polyester cabinets plahimel 9 general product chart pla no. of doors totally closed open plinth...

polyestercabinets

PLA

Profit from the benefits of the newpolyester cabinets PLA

Suitable for outdoor applicationsStrength and high resistance to corrosiveenvironmentsEasy machining and installationProtected against accidental contacts

Totally closed cabinets

IP-65

40 sizes / 112 modelsdimensions from 500 x 500 x 320to 1500 × 1250 × 420 mm


Open plinth bottomcabinetsIP-54

Self-ventilated top withcanopy and open plinthbottom to IP-44

c Hot moulded reinforced polyester cabinets to grey RAL 7032.

c Protection degree ranges from IP-44 to IP-65 depending onthe construction system, according to IEC 529 (EN 60.529).

c High mechanical resistance against impact, IK 10 (20 J).

c Lock outside gasketed area.

c Prepared to fit various installation systems.

Construction systems


All of our experienceinto one range

Various versions for functionality and versatility are obtained thanks to agreat number of components.

ccccc front door cabinetsplain, glazed or ribbed door

ccccc front and back door cabinetsplain or ribbed door

Our offer provides you a very widechoice based on:c A comprehensive dimensional range, various construction

systems and a large number of versions

c Functional installation systems with mounting plates,universal chassis, distribution chassis, 19" racks, internaldoors, etc.

c All the necessary components to install these cabinets:bases, plinths, canopies, lighting devices.

c Customised cabinets on request: special drillings andopenings for fixing of equipments, assemblies, mounting ofaccessories at the works and special colours from RALchart.

Versions

PLA

Meet all qualitystandardsThe PLA cabinet has beendesigned, tested andmanufactured according tointernational standards.

ccccc EN 50.298: Empty enclosures forlow tension switchboards.

ccccc IEC-439-1: Insulation of thewhole enclosure. Low tensioninstallations (max. 1000V A.C. and1500V D.C.).

ccccc IEC-439-5: Outside and publicsites installations. Equipment fordistribution networks.

ccccc EN 60.529: Protection degreeprovided by enclosures (IP rating).

ccccc EN 50.102: Protection degreeprovided by enclosures againstmechanical impact (IK rating).

Approvals:

… under way.

PLA has been designed to preventunauthorised access to the insideequipment.

The locking system has beendesigned to protect the cabinetsfrom vandalism.

Among the various locktransformations available wewould highlight the versionprovided with a trap that coversthe locking device which frees thehandle.

IP-44 self-ventilated models arefitted with special reinforcementslocated between the door the bodyof the cabinet to prevent forcing ofthe door.

PLA cabinets are specially suitableto protect equipment for publiclighting and traffic controlapplications in urbanenvironments.

Safety

central upright

Resistance long lastingGuaranteed strength

PLA cabinets offer superiormechanical resistance againstimpacts, which makes themsuitable for urban applications.A compact structure of thedifferent components of thecabinet, the design of thereinforcements along with thethickness of the material guaranteean excellent rigidity and resistance.

Two door cabinets have an uprightin the middle for improved rigidity.PLA cabinets are particulary suitablefor installations on aggressive harshenvironments, such as chemical,paper mills, cement and oil plants…

handle lock

Detail ofreinforcement

No access tounauthorised personnel

Features and benefits

detail of built-inreinforcements

Watertightness

The IP-65 rating ensured through agasket which shape and materialhave been specially designed. Thegreater the outside pressure(water), the greater the pressure ofthe gasket against its location.

c High resistance againstaggressive environmentsPLA cabinets are particularlysuitable for industrial applicationswhere the exposure to corrosivechemical agents, weather, etc. isconstant.

Ribbed door

The shape of the surface makesfixing of posters and bills difficult.Also, the extra thickness ofpolyester required by this patternincreases the strength of thecabinet.

detail of canopy toprevent entry of

foreign matter

c Excellent resistance to weatherPermanent exposure to severeweather conditions: sunshine,temperature, rain, salt, etc.

Self ventilationSelf ventilation is obtained in thesecabinets with the provision ofopening on the top of the cabinets(protected by a canopy), thuspreventing internal condensationwhile still providing an IP-44 rating.

Full access through 180o dooropening.

PLAgasket EPDM

lock outside thegasketed area

Mounting plates

Metal, insulating and perforatedmounting plates to fit directly to theback of the cabinets or the depthadjustable supports.

Strong rack system prepared tomount 19" equipment. Fixed andswing models available. Capacityfrom 8 up to 25 units.

Metal 19" racks

Aluminium internal doors withpolyester-epoxy painted toRAL-7032.

Internal doors

Universal chassis prepared to fitPLA cabinets, either directly to theback or onto the depth adjustablesupports (25 mm. pitch), allowmounting of equipment onmounting plate and/or DIN rail.

Universal chassissystems

Distribution system to fit allnecessary components to makedistribution panels. They fit a metalchassis with quick fixing protectioncovers, DIN rails and mountingplates mounted on depthadjustable supports, with distancebetween rows of 150 mm.

Capacity from 57 up to 364 18 mm.units.

Distribution chassissystems

Bringing solutions to you…

s well as the thenew PLA cabinets, we

provide a comprehensiverange of installation systemsto satisfactorily meet yourinstallation demands:mounting plates, universalchassis, distribution chassis,19" racks and internal doors.

A

PLA

Cabinet assemblies and accessoriesCabinets may be joined side to side. They can be fitted completed with awide range of accessories, bases and plinths, canopies, rails, lightingdevices, door retainers and switch doors, intermediate trays and locktransformations.

We customise our rangec As well as the numerous versions you can choose from, on request wecan customize on request our cabinets:

c Mounting of accessories19" racks, distribution chassis, bases, plinths, etc.

c Drillings and cut-outsFor fitting of various equipment.

c ColourRAL chart available.

HIMEL

table of contents

Enclosure range page

General product chart 9

Product selection chart 10

Polyester cabinets PLA 14

Glazed door polyester cabinets PLA…KT 16

Open plinth bottom and closed toppolyester cabinets PLAZ… 18

Self-ventilated canopy top and open plinth bottompolyester cabinets PLAZ…T 20

Ribbed door and back, self-ventilated canopy topand open plinth bottom PLAZ…TR 22

Installation systems

Selection guide 12

Metal mounting plates 24

Insulating mounting plates 25

Universal chassis system 28

DLP distribution chassis system 30

19" rack system 34

Internal doors 36

AccessoriesBases and plinths 37

Canopies 38

Cable gland plates 38

Wall fixing brackets 39

Lighting 39

Door switches 39

Door retainers 40

Supporting trays 40

Watertight gaskets 40

Ground fixing frame 41

Joining of cabinets 41

Lifting of cabinets 41

Locks and transformations 42

8

9HIMEL

PLAgeneral product chart

no.of

doors

totallyclosed

open plinthbottom

self-ventilated topwith canopy and open

plinth bottom

door openingIP rating

totally closedwith

glazed door

ribbed door 120o

IP 65120o

IP 65120o

IP 54 180o

IP 44

plain door

nominaldimensions (mm)

Height Width Depth

500 500 320 1 PLA 553 PLA 553 KT PLAZ 553 PLAZ 553 T -

420 1 PLA 554 PLA 554 KT PLAZ 554 PLAZ 554 T -

750 320 1 PLA 573 PLA 573 KT PLAZ 573 PLAZ 573 T -






750 500 320 1 PLA 753 PLA 753 KT PLAZ 753 PLAZ 753 T PLAZ 753 TR

420 1 PLA 754 PLA 754 KT PLAZ 754 PLAZ 754 T PLAZ 754 TR

750 320 1 PLA 773 PLA 773 KT PLAZ 773 PLAZ 773 T PLAZ 773 TR






























10 HIMEL

door openingIP rating

door

ver

sion

s

Heightnominal dimensions (mm)

Width Depth

* 500 mm. doors are available on all versionsexcept ribbed ones

range of cabinets based on dimensions,versions and construction systems

dimensions (mm)

Height Width Depth

Door typebottom

PLA

ribbedfront and

back

PLA

height width depth 1000 500 420

closed top and bottom andglazed door

ref. PLA 1054 KT

height width depth 1250 750 320

self-ventilated top with canopy, -open plinth bottom, ribbed frontand back door

ref. PLAZ 1273 TPR

examples of cabinets

closed open plinthplain

front andback

ribbedglazedplain

top

closed self-ventilatedwith canopy

PLAZ-

- XX XX X - T - KT R P PR

PLA - 10 5 4 -

T

- KT - - -

PLAZ 12 7 3 -

-

- - - - PR

On the previous page are the mostused constructions in all dimensions.At the top of this page is a table toselect references, with some examplesto facilitate the formation of anyreference.There is also on this page anothergeneral chart with the constructionsystems on the horizontal axis and thevarious door versions on the verticalaxis, showing all the possiblereferences.The box marked in each dimension(height, width, depth) shows thenumerals to form the reference.The coloured boxes in grey and blueare the examples given in the aboveselection chart.

selection ofreferences

Plain doorPLA/PLAZ...

