poolpac tm technical data - air change · poolpac tm – technical data acpp1000 technical...
TRANSCRIPT
Air Change Australia Pty Ltd accept no responsibility for possible errors in catalogues, brochures and other printed material. Air Change Australia Pty Ltd reserves the right to alter its products without notice.
POOLPAC TM
– TECHNICAL DATA
ACPP750 TECHNICAL SPECIFICATIONS UNIT VALUE
Supply Air L/s 750
Return Air L/s 750
Outdoor Air L/s 750
Condenser Air L/s 450
Exhaust Air – (RA + CA) L/s 1200
Compressor Qty 1
Refrigerant Charge (R407C) kg/Comp 2.9
Total Compressor Capacity kWr 16
OUTDOOR AIR TO SUPPLY AIR
Pressure Drop Heat Exchanger Pa 122
Pressure Drop Evaporator Coil Pa 80
External Static Pressure Up to Pa 150
Total Pressure on Supply Fan Pa 352
SUPPLY FAN
Fan Speed (max) rpm 1350
Motor Power kW 0.75
Motor Poles 4
Motor Torque Nm N/A
RETURN AIR TO EXHAUST AIR
Pressure Drop Heat Exchanger Pa 122
Pressure Drop Condenser Coil Pa 45
External Static Pressure Up to Pa 150
Total Pressure on Exhaust Fan Pa 317
EXHAUST FAN
Fan Speed (max) rpm 1350
Motor Power kW 0.75
Motor Poles 4
Motor Torque Nm N/A
CONDENSER AIR
Fan Qty 0
Air Flow L/s 450
Fan Speed N/A
COIL SIZE
Condenser Coil mm 1060 X 508
Evaporator Coil mm 1060 X 356
Face Velocity Coil Evap m/s 1.99
ELECTRICAL POWERING 415/3/50
Compressor (RLA / FLA) A 8.9/17.0
Supply Fan (FLA) A 4.0
Exhaust Fan (RLA / FLA) A 4.0
Condenser Fan (RLA / FLA) A N/A
Nominal Running Current A 8.9/12.9/12.9
Total Full Load Amps A 17.0/21.0/21.0
SOUND LEVEL
Sound Pressure Level Intake @ 4m dB (A) 67
Sound Pressure Level Exhaust @ 1m dB (A) 79
POOLPACTM SCHEMATICS & DIMENSIONS
Standard
UNIT DIMENSION (mm) and Weight (kg)
Body Width (E) / Overall Width (F) 1560/1760
Body Depth (G) / Overall Depth (H) 1250/1330
Body Height (I) / Overall Height (J) 1050/1150
Weight (kg) 420
SPIGOT SIZES (mm)
Supply Air (C x D1) 1010 x 325
Return Air (A x B2) 1460 x 380
Exhaust (C x D2) 1010 x 470
Outdoor (A x B1) 1460 x 520
CLEARANCE REQUIREMENT (mm)
Minimum LHS Requirement 1200
Minimum RHS Requirement 1000
BASE FRAME DRAWING
Air Change Australia Pty Ltd accept no responsibility for possible errors in catalogues, brochures and other printed material. Air Change Australia Pty Ltd reserves the right to alter its products without notice.
POOLPAC TM
– TECHNICAL DATA
ACPP1000 TECHNICAL SPECIFICATIONS UNIT VALUE
Supply Air L/s 1000
Return Air L/s 1000
Outdoor Air L/s 1000
Condenser Air L/s 600
Exhaust Air – (RA + CA) L/s 1600
Compressor Qty 1
Refrigerant Charge (R407C) kg/Comp 4.3
Total Compressor Capacity kWr 20
OUTDOOR AIR TO SUPPLY AIR
Pressure Drop Heat Exchanger Pa 133
Pressure Drop Evaporator Coil Pa 100
External Static Pressure Up to Pa 200
Total Pressure on Supply Fan Pa 433
SUPPLY FAN
Fan Speed (max) rpm 2400
Motor Power kW 1.5
Motor Poles 4
Motor Torques Nm 10.2
RETURN AIR TO EXHAUST AIR
Pressure Drop Heat Exchanger Pa 133
Pressure Drop Condenser Coil Pa 95
External Static Pressure Up to Pa 150
Total Pressure on Exhaust Fan Pa 378
EXHAUST FAN
Fan Speed (max) rpm 2400
Motor Power kW 1.5
Motor Poles 4
Motor Torques Nm 10.2
CONDENSER AIR
Fan Qty 0
Air Flow L/s 600
Fan Speed N/A
COIL SIZE
Condenser Coil mm 1250 X 508
Evaporator Coil mm 1250 X 356
Face Velocity Coil Evap m/s 2.25
ELECTRICAL POWERING 415/3/50
Compressor (RLA / FLA) A 10.2/17.0
Supply Fan (FLA) A 3.4
Exhaust Fan (FLA) A 3.4
Condenser Fan (FLA) A 1.5
Nominal Running Current A 18/17/17
Total Full Load Amps A 24.8/23.8/23.8
SOUND LEVEL
Sound Pressure Level Intake @ 4m dB (A) 67
Sound Pressure Level Exhaust @ 1m dB (A) 79
POOLPACTM SCHEMATICS & DIMENSIONS
Standard
UNIT DIMENSION (mm) and Weight (kg)
Body Width (E) / Overall Width (F) 1750/1950
Body Depth (G) / Overall Depth (H) 1550/1630
Body Height (I) / Overall Height (J) 1100/1200
Weight (kg) 500
SPIGOT SIZES (mm)
Supply Air (C x D1) 1200 x 325
Return Air (A x B2) 1650 x 430
Exhaust (C x D2) 1200 x 470
Outdoor (A x B1) 1650 x 520
CLEARANCE REQUIREMENT (mm)
Minimum LHS Requirement 1000
Minimum RHS Requirement 1200
BASE FRAME DRAWING
Air Change Australia Pty Ltd accept no responsibility for possible errors in catalogues, brochures and other printed material. Air Change Australia Pty Ltd reserves the right to alter its products without notice.
