portrayal standard for mgcp data

DGIWG - 109

DGIWG Portrayal Standard for Multinational Geospatial Co-production Program (MGCP) Data

Document Identifier: STD-DP-09-048-Portrayal_Standard_for _MGCP_Data

Publication Date: 17 December 2009

Edition: 1.0.0

Edition Date: 17 November 2009

Responsible Party: DGIWG

Audience: Approved for public release

Abstract: Defines symbols and portrayal rules to portray a topographic map using MGCP data

Copyright: (C) Copyright DGIWG, some rights reserved - (CC) (By:) Attribution

You are free: - to copy, distribute, display, and perform/execute the work - to make derivative works - to make commercial use of the work Under the following conditions: - (By:) Attribution. You must give the original author (DGIWG)

credit. - For any reuse or distribution, you must make clear to others the

license terms of this work. Any of these conditions can be waived if you get permission from the

copyright holder DGIWG. Your fair use and other rights are in no way affected by the above. This is a human-readable summary of the Legal Code (the full license

is available from Creative Commons <http://creativecommons.org/licenses/by/2.0/ >).

DN: 09-048 17 November 2009

2

Contents Paragraph Page 1 Introduction ........................................................................................................................... 42 Scope ................................................................................................................................... 43 Conformance ........................................................................................................................ 44 Normative references ............................................................................................................ 45 Terms and definitions ............................................................................................................ 56 Symbol Requirements ........................................................................................................... 7

6.1 MGCP Symbols .................................................................................................................................86.1.1 Symbol Information .......................................................................................................................86.1.2 Symbol Graphic .......................................................................................................................... 106.1.3 Symbol Portrayal Rules .............................................................................................................. 116.1.4 Colour ......................................................................................................................................... 226.2 MGCP 50K Label Information ......................................................................................................... 236.3 Text Characteristics ........................................................................................................................ 246.3.1 Type Placement ......................................................................................................................... 246.3.2 Type Font ................................................................................................................................ ... 25

MGCP Symbols ....................................................................................................................... A-1Colour ...................................................................................................................................... B-1MGCP50K Label Information ................................................................................................... C-1Text Characteristics ................................................................................................................. D-1Area Elements ......................................................................................................................... E-1Line Elements ........................................................................................................................... F-1Point Elements ........................................................................................................................ G-1Detailed Drawing Instructions .................................................................................................. H-1Patterns ..................................................................................................................................... I-1Conformance ............................................................................................................................ J-1Additional information .............................................................................................................. K-1

DN: 09-048 17 November 2009

3

List of Tables Table Page

Table 1 – SWISS742 to Zurich Font Mapping 16

List of Annexes

Page Annex A – MGCP Symbols A-1 Annex B – Colour B-1 Annex C – MGCP 50K Label Information C-1 Annex D – Text Characteristics D-1 Annex E – Area Elements E-1 Annex F – Line Elements F-1 Annex G – Point Elements G-1 Annex H – Detailed Drawing Instructions H-1 Annex I – Patterns I-1 Annex J – Conformance J-1 Annex K – Additional Information K-1 Index L-1

DN: 09-048 17 November 2009

4

1 Introduction

Multinational Geospatial Co-production Program (MGCP) is a multinational program to collect geospatial data worldwide, concentrating on areas where little data currently exists. The MGCP data is collected in accordance with the criteria established in the MGCP Technical Reference Document (TRD). The MGCP is focused on data collection rather than portrayal of that data. This DGIWG standard is intended to provide portrayal requirements for MGCP data that can be used to produce a topographic line map. The portrayal rules that associate geospatial feature/attribute data instances with symbol specifications are based on the MGCP Feature Catalogue. The symbol specifications defined in this standard provide information about symbol graphics that vendors can implement in their own systems.

2 Scope

The scope of this standard is to provide portrayal rules and portrayal specifications for features in the MGCP Feature Catalogue. Selected attribute information on these features must also be portrayed. Portrayal information consists of portrayal rules (which associate data to symbols) and symbol specifications (that define symbols).

3 Conformance

This clause discusses conformance to the MGCP Symbology Standard. See Annex J for the checklist of normative conformance.

4 Normative references

This document references several other documents for additional information:

a. Multinational Geospatial Co-production Program (MGCP) Technical Requirements Document (TRD)

b DGIWG Feature Data Dictionary (DFDD)

Copies of the document are available from https://www.dgiwg.org/FAD/

c MIL-STD-2402, Mapping, Charting, and Geodesy (MC&G) Symbols for Graphic Products.

d. MIL-STD-2410, Mapping, Charting, and Geodesy (MC&G) Reproduction and Printing

e. MIL-T-89301A, 1:50,000 Scale Topographic Maps

Copies of these documents are available from: http://assist.daps.dla.mil/quicksearch/ f. Pantone Colours Information on Pantone colours are available at http://www.pantone.com

http://www.pantone.com/�

DN: 09-048 17 November 2009

5

5 Terms and definitions

Attribute A characteristic of a feature. Area - Fill A fill screen or pattern imprinted within an area feature. Area - Pattern

A unique and continuous graphic pattern depicted within an area feature. Area patterns applicable to this standard are defined in MIL-STD-2410.

Arrow A symbol or component of a symbol indicating direction, or a vector.

Cap

A unique symbol appended to a basic square, circle or rectangle that indicates a specific function or property.

Casing

Two parallel lines representing a linear feature. Colour The quality of an object or substance with respect to light reflected by the object, usually

determined visually by measurement of hue, saturation, and brightness of the reflected light; saturation or chroma; hue.

Colour Token

A name by which a colour is known. Colour tokens are associated with different colours optimized for the viewing condition, such as red light readable, or blue-green light readable.

Dash Spacing

The distance between two consecutive dashes. Default Portrayal The symbol to be applied to a feature/delineation if no portrayal rule evaluates to be true

for that feature instance. Distance between lines/line spacing

Distance measured from closest edges of two lines. Feature

An abstraction of a real world phenomenon. Fill

The appropriate colour or pattern existing within or overprinting the symbol. Information box/facility box A permanent box that is printed on the product and contains a variety of information. The

box height and width will vary in size to accommodate varying text information.

DN: 09-048 17 November 2009

6

Label Labels consist of a variety of terminology and abbreviations, descriptive, or identifying, that are either free-standing (geographic names, text description), or directly associated with a graphic symbol (point, line, area). A label box, or “window” directly around an attribute code, i.e., NAM on the symbol graphic indicates that variable text is required in that position, when known.

Lower case

All letters of a word or words are in lower case text. All numbers are considered lower case text in this standard.

Leader line

A line leading from a location point or symbol to the supporting information or text label. Lineweight

The thickness of a line (in millimeters) measured between outside edges. Line Fill

A fill screen imprinted between the bounding lines of a cased line symbol. Line Style

A group of parameters (e.g. line weight, colour, dash length, dash spacing) which defines the appearance of the symbology (or portion of a symbology) applied to a linear element.

Mixed case

The first letter in the first word entry is a capital letter, followed by all lower case text. Open square

An unfilled square whose dimensions are measured across the square, outside perimeter edge to outside perimeter edge.

Origin (of symbol) The place on a symbol that corresponds to the geographic location of the object it

represents. Perimeter

The limits of an areal feature as centred on the peripheral edge of that feature. Portray Nothing A portrayal rule for the unique case where a feature included in a dataset is not to be

portrayed. The symbol specification is null. Portrayal

The presentation of information to users. Portrayal catalogue

A collection of all defined portrayals. Portrayal rule

A rule that is applied to the feature to determine which portrayal specification to use. Portrayal specification

DN: 09-048 17 November 2009

7

A collection of operations applied to the feature instance to portray it. Screen

A regular pattern of dots, defined by a predetermined percentage (100% being solid) used to create tones of a given colour.

Shape

A unique graphic symbol with a fixed geometry and used primarily for point features. Shape specifications are defined in Annex H.

Symbol

An object that represents information. Symbol element

A component of a symbol. A symbol can be comprised of one symbol element or multiple symbol elements.

Symbol parameter

Basic drawing instructions needed to construct the symbol graphic. Tick

A short line located at specific intervals along a linear symbol and normally positioned perpendicular to that line.

Tick interval

Distance between the centres of each repeating tick or set of ticks along a line. Tick spacing

Distance between the centres of each tick in a set of two or more ticks. Type

The letters, numbers, diacritics, etc, associated with labels. Type size

The size of type, measured in point size. Type style

Specifications on capitalization, and appearance of the type, such as normal, light, bold, italic and condensed.

Upper case

All letters of a word or words are in capital letters. Wing tick

A short angular tick located at the endpoint of a linear or point symbol.

6 Symbol Requirements

This standard provides a comprehensive listing of symbols for the portrayal of Multinational Geospatial Co-production Program (MGCP) data on topographic maps. The portrayal information is presented in Annex A. Subsequent Annexes provide additional supporting information and are described in the following sections.

DN: 09-048 17 November 2009

8

6.1

MGCP Symbols

This Annex provides the majority of the symbol portrayal information including symbol parameter definitions, portrayal rules, and indications of labeling requirements. The Symbol Information section contains the detailed parameters of the symbol graphic while the Symbol Portrayal Rules section provides the rule criteria necessary to support the symbol selection. The information is organized alphabetically based on the MGCP Feature Name and then further ordered within each feature grouping by delineation (i.e. Area, Line, Point). The Index provides a cross reference of Feature Code to Feature Description.

6.1.1

Symbol Information

The Symbol Information section describes in detail the symbol graphic elements. Included is a graphic representation, descriptive name, placement instructions, an indication whether labeling is required (yes/no), element parameters including dimension information, colour, etc. as well as details regarding how the symbol is constructed as a group. The Apply Label to Symbol? field contains either Yes or No value. A No value indicates that the symbol instance does not require any label to be placed. A Yes value indicates that this symbol is a candidate for labeling. The label information can be found by referencing the Feature Name and Rule Reference in Annex C Label Information. A symbol may be composed of one or more symbol elements. For each symbol element, the following information is provided.

• Element Name - A short, descriptive name for the symbol graphic. • Element Reference – A unique element identifier for each symbol in the MGCP Symbol

Standard. • Element Type – Identifies whether the symbol is an area, line, or point symbol. The

types may be further detailed as Line-Complex, Point-Simple, etc. Descriptions of these element types are provided in subsequent paragraphs.

• Description – A textual description of the symbol. • Colour Token – A name describing the colour to apply to the symbol element. • Parameters – The specifications for the symbol element. Specific information is

dependent on what type of symbol element is involved. The Parameters section provides the basic instructions needed to construct the symbol graphic. These parameters are specified at the element level. The following standard element parameters are used to specify the various elements of the symbol graphic. Point – Simple

• Line Weight • Length • Diameter • Headline • Wingtick • Orientation • Note

DN: 09-048 17 November 2009

9

Point – Shape – See Annex H for detailed drawing instructions for shapes • Detail • Note

Point – Complex • Point 1 Name • Point 2 Name • Note

Line – Simple • Line Weight • Note

Line – Styled • Line Weight • Dash Length • Dash Spacing • Dash2 Length • Dash2 Spacing • Dash3 Length • Dash3 Spacing • Note

Line – Complex • Line Style • Line Style 2 • Line Style 3 • Line Style 4 • Fix at Start • Fix at Centre • Fix at End • Repeating Point • Repeating Point Interval • Repeating Point 2 • Repeating Point 2 Interval • Repeating Point 3 • Repeating Point 3 Interval • Repeating Point 4 • Repeating Point 4 Interval • Note

Area – Fill • Screen Angle • Note

Area – Pattern • Colour Token • Area Pattern • Note

Area – Complex • Area Pattern 1 • Area Pattern 2 • Note

DN: 09-048 17 November 2009

10

6.1.2

Symbol Graphic

Sample Symbol Information and drawing instructions from Annex A

Each symbol in this standard is shown with a graphic. The graphic is intended to give a general representation of the symbols appearance in order to aid in understanding the drawing instructions in the symbol parameters. Many of the graphics are shown in an enlarged size compared to what would appear on a topographic map, to make the components of the symbol graphic more visible. Implementers of this standard should develop symbols based on the specifications provided in the symbol parameters, NOT the appearance or size of the symbol graphic. The line patterns and area patterns shown in this standard are also only approximations. Refer to MIL-STD-2410 for examples of actual line and area patterns.

Sample default symbol from Annex A

For each feature class, a default (or “catch-all”) symbol has been identified with a green checkmark in the symbol graphic box ( ). A default (or “catch-all”) symbol has been identified so that all instances of a given feature class delineation will be symbolized even if their attribution is insufficient to meet the portrayal criteria.

Sample symbol portrayal rule from Annex A

In the case where the attribution does not meet any of the criteria defined in the portrayal rules, the default symbol will be applied. There are a number of symbols in the MGCP Symbology Standard which serve as both a default symbol and a symbol which is applied based upon

DN: 09-048 17 November 2009

11

attribute values. In these cases, rather than repeat a symbol definition in the standard multiple times, the default symbol’s portrayal rule will have a criterion. In this situation, the feature class instance will be symbolized with the symbol if its attribute values match the portrayal rule criterion or if no attribute criteria are met it will receive the default symbol. Note: It is anticipated that individual requirements will dictate whether or not a “catch-all” symbol will be utilized on a particular implementation. The green check mark indicates the symbol to be used as a default symbol if one is desired.

6.1.3

Symbol Portrayal Rules

Sample symbol portrayal rule from Annex A

The Symbol Portrayal Rules section directly follows the Symbol Information parameters in the Annex and provides the portrayal rule information for the selection of the preceding symbol graphic. Portrayal rules are rules that indicate the condition in which the symbol is selected. They associate an instance of geospatial data with a particular symbol. In some cases the Criteria column is intentionally blank. In other cases, the Criteria column is populated indicating that specific attribute conditions are required for that particular symbol to be associated with a particular feature instance.

Sample symbol portrayal rule from Annex A (empty Criteria column)

When a feature delineation has more than one possible symbol (e.g. linear roads, point buildings, etc.), then more than one rule will exist for the feature delineation. A feature instance should match one and only one criterion, if no matches are found then the feature instance will receive the default symbol described in the previous section. Attributes included in the Criteria field are based on the MGCP TRD and appear in all upper case. The Definitions of the features and attributes in the MGCP TRD are based on the DGIWG Feature Data Dictionary (DFDD).

DN: 09-048 17 November 2009

12

Sample of multiple symbols and rules for a feature class from Annex A

In some cases non-MGCP feature classes (e.g. Elevation Contour, Spot Elevation, International Date Line, etc.) and non-MGCP attributes (e.g. Hypsography Portrayal Type, Elevation Surface Category, Accuracy (Spot Elevation)) have been included in the MGCP Symbology Standard. These additional features and/or attributes were specifically requested to be included in order to improve the quality of the Topographic map. When these additional, non-MGCP features and/or attributes have been included, a descriptive name and/or value has been used since a specific data model was not available. It is expected that the feature class name and/or attribute names and possible values will need to be updated by an implementer in order to match the data model containing the non-MGCP data. The syntax utilized in the portrayal rule is based on the Structured Query Language (SQL) and thereby is easily interpreted by implementation software applications. The symbol portrayal parameters are defined as follows:

• Product – Product code associated with the portrayal rule, in this case 1:50,000 scale MGCP.

• Feature – The feature code and delineation associated with the portrayal rule as specified by the MGCP TRD. The feature code is prefixed by “A”, “L”, or “P” indicating an area feature, line feature, or point feature respectively.

• Rule Reference – Static Unique identifier associated with the rule. Used to link the entry to entries in other Annexes.

• Description – Textual description of the portrayal rule.

DN: 09-048 17 November 2009

13

• Criteria – Attribute information that identifies the specific symbol. This combined with the feature and delineation associate a particular symbol to an instance of MGCP geospatial data.

The Symbol Rule Criteria is based on SQL syntax. Attribute names are indicated by all upper case text such as FUN, GAW, GLT, etc. Operators are generally defined as follows:

= is equal <> is not equal > greater than < less than >= greater than or equal <= less then or equal is Null attribute is not populated

Other syntax operators

( ) used to group like attributes or indicate precedence or indicates true if at least one of the conditions is true and indicates true if all conditions are true

DN: 09-048 17 November 2009

14

Sample To help further explain the portrayal rule processing, the following sample use cases have been developed. Case 1: Linear river feature (BH140) with the HYP (Hydrologic Persistence) attribute set to 1 (Perennial) Attributes used in symbol portrayal rule: HYP

HYP Attribute (Mandatory for Linear delineation): 0 Unknown 1 Perennial 2 Intermittent 4 Dry

Symbol Portrayal Rules: LN_Cyan_River_Perennial (Default) HYP = 1 LN_Cyan_River_Non-Perennial HYP <> 1

Processing:

LBH140

HYP = 1

Symbolize with LN_Cyan_River_Perennial & remove from further symbolization consideration

Yes HYP = 1 ?

No

Symbolize with LN_Cyan_River_Non-perennial & remove from further symbolization consideration

DN: 09-048 17 November 2009

15

Does HYP = 1? Yes, then symbolize with the LN_Cyan_River_Perennial symbol and remove feature instance from further symbolization consideration;

Case 2: Area crop land feature (EA010) with the CSP (Crop Species) attribute set to 16 (Grape) and the PPO (Product) attribute set to 999 (Other) Attributes used in symbol portrayal rule: CSP, PPO

CSP Attribute (Optional for Area delineation): PPO Attribute (Optional for Area delineation): 0 Unknown 0 Unknown 13 Dry Crop 7 Banana 15 Fruit Tree 20 Coffee 16 Grape 28 Cotton 18 Hop 44 Fruit 999 Other 79 Palm

94 Rubber 111 Sugar 117 Tobacco 999 Other

Symbol Portrayal Rules: AR_Green362-7_Cropland_DryCrops (Default) CSP = 13

AR_Green362_Cropland_Orchard (CSP = 15) or (PPO = 7 or PPO = 20 or PPO = 28 or PPO = 44 or PPO = 79 or PPO = 94 or PPO = 111 or PPO = 117)

AR_Green362_Cropland_Vineyard (CSP = 16 or CSP = 18)

DN: 09-048 17 November 2009

16

AEA010

CSP = 16 PPO = 999

Symbolize with AR_Green362-7_Cropland_DryCrops & remove from further symbolization consideration

Yes CSP = 13?

No

(CSP = 15) or (PPO = 7 or PPO = 20 or PPO = 28 or PPO = 44 or PPO = 79 or PPO = 94 or PPO = 111 or PPO

= 117)?

No

Yes Symbolize with AR_Green362_Cropland_Orchard & remove from further symbolization consideration

CSP = 16 or CSP =

18?

Yes Symbolize with AR_Green362_Cropland_Vineyard & remove from further symbolization consideration

No Symbolize with default symbol AR_Green362_Cropland_DryCrops & remove from further symbolization consideration

DN: 09-048 17 November 2009

17

Processing: - Does CSP = 13? No, then check next rule. - Does (CSP = 15) or (PPO = 7 or PPO = 20 or PPO = 28 or PPO = 44 or PPO = 79 or PPO = 94 or PPO = 111 or PPO = 117)?

No, then check next rule. - Does (CSP = 16 or CSP = 18)? Yes, then symbolize with AR_Green362_Cropland_Vineyard and remove feature instance from

further symbolization consideration. Case 3: Area wood feature (EC030) with the DMT (Canopy Cover) attribute unpopulated (Null) and the TRE (Foliage Type) attribute set to 0 (Unknown) and the VSP (Vegetation Species) attribute set to 0 (Unknown). Attributes used in symbol portrayal rule: DMT, TRE, VSP

DMT Attribute TRE Attribute VSP Attribute (Optional for Area delineation): (Mandatory for Area delineation): (Mandatory for Area delineation):

Percentage of canopy cover 0 Unknown 0 Unknown 1 Deciduous 4 Casuarina 2 Coniferous 6 Conifer 3 Mixed 8 Cypress 998 Not Applicable 10 Eucalyptus 11 Filao

19 Mangrove 22 Nipa 25 Palm 999 Other Symbol Portrayal Rules:

DN: 09-048 17 November 2009

18

AR_Green362-31_Woodland_Evergreen (Default) (DMT >= 51) and (TRE = 2) and (VSP = 4 or VSP =25 or VSP = 11 or VSP = 8 or VSP = 999 or VSP = 10)

AR_Green362-31_Woodland_Deciduous (DMT >= 51) and (TRE = 1) AR_Green362-31_Woodland_Mixed (DMT >= 51) and (TRE = 3) AR_Green362_Woodland_ScatteredTrees (DMT>=25 and DMT<51) and (VSP<>19 and VSP<>22) AR_Green362_Mangrove (TRE = 2) and (VSP = 19) AR_Green362_NipaPalm (TRE = 2) and (VSP = 22)

DN: 09-048 17 November 2009

19

Symbolize with AR_Green362-31_Woodland_Evergreen & remove from further symbolization consideration

DMT >= 51 and (TRE = 1)?

No

Yes (DMT >= 51) and (TRE = 2) and (VSP = 4 or VSP =25 or VSP = 11 or VSP = 8 or VSP = 999 or VSP = 10)?

Symbolize with AR_Green362-31_Woodland_Deciduous & remove from further symbolization consideration

Symbolize with AR_Green362-31_Woodland_Mixed & remove from further symbolization consideration

Yes

No

AEC030

DMT = Null TRE = 0 VSP = 0

DMT >= 51 and (TRE = 3)?

Yes

No

DN: 09-048 17 November 2009

20

DMT >= 25 and DMT < 51) and (VSP <> 19 and VSP

<> 22)?

No

Symbolize with AR_Green362_Woodland_ScatterredTrees & remove from further symbolization consideration

TRE = 2 and VSP = 19?

Symbolize with AR_Green362_Woodland_Mangrove & remove from further symbolization consideration

Yes

No

TRE = 2 and VSP = 22?

Symbolize with AR_Green362_Woodland_NipaPalm & remove from further symbolization consideration

Yes

No Symbolize with default symbol AR_Green362-31_Woodland_Evergreen & remove from further symbolization consideration

No

Yes

DN: 09-048 17 November 2009

21

Processing: - Does (DMT >= 51) and (TRE = 2) and (VSP = 4 or VSP =25 or VSP = 11 or VSP = 8 or VSP = 999 or VSP = 10)? No, then check

next rule. - Does DMT >= 51 and (TRE = 1)? No, then check next rule. - Does DMT >= 51 and (TRE = 3)? No, then check next rule. - Does DMT >= 25 and DMT < 51) and (VSP <> 19 and VSP <> 22)? No, then check next rule. - Does TRE = 2 and VSP = 19? No, then check next rule. - Does TRE = 2 and VSP = 22? No, then since last rule and no matches were found, symbolize with defined default symbol

(AR_Green362-31_Woodland_Evergreen).

DN: 09-048 17 November 2009

22

Do Not Portray Certain features in the MGCP dataset are not intended to be portrayed on the MGCP50K product. These include:

• AA052 Hydrocarbon Field • AL080 Gantry • AP020 Road Interchange • AQ045 Bridge Span • BB008 Harbour Waters • BC070 Light Vessel • BI041 Water Gate • DB200 Gully • GA035 Aeronautical Navaid • GB045 Stopway

6.1.4

Colour

A particular symbol may be one colour, or composed of multiple colours. Labels are generally specified in one colour. Colours can be specified using several methodologies.

• U.S. Department of Defense Standard Printing Color Catalog for Mapping, Charting, Geodetic Data and Related Products, referred to as “SPC” is a methodology used in the U.S DOD to specify spot colours, which are unique mixtures of inks. MIL-STD-2402 uses SPC colour specifications.

• Pantone colours – Pantone colours are commonly used in the printing industry and are

based on specific mixes of inks. They are sometimes referred to as “spot” colours. Each pantone colour has an identifier assigned to it.

• CMYK – Identifies the percentage of Cyan, Magenta, Yellow and Black (key) that is used

to generate a specific colour in process lithographic printing. Process printing allows a wide variety of colours to be produced from these three primary colours and the black.

• RGB – Red, Green, Blue is a common methodology for specifying colours on digital

displays, giving the intensity of the respective colour guns on a CRT monitor. Each colour intensity ranges from 0 to 255. Colour is additive, so 0 is no colour, and 255 is maximum colour.

The Colour Token definitions utilized for this standard are provided in Annex B. This Annex provides a mapping from a specific colour token to Pantone colour names, the MIL-STD-2402 based SPC Ink colours, CMYK and RGB values. This mapping allows considerable flexibility in specifying equivalent colours in a variety of methodologies. Colour tokens are used to specify generic names of colours for symbol elements. Colour tokens can be replaced with different tokens if maps for different viewing conditions are needed. For example, different viewing conditions may be red light readable, or blue/green light readable. The use of a Colour Token methodology provides for the greatest degree of flexibility at

DN: 09-048 17 November 2009

23

implementation to provide for an easy adaptation to various colour needs. It further allows for colours to be defined by the software applications as necessary to fulfill product requirements. Colours in Annex A and Annex D are specified for each symbol element by Colour Token. Annex B provides a listing of Pantone colours, CMYK values and RGB values that are applicable to MGCP 50K product. The colour token values used in this Standard can be mapped to this table to determine the CMYK and RGB values. When MGCP member nations exchange digital files of finished map products in Portable Document Format (PDF), it is important to note that specifying colours using the spot colour channels in the PDF allows for much greater flexibility in the lithographic printing of the map. If colours are specified only in CMYK, then four-colour process printing is the only printing option available and printing for red or green light readability may not be possible.

6.2

MGCP 50K Label Information

Labeling can be used to identify or assist in identification of the meaning of symbols, and also may supply additional information about the feature being portrayed. Labeling requirements for symbols are identified in the symbol specification. Labels can be of the following types:

• Fixed label – the symbol has a label, and the content of the label is fixed, for example, the label “Ferry” on a ferry crossing, or “Transformer yard” on a power substation.

• Variable label portraying attribute – the content of the label changes, depending on attribute information being portrayed. An example would be showing the mine type [MIN] label on a mine, such as “Open case”, “Placer”, “Strip mine”, etc. Another example would be to show the name of a feature [NAM] as a label, for example, “Olympic Stadium”, or “Central Park”.

• Variable label derived from attribute – the content of a label changes based on the attribute information, but the text of the label is not the attribute value. An example would be a mine type [MIN] of 8 - Peatery being labeled “Peat cuttings”.

• Combination – a series of labels of the various types listed above. The MGCP 50K Label Information section is sorted alphabetically by Feature Name and Rule Reference. This information is product specific. Annex C is structured to accommodate the addition of future products such as MGCP 100K for example. The parameters specified are as follows:

• Rule Reference – Rule Reference link from Annex A. • Description – Textual description of the label. • Additional Labeling Criteria – Criteria to further refine the label placement. • Label string – The content of the label, which can be fixed text, variable label portraying

attribute, varying label derived from attribute, or a combination of these. • Characteristics – A reference to the applicable text description information in Annex D.

This MGCP 50K Label Information Annex identifies the label criteria and label characteristics which are relevant to a particular symbol. The link to Annex A – MGCP Symbols is the Feature Name and Rule Reference. The link from this Annex to Annex D - Text Characteristics is the entry(s) listed in the characteristics column. There is a one to one link from each label element to the Text Characteristics table. For example, if the Label String is [NAM] [FUN] the Characteristics column must have 2 entries separated by a comma (e.g 1,2). These entries may

DN: 09-048 17 November 2009

24

point to the same row in the Text Characteristics Annex or different rows depending on the required characteristic of that label element.

6.3

Text Characteristics

The Text Characteristics table in Annex D contains information specific to the text characters. This information contains colour, size, case, and style parameters. The parameters specified are as follows:

• Text Characteristic # - Reference to link the characteristics to the Label Information in Annex C.

• Colour Token – Colour Token for the text string. • Font Style – Indication of Condensed, Light Condensed, or Regular. • Style – Indication of Bold, Italics or Underline• Font Size – Point (PT) size of the text string.

.

• Case – Indication of capitalization. Valid values are Upper case, Lower case, and Mixed case.

Capitalization of label information on a symbol follows the general structure below:

• The first letter is capitalized, for example, “Ferry”. • For multiple words, the first letter of the first word is capitalized, for example,

“Transformer yard”. • For names, the first letter in each word is capitalized, for example, “Yellowstone National

Park”. Note that in some cases, the text string may have to be modified depending on whether attribute information is portrayed. For example, the label for a bog is [BOC] “bog”, but if the Bog Type (BOC) is unknown or other, it would not make sense to show “Unknown bog” or “Other bog”, and the BOC label would just be omitted. Then the “bog” would be the first word in the label, and should be capitalized “Bog” based on the rules above. Note that some attributes are not intended to be labeled. These include:

• Unknown • Other • Not applicable • ACC=1, Accurate • BST=1, Definite • FUN=6, Fully functional • LOC=44, On Ground Surface • RGA=3, Standard (on railway tracks)

If an attribute is unknown or has not been collected, the label is not shown. Examples of these types of attributes are HGT, GAW, LTN, NAM, TXT, and ZVH.

6.3.1

Type Placement

DN: 09-048 17 November 2009

25

The proper selection and placement of type are of extreme importance, not only to the map user, but also because of the impact on the final appearance of the map. See MIL-T-89301A, 1:50,000 Scale Topographic Maps, section 3.19.12 for information on type placement typically used on topographic maps.

6.3.2

Type Font

The TrueType Zurich font has been selected as the most appropriate font to represent the label information for the MGCP 50K product. The following criteria was considered in selecting the font:

• Format should be TrueType

• Must be compatible with the Windows environment

• Must be similar to Swiss742 fonts specified in the MIL-STD-2402 and MIL-STD-2410 (e.g. compatible with the colours, sizes, styles)

• Cost of the purchase of commercial fonts

• All the diacritic marks must be supported

• Extendable (must be possible to add new characters)

The analysis concluded that the standard should not be too rigid regarding the use of one or another font. Nevertheless, for avoiding problems with the diacritical marks, the best choice is to use commercial fonts of recognized brand. These have Unicode codification and, in general, support all the current idiomatic characters.

Secondly, the analysis included not only TrueType but also OpenType because to choose one font in particular would lead to extra cost depending on the national mapping work flow. Therefore, the standard should be as flexible as possible.

OpenType will likely become the standard in the near future, given that OpenType has greater capabilities in complex writings (languages), extendable and advanced typography (kerning, and so on). However, some national mapping work flows are not yet fully compatible with the OpenType fonts. An example of this is what happens with the PDF/X standard. The fonts used in the document must be embedded in it, including the metric and the codification’s data. Under the 1.6 version, the OpenType fonts are not accepted by the PDF format.

The Swiss742 font is one of the “sans serif” style type. The first step was to look for any commercial font available similar to the Swiss742 being, at least, TrueType specification. The digital format of the font was not available so the MIL-STD-2410 in PDF version was utilized for comparison. The main brands like Bitstream/Corel, Monotype and Linotype were taken into account. Even though the criterion of the MIL-STD-2410 was to choose a single font, it was determined that the output for paper maps is better if a set of diverse fonts is used. These are TrueType fonts and they produce a good balance of functionality and aesthetics.

Nevertheless, on the basis of these, a set of compatible or equivalent fonts can be established, and the producers may use them at will. Conversion tables must be as flexible and extendable as possible. Table 1 Font Mapping provides a mapping from the Swiss742 to Zurich and Univers TrueType fonts.

DN: 09-048 17 November 2009

26

Table 1 – Font Mapping

F ont S tyle To Z uric h B T S tyle To Univers S tyle

Univers® 55

Roman

Italic Italic Roman Oblique

B o ld C ond ensed

Swiss 742

Regular (Medium)

Zurich BT

Bold Bold Univers® 65 Bold

C ondensed C ondensed Univers® 57 Condensed

B o ld C ond ensed Univers® 67 Bold Condensed

L igh t C ondensed L igh t C on den sed

Univers® 47

Light Condensed

L igh t C ondens ed Ita lic L igh t C ondens ed Ita lic Light Condensed Italic

DN: 09-048 17 November 2009

A-1

Annex A – MGCP Symbols (normative)

MGCP Symbols

MGCP symbols and portrayal rules are specified in the Annex. This information is sorted alphabetically by Feature Name. A cross reference to Feature Code and specific page locations are provided in the Index.

MGCP Symbols

DN: 09-048 17 November 2009

Administrative Boundary (Administrative Boundary)Line

Symbol Information

Apply Label to Symbol: Yes

Symbol Graphic Name: LN_Black_AdminBoundary Symbol Graphic

Symbol Placement Instructions: The linear symbology is applied to the geometry of the feature.

ü

Description: Black 0.2mm Dash Line (0.2mm wt, 6.1mm dash, 2.5mm gap) with 0.25mm filled dot centred in dash gap

Element Type: Line - Complex Element Reference: L00129Element Name: Black_AdminBoundary

Parameters:

Line Style: Black_0.2mm-6.1mmLenDash-2.5mmGapLine

Repeating Point: Black_0.25mmDotFilled

Repeating Point Interval: Dot centred in dash gap

Colour Token: Black

Element Reference: L00128 Element Type: Line - StyledElement Name: Black_0.2mm-6.1mmLenDash-2.5mmGapLine

Description: Black 0.2mm Dash Line (0.2mm wt, 6.1mm dash, 2.5mm gap)

Dash Spacing: 2.5mmDash Length: 6.1mm

Parameters:

Line weight: 0.2mm

Colour Token: Black

Element Reference: P00047 Element Type: Point - SimpleElement Name: Black_0.25mmDotFilled

Description: A black filled 0.25mm diameter circle (dot)

Colour Token: Black

Diameter: 0.25mm

Parameters:

Product Feature Rule Reference Description Criteria

MGCP50K Administrativ

e Boundary

R000311 Administrative Boundary / other (line) (Geopolitical Line Type <> International and

Geopolitical Line Type <> Armistice and Geopolitical

Line Type <> Cease-Fire)


A - 2ü indicates that the symbol is to be used as the default (or "catch all") symbol for the feature class.

DN: 09-048 17 November 2009Administrative Boundary (Administrative Boundary) (continued)

Line

Symbol Information


Symbol Graphic Name: LN_Dk-Brown1815_AdminBoundary_International Symbol Graphic


Element Name: Dk-Brown1815-54_International-Boundary Element Reference: L00124 Element Type: Line - Complex

Description: Black 0.5mm Dash Line (0.5mm wt, long dash 7.0mm, short dash 2.0mm; 1 long / 2 shorts) Dk-Brown1815-54 2mm 60 degree overprint

Colour Token: Dk-Brown1815-54 Parameters:

Line Style: Black_0.5mm-7mmDash-2x2mmDashLine

Line Style 2: Dk-Brown1815-54_2.0mmScreenedLine

Note: Dk-Brown1815-54 overprint is centred on dashed line. Black Dashed line sequence is 1 long dash

followed by 2 short dashes.

Element Name: Black_0.5mm-7mmDash-2x2mmDashLine Element Reference: L00122 Element Type: Line - Styled

Description: Black 0.5mm Dash Line (0.5mm wt, long dash 7.0mm, short dash 2.0mm)


Parameters:

Line Weight: 0.5mm

Colour Token: Black

Dash2 Length: 2.0mm Dash2 Spacing: 1.0mm

Note: 2 short dashes follow 1 long dash

Element Name: Dk-Brown1815-54_2.0mmScreenedLine Element Reference: L00123 Element Type: Line - Simple

Description: Dk-Brown1815-54 2mm Solid Line (2.0mm wt. 60 degree screen angle)


Line Weight: 2.0mm

Screen Angle: 60 degrees



e Boundary

R000309 Administrative Boundary / international

(line)

(Geopolitical Line Type = International)


A - 3

DN: 09-048 17 November 2009Administrative Boundary (Administrative Boundary) (continued)

Line

Symbol Information


Symbol Graphic Name: LN_Dk-Brown1815_AdminBoundary_Armistice Symbol Graphic


Element Name: Dk-Brown1815-42_ArmisticeLine-Boundary Element Reference: L00127 Element Type: Line - Complex

Description: Black 0.3mm Dash Line (0.3mm wt, 5.0mm dash; 1.0mmgap) Dk-Brown1815-42 2.0mm 60 degree overprint


Line Style: Black_0.3mm-5mmLenDash-1.0mmGapLine

Line Style 2: Dk-Brown1815-42_2.0mmScreenedLine

Note: Dk-Brown1815-42 overprint is centred on dashed line.

Element Name: Black_0.3mm-5mmLenDash-1.0mmGapLine Element Reference: L00125 Element Type: Line - Styled


Colour Token: Black Parameters:

Line Weight: 0.3mm Dash Length: 5.0mm Dash Spacing: 1.0mm

Element Name: Dk-Brown1815-42_2.0mmScreenedLine Element Reference: L00126 Element Type: Line - Simple

Description: Dk-Brown1815-42 2mm Screened Solid Line (60 degree angle)


Line Weight: 2.0mm




e Boundary

R000310 Administrative Boundary / armistice

line (line)

(Geopolitical Line Type = Armistice Line)


Symbol Information


Symbol Graphic Name: LN_Black_AdminBoundary_CeaseFire Symbol Graphic


Element Name: Black_0.25mm-6mmLenDashLine Element Reference: L00121 Element Type: Line - Styled



Line Weight: 0.25mm

Dash Length: 6.0mm

Dash Spacing: 1.0mm



e Boundary

R000308 Administrative Boundary / cease fire

(line)

(Geopolitical Line Type = Cease-Fire)


A - 4

DN: 09-048 17 November 2009Administrative Division (Administrative Division)Area

Symbol Information


Symbol Graphic Name: LN_Black_AdminDivision_Primary Symbol Graphic


ü

Element Name: Black_AdminDivision-Primary Element Reference: L00132 Element Type: Line - Complex

Description: Black 0.3mm Dash Line (0.3mm wt, 7.0mm dash, 1.0mm gap) and Black 0.3mm, 2mm dash, 1.0mm gap



Line Style 2: Black_0.3mm-2mmLenDash-1mmGapLine

Note: Long and short dashes alternate





Element Name: Black_0.3mm-2mmLenDash-1mmGapLine Element Reference: L00131 Element Type: Line - Styled






e Division

R000312 Administrative Division / primary

(area)

(Board of Geographic Names = Primary/1st)


Symbol Information


Symbol Graphic Name: LN_Black_AdminDivision_Secondary Symbol Graphic


Parameters:

Line Weight: 0.3mm

Dash Length: 7.0mm

Dash Spacing: 1.0mm


Element Name: Black_0.3mm-7mmLenDash-1.0mmGapLine

Colour Token: Black

Element Reference: L00130 Element Type: Line - Styled



e Division

R000313 Administrative Division / secondary

(area)

(Board of Geographic Names = Second Order)



DN: 09-048 17 November 2009Administrative Division (Administrative Division) (continued)

Area

Symbol Information


Symbol Graphic Name: LN_Black_AdminDivision_Tertiary Symbol Graphic


Description: Black 0.3mm Dash Line (0.3mm wt, 7.0mm dash, 1.5mm gap) and 0.4mm Filled Dot (repeating)

Element Type: Line - Complex Element Reference: L00134Element Name: Black_AdminDivision-Tertiary

Parameters:



Repeating Point Interval: 1.5mm

Colour Token: Black

Note: Sequence is 1 linear dash followed by 3 dots. Gap is 1.5mm between individual dots and between group

of dots and the dash.

Element Reference: L00133 Element Type: Line - StyledElement Name: Black_0.3mm-7mmLenDash-1.5mmGapLine



Parameters:

Line weight: 0.3mm

Colour Token: Black


Description: A 0.4mm diameter black filled circle

Colour Token: Black

Diameter: 0.4mm

Parameters:



e Division

R000314 Administrative Division / tertiary (area) (Board of Geographic Names = Third Order)


Aerodrome (GB005)Area

Symbol Information


Symbol Graphic Name: AR_Black_Aerodrome Symbol Graphic

Symbol Placement Instructions: The dashed line is placed around the perimeter of the feature

ü

Parameters:

Line Weight: 0.2mm

Dash Length: 2.0mm

Dash Spacing: 0.5mm



Colour Token: Black



MGCP50K AGB005 R000108 Aerodrome / all (area)



DN: 09-048 17 November 2009Air Obstruction (GB220)Point

Symbol Information


Symbol Graphic Name: PT_Blue072_AirObstruction_VO Symbol Graphic

Symbol Placement Instructions: Origin: Centre of dot

ü

Element Type: Point - Shape Element Reference: P00008Element Name: Blue072_Obstruction

Description: A Blue072 vertical obstruction

Colour Token: Blue072 Parameters:

Detail: Blue072_Obstruction

Note: See Element: Blue072_Obstruction in Annex H for detailed drawing instructions.


MGCP50K PGB220 R000283 Air Obstruction / single obstruction

(point)


Symbol Information


Symbol Graphic Name: PT_Blue072_AirObstruction_MultiVOs Symbol Graphic

Symbol Placement Instructions: Use this "multiple vertical obstruction" symbol rather than the Air Obstruction single

VO in areas of congestion or overprinting as directed by product finishing guidance Origin: Centre of dot

Element Type: Point - Shape Element Reference: P00101Element Name: Blue072_Multiple_VOs

Description: A Blue072 shape for VOs which are in congested areas or areas of overprinting


Detail: Blue072_Multiple_VOs

Note: See Element: Blue072_Multiple_VOs in Annex H for detailed drawing instructions.


MGCP50K PGB220 R000460 Air Obstruction / multiple obstructions

(point)

*None



*None = Indicates that the symbol to be placed is at the discretion of the implementer. Generally these are situations that would require user

interaction to determine applicability. No attribute conditions are used in the determination.

DN: 09-048 17 November 2009Aircraft Revetment (GB050)Line

Symbol Information


Symbol Graphic Name: LN_Blue072_AircraftRevetment Symbol Graphic

Symbol Placement Instructions: Symbol is applied to the linear geometry

ü

Parameters:

Line Style: Blue072_0.2mm-4mmLenDash-1mmGapLine

Fix at Start: Blue072_0.2mm-1.0mmwideSquareOpen

Repeating Point: Blue072_0.2mm-1.0mmwideSquareOpen

Repeating Point Interval: 5.0mm such that the square is centred within the Gap and fills the gap.

Colour Token: Blue072

Description: Blue072 open square fixed at the start and repeating along a Blue072 dashed line

Element Name: Blue072_Aircraft_Revetment Element Reference: L00150 Element Type: Line - Complex

Note: The Blue072 open square is centred in the dash gap and completely fills the "gap" in the dashed line.

Element Name: Blue072_0.2mm-4mmLenDash-1mmGapLine

Description: Blue072 Dashed line (0.2mm wt, 4.0mm Dash, 1.0mm Gap)




Note: The Blue072 open square is centred in the dash gap and completely fills the "gap" in the dashed line.

Element Name: Blue072_0.2mm-1.0mmwideSquareOpen Element Reference: P00110 Element Type: Point - Simple

Description: A Blue072 open square (0.2mm wt, 1.0mm long/wide)


Line weight: 0.2mmLength: 1.0mm




Length: 1.0mm Line Weight: 0.2mm


MGCP50K LGB050 R000359 Aircraft Revetment / all (line)



DN: 09-048 17 November 2009Airport Navigation Lights (GB010)Point

Symbol Information

Apply Label to Symbol: No

Symbol Graphic Name: PT_Blue072_AirportNavigationLights Symbol Graphic

Symbol Placement Instructions: Origin: Centre of circle

ü

Element Type: Point - Shape Element Reference: P00025Element Name: Blue072_Beacon

Description: A Blue072 5-pointed filled star with an open circle / hole at the centre of the 5-pointed star


Detail: Blue072_Beacon

Note: See Element: Blue072_Beacon in Annex H for detailed drawing instructions.


MGCP50K PGB010 R000282 Airport Navigation Lights / not strobe

(point)

LFA <> 26


Symbol Information


Symbol Graphic Name: PT_Blue072_AirportNavigationLights_Strobe Symbol Graphic


Element Type: Point - Shape Element Reference: P00025Element Name: Blue072_Beacon




Note: See Element: Blue072_Beacon in Annex H for detailed drawing instructions.


MGCP50K PGB010 R000281 Airport Navigation Lights / strobe

(point)

LFA = 26



DN: 09-048 17 November 2009Amusement Park (AK030)Area

Symbol Information


Symbol Graphic Name: AR_Black_AmusementPark Symbol Graphic

Symbol Placement Instructions: The dashed line is placed around the perimeter of the feature.

ü

Parameters:

Line Weight: 0.2mm

Dash Length: 2.0mm

Dash Spacing: 0.5mm



Colour Token: Black



MGCP50K AAK030 R000360 Amusement Park / all (area)


Apron (GB015)Area

Symbol Information


Symbol Graphic Name: AR_Blue072_Apron Symbol Graphic

Symbol Placement Instructions: The extents of the area geometry is filled with the single colour fill.

ü

Parameters:

Description: Blue072 Solid Fill

Element Type: Area - Fill Element Reference: A00002Element Name: Blue072_SolidFill


Note: Solid Fill


MGCP50K AGB015 R000109 Apron / all (area)



DN: 09-048 17 November 2009Aqueduct (BH010)Line

Symbol Information


Symbol Graphic Name: LN_Cyan_Aqueduct_OnSurfaceFunctional Symbol Graphic


ü

Element Name: Cyan_0.3mmSolidLine Element Reference: L00016 Element Type: Line - Simple

Description: Cyan 0.3mm Solid Line

Colour Token: Cyan Parameters:

Line Weight: 0.3mm


MGCP50K LBH010 R000166 Aqueduct / unknown, or fully functional

/ on surface or unknown (line)

(FUN =0 or FUN = 6) and (LOC = 0 or LOC = 44)


Symbol Information


Symbol Graphic Name: LN_Cyan_Aqueduct_AboveSurface Symbol Graphic


Element Name: Cyan_Aqueduct / Penstock Element Reference: L00106 Element Type: Line - Complex

Description: Cyan 0.3mm Solid Line with 'V' (0.3mm wt, 0.7mm long)

Fix at Start: Cyan_0.3mm-0.7mmLenV

Fix at End: Cyan_0.3mm-0.7mmLenV

Parameters:

Line Style: Cyan_0.3mmSolidLine Colour Token: Cyan

Note: Origin: Apex of 'V' touches line ends with ticks facing away

Element Reference: L00016 Element Type: Line - Simple


Element Name: Cyan_0.3mmSolidLine


Line Weight: 0.3mm

Element Name: Cyan_0.3mm-0.7mmLenV Element Reference: P00062 Element Type: Point - Simple

Description: A Cyan "V". The "V" is 0.7 mm long on each leg and has a line width of 0.3mm.


Line weight: 0.3mm Length: 0.7mm

Orientation: Apex is centred on line ends

Note: Angle between stems: 90 degrees



Colour Token: Cyan

Length: 0.7mm

Parameters:

Line weight: 0.3mm





/ above surface (line)

(FUN = 0 or FUN = 6 ) and (LOC = 45)



DN: 09-048 17 November 2009Aqueduct (BH010) (continued)

Line

Symbol Information


Symbol Graphic Name: LN_Cyan_Aqueduct_BelowGroundUnderConstruction Symbol Graphic


Element Name: Cyan_0.3mm-2mmLenDash-0.5mmGapLine Element Reference: L00043 Element Type: Line - Styled

Description: Cyan 0.3mm Dash Line (0.3mm wt, 2.0mm dash, 0.5mm gap)


Line Weight: 0.3mm

Dash Length: 2.0mm

Dash Spacing: 0.5mm


MGCP50K LBH010 R000167 Aqueduct / under construction,

abandoned, or destroyed / below

ground surface (line)

(FUN = 1 or FUN = 2 or FUN = 3) and (LOC = 40)


Symbol Information


Symbol Graphic Name: LN_Cyan_Aqueduct_BelowGroundFunctional Symbol Graphic





Line Weight: 0.3mm

Dash Length: 2.0mm

Dash Spacing: 0.5mm



/ below ground surface (line)

(FUN = 0 or FUN = 6) and (LOC = 40)


A - 12


Line

Symbol Information


Symbol Graphic Name: LN_Cyan_Aqueduct_OnSurfaceUnderConstruction Symbol Graphic





Line Weight: 0.3mm



abandoned, or destroyed / on surface

or unknown (line)

(FUN = 1 or FUN = 2 or FUN = 3) and (LOC = 0 or

LOC = 44)


A - 13


Line

Symbol Information


Symbol Graphic Name: LN_Cyan_Aqueduct_AboveSurfaceUnderConstruction Symbol Graphic






Parameters:







Line Weight: 0.3mm









Colour Token: Cyan

Length: 0.7mm

Parameters:

Line weight: 0.3mm





abandoned, or destroyed / above

surface (line)

(FUN = 1 or FUN = 2 or FUN = 3) and (LOC = 45)


Point

A - 14


Point

Symbol Information


Symbol Graphic Name: PT_Cyan_Aqueduct_Qanat Symbol Graphic


ü

Element Type: Point - Simple Element Reference: P00057Element Name: Cyan_0.15mmCircleOpen

Description: A Cyan open circle (Line weight is 0.15 mm; Diameter is 1.0 mm)


Diameter: 1.0mm

Line Weight: 0.15mm


MGCP50K PBH010 R000259 Aqueduct / all (point)



DN: 09-048 17 November 2009Archaeological Site (AL012)Area

Symbol Information


Symbol Graphic Name: AR_Black_ArchaeologicalSite Symbol Graphic


ü

Parameters:

Line Weight: 0.2mm

Dash Length: 2.0mm

Dash Spacing: 0.5mm



Colour Token: Black



MGCP50K AAL012 R000025 Archaeological Site / all (area)


Point

Symbol Information


Symbol Graphic Name: PT_Black_ArchaeologicalSite Symbol Graphic

Symbol Placement Instructions: Origin: Centre of open square

ü

Element Type: Point - Simple Element Reference: P00024Element Name: Black_0.1mm-0.8mmwideSquareOpen

Description: A Black open square (0.1mm wt, 0.8mm long/wide)




MGCP50K PAL012 R000218 Archaeological Site / all (point)



DN: 09-048 17 November 2009Beach (BA050)Area

Symbol Information


Symbol Graphic Name: AR_Dk-Brown1815_Beach_Sand Symbol Graphic

Symbol Placement Instructions: The extents of the area geometry is filled with the area fill pattern.

ü

Parameters:

Description: Dk-Brown1815 Sand Fill

Element Type: Area - Pattern Element Reference: A00035Element Name: Dk-Brown1815_SandFill

Colour Token: Dk-Brown1815

Area Pattern: See Element: Dk-Brown1815_SandFill in Annex I

Note: Area Pattern #95


MGCP50K ABA050 R000415 Beach / not pebbles (area) (SMC <> 73)


Symbol Information


Symbol Graphic Name: AR_Dk-Brown1815_Beach_Pebble Symbol Graphic


Parameters:

Description: Dk-Brown1815 Sand and Gravel Fill

Element Type: Area - Pattern Element Reference: A00036Element Name: Dk-Brown1815_SandandGravelFill


Area Pattern: See Element: Dk-Brown1815_SandandGravelFill in Annex I



MGCP50K ABA050 R000416 Beach / pebbles (area) (SMC = 73)


Point


DN: 09-048 17 November 2009Beach (BA050) (continued)

Point

Symbol Information


Symbol Graphic Name: PT_Beach Symbol Graphic

Symbol Placement Instructions: Dynamic text label only. No Graphic Parameters.

ü

POINT LABEL ONLY


MGCP50K PBA050 R000411 Beach / all (point)



DN: 09-048 17 November 2009Berthing Structure (BB190)Area

Symbol Information


Symbol Graphic Name: AR_Black_BerthingStructure_Dry Symbol Graphic

Symbol Placement Instructions: The solid line is placed around the perimeter of the feature.

ü

Parameters:

Line Weight: 0.2mm

Description: Black 0.2mm Solid Line (0.2mm wt)

Element Name: Black_0.2mmSolidLine

Colour Token: Black



MGCP50K ABB190 R000417 Berthing Structure / not submerged

(area)

(WLE <> 3)


Symbol Information


Symbol Graphic Name: AR_Black_BerthingStructure_Submerged Symbol Graphic

Symbol Placement Instructions: The line is placed around the perimeter of the feature

Parameters:

Line Weight: 0.2mm

Dash Length: 1.0mm

Dash Spacing: 0.5mm



Colour Token: Black



MGCP50K ABB190 R000418 Berthing Structure / submerged (area) (WLE = 3)


Line


DN: 09-048 17 November 2009Berthing Structure (BB190) (continued)

Line

Symbol Information


Symbol Graphic Name: LN_Black_BerthingStructure_Dry Symbol Graphic


ü

Element Name: Black_0.2mmSolidLine Element Reference: L00009 Element Type: Line - Simple



Line Weight: 0.2mm


MGCP50K LBB190 R000419 Berthing Structure / not submerged

(line)

(WLE <> 3)


Symbol Information


Symbol Graphic Name: LN_Black_BerthingStructure_Submerged Symbol Graphic





Line Weight: 0.2mm

Dash Length: 1.0mm

Dash Spacing: 0.5mm


MGCP50K LBB190 R000420 Berthing Structure / submerged (line) (WLE = 3)



DN: 09-048 17 November 2009Bog (BH015)Area

Symbol Information


Symbol Graphic Name: AR_Cyan_Bog Symbol Graphic


ü

Parameters:

Description: Cyan Swamp Fill

Element Type: Area - Pattern Element Reference: A00018Element Name: Cyan_SwampFill

Colour Token: Cyan

Area Pattern: See Element: Cyan_SwampFill in Annex I



MGCP50K ABH015 R000365 Bog / all (area)



DN: 09-048 17 November 2009Breakwater (BB041)Area

Symbol Information


Symbol Graphic Name: AR_Black_Breakwater Symbol Graphic


ü

Parameters:

Line Weight: 0.2mm



Colour Token: Black



MGCP50K ABB041 R000366 Breakwater / not covers and uncovers

(area)

(WLE <> 4 )


Symbol Information


Symbol Graphic Name: AR_BlackCyan_Breakwater Symbol Graphic

Symbol Placement Instructions: The two area fills are "combined" and used to fill the entire feature. The dashed line is

placed around the perimeter of the feature. NOTE: The symbol graphic at left is not able to accurately portray the screen

angle pattern only approximate the colour

Element Type: Area - Complex

Description: Cyan-31ScreenFill (Area Fill) coincident with Black-12ScreenFill-15degree (Area Fill)

Parameters:

Area Fill/Pattern 1: Cyan-31_ScreenFill

Area Fill/Pattern 2: Black-12_ScreenFill-15degree

Colour Token: Cyan-31 Parameters:

Description: Cyan-31_ScreenFill area fill (Cyan 31% screen, 45 degree angle)

Colour Token: Black-12

Element Reference: A00049Element Name: CoversUncovers-Fill

Element Type: Area - Fill Element Reference: A00007Element Name: Cyan-31_ScreenFill


Element Reference: A00048 Element Type: Area - Fill

Description: Black-12 Area Fill (Black 12% screen, 15 degree angle)

Colour Token: Black-12 Parameters:

Element Name: Black-12_ScreenFill-15degree


Element Type: Line - Styled Element Reference: L00031Element Name: Black_0.2mm-1mmLenDash-0.5mmGapLine


Dash Spacing: 0.5mm

Dash Length: 1.0mm

Parameters:

Line Weight: 0.2mm

Colour Token: Black


MGCP50K ABB041 R000367 Breakwater / covers and uncovers

(area)

(WLE = 4)


Line


DN: 09-048 17 November 2009Breakwater (BB041) (continued)

Line

Symbol Information


Symbol Graphic Name: LN_Black_Breakwater Symbol Graphic


ü




Line Weight: 0.2mm


MGCP50K LBB041 R000368 Breakwater / not covers and uncovers

(line)

(WLE <> 4)


Symbol Information


Symbol Graphic Name: LN_Black_Breakwater_CoversUncovers Symbol Graphic





Line Weight: 0.2mm

Dash Length: 1.0mm

Dash Spacing: 0.5mm


MGCP50K LBB041 R000369 Breakwater / covers and uncovers

(line)

(WLE = 4)



DN: 09-048 17 November 2009Bridge (AQ040)Line

Symbol Information


Symbol Graphic Name: LN_Black_Bridge Symbol Graphic

Symbol Placement Instructions: 1 tick is placed at the Start and at the End of each of the lines. Ticks point outward.

ü

Element Name: Black_Bridge Element Reference: L00055 Element Type: Line - Complex

Description: Black 0.3mm Solid Line casing varying based upon separation; Wing Ticks (0.15mm wt, 0.75mm long)

Fix at Start: Black_0.15mm-0.75mmLenWingTick

Fix at End: Black_0.15mm-0.75mmLenWingTick

Parameters:

Line Style: Black_0.3mmSolidCasedLine Colour Token: Black

Note: Tick angle depends on which end of the feature they are placed


Description: Black 0.3mm Solid Cased Line (0.3mm wt). Two 0.3mm solid lines equally offset and parallel to the linear geometry. The spacing

between the two lines is variable to the width of the over passing transportation feature

Element Name: Black_0.3mmSolidCasedLine


Line Weight: 0.3mm

Note: Casing: Spacing is variable to the width of the over passing transportation feature

Element Name: Black_0.15mm-0.75mmLenWingTick Element Reference: P00042 Element Type: Point - Simple

Description: A 0.75mm fixed length line (line weight 0.15mm) that is angled at 45, 135, 225 or 315 to the line with which it attaches.



Orientation: Based 45, 135, 225, and 315 degrees to line outward, from centre of line ends

Note: angle depends on which end of the feature the ticks are placed



Colour Token: Black

Length: 0.75mm

Parameters:

Line weight: 0.15mm




MGCP50K LAQ040 R000144 Bridge / fixed, unknown, or not

applicable (line)

(BOT=0 or BOT=17 or BOT=998)



DN: 09-048 17 November 2009Bridge (AQ040) (continued)

Line

Symbol Information


Symbol Graphic Name: LN_Black_Bridge_DrawLift Symbol Graphic

Symbol Placement Instructions: 1 tick is placed at the Start and at the End of each of the lines. Ticks point outward.

Element Name: Black_Bridge (Draw/Lift) Element Reference: L00057 Element Type: Line - Complex

Description: Black 0.3mm Solid Line casing varying based upon separation; Open Circle and Wing Ticks (0.15mm wt, 0.75mm long)


Line Style: Black_0.3mmSolidCasedLine Fix at Centre: Black_0.3mmCircleOpen

Fix at Start: Black_0.15mm-0.75mmLenWingTick

Fix at End: Black_0.15mm-0.75mmLenWingTick

Note: Tick angle depends on which end of the feature they are placed

Element Name: Black_0.3mmSolidCasedLine Element Reference: L00019 Element Type: Line - Simple

Description: Black 0.3mm Solid Cased Line (0.3mm wt). Two 0.3mm solid lines equally offset and parallel to the linear geometry. The spacing

between the two lines is variable to the width of the over passing transportation feature


Line Weight: 0.3mm










Parameters:

Line weight: 0.15mm

Colour Token: Black

Length: 0.75mm



Element Name: Black_0.3mmCircleOpen Element Reference: P00048 Element Type: Point - Simple

Description: An open circle (line weight 0.3mm) whose diameter depends upon the width of the feature.


