pole line hardware joslyn

Pole Line Hardware JOSLYNManufacturing Co.

©2004 Joslyn Manufacturing Co. • 9200 W. Fullerton Avenue • Franklin Park, IL 60131 • www.joslynmfg.comPhone: 800-4-JOSLYN (800-456-7596) or 773-625-1500 • Fax 800-443-7380 or 773-625-0090PH-2

IntroductionJoslyn Pole Line Hardware has been manufactured for over 100 years (since 1902) for the Power Utility andTelecommunications industries. Our reputation of quality,reliability and product durability has been earned andsustained through our rigid specifications, manufacturingprocesses, raw material requirements and quality assurancestandards. Joslyn’s integrity has withstood the test of time.

Product OfferingThis catalog section includes our standard line of Pole LineHardware – those items commonly used by electric andtelephone utilities and CATV systems. Large hardwareinventories are maintained by our nationwide network ofexperienced electrical and telecommunications distributorsas well as at our hardware manufacturing facility in Chicago,Illinois.

Numerous other hardware products, not shown in thiscatalog, are produced for customers on special orders inquantities that justify production. Contact us for yourrequirements of non-standard hardware items. Constantlychanging construction needs and practices require newproducts. Our experienced staff can assist in the design,development, testing and manufacture of special productswhere standard items are not suitable and an alternativedesign is required.

SpecificationsJoslyn Pole Line Hardware is designed and manufacturedprimarily from specially selected steel, or ductile/malleableiron castings with chemical and physical properties mostsuitable for product performance and applications in whichthey are used. In addition, Joslyn also manufacturesproducts from various types of materials including wood,aluminum and plastic alloys – such as our nylon alloy (JEMJoslyn Engineered Material) insulator threads on forged steelcrossarm pins. Joslyn products are engineered for strength,reliability, durability and ease of installation. Our modern,efficient production equipment and rigid quality controlstandards assure that Joslyn hardware is consistently of thehighest obtainable quality. Joslyn Pole Line Hardwareconforms to the specifications of one or more of thefollowing organizations, where applicable:

ANSI — American National Standards InstituteASTM — American Society for Testing and MaterialsCA — Bell Operating CompaniesCSA — Candadian Standards AssociationIEEE — Institute of Electrical and Electronic Engineers, Inc.NEMA — National Electrical Manufacturers AssociationRUS — Rural Utilities Service

JOSLYNManufacturing Co. Pole Line Hardware

AnchorsPower Hub, CAM ACTION®The patented Joslyn CAM ACTION® power hub screw anchorsystem offers a versatile and cost effective power drivenscrew anchor for application through Class 2 soils and to36,000 pound holding strength.

A complete power hub anchor assembly consists of a helix-hub assembly, anchor rod and eyenut. The helix-hubassemblies are offered with single and double CAM ACTION®helix configurations. Available with 1-3/8” square hub for6,000 ft.-lbs. torque capacity and 1-1/2” square hub for6,000 and 8,000 ft.-lbs. torque capacity.

The anchor rods are available in 5/8, 3/4 and 1-inchdiameters for 16,000, 23,000 and 36,000 pound tensilestrengths, respectively. Anchor rod lengths are either 3-1/2or 7 feet. Anchor rod extension assemblies (anchor rod withcoupling) can be used when greater installed depths arerequired.

Eyenuts are available in Thimbleye®, Twineye® and Tripleye®configurations for one, two or three guys, respectively.

These anchors can be installed to a depth of 14 feet witheither dangle torque motor type line trucks or rack typedigger trucks utilizing the Joslyn J-CLAW™ installing toolsystem. Joslyn offers additional information for the selectionof the appropriate anchor components and installationprocedures.

TESTING

Utilizing electronic torque measuring and recordinginstruments, installing torque can be continuously recordedwith anchor depth. These torque values validate each anchorinstallation and enable Joslyn to custom design andrecommend the proper anchor configuration for eachcustomer requirement. Torque values can also be obtained by using a calibrated hydraulic pressure gauge on the linetruck. Applying these pressure gauge readings to Joslyn’sline application data, our customers can measure andevaluate their own installation performance.

SPECIAL APPLICATIONS

This catalog presents some of the popular anchors. ContactJoslyn for special applications.

®CAM ACTION is a registered trademark of Joslyn.® Thimbleye, Twineye and Tripleye are registered trademarksof A. B. Chance Company.

©2004 Joslyn Manufacturing Co. • 9200 W. Fullerton Avenue • Franklin Park, IL 60131 • www.joslynmfg.comPhone: 800-4-JOSLYN (800-456-7596) or 773-625-1500 • Fax 800-443-7380 or 773-625-0090 PH-3

POWER HUB ANCHOR

SOIL CLASSIFICATION DATATypical Blow

Common Soil-Type Geological Soil Count “N” per Class Description Classification ASTM-D15860 Sound hard rock, unweathered Granite, Basalt, Massive Limestone N.A. ROD = 50-1/21 Very dense and/or cemented sands; coarse Caliche, (Nitrate-bearing gravel/rock)

gravel and cobbles 60-100+2 Dense fine sand; very hard silts and clays (may be Basal till; boulder clay; caliche; weathered laminated

preloaded) rock 45-603 Dense clays, sands and gravel; hard silts and clays Glacial till; weathered shales, schist, gneiss and siltstone 35-504 Medium dense sandy gravel; very stiff to hard silts Glacial till; hardpan; marls

and clays 24-405 Medium dense coarse sand and sandy gravels; stiff Saprolites, residual soils

to very stiff silts and clays 14-256 Loose to medium dense fine to coarse sand; Dense hydraulic fill; compacted fill; residual soils

firm to stiff clays and silts 7-14**7 Loose fine sand; Alluvium; loess; soft-firm clays; Flood plain soils; lake clays; adobe; gumbo, fill

varied clays; fill 4-8**8 Peat, organic silts; inundated silts, fly ash Miscellaneous fill, swamp marsh 0-5Class 1 soils are difficult to probe consistently and the ASTM blow count may be of questionable value.

** It is advisable to install anchors deep enough, by the use of extensions, to penetrate a Class 5 or 6, underlying the Class 7 or 8 soils.




AnchorsPower Hub, CAM ACTION® (continued)

HELIX-HUB ASSEMBLIES – 1-3/8” SQUARE HUB


PH6 JOSLYN COATED HELIX-HUB ASSEMBLIES(1-3/8” SQUARE HUB; 6,000 FT.-LBS. TORQUE)

Approximate WeightJoslyn Catalog No. Description (Lbs. Each)J25996CAB.1 8” Helix, for 5/8” rod 10J25996CAB.2 8” Helix, for 3/4 or 1” rod 10J25996CAB.3 10” Helix, for 5/8” rod 13J25996CAB.4 10” Helix, for 3/4 or 1” rod 13J25996CAB.5 12” Helix, for 5/8” rod 16J25996CAB.6 12” Helix, for 3/4 or 1” rod 16J25996CAB.7 14” Helix, for 3/4 or 1” rod 21J25996CAB.8 15” Helix, for 3/4 or 1” rod 28

J25997CAB.1 (Twin) 8” Helices, for 3/4 or 1” rod, 28” length 29J25997CAB.2 (Twin) 10” Helices, for 3/4 or 1” rod, 28” length 35


Approximate WeightJoslyn Catalog No. Description (Lbs. Each)J23738CAB.3 8” Helix, for 5/8” rod 11J23738CAB.1 8” Helix, for 3/4 or 1” rod 11J23738CAB.5 10” Helix, for 5/8” rod 14J23738CAB.2 10” Helix, for 3/4 or 1” rod 14J23738CAB.4 12” Helix, for 3/4 or 1” rod 17J23738CAB.6 14” Helix, for 3/4 or 1” rod 22J23738CAB.7 15” Helix, for 3/4 or 1” rod 26

J23739CAB.1 (Twin) 8” Helices, for 3/4 or 1” rod, 36” length 32J23739CAB.2 (Twin) 10” Helices, for 3/4 or 1” rod, 36” length 38


Approximate WeightJoslyn Catalog No. Description (Lbs. Each)J23742CAB.1 8” Helix, for 3/4 or 1” rod 11J23742CAB.2 10” Helix, for 3/4 or 1” rod 15J23742CAB.3 12” Helix, for 3/4 or 1” rod 18

J24293CAB.3 (Twin) 4” Helices, for 3/4 or 1” rod, 17-1/2” length 8J23743CAB.1 (Twin) 8” Helices, for 3/4 or 1” rod, 36” length 32J23743CAB.2 (Twin) 10” Helices, for 3/4 or 1” rod, 36” length 38

TWIN HELIXSTRAIGHT HUB

STRAIGHT HELIXSTRAIGHT HUB

AnchorsPower Hub, CAM ACTION® (continued)

PH STYLE ANCHOR RODS WITH EYENUTS (ASSEMBLED)Hot Dip GalvanizedThese anchor rods with eyenut assemblies are used with properly tapped helix-hubassemblies or with the same diameter PH rod extension assemblies.

Approximate WeightCatalog No. Description (Lbs. Each)5/8” x 3-1/2’ ANCHOR RODS 16,000 LBS. MINIMUM TENSILE STRENGTHJ12249R.1 5/8” x 3-1/2’ Rod & Thimbleye® Nut 4.6J12249R.2 5/8” x 3-1/2’ Rod & Twineye® Nut 5.43/4” x 3-1/2’ ANCHOR RODS 23,000 LBS. MINIMUM TENSILE STRENGTHJ12250R.1 3/4” x 3-1/2’ Rod & Thimbleye® Nut 6.9J12250R.2 3/4” x 3-1/2’ Rod & Twineye® Nut 6.8J12250R.3 3/4” x 3-1/2’ Rod & Tripleye® Nut 7.21” x 3-1/2’ ANCHOR RODS 36,000 LBS. MINIMUM TENSILE STRENGTHJ12251R.1 1” x 3-1/2’ Rod & Thimbleye® Nut 11.5J12251R.2 1” x 3-1/2’ Rod & Twineye® Nut 11.4J12251R.3 1” x 3-1/2’ Rod & Tripleye® Nut 11.85/8” x 7’ ANCHOR RODS 16,000 LBS. MINIMUM TENSILE STRENGTHJ12253R.1 5/8” x 7’ Rod & Thimbleye® Nut 8.2J12253R.2 5/8” x 7’ Rod & Twineye® Nut 9.1J12253R.3 5/8” x 7’ Rod & Tripleye® Nut 9.43/4” x 7’ ANCHOR RODS 23,000 LBS. MINIMUM TENSILE STRENGTHJ12254R.1 3/4” x 7’ Rod & Thimbleye® Nut 11.2J12254R.2 3/4” x 7’ Rod & Twineye® Nut 11.1J12254R.3 3/4” x 7’ Rod & Tripleye® Nut 11.51” x 7’ ANCHOR RODS 36,000 LBS. MINIMUM TENSILE STRENGTHJ12255R.1 1” x 7’ Rod & Thimbleye® Nut 17.4J12255R.2 1” x 7’ Rod & Twineye® Nut 17.4J12255R.3 1” x 7’ Rod & Tripleye® Nut 17.7



PH STYLE ANCHOR RODSHot Dip GalvanizedThese anchor rods are used with all properly tapped helix-hub assemblies and PH couplings and PH eyenuts.

Tensile Strength Approximate WeightCatalog No. Description (Lbs.) (Lbs. Each)3-1/2 FT. LENGTHJ12249R 5/8” Nominal Diameter 16,000 3.6J12250R 3/4” Nominal Diameter 23,000 5.0J12251R 1” Nominal Diameter 36,000 9.67 FT. LENGTHJ12253R 5/8” Nominal Diameter 16,000 7.3J12254R 3/4” Nominal Diameter 23,000 9.3J12255R 1” Nominal Diameter 36,000 15.5

PH ANCHOR RODWITH TRIPLEYE® NUT

PH ANCHOR ROD


AnchorsEyenuts for PH RodsPH STYLE EYENUTSHot Dip GalvanizedThese eyenuts are used with all properly threaded PH style anchor rods.

Approximate WeightCatalog No. Description (Lbs. Each)FOR 5/8” ANCHOR RODSJ12587 Thimbleye® 1.0J12589 Twineye® 1.8J12593 Tripleye® 2.2FOR 3/4” & 1” ANCHOR RODSJ16512 Thimbleye® 1.9J16562 Twineye® 1.8J12585 Tripleye® 2.2


AnchorsRods, Extension for PH AnchorsPH STYLE EXTENSION ASSEMBLIES (ASSEMBLED ROD AND COUPLING)Hot Dip GalvanizedThese extension assemblies are used with all properly tapped helix-hub assembliesand PH eyenuts or same sized PH anchor rod.

Tensile Strength Approximate WeightCatalog No. Description (Lbs.) (Lbs. Each)3-1/2 FT. LENGTHJ12249 5/8” Nominal Diameter 16,000 4.1J12250 3/4” Nominal Diameter 23,000 5.5J12251 1” Nominal Diameter 36,000 10.17 FT. LENGTHJ12253 5/8” Nominal Diameter 16,000 7.7J12254 3/4” Nominal Diameter 23,000 9.8J12255 1” Nominal Diameter 36,000 16.0

AnchorsCouplings for PH Extension RodsPH STYLE COUPLINGSHot Dip GalvanizedThese couplings are used with all PH style anchor rods.

Approximate WeightCatalog No. Description (Lbs. Each)J23161.1 For 5/8” Diameter PH Anchor Rod .5J23161.2 For 3/4” & 1” Diameter PH Anchor Rods .5

PH TRIPLEYE®PH TWINEYE®

PH THIMBLEYE®

PH EXTENSIONASSEMBLY

PH COUPLING

AnchorsClamps, Guy Bonding for PH RodsJoslyn bonding clamps are designed for use on PH screw anchors. Castings are highstrength aluminum alloy with hot dip galvanized steel hardware.

Approximate WeightCatalog No. Rod Type Rod Size (Lbs. Each)J26714 Thimbleye® 1/2” & 5/8” 0.14J26715 Thimbleye® 3/4” thru 1” 0.23J26716 Twineye® 5/8”, 3/4” & 1” 0.32



GUY BONDING CLAMP

AnchorsClamps, Guy Bonding for Forged-Eye Anchor RodsJoslyn guy bonding clamps are used with forged-eye anchor rods to maintain a firmcontact between the guy strand and the anchor rod when the down guy also servesas a ground.

For Rod ApproximateType & Diameter Size Strand Shipping Weight

Catalog No. (Inches) (Inches) (Lbs. Per 100 Pcs.)J3230 5/8” Thimbleye® 3/16 to 3/8 17.3(Galvanized Body, 3/4” Thimbleye® 3/8 to 1/2Bolt & Nut) 1” Thimbleye® 3/8 to 1/2J3231 5/8” Twineye® 1/4 to 1/2 13.7(Aluminum Body— 3/4” Twineye® 1/4 to 1/2Galvanized Bolt & Nut) 1” Twineye® 3/8 to 1/2J3233 3/4” to 1-1/4” Tripleye® 1/4 to 1/2 25.0(Aluminum Body—Galvanized Bolt & Nut)

J3230

J3231

AnchorsPower Shaft, Multi-HelixPS6.5 SCREW ANCHORSJoslyn PS6.5 CAM ACTION® screw anchors are 1-1/2-inch square shaft, rated at6,500 ft.-lbs. maximum torque for installation through Class 3 soils. These anchorsare installed by applying the installation forces directly to each extension.Installation depths in excess of 100 ft. can be achieved when necessary.

