Brass, nickel-platedIP 67
Mating connector inserted and screwed tight-5...+80
81 x 106 operating cycles
0.01Approx. 20
Snap-action switching element1 changeover contactSilver alloy, gold-plated
50
2.5
AC-15 Ue 50 V Ie 0.5 ADC-13 Ue 24 V Ie 0.6 A
1012
2
Plug connector M12 3)
M14 x 1, ball plungerPlug connector M12
For plug connector with LED display
–
–
054 250EGT1SEM4C1613
Suitable for aggressive coolants,Diaphragm made out of Viton
M14 x 1, ball plungerPlug connector M12
–
–
077 347EGT1SEM4C1832
431
1 2
4 3
WHBN
BK 4
21
3BU
GN
YE
+
-
421
31 2
4 3
4
3,5
0,150,5
∅ 15,8
M14x1
∅ 16
74
27
34
SW 15
M12x1
Diff
eren
tial t
rave
l
End
posi
tion
Ope
ratin
g po
int
4
3,5
0,150,5
∅ 15,8
M14x1
∅ 16
74
27
34
SW 15
M12x1
Diff
eren
tial t
rave
l
End
posi
tion
Ope
ratin
g po
int
Dimension drawings
Wiring diagrams
16
Position Switches
Single hole fixing limit switches
Dimension drawings
! With snap-action switching element! Plunger material stainless steel! Any installation position
Wiring diagrams
M18 x 1.5, ball plungerConnection cable with PE connection
Technical dataHousing material
Degree of protection according to IEC 60529
Ambient temperature [°C]Approach speed, max. [m/min]Mechanical lifeOperating point accuracy 1) [mm]Actuating force (end position) [N]Switching elementSwitching elementContact materialRated insulation voltage Ui [V]Rated impulse
[kV]withstand voltage Uimp
Utilization categoryaccording to IEC 60947-5-1Switching current, min., at 24 V [mA]Switching voltage, min. [DC V]Short circuit protection
[A gG](control circuit fuse)Type of connection
1) The reproducible operating point accuracy relates to axial actuation, after run-in of approx. 2000 operating cycles.2) For mating connector see page 30 and 31.
Brass, nickel-plated
IP 67
-5...+6010
3 x 106 operating cycles± 0.01
Approx. 24Snap-action switching element1 NC contact and 1 NO contact
Fine silver gold-plated250
2.5
AC-15 Ue 230 V Ie 2 ADC-13 Ue 24 V Ie 1 A
1012
2 A
PUR cable 5 x 0.75 mm²
Ordering table
Connection cable 2 m
1 NC contact +Connection cable 5 m1 NO contact
Plug connector
001 864EGT2-2000001 865
EGT2-5000
–
–
–
052 504EGT2SEM4
Brass chromium platedIP 67
Mating connector inserted and screwed tight-5...+60
103 x 106 operating cycles
± 0.01Approx. 24
Snap-action switching element1 NC contact and 1 NO contact
Fine silver gold-plated50
2.5
AC-15 Ue 30 V Ie 2 ADC-13 Ue 24 V Ie 1 A
1012
2 A
Plug connector M12 2)
M18 x 1.5, ball plungerPlug connector M12
BUBN
BKBK
GNYE �
21
341 2
4 3
SW 22
M12x1
∅ 16
32
0,5
0,5
4
∅ 24M18x1,5
∅ 9
593
44
Diff
eren
tial t
rave
l
End
posi
tion
Ope
ratin
g po
int
5
32
4
0,5
0,5
4
4
∅ 24M18x1,5
∅ 9
85
∅ 16
SW 22
SW 14
Diff
eren
tial t
rave
l
End
posi
tion
Ope
ratin
g po
int
Single hole fixing limit switches must not beused as an end stop.
17
Position Switches
Dimension drawings
Wiring diagrams
M18 x 1.5, ball plungerPlug connector M12 with PE connection
Brass chromium platedIP 67
Mating connector inserted and screwed tight-5...+60
103 x 106 operating cycles
± 0.01Approx. 24
Snap-action switching element1 NC contact and 1 NO contact
Fine silver gold-plated50
2.5
AC-15 Ue 30 V Ie 2 ADC-13 Ue 24 V Ie 1 A
1012
2 A
Plug connector M12 2)
–
–
042 819EGT2SEM5
∅∅∅∅∅ 18 , ball plungerConnection cable with PE connection
Steel/brass
IP 67
-5...+60Contact force max. 40 kN3 x 106 operating cycles
± 0.01Approx. 18
Snap-action switching element1 NC contact and 1 NO contact
Fine silver gold-plated250
2.5
AC-15 Ue 230 V Ie 2 ADC-13 Ue 24 V Ie 1 A
1012
2 A
PUR cable 5 x 0.75 mm²
Switch head can be used as end stop
001 896EGT3-2000001 897
EGT3-5000
–
Switch head can be used as end stop
∅∅∅∅∅18 , ball plungerPlug connector M12
Steel/brass
IP 67
-5...+60Contact force max. 40 kN3 x 106 operating cycles
± 0.01Approx. 18
Snap-action switching element1 NC contact and 1 NO contact
Fine silver gold-plated50
2.5
AC-15 Ue 30 V Ie 2 ADC-13 Ue 24 V Ie 1 A
1012
2 A
Plug connector M12 2)
–
–
070 834EGT3SEM4
21
345 �1 2
4 35 BUBN
BKBK
GNYE �
21
341 2
4 3
∅ 9
∅ 24∅ 26,8
R18
23,7
9,5
352
7
1,5
10,5
5,1
∅ 16
88
∅ 9
∅ 24∅ 26,8
R18
23,7
9,5
352
7
1,5
10,5
5,1
∅ 16
96
M12x1
SW 22
M12x1
∅ 16
32
0,5
0,5
4
∅ 24M18x1,5
∅ 9
593
44
Diff
eren
tial t
rave
l
End
posi
tion
Ope
ratin
g po
int
Diff
eren
tial t
rave
l
End
posi
tion
Ope
ratin
g po
int
Diff
eren
tial t
rave
l
End
posi
tion
Ope
ratin
g po
int
Steel
Brass
O-ring seals andholds switch in hole∅18 H9
Steel
Brass
O-ring seals andholds switch in hole∅18 H9
Hardenedend stop
Hardenedend stop
18
Position Switches
Technical dataHousing material
Degree of protection according to IEC 60529
Ambient temperature [°C]Approach speed, max. [m/min]Mechanical lifeOperating point accuracy 2) [mm]Actuating force (end position) [N]Switching elementSwitching elementContact materialRated insulation voltage Ui [V]Rated impulse
[kV]withstand voltage UimpUtilization categoryaccording to IEC 60947-5-1Switching current, min., at 24 V [mA]Switching voltage, min. [DC V]Short circuit protection
[A gG](control circuit fuse)Type of connection
1) Cable hard wired.2) The reproducible operating point accuracy relates to axial actuation, after run-in of approx. 2000 operating cycles.