Glazed door

PLA / PLAZ...KT

Ribbed doorPLA / PLAZ...R

Plain frontand backdoor

PLA / PLAZ...P

Ribbed frontand back door

PLA / PLAZ...PR

construction systems

320

420

500

750

1000

1250

750

1000

1250

1500

500*

11HIMEL

closed top

120o

IP 65

PLA 1054

PLA 1054 KT

PLA 1054 R

PLA 1054 P

PLA 1273 PR

construction systems

self-ventilated top withcanopy

closed top self-ventilated top withcanopy

120o

IP 54120o

IP 54

PLA 1054T

PLA 1054 TKT

PLA 1054 TR

PLA 1054 TP

PLA 1273 TPR

PLAZ 1054

PLAZ 1054 KT

PLAZ 1054 R

PLAZ 1054 P

PLAZ 1273 PR

PLAZ 1054T

PLAZ 1054 TKT

PLAZ 1054 TR

PLAZ 1054 TP

PLAZ 1273 TPR

○ ○ ○ ○ ○ ○ ○○

○

○

○

○

○

○

○

○

○

○ ○ ○ ○ ○ ○ ○○

○

○

○

○

○

○

○

○

PLA...

180o

IP 44

PLA...T PLAZ...

closed bottom cabinets open plinth bottom

PLAZ...T

12 HIMEL

selection of installation systemsand accessories

nominaldimensions (mm) no. of

doors

PLA

500 500 320 1 PMM 55 PMB 55 PMR 55 - - -

420 1 PMM 55 PMB 55 PMR 55 - - -

750 320 1 PMM 75 PMB 75 PMR 57 - - -

420 1 PMM 75 PMB 75 PMR 57 - - -

1000 320 2 PMM 510 PMB 510 PMR 55 + PMR 55 - - -

420 2 PMM 510 PMB 510 PMR 55 + PMR 55 - - -

1250 320 2 PMM 55 + PMM 75 PMB 55 + PMB 75 PMR 55 + PMR 57 - - -

420 2 PMM 55 + PMM 75 PMB 55 + PMB 75 PMR 55 + PMR 57 - - -

750 500 320 1 PMM 75 PMB 75 PMR 75 MOL 75 DLP 57/76 57/76

420 1 PMM 75 PMB 75 PMR 75 MOL 75 DLP 57/76 57/76

750 320 1 PMM 77 PMB 77 PMR 77 MOL 75 DLP 99/132 99/132


1000 320 2 PMM 710 PMB 71 PMR 75 + PMR 75 MOL 75 DLP 57/76 + DLP 57/76 114/152

420 2 PMM 710 PMB 710 PMR 75 + PMR 75 MOL 75 DLP 57/76 + DLP 57/76 114/152



1000 500 320 1 PMM 105 PMB 105 PMR 105 MOL 100 DLP 95/114 95/114


750 320 1 PMM 107 PMB 107 PMR 107 MOL 100 DLP 165/198 165/198






1250 500 320 1 PMM 125 PMB 125 PMR 125 MOL 125 DLP 114 P/133 114/133

420 1 PMM 125 PMB 125 PMR 125 MOL 125 DLP 114 P/133 114/133

750 320 1 PMM 127 PMB 127 PMR 127 MOL 125 DLP 198 P/231 198/231

420 1 PMM 127 PMB 127 PMR 127 MOL 125 DLP 198P/231 198/231

1000 320 2 PMM 1210 PMB 1210 PMR 125 + PMR 125 MOL 125 DLP 114P/133 + DLP 114P/133 228/266

420 2 PMM 1210 PMB 1210 PMR 125 + PMR 125 MOL 125 DLP 114P/133 + DLP 114P/133 228/266

1250 320 2 PMM 1212 PMB 1212 PMR 125 + PMR 127 MOL 125 DLP 114P/133 + DLP 198P/231 312/364

420 2 PMM 1212 PMB 1212 PMR 125 + PMR 127 MOL 125 DLP 114P/133 + DLP 198P/231 312/364

1500 500 320 1 PMM 155 PMB 155 PMR 155 MOL 150 - -

420 1 PMM 155 PMB 155 PMR 155 MOL 150 - -

750 320 1 PMM 157 PMB 157 PMR 157 MOL 150 - -

420 1 PMM 157 PMB 157 PMR 157 MOL 150 - -

1000 320 2 PMM 1510 PMB 1510 PMR 155 + PMR 155 MOL 150 - -

420 2 PMM 1510 PMB 1510 PMR 155 + PMR 155 MOL 150 - -

1250 320 2 PMM 1512 PMB 1512 PMR 155 + PMR 157 MOL 150 - -

420 2 PMM 1512 PMB 1512 PMR 155 + PMR 157 MOL 150 - -

metalmounting

plate

insulatingmounting

plate

perforatedmounting

plate

set of 2uprights foruniversalchassis

reference no. of18 mm. units

modular distribution chassis

Height Width Depth

13HIMEL

PIPLA 55 ZNPLA 53 ZHPLA 53 TJPLA 53


BRF 8 PLA 8 - - PIPLA 57 ZNPLA 73 ZHPLA 73 TJPLA 73

BRF 8 PLA 8 BRP 7 PLA 7 PIPLA 57 ZNPLA 74 ZHPLA 74 TJPLA 74

PIPLA 55 + PIPLA 55 ZNPLA 103 ZHPLA 103 TJPLA 103




































canopiesplinths (2)bases (1)internaldoors

no. of units(1U=44,45 mm.)

swingno. of units(1U=44,45 mm.)

fixed

19" racks

(1) for closed bottom PLA… Cabinets only.(2) for open plinth bottom PLAZ… cabinets only.

14 HIMEL

PLA...

Hot-moulded reinforced polyester cabinets■ grey to RAL 7032.■ conforms to general rules for emptyenclosures established by standardEN 50.298.■ IP-65 according to IEC (EN 60.529).■ high degree of resistance to mechanicalimpacts IK10(20J) according to EN 50.102.■ self-extinguishing according toIEC 695-2-1(960o).■ wide range of operating temperatures-50 to 150oC.■ resistance to main chemical agents andcorrosive environments.■ resistant to uv rays.■ suitable for double insulation assembliesaccording to standardIEC 439-1(EN 60.439.1).■ reversible door with 120o opening. Max.load 30 Kg/m2..

■ lock outside the gasketed area with2-point locking system on cabinets up to750 mm high and 4-point as from 1000 mm.■ bosses for M8 inserts inside of thecabinet for direct fixing of mounting plates,accessories, etc.■ allows direct floor fixing or on ZNPLA base.■ wall fixing though FMPLA brackets.

Configuration■ cabinet with closed top and bottom, fittedwith watertight gasket.■ reversible plain door with two hinges incabinets up to 750 high and 4 in cabinetsas from 1000 mm.■ double bar lock operated by means ofLDB5. Other transformations and handlelocks available.■ two-door cabinets include a centralupright.

500 500 320 1 PLA 553

500 500 420 1 PLA 554

500 750 320 1 PLA 573

500 750 420 1 PLA 574

500 1000 320 2 PLA 5103

500 1000 420 2 PLA 5104

500 1250 320 2 PLA 5123

500 1250 420 2 PLA 5124

750 500 320 1 PLA 753

750 500 420 1 PLA 754

750 750 320 1 PLA 773

750 750 420 1 PLA 774

750 1000 320 2 PLA 7103

750 1000 420 2 PLA 7104

750 1250 320 2 PLA 7123

750 1250 420 2 PLA 7124

1000 500 320 1 PLA 1053

1000 500 420 1 PLA 1054

1000 750 320 1 PLA 1073

1000 750 420 1 PLA 1074

1000 1000 320 2 PLA 10103

1000 1000 420 2 PLA 10104

1000 1250 320 2 PLA 10123

1000 1250 420 2 PLA 10124

1250 500 320 1 PLA 1253

1250 500 420 1 PLA 1254

1250 750 320 1 PLA 1273

1250 750 420 1 PLA 1274

1250 1000 320 2 PLA 12103

1250 1000 420 2 PLA 12104

1250 1250 320 2 PLA 12123

1250 1250 420 2 PLA 12124

1500 500 320 1 PLA 1553

1500 500 420 1 PLA 1554

1500 750 320 1 PLA 1573

1500 750 420 1 PLA 1574

1500 1000 320 2 PLA 15103

1500 1000 420 2 PLA 15104

1500 1250 320 2 PLA 15123

1500 1250 420 2 PLA 15124

polyester cabinetsIP-65 (IEC-529)

nominal dimensions (mm) no.height width depth doors reference

(A) (B) (C)


(A) (B) (C)

dimensions, models and references nominal dimensions (mm) no.height width depth doors reference

(A) (B) (C)

15HIMEL

PLA...

Detail of mounting plate fixing through depthadjustable supports.

Double bar lock outside the gasketed area.Handle locks and other transformations areavailable.