Line weight: 0.3mm Diameter: variable depending on the width of the feature


MGCP50K LAQ040 R000145 Bridge / bascule, swing-bridge,

lift-bridge, or retractable (line)

(BOT=4 or BOT=10 or BOT=11 or BOT=12)


A - 25

DN: 09-048 17 November 2009Bridge (AQ040) (continued)

Line

Symbol Information


Symbol Graphic Name: LN_Black_Bridge_Pedestrian Symbol Graphic

Symbol Placement Instructions: Apex of 'V' touches bridge ends with ticks facing away

Element Name: Black_Bridge (Pedestrian) Element Reference: L00058 Element Type: Line - Complex

Description: Black 0.3mm Solid Line with V (0.15mm wt, 0.75mm long)

Fix at Start: Black_0.15mm-0.75mmLenV

Fix at End: Black_0.15mm-0.75mmLenV

Parameters:

Line Style: Black_0.3mmSolidLine Colour Token: Black

Note: Origin: Apex of 'V' touches bridge ends with ticks facing away





Line Weight: 0.3mm

Element Name: Black_0.15mm-0.75mmLenV Element Reference: P00039 Element Type: Point - Simple

Description: A black "V". Lineweight: 0.15mm, Length of each leg of the "V": 0.75mm







Colour Token: Black

Length: 0.75mm

Parameters:

Line weight: 0.15mm




MGCP50K LAQ040 R000146 Bridge / pedestrian (line) TRS=9


A - 26

DN: 09-048 17 November 2009Building (AL015)Area

Symbol Information


Symbol Graphic Name: AR_Black_Building Symbol Graphic

Symbol Placement Instructions: The area geometry of the feature is filled with the specified colour. No linear

symbology is applied to the perimeter / boundary.

ü

Parameters:

Description: Black Solid Fill

Element Type: Area - Fill Element Reference: A00006Element Name: Black_SolidAreaFill

Colour Token: Black

Note: Solid Fill


MGCP50K AAL015 R000026 Building / generic (area)


Symbol Information


Symbol Graphic Name: AR_Black_Building_Destroyed Symbol Graphic


Parameters:

Line Weight: 0.1mm



Colour Token: Black



MGCP50K AAL015 R000027 Building / destroyed (area) FUN=3



DN: 09-048 17 November 2009Building (AL015) (continued)

Area

Symbol Information


Symbol Graphic Name: AR_Black_Hospital Symbol Graphic

Symbol Placement Instructions: Bottom middle of stem touches the mid-point of the TOP edge of area feature. Align

shape to area building. The hospital cross may be replaced by crescent or other symbol in accordance with national

practice.

Colour Token: Black

Element Name: Black_SolidAreaFill Element Reference: A00006 Element Type: Area - Fill


Element Name: Black_0.2mmHospitalCrossOnStem

Description: Black filled circle (diameter of circle is 1.75mm) with a cross or plus centred in the circle. The cross/plus is paper white. The circle

rests upon a "stem" that is 0.6mm long with a lineweight of 0.25mm.

Element Type: Point - Shape Element Reference: P00011


Detail: Black_0.2mmHospitalCrossOnStem

Note: See Element: Black_0.2mmHospitalCrossOnStem in Annex H for detailed drawing instructions.


MGCP50K AAL015 R000028 Building / hospital / not destroyed

(area)

(PSF=1) and (FUN<>3)


Symbol Information


Symbol Graphic Name: AR_Black_School Symbol Graphic

Symbol Placement Instructions: Bottom middle of stem touches the mid-point of the TOP edge of area feature Align

shape to area building.

Colour Token: Black



Element Name: Black_0.2mmFlag

Description: Black flag on stem. The flag is 0.5mm tall on a 0.7mm tall stem. The flag is 0.7mm wide. The lineweight for the stem is 0.2mm.



Detail: Black_0.2mmFlag

Note: See Element: Black_0.2mmFlag in Annex H for detailed drawing instructions.


MGCP50K AAL015 R000029 Building / Education not "unknown",

not "not applicable", and not "other" /

not destroyed (area)

(EBT <> 0 and EBT<> 998 and EBT <> 999) and

(FUN<>3)


A - 28


Area

Symbol Information


Symbol Graphic Name: AR_Black_Greenhouse Symbol Graphic

Symbol Placement Instructions: The solid line is placed around the perimeter of the feature and the Area Pattern is

applied to the "interior" of the feature. The longest dimension of the diamond pattern should be oriented to the same

direction as the longest side of the greenhouse.

Colour Token: Black

Element Name: Black_GreenhouseFill Element Reference: A00053 Element Type: Area - Pattern

Description: Black Greenhouse Fill

Parameters:

Area Pattern: A black diamond cross hatching, with 0.4mm between centrelines of the hatch, hatch line wt

0.15mm with a cross angle of 145/35.

Note: The longest dimension of the diamond pattern should be oriented to the same direction as the longest

side of the glasshouse.




Line Weight: 0.15mm


MGCP50K AAL015 R000354 Building / greenhouse / not destroyed

(area)

(AFC=2) and (FUN<>3)


Symbol Information


Symbol Graphic Name: AR_Black_Mosque Symbol Graphic



Colour Token: Black



Element Name: Black_0.2mmCrescent

Description: Black crescent on a stem. Height of Crescent is 0.45mm. Height of stem is 0.65mm. Lineweights are 0.2mm.



Detail: Black_0.2mmCrescent

Note: See Element: Black_0.2mmCrescent in Annex H for detailed drawing instructions.


MGCP50K AAL015 R000030 Building / marabout, minaret, or

mosque / not destroyed (area)

(HWT=5 or HWT=6 or HWT=9) and (FUN<>3)


A - 29


Area

Symbol Information


Symbol Graphic Name: AR_Black_Synagogue Symbol Graphic



Colour Token: Black



Element Name: Black_0.2mmTee

Description: A black "T" (capital T). The "T" is 0.60 mm across and 0.85mm tall. The lineweight is 0.2mm.



Detail: Black_0.2mmTee

Note: See Element: Black_0.2mmTee in Annex H for detailed drawing instructions.


MGCP50K AAL015 R000031 Building / synagogue / not destroyed

(area)

(HWT=20) and (FUN<>3)


Symbol Information


Symbol Graphic Name: AR_Black_Church Symbol Graphic



Colour Token: Black



Element Name: Black_0.2mmCross

Description: Black cross (total height is 1.10 mm and total width is 0.60 mm. The cross piece (horizontal piece) is 0.60 mm long. Lineweight is

0.2mm.



Detail: Black_0.2mmCross

Note: See Element: Black_0.2mmCross in Annex H for detailed drawing instructions.


MGCP50K AAL015 R000032 Building / cathedral, chapel,

church,reigious community,

tabernacle, unknown or other / not

destroyed (area)

(HWT=0 or HWT=2 or HWT=3 or HWT=4 or HWT=7

or HWT=15 or HWT=999) and (FUN<>3)


A - 30


Area

Symbol Information


Symbol Graphic Name: AR_Black_Pagoda Symbol Graphic

Symbol Placement Instructions: Bottom middle of square touches the mid-point of the TOP edge of area feature.

Align shape to area building.

Colour Token: Black



Element Name: Black_0.2mmPagoda

Description: The box lineweight is 0.2mm. The arc radii is 0.44mm. The top is horizontally symetrical. The box is 0.8mm across and 0.7mm high.



Detail: Black_0.2mmPagoda

Note: See Element: Black_0.2mmPagoda in Annex H for detailed drawing instructions.


MGCP50K AAL015 R000033 Building / pagoda / not destroyed

(area)



Symbol Information


Symbol Graphic Name: AR_Black_Temple Symbol Graphic

Symbol Placement Instructions: Bottom middle of rectangle touches the mid-point of the TOP edge of area feature.

Align shape to area building.

Colour Token: Black



Element Name: Black_0.2mmTemple

Description: The box lineweight is 0.2mm. The small arc radii is 0.35mm. The large arc radius 0.43mm. The top of the symbol is horizontally

symetrical. The box is 1.18mm across.



Detail: Black_0.2mmTemple

Note: See Element: Black_0.2mmTemple in Annex H for detailed drawing instructions.


MGCP50K AAL015 R000034 Building / temple / not destroyed

(area)



A - 31


Area

Symbol Information


Symbol Graphic Name: AR_Black_Stupa Symbol Graphic

Symbol Placement Instructions: Bottom edge of point element "Black_0.2mmStupa" touches the top edge of the Area

Fill. Align shape to area building.

Colour Token: Black



Element Name: Black_0.2mmStupa

Description: A Black Stupa (Line weight is 0.2 mm)



Detail: Black_0.2mmStupa

Note: See Element: Black_0.2mmStupa in Annex H for detailed drawing instructions.


MGCP50K AAL015 R000317 Building / stupa / not destroyed (area) (HWT = 21) and (FUN <> 3)


Point

Symbol Information


Symbol Graphic Name: PT_Black_Building_Generic Symbol Graphic

Symbol Placement Instructions: Origin: Centre of square

ü

Element Type: Point - Simple Element Reference: P00050Element Name: Black_0.5mmSquareFilled

Description: A Black filled square with all sides 0.5mm long/wide


Length: 0.5mm


MGCP50K PAL015 R000219 Building / generic (point)




Point

Symbol Information


Symbol Graphic Name: PT_Blue072_Building_VO Symbol Graphic








MGCP50K PAL015 R000220 Building / single obstruction (point) (HGT >= 46)


Symbol Information


Symbol Graphic Name: PT_Blue072_Building_MultipleVOs Symbol Graphic

Symbol Placement Instructions: Use this "multiple vertical obstruction" symbol rather than the Building single vertical

obstruction symbol in areas of congestion or overprinting as directed by product finishing guidance. Origin: Centre of dot







MGCP50K PAL015 R000461 Building / multiple obstructions (point) *None


A - 33




Point

Symbol Information


Symbol Graphic Name: PT_Building_Destroyed Symbol Graphic

Symbol Placement Instructions: Origin: Centre of box

Element Type: Point - Shape Element Reference: P00100Element Name: Black_Building_Destroyed

Description: A Black building destroyed ("stair step" shape)


Note: See Element: Black_Building_Destroyed in Annex H for detailed drawing instructions.


MGCP50K PAL015 R000358 Building / destroyed / non-obstruction

(point)

(FUN=3) and (HGT<46)


Symbol Information


Symbol Graphic Name: PT_Black_Hospital Symbol Graphic

Symbol Placement Instructions: Origin: Centre of cross

Element Type: Point - Shape Element Reference: P00012Element Name: Black_0.2mmHospitalCross

Description: Black filled circle (diameter of circle is 1.75mm) with a cross or plus centred in the circle. The cross/plus is paper white.


Detail: Black_0.2mmHospitalCross

Note: See Element: Black_0.2mmHospitalCross in Annex H for detailed drawing instructions.


MGCP50K PAL015 R000221 Building / hospital / not destroyed /

non-obstruction (point)

(PSF=1) and (FUN<>3) and (HGT<46)


A - 34


Point

Symbol Information


Symbol Graphic Name: PT_Black_School Symbol Graphic


Element Type: Point - Shape Element Reference: P00118Element Name: Black_School

Description: A Black square with a flag on top.


Detail: Black_School

Note: See Element Black_School in Annex H for detailed drawing instructions


MGCP50K PAL015 R000222 Building / Education not "unknown",

not "not applicable", and not "other" /

not destroyed / non-obstruction (point)

(EBT <> 0 and EBT<> 998 and EBT <> 999) and

(FUN<>3) and (HGT<46)


Symbol Information


Symbol Graphic Name: PT_Black_RailwayStation_Accurate Symbol Graphic

Symbol Placement Instructions: Symbol is centred on top of railway symbol. Origin: Centre of open square

Element Name: Passenger-Terminal Element Reference: P00079 Element Type: Point - Complex

Description: A filled square inside of a larger open square. The smaller filled square is centred along and touching one side of the open square


Point 1 Name: Black_0.8mmSquareFilled

Point 2 Name: Black_0.1mm-1.2mmwideSquareOpen

Note: Point element "Black_SquareFilled" positioned inside the open square, touching side of open square that

is parallel to railway track on the same side as the terminal building

Element Name: Black_0.8mmSquareFilled Element Reference: P00006 Element Type: Point - Simple



Length: 0.8mm

Element Name: Black_0.1mm-1.2mmwideSquareOpen Element Reference: P00033 Element Type: Point - Simple



Lineweight: 0.1mmLength: 1.2mm


MGCP50K PAL015 R000223 Building / railway station / not

destroyed / accurate / non-obstruction

(point)

(TFC=15) and (FUN<>3) and (ACC = 1) and

(HGT<46)


A - 35


Point

Symbol Information


Symbol Graphic Name: PT_Black_RailwayStation_Approximate Symbol Graphic


Element Type: Point - Simple Element Reference: P00033Element Name: Black_0.1mm-1.2mmwideSquareOpen





MGCP50K PAL015 R000424 Building / railway station / not

destroyed / approximate /


(TFC=15) and (FUN<>3) and (ACC = 2) and

(HGT<46)


Symbol Information


Symbol Graphic Name: PT_Black_Greenhouse Symbol Graphic

Symbol Placement Instructions: Origin: Centre of rectangle

Element Type: Point - Shape Element Reference: P00109Element Name: Black_Building_Greenhouse

Description: A Open Rectangle with a cross hatch pattern inside


Detail: Black_Building_Greenhouse

Note: See Element: Black_Building_Greenhouse in Annex H for detailed drawing instructions.


MGCP50K PAL015 R000356 Building / greenhouse /

non-obstruction / not destroyed (point)

(AFC=2) and (HGT<46) and (FUN<>3)


A - 36


Point

Symbol Information


Symbol Graphic Name: PT_Black_Marabout Symbol Graphic


Element Type: Point - Shape Element Reference: P00015Element Name: Black_0.2mmMarabout

Description: Black crescent on a stem connected to a "non-filled" circle with a dot in the centre. The "non-filled" circle containing the dot is below the

crescent with a stem. Lineweight is 0.2mm. Dot diameter is 0.25mm. Stem height is 0.6mm.


Detail: Black_0.2mmMarabout

Note: See Element: Black_0.2mmMarabout in Annex H for detailed drawing instructions.


MGCP50K PAL015 R000224 Building / marabout / not destroyed /


(HWT=5) and (FUN<>3) and (HGT<46)


Symbol Information


Symbol Graphic Name: PT_Black_Synagogue Symbol Graphic


Element Name: Synagogue Element Reference: P00077 Element Type: Point - Complex

Description: A Black filled square with all sides 0.5mm long/wide with a Tee staff attached on the top of the filled square and centred along the side

where it is attached


Point 1 Name: Black_0.2mmTee


Note: Bottom of stem touches the mid-point of the TOP edge of the square feature


Element Name: Black_0.2mmTee Element Reference: P00017 Element Type: Point - Shape




Element Reference: P00050 Element Type: Point - SimpleElement Name: Black_0.5mmSquareFilled



Length: 0.5mm


MGCP50K PAL015 R000225 Building / synagogue / not destroyed /




A - 37


Point

Symbol Information


Symbol Graphic Name: PT_Black_Church Symbol Graphic


Element Name: Church Element Reference: P00075 Element Type: Point - Complex

Description: A Black filled square with all sides 0.5mm long/wide with a cross staff attached on the top of the filled square and centred along the side

where it is attached


Point 1 Name: Black_0.2mmCross




0.2mm.

Element Name: Black_0.2mmCross Element Reference: P00013 Element Type: Point - Shape







Length: 0.5mm


MGCP50K PAL015 R000226 Building / cathedral, chapel,

church,reigious community,

tabernacle, unknown or other / not

destroyed / non-obstruction (point)

(HWT=0 or HWT=2 or HWT=3 or HWT=4 or HWT=7

or HWT=15 or HWT=999) and (FUN<>3) and

(HGT<46)


Symbol Information


Symbol Graphic Name: PT_Black_Pagoda Symbol Graphic


Element Type: Point - Shape Element Reference: P00019Element Name: Black_0.2mmPagoda




Note: See Element: Black_0.2mmPagoda in Annex H for detailed drawing instructions.


MGCP50K PAL015 R000227 Building / pagoda / not destroyed /




A - 38


Point

Symbol Information


Symbol Graphic Name: PT_Black_Temple Symbol Graphic

Symbol Placement Instructions: Origin: Centre of open rectangle

Element Type: Point - Shape Element Reference: P00018Element Name: Black_0.2mmTemple

Description: The box lineweight is 0.2mm. The small arc radii is 0.35mm. The large arc radius 0.43mm. The top of the symbol is horizontally

symetrical. The box is 1.18mm across.



Note: See Element: Black_0.2mmTemple in Annex H for detailed drawing instructions.


MGCP50K PAL015 R000345 Building / temple / not destroyed /


(HWT = 16) and (FUN <> 3) and (HGT < 46)


Symbol Information


Symbol Graphic Name: PT_Black_Stupa Symbol Graphic


Element Type: Point - Shape Element Reference: P00031Element Name: Black_0.2mmStupa




Note: See Element: Black_0.2mmStupa in Annex H for detailed drawing instructions.


MGCP50K PAL015 R000228 Building / stupa / not destroyed /




A - 39


Point

Symbol Information


Symbol Graphic Name: PT_Black_Minaret Symbol Graphic


Element Type: Point - Shape Element Reference: P00010Element Name: Black_CircleOpenWithDot

Description: Black open circle with a smaller black filled circle/dot in its centre. Outer open circle has a diameter of 1.25mm and a lineweight of 0.15mm

for the boundary around the circumference. The inner dot has a diameter of 0.3mm and is filled.


Detail: Black_CircleOpenWithDot

Note: See Element: Black_CircleOpenWithDot in Annex H for detailed drawing instructions.


MGCP50K PAL015 R000229 Building / minaret / not destroyed /




Symbol Information


Symbol Graphic Name: PT_Black_Mosque Symbol Graphic


Element Name: Mosque Element Reference: P00076 Element Type: Point - Complex

Description: A Black filled square with all sides 0.5mm long/wide with a crescent staff attached on the top of the filled square and centred along the

side where it is attached


Point 1 Name: Black_0.2mmCrescent




Element Name: Black_0.2mmCrescent Element Reference: P00014 Element Type: Point - Shape







Length: 0.5mm


MGCP50K PAL015 R000230 Building / mosque / not destroyed /




A - 40


Point

Symbol Information


Symbol Graphic Name: PT_Black_Shrine Symbol Graphic

Symbol Placement Instructions: Origin: Centre of open circle

Element Name: Black_Shrine Element Reference: P00104 Element Type: Point - Complex

Description: A Combination of the 0.8mm open circle and the Point - Shape: Black_0.2mmCross. The stem of the Point - Shape is attached to the

top of the open circle.


Point 1 Name: Black_0.2mmCross

Point 2 Name: Black_0.8mmCircleOpen


0.2mm.





Element Reference: P00103 Element Type: Point - SimpleElement Name: Black_0.8mmCircleOpen

Description: A Black 0.8mm diameter open circle with a line weight of 0.15mm


Diameter: 0.8mm

Lineweight: 0.15mm


MGCP50K PAL015 R000424 Building / shrine / not destroyed /




A - 41

DN: 09-048 17 November 2009Built-Up Area (AL020)Area

Symbol Information


Symbol Graphic Name: AR_Black-54_BUA_Dense Symbol Graphic


ü


Element Name: Black-54_ScreenFill Element Reference: A00005 Element Type: Area - Fill


Parameters:





Line Weight: 0.1mm


MGCP50K AAL020 R000286 Built-Up Area / dense / fully functional

(area)

(BAC = 2) and (FUN = 6)


Symbol Information


Symbol Graphic Name: AR_Black-31_BUA_Sparse Symbol Graphic





Parameters:





Line Weight: 0.1mm


MGCP50K AAL020 R000287 Built-Up Area / sparse, or unknown /

fully functional (area)

(BAC = 0 or BAC = 1) and (FUN = 6)



DN: 09-048 17 November 2009Built-Up Area (AL020) (continued)

Area

Symbol Information


Symbol Graphic Name: AR_Black-12_BUA_Destroyed Symbol Graphic





Parameters:





Line Weight: 0.1mm


MGCP50K AAL020 R000288 Built-Up Area / destroyed, or damaged

(area)

(FUN = 3 or FUN = 13)


Symbol Information


Symbol Graphic Name: AR_Black_BUA_ShantyTown Symbol Graphic


Parameters:

Description: Black Shantytown Fill

Element Type: Area - Pattern Element Reference: A00014Element Name: Black_ShantyTownFill

Colour Token: Black

Area Pattern: See Element: Black_ShantyTownFill in Annex I



MGCP50K AAL020 R000410 Built-up Area / shanty town (area) (TXT = 'Shanty Town' or TXT = 'ShantyTown')


Point

A - 43

DN: 09-048 17 November 2009Built-Up Area (AL020) (continued)

Point

Symbol Information


Symbol Graphic Name: PT_Built-upArea Symbol Graphic


ü

POINT LABEL ONLY


MGCP50K PAL020 R000231 Built-Up Area / all (point)



DN: 09-048 17 November 2009Cableway (AT041)Line

Symbol Information


Symbol Graphic Name: LN_Black_Cableway Symbol Graphic


ü




Line Weight: 0.2mm

Dash Length: 2.0mm

Dash Spacing: 0.5mm


MGCP50K LAT041 R000161 Cableway / unknown or other /

non-obstruction (line)

(FUC = 0 or FUC = 999) and (HGT < 46)


Symbol Information


Symbol Graphic Name: LN_Black_Cableway_SkiLift Symbol Graphic





Line Weight: 0.2mm

Dash Length: 2.0mm

Dash Spacing: 0.5mm


MGCP50K LAT041 R000162 Cableway / recreational /


(FUC = 13) and (HGT < 46)


Symbol Information


Symbol Graphic Name: LN_Black_Cableway_Tramway Symbol Graphic





Line Weight: 0.2mm

Dash Length: 2.0mm

Dash Spacing: 0.5mm


MGCP50K LAT041 R000163 Cableway / transportation /


(FUC = 20) and (HGT < 46)



DN: 09-048 17 November 2009Cableway (AT041) (continued)

Line

Symbol Information


Symbol Graphic Name: LN_Black_Cableway_Obstruction Symbol Graphic

Symbol Placement Instructions: Symbol is placed along linear feature.

Element Name: Black_Cableway_Obstruction Element Reference: L00148 Element Type: Line - Complex

Description: Black Dashed line (0.2mm wt, 2.0mm Dash, 0.5 Gap), with repeating "sawtooth pattern" ticks (Blue072 0.4mm wt, 2.5mm length,

alternating between 60 and 120 degree orientation)



Repeating Point: Blue072_Sawtooth_Left

Repeating Point 2: Blue072_Sawtooth_Right

Repeating Point Interval: Repeating Point 2 immediately follows Repeating Point 1.

Repeating Point Interval 2: Repeating Point 1 immediately follows Repeating Point 2.

Element Name: Black_0.2mm-2mmLenDash-0.5mmGapLine Element Type: Line - Styled Element Reference: L00032



Line weight: 0.2mm Dash Length: 2.0mm Dash Spacing: 0.5mm

Element Name: Blue072_Sawtooth_Left Element Type: Point - Simple Element Reference: P00105

Description: Left half of the Blue072 Sawtooth pattern


Line weight: 0.4mm Length: 2.5mm Orientation: 60 degrees

Element Name: Blue072_Sawtooth_Right Element Reference: P00106 Element Type: Point - Simple

Description: Right half of the Blue072 Sawtooth pattern




MGCP50K LAT041 R000431 Cableway / obstruction (line) (HGT >= 46)


Symbol Information

Apply Label to Symbol:

Symbol Graphic Name: PT_Blue072_Cableway_LinearObstruction Symbol Graphic

Symbol Placement Instructions: Use this "point" linear obstruction symbol rather than the

LN_Black_Cableway_Obstruction symbol when the scale does not allow for a linear symbol. Use the labeling guidance

provided for the Cableway / Obstruction (Line) R000431. Origin: Centre of dot.

Element Type: Point - Shape Element Reference: P00113Element Name: Blue072_PT_LinearObstruction

Description: A Blue072 Point Linear Obstruction (Multiple vertical obstruction symbol with a zigzag line above it)


Detail: Blue072_PT_LinearObstruction

Note: See Element: Blue072_LinearObstruction in Annex H for detailed drawing instructions


LAT041


A - 46

DN: 09-048 17 November 2009Cairn (AL025)Point

Symbol Information


Symbol Graphic Name: PT_Black_Cairn Symbol Graphic

Symbol Placement Instructions: Origin: Centre of small circle

ü

Element Type: Point - Shape Element Reference: P00022Element Name: Black_0.2mmCairn

Description: A Black Cairn (Line weight is 0.2 mm)


Detail: Black_0.2mmCairn

Note: See Element: Black_0.2mmCairn in Annex H for detailed drawing instructions.


MGCP50K PAL025 R000232 Cairn / all (point)


Camp-site (AK060)Area

Symbol Information


Symbol Graphic Name: AR_Black_CampSite Symbol Graphic


ü

Parameters:

Line Weight: 0.2mm

Dash Length: 2.0mm

Dash Spacing: 0.5mm



Colour Token: Black



MGCP50K AAK060 R000020 Camp Site / all (area)



DN: 09-048 17 November 2009Canal (BH020)Area

Symbol Information


Symbol Graphic Name: AR_Cyan_Canal_Perennial Symbol Graphic


ü

Colour Token: Cyan-31

Element Name: Cyan-31_ScreenFill Element Reference: A00007 Element Type: Area - Fill


Parameters:





Line Weight: 0.2mm


MGCP50K ABH020 R000054 Canal / perennial / not under

construction (area)

(HYP = 1) and (FUN <> 1)


Symbol Information


Symbol Graphic Name: AR_Cyan_Canal_Non-perennial Symbol Graphic


Colour Token: Cyan

Element Name: Cyan_DryDrainageFill Element Reference: A00020 Element Type: Area - Pattern

Description: Cyan Dry Drainage Fill

Parameters:

Area Pattern: See Element: Cyan_DryDrainageFill in Annex I





Line Weight: 0.2mm

Dash Length: 2.0mm

Dash Spacing: 0.5mm


MGCP50K ABH020 R000055 Canal / non-perennial / not under

construction (area)

(HYP <> 1) and (FUN <> 1)



DN: 09-048 17 November 2009Canal (BH020) (continued)

Area

Symbol Information


Symbol Graphic Name: AR_Cyan_Canal_UnderConstruction Symbol Graphic

Symbol Placement Instructions: The dashed line is placed around the perimeter of the area geometry.

Parameters:

Line Weight: 0.2mm

Dash Length: 2.0mm

Dash Spacing: 0.5mm


Element Name: Cyan_0.2mm-2mmLenDash-0.5mmGapLine

Colour Token: Cyan



MGCP50K ABH020 R000426 Canal / under construction (area) FUN = 1


Line

Symbol Information


Symbol Graphic Name: LN_Cyan_Canal_Perennial Symbol Graphic


ü


Description: Cyan 0.4mm Solid Line (0.4mm wt)


Line Weight: 0.4mm


MGCP50K LBH020 R000172 Canal / perennial (line) HYP = 1



DN: 09-048 17 November 2009Canal (BH020) (continued)

Line

Symbol Information


Symbol Graphic Name: LN_Cyan_Canal_Dry Symbol Graphic





Line Weight: 0.4mm

Dash Length: 2.0mm

Dash Spacing: 0.5mm


MGCP50K LBH020 R000173 Canal / non-perennial (line) HYP <> 1


Cane (EC010)Area

Symbol Information


Symbol Graphic Name: AR_Green362_Cane Symbol Graphic

Symbol Placement Instructions: The extent of the area geometry is filled with the area fill pattern.

ü

Parameters:

Description: Green362 Cane Fill

Element Type: Area - Pattern Element Reference: A00050Element Name: Green362_CaneFill

Colour Token: Green362

Area Pattern: See Element: Green362_CaneFill in Annex I



MGCP50K AEC010 R000370 Cane / all (area)



DN: 09-048 17 November 2009Cart Track (AP010)Line

Symbol Information


Symbol Graphic Name: LN_Black_CartTrack Symbol Graphic


ü




Line Weight: 0.25mm

Dash Length: 3.0mm

Dash Spacing: 0.5mm


MGCP50K LAP010 R000130 Cart Track / all (line)


Catalytic Cracker (AC020)Point

Symbol Information


Symbol Graphic Name: PT_Black_CatalyticCracker Symbol Graphic


ü




Length: 0.8mm


MGCP50K PAC020 R000361 Catalytic Cracker / all (point)



DN: 09-048 17 November 2009Causeway (AQ064)Line

Symbol Information


Symbol Graphic Name: LN_Causeway Symbol Graphic

Symbol Placement Instructions: Dynamic text label only. No Graphic Parameters. The label is shown in conjunction

with transportation feature associated with the TRS attribute.

ü

LINE LABEL ONLY


MGCP50K LAQ064 R000147 Causeway / all (line)


Cave (DB030)Point

Symbol Information


Symbol Graphic Name: PT_Black_Cave Symbol Graphic

Symbol Placement Instructions: Origin: Intersection of the three line segments

ü

Element Type: Point - Simple Element Reference: P00036Element Name: Black_0.1mmY

Description: A Black "Y" (Line weight is 0.1 mm)



Note: Angle between V stems: 90 degrees. All line lengths are the same (0.8mm). Symbol is not rotated

towards inside of cave because Angle of Orientation (AOO) is not available on this feature.


MGCP50K PDB030 R000274 Cave / all (point)



DN: 09-048 17 November 2009Cemetery (AL030)Area

Symbol Information


Symbol Graphic Name: AR_Black_Cemetery Symbol Graphic


ü

Parameters:

Line Weight: 0.2mm

Dash Length: 2.0mm

Dash Spacing: 0.5mm



Colour Token: Black



MGCP50K AAL030 R000452 Cemetery / unknown or other (area) (REL = 0 or REL = 999)


Symbol Information


Symbol Graphic Name: AR_Black_Cemetery_Christian Symbol Graphic

Symbol Placement Instructions: The "Point - Shape" element is centred within the area and is aligned with the south

neatline. The line is placed around the perimeter of the feature.

Colour Token: Black


Parameters:

Line Weight: 0.2mm

Dash Length: 2.0mm

Dash Spacing: 0.5mm



Description: Black cross (total height is 1.10 mm and total width is 0.60 mm. The cross piece (horizontal piece) is 0.60 mm long. Lineweight is 0.2mm.






MGCP50K AAL030 R000038 Cemetery / christian (area) REL = 4



DN: 09-048 17 November 2009Cemetery (AL030) (continued)

Area

Symbol Information


Symbol Graphic Name: AR_Black_Cemetery_Buddhism Symbol Graphic



Colour Token: Black


Parameters:

Line Weight: 0.2mm

Dash Length: 2.0mm

Dash Spacing: 0.5mm



Description: A Black "U" (Line weight is 0.2 mm)

Element Name: Black_0.2mmU Element Reference: P00023 Element Type: Point - Shape


Detail: Black_0.2mmU

Note: See Element: Black_0.2mmU in Annex H for detailed drawing instructions.


MGCP50K AAL030 R000037 Cemetery / buddhism (area) REL = 1


Symbol Information


Symbol Graphic Name: AR_Black_Cemetery_Islam Symbol Graphic



Colour Token: Black


Parameters:

Line Weight: 0.2mm

Dash Length: 2.0mm

Dash Spacing: 0.5mm




Element Name: Black_0.2mmCrescent Element Reference: P00014 Element Type: Point - Shape





MGCP50K AAL030 R000036 Cemetery / islam (area) REL = 2


A - 54


Area

Symbol Information


Symbol Graphic Name: AR_Black_Cemetery_Judaism Symbol Graphic



Colour Token: Black


Parameters:

Line Weight: 0.2mm

Dash Length: 2.0mm

Dash Spacing: 0.5mm




Element Name: Black_0.2mmTee Element Reference: P00017 Element Type: Point - Shape





MGCP50K AAL030 R000040 Cemetery / judaism (area) REL = 5


Point

Symbol Information


Symbol Graphic Name: PT_Black_Cemetery_Unknown Symbol Graphic

Symbol Placement Instructions: Origin: Centre of "square"

ü

Element Type: Point - Shape Element Reference: P00126Element Name: Black_Cemetery_Unknown

Description: A Black "L" centred inside of a dashed black square.


Note: See Element: Black_Cemetery_Unknown in Annex H for detailed drawing instructions


MGCP50K PAL030 R000486 Cemetery / unknown or other religion

(point)

(REL = 0 or REL = 999)




Point

Symbol Information


Symbol Graphic Name: PT_Black_Cemetery_Christian Symbol Graphic

Symbol Placement Instructions: Origin: Base of cross

Element Type: Point - Shape Element Reference: P00013Element Name: Black_0.2mmCross






MGCP50K PAL030 R000233 Cemetery / christian (point) REL = 4


Symbol Information


Symbol Graphic Name: PT_Black_Cemetery_Buddhism Symbol Graphic

Symbol Placement Instructions: Origin: Centre of base

Element Type: Point - Shape Element Reference: P00023Element Name: Black_0.2mmU




Note: See Element: Black_0.2mmU in Annex H for detailed drawing instructions.


MGCP50K PAL030 R000234 Cemetery / buddhism (point) REL = 1


A - 56


Point

Symbol Information


Symbol Graphic Name: PT_Black_Cemetery_Islam Symbol Graphic

Symbol Placement Instructions: Origin: Base of staff

Element Type: Point - Shape Element Reference: P00014Element Name: Black_0.2mmCrescent






MGCP50K PAL030 R000235 Cemetery / islam (point) REL = 2


Symbol Information


Symbol Graphic Name: PT_Black_Cemetery_Judaism Symbol Graphic

Symbol Placement Instructions: Origin: Bottom centre of staff

Element Type: Point - Shape Element Reference: P00017Element Name: Black_0.2mmTee






MGCP50K PAL030 R000236 Cemetery / judaism (point) REL = 5


A - 57

DN: 09-048 17 November 2009Checkpoint (AH070)Point

Symbol Information


Symbol Graphic Name: PT_Black_Checkpoint Symbol Graphic


ü




Length: 0.5mm


MGCP50K PAH070 R000344 Checkpoint / all (point)


Circular Irrigation System (AJ010)Area

Symbol Information


Symbol Graphic Name: AR_Green362-7_CircularIrrigation Symbol Graphic



ü

Parameters:

Description: Green362-7 Area Fill (Green362 7% screen, 45 degree angle)

Element Type: Area - Fill Element Reference: A00010Element Name: Green362-7_ScreenFill

Colour Token: Green362-7



MGCP50K AAJ010 R000018 Circular Irrigation System / all (area)



DN: 09-048 17 November 2009Cistern (BI010)Point

Symbol Information


Symbol Graphic Name: PT_Cyan_Cistern Symbol Graphic


ü

Element Type: Point - Simple Element Reference: P00007Element Name: Cyan_0.8mmSquareFilled

Description: A Cyan filled square with all sides 0.8mm long/wide


Length: 0.8mm


MGCP50K PBI010 R000267 Cistern / all (point)


Cleared Way (EC040)Area

Symbol Information


Symbol Graphic Name: AR_ClearedWay Symbol Graphic

Symbol Placement Instructions: Static text label only. No Graphic Parameters.

ü

AREA LABEL ONLY


MGCP50K AEC040 R000105 Cleared Way / all (area)



DN: 09-048 17 November 2009Communication Line (AT060)Line

Symbol Information


Symbol Graphic Name: LN_Black_CommunicationLine Symbol Graphic


ü


Description: Black 0.1mm Dash Line (0.1mm wt, 2mm dash, 0.5mm gap)


Line Weight: 0.1mm

Dash Length: 2.0mm

Dash Spacing: 0.5mm


MGCP50K LAT060 R000164 Communication Line / non-obstruction

(line)

(HGT < 46)


Symbol Information


Symbol Graphic Name: LN_Black_CommunicationLine_Obstruction Symbol Graphic

Symbol Placement Instructions: The black dashed line symbol follows the geometry of the linear feature. The

"sawtooth" pattern is applied on top of the black dashed line.

Element Name: Black_CommunicationLine_Obstruction Element Reference: L00152 Element Type: Line - Complex

Description: Black Dashed line (0.1mm wt, 2.0mm Dash, 0.5 Gap), with repeating "sawtooth pattern" ticks (Blue072 0.4mm wt, 2.5mm length,

alternating between 60 and 120 degree orientation)



Repeating Point: Blue072_Sawtooth_Left

Repeating Point 2: Blue072_Sawtooth_Right


Repeating Point Interval 2: Repeating Point 1 immediately follows Repeating Point 2.

Element Name: Black_0.1mm-2mmLenDash-0.5mmGapLine Element Type: Line - Styled Element Reference: L00029




Element Name: Blue072_Sawtooth_Left Element Type: Point - Simple Element Reference: P00105




Element Name: Blue072_Sawtooth_Right Element Reference: P00106 Element Type: Point - Simple





MGCP50K LAT060 R000454 Communication Line / obstruction

(line)

(HGT >= 46)



DN: 09-048 17 November 2009Communication Line (AT060) (continued)

Line

Symbol Information

Apply Label to Symbol:

Symbol Graphic Name: PT_Blue072_CommunicationLine_LinearObstruction Symbol Graphic

Symbol Placement Instructions: Use this symbol rather than the LN_Black_CommunicationLine_Obstruction symbol

when the scale does not allow for a linear symbol. Use the labeling guidance provided for Communication Line /

Obstruction (Line) R000454. Origin: Centre of dot.

Element Type: Point - Shape Element Reference: P00113Element Name: Blue072_PT_LinearObstruction




Note: See Element: Blue072_LinearObstruction in Annex H for detailed drawing instructions


LAT060


Communication Station (AT050)Area

Symbol Information


Symbol Graphic Name: AR_Black_CommunicationStation Symbol Graphic


ü

Parameters:

Line Weight: 0.2mm

Dash Length: 2.0mm

Dash Spacing: 0.5mm



Colour Token: Black



MGCP50K AAT050 R000052 Communication Station / all (area)



DN: 09-048 17 November 2009Communication Tower (AT080)Point

Symbol Information


Symbol Graphic Name: PT_Black_CommunicationTower Symbol Graphic


ü








MGCP50K PAT080 R000257 Communication Tower /


(HGT < 46)


Symbol Information


Symbol Graphic Name: PT_Blue072_CommunicationTower_VO Symbol Graphic








MGCP50K PAT080 R000258 Communication Tower / single

obstruction (point)

(HGT >= 46)



DN: 09-048 17 November 2009Communication Tower (AT080) (continued)

Point

Symbol Information


Symbol Graphic Name: PT_Blue072_CommunicationTower_MultipleVOs Symbol Graphic

Symbol Placement Instructions: Use this "multiple vertical obstruction" symbol rather than the Communication Tower

single vertical obstruction symbol in areas of congestion or overprinting as directed by product finishing guidance. Origin:

Centre of dot







MGCP50K PAT080 R000462 Communication Tower / multiple

obstructions (point)

*None


A - 63



DN: 09-048 17 November 2009Control Tower (AQ060)Point

Symbol Information


Symbol Graphic Name: PT_Black_ControlTower Symbol Graphic


ü








MGCP50K PAQ060 R000251 Control Tower / non-obstruction (point) (HGT < 46)


Symbol Information


Symbol Graphic Name: PT_Blue072_ControlTower_VO Symbol Graphic








MGCP50K PAQ060 R000252 Control Tower / single obstruction

(point)

(HGT >= 46)



DN: 09-048 17 November 2009Control Tower (AQ060) (continued)

Point

Symbol Information


Symbol Graphic Name: PT_Blue072_ControlTower_MultipleVOs Symbol Graphic

Symbol Placement Instructions: Use this "multiple vertical obstruction" symbol rather than the Control Tower single

vertical obstruction symbol in areas of congestion or overprinting as directed by product finishing guidance. Origin: Centre

of dot







MGCP50K PAQ060 R000463 Control Tower / multiple obstructions

(point)

*None


Conveyor (AF020)Line

Symbol Information


Symbol Graphic Name: LN_Black_Conveyor Symbol Graphic


ü




Line Weight: 0.2mm

Dash Length: 2.0mm

Dash Spacing: 0.5mm


MGCP50K LAF020 R000113 Conveyor / all (line)





DN: 09-048 17 November 2009Cooling Tower (AF030)Point

Symbol Information


Symbol Graphic Name: PT_Black_CoolingTower Symbol Graphic


ü








MGCP50K PAF030 R000206 Cooling Tower / non-obstruction

(point)

(HGT < 46)


Symbol Information


Symbol Graphic Name: PT_Blue072_CoolingTower_VO Symbol Graphic








MGCP50K PAF030 R000207 Cooling Tower / single obstruction

(point)

(HGT >= 46)



DN: 09-048 17 November 2009Cooling Tower (AF030) (continued)

Point

Symbol Information


Symbol Graphic Name: PT_Blue072_CoolingTower_MultipleVOs Symbol Graphic

Symbol Placement Instructions: Use this "multiple vertical obstruction" symbol rather than the Cooling Tower single


of dot







MGCP50K PAF030 R000464 Cooling Tower / multiple obstructions

(point)

*None


A - 67



DN: 09-048 17 November 2009Crane (AF040)Point

Symbol Information


Symbol Graphic Name: PT_Black_Crane Symbol Graphic


ü








MGCP50K PAF040 R000209 Crane / non-obstruction (point) (HGT < 46)


Symbol Information


Symbol Graphic Name: PT_Blue072_Crane_VO Symbol Graphic








MGCP50K PAF040 R000208 Crane / single obstruction (point) (HGT >= 46)



DN: 09-048 17 November 2009Crane (AF040) (continued)

Point

Symbol Information


Symbol Graphic Name: PT_Blue072_Crane_MultipleVOs Symbol Graphic

Symbol Placement Instructions: Use this "multiple vertical obstruction" symbol rather than the Crane single vertical








MGCP50K PAF040 R000465 Crane / multiple obstructions (point) *None


A - 69



DN: 09-048 17 November 2009Crop Land (EA010)Area

Symbol Information


Symbol Graphic Name: AR_Green362-7_Cropland_DryCrops Symbol Graphic



ü

Parameters:


Element Type: Area - Fill Element Reference: A00010Element Name: Green362-7_ScreenFill




MGCP50K AEA010 R000094 Crop Land / dry crop (area) CSP = 13


Symbol Information


Symbol Graphic Name: AR_Green362_Cropland_Orchard Symbol Graphic


Parameters:

Description: Green362 Orchard/Plantation Fill

Element Type: Area - Pattern Element Reference: A00028Element Name: Green362_OrchardPlantationFill


Area Pattern: See Element: Green362_OrchardPlantationFill in Annex I



MGCP50K AEA010 R000095 Crop Land / fruit tree / banana, coffee,

cotton, fruit, palm, rubber, sugar, or

tobacco (area)

(CSP = 15) or (PPO = 7 or PPO = 20 or PPO = 28 or

PPO = 44 or PPO = 79 or PPO = 94 or PPO = 111 or

PPO = 117 )



DN: 09-048 17 November 2009Crop Land (EA010) (continued)

Area

Symbol Information


Symbol Graphic Name: AR_Green362_Cropland_Vineyard Symbol Graphic


Parameters:

Description: Green362 Vineyard/Hops Fill

Element Type: Area - Pattern Element Reference: A00029Element Name: Green362_VineyardHopFill


Area Pattern: See Element: Green362_VineyardHopFill in Annex I



MGCP50K AEA010 R000096 Crop Land / grape, or hop (area) (CSP = 16 or CSP = 18)


Culvert (Culvert)Point

Symbol Information


Symbol Graphic Name: PT_Black_Culvert Symbol Graphic

Symbol Placement Instructions: Apex is centred on related transportation feature

ü

Element Type: Point - Simple Element Reference: P00124Element Name: Black_0.1mm_V

Description: A Black "V". Line weight is 0.1mm, Length of each leg of the "V": 0.8mm





MGCP50K Culvert R000458 Culvert / all (point)



DN: 09-048 17 November 2009Cut (DB070)Line

Symbol Information


Symbol Graphic Name: LN_Dk-Brown1815_Cut_MediumGap Symbol Graphic

Symbol Placement Instructions: The linear symbol described below is offset 2.0mm on each side of the underlying

linear geometry for the Cut feature. Ticks point in towards the Cut geometry and the related Transportation System

feature.

ü

Description: Dk-Brown1815 0.25mm Solid Line with Ticks (0.25mm wt, 0.5mm long, 1.5mm interval)

Element Type: Line - Complex Element Reference: L00196Element Name: Dk-Brown1815_Cut

Parameters:

Line Style: Dk-Brown1815_0.25mmSolidLine

Repeating Point: Dk-Brown1815_0.25mm-0.5mmLenTick



Note: Tick end is on and at 90 degrees to line. Tick Interval: 1.5mm

Element Reference: L00024 Element Type: Line - SimpleElement Name: Dk-Brown1815_0.25mmSolidLine

Description: Dk-Brown1815 0.25mm Solid Line (0.25mm wt)

Parameters:

Line weight: 0.25mm


Element Reference: P00070 Element Type: Point - SimpleElement Name: Dk-Brown1815_0.25mm-0.5mmLenTick

Description: A Dk-Brown1815 0.5mm length line with a line weight of 0.250mm



Parameters:

Orientation: Based 90 degrees to line


MGCP50K LDB070 R000456 Cut / road, unknown, not applicable, or

other (line)

TRS = 0 or TRS = 13 or TRS = 998 or TRS = 999



DN: 09-048 17 November 2009Cut (DB070) (continued)

Line

Symbol Information


Symbol Graphic Name: LN_Dk-Brown1815_Cut_SmallGap Symbol Graphic



feature.



Parameters:








Parameters:

Line weight: 0.25mm






Parameters:



MGCP50K LDB070 R000455 Cut / aqueduct, canal, or pipeline (line) TRS = 2 or TRS = 5 or TRS = 10


A - 73

DN: 09-048 17 November 2009Cut (DB070) (continued)

Line

Symbol Information


Symbol Graphic Name: LN_Dk-Brown1815_Cut_LargeGap Symbol Graphic



feature.



Parameters:








Parameters:

Line weight: 0.25mm






Parameters:



MGCP50K LDB070 R000457 Cut / railway or road and railway (line) TRS = 12 or TRS = 14


A - 74

DN: 09-048 17 November 2009Cut Line (DB071)Line

Symbol Information


Symbol Graphic Name: LN_Dk-Brown1815_Cutline_GreaterthanContour Symbol Graphic

Symbol Placement Instructions: The linear symbology is applied to the geometry of the feature. Ticks point downhill.

NOTE: Ensuring that ticks point downhill may not be an automatic process as some systems rely on information such as

the direction that the feature was captured.

ü


Element Type: Line - Complex Element Reference: L00066Element Name: Dk-Brown1815_Slope (High)

Parameters:





Note: Tick end is on and at 90 degrees to line, facing downhill. Tick Interval: 1.5mm



Parameters:

Line weight: 0.25mm






Parameters:



MGCP50K LDB071 R000188 Cut Line / greater than contour interval

(line)

PFH >= contour interval



DN: 09-048 17 November 2009Cut Line (DB071) (continued)

Line

Symbol Information


Symbol Graphic Name: LN_Dk-Brown1815_Cutline_LessthanContour Symbol Graphic




Element Name: Dk-Brown1815_0.25mm-3.0mmLenDash-

0.5mmGapTickLine


Description: Dk-Brown1815 0.25mm Dashed Line ( 0.25mm wt, 3.0mm Dash Length, 0.5mm Dash Gap)

Colour Token: Dk-Brown1815 Parameters:

Line Style: Dk-Brown1815_0.25mm-3.0mmLenDash-0.5mmGapTickLine


Repeating Point 2: Dk-Brown1815_0.25mm-0.5mmLenTick

Repeating Point Interval: Initial offset: 1.0 mm, after that, 3.5mm

Repeating Point Interval 2: Initial offset: 2.0 mm, after that, 3.5mm


0.5mmGapTickLine

Element Type: Line - Styled Element Reference: L00193




Element Name: Dk-Brown1815_0.25mm-0.5mmLenTick Element Type: Point - Simple Element Reference: P00070



Line weight: 0.25mm Length: 0.5mm Orientation: Based 90 degrees to line

Element Name: Dk-Brown1815_0.25mm-0.5mmLenTick Element Reference: P00070 Element Type: Point - Simple





MGCP50K LDB071 R000432 Cut Line / less than contour interval

(line)

PFH < contour interval


A - 76

DN: 09-048 17 November 2009Dam (BI020)Area

Symbol Information


Symbol Graphic Name: AR_Black_Dam Symbol Graphic

Symbol Placement Instructions: Interior oriented 90 degrees between upstream and downstream when dam is straight.

When dam is curved, spacing is 0.5mm at the narrowest (downhill side) and fanned out equally towards the uphill side of

the dam not to exceed 0.7mm.

ü

Element Name: Black_DamAreaInteriorFill Element Reference: A00045 Element Type: Area - Pattern

Description: A linear pattern used to fill an area geometry.


Area Pattern: Lineweight: 0.1mm; Interior line spacing: 0.5mm at the narrowest point.

Note: Interior lines oriented 90 degrees between upstream and downstream lines when dam is straight. When

dam is curved, spacing is 0.5mm at the narrowest (downhill side) and fanned out equally towards the uphill side

of the dam not to exceed 0.7mm.

Element Name: Black_DamAreaPerimeter Element Reference: L00139 Element Type: Line - Complex

Description: Upstream: Black 0.4mm Solid Line Downstream: Black 0.1mm Solid Line

Parameters:

Line Style: Black_0.4mmSolidLine

Line Style 2: Black_0.1mmSolidLine

Colour Token: Black

Note: Use 0.4mm Black solid line for upstream and 0.1mm Black solid line for downstream




Line Weight: 0.4mm

Element Name: Black_0.1mmSolidLine Element Reference: L00007


Element Type: Line - Simple


Line Weight: 0.1mm


MGCP50K ABI020 R000321 Dam / not soil (area) SMC <> 104



DN: 09-048 17 November 2009Dam (BI020) (continued)

Area

Symbol Information


Symbol Graphic Name: AR_Dk-Brown1815_Dam Symbol Graphic

Symbol Placement Instructions: Interior oriented 90 degrees between upstream and downstream when dam is straight.

When dam is curved, spacing is 0.5mm at the narrowest (downhill side) and fanned out equally towards the uphill side of

the dam not to exceed 0.7mm.

Element Name: Dk-Brown1815_DamAreaInteriorFill Element Reference: A00056 Element Type: Area - Pattern



Area Pattern: Lineweight: 0.1mm; Interior line spacing: 0.5mm at the narrowest point.

Note: Interior lines oriented 90 degrees between upstream and downstream lines when dam is straight. When

dam is curved, spacing is 0.5mm at the narrowest (downhill side) and fanned out equally towards the uphill side

of the dam not to exceed 0.7mm.

Element Name: Dk-Brown1815_DamAreaPerimeter Element Reference: L00194 Element Type: Line - Complex

Description: Upstream: Dk-Brown1815 0.4mm Solid Line Downstream: Dk-Brown1815 0.1mm Solid Line

Parameters:


Line Style 2: Dk-Brown1815_0.4mmSolidLine


Note: Use 0.4mm Dk-Brown1815 solid line for upstream and 0.1mm Dk-Brown1815 solid line for downstream

Element Name: Dk-Brown1815_0.1mmSolidLine Element Reference: L00107 Element Type: Line - Simple



Line Weight: 0.1mm

Element Name: Dk-Brown1815_0.4mmSolidLine Element Reference: L00195


Element Type: Line - Simple


Line Weight: 0.4mm


MGCP50K ABI020 R000459 Dam / soil (area) SMC = 104


Line

Symbol Information


Symbol Graphic Name: LN_Black_Dam Symbol Graphic


ü




Line Weight: 0.5mm


MGCP50K LBI020 R000184 Dam / unknown, or not applicable

(line)

(TRS = 0 or TRS = 998)




Line

Symbol Information


Symbol Graphic Name: LN_Black_Dam_CarryingTransportation Symbol Graphic

Symbol Placement Instructions: The linear symbology is applied to the geometry of the feature. The cased lines are

parallel to and positioned 0.100mm from side of transportation feature.

ü

Element Name: Black_0.3mmSolidCasedLine Element Reference: L00019 Element Type: Line - Simple

Description: Black 0.3mm Solid Cased Line (0.3mm wt). Two 0.3mm solid lines equally offset and parallel to the linear geometry. The spacing between

the two lines is variable to the width of the over passing transportation feature


Line Weight: 0.3mm



MGCP50K LBI020 R000428 Dam / under construction, or fully

functional / railway, road, road and

railway, or other (line)

(FUN = 1 or FUN = 6) and (TRS = 12 or TRS = 13 or

TRS = 14 or TRS = 999)


Point

Symbol Information


Symbol Graphic Name: PT_Black_Dam Symbol Graphic

Symbol Placement Instructions: Long dimension of symbol oriented to Angle of Orientation (AOO) of dam. Origin:

Centre of line

ü

Element Type: Point - Simple Element Reference: P00051Element Name: Black_0.5mm-1.5LenLine

Description: A Black 0.5mm lineweight line that is 1.5mm long



Orientation: Centred 90 degrees to line


MGCP50K PBI020 R000268 Dam / non-obstruction (point) (HGT < 46)




Point

Symbol Information


Symbol Graphic Name: PT_Blue072_Dam_VO Symbol Graphic


ü







MGCP50K PBI020 R000425 Dam / single obstruction (point) (HGT >= 46)


Symbol Information


Symbol Graphic Name: PT_Blue072_Dam_MultipleVOs Symbol Graphic

Symbol Placement Instructions: Use this "multiple vertical obstruction" symbol rather than the Dam single vertical








MGCP50K PBI020 R000466 Dam / multiple obstructions (point) *None





DN: 09-048 17 November 2009Dish Aerial (AT010)Point

Symbol Information


Symbol Graphic Name: PT_Black_DishAerial Symbol Graphic


ü








MGCP50K PAT010 R000255 Dish Aerial / non-obstruction (point) (HGT < 46)


Symbol Information


Symbol Graphic Name: PT_Blue072_DishAerial_VO Symbol Graphic








MGCP50K PAT010 R000256 Dish Aerial / single obstruction (point) (HGT >= 46)



DN: 09-048 17 November 2009Dish Aerial (AT010) (continued)

Point

Symbol Information


Symbol Graphic Name: PT_Blue072_DishAerial_MultipleVOs Symbol Graphic

Symbol Placement Instructions: Use this "multiple vertical obstruction" symbol rather than the Dish Aerial single


of dot







MGCP50K PAT010 R000467 Dish Aerial / multiple obstructions

(point)

*None


A - 82



DN: 09-048 17 November 2009Disposal Site (AB000)Area

Symbol Information


Symbol Graphic Name: AR_Black_DisposalSite_Refuse Symbol Graphic


ü

Parameters:

Line Weight: 0.2mm

Dash Length: 2.0mm

Dash Spacing: 0.5mm



Colour Token: Black



MGCP50K AAB000 R000010 Disposal Site / refuse (area) PBY = 8


Symbol Information


Symbol Graphic Name: AR_Black_DisposalSite_Other Symbol Graphic


Parameters:

Line Weight: 0.2mm

Dash Length: 2.0mm

Dash Spacing: 0.5mm



Colour Token: Black



MGCP50K AAB000 R000011 Disposal Site / non-refuse (area) PBY <> 8



DN: 09-048 17 November 2009Ditch (BH030)Area

Symbol Information


Symbol Graphic Name: AR_Cyan_Ditch_Perennial Symbol Graphic


ü




Parameters:





Line Weight: 0.3mm


MGCP50K ABH030 R000056 Ditch / perennial (area) HYP = 1


Symbol Information


Symbol Graphic Name: AR_Cyan_Ditch_Intermittent Symbol Graphic

Symbol Placement Instructions: Symbolize as linear. Place linear symbol on centreline of area feature.

Parameters:

Line Weight: 0.3mm

Dash Length: 2.0mm

Dash Spacing: 0.5mm



Colour Token: Cyan



MGCP50K ABH030 R000453 Ditch / non-perennial (area) HYP <> 1


Line


DN: 09-048 17 November 2009Ditch (BH030) (continued)

Line

Symbol Information


Symbol Graphic Name: LN_Cyan_Ditch_Perennial Symbol Graphic


ü




Line Weight: 0.3mm


MGCP50K LBH030 R000175 Ditch / perennial (line) HYP = 1


Symbol Information


Symbol Graphic Name: LN_Cyan_Ditch_Intermittent Symbol Graphic





Line Weight: 0.3mm

Dash Length: 2.0mm

Dash Spacing: 0.5mm


MGCP50K LBH030 R000174 Ditch / non-perennial (line) HYP <> 1



DN: 09-048 17 November 2009Dry Dock (BB090)Area

Symbol Information


Symbol Graphic Name: AR_Black_DryDock Symbol Graphic

Symbol Placement Instructions: Solid line is placed around the perimeter of the feature.