POOLPAC TM
– TECHNICAL DATA
ACPP1200 TECHNICAL SPECIFICATIONS UNIT VALUE
Supply Air L/s 1200
Return Air L/s 1200
Outdoor Air L/s 1200
Condenser Air L/s 750
Exhaust Air – (RA + CA) L/s 1950
Compressor Qty 1
Refrigerant Charge (R407C) kg/Comp 5.8
Total Compressor Capacity kWr 27
OUTDOOR AIR TO SUPPLY AIR
Pressure Drop Heat Exchanger Pa 136
Pressure Drop Evaporator Coil Pa 140
External Static Pressure Up to Pa 200
Total Pressure on Supply Fan Pa 476
SUPPLY FAN
Fan Speed (max) rpm 2400
Motor Power kW 1.5
Motor Poles 4
Motor Torques Nm 10.2
RETURN AIR TO EXHAUST AIR
Pressure Drop Heat Exchanger Pa 136
Pressure Drop Condenser Coil Pa 85
External Static Pressure Up to Pa 200
Total Pressure on Exhaust Fan Pa 421
EXHAUST FAN
Fan Speed (max) rpm 2000
Motor Power kW 2.2
Motor Poles 4
Motor Torques Nm 14.7
CONDENSER AIR
Fan Qty 0
Air Flow L/s 720
Fan Speed N/A
COIL SIZE
Condenser Coil mm 1500 X 584
Evaporator Coil mm 1500 X 432
Face Velocity Coil Evap m/s 1.85
ELECTRICAL POWERING 415/3/50
Compressor (RLA / FLA) A 13.5/20.0
Supply Fan (FLA) A 3.4
Exhaust Fan (FLA) A 4.7
Condenser Fan (FLA) A 3
Nominal Running Current A 22.6/21.6/21.6
Total Full Load Amps A 29.1/28.1/28.1
SOUND LEVEL
Sound Pressure Level Intake @ 4m dB (A) 67
Sound Pressure Level Exhaust @ 1m dB (A) 79
POOLPACTM SCHEMATICS & DIMENSIONS
Standard
UNIT DIMENSION (mm) and Weight (kg)
Body Width (E) / Overall Width (F) 2000/2200
Body Depth (G) / Overall Depth (H) 1550/1630
Body Height (I) / Overall Height (J) 1200/1300
Weight (kg) 610
SPIGOT SIZES (mm)
Supply Air (C x D1) 1450 x 380
Return Air (A x B2) 1900 x 440
Exhaust (C x D2) 1450 x 560
Outdoor (A x B1) 1900 x 610
CLEARANCE REQUIREMENT (mm)
Minimum LHS Requirement 1200
Minimum RHS Requirement 1000
BASE FRAME DRAWING
Air Change Australia Pty Ltd accept no responsibility for possible errors in catalogues, brochures and other printed material. Air Change Australia Pty Ltd reserves the right to alter its products without notice.