Ordering table
Connection cable 2 m
1 NC contact +Connection cable 5 m 1 NO contact
Connection cable 10 m
M18 x 1.5, ball plungerConnection cable, PE connection
With 4 switching elements
Brass, nickel-plated
IP 67
-25 1)...+7010
5 x 105 operating cycles± 0.01
Approx. 25Snap-action switching element
2 NC contacts and 2 NO contactsFine silver gold-plated
250
2.5
AC-15 Ue 230 V Ie 2 ADC-13 Ue 24 V Ie 1 A
1012
2
PUR cable 9 x 0.5 mm²
65 7 8 GNYE21 3 4
�
Single hole fixing limit switches
! With snap-action switching element! Plunger material stainless steel! Any installation position
094 339EGT4-2000
092026EGT4-5000093 967
EGT4-10000
Wiring diagrams
∅ 9M18x1,5
∅ 24
54
432
∅ 24,5
max
. 115
0,5
3,5
±0,
7
1,2
SW22
∅ 8,6±0,4
Dimension drawings
Diff
eren
tial t
rave
l
End
posi
tion
Distance between thetwo operating pointsmax. 0.7 mm
Single hole fixing limit switches must not beused as an end stop.
Ope
ratin
g po
int
19
Position Switches
Ordering tableArticle Number of brackets Dimension l1 [mm] Order No.
RGKB02N12 2 62 084 511RGKB04N12 4 86 084 514RGKB06N12 6 110 084 510
Spacing 12 mm
Multiple clamping strip! For single hole fixing limit switches
EGT 12 / EGM 12! Switch position as for multiple limit
switches in accordance with DIN 43697! For 2, 4 or 6 single hole fixing limit switches Dimension drawings
The multiple clamping strip is used for mountingseveral single hole fixing limit switches of designEGT 12 / EGM 12.The robust actuator-sensor bracket with quick-action fastening system is mounted on analuminum flange with fastening holes inaccordance with DIN 43697.
∅ 1
0,5
∅ 1
2
34 30
22
8
∅ 6,6
∅ 6
100
120
∅ 6,6
∅ 6
15
Mmax. = 130 Ncm
12
n
39
14
55
26
l 1
n
12
30
20
20
Position Switches
Technical dataHousing material
Degree of protection according to IEC 60529
Ambient temperature [°C]Plunger typeOperating point accuracy 1) [mm]Max. approach speed 2) [m/min]Approach speed, min. [m/min]Actuating force, max. [N]Switching elementSwitching elementSwitching principleMechanical lifeRated impulse withstand
[kV]voltage UimpRated insulation voltage Ui [V]Utilization category accordingto IEC 60947-5-1Contact materialSwitching current, min. at [mA]Switching voltage [DC V]Short circuit protection
[A gG](control circuit fuse)Type of connection
1) The reproducible operating point accuracy relates to axial actuation, after run-in of approx. 2000 operating cycles.2) The approach speed applies for a trip dog approach angle of 30°, 100 mm long, hardened and ground.3) All the plunger travel data relate to axial actuation. On the use of EUCHNER trip dogs, the travels at the trip rail double.4) For mating connector see page 30 and 31.
Die-cast aluminum, anodized
IP 67
-5...+80Chisel Roller Ball± 0.02 ± 0.05 ± 0.03
20 50 80.0115
ES550 ES5621 changeover contact
Snap-action switching element1 x 107 operating cycles
2.5
250AC-15 Ue 230V Ie 2A DC-13 Ue 30V Ie 100mA
DC-13 Ue 24V Ie 2A
Silver, gold-plated Gold alloy10 524 5
4 0.125
Soldered connection, 1.0 mm² max.
Precision single limit switches
Dimension drawings
! Plunger material stainless steel
Wiring diagrams
Ordering table Plunger type
Chisel plunger
Roller plunger
Ball plunger
Design N01Cable entry M12 x 1.5
Design N01Cable entry M12 x 1.5
For temperatures up to 180 °C
Die-cast aluminum, anodized
IP 67
-5...+180Chisel Roller Ball± 0.02 ± 0.05 ± 0.03
20 50 80.0115
ES5721 changeover contact
Snap-action switching element1 x 107 operating cycles
2.5
250AC-15 Ue 230V Ie 4ADC-13 Ue 24V Ie 1A
Fine silver10244
Soldered connection, 1.0 mm² max.
ES550 ES562084 902 087 151
N01D550-M N01D562-M084 903 085 243
N01R550-M N01R562-M084 904 087 152
N01K550-M N01K562-M
ES572087 162
N01D572-M087 163
N01R572-M087 164
N01K572-M
421
�
ES550/ES562
421
�
ES572
40
20
∅ 6
25
∅ 4,3
∅ 89,
511 13
,5
27
12,5
402
M12x1,5
4,2
30˚ max.
Free
pos
ition
Ope
ratin
g po
int
Plunger depending on designDog
40
20
∅ 6
25
∅ 4,3
∅ 8
9,5
11 13,5
27
12,5
402
M12x1,5
4,2
30˚ max.
Free
pos
ition
Ope
ratin
g po
int
Plunger depending on designDog
21
Position Switches
Dimension drawings
Wiring diagrams
Design N01Cable gland M12 x 1.5
Design N01Connection cable, length 5 m
Design N01M12 plug adjustable, 5-pin
Die-cast aluminum, anodized
IP 67
-5...+80Chisel Roller Ball± 0.02 ± 0.05 ± 0.03
20 50 80.0115
ES5501 changeover contact
Snap-action switching element1 x 107 operating cycles
2.5
250AC-15 Ue 230V Ie 2ADC-13 Ue 24V Ie 2A
Silver, gold-plated1024
4 A
Soldered connection, 1.0 mm² max.