HELIX-SHAFT ASSEMBLIES(1-1/2” SQUARE SHAFT, 6,500 FT.-LBS. TORQUE)Hot Dip Galvanized

Approximate WeightCatalog No. Description (Lbs. Each)J26936ACA 8 & 10” Helices, 24” Spacing, 3’ Long 35J23380ACA 8 & 10” Helices, 48” Spacing, 5’ Long 50J26937ACA 10 & 12” Helices, 30” Spacing, 3-1/2’ Long 43J23382ACA 10 & 12” Helices, 48” Spacing, 5’ Long 56J26938ACA 8, 10 & 12” Helices, 48” Spacing, 5-1/2’ Long 65J23381ACA 8, 10, & 12” Helices, 36” Spacing, 7’ Long 77J23383ACA 10, 12 & 14” Helices, 36” Spacing, 7’ Long 87J29726ACA 10, 12, 14 & 14” Helices, 36” Spacing, 10’ Long 125

HELIX-SHAFTASSEMBLY


AnchorsExtension with Helix for Power Shaft AnchorsHELIX-EXTENSION ASSEMBLIES(1-1/2” SQUARE SHAFT, 6,500 FT.-LBS. TORQUE)Hot Dip GalvanizedAn extension(s) with helix may be added to a double or triple helix-shaftassembly(ies) when installing equipment has insufficient ground to torque motoroutput shaft clearance for a one-piece three or four helix anchor.

Approximate WeightCatalog No. Description (Lbs. Each)J24993CA.1 12” Helix, 4’ Length 49J24993CA.2 14” Helix, 4’ Length 51


HELIX-EXTENSIONASSEMBLY

AnchorsExtension for Power Shaft AnchorsEXTENSION ASSEMBLIES(1-1/2” SQUARE SHAFT, 6,500 FT.-LBS. TORQUE)Hot Dip Galvanized

Approximate WeightCatalog No. Description (Lbs. Each)J23378.3 1-1/2” Square x 3-1/2’ 36J23378.5 1-1/2” Square x 5’ 42J23378.7 1-1/2” Square x 7’ 58J23378.10 1-1/2” Square x 10’ 81

EXTENSIONASSEMBLY

AnchorsEyebolt Adapter for Power Shaft AnchorsEYEBOLT ASSEMBLIESHot Dip GalvanizedThese eyebolt assemblies can be used with PS6.5 and PS8 screw anchors.

Approximate WeightCatalog No. Description (Lbs. Each)J23365 Twineye® 9.5J23371 Tripleye® 9.5

EYEBOLTASSEMBLY

AnchorsPower Shaft, Multi-HelixPS8 SCREW ANCHORSJoslyn PS8 CAM ACTION® screw anchors are 1-1/2-inch square shaft, rated at 8,000 ft.-lbs. maximum torque for installation through Class 2 soils. These anchorsare installed by applying the installation forces directly to each extension and arerecommended for difficult soil conditions.

HELIX-SHAFT ASSEMBLIES(1-1/2” SQUARE SHAFT, 8,000 FT.-LBS. TORQUE)Hot Dip Galvanized

Approximate WeightCatalog No. Description (Lbs. Each)J25071ACA 10 & 12” Helix, 36” Spacing, 4’ Length 49J25093ACA (Twin) 8” Helix, 36” Spacing, 4’ Length 39J25123ACA 8 & 10” Helix, 36” Spacing, 4’ Length 49



AnchorsExtension for Power Shaft AnchorsEXTENSION ASSEMBLIES(1-1/2” SQUARE SHAFT, 8,000 FT.-LBS. TORQUE)Hot Dip Galvanized

Approximate WeightCatalog No. Description (Lbs. Each)J25075.3 3-1/2’ Extension 41J25075.5 5’ Extension 47J25075.7 7’ Extension 63

EXTENSIONASSEMBLY

HELIX-SHAFTASSEMBLY


AnchorsNo-WrenchNO-WRENCH CAM ACTION® SCREW ANCHORSThese anchors can be installed either manually or with power driven equipment.Manual installation is accomplished by inserting a bar through the eye andscrewing the anchor down. Installation with portable or vehicle mounted installingequipment is accomplished by means of adapters. The eye dimensions are the sameas shown on the Threaded Forged-Eye Anchor Rods.

TRIPLEYE® HELIX-SHAFT ASSEMBLIESHot Dip Galvanized

Approximate WeightCatalog No. Description (Lbs. Each)J6524WCA 4” Helix, 3/4” x 54” Shaft 8.1J6526WCA 6” Helix, 3/4” x 66” Shaft 10.9J6528WCA 8” Helix, 1” x 66” Shaft 19.1J6530WCA 10” Helix, 1-1/4” x 66” Shaft 30.3J6550WCA 10” Helix 1-1/4” x 8’ Shaft 41.1J6585WCA 15” Helix, 1-1/4” x 8’ Shaft 52.0


TRIPLEYE® HELIX-SHAFTASSEMBLY

AnchorsExtension for No-Wrench AnchorsEXTENSION ASSEMBLIESHot Dip GalvanizedThe J6566 Tripleye® extension assembly is used with 1-1/4-inch diameter Tripleye®forged eye shaft No-Wrench screw anchors when greater installing depths arerequired.

Approximate WeightCatalog No. Description (Lbs. Each)J6566 1-1/4” x 6’ Shaft 29.0

EXTENSION ASSEMBLY

AnchorsClamps, Auxiliary Anchor Rod EyeHot Dip GalvanizedAuxiliary eye clamps permit an efficient method of addingan eye to an existing anchor rod for attaching an additionalguy wire. The eye has a generous 1-1/2” thimble diameter.

ApproximateWeight

Anchor Rod Maximum (Lbs. Per Catalog No. Dia. Range Strand Size 100 Pcs.)PA155 5/8” – 3/4” 1/2” 270PA155A 7/8” – 1” 1/2” 338

AnchorsInstalling Tool AccessoriesJoslyn offers a complete installing wrench for both power hub and power shaftstyle screw anchors. The patented J-CLAW® Torque Tube Adapter features safetyengineered cam levers for positive and easy engagement of torque tube andanchor/rod assemblies.

J-CLAW® COMPONENTSApproximate

WeightCatalog No. Description (Lbs. Each)J29021.1 3-1/2’ Universal Torque Tube for 1-3/8” Square PH Anchor 28.0J29021.2 7’ Universal Torque Tube for 1-3/8” Square PH Anchor 56.0J29022.1 3-1/2’ Torque Tube for 1-1/2” Square PH Anchor 29.0J29022.2 7’ Torque Tube for 1-1/2” Square PH Anchor 57.0J29010 Torque Tube for 1-1/2” PS6.5 or PS8 Shaft Anchors 11.6J29000 Torque Tube Adapter (Bolts Included) 18.0J29011 Drive Assembly for 1-1/2” PS6.5 or PS8 Anchors Only 10.0

+ Patent No.’s 3,828,562; 3,832,860; 4,580,795; 3,832,861® CAM ACTION and J-CLAW are registered Trademarks of Joslyn.



KELLY BAR ADAPTERS(Kelly bar adapters are used to couple the installing tool drive assembly to theinstalling equipment torque motor output shaft.)

Approximate WeightCatalog No. A D (Lbs. Each)J29005.2 2” Hex 3-1/4” 21.0J29005.3 2-1/2” Hex 4-1/4” 19.0J29005.4 2-5/8” Hex 4-1/4” 17.0

KELLY BAR ADAPTER

TORQUE TUBEADAPTER

TORQUE TUBE

J-CLAW™ASSEMBLY

KELLY BAR ADAPTER


Anchors Rock 1The malleable iron expanding rock anchor fits into a hole 1-7/8-inch or 2-3/8-inchin diameter, expands and wedges firmly against solid rock. When the anchor isexpanded, the greater the pull on the rod, the harder the anchor becomes wedged.No lead, concrete or grouting equipment is necessary. Furnished complete with3/4-inch and 1-inch rods, 15-inch to 8-foot in length. Anchors are coated and therods are hot dip galvanized.

Set in holes drilled a minimum 12-inches deep in Class 1—Hard Rock, these anchorswill develop the full strength of the anchor rod. Rod should be set in line with the guy.Ultimate strength: with 3/4-inch rod, 23,000 pounds; with 1-inch rod, 36,000 pounds.


Rod Anchor Size Anchor Size ApproximateCatalog Diameter Rod Length Closed Expanded Hole Size WeightNo. (Inches) (Inches) (Inches) (Inches) (Inches) (Lbs. Each)J3436 3/4 15 1-3/4 2-3/8 1-7/8 5J3437 3/4 30 1-3/4 2-3/8 1-7/8 7J3438 3/4 53 1-3/4 2-3/8 1-7/8 10JR360 3/4 60 1-3/4 2-3/8 1-7/8 11JR372 3/4 72 1-3/4 2-3/8 1-7/8 12JR384 3/4 84 1-3/4 2-3/8 1-7/8 13JR396 3/4 96 1-3/4 2-3/8 1-7/8 15JR130L 1 30 2-1/4 3-1/8 2-3/8 14JR153L 1 53 2-1/4 3-1/8 2-3/8 18JR172L 1 72 2-1/4 3-1/8 2-3/8 24JR184L 1 84 2-1/4 3-1/8 2-3/8 26JR196L 1 96 2-1/4 3-1/8 2-3/8 29

AnchorsExpandingCoated (Less Rods)The multi-blade, one-piece top plate expands upon impact into undisturbed earthto form a cone shaped square, which distributes the anchor’s holding power over a wide area, building up compression against an inverted pyramid of earth. Theexpanding anchor retains its shape under extremely heavy loads because the baseplate supports the blades in the middle and distributes the load uniformly over theblades. Reinforcing ribs provide additional strength.

Rod Size Holding Strength (Lbs.)Hole (Inches) Soil Class ApproximateSize Area (Order Weight

Catalog No. (Inches) (Sq. In.) Separately) 3 4 5 6 7 (Lbs. Each)J0870 6 70 1/2 or 5/8 16,000 14,000 11,000 8,500 5,000 5J8115 8 115 5/8 or 3/4 24,500 20,500 17,000 14,000 9,000 9J8135 8 135 5/8 or 3/4 26,500 22,000 18,500 15,000 10,000 10J8135-1 8 135 1 26,500 22,000 18,500 15,000 10,000 10J8200-1 10 200 1 31,000 26,500 21,000 16,500 12,000 19J8200-3/4 10 200 5/8 or 3/4 31,000 26,500 21,000 16,500 12,000 19J0283 12 300 1-1/4 40,000 34,000 26,500 21,500 16,000 33J0283-1 12 300 1 40,000 34,000 26,500 21,500 16,000 33

CLOSED

EXPANDED

AnchorsCross PlateCoated (Less Rods)Cross plate anchors are made for installation in holes drilled by power drillers. Cross plate anchors are formed of two structural steel plates that are ribbed forreinforcement.

Rod Size Holding Strength (Lbs.)Hole (Inches) Soil Class ApproximateSize Area (Order Weight

Catalog No. (Inches) (Sq. In.) Separately) 3 4 5 6 7 (Lbs. Each)J3516 16 150 5/8 or 3/4 26,500 22,500 18,500 14,500 9,500 10J3520 20 250 5/8 or 3/4 34,000 29,000 24,000 19,000 14,000 16J3520-1 20 250 1 34,000 29,000 24,000 19,000 14,000 16J3524-3/4 24 400 5/8 or 3/4 45,000 37,000 30,000 23,500 18,000 33J3524 24 400 1 45,000 37,000 30,000 23,500 18,000 33J3524-1 24 400 1-1/4 45,000 37,000 30,000 23,500 18,000 33



AnchorsPole Key (Expanding)CoatedThis expanding anchor keys poles at their butt to reinforce them againstunbalanced loads in soft soils. Placed at the bottom of the hole, behind the pole, itis easily expanded into solid earth and eliminates the necessity for digging atrench for installing a wood key.

Width Expanded Blade Width Area Expanded Approximate WeightCatalog No. (Inches) (Inches) (Sq. In.) (Lbs. Each)J4817 27-1/4 7 276 25


AnchorsRods, Threaded, Forged-EyeHot Dip GalvanizedJoslyn forged Thimbleye®, Twineye®and Tripleye® anchor rods are used for guying with expanding and crossplate as well as “Deadman” log anchorassemblies. All rods are threaded 3-1/2-inches and are assembled with a heavy square nut.

MinimumThimbleye® Twineye® Tripleye®Ultimate

Rod Strength Approx. Approx. Approx.Diameter Rating Length Catalog Weight Catalog Weight Catalog Weight(Inches) (Pounds) (Feet) No. (Lbs. Each) No. (Lbs. Each) No. (Lbs. Each)5/8 16,000 5 J7415 5.4

6 J7416 6.4 J7516 6.57 J7417 7.5 J7517 8.08 J7418 8.0 J7518 8.4

3/4 23,000 7 J7427 11.0 J7527 11.0 J7327 11.28 J7428 12.5 J7528 12.4 J7328 12.59 J7429 14.0 J7529 14.0 J7329 14.3

10 J7430 15.0 J7530 15.71 36,000 8 J7538 22.9 J7338 22.0

10 J7540 28.4 J7340 27.01-1/4 58,000 10 J7350 44.0


THIMBLEYE®

TWINEYE®

TRIPLEYE®

AnchorsRods, Threaded, Forged EyeHot Dip Galvanized

EYE DIMENSIONSThimbleye® Twineye® Tripleye®Rod

Diameter Dimensions (Inches) Dimensions (Inches) Dimensions (Inches)(Inches) A B C D R A B C D R A B C D R RR5/8 11/16 9/16 1-1/2 1-11/16 11/16 15/16 1/4 1-13/16 1-23/64 11/163/4 13/16 11/16 1-5/8 1-7/8 3/4 1 1/4 1-31/32 1-5/8 11/16 1-9/16 1/4 2-5/8 1-7/16 19/32 5/81 1-1/4 5/16 2-3/8 1-3/4 11/16 1-9/16 1/4 2-23/32 1-5/8 11/16 21/321-1/4 1-9/16 1/4 2-15/16 1-7/8 27/32 15/16

AnchorsRods, Threaded, Forged EyeCopperbondedJoslyn’s copperbonded integral forged eyeanchor rods provide a one piece solidconstruction, eliminating the need for themore costly bronze eyenut/threadedcopperbonded anchor rod assemblies. The forged anchor rods are bonded with a 10 mil thickness of copper. Each rod isfurnished with 3-1/2 inches of thread andan assembled bronze square nut.

Breaking Strength Approximate WeightCatalog No. Description (Lbs.) (Lbs. Each)J25828.1 5/8” x 7’ Twineye® 16,000 8.2J25828.2 5/8” x 8’ Twineye® 16,000 8.6J25829.2 3/4” x 8’ Twineye® 23,000 12.7J25829.3 3/4” x 9’ Twineye® 23,000 14.3J25830.4 1” x 10’ Tripleye® 36,000 27.6



Arm, Steel DeadenedHot Dip GalvanizedThese galvanized steel bracketscombine strength, durability and a lowsilhouette design for deadend crossarmconstruction. The brackets areassembled with two standard eyeletsfor deadending. The pole mountingplate features an integral pole eyeplate with 13/16-inch diameter hole toattach fittings for down guying.

Dimensions (Inches)Mtg. Bolt Approximate Weight

Catalog No. A B C D (Lbs. Per 100 Pcs.)PAX188UB 58-1/2 5/8 60 8 3170



Attachments, Guy HookHot Dip GalvanizedGuy hooks are cast from high strengthmalleable or ductile iron. They providean efficient and economical attachmentfor down guys. Guy hooks are availablein two styles. The integral spur stylefeatures spurs and teeth in the lowerbase to resist downslotting of theattachment. The lag screw styleprovides a hole in the lower base tosecure the attachment from movement.

IntegralSpur

Integral Spur Style for mounting with a through-bolt only.