ü

Parameters:

Line Weight: 0.2mm



Colour Token: Black



MGCP50K ABB090 R000372 Dry Dock / all (area)



DN: 09-048 17 November 2009Elevation Contour (Elevation Contour)Line

Symbol Information


Symbol Graphic Name: LN_Dk-Brown1815_Contour_LandIndexAccurate Symbol Graphic


ü




Line Weight: 0.2mm


MGCP50K Elevation

Contour

R000289 Elevation Contour / land index

accurate (line)

(Hypsography Portrayal Type = Index) and (Elevation

Surface Category = Land) and (Accuracy = Accurate)


Symbol Information


Symbol Graphic Name: LN_Dk-Brown1815_Contour_LandIndexApproximate Symbol Graphic


Element Name: Dk-Brown1815_0.2mm-5mmLenDash-0.5mmGapLine Element Reference: L00176 Element Type: Line - Styled

Description: Dk-Brown1815 0.2mm Dash Line (0.2mm wt, 5mm dash, 0.5mm gap)


Line Weight: 0.2mm

Dash Length: 5.0mm

Dash Spacing: 0.5mm


MGCP50K Elevation

Contour

R000433 Elevation Contour / land index

approximate (line)


Surface Category = Land) and (Accuracy =

Approximate)



DN: 09-048 17 November 2009Elevation Contour (Elevation Contour) (continued)

Line

Symbol Information


Symbol Graphic Name: LN_Cyan_Contour_SnowIceIndexAccurate Symbol Graphic





Line Weight: 0.2mm


MGCP50K Elevation

Contour

R000290 Elevation Contour / snow/ice index

accurate (line)


Surface Category = Snow Field and/or Ice Field) and

(Accuracy = Accurate)


Symbol Information


Symbol Graphic Name: LN_Cyan_Contour_SnowIceIndexApproximate Symbol Graphic





Line Weight: 0.2mm

Dash Length: 5.0mm

Dash Spacing: 0.5mm


MGCP50K Elevation

Contour

R000434 Elevation Contour / snow/ice index

approximate (line)


Surface Category = Snow Field and/or Ice Field) and

(Accuracy = Approximate)


A - 88


Line

Symbol Information


Symbol Graphic Name: LN_Dk-Brown1815_Contour_LandIntermediateAccurate Symbol Graphic





Line Weight: 0.1mm


MGCP50K Elevation

Contour

R000291 Elevation Contour / land intermediate

accurate (line)

(Hypsography Portrayal Type = Intermediate Contour)

and (Elevation Surface Category = Land) and

(Accuracy = Accurate)


Symbol Information


Symbol Graphic Name: LN_Dk-Brown1815_Contour_LandIntermediateApproximate Symbol Graphic


Element Name: Dk-Brown1815_0.1mm-5mmLenDash-0.5mmGapLine Element Reference: L00177 Element Type: Line - Styled

Description: Dk-Brown1815 0.1mm Dash Line (0.1mm wt, 5.0mm dash, 0.5mm gap)


Line Weight: 0.1mm

Dash Length: 5.0mm

Dash Spacing: 0.5mm


MGCP50K Elevation

Contour

R000435 Elevation Contour / land intermediate

approximate (line)


and (Elevation Surface Category = Land) and

(Accuracy = Approximate)


A - 89


Line

Symbol Information


Symbol Graphic Name: LN_Cyan_Contour_SnowIceIntermediateAccurate Symbol Graphic





Line Weight: 0.1mm


MGCP50K Elevation

Contour

R000292 Elevation Contour / snow/ice

intermediate accurate (line)


and (Elevation Surface Category = Snow Field and/or

Ice Field) and (Accuracy = Accurate)


Symbol Information


Symbol Graphic Name: LN_Cyan_Contour_SnowIceIntermediateApproximate Symbol Graphic





Line Weight: 0.1mm

Dash Length: 5.0mm

Dash Spacing: 0.5mm


MGCP50K Elevation

Contour


intermediate approximate (line)



Ice Field) and (Accuracy = Approximate)


A - 90


Line

Symbol Information


Symbol Graphic Name: LN_Dk-Brown1815_Contour_LandHalfAuxillary Symbol Graphic


Element Name: Dk-Brown1815_0.1mm-3mmLenDashLine Element Reference: L00109 Element Type: Line - Styled



Line Weight: 0.1mm

Dash Length: 3.0mm

Dash Spacing: 0.5mm


MGCP50K Elevation

Contour

R000293 Elevation Contour / land half auxillary

(line)

(Hypsography Portrayal Type = Half Auxillary) and

(Elevation Surface Category = Land)


Symbol Information


Symbol Graphic Name: LN_Cyan_Contour_SnowIceHalfAuxillary Symbol Graphic


Element Name: Cyan_0.1mm-3mmLenDashLine Element Reference: L00110 Element Type: Line - Styled



Line Weight: 0.1mm

Dash Length: 3.0mm

Dash Spacing: 0.5mm


MGCP50K Elevation

Contour

R000294 Elevation Contour / snow/ice half

auxillary (line)

(Hypsography Portrayal Type = Half Auxillary) and

(Elevation Surface Category = Snow Field and/or Ice

Field)


A - 91


Line

Symbol Information


Symbol Graphic Name: LN_Dk-Brown1815_Contour_LandFormLine Symbol Graphic


Element Name: Dk-Brown1815_0.1mm-3mmLenDashLine Element Reference: L00109 Element Type: Line - Styled



Line Weight: 0.1mm

Dash Length: 3.0mm

Dash Spacing: 0.5mm


MGCP50K Elevation

Contour

R000295 Elevation Contour / land form line

(line)

(Hypsography Portrayal Type = Form Line) and



Symbol Information


Symbol Graphic Name: LN_Cyan_Contour_SnowIceFormLine Symbol Graphic


Element Name: Cyan_0.1mm-3mmLenDashLine Element Reference: L00110 Element Type: Line - Styled



Line Weight: 0.1mm

Dash Length: 3.0mm

Dash Spacing: 0.5mm


MGCP50K Elevation

Contour

R000296 Elevation Contour / snow/ice form line

(line)

(Hypsography Portrayal Type = Form Line) and


Field)


A - 92


Line

Symbol Information


Symbol Graphic Name: LN_Dk-Brown1815_Contour_Land_DepressionIndex Symbol Graphic

Symbol Placement Instructions: The upper most depression contour shall have a tick interval of 3.0mm. Each

successive descending contour shall have ticks at: 3.0mm, 2.0mm, 1.0mm, and 0.5mm. Depression ticks point downhill.

Description: Dk-Brown1815 0.2mm Solid Line with repeating Dk-Brown1815 0.1mm wt 0.5mm long ticks

Element Type: Line - Complex Element Reference: L00111Element Name: Dk-Brown1815_Land-DepressionIndex

Parameters:



Repeating Point Interval: Variable


Note: Each depression contour shall have ticks spaced equally on each descending depression contour.

Where the slope of a depression is such that the contours become very close, the length of the depression ticks

may be reduced by 1/2 to achieve legibility.



Parameters:

Line weight: 0.2mm



Description: A Dk-Brown1815 0.1mm lineweight line that is 0.5mm long



Parameters:



MGCP50K Elevation

Contour

R000297 Elevation Contour / land depression

index (line)

(Hypsography Portrayal Type = Depression Index) and



A - 93


Line

Symbol Information


Symbol Graphic Name: LN_Cyan_Contour_SnowIce_DepressionIndex Symbol Graphic


successive descending depression contour shall have ticks spaced 3.0mm, 2.0mm, 1.0mm, and 0.5mm. Depression ticks

point downhill.

Description: Cyan 0.2mm Solid Line with repeating Blue 0.1mm wt 0.5mm long ticks

Element Type: Line - Complex Element Reference: L00112Element Name: Cyan_SnowIce-DepressionIndex

Parameters:

Line Style: Cyan_0.2mmSolidLine

Repeating Point: Cyan_0.1mm-0.5mmLenTick


Colour Token: Cyan

Note: Each depression contour shall have ticks spaced equally. Where the slope of a depression is such that

the contours become very close, the length of the depression ticks may be reduced by one-half to achieve

legibility.

Element Reference: L00015 Element Type: Line - SimpleElement Name: Cyan_0.2mmSolidLine


Parameters:

Line weight: 0.2mm

Colour Token: Cyan

Element Reference: P00055 Element Type: Point - SimpleElement Name: Cyan_0.1mm-0.5mmLenTick

Description: A Cyan 0.100mm lineweight line that is 0.5mm long

Colour Token: Cyan


Parameters:



MGCP50K Elevation

Contour


depression index (line)

(Hypsography Portrayal Type = Depression Index) and


Field)


A - 94


Line

Symbol Information


Symbol Graphic Name: LN_Dk-Brown1815_Contour_Land_DepressionIntermediate Symbol Graphic


successive descending contour shall have tick spacing of: 3.0mm, 2.0mm, 1.0mm, and 0.5mm. Depression ticks point

downhill.


Element Type: Line - Complex Element Reference: L00113Element Name: Dk-Brown1815_Land-DepressionIntermediate

Parameters:





Note: Depression contours shall have ticks spaced equally on each descending depression contour line.

Where the slope of a depression is such that the contours become very close, the length of the depression ticks

may be reduced by 1/2 to achieve legibility.



Parameters:

Line weight: 0.1mm






Parameters:



MGCP50K Elevation

Contour


intermediate (line)

(Hypsography Portrayal Type = Depression

Intermediate) and (Elevation Surface Category =

Land)


A - 95


Line

Symbol Information


Symbol Graphic Name: LN_Cyan_Contour_SnowIce_DepressionIntermediate Symbol Graphic


successive descending depression contour shall have ticks spaced 3.0mm, 2.0mm, 1.0mm, and 0.5mm. Depression ticks

point downhill.


Element Type: Line - Complex Element Reference: L00114Element Name: Cyan_SnowIce-DepressionIntermediate

Parameters:

Line Style: Cyan_0.1mmSolidLine



Colour Token: Cyan

Note: Each depression contour shall have ticks spaced equally pointing into the depression. Where the slope

of a depression is such that the contours become very close, the length of the depression ticks may be reduced

by 1/2 to achieve legibility.

Element Reference: L00108 Element Type: Line - SimpleElement Name: Cyan_0.1mmSolidLine


Parameters:

Line weight: 0.1mm

Colour Token: Cyan



Colour Token: Cyan


Parameters:



MGCP50K Elevation

Contour


depression intermediate (line)

(Hypsography Portrayal Type = Depression

Intermediate) and (Elevation Surface Category =

Snow Field and/or Ice Field)


A - 96


Line

Symbol Information


Symbol Graphic Name: LN_Dk-Brown1815_Contour_Land_MoundIndex Symbol Graphic

Symbol Placement Instructions: The linear symbology is applied to the geometry of the feature. Mound ticks point

downhill. Mounds within depressions are shown by ticks added to the lowest contour defining the mound.

Description: Dk-Brown1815 0.2mm Solid Line with repeating Dk-Brown1815 0.1mm wt 0.5 long ticks (2.0mm tick interval)

Element Type: Line - Complex Element Reference: L00115Element Name: Dk-Brown1815_Land-MoundIndex

Parameters:







Parameters:

Line weight: 0.2mm






Parameters:



MGCP50K Elevation

Contour

R000301 Elevation Contour / land mound index

(line)

(Hypsography Portrayal Type = Mound Index) and



A - 97


Line

Symbol Information


Symbol Graphic Name: LN_Dk-Brown1815_Contour_Land_MoundIntermediate Symbol Graphic

Symbol Placement Instructions: The linear symbology is applied to the geometry of the feature. Mound ticks point

downhill. Mounds within depressions are shown by ticks added to the lowest contour defining the mound.


Element Type: Line - Complex Element Reference: L00116Element Name: Dk-Brown1815_Land-MoundIntermediate

Parameters:







Parameters:

Line weight: 0.1mm






Parameters:



MGCP50K Elevation

Contour

R000302 Elevation Contour / land mound

intermediate (line)

(Hypsography Portrayal Type = Mound Intermediate)

and (Elevation Surface Category = Land)


Symbol Information


Symbol Graphic Name: LN_Dk-Brown1815_Contour_Land_QuarterAuxillary Symbol Graphic


Element Name: Dk-Brown1815_0.1mm-1.5mmLenDashLine Element Reference: L00117 Element Type: Line - Styled



Line Weight: 0.1mm

Dash Length: 1.5mm

Dash Spacing: 0.5mm


MGCP50K Elevation

Contour

R000303 Elevation Contour / land quarter

auxillary (line)

(Hypsography Portrayal Type = Quarter Auxilliary) and



A - 98


Line

Symbol Information


Symbol Graphic Name: LN_Cyan_Contour_SnowIce_QuarterAuxillary Symbol Graphic


Element Name: Cyan_0.1mm-1.5mmLenDash-0.5mmGapLine Element Reference: L00118 Element Type: Line - Styled



Line Weight: 0.1mm

Dash Length: 1.5mm

Dash Spacing: 0.5mm


MGCP50K Elevation

Contour

R000304 Elevation Contour / snow/ice quarter

auxillary (line)

(Hypsography Portrayal Type = Quarter Auxilliary) and


Field)


Symbol Information


Symbol Graphic Name: LN_Dk-Brown1815_Contour_Land_DepressionAuxillary Symbol Graphic

Symbol Placement Instructions: The linear symbology is applied to the geometry of the feature. This symbol is for

one-half of the interval.

Description: Dk-Brown1815 0.1mm Dash Line (0.1mm wt, 3.0mm dash, 0.5mm gap) with repeating Dk-Brown1815 0.1mm wt 0.5 long ticks

Element Type: Line - Complex Element Reference: L00119Element Name: Dk-Brown1815_Land-DepressionAuxillary

Parameters:

Line Style: Dk-Brown1815_0.1mm-3mmLenDashLine


Repeating Point Interval: Centred on each dash


Element Reference: L00109 Element Type: Line - StyledElement Name: Dk-Brown1815_0.1mm-3mmLenDashLine



Parameters:

Line weight: 0.1mm






Parameters:



MGCP50K Elevation

Contour


auxillary (line)

(Hypsography Portrayal Type = Depression Auxilliary)

and (Elevation Surface Category = Land)


A - 99


Line

Symbol Information


Symbol Graphic Name: LN_Cyan_Contour_SnowIce_DepressionAuxillary Symbol Graphic

Symbol Placement Instructions: The linear symbology is applied to the geometry of the feature. This symbol is for

one-half of the interval.

Description: Cyan 0.1mm Dash Line (0.1mm wt, 3.0mm dash, 0.5mm gap) with repeating Cyan 0.1mm wt 0.5 long ticks

Element Type: Line - Complex Element Reference: L00120Element Name: Cyan_SnowIce-DepressionAuxillary

Parameters:

Line Style: Cyan_0.1mm-3mmLenDashLine



Colour Token: Cyan

Element Reference: L00110 Element Type: Line - StyledElement Name: Cyan_0.1mm-3mmLenDashLine



Parameters:

Line weight: 0.1mm

Colour Token: Cyan



Colour Token: Cyan


Parameters:



MGCP50K Elevation

Contour


depression auxillary (line)

(Hypsography Portrayal Type = Depression Auxilliary)


Ice Field)


A - 100


Line

Symbol Information


Symbol Graphic Name: LN_Dk-Brown1815_Contour_Land_DepressionQuarterAuxillary Symbol Graphic



Element Type: Line - Complex Element Reference: L00179Element Name: Dk-Brown1815_Land-DepressionQuarterAuxillary

Parameters:

Line Style: Dk-Brown1815_0.1mm-1.5mmLenDashLine




Element Reference: L00117 Element Type: Line - StyledElement Name: Dk-Brown1815_0.1mm-1.5mmLenDashLine



Parameters:

Line weight: 0.1mm






Parameters:



MGCP50K Elevation

Contour


quarter auxillary (line)

(Hypsography Portrayal Type = Depression Quarter

Auxilliary) and (Elevation Surface Category = Land)


A - 101


Line

Symbol Information


Symbol Graphic Name: LN_Cyan_Contour_SnowIce_DepressionQuarterAuxillary Symbol Graphic



Element Type: Line - Complex Element Reference: L00180Element Name: Cyan_SnowIce-DepressionQuarterAuxillary

Parameters:

Line Style: Cyan_0.1mm-1.5mmLenDash-0.5mmGapLine



Colour Token: Cyan

Element Reference: L00118 Element Type: Line - StyledElement Name: Cyan_0.1mm-1.5mmLenDash-0.5mmGapLine



Parameters:

Line weight: 0.1mm

Colour Token: Cyan



Colour Token: Cyan


Parameters:



MGCP50K Elevation

Contour


depression quarter auxillary (line)

(Hypsography Portrayal Type = Depression Quarter

Auxilliary) and (Elevation Surface Category = Snow

Field and/or Ice Field)


A - 102

DN: 09-048 17 November 2009Embankment (DB090)Area

Symbol Information


Symbol Graphic Name: AR_Dk-Brown1815_Embankment_GreaterthanContourInterval Symbol Graphic

Symbol Placement Instructions: The line is placed around the perimeter of the feature. Ticks point downhill. NOTE:

Ensuring that ticks point downhill may not be an automatic process as some systems rely on information such as the

direction that the feature was captured.

ü


Element Type: Line - Complex Element Reference: L00101Element Name: Dk-Brown1815_Embankment-Outline

Parameters:





Note: Tick end is on and at 90 degrees to line, facing downhill



Parameters:

Line weight: 0.25mm






Parameters:



MGCP50K ADB090 R000083 Embankment / greater than contour

interval (area)

PFH >= contour interval



DN: 09-048 17 November 2009Embankment (DB090) (continued)

Area

Symbol Information


Symbol Graphic Name: AR_Dk-Brown1815_Embankment_LessthanContourInterval Symbol Graphic

Symbol Placement Instructions: The line is placed around the perimeter of the feature. Ticks point downhill. NOTE:

Ensuring that ticks point downhill may not be an automatic process as some systems rely on information such as the

direction that the feature was captured.


0.5mmGapTickLine










0.5mmGapTickLine














MGCP50K ADB090 R000440 Embankment / less than contour

interval (area)

PFH < contour interval


Line

A - 104


Line

Symbol Information


Symbol Graphic Name: LN_Dk-Brown1815_Embankment_GreaterthanContourInterval Symbol Graphic




ü


Element Type: Line - Complex Element Reference: L00066Element Name: Dk-Brown1815_Slope (High)

Parameters:








Parameters:

Line weight: 0.25mm






Parameters:



MGCP50K LDB090 R000189 Embankment / fill embankment /

greater than contour interval (line)

(FIC = 2) and (PFH >= contour interval)




Line

Symbol Information


Symbol Graphic Name: LN_Dk-Brown1815_Embankment_LessthanContourInterval Symbol Graphic





0.5mmGapTickLine










0.5mmGapTickLine














MGCP50K LDB090 R000439 Embankment / fill embankment / less

than contour interval (line)

(FIC = 2) and (PFH < contour interval)


A - 106


Line

Symbol Information


Symbol Graphic Name: LN_Dk-Brown1815_Embankment_DykeWithTransportation Symbol Graphic


Description: Dk-Brown1815 0.25mm Solid Line casing varying based upon separation; Ticks (0.25mm wt, 0.5mm long, 1.5mm interval)

Element Type: Line - Complex Element Reference: L00061Element Name: Dk-Brown1815_Levee

Parameters:

Line Style: Dk-Brown1815_0.25mmSolidCasedLine





Element Reference: L00020 Element Type: Line - SimpleElement Name: Dk-Brown1815_0.25mmSolidCasedLine

Description: Dk-Brown1815 0.25mm Solid Cased Line (0.25mm wt)

Parameters:

Line weight: 0.25mm


Note: Casing: Spacing is variable to the width of the over passing feature





Parameters:



MGCP50K LDB090 R000429 Embankment / dyke / railway, road, or

road and railway (line)

(FIC = 3) and (TRS = 12 or TRS = 13 or TRS = 14)


A - 107


Line

Symbol Information


Symbol Graphic Name: LN_Dk-Brown1815_Embankment_DykeWithoutTransportation Symbol Graphic



Element Type: Line - Complex Element Reference: L00059Element Name: Dk-Brown1815_Embankment (WithoutTransport)

Parameters:





Note: Tick is centred and 90 degrees to line. Tick Interval is 1.500mm



Parameters:

Line weight: 0.2mm






Parameters:



MGCP50K LDB090 R000430 Embankment / dyke / not railway, not

road, and not road and railway (line)

(FIC = 3) and (TRS <> 12 and TRS <> 13 and TRS <>

14)


Entrance and/or Exit (AQ090)Point

Symbol Information


Symbol Graphic Name: PT_Black_EntranceExit Symbol Graphic

Symbol Placement Instructions: The Headline of the entrance and/or exit symbol is placed at right angles to the

coinciding transportation feature and the Wingticks are placed away from the tunnel tube. Origin: Centre of line

ü

Element Name: Black_0.1mmTick-Entrance/Exit Element Reference: P00072 Element Type: Point - Simple

Description: Black Entrance/Exit with 0.1mm lineweight wingtick and 0.2mm headline


Headline: Line weight: 0.2mm Length: 2.0mm

Wingtick: Line weight: 0.1mm Length: 0.6mm

Note: Wing tick placed at 45 degree angle outward from centre of the headline end


MGCP50K PAQ090 R000349 Entrance and/or Exit / all (point)



DN: 09-048 17 November 2009Extraction Mine (AA010)Area

Symbol Information


Symbol Graphic Name: AR_Black_Mine Symbol Graphic

Symbol Placement Instructions: Shape centred inside area. The linestyle is applied to the perimeter of the area

feature.

ü

Colour Token: Black


Parameters:

Line Weight: 0.2mm

Dash Length: 2.0mm

Dash Spacing: 0.5mm



Description: This point element depicts a crossed black pickaxe and shovel

Element Name: Black_PickAxeShovel Element Reference: P00001 Element Type: Point - Shape


Detail: Black_PickAxeShovel

Note: See Element: Black_PickAxeShovel in Annex H for detailed drawing instructions.


MGCP50K AAA010 R000001 Extraction Mine / fully functional, or

unknown / not peatery (area)

(FUN = 0 or FUN = 6) and (MIN <> 8)


Symbol Information


Symbol Graphic Name: AR_Black_Mine_Abandoned Symbol Graphic

Symbol Placement Instructions: Shape centred inside area. The linestyle is applied to the perimeter of the area

feature.

Colour Token: Black


Parameters:

Line Weight: 0.2mm

Dash Length: 2.0mm

Dash Spacing: 0.5mm



Description: This point element depicts a crossed black pickaxe and shovel rotated 180 degrees.

Element Name: Black_PickAxeShovel180 Element Reference: P00002 Element Type: Point - Shape


Detail: Black_PickAxeShovel180

Orientation: Rotated 180 degrees

Note: See Element: Black_PickAxeShovel in Annex H for detailed drawing instructions. Image will need to be

rotated 180 degrees from image pictured in Annex H.


MGCP50K AAA010 R000002 Extraction Mine / abandoned / not

peatery (area)

(FUN = 2) and (MIN <> 8)



DN: 09-048 17 November 2009Extraction Mine (AA010) (continued)

Area

Symbol Information


Symbol Graphic Name: AR_Black_Mine_PeatCuttings Symbol Graphic

Symbol Placement Instructions: The area geometry is filled with the pattern (BlackPeateryFill). No symbology is

applied to the perimeter of the area geometry.

Parameters:

Description: Black staggered brick fill pattern

Element Type: Area - Pattern Element Reference: A00001Element Name: Black_PeateryFill

Colour Token: Black

Area Pattern: See Element: Black_PeateryFill in Annex I



MGCP50K AAA010 R000003 Extraction Mine / peatery (area) MIN = 8


Point

Symbol Information


Symbol Graphic Name: PT_Black_Mine_Operational Symbol Graphic

Symbol Placement Instructions: Origin: Intersection of handles

ü

Element Type: Point - Shape Element Reference: P00001Element Name: Black_PickAxeShovel






MGCP50K PAA010 R000192 Extraction Mine / fully functional, or

unknown / not peatery (point)

(FUN = 0 or FUN = 6) and (MIN <> 8)



DN: 09-048 17 November 2009Extraction Mine (AA010) (continued)

Point

Symbol Information


Symbol Graphic Name: PT_Black_Mine_Abandoned Symbol Graphic


Element Type: Point - Shape Element Reference: P00002Element Name: Black_PickAxeShovel180








MGCP50K PAA010 R000193 Extraction Mine / abandonded / not

peatery (point)

(FUN = 2) and (MIN <> 8)


Symbol Information


Symbol Graphic Name: PT_Black_Mine_PeatCutting Symbol Graphic

Symbol Placement Instructions: Origin: Centre of symbol

Element Type: Point - Simple Element Reference: P00084Element Name: Black_PeatCutting

Description: Peat Cutting Pattern


Line Weight: 0.1mm

Note: Five (5) rectangles, two (2) rows staggered, three (3) on the bottom row, two(2) on top. Width 1.5mm

Height 1.0mm


MGCP50K PAA010 R000341 Extraction Mine / peatery (point) (MIN = 8)


A - 111

DN: 09-048 17 November 2009Fairground (AK090)Area

Symbol Information


Symbol Graphic Name: AR_Black_Fairground Symbol Graphic


ü

Parameters:

Line Weight: 0.2mm

Dash Length: 2.0mm

Dash Spacing: 0.5mm



Colour Token: Black



MGCP50K AAK090 R000363 Fairground / all (area)


Fence (AL070)Line

Symbol Information


Symbol Graphic Name: LN_Black_Fence Symbol Graphic

Symbol Placement Instructions: X is centred both about its vertical to the dashed line and in spaces between dashed

lines

ü

Description: Black 0.2mm Dash Line (0.2mm wt, 5.0mm dash, 1.3mm gap) with 'X' (0.2mm wt, 1.3mm long)

Element Type: Line - Complex Element Reference: L00062Element Name: Black_Fence

Parameters:


Repeating Point: Black_0.2mm-1.3mmLenX

Repeating Point Interval: Centred in the space between dashes

Colour Token: Black

Note: The black X is centred both about its vertical to the dashed line and in spaces between dashed lines

Element Reference: L00033 Element Type: Line - StyledElement Name: Black_0.2mm-5mmLenDash-1.3mmGapLine



Parameters:

Line weight: 0.2mm

Colour Token: Black

Element Reference: P00046 Element Type: Point - SimpleElement Name: Black_0.2mm-1.3mmLenX

Description: Two Black lines (each 0.2mm lineweight, 1.3mm length) intersect at a 45 degree angle to form an "X". Intersection is at the centre of each

of the 2 line segments.

Colour Token: Black


Parameters:

Orientation: X lines of symbol are 45 degree angles and are centred one to another


MGCP50K LAL070 R000115 Fence / all (line)



DN: 09-048 17 November 2009Ferry Crossing (AQ070)Line

Symbol Information


Symbol Graphic Name: LN_Black_FerryCrossing Symbol Graphic


ü




Line Weight: 0.2mm

Dash Length: 1.0mm

Dash Spacing: 0.5mm


MGCP50K LAQ070 R000148 Ferry Crossing / all (line)


Point

Symbol Information


Symbol Graphic Name: PT_FerryCrossing Symbol Graphic


ü

POINT LABEL ONLY


MGCP50K PAQ070 R000253 Ferry Crossing / all (point)



DN: 09-048 17 November 2009Flare Pipe (AF070)Point

Symbol Information


Symbol Graphic Name: PT_Black_FlarePipe Symbol Graphic


ü








MGCP50K PAF070 R000343 Flare Pipe / non-obstruction / not

offshore (point)

(HGT < 46) and (SRL <> 1)


Symbol Information


Symbol Graphic Name: PT_Blue072_FlarePipe_VO Symbol Graphic








MGCP50K PAF070 R000210 Flare Pipe / obstruction or offshore

(point)

(HGT >= 46) or (SRL = 1)



DN: 09-048 17 November 2009Flare Pipe (AF070) (continued)

Point

Symbol Information


Symbol Graphic Name: PT_Blue072_FlarePipe_MultipleVOs Symbol Graphic

Symbol Placement Instructions: Use this "multiple vertical obstruction" symbol rather than the Flare Pipe single vertical








MGCP50K PAF070 R000468 Flare Pipe / multiple obstructions

(point)

*None


A - 115



DN: 09-048 17 November 2009Ford (BH070)Line

Symbol Information


Symbol Graphic Name: LN_Black_Ford Symbol Graphic


ü

Element Name: Black_Ford Element Reference: L00197 Element Type: Line - Complex

Description: A black dashed line (0.2mm wt, 2.0mm Dash Length, 0.5mm Dash Gap) with cyan "V"s attached at the start and end of the line. The "V"s

apex point inward towards the related hydrographic feature



Parameters:

Line Style: Black_0.2mm-2mmLenDash-0.5mmGapLine Colour Token: Black














Colour Token: Cyan

Length: 0.7mm

Parameters:

Line weight: 0.3mm




MGCP50K LBH070 R000176 Ford / all (line)


Point


DN: 09-048 17 November 2009Ford (BH070) (continued)

Point

Symbol Information


Symbol Graphic Name: PT_Cyan_Ford Symbol Graphic

Symbol Placement Instructions: Two cyan "V"s touching at their apexes. The "V"s point in towards the related

hydrographic feature.

ü

Element Name: Cyan_PT_Ford Element Reference: P00125 Element Type: Point - Complex

Description: Two Cyan "V" elements touch at their apexes.


Point 1 Name: Cyan_0.3mm-0.7mmLenV

Point 2 Name: Cyan_0.3mm-0.7mmLenV












MGCP50K PBH070 R000260 Ford / all (point)


Forest Clearing (EC060)Area

Symbol Information


Symbol Graphic Name: AR_Paper-White_ForestClearing Symbol Graphic



ü

Parameters:

Description: Paper-White Solid Fill

Element Type: Area - Fill Element Reference: A00046Element Name: Paper-White_ForestClearing

Colour Token: Paper-White


MGCP50K AEC060 R000322 Forest Clearing / all (area)



DN: 09-048 17 November 2009Fortification (AH050)Area

Symbol Information


Symbol Graphic Name: AR_Black_Fortification Symbol Graphic

Symbol Placement Instructions: Solid line is placed around the perimeter of the feature.

ü

Parameters:

Line Weight: 0.2mm



Colour Token: Black



MGCP50K AAH050 R000017 Fortification / all (area)


Point

Symbol Information


Symbol Graphic Name: PT_Black_Fortification Symbol Graphic

Symbol Placement Instructions: Origin: Centre of square.

ü

Element Type: Point - Shape Element Reference: P00108Element Name: Black_Fortification

Description: A Black open square (0.1 mm wt, 0.8 mm long/wide) with 4 black 0.5 mm long ticks (0.1 mm wt) extending out from each corner of the

square at an angle of 45, 135, 225, or 315 degrees.


Detail: Black_Fortification

Note: See Element: Black_Fortification in Annex H for detailed drawing instructions.


MGCP50K PAH050 R000211 Fortification / all (point)



DN: 09-048 17 November 2009Geologic Fault (DB110)Line

Symbol Information


Symbol Graphic Name: LN_Dk-Brown1815_GeologicFault Symbol Graphic


ü




Line Weight: 0.2mm


MGCP50K LDB110 R000190 Geologic Fault / all (line)



DN: 09-048 17 November 2009Geothermal Outlet (DB115)Area

Symbol Information


Symbol Graphic Name: AR_Dk-Brown1815_GeothermalOutlet Symbol Graphic

Symbol Placement Instructions: The line is placed around the perimeter of the feature.

ü

Parameters:

Line Weight: 0.3mm


Element Name: Dk-Brown1815_0.3mmSolidLine




MGCP50K ADB115 R000084 Geothermal Outlet / all (area)


Point

Symbol Information


Symbol Graphic Name: PT_Dk-Brown1815_GeothermalOutlet Symbol Graphic


ü

Element Type: Point - Shape Element Reference: P00027Element Name: Dk-Brown1815_Geothermal

Description: A Dk-Brown1815 Geothermal


Detail: Dk-Brown1815_Geothermal

Orientation: Tail of feature is downstream to drainage or to the lines of latitude when drain is not present

Note: See Element: Dk-Brown1815_Geothermal in Annex H for detailed drawing instructions.


MGCP50K PDB115 R000275 Geothermal Outlet / all (point)



DN: 09-048 17 November 2009Glacier (BJ030)Area

Symbol Information


Symbol Graphic Name: AR_Cyan_Glacier Symbol Graphic


ü

Colour Token: Cyan

Element Name: Cyan_GlacierFill Element Reference: A00017 Element Type: Area - Pattern

Description: Cyan Glacier Fill

Parameters:

Area Pattern: See Element: Cyan_GlacierFill in Annex I





Line Weight: 0.2mm

Dash Length: 1.0mm

Dash Spacing: 0.5mm


MGCP50K ABJ030 R000075 Glacier / all (area)


Golf Course (AK100)Area

Symbol Information


Symbol Graphic Name: AR_Black_GolfCourse Symbol Graphic


ü

Parameters:

Line Weight: 0.2mm

Dash Length: 2.0mm

Dash Spacing: 0.5mm



Colour Token: Black



MGCP50K AAK100 R000021 Golf Course / all (area)



DN: 09-048 17 November 2009Grain Elevator (AM030)Area

Symbol Information


Symbol Graphic Name: AR_Black_GrainElevator Symbol Graphic



ü

Parameters:



Colour Token: Black

Note: Solid Fill


MGCP50K AAM030 R000045 Grain Elevator / all (area)


Point

Symbol Information


Symbol Graphic Name: PT_Black_GrainElevator Symbol Graphic


ü








MGCP50K PAM030 R000243 Grain Elevator / non-obstruction

(point)

(HGT < 46)



DN: 09-048 17 November 2009Grain Elevator (AM030) (continued)

Point

Symbol Information


Symbol Graphic Name: PT_Blue072_GrainElevator_VO Symbol Graphic








MGCP50K PAM030 R000244 Grain Elevator / single obstruction

(point)

(HGT >= 46)


Symbol Information


Symbol Graphic Name: PT_Blue072_GrainElevator_MultipleVOs Symbol Graphic

Symbol Placement Instructions: Use this "multiple vertical obstruction" symbol rather than the Grain Elevator single


of dot







MGCP50K PAM030 R000469 Grain Elevator / multiple obstructions

(point)

*None


A - 123



DN: 09-048 17 November 2009Grain Storage Structure (AM020)Area

Symbol Information


Symbol Graphic Name: AR_Dk-Brown1815_GrainStorage Symbol Graphic



ü

Parameters:

Description: Dk-Brown1815 Area Solid Fill

Element Type: Area - Fill Element Reference: A00054Element Name: Dk-Brown1815_SolidAreaFill


Note: Solid Fill


MGCP50K AAM020 R000044 Grain Storage Structure / all (area)


Point

Symbol Information


Symbol Graphic Name: PT_Dk-Brown1815_GrainStorage Symbol Graphic


ü

Element Type: Point - Simple Element Reference: P00099Element Name: Dk-Brown1815_0.5mmSquareFilled

Description: A Dk-Brown1815 filled square with all sides 0.5mm long/wide


Length: 0.5mm


MGCP50K PAM020 R000242 Grain Storage Structure /


(HGT < 46)



DN: 09-048 17 November 2009Grain Storage Structure (AM020) (continued)

Point

Symbol Information


Symbol Graphic Name: PT_Blue072_GrainStorageStructure_VO Symbol Graphic








MGCP50K PAM020 R000441 Grain Storage Structure / single

obstruction (point)

(HGT >= 46)


Symbol Information


Symbol Graphic Name: PT_Blue072_GrainStorageStructure_MultipleVOs Symbol Graphic

Symbol Placement Instructions: Use this "multiple vertical obstruction" symbol rather than the Grain Storage Structure


Centre of dot







MGCP50K PAM020 R000484 Grain Storage Structure / multiple


*None


A - 125



DN: 09-048 17 November 2009Grassland (EB010)Area

Symbol Information


Symbol Graphic Name: AR_Green362_Grassland Symbol Graphic


ü

Parameters:

Description: Green362 Grassland Fill

Element Type: Area - Pattern Element Reference: A00026Element Name: Green362_GrasslandFill


Area Pattern: See Element: Green362_GrasslandFill in Annex I



MGCP50K AEB010 R000097 Grassland / all (area)



DN: 09-048 17 November 2009Groin (BB043)Area

Symbol Information


Symbol Graphic Name: AR_Black_Groin Symbol Graphic


ü

Parameters:

Line Weight: 0.2mm



Colour Token: Black



MGCP50K ABB043 R000373 Groin / not covers and uncovers (area) (WLE <> 4)


Symbol Information


Symbol Graphic Name: AR_BlackCyan_Groin Symbol Graphic





Description: Cyan-31ScreenFill (area fill) coincident with Black-12ScreenFill-15degree (area fill)

Parameters:






Element Reference: A00051Element Name: Groin-CoversUncovers










Dash Spacing: 0.5mm

Dash Length: 1.0mm

Parameters:

Line Weight: 0.2mm

Colour Token: Black


MGCP50K ABB043 R000374 Groin / covers and uncovers (area) (WLE = 4)


Line


DN: 09-048 17 November 2009Groin (BB043) (continued)

Line

Symbol Information


Symbol Graphic Name: LN_Black_Groin Symbol Graphic

Symbol Placement Instructions: Symbol is applied to the linear geometry

ü




Line Weight: 0.2mm


MGCP50K LBB043 R000375 Groin / not covers and uncovers (line) (WLE <> 4)


Symbol Information


Symbol Graphic Name: LN_Black_Groin_CoversUncovers Symbol Graphic

Symbol Placement Instructions: Symbolize the Groin feature the same as a Breakwater feature.




Line Weight: 0.2mm

Dash Length: 1.0mm

Dash Spacing: 0.5mm


MGCP50K LBB043 R000376 Groin / covers and uncovers (line) (WLE = 4)


Harbour (BB005)Area

Symbol Information


Symbol Graphic Name: PT_Harbour Symbol Graphic


ü

AREA LABEL ONLY


MGCP50K ABB005 R000377 Harbour / all (area)



DN: 09-048 17 November 2009Hazardous Rock (BD130)Point

Symbol Information


Symbol Graphic Name: PT_Blue072_HazardousRock_Dry Symbol Graphic


ü

Element Type: Point - Shape Element Reference: P00120Element Name: Blue072_0.3mmDotFilled

Description: A Blue072 0.3mm diameter filled circle (or dot)


Detail: Blue072_0.3mmDotFilled

Note: See Element Blue072_0.3mmDotFilled in Annex H for detailed drawing instructions


MGCP50K PBD130 R000378 Hazardous Rock / always dry (point) (WLE = 2)


Symbol Information


Symbol Graphic Name: PT_Black_HazardousRock_CoversUncovers Symbol Graphic

Symbol Placement Instructions: Origin: Where the line segments all intersect each other

Element Name: Black_HazardousRock(Covers/Uncovers) Element Reference: P00096 Element Type: Point - Complex

Description: Combination of BlackStarburst(Rock) and BlackDotExterior(Rock)


Point 1 Name: Black_Starburst(Rock)

Point 2 Name: Black_DotExterior(Rock)

Element Name: Black_Starburst(Rock) Element Reference: P00095 Element Type: Point - Simple

Description: Lines (lineweight 0.1mm, length 1.5mm) oriented 60 degrees apart, starting at 30 degrees from North.



Note: Lines (lineweight 0.1mm, length 1.5mm) oriented 60 degrees apart, starting at 30 degrees from North.

Element Name: Black_DotExterior(Rock) Element Reference: P00093 Element Type: Point - Simple

Description: Black dots (diameter 0.25mm) are placed around a circle (diameter 3.0mm) centre of dots every 36 degrees starting 18 degrees east of n

Note: There are Black "dots" (diameter of dots 0.25mm) placed around the perimeter of a circle (3.0mm in

diameter), the centre of the dots are every 36 degrees starting 18 degrees east of north.

Colour Token: Black


MGCP50K PBD130 R000379 Hazardous Rock / not always dry

(point)

(WLE <> 2)



DN: 09-048 17 November 2009Heating Facility (AD050)Area

Symbol Information


Symbol Graphic Name: AR_Black_HeatingFacility Symbol Graphic


ü

Parameters:

Line Weight: 0.2mm

Dash Length: 2.0mm

Dash Spacing: 0.5mm



Colour Token: Black



MGCP50K AAD050 R000380 Heating Facility / all (area)


Point

Symbol Information


Symbol Graphic Name: PT_Black_HeatingFacility Symbol Graphic


ü




Length: 0.8mm


MGCP50K PAD050 R000381 Heating Facility / all (point)



DN: 09-048 17 November 2009Hedgerow (EA020)Line

Symbol Information


Symbol Graphic Name: LN_Green362_Hedgerow Symbol Graphic


ü

Description: Green362_0.1mmOpenCircle circles repeating along the linear feature.

Element Type: Line - Complex Element Reference: L00060Element Name: Green362_Hedgerow

Parameters:

Line Style: 0mmLine

Repeating Point: Green362_0.1mmOpenCircle



Note: The repeating point interval is such that the consecutive circles touch edges (centres of consecutive

circles are 0.500mm apart)

Element Reference: L00145 Element Type: Line - SimpleElement Name: 0mmLine

Description: 0mm Line weight line. This is a place holder for lines that do not have any line component but only a repeating point along the line.

Parameters:

Line weight: 0.0mm

Colour Token: Black

Element Reference: P00111 Element Type: Point - SimpleElement Name: Green362_0.1mmOpenCircle

Description: A Green362 0.1mm wt. 0.4mm diameter open circle


Line weight: 0.1mm

Parameters:

Diameter: 0.4mm


MGCP50K LEA020 R000191 Hedgerow / all (line)



DN: 09-048 17 November 2009Helipad (GB030)Point

Symbol Information


Symbol Graphic Name: PT_Blue072_Helipad Symbol Graphic


ü

Element Name: Blue072_Helipad Element Reference: P00090 Element Type: Point - Complex

Description: A Blue072 open circle with H centred inside the circle


Point 1 Name: Blue072_0.4mmOpenCircle

Point 2 Name: Blue072_H

Note: Open Circle with H centred inside it

Element Name: Blue072_0.4mmOpenCircle Element Reference: P00088 Element Type: Point - Simple

Description: A Blue072 0.4mm lineweight open circle with a 5.0mm diameter


Lineweight: 0.4mm Diameter: 5.0mm

Note: Open Circle with lineweight of 0.4mm and diameter of 5.0mm

Element Name: Blue072_H Element Reference: P00086 Element Type: Point - Simple

Description: A Blue072 letter 'H'


Lineweight: 0.4mm

Note: Two (2) vertical lines with a lineweight of 0.4mm and a height of 3.0mm connected by a horizontal line

with a lineweight of 0.4mm and a length of 2.0mm to form a capital letter 'H'


MGCP50K PGB030 R000350 Helipad / non-hospital (point) (HAF <> 3)



DN: 09-048 17 November 2009Helipad (GB030) (continued)

Point

Symbol Information


Symbol Graphic Name: PT_Blue072_Helipad_Hospital Symbol Graphic


Element Name: Blue072_HospitalHelipad Element Reference: P00089 Element Type: Point - Complex

Description: A Blue072 open square with H centred inside the square


Point 1 Name: Blue072_0.4mm-5.0mmwideSquareOpen

Point 2 Name: Blue072_H

Note: Open Square with H centred inside it





Note: Open Square with lineweight of 0.4mm and sides of the square are 5.0mm long

Element Name: Blue072_H Element Reference: P00086 Element Type: Point - Simple



Lineweight: 0.4mm

Note: Two (2) vertical lines with a lineweight of 0.4mm and a height of 3.0mm connected by a horizontal line

with a lineweight of 0.4mm and a length of 2.0mm to form a capital letter 'H'


MGCP50K PGB030 R000351 Helipad / hospital (point) (HAF = 3)


Heliport (GB035)Area

Symbol Information


Symbol Graphic Name: AR_Black_Heliport Symbol Graphic


ü

Parameters:

Line Weight: 0.2mm

Dash Length: 2.0mm

Dash Spacing: 0.5mm



Colour Token: Black



MGCP50K AGB035 R000110 Heliport / all (area)



DN: 09-048 17 November 2009Holding Pen (AJ030)Area

Symbol Information


Symbol Graphic Name: AR_Black_HoldingPen Symbol Graphic


ü

Parameters:

Line Weight: 0.2mm

Dash Length: 2.0mm

Dash Spacing: 0.5mm



Colour Token: Black



MGCP50K AAJ030 R000019 Holding Pen / all (area)


Ice Cliff (BJ040)Line

Symbol Information


Symbol Graphic Name: LN_Cyan_IceCliff Symbol Graphic




ü

Description: Cyan 0.2mm Dash Line (0.2mm wt, 5.0mm dash, 0.5mm gap) with Tick (0.1mm w,t 0.5mm long, 0.5mm interval)

Element Type: Line - Complex Element Reference: L00063Element Name: Cyan_IceCliff

Parameters:

Line Style: Cyan_0.2mm-5mmLenDash-0.5mmGapLine



Colour Token: Cyan

Note: Tick end is on and at 90 degrees to dashed line, facing downhill

Element Reference: L00042 Element Type: Line - StyledElement Name: Cyan_0.2mm-5mmLenDash-0.5mmGapLine



Parameters:

Line weight: 0.2mm

Colour Token: Cyan



Colour Token: Cyan


Parameters:



MGCP50K LBJ040 R000186 Ice Cliff / all (line)



DN: 09-048 17 November 2009Ice Peak (BJ060)Point

Symbol Information


Symbol Graphic Name: PT_Dk-Brown1815_IcePeak Symbol Graphic


ü

Element Type: Point - Simple Element Reference: P00066Element Name: Dk-Brown1815_0.15mmTickCircle

Description: Dk-Brown1815 ticks (0.15mm lineweight, 0.6mm long) radiating out from an imaginary circle (diameter 1.5mm)



Orientation: Ticks are oriented 45 degrees from each other

Note: Tick Interval: 0.5mm radiating from the centre of the circular area Tick Placement: Clockwise around an

imaginary circle diameter of 1.5mm starting at the 0 degrees position in 45 degree increments.


MGCP50K PBJ060 R000272 Ice Peak / rock, unknown, or other

(point)

(SMC = 0 or SMC = 84 or SMC = 999)


Symbol Information


Symbol Graphic Name: PT_Cyan_IcePeak Symbol Graphic


Element Type: Point - Simple Element Reference: P00056Element Name: Cyan_0.15mm-0.6mmLenTickCircle

Description: Cyan ticks (0.15mm lineweight, 0.6mm long) radiating out from an imaginary circle (diameter 1.500mm)




Note: Tick Interval: 0.5mm radiating from centre of circular area. Tick placement: clockwise around an

imaginary circle diameter of 1.5mm starting at the 0 degree position in 45 degree increments


MGCP50K PBJ060 R000273 Ice Peak / frozen water (point) SMC = 103



DN: 09-048 17 November 2009Ice Route (AQ075)Line

Symbol Information


Symbol Graphic Name: LN_Black_IceRoute Symbol Graphic


ü




Line Weight: 0.2mm

Dash Length: 2.0mm

Dash Spacing: 0.5mm


MGCP50K LAQ075 R000412 Ice Route / all (line)


International Date Line (International Date Line)Line

Symbol Information


Symbol Graphic Name: LN_Black_InternationalDateLine Symbol Graphic

Symbol Placement Instructions: Symbology is applied to the geometry of the linear feature.

ü




Line Weight: 0.5mm

Dash Length: 6.0mm

Dash Spacing: 3.8mm


MGCP50K International

Date Line

R000316 International Date Line / all (line)



DN: 09-048 17 November 2009Island (BA030)Area

Symbol Information


Symbol Graphic Name: AR_Island Symbol Graphic


ü

AREA LABEL ONLY


MGCP50K ABA030 R000053 Island / all (area)



DN: 09-048 17 November 2009Lake (BH080)Area

Symbol Information


Symbol Graphic Name: AR_Cyan_Lake_Perennial Symbol Graphic

Symbol Placement Instructions: The fill colour is used to fill the extents of the area geometry. The line is placed

around the perimeter of the feature

ü




Parameters:





Line Weight: 0.2mm


MGCP50K ABH080 R000058 Lake / perennial (area) HYP = 1


Symbol Information


Symbol Graphic Name: AR_Cyan_Lake_Non-perennial Symbol Graphic

Symbol Placement Instructions: The linear pattern is used to fill the extents of the area geometry. The dashed line is

placed around the perimeter of the area geometry

Colour Token: Cyan

Element Name: Cyan_LP15Fill Element Reference: A00021 Element Type: Area - Pattern

Description: Cyan Diagonal Line Fill - 35% coverage, 40L, 45 degree angle lines.

Parameters:

Area Pattern: See Element: Cyan_LP15Fill in Annex I


Note: Line Pattern #15




Line Weight: 0.2mm

Dash Length: 2.0mm

Dash Spacing: 0.5mm


MGCP50K ABH080 R000059 Lake / intermittent or unknown (area) (HYP = 0 or HYP = 2)



DN: 09-048 17 November 2009Lake (BH080) (continued)

Area

Symbol Information


Symbol Graphic Name: AR_Cyan_Lake_Dry Symbol Graphic

Symbol Placement Instructions: The area pattern is used to fill the extents of the area geometry. The dashed line is

placed around the perimeter of the feature

Colour Token: Cyan



Parameters:






Line Weight: 0.2mm

Dash Length: 2.0mm

Dash Spacing: 0.5mm


MGCP50K ABH080 R000060 Lake / dry (area) HYP = 4


A - 139

DN: 09-048 17 November 2009Land Subject to Inundation (BH090)Area

Symbol Information


Symbol Graphic Name: AR_Cyan_LSI_Natural Symbol Graphic


ü

Parameters:

Description: Cyan Land Subject to Inundation Fill

Element Type: Area - Pattern Element Reference: A00015Element Name: Cyan_LSIFill

Colour Token: Cyan

Area Pattern: See Element: Cyan_LSIFill in Annex I



MGCP50K ABH090 R000061 Land Subject to Inundation / not

controlled, or not man-made (area)

(CNS <> 1001) or (ASC <> 1001)


Symbol Information


Symbol Graphic Name: AR_Cyan_LSI_Controlled Symbol Graphic


Colour Token: Cyan

Element Name: Cyan_LSIFill Element Reference: A00015 Element Type: Area - Pattern


Parameters:

Area Pattern: See Element: Cyan_LSIFill in Annex I





Line Weight: 0.2mm

Dash Length: 2.0mm

Dash Spacing: 0.5mm


MGCP50K ABH090 R000062 Land Subject to Inundation / controlled

/ man-made(area)

CNS = 1001 and ASC = 1001



DN: 09-048 17 November 2009Land Water Boundary (BA010)Line

Symbol Information


Symbol Graphic Name: LN_Cyan_LandWaterBoundary_Dry Symbol Graphic


ü




Line Weight: 0.2mm


MGCP50K LBA010 R000382 Land Water Boundary / stony, rubble,

sandy, shingly, unknown or other (line)

(SLT = 0 or SLT = 10 or SLT = 11 or SLT = 13 or SLT

= 14 or SLT = 999)


Symbol Information


Symbol Graphic Name: LN_Cyan_LandWaterBoundary_Wet Symbol Graphic





Line Weight: 0.2mm

Dash Length: 2.0mm

Dash Spacing: 0.5mm


MGCP50K LBA010 R000383 Land Water Boundary / mangrove, or

marshy (line)

(SLT = 6 or SLT = 8)



DN: 09-048 17 November 2009Launch Pad (GB040)Point

Symbol Information


Symbol Graphic Name: PT_Black_LaunchPad Symbol Graphic


ü








MGCP50K PGB040 R000413 Launch Pad / all (point)



DN: 09-048 17 November 2009Lighthouse (BC050)Point

Symbol Information


Symbol Graphic Name: PT_Black_Lighthouse Symbol Graphic

Symbol Placement Instructions: The symbology is applied to the geometry of the feature. Origin: Centre of dot

ü








MGCP50K PBC050 R000384 Lighthouse / non-obstruction (point) (HGT < 46)


Symbol Information


Symbol Graphic Name: PT_Blue072_Lighthouse_VO Symbol Graphic








MGCP50K PBC050 R000385 Lighthouse / single obstruction (point) (HGT >= 46)



DN: 09-048 17 November 2009Lighthouse (BC050) (continued)

Point

Symbol Information


Symbol Graphic Name: PT_Blue072_Lighthouse_MultipleVOs Symbol Graphic

Symbol Placement Instructions: Use this "multiple vertical obstruction" symbol rather than the Lighthouse single


of dot







MGCP50K PBC050 R000470 Lighthouse / multiple obstructions

(point)

*None


A - 144



DN: 09-048 17 November 2009Lock (BI030)Area

Symbol Information


Symbol Graphic Name: AR_Black_Lock Symbol Graphic

Symbol Placement Instructions: Lock ends positioned with apex at 45 degrees pointing upstream. Lock Sides: Black

04 Solid Line Lock Ends: Black 025 Solid Line. The line is placed around the perimeter of the feature

ü

Element Name: Black_Lock-Outline Element Reference: L00102 Element Type: Line - Complex

Description: Black 04 Solid Lines along edges with Black 025 Solid Lines at 45 degree pointing upstream




Note: Lock ends positioned with apex at 45 degrees pointing upstream




Line Weight: 0.4mm




Line Weight: 0.25mm


MGCP50K ABI030 R000073 Lock / all (area)


Line


DN: 09-048 17 November 2009Lock (BI030) (continued)

Line

Symbol Information


Symbol Graphic Name: LN_Black_Lock Symbol Graphic

Symbol Placement Instructions: The linear symbology is applied to the geometry of the feature. The apex of the "V"

placed at both ends of the line point upstream.

ü

Element Name: Black_Lock_Line Element Reference: L00181 Element Type: Line - Complex

Description: Black 0.3mm Solid Line with Black 0.1mm "V" afixed to each end. The apex of the "V" points upstream.

Fix at Start: Black_0.1mmV

Fix at End: Black_0.1mmV

Parameters:


Note: The apex of the "V" placed at both ends of the line points upstream.





Line Weight: 0.3mm

Element Name: Black_0.1mmV Element Reference: P00035 Element Type: Point - Simple




Orientation: Apex is centred on single line drain. Apex points upstream.


Element Name: Black_0.1mmV Element Reference: P00035 Element Type: Point - Simple


Colour Token: Black

Length: 0.8mm

Parameters:

Line weight: 0.1mm




MGCP50K LBI030 R000339 Lock / all (line)


Point


DN: 09-048 17 November 2009Lock (BI030) (continued)

Point

Symbol Information


Symbol Graphic Name: PT_Black_Lock Symbol Graphic

Symbol Placement Instructions: Apex is centred on single line drain. Apex points upstream. Origin: Apex

ü

Element Type: Point - Simple Element Reference: P00035Element Name: Black_0.1mmV







MGCP50K PBI030 R000269 Lock / all (point)


Marine Farm (BH050)Area

Symbol Information


Symbol Graphic Name: AR_Cyan-31_MarineFarm Symbol Graphic

Symbol Placement Instructions: The linear symbology is placed around the perimeter of the feature and the area

geometry of the feature is filled with the specified colour.

ü




Parameters:





Line Weight: 0.2mm


MGCP50K ABH050 R000386 Marine Farm / all (area)



DN: 09-048 17 November 2009Maritime Area (Maritime Area)Line

Symbol Information


Symbol Graphic Name: LN_Black_MaritimeArea_International Symbol Graphic

Symbol Placement Instructions: Symbology is applied to the geometry of the linear feature.

ü

Description: Black 0.25mm Dash Line (0.25mm wt, 3.0mm dash, 1.0mm gap) and 0.25mm, 1.5mm long tick

Element Type: Line - Complex Element Reference: L00136Element Name: Black_MaritimeArea-International

Parameters:

Line Style: Black_0.25mm-3mmLenDash-1mmGapLine

Repeating Point: Black_0.25mm-1.5mmLenTick

Repeating Point Interval: centred on every second dash

Colour Token: Black

Note: The tick is centred on every second dash

Element Reference: L00135 Element Type: Line - StyledElement Name: Black_0.25mm-3mmLenDash-1mmGapLine



Parameters:

Line weight: 0.25mm

Colour Token: Black

Element Reference: P00083 Element Type: Point - SimpleElement Name: Black_0.25mm-1.5mmLenTick

Description: A Black line segment with line weight of 0.250mm and a length of 1.5mm.

Colour Token: Black


Parameters:

Orientation: 90 degrees to line and centred on the line


MGCP50K Maritime

Area

R000353 Maritime Area / all (line) Controlling Authority = International


Maritime Signal Station (BB155)Point

Symbol Information


Symbol Graphic Name: PT_Black_MaritimeSignalStation Symbol Graphic


ü




Length: 0.5mm


MGCP50K PBB155 R000387 Maritime Signal Station / all (point)



DN: 09-048 17 November 2009Marsh (ED010)Area

Symbol Information


Symbol Graphic Name: AR_Cyan_Marsh Symbol Graphic


ü

Parameters:



Colour Token: Cyan




MGCP50K AED010 R000106 Marsh / all (area)



DN: 09-048 17 November 2009Memorial Monument (AL130)Point

Symbol Information


Symbol Graphic Name: PT_Black_Monument Symbol Graphic


ü








MGCP50K PAL130 R000238 Memorial Monument / non-obstruction

(point)

(HGT < 46)


Symbol Information


Symbol Graphic Name: PT_Blue072_Monument_VO Symbol Graphic








MGCP50K PAL130 R000239 Memorial Monument / single

obstruction (point)

(HGT >= 46)



DN: 09-048 17 November 2009Memorial Monument (AL130) (continued)

Point

Symbol Information


Symbol Graphic Name: PT_Blue072_MemorialMonument_MultipleVOs Symbol Graphic

Symbol Placement Instructions: Use this "multiple vertical obstruction" symbol rather than the Memorial Monument


Centre of dot







MGCP50K PAL130 R000471 Memorial Monument / multiple


*None


A - 151



DN: 09-048 17 November 2009Military Installation (SU001)Area

Symbol Information


Symbol Graphic Name: AR_Black_MilitaryInstallation Symbol Graphic

Symbol Placement Instructions: Use the dashed line for the perimeter of this symbol.

ü




Line Weight: 0.2mm

Dash Length: 2.0mm

Dash Spacing: 0.5mm


MGCP50K ASU001 R000352 Military Installation / all (area)


Point

Symbol Information


Symbol Graphic Name: PT_Black_MilitaryInstallation Symbol Graphic

Symbol Placement Instructions: Origin: Centre of filled square

ü




Length: 0.5mm


MGCP50K PSU001 R000284 Military Installation / all (point)



DN: 09-048 17 November 2009Mineral Pile (AM040)Area

Symbol Information


Symbol Graphic Name: AR_Black_MineralPile Symbol Graphic


ü

Parameters:

Line Weight: 0.2mm

Dash Length: 2.0mm

Dash Spacing: 0.5mm



Colour Token: Black



MGCP50K AAM040 R000319 Mineral Pile / all (area)


Point

Symbol Information


Symbol Graphic Name: PT_Black_MineralPile Symbol Graphic


ü








MGCP50K PAM040 R000348 Mineral Pile / non-obstruction (point) (HGT < 46)



DN: 09-048 17 November 2009Mineral Pile (AM040) (continued)

Point

Symbol Information


Symbol Graphic Name: PT_Blue072_MineralPile_VO Symbol Graphic








MGCP50K PAM040 R000347 Mineral Pile / single obstruction (point) (HGT >= 46)


Symbol Information


Symbol Graphic Name: PT_Blue072_MineralPile_MultipleVOs Symbol Graphic

Symbol Placement Instructions: Use this "multiple vertical obstruction" symbol rather than the Mineral Pile single


of dot







MGCP50K PAM040 R000472 Mineral Pile / multiple obstructions

(point)

*None


A - 154



DN: 09-048 17 November 2009Mooring Mast (AQ110)Point

Symbol Information


Symbol Graphic Name: PT_Black_MooringMast Symbol Graphic


ü








MGCP50K PAQ110 R000388 Mooring Mast / non-obstruction (point) (HGT < 46)


Symbol Information


Symbol Graphic Name: PT_Blue072_MooringMast_VO Symbol Graphic








MGCP50K PAQ110 R000389 Mooring Mast / single obstruction

(point)

(HGT >= 46)



DN: 09-048 17 November 2009Mooring Mast (AQ110) (continued)

Point

Symbol Information


Symbol Graphic Name: PT_Blue072_MooringMast_MultipleVOs Symbol Graphic

Symbol Placement Instructions: Use this "multiple vertical obstruction" symbol rather than the Mooring Mast single


of dot







MGCP50K PAQ110 R000473 Mooring Mast / multiple obstructions

(point)

*None


Moraine (BJ020)Area

Symbol Information


Symbol Graphic Name: AR_Dk-Brown1815_Moraine Symbol Graphic

Symbol Placement Instructions: The area geometry of the feature is filled with the specified pattern. No linear


ü

Parameters:

Description: Dk-Brown1815 Moraine Fill

Element Type: Area - Pattern Element Reference: A00022Element Name: Dk-Brown1815_MoraineFill


Area Pattern: See Element: Dk-Brown1815_MoraineFill in Annex I



MGCP50K ABJ020 R000074 Moraine / all (area)





DN: 09-048 17 November 2009Mountain Pass (DB150)Point

Symbol Information


Symbol Graphic Name: PT_Black_MountainPass Symbol Graphic

Symbol Placement Instructions: Origin: Centre of symbol.

ü

Element Type: Point - Shape Element Reference: P00029Element Name: Black_0.2mmMountainPass

Description: A pair of black parentheses which open away from each other.


Detail: Black_0.2mmMountainPass

Note: See Element: Black_0.2mmMountainPass in Annex H for detailed drawing instructions.