B-150

75

2

1

2

4

B-95

dimensions (mm)

polyester cabinetsIP-65 (IEC-529)

* for reinforced mounting plates

Bosses on the back of cabinets as from 1000 mm wide allow fixing of partialmounting plates (see relevant section). Bosses at the top and bottom are for fixingof depth adjustable supports, internal doors, 19 " racks. In general, all bossesincluding those on sides and doors are prepared for M8 inserts ref.: TEX 8 for fixingof various equipment.

1

systems and accessories for PLA cabinetsdescription page no. description page no.

ccccc bases 37ccccc canopies 38ccccc wall fixing brackets 39ccccc lighting 39ccccc door retainer 40ccccc supporting tray 40

ccccc joining of cabinets 41ccccc lifting of cabinets 41ccccc locks 42

description page no.

ccccc mounting plates 24ccccc depth adjustable supports 27ccccc universal chassis systems 28ccccc distribution chassis systems 30ccccc 19 " rack systems 34ccccc internal doors 36

Detail of 120o hinge with stainless steelsafety pin easily removable Gasketguaranteeing IP-65.

Bosses with M8 inserts for fixing of mounting plate.

Centres for floor or plinth fixing.

Centres of door opening.

2

3

4

16 HIMEL

glazed door polyester cabinetsIP-65 (IEC-529)

PLA…KT

Hot-moulded reinforced polyester cabinets■ grey to RAL 7032.■ conforms to general rules for emptyenclosures established by standardEN 50.298.■ IP-65 according to IEC (EN60.529).■ high degree of resistance to mechanicalimpacts IK 8 (5J) according to EN50.102.■ self-extinguishing according toIEC695-2-1(960o).■ wide range of operating temperatures-50 to 150oC.■ resistance to main chemical agents andcorrosive environments.■ resistant to uv rays.■ suitable for double insulation assembliesaccording to standardIEC 439-1 (EN 60.439.1).■ reversible door with 120o opening.■ lock outside the gasketed area with2-point locking system on cabinets up to 750mm high and 4-point as from 1000 mm.■ bosses for M8 inserts inside of the cabinetfor direct fixing of mounting plates,accessories, etc.■ allows direct fixing to ground or rootburying plinths ZNPLA.■ wall fixing though FMPLA brackets.

■ Cabinet with top and bottom totally closed.■ watertight gasket.■ reversible glazed door with double barlock (key LDB5). Other lock transformationsavailable.■ 2 door cabinets fit an upright in the middle.

Other versions■ ref.: PLA…TKT, PLAZ…KT andPLAZ…TKT see pages 11 and 12.

Composition

500 500 320 1 PLA 553 KT

500 500 420 1 PLA 554 KT

500 750 320 1 PLA 573 KT

500 750 420 1 PLA 574 KT

500 1000 320 2 PLA 5103 KT

500 1000 420 2 PLA 5104 KT

500 1250 320 2 PLA 5123 KT

500 1250 420 2 PLA 5124 KT

750 500 320 1 PLA 753 KT

750 500 420 1 PLA 754 KT

750 750 320 1 PLA 773 KT

750 750 420 1 PLA 774 KT

750 1000 320 2 PLA 7103 KT

750 1000 420 2 PLA 7104 KT

750 1250 320 2 PLA 7123 KT

750 1250 420 2 PLA 7124 KT

1000 500 320 1 PLA 1053 KT

1000 500 420 1 PLA 1054 KT

1000 750 320 1 PLA 1073 KT

1000 750 420 1 PLA 1074 KT

1000 1000 320 2 PLA 10103 KT

1000 1000 420 2 PLA 10104 KT

1000 1250 320 2 PLA 10123 KT

1000 1250 420 2 PLA 10124 KT

1250 500 320 1 PLA 1253 KT

1250 500 420 1 PLA 1254 KT

1250 750 320 1 PLA 1273 KT

1250 750 420 1 PLA 1274 KT

1250 1000 320 2 PLA 12103 KT

1250 1000 420 2 PLA 12104 KT

1250 1250 320 2 PLA 12123 KT

1250 1250 420 2 PLA 12124 KT

1500 500 320 1 PLA 1553 KT

1500 500 420 1 PLA 1554 KT

1500 750 320 1 PLA 1573 KT

1500 750 420 1 PLA 1574 KT

1500 1000 320 2 PLA 15103 KT

1500 1000 420 2 PLA 15104 KT

1500 1250 320 2 PLA 15123 KT

1500 1250 420 2 PLA 15124 KT


(A) (B) (C)


(A) (B) (C)


(A) (B) (C)

17HIMEL

PLA…KT

Detail of fixing of glazed door. Glazed door cabinets for viewing ofequipment inside.

19” swing rack mounted in KT cabinet.

dimensions (mm)

glazed door polyester cabinetsIP-65 (IEC-529)



1

systems and accessories for PLA cabinetsdescription page no. description page no.

ccccc bases 37ccccc canopies 38ccccc wall fixing brackets 39ccccc lighting 39ccccc door retainer 40ccccc supporting tray 40

ccccc joining of cabinets 41ccccc lifting of cabinets 41ccccc locks 42






2

3

4

A-1

50

B-150

37,5

C-13

25

28,5

C

A260

28,521

25

A-2

55

C-140

C-42

B-95

A-9

5

A-2

53

285/535

A-1

50

B-150

75

A-9

5

B-95A-2

53

285 285/535

1

4

2

1 1

4

2

1

1

B-120

C-1

25C-1

40

B-295

M8

B = 500 / 750

17 / 28*B-120

C-1

25C-1

40

B-295

M840

B =1000/1250

500/750

405 405/655

500

37

3

3

1

1

3

311

1 1

4 4

18 HIMEL

open plinth bottom and closed toppolyester cabinetsIP-54 (IEC-529)

PLAZ…

500 500 320 1 PLAZ 553

500 500 420 1 PLAZ 554

500 750 320 1 PLAZ 573

500 750 420 1 PLAZ 574

500 1000 320 2 PLAZ 5103

500 1000 420 2 PLAZ 5104

500 1250 320 2 PLAZ 5123

500 1250 420 2 PLAZ 5124

750 500 320 1 PLAZ 753

750 500 420 1 PLAZ 754

750 750 320 1 PLAZ 773

750 750 420 1 PLAZ 774

750 1000 320 2 PLAZ 7103

750 1000 420 2 PLAZ 7104

750 1250 320 2 PLAZ 7123

750 1250 420 2 PLAZ 7124

1000 500 320 1 PLAZ 1053

1000 500 420 1 PLAZ 1054

1000 750 320 1 PLAZ 1073

1000 750 420 1 PLAZ 1074

1000 1000 320 2 PLAZ 10103

1000 1000 420 2 PLAZ 10104

1000 1250 320 2 PLAZ 10123

1000 1250 420 2 PLAZ 10124

1250 500 320 1 PLAZ 1253

1250 500 420 1 PLAZ 1254

1250 750 320 1 PLAZ 1273

1250 750 420 1 PLAZ 1274

1250 1000 320 2 PLAZ 12103

1250 1000 420 2 PLAZ 12104

1250 1250 320 2 PLAZ 12123

1250 1250 420 2 PLAZ 12124

1500 500 320 1 PLAZ 1553

1500 500 420 1 PLAZ 1554

1500 750 320 1 PLAZ 1573

1500 750 420 1 PLAZ 1574

1500 1000 320 2 PLAZ 15103

1500 1000 420 2 PLAZ 15104

1500 1250 320 2 PLAZ 15123

1500 1250 420 2 PLAZ 15124

Hot-moulded reinforced polyester cabinets■ grey to RAL 7032.■ conforms to general rules for emptyenclosures established by standardEN 50.298.■ IP-54 according to IEC 529 (EN 60.529).■ high degree of resistance to mechanicalimpacts IK10(20J) according to EN50.102.■ self-extinguishing according toIEC 695-2-1(960o).■ wide range of operating temperatures-50 to 150oC.■ resistance to main chemical agents andcorrosive environments.■ resistant to uv rays.■ suitable for double insulation assembliesaccording to standardIEC 439-1(EN 60.439.1).■ reversible door with 120º opening. Maxload 30 Kg/m2.

■ lock outside the gasketed area with2-point locking system on cabinets up to750 mm high and 4-point as from 1000 mm.■ bosses for M8 inserts inside of thecabinet for direct fixing of mounting plates,accessories, etc.■ allow direct fixing to root burying ZHPLAplinths.■ wall fixing though FMPLA brackets.

Composition■ closed top.■ open plinth bottom.■ with gasket.■ plain door with 2 hinges up to 750 mm.high and 4 as from 1000.■ standard handle double bar lock. Otherlock transformations are available.■ two-door cabinets include a centralupright.


(A) (B) (C)


(A) (B) (C)


(A) (B) (C)

19HIMEL

open plinth bottom and closed toppolyester cabinetsIP-54 (IEC-529)

PLAZ…

Detail of bosses on the door for fixing ofvarious equipment through M8 inserts(TEX8).