P132X P133AXP134AXWP134BX P135AXW

P138 P151X P152X P157X

Attachments, Guy HookHot Dip Galvanized

Dimensions (Inches) 45°Ultimate Weight

Overall Mtg. Hole Mtg. Slot Strength (Lbs. PerCatalog No. Height A B C S D E (Lbs.) 100 Pcs.)P133AX 5-1/2 3-15/16 1-5/8 — 13/16x1 2-1/2 2-7/8 20,050 150P134AXW 4-3/4 3-3/8 1-9/16 — 13/16x7/8 2-3/8 2-5/8 20,050 128P134BX 5-3/8 3-5/8 1-5/8 — 13/16x15/16 3-1/4 2-3/4 20,050 177P135AXW 4-1/2 3-1/8 1-1/2 — 11/16x3/4 2-1/8 2-1/2 13,550 102P151X 3-3/4 2-7/8 1-1/4 11/16 — 2-3/4 1-7/8 13,550 95P152X 4-1/4 3-1/8 1-3/8 13/16 — 2-3/4 2-3/8 20,050 108P157X 4-1/4 3-5/8 1-1/4 13/16 — 2-3/4 2-3/8 20,050 96



P134AXWP134BX

P151XP152X

P157X

P133AXP135AXW

Attachments, Guy HookHot Dip Galvanized


Overall Mtg. Hole Mtg. Slot Strength (Lbs. PerCatalog No. Height A B C S D E (Lbs.) 100 Pcs.)P132X 6-3/4 3-3/4 1-7/8 — 15/16x1 2-3/4 3-1/2 27,700 362P138 6-1/4 1-13/16 1-13/16 15/16 — 4 3-7/8 27,700 263

P132X P138


Attachments, Guy HookHot Dip GalvanizedThrough Bolt and 1/2” Lag Screw StyleThese guy hooks feature a base with integral teeth and ahole for installation of a 1/2-inch diameter lag screw toprovide additional resistance to movement.


Overall Mtg. Hole Strength (Lbs. PerCatalog No. Height A B C D E F (Lbs.) 100 Pcs.)P132C 6-11/16 4-1/4 4 2-1/4 13/16 9/16 2-1/4 20,050 286P133A 5-1/4 2-7/8 3-5/8 1-5/8 13/16 9/16 2-1/2 20,050 152P135A 4-3/4 3-1/2 3-3/4 7/16 11/16 9/16 2-1/2 13,550 128P151A 3-3/4 2-1/4 2-7/8 1/2 11/16 9/16 2-3/4 13,550 86P152A 4-5/16 2-3/4 3-1/8 1/2 13/16 9/16 2-3/4 20,050 103


P133AP135A

P132C

P151AP152A

Attachments, GuyHot Dip GalvanizedJoslyn Guy Attachments provide an economical and efficientmeans of fastening guys to poles. Well rounded wire groovesprotect the strand from damage.

The formed steel style guy attachments feature a closedstrand loop.

The ears of the malleable guy attachments will accommodateany type of guy loop or clamp bail. The lower mounting holeis for a 1/2-inch lag screw.

Wherever possible, installation should be made under the headof a machine bolt. Guy attachments are not recommended tobe mounted on the threaded end of a bolt as tensile andbending stresses on bolt threads can result in premature boltfailure less than the bolt minimum tensile strength.

One-Bolt Formed Steel Type

45°Hole Ultimate Approximate

Steel Size Diameter Strength Shipping WeightCatalog No. (Inches) (Inches) (Lbs.) (Lbs. Per 100 Pcs.)J25164 2 x 3/16 11/16 10,000 113J6506 2 x 1/4 13/16 20,050 156

Malleable Iron Type

Maximum 45°Bolt Hole Strand Ultimate ApproximateDiameter Diameter Strength Shipping Weight

Catalog No. (Inches) (Inches) (Lbs.) (Lbs. Per 100 Pcs.)J6555 11/16 1/2 13,550 105J6556 13/16 9/16 20,050 120



ONE-BOLT

J25164

MALLEABLE IRON

J6555


Attachments, Guy, Strain InsulatorHot Dip GalvanizedThis Guy Attachment is designed for direct pole attachmentof fiberglass strain insulators.

The J2575 forged steel guy attachment features a curved,spiked pole mounting surface. It provides the closest possiblecoupling between the pole bolt and the insulator, and theangle of the down-guy can be varied without bending theguy attachment because of the position of the hole for thestrain insulator. Both holes are 13/16-inch diameter for 3/4-inch bolts.

45° Ultimate ApproximateStrength Shipping Weight

Catalog No. (Lbs.) (Lbs. Per 100 Pcs.)J2575 15,000 75


J2575

Attachments, Guy Hook, Combination TypeHot Dip GalvanizedCombination type guy attachments provide flexibility to terminate guy wire orfiberglass guy strain insulators.

Dimensions (Inches) 45°Ultimate WeightStrength (Lbs. Per

Catalog No. A B C D E F (Lbs.) 100 Pcs.)P345 3 2 2-3/8 13/16 11/16 11/16 21,000 190P345LT 3 2 2-3/8 13/16 11/16 11/16 21,000 190P345A 4-1/2 2-1/8 4 13/16 7/8x1-3/4 13/16 21,000 295P345D 3 2-1/8 2-3/8 13/16 11/16 13/16 21,000 160P345DLT 3 2-1/8 2-3/8 13/16 11/16 13/16 21,000 160P350 4 2-1/4 2-3/8 13/16 13/16 13/16 21,000 240P351 6 3-1/8 3 13/16 13/16 1-1/4 36,000 510

LT suffix indicates less teeth—can be used on steel or concrete poles.P345A

P345, P345LT, P345D & P345DLT

P350P351

Attachments, Guy, Pole Eye Plate 1Hot Dip GalvanizedPole eye plate attachments are usedwith fiberglass guy strain insulators or thimble clevises in guying ordeadending applications. The baseincorporates integral spurs and teeth to resist downslotting.



PX88


Catalog No. A B C D E F G (Lbs.) 100 Pcs.)PX88 7 2-1/8 4 4 13/16 13/16 13/16 21,000 277

Attachments, Guy, Pole Eye PlateHot Dip Galvanized


Catalog No. A B C D E (Lbs.) 100 Pcs.)PX39 5-1/4 1-1/2 1-3/4 13/16 11/16 15,000 132P139 6-1/4 1-3/4 4 15/16 13/16 21,000 243

PX39P139


Attachments, Guy, Pole Eye PlateHot Dip Galvanized


Catalog No. A B C D E L (Lbs.) 100 Pcs.)PX37B 6 2-1/2 3-7/8 15/16x1-5/8 slot 15/16 8-7/16 36,000 660PX37BLT 6 2-1/2 3-7/8 15/16x1-5/8 slot 15/16 8-7/16 36,000 660PX37D 6 2-1/2 3-7/8 13/16 1-1/8 8-7/16 36,000 637PX40 8 2-1/2 4 15/16 15/16 11-5/16 42,000 1000PX42 8 3-1/8 2-1/2 15/16 15/16 11-1/4 42,000 1100

LT suffix indicates less teeth—can be used on steel or concrete poles.


PX37PX37BLTPX37D

PX40

PX42

Balcony, PoleHot Dip Galvanized with Painted Wooden SeatsJoslyn’s Balconies are used on poles equipped with terminal boxes or switchingequipment to provide a safe working platform for either a sitting or standingposition for linemen who must remain aloft over long periods of time.

Ordering InformationApproximate

Shipping WeightCatalog No. (Each)JCA7527.B 65JCA7527.C 36JCA7928.B 103



JCA7527.C “C” TERMINAL BALCONY

JCA7527.C, “C” Terminal Balcony issimilar to the JCA7527.B “B” TerminalBalcony except it is supplied withoutthe guardrail.

JCA7527.B “B” TERMINAL BALCONY

JCA7527.B “B” Terminal Balcony has a16-inch x 13-inch platform which ishinged so it can be turned verticallywhen not in use to avoid accumulationof snow and moisture. The JCA7527.Bmounts onto the pole with 5/8-inchfasteners.

JCA7928.B “B” CABINET BALCONY

JCA7928.B “B” Cabinet Balcony has a26-inch x 24-inch platform which canbe firmly latched up when not in use.The JCA7928.B is supplied with anentrance step. When mounting ontothe pole, use 5/8-inch bolts.


Bands, PoleHot Dip GalvanizedJoslyn pole bands have been designed to accommodate awide range of distribution pole diameters. Each unitincorporates four (4) 3/4-inch diameter studs and each bandsection has 9/16-inch square holes for lag screws.

Ultimate Tensile Strength: 20,000 Lbs.Band Section: 1/4” x 4” (Except J6643 = 5/16” x 3”)Connecting Link Mounting Positions: All Four Sides

Pole Diameter WeightCatalog No. Range (Inches) (Lbs. Each)J6641 9-1/2 – 13-1/2 16.0J6643 7 – 9-1/2 13.2J6644 8 – 11 15.0J6684 12 – 16 18.6


Bands, Pole, AccessoriesHot Dip Galvanized

Connecting Links (Pairs)Size Ultimate

(Thickness) Length Hole Strength Weight(Width x Length) (From the Centers) Size Rating (Lbs. Per

Catalog No.* (Inches) (Inches) (Inches) (Lbs.) 100 Pcs.)J6650 1/4 x 2 x 9-1/2 7-1/2 13/16 20,000 261J6650F 1/4 x 2 x 9-1/2 7-1/2 15/16 26,000 259

*Catalog No. denotes one (1) pair.

J6650J6650F

HOLE DIAMETER(4 PLACES)

Bands, Pole, Accessories (continued)

Hot Dip Galvanized

Guy RollersHole Wireseat Weight

D Size H Radius T (Lbs. PerCatalog No. (Inches) (Inches) (Inches) (Inches) (Inches) 100 Pcs.)J6288 2-1/2 13/16 2-1/8 1/4 11/16 72J23186.0 2-15/16 15/16 2-7/16 7/16 7/8 136



Extension LinksSteel L H ApproximateSize Length Hole Size Shipping Weight

Catalog No. (Inches) (Inches) (Inches) (Lbs. Per 100 Pcs.)J2520 1/2 x 1-3/4 6 13/16 176J2522 1/2 x 1-3/4 12 13/16 325

J2520J2522

Guy AttachmentsApproximate

Shipping WeightCatalog No. Type (Lbs. Per 100 Pcs.)J6273 Single 324J6274 Double 607

J6273

J6274


Bands, Universal PoleHot Dip GalvanizedJoslyn Universal wrap-around type pole bands are ideal for deadending, guying andspar arm suspension assemblies. They can be installed in a matter of minutes. Eachband is assembled with one 3/4-inch curved bolt and one J6277 cone head bolt.

ApproximatePole Diameter Range Steel Size Shipping Weight

Catalog No. (Inches) (Inches) (Lbs. Per 100 Pcs.)J6280 6 – 10 4 x 3/16 1,100J6270 8 – 14 4 x 3/16 1,400


Bands, Universal Pole, AccessoriesHot Dip GalvanizedCone Head Bolts are used to attach fittings to universal bands. Installed from theinside of the band, the square shoulder fits into the rectangular band slots, and the special head digs into the pole to counteract band slippage.

The J6157 Clevis is designed to surround the 4-inch wide section of a universal pole band, developing great strength for deadending. The deadend clevis isfurnished complete with a 3/4-inch bolt, square nut, concave lock nut and self-locking cotter key.

The J6275 clip is used to attach guy strand. The J6275 has a malleable oval thimblewhich will not rotate in the clip.

ApproximateSteel Size Shipping Weight

Catalog No. Description (Inches) (Lbs. Per 100 Pcs.)J6277 Cone Head Bolt 3/4 x 2-1/2 50J6157 Deadend Clevis 2-1/2 x 3/16 310J6275 Guy Clip 3 x 3/16 240

CONE HEAD BOLT DEADEND CLEVISES

J6157J6277

GUY CLIPS

J6275

Bayonets, Ground WireHot Dip GalvanizedJoslyn Ground Wire Bayonets are used for supportingoverhead ground wires. Clamps are not included and shouldbe ordered separately. Top hole and slot are 9/16-inchdiameter on 2-inch hole centers for mounting clamps with1/2-inch diameter bolts.

The straight type consists of one angle with clamp holespunched in both legs to permit mounting the bayonet toeither the face or the side of the pole. Straight bayonets alsohave a 7/16-inch diameter hole at the bottom for a groundlug if required.

Corner bayonets consist of two angle sections and two 1/2-inch bolts for fastening them together. One angle isoffset to fit 8-inch diameter poles; however, the legs caneither be spread or pushed together to fit other diameters.The mounting bolt holes in the bent legs are slotted to allowfor any pole boring inaccuracy.

All bayonets have mounting holes for 5/8-inch bolts.



TOP OF STRAIGHT CORNER TOP OFSTRAIGHT BAYONET BAYONET CORNERBAYONET

Straight Bayonets

Dimensions (Inches) ApproximateShipping Weight

Catalog No. A E Angle Size (Lbs. Per 100 Pcs.)J1130 36 10 2 x 2 x 1/4 960J1132 48 12 2-1/2 x 2-1/2 x 1/4 1600J1134 84 20 3 x 3 x 1/4 3400

Corner Bayonets

Dimensions (Inches) ApproximateShipping Weight

Catalog No. A E Angle Size (Lbs. Per 100 Pcs.)J1135 36 10 2 x 2 x 3/16 1400J1136 48 12 2 x 2 x 3/16 1952J1137 66 15 2 x 2 x 1/4 3440J1139 84 20 2-1/2 x 2-1/2 x 1/4 5570

Bolts, BraceHot Dip GalvanizedThe J8624-1/2 Brace Bolt is used in place of a carriage boltfor fastening a brace to a crossarm. The one-piece washerhead provides a square head for wrenching.

Minimum Tensile Strength: 4650 lbs.

ApproximateSize Thread Length Shipping Weight

Catalog No. (Inches) (Inches) (Lbs. Per 100 Pcs.)J8624-1/2 3/8 x 4-1/2 2 21.0


Bolts, CarriageHot Dip GalvanizedJoslyn carriage bolts are roll threaded with square shoulderand square nut.


3/8 Inch Diameter – Minimum Tensile Strength 4,650 Lbs.

Bolt Thread ApproximateLength Length Shipping Weight

Catalog No. (Inches) (Inches) (Lbs. Per 100 Pcs.)J8634 4 3 16.2J8634-1/2 4-1/2 3 16.4J8635 5 3 17.6J8635-1/2 5-1/2 3 20.0J8636 6 3 21.6J8637 7 4 24.0J8638 8 4 26.4J8640 10 4 32.0

1/2 Inch Diameter – Minimum Tensile Strength 8,500 Lbs.

Bolt Thread ApproximateLength Length Shipping Weight

Catalog No. (Inches) (Inches) (Lbs. Per 100 Pcs.)J8644-1/2 4-1/2 3 34.3J8645 5 3 35.3J8646 6 3 40.5J8647 7 4 44.0J8648 8 4 51.0

Bolts, ClevisHot Dip GalvanizedJoslyn 5/8-inch diameter clevis bolts have cone points and are furnished with onesquare nut and one 1/2-inch diameter machine bolt, with nut and self-lockingcotter pin.

A L ApproximateDiameter Length Shipping Weight

Catalog No. (Inches) (Inches) (Lbs. Per 100 Pcs.)J7810 5/8 10 172J7812 5/8 12 192J7814 5/8 14 208

Bolts, Double ArmingHot Dip GalvanizedJoslyn Double Arming Bolts are roll threaded, with conepoints at both ends for easy driving and removal without



5/8-Inch Diameter – Minimum Tensile Strength 13,550 Lbs.