MGCP50K PDB150 R000276 Mountain Pass / all (point)


Named Location (ZD040)Point

Symbol Information


Symbol Graphic Name: PT_NamedLocation Symbol Graphic


ü

POINT LABEL ONLY


MGCP50K PZD040 R000285 Named Location / all (point)



DN: 09-048 17 November 2009Natural Pool (BH170)Point

Symbol Information


Symbol Graphic Name: PT_Cyan_NaturalPool_Perennial Symbol Graphic


ü

Element Type: Point - Shape Element Reference: P00026Element Name: Cyan_SpringPerennial

Description: A Cyan Spring (Perennial)


Detail: Cyan_SpringPerennial


Note: See Element: Cyan_SpringPerennial in Annex H for detailed drawing instructions.


MGCP50K PBH170 R000264 Natural Pool / perennial (point) HYP = 1


Symbol Information


Symbol Graphic Name: PT_Cyan_NaturalPool_Non-perennial Symbol Graphic


Element Type: Point - Shape Element Reference: P00032Element Name: Cyan_SpringNonPerennial

Description: A Cyan Spring (Non-perennial)


Detail: Cyan_SpringNonPerennial


Note: See Element: Cyan_SpringNonPerennial in Annex H for detailed drawing instructions.


MGCP50K PBH170 R000265 Natural Pool / intermittent, dry, or

unknown (point)

(HYP = 0 or HYP = 2 or HYP = 4)



DN: 09-048 17 November 2009Non-communication Tower (AL240)Point

Symbol Information


Symbol Graphic Name: PT_Black_Non-CommunicationTower Symbol Graphic


ü








MGCP50K PAL240 R000240 Non-Communication Tower /


(HGT < 46)


Symbol Information


Symbol Graphic Name: PT_Blue072_Non-CommunicationTower_VO Symbol Graphic








MGCP50K PAL240 R000241 Non-Communication Tower / single

obstruction (point)

(HGT >= 46)



DN: 09-048 17 November 2009Non-communication Tower (AL240) (continued)

Point

Symbol Information


Symbol Graphic Name: PT_Blue072_Non-CommunicationTower_MultipleVOs Symbol Graphic

Symbol Placement Instructions: Use this "multiple vertical obstruction" symbol rather than the Non-communication

Tower single vertical obstruction symbol in areas of congestion or overprinting as directed by product finishing guidance.

Origin: Centre of dot







MGCP50K PAL240 R000474 Non-communication Tower / multiple


*None


Oasis (EC020)Area

Symbol Information


Symbol Graphic Name: AR_Green362_Oasis Symbol Graphic


ü

Parameters:

Line Weight: 0.2mm

Description: Green362 0.2mm Solid Line (0.2mm wt)

Element Name: Green362_0.2mmSolidLine




MGCP50K AEC020 R000099 Oasis / all (area)





DN: 09-048 17 November 2009Offshore Platform (BD110)Point

Symbol Information


Symbol Graphic Name: PT_Black_OffshorePlatform Symbol Graphic


ü








MGCP50K PBD110 R000390 Offshore Platform / non-obstruction

(point)

(HGT < 46)


Symbol Information


Symbol Graphic Name: PT_Blue072_OffshorePlatform_VO Symbol Graphic








MGCP50K PBD110 R000391 Offshore Platform / single obstruction

(point)

(HGT >= 46)



DN: 09-048 17 November 2009Offshore Platform (BD110) (continued)

Point

Symbol Information


Symbol Graphic Name: PT_Blue072_OffshorePlatform_MultipleVOs Symbol Graphic

Symbol Placement Instructions: Use this "multiple vertical obstruction" symbol rather than the Offshore Platform single


of dot







MGCP50K PBD110 R000475 Offshore Platform / multiple


*None


Park (AK120)Area

Symbol Information


Symbol Graphic Name: AR_Black_Park Symbol Graphic


ü

Description: Black 02-65-25 Dash Line (0.2mm wt, 6.5mm dash, 2.5mm gap) with a Black Dot (0.25mm diameter) between dashes

Element Type: Line - Complex Element Reference: L00104Element Name: Black_Park-Outline

Parameters:



Repeating Point Interval: Centre dot in space between dashes

Colour Token: Black




Parameters:

Line weight: 0.2mm

Colour Token: Black



Colour Token: Black

Diameter: 0.25mm

Parameters:


MGCP50K AAK120 R000022 Park / all (area)





DN: 09-048 17 November 2009Particle Accelerator (AL140)Area

Symbol Information


Symbol Graphic Name: AR_Black_ParticleAccelerator Symbol Graphic


ü

Parameters:



Colour Token: Black

Note: Solid Fill


MGCP50K AAL140 R000392 Particle Accelerator / all (area)



DN: 09-048 17 November 2009Penstock (BH110)Line

Symbol Information


Symbol Graphic Name: LN_Cyan_Penstock_OnSurface Symbol Graphic


ü




Line Weight: 0.3mm


MGCP50K LBH110 R000178 Penstock / on surface, or unknown

(line)

(LOC = 0 or LOC = 44)


Symbol Information


Symbol Graphic Name: LN_Cyan_Penstock_BelowSurface Symbol Graphic





Line Weight: 0.3mm

Dash Length: 2.0mm

Dash Spacing: 0.5mm


MGCP50K LBH110 R000177 Penstock / below ground surface (line) LOC = 40



DN: 09-048 17 November 2009Penstock (BH110) (continued)

Line

Symbol Information


Symbol Graphic Name: LN_Cyan_Penstock_AboveSurface Symbol Graphic






Parameters:







Line Weight: 0.3mm









Colour Token: Cyan

Length: 0.7mm

Parameters:

Line weight: 0.3mm




MGCP50K LBH110 R000179 Penstock / above surface (line) LOC = 45


A - 165

DN: 09-048 17 November 2009Pipeline (AQ113)Line

Symbol Information


Symbol Graphic Name: LN_Black_Pipeline_NotWaterOnSurface Symbol Graphic


ü




Line Weight: 0.3mm


MGCP50K LAQ113 R000149 Pipeline / on waterbody bottom, on

surface, or unknown / not water (line)

(LOC=0 or LOC=17 or LOC=44) and PPO<>122


Symbol Information


Symbol Graphic Name: LN_Cyan_Pipeline_WaterOnSurface Symbol Graphic





Line Weight: 0.3mm


MGCP50K LAQ113 R000150 Pipeline / on waterbody bottom, on

surface, or unknown / water (line)

(LOC=0 or LOC=17 or LOC=44) and PPO=122


Symbol Information


Symbol Graphic Name: LN_Black_Pipeline_NotWaterBelowSurface Symbol Graphic


Element Name: Black_0.3mm-2.5mmLenDash-0.5mmGapLine Element Reference: L00037 Element Type: Line - Styled



Line Weight: 0.3mm

Dash Length: 2.5mm

Dash Spacing: 0.5mm


MGCP50K LAQ113 R000151 Pipeline / below waterbody bottom, or

below surface / not water (line)

(LOC=23 or LOC=40) and PPO<>122



DN: 09-048 17 November 2009Pipeline (AQ113) (continued)

Line

Symbol Information


Symbol Graphic Name: LN_Cyan_Pipeline_WaterBelowSurface Symbol Graphic


Element Name: Cyan_0.3mm-2.5mmLenDash-0.5mmGapLine Element Reference: L00044 Element Type: Line - Styled



Line Weight: 0.3mm

Dash Length: 2.5mm

Dash Spacing: 0.5mm


MGCP50K LAQ113 R000152 Pipeline / below waterbody bottom, or

below surface / water (line)

(LOC=23 or LOC=40) and PPO=122


Symbol Information


Symbol Graphic Name: LN_Black_Pipeline_NotWaterElevated Symbol Graphic


Element Name: Black_Pipeline (Other) Element Reference: L00068 Element Type: Line - Complex

Description: Black 0.3mm Solid Line with 'V' (0.2mm wt, 0.7mm long)

Fix at Start: Black_0.2mm-0.7mmLenV

Fix at End: Black_0.2mm-0.7mmLenV

Parameters:


Note: Origin: Apex of 'V' touches pipeline ends with "legs" of "V" facing away





Line Weight: 0.3mm


Description: Two Black 0.2mm linear segments each 0.7mm long which intersect at a 90 degree angle







Colour Token: Black

Length: 0.7mm

Parameters:

Line weight: 0.2mm




MGCP50K LAQ113 R000153 Pipeline / above surface, or above

waterbody bottom / not water (line)

(LOC=45 or LOC=46) and PPO<>122


A - 167

DN: 09-048 17 November 2009Pipeline (AQ113) (continued)

Line

Symbol Information


Symbol Graphic Name: LN_Cyan_Pipeline_WaterElevated Symbol Graphic


Element Name: Cyan_Pipeline (Water) Element Reference: L00069 Element Type: Line - Complex




Parameters:


Note: Origin: Apex of 'V' touches pipeline ends with "legs" of "V" facing away





Line Weight: 0.3mm


Description: Two Cyan 0.2mm linear segments each 0.7mm long which intersect at a 90 degree angle







Colour Token: Cyan

Length: 0.7mm

Parameters:

Line weight: 0.2mm




MGCP50K LAQ113 R000154 Pipeline / above surface, or above

waterbody bottom / water (line)

(LOC=45 or LOC=46) and PPO=122


A - 168

DN: 09-048 17 November 2009Power Line (AT030)Line

Symbol Information


Symbol Graphic Name: LN_Blue072_Powerline_Normal Symbol Graphic


ü

Description: Blue072 0.4mm Solid Line with Pylons

Element Type: Line - Complex Element Reference: L00070Element Name: Blue072_Powerline (Normal)

Parameters:

Line Style: Blue072_0.4mmSolidLine

Repeating Point: Blue072_Pylon



Note: The repeating point is also positioned at points of directional change. The symbol should remain up most.

Interval is 12.5mm

Element Reference: L00005 Element Type: Line - SimpleElement Name: Blue072_0.4mmSolidLine

Description: Blue072 0.4mm Solid Line (0.4mm wt)

Parameters:

Line weight: 0.4mm


Element Reference: P00020 Element Type: Point - ShapeElement Name: Blue072_Pylon

Description: A Blue072 pylon

Detail: Blue072_Pylon


Orientation: Centred at 90 degrees to the line

Note: See Element: Blue072_Pylon in Annex H for detailed drawing instructions.


MGCP50K LAT030 R000159 Power Line / normal, or unknown (line) TST = 0 or TST = 1



DN: 09-048 17 November 2009Power Line (AT030) (continued)

Line

Symbol Information


Symbol Graphic Name: LN_Blue072_Powerline_Caternary Symbol Graphic



Element Type: Line - Complex Element Reference: L00071Element Name: Blue072_Powerline (Catenary)

Parameters:

Line Style: Blue072_0.73mmSolidLine

Repeating Point: Blue072_Pylon



Note: The repeating point is also positioned at points of directional change. The symbol should remain up most.

Interval is 12.5mm

Element Reference: L00006 Element Type: Line - SimpleElement Name: Blue072_0.73mmSolidLine


Parameters:

Line weight: 0.73mm


Element Reference: P00020 Element Type: Point - ShapeElement Name: Blue072_Pylon





Note: See Element: Blue072_Pylon in Annex H for detailed drawing instructions.


MGCP50K LAT030 R000160 Power Line / mountain, or water

catenary (line)

TST = 2 or TST = 3


A - 170

DN: 09-048 17 November 2009Power Station (AD010)Area

Symbol Information


Symbol Graphic Name: AR_Black_PowerStation Symbol Graphic


ü

Parameters:

Line Weight: 0.2mm

Dash Length: 2.0mm

Dash Spacing: 0.5mm



Colour Token: Black



MGCP50K AAD010 R000015 Power Station / all (area)


Point

Symbol Information


Symbol Graphic Name: PT_Black_PowerStation Symbol Graphic


ü




Length: 1.2mm


MGCP50K PAD010 R000202 Power Station / non-obstruction (point) (HGT < 46)



DN: 09-048 17 November 2009Power Station (AD010) (continued)

Point

Symbol Information


Symbol Graphic Name: PT_Blue072_PowerStation_VO Symbol Graphic








MGCP50K PAD010 R000442 Power Station / single obstruction

(point)

(HGT >= 46)


A - 172

DN: 09-048 17 November 2009Power Substation (AD030)Area

Symbol Information


Symbol Graphic Name: AR_Black_PowerSubstation Symbol Graphic


ü

Parameters:

Line Weight: 0.2mm

Dash Length: 2.0mm

Dash Spacing: 0.5mm



Colour Token: Black



MGCP50K AAD030 R000016 Power Substation / all (area)


Point

Symbol Information


Symbol Graphic Name: PT_Black_PowerSubstation Symbol Graphic


ü




Length: 0.8mm


MGCP50K PAD030 R000342 Power Substation / all (point)



DN: 09-048 17 November 2009Processing Facility (AC000)Area

Symbol Information


Symbol Graphic Name: AR_Black_ProcessingFacility Symbol Graphic


ü

Parameters:

Line Weight: 0.2mm

Dash Length: 2.0mm

Dash Spacing: 0.5mm



Colour Token: Black



MGCP50K AAC000 R000013 Processing Facility / all (area)


Point

Symbol Information


Symbol Graphic Name: PT_Black_ProcessingFacility Symbol Graphic


ü




Length: 0.8mm


MGCP50K PAC000 R000201 Processing Facility / all (point)



DN: 09-048 17 November 2009Public Square (AL170)Area

Symbol Information


Symbol Graphic Name: AR_Black_PublicSquare Symbol Graphic


ü

Parameters:

Line Weight: 0.15mm



Colour Token: Black



MGCP50K AAL170 R000041 Public Square / all (area)



DN: 09-048 17 November 2009Pumping Station (AQ116)Area

Symbol Information


Symbol Graphic Name: AR_Black_PumpingStation Symbol Graphic


ü

Parameters:

Line Weight: 0.2mm

Dash Length: 2.0mm

Dash Spacing: 0.5mm



Colour Token: Black



MGCP50K AAQ116 R000049 Pumping Station / all (area)


Point

Symbol Information


Symbol Graphic Name: PT_Black_PumpingStation Symbol Graphic


ü




Length: 0.8mm


MGCP50K PAQ116 R000254 Pumping Station / all (point)



DN: 09-048 17 November 2009Quarry (AA012)Area

Symbol Information


Symbol Graphic Name: AR_Black_Quarry Symbol Graphic

Symbol Placement Instructions: The BlackPickAxeShovel sits inside area. The dashed line is placed around the

perimeter of the feature

ü

Colour Token: Black


Parameters:

Line Weight: 0.2mm

Dash Length: 2.0mm

Dash Spacing: 0.5mm




Element Name: Black_PickAxeShovel Element Reference: P00001 Element Type: Point - Shape





MGCP50K AAA012 R000008 Quarry / fully functional, or unknown

(area)

(FUN = 0 or FUN = 6)


Symbol Information


Symbol Graphic Name: AR_Black_Quarry_Abandoned Symbol Graphic

Symbol Placement Instructions: The BlackPickAxeShovel180 sits inside area. The dashed line is placed around the


Colour Token: Black


Parameters:

Line Weight: 0.2mm

Dash Length: 2.0mm

Dash Spacing: 0.5mm




Element Name: Black_PickAxeShovel180 Element Reference: P00002 Element Type: Point - Shape







MGCP50K AAA012 R000009 Quarry / abandoned (area) FUN = 2


Point


DN: 09-048 17 November 2009Quarry (AA012) (continued)

Point

Symbol Information


Symbol Graphic Name: PT_Black_Quarry_Operational Symbol Graphic


ü

Element Type: Point - Shape Element Reference: P00001Element Name: Black_PickAxeShovel






MGCP50K PAA012 R000194 Quarry / fully functional, or unknown

(point)

FUN = 0 or FUN = 6


Symbol Information


Symbol Graphic Name: PT_Black_Quarry_Abandoned Symbol Graphic


Element Type: Point - Shape Element Reference: P00002Element Name: Black_PickAxeShovel180








MGCP50K PAA012 R000195 Quarry / abandonded (point) FUN = 2



DN: 09-048 17 November 2009Racetrack (AK130)Line

Symbol Information


Symbol Graphic Name: LN_Black_Racetrack Symbol Graphic


ü




Line Weight: 0.5mm


MGCP50K LAK130 R000114 Racetrack / all (line)



DN: 09-048 17 November 2009Radar Station (AT045)Point

Symbol Information


Symbol Graphic Name: PT_Black_RadarStation Symbol Graphic

Symbol Placement Instructions: Origin: Centre of filled square

ü




Length: 0.5mm


MGCP50K PAT045 R000393 Radar Station / non-obstruction (point) (HGT < 46)


Symbol Information


Symbol Graphic Name: PT_Blue072_RadarStation_VO Symbol Graphic


ü







MGCP50K PAT045 R000409 Radar Station / single obstruction

(point)

(HGT >= 46)



DN: 09-048 17 November 2009Radar Station (AT045) (continued)

Point

Symbol Information


Symbol Graphic Name: PT_Blue072_RadarStation_MultipleVOs Symbol Graphic

Symbol Placement Instructions: Use this "multiple vertical obstruction" symbol rather than the Radar Station single


of dot







MGCP50K PAT045 R000476 Radar Station / multiple obstructions

(point)

*None


A - 181



DN: 09-048 17 November 2009Railway (AN010)Line

Symbol Information


Symbol Graphic Name: LN_Black_Railway_SingleNormalGauge_Non-Electric Symbol Graphic


ü

Description: Black 0.3mm Solid Line with Ticks (0.15mm wt, 1.5mm long, 6.4mm interval )

Element Type: Line - Complex Element Reference: L00093Element Name: Black_Railway (Single Normal Gauge, Non-Electric)

Parameters:



Repeating Point Interval: Initial offset: 3.2mm after that 6.4mm

Colour Token: Black

Note: Ticks are centred and 90 degrees to line

Element Reference: L00011 Element Type: Line - SimpleElement Name: Black_0.3mmSolidLine


Parameters:

Line weight: 0.3mm

Colour Token: Black



Colour Token: Black


Parameters:



MGCP50K LAN010 R000117 Railway / operational, standard,

non-electric (line)

(FUN=0 or FUN=6) and (RGC=0 or RGC=1 or

RGC=3) and (RRA=0 or RRA=4) and (LTN = 1)



DN: 09-048 17 November 2009Railway (AN010) (continued)

Line

Symbol Information


Symbol Graphic Name: LN_Black_Railway_DoubleNormalGauge_Non-Electric Symbol Graphic


Element Name: Black_Railway (Double Normal Gauge, Non-Electric) Element Reference: L00072 Element Type: Line - Complex

Description: Black 0.3mm Solid Line with Double Ticks (0.15mm wt, 1.5mm long, 6.4mm interval )




Repeating Point 2: Black_0.15mm-1.5mmLenTick


Repeating Point Interval 2: Initial offset: 3.7mm after that 6.9mm

Note: Ticks are centred and 90 degrees to line.

Element Name: Black_0.3mmSolidLine Element Type: Line - Simple Element Reference: L00011



Line weight: 0.3mm

Element Name: Black_0.15mm-1.5mmLenTick Element Type: Point - Simple Element Reference: P00044



Line weight: 0.15mm Length: 1.5mm Orientation: Centred 90 degrees to line

Element Name: Black_0.15mm-1.5mmLenTick Element Reference: P00044 Element Type: Point - Simple





MGCP50K LAN010 R000444 Railway / operational, double

standard, non-electric (line)


RGC=3) and (RRA=0 or RRA=4) and (LTN >= 2)


A - 183


Line

Symbol Information


Symbol Graphic Name: LN_Black_Railway_In_Road Symbol Graphic


Description: Black 0.15mm Solid Line with Black 0.15mm wt 1.5mm long tick repeating

Element Type: Line - Complex Element Reference: L00140Element Name: Black_RailwayInRoad

Parameters:




Colour Token: Black




Parameters:

Line weight: 0.15mm

Colour Token: Black



Colour Token: Black


Parameters:



MGCP50K LAN010 R000334 Railway / in road (line) (RIR = 1001)


A - 184


Line

Symbol Information


Symbol Graphic Name: LN_Black_Car-Line Symbol Graphic



Element Type: Line - Complex Element Reference: L00081Element Name: Black_Car-Line

Parameters:




Colour Token: Black

Note: Ticks are centred and 90 degrees to line. Tick length extends across road.



Parameters:

Line weight: 0.15mm

Colour Token: Black



Colour Token: Black


Parameters:



MGCP50K LAN010 R000118 Railway / carline, or funicular (line) RRC=2 or RRC = 15


Symbol Information


Symbol Graphic Name: LN_Black_Railway_Dismantled Symbol Graphic





Line Weight: 0.3mm

Dash Length: 2.0mm

Dash Spacing: 0.5mm


MGCP50K LAN010 R000335 Railway / dismantled (line) FUN = 4


A - 185


Line

Symbol Information


Symbol Graphic Name: LN_Black_Railway_SingleNormalGauge_Electric Symbol Graphic


Element Name: Black_Railway (Single Normal Gauge, Electric) Element Reference: L00088 Element Type: Line - Complex





Repeating Point 2: Black_0.5mmDotFilled



Repeating Point Interval 2: Initial offset: 2.95mm after that 12.8mm. Dots are placed on every other pair of

ticks on the north/west most side of the track.



Note: Ticks are centred 90 and degrees to line. Bottom of each dot is offset 0.75mm from the centre of the line

style line




Line weight: 0.3mm





Element Name: Black_0.5mmDotFilled Element Reference: P00049 Element Type: Point - Simple

Description: A Black filled circle with a 0.5mm diameter


Diameter: 0.5mm

Element Name: Black_0.5mmDotFilled Element Type: Point - Simple Element Reference: P00049



Diameter: 0.5mm


MGCP50K LAN010 R000119 Railway / operational, standard,

electric (line)


RGC=3) and (RRA=1 or RRA=3) and (LTN = 1)


A - 186


Line

Symbol Information


Symbol Graphic Name: LN_Black_Railway_DoubleNormalGauge_Electric Symbol Graphic


Element Name: Black_Railway (Double Normal Gauge, Electric) Element Reference: L00074 Element Type: Line - Complex

Description: Black 0.3mm Solid Line with Double Ticks (0.15mm wt, 1.5mm long, 6.4mm interval ) and 0.5mm Dots








Repeating Point Interval 2: Initial offset 3.7mm after that 6.9mm





Note: Ticks are centred and 90 degrees to line. Bottom of each dot is offset 0.75mm from the centre of the line

style line.




Line weight: 0.3mm












Diameter: 0.5mm




Diameter: 0.5mm


MGCP50K LAN010 R000445 Railway / operational, double

standard, electric (line)


RGC=3) and (RRA=1 or RRA=3) and (LTN >= 2)


A - 187


Line

Symbol Information


Symbol Graphic Name: LN_Black_Railway_SingleNarrowGauge_Electric Symbol Graphic


Element Name: Black_Railway (Single Narrow Gauge, Electric) Element Reference: L00075 Element Type: Line - Complex

Description: Black 0.3mm Solid Line with Ticks (0.15mm wt, 0.75mm long, 6.4mm interval ) and 0.5mm Dots







Repeating Point Interval 2: Initial offset: 2.95mm after that 12.8mm. Dots are placed on every tick on the

north/west most side of the track since ticks alternate sides

Repeating Point Interval 3: Initial offset: 3.45mm after that 12.8mm. Dots are placed on every tick on the

north/west most side of the track since ticks alternate sides.

Note: Ticks are 90 degrees to line and alternate on either side of the line. Bottom of each dot is offset 0.75mm

from the centre of the line style line




Line weight: 0.3mm








Diameter: 0.5mm




Diameter: 0.5mm


MGCP50K LAN010 R000120 Railway / operational, narrow, electric

(line)

(FUN=0 or FUN=6) and (RGC=2) and (RRA=1 or

RRA=3) and (LTN = 1)


A - 188


Line

Symbol Information


Symbol Graphic Name: LN_Black_Railway_DoubleNarrowGauge_Electric Symbol Graphic


Element Name: Black_Railway (Double Narrow Gauge, Electric) Element Reference: L00076 Element Type: Line - Complex










Repeating Point Interval 3: Initial offset: 3.05mm after that 13.8mm. Dots are placed on every pair of ticks on

the north/west most side of the track since ticks alternate sides.


the north/west most side of the track since ticks alternate sides.






Line weight: 0.3mm












Diameter: 0.5mm




Diameter: 0.5mm


MGCP50K LAN010 R000446 Railway / operational, double narrow,

electric (line)


RRA=3) and (LTN >= 2)


A - 189


Line

Symbol Information


Symbol Graphic Name: LN_Black_Railway_SingleNormalGauge_Non-Electric_NotInUse Symbol Graphic


Description: Black 0.3mm Dash Line (0.3mm wt, 5.9mm dash, 0.5mm gap) with Ticks (0.15mm wt, 1.5mm long, 6.4mm interval )

Element Type: Line - Complex Element Reference: L00078Element Name: Black_Railway (Single Normal Gauge, Non-Electric, not in use)

Parameters:




Colour Token: Black

Note: Tick is centred in dash and 90 degrees to line.




Parameters:

Line weight: 0.3mm

Colour Token: Black



Colour Token: Black


Parameters:



MGCP50K LAN010 R000121 Railway / non-operational, standard,

non-electric (line)

(FUN=1 or FUN=2 or FUN=3) and (RGC=0 or RGC=1

or RGC=3) and (RRA=0 or RRA=4) and (LTN = 1)


A - 190


Line

Symbol Information


Symbol Graphic Name: LN_Black_Railway_DoubleNormalGauge_Non-Electric_NotInUse Symbol Graphic


Element Name: Black_Railway (Double Normal Gauge, Non-Electric, not in

use)

Element Reference: L00077 Element Type: Line - Complex

Description: Black 0.3mm Dash Line (0.3mm wt, 5.9mm dash, 0.5mm gap) with Double Ticks (0.15mm wt, 1.5mm long, 6.4mm interval )







Note: Tick pair is centred in dash and 90 degrees to line. There is a 0.5mm gap between each tick in the tick

pair.

Element Name: Black_0.3mm-5.9mmLenDash-0.5mmGapLine Element Type: Line - Styled Element Reference: L00039













MGCP50K LAN010 R000447 Railway / non-operational, double

standard, non-electric (line)


or RGC=3) and (RRA=0 or RRA=4) and (LTN >= 2)


A - 191


Line

Symbol Information


Symbol Graphic Name: LN_Black_Railway_SingleNarrowGauge_Non-Electric_NotInUse Symbol Graphic



Element Type: Line - Complex Element Reference: L00079Element Name: Black_Railway (Single Narrow Gauge, Non-Electric, not in use)

Parameters:




Colour Token: Black

Note: Ticks are based 90 degrees to line and alternate on either side of the line. Tick is centred along dash.




Parameters:

Line weight: 0.3mm

Colour Token: Black



Colour Token: Black


Parameters:



MGCP50K LAN010 R000122 Railway / non-operational, narrow,

non-electric (line)

(FUN=1 or FUN=2 or FUN=3) and (RGC=2) and

(RRA=0 or RRA=4) and (LTN = 1)


A - 192


Line

Symbol Information


Symbol Graphic Name: LN_Black_Railway_DoubleNarrowGauge_Non-Electric_NotInUse Symbol Graphic


Element Name: Black_Railway (Double Narrow Gauge, Non-Electric, not in

use)

Element Reference: L00080 Element Type: Line - Complex








Note: Tick pair is centred in dash and 90 degrees to line. Tick pairs alternate on either side of the line.















narrow, non-electric (line)


(RRA=0 or RRA=4) and (LTN >= 2)


A - 193


Line

Symbol Information


Symbol Graphic Name: LN_Black_Railway_SingleNormalGauge_Electric_NotInUse Symbol Graphic


Element Name: Black_Railway (Single Normal Gauge, Electric, not in use) Element Reference: L00085 Element Type: Line - Complex

Description: Black 0.3mm Dash Line (0.3mm wt, 5.9mm dash, 0.5mm gap) with Ticks (0.15mm wt, 0.75mm long, 6.4mm interval ) and 0.5mm Dots







Repeating Point Interval 2: Initial offset: 2.7mm after that 6.4mm. Dots are placed on every other tick on the

north/west most side of the track



Note: Tick is centred in dash and 90 degrees to line. Bottom of each dot is offset 0.75mm from the centre of the

line style line












Diameter: 0.5mm




Diameter: 0.5mm


MGCP50K LAN010 R000123 Railway / non-operational, standard,

electric (line)


or RGC=3) and (RRA=1 or RRA=3) and (LTN = 1)


A - 194


Line

Symbol Information


Symbol Graphic Name: LN_Black_Railway_DoubleNormalGauge_Electric_NotInUse Symbol Graphic


Element Name: Black_Railway (Double Normal Gauge, Electric, not in use) Element Reference: L00086 Element Type: Line - Complex

Description: Black 0.3mm Dash Line (0.3mm wt, 5.9mm dash, 0.5mm gap) with Double Ticks (0.15mm wt, 0.75mm long, 6.4mm interval ) and 0.5mm

Dots













Note: Tick pair is centred in dash and 90 degrees to line. Bottom of each dot is offset 0.75mm from the centre

of the line style line
















Diameter: 0.5mm




Diameter: 0.5mm



standard, electric (line)


or RGC=3) and (RRA=1 or RRA=3) and (LTN >= 2)


A - 195


Line

Symbol Information


Symbol Graphic Name: LN_Black_Railway_SingleNarrowGauge_Electric_NotInUse Symbol Graphic


Element Name: Black_Railway (Single Narrow Gauge, Electric, not in use) Element Reference: L00083 Element Type: Line - Complex












Note: Ticks are 90 degrees to line and alternate on either side of the line. Bottom of each dot is 0.75mm from

the centre of the line style line












Diameter: 0.5mm




Diameter: 0.5mm


MGCP50K LAN010 R000124 Railway / non-operational, narrow,

electric (line)


(RRA=1 or RRA=3) and (LTN = 1)


A - 196


Line

Symbol Information


Symbol Graphic Name: LN_Black_Railway_DoubleNarrowGauge_Electric_NotInUse Symbol Graphic


Element Name: Black_Railway (Double Narrow Gauge, Electric, not in use) Element Reference: L00084 Element Type: Line - Complex

Description: Black 0.3mm Dash Line (0.3mm wt, 5.9mm dash, 0.5mm gap) with Double Ticks (0.15mm wt, 0.75mm long, 6.4mm interval ) and 0.5mm

Dots










the north/west most side of the track since ticks alternate sides


the north/west most side of the track since ticks alternate sides


















Diameter: 0.5mm




Diameter: 0.5mm



narrow, electric (line)


(RRA=1 or RRA=3) and (LTN >= 2)


A - 197


Line

Symbol Information


Symbol Graphic Name: LN_Black_Railway_SingleNarrowGauge_Non-Electric Symbol Graphic



Element Type: Line - Complex Element Reference: L00087Element Name: Black_Railway (Single Narrow Gauge, Non-Electric)

Parameters:




Colour Token: Black

Note: Ticks are 90 degrees to line and alternate on either side of the line.



Parameters:

Line weight: 0.3mm

Colour Token: Black



Colour Token: Black


Parameters:



MGCP50K LAN010 R000125 Railway / operational, narrow,

non-electric (line)


RRA=4) and (LTN = 1)


A - 198


Line

Symbol Information


Symbol Graphic Name: LN_Black_Railway_DoubleNarrowGauge_Non-Electric Symbol Graphic


Element Name: Black_Railway (Double Narrow Gauge, Non-Electric) Element Reference: L00073 Element Type: Line - Complex








Note: Ticks are 90 degrees to line and tick pairs alternate on either side of the line.




Line weight: 0.3mm










MGCP50K LAN010 R000451 Railway / operational, double narrow,

non-electric (line)


RRA=4) and (LTN >= 2)


A - 199

DN: 09-048 17 November 2009Railway Sidetrack (AN050)Line

Symbol Information


Symbol Graphic Name: LN_Black_RailwaySidetrack_StandardNonElectric Symbol Graphic


ü


Element Type: Line - Complex Element Reference: L00141Element Name: Black_RailwaySide-StandardNonElectric

Parameters:




Colour Token: Black




Parameters:

Line weight: 0.15mm

Colour Token: Black



Colour Token: Black


Parameters:



MGCP50K LAN050 R000336 Railway Siding-Spur / standard /

non-electric (line)

(RGC = 0 or RGC = 1 or RGC = 3) and (RRA = 0 or

RRA = 4)



DN: 09-048 17 November 2009Railway Sidetrack (AN050) (continued)

Line

Symbol Information


Symbol Graphic Name: LN_Black_RailwaySidetrack_SingleNarrowGauge_Electric Symbol Graphic


Element Name: Black_RailwaySpur (Single Narrow Gauge, Electric) Element Reference: L00090 Element Type: Line - Complex







Repeating Point Interval 2: Space between one set of 2 dots is 0.5mm; Dots centred on every other pair of

ticks on the north/west most side of the track

Note: Tick is based 90 degrees to line and set alternate on either side of the line. Bottom of Dot is 0.75mm from

the centre of the line




Line weight: 0.15mm








Diameter: 0.5mm


MGCP50K LAN050 R000128 Railway Siding-Spur / narrow / electric

(line)

(RGC=2) and (RRA=1 or RRA=3)


A - 201


Line

Symbol Information


Symbol Graphic Name: LN_Black_RailwaySidetrack_SingleNarrowGauge_Non-Electric Symbol Graphic



Element Type: Line - Complex Element Reference: L00091Element Name: Black_RailwaySpur (Single Narrow Gauge, Non-Electric)

Parameters:




Colour Token: Black

Note: Tick is based 90 degrees to line and set alternate on either side of the line.



Parameters:

Line weight: 0.15mm

Colour Token: Black



Colour Token: Black


Parameters:



MGCP50K LAN050 R000127 Railway Siding-Spur / narrow /

non-electric (line)

(RGC=2) and (RRA=0 or RRA=4)


A - 202


Line

Symbol Information


Symbol Graphic Name: LN_Black_RailwaySidetrack_SingleNormalGauge_Electric Symbol Graphic


Element Name: Black_RailwaySpur (Single Normal Gauge, Electric) Element Reference: L00092 Element Type: Line - Complex







Repeating Point Interval 2: Space between one set of 2 dots is 0.5mm; Dots are centred on every other pair of

ticks on the north/west most side of the track

Note: Tick is centred and 90 degrees to line. Bottom of Dot is 0.75mm from the centre of the line




Line weight: 0.15mm








Diameter: 0.5mm


MGCP50K LAN050 R000129 Railway Siding-Spur / standard /

electric (line)

(RGC=0 or RGC=1 or RGC=3) and (RRA=1 or

RRA=3) and (RSA=0 or RSA=1)


A - 203

DN: 09-048 17 November 2009Railway Turntable (AN075)Point

Symbol Information


Symbol Graphic Name: PT_Black_RailwayTurntable Symbol Graphic


ü

Element Type: Point - Simple Element Reference: P00034Element Name: Black_0.1mmOpenCirclewithLine

Description: A Black open circle with line (Line weight is 0.1 mm)


Diameter: 1.5mm

Line Weight: 0.1mm

Note: Interior Line crosses through centre of circle: Line wt of line: 0.1mm Length of line: 1.5mm Orientation of

line: at 45 degrees to South neatline


MGCP50K PAN075 R000250 Railway Turntable / all (point)


Railway Yard (AN060)Area

Symbol Information


Symbol Graphic Name: AR_Black_RailwayYard Symbol Graphic

Symbol Placement Instructions: Interior Line (track): Separation: 0.4mm; Orientation shall be parallel to the longest

axis of the feature. The linestyle is placed around the perimeter of the feature and applied to interior lines following the

spacing/separation already mentioned.

ü

Description: Black 02 Solid Line with Black 015-1 Ticks (0.15mm wt, 1.0mm long, 6.4mm interval) as a perimeter, with the same symbol running through

the area spaced 0.4mm

Element Type: Line - Complex Element Reference: L00103Element Name: Black_Railway-Yard

Parameters:


Repeating Point: Black_0.15mm-1mmLenTick


Colour Token: Black

Note: Tick is centred and 90 degrees to line



Parameters:

Line weight: 0.2mm

Colour Token: Black

Element Reference: P00043 Element Type: Point - SimpleElement Name: Black_0.15mm-1mmLenTick


Colour Token: Black


Parameters:



MGCP50K AAN060 R000048 Railway Yard / all (area)



DN: 09-048 17 November 2009Rapids (BH120)Area

Symbol Information


Symbol Graphic Name: AR_Cyan_Rapids Symbol Graphic


ü

Parameters:

Line Weight: 0.4mm



Colour Token: Cyan



MGCP50K ABH120 R000064 Rapids / all (area)


Line

Symbol Information


Symbol Graphic Name: LN_Cyan_Rapids Symbol Graphic


ü




Line Weight: 0.2mm


MGCP50K LBH120 R000180 Rapids / all (line)


Point


DN: 09-048 17 November 2009Rapids (BH120) (continued)

Point

Symbol Information


Symbol Graphic Name: PT_Cyan_Rapids Symbol Graphic

Symbol Placement Instructions: Symbol used only with a line drain and is placed perpendicular to drain. Origin: Centre

of line

ü

Element Type: Point - Simple Element Reference: P00060Element Name: Cyan_0.2mm-1.3mmLenLine

Description: A Cyan 0.2mm lineweight line that is 1.3mm long.





MGCP50K PBH120 R000261 Rapids / all (point)



DN: 09-048 17 November 2009Recreational Pier (AK190)Area

Symbol Information


Symbol Graphic Name: AR_Black_RecreationalPier Symbol Graphic

Symbol Placement Instructions: The solid line is placed around the perimeter of the area feature.

ü

Parameters:

Line Weight: 0.2mm



Colour Token: Black



MGCP50K AAK190 R000394 Recreational Pier / all (area)


Line

Symbol Information


Symbol Graphic Name: LN_Black_RecreationalPier Symbol Graphic


ü




Line Weight: 0.2mm


MGCP50K LAK190 R000395 Recreational Pier /all (line)



DN: 09-048 17 November 2009Recycling Site (AB010)Area

Symbol Information


Symbol Graphic Name: AR_Black_RecyclingSite Symbol Graphic


ü

Parameters:

Line Weight: 0.2mm

Dash Length: 2.0mm

Dash Spacing: 0.5mm



Colour Token: Black



MGCP50K AAB010 R000012 Recycling Site / all (area)



DN: 09-048 17 November 2009Reservoir (BH130)Area

Symbol Information


Symbol Graphic Name: AR_Cyan_Reservoir Symbol Graphic


ü




Parameters:





Line Weight: 0.1mm


MGCP50K ABH130 R000067 Reservoir / fully functional, or unknown

(area)

(FUN = 6 or FUN=0)


Symbol Information


Symbol Graphic Name: AR_Cyan_Reservoir_UnderConstruction Symbol Graphic


Colour Token: Cyan



Parameters:







Line Weight: 0.1mm

Dash Length: 2.0mm

Dash Spacing: 0.5mm


MGCP50K ABH130 R000066 Reservoir / under construction (area) FUN = 1



DN: 09-048 17 November 2009Rice Field (BH135)Area

Symbol Information


Symbol Graphic Name: AR_Cyan_Rice_Terraced Symbol Graphic


Colour Token: Cyan

Element Name: Cyan_RiceFill Element Reference: A00019 Element Type: Area - Pattern

Description: Cyan Rice Fill

Parameters:

Area Pattern: See Element: Cyan_RiceFill in Annex I





Line Weight: 0.2mm

Dash Length: 2.0mm

Dash Spacing: 0.5mm


MGCP50K ABH135 R000068 Rice Field / terraced (area) FFP = 3


Symbol Information


Symbol Graphic Name: AR_Cyan_Rice Symbol Graphic


ü

Parameters:


Element Type: Area - Pattern Element Reference: A00019Element Name: Cyan_RiceFill

Colour Token: Cyan

Area Pattern: See Element: Cyan_RiceFill in Annex I



MGCP50K ABH135 R000069 Rice Field / non-terraced (area) FFP <> 3



DN: 09-048 17 November 2009Rig (AA040)Point

Symbol Information


Symbol Graphic Name: PT_Black_Rig Symbol Graphic


ü








MGCP50K PAA040 R000196 Rig / non-obstruction (point) (HGT < 46) and SRL <> 1


Symbol Information


Symbol Graphic Name: PT_Blue072_Rig_VO Symbol Graphic








MGCP50K PAA040 R000197 Rig / single obstruction (point) (HGT >= 46) or SRL = 1



DN: 09-048 17 November 2009Rig (AA040) (continued)

Point

Symbol Information


Symbol Graphic Name: PT_Blue072_Rig_MultipleVOs Symbol Graphic

Symbol Placement Instructions: Use this "multiple vertical obstruction" symbol rather than the Rig single vertical








MGCP50K PAA040 R000477 Rig / multiple obstructions (point) *None


A - 212



DN: 09-048 17 November 2009River (BH140)Area

Symbol Information


Symbol Graphic Name: AR_Cyan_River_Perennial Symbol Graphic


ü




Parameters:





Line Weight: 0.2mm


MGCP50K ABH140 R000070 River / perennial (area) HYP=1


Symbol Information


Symbol Graphic Name: AR_Cyan_River_Non-perennial Symbol Graphic


Colour Token: Cyan



Parameters:






Line Weight: 0.2mm

Dash Length: 2.0mm

Dash Spacing: 0.5mm


MGCP50K ABH140 R000071 River / non-perennial (area) HYP <> 1


Line


DN: 09-048 17 November 2009River (BH140) (continued)

Line

Symbol Information


Symbol Graphic Name: LN_Cyan_River_Perennial Symbol Graphic


ü




Line Weight: 0.2mm


MGCP50K LBH140 R000181 River / perennial (line) HYP = 1


Symbol Information


Symbol Graphic Name: LN_Cyan_River_Non-perennial Symbol Graphic





Line Weight: 0.2mm

Dash Length: 2.0mm

Dash Spacing: 0.5mm


MGCP50K LBH140 R000182 River / non-perennial (line) HYP <> 1



DN: 09-048 17 November 2009Road (AP030)Line

Symbol Information


Symbol Graphic Name: LN_Road_FairWeather_Unpaved_Operational Symbol Graphic


ü

Element Name: Road_Fair_Loose_Operational_ClassUnknown Element Reference: L00167 Element Type: Line - Complex

Description: Black 0.6mm Solid Line and PaperWhite 0.3mm Solid line. The Black 0.6mm Solid Line is placed beneath the PaperWhite 0.3mm line.

Both lines are centred on the linear geometry.



Line Style 2: PaperWhite_0.3mmSolidLine

Note: Both lines are centred on the linear geometry with the Black 0.6mm Solid Line beneath the

PaperWhite 0.3mm Solid line to form the casing.




Line Weight: 0.6mm

Element Name: PaperWhite_0.3mmSolidLine Element Reference: L00166 Element Type: Line - Simple

Description: PaperWhite 0.3mm Solid Line (0.3mm wt)

Colour Token: PaperWhite Parameters:

Line Weight: 0.3mm


MGCP50K LAP030 R000138 Road / fairweather (line) WTC = 2



DN: 09-048 17 November 2009Road (AP030) (continued)

Line

Symbol Information


Symbol Graphic Name: LN_Road_AllWeather_HardSurface_Operational_NoMedian_1Lane Symbol Graphic


Element Name: Road_HardSurface_Operational_Single_NoMedian Element Reference: L00154 Element Type: Line - Complex

Description: Black 0.6mm Solid Line (0.6mm wt) and Dk-Brown1815 0.3mm Solid Line (0.3mm wt)




Note: The Black_0.6mmSolidLine line and the Dk-Brown1815_0.3mmSolidLine are centred on the linear

feature. The Black line is placed beneath the Dk-Brown1815_0.3mmSolidLine to form the cased

line.




Line Weight: 0.6mm




Line Weight: 0.3mm


MGCP50K LAP030 R000132 Road / fully functional / no median /

single lane / paved / all weather (line)

(FUN=6) and (MES=1000) and (LTN<2) and (RST=1)

and (WTC=1)


A - 216


Line

Symbol Information


Symbol Graphic Name: LN_Road_AllWeather_HardSurface_Operational_NoMedian_MultipleLanes Symbol Graphic


Element Name: Road_HardSurface_Operational_Dual_NoMedian Element Reference: L00157 Element Type: Line - Complex





Note: The Black_0.8mmSolidLine line and the Dk-Brown1815_0.5mmSolidLine are centred on the linear

feature. The Black line is placed beneath the Dk-Brown1815_0.5mmSolidLine to form the cased

line.




Line Weight: 0.8mm




Line Weight: 0.5mm


MGCP50K LAP030 R000133 Road / fully functional / no median / 2

or more lanes / paved / all weather

(line)

(FUN=6) and (MES=1000) and (LTN>=2) and

(RST=1) and (WTC=1)


A - 217


Line

Symbol Information


Symbol Graphic Name: LN_Road_AllWeather_HardSurface_Operational_Median_MultipleLanes Symbol Graphic

Symbol Placement Instructions: Median aligns centrally within Road. Road: Black 1.0mm Solid Line (at bottom) Fill:

Dk-Brown1815 0.6mm Solid Line and Median: Black 0.1mm Solid Line (at top)

Element Name: Road_HardSurface_Operational_Median_MultipleLanes Element Reference: L00160 Element Type: Line - Complex

Description: Black 1.0mm Solid Line (1.0mm wt), Black 0.1mm Solid Line (0.1mm wt) and Dk-Brown1815 0.6mm Solid Line (0.6mm wt)





Note: The Black_1.0mmSolidLine line, the Dk-Brown1815_0.6mmSolidLine, and the

Black_0.1mmSolidLine are centred on the linear feature. The Black 1.0mm line is placed at the

bottom and the Dk-Brown1815_0.6mmSolidLine is placed beneath the 0.1mm Black line.




Line Weight: 1.0mm




Line Weight: 0.6mm




Line Weight: 0.1mm


MGCP50K LAP030 R000338 Road / fully functional / median / 2 or

more lanes / paved / all weather (line)


(RST=1) and (WTC=1)


A - 218


Line

Symbol Information


Symbol Graphic Name: LN_Road_AllWeather_Loose_Operational_NoMedian_1Lane Symbol Graphic

Symbol Placement Instructions: The 3 lines are centred on the linear geometry. The Black 0.6mm Solid line is placed

on the bottom, the PaperWhite 0.3mm Solid line is placed in the middle and the Dk-Brown1815 0.3 3mm Dash/1.5mm

Gap line is placed on top.

Element Name: Road_LooseSurface_Operational_NoMedian_1Lane Element Reference: L00161 Element Type: Line - Complex

Description: Black 0.6mm Solid Line (0.6mm wt), White 0.3mm Solid Line (0.3mm wt) and Dk-Brown1815 0.3mm 3.0mm Dash/1.5 Gap dashed line




Line Style 3: Dk-Brown1815_0.3mm-3mmLenDash-1.5mmGapLine

Note: The 3 lines are centred on the linear geometry. The Black 0.6mm Solid line is placed on the

bottom, the PaperWhite 0.3mm Solid line is placed in the middle and the Dk-Brown1815 0.3 3mm

Dash/1.5mm Gap line is placed on top.




Line Weight: 0.6mm




Line Weight: 0.3mm

Element Reference: L00191 Element Type: Line - StyledElement Name: Dk-Brown1815_0.3mm-3mmLenDash-1.5mmGapLine





MGCP50K LAP030 R000135 Road / fully functional / no median /

single lane / unpaved / all weather

(line)


and (WTC=1)


A - 219


Line

Symbol Information


Symbol Graphic Name: LN_Road_AllWeather_Loose_Operational_NoMedian_MultipleLanes Symbol Graphic

Symbol Placement Instructions: The 3 lines are centred on the linear geometry. The Black 0.8mm Solid line is placed

on the bottom, the PaperWhite 0.5mm Solid line is placed in the middle and the Dk-Brown1815 0.5 3mm Dash/1.5mm

Gap line is placed on top.

Element Name: Road_LooseSurface_Operational_NoMedian_MultipleLanes Element Reference: L00162 Element Type: Line - Complex

Description: Black 0.8mm Solid Line (0.8mm wt) with alternating repeating points Dk-Brown1815_0.5mm-3.0mm_Line and

PaperWhite_0.5mm-1.5mm_Line




Line Style 3: Dk-Brown1815_0.5mm-3mmLenDash-1.5mmGapLine

Note: The 3 lines are centred on the linear geometry. The Black 0.8mm Solid line is placed on the

bottom, the PaperWhite 0.5mm Solid line is placed in the middle and the Dk-Brown1815 0.5 3mm

Dash/1.5mm Gap line is placed on top.




Line Weight: 0.8mm


Description: PaperWhite 0.5mm Solie Line (0.5mm wt)


Line Weight: 0.5mm

Element Reference: L00192 Element Type: Line - StyledElement Name: Dk-Brown1815_0.5mm-3mmLenDash-1.5mmGapLine





MGCP50K LAP030 R000136 Road / fully functional / no median / 2

or more lanes / unpaved / all weather

(line)


(RST=2) and (WTC=1)


A - 220


Line

Symbol Information


Symbol Graphic Name: LN_Road_AllWeather_HardSurface_Construction_NoMedian_1Lane Symbol Graphic

Symbol Placement Instructions: The linear symbology is applied to the geometry of the feature. The PaperWhite solid

line is placed on the "bottom" with the Black dashed line in the middle and the Dk-Brown1815 dashed line on top.

Element Name: Road_HardSurface_Construction_NoMedian_1Lane Element Reference: L00165 Element Type: Line - Complex

Description: PaperWhite 0.6mm Solid Line and Black_0.6mm-2.5mmLenDash-0.5mmGapLine and

Dk-Brown1815_0.3mm-2.5mmLenDash-0.5mmGapLine


Line Style: PaperWhite_0.6mmSolidLine

Line Style 2: Black_0.6mm-2.5mmLenDash-0.5mmGapLine

Line Style 3: Dk-Brown1815_0.3mm-2.5mmLenDash-0.5mmGapLine

Note: The PaperWhite 0.6mm solid line is placed beneath the Black_0.6mm-2.5mmLenDash-

0.5mmGapLine line and it is placed beneath the Dk-Brown1815_0.3mm-2.5mmLenDash-

0.5mmGapLine line. The gaps are coincident between the two dashed lines.




Line Weight: 0.6mm


Description: Black 0.6mm Dashed Line ( 0.6mm wt, 2.5mm Dash Length, 0.5mm Dash Gap)



Element Reference: L00164 Element Type: Line - StyledElement Name: Dk-Brown1815_0.3mm-2.5mmLenDash-0.5mmGapLine





MGCP50K LAP030 R000137 Road / under construction / no median

/ single lane / paved / all weather (line)


and (WTC=1)


A - 221


Line

Symbol Information


Symbol Graphic Name: LN_Road_AllWeather_HardSurface_Construction_NoMedian_MultipleLanes Symbol Graphic

Symbol Placement Instructions: The linear symbology is applied to the geometry of the feature. The PaperWhite solid

line is placed on the "bottom" with the Black dashed line in the middle and the Dk-Brown1815 dashed line on top.

Element Name: Road_HardSurface_Construction_NoMedian_MultipleLanes Element Reference: L00174 Element Type: Line - Complex

Description: PaperWhite 0.8mm Solid Line and Black_0.8mm-2.5mmLenDash-0.5mmGapLine and




Line Style 2: Black_0.8-2.5mmLenDash-0.5mmGap-0.5mmGapLine


Note: The PaperWhite 0.8mm solid line is placed beneath the Black_0.8mm-2.5mmLenDash-

0.5mmGapLine line and it is placed beneath the Dk-Brown1815_0.5mm-2.5mmLenDash-

0.5mmGapLine line. The gaps are coincident between the two lines.




Line Weight: 0.8mm

Element Name: Black_0.8-2.5mmLenDash-0.5mmGap-0.5mmGapLine Element Reference: L00172 Element Type: Line - Styled










/ 2 or more lanes / paved / all weather

(line)


(RST=1) and (WTC=1)


A - 222


Line

Symbol Information


Symbol Graphic Name: LN_Road_AllWeather_HardSurface_Construction_Median_MultipleLanes Symbol Graphic

Symbol Placement Instructions: The 4 lines are centred on the geometry and the gaps are coincident. Bottom line:

PaperWhite 1.0mm, Bottom Mid: Black 1.0mm dashed line, Top Mid: Dk-Brown1815 0.6mm dashed line, and Top: Black

0.1mm dashed line.

Element Name: Road_HardSurface_Construction_Median_MultipleLanes Element Reference: L00171 Element Type: Line - Complex

Description: PaperWhite 1.0 solid line, Black_1.0 dashed line, Dk-Brown1815_0.6mm dashed line, and Black_0.1mm dashed line. The 4 lines are all

centred on the line. Bot: PaperWhite line, Mid Bot: Black 1.0 line, Mid Top: Dk-Brown1815 line, Top: Black_0.1 line.





Line Style 4: Black_0.1mm-2.5mmLenDash-0.5mmGap-0.5mmGapLine

Note: The 4 lines are centred on the linear geometry. The gaps are coincident. Display Level:

Bottom:PaperWhite 1.0mm Bottom Mid:Black_1.0mm-2.5mmLenDash-0.5mm, Top

Mid:Dk-Brown1815_0.6mm-2.5mmLenDash-0.5mmGapLine Top: Black_0.1mm-2.5mmLenDash-

0.5mmGapLine.




Line Weight: 1.0mm









Element Reference: L00170


Element Type: Line - StyledElement Name: Black_0.1mm-2.5mmLenDash-0.5mmGap-0.5mmGapLine




MGCP50K LAP030 R000139 Road / under construction / median / 2

or more lanes / paved / all weather

(line)


(RST=1) and (WTC=1)


A - 223


Line

Symbol Information


Symbol Graphic Name: LN_Road_AllWeather_LooseSurface_Construction_NoMedian_1Lane Symbol Graphic

Symbol Placement Instructions: The 4 lines are centred on the linear geometry. Display Level: Bottom:PaperWhite

0.6mm Bottom Mid:Black_0.6mm-3.0mmLenDash-1.5mm, Top Mid:PaperWhite 0.3mm Top: Dk-Brown1815_0.3mm-3-3-

1.5-1.5-1.5-3mm Dashed line

Element Name: Road_LooseSurface_Construction_NoMedian_1Lane Element Reference: L00189 Element Type: Line - Complex

Description: This line is a combination of 4 lines which are centred on the linear geometry. Display Level: Bottom:PaperWhite 0.6mm Bottom

Mid:Black_0.6mm-3.0mmLenDash-1.5mm, Top Mid:PaperWhite 0.3mm Top: Dk-Brown1815_0.3mm-3-3-1.5-1.5-1.5-3mm Dashed line





Line Style 4: Dk-Brown1815_0.3mm-3-3-1.5-1.5-1.5-3DashLine

Note: The 4 lines are centred on the linear geometry. Display Level: Bottom:PaperWhite 0.6mm Bottom

Mid:Black_0.6mm-3.0mmLenDash-1.5mm, Top Mid:PaperWhite 0.3mm Top:

Dk-Brown1815_0.3mm-3-3-1.5-1.5-1.5-3mm Dashed line




Line Weight: 0.6mm





Element Reference: L00166 Element Type: Line - SimpleElement Name: PaperWhite_0.3mmSolidLine



Line Weight: 0.3mm


Description: Dk-Brown1815 0.3mm Dashed line (0.3mm wt; Dash1: 3.0mm Gap1: 3.0mm; Dash2: 1.5mm Gap2: 1.5mm; Dash3: 1.5mm Gap3: 3.0mm)

Element Type: Line - StyledElement Name: Dk-Brown1815_0.3mm-3-3-1.5-1.5-1.5-3DashLine


Line Weight: 0.3m Dash Length: 3.0mm Dash Spacing: 3.0mm





/ single lane / unpaved / all weather

(line)


and (WTC=1)


A - 224


Line

Symbol Information


Symbol Graphic Name: LN_Road_AllWeather_LooseSurface_Construction_NoMedian_MultipleLanes Symbol Graphic

Symbol Placement Instructions: The 4 lines are centred on the linear geometry. Display Level: Bottom:PaperWhite

0.8mm Bottom Mid:Black_0.8mm-3.0mmLenDash-1.5mm, Top Mid:PaperWhite 0.5mm Top: Dk-Brown1815_0.5mm-3-3-

1.5-1.5-1.5-3mm Dashed line

Element Name: Road_LooseSurface_Construction_NoMedian_MultipleLanes Element Reference: L00190 Element Type: Line - Complex







Line Style 4: Dk-Brown1815_0.5mm-3-3-1.5-1.5-1.5-3DashLine

Note: The 4 lines are centred on the linear geometry. Display Level: Bottom:PaperWhite 0.8mm Bottom

Mid:Black_0.8mm-3.0mmLenDash-1.5mm, Top Mid:PaperWhite 0.5mm Top:

Dk-Brown1815_0.5mm-3-3-1.5-1.5-1.5-3mm Dashed line




Line Weight: 0.8mm





Element Reference: L00186 Element Type: Line - SimpleElement Name: PaperWhite_0.5mmSolidLine



Line Weight: 0.5mm


Description: Dk-Brown1815 0.5mm Dashed line (0.5mm wt; Dash1: 3.0mm Gap1: 3.0mm; Dash2:1.5mm Gap2: 1.5mm; Dash3: 1.5mm Gap3: 3.0mm)

Element Type: Line - StyledElement Name: Dk-Brown1815_0.5mm-3-3-1.5-1.5-1.5-3DashLine







/ 2 or more lanes / unpaved / all

weather (line)


(RST=2) and (WTC=1)


A - 225

DN: 09-048 17 November 2009Roadside Rest Area (AQ135)Area

Symbol Information


Symbol Graphic Name: AR_Black_RestArea Symbol Graphic


ü

Parameters:

Line Weight: 0.2mm

Dash Length: 2.0mm

Dash Spacing: 0.5mm



Colour Token: Black



MGCP50K AAQ135 R000050 Roadside Rest Area / all (area)



DN: 09-048 17 November 2009Rock Formation (DB160)Area

Symbol Information


Symbol Graphic Name: AR_Dk-Brown1815_ColumnarRock_Outline Symbol Graphic

Symbol Placement Instructions: The line is placed around the perimeter of the feature.

ü

Description: Dk-Brown1815 02 Solid Line with a Red-Brown 02-01 Tick (0.2mm wt, 0.1mm long, 0.8mm interval)

Element Type: Line - Complex Element Reference: L00100Element Name: Dk-Brown1815_Columnar-Rock-Outline

Parameters:








Parameters:

Line weight: 0.2mm






Parameters:



MGCP50K ADB160 R000085 Rock Formation / all (area)


Point

Symbol Information


Symbol Graphic Name: PT_Dk-Brown1815_RockFormation Symbol Graphic

Symbol Placement Instructions: Origin: Centre of tick circle

ü

Element Type: Point - Simple Element Reference: P00071Element Name: Dk-Brown1815_0.25mmTickCircle

Description: A set of Dk-Brown1815 ticks radiating out from a circle. The circle is not portrayed just a reference for building the symbol.