ES550085 708
N01D550-MC2018094 856
N01R550-MC2018089 619
N01K550-MC2018
Die-cast aluminum, anodized
IP 67
-5...+80Chisel± 0.02
200.0115
ES5501 changeover contact
Snap-action switching element1 x 107 operating cycles
2.5
250AC-15 Ue 230V Ie 2ADC-13 Ue 24V Ie 2A
Silver, gold-plated1024
4 A gG
PUR cable 4 x 0.5 mm²
ES550022 254
N01D550X5000
–
–
Die-cast aluminum, anodizedIP 67
Mating connector inserted and screwed tight-5...+80
Chisel Roller Ball± 0.02 ± 0.05 ± 0.03
20 50 100.0115
ES550 ES5621 changeover contact
Snap-action switching element1 x 107 operating cycles
2.5
50 50AC-15 Ue 30V Ie 2A DC-13 Ue 30V Ie 100mA
DC-13 Ue 24V Ie 3A
Silver, gold-plated Gold alloy10 524 5
4 A gG 0.125 gG
Plug connector M12 4)
ES550 ES562088 623
–N01D550SVM5-M088 624 093 426
N01R550SVM5-M N01R562SVM5-M088 622
–N01K550SVM5-M
421
�
ES550
BKBUBN
GNYE �
ES550
421
5 �
ES550
1 2
4 35
40
20
∅ 6
25
∅ 4,3
∅ 8
9,511 13,5
27
12,5
402
M12x1,5
4,2
30˚ max.
Free
pos
ition
Ope
ratin
g po
int
Plunger depending on designDog
4020
∅ 6
25
∅ 4,3
∅ 8
9,5
11 13,5
27
12,5
402
4,2
20
30˚ max.
Free
pos
ition
Ope
ratin
g po
int
Plunger depending on designDog
4020
∅ 6
25
∅ 4,3
∅ 8
9,5
11 13,5
27
12,5
40
4,2
24
30˚ max.
Free
pos
ition
Ope
ratin
g po
int
Plunger depending on designDog
Cable diameter4 - 6.5 mm
22
Position Switches
Technical dataHousing material
Degree of protection according to IEC 60529
Ambient temperature [°C]Plunger typeOperating point accuracy 1) [mm]Max. approach speed 2) [m/min]Approach speed, min. [m/min]Actuating force, max. [N]Switching elementSwitching elementSwitching principleMechanical lifeRated impulse withstand
[kV]voltage UimpRated insulation voltage Ui [V]Utilization categoryaccording to IEC 60947-5-1Contact materialSwitching current, min. at [mA]Switching voltage [DC V]Short circuit protection
[A gG](control circuit fuse)
Type of connection
1) The reproducible operating point accuracy relates to axial actuation, after run-in of approx. 2000 operating cycles.2) The approach speed applies for a trip dog approach angle of 30°, 100 mm long, hardened and ground.3) All the plunger travel data relate to axial actuation. On the use of EUCHNER trip dogs, the travels at the trip rail double.4) For mating connector see page 30 and 31.
Precision single limit switches
Dimension drawings
! Plunger material stainless steel
Wiring diagrams
Ordering tablePlunger type
Chisel plunger
Roller plunger
Ball plunger
Design N01M12 plug, 4-pin
Design N01M12 plug, 4-pin
Die-cast aluminum, anodizedIP 67
Mating connector inserted and screwed tight-5...+80
Chisel Roller Ball± 0.02 ± 0.05 ± 0.03
20 50 80.0115
ES5501 changeover contact
Snap-action switching element1 x 107 operating cycles
2.5
50
DC-13 Ue 24V Ie 2A
Silver, gold-plated1024
4
Plug connector M12 4)
For plug connector with LED display
ES550091 003
N01D550-MC1526091 001
N01R550-MC1526091 002
N01K550-MC1526
Die-cast aluminum, anodizedIP 67
Mating connector inserted and screwed tight-5...+80
Chisel Roller Ball± 0.02 ± 0.05 ± 0.03
20 50 80.0115
ES5501 changeover contact
Snap-action switching element1 x 107 operating cycles
2.5
250AC-15 Ue 230V Ie 2ADC-13 Ue 24V Ie 2A
Silver, gold-plated1024
4
Plug connector M12, B-coded 4)
ES550
–
091 257N01R550SEM5-M
–
WHBN
BK 4
21
3BU
GN
YE
+
- 1 2
4 3
421
3
ES550
4020
∅ 6
25
∅ 4,3
∅ 89,
511 13
,5
27
12,5
40
4,2
1530˚ m
ax.
Free
pos
ition
Ope
ratin
g po
int
Plunger depending on designDog
4020
∅ 6
25
∅ 4,3
∅ 8
9,5
11 13,5
27
12,5
40
4,2
15
30˚ max.
Free
pos
ition
Ope
ratin
g po
int
Plunger depending on designDog
For operating voltage 230 V
1 2
4 35
421
5 �
ES550
To achieve the positively driven travel, thedimension 11-0,5 must be maintained bythe trip dog. Actuation elements such asdog approach guides must be firmlymounted in accordance with EN 1088, i.e.riveted, welded or otherwise securedagainst becoming loose.
23
Position Switches
Design NB01Cable entry M12 x 1.5
Design SN01Cable entry M16 x 1.5
Die-cast aluminum, anodized
IP 67
-25...+60Chisel Roller± 0.02 ± 0.0520 50
0.0115
ES5881 NC contact
Slow-action switching element1 x 107 operating cycles
2.5
250AC-15 Ue 230V Ie 4ADC-13 Ue 24V Ie 3A
Fine silver15
10
Screw terminal, 1.0 mm² max.
With safety switching element
ES588088 584
NB01D588-M088 583
NB01R588-M–
Die-cast aluminum, anodized
IP 67
-5...+80Chisel Roller Ball± 0.02 ± 0.05 ± 0.03
20 50 80.0115
ES553 ES5581 changeover contact 1 NO + 1 NC
Snap-action switching element1 x 107 operating cycles
2.5
250AC-15 Ue 230V Ie 2A AC-15 Ue 230V Ie 4A
DC-13 Ue 24V Ie 2A DC-13 Ue 24V Ie 3A
Silver, gold-plated Silver– 10– 5
4 A gG 4 A gG
Screw terminal, soldered connection,1.0 mm², max. 1.0 mm², max.
ES553 ES558085 252 085 260
SN01D553-M SN01D558-M085 253 085 261
SN01R553-M SN01R558-M085 254 085 262
SN01K553-M SN01K558-M
Dimension drawings
Wiring diagrams
Design NB01Cable entry M12 x 1.5
ES556085 245
NB01D556-M085 246
NB01R556-M085 247
NB01K556-M
Die-cast aluminum, anodized
IP 67
-5...+80Chisel Roller Ball± 0.02 ± 0.05 ± 0.03
20 50 80.0115
ES5561 changeover contact
Snap-action switching element1 x 107 operating cycles
2.5
250AC-15 Ue 230V Ie 2ADC-13 Ue 24V Ie 2A
Silver, gold-plated––
4
Screw terminal, 1.0 mm² max.
421
�
ES556
21
�
ES588
421
�
ES553
2221
1314
�
ES558
58
20
∅ 6
25
∅ 4,3
∅ 8
9,5
13,5
27
12,5
402
M12x1,5
4,2
30˚ max.