POOLPAC TM
– TECHNICAL DATA
ACPP1400 TECHNICAL SPECIFICATIONS UNIT VALUE
Supply Air L/s 1400
Return Air L/s 1400
Outdoor Air L/s 1400
Condenser Air L/s 850
Exhaust Air – (RA + CA) L/s 2250
Compressor Qty 1
Refrigerant Charge (R407C) kg/Comp 5.7
Total Compressor Capacity kWr 32
OUTDOOR AIR TO SUPPLY AIR
Pressure Drop Heat Exchanger Pa 148
Pressure Drop Evaporator Coil Pa 160
External Static Pressure Up to Pa 200
Total Pressure on Supply Fan Pa 508
SUPPLY FAN
Fan Speed (max) rpm 2000
Motor Power kW 2.2
Motor Poles 4
Motor Torque Nm 14.7
RETURN AIR TO EXHAUST AIR
Pressure Drop Heat Exchanger Pa 148
Pressure Drop Condenser Coil Pa 105
External Static Pressure Up to Pa 200
Total Pressure on Exhaust Fan Pa 453
EXHAUST FAN
Fan Speed (max) rpm 2000
Motor Power kW 3
Motor Poles 4
Motor Torque Nm 20.0
CONDENSER AIR
Fan Qty 0
Air Flow L/s 840
Fan Speed N/A
COIL SIZE
Condenser Coil mm 1500 X 584
Evaporator Coil mm 1500 X 432
Face Velocity Coil Evap m/s 2.16
ELECTRICAL POWERING 415/3/50
Compressor (RLA / FLA) A 16.5/29.0
Supply Fan (FLA) A 4.7
Exhaust Fan (FLA) A 6.2
Condenser Fan (FLA) A N/A
Nominal Running Current A 28.4/27.4/27.4
Total Full Load Amps A 40.9/39.9/39.9
SOUND LEVEL
Sound Pressure Level Intake @ 4m dB (A) 67
Sound Pressure Level Exhaust @ 1m dB (A) 79
POOLPACTM SCHEMATICS & DIMENSIONS
Standard
UNIT DIMENSION (mm) and Weight (kg)
Body Width (E) / Overall Width (F) 2000/2200
Body Depth (G) / Overall Depth (H) 1550/1630
Body Height (I) / Overall Height (J) 1200/1300
Weight (kg) 780
SPIGOT SIZES (mm)
Supply Air (C x D1) 1450 x 380
Return Air (A x B2) 1900 x 440
Exhaust (C x D2) 1450 x 560
Outdoor (A x B1) 1900 x 610
CLEARANCE REQUIREMENT (mm)
Minimum LHS Requirement 1200
Minimum RHS Requirement 1000
BASE FRAME DRAWING
Air Change Australia Pty Ltd accept no responsibility for possible errors in catalogues, brochures and other printed material. Air Change Australia Pty Ltd reserves the right to alter its products without notice.
POOLPAC TM
– TECHNICAL DATA
ACPP1700 TECHNICAL SPECIFICATIONS UNIT VALUE
Supply Air L/s 1700
Return Air L/s 1700
Outdoor Air L/s 1700
Condenser Air L/s 1020
Exhaust Air – (RA + CA) L/s 2720
Compressor Qty 1
Refrigerant Charge (R407C) kg/Comp 6.0
Total Compressor Capacity kWr 36
OUTDOOR AIR TO SUPPLY AIR
Pressure Drop Heat Exchanger Pa 167
Pressure Drop Evaporator Coil Pa 127
External Static Pressure Up to Pa 250
Total Pressure on Supply Fan Pa 544
SUPPLY FAN
Fan Speed (max) rpm 2000
Motor Power kW 3
Motor Poles 4
Motor Torques Nm 20
RETURN AIR TO EXHAUST AIR
Pressure Drop Heat Exchanger Pa 167
Pressure Drop Condenser Coil Pa 140
External Static Pressure Up to Pa 200
Total Pressure on Exhaust Fan Pa 507
EXHAUST FAN
Fan Speed (max) rpm 1800
Motor Power kW 4
Motor Poles 4
Motor Torques Nm 26.6
CONDENSER AIR
Fan Qty 0
Air Flow L/s 1020
Fan Speed N/A
COIL SIZE
Condenser Coil mm 1500 X 584
Evaporator Coil mm 1500 X 432
Face Velocity Coil Evap m/s 2.62
ELECTRICAL POWERING 415/3/50
Compressor (RLA / FLA) A 18.0/32.0
Supply Fan (FLA) A 6.2
Exhaust Fan (FLA) A 8.0
Condenser Fan (FLA) A N/A
Nominal Running Current A 33.2/32.2/32.2
Total Full Load Amps A 47.2/46.2/46.2
SOUND LEVEL
Sound Pressure Level Intake @ 4m dB (A) 67
Sound Pressure Level Exhaust @ 1m dB (A) 79
POOLPACTM SCHEMATICS & DIMENSIONS
Standard
UNIT DIMENSION (mm) and Weight (kg)
Body Width (E) / Overall Width (F) 2000/2200
Body Depth (G) / Overall Depth (H) 1550/1630
Body Height (I) / Overall Height (J) 1200/1300
Weight (kg) 780
SPIGOT SIZES (mm)
Supply Air (C x D1) 1450 x 380
Return Air (A x B2) 1900 x 440
Exhaust (C x D2) 1450 x 560
Outdoor (A x B1) 1900 x 610
CLEARANCE REQUIREMENT (mm)
Minimum LHS Requirement 1200
Minimum RHS Requirement 1200
BASE FRAME DRAWING
Air Change Australia Pty Ltd accept no responsibility for possible errors in catalogues, brochures and other printed material. Air Change Australia Pty Ltd reserves the right to alter its products without notice.