Diameter: 0.244mm


Note: Centre (circle) diameter: 0.244mm Tick Placement: in 60 degree increments clockwise starting at 30

degrees from North. Overall Tick diameter: 1.44mm


MGCP50K PDB160 R000277 Rock Formation / all (point)



DN: 09-048 17 November 2009Ruins (AL200)Area

Symbol Information


Symbol Graphic Name: AR_Black_Ruins Symbol Graphic


ü

Parameters:

Line Weight: 0.2mm

Dash Length: 2.0mm

Dash Spacing: 0.5mm



Colour Token: Black



MGCP50K AAL200 R000042 Ruins / all (area)


Runway (GB055)Area

Symbol Information


Symbol Graphic Name: AR_Blue072_Runway Symbol Graphic


ü

Parameters:




Note: Solid Fill


MGCP50K AGB055 R000111 Runway / all (area)



DN: 09-048 17 November 2009Sabkha (BH160)Area

Symbol Information


Symbol Graphic Name: AR_Cyan_Sabkha Symbol Graphic


ü

Parameters:

Description: Cyan Sabkha Fill

Element Type: Area - Pattern Element Reference: A00016Element Name: Cyan_SabkhaFill

Colour Token: Cyan

Area Pattern: See Element: Cyan_SabkhaFill in Annex I



MGCP50K ABH160 R000072 Sabkha / all (area)


Salt Evaporator (BH155)Area

Symbol Information


Symbol Graphic Name: AR_Cyan_SaltEvaporator Symbol Graphic

Symbol Placement Instructions: The line is placed around the perimeter of the feature. The area pattern fills the

extents of the geometry of the feature.

ü

Colour Token: Cyan

Element Name: Cyan_SaltEvaporatorFill Element Reference: A00044 Element Type: Area - Pattern

Description: A grid pattern comprised of 1.5mm x 1.5mm squares. Grid alignment is parallel to longest axis of the perimeter line and centred.

Parameters:

Note: Lineweight: 0.2mm; Length: 1.5mm; Grid squares: 1.5mm x 1.5mm; Grid alignment parallel to longest axis

of perimeter line and centred




Line Weight: 0.2mm


MGCP50K ABH155 R000320 Salt Evaporator / all (area)



DN: 09-048 17 November 2009Sand Dunes (DB170)Area

Symbol Information


Symbol Graphic Name: AR_Dk-Brown1815_SandDunes_Unknown Symbol Graphic

Symbol Placement Instructions: Must rotate to nearest 15 degrees

ü

Parameters:







MGCP50K ADB170 R000086 Sand Dunes / unknown (area) SDT = 0


Symbol Information


Symbol Graphic Name: AR_Dk-Brown1815_SandDunes_Crescent Symbol Graphic


Parameters:

Description: Dk-Brown1815 Crescent Sand Dunes Fill

Element Type: Area - Pattern Element Reference: A00031Element Name: Dk-Brown1815_CrescentDunesFill


Area Pattern: See Element: Dk-Brown1815_CrescentDunesFill in Annex I



MGCP50K ADB170 R000087 Sand Dunes / crescent (area) SDT = 1



DN: 09-048 17 November 2009Sand Dunes (DB170) (continued)

Area

Symbol Information


Symbol Graphic Name: AR_Dk-Brown1815_SandDunes_Dome Symbol Graphic


Parameters:

Description: Dk-Brown1815 Dome Sand Dunes Fill

Element Type: Area - Pattern Element Reference: A00042Element Name: Dk-Brown1815_DomeDunesFill


Area Pattern: See Element: Dk-Brown1815_DomeDunesFill in Annex I



MGCP50K ADB170 R000088 Sand Dunes / dome, or dome and

transverse (area)

(SDT = 2 or SDT = 8)


Symbol Information


Symbol Graphic Name: AR_Dk-Brown1815_SandDunes_Transverse Symbol Graphic


Parameters:

Description: Dk-Brown1815 Transverse Sand Dunes Fill

Element Type: Area - Pattern Element Reference: A00034Element Name: Dk-Brown1815_TransverseDunesFill


Area Pattern: See Element: Dk-Brown1815_TransverseDunesFill in Annex I



MGCP50K ADB170 R000089 Sand Dunes / transverse (area) SDT = 3


A - 231


Area

Symbol Information


Symbol Graphic Name: AR_Dk-Brown1815_SandDunes_Linear Symbol Graphic


Parameters:

Description: DK-Brown1815 Linear Sand Dunes Fill

Element Type: Area - Pattern Element Reference: A00043Element Name: Dk-Brown1815_LinearDunesFill


Area Pattern: See Element: Dk-Brown1815_LinearDunesFill in Annex I



MGCP50K ADB170 R000090 Sand Dunes / linear (area) SDT = 4


Symbol Information


Symbol Graphic Name: AR_Dk-Brown1815_SandDunes_Ripple Symbol Graphic


Parameters:

Description: Dk-Brown1815 Ripple Sand Dunes Fill

Element Type: Area - Pattern Element Reference: A00032Element Name: Dk-Brown1815_RippleDunesFill


Area Pattern: See Element: Dk-Brown1815_RippleDunesFill in Annex I



MGCP50K ADB170 R000091 Sand Dunes / ripple (area) SDT = 6


A - 232


Area

Symbol Information


Symbol Graphic Name: AR_Dk-Brown1815_SandDunes_Star Symbol Graphic


Parameters:

Description: Dk-Brown1815 Star Sand Dunes Fill

Element Type: Area - Pattern Element Reference: A00033Element Name: Dk-Brown1815_StarDunesFill


Area Pattern: See Element: Dk-Brown1815_StarDunesFill in Annex I



MGCP50K ADB170 R000092 Sand Dunes / star (area) SDT = 7


Seaplane Base (GB065)Point

Symbol Information


Symbol Graphic Name: PT_Blue072_SeaplaneBase Symbol Graphic

Symbol Placement Instructions: Origin: Centre of open large open circle

ü

Element Type: Point - Shape Element Reference: P00098Element Name: Blue072_AnchorInsignia

Description: A Blue072 Anchor inside of a blue072 open circle


Detail: Blue072_AnchorInsignia

Note: See Element: Blue072_AnchorInsignia in Annex H for detailed drawing instructions.


MGCP50K PGB065 R000414 Seaplane Base / all (point)



DN: 09-048 17 November 2009Seawall (BB230)Line

Symbol Information


Symbol Graphic Name: LN_Black_Seawall Symbol Graphic


ü




Line Weight: 0.2mm


MGCP50K LBB230 R000396 Seawall / all (line)



DN: 09-048 17 November 2009Settlement (AL105)Area

Symbol Information


Symbol Graphic Name: AR_Black_Settlement Symbol Graphic

Symbol Placement Instructions: The area geometry of the feature is filled with the specified colour and the line is

placed around the perimeter of the feature.

ü




Parameters:





Line Weight: 0.1mm


MGCP50K AAL105 R000318 Settlement / all (area)


Point

Symbol Information


Symbol Graphic Name: PT_Settlement Symbol Graphic


ü

POINT LABEL ONLY


MGCP50K PAL105 R000237 Settlement / all (point)



DN: 09-048 17 November 2009Settling Pond (AC030)Area

Symbol Information


Symbol Graphic Name: AR_Cyan_SettlingPond Symbol Graphic

Symbol Placement Instructions: The line is placed around the perimeter of the feature. The linear pattern is used to

"fill" the area geometry.

ü

Colour Token: Cyan



Parameters:







Line Weight: 0.1mm


MGCP50K AAC030 R000014 Settling Pond / all (area)



DN: 09-048 17 November 2009Slipway (BB240)Area

Symbol Information


Symbol Graphic Name: AR_Black_Slipway_Dry Symbol Graphic

Symbol Placement Instructions: The solid line is placed around the perimeter of the area feature.

ü

Parameters:

Line Weight: 0.2mm



Colour Token: Black



MGCP50K ABB240 R000397 Slipway / not covers and uncovers

(area)

(WLE <> 4)


Symbol Information


Symbol Graphic Name: AR_Black_Slipway_CoversUncovers Symbol Graphic






Parameters:






Element Reference: A00049Element Name: CoversUncovers-Fill










Dash Spacing: 0.5mm

Dash Length: 1.0mm

Parameters:

Line Weight: 0.2mm

Colour Token: Black


MGCP50K ABB240 R000398 Slipway / covers and uncovers (area) (WLE = 4)



DN: 09-048 17 November 2009Sluice Gate (BI040)Line

Symbol Information


Symbol Graphic Name: LN_Black_SluiceGate Symbol Graphic


ü




Line Weight: 0.2mm


MGCP50K LBI040 R000185 Sluice Gate / all (line)


Point

Symbol Information


Symbol Graphic Name: PT_Black_SluiceGate Symbol Graphic

Symbol Placement Instructions: Origin: Apex

ü

Element Type: Point - Simple Element Reference: P00035Element Name: Black_0.1mmV







MGCP50K PBI040 R000270 Sluice Gate / all (point)



DN: 09-048 17 November 2009Smokestack (AF010)Point

Symbol Information


Symbol Graphic Name: PT_Black_Smokestack Symbol Graphic


ü








MGCP50K PAF010 R000203 Smokestack / non-obstruction (point) (HGT < 46)


Symbol Information


Symbol Graphic Name: PT_Blue072_Smokestack_VO Symbol Graphic








MGCP50K PAF010 R000204 Smokestack / single obstruction

(point)

(HGT >= 46)



DN: 09-048 17 November 2009Smokestack (AF010) (continued)

Point

Symbol Information


Symbol Graphic Name: PT_Blue072_Smokestack_MultipleVOs Symbol Graphic

Symbol Placement Instructions: Use this "multiple vertical obstruction" symbol rather than the Smokestack single


of dot







MGCP50K PAF010 R000478 Smokestack / multiple obstructions

(point)

*None


Snow Field and/or Ice-Field (BJ100)Area

Symbol Information


Symbol Graphic Name: AR_Cyan_SnowIceField Symbol Graphic

Symbol Placement Instructions: The area geometry is filled with the specified colour while the line is placed around the


ü



Description: Cyan-4 area fill (Cyan 4% screen, 45 degree angle)

Parameters:





Line Weight: 0.2mm

Dash Length: 2.0mm

Dash Spacing: 0.5mm


MGCP50K ABJ100 R000076 Snow Field and/or Ice-Field / all (area)





DN: 09-048 17 November 2009Soil Surface Region (DA010)Area

Symbol Information


Symbol Graphic Name: AR_Dk-Brown1815_SoilSurface_DistortedSurface Symbol Graphic


Parameters:

Description: Dk-Brown1815 Distorted Surface Fill

Element Type: Area - Pattern Element Reference: A00030Element Name: Dk-Brown1815_DistortedSurfaceFill


Area Pattern: See Element: Dk-Brown1815_DistortedSurfaceFill in Annex I



MGCP50K ADA010 R000079 Soil Surface Region / small / boulders,

lava, loess, mud, oil, rock, frozen

water, soil, evaporite, ice, snow,

limestone, unknown, or other (area)

(ARA < 360,000) and (SMC=8 or SMC=52 or SMC=55

or SMC=65 or SMC=67 or SMC=84 or SMC=103 or

SMC=104 or SMC=122 or SMC=257 or SMC=258 or

SMC=269 or SMC=999)


Symbol Information


Symbol Graphic Name: AR_SoilSurface_Unknown Symbol Graphic

Symbol Placement Instructions: Do not symbolize this feature with these conditions.

DO NOT SYMBOLIZE


MGCP50K ADA010 R000485 Soil Surface Region / Unknown (SMC = 0)


Symbol Information


Symbol Graphic Name: AR_SoilSurface_DistortedSurface-Large Symbol Graphic

Symbol Placement Instructions: Dynamic text label only. No Graphic Parameters. Label using SMC attribute value

spaced over area at 100 mm interval from nearest neighbour.

AREA LABEL ONLY


MGCP50K ADA010 R000078 Soil Surface Region / large / boulders,

lava, loess, mud, oil, rock, frozen

water, soil, evaporite, ice, snow,

limestone, unknown, or other (area)

(ARA >= 360,000) and (SMC=0 or SMC=8 or SMC=52

or SMC=55 or SMC=65 or SMC=67 or SMC=84 or

SMC=103 or SMC=104 or SMC=122 or SMC=257 or

SMC=258 or SMC=269 or SMC=999)


A - 241

DN: 09-048 17 November 2009Soil Surface Region (DA010) (continued)

Area

Symbol Information


Symbol Graphic Name: AR_Dk-Brown1815_SoilSurface_SandandGravel Symbol Graphic


Parameters:


Element Type: Area - Pattern Element Reference: A00036Element Name: Dk-Brown1815_SandandGravelFill


Area Pattern: See Element: Dk-Brown1815_SandandGravelFill in Annex I



MGCP50K ADA010 R000080 Soil Surface Region / gravel, or sand

and gravel (area)

(SMC = 46 or SMC = 120)


Symbol Information


Symbol Graphic Name: AR_Dk-Brown1815_SoilSurface_Sand Symbol Graphic


Parameters:







MGCP50K ADA010 R000081 Soil Surface Region / sand (area) SMC = 88


A - 242

DN: 09-048 17 November 2009Soil Surface Region (DA010) (continued)

Area

Symbol Information


Symbol Graphic Name: AR_Dk-Brown1815_SoilSurface_SandandMud_Boulders Symbol Graphic


Parameters:







MGCP50K ADA010 R000082 Soil Surface Region / sand and

boulders, or sand and mud (area)

(SMC = 124 or SMC = 126 )


Solar Panel (AD020)Point

Symbol Information


Symbol Graphic Name: PT_Black_SolarPanel Symbol Graphic


ü




Length: 0.8mm


MGCP50K PAD020 R000362 Solar Panel / all (point)



DN: 09-048 17 November 2009Spot Elevation (Spot Elevation)Point

Symbol Information


Symbol Graphic Name: PT_Black_SpotElevation Symbol Graphic

Symbol Placement Instructions: Origin: Centre of filled black circle

ü

Element Type: Point - Simple Element Reference: P00081Element Name: Black_0.64mmDotFilled



Diameter: 0.64mm


MGCP50K Spot

Elevation

R000307 Spot Elevation / accurate (point) Accuracy = Accurate


Symbol Information


Symbol Graphic Name: PT_SpotElevation_Approximate Symbol Graphic


POINT LABEL ONLY


MGCP50K Spot

Elevation

R000443 Spot Elevation / approximate (point) Accuracy = Approximate



DN: 09-048 17 November 2009Stadium (AK160)Area

Symbol Information


Symbol Graphic Name: AR_Black_Stadium Symbol Graphic


ü

Parameters:

Line Weight: 0.5mm



Colour Token: Black



MGCP50K AAK160 R000023 Stadium / all (area)


Point

Symbol Information


Symbol Graphic Name: PT_Black_Stadium Symbol Graphic


ü




Length: 0.8mm


MGCP50K PAK160 R000216 Stadium / non-obstruction (point) (HGT < 46)



DN: 09-048 17 November 2009Stadium (AK160) (continued)

Point

Symbol Information


Symbol Graphic Name: PT_Blue072_Stadium_VO Symbol Graphic








MGCP50K PAK160 R000217 Stadium / single obstruction (point) (HGT >= 46)


Symbol Information


Symbol Graphic Name: PT_Blue072_Stadium_MultipleVOs Symbol Graphic

Symbol Placement Instructions: Use this "multiple vertical obstruction" symbol rather than the Stadium single vertical








MGCP50K PAK160 R000479 Stadium / multiple obstructions (point) *None


A - 246



DN: 09-048 17 November 2009Steep Terrain Face (DB010)Line

Symbol Information


Symbol Graphic Name: LN_Dk-Brown1815_Cliff_High Symbol Graphic


ü


Element Type: Line - Complex Element Reference: L00064Element Name: Dk-Brown1815_Cliff (High)

Parameters:








Parameters:

Line weight: 0.2mm






Parameters:



MGCP50K LDB010 R000187 Steep Terrain Face / all (line)


Storage Depot (AM010)Area

Symbol Information


Symbol Graphic Name: AR_Black_StorageDepot Symbol Graphic


ü

Parameters:

Line Weight: 0.2mm

Dash Length: 2.0mm

Dash Spacing: 0.5mm



Colour Token: Black



MGCP50K AAM010 R000043 Storage Depot / all (area)



DN: 09-048 17 November 2009Storage Tank (AM070)Area

Symbol Information


Symbol Graphic Name: AR_Black_StorageTank Symbol Graphic



ü

Parameters:



Colour Token: Black

Note: Solid Fill


MGCP50K AAM070 R000047 Storage Tank / all (area)


Point

Symbol Information


Symbol Graphic Name: PT_Black_StorageTank Symbol Graphic


ü

Element Type: Point - Simple Element Reference: P00053Element Name: Black_0.8mmDotFilled



Diameter: 0.8mm


MGCP50K PAM070 R000246 Storage Tank / non-obstruction (point) (HGT < 46)



DN: 09-048 17 November 2009Storage Tank (AM070) (continued)

Point

Symbol Information


Symbol Graphic Name: PT_Blue072_StorageTank_VO Symbol Graphic








MGCP50K PAM070 R000247 Storage Tank / single obstruction

(point)

(HGT >= 46)


Symbol Information


Symbol Graphic Name: PT_Blue072_StorageTank_MultipleVOs Symbol Graphic

Symbol Placement Instructions: Use this "multiple vertical obstruction" symbol rather than the Storage Tank single


of dot







MGCP50K PAM070 R000480 Storage Tank / multiple obstructions

(point)

*None


A - 249



DN: 09-048 17 November 2009Structural Pile (BD100)Area

Symbol Information


Symbol Graphic Name: AR_Cyan-31_StructuralPile Symbol Graphic

Symbol Placement Instructions: The linear symbology is placed around the perimeter of the feature and the area

geometry of the feature is filled with the specified colour.

ü





Element Name: Black_Dotted-Line Element Reference: L00144 Element Type: Line - Complex

Description: Black 0.25mm diameter filled dots repeating along the line but without a line style. The spacing between dots is 0.750mm


Line Style: 0mmLine



Element Name: 0mmLine Element Reference: L00145 Element Type: Line - Simple



Line Weight: 0.0mm




Diameter: 0.25mm


MGCP50K ABD100 R000400 Structural Pile / all (area)


Point

Symbol Information


Symbol Graphic Name: PT_Black_StructuralPile Symbol Graphic


ü

Element Type: Point - Shape Element Reference: P00097Element Name: Black_Doughnut

Description: A Black filled circle with a white hole cut out of the middle.


Detail: Black_Doughnut

Note: See Element: Black_Doughnut in Annex H for detailed drawing instructions.


MGCP50K PBD100 R000401 Structural Pile / all (point)



DN: 09-048 17 November 2009Surface Bunker (AM060)Area

Symbol Information


Symbol Graphic Name: AR_Black_SurfaceBunker Symbol Graphic


ü

Parameters:

Line Weight: 0.2mm

Dash Length: 2.0mm

Dash Spacing: 0.5mm



Colour Token: Black



MGCP50K AAM060 R000046 Surface Bunker / all (area)


Point

Symbol Information


Symbol Graphic Name: PT_Dk-Brown1815_SurfaceBunker Symbol Graphic


ü

Element Name: Surface-Bunker Element Reference: P00080 Element Type: Point - Complex

Description: Dk-Brown1815 ticks radiating out from the top 1/2 of an ellipse. Beneath the ticks is a solid Dk-Brown1815 line along with a black

headline and wing ticks.


Point 1 Name: Dk-Brown1815_SurfaceBunker

Point 2 Name: Black_15mmHeadline&WingTicks

Note: Wing tick ends touch the base of the "Dk-Brown1815_SurfaceBunker" point element

Description: A Dk-Brown1815 Surface Bunker

Element Name: Dk-Brown1815_SurfaceBunker Element Reference: P00021 Element Type: Point - Shape


Detail: Dk-Brown1815_SurfaceBunker

Note: See Element: Dk-Brown1815_SurfaceBunker in Annex H for detailed drawing instructions.

Element Reference: P00037 Element Type: Point - SimpleElement Name: Black_15mmHeadline&WingTicks

Description: A Black 0.15mm lineweight line that is 2.5mm long. At each end of the 2.5mm long line there is a Black 0.15mm lineweight line that is

0.8mm long attached at a 45 degree angle


Headline: Line weight: 0.15mm

Length: 2.500mm

Wingtick: Line weight: 0.15mm

Length: 0.800mm

Note: Wing tick 45 degree angle outward from headline ends.


MGCP50K PAM060 R000245 Surface Bunker / all (point)



DN: 09-048 17 November 2009Swamp (ED020)Area

Symbol Information


Symbol Graphic Name: AR_Cyan_Swamp Symbol Graphic


ü

Parameters:



Colour Token: Cyan




MGCP50K AED020 R000107 Swamp / all (area)


Taxiway (GB075)Area

Symbol Information


Symbol Graphic Name: AR_Blue072_Taxiway Symbol Graphic


ü

Parameters:




Note: Solid Fill


MGCP50K AGB075 R000112 Taxiway / all (area)



DN: 09-048 17 November 2009Test Site (FA100)Area

Symbol Information


Symbol Graphic Name: AR_Black_TestSite Symbol Graphic

Symbol Placement Instructions: The line is placed around the perimeter of the area feature.

ü

Parameters:

Line Weight: 0.2mm

Dash Length: 2.0mm

Dash Spacing: 0.5mm



Colour Token: Black



MGCP50K AFA100 R000402 Test Site / all (area)


Thicket (EB020)Area

Symbol Information


Symbol Graphic Name: AR_Green362_Thicket Symbol Graphic


ü

Parameters:

Description: Green362 Scrub/Thicket Fill

Element Type: Area - Pattern Element Reference: A00027Element Name: Green362_ScrubThicketFill


Area Pattern: See Element: Green362_ScrubThicketFill in Annex I



MGCP50K AEB020 R000098 Thicket / all (area)



DN: 09-048 17 November 2009Tidal Water (BA040)Area

Symbol Information


Symbol Graphic Name: AR_Cyan-31_TidalWater Symbol Graphic



ü

Parameters:






MGCP50K ABA040 R000403 Tidal Water / all (area)


Trail (AP050)Line

Symbol Information


Symbol Graphic Name: LN_Black_Trail Symbol Graphic


ü




Line Weight: 0.2mm

Dash Length: 1.0mm

Dash Spacing: 0.5mm


MGCP50K LAP050 R000143 Trail / all (line)



DN: 09-048 17 November 2009Training Wall (BB140)Area

Symbol Information


Symbol Graphic Name: AR_Black_TrainingWall Symbol Graphic


ü

Parameters:

Line Weight: 0.2mm



Colour Token: Black



MGCP50K ABB140 R000404 Training Wall / all (area)


Line

Symbol Information


Symbol Graphic Name: LN_Black_TrainingWall Symbol Graphic


ü




Line Weight: 0.2mm


MGCP50K LBB140 R000405 Training Wall / all (line)



DN: 09-048 17 November 2009Transportation Station (AQ125)Area

Symbol Information


Symbol Graphic Name: AR_Black_TransportationStation Symbol Graphic


ü

Parameters:

Line Weight: 0.2mm

Dash Length: 2.0mm

Dash Spacing: 0.5mm



Colour Token: Black



MGCP50K AAQ125 R000406 Transportation Station / all (area)


Point

Symbol Information


Symbol Graphic Name: PT_TransportationStation Symbol Graphic


ü

POINT LABEL ONLY


MGCP50K PAQ125 R000421 Transportation Station / all (point)


Tundra (BJ110)Area

Symbol Information


Symbol Graphic Name: AR_Tundra Symbol Graphic


ü

AREA LABEL ONLY


MGCP50K ABJ110 R000407 Tundra / all (area)



DN: 09-048 17 November 2009Tunnel (AQ130)Line

Symbol Information


Symbol Graphic Name: LN_Black_Tunnel_Rail Symbol Graphic


ü

Element Name: Black_TunnelRail Element Reference: L00096 Element Type: Line - Complex

Description: Black 0.3mm Dash Line (0.3mm wt, 2.0mm dash, 0.5mm gap) with Tunnel Rail

Fix at Start: Black_0.2mmTick-Entrance/Exit

Fix at End: Black_0.2mmTick-Entrance/Exit

Parameters:

Line Style: Black_0.3mm-2mmLenDash-0.5mmGapLine Colour Token: Black

Note: Wing Ticks always point away from the tunnel line. 1 Tunnel Rail Entrance/Exit placed centred at

opposite ends of the tunnel at 90 degrees to the line







Description: A Black 0.2mm lineweight line 2.0mm long. At each endpoint is a Black wingtick 0.2mm lineweight line 0.6mm long. The wingtick is

attached to the 2.0mm line at a 45 degree angle.













MGCP50K LAQ130 R000155 Tunnel / pedestrian, railway, road and

railway, unknown, or other (line)

(TRS=0 or TRS=9 or TRS=12 or TRS=14 or

TRS=999)



DN: 09-048 17 November 2009Tunnel (AQ130) (continued)

Line

Symbol Information


Symbol Graphic Name: LN_Cyan_Tunnel_Aqueduct Symbol Graphic


Element Name: Cyan_TunnelAqueduct Element Reference: L00094 Element Type: Line - Complex

Description: Cyan 0.2mm Cased Dash Line (0.2mm wt, 2.0mm dash, 0.5mm gap) with Tunnel Water Entrance/Exit

Fix at Start: Cyan0.2mmTick-Entrance/Exit

Fix at End: Cyan0.2mmTick-Entrance/Exit

Parameters:

Line Style: Cased_Cyan_0.2mmDashed-0.5mmGapLine Colour Token: Cyan

Note: Wing Ticks always point away from the tunnel line; 1 Tunnel Water Entrance/Exit placed centred at



Description: Cyan 0.2mm Cased Dash Line (0.2mm wt, 2.0mm dash, 0.5mm gap)

Element Name: Cased_Cyan_0.2mmDashed-0.5mmGapLine



Note: Casing: spacing 1.3mm

Element Name: Cyan0.2mmTick-Entrance/Exit Element Reference: P00074 Element Type: Point - Simple

Description: A Cyan 0.2mm lineweight line 2.0mm long. At each endpoint is a Cyan wingtick 0.2mm lineweight line 0.6mm long. The wingtick is














MGCP50K LAQ130 R000156 Tunnel / aqueduct (line) TRS = 2


A - 258


Line

Symbol Information


Symbol Graphic Name: LN_Cyan_Tunnel_Canal Symbol Graphic


Element Name: Cyan_TunnelCanal Element Reference: L00095 Element Type: Line - Complex

Description: Cyan 0.2mm Dash Line (0.2mm wt, 2.0mm dash, 0.5mm gap) with Tunnel Water Entrance/Exit

Fix at Start: Cyan0.2mmTick-Entrance/Exit

Fix at End: Cyan0.2mmTick-Entrance/Exit

Parameters:

Line Style: Cyan_0.2mm-2mmLenDash-0.5mmGapLine Colour Token: Cyan

Note: Wing Ticks always point away from the tunnel line; 1 Tunnel Water Entrance/Exit placed centred at






















MGCP50K LAQ130 R000157 Tunnel / canal (line) TRS = 5


A - 259


Line

Symbol Information


Symbol Graphic Name: LN_Black_Tunnel_Road Symbol Graphic


Element Name: Black_TunnelRoad Element Reference: L00097 Element Type: Line - Complex

Description: Black 0.3mm Dash Line (0.3mm wt, 2.0mm dash, 0.5mm gap) with Tunnel Road

Fix at Start: Black_0.2mmTick-Entrance/Exit

Fix at End: Black_0.2mmTick-Entrance/Exit

Parameters:

Line Style: Cased_Black_0.3mmDashed-0.5mmGapLine Colour Token: Black

Note: Wing Ticks always point away from the tunnel line. 1 Tunnel Road Entrance/Exit placed centred at



Description: Black 0.3mm Cased Dash Line (0.3mm wt, 2.0mm dash, 0.5mm gap)

Element Name: Cased_Black_0.3mmDashed-0.5mmGapLine



Note: Casing: spacing 1.3mm
















MGCP50K LAQ130 R000158 Tunnel / road (line) TRS = 13


A - 260

DN: 09-048 17 November 2009Vainishing Point (BH145)Point

Symbol Information


Symbol Graphic Name: PT_Cyan_VanishingPoint_Disappearing Symbol Graphic


ü

Element Type: Point - Shape Element Reference: P00028Element Name: Cyan_CircleFilledwithOpenOffsetCircleInside

Description: A Cyan filled circle (1.5 mm diameter) with an open circle offset inside of it


Detail: Cyan_CircleFilledwithOpenOffsetCircleInside

Orientation: Open circle points downstream

Note: See Element: Cyan_CircleFilledwithOpenOffsetCircleInside in Annex H for detailed drawing instructions.


MGCP50K PBH145 R000262 Vanishing Point / disappearing, or

unknown (point)

(WST = 0 or WST = 2)


Symbol Information


Symbol Graphic Name: PT_Cyan_VanishingPoint_Dissipating Symbol Graphic

Symbol Placement Instructions: Origin: Apex

Element Type: Point - Simple Element Reference: P00059Element Name: Cyan_0.2mm-1mmLenV

Description: Two Cyan lines (each 0.2mm lineweight 1.0mm length) intersect at a 90 degree angle. The intersection occurs at the one end of each of

the line segments to form a right angle.



Orientation: Apex points upstream and connects to drainage feature at apex



MGCP50K PBH145 R000263 Vanishing Point / dissipating (point) WST = 1



DN: 09-048 17 November 2009Vehicle Lot (AQ140)Area

Symbol Information


Symbol Graphic Name: AR_Black_VehicleLot Symbol Graphic


ü

Parameters:

Line Weight: 0.2mm

Dash Length: 2.0mm

Dash Spacing: 0.5mm



Colour Token: Black



MGCP50K AAQ140 R000051 Vehicle Lot / all (area)


Void Collection Area (ZD020)Area

Symbol Information


Symbol Graphic Name: AR_Black_VoidCollectionArea Symbol Graphic

Symbol Placement Instructions: The dashed line is placed around the perimeter of the area feature.

ü

Parameters:

Line Weight: 0.2mm

Dash Length: 2.0mm

Dash Spacing: 0.5mm



Colour Token: Black



MGCP50K AZD020 R000408 Void Collection Area / all (area)



DN: 09-048 17 November 2009Volcano (DB180)Area

Symbol Information


Symbol Graphic Name: AR_Volcano Symbol Graphic


ü

AREA LABEL ONLY


MGCP50K ADB180 R000093 Volcano / all (area)


Point

Symbol Information


Symbol Graphic Name: PT_Dk-Brown1815_Volcano Symbol Graphic


ü

Element Type: Point - Simple Element Reference: P00064Element Name: Dk-Brown1815_0.1mmOpenCirclewithTicks

Description: A Dk-Brown1815 0.1mm lineweight circle with a diameter of 1.0mm. Radiating out from the circle are alternating long (1.0mm long) and

short (0.5mm) ticks every 45 degrees


Diameter: 1.0mm (circle)

Length: Long Tick: 1.0mm;

Short Tick: 0.5mm

Line Weight: 0.1mm

Note: Ticks alternate in length (short tick 0.5mm length, long tick 1.000mm length) starting with a long tick at the

top, each at 45 degree angle from the last. Each tick connects with the outside of the circle radiating outwards.


MGCP50K PDB180 R000278 Volcano / all (point)



DN: 09-048 17 November 2009Wall (AL260)Line

Symbol Information


Symbol Graphic Name: LN_Black_Wall Symbol Graphic


ü




Line Weight: 0.3mm


MGCP50K LAL260 R000116 Wall / all (line)


Water Intake Tower (BI050)Point

Symbol Information


Symbol Graphic Name: PT_Black_WaterIntakeTower Symbol Graphic


ü








MGCP50K PBI050 R000271 Water Intake Tower / all (point)



DN: 09-048 17 November 2009Water Tower (AM080)Point

Symbol Information


Symbol Graphic Name: PT_Black_WaterTower Symbol Graphic


ü








MGCP50K PAM080 R000248 Water Tower / non-obstruction (point) (HGT < 46)


Symbol Information


Symbol Graphic Name: PT_Blue072_WaterTower_VO Symbol Graphic








MGCP50K PAM080 R000249 Water Tower / single obstruction

(point)

(HGT >= 46)



DN: 09-048 17 November 2009Water Tower (AM080) (continued)

Point

Symbol Information


Symbol Graphic Name: PT_Blue072_WaterTower_MultipleVOs Symbol Graphic

Symbol Placement Instructions: Use this "multiple vertical obstruction" symbol rather than the Water Tower single


of dot







MGCP50K PAM080 R000481 Water Tower / multiple obstructions

(point)

*None


Water Treatment Bed (BH040)Area

Symbol Information


Symbol Graphic Name: AR_Cyan_WaterTreatmentBed Symbol Graphic


ü

Colour Token: Cyan



Parameters:







Line Weight: 0.2mm


MGCP50K ABH040 R000057 Water Treatment Bed / all (area)





DN: 09-048 17 November 2009Waterfall (BH180)Line

Symbol Information


Symbol Graphic Name: LN_Cyan_Waterfall Symbol Graphic


ü




Line Weight: 0.2mm


MGCP50K LBH180 R000183 Waterfall / all (line)


Point

Symbol Information


Symbol Graphic Name: PT_Cyan_Waterfall Symbol Graphic

Symbol Placement Instructions: Perpendicular to drain. Origin: Centre of line

ü

Element Type: Point - Simple Element Reference: P00061Element Name: Cyan_0.2mm-1.5mmLenLine






MGCP50K PBH180 R000266 Waterfall / all (point)



DN: 09-048 17 November 2009Well (AA050)Point

Symbol Information


Symbol Graphic Name: PT_Black_Well_Notwater Symbol Graphic


ü

Element Type: Point - Shape Element Reference: P00009Element Name: Black_CircleOpen

Description: Black open circle (Diameter = 1.0mm, lineweight of boundary around circumference - 0.15mm).


Detail: Black_CircleOpen

Note: See Element: Black_CircleOpen in Annex H for detailed drawing instructions.


MGCP50K PAA050 R000198 Well / not water (point) PPO <>122


Symbol Information


Symbol Graphic Name: PT_Cyan_Well_WaterPerennial Symbol Graphic


Element Type: Point - Shape Element Reference: P00041Element Name: Cyan_DotFilled

Description: A Cyan filled circle (or dot)


Detail: Cyan_DotFilled

Note: See Element: Cyan_DotFilled in Annex H for detailed drawing instructions.


MGCP50K PAA050 R000199 Well / perennial / water (point) (HYP = 1) and (PPO = 122)



DN: 09-048 17 November 2009Well (AA050) (continued)

Point

Symbol Information


Symbol Graphic Name: PT_Cyan_Well_WaterIntermittent Symbol Graphic


Element Type: Point - Shape Element Reference: P00040Element Name: Cyan_CircleOpen

Description: A Cyan open circle


Detail: Cyan_CircleOpen

Note: See Element: Cyan_CircleOpen in Annex H for detailed drawing instructions.


MGCP50K PAA050 R000200 Well / not perennial / water (point) (HYP <> 1) and (PPO = 122)


A - 269

DN: 09-048 17 November 2009Windmill (AJ050)Point

Symbol Information


Symbol Graphic Name: PT_Black_Windmill Symbol Graphic


ü








MGCP50K PAJ050 R000212 Windmill / non-obstruction (point) (HGT < 46)


Symbol Information


Symbol Graphic Name: PT_Blue072_Windmill_VO Symbol Graphic








MGCP50K PAJ050 R000213 Windmill / single obstruction (point) (HGT >= 46)



DN: 09-048 17 November 2009Windmill (AJ050) (continued)

Point

Symbol Information


Symbol Graphic Name: PT_Blue072_Windmill_MultipleVOs Symbol Graphic

Symbol Placement Instructions: Use this "multiple vertical obstruction" symbol rather than the Windmill single vertical








MGCP50K PAJ050 R000482 Windmill / multiple obstructions (point) *None


A - 271



DN: 09-048 17 November 2009Windmotor (AJ051)Point

Symbol Information


Symbol Graphic Name: PT_Black_Windmotor Symbol Graphic


ü








MGCP50K PAJ051 R000214 Windmotor / non-obstruction (point) (HGT < 46)


Symbol Information


Symbol Graphic Name: PT_Blue072_Windmotor_VO Symbol Graphic








MGCP50K PAJ051 R000215 Windmotor / single obstruction (point) (HGT >= 46)



DN: 09-048 17 November 2009Windmotor (AJ051) (continued)

Point

Symbol Information


Symbol Graphic Name: PT_Blue072_Windmotor_MultipleVOs Symbol Graphic

Symbol Placement Instructions: Use this "multiple vertical obstruction" symbol rather than the Windmotor single


of dot







MGCP50K PAJ051 R000483 Windmotor / multiple obstructions

(point)

*None


A - 273



DN: 09-048 17 November 2009Wood (EC030)Area

Symbol Information


Symbol Graphic Name: AR_Green362-31_Woodland_Evergreen Symbol Graphic

Symbol Placement Instructions: Black Evergreen Tree Fill and Green362_31 Area Fill are combined as one symbol

ü

Element Name: Woodland-Evergreen

Parameters:

Area Fill/Pattern 1: Green362-31_ScreenFill

Area Fill/Pattern 2: Green362_EvergreenTreeFill



Description: Green362-31_ScreenFill (area fill) coincident with Green362_EvergreenTreeFill (area pattern)

Element Reference: A00037

Note: The two area elements are combined as one symbol

Element Name: Green362-31_ScreenFill Element Reference: A00009 Element Type: Area - Fill

Description: Green362-31_ScreenFill area fill (Green362 31% screen, 45 degree angle)

Colour Token: Green362-31 Parameters:


Colour Token: Green362 Parameters:

Area Pattern: See Element: Green362_EvergreenTreeFill in Annex I

Description: Green362 EvergreenTreeFill area pattern

Element Name: Green362_EvergreenTreeFill Element Reference: A00012 Element Type: Area - Pattern



MGCP50K AEC030 R000100 Wood / canopy cover >= 51 /

coniferous / casuarina, palm, filao,

cypress, eucalyptus, or other (area)

(DMT >= 51) and (TRE = 2) and (VSP = 4 or VSP

=25 or VSP = 11 or VSP = 8 or VSP = 999 or VSP =

10)



DN: 09-048 17 November 2009Wood (EC030) (continued)

Area

Symbol Information


Symbol Graphic Name: AR_Green362-31_Woodland_Deciduous Symbol Graphic

Symbol Placement Instructions: Black Deciduous Tree Fill and Green362_31 Area Fill are combined as one symbol

Element Name: Woodland-Deciduous

Parameters:


Area Fill/Pattern 2: Green362_DeciduousTreeFill



Description: Green362-31_ScreenFill (area fill) coincident with Green362_DeciduousTreeFill (area pattern)








Area Pattern: See Element: Green362_DeciduousTreeFill in Annex I

Description: Green362 DeciduousTreeFill area pattern

Element Name: Green362_DeciduousTreeFill Element Reference: A00011 Element Type: Area - Pattern



MGCP50K AEC030 R000101 Wood / canopy cover >= 51 /

deciduous (area)

(DMT >= 51) and (TRE = 1)


A - 275


Area

Symbol Information


Symbol Graphic Name: AR_Green362-31_Woodland_Mixed Symbol Graphic

Symbol Placement Instructions: Black Mixed Tree Fill and Green362_31 Area Fill are combined as one symbol

Element Name: Woodland-Mixed

Parameters:


Area Fill/Pattern 2: Green362_MixedTreeFill



Description: Green362-31_ScreenFill (area fill) coincident with Green362_MixedTreeFill (area pattern)








Area Pattern: See Element: Green362_MixedTreeFill in Annex I

Description: Green362 MixedTreeFill area pattern

Element Name: Green362_MixedTreeFill Element Reference: A00013 Element Type: Area - Pattern



MGCP50K AEC030 R000102 Wood / canopy cover >= 51 / mixed

(area)

(DMT >= 51) and (TRE = 3)


Symbol Information


Symbol Graphic Name: AR_Green362_Woodland_ScatteredTrees Symbol Graphic


Parameters:

Description: Green362 Woodland Scattered Trees Fill

Element Type: Area - Pattern Element Reference: A00047Element Name: Woodland-ScatteredTrees


Area Pattern: See Element: Woodland-ScatteredTrees in Annex I



MGCP50K AEC030 R000333 Wood / canopy cover >= 25 and < 51 /

coniferous / not mangrove and not

nipa (area)

(DMT>=25 and DMT<51) and (VSP<>19 and

VSP<>22)


A - 276


Area

Symbol Information


Symbol Graphic Name: AR_Green362_Mangrove Symbol Graphic

Symbol Placement Instructions: Green362 Mangrove Fill and Cyan 31_45 Area Fill are combined as one symbol

Element Name: Mangrove

Parameters:


Area Fill/Pattern 2: Green362_MangroveFill



Description: Cyan-31ScreenFill (area fill) coincident with Green362MangroveFill (area pattern)


Note: The two area fills are combined as one symbol






Area Pattern: See Element: Green362_MangroveFill in Annex I

Description: Green362 Mangrove Fill area pattern

Element Name: Green362_MangroveFill Element Reference: A00025 Element Type: Area - Pattern



MGCP50K AEC030 R000103 Wood / coniferous / mangrove (area) (TRE = 2) and (VSP = 19)


A - 277


Area

Symbol Information


Symbol Graphic Name: AR_Green362_NipaPalm Symbol Graphic

Symbol Placement Instructions: Green362 Nipa Palm Fill and Cyan 31_45 Area Fill are combined as one symbol

Element Name: NipaPalm

Parameters:


Area Fill/Pattern 2: Green362_NipaPalmFill



Description: Cyan-31ScreenFill (area fill) coincident with Green362NipaPalmFill (area pattern)


Note: The two area fills are combined as one symbol






Area Pattern: See Element: Green362_NipaPalmFill in Annex I

Description: Green362 Nipa Palm Fill area pattern

Element Name: Green362_NipaPalmFill Element Reference: A00024 Element Type: Area - Pattern



MGCP50K AEC030 R000104 Wood / coniferous / nipa (area) (TRE = 2) and (VSP = 22)


Line

Symbol Information


Symbol Graphic Name: LN_Green362-54_Wood Symbol Graphic


ü

Element Name: Green362-54_0.4mmScreenedLine Element Reference: L00022 Element Type: Line - Simple

Description: Green362-54 0.4 Solid Screened Line (0.4mm wt)


Line Weight: 0.4mm

Screen Angle: 30/60 degrees biangle


MGCP50K LEC030 R000340 Wood / all (line)


Point



Point

Symbol Information


Symbol Graphic Name: PT_Green362_Wood Symbol Graphic

Symbol Placement Instructions: Origin: Centreline intersection of trunk and base

ü

Element Type: Point - Shape Element Reference: P00030Element Name: Green362_Tree

Description: A Green362 Tree outline with 2 dots beside it


Detail: Green362_Tree

Note: See Element: Green362_Tree in Annex H for detailed drawing instructions.


MGCP50K PEC030 R000279 Wood / all (point)


Zoo (AK180)Area

Symbol Information


Symbol Graphic Name: AR_Black_Zoo Symbol Graphic


ü

Parameters:

Line Weight: 0.2mm

Dash Length: 2.0mm

Dash Spacing: 0.5mm



Colour Token: Black



MGCP50K AAK180 R000024 Zoo / all (area)



DN: 09-048 17 November 2009

B-1

Annex B - Colour (normative)

Colour

This Annex provides a mapping from a specific colour token to Pantone colour names, the MIL-STD-2402 based SPC Ink colours, CMYK and RGB values. This mapping allows considerable flexibility in specifying equivalent colours in a variety of methodologies. The colour token name provides a link to Annexes A and D.

Colours

Colour Token Description Pantone Ink Number C M Y K R G B SPC #

DN: 09-048 17 November 2009

Black Black Process Black U 0 0 0 100 0 0 0 58600

Black-12 Black12% Process Black U 0 0 0 12 224 224 224 58600




Blue072 Blue Blue 072 U 100 100 0 0 40 22 111 46351

Cyan Cyan Process Cyan U 100 0 0 0 0 159 218 48253

Cyan-31 Cyan31% Process Cyan U 31 0 0 0 176 255 255 48253

Cyan-4 Cyan4% Process Cyan U 4 0 0 0 242 252 252 48253

Dk-Brown1815 Dark Brown 1815 U 0 80 70 40 120 35 39 61121

Dk-Brown1815-42 Dark Brown42% 1815 U 0 15 10 5 234 200 195 61121



Green362 Green 362 U 100 0 100 0 63 156 53 52813

Green362-31 Green31% 362 U 30 0 30 0 168 228 198 52813

Green362-54 Green54% 362 U 40 0 50 0 136 215 162 52813

Green362-7 Green7% 362 U 5 0 10 0 244 255 237 52813

Paper-White Paper White None 0 0 0 0 255 255 255

B - 2

DN: 09-048 17 November 2009

C-1

Annex C – MGCP50K Label Information (normative)

MGCP50K Label Information

The MGCP50K label requirements are provided in this Annex. The Feature Name and Rule Reference provide the link to Annex A MGCP Symbols.

MGCP 50K Label Information

DN: 09-048 17 November 2009

Administrative Boundary ( Administrative Boundary )

Rule Reference: R000308 Description: Administrative Boundary / cease fire (line)

Additional Labeling Criteria: N/A

Label String: "Cease-fire line" [ACC]

Characteristics: 21,21

Rule Reference: R000309 Description: Administrative Boundary / international (line)


Label String: [NM3] [BST] [ACC]

[NM4]

Characteristics: 21,21,21,21

Rule Reference: R000310 Description: Administrative Boundary / armistice line (line)


Label String: [NM3] "Armistice line"

[NM4]

Characteristics: 21,21,21

Rule Reference: R000311 Description: Administrative Boundary / other (line)


Label String: [USE]

Characteristics: 21

C - 2

DN: 09-048 17 November 2009

Administrative Division ( Administrative Division )

Rule Reference: R000312 Description: Administrative Division / primary (area)


Label String: [NM3]

[NM4]


Rule Reference: R000313 Description: Administrative Division / secondary (area)


Label String: [NM3]

[NM4]


Rule Reference: R000314 Description: Administrative Division / tertiary (area)


Label String: [NM3]

[NM4]


Aerodrome ( GB005 )

Rule Reference: R000108 Description: Aerodrome / all (area)


Label String: [NAM] [FUN]


C - 3

DN: 09-048 17 November 2009

Air Obstruction ( GB220 )

Rule Reference: R000283 Description: Air Obstruction / single obstruction (point)


Label String: "Air obstruction/"[NAM]

[FUN]

[ZVH]

"("[HGT]")"

Characteristics: 15,15,15,46,15

Rule Reference: R000460 Description: Air Obstruction / multiple obstructions (point)


Label String: "Air obstruction/"[NAM]

[FUN]

[ZVH]

"("[HGT]")"


Aircraft Revetment ( GB050 )

Rule Reference: R000359 Description: Aircraft Revetment / all (line)


Label String: "Revetment"

Characteristics: 15

Airport Navigation Lights ( GB010 )

Rule Reference: R000281 Description: Airport Navigation Lights / strobe (point)


Label String: "Fl"

Characteristics: 24

Amusement Park ( AK030 )

Rule Reference: R000360 Description: Amusement Park / all (area)


Label String: [NAM] "Amusement park"


C - 4

DN: 09-048 17 November 2009

Aqueduct ( BH010 )

Rule Reference: R000165 Description: Aqueduct / unknown, or fully functional / above surface (line)


Label String: "Aqueduct" [FUN]


Rule Reference: R000166 Description: Aqueduct / unknown, or fully functional / on surface or unknown (line)




Rule Reference: R000167 Description: Aqueduct / under construction, abandoned, or destroyed / below ground surface

(line)




Rule Reference: R000168 Description: Aqueduct / unknown, or fully functional / below ground surface (line)




Rule Reference: R000169 Description: Aqueduct / under construction, abandoned, or destroyed / on surface or

unknown (line)




Rule Reference: R000170 Description: Aqueduct / under construction, abandoned, or destroyed / above surface (line)




C - 5

DN: 09-048 17 November 2009

Archaeological Site ( AL012 )

Rule Reference: R000025 Description: Archaeological Site / all (area)


Label String: "Archaeological site"

Characteristics: 3

Beach ( BA050 )

Rule Reference: R000415 Description: Beach / not pebbles (area)


Label String: [NAM] "Beach"


Rule Reference: R000416 Description: Beach / pebbles (area)




Rule Reference: R000411 Description: Beach / all (point)




C - 6

DN: 09-048 17 November 2009

Berthing Structure ( BB190 )

Rule Reference: R000417 Description: Berthing Structure / not submerged (area)

Additional Labeling Criteria: (([PWC] = 0) or ([PWC] is NULL)) and ([WLE] <> 8)

Label String: "Pier"

Characteristics: 12

Additional Labeling Criteria: (([PWC] = 1) or ([PWC] = 2) or ([PWC] = 3)) and ([WLE] <> 8)

Label String: [PWC]

Characteristics: 12

Additional Labeling Criteria: (([PWC] = 0) or ([PWC] is NULL) or ([PWC] = 1)) and ([WLE] = 8)

Label String: "Floating pier"

Characteristics: 12

Rule Reference: R000418 Description: Berthing Structure / submerged (area)



Characteristics: 12


Label String: [PWC]

Characteristics: 12



Characteristics: 12

C - 7

DN: 09-048 17 November 2009

Berthing Structure ( BB190 ) (continued)

Rule Reference: R000419 Description: Berthing Structure / not submerged (line)



Characteristics: 12


Label String: [PWC]

Characteristics: 12



Characteristics: 12

Rule Reference: R000420 Description: Berthing Structure / submerged (line)



Characteristics: 12


Label String: [PWC]

Characteristics: 12



Characteristics: 12

Bog ( BH015 )

Rule Reference: R000365 Description: Bog / all (area)


Label String: [BOC] "Bog"


C - 8

DN: 09-048 17 November 2009

Breakwater ( BB041 )

Rule Reference: R000366 Description: Breakwater / not covers and uncovers (area)


Label String: "Breakwater"

Characteristics: 12

Rule Reference: R000367 Description: Breakwater / covers and uncovers (area)



Characteristics: 12

Rule Reference: R000368 Description: Breakwater / not covers and uncovers (line)



Characteristics: 12

Rule Reference: R000369 Description: Breakwater / covers and uncovers (line)



Characteristics: 12

C - 9

DN: 09-048 17 November 2009

Bridge ( AQ040 )

Rule Reference: R000144 Description: Bridge / fixed, unknown, or not applicable (line)

Additional Labeling Criteria: Bridge symbol does not coalesce



Additional Labeling Criteria: Bridge symbol coalesces

Label String: "Coalescing bridges"

Characteristics: 12

Rule Reference: R000145 Description: Bridge / bascule, swing-bridge, lift-bridge, or retractable (line)






Characteristics: 12

Rule Reference: R000146 Description: Bridge / pedestrian (line)






Characteristics: 12

C - 10

DN: 09-048 17 November 2009

Building ( AL015 )

Rule Reference: R000026 Description: Building / generic (area)

Additional Labeling Criteria: (CEF = 1 or CEF = 2)

Label String: [NAM] [CEF]


Additional Labeling Criteria: (CFC = 1 or CFC = 2 or CFC = 3 or CFC = 4)

Label String: [NAM] [CFC]


Additional Labeling Criteria: (GFC = 1 or GFC = 3 or GFC = 4 or GFC = 6 or GFC = 8 or GFC = 11 or GFC = 12 or GFC = 13 or

GFC = 14)

Label String: [NAM] [GFC]


Additional Labeling Criteria: (ICF = 18)

Label String: [NAM] [ICF]


Additional Labeling Criteria: (MFC = 1)

Label String: [NAM] [MFC]


Additional Labeling Criteria: (PSF = 2 or PSF = 3 or PSF = 5 or PSF = 6 or PSF = 9 or PSF = 10 or PSF = 12 or PSF = 16)

Label String: [NAM] [PSF]


Additional Labeling Criteria: (UUC = 10)

Label String: [NAM] [UUC]


Rule Reference: R000027 Description: Building / destroyed (area)


Label String: "Destroyed"

Characteristics: 1

C - 11

DN: 09-048 17 November 2009

Building ( AL015 ) (continued)

Rule Reference: R000028 Description: Building / hospital / not destroyed (area)


Label String: [NAM]

Characteristics: 1

Rule Reference: R000029 Description: Building / not "not applicable" / not destroyed (area)


Label String: [NAM]

Characteristics: 1

Rule Reference: R000030 Description: Building / marabout, minaret, or mosque / not destroyed (area)

Additional Labeling Criteria: (HWT <> 5 and HWT <> 6)

Label String: [NAM]

Characteristics: 1

Additional Labeling Criteria: (HWT = 6)

Label String: "Minaret"

Characteristics: 1


Label String: "Marabout"

Characteristics: 1

Rule Reference: R000031 Description: Building / synagogue / not destroyed (area)


Label String: [NAM]

Characteristics: 1

Rule Reference: R000032 Description: Building / cathedral, chapel, church,reigious community, tabernacle, unknown or

other / not destroyed (area)


Label String: [NAM]

Characteristics: 1

C - 12

DN: 09-048 17 November 2009


Rule Reference: R000033 Description: Building / pagoda / not destroyed (area)


Label String: [NAM]

Characteristics: 1

Rule Reference: R000034 Description: Building / temple / not destroyed (area)


Label String: [NAM]

Characteristics: 1

Rule Reference: R000317 Description: Building / stupa / not destroyed (area)


Label String: [NAM]

Characteristics: 1

C - 13

DN: 09-048 17 November 2009


Rule Reference: R000219 Description: Building / generic (point)

Additional Labeling Criteria: (CEF = 1 or CEF = 2)

Label String: [NAM] [CEF]


Additional Labeling Criteria: (CFC = 1 or CFC = 2 or CFC = 3 or CFC = 4)

Label String: [NAM] [CFC]


Additional Labeling Criteria: (GFC = 1 or GFC = 3 or GFC = 4 or GFC = 6 or GFC = 8 or GFC = 11 or GFC = 12 or GFC = 13 or

GFC = 14)

Label String: [NAM] [GFC]


Additional Labeling Criteria: (ICF = 18)

Label String: [NAM] [ICF]


Additional Labeling Criteria: (MFC = 1)

Label String: [NAM] [MFC]


Additional Labeling Criteria: (PSF = 2 or PSF = 3 or PSF = 5 or PSF = 6 or PSF = 9 or PSF = 10 or PSF = 12 or PSF = 16)

Label String: [NAM] [PSF]


Additional Labeling Criteria: (UUC = 10)

Label String: [NAM] [UUC]


Rule Reference: R000220 Description: Building / single obstruction (point)


Label String: "Building/"[NAM]

[FUN]

[ZVH]

"("[HGT]")"


C - 14

DN: 09-048 17 November 2009


Rule Reference: R000221 Description: Building / hospital / not destroyed / non-obstruction (point)


Label String: [NAM]

Characteristics: 1

Rule Reference: R000222 Description: Building / not "not applicable" / not destroyed / non-obstruction (point)


Label String: [NAM]

Characteristics: 1

Rule Reference: R000223 Description: Building / railway station / not destroyed / accurate / non-obstruction (point)


Label String: [NAM] "Station"


Rule Reference: R000225 Description: Building / synagogue / not destroyed / non-obstruction (point)


Label String: [NAM]

Characteristics: 1

Rule Reference: R000226 Description: Building / cathedral, chapel, church,reigious community, tabernacle, unknown or

other / not destroyed / non-obstruction (point)


Label String: [NAM]

Characteristics: 1

Rule Reference: R000227 Description: Building / pagoda / not destroyed / non-obstruction (point)


Label String: [NAM]

Characteristics: 1

Rule Reference: R000228 Description: Building / stupa / not destroyed / non-obstruction (point)


Label String: [NAM]

Characteristics: 1

C - 15

DN: 09-048 17 November 2009


Rule Reference: R000229 Description: Building / minaret / not destroyed / non-obstruction (point)


Label String: "Minaret"

Characteristics: 1

Rule Reference: R000230 Description: Building / mosque / not destroyed / non-obstruction (point)


Label String: [NAM]

Characteristics: 1

Rule Reference: R000345 Description: Building / temple / not destroyed / non-obstruction (point)


Label String: [NAM]

Characteristics: 1

Rule Reference: R000358 Description: Building / destroyed / non-obstruction (point)

Additional Labeling Criteria: (FUN = 3)

Label String: "Destroyed"

Characteristics: 1

Rule Reference: R000424 Description: Building / railway station / not destroyed / approximate / non-obstruction (point)


Label String: [NAM] "Station"


Rule Reference: R000461 Description: Building / multiple obstructions (point)


Label String: "Building/"[NAM]

[FUN]

[ZVH]

"("[HGT]")"


C - 16

DN: 09-048 17 November 2009

Built-Up Area ( AL020 )

Rule Reference: R000286 Description: Built-Up Area / dense / fully functional (area)


Label String: [NAM]

Characteristics: 13

Rule Reference: R000287 Description: Built-Up Area / sparse, or unknown / fully functional (area)


Label String: [NAM]

Characteristics: 13

Rule Reference: R000288 Description: Built-Up Area / destroyed, or damaged (area)




Rule Reference: R000231 Description: Built-Up Area / all (point)

Additional Labeling Criteria: [ORD] = 0 or [ORD] = 5



Additional Labeling Criteria: [ORD] = 2












C - 17

DN: 09-048 17 November 2009

Cableway ( AT041 )

Rule Reference: R000161 Description: Cableway / unknown or other / non-obstruction (line)


Label String: "Aerial cableway"

Characteristics: 1

Rule Reference: R000162 Description: Cableway / recreational / non-obstruction (line)


Label String: "Ski lift"

Characteristics: 1

Rule Reference: R000163 Description: Cableway / transportation / non-obstruction (line)


Label String: "Tramway"

Characteristics: 1

Rule Reference: R000431 Description: Cableway / obstruction (line)


Label String: "Cableway"

[ZVH]

"("[HGT]")"


Camp-site ( AK060 )

Rule Reference: R000020 Description: Camp Site / all (area)


Label String: [NAM] "Campsite"


C - 18

DN: 09-048 17 November 2009

Canal ( BH020 )

Rule Reference: R000054 Description: Canal / perennial / not under construction (area)


Label String: [NAM] "Canal" [FUN]


Rule Reference: R000055 Description: Canal / non-perennial / not under construction (area)




Rule Reference: R000426 Description: Canal / under construction (area)


Label String: "Canal under construction"

Characteristics: 32

Rule Reference: R000172 Description: Canal / perennial (line)




Rule Reference: R000173 Description: Canal / non-perennial (line)




Cart Track ( AP010 )

Rule Reference: R000130 Description: Cart Track / all (line)

Additional Labeling Criteria: WTC = 3

Label String: "Winter only"

Characteristics: 1

Catalytic Cracker ( AC020 )

Rule Reference: R000361 Description: Catalytic Cracker / all (point)


Label String: "Catalytic cracker"

Characteristics: 1

C - 19

DN: 09-048 17 November 2009

Causeway ( AQ064 )

Rule Reference: R000147 Description: Causeway / all (line)


Label String: [NAM] "Causeway" [WLE]


Cave ( DB030 )

Rule Reference: R000274 Description: Cave / all (point)


Label String: [NAM] "Cave"


C - 20

DN: 09-048 17 November 2009

Cemetery ( AL030 )

Rule Reference: R000036 Description: Cemetery / islam (area)


Label String: [NAM] "Cemetery"


Rule Reference: R000037 Description: Cemetery / buddhism (area)