B-150

A-1

50

A-1

50

B-60B-60

C-1

60

C-1

60

37,5

A-1

50

B-150

75

C-42

C-8 260

25

A-2

55

C-140

A+

55

28,5

C

28,521

23 / 28*

M8

B = 500/750

B =1000/1250

500 500/750

405 405/655

C-6

8

B-81

C-6

8

B-81

M840

37

55

6.5 6.5

6.5 6.5

B-95

A-9

5

A-9

5

B-95

1

4

2

1

1

4

2

1

1

3

44

3

3

3

dimensions (mm)



1

systems and accessories for PLAZ… cabinetsdescription page no. description page no.

ccccc plinths 37ccccc canopies 38ccccc cable gland plates 38ccccc wall fixing brackets 39ccccc lighting 39ccccc door retainer 40

ccccc supporting tray 40ccccc ground fixing frame 41ccccc joining of cabinets 41ccccc lifting of cabinets 41ccccc locks 42



Detail of open bottom for undergroundincoming cables. Direct fixing to ground,leaving door at 65 mm. from it.

Detail of perforated mounting plate fixingthrough depth adjustable supports.




2

3

4

20 HIMEL

PLAZ…Tself-ventilated canopy top and openplinth bottom polyester cabinetsIP-44 (IEC-529)

Hot-moulded reinforced polyester cabinets■ grey to RAL 7032.■ self-ventilated cabinet.■ conforms to general rules for emptyenclosures established by standardEN 50.298.■ IP-44 according to IEC 539 (EN 60.529).Possibility to upgrade to IP-54 trough JPLAgasket.■ high degree of resistance to mechanicalimpacts IK10 (20J) according to EN 50.102.■ self-extinguishing according toIEC 695-2-1(960o).■ prepared for outside applications andpublic sites according to ICE-439-5(EN 60. 439.5) standard.

■ wide range of operating temperatures -50to 150oC.■ resistance to main chemical agents andcorrosive atmospheres.■ resistant to uv rays.■ suitable for double insulation assembliesaccording to standardIEC 439-1(EN 60.439.1).■ reversible door with 180o opening. Max.load 30 Kg/m2.■ lock outside the gasketed area with 2-pointlocking system on cabinets up to 750 mm highand 4-point as from 1000 mm.■ bosses for M8 inserts inside of the cabinetfor direct fixing of mounting plates,accessories, etc.

■ allow direct fixing to root burying ZHPLAplinths.■ wall fixing though FMPLA brackets.

Configuration■ open canopy top.■ open plinth bottom.■ without gasket.■ plain door with reinforced fixing againstvandalism.■ standard handle double bar lock. Otherlock transformations are available.■ two-door cabinets include a centralupright.

500 500 320 1 PLAZ 553 T

500 500 420 1 PLAZ 554 T

500 750 320 1 PLAZ 573 T

500 750 420 1 PLAZ 574 T

500 1000 320 2 PLAZ 5103 T

500 1000 420 2 PLAZ 5104 T

500 1250 320 2 PLAZ 5123 T

500 1250 420 2 PLAZ 5124 T

750 500 320 1 PLAZ 753 T

750 500 420 1 PLAZ 754 T

750 750 320 1 PLAZ 773 T

750 750 420 1 PLAZ 774 T

750 1000 320 2 PLAZ 7103 T

750 1000 420 2 PLAZ 7104 T

750 1250 320 2 PLAZ 7123 T

750 1250 420 2 PLAZ 7124 T

1000 500 320 1 PLAZ 1053 T

1000 500 420 1 PLAZ 1054 T

1000 750 320 1 PLAZ 1073 T

1000 750 420 1 PLAZ 1074 T

1000 1000 320 2 PLAZ 10103 T

1000 1000 420 2 PLAZ 10104 T

1000 1250 320 2 PLAZ 10123 T

1000 1250 420 2 PLAZ 10124 T

1250 500 320 1 PLAZ 1253 T

1250 500 420 1 PLAZ 1254 T

1250 750 320 1 PLAZ 1273 T

1250 750 420 1 PLAZ 1274 T

1250 1000 320 2 PLAZ 12103 T

1250 1000 420 2 PLAZ 12104 T

1250 1250 320 2 PLAZ 12123 T

1250 1250 420 2 PLAZ 12124 T

1500 500 320 1 PLAZ 1553 T

1500 500 420 1 PLAZ 1554 T

1500 750 320 1 PLAZ 1573 T

1500 750 420 1 PLAZ 1574 T

1500 1000 320 2 PLAZ 15103 T

1500 1000 420 2 PLAZ 15104 T

1500 1250 320 2 PLAZ 15123 T

1500 1250 420 2 PLAZ 15124 T


(A) (B) (C)


(A) (B) (C)


(A) (B) (C)

21HIMEL

PLAZ…T

B-95

A-9

5

A-9

5

B-95

B-150

A-1

50

37,5

B-60

C-1

60

23 / 28*

M8

B = 500/750

C-6

8

B-81

6.5 6.5

B-60

C-1

60

B =1000/1250

500 500/750

405 405/655

C-6

8

B-81

M840

37

6.5 6.5

A-1

50A

-150

B-150

75

C-42

C-8 260

25

A-2

55

C-140

A+

93

28,5

C

28,521

3855

1

4

2

1

1

4

2

1

1

3

44

3

3

3

dimensions (mm)

self-ventilated canopy top and openplinth bottom polyester cabinetsIP-44 (IEC-529)



1

systems and accessories for PLAZ…T cabinetsdescription page no. description page no.




ccccc mounting plates 24ccccc depth adjustable supports 27ccccc universal chassis systems 28ccccc distribution chassis systems 30ccccc 19" rack systems 34ccccc internal doors 36

1800 door opening for improved access tothe inside.

Open plinth bottom with detail of doorreinforcement against vandalism.




2

3

4

Detail of lock with trap to free handle.

22 HIMEL

PLAZ…TRribbed door and back polyestercabinets, self-ventilated canopy topand open plinth bottomIP-44 (IEC-529)

750 500 320 1 PLAZ 753 TR

750 500 420 1 PLAZ 754 TR

750 750 320 1 PLAZ 773 TR

750 750 420 1 PLAZ 774 TR

750 1000 320 2 PLAZ 7103 TR

750 1000 420 2 PLAZ 7104 TR

750 1250 320 2 PLAZ 7123 TR

750 1250 420 2 PLAZ 7124 TR

1000 500 320 1 PLAZ 1053 TR

1000 500 420 1 PLAZ 1054 TR

1000 750 320 1 PLAZ 1073 TR

1000 750 420 1 PLAZ 1074 TR

1000 1000 320 2 PLAZ 10103 TR

1000 1000 420 2 PLAZ 10104 TR

1000 1250 320 2 PLAZ 10123 TR

1000 1250 420 2 PLAZ 10124 TR

1250 500 320 1 PLAZ 1253 TR

1250 500 420 1 PLAZ 1254 TR

1250 750 320 1 PLAZ 1273 TR

1250 750 420 1 PLAZ 1274 TR

1250 1000 320 2 PLAZ 12103 TR

1250 1000 420 2 PLAZ 12104 TR


(A) (B) (C)


(A) (B) (C)

Hot-moulded reinforced polyester cabinets■ door and back with curved surfacesmaking difficult to stick posters.■ grey RAL 7032■ self-ventilated cabinet.■ conforms to general rules for emptyenclosures established by standardEN 50298.■ IP-44 according to IEC-529 (EN 60.529).Possibility to upgrade to IP-54 through JPLAgasket.■ high degree of resistance to mechanicalimpacts IK10 (20J) according to EN 50.102.■ self-extinguishing, according to IEC 695-2-1(960o).■ wide range of operating temperatures -50to 150oC.

■ resistant to main chemical agents andcorrosive environments■ resistant to ultraviolet light■ suitable for double insulation assembliesconforming to standard IEC 439-1(EN 60.439.1).■ prepared for outside applications andpublic sites according to IEC 439-5(EN 60.439.5) standard.■ reversible door with 1200 opening. Max.load 30 kg/m2.■ lock outside the gasketed area with 2-pointlocking system on cabinets up to 750 mmhigh an 4-point as from 1000 mm.■ allow direct fixing to root burying plinthsZHPLA .■ bosses for M8 inserts inside of the cabinet

for direct fixing of mounting plates,accessories, etc.■ wall fixing through FMPLA brackets.

Composition■ open top with canopy■ open plinth bottom■ without watertight gasket to allowself-ventilation.■ plain door with reinforcement to preventforcing of the door.■ double bar standard lock. Other locktransformations are available.■ 2 door cabinets fit an upright in the middle.

1250 1250 320 2 PLAZ 12123 TR

1250 1250 420 2 PLAZ 12124 TR

1500 500 320 1 PLAZ 1553 TR

1500 500 420 1 PLAZ 1554 TR

1500 750 320 1 PLAZ 1573 TR

1500 750 420 1 PLAZ 1574 TR

1500 1000 320 2 PLAZ 15103 TR

1500 1000 420 2 PLAZ 15104 TR

1500 1250 320 2 PLAZ 15123 TR

1500 1250 320 2 PLAZ 15124 TR


(A) (B) (C)

23HIMEL

Detail of canopy and opening of the topallowing for self-ventilation and IP44.

Detail of open bottom for access ofunderground cables. The plinth botttomallows fixing to floor through MFPLAZ groundfixing frame leaving the lower end of the doorat 65 mm the floor.