.
POOLPAC TM
– TECHNICAL DATA
ACPP2000 TECHNICAL SPECIFICATIONS UNIT VALUE
Supply Air L/s 2000
Return Air L/s 2000
Outdoor Air L/s 2000
Condenser Air L/s 1500
Exhaust Air – (RA + CA) L/s 3500
Compressor Qty 2
Refrigerant Charge (R407C) kg/Comp 5.2
Total Compressor Capacity kWr 45
OUTDOOR AIR TO SUPPLY AIR
Pressure Drop Heat Exchanger Pa 125
Pressure Drop Evaporator Coil Pa 80
External Static Pressure Up to Pa 250
Total Pressure on Supply Fan Pa 455
SUPPLY FAN
Fan Speed (max) rpm 1800
Motor Power kW 2.2
Motor Poles 4
Motor Torques Nm 14.7
RETURN AIR TO EXHAUST AIR
Pressure Drop Heat Exchanger Pa 125
Pressure Drop Condenser Coil Pa 105
External Static Pressure Up to Pa 200
Total Pressure on Exhaust Fan Pa 430
EXHAUST FAN
Fan Speed (max) rpm 1800
Motor Power kW 2.2
Motor Poles 4
Motor Torques Nm 14.7
CONDENSER AIR
Fan Qty 1
Air Flow L/s 1500
Fan Speed 1360
COIL SIZE
Condenser Coil mm 1500 X 762
Evaporator Coil mm 1500 X 635
Face Velocity Coil Evap m/s 2.10
ELECTRICAL POWERING 415/3/50
Compressor (RLA / FLA) A 23/34
Supply Fan (FLA) A 4.7
Exhaust Fan (FLA) A 4.7
Condenser Fan (FLA) A 1.5
Nominal Running Current A 34.9/33.9/33.9
Total Full Load Amps A 45.9/44.9/44.9
SOUND LEVEL
Sound Pressure Level Intake @ 4m dB (A) 67
Sound Pressure Level Exhaust @ 1m dB (A) 79
POOLPACTM SCHEMATICS & DIMENSIONS
Standard
UNIT DIMENSION (mm) and Weight (kg)
Body Width (E) / Overall Width (F) 2050 / 2250
Body Depth (G) / Overall Depth (H) 2270 / 2350
Body Height (I) / Overall Height (J) 1750 / 1850
Weight (kg) 1060
SPIGOT SIZES (mm)
Supply Air (C x D1) 1450 x 580
Return Air (A x B2) 1950 x 720
Exhaust (C x D2) 1450 x 730
Outdoor (A x B1) 1950 x 880
CLEARANCE REQUIREMENT (mm)
Minimum LHS Requirement 1200
Minimum RHS Requirement 1000
BASE FRAME DRAWING
Air Change Australia Pty Ltd accept no responsibility for possible errors in catalogues, brochures and other printed material. Air Change Australia Pty Ltd reserves the right to alter its products without notice.
.