Rule Reference: R000038 Description: Cemetery / christian (area)




Rule Reference: R000040 Description: Cemetery / judaism (area)




Rule Reference: R000452 Description: Cemetery / unknown or other (area)


Label String: [NAM] "Cem"


Rule Reference: R000233 Description: Cemetery / christian (point)




Rule Reference: R000234 Description: Cemetery / buddhism (point)




C - 21

DN: 09-048 17 November 2009

Cemetery ( AL030 ) (continued)

Rule Reference: R000235 Description: Cemetery / islam (point)




Rule Reference: R000236 Description: Cemetery / judaism (point)




Rule Reference: R000486 Description: Cemetery / unknown or other religion (point)




Checkpoint ( AH070 )

Rule Reference: R000344 Description: Checkpoint / all (point)

Additional Labeling Criteria: ([NAM] <> "UNK") and ([NAM] is not null )

Label String: [NAM]

Characteristics: 1

Additional Labeling Criteria: ([NAM] = "UNK" or [NAM] is null )

Label String: "Checkpoint"

Characteristics: 1

Circular Irrigation System ( AJ010 )

Rule Reference: R000018 Description: Circular Irrigation System / all (area)


Label String: "Circular irrigation"

Characteristics: 1

C - 22

DN: 09-048 17 November 2009

Cleared Way ( EC040 )

Rule Reference: R000105 Description: Cleared Way / all (area)


Label String: "Firebreak"

Characteristics: 41

Communication Line ( AT060 )

Rule Reference: R000164 Description: Communication Line / non-obstruction (line)


Label String: "Tel"

Characteristics: 1

Rule Reference: R000454 Description: Communication Line / obstruction (line)


Label String: "Communication line"

[ZVH]

"("[HGT]")"


Communication Station ( AT050 )

Rule Reference: R000052 Description: Communication Station / all (area)


Label String: [NAM] [NST] "Station"


C - 23

DN: 09-048 17 November 2009

Communication Tower ( AT080 )

Rule Reference: R000257 Description: Communication Tower / non-obstruction (point)


Label String: "Tower"

Characteristics: 1

Rule Reference: R000258 Description: Communication Tower / single obstruction (point)


Label String: "Communication tower/"[NAM]

[FUN]

[ZVH]

"("[HGT]")"


Rule Reference: R000462 Description: Communication Tower / multiple obstructions (point)


Label String: "Communication tower/"[NAM]

[FUN]

[ZVH]

"("[HGT]")"


C - 24

DN: 09-048 17 November 2009

Control Tower ( AQ060 )

Rule Reference: R000251 Description: Control Tower / non-obstruction (point)


Label String: "Control tower"

Characteristics: 1

Rule Reference: R000252 Description: Control Tower / single obstruction (point)


Label String: "Control tower/"[NAM]

[FUN]

[ZVH]

"("[HGT]")"


Rule Reference: R000463 Description: Control Tower / multiple obstructions (point)


Label String: "Control tower/"[NAM]

[FUN]

[ZVH]

"("[HGT]")"


Conveyor ( AF020 )

Rule Reference: R000113 Description: Conveyor / all (line)


Label String: "Conveyor"

Characteristics: 1

C - 25

DN: 09-048 17 November 2009

Cooling Tower ( AF030 )

Rule Reference: R000206 Description: Cooling Tower / non-obstruction (point)


Label String: "Cooling tower"

Characteristics: 1

Rule Reference: R000207 Description: Cooling Tower / single obstruction (point)


Label String: "Cooling tower/"[NAM]

[FUN]

[ZVH]

"("[HGT]")"


Rule Reference: R000464 Description: Cooling Tower / multiple obstructions (point)


Label String: "Cooling tower/"[NAM]

[FUN]

[ZVH]

"("[HGT]")"


C - 26

DN: 09-048 17 November 2009

Crane ( AF040 )

Rule Reference: R000208 Description: Crane / single obstruction (point)


Label String: "Crane/"[NAM]

[FUN]

[ZVH]

"("[HGT]")"


Rule Reference: R000209 Description: Crane / non-obstruction (point)


Label String: "Crane"

Characteristics: 1

Rule Reference: R000465 Description: Crane / multiple obstructions (point)


Label String: "Crane/"[NAM]

[FUN]

[ZVH]

"("[HGT]")"


Crop Land ( EA010 )

Rule Reference: R000094 Description: Crop Land / dry crop (area)

Additional Labeling Criteria: (TXT = "Nursery")

Label String: "Nursery"

Characteristics: 1

C - 27

DN: 09-048 17 November 2009

Dam ( BI020 )

Rule Reference: R000321 Description: Dam / not soil (area)




Rule Reference: R000459 Description: Dam / soil (area)




Rule Reference: R000184 Description: Dam / unknown, or not applicable (line)


Label String: [NAM] [SMC] [FUN]


Rule Reference: R000428 Description: Dam / under construction, or fully functional / railway, road, road and railway, or

other (line)




Rule Reference: R000268 Description: Dam / non-obstruction (point)




Rule Reference: R000425 Description: Dam / single obstruction (point)


Label String: "Dam/"[NAM]

[FUN]

[ZVH]

"("[HGT]")"


C - 28

DN: 09-048 17 November 2009

Dam ( BI020 ) (continued)

Rule Reference: R000466 Description: Dam / multiple obstructions (point)


Label String: "Dam/"[NAM]

[FUN]

[ZVH]

"("[HGT]")"


Dish Aerial ( AT010 )

Rule Reference: R000255 Description: Dish Aerial / non-obstruction (point)


Label String: "Dish"

Characteristics: 1

Rule Reference: R000256 Description: Dish Aerial / single obstruction (point)


Label String: "Dish aerial/"[NAM]

[FUN]

[ZVH]

"("[HGT]")"


Rule Reference: R000467 Description: Dish Aerial / multiple obstructions (point)


Label String: "Dish aerial/"[NAM]

[FUN]

[ZVH]

"("[HGT]")"


C - 29

DN: 09-048 17 November 2009

Disposal Site ( AB000 )

Rule Reference: R000010 Description: Disposal Site / refuse (area)


Label String: "Landfill"

Characteristics: 1

Rule Reference: R000011 Description: Disposal Site / non-refuse (area)


Label String: [PBY] "Dump"


Ditch ( BH030 )

Rule Reference: R000056 Description: Ditch / perennial (area)


Label String: "Ditch"

Characteristics: 32

Rule Reference: R000453 Description: Ditch / non-perennial (area)


Label String: "Ditch"

Characteristics: 32

C - 30

DN: 09-048 17 November 2009

Elevation Contour ( Elevation Contour )

Rule Reference: R000289 Description: Elevation Contour / land index accurate (line)


Label String: [ZVH]

Characteristics: 20

Rule Reference: R000290 Description: Elevation Contour / snow/ice index accurate (line)


Label String: [ZVH]

Characteristics: 19

Rule Reference: R000297 Description: Elevation Contour / land depression index (line)


Label String: [ZVH]

Characteristics: 20

Rule Reference: R000298 Description: Elevation Contour / snow/ice depression index (line)


Label String: [ZVH]

Characteristics: 19

Rule Reference: R000301 Description: Elevation Contour / land mound index (line)


Label String: [ZVH]

Characteristics: 20

Rule Reference: R000433 Description: Elevation Contour / land index approximate (line)


Label String: [ZVH]

Characteristics: 20

Rule Reference: R000434 Description: Elevation Contour / snow/ice index approximate (line)


Label String: [ZVH]

Characteristics: 19

C - 31

DN: 09-048 17 November 2009

Embankment ( DB090 )

Rule Reference: R000083 Description: Embankment / greater than contour interval (area)


Label String: [NAM]

Characteristics: 1

Rule Reference: R000440 Description: Embankment / less than contour interval (area)


Label String: [NAM]

Characteristics: 1

Rule Reference: R000189 Description: Embankment / fill embankment / greater than contour interval (line)


Label String: [NAM]

Characteristics: 1

Rule Reference: R000429 Description: Embankment / dyke / railway, road, or road and railway (line)


Label String: [NAM]

Characteristics: 1

Rule Reference: R000430 Description: Embankment / dyke / not railway, not road, and not road and railway (line)


Label String: [NAM]

Characteristics: 1

Rule Reference: R000439 Description: Embankment / fill embankment / less than contour interval (line)


Label String: [NAM]

Characteristics: 1

C - 32

DN: 09-048 17 November 2009

Extraction Mine ( AA010 )

Rule Reference: R000001 Description: Extraction Mine / fully functional, or unknown / not peatery (area)


Label String: [NAM] [MIN] [PPO]


Rule Reference: R000002 Description: Extraction Mine / abandoned / not peatery (area)




Rule Reference: R000003 Description: Extraction Mine / peatery (area)


Label String: "Peat cuttings"

Characteristics: 2

Rule Reference: R000192 Description: Extraction Mine / fully functional, or unknown / not peatery (point)




Rule Reference: R000193 Description: Extraction Mine / abandonded / not peatery (point)




Rule Reference: R000341 Description: Extraction Mine / peatery (point)


Label String: "Peat cuttings"

Characteristics: 1

Fairground ( AK090 )

Rule Reference: R000363 Description: Fairground / all (area)


Label String: [NAM] "Fairground"


C - 33

DN: 09-048 17 November 2009

Ferry Crossing ( AQ070 )

Rule Reference: R000148 Description: Ferry Crossing / all (line)


Label String: [NAM] "Ferry" [FUN]


Rule Reference: R000253 Description: Ferry Crossing / all (point)


Label String: [NAM] "Ferry" [FUN]


Flare Pipe ( AF070 )

Rule Reference: R000210 Description: Flare Pipe / obstruction or offshore (point)


Label String: "Flare pipe/"[NAM]

[FUN]

[ZVH]

"("[HGT]")"


Rule Reference: R000343 Description: Flare Pipe / non-obstruction / not offshore (point)


Label String: "Flare pipe"

Characteristics: 1

Rule Reference: R000468 Description: Flare Pipe / multiple obstructions (point)


Label String: "Flare pipe/"[NAM]

[FUN]

[ZVH]

"("[HGT]")"


C - 34

DN: 09-048 17 November 2009

Fortification ( AH050 )

Rule Reference: R000017 Description: Fortification / all (area)


Label String: [NAM] "Fault"


Geologic Fault ( DB110 )

Rule Reference: R000190 Description: Geologic Fault / all (line)


Label String: [NAM] "Fault"


Geothermal Outlet ( DB115 )

Rule Reference: R000084 Description: Geothermal Outlet / all (area)


Label String: "Geothermal outlet"

Characteristics: 20

Golf Course ( AK100 )

Rule Reference: R000021 Description: Golf Course / all (area)


Label String: [NAM] "Golf course"


C - 35

DN: 09-048 17 November 2009

Grain Elevator ( AM030 )

Rule Reference: R000045 Description: Grain Elevator / all (area)


Label String: "Grain elevator"

Characteristics: 1

Rule Reference: R000243 Description: Grain Elevator / non-obstruction (point)


Label String: "Grain elevator"

Characteristics: 22

Rule Reference: R000244 Description: Grain Elevator / single obstruction (point)


Label String: "Grain elevator/"[NAM]

[ZVH]

"("[HGT]")"


Rule Reference: R000469 Description: Grain Elevator / multiple obstructions (point)


Label String: "Grain elevator/"[NAM]

[ZVH]

"("[HGT]")"


C - 36

DN: 09-048 17 November 2009

Grain Storage Structure ( AM020 )

Rule Reference: R000441 Description: Grain Storage Structure / single obstruction (point)


Label String: "Silo"

[ZVH]

"("[HGT]")"

[FUN]


Rule Reference: R000484 Description: Grain Storage Structure / multiple obstructions (point)


Label String: "Silo"

[ZVH]

"("[HGT]")"

[FUN]


Groin ( BB043 )

Rule Reference: R000373 Description: Groin / not covers and uncovers (area)


Label String: "Groin"

Characteristics: 12

Rule Reference: R000375 Description: Groin / not covers and uncovers (line)


Label String: "Groin"

Characteristics: 12

Harbour ( BB005 )

Rule Reference: R000377 Description: Harbour / all (area)


Label String: [NAM] [FHC]


C - 37

DN: 09-048 17 November 2009

Hazardous Rock ( BD130 )

Rule Reference: R000378 Description: Hazardous Rock / always dry (point)

Additional Labeling Criteria: SMC <> 24

Label String: [NAM]

Characteristics: 1

Additional Labeling Criteria: SMC = 24

Label String: [NAM] "Coral"


Rule Reference: R000379 Description: Hazardous Rock / not always dry (point)

Additional Labeling Criteria: SMC <> 24

Label String: [NAM]

Characteristics: 5

Additional Labeling Criteria: SMC = 24

Label String: [NAM] "Coral"


Heating Facility ( AD050 )

Rule Reference: R000380 Description: Heating Facility / all (area)


Label String: [NAM] "Heat plant"


Rule Reference: R000381 Description: Heating Facility / all (point)


Label String: [NAM] "Heat plant"


C - 38

DN: 09-048 17 November 2009

Helipad ( GB030 )

Rule Reference: R000350 Description: Helipad / non-hospital (point)


Label String: [NAM]

Characteristics: 29

Rule Reference: R000351 Description: Helipad / hospital (point)


Label String: [NAM]

Characteristics: 29

Heliport ( GB035 )

Rule Reference: R000110 Description: Heliport / all (area)




Holding Pen ( AJ030 )

Rule Reference: R000019 Description: Holding Pen / all (area)


Label String: "Holding pen"

Characteristics: 3

Ice Route ( AQ075 )

Rule Reference: R000412 Description: Ice Route / all (line)


Label String: "Ice route"

Characteristics: 1

International Date Line ( International Date Line )

Rule Reference: R000316 Description: International Date Line / all (line)


Label String: "International date line" "(Monday)"

"(Sunday)"


C - 39

DN: 09-048 17 November 2009

Island ( BA030 )

Rule Reference: R000053 Description: Island / all (area)


Label String: [NAM]

Characteristics: 3

Lake ( BH080 )

Rule Reference: R000058 Description: Lake / perennial (area)

Additional Labeling Criteria: (SCC <> 10)

Label String: [NAM]

Characteristics: 33

Additional Labeling Criteria: (SCC = 10)

Label String: [NAM] "Salt"


Rule Reference: R000059 Description: Lake / intermittent or unknown (area)





Label String: [NAM]

Characteristics: 33

Rule Reference: R000060 Description: Lake / dry (area)


Label String: [NAM]

Characteristics: 33




C - 40

DN: 09-048 17 November 2009

Launch Pad ( GB040 )

Rule Reference: R000413 Description: Launch Pad / all (point)


Label String: "Launch pad"

Characteristics: 13

Lighthouse ( BC050 )

Rule Reference: R000384 Description: Lighthouse / non-obstruction (point)


Label String: [NAM] "Lighthouse" [FUN]


Rule Reference: R000385 Description: Lighthouse / single obstruction (point)


Label String: "Lighthouse/"[NAM]

[FUN]

[ZVH]

"("[HGT]")"


Rule Reference: R000470 Description: Lighthouse / multiple obstructions (point)


Label String: "Lighthouse/"[NAM]

[FUN]

[ZVH]

"("[HGT]")"


C - 41

DN: 09-048 17 November 2009

Lock ( BI030 )

Rule Reference: R000073 Description: Lock / all (area)


Label String: [NAM] "Lock"


Rule Reference: R000339 Description: Lock / all (line)


Label String: "Lock"

Characteristics: 1

Rule Reference: R000269 Description: Lock / all (point)


Label String: "Lock"

Characteristics: 1

Marine Farm ( BH050 )

Rule Reference: R000386 Description: Marine Farm / all (area)


Label String: "Marine farm"

Characteristics: 16

Maritime Area ( Maritime Area )

Rule Reference: R000353 Description: Maritime Area / all (line)


Label String: [NM3] [TXT]

[NM4]


Maritime Signal Station ( BB155 )

Rule Reference: R000387 Description: Maritime Signal Station / all (point)


Label String: "Maritime signal station"

Characteristics: 1

C - 42

DN: 09-048 17 November 2009

Memorial Monument ( AL130 )

Rule Reference: R000238 Description: Memorial Monument / non-obstruction (point)


Label String: [NAM] [SSC]


Rule Reference: R000239 Description: Memorial Monument / single obstruction (point)


Label String: "Memorial monument/"[NAM]

[FUN]

[ZVH]

"("[HGT]")"


Rule Reference: R000471 Description: Memorial Monument / multiple obstructions (point)


Label String: "Memorial monument/"[NAM]

[FUN]

[ZVH]

"("[HGT]")"


C - 43

DN: 09-048 17 November 2009

Military Installation ( SU001 )

Rule Reference: R000352 Description: Military Installation / all (area)

Additional Labeling Criteria: NAM <> "UNK"

Label String: [NAM]

Characteristics: 1

Additional Labeling Criteria: NAM = "UNK"

Label String: "Military base"

Characteristics: 1

Rule Reference: R000284 Description: Military Installation / all (point)

Additional Labeling Criteria: NAM <> "UNK"

Label String: [NAM]

Characteristics: 13

Additional Labeling Criteria: NAM = "UNK"

Label String: "Military base"

Characteristics: 13

C - 44

DN: 09-048 17 November 2009

Mineral Pile ( AM040 )

Rule Reference: R000319 Description: Mineral Pile / all (area)


Label String: [PPO]

Characteristics: 1

Rule Reference: R000347 Description: Mineral Pile / single obstruction (point)


Label String: "Mineral pile/"[NAM]

[FUN]

[ZVH]

"("[HGT]")"


Rule Reference: R000348 Description: Mineral Pile / non-obstruction (point)


Label String: [PPO]

Characteristics: 12

Rule Reference: R000472 Description: Mineral Pile / multiple obstructions (point)


Label String: "Mineral pile/"[NAM]

[FUN]

[ZVH]

"("[HGT]")"


C - 45

DN: 09-048 17 November 2009

Mooring Mast ( AQ110 )

Rule Reference: R000388 Description: Mooring Mast / non-obstruction (point)


Label String: "Mooring mast"

Characteristics: 1

Rule Reference: R000389 Description: Mooring Mast / single obstruction (point)


Label String: "Mooring mast/"[NAM]

[FUN]

[ZVH]

"("[HGT]")"


Rule Reference: R000473 Description: Mooring Mast / multiple obstructions (point)


Label String: "Mooring mast/"[NAM]

[FUN]

[ZVH]

"("[HGT]")"


Moraine ( BJ020 )

Rule Reference: R000074 Description: Moraine / all (area)


Label String: "Moraine"

Characteristics: 1

Mountain Pass ( DB150 )

Rule Reference: R000276 Description: Mountain Pass / all (point)


Label String: [NAM] "Pass"


C - 46

DN: 09-048 17 November 2009

Named Location ( ZD040 )

Rule Reference: R000285 Description: Named Location / all (point)


Label String: [NAM]

Characteristics: 13

Natural Pool ( BH170 )

Rule Reference: R000264 Description: Natural Pool / perennial (point)


Label String: [SCC]

Characteristics: 16

Rule Reference: R000265 Description: Natural Pool / intermittent, dry, or unknown (point)


Label String: [SCC]

Characteristics: 16

C - 47

DN: 09-048 17 November 2009

Non-communication Tower ( AL240 )

Rule Reference: R000240 Description: Non-Communication Tower / non-obstruction (point)


Label String: "Tower"

Characteristics: 3

Rule Reference: R000241 Description: Non-Communication Tower / single obstruction (point)


Label String: "Non-communication tower/"[NAM]

[FUN]

[ZVH]

"("[HGT]")"


Rule Reference: R000474 Description: Non-Communication Tower / multiple obstructions (point)


Label String: "Non-communication tower/"[NAM]

[FUN]

[ZVH]

"("[HGT]")"


Oasis ( EC020 )

Rule Reference: R000099 Description: Oasis / all (area)


Label String: [NAM] "Oasis"


C - 48

DN: 09-048 17 November 2009

Offshore Platform ( BD110 )

Rule Reference: R000390 Description: Offshore Platform / non-obstruction (point)


Label String: "Offshore platform"

Characteristics: 1

Rule Reference: R000391 Description: Offshore Platform / single obstruction (point)


Label String: "Offshore platform/"[NAM]

[FUN]

[ZVH]

"("[HGT]")"


Rule Reference: R000475 Description: Offshore Platform / multiple obstructions (point)


Label String: "Offshore platform/"[NAM]

[FUN]

[ZVH]

"("[HGT]")"


Park ( AK120 )

Rule Reference: R000022 Description: Park / all (area)


Label String: [NAM]

Characteristics: 21

Particle Accelerator ( AL140 )

Rule Reference: R000392 Description: Particle Accelerator / all (area)


Label String: "Particle accelerator"

Characteristics: 1

C - 49

DN: 09-048 17 November 2009

Penstock ( BH110 )

Rule Reference: R000177 Description: Penstock / below ground surface (line)


Label String: "Penstock"

Characteristics: 16

Rule Reference: R000178 Description: Penstock / on surface, or unknown (line)



Characteristics: 16

Rule Reference: R000179 Description: Penstock / above surface (line)



Characteristics: 16

C - 50

DN: 09-048 17 November 2009

Pipeline ( AQ113 )

Rule Reference: R000149 Description: Pipeline / on waterbody bottom, on surface, or unknown / not water (line)

Additional Labeling Criteria: (PPO <> 0 and PPO <> 122 and PPO <> 999)

Label String: [PPO] "Pipeline" [FUN]


Additional Labeling Criteria: (PPO = 0 or PPO = 122 or PPO = 999)

Label String: "Pipeline" [FUN]


Rule Reference: R000150 Description: Pipeline / on waterbody bottom, on surface, or unknown / water (line)



Characteristics: 14,14.14




Rule Reference: R000151 Description: Pipeline / below waterbody bottom, or below surface / not water (line)







Rule Reference: R000152 Description: Pipeline / below waterbody bottom, or below surface / water (line)







C - 51

DN: 09-048 17 November 2009

Pipeline ( AQ113 ) (continued)

Rule Reference: R000153 Description: Pipeline / above surface, or above waterbody bottom / not water (line)


Label String: [PPO] "pipeline" [FUN]





Rule Reference: R000154 Description: Pipeline / above surface, or above waterbody bottom / water (line)







Power Line ( AT030 )

Rule Reference: R000159 Description: Power Line / normal, or unknown (line)

Additional Labeling Criteria: ACC = 2

Label String: [ACC]

Characteristics: 1

Rule Reference: R000160 Description: Power Line / mountain, or water catenary (line)

Additional Labeling Criteria: ACC = 2

Label String: [ACC]

Characteristics: 1

C - 52

DN: 09-048 17 November 2009

Power Station ( AD010 )

Rule Reference: R000015 Description: Power Station / all (area)


Label String: [NAM] [PPC] "Power plant"


Rule Reference: R000202 Description: Power Station / non-obstruction (point)


Label String: [NAM] [PPC] "Power plant"


Rule Reference: R000442 Description: Power Station / single obstruction (point)


Label String: "Power plant" [NAM] [PPC]

[ZVH]

[HGT]

[FUN]

Characteristics: 15,15,15,15,15,15

Power Substation ( AD030 )

Rule Reference: R000016 Description: Power Substation / all (area)


Label String: "Transformer substation"

Characteristics: 1

Rule Reference: R000342 Description: Power Substation / all (point)


Label String: "Transformer substation"

Characteristics: 1

C - 53

DN: 09-048 17 November 2009

Processing Facility ( AC000 )

Rule Reference: R000013 Description: Processing Facility / all (area)

Additional Labeling Criteria: (PPO <> 16 and PPO <> 75 and PPO <> 136 and PPO <> 137)

Label String: [NAM] [PPO] "Plant"


Additional Labeling Criteria: (PPO = 16 or PPO = 75 or PPO = 136 or PPO = 137)

Label String: [PPO] "Refinery"


Rule Reference: R000201 Description: Processing Facility / all (point)

Additional Labeling Criteria: (PRO <> 16 and PRO <> 75 and PRO <> 136 and PRO <> 137)

Label String: [NAM] [PPO] "Plant"


Additional Labeling Criteria: (PRO = 16 or PRO = 75 or PRO = 136 or PRO = 137)

Label String: [PPO] "Refinery"


Public Square ( AL170 )

Rule Reference: R000041 Description: Public Square / all (area)


Label String: [NAM]

Characteristics: 1

Pumping Station ( AQ116 )

Rule Reference: R000049 Description: Pumping Station / all (area)


Label String: "Pumping station"

Characteristics: 1

Rule Reference: R000254 Description: Pumping Station / all (point)


Label String: "Pumping station"

Characteristics: 1

C - 54

DN: 09-048 17 November 2009

Quarry ( AA012 )

Rule Reference: R000008 Description: Quarry / fully functional, or unknown (area)


Label String: [NAM] [PPO]


Rule Reference: R000009 Description: Quarry / abandoned (area)




Rule Reference: R000194 Description: Quarry / fully functional, or unknown (point)




Rule Reference: R000195 Description: Quarry / abandonded (point)




Racetrack ( AK130 )

Rule Reference: R000114 Description: Racetrack / all (line)


Label String: [NAM] "Race track"


C - 55

DN: 09-048 17 November 2009

Radar Station ( AT045 )

Rule Reference: R000393 Description: Radar Station / non-obstruction (point)


Label String: [NAM] "Radar station"


Rule Reference: R000409 Description: Radar Station / single obstruction (point)


Label String: "Radar station/"[NAM]

[FUN]

[ZVH]

"("[HGT]")"


Rule Reference: R000476 Description: Radar Station / multiple obstructions (point)


Label String: "Radar station/"[NAM]

[FUN]

[ZVH]

"("[HGT]")"


C - 56

DN: 09-048 17 November 2009

Railway ( AN010 )

Rule Reference: R000117 Description: Railway / operational, standard, non-electric (line)

Additional Labeling Criteria: RGC = 1 and (LOC <> 0 and LOC <> 44)

Label String: [NAM] [RGC] [LOC]


Additional Labeling Criteria: RGC = 1 and (LOC = 0 or LOC = 44)

Label String: [NAM] [RGC]


Additional Labeling Criteria: RGC <> 1 and (LOC <> 0 and LOC <> 44)

Label String: [NAM] [LOC]


Additional Labeling Criteria: RGC <> 1 and (LOC = 0 or LOC = 44)

Label String: [NAM]

Characteristics: 27

Rule Reference: R000118 Description: Railway / carline, or funicular (line)

Additional Labeling Criteria: (RRC = 15)

Label String: "Inclined railway"

Characteristics: 27

Additional Labeling Criteria: (RRC = 2) and (LOC <> 0 and LOC <> 44)

Label String: [NAM] [FUN] [LOC]


Additional Labeling Criteria: (RRC = 2) and (LOC = 0 or LOC = 44)



C - 57

DN: 09-048 17 November 2009

Railway ( AN010 ) (continued)

Rule Reference: R000119 Description: Railway / operational, standard, electric (line)











Label String: [NAM]

Characteristics: 27

Rule Reference: R000120 Description: Railway / operational, narrow, electric (line)

Additional Labeling Criteria: (LOC <> 0 and LOC <> 44)

Label String: [NAM] [GAW] “Metres” [LOC]


Additional Labeling Criteria: (LOC = 0 or LOC = 44)

Label String: [NAM] [GAW] “Metres”


C - 58

DN: 09-048 17 November 2009


Rule Reference: R000121 Description: Railway / non-operational, standard, non-electric (line)


Label String: [NAM] [RGC] [FUN] [LOC]



Label String: [NAM] [RGC] [FUN]








Rule Reference: R000122 Description: Railway / non-operational, narrow, non-electric (line)


Label String: [NAM] [GAW] “Metres” [FUN] [LOC]



Label String: [NAM] [GAW] “Metres” [FUN]


C - 59

DN: 09-048 17 November 2009


Rule Reference: R000123 Description: Railway / non-operational, standard, electric (line)













Rule Reference: R000124 Description: Railway / non-operational, narrow, electric (line)







Rule Reference: R000125 Description: Railway / operational, narrow, non-electric (line)







C - 60

DN: 09-048 17 November 2009


Rule Reference: R000334 Description: Railway / in road (line)


Label String: "Railway in road"

Characteristics: 10

Rule Reference: R000335 Description: Railway / dismantled (line)


Label String: "Dismantled railway"

Characteristics: 10

C - 61

DN: 09-048 17 November 2009


Rule Reference: R000444 Description: Railway / operational, double standard, non-electric (line)

Additional Labeling Criteria: (RTA = 2) and (RGC = 1) and (LOC <> 0 and LOC <> 44)



Additional Labeling Criteria: (RTA = 2) and (RGC = 1) and (LOC = 0 or LOC = 44)



Additional Labeling Criteria: (RTA = 2) and (RGC <> 1) and (LOC <> 0 and LOC <> 44)



Additional Labeling Criteria: (RTA = 2) and (RGC <> 1) and (LOC = 0 or LOC = 44)

Label String: [NAM]

Characteristics: 27


Label String: [NAM] [RGC] [LTN] "Tracks" [LOC]



Label String: [NAM] [RGC] [LTN] "Tracks"



Label String: [NAM] [LTN] "Tracks" [LOC]



Label String: [NAM] [LTN] "Tracks"


C - 62

DN: 09-048 17 November 2009


Rule Reference: R000445 Description: Railway / operational, double standard, electric (line)











Label String: [NAM]

Characteristics: 27


Label String: [NAM] [RGC] [LTN] "Tracks" [LOC]



Label String: [NAM] [RGC] [LTN] "Tracks"



Label String: [NAM] [LTN] "Tracks" [LOC]



Label String: [NAM] [LTN] "Tracks"


C - 63

DN: 09-048 17 November 2009


Rule Reference: R000446 Description: Railway / operational, double narrow, electric (line)

Additional Labeling Criteria: (RTA = 2) and (LOC <> 0 and LOC <> 44)



Additional Labeling Criteria: (RTA = 2) and (LOC = 0 or LOC = 44)




Label String: [NAM] [GAW] “Metres” [LTN] "Tracks" [LOC]



Label String: [NAM] [GAW] “Metres” [LTN] "Tracks"


C - 64

DN: 09-048 17 November 2009


Rule Reference: R000447 Description: Railway / non-operational, double standard, non-electric (line)














Label String: [NAM] [RGC] [LTN] "Tracks" [FUN] [LOC]



Label String: [NAM] [RGC] [LTN] "Tracks" [FUN]



Label String: [NAM] [LTN] "Tracks" [FUN] [LOC]



Label String: [NAM] [LTN] "Tracks" [FUN]


C - 65

DN: 09-048 17 November 2009


Rule Reference: R000448 Description: Railway / non-operational, double narrow, non-electric (line)








Label String: [NAM] [GAW] “Metres” [LTN] "Tracks" [FUN] [LOC]

Characteristics: 27,27,27,27,28,27,27


Label String: [NAM] [GAW] “Metres” [LTN] "Tracks" [FUN]


C - 66

DN: 09-048 17 November 2009


Rule Reference: R000449 Description: Railway / non-operational, double standard, electric (line)














Label String: [NAM] [RGC] [LTN] "Tracks" [FUN] [LOC]



Label String: [NAM] [RGC] [LTN] "Tracks" [FUN]



Label String: [NAM] [LTN] "Tracks" [FUN] [LOC]



Label String: [NAM] [LTN] "Tracks" [FUN]


C - 67

DN: 09-048 17 November 2009


Rule Reference: R000450 Description: Railway / non-operational, double narrow, electric (line)








Label String: [NAM] [GAW] “Metres” [LTN] "Tracks" [FUN] [LOC]

Characteristics: 27,27,27,27,28,27,27


Label String: [NAM] [GAW] “Metres” [LTN] "Tracks" [FUN]


Rule Reference: R000451 Description: Railway / operational, double narrow, non-electric (line)








Label String: [NAM] [GAW] “Metres” [LTN] "Tracks" [LOC]



Label String: [NAM] [GAW] “Metres” [LTN] "Tracks"


C - 68

DN: 09-048 17 November 2009

Railway Sidetrack ( AN050 )

Rule Reference: R000129 Description: Railway Siding-Spur / standard / electric (line)

Additional Labeling Criteria: (RSA = 0 or RSA = 1)

Label String: [RGC]

Characteristics: 27

Rule Reference: R000336 Description: Railway Siding-Spur / standard / non-electric (line)

Additional Labeling Criteria: (RSA = 0 or RSA = 1)

Label String: [RGC]

Characteristics: 27

Railway Yard ( AN060 )

Rule Reference: R000048 Description: Railway Yard / all (area)


Label String: [FUN]

Characteristics: 27

Rapids ( BH120 )

Rule Reference: R000064 Description: Rapids / all (area)


Label String: "Rapids"

Characteristics: 35

Rule Reference: R000180 Description: Rapids / all (line)



Characteristics: 16

Rule Reference: R000261 Description: Rapids / all (point)



Characteristics: 16

C - 69

DN: 09-048 17 November 2009

Recreational Pier ( AK190 )

Rule Reference: R000394 Description: Recreational Pier / all (area)



Characteristics: 12

Rule Reference: R000395 Description: Recreational Pier /all (line)



Characteristics: 1

Recycling Site ( AB010 )

Rule Reference: R000012 Description: Recycling Site / all (area)


Label String: "Scrap yard"

Characteristics: 1

Reservoir ( BH130 )

Rule Reference: R000066 Description: Reservoir / under construction (area)


Label String: [NAM] "Under construction"


Rule Reference: R000067 Description: Reservoir / fully functional, or unknown (area)


Label String: [NAM]

Characteristics: 7

Rice Field ( BH135 )

Rule Reference: R000068 Description: Rice Field / terraced (area)


Label String: "Terraces"

Characteristics: 8

C - 70

DN: 09-048 17 November 2009

Rig ( AA040 )

Rule Reference: R000196 Description: Rig / non-obstruction (point)


Label String: "Rig"

Characteristics: 1

Rule Reference: R000197 Description: Rig / single obstruction (point)


Label String: "Rig/"[NAM]

[FUN]

[ZVH]

"("[HGT]")"


Rule Reference: R000477 Description: Rig / multiple obstructions (point)


Label String: "Rig/"[NAM]

[FUN]

[ZVH]

"("[HGT]")"


C - 71

DN: 09-048 17 November 2009

River ( BH140 )

Rule Reference: R000070 Description: River / perennial (area)


Label String: [NAM]

Characteristics: 37

Rule Reference: R000071 Description: River / non-perennial (area)


Label String: [NAM]

Characteristics: 37

Rule Reference: R000181 Description: River / perennial (line)


Label String: [NAM]

Characteristics: 16

Rule Reference: R000182 Description: River / non-perennial (line)


Label String: [NAM]

Characteristics: 16

C - 72

DN: 09-048 17 November 2009

Road ( AP030 )

Rule Reference: R000132 Description: Road / fully functional / no median / single lane / paved / all weather (line)




Rule Reference: R000133 Description: Road / fully functional / no median / 2 or more lanes / paved / all weather (line)


Label String: [NAM] [LTN] "Lanes" [LOC]


Rule Reference: R000135 Description: Road / fully functional / no median / single lane / unpaved / all weather (line)


Label String: [NAM]

Characteristics: 27

Rule Reference: R000136 Description: Road / fully functional / no median / 2 or more lanes / unpaved / all weather

(line)


Label String: [NAM] [LTN] "Lanes"


Rule Reference: R000137 Description: Road / under construction / no median / single lane / paved / all weather (line)


Label String: "Under construction" [LOC]


Rule Reference: R000138 Description: Road / fairweather (line)


Label String: [FUN]

Characteristics: 27

Rule Reference: R000139 Description: Road / under construction / median / 2 or more lanes / paved / all weather (line)


Label String: "Under construction" [LTN] "Lanes dual-divided" [LOC]


C - 73

DN: 09-048 17 November 2009

Road ( AP030 ) (continued)

Rule Reference: R000140 Description: Road / under construction / no median / 2 or more lanes / paved / all weather

(line)


Label String: "Under construction" [LTN] [LOC]


Rule Reference: R000141 Description: Road / under construction / no median / single lane / unpaved / all weather (line)


Label String: "Under construction"

Characteristics: 27

Rule Reference: R000142 Description: Road / under construction / no median / 2 or more lanes / unpaved / all weather

(line)


Label String: "Under construction" [LTN] "Lanes"


Rule Reference: R000338 Description: Road / fully functional / median / 2 or more lanes / paved / all weather (line)


Label String: [NAM] [LTN] "Lanes dual-divided" [LOC]


Roadside Rest Area ( AQ135 )

Rule Reference: R000050 Description: Roadside Rest Area / all (area)


Label String: "Services"

Characteristics: 1

Ruins ( AL200 )

Rule Reference: R000042 Description: Ruins / all (area)


Label String: "Ruins"

Characteristics: 3

C - 74

DN: 09-048 17 November 2009

Runway ( GB055 )

Rule Reference: R000111 Description: Runway / all (area)


Label String: [RST] [ZVA] [FUN]


Salt Evaporator ( BH155 )

Rule Reference: R000320 Description: Salt Evaporator / all (area)


Label String: "Salt evaporator"

Characteristics: 16

Sand Dunes ( DB170 )

Rule Reference: R000086 Description: Sand Dunes / unknown (area)


Label String: "Dunes"

Characteristics: 2

Seaplane Base ( GB065 )

Rule Reference: R000414 Description: Seaplane Base / all (point)


Label String: [FUN]

Characteristics: 24

Settlement ( AL105 )

Rule Reference: R000318 Description: Settlement / all (area)


Label String: [NAM]

Characteristics: 1

Rule Reference: R000237 Description: Settlement / all (point)


Label String: [NAM]

Characteristics: 1

C - 75

DN: 09-048 17 November 2009

Settling Pond ( AC030 )

Rule Reference: R000014 Description: Settling Pond / all (area)


Label String: "Sewage disposal bed"

Characteristics: 1

Slipway ( BB240 )

Rule Reference: R000397 Description: Slipway / not covers and uncovers (area)


Label String: "Slipway"

Characteristics: 1

Rule Reference: R000398 Description: Slipway / covers and uncovers (area)


Label String: "Slipway"

Characteristics: 14

Sluice Gate ( BI040 )

Rule Reference: R000185 Description: Sluice Gate / all (line)


Label String: "Sluice gate"

Characteristics: 1

Rule Reference: R000270 Description: Sluice Gate / all (point)


Label String: "Sluice gate"

Characteristics: 1

C - 76

DN: 09-048 17 November 2009

Smokestack ( AF010 )

Rule Reference: R000203 Description: Smokestack / non-obstruction (point)


Label String: "Smokestack"

Characteristics: 1

Rule Reference: R000204 Description: Smokestack / single obstruction (point)


Label String: "Smokestack/"[NAM]

[FUN]

[ZVH]

"("[HGT]")"


Rule Reference: R000478 Description: Smokestack / multiple obstructions (point)


Label String: "Smokestack/"[NAM]

[FUN]

[ZVH]

"("[HGT]")"


Snow Field and/or Ice-Field ( BJ100 )

Rule Reference: R000076 Description: Snow Field and/or Ice-Field / all (area)


Label String: "Snow/Ice"

Characteristics: 38

C - 77

DN: 09-048 17 November 2009

Soil Surface Region ( DA010 )

Rule Reference: R000078 Description: Soil Surface Region / large / boulders, lava, loess, mud, oil, rock, frozen water,

soil, evaporite, ice, snow, limestone, unknown, or other (area)

Additional Labeling Criteria: (SMC <> 0 and SMC <> 999)

Label String: [SMC]

Characteristics: 8

Additional Labeling Criteria: (SMC = 0 or SMC = 999) and (TXT is not NULL)

Label String: [TXT]

Characteristics: 8

Additional Labeling Criteria: (SMC = 0 or SMC = 999) and (TXT is NULL)

Label String: "Surface material undetermined"

Characteristics: 8

Rule Reference: R000079 Description: Soil Surface Region / small / boulders, lava, loess, mud, oil, rock, frozen water,

soil, evaporite, ice, snow, limestone, unknown, or other (area)

Additional Labeling Criteria: (SMC <> 0 and SMC <> 999)

Label String: [SMC]

Characteristics: 9

Additional Labeling Criteria: (SMC = 0 or SMC = 999) and (TXT is not NULL)

Label String: [TXT]

Characteristics: 9

Rule Reference: R000080 Description: Soil Surface Region / gravel, or sand and gravel (area)


Label String: [SMC]

Characteristics: 9

Rule Reference: R000081 Description: Soil Surface Region / sand (area)


Label String: [SMC]

Characteristics: 9

C - 78

DN: 09-048 17 November 2009

Soil Surface Region ( DA010 ) (continued)

Rule Reference: R000082 Description: Soil Surface Region / sand and boulders, or sand and mud (area)


Label String: [SMC]

Characteristics: 10

Solar Panel ( AD020 )

Rule Reference: R000362 Description: Solar Panel / all (point)


Label String: "Solar panel"

Characteristics: 1

C - 79

DN: 09-048 17 November 2009

Spot Elevation ( Spot Elevation )

Rule Reference: R000307 Description: Spot Elevation / accurate (point)

Additional Labeling Criteria: (Elevation Surface Category = Land) and (Elevation Accuracy Category = Accurate)

Label String: [ZVH]

Characteristics: 18

Additional Labeling Criteria: (Elevation Surface Category = Land) and (Elevation Accuracy Category = Approximate)

Label String: [ZVH] "±"


Additional Labeling Criteria: (Elevation Surface Category = Snow Field and/or Ice Field) and (Elevation Accuracy Category =

Accurate)

Label String: [ZVH]

Characteristics: 17


Approximate)



Rule Reference: R000443 Description: Spot Elevation / approximate (point)

Additional Labeling Criteria: (Elevation Surface Category = Land) and (Elevation Accuracy Category = Accurate)

Label String: [ZVH]

Characteristics: 18

Additional Labeling Criteria: (Elevation Surface Category = Land) and (Elevation Accuracy Category = Approximate)




Accurate)

Label String: [ZVH]

Characteristics: 17


Approximate)



C - 80

DN: 09-048 17 November 2009

Stadium ( AK160 )

Rule Reference: R000023 Description: Stadium / all (area)


Label String: [NAM] "Stadium"


Rule Reference: R000216 Description: Stadium / non-obstruction (point)


Label String: "Stadium" [FUN]


Rule Reference: R000217 Description: Stadium / single obstruction (point)


Label String: "Stadium/"[NAM]

[FUN]

[ZVH]

"("[HGT]")"


Rule Reference: R000479 Description: Stadium / multiple obstructions (point)


Label String: "Stadium/"[NAM]

[FUN]

[ZVH]

"("[HGT]")"


Storage Depot ( AM010 )

Rule Reference: R000043 Description: Storage Depot / all (area)


Label String: [LOC] "Storage depot"


C - 81

DN: 09-048 17 November 2009

Storage Tank ( AM070 )

Rule Reference: R000047 Description: Storage Tank / all (area)


Label String: [PPO] [LOC]


Rule Reference: R000246 Description: Storage Tank / non-obstruction (point)


Label String: [PPO] "Tank" [FUN]


Rule Reference: R000247 Description: Storage Tank / single obstruction (point)


Label String: "Storage tank/"[NAM]

[FUN]

[ZVH]

"("[HGT]")"


Rule Reference: R000480 Description: Storage Tank / multiple obstructions (point)


Label String: "Storage tank/"[NAM]

[FUN]

[ZVH]

"("[HGT]")"


Structural Pile ( BD100 )

Rule Reference: R000400 Description: Structural Pile / all (area)


Label String: "Piles"

Characteristics: 12

Rule Reference: R000401 Description: Structural Pile / all (point)


Label String: "Pile"

Characteristics: 12

C - 82

DN: 09-048 17 November 2009

Surface Bunker ( AM060 )

Rule Reference: R000046 Description: Surface Bunker / all (area)


Label String: [PPO] "Storage"


Rule Reference: R000245 Description: Surface Bunker / all (point)


Label String: [PPO] "Storage"


Test Site ( FA100 )

Rule Reference: R000402 Description: Test Site / all (area)


Label String: "Test site"

Characteristics: 1

Tidal Water ( BA040 )

Rule Reference: R000403 Description: Tidal Water / all (area)


Label String: [NAM]

Characteristics: 14

Trail ( AP050 )

Rule Reference: R000143 Description: Trail / all (line)

Additional Labeling Criteria: (WTC = 3)

Label String: "Winter only"

Characteristics: 10

C - 83

DN: 09-048 17 November 2009

Training Wall ( BB140 )

Rule Reference: R000404 Description: Training Wall / all (area)


Label String: "Jetty"

Characteristics: 12

Rule Reference: R000405 Description: Training Wall / all (line)


Label String: "Jetty"

Characteristics: 12

Transportation Station ( AQ125 )

Rule Reference: R000406 Description: Transportation Station / all (area)


Label String: "Stopping place"

Characteristics: 1

Rule Reference: R000421 Description: Transportation Station / all (point)


Label String: "Stopping place"

Characteristics: 1

Tundra ( BJ110 )

Rule Reference: R000407 Description: Tundra / all (area)


Label String: "Tundra"

Characteristics: 39

C - 84

DN: 09-048 17 November 2009

Tunnel ( AQ130 )

Rule Reference: R000155 Description: Tunnel / pedestrian, railway, road and railway, unknown, or other (line)


Label String: [NAM] "Tunnel"


Rule Reference: R000156 Description: Tunnel / aqueduct (line)




Rule Reference: R000157 Description: Tunnel / canal (line)




Rule Reference: R000158 Description: Tunnel / road (line)




Vehicle Lot ( AQ140 )

Rule Reference: R000051 Description: Vehicle Lot / all (area)


Label String: "Parking area"

Characteristics: 1

Void Collection Area ( ZD020 )

Rule Reference: R000408 Description: Void Collection Area / all (area)


Label String: "Limits of reliable information"

Characteristics: 40

C - 85

DN: 09-048 17 November 2009

Volcano ( DB180 )

Rule Reference: R000093 Description: Volcano / all (area)


Label String: [NAM]

Characteristics: 40

Rule Reference: R000278 Description: Volcano / all (point)


Label String: [NAM]

Characteristics: 1

Wall ( AL260 )

Rule Reference: R000116 Description: Wall / all (line)


Label String: "Wall"

Characteristics: 1

Water Intake Tower ( BI050 )

Rule Reference: R000271 Description: Water Intake Tower / all (point)


Label String: "Water intake tower"

Characteristics: 1

C - 86

DN: 09-048 17 November 2009

Water Tower ( AM080 )

Rule Reference: R000248 Description: Water Tower / non-obstruction (point)


Label String: "Water tower"

Characteristics: 12

Rule Reference: R000249 Description: Water Tower / single obstruction (point)


Label String: "Water tower/"[NAM]

[FUN]

[ZVH]

"("[HGT]")"


Rule Reference: R000481 Description: Water Tower / multiple obstructions (point)


Label String: "Water tower/"[NAM]

[FUN]

[ZVH]

"("[HGT]")"


Water Treatment Bed ( BH040 )

Rule Reference: R000057 Description: Water Treatment Bed / all (area)


Label String: "Water treatment bed"

Characteristics: 16

C - 87

DN: 09-048 17 November 2009

Waterfall ( BH180 )

Rule Reference: R000183 Description: Waterfall / all (line)


Label String: [NAM] "Falls"


Rule Reference: R000266 Description: Waterfall / all (point)


Label String: [NAM] "Falls"


Well ( AA050 )

Rule Reference: R000198 Description: Well / not water (point)


Label String: [PPO] [FUN]


Rule Reference: R000199 Description: Well / perennial / water (point)


Label String: [NAM] [WFT] [SCC] [FUN]


Rule Reference: R000200 Description: Well / not perennial / water (point)


Label String: [NAM] [WFT] [SCC] [FUN]


C - 88

DN: 09-048 17 November 2009

Windmill ( AJ050 )

Rule Reference: R000212 Description: Windmill / non-obstruction (point)


Label String: "Windmill"

Characteristics: 1

Rule Reference: R000213 Description: Windmill / single obstruction (point)


Label String: "Windmill/"[NAM]

[FUN]

[ZVH]

"("[HGT]")"


Rule Reference: R000482 Description: Windmill / multiple obstructions (point)


Label String: "Windmill/"[NAM]

[FUN]

[ZVH]

"("[HGT]")"


C - 89

DN: 09-048 17 November 2009

Windmotor ( AJ051 )

Rule Reference: R000214 Description: Windmotor / non-obstruction (point)


Label String: "Windmotor"

Characteristics: 1

Rule Reference: R000215 Description: Windmotor / single obstruction (point)


Label String: "Windmotor/"[NAM]

[FUN]

[ZVH]

"("[HGT]")"


Rule Reference: R000483 Description: Windmotor / multiple obstructions (point)


Label String: "Windmotor/"[NAM]

[FUN]

[ZVH]

"("[HGT]")"


C - 90

DN: 09-048 17 November 2009

Wood ( EC030 )

Rule Reference: R000100 Description: Wood / canopy cover >= 51 / coniferous / casuarina, palm, filao, cypress,

eucalyptus, or other (area)


Label String: [NAM]

Characteristics: 40

Rule Reference: R000101 Description: Wood / canopy cover >= 51 / deciduous (area)


Label String: [NAM]

Characteristics: 40

Rule Reference: R000102 Description: Wood / canopy cover >= 51 / mixed (area)


Label String: [NAM]

Characteristics: 40

Rule Reference: R000103 Description: Wood / coniferous / mangrove (area)


Label String: [NAM]

Characteristics: 40

Rule Reference: R000104 Description: Wood / coniferous / nipa (area)


Label String: [NAM]

Characteristics: 40

Rule Reference: R000333 Description: Wood / canopy cover >= 25 and < 51 / coniferous / not mangrove and not nipa

(area)


Label String: [NAM]

Characteristics: 40

C - 91

DN: 09-048 17 November 2009

Zoo ( AK180 )

Rule Reference: R000024 Description: Zoo / all (area)


Label String: [NAM] "Zoo"


C - 92

DN: 09-048 17 November 2009

D-1

Annex D – Text Characteristics (normative)


The Text Characteristics associated with the label information provided in Annex C is detailed in this Annex. The Characteristic ID provides the link to Annex C Label Information. The colour token name provides the link to Annex B Colour information.


Text

Characteristic # Colour Token Font Style Bold Italics Underline Font Size Case

DN: 09-048 17 November 2009

1 Black Condensed 6 Mixed case

2 Black Regular 6-12 Mixed case

3 Black Condensed 6-16 Mixed case

4 Black Condensed Bold 8-14 Mixed case

5 Black Condensed Italics 6 Mixed case

6 Black Condensed Italics 6-12 Mixed case



9 Black Light Condensed Italics 6-16 Mixed case

10 Black Light Condensed Italics 6 Mixed case


12 Black Regular 6 Mixed case


14 Cyan Condensed 6 Mixed case

15 Blue072 Condensed 6 Mixed case

16 Cyan Condensed Italics 6 Mixed case

17 Cyan Regular 6-10 Lower case

18 Black Regular 6-10 Lower case

19 Cyan Condensed Italics 7 Lower case

20 Dk-Brown1815 Condensed Italics 7 Lower case

21 Black Condensed 8 Upper case

22 Black Condensed 6 Lower case

23 Cyan Condensed 6 Lower case

24 Blue072 Condensed 7 Mixed case

25 Black Condensed 6-16 Lower case

26 Blue072 Condensed 6 Lower case

27 Black Light Condensed Italics 6 Upper case

28 Black Light Condensed Italics 6 Lower case

29 Blue072 Condensed 7 Upper case

30 Cyan Regular 6 Mixed case

31 Cyan Condensed Italics 6-12 Upper case

32 Cyan Condensed Italics 6-12 Mixed case



35 Black Regular Italics 6 Mixed case

36 Black Condensed Italics 6-20 Upper case



39 Black Condensed Italics 6-16 Upper case

D - 2

Text

Characteristic # Colour Token Font Style Bold Italics Underline Font Size Case

DN: 09-048 17 November 2009

40 Black Condensed 6-16 Upper case



45 Black Light Condensed 6 Mixed case

46 Blue072 Condensed Bold 6 Mixed case

47 Black Condensed Bold 14 Upper case

48 Black Condensed Bold 10 Upper case

49 Black Condensed Bold 10 Mixed case


51 Dk-Brown1815 Condensed 6 Mixed case

D - 3

DN: 09-048 17 November 2009

E-1

Annex E – Area Elements

Area Elements

Each of the area elements used in Annex A Symbols have been listed only one time in this Annex.

Area Elements

DN: 09-048 17 November 2009

Area - Complex

A00037

Element Name: Woodland-Evergreen Colour Token: Green362-31

Description: Green362-31_ScreenFill (area fill) coincident with Green362_EvergreenTreeFill (area pattern)

Miscellaneous Note: The two area elements are combined as one symbol

Area Pattern 1: Area Pattern 2: Green362_EvergreenTreeFill

Name: Green362-31_ScreenFill

Reference: A00009

Type: Area - Fill Name: Green362_EvergreenTreeFill

Reference: A00012

Type: Area - Pattern

A00038

Element Name: Woodland-Deciduous Colour Token: Green362-31

Description: Green362-31_ScreenFill (area fill) coincident with Green362_DeciduousTreeFill (area pattern)


Area Pattern 1: Area Pattern 2: Green362_DeciduousTreeFill


Reference: A00009

Type: Area - Fill Name: Green362_DeciduousTreeFill

Reference: A00011


A00039

Element Name: Woodland-Mixed Colour Token: Green362-31

Description: Green362-31_ScreenFill (area fill) coincident with Green362_MixedTreeFill (area pattern)


Area Pattern 1: Area Pattern 2: Green362_MixedTreeFill


Reference: A00009

Type: Area - Fill Name: Green362_MixedTreeFill

Reference: A00013


A00040

Element Name: Mangrove Colour Token: Green362

Description: Cyan-31ScreenFill (area fill) coincident with Green362MangroveFill (area pattern)

Miscellaneous Note: The two area fills are combined as one symbol

Area Pattern 1: Area Pattern 2: Green362_MangroveFill

Name: Cyan-31_ScreenFill

Reference: A00007

Type: Area - Fill Name: Green362_MangroveFill

Reference: A00025


E - 2

DN: 09-048 17 November 2009

A00041

Element Name: NipaPalm Colour Token: Green362

Description: Cyan-31ScreenFill (area fill) coincident with Green362NipaPalmFill (area pattern)


Area Pattern 1: Area Pattern 2: Green362_NipaPalmFill


Reference: A00007

Type: Area - Fill Name: Green362_NipaPalmFill

Reference: A00024


A00049

Element Name: CoversUncovers-Fill Colour Token: Black-12



Area Pattern 1: Area Pattern 2: Black-12_ScreenFill-15degree


Reference: A00007

Type: Area - Fill Name: Black-12_ScreenFill-15degree

Reference: A00048

Type: Area - Fill

A00051

Element Name: Groin-CoversUncovers Colour Token: Black-12

Description: Cyan-31ScreenFill (area fill) coincident with Black-12ScreenFill-15degree (area fill)


Area Pattern 1: Area Pattern 2: Black-12_ScreenFill-15degree


Reference: A00007

Type: Area - Fill Name: Black-12_ScreenFill-15degree

Reference: A00048

Type: Area - Fill

E - 3

DN: 09-048 17 November 2009

Area - Fill

A00002

Element Name: Blue072_SolidFill Colour Token: Blue072


Miscellaneous Note: Solid Fill

A00003

Element Name: Black-12_ScreenFill Colour Token: Black-12 Screen : 45 degrees 12%


A00004



A00005



A00006

Element Name: Black_SolidAreaFill Colour Token: Black



A00007

Element Name: Cyan-31_ScreenFill Colour Token: Cyan-31 Screen : 45 degrees 31%


A00008

Element Name: Cyan-4_ScreenFill Colour Token: Cyan-4 Screen : 45 degrees 4%

Description: Cyan-4 area fill (Cyan 4% screen, 45 degree angle)

A00009

Element Name: Green362-31_ScreenFill Colour Token: Green362-31 Screen : 45 degrees 31%


E - 4

DN: 09-048 17 November 2009

A00010

Element Name: Green362-7_ScreenFill Colour Token: Green362-7 Screen : 45 degrees 7%


A00046

Element Name: Paper-White_ForestClearing Colour Token: Paper-White

Description: Paper-White Solid Fill

A00048

Element Name: Black-12_ScreenFill-15degree Colour Token: Black-12 Screen : 15 degrees 12%


A00054

Element Name: Dk-Brown1815_SolidAreaFill Colour Token: Dk-Brown1815

Description: Dk-Brown1815 Area Solid Fill


A00055



E - 5

DN: 09-048 17 November 2009

Area - Pattern

A00001

Element Name: Black_PeateryFill Colour Token: Black

Description: Black staggered brick fill pattern

Miscellaneous Note: Area Pattern #129

Area Pattern Information: See Element: Black_PeateryFill in Annex I

A00011

Element Name: Green362_DeciduousTreeFill Colour Token: Green362

Description: Green362 DeciduousTreeFill area pattern


Area Pattern Information: See Element: Green362_DeciduousTreeFill in Annex I

A00012

Element Name: Green362_EvergreenTreeFill Colour Token: Green362

Description: Green362 EvergreenTreeFill area pattern


Area Pattern Information: See Element: Green362_EvergreenTreeFill in Annex I

A00013

Element Name: Green362_MixedTreeFill Colour Token: Green362

Description: Green362 MixedTreeFill area pattern


Area Pattern Information: See Element: Green362_MixedTreeFill in Annex I

A00014

Element Name: Black_ShantyTownFill Colour Token: Black

Description: Black Shantytown Fill


Area Pattern Information: See Element: Black_ShantyTownFill in Annex I

E - 6

DN: 09-048 17 November 2009

A00015

Element Name: Cyan_LSIFill Colour Token: Cyan



Area Pattern Information: See Element: Cyan_LSIFill in Annex I

A00016

Element Name: Cyan_SabkhaFill Colour Token: Cyan

Description: Cyan Sabkha Fill


Area Pattern Information: See Element: Cyan_SabkhaFill in Annex I

A00017

Element Name: Cyan_GlacierFill Colour Token: Cyan

Description: Cyan Glacier Fill


Area Pattern Information: See Element: Cyan_GlacierFill in Annex I

A00018

Element Name: Cyan_SwampFill Colour Token: Cyan



Area Pattern Information: See Element: Cyan_SwampFill in Annex I

A00019

Element Name: Cyan_RiceFill Colour Token: Cyan



Area Pattern Information: See Element: Cyan_RiceFill in Annex I

A00020

Element Name: Cyan_DryDrainageFill Colour Token: Cyan



Area Pattern Information: See Element: Cyan_DryDrainageFill in Annex I

E - 7

DN: 09-048 17 November 2009

A00021

Element Name: Cyan_LP15Fill Colour Token: Cyan Screen : 45 degrees 35%


Miscellaneous Note: Line Pattern #15

Area Pattern Information: See Element: Cyan_LP15Fill in Annex I

A00022

Element Name: Dk-Brown1815_MoraineFill Colour Token: Dk-Brown1815

Description: Dk-Brown1815 Moraine Fill


Area Pattern Information: See Element: Dk-Brown1815_MoraineFill in Annex I

A00024

Element Name: Green362_NipaPalmFill Colour Token: Green362

Description: Green362 Nipa Palm Fill area pattern


Area Pattern Information: See Element: Green362_NipaPalmFill in Annex I

A00025

Element Name: Green362_MangroveFill Colour Token: Green362

Description: Green362 Mangrove Fill area pattern


Area Pattern Information: See Element: Green362_MangroveFill in Annex I

A00026

Element Name: Green362_GrasslandFill Colour Token: Green362

Description: Green362 Grassland Fill


Area Pattern Information: See Element: Green362_GrasslandFill in Annex I

A00027

Element Name: Green362_ScrubThicketFill Colour Token: Green362

Description: Green362 Scrub/Thicket Fill


Area Pattern Information: See Element: Green362_ScrubThicketFill in Annex I

E - 8

DN: 09-048 17 November 2009

A00028

Element Name: Green362_OrchardPlantationFill Colour Token: Green362

Description: Green362 Orchard/Plantation Fill


Area Pattern Information: See Element: Green362_OrchardPlantationFill in Annex I

A00029

Element Name: Green362_VineyardHopFill Colour Token: Green362

Description: Green362 Vineyard/Hops Fill


Area Pattern Information: See Element: Green362_VineyardHopFill in Annex I

A00030

Element Name: Dk-Brown1815_DistortedSurfaceFill Colour Token: Dk-Brown1815

Description: Dk-Brown1815 Distorted Surface Fill


Area Pattern Information: See Element: Dk-Brown1815_DistortedSurfaceFill in Annex I

A00031

Element Name: Dk-Brown1815_CrescentDunesFill Colour Token: Dk-Brown1815

Description: Dk-Brown1815 Crescent Sand Dunes Fill


Area Pattern Information: See Element: Dk-Brown1815_CrescentDunesFill in Annex I

A00032

Element Name: Dk-Brown1815_RippleDunesFill Colour Token: Dk-Brown1815

Description: Dk-Brown1815 Ripple Sand Dunes Fill


Area Pattern Information: See Element: Dk-Brown1815_RippleDunesFill in Annex I

A00033

Element Name: Dk-Brown1815_StarDunesFill Colour Token: Dk-Brown1815

Description: Dk-Brown1815 Star Sand Dunes Fill


Area Pattern Information: See Element: Dk-Brown1815_StarDunesFill in Annex I

E - 9

DN: 09-048 17 November 2009

A00034

Element Name: Dk-Brown1815_TransverseDunesFill Colour Token: Dk-Brown1815

Description: Dk-Brown1815 Transverse Sand Dunes Fill


Area Pattern Information: See Element: Dk-Brown1815_TransverseDunesFill in Annex I

A00035

Element Name: Dk-Brown1815_SandFill Colour Token: Dk-Brown1815



Area Pattern Information: See Element: Dk-Brown1815_SandFill in Annex I

A00036

Element Name: Dk-Brown1815_SandandGravelFill Colour Token: Dk-Brown1815



Area Pattern Information: See Element: Dk-Brown1815_SandandGravelFill in Annex I

A00042

Element Name: Dk-Brown1815_DomeDunesFill Colour Token: Dk-Brown1815

Description: Dk-Brown1815 Dome Sand Dunes Fill


Area Pattern Information: See Element: Dk-Brown1815_DomeDunesFill in Annex I

A00043

Element Name: Dk-Brown1815_LinearDunesFill Colour Token: Dk-Brown1815

Description: DK-Brown1815 Linear Sand Dunes Fill


Area Pattern Information: See Element: Dk-Brown1815_LinearDunesFill in Annex I

A00044

Element Name: Cyan_SaltEvaporatorFill Colour Token: Cyan

Description: A grid pattern comprised of 1.5mm x 1.5mm squares. Grid alignment is parallel to longest axis of the perimeter line and centred.