ApproximateBolt Length Shipping Weight

Catalog No. (Inches) (Lbs. Per 100 Pcs.)J8860 10 18J8862 12 136J8864 14 142J8866 16 158J8868 18 187J8870 20 192J8872 22 208J8874 24 224J8876 26 240J8877 28 256J8878 30 264J8879 32 284J8880 34 295J8881 36 332


ApproximateBolt Length Shipping Weight

Catalog No. (Inches) (Lbs. Per 100 Pcs.)J8882 12 196J8884 14 220J8886 16 240J8888 18 260J8890 20 284J8892 22 304J8894 24 336J8896 26 345J8897 28 365J8898 30 386J8899 32 400J9003 34 420J9004 36 460

Bolts, Machine, “A” Cable SuspensionHot Dip Galvanized“A” Cable Suspension Bolts are supplied with two squarenuts. One nut is used to fasten the square head bolt to thepole and the other nut is used to secure a straight or anglecable suspension clamp to the bolt.

Minimum Tensile Strength: 5/8” = 13,550 lbs.; 3/4” = 20,050 lbs.; 1” = 36,350 lbs.

damage to threads. “D.A.” bolts are furnished with foursquare nuts. Length dimensions do not include the points.

Bolt “L” Bolt “T” Thread WeightDiameter Length Length (Lbs. Per

Catalog No. (Inches) (Inches) (Inches) 100 Pcs.)JCA6645.A01 5/8 8 4 85JCA6645.A02 5/8 10 6 104JCA6645.A03 5/8 12 6 120JCA6645.A04 5/8 14 6 138JCA6645.A05 5/8 16 6 153JCA6645.A06 5/8 18 6 168JCA6645.A07 5/8 20 6 192JCA6645.A10 3/4 10 6 165

Bolt “L” Bolt “T” Thread WeightDiameter Length Length (Lbs. Per

Catalog No. (Inches) (Inches) (Inches) 100 Pcs.)JCA6645.A11 3/4 12 6 187JCA6645.A12 3/4 14 6 204JCA6645.A13 3/4 16 6 220JCA6645.A14 3/4 18 6 245JCA6645.A15 1 12 6 360JCA6645.A16 1 14 6 410JCA6645.A17 1 16 6 450

JCA6645.A Series


Bolts, Double End, “B” Cable SuspensionHot Dip Galvanized“B” Cable Suspension Bolts arethreaded on both ends and are supplied with four square nuts. Theyare used on poles and crossarms fordouble deadending applications witheyenuts, or to secure cable suspensionclamps. The unthreaded center of the bolts are stamped with ourmanufacturer’s identification mark and include markings relating to “Bell”designations for ‘system’ tensile loadratings.


JCA6645.B Series

Minimum Tensile Strength: 5/8” = 13,550 lbs.; 3/4” = 20,050 lbs.Bolt “L” Bolt “T” Thread Weight

Diameter Length Length (Lbs. PerCatalog No. (Inches) (Inches) (Inches) 100 Pcs.)JCA6645.B01 5/8 10 3 119JCA6645.B02 5/8 12 4 133JCA6645.B03 5/8 14 6 148JCA6645.B04 5/8 16 6 168JCA6645.B05 5/8 18 6 184JCA6645.B06 5/8 20 8 196JCA6645.B07 5/8 22 8 208JCA6645.B10 3/4 14 6 212JCA6645.B11 3/4 16 6 235JCA6645.B12 3/4 18 6 265JCA6645.B13 3/4 20 8 280

Bolts, MachineHot Dip GalvanizedSquare Head and Square NutJoslyn machine bolts are roll threaded. Bolts 1/2-inch andlarger in diameter and 7-inch and longer in length also havecone points which permit driving without damage to thethreads. Other lengths and 1-inch diameter machine boltsavailable on special order in production quantities.


ApproximateBolt Length Thread Length Shipping Weight

Catalog No. (Inches) (Inches) (Lbs. Per 100 Pcs.)J8602 2 1-3/4 11.0J8603 3 2-3/4 13.1J8604 4 3 15.0J8604-1/2 4-1/2 3 17.1J8605 5 3 18.2J8606 6 3 20.8J8607 7 4 23.8J8608 8 4 26.8J8610 10 4 31.8



Catalog No. (Inches) (Inches) (Lbs. Per 100 Pcs.)J8701-1/2 1-1/2 1-1/4 18.4J8702 2 1-3/4 20.4J8702-1/2 2-1/2 2-1/4 23.2J8703 3 2-3/4 25.0J8704 4 3 30.8J8705 5 3 36.0J8706 6 3 40.5J8707 7 4 47.5J8708 8 4 50.0J8709 9 4 57.0J8710 10 6 60.0J8712 12 6 70.0J8714 14 6 79.0J8716 16 6 88.8

Bolts, Machine (continued)

Hot Dip GalvanizedSquare Head and Square Nut





Catalog No. (Inches) (Inches) (Lbs. Per 100 Pcs.)J8801-1/2 1-1/2 1-1/4 30.0J8802 2 1-3/4 34.0J8802-1/2 2-1/2 2-1/4 38.0J8803 3 2-3/4 43.5J8804 4 3 50.0J8805 5 3 57.0J8806 6 3 62.0J8807 7 4 72.0J8808 8 4 82.0J8809 9 4 88.0J8810 10 6 94.1J8812 12 6 108.0J8814 14 6 125.0J8816 16 6 136.0J8818 18 6 152.0J8820 20 6 170.0J8822 22 6 184.0J8824 24 6 200.0J8826 26 6 224.0J8828 28 6 242.0



Catalog No. (Inches) (Inches) (Lbs. Per 100 Pcs.)J8902 2 1-3/4 56.8J8903 3 1-3/4 66.8J8906 6 4 101.0J8908 8 4 118.0J8910 10 6 142.0J8912 12 6 162.0J8914 14 6 188.0J8916 16 6 212.0J8918 18 6 228.0J8920 20 6 252.0J8922 22 6 268.0J8924 24 6 296.0J8926 26 6 316.0J8928 28 6 344.0

(7/8-Inch Diameter – Minimum Tensile Strength 27,700 Lbs.


Catalog No. (Inches) (Inches) (Lbs. Per 100 Pcs.)J9062 12 6 240.0J9064 14 6 264.0J9066 16 6 288.0J9068 18 6 320.0J9070 20 6 345.0J9072 22 6 380.0J9074 24 6 430.0

Bolts, Oval EyeHot Dip GalvanizedJoslyn forged oval eyebolts are commonly used with thimbles, clevises and otherpole line hardware items for overhead guying and deadending.

Regular oval eyebolts are roll threaded and furnished with one square nut. Doublearming eyebolts serve as a combination eyebolt and double arming bolt. They havecut threads and come complete with three square nuts. Both types have conepoints to allow driving without damage to the threads and to make the engagingand threading of nuts quicker and easier. Length is measured from below the eye tothe last thread.

The J8930 screw eyebolt has rolled gimlet threads for screwing into trees, poles andcrossarms.

Bolt Eye I.D. MinimumDiameter Width x Length Ultimate(Inches) (Inches) Strength (Lbs.)5/8 1-1/2 x 2 13,5503/4 1-1/2 x 2 20,050


Bolts, Oval Eye (continued)

Hot Dip Galvanized


Oval Eyebolts – 5/8 Inch Diameter, Minimum Tensile Strength 13,550 Lbs.


Catalog No. (Inches) (Inches) (Lbs. Per 100 Pcs.)J9406 6 4 112J9408 8 4 128J9409 9 4 136J9410 10 6 146J9412 12 6 156J9414 14 6 168J9416 16 6 188J9418 18 6 212J9420 20 6 220

Oval Eyebolts – 3/4 Inch Diameter, Minimum Tensile Strength 20,050 Lbs.


Catalog No. (Inches) (Inches) (Lbs. Per 100 Pcs.)J9508 8 4 180J9510 10 6 200J9512 12 6 220J9514 14 6 240J9516 16 6 256J9518 18 6 280

Bolts, Oval Eye (Double Arming)Hot Dip Galvanized

Double Arming Eyebolts – 5/8 Inch Diameter,Minimum Tensile Strength 13,550 Lbs.


Catalog No. (Inches) (Inches) (Lbs. Per 100 Pcs.)J9614 14 12 204J9616 16 14 172J9618 18 16 224J9620 20 18 244J9622 22 20 260J9624 24 22 280J9626 26 24 300

Double Arming Eyebolts – 3/4 Inch Diameter,Minimum Tensile Strength 20,050 Lbs.


Catalog No. (Inches) (Inches) (Lbs. Per 100 Pcs.)J9636 16 14 300J9638 18 16 320J9640 20 18 340J9642 22 20 360J9644 24 22 380J9646 26 24 400

Bolts, Oval EyeHot Dip Galvanized

Screw EyeboltsApproximate

Bolt Diameter Shipping WeightCatalog No. (Inches) (Lbs. Per 100 Pcs.)J8930 1/2 62

Bolts, Shoulder EyeHot Dip GalvanizedJoslyn forged shoulder eyebolts eliminate the need for a washer under the eye.They are used to attach suspension insulators and other pole line hardware tocrossarms and poles. The Joslyn 5/8-inch diameter shoulder eyebolts have aminimum ultimate strength of 13,550 pounds while the 3/4-inch diameter have a minimum ultimate strength of 20,050 pounds.

Dimensions (Inches)L T A B Approximate

D Bolt Thread Eye Stock Eye Shipping WeightCatalog No. Diameter Length Length Diameter Width (Lbs. Per 100 Pcs.)J2258 5/8 8 6 9/16 1-3/4 142J2260 5/8 10 6 9/16 1-3/4 156J2262 5/8 12 6 9/16 1-3/4 170J9528 3/4 8 4 11/16 1-13/16 216J9530 3/4 10 6 11/16 1-13/16 221J9532 3/4 12 6 11/16 1-13/16 248J9534 3/4 14 6 11/16 1-13/16 280J9536 3/4 16 6 11/16 1-13/16 320J9538 3/4 18 6 11/16 1-13/16 340J9540 3/4 20 6 11/16 1-13/16 365



Bolts, SpoolHot Dip GalvanizedJoslyn spool bolts are forged from carbon steel with either a single or doubleintegral washer upset at the insulator end. They are used for side-of-poleinstallation when supporting neutral conductors in single-phase construction andsecondary service wires. The double upset type provide 1-5/8-inch clearancebetween insulator and pole.

These spool bolts have 5/8-inch rolled threads and all associated hardware isfurnished complete as illustrated. The J0101, J101 or J151 insulator must beordered separately.

Single Upset Spool Bolts

Shank Overall Thread ApproximateCatalog No. Length Length Length Shipping Weight(Less Insulator) (Inches) (Inches) (Inches) (Lbs. Per 100 Pcs.)J2343-1/2 9 13-1/2 4 145J2344-1/2 10 14-1/2 4 156J2346-1/2 12 16-1/2 6 173J2348-1/2 14 18-1/2 6 237

Double Upset Spool Bolts

Shank Overall Thread ApproximateCatalog No. Length Length Length Shipping Weight(Less Insulator) (Inches) (Inches) (Inches) (Lbs. Per 100 Pcs.)J2395 9 15 4 165J2396 10 16 4 172J2398 12 18 6 192

SINGLE UPSET DOUBLE UPSET


Bolts, Thimbleye

Hot Dip GalvanizedJoslyn Thimbleye bolts are forged in two styles, straight and bent at a 45-degreeangle. They are used for attaching guys and deadends to poles and crossarms,eliminating the need for thimbles, strain plates, guy hooks and extra strand.

Eye dimensions are the same as for Thimbleye anchor rod (see anchor section).Bolt length is measured from below the eye to the last thread. All Thimbleye boltshave cone points and are roll threaded.

5/8-inch diameter bolts have a minimum ultimate strength of 13,550 pounds; 3/4-inch bolts have a minimum ultimate strength of 20,050 pounds.

Straight Approximate Approximate Bolt Bolt ThreadType Shipping Weight Angle Type Shipping Weight Diameter Length Length

Catalog No. (Lbs. Per 100 Pcs.) Catalog No. (Lbs. Per 100 Pcs.) (Inches) (Inches) (Inches)J8050 124 J8150 130 5/8 8 4J8051 142 J8151 144 5/8 10 4J8052 160 J8152 162 5/8 12 6J8053 172 J8153 184 5/8 14 6J8054 186 J8154 206 5/8 16 6J8055 204 5/8 18 6

J8161 216 3/4 10 4J8062 228 J8162 240 3/4 12 6J8063 256 J8163 264 3/4 14 6


Braces, Alley ArmHot Dip GalvanizedAlley arms, crossarms mounted to one side of the pole, require rigid bracing toinsure proper alignment of power distribution and transmission lines. Sturdy Joslynangle steel alley arm braces mount at a 45-degree angle and come complete with asolidly welded lineman step.

These braces are mounted to the side of the arm by a machine bolt and attached tothe pole with two 1/2-inch lag screws.

BBrace Mtg. Approximate

Angle Size Length A Hole Dia. Shipping WeightCatalog No. (Inches) (Feet) (Inches) (Inches) (Lbs. Per 100 Pcs.)J1522 1-3/4 x 1-3/4 x 3/16 5 30 9/16 1,300J1525 1-3/4 x 1-3/4 x 3/16 7 30 11/16 1,750J1526 2 x 2 x 1/4 10 50 11/16 3,600

STRAIGHT ANGLETYPE TYPE

Braces, AngleHot Dip GalvanizedThese braces are used as tension members on the side of the arm opposite the oddconductor to compensate for the unbalanced load. The pole mounting end isflattened so the brace can be used as either a right-hand or left-hand member.

Dimensions (Inches) ApproximateH A B Shipping Weight

Catalog No. Hole Dia. Span Drop (Lbs. Per 100 Pcs.)J1442 11/16 42 27 950



Braces, Crossarm, Flat SteelHot Dip GalvanizedFlat crossarm braces, used in pairs, are an inexpensive means of aligning and supporting crossarms.

Mounting hole diameters are 7/16-inch for 3/8-inchcrossarm mounting bolts and 9/16-inch for pole mountingwith 1/2-inch lag screw or through bolt. Hole centers are 1-inch from the brace ends, which are rounded for extrasafety.

Braces, Double Span, Steel (Angle)Hot Dip GalvanizedOne piece, angle steel, double span braces are used tosupport heavy crossarm construction. Braces are attached tothe underside of the crossarm with 1/2-inch bolts or lagscrews and fastened to the pole with a 5/8-inch bolt. Thepole mounting section is designed to allow more than ampleclearance for wrenching.

ApproximateAngle Size Span Drop Shipping Weight

Catalog No. (Inches) (Inches) (Inches) (Lbs. Per 100 Pcs.)J1506 1-1/2 x 1-1/2 x 3/16 42 12 800J1514 1-1/2 x 1-1/2 x 3/16 48 18 1000J1508 1-1/2 x 1-1/2 x 3/16 60 18 1100J1510 1-3/4 x 1-3/4 x 3/16 60 18 1340J1512 1-3/4 x 1-3/4 x 3/16 72 22 1500J26853.1* 1-3/4 x 1-3/4 x 3/16 40 14-3/4 1000*13/16” diameter holes and slots.

1-1/4” x 1/4” SizeM.H.C.* Approximate

Length Distance Shipping WeightCatalog No. (Inches) (Inches) (Lbs. Per 100 Pcs.)J7126 26 24 215J7128 28 26 235J7130 30 28 255J7132 32 30 200

*M.H.C. Mounting Hole Center


Braces, Crossarm, WoodAll Joslyn wood crossarm braces are engineered for maximumdurability. Strength and extended service life are achievedthrough the combination of galvanized end fittings andpreservative treated, extra strong Apitong wood.