11-0
,5
Free
pos
ition
Ope
ratin
g po
int
Plunger depending on designDog
44
20
∅ 6
25
∅ 4,3
∅ 8
9,5
11 13,5
27
12,5
402
M12x1,5
4,2
30˚ max.
Free
pos
ition
Ope
ratin
g po
int
Plunger depending on designDog ∅ 6
9,5
11 13,5
27
12,5
M16x1,5
50
22
45
∅ 8
∅ 4,3
25
4,2
30˚ max.
Free
pos
ition
Ope
ratin
g po
int
Plunger depending on designDog
24
Position Switches
Technical dataHousing material
Degree of protection according to IEC 60529
Ambient temperature [°C]Plunger typeOperating point accuracy 1) [mm]Max. approach speed 2) [m/min]Approach speed, min. [m/min]Actuating force, max. [N]Switching elementSwitching elementSwitching principleMechanical lifeRated impulse withstandvoltage Uimp [kV]Rated insulation voltage Ui [V]Utilization categoryaccording to IEC 60947-5-1Contact materialSwitching current, min. at [mA]Switching voltage [DC V]Short circuit protection
[A gG](control circuit fuse)Type of connection
1) The reproducible operating point accuracy relates to axial actuation, after run-in of approx. 2000 operating cycles.2) The approach speed applies for a trip dog approach angle of 30°, 100 mm long, hardened and ground.3) All the plunger travel data relate to axial actuation. On the use of EUCHNER trip dogs, the travels at the trip rail double.
Precision single limit switches
Dimension drawings
! Plunger material stainless steel
Wiring diagrams
Ordering tablePlunger type
Chisel plunger
Roller plunger
Ball plunger
Dome plunger
Design SN01M12 plug, 5-pin
Design SN01Connection cable, length 2 m
ES558088 625
SN01D558SVM5-M088 626
SN01R558SVM5-M088 627
SN01K558SVM5-M
–
Die-cast aluminum, anodizedIP 67
Mating connector inserted and screwed tight-5...+80
Chisel Roller Ball± 0.02 ± 0.05 ± 0.03
20 50 80.0115
ES5581 NO contact + 1 NC contactSnap-action switching element
1 x 107 operating cycles
2.5
50AC-15 Ue 36V Ie 4ADC-13 Ue 24V Ie 3A
Silver105
4
Plug connector M12 6)
Die-cast aluminum, anodized
IP 67
-5...+80Roller± 0.05
500.0115
ES5581 NO contact + 1 NC contactSnap-action switching element
1 x 107 operating cycles
2.5
250AC-15 Ue 230V Ie 4ADC-13 Ue 24V Ie 3A
Silver105
4
PUR cable 5 x 0.5 mm²
ES558
–
090 515SN01R558X2000-M
–
–
1 2
4 35
21
345
21
13
22
14
�
ES558
∅ 6
9,5
11 13,5
27
12,5
5022
45
∅ 8
∅ 4,3
25
4,2
30˚ max.
20
Free
pos
ition
Ope
ratin
g po
int
Plunger depending on designDog
R2,5 ∅ 6
9,5
11 13,5
27
12,5
5022
45
∅ 8
∅ 4,3
25
4,2
30˚ max.
20
Free
pos
ition
Ope
ratin
g po
int
Dog
BU/2BN/1
BK/3BK/4GNYE
21
13
22
14
�
ES558 To achieve the positively driven travel, thedimension 12-0,5 must be maintained bythe trip dog. Actuation elements such asdog approach guides must be firmlymounted in accordance with EN 1088, i.e.riveted, welded or otherwise securedagainst becoming loose.
Plunger depending on design
25
Position Switches
Dimension drawings
Design N1ACable entry M16 x 1.5
Design N1ACable entry M16 x 1.5
Design N1AM12 plug, 5-pin
4) Version with bearing for high speeds and long travel distances on request.5) Version with LED function display AC/DC 10-60V or AC 110/230 V on request.6) For mating connector see page 30 and 31.
Die-cast aluminum, anodized
IP 67
-5...+80Chisel Roller 4) Ball
± 0.002 ± 0.01 ± 0.0140 80 10
0.01≥ 20
ES502E 5)
1 NO contact + 1 NC contactSnap-action switching element
30 x 106 operating cycles
2.5
250AC-12 Ue 230V Ie 10A / AC-15 Ue 230V Ie 6A
DC-13 Ue 24V Ie 6ASilver, gold-plated
1024
10
Screw terminal, 1.5 mm² max.
With safety switching element
Die-cast aluminum, anodized
IP 67
-25...+80Chisel Roller Dome
± 0.002 ± 0.01 ± 0.00240 80 10
0.01≥ 15 ≥ 30
ES508 5) ES5141 NC contact 1 NO + 1 NC
Slow-action switching Snap-action switching30 x 106 operating cycles 1 x 106 operating cycles
2.5
250AC-12 Ue 230V Ie 6A AC-15 Ue 230V Ie 2.5A
DC-13 Ue 24V Ie 6A DC-13 Ue 24V Ie 6A
Silver, gold-plated10 524 24
10
Screw terminal, 1.5 mm² max.
ES502E079 265
N1AD502-M078 485
N1AR502-M083 847
N1AK502-M
–
ES508 ES514083 886 083 849
N1AD508-M N1AD514-M083 887 078 487
N1AR508-M N1AR514-M
– –
087 205 083 850N1AW508-M N1AW514-M
Wiring diagrams
With safety switching element
Die-cast aluminum, anodizedIP 67
Mating connector inserted and screwed tight-25...+80
Chisel Roller Dome± 0.002 ± 0.01 ± 0.002
40 80 100.01≥ 30
ES5141 NO contact + 1 NC contactSnap-action switching element
1 x 106 operating cycles
2.5
50AC-15 Ue 36V Ie 2.5ADC-13 Ue 24V Ie 4A
Silver, gold-plated5
24
4
Plug connector M12 6)
ES514087 603
N1AD514SVM5-M087 604
N1AR514SVM5-M
–
090743N1AW514SVM5-M
2221
1314
�
ES502E
�2221
ES508
2221
1314�
ES514
1 2
4 35
21
345
21
13
22
14
�
ES514
Dimension drawings
2839
60 (E
S50
8) /
76
(ES
514)
∅7 ∅1135
6,8
76
14±
0,1
16∅10
26±0,1
4H
12
8
18
M16x1,5
30˚ max.
12-0
,5
Free
pos
ition
Ope
ratin
g po
int
Plunger depending on designDog
2839
6020
∅7 ∅1135
6,8
76
14±
0,1
16∅10
26±0,1
4H
12
8
18
M16x1,5
30˚ max.