Miscellaneous Note: Lineweight: 0.2mm; Length: 1.5mm; Grid squares: 1.5mm x 1.5mm; Grid alignment parallel to longest axis of perimeter line and centred

E - 10

DN: 09-048 17 November 2009

A00045

Element Name: Black_DamAreaInteriorFill Colour Token: Black


Miscellaneous Note: Interior lines oriented 90 degrees between upstream and downstream lines when dam is straight. When dam is curved, spacing is 0.5mm at

the narrowest (downhill side) and fanned out equally towards the uphill side of the dam not to exceed 0.7mm.

Area Pattern Information: Lineweight: 0.1mm; Interior line spacing: 0.5mm at the narrowest point.

A00047

Element Name: Woodland-ScatteredTrees Colour Token: Green362

Description: Green362 Woodland Scattered Trees Fill


Area Pattern Information: See Element: Woodland-ScatteredTrees in Annex I

A00050

Element Name: Green362_CaneFill Colour Token: Green362

Description: Green362 Cane Fill


Area Pattern Information: See Element: Green362_CaneFill in Annex I

A00053

Element Name: Black_GreenhouseFill Colour Token: Black

Description: Black Greenhouse Fill

Miscellaneous Note: The longest dimension of the diamond pattern should be oriented to the same direction as the longest side of the glasshouse.

Area Pattern Information: A black diamond cross hatching, with 0.4mm between centrelines of the hatch, hatch line wt 0.15mm with a cross angle of 145/35.

A00056

Element Name: Dk-Brown1815_DamAreaInteriorFill Colour Token: Dk-Brown1815


Miscellaneous Note: Interior lines oriented 90 degrees between upstream and downstream lines when dam is straight. When dam is curved, spacing is 0.5mm at

the narrowest (downhill side) and fanned out equally towards the uphill side of the dam not to exceed 0.7mm.

Area Pattern Information: Lineweight: 0.1mm; Interior line spacing: 0.5mm at the narrowest point.

E - 11

DN: 09-048 17 November 2009

F-1

Annex F – Line Elements

Line Elements

Each of the linear elements used in Annex A Symbols have been listed only one time in this Annex.

Line Elements

DN: 09-048 17 November 2009

Line - Complex

L00055

Element Name: Black_Bridge Colour Token: Black

Description: Black 0.3mm Solid Line casing varying based upon separation; Wing Ticks (0.15mm wt, 0.75mm long)

Miscellaneous Note: Tick angle depends on which end of the feature they are placed

Line Style: Element Name: Black_0.3mmSolidCasedLine Element Reference: L00019 Element Type: Line - Simple

Fix Point at Start of Line:

Element Name: Black_0.15mm-0.75mmLenWingTick Element Type: Point - SimpleElement Reference: P00042

Fix Point at End of Line:


L00057

Element Name: Black_Bridge (Draw/Lift) Colour Token: Black

Description: Black 0.3mm Solid Line casing varying based upon separation; Open Circle and Wing Ticks (0.15mm wt, 0.75mm long)

Miscellaneous Note: Tick angle depends on which end of the feature they are placed

Line Style: Element Name: Black_0.3mmSolidCasedLine Element Reference: L00019 Element Type: Line - Simple



Fix Point at Centre of Line:

Element Name: Black_0.3mmCircleOpen Element Type: Point - SimpleElement Reference: P00048



F - 2

DN: 09-048 17 November 2009

L00058

Element Name: Black_Bridge (Pedestrian) Colour Token: Black

Description: Black 0.3mm Solid Line with V (0.15mm wt, 0.75mm long)

Miscellaneous Note: Origin: Apex of 'V' touches bridge ends with ticks facing away

Line Style: Element Name: Black_0.3mmSolidLine Element Reference: L00011 Element Type: Line - Simple


Element Name: Black_0.15mm-0.75mmLenV Element Type: Point - SimpleElement Reference: P00039



L00059

Element Name: Dk-Brown1815_Embankment (WithoutTransport) Colour Token: Dk-Brown1815


Miscellaneous Note: Tick is centred and 90 degrees to line. Tick Interval is 1.500mm

Line Style: Element Name: Dk-Brown1815_0.20mmSolidLine Element Reference: L00023 Element Type: Line - Simple

Repeating Point: Element Name: Dk-Brown1815_0.15mm-0.8mmLenTick Element Reference: P00067 Element Type: Point - Simple


L00060

Element Name: Green362_Hedgerow Colour Token: Green362

Description: Green362_0.1mmOpenCircle circles repeating along the linear feature.

Miscellaneous Note: The repeating point interval is such that the consecutive circles touch edges (centres of consecutive circles are 0.500mm apart)

Line Style: Element Name: 0mmLine Element Reference: L00145 Element Type: Line - Simple

Repeating Point: Element Name: Green362_0.1mmOpenCircle Element Reference: P00111 Element Type: Point - Simple


F - 3

DN: 09-048 17 November 2009

L00061

Element Name: Dk-Brown1815_Levee Colour Token: Dk-Brown1815

Description: Dk-Brown1815 0.25mm Solid Line casing varying based upon separation; Ticks (0.25mm wt, 0.5mm long, 1.5mm interval)

Miscellaneous Note: Tick end is on and at 90 degrees to line, facing downhill. Tick Interval: 1.5mm

Line Style: Element Name: Dk-Brown1815_0.25mmSolidCasedLine Element Reference: L00020 Element Type: Line - Simple



L00062

Element Name: Black_Fence Colour Token: Black

Description: Black 0.2mm Dash Line (0.2mm wt, 5.0mm dash, 1.3mm gap) with 'X' (0.2mm wt, 1.3mm long)

Miscellaneous Note: The black X is centred both about its vertical to the dashed line and in spaces between dashed lines

Line Style: Element Name:

Black_0.2mm-5mmLenDash-1.3mmGapLine


Repeating Point: Element Name: Black_0.2mm-1.3mmLenX Element Reference: P00046 Element Type: Point - Simple

Repeating Point Interval: Centred in the space between dashes

L00063

Element Name: Cyan_IceCliff Colour Token: Cyan

Description: Cyan 0.2mm Dash Line (0.2mm wt, 5.0mm dash, 0.5mm gap) with Tick (0.1mm w,t 0.5mm long, 0.5mm interval)

Miscellaneous Note: Tick end is on and at 90 degrees to dashed line, facing downhill


Cyan_0.2mm-5mmLenDash-0.5mmGapLine


Repeating Point: Element Name: Cyan_0.1mm-0.5mmLenTick Element Reference: P00055 Element Type: Point - Simple


F - 4

DN: 09-048 17 November 2009

L00064

Element Name: Dk-Brown1815_Cliff (High) Colour Token: Dk-Brown1815


Miscellaneous Note: Tick end is on and at 90 degrees to line, facing downhill




L00066

Element Name: Dk-Brown1815_Slope (High) Colour Token: Dk-Brown1815


Miscellaneous Note: Tick end is on and at 90 degrees to line, facing downhill. Tick Interval: 1.5mm




L00067

Element Name: Dk-Brown1815_Slope (Low) Colour Token: Dk-Brown1815

Description: 0mm Line with Dk-Brown1815_0.25mm-3mm_TickLine (Line segment: 0.25 mm wt, 3.0mm len Ticks: 0.25mm wt, 0.5mm len, placed at 1.0mm

and 2.0mm along line segment) repeating along the line.

Miscellaneous Note: Ticks point downhill.


Repeating Point: Element Name: Element Reference: Element Type:

Repeating Point Interval: 3.5mm between left end of line segments or 0.5mm gap between consecutive segments

F - 5

DN: 09-048 17 November 2009

L00068

Element Name: Black_Pipeline (Other) Colour Token: Black

Description: Black 0.3mm Solid Line with 'V' (0.2mm wt, 0.7mm long)

Miscellaneous Note: Origin: Apex of 'V' touches pipeline ends with "legs" of "V" facing away






L00069

Element Name: Cyan_Pipeline (Water) Colour Token: Cyan


Miscellaneous Note: Origin: Apex of 'V' touches pipeline ends with "legs" of "V" facing away

Line Style: Element Name: Cyan_0.3mmSolidLine Element Reference: L00016 Element Type: Line - Simple


Element Name: Cyan_0.2mm-0.7mmLenV Element Type: Point - SimpleElement Reference: P00058



L00070

Element Name: Blue072_Powerline (Normal) Colour Token: Blue072


Miscellaneous Note: The repeating point is also positioned at points of directional change. The symbol should remain up most. Interval is 12.5mm

Line Style: Element Name: Blue072_0.4mmSolidLine Element Reference: L00005 Element Type: Line - Simple

Repeating Point: Element Name: Blue072_Pylon Element Reference: P00020 Element Type: Point - Shape


F - 6

DN: 09-048 17 November 2009

L00071

Element Name: Blue072_Powerline (Catenary) Colour Token: Blue072


Miscellaneous Note: The repeating point is also positioned at points of directional change. The symbol should remain up most. Interval is 12.5mm

Line Style: Element Name: Blue072_0.73mmSolidLine Element Reference: L00006 Element Type: Line - Simple

Repeating Point: Element Name: Blue072_Pylon Element Reference: P00020 Element Type: Point - Shape


L00072

Element Name: Black_Railway (Double Normal Gauge, Non-Electric) Colour Token: Black


Miscellaneous Note: Ticks are centred and 90 degrees to line.


Repeating Point: Element Name: Black_0.15mm-1.5mmLenTick Element Reference: P00044 Element Type: Point - Simple


2nd Repeating Point: Element Name: Black_0.15mm-1.5mmLenTick Element Type: Point - SimpleElement Reference: P00044


L00073

Element Name: Black_Railway (Double Narrow Gauge, Non-Electric) Colour Token: Black


Miscellaneous Note: Ticks are 90 degrees to line and tick pairs alternate on either side of the line.






F - 7

DN: 09-048 17 November 2009

L00074

Element Name: Black_Railway (Double Normal Gauge, Electric) Colour Token: Black


Miscellaneous Note: Ticks are centred and 90 degrees to line. Bottom of each dot is offset 0.75mm from the centre of the line style line.





Repeating Point Interval: Initial offset 3.7mm after that 6.9mm

3rd Repeating Point: Element Name: Black_0.5mmDotFilled Element Type: Point - SimpleElement Reference: P00049

Repeating Point Interval: Initial offset: 3.05mm after that 13.8mm. Dots are placed on every other pair of ticks on the north/west most

side of the track.

4th Repeating Point: Element Name: Black_0.5mmDotFilled Element Type: Point - Simple


side of the track.

Element Reference: P00049

F - 8

DN: 09-048 17 November 2009

L00075

Element Name: Black_Railway (Single Narrow Gauge, Electric) Colour Token: Black


Miscellaneous Note: Ticks are 90 degrees to line and alternate on either side of the line. Bottom of each dot is offset 0.75mm from the centre of the line style

line




2nd Repeating Point: Element Name: Black_0.5mmDotFilled Element Type: Point - SimpleElement Reference: P00049

Repeating Point Interval: Initial offset: 2.95mm after that 12.8mm. Dots are placed on every tick on the north/west most side of the

track since ticks alternate sides


Repeating Point Interval: Initial offset: 3.45mm after that 12.8mm. Dots are placed on every tick on the north/west most side of the

track since ticks alternate sides.

F - 9

DN: 09-048 17 November 2009

L00076

Element Name: Black_Railway (Double Narrow Gauge, Electric) Colour Token: Black



line







Repeating Point Interval: Initial offset: 3.05mm after that 13.8mm. Dots are placed on every pair of ticks on the north/west most side

of the track since ticks alternate sides.



of the track since ticks alternate sides.


L00077

Element Name: Black_Railway (Double Normal Gauge, Non-Electric, not in use) Colour Token: Black


Miscellaneous Note: Tick pair is centred in dash and 90 degrees to line. There is a 0.5mm gap between each tick in the tick pair.


Black_0.3mm-5.9mmLenDash-0.5mmGapLine






F - 10

DN: 09-048 17 November 2009

L00078

Element Name: Black_Railway (Single Normal Gauge, Non-Electric, not in use) Colour Token: Black


Miscellaneous Note: Tick is centred in dash and 90 degrees to line.






L00079

Element Name: Black_Railway (Single Narrow Gauge, Non-Electric, not in use) Colour Token: Black


Miscellaneous Note: Ticks are based 90 degrees to line and alternate on either side of the line. Tick is centred along dash.






L00080

Element Name: Black_Railway (Double Narrow Gauge, Non-Electric, not in use) Colour Token: Black


Miscellaneous Note: Tick pair is centred in dash and 90 degrees to line. Tick pairs alternate on either side of the line.








F - 11

DN: 09-048 17 November 2009

L00081

Element Name: Black_Car-Line Colour Token: Black


Miscellaneous Note: Ticks are centred and 90 degrees to line. Tick length extends across road.




L00083

Element Name: Black_Railway (Single Narrow Gauge, Electric, not in use) Colour Token: Black


Miscellaneous Note: Ticks are 90 degrees to line and alternate on either side of the line. Bottom of each dot is 0.75mm from the centre of the line style line







Repeating Point Interval: Initial offset: 2.7mm after that 12.8mm. Dots are placed on every other tick on the north/west most side of

the track



the track

F - 12

DN: 09-048 17 November 2009

L00084

Element Name: Black_Railway (Double Narrow Gauge, Electric, not in use) Colour Token: Black

Description: Black 0.3mm Dash Line (0.3mm wt, 5.9mm dash, 0.5mm gap) with Double Ticks (0.15mm wt, 0.75mm long, 6.4mm interval ) and 0.5mm Dots


line










of the track since ticks alternate sides



of the track since ticks alternate sides


F - 13

DN: 09-048 17 November 2009

L00085

Element Name: Black_Railway (Single Normal Gauge, Electric, not in use) Colour Token: Black


Miscellaneous Note: Tick is centred in dash and 90 degrees to line. Bottom of each dot is offset 0.75mm from the centre of the line style line







Repeating Point Interval: Initial offset: 2.7mm after that 6.4mm. Dots are placed on every other tick on the north/west most side of the

track


Repeating Point Interval: Initial offset: 3.2mm after that 6.4mm. Dots are placed on every other tick on the north/west most side of the

track

F - 14

DN: 09-048 17 November 2009

L00086

Element Name: Black_Railway (Double Normal Gauge, Electric, not in use) Colour Token: Black

Description: Black 0.3mm Dash Line (0.3mm wt, 5.9mm dash, 0.5mm gap) with Double Ticks (0.15mm wt, 0.75mm long, 6.4mm interval ) and 0.5mm Dots

Miscellaneous Note: Tick pair is centred in dash and 90 degrees to line. Bottom of each dot is offset 0.75mm from the centre of the line style line










the track



the track


L00087

Element Name: Black_Railway (Single Narrow Gauge, Non-Electric) Colour Token: Black


Miscellaneous Note: Ticks are 90 degrees to line and alternate on either side of the line.




F - 15

DN: 09-048 17 November 2009

L00088

Element Name: Black_Railway (Single Normal Gauge, Electric) Colour Token: Black


Miscellaneous Note: Ticks are centred 90 and degrees to line. Bottom of each dot is offset 0.75mm from the centre of the line style line






side of the track.



side of the track.

L00090

Element Name: Black_RailwaySpur (Single Narrow Gauge, Electric) Colour Token: Black


Miscellaneous Note: Tick is based 90 degrees to line and set alternate on either side of the line. Bottom of Dot is 0.75mm from the centre of the line





Repeating Point Interval: Space between one set of 2 dots is 0.5mm; Dots centred on every other pair of ticks on the north/west most

side of the track

F - 16

DN: 09-048 17 November 2009

L00091

Element Name: Black_RailwaySpur (Single Narrow Gauge, Non-Electric) Colour Token: Black


Miscellaneous Note: Tick is based 90 degrees to line and set alternate on either side of the line.




L00092

Element Name: Black_RailwaySpur (Single Normal Gauge, Electric) Colour Token: Black


Miscellaneous Note: Tick is centred and 90 degrees to line. Bottom of Dot is 0.75mm from the centre of the line





Repeating Point Interval: Space between one set of 2 dots is 0.5mm; Dots are centred on every other pair of ticks on the north/west

most side of the track

L00093

Element Name: Black_Railway (Single Normal Gauge, Non-Electric) Colour Token: Black


Miscellaneous Note: Ticks are centred and 90 degrees to line




F - 17

DN: 09-048 17 November 2009

L00094

Element Name: Cyan_TunnelAqueduct Colour Token: Cyan

Description: Cyan 0.2mm Cased Dash Line (0.2mm wt, 2.0mm dash, 0.5mm gap) with Tunnel Water Entrance/Exit

Miscellaneous Note: Wing Ticks always point away from the tunnel line; 1 Tunnel Water Entrance/Exit placed centred at opposite ends of the tunnel at 90

degrees to the line


Cased_Cyan_0.2mmDashed-0.5mmGapLine



Element Name: Cyan0.2mmTick-Entrance/Exit Element Type: Point - SimpleElement Reference: P00074



L00095

Element Name: Cyan_TunnelCanal Colour Token: Cyan

Description: Cyan 0.2mm Dash Line (0.2mm wt, 2.0mm dash, 0.5mm gap) with Tunnel Water Entrance/Exit

Miscellaneous Note: Wing Ticks always point away from the tunnel line; 1 Tunnel Water Entrance/Exit placed centred at opposite ends of the tunnel at 90

degrees to the line


Cyan_0.2mm-2mmLenDash-0.5mmGapLine






F - 18

DN: 09-048 17 November 2009

L00096

Element Name: Black_TunnelRail Colour Token: Black

Description: Black 0.3mm Dash Line (0.3mm wt, 2.0mm dash, 0.5mm gap) with Tunnel Rail

Miscellaneous Note: Wing Ticks always point away from the tunnel line. 1 Tunnel Rail Entrance/Exit placed centred at opposite ends of the tunnel at 90

degrees to the line





Element Name: Black_0.1mmTick-Entrance/Exit Element Type: Point - SimpleElement Reference: P00072



L00097

Element Name: Black_TunnelRoad Colour Token: Black

Description: Black 0.3mm Dash Line (0.3mm wt, 2.0mm dash, 0.5mm gap) with Tunnel Road

Miscellaneous Note: Wing Ticks always point away from the tunnel line. 1 Tunnel Road Entrance/Exit placed centred at opposite ends of the tunnel at 90

degrees to the line


Cased_Black_0.3mmDashed-0.5mmGapLine






F - 19

DN: 09-048 17 November 2009

L00100

Element Name: Dk-Brown1815_Columnar-Rock-Outline Colour Token: Dk-Brown1815

Description: Dk-Brown1815 02 Solid Line with a Red-Brown 02-01 Tick (0.2mm wt, 0.1mm long, 0.8mm interval)





L00101

Element Name: Dk-Brown1815_Embankment-Outline Colour Token: Dk-Brown1815






L00102

Element Name: Black_Lock-Outline Colour Token: Black

Description: Black 04 Solid Lines along edges with Black 025 Solid Lines at 45 degree pointing upstream

Miscellaneous Note: Lock ends positioned with apex at 45 degrees pointing upstream


2nd Line Style: Element Name: Black_0.25mmSolidLine Element Reference: L00010 Element Type: Line - Simple

F - 20

DN: 09-048 17 November 2009

L00103

Element Name: Black_Railway-Yard Colour Token: Black

Description: Black 02 Solid Line with Black 015-1 Ticks (0.15mm wt, 1.0mm long, 6.4mm interval) as a perimeter, with the same symbol running through the

area spaced 0.4mm

Miscellaneous Note: Tick is centred and 90 degrees to line


Repeating Point: Element Name: Black_0.15mm-1mmLenTick Element Reference: P00043 Element Type: Point - Simple


L00104

Element Name: Black_Park-Outline Colour Token: Black

Description: Black 02-65-25 Dash Line (0.2mm wt, 6.5mm dash, 2.5mm gap) with a Black Dot (0.25mm diameter) between dashes




Repeating Point: Element Name: Black_0.25mmDotFilled Element Reference: P00047 Element Type: Point - Simple

Repeating Point Interval: Centre dot in space between dashes

L00106

Element Name: Cyan_Aqueduct / Penstock Colour Token: Cyan


Miscellaneous Note: Origin: Apex of 'V' touches line ends with ticks facing away






F - 21

DN: 09-048 17 November 2009

L00111

Element Name: Dk-Brown1815_Land-DepressionIndex Colour Token: Dk-Brown1815


Miscellaneous Note: Each depression contour shall have ticks spaced equally on each descending depression contour. Where the slope of a depression is

such that the contours become very close, the length of the depression ticks may be reduced by 1/2 to achieve legibility.




L00112

Element Name: Cyan_SnowIce-DepressionIndex Colour Token: Cyan


Miscellaneous Note: Each depression contour shall have ticks spaced equally. Where the slope of a depression is such that the contours become very close,

the length of the depression ticks may be reduced by one-half to achieve legibility.




L00113

Element Name: Dk-Brown1815_Land-DepressionIntermediate Colour Token: Dk-Brown1815


Miscellaneous Note: Depression contours shall have ticks spaced equally on each descending depression contour line. Where the slope of a depression is

such that the contours become very close, the length of the depression ticks may be reduced by 1/2 to achieve legibility.




F - 22

DN: 09-048 17 November 2009

L00114

Element Name: Cyan_SnowIce-DepressionIntermediate Colour Token: Cyan


Miscellaneous Note: Each depression contour shall have ticks spaced equally pointing into the depression. Where the slope of a depression is such that the

contours become very close, the length of the depression ticks may be reduced by 1/2 to achieve legibility.




L00115

Element Name: Dk-Brown1815_Land-MoundIndex Colour Token: Dk-Brown1815





L00116

Element Name: Dk-Brown1815_Land-MoundIntermediate Colour Token: Dk-Brown1815





F - 23

DN: 09-048 17 November 2009

L00119

Element Name: Dk-Brown1815_Land-DepressionAuxillary Colour Token: Dk-Brown1815


Line Style: Element Name: Dk-Brown1815_0.1mm-3mmLenDashLine Element Reference: L00109 Element Type: Line - Styled



L00120

Element Name: Cyan_SnowIce-DepressionAuxillary Colour Token: Cyan


Line Style: Element Name: Cyan_0.1mm-3mmLenDashLine Element Reference: L00110 Element Type: Line - Styled



L00124

Element Name: Dk-Brown1815-54_International-Boundary Colour Token:

Dk-Brown1815-54

Description: Black 0.5mm Dash Line (0.5mm wt, long dash 7.0mm, short dash 2.0mm; 1 long / 2 shorts) Dk-Brown1815-54 2mm 60 degree overprint

Miscellaneous Note: Dk-Brown1815-54 overprint is centred on dashed line. Black Dashed line sequence is 1 long dash followed by 2 short dashes.

Line Style: Element Name: Black_0.5mm-7mmDash-2x2mmDashLine Element Reference: L00122 Element Type: Line - Styled

2nd Line Style: Element Name: Dk-Brown1815-54_2.0mmScreenedLine Element Reference: L00123 Element Type: Line - Simple

L00127

Element Name: Dk-Brown1815-42_ArmisticeLine-Boundary Colour Token:

Dk-Brown1815-42

Description: Black 0.3mm Dash Line (0.3mm wt, 5.0mm dash; 1.0mmgap) Dk-Brown1815-42 2.0mm 60 degree overprint

Miscellaneous Note: Dk-Brown1815-42 overprint is centred on dashed line.




2nd Line Style: Element Name: Dk-Brown1815-42_2.0mmScreenedLine Element Reference: L00126 Element Type: Line - Simple

F - 24

DN: 09-048 17 November 2009

L00129

Element Name: Black_AdminBoundary Colour Token: Black

Description: Black 0.2mm Dash Line (0.2mm wt, 6.1mm dash, 2.5mm gap) with 0.25mm filled dot centred in dash gap





Repeating Point Interval: Dot centred in dash gap

L00132

Element Name: Black_AdminDivision-Primary Colour Token: Black

Description: Black 0.3mm Dash Line (0.3mm wt, 7.0mm dash, 1.0mm gap) and Black 0.3mm, 2mm dash, 1.0mm gap

Miscellaneous Note: Long and short dashes alternate




2nd Line Style: Element Name: Black_0.3mm-2mmLenDash-1mmGapLine Element Reference: L00131 Element Type: Line - Styled

L00134

Element Name: Black_AdminDivision-Tertiary Colour Token: Black

Description: Black 0.3mm Dash Line (0.3mm wt, 7.0mm dash, 1.5mm gap) and 0.4mm Filled Dot (repeating)

Miscellaneous Note: Sequence is 1 linear dash followed by 3 dots. Gap is 1.5mm between individual dots and between group of dots and the dash.






F - 25

DN: 09-048 17 November 2009

L00136

Element Name: Black_MaritimeArea-International Colour Token: Black

Description: Black 0.25mm Dash Line (0.25mm wt, 3.0mm dash, 1.0mm gap) and 0.25mm, 1.5mm long tick

Miscellaneous Note: The tick is centred on every second dash


Black_0.25mm-3mmLenDash-1mmGapLine



Repeating Point Interval: centred on every second dash

L00139

Element Name: Black_DamAreaPerimeter Colour Token: Black

Description: Upstream: Black 0.4mm Solid Line Downstream: Black 0.1mm Solid Line

Miscellaneous Note: Use 0.4mm Black solid line for upstream and 0.1mm Black solid line for downstream


2nd Line Style: Element Name: Black_0.1mmSolidLine Element Reference: L00007 Element Type: Line - Simple

L00140

Element Name: Black_RailwayInRoad Colour Token: Black






F - 26

DN: 09-048 17 November 2009

L00141

Element Name: Black_RailwaySide-StandardNonElectric Colour Token: Black






L00144

Element Name: Black_Dotted-Line Colour Token: Black

Description: Black 0.25mm diameter filled dots repeating along the line but without a line style. The spacing between dots is 0.750mm




L00148

Element Name: Black_Cableway_Obstruction Colour Token: Black

Description: Black Dashed line (0.2mm wt, 2.0mm Dash, 0.5 Gap), with repeating "sawtooth pattern" ticks (Blue072 0.4mm wt, 2.5mm length, alternating

between 60 and 120 degree orientation)




Repeating Point: Element Name: Blue072_Sawtooth_Left Element Reference: P00105 Element Type: Point - Simple


2nd Repeating Point: Element Name: Blue072_Sawtooth_Right Element Type: Point - SimpleElement Reference: P00106


F - 27

DN: 09-048 17 November 2009

L00150

Element Name: Blue072_Aircraft_Revetment Colour Token: Blue072

Description: Blue072 open square fixed at the start and repeating along a Blue072 dashed line

Miscellaneous Note: The Blue072 open square is centred in the dash gap and completely fills the "gap" in the dashed line.


Blue072_0.2mm-4mmLenDash-1mmGapLine


Repeating Point: Element Name: Blue072_0.2mm-1.0mmwideSquareOpen Element Reference: P00110 Element Type: Point - Simple

Repeating Point Interval: 5.0mm such that the square is centred within the Gap and fills the gap.


Element Name: Blue072_0.2mm-1.0mmwideSquareOpen Element Type: Point - SimpleElement Reference: P00110

L00152

Element Name: Black_CommunicationLine_Obstruction Colour Token: Black

Description: Black Dashed line (0.1mm wt, 2.0mm Dash, 0.5 Gap), with repeating "sawtooth pattern" ticks (Blue072 0.4mm wt, 2.5mm length, alternating

between 60 and 120 degree orientation)




Repeating Point: Element Name: Blue072_Sawtooth_Left Element Reference: P00105 Element Type: Point - Simple


2nd Repeating Point: Element Name: Blue072_Sawtooth_Right Element Type: Point - SimpleElement Reference: P00106


L00154

Element Name: Road_HardSurface_Operational_Single_NoMedian Colour Token: Dk-Brown1815


Miscellaneous Note: The Black_0.6mmSolidLine line and the Dk-Brown1815_0.3mmSolidLine are centred on the linear feature. The Black line is placed

beneath the Dk-Brown1815_0.3mmSolidLine to form the cased line.


2nd Line Style: Element Name: Dk-Brown1815_0.3mmSolidLine Element Reference: L00105 Element Type: Line - Simple

F - 28

DN: 09-048 17 November 2009

L00157

Element Name: Road_HardSurface_Operational_Dual_NoMedian Colour Token: Dk-Brown1815


Miscellaneous Note: The Black_0.8mmSolidLine line and the Dk-Brown1815_0.5mmSolidLine are centred on the linear feature. The Black line is placed

beneath the Dk-Brown1815_0.5mmSolidLine to form the cased line.



L00160

Element Name: Road_HardSurface_Operational_Median_MultipleLanes Colour Token: Dk-Brown1815

Description: Black 1.0mm Solid Line (1.0mm wt), Black 0.1mm Solid Line (0.1mm wt) and Dk-Brown1815 0.6mm Solid Line (0.6mm wt)

Miscellaneous Note: The Black_1.0mmSolidLine line, the Dk-Brown1815_0.6mmSolidLine, and the Black_0.1mmSolidLine are centred on the linear feature.

The Black 1.0mm line is placed at the bottom and the Dk-Brown1815_0.6mmSolidLine is placed beneath the 0.1mm Black line.



3rd Line Style: Element Name: Black_0.1mmSolidLine Element Reference: L00007 Element Type: Line - Simple

L00161

Element Name: Road_LooseSurface_Operational_NoMedian_1Lane Colour Token: Dk-Brown1815

Description: Black 0.6mm Solid Line (0.6mm wt), White 0.3mm Solid Line (0.3mm wt) and Dk-Brown1815 0.3mm 3.0mm Dash/1.5 Gap dashed line

Miscellaneous Note: The 3 lines are centred on the linear geometry. The Black 0.6mm Solid line is placed on the bottom, the PaperWhite 0.3mm Solid line is

placed in the middle and the Dk-Brown1815 0.3 3mm Dash/1.5mm Gap line is placed on top.


2nd Line Style: Element Name: PaperWhite_0.3mmSolidLine Element Reference: L00166 Element Type: Line - Simple

3rd Line Style: Element Name:

Dk-Brown1815_0.3mm-3mmLenDash-1.5mmGapLine


F - 29

DN: 09-048 17 November 2009

L00162

Element Name: Road_LooseSurface_Operational_NoMedian_MultipleLanes Colour Token: Dk-Brown1815

Description: Black 0.8mm Solid Line (0.8mm wt) with alternating repeating points Dk-Brown1815_0.5mm-3.0mm_Line and PaperWhite_0.5mm-1.5mm_Line

Miscellaneous Note: The 3 lines are centred on the linear geometry. The Black 0.8mm Solid line is placed on the bottom, the PaperWhite 0.5mm Solid line is

placed in the middle and the Dk-Brown1815 0.5 3mm Dash/1.5mm Gap line is placed on top.




Dk-Brown1815_0.5mm-3mmLenDash-1.5mmGapLine


L00165

Element Name: Road_HardSurface_Construction_NoMedian_1Lane Colour Token: Dk-Brown1815

Description: PaperWhite 0.6mm Solid Line and Black_0.6mm-2.5mmLenDash-0.5mmGapLine and Dk-Brown1815_0.3mm-2.5mmLenDash-0.5mmGapLine

Miscellaneous Note: The PaperWhite 0.6mm solid line is placed beneath the Black_0.6mm-2.5mmLenDash-0.5mmGapLine line and it is placed beneath the

Dk-Brown1815_0.3mm-2.5mmLenDash-0.5mmGapLine line. The gaps are coincident between the two dashed lines.

Line Style: Element Name: PaperWhite_0.6mmSolidLine Element Reference: L00182 Element Type: Line - Simple

2nd Line Style: Element Name:






L00167

Element Name: Road_Fair_Loose_Operational_ClassUnknown Colour Token: Black

Description: Black 0.6mm Solid Line and PaperWhite 0.3mm Solid line. The Black 0.6mm Solid Line is placed beneath the PaperWhite 0.3mm line. Both lines

are centred on the linear geometry.

Miscellaneous Note: Both lines are centred on the linear geometry with the Black 0.6mm Solid Line beneath the PaperWhite 0.3mm Solid line to form the

casing.



F - 30

DN: 09-048 17 November 2009

L00171

Element Name: Road_HardSurface_Construction_Median_MultipleLanes Colour Token: Black

Description: PaperWhite 1.0 solid line, Black_1.0 dashed line, Dk-Brown1815_0.6mm dashed line, and Black_0.1mm dashed line. The 4 lines are all centred

on the line. Bot: PaperWhite line, Mid Bot: Black 1.0 line, Mid Top: Dk-Brown1815 line, Top: Black_0.1 line.

Miscellaneous Note: The 4 lines are centred on the linear geometry. The gaps are coincident. Display Level: Bottom:PaperWhite 1.0mm Bottom

Mid:Black_1.0mm-2.5mmLenDash-0.5mm, Top Mid:Dk-Brown1815_0.6mm-2.5mmLenDash-0.5mmGapLine Top:

Black_0.1mm-2.5mmLenDash-0.5mmGapLine.








4th Line Style: Element Name:

Black_0.1mm-2.5mmLenDash-0.5mmGap-0.5mmGapLine


L00174

Element Name: Road_HardSurface_Construction_NoMedian_MultipleLanes Colour Token: Dk-Brown1815

Description: PaperWhite 0.8mm Solid Line and Black_0.8mm-2.5mmLenDash-0.5mmGapLine and Dk-Brown1815_0.5mm-2.5mmLenDash-0.5mmGapLine

Miscellaneous Note: The PaperWhite 0.8mm solid line is placed beneath the Black_0.8mm-2.5mmLenDash-0.5mmGapLine line and it is placed beneath the

Dk-Brown1815_0.5mm-2.5mmLenDash-0.5mmGapLine line. The gaps are coincident between the two lines.



Black_0.8-2.5mmLenDash-0.5mmGap-0.5mmGapLine





F - 31

DN: 09-048 17 November 2009

L00179

Element Name: Dk-Brown1815_Land-DepressionQuarterAuxillary Colour Token: Dk-Brown1815



Dk-Brown1815_0.1mm-1.5mmLenDashLine




L00180

Element Name: Cyan_SnowIce-DepressionQuarterAuxillary Colour Token: Cyan



Cyan_0.1mm-1.5mmLenDash-0.5mmGapLine




L00181

Element Name: Black_Lock_Line Colour Token: Black

Description: Black 0.3mm Solid Line with Black 0.1mm "V" afixed to each end. The apex of the "V" points upstream.

Miscellaneous Note: The apex of the "V" placed at both ends of the line points upstream.



Element Name: Black_0.1mmV Element Type: Point - SimpleElement Reference: P00035


Element Name: Black_0.1mmV Element Type: Point - SimpleElement Reference: P00035

F - 32

DN: 09-048 17 November 2009

L00189

Element Name: Road_LooseSurface_Construction_NoMedian_1Lane Colour Token: Dk-Brown1815



Miscellaneous Note: The 4 lines are centred on the linear geometry. Display Level: Bottom:PaperWhite 0.6mm Bottom






3rd Line Style: Element Name: PaperWhite_0.3mmSolidLine Element Reference: L00166 Element Type: Line - Simple


Dk-Brown1815_0.3mm-3-3-1.5-1.5-1.5-3DashLine


L00190

Element Name: Road_LooseSurface_Construction_NoMedian_MultipleLanes Colour Token: Dk-Brown1815



Miscellaneous Note: The 4 lines are centred on the linear geometry. Display Level: Bottom:PaperWhite 0.8mm Bottom






3rd Line Style: Element Name: PaperWhite_0.5mmSolidLine Element Reference: L00186 Element Type: Line - Simple


Dk-Brown1815_0.5mm-3-3-1.5-1.5-1.5-3DashLine


L00194

Element Name: Dk-Brown1815_DamAreaPerimeter Colour Token: Dk-Brown1815

Description: Upstream: Dk-Brown1815 0.4mm Solid Line Downstream: Dk-Brown1815 0.1mm Solid Line

Miscellaneous Note: Use 0.4mm Dk-Brown1815 solid line for upstream and 0.1mm Dk-Brown1815 solid line for downstream



F - 33

DN: 09-048 17 November 2009

L00196

Element Name: Dk-Brown1815_Cut Colour Token: Dk-Brown1815


Miscellaneous Note: Tick end is on and at 90 degrees to line. Tick Interval: 1.5mm




L00197

Element Name: Black_Ford Colour Token: Black

Description: A black dashed line (0.2mm wt, 2.0mm Dash Length, 0.5mm Dash Gap) with cyan "V"s attached at the start and end of the line. The "V"s apex

point inward towards the related hydrographic feature








F - 34

DN: 09-048 17 November 2009

Line - Simple

L00005

Element Name: Blue072_0.4mmSolidLine Colour Token: Blue072


Line Weight: 0.4mm

L00006

Element Name: Blue072_0.73mmSolidLine Colour Token: Blue072


Line Weight: 0.73mm

L00007

Element Name: Black_0.1mmSolidLine Colour Token: Black


Line Weight: 0.1mm

L00008



Line Weight: 0.15mm

L00009



Line Weight: 0.2mm

L00010



Line Weight: 0.25mm

F - 35

DN: 09-048 17 November 2009

L00011



Line Weight: 0.3mm

L00013



Line Weight: 0.4mm

L00014



Line Weight: 0.5mm

L00015

Element Name: Cyan_0.2mmSolidLine Colour Token: Cyan


Line Weight: 0.2mm

L00016



Line Weight: 0.3mm

L00017



Line Weight: 0.4mm

F - 36

DN: 09-048 17 November 2009

L00019

Element Name: Black_0.3mmSolidCasedLine Colour Token: Black

Description: Black 0.3mm Solid Cased Line (0.3mm wt). Two 0.3mm solid lines equally offset and parallel to the linear geometry. The spacing between the

two lines is variable to the width of the over passing transportation feature

Miscellaneous Note: Casing: Spacing is variable to the width of the over passing transportation feature

Line Weight: 0.3mm

L00020

Element Name: Dk-Brown1815_0.25mmSolidCasedLine Colour Token: Dk-Brown1815

Description: Dk-Brown1815 0.25mm Solid Cased Line (0.25mm wt)

Miscellaneous Note: Casing: Spacing is variable to the width of the over passing feature

Line Weight: 0.25mm

L00021

Element Name: Green362_0.2mmSolidLine Colour Token: Green362

Description: Green362 0.2mm Solid Line (0.2mm wt)

Line Weight: 0.2mm

L00022

Element Name: Green362-54_0.4mmScreenedLine Colour Token: Green362-54

Description: Green362-54 0.4 Solid Screened Line (0.4mm wt)

Line Weight: 0.4mm

L00023

Element Name: Dk-Brown1815_0.20mmSolidLine Colour Token: Dk-Brown1815


Line Weight: 0.2mm

L00024



Line Weight: 0.25mm

F - 37

DN: 09-048 17 November 2009

L00105



Line Weight: 0.3mm

L00107



Line Weight: 0.1mm

L00108



Line Weight: 0.1mm

L00123

Element Name: Dk-Brown1815-54_2.0mmScreenedLine Colour Token:

Dk-Brown1815-54

Description: Dk-Brown1815-54 2mm Solid Line (2.0mm wt. 60 degree screen angle)

Line Weight: 2.0mm

L00126

Element Name: Dk-Brown1815-42_2.0mmScreenedLine Colour Token:

Dk-Brown1815-42

Description: Dk-Brown1815-42 2mm Screened Solid Line (60 degree angle)

Line Weight: 2.0mm

L00145

Element Name: 0mmLine Colour Token: Black


Line Weight: 0.0mm

F - 38

DN: 09-048 17 November 2009

L00153



Line Weight: 0.6mm

L00155



Line Weight: 0.8mm

L00156



Line Weight: 0.5mm

L00158



Line Weight: 1.0mm

L00159



Line Weight: 0.6mm

L00166

Element Name: PaperWhite_0.3mmSolidLine Colour Token: PaperWhite


Line Weight: 0.3mm

F - 39

DN: 09-048 17 November 2009

L00182



Line Weight: 0.6mm

L00183



Line Weight: 0.8mm

L00184



Line Weight: 1.0mm

L00186



Line Weight: 0.5mm

L00195



Line Weight: 0.4mm

F - 40

DN: 09-048 17 November 2009

Line - Styled

L00029

Element Name: Black_0.1mm-2mmLenDash-0.5mmGapLine Colour Token: Black



L00031




L00032




L00033




L00034

Element Name: Black_0.2mm-6.5mmLenDash-2.5mmGapLine Colour Token: Black



L00035




F - 41

DN: 09-048 17 November 2009

L00036




L00037




L00039




L00040

Element Name: Cyan_0.2mm-1mmLenDash-0.5mmGapLine Colour Token: Cyan



L00041




L00042




F - 42

DN: 09-048 17 November 2009

L00043




L00044

Element Name: Cyan_0.3mm-2.5mmLenDash-0.5mmGapLine Colour Token: Cyan



L00045




L00046

Element Name: Cased_Black_0.3mmDashed-0.5mmGapLine Colour Token: Black

Description: Black 0.3mm Cased Dash Line (0.3mm wt, 2.0mm dash, 0.5mm gap)

Miscellaneous Note: Casing: spacing 1.3mm


L00047

Element Name: Cased_Cyan_0.2mmDashed-0.5mmGapLine Colour Token: Cyan

Description: Cyan 0.2mm Cased Dash Line (0.2mm wt, 2.0mm dash, 0.5mm gap)

Miscellaneous Note: Casing: spacing 1.3mm


L00109

Element Name: Dk-Brown1815_0.1mm-3mmLenDashLine Colour Token: Dk-Brown1815



F - 43

DN: 09-048 17 November 2009

L00110

Element Name: Cyan_0.1mm-3mmLenDashLine Colour Token: Cyan



L00117

Element Name: Dk-Brown1815_0.1mm-1.5mmLenDashLine Colour Token: Dk-Brown1815



L00118

Element Name: Cyan_0.1mm-1.5mmLenDash-0.5mmGapLine Colour Token: Cyan



L00121

Element Name: Black_0.25mm-6mmLenDashLine Colour Token: Black



L00122

Element Name: Black_0.5mm-7mmDash-2x2mmDashLine Colour Token: Black

Description: Black 0.5mm Dash Line (0.5mm wt, long dash 7.0mm, short dash 2.0mm)

Miscellaneous Note: 2 short dashes follow 1 long dash


2nd Dash Length: 2.0mm 2nd Dash Spacing: 1.0mm

L00125




F - 44

DN: 09-048 17 November 2009

L00128




L00130




L00131

Element Name: Black_0.3mm-2mmLenDash-1mmGapLine Colour Token: Black



L00133




L00135

Element Name: Black_0.25mm-3mmLenDash-1mmGapLine Colour Token: Black



L00137




F - 45

DN: 09-048 17 November 2009

L00149

Element Name: Blue072_0.2mm-4mmLenDash-1mmGapLine Colour Token: Blue072

Description: Blue072 Dashed line (0.2mm wt, 4.0mm Dash, 1.0mm Gap)

Miscellaneous Note: The Blue072 open square is centred in the dash gap and completely fills the "gap" in the dashed line.


L00163




L00164

Element Name: Dk-Brown1815_0.3mm-2.5mmLenDash-0.5mmGapLine Colour Token: Dk-Brown1815



L00168




L00169




L00170

Element Name: Black_0.1mm-2.5mmLenDash-0.5mmGap-0.5mmGapLine Colour Token: Black



F - 46

DN: 09-048 17 November 2009

L00172

Element Name: Black_0.8-2.5mmLenDash-0.5mmGap-0.5mmGapLine Colour Token: Black



L00173




L00175




L00176

Element Name: Dk-Brown1815_0.2mm-5mmLenDash-0.5mmGapLine Colour Token: Dk-Brown1815

Description: Dk-Brown1815 0.2mm Dash Line (0.2mm wt, 5mm dash, 0.5mm gap)


L00177




L00178




F - 47

DN: 09-048 17 November 2009

L00185

Element Name: Dk-Brown1815_0.5mm-3-3-1.5-1.5-1.5-3DashLine Colour Token: Dk-Brown1815

Description: Dk-Brown1815 0.5mm Dashed line (0.5mm wt; Dash1: 3.0mm Gap1: 3.0mm; Dash2:1.5mm Gap2: 1.5mm; Dash3: 1.5mm Gap3: 3.0mm)



3rd Dash Length: 1.5mm 3rd Dash Spacing: 3.0mm

L00187

Element Name: Dk-Brown1815_0.3mm-3-3-1.5-1.5-1.5-3DashLine Colour Token: Dk-Brown1815

Description: Dk-Brown1815 0.3mm Dashed line (0.3mm wt; Dash1: 3.0mm Gap1: 3.0mm; Dash2: 1.5mm Gap2: 1.5mm; Dash3: 1.5mm Gap3: 3.0mm)

Line Weight: 0.3m Dash Length: 3.0mm Dash Spacing: 3.0mm


3rd Dash Length: 1.5mm 3rd Dash Spacing: 3.0mm

L00188




L00191




L00192




F - 48

DN: 09-048 17 November 2009

L00193

Element Name: Dk-Brown1815_0.25mm-3.0mmLenDash-0.5mmGapTickLine Colour Token: Dk-Brown1815




F - 49

DN: 09-048 17 November 2009

G-1

Annex G – Point Elements

Point Elements

Each of the point elements used in Annex A Symbols have been listed only one time in this Annex.

Point Elements

DN: 09-048 17 November 2009

Point - Complex

P00075

Element Name: Church Colour Token: Black

Description: A Black filled square with all sides 0.5mm long/wide with a cross staff attached on the top of the filled square and centred along the side where it is

attached

Miscellaneous Note: Bottom of stem touches the mid-point of the TOP edge of the square feature

Shape: Element Name: Black_0.2mmCross Element Reference: P00013 Element Type: Point - Shape

Simple Point: Element Name: Black_0.5mmSquareFilled Element Reference: P00050 Element Type: Point - Simple

P00076

Element Name: Mosque Colour Token: Black

Description: A Black filled square with all sides 0.5mm long/wide with a crescent staff attached on the top of the filled square and centred along the side where it is

attached


Shape: Element Name: Black_0.2mmCrescent Element Reference: P00014 Element Type: Point - Shape


P00077

Element Name: Synagogue Colour Token: Black

Description: A Black filled square with all sides 0.5mm long/wide with a Tee staff attached on the top of the filled square and centred along the side where it is

attached


Shape: Element Name: Black_0.2mmTee Element Reference: P00017 Element Type: Point - Shape


G - 2

DN: 09-048 17 November 2009

P00079

Element Name: Passenger-Terminal Colour Token: Black

Description: A filled square inside of a larger open square. The smaller filled square is centred along and touching one side of the open square

Miscellaneous Note: Point element "Black_SquareFilled" positioned inside the open square, touching side of open square that is parallel to railway track on the

same side as the terminal building

Shape: Element Name: Black_0.8mmSquareFilled Element Reference: P00006 Element Type: Point - Simple

Simple Point: Element Name:

Black_0.1mm-1.2mmwideSquareOpen

Element Reference: P00033 Element Type: Point - Simple

P00080

Element Name: Surface-Bunker Colour Token: Dk-Brown1815

Description: Dk-Brown1815 ticks radiating out from the top 1/2 of an ellipse. Beneath the ticks is a solid Dk-Brown1815 line along with a black headline and wing

ticks.

Miscellaneous Note: Wing tick ends touch the base of the "Dk-Brown1815_SurfaceBunker" point element

Shape: Element Name:

Dk-Brown1815_SurfaceBunker

Element Reference: P00021 Element Type: Point - Shape


Black_15mmHeadline&WingTicks


P00089

Element Name: Blue072_HospitalHelipad Colour Token: Blue072

Description: A Blue072 open square with H centred inside the square

Miscellaneous Note: Open Square with H centred inside it


Blue072_0.4mm-5.0mmwideSquareOpen


2nd Simple Point: Element Name: Blue072_H Element Reference: P00086 Element Type: Point - Simple

G - 3

DN: 09-048 17 November 2009

P00090

Element Name: Blue072_Helipad Colour Token: Blue072

Description: A Blue072 open circle with H centred inside the circle

Miscellaneous Note: Open Circle with H centred inside it

Simple Point: Element Name: Blue072_0.4mmOpenCircle Element Reference: P00088 Element Type: Point - Simple

2nd Simple Point: Element Name: Blue072_H Element Reference: P00086 Element Type: Point - Simple

P00096

Element Name: Black_HazardousRock(Covers/Uncovers) Colour Token: Black

Description: Combination of BlackStarburst(Rock) and BlackDotExterior(Rock)

Simple Point: Element Name: Black_DotExterior(Rock) Element Reference: P00093 Element Type: Point - Simple

2nd Simple Point: Element Name: Black_Starburst(Rock) Element Reference: P00095 Element Type: Point - Simple

P00104

Element Name: Black_Shrine Colour Token: Black

Description: A Combination of the 0.8mm open circle and the Point - Shape: Black_0.2mmCross. The stem of the Point - Shape is attached to the top of the open

circle.

Shape: Element Name: Black_0.2mmCross Element Reference: P00013 Element Type: Point - Shape

Simple Point: Element Name: Black_0.8mmCircleOpen Element Reference: P00103 Element Type: Point - Simple

P00125

Element Name: Cyan_PT_Ford Colour Token: Cyan

Description: Two Cyan "V" elements touch at their apexes.

Simple Point: Element Name: Cyan_0.3mm-0.7mmLenV Element Reference: P00062 Element Type: Point - Simple

2nd Simple Point: Element Name: Cyan_0.3mm-0.7mmLenV Element Reference: P00062 Element Type: Point - Simple

G - 4

DN: 09-048 17 November 2009

Point - Shape

P00001

Element Name: Black_PickAxeShovel Colour Token: Black


Miscellaneous Note: See Element: Black_PickAxeShovel in Annex H for detailed drawing instructions.


P00002

Element Name: Black_PickAxeShovel180 Colour Token: Black


Miscellaneous Note: See Element: Black_PickAxeShovel in Annex H for detailed drawing instructions. Image will need to be rotated 180 degrees from image

pictured in Annex H.



P00008

Element Name: Blue072_Obstruction Colour Token: Blue072


Miscellaneous Note: See Element: Blue072_Obstruction in Annex H for detailed drawing instructions.


P00009

Element Name: Black_CircleOpen Colour Token: Black

Description: Black open circle (Diameter = 1.0mm, lineweight of boundary around circumference - 0.15mm).

Miscellaneous Note: See Element: Black_CircleOpen in Annex H for detailed drawing instructions.

Detail: Black_CircleOpen

G - 5

DN: 09-048 17 November 2009

P00010

Element Name: Black_CircleOpenWithDot Colour Token: Black

Description: Black open circle with a smaller black filled circle/dot in its centre. Outer open circle has a diameter of 1.25mm and a lineweight of 0.15mm for the

boundary around the circumference. The inner dot has a diameter of 0.3mm and is filled.

Miscellaneous Note: See Element: Black_CircleOpenWithDot in Annex H for detailed drawing instructions.


P00011

Element Name: Black_0.2mmHospitalCrossOnStem Colour Token: Black

Description: Black filled circle (diameter of circle is 1.75mm) with a cross or plus centred in the circle. The cross/plus is paper white. The circle rests upon a "stem"

that is 0.6mm long with a lineweight of 0.25mm.

Miscellaneous Note: See Element: Black_0.2mmHospitalCrossOnStem in Annex H for detailed drawing instructions.

Detail: Black_0.2mmHospitalCrossOnStem

P00012

Element Name: Black_0.2mmHospitalCross Colour Token: Black

Description: Black filled circle (diameter of circle is 1.75mm) with a cross or plus centred in the circle. The cross/plus is paper white.

Miscellaneous Note: See Element: Black_0.2mmHospitalCross in Annex H for detailed drawing instructions.

Detail: Black_0.2mmHospitalCross

P00013

Element Name: Black_0.2mmCross Colour Token: Black


Miscellaneous Note: See Element: Black_0.2mmCross in Annex H for detailed drawing instructions.


P00014

Element Name: Black_0.2mmCrescent Colour Token: Black


Miscellaneous Note: See Element: Black_0.2mmCrescent in Annex H for detailed drawing instructions.


G - 6

DN: 09-048 17 November 2009

P00015

Element Name: Black_0.2mmMarabout Colour Token: Black

Description: Black crescent on a stem connected to a "non-filled" circle with a dot in the centre. The "non-filled" circle containing the dot is below the crescent with a

stem. Lineweight is 0.2mm. Dot diameter is 0.25mm. Stem height is 0.6mm.

Miscellaneous Note: See Element: Black_0.2mmMarabout in Annex H for detailed drawing instructions.

Detail: Black_0.2mmMarabout

P00016

Element Name: Black_0.2mmFlag Colour Token: Black

Description: Black flag on stem. The flag is 0.5mm tall on a 0.7mm tall stem. The flag is 0.7mm wide. The lineweight for the stem is 0.2mm.

Miscellaneous Note: See Element: Black_0.2mmFlag in Annex H for detailed drawing instructions.

Detail: Black_0.2mmFlag

P00017

Element Name: Black_0.2mmTee Colour Token: Black


Miscellaneous Note: See Element: Black_0.2mmTee in Annex H for detailed drawing instructions.


P00018

Element Name: Black_0.2mmTemple Colour Token: Black

Description: The box lineweight is 0.2mm. The small arc radii is 0.35mm. The large arc radius 0.43mm. The top of the symbol is horizontally symetrical. The box

is 1.18mm across.

Miscellaneous Note: See Element: Black_0.2mmTemple in Annex H for detailed drawing instructions.


P00019

Element Name: Black_0.2mmPagoda Colour Token: Black


Miscellaneous Note: See Element: Black_0.2mmPagoda in Annex H for detailed drawing instructions.


G - 7

DN: 09-048 17 November 2009

P00020

Element Name: Blue072_Pylon Colour Token: Blue072


Miscellaneous Note: See Element: Blue072_Pylon in Annex H for detailed drawing instructions.



P00021

Element Name: Dk-Brown1815_SurfaceBunker Colour Token: Dk-Brown1815

Description: A Dk-Brown1815 Surface Bunker

Miscellaneous Note: See Element: Dk-Brown1815_SurfaceBunker in Annex H for detailed drawing instructions.

Detail: Dk-Brown1815_SurfaceBunker

P00022

Element Name: Black_0.2mmCairn Colour Token: Black

Description: A Black Cairn (Line weight is 0.2 mm)

Miscellaneous Note: See Element: Black_0.2mmCairn in Annex H for detailed drawing instructions.

Detail: Black_0.2mmCairn

P00023

Element Name: Black_0.2mmU Colour Token: Black


Miscellaneous Note: See Element: Black_0.2mmU in Annex H for detailed drawing instructions.


P00025

Element Name: Blue072_Beacon Colour Token: Blue072


Miscellaneous Note: See Element: Blue072_Beacon in Annex H for detailed drawing instructions.


G - 8

DN: 09-048 17 November 2009

P00026

Element Name: Cyan_SpringPerennial Colour Token: Cyan

Description: A Cyan Spring (Perennial)

Miscellaneous Note: See Element: Cyan_SpringPerennial in Annex H for detailed drawing instructions.


Detail: Cyan_SpringPerennial

P00027

Element Name: Dk-Brown1815_Geothermal Colour Token: Dk-Brown1815

Description: A Dk-Brown1815 Geothermal

Miscellaneous Note: See Element: Dk-Brown1815_Geothermal in Annex H for detailed drawing instructions.


Detail: Dk-Brown1815_Geothermal

P00028

Element Name: Cyan_CircleFilledwithOpenOffsetCircleInside Colour Token: Cyan

Description: A Cyan filled circle (1.5 mm diameter) with an open circle offset inside of it

Miscellaneous Note: See Element: Cyan_CircleFilledwithOpenOffsetCircleInside in Annex H for detailed drawing instructions.

Orientation: Open circle points downstream

Detail: Cyan_CircleFilledwithOpenOffsetCircleInside

P00029

Element Name: Black_0.2mmMountainPass Colour Token: Black

Description: A pair of black parentheses which open away from each other.