Side Arm StyleJoslyn’s inexpensive, side arm style wood brace is designedespecially for rural lines. These braces are used in place offlat steel braces for increased impulse insulation strength.All have a 13/16 x 1-3/4-inch Apitong preservative treatedwood.The popular J5526 has sturdy hot dip galvanized bolted endfittings and the brace is fastened to the arm with 3/8-inchbolts and to the pole with 1/2-inch lag screws.

Crossarm Pole ApproximateCatalog No. Span Drop Mounting Hole Mounting Hole Shipping Weight(One Pair) (Inches) (Inches) Diameter (Inches) Diameter (Inches) (Lbs. Each Pair)J5526 38 17-3/4 7/16 9/16 3.2


J5526 BRACESIDE ARM MOUNTING

J5526

Braces, Reversible Crossarm, WoodUnderarm StyleJoslyn’s reversible braces provide reliable performance while eliminating the potentialhandling, inventory, and construction problems associated with right- and left-handbraces. The underarm mounting static-proof reversible series is produced from 1-3/4-inch square high density Apitong wood, with 9/16-inch diameter crossarm mountingholes and 11/16-inch diameter holes for pole mounting.

Sizing InformationCatalog No. Span Drop Approximate Shipping Weight(One Pair) (Inches) (Inches) (Lbs. Each Pair)J4788R 48 18 10.0J4760R 60 18 10.0J4730WR 60 30 11.5J4766R 66 20 11.0J4772R 72 22 11.5

FITTINGDETAIL

SIDE VIEW

Braces, Guard ArmHot Dip GalvanizedJoslyn J8240 guard arm braces are used for light dutysupport and stability of crossarms in telecommunicationsconstruction. They are mounted to the crossarm with a 3/8-inch diameter bolt and to the pole with a 1/2-inchdiameter lag screw.



Approximate WeightCatalog No. (Lbs. Per 100 Pcs.)J8240 170

Brackets, AngleHot Dip Galvanized

Clevis Bolt Mounted StyleJoslyn Angle Brackets provide extra clearance for supportinginsulator strings and other suspension hardware at anglestructures. These angle brackets have closed, drop forgedoval eyes. They are fastened to the crossarm or pole bymeans of drop forged clevis bolts. (See Bolts, Clevis forfurther details.)

Stock ApproximateDiameter Shipping Weight

Catalog No. (Inches) (Lbs. Per 100 Pcs.)J7936 3/4 520

J7936


Brackets, Apparatus MountingHot Dip GalvanizedJoslyn apparatus mounting brackets are engineered forstrength, durability and a wide variety of mountingapplications including arresters, cutouts, combination unitsand terminators.

Approximate Shipping WeightCatalog No. (Lbs. Per 100 Pcs.)J24515 254J24516 160J24517 100J26620C 110J26634 264J26482 350


J24515

J26634

J24517

J24516

J26620C

J26482

Brackets, Apparatus Mounting (continued)

Hot Dip Galvanized

Approximate Shipping WeightCatalog No. (Lbs. Per 100 Pcs.)J24673 330J24711 350J24712 340J26167 425J26639 350J26725 360J26559 160J26560 264



J24712

J24711

J26725

J24673

J26559

J26639

J26167

J26560


Brackets, Apparatus Mounting (continued)

Hot Dip Galvanized

Overhead Pole Brackets

ApproximateShipping Weight

Catalog No. (Lbs. Per 100 Pcs.)J24518 415J24519 388J24665 810J26171 600J26190 780


J24519

J24665

J26171

J26190

J24518

Brackets, Equipment and InsulatorSingle Position

Hot Dip GalvanizedThe cast brackets permit the vertical installation of arresters,cutouts, terminators and pin-type or post-type insulators.The pole mounting base hole and slot accommodate 5/8-inchdiameter bolts.

Dimensions (Inches) Approximate WeightCatalog No. A B C D E F (Lbs. Per 100 Pcs.)P346 12 3-1/4 5 13/16 11/16 3-1/2 690



Three Position

Hot Dip GalvanizedThese brackets permit three position mounting of insulator pins, arresters,terminators or cutouts. The pole mounting base has a hole and a slot toaccommodate 5/8-inch diameter mounting bolts.

Dimensions (Inches) Approximate WeightCatalog No. A B C D E F (Lbs. Per 100 Pcs.)P613 12 3-1/2 8 — 5 11/16 765P613D 12 3-1/2 8 — 5 13/16 755P619 18 3-1/2 8 8-3/4 5 11/16 1365


Brackets, InsulatorDouble and Triple Insulator Mounting

Hot Dip Galvanized

Dimensions (Inches) Approximate WeightCatalog No. Mtg. Bolt A B C D E F (Lbs. Per 100 Pcs.)P538 5/8 13-3/8 15 3-1/2 3 1 4 1600


P538

Hot Dip Galvanized

Dimensions (Inches) Approximate WeightCatalog No. Mtg. Bolt Dia. A B C D Rating (Lbs. Per 100 Pcs.)P535 5/8 6 1-7/8 13/16 5° 35kV 305P535

Brackets, Cast, Angle Double DeadendHot Dip GalvanizedThese brackets allow angle constructionapplications by deadending to the twotermination points of the bracket. Polemounting slots are 15/16 inch x 1-1/2inch to accommodate 7/8-inchdiameter bolts.

ApproximateCatalog 45° Ultimate WeightNo. Strength (Lbs.) (Lbs. Per 100 Pcs.)PX44 40,000 770

Brackets, Cable SpacerHot Dip GalvanizedThe PA328 cable spacer bracket provides a 12-inch clearancefrom the pole and is fastened with two 5/8-inch mountingbolts. Clamp plates are reversible to accept a wide range ofmessenger diameters.

Dimensions (Inches) Approximate WeightCatalog No. B C D Diameter Range (Lbs. Per 100 Pcs.)PA328 8 12 5/16 - 5/8 1129



Brackets, Cable RiserHot Dip GalvanizedThese brackets will accommodate from one to three conduits up to 6-inch diametereach. The conduit is secured by banding to the post on the bracket. Mounting isaccomplished with a 5/8-inch diameter machine bolt.

Dimensions (Inches) Approximate WeightCatalog No. A B C (Lbs. Per 100 Pcs.)P396 11/16 4 10-1/2 270


Brackets, Cable ExtensionHot Dip GalvanizedThese Cable Extension Arms are used to support a telephone cable at a distancefrom the pole.

The messenger cable is held by a standard J1096 suspension clamp which is boltedup against the underside of the two angles by a 5/8-inch machine bolt. Thismachine bolt is fitted between the legs of the two angles and can be adjusted forproper extension from the pole.

Mounting is accomplished by a 5/8 or 3/4-inch machine bolt at the upper positionand two 1/2-inch lag screws at the lower. Mounting bolts and suspension clampmust be ordered separately.

Extension From ApproximateCenter of Pole Shipping Weight

Catalog No. Angle Size (Inches) (Inches) (Lbs. Per 100 Pcs.)J7920 3 x 2-1/2 x 1/4 17-1/2 – 26 2900J7921 3-1/2 x 2-1/2 x 5/16 26-1/2 – 44-1/2 6000


Brackets, Deadend TongueHot Dip GalvanizedThe forged steel J515 Deadend Tongue may be used withvirtually all strain insulator clevises and clevis-typesuspension insulators. The tongue opening is 2-1/8 x 1-inch,and the mounting hole is 11/16-inch for 5/8-inch machineor double arming bolts.

Ultimate ApproximateDeadend Strength Shipping Weight

Catalog No. (Lbs.) (Lbs. Per 100 Pcs.)J515 10,000 92

Brackets, Neutral ExtensionHot Dip GalvanizedThe J2352 is designed for new construction and accommodates pole diameters of 6to 11 inches. The pole end consists of a 5/8-inch bolt, welded washer, square nutand lock nut and, the spool end consists of a flat steel brace, two round washers,square nut and self-locking cotter key.

Spool insulators and lag screws are ordered separately.

ApproximateCatalog No. Shipping Weight(Less Insulator) (Lbs. Per 100 Pcs.)J2352 800

J2352

Brackets, Neutral WireHot Dip GalvanizedThe J25670 is a non-insulating malleable iron bracket for polemounting of neutral wire. The bracketaccommodates wire diameter up to and including .666-inch (336.4AAC).The bracket includes spikes in themounting surface which, upon installation, embed into wood pole to resist movement. A 11/16 x 1-inchslot accommodates 5/8-inch diametermounting bolt.


Catalog No. (Lbs. Per 100 Pcs.)J25670 155



Brackets, Pole TopHot Dip GalvanizedJoslyn Pole Top Brackets are used with either a post insulator and stud or a shortshank insulator pin. The brackets are mounted with 5/8-inch bolts.



Brackets, Neutral WireHot Dip GalvanizedThe pole mounting base of these neutral wire brackets arefurnished with integral spikes to resist movement and allowmounting with a single 5/8-inch machine bolt.

Catalog Dimensions (Inches) Approximate WeightNo. Fig. A B C D (Lbs. Per 100 Pcs.)PX77 1 11/16 7/8 2-7/8 1-5/8 115PA362 2 11/16 14-1/8 5-1/2 3-1/4 796

Figure 1PX77

Figure 2PA362


Brackets, Pole TopHot Dip GalvanizedPole top brackets are used to mount line post insulators and provide increaseddistance in separation of the middle phase.

Dimensions (Inches)Mtg. Bolt Approximate Weight

Catalog No. Dia. A B C D Rating (Lbs. Per 100 Pcs.)P523 5/8 8 5 6-1/2 13/16 35kV 756P526 5/8 8 5 5 13/16 35kV 633P528 5/8 5 — 5 13/16 35kV 500P532 3/4 8 5 5 13/16 69kV 860P533 3/4 — — — 13/16 69kV 500


Brackets, Post InsulatorHot Dip GalvanizedJoslyn line post brackets are designedfor use with distribution post insulatorswith short shank stud bolts. They areoffered with 7-1/2” and 10” offsetspacing. Pole mounting spacing is 10”for all brackets.

B ApproximateDimensions Shipping Weight

Catalog No. (Inches) (Lbs. Per 100 Pcs.)J25255.1 11/16 600J25256.1 11/16 800J25256.2 13/16 800

J25255.1

J25256.1J25256.2

Brackets, Pole Brace ConnectorHot Dip GalvanizedPole brace connector brackets will permit anattachment angle up to 90° with the pole. Thepole contacting surface is curved with integralteeth for maximum stability and distribution ofthe load.

The PAX134 series has one center polemounting bolt hole in each bracket section. ThePAX138 bracket sections have three mountingholes for flexibility of normal or heavy dutybracing applications. The center pole mountinghole is used for normal loads or the two outerholes are used for heavy loads.

Dimensions (Inches) ApproximatePole Diameter Base Mounting Bolt Weight

Catalog No. Range Surface Hole (Lbs. Per 100 Pcs.)PAX134 4-1/2 – 7 3-1/4 x 5-3/4 11/16 677PAX134A 4-1/2 – 7 3-1/4 x 5-3/4 13/16 677PAX138 6 – 11 4 x 8 13/16 1634



Brackets, Service MastHot Dip GalvanizedThe J0590 Service Mast Bracket is used with a service wedge clamp to attach theneutral wire of drop cable to the service mast. The front strap is rounded toprevent damaging the bail of the service wedge clamp.

This bracket clamps to 1-1/4-inch to 3-inch pipe. A specially designed slot on theend of the front strap permits installation of the bracket without removing thebolts, then captures the square carriage bolt shoulder to prevent it from turning orslipping out after installation. Approximate Shipping Weight


Brackets, Transformer TrainerHot Dip GalvanizedThese brackets are clamped to the bottom edge of the transformer tank to providean insulated support for the secondary leads. A polyethylene cap at the bolt endprotects the outside of the transformer from getting scratched. Each bracket isshipped complete with insulator.

Machine Bolt Size Insulator Approximate Shipping WeightCatalog No. (Inches) Catalog No. (Lbs. Per 100 Pcs.)J6765 1/2 x 6 J101 220J6765A 1/2 x 4-1/2 J100 130

PAX138



Brackets, Western Union WallHot Dip GalvanizedThe J2584 is the standard Type A Western Union Wall Bracket,used when leads from the pole reach the building at an angleor are carried around corners. It is attached with two No. 14wood screws. Fabricated from 3/16 x 1-1/4-inch material.

Approximate Shipping WeightCatalog No. (Lbs. Per 100 Pcs.)J2584 59

Clamps, Aerial Cable,Medium Duty 1Hot Dip GalvanizedFeatures:• 3-1/2” long curved clamping groove

to conform to sag of span.• Generously belled groove ends for

angles.• Built in 1-1/2” clearance from pole

face.• Tapped body for positive clamping

action.• Firm clamping action of neutral

eliminates slippage due tounbalanced span load such as servicetakeoff from one side of pole.

• Teeth or feet resists downslotting.

Dimensions (Inches) ApproximateMessenger Clearance WeightDiameter Pole To Mounting (Lbs. Per

Catalog No. Range Messenger Bolt 100 Pcs.)PA332 .22 - .63 1-1/2 5/8 232PA333 .43 - .75 1-1/2 5/8 224

PA332 & PA333

Clamps, Aerial, Mid SpanHot Dip Galvanized

PA342

Messenger Approximate WeightCatalog No. Diameter Range (Lbs. Per 100 Pcs.)PA342 .39 - .57 72



Clamps, Aerial Cable, Medium DutyHot Dip GalvanizedFeatures:

• 6-inch long curved clamping grooveto conform to sag of span.

• Generously belled groove ends forangles.

• Teeth on feet resists downslotting.• Smoothed area for stringing operation.• For attaching medium size cable and

triplex.• Special nut retaining feature around

body mounting bolt hole.

Dimensions (Inches) ApproximateMessenger Ground Clearance WeightDiameter Wire Pole To Clamping Mounting (Lbs. Per

Catalog No. Range Size Messenger Bolts Bolt 100 Pcs.)PA192A .310 - .500 #6 AWG 2-1/4 (2) 1/2 x 2 5/8 499

Clamps, Aerial Cable, Heavy DutyHot Dip GalvanizedFeatures:

• Features same as medium duty.• For attaching heavy cable on angle

and tangent runs.• Also for large angles with medium

cable.

Dimensions (Inches) ApproximateMessenger Ground Clearance WeightDiameter Wire Pole To Clamping Mounting (Lbs. Per

Catalog No. Range Size Messenger Bolts Bolt 100 Pcs.)PA178 .43 - .57 #6 AWG 3 (2) 5/8 x 2-1/2 3/4 778


Clamps, Aerial Cable, Light DutyHot Dip GalvanizedFeatures:

• Small economical clamp for light duty construction.• A stringing finger is included on the clamping plate.• The back of the clamp body is recessed to fit over nut.• A second nut secures the clamp plate and assures positive, independent clamping

action regardless of wood shrinkage.

Dimensions (Inches) ApproximateMessenger Ground Wire WeightDiameter Diameter Mounting (Lbs. Per

Catalog No. Range Range Bolt 100 Pcs.)PA166A .162 - .257 .162 - .257 5/8 46


Clamps, Aerial Cable, Medium DutyHot Dip GalvanizedFeatures:

• For attaching small aerial cable and triplex.• Tapped body for use with 5/8-inch diameter mounting bolt to assure

independent clamping action.• Universal clamping plate is 3 inches long and covers a broad messenger range.

Dimensions (Inches) ApproximateClearance Weight

Messenger Ground Wire Pole To (Lbs. PerCatalog No. Range Groove Size Messenger 100 Pcs.)PA197 .16 - .38 .16 - .25 1-1/2 182PA197A .37 - .50 .16 - .25 1-1/2 178

PA197 & PA197A

Clamps, Aerial Cable, Heavy Duty 1Hot Dip GalvanizedFeatures:

• For attaching medium to heavy dutycable on both angle and tangentconstruction.