POOLPAC TM
– TECHNICAL DATA
ACPP2300 TECHNICAL SPECIFICATIONS UNIT VALUE
Supply Air L/s 2300
Return Air L/s 2300
Outdoor Air L/s 2300
Condenser Air L/s 1500
Exhaust Air – (RA + CA) L/s 3800
Compressor Qty 2
Refrigerant Charge (R407C) kg/Comp 4.3
Total Compressor Capacity kWr 52
OUTDOOR AIR TO SUPPLY AIR
Pressure Drop Heat Exchanger Pa 202
Pressure Drop Evaporator Coil Pa 110
External Static Pressure Up to Pa 300
Total Pressure on Supply Fan Pa 612
SUPPLY FAN
Fan Speed (max) rpm 1800
Motor Power kW 3
Motor Poles 4
Motor Torques Nm 20
RETURN AIR TO EXHAUST AIR
Pressure Drop Heat Exchanger Pa 202
Pressure Drop Condenser Coil Pa 135
External Static Pressure Up to Pa 200
Total Pressure on Exhaust Fan Pa 537
EXHAUST FAN
Fan Speed (max) rpm 1800
Motor Power kW 3
Motor Poles 4
Motor Torques Nm 20
CONDENSER AIR
Fan Qty 1
Air Flow L/s 1500
Fan Speed 1360
COIL SIZE
Condenser Coil mm 1500 X 762
Evaporator Coil mm 1500 X 635
Face Velocity Coil Evap m/s 2.41
ELECTRICAL POWERING 415/3/50
Compressor (RLA / FLA) A 27/40
Supply Fan (FLA) A 6.2
Exhaust Fan (FLA) A 6.2
Condenser Fan (FLA) A 1.5
Nominal Running Current A 41.9/40.9/40.9
Total Full Load Amps A 54.9/53.9/53.9
SOUND LEVEL
Sound Pressure Level Intake @ 4m dB (A) 65
Sound Pressure Level Exhaust @ 1m dB (A) 76
POOLPACTM SCHEMATICS & DIMENSIONS
Standard
UNIT DIMENSION (mm) and Weight (kg)
Body Width (E) / Overall Width (F) 2050 / 2250
Body Depth (G) / Overall Depth (H) 2270 / 2350
Body Height (I) / Overall Height (J) 1750 / 1850
Weight (kg) 1130
SPIGOT SIZES (mm)
Supply Air (C x D1) 1450 x 580
Return Air (A x B2) 1950 x 720
Exhaust (C x D2) 1450 x 730
Outdoor (A x B1) 1950 x 880
CLEARANCE REQUIREMENT (mm)
Minimum LHS Requirement 1200
Minimum RHS Requirement 1000
BASE FRAME DRAWING
Air Change Australia Pty Ltd accept no responsibility for possible errors in catalogues, brochures and other printed material. Air Change Australia Pty Ltd reserves the right to alter its products without notice.
.
POOLPAC TM
– TECHNICAL DATA
ACPP2800 TECHNICAL SPECIFICATIONS UNIT VALUE
Supply Air L/s 2800
Return Air L/s 2800
Outdoor Air L/s 2800
Condenser Air L/s 3000
Exhaust Air – (RA + CA) L/s 5800
Compressor Qty 2
Refrigerant Charge (R407C) kg/Comp 6.8
Total Compressor Capacity kWr 65
OUTDOOR AIR TO SUPPLY AIR
Pressure Drop Heat Exchanger Pa 189
Pressure Drop Evaporator Coil Pa 95
External Static Pressure Up to Pa 300
Total Pressure on Supply Fan Pa 584
SUPPLY FAN
Fan Speed (max) rpm 1800
Motor Power kW 4
Motor Poles 4
Motor Torques Nm 26.6
RETURN AIR TO EXHAUST AIR
Pressure Drop Heat Exchanger Pa 189
Pressure Drop Condenser Coil Pa 95
External Static Pressure Up to Pa 250
Total Pressure on Exhaust Fan Pa 534
EXHAUST FAN
Fan Speed (max) rpm 1800
Motor Power kW 4
Motor Poles 4
Motor Torques Nm 26.6
CONDENSER AIR
Fan Qty 2
Air Flow L/s 3000
Fan Speed 1360
COIL SIZE
Condenser Coil mm 2110 X 914
Evaporator Coil mm 2110 X 762
Face Velocity Coil Evap m/s 1.74
ELECTRICAL POWERING 415/3/50
Compressor (RLA / FLA) A 33/58
Supply Fan (FLA) A 8
Exhaust Fan (FLA) A 8
Condenser Fan (FLA) A 3
Nominal Running Current A 53/52/52
Total Full Load Amps A 78/78/78
SOUND LEVEL
Sound Pressure Level Intake @ 4m dB (A) 67
Sound Pressure Level Exhaust @ 1m dB (A) 79
POOLPACTM SCHEMATICS & DIMENSIONS
Standard
UNIT DIMENSION (mm) and Weight (kg)
Body Width (E) / Overall Width (F) 2700 / 2900
Body Depth (G) / Overall Depth (H) 2270 / 2350
Body Height (I) / Overall Height (J) 1865 / 1965
Weight (kg) 1680
SPIGOT SIZES (mm)
Supply Air (C x D1) 2060 x 700
Return Air (A x B2) 2600 x 740
Exhaust (C x D2) 2060 x 880
Outdoor (A x B1) 2600 x 975
CLEARANCE REQUIREMENT (mm)
Minimum LHS Requirement 1200
Minimum RHS Requirement 1000
BASE FRAME DRAWING
Air Change Australia Pty Ltd accept no responsibility for possible errors in catalogues, brochures and other printed material. Air Change Australia Pty Ltd reserves the right to alter its products without notice.