PLAZ…TRribbed door and back polyestercabinets, self-ventilated canopytop and open plinth bottomIP-44 (IEC-529)

B-150

A-1

50

B-95

A-9

5

37,5

A-1

50A

-150

B-150

A-9

5B-95

75

1

4

2

1

1

4

2

1

1

C-42

C-8 260

25

A-2

55

C-140

A+

93

28,5

C

28,521

3855

B-60

C-1

60

B =1000/1250

500 500/750

405 405/655

C-6

8

B-81

M840

37

6.5 6.5

3

44

3

B-60

C-1

60

23 / 28*

M8

B = 500/750

C-6

8

B-81

6.5 6.5

3

3

dimensions (mm)





2

3

4


1

systems and accessories for PLAZ…TR cabinetsdescription page no. description page no.





Ribbed door to make fixing of poster difficult.The greater thickness improves also therigidity of the cabinet.

24 HIMEL

metal mounting plates PLA

metal mounting platesMade of galvanized steel, with reinforcementfold on models as from 1000mm high. Fitdirectly the back of the cabinets or the depthadjustable supports. On 2-door cabinets, afull or 2 partial plates can be fitted (seechart).Cabinets as from 1000mm high are providedwith bosses in the middle for fitting PMMplates shorter than the nominal height of thecabinet (see note(1) below). In such case,inserts Ref: TEX 8 must be orderedseparately.■ maximum load 150 kg/m2.

as fromPMM1010

(1) Cabinets 1000, 1250 and 1500 mm high allow the following partial mounting plates: 2 PMM 500 mm high; 1 × 500 + 1 × 750 or 2 × 750 mm. high respectively, allfixed to the back of the cabinet.

500 500 1 PMM 55 1 - - 390 375 350 350 ---- - 2 2,5 500 750 1 PMM 75 1 - - 390 625 350 600 ---- - 2 3,8500 1000 2 PMM 510 2 PMM 55 + PMM 55 1 390 875 350 ----- 437,5 2,5 6,3500 1250 2 - - PMM 55 + PMM 75 1 ----- ----- ----- ----- ---- - ----- - --750 500 1 PMM 75 1 - - 640 375 600 350 ---- - 2 3,8750 750 1 PMM 77 1 - - 640 625 600 600 ---- - 2,5 7,8750 1000 2 PMM 710 2 PMM 75 + PMM 75 1 640 875 600 ----- 437,5 2,5 10,6750 1250 2 PMM 712 2 PMM 75 + PMM 77 1 640 1125 600 ----- 687,5 2,5 17,6

1000 500 1 PMM 105 1 - - 890 375 850 350 ---- - 2,5 6,51000 750 1 PMM 107 1 - - 890 625 850 600 ---- - 2,5 10,81000 1000 2 PMM 1010 2 PMM 105 + PMM 105 1 890 875 850 ----- 437,5 2,5 151000 1250 2 PMM 1012 2 PMM 105 + PMM 107 1 890 1125 850 ----- 687,5 2,5 19,31250 500 1 PMM 125 1 - - 1125 375 1100 350 ---- - 2,5 8,61250 750 1 PMM 127 1 - - 1125 625 1100 600 ---- - 2,5 14,21250 1000 2 PMM 1210 2 PMM 125 + PMM 125 1 1125 875 1100 ----- 437,5 2,5 19,41250 1250 2 PMM 1212 2 PMM 125 + PMM 127 1 1125 1125 1100 ----- 687,5 2,5 24,91500 500 1 PMM 155 1 - - 1375 375 1350 350 ---- - 2,5 10,61500 750 1 PMM 157 1 - - 1375 625 1350 600 ---- - 2,5 17,31500 1000 2 PMM 1510 2 PMM 155 + PMM 155 1 1375 875 1350 ----- 437,5 2,5 23,81500 1250 2 PMM 1512 2 PMM 155 + PMM 157 1 1375 1125 1350 ----- 687,5 2,5 30,5

to fit tocabinets (1)

height (A) width (B)

no.doors

reference fig no. reference fig no. D E F G H e(mm) (Kg)

mounting platemounting plate for2-door cabinets full mounting plate

G

E

D F

350

437,5

H-87,5

H

E

e10,5

150

100

75

12,5

10,5 25 25

2525

25

25

25

25

Ø6,5

Ø8,5

Ø6,5

Ø8,5

150

100

75

10,5

2525

10,5

25 25

Ø 6,5

Ø 8,5

Ø 6,5Ø 8,5

fig. 2fig. 1

25HIMEL

insulating mounting plates PLA

(1) Cabinets 1000, 1250 and 1500 mm high allow the following partial mounting plates: 2 PMB 500 mm high; 1 × 500 + 1 × 750 or 2 × 750 mm. high respectively, allfixed to the back of the cabinet.

500 500 1 PMB 55 1 - - 390 375 350 350 ---- - 4 0,9 500 750 1 PMB 75 1 - - 390 625 350 600 ---- - 4 1,3500 1000 2 PMB 510 2 PMB 55 + PMB 55 1 390 875 350 ----- 437,5 5 2,4500 1250 2 - - PMB 55 + PMB 75 1 ----- ----- ----- ----- ---- - - -750 500 1 PMB 75 1 - - 640 375 600 350 ---- - 4 1,3750 750 1 PMB 77 1 - - 640 625 600 600 ---- - 5 2,8750 1000 2 PMB 710 2 PMB 75 + PMB 75 1 640 875 600 ----- 437,5 5 3,9750 1250 2 PMB 712 2 PMB 75 + PMB 77 1 640 1125 600 ----- 687,5 5 5

1000 500 1 PMB 105 1 - - 890 375 850 350 ---- - 5 2,31000 750 1 PMB 107 1 - - 890 625 850 600 ---- - 5 3,91000 1000 2 PMB 1010 2 PMB 105 + PMB 105 1 890 875 850 ----- 437,5 5 5,51000 1250 2 PMB 1012 2 PMB 105 + PMB 107 1 890 1125 850 ----- 687,5 5 7,11250 500 1 PMB 125 1 - - 1125 375 1100 350 ---- - 5 31250 750 1 PMB 127 1 - - 1125 625 1100 600 ---- - 5 51250 1000 2 PMB 1210 2 PMB 125 + PMB 125 1 1125 875 1100 ----- 437,5 5 71250 1250 2 PMB 1212 2 PMB 125 + PMB 127 1 1125 1125 1100 ----- 687,5 5 91500 500 1 PMB 155 1 - - 1375 375 1350 350 ---- - 5 3,71500 750 1 PMB 157 1 - - 1375 625 1350 600 ---- - 5 6,11500 1000 2 PMB 1510 2 PMB 155 + PMB 155 1 1375 875 1350 ----- 437,5 5 8,61500 1250 2 PMB 1512 2 PMB 155 + PMB 157 1 1375 1125 1350 ----- 687,5 5 11



no.doors

reference fig no. reference fig no. D E F G H e(mm) (Kg)

mounting plate full mounting plate

G

E

D F

350

437,5

H-87,5

H

E

e10,510,5

150

100

75

150

100

7510,5

10,5

mounting plate for2-door cabinets

insulating mounting platesMade of bakelite to black RAL-9005. Fitdirectly to the back of the cabinets or thedepth adjustable supports. On 2-doorcabinets, a full or 2 partial plates can befitted (see chart).Cabinets as from 1000mm high are providedwith bosses in the middle for fitting PMBplates shorter than the nominal height of thecabinet (see note(1) below). In such case,inserts Ref: TEX 8 must be orderedseparately.■ maximum load 150 kg/m2.

fig. 2fig. 1

26 HIMEL

PLA...perforated mounting plates

FD

G

E

15

fixing accessories for perforated plates

fixing nut fixing screw and washer

metricpack lenght pack

sizeqty. (mm) qty.

M3 TFP 3 100 - - -

M4 TFP 4 100TOR 10/4 A 10 100TOR 16/4 A 16 100

M5 TFP 5 100TOR 12/5 A 12 100TOR 18/5 A 18 100

M6 TFP 6 100TOR 12/6 A 12 100TOR 18/6 A 18 100

Detail of PMR plate with TFP nut. The layoutof the holes allow for all fixing centres.

perforated mounting platesSpecially designed for quick fixing ofequipment through nuts TFP. Made ofbichromated zinc steel.Fit directly the back of the cabinets or thedepth adjustable supports. On 2-doorcabinets, a full or 2 partial plates can befitted (see chart).Cabinets as from 1000mm high are providedwith bosses in the middle for fitting PMRplates shorter than the nominal height of thecabinet (see note(1) below). In such case,inserts Ref: TEX 8 must be orderedseparately.■ maximum load 150 kg/m2

height (A)

11 × 26 mm.

30 30

1515

(1) Cabinets 1000, 1250, and 1500 mm high allow the following partial boards; 2 PMR (500); 1 off 500 + 1 off 750 or 2 off 750 mm + height (respectively), allfixed to the back of the cabinet.