• Two separate clamping plate boltsallow clamping action to beindependent of wood shrinkage.

Dimensions (Inches)Messenger Clearance Pole Clamping Mounting

Catalog No. Range To Messenger Bolts Bolts MaterialPA175C .430 - .630 2 (2) 5/8 – 2-1/2 3/4 Malleable



Clamps, Cable Suspension, CornerHot Dip GalvanizedThe PA288 clamp is designed to accommodate inside or outsideangles from 10 degrees to 35 degrees. Clamp groove ends aregenerously rounded to prevent damage to 1/4-inch bare orinsulated messenger installed at angles up to 35 degrees. Theinner, pole side clamp section is tapped to accept a 5/8-inchdiameter bolt and includes a curved surface with spurs topenetrate into the pole and provide a stable installation. Thedesign provides a 1-5/8-inch clearance from the surface ofthe pole to the cable and 3-3/4-inch clamping surface length.

Approximate Shipping WeightCatalog No. (Lbs. Per 100 Pcs.)PA288 144

Clamps, Cable Suspension, Corner AttachmentHot Dip GalvanizedCorner attachment clamps are used for angles of 35 degreesto 60 degrees. Accommodates 5/8-inch diameter polemounting bolt. The inner surface is curved with integralspurs for contact stability with the pole. The integralthimble eyes will accept deadending devices up to 1/2-inch diameter.

Overall Eye Center ApproximateClamp Length Spacing Shipping Weight

Catalog No. (Inches) (Inches) (Lbs. Per 100 Pcs.)P294 6 2-1/2 209

71/2”

63/8”


Clamps, Cable Suspension, Type CHot Dip GalvanizedThe PA422 incorporates serpentine grooves in the twomating clamp sections to provide superior holding strengthof insulated messenger wire. Can be used for tangentconstruction or angles to 30 degrees. Designed for use with.250 inch insulated figure 8 messenger. Clamps are suppliedwith two track bolt assemblies and a center mounting hole.


Clamps, Suspension, Cable Hanger(with Stringing Hook) 2Hot Dip GalvanizedThese clamps are used for tangent construction or angles to10 degrees. They accommodate the 1/4-inch insulatedmessenger of figure 8 cable. The hook is provided forstringing and safety.

The PA296X is used for heavier construction and has a clampgripping length of 3-1/4-inches. It will support cablethrough 200 pair, No. 19.


Catalog No. (Lbs. Per 100 Pcs.)PA296X 147

The PA292X is used on .109 inch to .134 inch bare orinsulated messenger wire in tangent construction or anglesto 35 degrees. The hook serves as a safety device and can beused in the stringing of the cable. The clamp sections andhook accommodate a 5/8-inch diameter pole mounting bolt.The clamp surface length is 1-3/4-inches.


Catalog No. (Lbs. Per 100 Pcs.)PA292X 57

Clamp Clamp Bolt Mounting Hole ApproximateLength Diameter Diameter Shipping Weight

Catalog No. (Inches) (Inches) (Inches) (Lbs. Per 100 Pcs.)PA422 6 5/8 11/16x15/16 258

PA296X

Clamps, Support, Type B ExtensionHot Dip GalvanizedType B clamp supports are designed to facilitate adding anadditional cable to the opposite side of the pole. The PA158is installed by loosening the existing 5/8-inch diametermachine bolt and slipping the clamp support over the headof the bolt. A 5/8-inch by 2-1/4-inch machine bolt and nutare included to secure a suspension clamp. For small insideangles, a 1/2-inch lag screw may be installed in the base forincreased stability.

Approximate Shipping WeightCatalog No. (Lbs. Per 100 Pcs.)PA158 180



Clamps, B-BeamHot Dip GalvanizedThe Joslyn J25911 B-Beam Clamp is used in conjunction with a 5/8” thimbleye boltin the application of deadending strand to I beams. A clamping screw allows theclamp to be positioned on the beam flange.


Clamps, B-Strand, GroundHot Dip GalvanizedJoslyn J7956 Clamps are used to bond the cable sheath to the messenger strand.The clamp body is made of 1-1/2 x 3/16-inch steel with an inside keeper riding onthe end of the bolt. The 1/2-inch bolt can be removed to place the clamp over themessenger wire.



Clamps, Cable Suspension, AngleHot Dip GalvanizedAngle Suspension Clamps have curved ends to prevent damage to the messengerstrand when turning small angles. All clamps firmly grip 1/4 to 7/16-inch diameterstrand. They are furnished with two track bolts and a center mounting hole.

Clamp Clamp Clamp Bolt Mounting Hole ApproximateWidth Length Diameter Diameter Shipping Weight

Catalog No. (Inches) (Inches) (Inches) (Inches) (Lbs. Per 100 Pcs.)J7901 1-11/16 5-3/4 1/2 13/16 208J7901A 1-11/16 5-3/4 1/2 11/16 210J7902B 2-3/16 6 5/8 13/16 385


Clamps, Bronze, BondingJoslyn’s Bronze Bonding Clamps are available cadmium plated and semi-cadmiumplated for a wide variety of jumper applications. The assembly consists of twoclamp sections and a 5/16 x 7/8-inch bronze hex washer head bolt. One clampsection is tapped to allow installation with a single wrench.

Clamps, Cable SuspensionHot Dip GalvanizedJoslyn Cable Suspension Clamps are used with through bolts, which serve as aclamping member, and are shaped to securely grip messenger wire to the pole. A nutand square washer is used between the clamp and the pole to provide proper spacing.

The J1095 is used for light cables and consists of the clamping members only. A5/8” through bolt tightens the clamp on the wire as well as to the pole.

The J1096 and J25088.1 three-bolt clamps are used for heavier cables and arefurnished with a 5/8” through bolt hole. The J25088.1 keeper plate is flat.

No. Clamp Bolt Clamp Mounting Hole Strand Approximateof Diameter Length Diameter Diameter Shipping Weight

Catalog No. Bolts (Inches) (Inches) (Inches) (Inches) (Lbs. Per 100 Pcs.)J1095 1 — 2-1/2 11/16 1/4 to 7/16 67J1096 3 1/2 5-3/4 11/16 x 15/16 1/4 to 7/16 180J25088.1 3 1/2 5-3/4 11/16 x 15/16 1/4 to 7/16 175

ONE-BOLT

THREE-BOLT

WeightCatalog No. Description Wire Range (Per 100 Pcs.)J8300 Plated bronze clamp with one bare bronze groove .162” - .398” 16J8301 Bronze clamp completely plated .162” - .398” 16

Clamps, Suspension, Cable Hanger(with Stringing Hook) 2Hot Dip GalvanizedThese clamps are used for tangent construction or angles to 10 degrees. They accommodate the 1/4-inch insulatedmessenger of figure 8 cable. The hook is provided forstringing and safety.

The J2235 has a clamp gripping length of 1-7/8-inches. It isdesigned for normal use and will support cable through 100pair, No. 19.

The PA296X is used for heavier construction and has a clampgripping length of 3-1/4-inches. It will support cable through200 pair, No. 19.

The J2245 has a 6-inch long clamp gripping length and issupplied with two clamp bolts for maximum holdingstrength in areas of adverse wind conditions or where longspans and heavier loads are required. It will support cablethrough 200 pair, No. 19.

Approximate Shipping WeightCatalog No. (Lbs. Per 100 Pcs.)J2235 172PA296X 147J2245 370



PA296X

J2245

J2245

J2235

Clamps, ConductorHot Dip GalvanizedThe J6478 Clamp is used for conductor loop deadends. Smooth, well-rounded insidesurfaces and belled ends prevent damage to the conductor.

Clamping sections are formed from 3/16-inch steel. The 1/2-inch bolts haveshoulders to prevent turning while tightening and come complete with lockwashersand square nuts.

Conductor ApproximateDiameter Range Shipping Weight

Catalog No. (Inches) (Lbs. Per 100 Pcs.)J6478 .146 - .414 104

A 5/8-inch bolt is mounted onpole with hook against pole.The square nut is tightened upagainst the hook and left in asquare position as shown. Add a minimum of 3 inches to polediameter to determine length of bolt.

After the cable is strung, thenut is loosened, and the keeperis turned around as shown. Thecable is then raised up so thatthe messenger can be grippedtightly in the groove of thehanger by tightening the nut.


Clamps, CrossoverHot Dip Galvanized

Joslyn Crossover Clamps For CATV or Telephone CablesJoslyn’s Crossover Clamps are used to clamp two messengers where they cross atright angles.

The J7930 Drop Forged Clamp sections are 1-1/2-inch wide and 3-1/4-inch long. Two1/2-inch diameter bolts have oval shoulders to prevent turning when tightening.

The J25564 Clamps are 1-1/2-inch wide and 3-1/2-inch long. Two 3/8-inch diametercarriage bolts and nuts are installed in the square holes of the clamp providing a“locking action”. Unique cable grooves with a center “dimple” provide superiorclamping action.

For Strand ApproximateDiameter Shipping Weight

Catalog No. (Inches) (Lbs. Per 100 Pcs.)J7930 1/4 to 3/8 154J25564 3/16 to 1/2 71


J25564

J7930

Clamps, Bonding/GroundingHot Dip GalvanizedThese grounding clamps are used to attach ground wires at the nut end of shieldwire supports as well as other bolts on transmission lines. Catalog number includestwo 1-1/2-inch long clamp sections and one square nut.

Mounting Ground ApproximateBolt Size Wire Size Shipping Weight

Catalog No. (Inches) (Inches) (Lbs. Per 100 Pcs.)J1163 5/8 3/16 to 3/8 50J1164 3/4 1/4 to 1/2 52

Clamps, Ground RodBronze Heavy Duty TypeJoslyn Bronze Ground Rod Clamps, used with copperbonded ground rods, provide alow resistance, secure copper-to-copper connection. These heavy-duty clampsdevelop a high-pressure contact between the rod and the grounding wire and canbe easily disconnected when it is desired to measure resistance of the ground.

Size of Grounding ApproximateCatalog No. with Rod Size Wires Accommodated Shipping WeightHex Head Bolt (Inches) By Clamp (Lbs. Per 100 Pcs.)J8490 3/8 6 – 14 AWG 7 – 9J8491 1/2 2 – 10 AWG 13 – 16J8492 5/8 1/0 – 8 AWG 15 –1 8J8493 3/4 1/0 – 8 AWG 23 – 26

CLAMP WITH HEX HEAD BOLT

Clamps, Ground RodHot Dip GalvanizedThis Ground Rod Clamp is madewith a 7/16-inch U-bolt and adrop forged clamping piece. It isused to clamp ground wire to 5/8and 3/4-inch rods.





Clamps, Ground RodHot Dip GalvanizedJoslyn Ground Rod Clamps are designed for heavy duty ground connections togalvanized ground rods. The clamp assembly consists of a stainless steel hex-headbolt and a hot dip galvanized clamp body.


Catalog No. Description Wire Range (Lbs. Per 100 Pcs.)J25932 5/8” Galv. Malleable Ground Rod Clamp #10 – #2 16J25985 3/4” Galv. Malleable Ground Rod Clamp #10 – 1/0 25

Clamps, GuyHot Dip GalvanizedJoslyn Guy Clamps are rolled from carbon steel with straight parallel grooves that will not damage guy strand. Offset guyclamps are designed to give increased holding strength. The clamping bolts have special shoulders to prevent turning when thenuts are tightened.

Bolt Clamp Clamp For Strand ApproximateNumber Diameter Length Width Diameter Shipping Weight

Catalog No. Of Bolts (Inches) (Inches) (Inches) (Inches) (Lbs. Per 100 Pcs.)Regular StyleJ1061 1 1/2 1-1/2 1-9/16 3/16 to 3/8 63J1030 2 1/2 3-3/8 1-9/16 3/16 to 3/8 126J929 3 1/2 4 1-9/16 3/16 to 7/16 160J930 3 1/2 6 1-9/16 3/16 to 7/16 224J931 3 5/8 6 1-21/32 5/16 to 1/2 256Offset StyleJ926 2 1/2 3-1/4 1-9/16 3/16 to 5/16 128J927 2 5/8 3-15/16 1-21/32 5/16 to 1/2 174

1-BOLT 2-BOLT 3-BOLT OFFSET



Clamps, Hot LineThe JS1500-series Hot Line Clamps are available in a wide variety of types for every contact combination. The high strengthbronze alloy eye screw, threads in a chamber filled with a corrosion-inhibiting compound. A completely enclosed compressionspring provides vibration resistant connections. Wide Bell-mouth jaws give maximum contact with all outside conductor strands.

Connection Type Run Tap ApproximateCasting Min.-Max. Min.-Max. Weight

Catalog No. Body Run Tap Diameter Diameter (Lbs. Per 100 Pcs.)1520 SERIESJS1520AA Aluminum AL AL .128 to .414 .128 to .414 40JS1520AC Aluminum AL CU .128 to .414 .128 to .414 44JS1520AGP Aluminum- Any Combination of .128 to .414 .128 to .414 42

Tin Plated AL – CUJP1520AGP* Aluminum- Any Combination of .128 to .414 .128 to .414 42

Tin Plated AL – CUJS1520CC Bronze CU CU .128 to .414 .128 to .414 69JS1520GP Bronze- Any Combination of .128 to .414 .128 to .414 67

Tin Plated AL - CUJP1520GP* Bronze- Any Combination of .128 to .414 .128 to .414 67

Tin Plated AL - CU* “JP” series clamps are individually packaged and include an oxide inhibitor on the jaws of the clamp.

1530 SERIESJS1530AA Aluminum AL AL .162 to .745 .162 to .547 68JS1530AC Aluminum AL CU .162 to .745 .162 to .547 72JS1530AGP Aluminum- Any Combination of .162 to .745. .162 to .547 66

Tin Plated AL-CUJP1530AGP* Aluminum- Any Combination of .162 to .745 .162 to .547 66

Tin Plated AL-CUJS1530CC Bronze CU CU .162 to .745 .162 to .547 126JS1530GP Bronze- Any Combination of .162 to .745 .162 to .547 126

Tin Plated AL-CUJP1530GP* Bronze- Any Combination of .162 to .745 .162 to .547 126

Tin Plated AL-CU* “JP” series clamps are individually packaged and include an oxide inhibitor on the jaws of the clamp.

Clamps, Static WireHot Dip GalvanizedStatic wire clamps are used to secure 1/4-inch to 7/16-inch static wire to bayonetassemblies.

The J5455 consists of two 2-1/2-inch long rolled steel clamp sections with thegroove ends belled out to prevent damage to the wire and one 1/2 x 2-1/2-inchmachine bolt for mounting.


Catalog No. Style (Lbs. Per 100 Pcs.)J5455 Clamp 94.0



J5455

Clevises, Deadend EyeletHot Dip GalvanizedEyelet Clevises are used under a bolt head or nut fordeadending suspension insulators. The J455 and J456 areboth furnished complete with a 5/8-inch diameterbuttonhead bolt and self-locking cotter pin.

For Mounting Ultimate ApproximateCatalog Steel Size Bolt Diameter Strength Shipping WeightNo. (Inches) (Inches) (Lbs.) (Lbs. Per 100 Pcs.)J455 1-1/2 x 3/16 5/8 12,000 98J456 2 x 1/4 3/4 20,050 176

J455 J456

Clevises, Heavy Strain InsulatorHot Dip GalvanizedJoslyn Heavy Strain Insulator Clevises are forged from 1/2-inch diameter steel witha 1/2-inch curved bolt complete with Anco locknut and are used with porcelainguy strain insulators. Minimum ultimate strength is 20,000 pounds.