POOLPAC TM
– TECHNICAL DATA
ACPP3200 TECHNICAL SPECIFICATIONS UNIT VALUE
Supply Air L/s 3200
Return Air L/s 3200
Outdoor Air L/s 3200
Condenser Air L/s 3000
Exhaust Air – (RA + CA) L/s 6200
Compressor Qty 2
Refrigerant Charge (R407C) kg/Comp 6.9
Total Compressor Capacity kWr 70
OUTDOOR AIR TO SUPPLY AIR
Pressure Drop Heat Exchanger Pa 208
Pressure Drop Evaporator Coil Pa 120
External Static Pressure Up to Pa 300
Total Pressure on Supply Fan Pa 628
SUPPLY FAN
Fan Speed (max) rpm 1400
Motor Power kW 5.5
Motor Poles 4
Motor Torques Nm 36.4
RETURN AIR TO EXHAUST AIR
Pressure Drop Heat Exchanger Pa 208
Pressure Drop Condenser Coil Pa 120
External Static Pressure Up to Pa 250
Total Pressure on Exhaust Fan Pa 578
EXHAUST FAN
Fan Speed (max) rpm 1400
Motor Power kW 5.5
Motor Poles 4
Motor Torques Nm 36.4
CONDENSER AIR
Fan Qty 2
Air Flow L/s 3000
Fan Speed 1360
COIL SIZE
Condenser Coil mm 2110 X 914
Evaporator Coil mm 2110 X 762
Face Velocity Coil Evap m/s 1.99
ELECTRICAL POWERING 415/3/50
Compressor (RLA / FLA) A 36/64
Supply Fan (FLA) A 10.8
Exhaust Fan (FLA) A 10.8
Condenser Fan (FLA) A 3
Nominal Running Current A 61.6/60.6/60.6
Total Full Load Amps A 89.6/88.6/88.6
SOUND LEVEL
Sound Pressure Level Intake @ 4m dB (A) 67
Sound Pressure Level Exhaust @ 1m dB (A) 79
POOLPACTM SCHEMATICS & DIMENSIONS
Standard
UNIT DIMENSION (mm) and Weight (kg)
Body Width (E) / Overall Width (F) 2700 / 2900
Body Depth (G) / Overall Depth (H) 2270 / 2350
Body Height (I) / Overall Height (J) 1865 / 1965
Weight (kg) 1720
SPIGOT SIZES (mm)
Supply Air (C x D1) 2060 x 700
Return Air (A x B2) 2600 x 740
Exhaust (C x D2) 2060 x 880
Outdoor (A x B1) 2600 x 975
CLEARANCE REQUIREMENT (mm)
Minimum LHS Requirement 1500
Minimum RHS Requirement 1000
BASE FRAME DRAWING
Air Change Australia Pty Ltd accept no responsibility for possible errors in catalogues, brochures and other printed material. Air Change Australia Pty Ltd reserves the right to alter its products without notice.
POOLPAC TM
– TECHNICAL DATA
ACPP3600 TECHNICAL SPECIFICATIONS UNIT VALUE
Supply Air L/s 3700
Return Air L/s 3700
Outdoor Air L/s 3700
Condenser Air L/s 3000
Exhaust Air – (RA + CA) L/s 6700
Compressor Qty 2
Refrigerant Charge (R407C) kg/Comp 7.2
Total Compressor Capacity kWr 82
OUTDOOR AIR TO SUPPLY AIR
Pressure Drop Heat Exchanger Pa 231
Pressure Drop Evaporator Coil Pa 102
External Static Pressure Up to Pa 340
Total Pressure on Supply Fan Pa 673
SUPPLY FAN
Fan Speed (max) rpm 1400
Motor Power kW 5.5
Motor Poles 4
Motor Torques Nm 36.4
RETURN AIR TO EXHAUST AIR
Pressure Drop Heat Exchanger Pa 231
Pressure Drop Condenser Coil Pa 102
External Static Pressure Up to Pa 250
Total Pressure on Exhaust Fan Pa 583
EXHAUST FAN
Fan Speed (max) rpm 1400
Motor Power kW 5.5
Motor Poles 4
Motor Torques Nm 36.4
CONDENSER AIR
Fan Qty 2
Air Flow L/s 3000
Fan Speed 1360
COIL SIZE
Condenser Coil mm 2100 X 914
Evaporator Coil mm 2110 X 762
Face Velocity Coil Evap m/s 2.30
ELECTRICAL POWERING 415/3/50
Compressor (RLA / FLA) A 38/64
Supply Fan (FLA) A 10.8
Exhaust Fan (FLA) A 10.8
Condenser Fan (FLA) A 3
Nominal Running Current A 63.6/62.6/62.6
Total Full Load Amps A 89.6/88.6/88.6
SOUND LEVEL
Sound Pressure Level Intake @ 4m dB (A) 67
Sound Pressure Level Exhaust @ 1m dB (A) 79
POOLPACTM SCHEMATICS & DIMENSIONS
Standard
UNIT DIMENSION (mm) and Weight (kg)
Body Width (E) / Overall Width (F) 2700 / 2900
Body Depth (G) / Overall Depth (H) 2270 / 2350
Body Height (I) / Overall Height (J) 1865 / 1965
Weight (kg) 1760
SPIGOT SIZES (mm)
Supply Air (C x D1) 2060 x 700
Return Air (A x B2) 2600 x 740
Exhaust (C x D2) 2060 x 880
Outdoor (A x B1) 2600 x 975
CLEARANCE REQUIREMENT (mm)
Minimum LHS Requirement 1500
Minimum RHS Requirement 1000
BASE FRAME DRAWING
Air Change Australia Pty Ltd accept no responsibility for possible errors in catalogues, brochures and other printed material. Air Change Australia Pty Ltd reserves the right to alter its products without notice.