500 500 1 PMR 55 - 370 376 350 350 2 1,1500 750 1 PMR 57 - 370 626 350 600 2 1,7500 1000 2 - PMR 55 + PMR 55 370 376/376 350 350/350 2 -500 1250 2 - PMR 55 + PMR 57 370 376/626 350 350/600 2 -750 500 1 PMR 75 - 620 376 600 350 2 1,7750 750 1 PMR 77 - 620 626 600 600 2 2,7750 1000 2 - PMR 75 + PMR 75 620 376/376 350 350/350 2 -750 1250 2 - PMR 75 + PMR 77 620 376/626 350 350/600 2 -

1000 500 1 PMR 105 - 870 376 850 350 2 2,11000 750 1 PMR 107 - 870 626 850 600 2 4,11000 1000 2 - PMR 105 + PMR 105 870 376/376 850 350/350 2 -1000 1250 2 - PMR 105 + PMR 107 870 376/626 850 350/600 2 -1250 500 1 PMR 125 - 1120 376 1100 350 2 3,31250 750 1 PMR 127 - 1120 626 1100 600 2 4,81250 1000 2 - PMR 125 + PMR 125 1120 376/376 1100 350/350 2 -1250 1250 2 - PMR 125 + PMR 127 1120 376/626 1100 350/600 2 -1500 500 1 PMR 155 - 1370 376 1350 350 2 4,21500 750 1 PMR 157 - 1370 626 1350 600 2 6,31500 1000 2 - PMR 155 + PMR 155 1370 376/626 1350 350/350 2 -1500 1250 2 - PMR 155 + PMR 157 1370 376/626 1350 350/600 2 -


width (B)

no.doors

reference reference D E F G

thickness(mm)

mounting plate for2-door cabinetsmounting plate weight

(Kg)

27HIMEL

PLA...mounting plate depth adjustablesupports

mounting plate depthadjustable supportsAllow for depth adjustement of PMM, PMBand PMR mountings plates in any cabinet.Set of 4 sliding supports mounted on analuminium guide with 25mm pitch.On models with closed bottom PLAsupports can be fitted directely.On models with open plinth bottom a set ofPTZ plates must be ordered as well as theDPLA supports.

Detail of DPLA mounting plate support on aclosed bottom cabinet.

Inside view of PLA cabinet with mountingplate on depth adjustable supports DPLA.

* On KT glazed door cabinets 5 mm. less.

62*

C

35

C-70

Detail of DPLA supports with EDPLAbrackets allowing fixing of an additionalmounting plate (back to back) on forinstance cabinets with back door.

Open plinth bottom 2 door PLAZ… cabinet with mounting plate on depth adjustable supportsDPLA and adapting plates PTZ.

set of brackets foradditional mounting plateSet of 4 sliding brackets for fixing of anadditional mounting plate.Ref. EDPLA .

DPLA 420

62*

C

35

C-70

Cabinets reference PLA…

Cabinets reference PLAZ…

PTZ 420

PTZ 420/2P

320 1 DPLA320 DPLA320 + PTZ320420 1 DPLA420 DPLA420 + PTZ420320 2 (2×) DPLA320* (2×) DPLA320* + PTZ320/2P420 2 (2×) DPLA420* (2×) DPLA420* + PTZ420/2P

to fit tocabinets

for cabinets

depth (C) no. doors PLA PLA…

* For 2 door cabinets 2 DPLA sets need to be ordered to fit one mounting plate or 2 partial ones.

HIMEL

(2)

(1)

universal chassis system

28

Universal chassis consisting of MOLuprights prepared for fitting partial mountingplates and DIN rails for fixings of variousequipment.Mountings plates can be fixed directly to theback of the enclosure or on depthadjustable supports.2 door cabinets 1000 and 1250 mm wideallow the mounting of 2 × 500 mm chassisor 1 × 500 + 1 × 750 mm wide, respectively.

PLA

(1) DIN double fold CDP rail for direct fixing ofequipment. Detail of TDC sliding nut.

(2) Detail of MOL upright and TDM nut. Thepitching allows adjustment every 2,5 mm.

set of uprights for universalchassisSet of two uprights for direct fixing to theback of the cabinet. The 25mm pitch helpsthe positioning of equipment.

to fit tocabinets reference

height (A)

750 MOL 751000 MOL 1001250 MOL 1251500 MOL 150

To adjust chassis in depth, MOL uprightsmust be mounted on supports DPLA orDPLA + PTZ as below.

320 1 DPLA320 DPLA320 + PTZ320420 1 DPLA420 DPLA420 + PTZ420320 2 (2×) DPLA320 (2×) DPLA320 + PTZ320/2P420 2 (2×) DPLA420 (2×) DPLA420 + PTZ420/2P

to fit tocabinets for cabinets

depth (C) no. doors PLA… PLAZ…

Detail of MOL upright fixed to the back of thecabinet.

Detail of MOL upright fixed to DPLA set ofmounting plate supports.

HIMEL

universal chassis system

to fit to m. platecabinets height referencewidth (B) (H)

500 247 PMP 2550750 247 PMP 2575

1000* 247 PMP 25100500 397 PMP 4050750 397 PMP 4075

1000* 397 PMP 40100

29

PLA

partial mounting plates foruniversal chassisMade of galvanized steel. Fixed to MOLuprights through TDM 8 nuts and TOR16/8Ascrews to be ordered separately.

* 1000 mm wide cabinets allow mounting of2 chassis with PMP...50 mounting plates.

rail for universal chassisMade of galvanized steel. Fixed to MOLuprights through TDM 6 nuts and TOR12/6Ascrews to be ordered separately.

* 1000 mm wide cabinets allow mounting of 2 chassis with C...50 or C...50 rails.

mounting accessories

threadpack.unit.

fixing screws loom

pack.unit.

pack.unit

nuts for MOL uprights fixing screw with washer

to fit toreference reference reference reference

cabinetssymmetrical DIN symmetrical DIN asymmetrical DIN fold rail

width (B)35×7,5 35×15

500 - CSPLA 50 CAPLA 50 -750 - CSPLA 75 CAPLA 75 -

1000 - CSPLA 100 CAPLA 100 -2 m. lengths CO 35 - CA 32 CDP 2002 m. lengths COT 35 - CAT 32 -2 m. lengths - CO 35/15 - -2 m. lengths - CO 35T/15 - -

M 3 - - TDC 34 100 - - - - -M 4 TDE 4 100 TDC 34 100 - - TOR 10/4 A 10 100M 4 - - - - - - TOR 16/4 A 16 100M 5 TDE 5 100 - - - - TOR 12/5 A 12 100M 5 - - TDC 56 100 - - TOR 18/5 A 18 100M 6 TDE 6 100 TDC 56 100 TDM 6 10 TOR 12/6 A 12 100M 6 - - - - - - TOR 18/6 A 18 100M 8 - - - - TDM 8 10 TOR 16/8 A 16 50M 8 - - - - - - TOR 20/8 A 20 104,8 ø drilling TOR 16/5 AT 16 100

pack.unit

lenght(mm)

B-95

H

30 HIMEL

PLADLP distribution chassis system

DLP distribution chassis system for modularequipment for all PLA cabinets.■ distance between fixing rail and inside ofcover plate from 40 to 85 mm (adjustable).■ rigid structure made of galvanized steel■ insulated cover plate and frame inself-extinguishing material to RAL-7032.Quick fixing without screws.■ circuit marking system as standard supply.■ terminal block for earth and neutral wiringref.: RBLZ/21656 as standard supply.■ possibility to mount blank cover plates andmounting plates for fixing of variousequipment.■ on cabinets with closed bottom PLA…chassis are fitted directly. On cabinets withopen plinth bottom PLAZ… adapting platesPTZ must be ordered separately (seebottom of page).

to fit tocabinets

dimensions, models and references

750 500 1 DLP 76 - 4 4 76 - 342 103 150750 500 1 DLP 57 - 4 3 57 1 342 103 150750 750 1 DLP 132 - 4 4 132 - 594 103 150750 750 1 DLP 99 - 4 3 99 1 594 103 150750 1000 2 - DLP76+DLP76 4+4 4+4 152 - - - -

DLP57+DLP57 4+4 3+3 114 1+1 - - -750 1250 2 - DLP76+DLP132 4+4 4+4 208 - - - -

DLP57+DLP99 4+4 3+3 156 1+1 - - -1000 500 1 DLP 114 - 6 6 114 - 342 78 1251000 500 1 DLP 95 - 6 5 95 1 342 78 1251000 750 1 DLP 198 - 6 6 198 - 594 78 1251000 750 1 DLP 165 - 6 5 165 1 594 78 1251000 1000 2 - DLP114+DLP114 6+6 6+6 228 - - - -

DLP95+DLP95 6+6 5+5 190 1+1 - - -1000 1250 2 - DLP114+DLP198 6+6 6+6 312 - - - -

DLP95+DLP165 6+6 5+5 260 1+1 - - -1250 500 1 DLP 133 - 7 7 133 - 342 128 1751250 500 1 DLP 114P - 7 6 114 1 342 128 1751250 750 1 DLP 231 - 7 7 231 - 594 128 1751250 750 1 DLP 198P - 7 6 198 1 594 128 1751250 1000 2 - DLP133+DLP133 7+7 7+7 266 - - - -

DLP114P+DLP114P 7+7 6+6 228 1+1 - - -1250 1250 2 - DLP133+DLP231 7+7 7+7 364 - - - -

DLP114P+DLP198P 7+7 6+6 312 1+1 - - -


no.doors

quantityD F G

rails

no. mod.18 mm.

full chassisreference* no.

rows

no.mounting

plates

single chassisfor 2 doorcabinetsreference

row distribution dimensions

* To fit to cabinets with open bottom PLAZ… adapting plates. Ref: PTZ 320 or PTZ 420 must be ordered separately for cabinets 320 or 420 mm deep. For 2-doorcabinets, order PTZ 320/2P or PTZ 420/2P.