Dimensions (Inches)For Use With Approximate

Insulator Shipping WeightCatalog No. A B Catalog No. (Lbs. Per 100 Pcs.)J732 5 2-1/2 L502, L504 and L506 146

Clamps, GuyHot Dip GalvanizedFeatures:

• Two keepers and clamp plate provide for strand separation.• Groove radius of plates ensures proper grip surface.

Dimensions (Inches)Strand Conductor U-Bolt Approximate Weight

Catalog No. Range Range Diameter (Lbs. Per 100 Pcs.)PAX65C 3/16 – 3/8 #6 – 2/0 3/8 61PAX67C 5/16 – 1/2 #1 – 4/0 1/2 133


Clevises, Insulated CrossarmHot Dip GalvanizedClevis mounting holes are for 5/8-inchbolts. Mounting holes are slotted topermit installation without removinginsulators.

Approximate Shipping WeightCatalog No. For Use with (Less Insulator)(Less Insulator) Insulator No. (Lbs. Per 100 Pcs.)J0342 J97, J101 or J151 152J0313 J100A or J150A 118


Clevises, InsulatedSecondary & Deadend

Hot Dip GalvanizedClevis mounting holes are for 5/8-inch bolts. Mounting holes are slotted to permit installation without removinginsulators.

The J1300 is designed to develop high strength on deadendsor line pulls. It has a mounting slot for one 5/8-inchmachine bolt and two staggered side holes for 1/2-inch lagscrews.

Approximate Shipping Weight

Catalog No. For Use with (Less Insulator)(Less Insulator) Insulator No. (Lbs. Per 100 Pcs.)J1300 J101, J151 or J0101 210

ApproximateWidth of Shipping Weight

Catalog No. For Use with Back (Less Insulator)(Less Insulator) Insulator No. (Inches) (Lbs. Per 100 Pcs.)J251 J97, J101 or J151 3-3/4 156

Clevises, WireholderHot Dip GalvanizedThe J075 Clevis Wireholder is used with either the J101 orJ151 spool insulator for attaching services where triplex-type cable is used. Insulator must be ordered separately.

J0342

J0313

J1300

J251

Approximate Shipping WeightCatalog No. (Less Insulator)(Less Insulator) (Lbs. Per 100 Pcs.)J075 136

Clevises, InsulatedSecondary & Deadend (continued)

The J252 and J255 Secondary Pulley Brackets are designed for use both as stringingpulleys and as secondary clevises, making them especially useful for stringing andsagging conductors.

The conductor is strung and sagged with the bracket in the pulley position where itcannot bind. The 90° slot in the base makes it possible to rotate the bracket intothe clevis position before or after the conductor is tied to the spool.

The J252 light-type has a metal tab which contains the insulator bolt. The cotterbolt of the J255 heavy duty-type threads into the bottom of the clevis, locking thespecial Twist-Lock head into a groove in the clevis top. Both features eliminate thecotter pin.

Approximate Shipping WeightCatalog No. For Use with Width of Back (Less Insulator)(Less Insulator) Insulator No. (Inches) (Lbs. Per 100 Pcs.)J252 J101 or J151 2-5/8 150J255 J0101, J101 or J151 3 256

The J250 has two sharp projections in the back to prevent itfrom twisting. The cotter bolt is held in position by meansof the same type of tab that is used on the J252.


Catalog No. For Use with (Less Insulator)(Less Insulator) Insulator No. (Lbs. Per 100 Pcs.)J250 J101 or J151 152


Catalog No. For Use with “A” Extension (Less Insulator)(Less Insulator) Insulator No. (Inches) (Lbs. Per 100 Pcs.)J1398 J101 or J151 3-1/2 240J1399 J101 or J151 4 254



J252

J255

J250

J1398/J1399

PULLEY POSITION CLEVIS POSITION


Clevises, InsulatedSecondary & Deadend (continued)

The J93 Clevis is formed from stiff, hot rolled channel,making it much heavier and stronger than similar bracketsmade of pressed steel channel.

The clevis features raised projections near the bolt mountingslot which assist in capturing the bolt head to resist turning.



The J093 Clevis has an 11/16-inch square hole for mountingwith either a 5/8-inch carriage or machine bolt.




J93

J093

Clevises, Insulated, SwingingHot Dip GalvanizedThe J0322 and J1614 are used with 5/8-inch or larger eyebolts or eyenuts giving aflexible mounting for equalizing strains at corners. The J1626 can be bolted tocrossarms to provide an insulated deadend assembly.

Approximate Shipping WeightCatalog No. For Use with (Less Insulator)(Less Insulator) Insulator No. (Lbs. Per 100 Pcs.)J0322 J0101, J101 or J151 160J1614 J100B or J150B 45J1626 J100B or J150B 95

J0322

J1626 J1614

Clevises, Pipe RiserHot Dip GalvanizedThe J0311 Pipe Riser Clevis is used for triplex cable installations on 2-1/2-inchstandard Pipe Risers.

Each Pipe Riser Clevis is furnished complete with two assembly bolts and one clevispin. Either the J101, J151 or J0101 insulator, ordered separately, can be used.

Approximate Shipping WeightCatalog No. Pipe Range (Less Insulator)(Less Insulator) (Inches) (Lbs. Per 100 Pcs.)J0311 2-1/2 400



J0311

Clevises, ThimbleHot Dip GalvanizedThese Thimble Clevises are used fordeadending conductors to suspensioninsulators. The wire groove diameter in the 9-gauge pressed steel clevis is 1-1/2-inches, and, in the drop forgedthimbleye clevis, 1-1/4-inches. Theywill fit the eyes of standard eyebolts upto and including 3/4-inch diameter.

Pin Diameter Ultimate Approximate Shipping WeightCatalog No. (Inches) Strength (Lbs.) (Lbs. Per 100 Pcs.)Pressed SteelJ554 1/2 10,000 97J555 5/8 10,000 101Drop ForgedJ0555 5/8 20,000 124

The J575 Thimble Clevis is furnished complete with a 5/8-inch closed wire ropethimble which permits the conductor to swing freely without wear.

Wire Groove Clevis Pin Ultimate ApproximateDiameter Opening Diameter Strength Shipping Weight

Catalog No. (Inches) (Inches) (Inches) (Lbs.) (Lbs. Per 100 Pcs.)J575 1-1/2 1 5/8 7,500 100

PRESSED STEEL J554 AND J555

FORGED STEEL J0555

J575


Clevises, ThimbleHot Dip Galvanized

Dimensions (Inches) Minimum WeightThimble Ultimate (Lbs. Per

Catalog No. A B C D E Diameter Strength 100 Pcs.)PA271 2-7/8 4-1/2 1-1/2 11/16 7/8 2-1/4 20,000 175PA272B 4 5-7/8 1-3/4 13/16 1 2-1/2 36,000 337


Clips, Guy, MalleableHot Dip GalvanizedA strong economical means of securing down guys and wire ropes. The steel U-boltand malleable iron base are both hot dip galvanized.

Strand Size WeightCatalog No. (Inches) (Per 100 Lbs.)J1048 1/4 14J1049 5/16 19J1050 3/8 30J1051 1/2 48J1052 5/8 60J1053 3/4 83

Connectors, Cast, Timber GridHot Dip GalvanizedTimber connectors resist slotting of the bolt hole in thetransfer of loads and connection of two wood members. The integral teeth penetrate into the wood to assist indistributing the load over a larger wood surface area thanthe bolt hole only.

Approximate

Dimensions (Inches)Weight

(Lbs. PerCatalog No. Outside Diameter Hole Diameter 100 Pcs.)PX156 2-1/2 11/16 40

PA271 &PA272B

EyeletsHot Dip GalvanizedEyelets, also known as Bolt Eyes, are used under the head or nut of a bolt. All arecompatible with the strength of the bolts used with them.

Straight thimble eyelets are used for span guys while angle thimble eyelets are usedfor down guys.

Standard eyelets are used for deadending.

Standard eyelets and straight thimble eyelets have a slotted hole for ease ininserting the bolt.

Straight Thimble EyeletsFor Bolt Maximum ApproximateDiameter Strand Size Shipping Weight

Catalog No. (Inches) (Inches) (Lbs. Per 100 Pcs.)J6550C 5/8 5/8 128J6551 3/4 5/8 124

Angle Thimble EyeletsFor Bolt Maximum ApproximateDiameter Strand Size Shipping Weight

Catalog No. (Inches) (Inches) (Lbs. Per 100 Pcs.)J6500 5/8 1/2 127

Standard EyeletsFor Bolt Slot

Dimensions (Inches)Approximate

Diameter Size Shipping WeightCatalog No. (Inches) (Inches) A B C D (Lbs. Per 100 Pcs.)J1126 5/8 11/16 x 1-1/8 1-1/4 3 1/2 2-1/4 78J1127 3/4 13/16 x 1-1/8 1-1/4 3 1/2 2-1/4 69



STRAIGHT THIMBLEYELETS

ANGLE THIMBLEYELETS

STANDARD EYELETS


Eyenuts, ForgedHot Dip GalvanizedJoslyn Forged Eyenuts are tapped to fit hot dip galvanized bolts made to ANSISpecifications and are designed to develop strength ratings consistent with thebolts with which they are used.

Thimble eyenuts are used for span, head and stub guying; twin eyenutsaccommodate double guys. Oval eyenuts are used for deadending with suspensionor strain insulators.

Thimble EyenutsFor Bolt Maximum ApproximateDiameter Strand Size Shipping Weight

Catalog No. (Inches) (Inches) (Lbs. Per 100 Pcs.)J6510 5/8 1/2 91J6511 3/4 1/2 91J16512 1 5/8 170

Twin EyenutsFor Bolt Maximum ApproximateDiameter Strand Size Shipping Weight

Catalog No. (Inches) (Inches) (Lbs. Per 100 Pcs.)J6515 5/8 5/8 177J6516 3/4 5/8 176

Oval EyenutsFor Bolt Maximum ApproximateDiameter Strand Size Shipping Weight

Catalog No. (Inches) (Inches) (Lbs. Per 100 Pcs.)J1092 5/8 — 54J1093 3/4 — 53


THIMBLEYENUT® TWINEYENUT®

OVAL EYENUT

Fittings, Cast, InsulatorBall Clevis 1Hot Dip Galvanized

Dimensions (Inches) Ultimate PackedCatalog Strength Wt./100 ANSINo. A B C D E (Lbs.) (Lbs.) Class13200 2-7/8 13/16 1-1/2 5/8 1-9/16 30,000 89 52.3/513201 3-15/16 7/8 1-1/2 5/8 2-1/2 30,000 120 52.3/5

Fittings, Cast, InsulatorBall Hook 1Hot Dip Galvanized

Dimensions (Inches)Ultimate PackedStrength Wt./100 ANSI

Catalog No. A B C D E F G H I J (Lbs.) (Lbs.) Class13400 3-1/8 7/8 3-1/8 29/32 1-3/8 11/16 1 1 3/4 1-1/4 30,000 112 52.3/5



Fittings, Cast, InsulatorBall Eye 1Hot Dip Galvanized

Dimensions (Inches)Ultimate Packed

Catalog Strength Wt./100 ANSINo. A B C D E F (Lbs.) (Lbs.) Class13000 3-1/2 1 2-3/8 11/16 2 23/32 30,000 94 52.3/5

Fittings, Cast, InsulatorClevis EyeHot Dip Galvanized


Catalog Strength Wt./100No. A B C D E F G H (Lbs.) (Lbs.)33220-1/2 2-3/4 1/2 1-5/8 11/16 1-15/16 13/16 5/8 1-3/4 30,000 10533220-5/8 2-3/4 5/8 1-5/8 11/16 1-15/16 13/16 5/8 1-3/4 30,000 110


Fittings, Cast, InsulatorY Clevis Eye 1Hot Dip Galvanized

Dimensions (Inches)Ultimate PackedStrength Wt./100

Catalog No. Fig. A B C D E F (Lbs.) (Lbs.)33400-5/8 1 3-7/8 5/8 1-5/8 11/16 1-1/2 3/4 30,000 21033440-5/8 2 3-7/8 5/8 1-5/8 11/16 1-1/2 3/4 30,000 204


Fittings, Cast, InsulatorSocket Eye 1Hot Dip Galvanized

Dimensions (Inches)Ultimate PackedStrength Wgt./100 ANSI

Catalog No. A B C D (Lbs.) (Lbs.) Class33000-1/2 2-1/4 1/2 1-1/2 11/16 16,000 125 52.3/5

Fittings, Cast, InsulatorClevis-Clevis 1Hot Dip Galvanized

Dimensions (Inches)Ultimate PackedStrength Wgt./100

Catalog No. Fig. A B C D E F G H (Lbs.) (Lbs.)33100 1 3-1/2 1-9/16 1-9/16 13/16 13/16 5/8 5/8 1-3/4 30,000 19833102 2 3-5/8 1-9/16 1-9/16 13/16 — 3/4 5/8 1-3/4 30,000 342



Fittings, Cast, InsulatorSocket Clevis 1Hot Dip Galvanized


Catalog Strength Wgt./100 ANSINo. Fig. A B C D E (Lbs.) (Lbs.) Class33300 1 2-5/8 13/16 1-3/4 5/8 1-11/16 30,000 208 52.3/533301 2 2-5/8 13/16 1-3/4 5/8 1-11/16 30,000 196 52.3/533302 3 4-1/2 13/16 1-3/4 5/8 2 30,000 270 52.3/5

Fig. 1

Fig. 2


Fittings, Cast, InsulatorSocket Y Clevis 1Hot Dip Galvanized


Catalog Strength Wgt./100 ANSINo. Fig. A B C D E (Lbs.) (Lbs.) Class33303 1 3-1/8 — 2 3/4 1-3/4 30,000 281 52.3/533304 2 3-1/8 — 2 3/4 1-3/4 30,000 274 52.3/5


Fittings, Insulator — Hot Line FittingsHot Dip Galvanized

Dimensions (Inches)Ultimate PackedStrength Wgt./100 ANSI

Catalog No. A B C D E F G (Lbs.) (Lbs.) Class13500 9-3/4 13/16 1-5/8 5/8 1-1/2 7/8 23/32 30,000 246 52.3/513505 9-3/4 1 1-3/4 5/8 1-7/8 7/8 — 30,000 391 52.3/5BT3090 9-3/4 1-1/2 1-3/4 — — — — 30,000 260 52.3/5

BT3090 13500 13505

Fittings, Insulator, Distribution Strain ClampSnail Shell DesignHot Dip Galvanized

The BT2111 Snail Shell Strain Clamp ismade of cast malleable iron and the J-bolt keeper from drop forged steel.Ferrous parts are hot dip galvanized.

Cable DiameterApproximate

Ultimate Weight Per 100Catalog No. Fitting Min. Max. Strength (Lbs.) BoxedBT2111 None .156 .375 8,000 170



Fittings, Insulator, Anchor Shackles 1Hot Dip Galvanized

Dimensions (Inches) Ultimate Strength Approximate WeightCatalog No. A B C D E F G (Lbs.) (Lbs.)BT3022 2-3/16 1/2 7/8 5/8 1-3/8 1/2 11/16 25,000 0.74BT3022BNK 30,000 0.86BT3024 2-3/4 1/2 3/4 5/8 1-3/8 1/2 5/8 25,000 0.80BT3024BNK 30,000 0.92BT3009 2-3/4 9/16 7/8 5/8 1-1/2 9/16 11/16 30,000 1.12BT3009BNK 35,000 1.22BT3023 2-3/4 5/8 1-1/16 3/4 1-11/16 5/8 3/4 35,000 1.47BT3023BNK 40,000 1.66BT3025 3-1/2 7/8 7/8 3/4 1-7/8 3/4 3/4 50,000 2.25BT3025BNK 60,000 2.44


Fittings, Sidewalk GuyHot Dip GalvanizedThese cast iron fittings are used with standard pipe nearsidewalks and buildings where there is insufficient space forstandard guying and where head clearance must be maintained.