POOLPAC TM
– TECHNICAL DATA
ACPP4200 TECHNICAL SPECIFICATIONS UNIT VALUE
Supply Air L/s 4200
Return Air L/s 4200
Outdoor Air L/s 4200
Condenser Air L/s 3000
Exhaust Air – (RA + CA) L/s 7200
Compressor Qty 2
Refrigerant Charge (R407C) kg/Comp 7.8
Total Compressor Capacity kWr 96
OUTDOOR AIR TO SUPPLY AIR
Pressure Drop Heat Exchanger Pa 254
Pressure Drop Evaporator Coil Pa 139
External Static Pressure Up to Pa 340
Total Pressure on Supply Fan Pa 733
SUPPLY FAN
Fan Speed (max) rpm 1400
Motor Power kW 7.5
Motor Poles 4
Motor Torques Nm 49.6
RETURN AIR TO EXHAUST AIR
Pressure Drop Heat Exchanger Pa 254
Pressure Drop Condenser Coil Pa 139
External Static Pressure Up to Pa 250
Total Pressure on Exhaust Fan Pa 643
EXHAUST FAN
Fan Speed (max) rpm 1400
Motor Power kW 7.5
Motor Poles 4
Motor Torques Nm 49.6
CONDENSER AIR
Fan Qty 2
Air Flow L/s 3000
Fan Speed 1360
COIL SIZE
Condenser Coil mm 2110 X 914
Evaporator Coil mm 2110 X 762
Face Velocity Coil Evap m/s 2.61
ELECTRICAL POWERING 415/3/50
Compressor (RLA / FLA) A 45.6/70
Supply Fan (FLA) A 14.2
Exhaust Fan (FLA) A 14.2
Condenser Fan (FLA) A 3
Nominal Running Current A 78/77/77
Total Full Load Amps A 102.4/101.4/101.4
SOUND LEVEL
Sound Pressure Level Intake @ 4m dB (A) 63
Sound Pressure Level Exhaust @ 1m dB (A) 78
POOLPACTM SCHEMATICS & DIMENSIONS
Standard
UNIT DIMENSION (mm) and Weight (kg)
Body Width (E) / Overall Width (F) 2700 / 2900
Body Depth (G) / Overall Depth (H) 2270 / 2350
Body Height (I) / Overall Height (J) 1865 / 1965
Weight (kg) 1920
SPIGOT SIZES (mm)
Supply Air (C x D1) 2060 x 700
Return Air (A x B2) 2600 x 740
Exhaust (C x D2) 2060 x 880
Outdoor (A x B1) 2600 x 975
CLEARANCE REQUIREMENT (mm)
Minimum LHS Requirement 1500
Minimum RHS Requirement 1000
BASE FRAME DRAWING
Air Change Australia Pty Ltd accept no responsibility for possible errors in catalogues, brochures and other printed material. Air Change Australia Pty Ltd reserves the right to alter its products without notice.
