COLORSYSTEMPU - pigmented woodcoatings

www.polistuc.it

• Complete LINE of polyurethane high performances products • Professional system for high quality and reproducible pigmented

mat and high gloss versions: OP series, LP series

• High solid content compared to usual pigmented products exisitng in the market

• Different levels of yellowing resistance

• These products meet the european requirements, expecially regarding polluting, toxic and carcinogenic substances

PIGMENTED TOPCOATS - MAT OP seriesWhite base OP/Transparent binder OT/Fifteen PCP pigmented pastes

FEATURES: it's a pigmented mat topcoat series with excellent drying time,filling power, soft feel and surface hardness. Excellent the yellowing resistance.The white base OP and the referred transparent binder can betinted with PU pigmented PCP.. pastes series, in order to achieve a hugerange of different colours.APPLICATION: spray (airmix, airless, traditional spray gun) and curtaincoater.

PIGMENTED TOPCOATS - Glossy LP seriesWhite base LP/Transparent binder LT/Fifteen PCP pigmented pastes

FEATURES: it's a pigmented glossy topcoat series with excellent characteri-stics of drying time, filling power, soft feel and surface hardness.Excellent the yellowing resistance, too. The white base LP and the referredtransparent binder can be tinted with PU pigmented PCP.. pastes series, inorder to achieve a huge range of different colours.APPLICATION: spraygun (airmix, airless, traditional spray gun) and curtain coater.

WHITE SELF SEALER - FPAB010 seriesFEATURES: it's a pigmented acrylic self-sealer with perfect wettability, dryingtime, pore definition, levelling, and good sandability.Very high resistance to yellowing. Expecially suitable for decapè cycles ondoors of oak and ash. It can be mixed with little quantites of PU pigmentedPCP10 pastes, in order to reach pastel colours uniformity.APPLICATION: spraygun (airmix, airless, traditional spray gun) and curtaincoater.

WHITE PRIMER - FPB series

FEATURES: this is a pigmented thixotropic polyurethane primer. Good covering power, vertical application, sanding and colour uniformity.APPLICATION: spraygun (airmix, airless, traditional spray gun).

leaflet POLISTUC Ing2014 11-11-2014 16:37 Pagina 1

TINTOSYSTEMWater and solvent borne stains

www.polistuc.it

CW100 WATER BASED transparent stains

CW100 stains series is characterised by high quality in terms of shade andclearness. The application is with common equipments as manual sprayguns,wiping, roller, etc..Type of thinner and binder to be used are fundamental to reach the desideredresult (according to the application equipment, the type of wood and the cycletiming).The light resistance is quite good, specifically recommended for indoor.The light resistance decreases with light shaded colours.

CW9000 WATER BASED extra-concentrated stains

This series is characterised by high quality in terms of clearness anduniformity, especially suitable for roller application in bright shades.The series is suitable for indoor application; the resistance is lower with lightshades and particular applications (like re-application of the stain over thesealer).

CCU SOLVENT BASED transparent stains

CCU stains provide high quality results in terms of shade and clearness.The application is with common equipments as manual sprayguns, wiping,roller, etc.Type of thinner and binder to be used are fundamental to reach the desideredresult (according to the application equipment, the type of wood and the cycletiming).Suitable for indoor furniture, light resistance is optimal.The light resistance decreases with light colours (expecially the re-applica-tion over the sealer).

CNP 1900 semi-transparent stains

With a semi-transparent effect, this series has more hiding power thanCCU200 stains. It can be mixed with CCU200 to reach colour uniformity.Used alone on all wood surfaces, the result is a special highlighting effect.Maximum resistance for indoor use; it can be used also for outdoor.The light resistance is excellent.It is resistant to peroxides and could increase the light resistance of CCU200series if mixed with it.

leaflet POLISTUC Ing2014 11-11-2014 16:37 Pagina 2

www.polistuc.it

• High performances paints, suitable for furniture in general and parquet flooring

• Absence of organic volatile compounds (VOC)

• Careful choice of every operative detail

CLEAR SEALERS FEATURES: acrylic UV sealers with high filling power, good reactivity,sandability and transparency.APPLICATION: rurtain coater.

CLEAR SEALERS FEATURES: this is a series of acrylic photoinitiated UV sealers with very goodtransparency, reactivity, adhesion, sandability and wettability.APPLICATION: spraygun (airmix, airless, traditional spray gun).

CLEAR TOPCOATSFEATURES: UV mat topcoats series with good filling power, reactivity andhardness. Very good resistance to scratches.APPLICATION: curtain coater.