31HIMEL


dimensions (mm)

Marking of circuits as standard supply.Clip-on cover plates.Detail of CSPLA depth adjustable railsupplied as standard.

DLP114DLP76 DLP133

DLP132 DLP198 DLP231

DLP57

DLP99

DLP95 DLP114P

DLP165 DLP198P

(750)

(750)

(750)

(750)

(750)

(750)

(750)

(750)

(750)

(750)

(500)

(500)

(500)

(500)

(500)

(500)

(1000)

(1000)

(1000)

(1000)

(1250)

(1250)

(1250)

(1250)

85

40

85

40

85

40

85

40

85

40

85

40

45C-178 min.

4615

0

D (19/33 modules)

85

40

F

G

16

42*/67*

C

Depth adjustment of mountingplate every 25 mm.

* On KT glazed door cabinets 5 mm less.

85

40

25

32 HIMEL


blank coverRemovable self-extinguishing cover plate forprotection of non-modular equipment.■ grey to RAL-7032.■ easy machining.■ quick fixing.■ nominal 150 mm corresponds to one row.

to fit tonominal width reference

(B) D

500 CTL500/DLP 402750 CTL750/DLP 652

mounting plateMounting plate for fixing of non modularequipment mode of galvanized steel 2 mmthick.■ direct fixing to depth adjustable support,allowing from 40 up to 85 mm to the coverplate.■ nominal 150 mm height corresponds toone row.

to fit tonominal width reference

(B) D

500 PMP500/DLP 361750 PMP750/DLP 611

25 25

146

2113

D

149

D

10x45°

33HIMEL


blanking plateSelf-extinguishing blanking plate toRAL-7032 for full or partial covering of rows.■ easily cut.

terminal blocksWith insulating base for earth and neutralwiring. Fixed to the back of the cabinetthrough metal plate.

* Supplied as standard

L

55

distribution terminalsFor the distribution in the same row of a totalof 12 automatic modules. 1

3 4

21 12 BDS 1/12 12 6 BDS 2/6 23 4 BDS 3/4 34 3 BDS 4/3 4

fig.no.

referenceno. of polesfor terminal

no. ofterminals

no.reference

lengthmodules (L)

6 ATP6/DTM 10824 ATP24/DTM 432

referenceterminal × cross

section mm2

RBLZ/21656 2 × 16 mm2 + 5 × 6 mm2

RBLZ/21686 2 × 16 mm2 + 8 × 6 mm2

RBLZ/216146 2 × 16 mm2 + 14 × 6 mm2

RBLZ/216296 2 × 16 mm2 + 29 × 6 mm2

34 HIMEL

PLA19” rack system

Robust metal 19” rack system, prepared tofit PLA cabinets detailed in next page.

■ fixed and swing racks allowing direct fixingof all kinds of 19” equipment.■ fixing at the top and the sides of cabinetsthrough SPLA uprights (order separately) asfrom 750 mm high cabinets. See chart onnext page.■ both fixed and swing racks can bemounted as partial rack on higher cabinets.See charts on next page.■ maximum load on rack: 3Kg per unit.■ finish: epoxy polyester paint to RAL-7032.■ 120º opening on swing rack, 5 mm doublebar lock.

1

2

3BRF 17 PLA fixed rack mounted on SPLA100 set of uprights.

BRP 16 PLA swing rack mounted onSPLA 100 set of uprights

BRP 7 PLA swing rack used as partial rackin PLA 1074 KT cabinet and mounted onSPLA 100 set of uprights.

2

3

1

35HIMEL

PLA19” rack system

* Can be fitted in higher cabinets as partial racksthrough the corresponding uprights. MPLA uprightsmust in any case be ordered separately.

* Can be fitted in higher cabinets as partial racksthrough the corresponding uprights. MPLA uprightsmust in any case be ordered separately.

19” fixed rackBRF racks prepared to fit all PLA cabinets750 mm wide. As from 750 mm highcabinets, set of SPLA uprights(see below) must be ordered separately.

19” swing rackBRP racks prepared to fit all PLA cabinets750 mm wide and 420 mm deep. As from750 mm high cabinets, set of SPLAuprights (see below) must be orderedseparately.

19” rack accessoriesSee OLN section on general catalogue forrack 19” accessories.

CRT front cover TOR/CRT screws

to fit to cabinets set of twoheight width

no. rack uprights

(A) (B)units reference

500* 750 8 BRF 8PLA * 750* 750 12 BRF 12PLA * SPLA 751000* 750 17 BRF 17PLA * SPLA 1001250* 750 21 BRF 21PLA * SPLA 1251500 750 26 BRF 26PLA SPLA 150

750

31.7

512

.7

44.4

544

.45

420

465

450

8.5 x 8.5

325

44

485

465

450

55

750

31.7

512

.7

44.4

544

.45

77

300

420

8.5 x 8.5

BR2U tray switch socket block ZDBE

to fit to cabinets set of twoheight width

no. rack uprights

(A) (B) units reference

500* 750 7 BRP 7PLA * 750* 750 11 BRP 11PLA * SPLA 751000* 750 16 BRP 16PLA * SPLA 1001250* 750 20 BRP 20PLA * SPLA 1251500* 750 26 BRP 25PLA SPLA 150

36 HIMEL

PLAaccessories

internal doorsMade of aluminium painted to greyRAL 7032.* Double bar lock, various locktransformations compatible with CRNenclosures (see page of general catalogue).On closed bottom models PLA… internaldoors can be fitted directly. On open plinthbottom models PLAZ… adapting platesPTZ, must be ordered separately.

500 500 1 PIPLA 55 - 398 398 1.6 500 750 1 PIPLA 57 - 398 648 2,2500 1000 2 - PIPLA55 + PIPLA55 - - -500 1250 2 - PIPLA55 + PIPLA57 - - -750 500 1 PIPLA 75 - 648 398 2,2750 750 1 PIPLA 77 - 648 648 3,1750 1000 2 - PIPLA75 + PIPLA75 - - -750 1250 2 - PIPLA75 + PIPLA77 - - -

1000 500 1 PIPLA 105 - 898 398 2,81000 750 1 PIPLA 107 - 898 648 4,11000 1000 2 - PIPLA105 + PIPLA105 - - -1000 1250 2 - PIPLA105 + PIPLA107 - - -1250 500 1 PIPLA 125 - 1148 398 3,41250 750 1 PIPLA 127 - 1148 648 51250 1000 2 - PIPLA125 + PIPLA125 - - -1250 1250 2 - PIPLA125 + PIPLA127 - - -1500 500 1 PIPLA 155 - 1398 398 41500 750 1 PIPLA 157 - 1398 648 61500 1000 2 - PIPLA155 + PIPLA155 - - -1500 1250 2 - PIPLA155 + PIPLA157 - - -

to fit to cabinets


no. ofdoors reference*

D E

full internal door weight(Kg)

reference*for 2 door cabinets

single internal doors dimensions

* To fit to cabinets with open bottom PLAZ… adapting plates. Ref: PTZ 320 or PTZ 420 must be ordered separately for cabinets 320 or 420 mm deep. For 2-doorcabinets, order PTZ 320/2P or PTZ 420/2P.

dimensions, models and references

Internal door is depthadjustable every 25 mm.

* On KT glazed doorcabinets 5 mm less.