12+
1-0
,5
Free
pos
ition
Ope
ratin
g po
int
Plunger depending on designDog
2839
76
∅7 ∅1135
6,8
76
14±
0,1
16∅10
26±0,1
4H
12
8
18
30˚ max.
20
12-0
,5
Free
pos
ition
Ope
ratin
g po
int
Plunger depending on designDog
LEDdisplay
26
Position Switches
Technical dataHousing material
Degree of protection according to IEC 60529
Ambient temperature [°C]Plunger typeOperating point accuracy 1) [mm]Max. approach speed 2) [m/min]Approach speed, min. [m/min]Actuating force, max. [N]Switching elementSwitching elementSwitching principleMechanical lifeRated impulse withstand
[kV]voltage UimpRated insulation voltage Ui [V]
Utilization category accordingto IEC 60947-5-1
Contact materialSwitching current, min. at [mA]Switching voltage [DC V]Short circuit protection
[A gG](control circuit fuse)Type of connection
1) The reproducible operating point accuracy relates to axial actuation, after run-in of approx. 2000 operating cycles.2) The approach speed applies for a trip dog approach angle of 30°, 100 mm long, hardened and ground.3) All the plunger travel data relate to axial actuation. On the use of EUCHNER trip dogs, the travels at the trip rail double.
Precision single limit switches! Plunger material stainless steel
Ordering tablePlunger type
Chisel plunger
Roller plunger
Ball plunger
Extended roller plunger
Design N1AM12 plug, 5-pin
Die-cast aluminum, anodizedIP 67
Mating connector inserted and screwed tight-5...+80
Chisel Roller Ball± 0.002 ± 0.01 ± 0.01
40 80 100.01≥ 20
ES502E1 NO contact + 1 NC contactSnap-action switching element
30 x 106 operating cycles
2.5
50
AC-15 Ue 36V Ie 4ADC-13 Ue 24V Ie 4A
Silver, gold-plated1024
4
Plug connector M12 5)
For plug connectors with LED display
ES502E087 487
N1AD502SVM5-M087 488
N1AR502SVM5-M087 489
N1AK502SVM5-M
–
Design N1AM12 plug, 5-pin
Die-cast aluminum, anodizedIP 67
Mating connector inserted and screwed tight-5...+80
Chisel Roller Ball± 0.002 ± 0.01 ± 0.01
40 80 100.01≥ 20
ES502E1 NO contact + 1 NC contactSnap-action switching element
30 x 106 operating cycles
2.5
50
AC-15 Ue 36V Ie 4ADC-13 Ue 24V Ie 4A
Silver, gold-plated1024
4
Plug connector M12 5)
ES502E091 471
N1AD502SVM5-MC1883on request
N1AR502SVM5-M1883087 496
N1AK502SVM5-M1883–
Dimension drawings
Wiring diagrams
1 2
4 35
21
345
21
13
22
14
�
ES502E
1 2
4 35
21
345
21
13
22
14�
ES502E
2839
60
∅7 ∅1135
6,8
76
14±
0,1
16∅10
26±0,1
4H
12
8
18
12+
1-0
,5
30˚ max.
20
Free
pos
ition
Ope
ratin
g po
int
Plunger depending on designDog
2839
60
∅7 ∅1135
6,8
76
14±
0,1
16∅10
26±0,1
4H
12
8
18
12+
1-0
,5
30˚ max.
20
Free
pos
ition
Ope
ratin
g po
int
Plunger depending on designDog
To achieve the positively driven travel, thedimension 31-0,5 must be maintained bythe trip dog. Actuation elements such asdog approach guides must be firmlymounted in accordance with EN 1088, i.e.riveted, welded or otherwise securedagainst becoming loose.
27
Position Switches
4) Version with LED function display AC/DC 10-60V or AC 110/230 V on request.5) For mating connector see 30 and 31.
Dimension drawings
Design N1A, extended roller plungerCable entry M16 x 1.5
Design N1A, extended roller plungerCable entry M16 x 1.5
Die-cast aluminum, anodized
IP 67
-5...+80Extended roller
0.120
0.01≥ 20
ES502E 4)
1 NO contact + 1 NC contactSnap-action switching element
30 x 106 operating cycles
2.5
250AC-12 Ue 230V Ie 10A AC-15 Ue 230V Ie 6ADC-13 Ue 24V Ie 6A
Silver, gold-plated1024
10
Screw terminal, 1.5 mm² max.
With safety switching element
Die-cast aluminum, anodized
IP 67
-25...+80Extended roller
0.120
0.01≥ 15 ≥ 30
ES508 ES5141 NC 1 NO + 1 NC
Slow-action switching Snap-action switching30 x 106 operating cycles 1 x 106 operating cycles
2.5
250
AC-12 Ue 230V Ie 6A AC-15 Ue 230V Ie 2.5A
DC-13 Ue 24V Ie 6A DC-13 Ue 24V Ie 6A
Silver, gold-plated10 524 24
10
Screw terminal, 1.5 mm² max.
ES502E
–
–
–
083 848N1ARL502-M
ES508 ES514
– –
– –
– –
087 147 087 204N1ARL508-M N1ARL514-M
Wiring diagrams
Dimension drawings
Design N1ACable entry M16 x 1.5
Die-cast aluminum, anodized
IP 67
-5...+80 (ES502E) -25...+80 (ES508)Chisel Roller Ball
± 0.002 ± 0.01 ± 0.0140 80 10
0.01≥ 20 ≥ 15
ES502E ES5081 NO + 1 NC 1 NC
Snap-action switching Slow-action switching30 x 106 operating cycles
2.5
250AC-12 Ue 230V Ie 10A AC-12 Ue 230V Ie 6A
AC-15 Ue 230V Ie 6A DC-13 Ue 24V Ie 6A
DC-13 Ue 24V Ie 6A
Silver, gold-plated1024
10
Screw terminal, 1.5 mm² max.
With exterior diaphragm
ES502E ES508090 542 090 546
N1AD502AM-M N1AD508AM-M090 541 090 547
N1AR502AM-M N1AR508AM-M091 059
–N1AK502AM-M
– –
2221
1314
�
ES502E
�2221
ES508
2221
1314�
ES514
2221
1314
�
ES502E
�2221
ES508
2839
60 (E
S50
8) /
75
(ES
514)
∅7 ∅1135
6,8
76
33 35
26±0,1
4H
12
8
18
M16x1,5
30˚ max.
R9
31-0
,5
Free
pos
ition
Ope
ratin
g po
int
Dog
2839
∅7 ∅1135
6,8
76
33 35
26±0,1
4H
12
8
18
31+
1-0
,5
M16x1,5
30˚ max.