CLEAR TOPCOATSFEATURES: acrylic photoinitiated UV topcoats series with very good reactivity, soft feel, and uniformity.APPLICATION: spray (airmix, airless, traditional spray gun)

CLEAR SEALERS FEATURES: acrylic photoinitiated UV fillers and sealers with very good transparency, reactivity, adhesion, and sandability.It can be used on different wood essences.APPLICATION: roller coater.

CLEAR TOPCOATS - (High performances)FEATURES: acrylic photoinitiated UV topcoats with very good reactivity, goodsoft feel, and uniformity.Anti-scratch resistance, suitable for parquets.APPLICATION: roller coater.

PRODUCTS FOR ROLLER COATERS PRODUCTS FOR AUTOMATICsprayers and curtain coaters

U V I G L O S S

leaflet POLISTUC Ing2014 11-11-2014 16:37 Pagina 3

PU& ACRYLICW O O D C O A T I N G S

www.polistuc.it

• Complete RANGE of polyurethane high performances products • Professional system for high quality mat and HIGH gloss versions• High solid content compared to common products present

in the market• Different levels of yellowing resistance• These products meet the european requirements, expecially

regarding polluting, toxic and carcinogenic substances• Tailor-made products for every customer

CLEAR SEALERS - FP series (standard)

FEATURES: universal sealers serie, suitable for interior doors and furniturein general. Very good sandability and high transparency.APPLICATION: spraygun (airmix, airless, traditional spray gun).

CLEAR TOPCOATS - LT008

FEATURES: high gloss topcoat with excellent spreading, filling power and brightness. Remarkable yellowing resistance and hardness. It can be buffedeasily.APPLICATION: spray (airmix, airless, traditional spraygun)and curtain coater.

CLEAR SEALERS - FP series (high perfomances)

FEATURES: polyurethane sealers series suitable for indoor frames and furniture.To be applied both on flat and vertical surfaces (chairs and turned objects).Good sandability, excellent levelling, fast drying and perfect removal resistance.APPLICATION: spraygun (airmix, airless, traditional spray gun) and curtaincoater.

CLEAR TOPCOATS - OTA series

FEATURES: acrylic mat topcoats series with very good yellowing resistance, good surface hardness and pore definition.APPLICATION: spray (airmix, airless, traditional spraygun) and curtaincoater.

leaflet POLISTUC Ing2014 11-11-2014 16:37 Pagina 4

LOW VOCw o o d c o a t i n g s

www.polistuc.it

• Suitable for spray cycles on veneers or MDF, wet or mat effects

• Less than 40 g/sm of total polluting substances released in atmosphere

• Extremely limited number of coats, compared to regularly PU used sealers

• Final effect similar to regular PU/polyesther cycles

WHITE PRIMER- FPE125FEATURES: white PE sealer without styrene and any aromatic solvent, there-fore with LOW emissions of organic substances in working environments andfrom painted wood. By using this product the filling effect will be better thanthe effect reacheble using the normal PE products.Very good filling power and sandability (both manual and authomatic); Verygood wettability. Suitable for the MDF door application and surfaces in general.APPLICATION: spraygun (airmix, airless, traditional spray gun).

WHITE MAT TOPCOATS - WIOP 610FEATURES: water borne, very good soft feel and smoothness, excellent yellowing and scratching resistances, high coverage.APPLICATION: spraygun (airmix, airless, traditional spray gun).

WHITE GLOSSY TOPCOATS - LW100FEATURES: it is a two-component waterborne glossy topcoat for interiors.Very good resistance to chemical agents, to yellowing, hardness,soft feel and superficial smoothness. Easy to be buffed.APPLICATION: spraygun (airmix, airless, traditional spray gun).

CLEAR SEALER - FPE225FEATURES: transparent polyester sealer with high solid content and totalabsence of styrene; Therefore there is a remarkable reduction of pollutingsubstances released in the atmosphere. Manual and automathic sanding aregood.APPLICATION: spray (airmix, airless, traditional spray gun).

CLEAR TOPCOATS - WOS 0021FEATURES: water borne self-sealer, sandable, monocomponent, good chemi-cal resistance, fast drying, good hardness, high transparency.APPLICATION: spraygun (airmix, airless, traditional spray gun).

CLEAR TOPCOATS - WOT 200 (Specific for parquet)FEATURES: waterborne self-sealer for interior, especially suitable for thepainting (or repainting) of parquets already laid. It is characterised byfast drying, good wettability and great versatility.Furthermore the product is very resistant to abrasion.APPLICATION: roller coater, brush and curtain coater.