E

D25

C

30*

C-40

37HIMEL

PLAaccessories

basesPrepared to fit closed bottom models PLA…Made of glass reinforced polyester.■ colour to RAL-7032.■ self-extinguishing, great resistance toimpact and temperature.■ double insulation, excellent outdoorresistance.

plinthsPrepared to fit open bottom models PLA…Made of glass reinforced polyester.■ colour to RAL-7032.■ self-extinguishing, great resistance toimpact and temperature.■ double insulation, excellent outdoorresistance.■ 200 mm front accessible from the inside.■ front fix panel 305 mm high for partialor full root burying.■ fixing profile for incoming cables.■ sides with prepunched PG-36 inlet.

to fit to cabinetswidth depth no.(B) (C) doors

reference

500 320 1 ZNPLA53 750 320 1 ZNPLA731000 320 2 ZNPLA1031250 320 2 ZNPLA123 500 420 1 ZNPLA54 750 420 1 ZNPLA741000 420 2 ZNPLA1041250 420 2 ZNPLA124

to fit to cabinetswidth depth no.(B) (C) doors

reference

500 320 1 ZHPLA53 750 320 1 ZHPLA731000 320 2 ZHPLA1031250 320 2 ZHPLA123 500 420 1 ZHPLA54 750 420 1 ZHPLA741000 420 2 ZHPLA1041250 420 2 ZHPLA124

aaaaaaaaB+20

B

C

300/420

60

65

B+35

200

B

C

305

C-10

395

38 HIMEL

PLAaccessories

canopiesMade of glass reinforced polyester.■ colour to RAL7032.■ self-extinguishing, great resistance toimpact and temperature.■ double insulation, excellent outdoorresistance.■ increase total nominal height by 38 mm.

cable gland platePrepared to fit open plinth bottom PLAZ…Made of glass reinforced polyester.■ color to RAL7032.■ self-extinguishing, great resistance toimpact and temperature.■ easy machining.

to fit to cabinetswidth depth. no.(B) (C) doors

reference

500 320 1 TJPLA53 750 320 1 TJPLA731000 320 2 TJPLA1031250 320 2 TJPLA123 500 420 1 TJPLA54 750 420 1 TJPLA741000 420 2 TJPLA1041250 420 2 TJPLA124

to fit to cabinetswidth depth. no.(B) (C) doors

reference

500 320 1 ECPLAZ53 750 320 1 ECPLAZ731000 320 2 ECPLAZ1031250 320 2 ECPLAZ123 500 420 1 ECPLAZ54 750 420 1 ECPLAZ741000 420 2 ECPLAZ1041250 420 2 ECPLAZ124

1 doorcabinets

2 doorcabinets

A+

38

C= 320/420

B-40

C-7

8

C-2

04

25

11

63

10

100

C-7

8

C-2

04

25

63

10

11

430

21 10 31

B-40

39HIMEL

PLAaccessories

wall fixing bracketsSet of 4 brackets in passivated zinc chromedsteel, FMPLA.■ horizontal fixing (1) to the sides on allcabinets.■ possibility to fix vertically (2): at the top onmodels without canopy at the bottom onclosed bottom models.■ maximum load 150 kg/m2.

lightingLighting specially designed for use inelectrical enclosures with various types offixing and switching.■ electronic low consumption lamp E27,2OW, 220 - 240V, / 50 - 60 Hz.■ output equivalent to a 100 W bulb.■ connection through terminal block on fixedmodels or cord on portable models.■ IP20 rating.■ type II insulation■ according to standards EN55014 y EN50082-1.

description fixing fig. reference

proximity switch operated magnetic, screwsand or DIN 35 rail (1) 1 LAMDP

ON-OFF switch with optional door switch magnetic, screwsand or DIN 35 rail (1) 2 LAMIN

portable lamp, cord connection adhesive orscrews 3 LAMPO

lamp support for LAMDP, LAMIN, LAMPO. adhesive or screws(1) DIN rail not included 4 SOLAM

Compact lamps with current 220V/16A outlet.■ current rating 220V/50Hz.■ fluorescent with built-in switch,consumption 11 W.■ output equivalent to a 75 W bulb.■ connection through terminal block.■ IP 20 rating.

description fixing reference

ON-OFF switch with optional door switch magnetic, screwsand or DIN 35 rail LAM 75

portable lamp, cord connection adhesive orscrews LAC 75

door switchTo fit directly PLA cabinets.■ possible to connect to lighting, thermalcontrol devices, etc.

description reference

10A door switch INL/PLA

(1) DIN rail not supplied as standard

1

2

3

4

(2)

26

26

(1)

B-225

B+52

A+

52

A-3

75

112.5

187.

5

355

66

90

70

67

39610

0

40 HIMEL

PLAaccessories

door retainerPrepared to fit the cabinet, on doors withhinges on the right or left.■ opening degree 105 - 110o.

supporting trayBANPLA tray for support of equipment orsegregation, prepared to fit horizontally onedoor cabinets directly onto the bottom or atdifferent levels through 2 sets of SPLAuprights (4 in total) ordered separately.

* For placing the tray at intermediate levels

1230

020

020

020

020

0

11x13

watertight gasketFitted to IP-44 cabinet the front and back forIP-54.■ colour: black. Ref.: JPLA■ length: 5 m.

C-8

0

25

B-4227

12

18

to fitto cabinets

reference

PLA… RET/PLA PLAZ… RET/PLAZ

to fit tocabinets reference

height width depth tray uprights*(A) (B) (C)

500 500 320 BANPLA53 -500 750 320 BANPLA73 -750 500 320 BANPLA53 2 × SPLA 75750 750 320 BANPLA73 2 × SPLA 75

1000 500 320 BANPLA53 2 × SPLA 1001000 750 320 BANPLA73 2 × SPLA 1001250 500 320 BANPLA53 2 × SPLA 1251250 750 320 BANPLA73 2 × SPLA 1251500 500 320 BANPLA53 2 × SPLA 1501500 750 320 BANPLA73 2 × SPLA 150

500 500 420 BANPLA54 -500 750 420 BANPLA74 -750 500 420 BANPLA54 2 × SPLA 75750 750 420 BANPLA74 2 × SPLA 75

1000 500 420 BANPLA54 2 × SPLA 1001000 750 420 BANPLA74 2 × SPLA 1001250 500 420 BANPLA54 2 × SPLA 1251250 750 420 BANPLA74 2 × SPLA 1251500 500 420 BANPLA54 2 × SPLA 1501500 750 420 BANPLA74 2 × SPLA 150

41HIMEL

PLAaccessories

ground fixing frameSet of 4 bolts for direct ground fixing onopen plinth bottom models PLAZ…Fixing of closed bottom models PLA… isdone through standard hardware available inthe market.

joining of cabinetsCabinet assemblies are available on requestand subject to a lead time.Side joining is done through a gasketedcoupling frame which ensures the rigidityand IP rating of the assembly.Vertical joining can be done only with bottomcabinets without canopy and top cabinetswith closed bottom (not open plinth type).

lifting of cabinetsA set of straps is available for the most usuallifting requirements.■ Below is a chart with maximum weight foreach cabinet or assembly. Note ELS 1520can only be used on the shaded area.

1500 113 169 225 281 338 394 4501200 94 141 188 234 281 328 3751000 75 113 150 188 225 263 300750 56 84 113 141 169 197 225500 38 56 75 94 113 131 150

500 750 1000 1250 1500 1750 2000

(A) and (B) are nominal height and widthrespectively of cabinets or assemblies.

to fit to cabinetswidth depth no. of(B) (C) doors

reference

500 320 1 MF PLAZ 53 750 320 1 MF PLAZ 731000 320 2 MF PLAZ 1031250 320 2 MF PLAZ 123 500 420 1 MF PLAZ 54 750 420 1 MF PLAZ 741000 420 2 MF PLAZ 1041250 420 2 MF PLAZ 124

B-60

C-160

width (B)

height (A)

42 HIMEL

PLAaccessories

descriptioninsert key

referencetype type

6,5 mmtriangular lock TT6/CRNwith LT6,5 key.

7 mmtriangular lock TT7/CRNwith LT8 key.

8 mmtriangular lock TT8/CRNwith LT8 key.

6 mmsquare lock TC6/CRNwith LC7 key.



double barlock withLDB5 key TDB/CRNsupplied asstandard.

padlock BC/PLA

transformations of standard lock to other versions

* To obtain the complete lock, T.../OLN inserts must be ordered separately as well as EBM/PLA, see nextpage.

5 mm double bar lock with LDB5 key.See next page for other locking systems.

standard lock for open topcabinets

Set of key lock transformation (withouthandle):Ref. EB/PLA

transformation to handle lock

descriptionlock

referencetype

set of key lockwith handle* EBM/PLA*

43HIMEL

PLAaccessories

descriptioninsert key

referencetype type

7 mmtriangular insert TT7/OLNLT8 key.

8 mmtriangular insert TT8/OLNwith LT8 key.

6 mmsquare insert TC6/OLNwith LC7 key.



405 keytype insert. TL/OLN

JIS keytype insert. TJIS/OLN

half-cylinderkey insert. TLR/OLN

FAC keytype insert. TFAC/OLN

push buttoninsert. TS/PLA

5 mm doublebag insert TDB/OLN(standard supply).

padlock BCM/PLA

Double bar handle lock supplied asstandard. Various inserts available.

standard lock for cabinetswith canopy

Set of handle lockRef. EBM/PLA

transformations of standard lock to other versions

* To obtain the complete lock, T.../CRN inserts must be ordered separately as well as EB/PLA. See previouspage.

transformation to lock without handle

descriptionlock

referencetype

set of lockwithout handle* EB/PLA*

HISPANO MECANO ELECTRICA, S.A.Aragón, 22408011 BARCELONA (ESPAÑA)Tel. 3 484 35 00Fax 3 484 34 89

900040 G99

We reserve the right to alter any detail of design shown inthis catalogue without prior notice.

polyester cabinets plahimel 9 general product chart pla no. of doors totally closed open plinth...

Documents