POOLPAC TM
– TECHNICAL DATA
ACPP5000 TECHNICAL SPECIFICATIONS UNIT VALUE
Supply Air L/s 5000
Return Air L/s 5000
Outdoor Air L/s 5000
Condenser Air L/s 3000
Exhaust Air – (RA + CA) L/s 8000
Compressor Qty 2
Refrigerant Charge (R407C) kg/Comp 10.5
Total Compressor Capacity kWr 125
OUTDOOR AIR TO SUPPLY AIR
Pressure Drop Heat Exchanger Pa 234
Pressure Drop Evaporator Coil Pa 134
External Static Pressure Up to Pa 300
Total Pressure on Supply Fan Pa 668
SUPPLY FAN
Fan Speed (max) rpm 1100
Motor Power kW 7.5
Motor Poles 6
Motor Torques Nm 74.0
RETURN AIR TO EXHAUST AIR
Pressure Drop Heat Exchanger Pa 234
Pressure Drop Condenser Coil Pa 128
External Static Pressure Up to Pa 250
Total Pressure on Exhaust Fan Pa 612
EXHAUST FAN
Fan Speed (max) rpm 1100
Motor Power kW 7.5
Motor Poles 6
Motor Torques Nm 74.0
CONDENSER AIR
Fan Qty 2
Air Flow L/s 3000
Fan Speed 1360
COIL SIZE
Condenser Coil mm 2550 X 1070
Evaporator Coil mm 2550 X 798
Face Velocity Coil Evap m/s 2.57
ELECTRICAL POWERING 415/3/50
Compressor (RLA / FLA) A 54/100
Supply Fan (FLA) A 15.6
Exhaust Fan (FLA) A 15.6
Condenser Fan (FLA) A 3
Nominal Running Current A 89.2/88.2/88.2
Total Full Load Amps A 135.2/134.2/134.2
SOUND LEVEL
Sound Pressure Level Intake @ 4m dB (A) 63
Sound Pressure Level Exhaust @ 1m dB (A) 78
POOLPACTM SCHEMATICS & DIMENSIONS
Standard
UNIT DIMENSION (mm) and Weight (kg)
Body Width (E) / Overall Width (F) 3350 / 3550
Body Depth (G) / Overall Depth (H) 2270 / 2350
Body Height (I) / Overall Height (J) 2110 / 2210
Weight (kg) 1850
SPIGOT SIZES (mm)
Supply Air (C x D1) 2500 x 740
Return Air (A x B2) 3250 x 800
Exhaust (C x D2) 2500 x 1060
Outdoor (A x B1) 3250 x 975
CLEARANCE REQUIREMENT (mm)
Minimum LHS Requirement 2000
Minimum RHS Requirement 1000
BASE FRAME DRAWING
Air Change Australia Pty Ltd accept no responsibility for possible errors in catalogues, brochures and other printed material. Air Change Australia Pty Ltd reserves the right to alter its products without notice.
POOLPAC TM
– TECHNICAL DATA
ACPP6500 TECHNICAL SPECIFICATIONS UNIT VALUE
Supply Air L/s 6500
Return Air L/s 6500
Outdoor Air L/s 6500
Condenser Air L/s 2300
Exhaust Air – (RA + CA) L/s 8800
Compressor Qty 2
Refrigerant Charge (R407C) kg/Comp 11.0
Total Compressor Capacity kWr 96
OUTDOOR AIR TO SUPPLY AIR
Pressure Drop Heat Exchanger Pa 243
Pressure Drop Evaporator Coil Pa 140
External Static Pressure Up to Pa 350
Total Pressure on Supply Fan Pa 733
SUPPLY FAN
Fan Speed (max) rpm 1200
Motor Power kW 11.0
Motor Poles 4
Motor Torques Nm 82.3
RETURN AIR TO EXHAUST AIR
Pressure Drop Heat Exchanger Pa 243
Pressure Drop Condenser Coil Pa 140
External Static Pressure Up to Pa 350
Total Pressure on Exhaust Fan Pa 733
EXHAUST FAN
Fan Speed (max) rpm 1200
Motor Power kW 15.0
Motor Poles 4
Motor Torques Nm 82.3
CONDENSER AIR
Fan Qty N/A
Air Flow L/s N/A
Fan Speed N/A
COIL SIZE
Condenser Coil mm 3410 X 965
Evaporator Coil mm 3410 X 790
Face Velocity Coil Evap m/s 2.41
ELECTRICAL POWERING 415/3/50
Compressor (RLA / FLA) A 45.6/70
Supply Fan (FLA) A 20.7
Exhaust Fan (FLA) A 27.6
Condenser Fan (FLA) A N/A
Nominal Running Current A 94.9/93.9/93.9
Total Full Load Amps A 119.3/118.3/118.3
SOUND LEVEL
Sound Power Level Supply In Duct dB 101.3
Sound Power Level Exhaust Free Field dB 96.9
POOLPACTM SCHEMATICS & DIMENSIONS
Standard
UNIT DIMENSION (mm) and Weight (kg)
Body Width (E) / Overall Width (F) 4000 / 4200
Body Depth (G) / Overall Depth (H) 2270 / 2350
Body Height (I) / Overall Height (J) 1970 / 2120
Weight (kg) 2700
SPIGOT SIZES (mm)
Supply Air (C x D1) 3360 x 740
Return Air (A x B2) 3900 x 620
Exhaust (C x D2) 3360 x 920
Outdoor (A x B1) 3900 x 945
CLEARANCE REQUIREMENT (mm)
Minimum LHS Requirement 1500
Minimum RHS Requirement 1000
BASE FRAME DRAWING