R9
6020
Free
pos
ition
Ope
ratin
g po
int
Dog
2839
6020
∅7 ∅1135
6,8
76
14±
0,1
16∅10
26±0,1
4H
12
8
18
M16x1,5
30˚ max.
12-0
,5
Free
pos
ition
Ope
ratin
g po
int
Plunger depending on designDog
LEDdisplay
LEDdisplay
28
Position Switches
Technical dataHousing material
Degree of protection according to IEC 60529
Ambient temperature [°C]Plunger typeOperating point accuracy 1) [mm]Max. approach speed 2) [m/min]Approach speed, min. [m/min]Actuating force, max. [N]Switching elementSwitching elementSwitching principleMechanical lifeRated impulse withstand
[kV]voltage UimpRated insulation voltage Ui [V]Utilization categoryaccording to IEC 60947-5-1Contact materialSwitching current, min. at [mA]Switching voltage [DC V]Short circuit protection
[A gG](control circuit fuse)Type of connection
1) The reproducible operating point accuracy relates to axial actuation, after run-in of approx. 2000 operating cycles.2) The approach speed applies for a trip dog approach angle of 30°, 100 mm long, hardened and ground.3) All the plunger travel data relate to axial actuation. On the use of EUCHNER trip dogs, the travels at the trip rail double.
Precision single limit switches! Plunger material stainless steel
Ordering tablePlunger type
Chisel plunger
Roller plunger
Ball plunger
Extended roller plunger
Design N10Cable entry M20 x 1.5
Die-cast aluminum, anodized
IP 67
-5...+80Chisel Roller Ball
± 0.002 ± 0.01 ± 0.0140 80 10
0.01≥ 20
ES502V1 NO contact + 1 NC contactSnap-action switching element
30 x 106 operating cycles
2.5
250 AC-12 Ue 230V Ie 16A/AC-15 Ue 230V Ie 10A
DC-13 Ue 24V Ie 6ASilver, gold-plated
2024
16
Screw terminal, 1.5 mm² max.
ES502V086 293N10D-M086 294N10R-M088 589N10K-M
–
Dimension drawings
Wiring diagrams
Design N10, extended roller plungerCable entry M20 x 1.5
Die-cast aluminum, anodized
IP 67
-5...+80Extended roller
± 0.120
0.01≥ 20
ES502V1 NO contact + 1 NC contactSnap-action switching element
30 x 106 operating cycles
2.5
250AC-12 Ue 230V Ie 16A/AC-15 Ue 230V Ie 10A
DC-13 Ue 24V Ie 6ASilver, gold-plated
2024
16
Screw terminal, 1.5 mm² max.
ES502V
–
–
–
088 587N10RL-M
2221
1314
�
ES502V
2221
1314
�
ES502V
∅ 10
4865
62
24 25,5
1922-1
M20x1,5
20
∅ 5,5
∅ 9,436
14
30
30˚ max.
Dog Plunger depending on design
Free
pos
ition
Ope
ratin
g po
int
30˚ max.
4865
43 44,5
62
1941
-1
M20x1,5
20
∅ 5,5
∅ 9,436
14
30
R9
Dog
Free
pos
ition
Ope
ratin
g po
int
29
Position Switches
Design N11Cable entry M20 x 1.5
Dimension drawings
Wiring diagrams
Design N11, extended roller plungerCable entry M20 x 1.5
Die-cast aluminum, anodized
IP 67
-5...+80Chisel Roller Ball
± 0.002 ± 0.01 ± 0.0140 80 10
0.01≥ 20
ES502V1 NO contact + 1 NC contactSnap-action switching element
30 x 106 operating cycles
2.5
250 AC-12 Ue 230V Ie 16A/AC-15 Ue 230V Ie 10A
DC-13 Ue 24V Ie 6ASilver, gold-plated
2024
16
Screw terminal, 1.5 mm² max.
ES502V086 298N11D-M086 313N11R-M088 585N11K-M
–
ES502V
–
–
–
086 299N11RL-M
Die-cast aluminum, anodized
IP 67
-5...+80Extended roller
± 0.120
0.01≥ 20
ES502V1 NO contact + 1 NC contactSnap-action switching element
30 x 106 operating cycles
2.5
250AC-12 Ue 230V Ie 16A/AC-15 Ue 230V Ie 10A
DC-13 Ue 24V Ie 6ASilver, gold-plated
2024
16 slow blow/25 quick blow
Screw terminal, 1.5 mm² max.
2221
1314
�
ES502V
2221
1314
�
ES502V
∅ 10
1430
4865
62
24 25,5
101922-1
10
∅ 5,5
M20x1,5
46
30˚ max.
Dog Plunger depending on design
Free
pos
ition
Ope
ratin
g po
int
1430
4865
62
43 44,5
1019
41-1
10∅ 5,5
M20x1,5
46
30˚ max.