Miscellaneous Note: See Element: Black_0.2mmMountainPass in Annex H for detailed drawing instructions.

Detail: Black_0.2mmMountainPass

G - 9

DN: 09-048 17 November 2009

P00030

Element Name: Green362_Tree Colour Token: Green362

Description: A Green362 Tree outline with 2 dots beside it

Miscellaneous Note: See Element: Green362_Tree in Annex H for detailed drawing instructions.

Detail: Green362_Tree

P00031

Element Name: Black_0.2mmStupa Colour Token: Black


Miscellaneous Note: See Element: Black_0.2mmStupa in Annex H for detailed drawing instructions.


P00032

Element Name: Cyan_SpringNonPerennial Colour Token: Cyan

Description: A Cyan Spring (Non-perennial)

Miscellaneous Note: See Element: Cyan_SpringNonPerennial in Annex H for detailed drawing instructions.


Detail: Cyan_SpringNonPerennial

P00040

Element Name: Cyan_CircleOpen Colour Token: Cyan

Description: A Cyan open circle

Miscellaneous Note: See Element: Cyan_CircleOpen in Annex H for detailed drawing instructions.

Detail: Cyan_CircleOpen

P00041

Element Name: Cyan_DotFilled Colour Token: Cyan

Description: A Cyan filled circle (or dot)

Miscellaneous Note: See Element: Cyan_DotFilled in Annex H for detailed drawing instructions.

Detail: Cyan_DotFilled

G - 10

DN: 09-048 17 November 2009

P00097

Element Name: Black_Doughnut Colour Token: Black

Description: A Black filled circle with a white hole cut out of the middle.

Miscellaneous Note: See Element: Black_Doughnut in Annex H for detailed drawing instructions.

Detail: Black_Doughnut

P00098

Element Name: Blue072_AnchorInsignia Colour Token: Blue072

Description: A Blue072 Anchor inside of a blue072 open circle

Miscellaneous Note: See Element: Blue072_AnchorInsignia in Annex H for detailed drawing instructions.

Detail: Blue072_AnchorInsignia

P00100

Element Name: Black_Building_Destroyed Colour Token: Black

Description: A Black building destroyed ("stair step" shape)

Miscellaneous Note: See Element: Black_Building_Destroyed in Annex H for detailed drawing instructions.

Detail: Black_Building_Destroyed

P00101

Element Name: Blue072_Multiple_VOs Colour Token: Blue072


Miscellaneous Note: See Element: Blue072_Multiple_VOs in Annex H for detailed drawing instructions.


P00108

Element Name: Black_Fortification Colour Token: Black

Description: A Black open square (0.1 mm wt, 0.8 mm long/wide) with 4 black 0.5 mm long ticks (0.1 mm wt) extending out from each corner of the square at an

angle of 45, 135, 225, or 315 degrees.

Miscellaneous Note: See Element: Black_Fortification in Annex H for detailed drawing instructions.

Detail: Black_Fortification

G - 11

DN: 09-048 17 November 2009

P00109

Element Name: Black_Building_Greenhouse Colour Token: Black

Description: A Open Rectangle with a cross hatch pattern inside

Miscellaneous Note: See Element: Black_Building_Greenhouse in Annex H for detailed drawing instructions.

Detail: Black_Building_Greenhouse

P00113

Element Name: Blue072_PT_LinearObstruction Colour Token: Blue072


Miscellaneous Note: See Element: Blue072_LinearObstruction in Annex H for detailed drawing instructions


P00118

Element Name: Black_School Colour Token: Black

Description: A Black square with a flag on top.

Miscellaneous Note: See Element Black_School in Annex H for detailed drawing instructions

Detail: Black_School

P00120

Element Name: Blue072_0.3mmDotFilled Colour Token: Blue072

Description: A Blue072 0.3mm diameter filled circle (or dot)

Miscellaneous Note: See Element Blue072_0.3mmDotFilled in Annex H for detailed drawing instructions

Detail: Blue072_0.3mmDotFilled

P00126

Element Name: Black_Cemetery_Unknown Colour Token: Black

Description: A Black "L" centred inside of a dashed black square.

Miscellaneous Note: See Element: Black_Cemetery_Unknown in Annex H for detailed drawing instructions

Detail: Black_Cemetery_Unknown

G - 12

DN: 09-048 17 November 2009

Point - Simple

P00006

Element Name: Black_0.8mmSquareFilled Colour Token: Black


Length: 0.8mm

P00007

Element Name: Cyan_0.8mmSquareFilled Colour Token: Cyan

Description: A Cyan filled square with all sides 0.8mm long/wide

Length: 0.8mm

P00024

Element Name: Black_0.1mm-0.8mmwideSquareOpen Colour Token: Black


Line Weight: 0.1mm Length: 0.8mm

P00033

Element Name: Black_0.1mm-1.2mmwideSquareOpen Colour Token: Black



P00034

Element Name: Black_0.1mmOpenCirclewithLine Colour Token: Black

Description: A Black open circle with line (Line weight is 0.1 mm)

Miscellaneous Note: Interior Line crosses through centre of circle: Line wt of line: 0.1mm Length of line: 1.5mm Orientation of line: at 45 degrees to South neatline

Diameter: 1.5mm

Line Weight: 0.1mm

G - 13

DN: 09-048 17 November 2009

P00035

Element Name: Black_0.1mmV Colour Token: Black


Miscellaneous Note: Angle between stems: 90 degrees



P00036

Element Name: Black_0.1mmY Colour Token: Black

Description: A Black "Y" (Line weight is 0.1 mm)

Miscellaneous Note: Angle between V stems: 90 degrees. All line lengths are the same (0.8mm). Symbol is not rotated towards inside of cave because Angle of

Orientation (AOO) is not available on this feature.


P00037

Element Name: Black_15mmHeadline&WingTicks Colour Token: Black

Description: A Black 0.15mm lineweight line that is 2.5mm long. At each end of the 2.5mm long line there is a Black 0.15mm lineweight line that is 0.8mm long

attached at a 45 degree angle

Miscellaneous Note: Wing tick 45 degree angle outward from headline ends.

Headline: Line weight: 0.15mm

Length: 2.500mm

Wing Tick: Line weight: 0.15mm

Length: 0.800mm

P00038

Element Name: Black_0.15mm-0.75mmLenTick Colour Token: Black




G - 14

DN: 09-048 17 November 2009

P00039

Element Name: Black_0.15mm-0.75mmLenV Colour Token: Black





P00042

Element Name: Black_0.15mm-0.75mmLenWingTick Colour Token: Black


Miscellaneous Note: angle depends on which end of the feature the ticks are placed



P00043

Element Name: Black_0.15mm-1mmLenTick Colour Token: Black




P00044





G - 15

DN: 09-048 17 November 2009

P00045

Element Name: Black_0.2mm-0.7mmLenV Colour Token: Black





P00046

Element Name: Black_0.2mm-1.3mmLenX Colour Token: Black

Description: Two Black lines (each 0.2mm lineweight, 1.3mm length) intersect at a 45 degree angle to form an "X". Intersection is at the centre of each of the 2 line

segments.

Orientation: X lines of symbol are 45 degree angles and are centred one to another


P00047

Element Name: Black_0.25mmDotFilled Colour Token: Black


Diameter: 0.25mm

P00048

Element Name: Black_0.3mmCircleOpen Colour Token: Black

Description: An open circle (line weight 0.3mm) whose diameter depends upon the width of the feature.

Diameter: variable depending on the width of

the feature

Line Weight: 0.3mm

P00049



Diameter: 0.5mm

G - 16

DN: 09-048 17 November 2009

P00050



Length: 0.5mm

P00051

Element Name: Black_0.5mm-1.5LenLine Colour Token: Black




P00053



Diameter: 0.8mm

P00055

Element Name: Cyan_0.1mm-0.5mmLenTick Colour Token: Cyan




P00056

Element Name: Cyan_0.15mm-0.6mmLenTickCircle Colour Token: Cyan

Description: Cyan ticks (0.15mm lineweight, 0.6mm long) radiating out from an imaginary circle (diameter 1.500mm)

Miscellaneous Note: Tick Interval: 0.5mm radiating from centre of circular area. Tick placement: clockwise around an imaginary circle diameter of 1.5mm starting at

the 0 degree position in 45 degree increments



G - 17

DN: 09-048 17 November 2009

P00057

Element Name: Cyan_0.15mmCircleOpen Colour Token: Cyan

Description: A Cyan open circle (Line weight is 0.15 mm; Diameter is 1.0 mm)

Diameter: 1.0mm

Line Weight: 0.15mm

P00058

Element Name: Cyan_0.2mm-0.7mmLenV Colour Token: Cyan





P00059

Element Name: Cyan_0.2mm-1mmLenV Colour Token: Cyan

Description: Two Cyan lines (each 0.2mm lineweight 1.0mm length) intersect at a 90 degree angle. The intersection occurs at the one end of each of the line

segments to form a right angle.


Orientation: Apex points upstream and connects to drainage feature at apex


P00060

Element Name: Cyan_0.2mm-1.3mmLenLine Colour Token: Cyan

Description: A Cyan 0.2mm lineweight line that is 1.3mm long.



P00061

Element Name: Cyan_0.2mm-1.5mmLenLine Colour Token: Cyan




G - 18

DN: 09-048 17 November 2009

P00062

Element Name: Cyan_0.3mm-0.7mmLenV Colour Token: Cyan





P00064

Element Name: Dk-Brown1815_0.1mmOpenCirclewithTicks Colour Token: Dk-Brown1815

Description: A Dk-Brown1815 0.1mm lineweight circle with a diameter of 1.0mm. Radiating out from the circle are alternating long (1.0mm long) and short (0.5mm)

ticks every 45 degrees

Miscellaneous Note: Ticks alternate in length (short tick 0.5mm length, long tick 1.000mm length) starting with a long tick at the top, each at 45 degree angle from

the last. Each tick connects with the outside of the circle radiating outwards.

Diameter: 1.0mm (circle)

Line Weight: 0.1mm Length: Long Tick: 1.0mm; Short

Tick: 0.5mm

P00065

Element Name: Dk-Brown1815_0.1mm-0.5mmLenTick Colour Token: Dk-Brown1815




P00066

Element Name: Dk-Brown1815_0.15mmTickCircle Colour Token: Dk-Brown1815

Description: Dk-Brown1815 ticks (0.15mm lineweight, 0.6mm long) radiating out from an imaginary circle (diameter 1.5mm)

Miscellaneous Note: Tick Interval: 0.5mm radiating from the centre of the circular area Tick Placement: Clockwise around an imaginary circle diameter of 1.5mm

starting at the 0 degrees position in 45 degree increments.



G - 19

DN: 09-048 17 November 2009

P00067





P00068





P00069





P00070





P00071

Element Name: Dk-Brown1815_0.25mmTickCircle Colour Token: Dk-Brown1815

Description: A set of Dk-Brown1815 ticks radiating out from a circle. The circle is not portrayed just a reference for building the symbol.

Miscellaneous Note: Centre (circle) diameter: 0.244mm Tick Placement: in 60 degree increments clockwise starting at 30 degrees from North. Overall Tick

diameter: 1.44mm

Diameter: 0.244mm


G - 20

DN: 09-048 17 November 2009

P00072

Element Name: Black_0.1mmTick-Entrance/Exit Colour Token: Black

Description: Black Entrance/Exit with 0.1mm lineweight wingtick and 0.2mm headline

Miscellaneous Note: Wing tick placed at 45 degree angle outward from centre of the headline end

Headline: Line weight: 0.2mm Length: 2.0mm Wing Tick: Line weight: 0.1mm Length: 0.6mm

P00073

Element Name: Black_0.2mmTick-Entrance/Exit Colour Token: Black

Description: A Black 0.2mm lineweight line 2.0mm long. At each endpoint is a Black wingtick 0.2mm lineweight line 0.6mm long. The wingtick is attached to the

2.0mm line at a 45 degree angle.



P00074

Element Name: Cyan0.2mmTick-Entrance/Exit Colour Token: Cyan

Description: A Cyan 0.2mm lineweight line 2.0mm long. At each endpoint is a Cyan wingtick 0.2mm lineweight line 0.6mm long. The wingtick is attached to the

2.0mm line at a 45 degree angle.



P00081



Diameter: 0.64mm

P00082



Miscellaneous Note: Circle is filled

Diameter: 0.4mm

G - 21

DN: 09-048 17 November 2009

P00083


Description: A Black line segment with line weight of 0.250mm and a length of 1.5mm.

Orientation: 90 degrees to line and centred on the line


P00084

Element Name: Black_PeatCutting Colour Token: Black

Description: Peat Cutting Pattern

Miscellaneous Note: Five (5) rectangles, two (2) rows staggered, three (3) on the bottom row, two(2) on top. Width 1.5mm Height 1.0mm

Line Weight: 0.1mm

P00086

Element Name: Blue072_H Colour Token: Blue072


Miscellaneous Note: Two (2) vertical lines with a lineweight of 0.4mm and a height of 3.0mm connected by a horizontal line with a lineweight of 0.4mm and a length

of 2.0mm to form a capital letter 'H'

Line Weight: 0.4mm

P00087

Element Name: Blue072_0.4mm-5.0mmwideSquareOpen Colour Token: Blue072


Miscellaneous Note: Open Square with lineweight of 0.4mm and sides of the square are 5.0mm long


P00088

Element Name: Blue072_0.4mmOpenCircle Colour Token: Blue072

Description: A Blue072 0.4mm lineweight open circle with a 5.0mm diameter

Miscellaneous Note: Open Circle with lineweight of 0.4mm and diameter of 5.0mm

Diameter: 5.0mm

Line Weight: 0.4mm

G - 22

DN: 09-048 17 November 2009

P00093

Element Name: Black_DotExterior(Rock) Colour Token: Black

Description: Black dots (diameter 0.25mm) are placed around a circle (diameter 3.0mm) centre of dots every 36 degrees starting 18 degrees east of north.

Miscellaneous Note: There are Black "dots" (diameter of dots 0.25mm) placed around the perimeter of a circle (3.0mm in diameter), the centre of the dots are every

36 degrees starting 18 degrees east of north.

Diameter: 0.25mm

P00095

Element Name: Black_Starburst(Rock) Colour Token: Black

Description: Lines (lineweight 0.1mm, length 1.5mm) oriented 60 degrees apart, starting at 30 degrees from North.

Miscellaneous Note: Lines (lineweight 0.1mm, length 1.5mm) oriented 60 degrees apart, starting at 30 degrees from North.


P00099

Element Name: Dk-Brown1815_0.5mmSquareFilled Colour Token: Dk-Brown1815

Description: A Dk-Brown1815 filled square with all sides 0.5mm long/wide

Length: 0.5mm

P00103

Element Name: Black_0.8mmCircleOpen Colour Token: Black

Description: A Black 0.8mm diameter open circle with a line weight of 0.15mm

Diameter: 0.8mm

Line Weight: 0.15mm

P00105

Element Name: Blue072_Sawtooth_Left Colour Token: Blue072


Orientation: 60 degrees


G - 23

DN: 09-048 17 November 2009

P00106

Element Name: Blue072_Sawtooth_Right Colour Token: Blue072


Orientation: 120 degrees


P00110

Element Name: Blue072_0.2mm-1.0mmwideSquareOpen Colour Token: Blue072



P00111

Element Name: Green362_0.1mmOpenCircle Colour Token: Green362

Description: A Green362 0.1mm wt. 0.4mm diameter open circle

Diameter: 0.4mm

Line Weight: 0.1mm

P00123



Length: 1.2mm

P00124

Element Name: Black_0.1mm_V Colour Token: Black




G - 24

DN: 09-048 17 November 2009

H-1

Annex H – Detailed Drawing Instructions (normative)

Detailed Drawing Instructions

This Annex contains detailed drawing instructions for each of the point elements used in Annex A Symbols which could not be readily explained in a small set of parameters. The pictures shown in this Annex are not to scale, but have, at times, been enlarged to make it easier to view the drawing.

Detailed Drawing Instructions

DN: 09-048 17 November 2009

A Black Cairn (Line weight is 0.2

mm)

P00022

Point - Shape

Element Reference:

Element Name:

Element Type:

Description:

Black_0.2mmCairn

H - 2

DN: 09-048 17 November 2009

Black crescent on a stem. Height of

Crescent is 0.45mm. Height of stem

is 0.65mm. Lineweights are 0.2mm.

P00014

Point - Shape

Element Reference:

Element Name:

Element Type:

Description:

Black_0.2mmCrescent

Black cross (total height is 1.10 mm

and total width is 0.60 mm. The

cross piece (horizontal piece) is 0.60

mm long. Lineweight is 0.2mm.

P00013

Point - Shape

Element Reference:

Element Name:

Element Type:

Description:

Black_0.2mmCross

H - 3

DN: 09-048 17 November 2009

Black flag on stem. The flag is

0.5mm tall on a 0.7mm tall stem.

The flag is 0.7mm wide. The

lineweight for the stem is 0.2mm.

P00016

Point - Shape

Element Reference:

Element Name:

Element Type:

Description:

Black_0.2mmFlag

Black filled circle (diameter of circle

is 1.75mm) with a cross or plus

centred in the circle. The cross/plus

is paper white.

P00012

Point - Shape

Element Reference:

Element Name:

Element Type:

Description:

Black_0.2mmHospitalCross

H - 4

DN: 09-048 17 November 2009

Black filled circle (diameter of circle

is 1.75mm) with a cross or plus

centred in the circle. The cross/plus

is paper white. The circle rests

upon a "stem" that is 0.6mm long

with a lineweight of 0.25mm.

P00011

Point - Shape

Element Reference:

Element Name:

Element Type:

Description:

Black_0.2mmHospitalCrossOnStem

H - 5

DN: 09-048 17 November 2009

Black crescent on a stem connected

to a "non-filled" circle with a dot in

the centre. The "non-filled" circle

containing the dot is below the

crescent with a stem. Lineweight is

0.2mm. Dot diameter is 0.25mm.

Stem height is 0.6mm.

P00015

Point - Shape

Element Reference:

Element Name:

Element Type:

Description:

Black_0.2mmMarabout

H - 6

DN: 09-048 17 November 2009

A pair of black parentheses which

open away from each other.

P00029

Point - Shape

Element Reference:

Element Name:

Element Type:

Description:

Black_0.2mmMountainPass

H - 7

DN: 09-048 17 November 2009

The box lineweight is 0.2mm. The

arc radii is 0.44mm. The top is

horizontally symetrical. The box is

0.8mm across and 0.7mm high.

P00019

Point - Shape

Element Reference:

Element Name:

Element Type:

Description:

Black_0.2mmPagoda

H - 8

DN: 09-048 17 November 2009

A Black Stupa (Line weight is 0.2

mm)

P00031

Point - Shape

Element Reference:

Element Name:

Element Type:

Description:

Black_0.2mmStupa

A black "T" (capital T). The "T" is

0.60 mm across and 0.85mm tall.

The lineweight is 0.2mm.

P00017

Point - Shape

Element Reference:

Element Name:

Element Type:

Description:

Black_0.2mmTee

H - 9

DN: 09-048 17 November 2009

The box lineweight is 0.2mm. The

small arc radii is 0.35mm. The large

arc radius 0.43mm. The top of the

symbol is horizontally symetrical.

The box is 1.18mm across.

P00018

Point - Shape

Element Reference:

Element Name:

Element Type:

Description:

Black_0.2mmTemple

A Black "U" (Line weight is 0.2 mm)

P00023

Point - Shape

Element Reference:

Element Name:

Element Type:

Description:

Black_0.2mmU

H - 10

DN: 09-048 17 November 2009

A Black building destroyed ("stair

step" shape)

P00100

Point - Shape

Element Reference:

Element Name:

Element Type:

Description:

Black_Building_Destroyed

A Open Rectangle with a cross

hatch pattern inside

P00109

Point - Shape

Element Reference:

Element Name:

Element Type:

Description:

Black_Building_Greenhouse

H - 11

DN: 09-048 17 November 2009

A Black "L" centred inside of a

dashed black square.

P00126

Point - Shape

Element Reference:

Element Name:

Element Type:

Description:

Black_Cemetery_Unknown

Black open circle (Diameter =

1.0mm, lineweight of boundary

around circumference - 0.15mm).

P00009

Point - Shape

Element Reference:

Element Name:

Element Type:

Description:

Black_CircleOpen

H - 12

DN: 09-048 17 November 2009

Black open circle with a smaller

black filled circle/dot in its centre.

Outer open circle has a diameter of

1.25mm and a lineweight of 0.15mm

for the boundary around the

circumference. The inner dot has a

diameter of 0.3mm and is filled.

P00010

Point - Shape

Element Reference:

Element Name:

Element Type:

Description:

Black_CircleOpenWithDot

A Black filled circle with a white hole

cut out of the middle.

P00097

Point - Shape

Element Reference:

Element Name:

Element Type:

Description:

Black_Doughnut

H - 13

DN: 09-048 17 November 2009

A Black open square (0.1 mm wt,

0.8 mm long/wide) with 4 black 0.5

mm long ticks (0.1 mm wt)

extending out from each corner of

the square at an angle of 45, 135,

225, or 315 degrees.

P00108

Point - Shape

Element Reference:

Element Name:

Element Type:

Description:

Black_Fortification

This point element depicts a crossed

black pickaxe and shovel

P00001

Point - Shape

Element Reference:

Element Name:

Element Type:

Description:

Black_PickAxeShovel

H - 14

DN: 09-048 17 November 2009

A Black square with a flag on top.

P00118

Point - Shape

Element Reference:

Element Name:

Element Type:

Description:

Black_School

A Blue072 0.3mm diameter filled

circle (or dot)

P00120

Point - Shape

Element Reference:

Element Name:

Element Type:

Description:

Blue072_0.3mmDotFilled

H - 15

DN: 09-048 17 November 2009

A Blue072 Anchor inside of a

blue072 open circle

P00098

Point - Shape

Element Reference:

Element Name:

Element Type:

Description:

Blue072_AnchorInsignia

H - 16

DN: 09-048 17 November 2009

A Blue072 5-pointed filled star with

an open circle / hole at the centre of

the 5-pointed star

P00025

Point - Shape

Element Reference:

Element Name:

Element Type:

Description:

Blue072_Beacon

H - 17

DN: 09-048 17 November 2009

A Blue072 shape for VOs which are

in congested areas or areas of

overprinting

P00101

Point - Shape

Element Reference:

Element Name:

Element Type:

Description:

Blue072_Multiple_VOs

H - 18

DN: 09-048 17 November 2009

A Blue072 vertical obstruction

P00008

Point - Shape

Element Reference:

Element Name:

Element Type:

Description:

Blue072_Obstruction

H - 19

DN: 09-048 17 November 2009

A Blue072 Point Linear Obstruction

(Multiple vertical obstruction symbol

with a zigzag line above it)

P00113

Point - Shape

Element Reference:

Element Name:

Element Type:

Description:

Blue072_PT_LinearObstruction

H - 20

DN: 09-048 17 November 2009

A Blue072 pylon

P00020

Point - Shape

Element Reference:

Element Name:

Element Type:

Description:

Blue072_Pylon

H - 21

DN: 09-048 17 November 2009

A Cyan filled circle (1.5 mm

diameter) with an open circle offset

inside of it

P00028

Point - Shape

Element Reference:

Element Name:

Element Type:

Description:

Cyan_CircleFilledwithOpenOffsetCircleInside

A Cyan open circle

P00040

Point - Shape

Element Reference:

Element Name:

Element Type:

Description:

Cyan_CircleOpen

H - 22

DN: 09-048 17 November 2009

A Cyan filled circle (or dot)

P00041

Point - Shape

Element Reference:

Element Name:

Element Type:

Description:

Cyan_DotFilled

A Cyan Spring (Non-perennial)

P00032

Point - Shape

Element Reference:

Element Name:

Element Type:

Description:

Cyan_SpringNonPerennial

H - 23

DN: 09-048 17 November 2009

A Cyan Spring (Perennial)

P00026

Point - Shape

Element Reference:

Element Name:

Element Type:

Description:

Cyan_SpringPerennial

H - 24

DN: 09-048 17 November 2009

A Dk-Brown1815 Geothermal

P00027

Point - Shape

Element Reference:

Element Name:

Element Type:

Description:

Dk-Brown1815_Geothermal

H - 25

DN: 09-048 17 November 2009

A Dk-Brown1815 Surface Bunker

P00021

Point - Shape

Element Reference:

Element Name:

Element Type:

Description:

Dk-Brown1815_SurfaceBunker

H - 26

DN: 09-048 17 November 2009

A Green362 Tree outline with 2 dots

beside it

P00030

Point - Shape

Element Reference:

Element Name:

Element Type:

Description:

Green362_Tree

H - 27

DN: 09-048 17 November 2009

I-1

Annex I – Patterns

Patterns

Samples of the Patterns referenced in the MGCP Symbology Standard Annex A are provided in this annex. The Element Name and Element Reference provide the link to Annex A MGCP Symbols. Since the area patterns were inherited from the MIL-STD-2410 document, a historical reference has been made in the document for each of the patterns in Annex I to identify its original pattern number in the MIL-STD-2410 document. For example, the field “MIL-STD-2402 Reference: Area Pattern #108” means that the area pattern was originally AP-108 in the MIL-STD-2410 document dated 31 January 1995. The reader may wish to reference the listed area pattern in the MIL-STD-2410 dated 31 January 1995, for additional information.

DN: 09-048 17 November 2009

Patterns

Element Reference:

Element Name:

Element Type:

Description:

Black_PeateryFill

A00001

Area - Pattern

Black staggered brick fill pattern

MIL-STD-2410

Reference: Area Pattern #129

I - 2

Patterns

DN: 09-048 17 November 2009

Element Reference:

Element Name:

Element Type:

Description:

Black_ShantyTownFill

A00014

Area - Pattern

Black Shantytown Fill

MIL-STD-2410


Element Reference:

Element Name:

Element Type:

Description:

Cyan_DryDrainageFill

A00020

Area - Pattern

Cyan Dry Drainage Fill

MIL-STD-2410


I - 3

Patterns

DN: 09-048 17 November 2009

Element Reference:

Element Name:

Element Type:

Description:

Cyan_GlacierFill

A00017

Area - Pattern

Cyan Glacier Fill

MIL-STD-2410


Element Reference:

Element Name:

Element Type:

Description:

Cyan_LP15Fill

A00021

Area - Pattern

Cyan Diagonal Line Fill - 35% coverage, 40L, 45 degree

angle lines.

MIL-STD-2410

Reference: Line Pattern #15

I - 4

Patterns

DN: 09-048 17 November 2009

Element Reference:

Element Name:

Element Type:

Description:

Cyan_LSIFill

A00015

Area - Pattern

Cyan Land Subject to Inundation Fill

MIL-STD-2410


Element Reference:

Element Name:

Element Type:

Description:

Cyan_RiceFill

A00019

Area - Pattern

Cyan Rice Fill

MIL-STD-2410


I - 5

Patterns

DN: 09-048 17 November 2009

Element Reference:

Element Name:

Element Type:

Description:

Cyan_SabkhaFill

A00016

Area - Pattern

Cyan Sabkha Fill

MIL-STD-2410


Element Reference:

Element Name:

Element Type:

Description:

Cyan_SaltEvaporatorFill

A00044

Area - Pattern

A grid pattern comprised of 1.5mm x 1.5mm squares. Grid

alignment is parallel to longest axis of the perimeter line and

centred.

MIL-STD-2410

Reference: Lineweight: 0.2mm; Length: 1.5mm; Grid squares: 1.5mm x

1.5mm; Grid alignment parallel to longest axis of perimeter

line and centred

I - 6

Patterns

DN: 09-048 17 November 2009

Element Reference:

Element Name:

Element Type:

Description:

Cyan_SwampFill

A00018

Area - Pattern

Cyan Swamp Fill

MIL-STD-2410


Element Reference:

Element Name:

Element Type:

Description:

Dk-Brown1815_CrescentDunesFill

A00031

Area - Pattern

Dk-Brown1815 Crescent Sand Dunes Fill

MIL-STD-2410


I - 7

Patterns

DN: 09-048 17 November 2009

Element Reference:

Element Name:

Element Type:

Description:

Dk-Brown1815_DistortedSurfaceFill

A00030

Area - Pattern

Dk-Brown1815 Distorted Surface Fill

MIL-STD-2410


Element Reference:

Element Name:

Element Type:

Description:

Dk-Brown1815_DomeDunesFill

A00042

Area - Pattern

Dk-Brown1815 Dome Sand Dunes Fill

MIL-STD-2410


I - 8

Patterns

DN: 09-048 17 November 2009

Element Reference:

Element Name:

Element Type:

Description:

Dk-Brown1815_LinearDunesFill

A00043

Area - Pattern

DK-Brown1815 Linear Sand Dunes Fill

MIL-STD-2410


Element Reference:

Element Name:

Element Type:

Description:

Dk-Brown1815_MoraineFill

A00022

Area - Pattern

Dk-Brown1815 Moraine Fill

MIL-STD-2410


I - 9

Patterns

DN: 09-048 17 November 2009

Element Reference:

Element Name:

Element Type:

Description:

Dk-Brown1815_RippleDunesFill

A00032

Area - Pattern

Dk-Brown1815 Ripple Sand Dunes Fill

MIL-STD-2410


Element Reference:

Element Name:

Element Type:

Description:

Dk-Brown1815_SandandGravelFill

A00036

Area - Pattern

Dk-Brown1815 Sand and Gravel Fill

MIL-STD-2410


I - 10

Patterns

DN: 09-048 17 November 2009

Element Reference:

Element Name:

Element Type:

Description:

Dk-Brown1815_SandFill

A00035

Area - Pattern

Dk-Brown1815 Sand Fill

MIL-STD-2410


Element Reference:

Element Name:

Element Type:

Description:

Dk-Brown1815_StarDunesFill

A00033

Area - Pattern

Dk-Brown1815 Star Sand Dunes Fill

MIL-STD-2410


I - 11

Patterns

DN: 09-048 17 November 2009

Element Reference:

Element Name:

Element Type:

Description:

Dk-Brown1815_TransverseDunesFill

A00034

Area - Pattern

Dk-Brown1815 Transverse Sand Dunes Fill

MIL-STD-2410


Element Reference:

Element Name:

Element Type:

Description:

Green362_CaneFill

A00050

Area - Pattern

Green362 Cane Fill

MIL-STD-2410


I - 12

Patterns

DN: 09-048 17 November 2009

Element Reference:

Element Name:

Element Type:

Description:

Green362_DeciduousTreeFill

A00011

Area - Pattern

Green362 DeciduousTreeFill area pattern

MIL-STD-2410


Element Reference:

Element Name:

Element Type:

Description:

Green362_EvergreenTreeFill

A00012

Area - Pattern

Green362 EvergreenTreeFill area pattern

MIL-STD-2410


I - 13

Patterns

DN: 09-048 17 November 2009

Element Reference:

Element Name:

Element Type:

Description:

Green362_GrasslandFill

A00026

Area - Pattern

Green362 Grassland Fill

MIL-STD-2410


Element Reference:

Element Name:

Element Type:

Description:

Green362_MangroveFill

A00025

Area - Pattern

Green362 Mangrove Fill area pattern

MIL-STD-2410


I - 14

Patterns

DN: 09-048 17 November 2009

Element Reference:

Element Name:

Element Type:

Description:

Green362_MixedTreeFill

A00013

Area - Pattern

Green362 MixedTreeFill area pattern

MIL-STD-2410


Element Reference:

Element Name:

Element Type:

Description:

Green362_NipaPalmFill

A00024

Area - Pattern

Green362 Nipa Palm Fill area pattern

MIL-STD-2410


I - 15

Patterns

DN: 09-048 17 November 2009

Element Reference:

Element Name:

Element Type:

Description:

Green362_OrchardPlantationFill

A00028

Area - Pattern

Green362 Orchard/Plantation Fill

MIL-STD-2410


Element Reference:

Element Name:

Element Type:

Description:

Green362_ScrubThicketFill

A00027

Area - Pattern

Green362 Scrub/Thicket Fill

MIL-STD-2410


I - 16

Patterns

DN: 09-048 17 November 2009

Element Reference:

Element Name:

Element Type:

Description:

Green362_VineyardHopFill

A00029

Area - Pattern

Green362 Vineyard/Hops Fill

MIL-STD-2410


Element Reference:

Element Name:

Element Type:

Description:

Woodland-ScatteredTrees

A00047

Area - Pattern

Green362 Woodland Scattered Trees Fill

MIL-STD-2410


I - 17

DN: 09-048 17 November 2009

J-1

Annex J - Conformance (normative)

Conformance

For symbols to conform to this standard they must meet the following criteria.

• Symbols shall be “visually equivalent” to those symbol graphics in the standard. Visually equivalent symbols are those that would be recognized by users as representing the same feature or information. Symbols on actual maps shall conform to the delineation of the geospatial feature (area, line, point). Shapes shown in this standard are representative examples only. All labels shall be shown in accordance with this standard. Conditional attribute labels will be filled in with the applicable information associated with the feature instance rather than the generic attribute labels shown in the standard.

• Colours on printed maps shall be in accordance with Annex B – Colour.

DN: 09-048 17 November 2009

K-1

Annex K – Additional Information

Additional information

This portrayal standard was prepared by the Defence Geospatial Information Working Group (DGIWG) for Multinational Geospatial Co-production Program (MGCP) member nations, and other NATO members who intend to generate map products from MGCP data. Recommendations for improving this standard should be sent to the DGIWG Technical Coordinator for consideration.

Index

Index (sorted by Feature Name)

DN: 09-048 17 November 2009

Feature Name Feature Code Symbol Page Label Page

A - 2 C - 2Administrative BoundaryAdministrative Boundary (Line)

A - 5 C - 3Administrative DivisionAdministrative Division (Area)

A - 6 C - 3AGB005Aerodrome (Area)

A - 7 C - 4PGB220Air Obstruction (Point)

A - 8 C - 4LGB050Aircraft Revetment (Line)

A - 9 C - 4PGB010Airport Navigation Lights (Point)

A - 10 C - 4AAK030Amusement Park (Area)

A - 10 N/AAGB015Apron (Area)

A - 11 C - 5LBH010Aqueduct (Line)

A - 15 N/APBH010Aqueduct (Point)

A - 16 C - 6AAL012Archaeological Site (Area)

A - 16 N/APAL012Archaeological Site (Point)

A - 17 C - 6ABA050Beach (Area)

A - 18 C - 6PBA050Beach (Point)

A - 19 C - 7ABB190Berthing Structure (Area)

A - 20 C - 8LBB190Berthing Structure (Line)

A - 21 C - 8ABH015Bog (Area)

A - 22 C - 9ABB041Breakwater (Area)

A - 23 C - 9LBB041Breakwater (Line)

A - 24 C - 10LAQ040Bridge (Line)

A - 27 C - 11AAL015Building (Area)

A - 32 C - 14PAL015Building (Point)

A - 42 C - 18AAL020Built-Up Area (Area)

A - 44 C - 18PAL020Built-Up Area (Point)

A - 45 C - 19LAT041Cableway (Line)

A - 47 N/APAL025Cairn (Point)

A - 47 C - 18AAK060Camp-site (Area)

A - 48 C - 19ABH020Canal (Area)

L - 1


DN: 09-048 17 November 2009

A - 49 C - 19LBH020Canal (Line)

A - 50 N/AAEC010Cane (Area)

A - 51 C - 19LAP010Cart Track (Line)

A - 51 C - 19PAC020Catalytic Cracker (Point)

A - 52 C - 20LAQ064Causeway (Line)

A - 52 C - 20PDB030Cave (Point)

A - 53 C - 21AAL030Cemetery (Area)

A - 55 C - 21PAL030Cemetery (Point)

A - 58 C - 22PAH070Checkpoint (Point)

A - 58 C - 22AAJ010Circular Irrigation System (Area)

A - 59 N/APBI010Cistern (Point)

A - 59 C - 23AEC040Cleared Way (Area)

A - 60 C - 23LAT060Communication Line (Line)

A - 61 C - 23AAT050Communication Station (Area)

A - 62 C - 24PAT080Communication Tower (Point)

A - 64 C - 25PAQ060Control Tower (Point)

A - 65 C - 25LAF020Conveyor (Line)

A - 66 C - 26PAF030Cooling Tower (Point)

A - 68 C - 27PAF040Crane (Point)

A - 70 C - 27AEA010Crop Land (Area)

A - 71 N/ACulvertCulvert (Point)

A - 72 N/ALDB070Cut (Line)

A - 75 N/ALDB071Cut Line (Line)

A - 77 C - 28ABI020Dam (Area)

A - 78 C - 28LBI020Dam (Line)

A - 79 C - 28PBI020Dam (Point)

A - 81 C - 29PAT010Dish Aerial (Point)

A - 83 C - 30AAB000Disposal Site (Area)

A - 84 C - 30ABH030Ditch (Area)

A - 85 N/ALBH030Ditch (Line)

L - 2


DN: 09-048 17 November 2009

A - 86 N/AABB090Dry Dock (Area)

A - 87 C - 31Elevation ContourElevation Contour (Line)

A - 103 C - 32ADB090Embankment (Area)

A - 105 C - 32LDB090Embankment (Line)

A - 108 N/APAQ090Entrance and/or Exit (Point)

A - 109 C - 33AAA010Extraction Mine (Area)

A - 110 C - 33PAA010Extraction Mine (Point)

A - 112 C - 33AAK090Fairground (Area)

A - 112 N/ALAL070Fence (Line)

A - 113 C - 34LAQ070Ferry Crossing (Line)

A - 113 C - 34PAQ070Ferry Crossing (Point)

A - 114 C - 34PAF070Flare Pipe (Point)

A - 116 N/ALBH070Ford (Line)

A - 117 N/APBH070Ford (Point)

A - 117 N/AAEC060Forest Clearing (Area)

A - 118 C - 35AAH050Fortification (Area)

A - 118 N/APAH050Fortification (Point)

A - 119 C - 35LDB110Geologic Fault (Line)

A - 120 C - 35ADB115Geothermal Outlet (Area)

A - 120 N/APDB115Geothermal Outlet (Point)

A - 121 N/AABJ030Glacier (Area)

A - 121 C - 35AAK100Golf Course (Area)

A - 122 C - 36AAM030Grain Elevator (Area)

A - 122 C - 36PAM030Grain Elevator (Point)

A - 124 N/AAAM020Grain Storage Structure (Area)

A - 124 C - 37PAM020Grain Storage Structure (Point)

A - 126 N/AAEB010Grassland (Area)

A - 127 C - 37ABB043Groin (Area)

A - 128 C - 37LBB043Groin (Line)

A - 128 C - 37ABB005Harbour (Area)

L - 3


DN: 09-048 17 November 2009

A - 129 C - 38PBD130Hazardous Rock (Point)

A - 130 C - 38AAD050Heating Facility (Area)

A - 130 C - 38PAD050Heating Facility (Point)

A - 131 N/ALEA020Hedgerow (Line)

A - 132 C - 39PGB030Helipad (Point)

A - 133 C - 39AGB035Heliport (Area)

A - 134 C - 39AAJ030Holding Pen (Area)

A - 134 N/ALBJ040Ice Cliff (Line)

A - 135 N/APBJ060Ice Peak (Point)

A - 136 C - 39LAQ075Ice Route (Line)

A - 136 C - 39International Date LineInternational Date Line (Line)

A - 137 C - 40ABA030Island (Area)

A - 138 C - 40ABH080Lake (Area)

A - 140 N/AABH090Land Subject to Inundation (Area)

A - 141 N/ALBA010Land Water Boundary (Line)

A - 142 C - 41PGB040Launch Pad (Point)

A - 143 C - 41PBC050Lighthouse (Point)

A - 145 C - 42ABI030Lock (Area)

A - 146 C - 42LBI030Lock (Line)

A - 147 C - 42PBI030Lock (Point)

A - 147 C - 42ABH050Marine Farm (Area)

A - 148 C - 42Maritime AreaMaritime Area (Line)

A - 148 C - 42PBB155Maritime Signal Station (Point)

A - 149 N/AAED010Marsh (Area)

A - 150 C - 43PAL130Memorial Monument (Point)

A - 152 C - 44ASU001Military Installation (Area)

A - 152 C - 44PSU001Military Installation (Point)

A - 153 C - 45AAM040Mineral Pile (Area)

A - 153 C - 45PAM040Mineral Pile (Point)

A - 155 C - 46PAQ110Mooring Mast (Point)

L - 4


DN: 09-048 17 November 2009

A - 156 C - 46ABJ020Moraine (Area)

A - 157 C - 46PDB150Mountain Pass (Point)

A - 157 C - 47PZD040Named Location (Point)

A - 158 C - 47PBH170Natural Pool (Point)

A - 159 C - 48PAL240Non-communication Tower (Point)

A - 160 C - 48AEC020Oasis (Area)

A - 161 C - 49PBD110Offshore Platform (Point)

A - 162 C - 49AAK120Park (Area)

A - 163 C - 49AAL140Particle Accelerator (Area)

A - 164 C - 50LBH110Penstock (Line)

A - 166 C - 51LAQ113Pipeline (Line)

A - 169 C - 52LAT030Power Line (Line)

A - 171 C - 53AAD010Power Station (Area)

A - 171 C - 53PAD010Power Station (Point)

A - 173 C - 53AAD030Power Substation (Area)

A - 173 C - 53PAD030Power Substation (Point)

A - 174 C - 54AAC000Processing Facility (Area)

A - 174 C - 54PAC000Processing Facility (Point)

A - 175 C - 54AAL170Public Square (Area)

A - 176 C - 54AAQ116Pumping Station (Area)

A - 176 C - 54PAQ116Pumping Station (Point)

A - 177 C - 55AAA012Quarry (Area)

A - 178 C - 55PAA012Quarry (Point)

A - 179 C - 55LAK130Racetrack (Line)

A - 180 C - 56PAT045Radar Station (Point)

A - 182 C - 57LAN010Railway (Line)

A - 200 C - 69LAN050Railway Sidetrack (Line)

A - 204 N/APAN075Railway Turntable (Point)

A - 204 C - 69AAN060Railway Yard (Area)

A - 205 C - 69ABH120Rapids (Area)

L - 5


DN: 09-048 17 November 2009

A - 205 C - 69LBH120Rapids (Line)

A - 206 C - 69PBH120Rapids (Point)

A - 207 C - 70AAK190Recreational Pier (Area)

A - 207 C - 70LAK190Recreational Pier (Line)

A - 208 C - 70AAB010Recycling Site (Area)

A - 209 C - 70ABH130Reservoir (Area)

A - 210 C - 70ABH135Rice Field (Area)

A - 211 C - 71PAA040Rig (Point)

A - 213 C - 72ABH140River (Area)

A - 214 C - 72LBH140River (Line)

A - 215 C - 73LAP030Road (Line)

A - 226 C - 74AAQ135Roadside Rest Area (Area)

A - 227 N/AADB160Rock Formation (Area)

A - 227 N/APDB160Rock Formation (Point)

A - 228 C - 74AAL200Ruins (Area)

A - 228 C - 75AGB055Runway (Area)

A - 229 N/AABH160Sabkha (Area)

A - 229 C - 75ABH155Salt Evaporator (Area)

A - 230 C - 75ADB170Sand Dunes (Area)

A - 233 C - 75PGB065Seaplane Base (Point)

A - 234 N/ALBB230Seawall (Line)

A - 235 C - 5AAL105Settlement (Area)

A - 235 C - 75PAL105Settlement (Point)

A - 236 C - 76AAC030Settling Pond (Area)

A - 237 C - 76ABB240Slipway (Area)

A - 238 C - 76LBI040Sluice Gate (Line)

A - 238 C - 76PBI040Sluice Gate (Point)

A - 239 C - 77PAF010Smokestack (Point)

A - 240 C - 77ABJ100Snow Field and/or Ice-Field (Area)

A - 241 C - 78ADA010Soil Surface Region (Area)

L - 6


DN: 09-048 17 November 2009

A - 243 C - 79PAD020Solar Panel (Point)

A - 244 C - 80Spot ElevationSpot Elevation (Point)

A - 245 C - 81AAK160Stadium (Area)

A - 245 C - 81PAK160Stadium (Point)

A - 247 N/ALDB010Steep Terrain Face (Line)

A - 247 C - 81AAM010Storage Depot (Area)

A - 248 C - 82AAM070Storage Tank (Area)

A - 248 C - 82PAM070Storage Tank (Point)

A - 250 C - 82ABD100Structural Pile (Area)

A - 250 C - 82PBD100Structural Pile (Point)

A - 251 C - 83AAM060Surface Bunker (Area)

A - 251 C - 83PAM060Surface Bunker (Point)

A - 252 N/AAED020Swamp (Area)

A - 252 N/AAGB075Taxiway (Area)

A - 253 C - 83AFA100Test Site (Area)

A - 253 N/AAEB020Thicket (Area)

A - 254 C - 83ABA040Tidal Water (Area)

A - 254 C - 83LAP050Trail (Line)

A - 255 C - 84ABB140Training Wall (Area)

A - 255 C - 84LBB140Training Wall (Line)

A - 256 C - 84AAQ125Transportation Station (Area)

A - 256 C - 84PAQ125Transportation Station (Point)

A - 256 C - 84ABJ110Tundra (Area)

A - 257 C - 85LAQ130Tunnel (Line)

A - 261 N/APBH145Vainishing Point (Point)

A - 262 C - 85AAQ140Vehicle Lot (Area)

A - 262 C - 85AZD020Void Collection Area (Area)

A - 263 C - 86ADB180Volcano (Area)

A - 263 C - 86PDB180Volcano (Point)

A - 264 C - 86LAL260Wall (Line)

L - 7


DN: 09-048 17 November 2009

A - 264 C - 86PBI050Water Intake Tower (Point)

A - 265 C - 87PAM080Water Tower (Point)

A - 266 C - 87ABH040Water Treatment Bed (Area)

A - 267 C - 88LBH180Waterfall (Line)

A - 267 C - 88PBH180Waterfall (Point)

A - 268 C - 88PAA050Well (Point)

A - 270 C - 89PAJ050Windmill (Point)

A - 272 C - 90PAJ051Windmotor (Point)

A - 274 C - 91AEC030Wood (Area)

A - 278 N/ALEC030Wood (Line)

A - 279 N/APEC030Wood (Point)

A - 279 C - 92AAK180Zoo (Area)

L - 8

Index (sorted by Feature Code)

DN: 09-048 17 November 2009

Feature Code Feature Name Symbol Page Label Page

A - 109 C - 33Extraction Mine (Area)AAA010

A - 177 C - 55Quarry (Area)AAA012

A - 83 C - 30Disposal Site (Area)AAB000

A - 208 C - 70Recycling Site (Area)AAB010

A - 174 C - 54Processing Facility (Area)AAC000

A - 236 C - 76Settling Pond (Area)AAC030

A - 171 C - 53Power Station (Area)AAD010

A - 173 C - 53Power Substation (Area)AAD030

A - 130 C - 38Heating Facility (Area)AAD050

A - 118 C - 35Fortification (Area)AAH050

A - 58 C - 22Circular Irrigation System (Area)AAJ010

A - 134 C - 39Holding Pen (Area)AAJ030

A - 10 C - 4Amusement Park (Area)AAK030

A - 47 C - 18Camp-site (Area)AAK060

A - 112 C - 33Fairground (Area)AAK090

A - 121 C - 35Golf Course (Area)AAK100

A - 162 C - 49Park (Area)AAK120

A - 245 C - 81Stadium (Area)AAK160

A - 279 C - 92Zoo (Area)AAK180

A - 207 C - 70Recreational Pier (Area)AAK190

A - 16 C - 6Archaeological Site (Area)AAL012

A - 27 C - 11Building (Area)AAL015

A - 42 C - 18Built-Up Area (Area)AAL020

A - 53 C - 21Cemetery (Area)AAL030

A - 235 C - 5Settlement (Area)AAL105

A - 163 C - 49Particle Accelerator (Area)AAL140

A - 175 C - 54Public Square (Area)AAL170

A - 228 C - 74Ruins (Area)AAL200

L - 9


DN: 09-048 17 November 2009

A - 247 C - 81Storage Depot (Area)AAM010

A - 124 N/AGrain Storage Structure (Area)AAM020

A - 122 C - 36Grain Elevator (Area)AAM030

A - 153 C - 45Mineral Pile (Area)AAM040

A - 251 C - 83Surface Bunker (Area)AAM060

A - 248 C - 82Storage Tank (Area)AAM070

A - 204 C - 69Railway Yard (Area)AAN060

A - 176 C - 54Pumping Station (Area)AAQ116

A - 256 C - 84Transportation Station (Area)AAQ125

A - 226 C - 74Roadside Rest Area (Area)AAQ135

A - 262 C - 85Vehicle Lot (Area)AAQ140

A - 61 C - 23Communication Station (Area)AAT050

A - 137 C - 40Island (Area)ABA030

A - 254 C - 83Tidal Water (Area)ABA040

A - 17 C - 6Beach (Area)ABA050

A - 128 C - 37Harbour (Area)ABB005

A - 22 C - 9Breakwater (Area)ABB041

A - 127 C - 37Groin (Area)ABB043

A - 86 N/ADry Dock (Area)ABB090

A - 255 C - 84Training Wall (Area)ABB140

A - 19 C - 7Berthing Structure (Area)ABB190

A - 237 C - 76Slipway (Area)ABB240

A - 250 C - 82Structural Pile (Area)ABD100

A - 21 C - 8Bog (Area)ABH015

A - 48 C - 19Canal (Area)ABH020

A - 84 C - 30Ditch (Area)ABH030

A - 266 C - 87Water Treatment Bed (Area)ABH040

A - 147 C - 42Marine Farm (Area)ABH050

A - 138 C - 40Lake (Area)ABH080

L - 10


DN: 09-048 17 November 2009

A - 140 N/ALand Subject to Inundation (Area)ABH090

A - 205 C - 69Rapids (Area)ABH120

A - 209 C - 70Reservoir (Area)ABH130

A - 210 C - 70Rice Field (Area)ABH135

A - 213 C - 72River (Area)ABH140

A - 229 C - 75Salt Evaporator (Area)ABH155

A - 229 N/ASabkha (Area)ABH160

A - 77 C - 28Dam (Area)ABI020

A - 145 C - 42Lock (Area)ABI030

A - 156 C - 46Moraine (Area)ABJ020

A - 121 N/AGlacier (Area)ABJ030

A - 240 C - 77Snow Field and/or Ice-Field (Area)ABJ100

A - 256 C - 84Tundra (Area)ABJ110

A - 241 C - 78Soil Surface Region (Area)ADA010

A - 103 C - 32Embankment (Area)ADB090

A - 120 C - 35Geothermal Outlet (Area)ADB115

A - 227 N/ARock Formation (Area)ADB160

A - 230 C - 75Sand Dunes (Area)ADB170

A - 263 C - 86Volcano (Area)ADB180

A - 2 C - 2Administrative Boundary (Line)Administrative Boundary

A - 5 C - 3Administrative Division (Area)Administrative Division

A - 70 C - 27Crop Land (Area)AEA010

A - 126 N/AGrassland (Area)AEB010

A - 253 N/AThicket (Area)AEB020

A - 50 N/ACane (Area)AEC010

A - 160 C - 48Oasis (Area)AEC020

A - 274 C - 91Wood (Area)AEC030

A - 59 C - 23Cleared Way (Area)AEC040

A - 117 N/AForest Clearing (Area)AEC060

L - 11


DN: 09-048 17 November 2009

A - 149 N/AMarsh (Area)AED010

A - 252 N/ASwamp (Area)AED020

A - 253 C - 83Test Site (Area)AFA100

A - 6 C - 3Aerodrome (Area)AGB005

A - 10 N/AApron (Area)AGB015

A - 133 C - 39Heliport (Area)AGB035

A - 228 C - 75Runway (Area)AGB055

A - 252 N/ATaxiway (Area)AGB075

A - 152 C - 44Military Installation (Area)ASU001

A - 262 C - 85Void Collection Area (Area)AZD020

A - 71 N/ACulvert (Point)Culvert

A - 87 C - 31Elevation Contour (Line)Elevation Contour

A - 136 C - 39International Date Line (Line)International Date Line

A - 65 C - 25Conveyor (Line)LAF020

A - 179 C - 55Racetrack (Line)LAK130

A - 207 C - 70Recreational Pier (Line)LAK190

A - 112 N/AFence (Line)LAL070

A - 264 C - 86Wall (Line)LAL260

A - 182 C - 57Railway (Line)LAN010

A - 200 C - 69Railway Sidetrack (Line)LAN050

A - 51 C - 19Cart Track (Line)LAP010

A - 215 C - 73Road (Line)LAP030

A - 254 C - 83Trail (Line)LAP050

A - 24 C - 10Bridge (Line)LAQ040

A - 52 C - 20Causeway (Line)LAQ064

A - 113 C - 34Ferry Crossing (Line)LAQ070

A - 136 C - 39Ice Route (Line)LAQ075

A - 166 C - 51Pipeline (Line)LAQ113

A - 257 C - 85Tunnel (Line)LAQ130

L - 12


DN: 09-048 17 November 2009

A - 169 C - 52Power Line (Line)LAT030

A - 45 C - 19Cableway (Line)LAT041

A - 60 C - 23Communication Line (Line)LAT060

A - 141 N/ALand Water Boundary (Line)LBA010

A - 23 C - 9Breakwater (Line)LBB041

A - 128 C - 37Groin (Line)LBB043

A - 255 C - 84Training Wall (Line)LBB140

A - 20 C - 8Berthing Structure (Line)LBB190

A - 234 N/ASeawall (Line)LBB230

A - 11 C - 5Aqueduct (Line)LBH010

A - 49 C - 19Canal (Line)LBH020

A - 85 N/ADitch (Line)LBH030

A - 116 N/AFord (Line)LBH070

A - 164 C - 50Penstock (Line)LBH110

A - 205 C - 69Rapids (Line)LBH120

A - 214 C - 72River (Line)LBH140

A - 267 C - 88Waterfall (Line)LBH180

A - 78 C - 28Dam (Line)LBI020

A - 146 C - 42Lock (Line)LBI030

A - 238 C - 76Sluice Gate (Line)LBI040

A - 134 N/AIce Cliff (Line)LBJ040

A - 247 N/ASteep Terrain Face (Line)LDB010

A - 72 N/ACut (Line)LDB070

A - 75 N/ACut Line (Line)LDB071

A - 105 C - 32Embankment (Line)LDB090

A - 119 C - 35Geologic Fault (Line)LDB110

A - 131 N/AHedgerow (Line)LEA020

A - 278 N/AWood (Line)LEC030

A - 8 C - 4Aircraft Revetment (Line)LGB050

L - 13


DN: 09-048 17 November 2009

A - 148 C - 42Maritime Area (Line)Maritime Area

A - 110 C - 33Extraction Mine (Point)PAA010

A - 178 C - 55Quarry (Point)PAA012

A - 211 C - 71Rig (Point)PAA040

A - 268 C - 88Well (Point)PAA050

A - 174 C - 54Processing Facility (Point)PAC000

A - 51 C - 19Catalytic Cracker (Point)PAC020

A - 171 C - 53Power Station (Point)PAD010

A - 243 C - 79Solar Panel (Point)PAD020

A - 173 C - 53Power Substation (Point)PAD030

A - 130 C - 38Heating Facility (Point)PAD050

A - 239 C - 77Smokestack (Point)PAF010

A - 66 C - 26Cooling Tower (Point)PAF030

A - 68 C - 27Crane (Point)PAF040

A - 114 C - 34Flare Pipe (Point)PAF070

A - 118 N/AFortification (Point)PAH050

A - 58 C - 22Checkpoint (Point)PAH070

A - 270 C - 89Windmill (Point)PAJ050

A - 272 C - 90Windmotor (Point)PAJ051

A - 245 C - 81Stadium (Point)PAK160

A - 16 N/AArchaeological Site (Point)PAL012

A - 32 C - 14Building (Point)PAL015

A - 44 C - 18Built-Up Area (Point)PAL020

A - 47 N/ACairn (Point)PAL025

A - 55 C - 21Cemetery (Point)PAL030

A - 235 C - 75Settlement (Point)PAL105

A - 150 C - 43Memorial Monument (Point)PAL130

A - 159 C - 48Non-communication Tower (Point)PAL240

A - 124 C - 37Grain Storage Structure (Point)PAM020

L - 14


DN: 09-048 17 November 2009

A - 122 C - 36Grain Elevator (Point)PAM030

A - 153 C - 45Mineral Pile (Point)PAM040

A - 251 C - 83Surface Bunker (Point)PAM060

A - 248 C - 82Storage Tank (Point)PAM070

A - 265 C - 87Water Tower (Point)PAM080

A - 204 N/ARailway Turntable (Point)PAN075

A - 64 C - 25Control Tower (Point)PAQ060

A - 113 C - 34Ferry Crossing (Point)PAQ070

A - 108 N/AEntrance and/or Exit (Point)PAQ090

A - 155 C - 46Mooring Mast (Point)PAQ110

A - 176 C - 54Pumping Station (Point)PAQ116

A - 256 C - 84Transportation Station (Point)PAQ125

A - 81 C - 29Dish Aerial (Point)PAT010

A - 180 C - 56Radar Station (Point)PAT045

A - 62 C - 24Communication Tower (Point)PAT080

A - 18 C - 6Beach (Point)PBA050

A - 148 C - 42Maritime Signal Station (Point)PBB155

A - 143 C - 41Lighthouse (Point)PBC050

A - 250 C - 82Structural Pile (Point)PBD100

A - 161 C - 49Offshore Platform (Point)PBD110

A - 129 C - 38Hazardous Rock (Point)PBD130

A - 15 N/AAqueduct (Point)PBH010

A - 117 N/AFord (Point)PBH070

A - 206 C - 69Rapids (Point)PBH120

A - 261 N/AVainishing Point (Point)PBH145

A - 158 C - 47Natural Pool (Point)PBH170

A - 267 C - 88Waterfall (Point)PBH180

A - 59 N/ACistern (Point)PBI010

A - 79 C - 28Dam (Point)PBI020

L - 15


DN: 09-048 17 November 2009

A - 147 C - 42Lock (Point)PBI030

A - 238 C - 76Sluice Gate (Point)PBI040

A - 264 C - 86Water Intake Tower (Point)PBI050

A - 135 N/AIce Peak (Point)PBJ060

A - 52 C - 20Cave (Point)PDB030

A - 120 N/AGeothermal Outlet (Point)PDB115

A - 157 C - 46Mountain Pass (Point)PDB150

A - 227 N/ARock Formation (Point)PDB160

A - 263 C - 86Volcano (Point)PDB180

A - 279 N/AWood (Point)PEC030

A - 9 C - 4Airport Navigation Lights (Point)PGB010

A - 132 C - 39Helipad (Point)PGB030

A - 142 C - 41Launch Pad (Point)PGB040

A - 233 C - 75Seaplane Base (Point)PGB065

A - 7 C - 4Air Obstruction (Point)PGB220

A - 152 C - 44Military Installation (Point)PSU001

A - 157 C - 47Named Location (Point)PZD040

A - 244 C - 80Spot Elevation (Point)Spot Elevation

L - 16

portrayal standard for mgcp data

Documents

airport navigation

steep terrain

detailed drawing

product finishing

require user

electricnotinuse

single normal

single narrow