CLEAR COATING CYCLES PIGMENTED COATING CYCLES

leaflet POLISTUC Ing2014 11-11-2014 16:37 Pagina 5

WATERBORNEC Y C L E S F O R I N D O O R

www.polistuc.it

white selear wfs5501FEATURES: waterbased, mono or bi component, excellent sanding, high coverage, good adhesion on melamine papers.APPLICATION: spray (airmix, airless, traditional spraygun).

TOPCOAT - WIOP610 series (alternatively WOS0021G series self sealer mentioned below)

FEATURES: water based, good soft feel and smoothness, excellent yellowingand scratching resistances, high coverage, (it is possible to tint it with WPP10series pastes).APPLICATION: spray (airmix, airless, traditional spray gun).

TOPCOAT - WPOP10G seriesFEATURES: water based, excellent soft feel and smoothness, excellent yellowing and good scratching resistances (it is possible to tint it with WPP10series pastes).APPLICATION: spray (airmix, airless, traditional spray gun).

PIGMENTED MAT UV TOPCOATS FEATURES: it is environmental friendly. The substrates have to be preparedwith a white sealer. It is characterised by good uniformity of gloss level andlevelling. The drying step can be performed into vertical or horizontal ovenswith forced air or IR lamps.APPLICATION: spray (airmix, airless, traditional spray gun).

WHITE GLOSSY TOPCOATS - LW100 seriesFEATURES: it is an UV waterbased pigmented topcoats series environmentalfriendly. The substrates have to be prepared with a white sealer.It is characterised by good uniformity of gloss level and levelling.The drying step can be performed into vertical or horizontal ovens with forced air or IR lamps.APPLICATION: spray (airmix, airless, traditional spray gun).

CW100 series transparent stainsFEATURES: water based, very high light resistance.APPLICATION: spray (the user has to be properly protected).

CLEAR SEALERS - WFS0024(alternatively WOS0021G series self sealer mentioned below)FEATURES: water based, sandable, mono or bicomponent, fast drying time,excellent lifting resistance.APPLICATION: spray (airmix, airless, traditional spray gun).

CLEAR TOPCOATS - WOS0021G seriesFEATURES: water based self sealer, sandable, monocomponent, good chemical resistance, fast drying time, good hardness, high transparency.APPLICATION: spray (airmix, airless, traditional spray gun).

CLEAR TOPCOATS - WOT200 (Specific for parquet)FEATURES: WOT200 is a waterbased self sealer for interior, specifically stu-died for the painting (or repainting) of parquets already laid.It is characterized by fast drying, good wetting of the substrate and above all,the great versatility. In addition, the product has the characteristic ofresistance to abrasion, required for this type of application.APPLICATION: roller coater, brush and curtain coater.

C L E A R C Y C L E S PIGMENTED CYCLES

leaflet POLISTUC Ing2014 11-11-2014 16:37 Pagina 6

WATERBORNEProducts for outdoor application

www.polistuc.it

Impregnating Agents WIE8000 for softwood or WIE4000 for hardwood

FEATURES: Water based, colourless, it protects wood against mildew.APPLICATION: Dipping, brush, flow-coating, spray (the user has to be properly protected).

WHITE SEALERS - WFE114FEATURES: Water borne, sandable, for hardwood and softwood, good insula-ting properties.APPLICATION: Spraygun (airmix, airless, traditional spray gun).

TOPCOAT - WOE310FEATURES: It’s charatterised by good verticality, fast drying time, good blocking resistance, excellent weather and yellowing resistances, excellentwettability.APPLICATION: Spray (airmix, airless, traditional spray gun) and brush.

CATAS Quality Award

IMPREGNATING Agents WIE00 seriesFEATURES: Water borne, tinted, high uv resistance, it protects wood againstmildew.APPLICATION: Dipping, brush, flow-coating, spray.

CLEAR SEALERS - WFE0015FEATURES: mono component sealer for exterior, with good elasticity, goodclearness and verticality. It can be vertically applied by spray till a thicknessof 150 microns of wet film.APPLICATION: Spray (airmix, airless, traditional spray gun).

TOPCOAT WOE1600GFEATURES: Water borne, translucent, it contains UV absorbers and additivesagainst free radicals, high blocking resistance, excellent weather resistance,excellent transparency also during the application, excellent wettability, easyrecovery, fast development of water resistance.APPLICATION: Spray (airmix, airless, traditional spray gun).

C L E A R C Y C L E S PIGMENTED CYCLES

leaflet POLISTUC Ing2014 11-11-2014 16:37 Pagina 7