R9
Dog
Free
pos
ition
Ope
ratin
g po
int
30
Position Switches
Ordering tablePlug connector M12, without LED,Connection cable 5 m PURPlug connector M12, with 2 LEDs,Connection cable 5 m PUR
Technical dataNumber of pinsHousing materialGripContact carrierCable materialSheath colorDegree of protection according to IEC 60529(inserted and screwed tight)Ambient temperature [°C]Contact materialConductor cross-section [mm²]Contact resistance [mW]Test voltage (60 s) [kV eff]Rated voltage [V]Rated current [A]
Round plug connectors
Dimension drawings
! Straight design and right-angle plug! Screw connection! Sprayed PUR cable! Number of pins 4 and 4 + PE
Wiring diagrams
Straight plug connector M124-pin / 4-pin + PE
4 4+PE
TPU self-extinguishingTPU self-extinguishing
PUR, halogen-free, flame retardantBlack
IP 67
-25 ... +80CuSn nickel-plated, 0.3 µm gold-plated
4 x 0.34 5 x 0.5≤ 5
2 1.5AC 250/DC 300 AC 30/DC 36
4
035 613 073 461SGLF4-5000P SGLF5-5000P
– –
1 2
4 3
2
4
3
1 BN
WH
BK
BU
1 2
4 35
5 GNYE
2
4
3
1 BN
WH
BK
BU
Straight plug connector M12, coded4-pin + PE
045 524SGLF5PE-5000
–
4+PE
TPU self-extinguishingTPU self-extinguishing
PUR, halogen-free, flame retardantBlack
IP 67
-25 ... +90CuZn nickel-plated, 0.8 µm gold-plated
5 x 0.5 ≤ 52
AC 250/DC 3004
1 2
4 35
5 GNYE
2
4
3
1 BN
WH
BK
BU
∅15
42Design SGLF
∅15
42Design SGLF
Dimension drawings
Wiring diagrams
31
Position Switches
Plug connector M12 with 2 LEDs4-pin
4
TPU self-extinguishingTPU self-extinguishing
PUR, halogen-free, flame retardantBlack
IP 67
-25 ... +80CuSn nickel-plated, 0.3 µm gold-plated
4 x 0.34 ≤ 5
–DC 10 ... 30
4
–
045 523SWLF4P-5000P
1 2
4 3
WHBN
BK 4
21
3BU
GN
YE
+
-
2 LEDs27
38
∅15
Right-angle plug connector M12, coded4-pin + PE
045 523SWLF5PE-5000
–
4+PE
TPU self-extinguishingTPU self-extinguishing
PUR, halogen-free, flame retardantBlack
IP 67
-25 ... +90CuSn nickel-plated, 0.8 µm gold-plated
5 x 0.5 ≤ 52
AC 250/DC 3004
1 2
4 35
5 GNYE
2
4
3
1 BN
WH
BK
BU
27
38
∅15
Design SWLF
Right-angle plug connector M124-pin / 4-pin + PE
4 4+PE
TPU self-extinguishingTPU self-extinguishing
PUR, halogen-free, flame retardantBlack
IP 67
-25 ... +80CuSn nickel-plated, 0.3 µm gold-plated
4 x 0.34 5 x 0.5 ≤ 5
2 1.5AC 250/DC 300 AC 30/DC 36
4
035 618 073 462SWLF4-5000P SWLF5-5000P
– –
1 2
4 3
2
4
3
1 BN
WH
BK
BU
1 2
4 35
5 GNYE
2
4
3
1 BN
WH
BK
BU
27
38
∅15
Design SWLF
32
Position Switches
LED function displayOn request, versions with voltage ranges AC 110/230 V are available.
Operating voltage [V] Color Article Order No.Red LE 060 rt 035 495
AC/DC 12 - 60 Green LE 060 gr 035 496Yellow LE 060 ge 035 497
Metric Cable outerA B E SW
Article thread diameter[mm] [mm] [mm] [mm]
Order No.
M [mm]EKVM12/04 M12 x 1.5 4 - 6.5 20 5 15.5 14 086 327EKVM16/04 M16 x 1.5 4 - 6.5 20 6 20 18 086 328EKVM16/06 M16 x 1.5 6.5 - 9.5 20 6 20 18 086 330EKVM20/06 M20 x 1.5 6.5 - 9.5 20 6 24.4 22 077 683
E M
BA
SW
Cable glandsMaterial nickel-plated brass, degree of protection IP 67
Trip rails / trip dogs
U-trip railsenable the trip dogs to be adjusted from the switch side. The trips dogscan be installed and adjusted quickly and easily in any location.
U-trip dogsare designed for usage in U-trip rails. They have an expansion plateclamp and enable precise adjustment, even when the limit switch isactivated.
G-trip railsenable the trip dogs to be adjusted from the side opposite the switch.They are made of steel and are protected from corrosion by a specialsurface treatment. Trip rails can be ordered pre-assembled or as acomponent for self-assembly.
G-trip dogsare designed for use in G-trip rails. The trip dogs are clamped in the triprail by a hexagon socket head screw with spring washer. This washerlocks the trip dog in place even when the trip rail is in a vertical positionand allows precise adjustment.
Additional products
33
Position Switches
For your notes
34
JapanSolton Co. Ltd.2-13-7, Shin-YokohamaKohoku-ku, YokohamaJapan 222-0033Tel. +81 (0) 45 4 71 77 11Fax +81 (0) 45 4 71 77 [email protected]
KoreaEUCHNER Korea Ltd.RM 810 Daerung Technotown#448 Gasan-DongKumchon-Gu, SeoulTel. +82 (02) 2107 3500Fax +82 (02) 2107 [email protected]
MexicoSEPIA S.A. de C.V.Maricopa # 10302, Col. Napoles.Del. Benito JuarezMEX-03810 Mexico D:F:Tel. +52 (5) 6822 347Fax +52 (5) 5367 [email protected]
New ZealandWAF, W. Arthur Fisher11 Te Apunga PlaceMt. WellingtonAukland, New ZealandTel. +64 (0) 9 270 0100Fax +64 (0) 9 270 [email protected]
NorwayELIS ELEKTRO ASJericoveienN-1067 OsloTel. +47 (22) 90 56 70Fax +47 (22) 90 56 [email protected]
PolandELTRONpl. Wolnosci 7 BPL 50-071 WroclawTel. +48 (0)71 343 97 55Fax +48 (0)71 343 96 [email protected]
PortugalPAM – Serviços TécnicosIndustriais, LdaRua Senhora da Alegria 188P-4785 Alvarelhos STSTel. +3 51 (0) 22 98 27 518Fax +3 51 (0) 22 98 27 [email protected]
SingaporeSENTRONICSAutomation and Marketing Pte LtdBlk 3021 Ubi Avenue 2# 03-169SGP-Singapore 408897Tel. +65/6744 8018Fax +65/6744 [email protected]
RRRRRepreprepreprepreeeeesentsentsentsentsentation intation intation intation intation internernernernernationationationationationalalalalal
AustraliaMicromax Pty. Ltd.PO Box 1238AUS-WollongongNSW Australia 2500Tel. +61 (0) 2 4271 1300Fax +61 (0) 2 4271 [email protected]
AustriaEUCHNER Ges. mbHSüddruckgasse 4A-2512 TribuswinkelTel. +43 (0) 22 52 4 21 91Fax +43 (0) 22 52 4 52 [email protected]
BeneluxEUCHNER (BENELUX) B.V.Postbus 119NL-3350 AC PapendrechtTel. +31 (0) 78 6 15 47 66Fax +31 (0) 78 6 15 43 [email protected]
BrazilEUCHNER Itda.Av. Prof. Luiz Ignacio AnhaiaMello no. 4387S. LucasSão Paulo SP BrasilCEP 03295-000Tel. +55 (0) 11 69 18-22 00Fax +55 (0) 11 61 01-06 [email protected]
CanadaIAC & Associates Inc.1925 Provincial RoadWindsor, Ontario N9A 6J3Tel. +1 (5 19) 966-3444Fax +1 (5 19) [email protected]
ChinaKnowhow I&C Co.C-2204 Webok Times CenterNo. 17 Zhongguancun NandajieBeijing, 100081Tel. +86 10 8857 8899Fax +86 10 8857 [email protected]
Czech RepublicAmtek spol s.r.o.Elektronicke SoucastkyAutomatizacni TechnikaPresne strojìrenstviVidenská 125CZ-619 00 BrnoCeská republikaTel. +420 5 47 12 55 70Fax +420 5 47 12 55 [email protected]
DenmarkRobotek EL & TEKNIK A/SBlokken 31, Postboks 30DK-3460 BirkerødTel. +45 44 84 73 60Fax +45 44 84 41 [email protected]
Eastern EuropeHera Handels Ges. mbHHauptstraße 61A-2391 KaltleutgebenTel. +43 (0) 22 38 7 75 18Fax +43 (0) 22 38 7 75 [email protected]
FinlandSähkölehto OyLehto & Co.Holkkitie 14FIN-00880 HelsinkiTel. +358 (0) 9 774 6420Fax +358 (0) 9 759 [email protected]
FranceEUCHNER France S.A.R.L.Immeuble Le ColoradoERAGNY PARCRue Rosa LuxembourgParc d'affaires des BellevuesF-95610 ERAGNY sur OISETel. +33 (0) 1 39 09 90 90Fax +33 (0) 1 39 09 90 [email protected]
Hong KongImperial Engineers &Equipment Co. Ltd.Unit B 12th FloorCheung Lee Industrial Building9 Cheung Lee StreetHK-Chaiwan, Hong KongTel. +8 52/28 89 02 92Fax +8 52/28 89 18 [email protected]
HungaryEUCHNER Ges.mbHMagyarországi FióktelepH-2045 TörökbálintTópark Ipari park 3301/28Feketerét u. 1.Tel. +36/23/428 374Fax +36/23/428 [email protected]
IndiaTeknic Controlgear PVT Ltd.703, Madhava,Bandra Kurla ComplexBandra EastIND-Mumbai 400051Tel. +91-80-23 61 9348
+91-80-23 61 7867Fax +91-80-23 61 [email protected]
IranINFOCELL IRAN Co.# 84, Manoucheri Ave.,P.O. Box 81655-861, Isfahan, IRANTel. +98 311 221 1358Fax +98 311 222 [email protected]
ItalyTRITECNICA S.r.l.Viale Lazio 26I-20135 MilanoTel. +39 02 54 194-1Fax +39 02 55 01 04 [email protected]
SloveniaSMM d.o.c.Production Systems Ltd.Jaskova 18SLO-2001 MariborSloveniaTel. +386 (0)2 450 23 26Fax +386 (0)2 462 51 [email protected]
SpainEUCHNER, S.L.Gurutzegi 12 - Local 1Polígono BelartzaE-20018 San SebastiánTel. +34 (9 43) 31 67 60Fax +34 (9 43) 31 64 [email protected]
SwedenCensit ABBox 331S-33123 VärnamoTel. +46 (0) 3 70 69 10 10Fax +46 (0) 3 70 188 [email protected]
SwitzerlandEUCHNER AGIng.- und VertriebsbüroGrofstraße 17CH-8887 Mels/St. GallenTel. +41 (0) 81 7 20 45 90Fax +41 (0) 81 7 20 45 [email protected]
TaiwanDaybreak International(Taiwan) Corp.3 Fl., 124 Chung-Cheng RoadShihlinTaipei, TaiwanTel. +8 86 (0) 2 8 866 1231Fax +8 86 (0) 2 8 866 [email protected]
TurkeyPINAR MÜHENDISLIK SAN.ve Tic. Ltd. Sti.Perpa Tic. MerkeziKat. 11, No. 1705TR-80270 Okmeydani/lstanbulTel. +90 (0) 2 12 2 20 02 77Fax +90 (0) 2 12 2 20 13 [email protected]
United KingdomEUCHNER (U.K.) Ltd.Unit 2, Petre Drive,GB-Sheffield, S4 7PZTel. +44 (0) 1 14 2 56 01 23Fax +44 (0) 1 14 2 42 53 [email protected]
USAEUCHNER USA Inc.6723 Lyons St.USA-E. Syracuse, NY 13057Tel. +1 (3 15) 7 01-03 15Fax +1 (3 15) 7 01-03 [email protected]
´´
. .
.
ˆˆ
ˆ
ˆ
35
wwwwwwwwwwwwwww.....euceuceuceuceuchnerhnerhnerhnerhner.....cccccomomomomom
HeHeHeHeHeaaaaad officd officd officd officd officeeeee
EUCHNER GmbH + Co. KGKohlhammerstraße 16D-70771 Leinfelden-EchterdingenGermanyTel. +49/7 11/75 97-0Fax +49/7 11/75 33 [email protected]
More than safety. More than safety. Morthan safety. More than safety. More thansafety. More than safety. More than safeMore than safety. More than safety. Morthan safety. More than safety. More thansafety. More than safety. More than safeMore than safety. More than safety. Morthan safety. More than safety. More thansafety. More than safety. More than safeMore than safety. More than safety. Morthan safety. More than safety. More thansafety. More than safety. More than safeMore than safety. More than safety. Morthan safety. More than safety. More thansafety. More than safety. More than safeMore than safety. More than safety. Morthan safety. More than safety. More thansafety. More than safety. More than safeMore than safety. More than safety. Morthan safety. More than safety. More thansafety. More than safety. More than safeMore than safety. More than safety. Morthan safety. More than safety. More thansafety. More than safety. More than safeMore than safety. More than safety. Morthan safety. More than safety. More thansafety. More than safety. More than safeMore than safety. More than safety. Morthan safety. More than safety. More thansafety. More than safety. More than safeMore than safety. More than safety. Morthan safety. More than safety. More thansafety. More than safety. More than safeMore than safety. More than safety. Morthan safety. More than safety. More thansafety. More than safety. More than safeMore than safety. More than safety. Morthan safety. More than safety. More thansafety. More than safety. More than safeMore than safety. More than safety. Morthan safety. More than safety. More thansafety. More than safety. More than safeMore than safety. More than safety. Morthan safety. More than safety. More thansafety. More than safety. More than safeMore than safety. More than safety. Mor
More than safety.than safety. Moresafety. More thanMore than safety.than safety. Moresafety. More thanMore than safety.than safety. Moresafety. More thanMore than safety.than safety. Moresafety. More thanMore than safety.than safety. Moresafety. More thanMore than safety.than safety. Moresafety. More thanMore than safety.than safety. Moresafety. More thanMore than safety.than safety. Moresafety. More thanMore than safety.than safety. Moresafety. More thanMore than safety.than safety. Moresafety. More thanMore than safety.than safety. Moresafety. More thanMore than safety.than safety. Moresafety. More thanMore than safety.than safety. Moresafety. More thanMore than safety.than safety. Moresafety. More thanMore than safety.than safety. Moresafety. More thanMore than safety.
Automation
Safety
ManMachine