The J1501 pole plate is mounted with one 5/8-inch bolt andtwo 1/2-inch lag screws. The J1502 end fitting clamps thestrand.

The J0521 pole plate has four 9/16-inch holes for mountingwith lag screws. The J0522 end fitting requires a J931 guyclamp which must be ordered separately. The 5/8 x 2-1/4-inchtrack bolt replaces one of ‘outer’ bolts of the J931 guy clamp.

ApproximateCatalog Pipe Size Shipping WeightNo. Description (Inches) (Lbs. Per 100 Pcs.)J1501 Pole Plate 2 380J1502 Clamp End Fitting 2 521J0521 Pole Plate 2 & 2-1/2 495J0522 Clamp Bolt End Fitting 2 & 2-1/2 350


J1502 J1501

J0522 J0521

Gains, Curved GridHot Dip GalvanizedCast grid gains provide increasedstability and eliminate the need togain the pole. Bolt hole slotting is alsoreduced by distributing the load over alarge wood surface.

Dimensions (Inches)Approximate

WeightCatalog Pole Dia. (Lbs. PerNo. A B C D Range 100 Pcs.)PX122 4 4 15/16 3/4 6-12 127PX124-5A 4 5-5/16 13/16 1 6-11 228PX124-5B 4 5-5/16 15/16 1 6-11 228PX125A 5-1/4 7 11/16 1 10-16 257PX125B 5-1/4 7 15/16 1 10-16 250PX261 6-3/4 4 15/16 9/16 9-15 127

Gains, CrossarmHot Dip Galvanized

Dimensions (Inches) ApproximatePole Crossarm Weight

Catalog No. Fig. A B C D Range Range (Lbs. Per 100 Pcs.)PX251TS 1 5-3/8 4 13/16” x 1-5/8” (EX) 5/16 6 – 11 4 – 7 200PX252 1 4 3 13/16” x 1” 1/4 6 – 10 3-1/2 – 5-1/2 76PX254F 1 4 4 13/16” x 1-3/4” 5/16 6 – 10 3-1/2 – 5-1/2 136PX262 2 6-3/4 4 15/16 1/4 9 – 15 6 – 11 129PX262B* 2 6-3/4 4 15/16 1/4 9 – 15 6 – 11 131

*Includes riveted stainless steel bonding clip.

(EX) Includes external (non-enclosed) slot.



Fig. 1 Fig. 2


Gains, Braceless CrossarmHot Dip GalvanizedBraceless crossarm gains improve the stability of the crossarm and eliminate theneed for crossarm braces and pole gaining. The design improves the structureappearance and permits the use of wood, steel channel or steel tubular arms. Theyaccommodate pole diameters from 6 inches to 12 inches. Pole mounting slots are13/16 inch wide on the top slot and 11/16 inch on bottom slot.

Dimensions (Inches) ApproximateC Crossarm Weight

Catalog No. Fig. A B Slot Range D E F Range (Lbs. Per 100 Pcs.)PX171 1 4 11 7-1/4” 10 12 9/16 x 1-1/2 3-1/2 – 8 717PX182A 2 4 7-1/2 4-1/4” to 6” 10 12 9/16 x 1-1/2 3-1/2 – 6-1/2 480PX182B 2 4 7-1/2 4-1/4” to 6” 10 12 11/16 Hole 3-1/2 – 6-1/2 485


Fig. 1Fig. 2

Gains, Crossarm (With Shelf)Hot Dip Galvanized

Dimensions (Inches) ApproximatePole Dia. Weight

Catalog No. Fig. A B C D E F Range (Lbs. Per 100 Pcs.)PX249G 1 9-1/2 4 1 6-1/2 4-1/2 4 8 – 12 470PX249SG 1 13-1/8 4 1-1/16* 10-1/8 5-3/8 6-1/2 8 – 12 1000PX249AG 1 13-1/8 4 1-1/16 10-1/8 5-3/8 6-1/2 8 – 12 1000PX187 2 7-1/4 4 1-3/4 3/4 5-7/8 1-3/8 8 – 12 290

*2” long slot replaces top two mounting holes.



Fig. 1 Fig. 2


Guards, Cable, PlasticJoslyn plastic U cable guards offer a strong, lightweight,maintenance-free means of cable protection. The non-conducting, plastic guards are designed to nest over theJoslyn one-piece galvanized cable guard as required by manyconstruction standards which call for a galvanized guard atthe base and a plastic guard up the balance of the pole. Theplastic guards may be cut to length in the field.


Gains, PoleHot Dip GalvanizedPole gains enhance the stability of thecrossarm and pole interface. They areused where it is not possible ordesirable to cut a gain in the pole.

NEOPRENE HEX HEAD LAG SCREW WITHWASHERHEAD NAIL NEOPRENE BACKED STEEL WASHER

Plastic Cable Guards (Gray)

Dimensions Weight EachCatalog No. (I.D. x Length) (Lbs.)PGU-210 2” x 10’ 6.0

Joslyn plastic U cable guards may be mounted withfurnished 1-1/2-inch x 10 ga. Neoprene washerhead nails or optional 1/4-inch x 2-inch hex head lag screw withneoprene backed steel washer. See lag screw catalog page.



Guards, Cable, SteelHot Dip GalvanizedCable Guards are used to protect power and telephone cable at riser installations.They offer maximum protection to cable against collisions and vandalism.

Cable Guards are available either in inexpensive strap-mounted style or in one-piecetype with integral mounting holes for ease of installation. Lag screws are used tosecure to the pole.

Guards without frustrum can be used as extensions to attain any desired height onthe pole. A carriage bolt assembly is furnished on style “C” to fasten extensionsand to serve as a ground lead attachment.

Strap Mounted Guards

Straps

Steel For Guard Mounting Hole ApproximateSize Width Diameter Shipping Weight

Catalog No. (Inches) (Inches) (Inches) (Lbs. Per 100 Pcs.)J995 1/8 x 3/4 1-1/8 9/32 19.1J994 1/8 x 3/4 1-1/4 9/32 20.4J996 1/8 x 3/4 2-3/16 9/32 31.0J997 3/16 x 1 3-3/16 11/32 69.3

One-Piece Guards

Steel D W ApproximateGauge Length Depth Width Shipping Weight

Catalog No. Style B.W. (Feet) (Inches) (Inches) (Lbs. Per 100 Pcs.)J23083.8 D 14 8 2-3/16 2-3/16 1650J23084.8 D 14 8 3-5/16 3-1/4 2550



STRAP

STYLE D

Steel D W Required ApproximateGauge Length Depth Width Mounting Shipping Weight

Catalog No. Style B.W. (Feet) (Inches) (Inches) Strap (Lbs. Per 100 Pcs.)J985 A 14 5 1-1/8 1-1/8 J995 470J984 A 14 8 1-1/8 1-1/8 J995 700J991 B 14 8 1-5/16 1-1/4 J994 900J987 A 14 8 2-3/16 2-3/16 J996 1340J989 A 14 8 3-3/16 3-3/16 J997 2000J23395.8 C 14 8 3-3/16 3-3/16 J997 1800

STYLE A STYLE B

STYLE C


Guards, Tapered Guy, SteelHot Dip GalvanizedFull Round Guards are provided with U-bolt clamps at bothends. The bottom fitting clamps directly to the guy rod. Aslot near the base of the guard easily engages the tongue of the fitting. Then, the swivel type top clamp is installedwithout removing the nuts.

Half Round Guards come with either a hook or clamp at thetop. The curved jaws of the heavy gauge steel hook tightenfirmly on 1/4 to 9/16-inch strand as the guard is broughtdown into position. Two holes are available in the top clamptype, the lower of which is used on short sweep guys. Sevenholes in the lower portion of both styles allow for properpositioning of the bottom clamp to the strand.


ApproximateLength Shipping Weight

Catalog No. (Feet) Style (Lbs. Per 100 Pcs.)J1448 8 Half Round, Top Hook 950J1528 8 Half Round, Top Clamp 913J1618 8 Full Round 1350

TOP CLAMP

TOP HOOK DETAIL

TOP CLAMP DETAIL

HALF ROUND STYLE

FULL ROUND STYLE

BOTTOM CLAMP BOTTOM CLAMP DETAILCUTAWAY SIDE VIEW OFBOTTOM FITTING INSTALLED

ON GUY ROD

Guards, Guy, PlasticJoslyn plastic guy guards provide a strong, highly visible, economical safeguardfrom exposed guy wires and anchor rods. They are produced from high-density,impact-resistant polyethylene or PVC with ultraviolet stabilizers added for colorretention.

Full Round Guard With Galvanized ClampThe 2-inch diameter full round design permits complete coverage of the guy wireand anchor rod for maximum protection and improved visibility. The guards areproduced from high impact resistant polyethylene which is ultraviolet stabilized forlong life and resistance to fading. A 3-inch long partial cutout is located at oneend to facilitate installation of the galvanized bolted clamp assembly. This clampassembly provides a secure metal to metal connection to guy wire sizes 3/16-inchthrough 1/2-inch diameter. The other end of the guard is secured around the guywire by hand insertion of the one way, spiked plastic rivet.

2-Inch Diameter Polyethylene – Full Round

Catalog No. Description Weight Each (Lbs.)J1493Y 8 Ft. Yellow 2.4

Two-Thirds Round GuardThe 2-1/2-inch diameter, two-thirds round design provides excellent visibility andpermits installation over anchor rods up to 1-1/4-inch diameter. The guards areproduced from high impact resistant PVC with ultraviolet stabilizers added forretention of color under U.V. conditions. Four sets of holes are located along theguard to permit flexibility of mounting positions. Two different attachmentmethods are available—bolted clamp assemblies or wire ties. The bolted clampguards are supplied with three galvanized clamp assemblies which enable tamperresistant attachment to guy wire diameters 3/16-inch through 1/2-inch and toanchor rods up to 1-1/4-inch diameter. The wire tie guards are supplied with threewire ties for a fast, low cost method of guard attachment.

2-1/2-Inch Diameter PVC – Two Thirds Round

Catalog No. Description Attachment Method Weight Each (Lbs.)J1491G 8 Ft. Gray 3 Bolted Clamps 2.7J1491Y 8 Ft. Yellow 3 Bolted Clamps 2.7J1498Y 8 Ft. Yellow 3 Wire Ties 1.9




Guards, Guy, Plastic, Helical Pigtail FastenerJoslyn full round Helical Pigtail Guards provide an eco-nomical, quick and easy installation without the need forany installation tools. These guards utilize a 23-inch long,helically formed polyethylene pigtail which is wrappedaround the guy strand to provide an efficient tool-freeinstallation to guy strand sizes 3/16-inch through 1/2-inch.One end of the helical pigtail is secured to the guy guardbody with a marine grade aluminum rivet positioned 5 feetabove the bottom of the guard. The bottom of the guardincludes a one-way locking nylon strap for additionalinstallation security and resistance to unauthorized removal.

1-1/4 Inch Diameter PVC – Full Round

Catalog No. Description Weight Each (Lbs.)J5518 8 Ft. Yellow 1.3

1-1/4 Inch Diameter Polyethylene – Full Round

Catalog No. Description Weight Each (Lbs.)J5718 8 Ft. Yellow 1.3


Guards, Ground Wire Molding, PlasticJoslyn plastic ground wire molding provides strong, reliableprotection of exposed ground wire. Available in 1/2-inch and1-inch sizes, the plastic molding features low maintenance,safety, handling ease and low cost. Joslyn plastic groundwire molding is easily secured to the pole with availablediamond point staples or square shank, barbed staples.

Plastic Ground Wire Molding (Gray)

Weight PerCatalog No. Description 1000 Feet (Lbs.)PM128 1/2” x 8’ Molding 50PM18 1” x 8’ Molding 95

Hangers, MessengerHot Dip GalvanizedThe J1070 Cable Messenger Hanger ishot formed from 1/2 x 2-inch openhearth steel with a specially curvedgroove which permits its use on corners as well as on straight runs. Two 1/2-inch high carbon steel trackbolts clamp the strand.

Mounting holes are 9/16 and 11/16-inch in diameter for a 1/2-inch lag screw and 5/8-inchthrough bolt.




HooksGalvanizedJoslyn produces a complete line of hooks for supportingbail-type drop wire and deadend clamps from poles andcrossarms. The J3316P and J3318 drive hooks have rolledfetter drive threads and a pilot point for easy starting. TheJ8245, complete with square nut, bolts through the side of awood crossarm for deadending telephone services.


Catalog No. Size (Inches) (Lbs. Per 100 Pcs.)J3316P 7/16 x 4-3/4 F.D. 27.0J3318 5/16 x 3-1/2 F.D. 11.6J8245 1/2 x 5-3/4 42.0

J8245 J3318

J3316P


Hooks, Placing, Type BHot Dip GalvanizedThe type B placing hook is used as a stringing tool tofacilitate the installation of figure 8 cable. The hollow baseof the hook permits installation over the nut and washer ofthe thru bolt. The horizontal slot of the hook allows thehook to be removed for re-use after the cable is secured tothe cable suspension clamp and thru bolt. If additionalsafety factors are required, the hook can remain installedbetween the pole and the cable suspension clamp.

Mounting Bolt WeightCatalog No. Size (Inches) (Lbs. Per 100 Pcs.)P338 5/8 215


Hooks, GuyHot Dip GalvanizedTwo J1019 guy hooks are normally mounted on opposite sides of a pole under twoturns of guy strand to prevent the strand from slipping on the pole. The roundedside of the 1-3/4 x 3/8-inch half oval steel prevents damage to the guy strand andits galvanized coating.


Holders, Guy Strand CoilThe Guy Strand Holder offers a neat, economical, fieldproven means of handling guy strand safely. Reducesaccidents from “exploding” guy strand coils and speeds upconstruction through orderly handling. Once the guy strandhas been placed in the holder it is firmly contained and,consequently, cannot get out of control. Thus the hazard tolinemen and passing traffic is eliminated.

Economies result from the facility with which the strand canbe unreeled from the holder—it is paid out from the centerin the same manner as rope from the inside of a coil; andfrom its mobility—it can be mounted on a bracket on theside of a line truck or readily carried from the truck to thejob. In either case, the strand will pay out satisfactorilywithout requiring further attention at the holder. The strandwill uncoil only while it is being pulled. In addition to theguy strand, the holder is a convenient fixture for handlingother types of coiled wire.

Maximum Size of Approximate WeightCatalog No. Coil Accommodated (Lbs. Per 100 Pcs.)PAX80 6-1/2” x 30” 1290

Irons, Pulling-InHot Dip GalvanizedPulling-In Irons are set into the concrete or brick walls of street vaults opposite allduct entrances to provide a strong, convenient attachment for pulling-in blocks forinstalling or removing cables. Made of 7/8-inch diameter steel, they are designed tostraddle one brick.

Dimensions (Inches) Approximate Shipping WeightCatalog No. A B (Lbs. Per 100 Pcs.)J8119 8-3/8 9 490J8120 11 13-5/16 600



Insulators, SpoolPorcelain


Stock No. Type of Insulator Bolt Size (Inches) (Lbs. Each)J100 Dry Process Type A 1/2, Type B 3/8 0.44J150 Wet Process Type A 1/2, Type B 3/8 0.44J101 Dry Process 5/8 1.16J151 Wet Process 5/8 1.20J0613 Wet Process 5/8 2.72J0101 Wet Process 5/8 2.56

Horizon Glaze (light gray) is standard color.

J100 AND J150 J0101 (CLASS 53-4) J101 AND J151**(CLASS 53-2)

J0613 (CLASS 53-5)


Insulators, Guy StrainPorcelain

Catalog Number L502 L504 L506ANSI Class 54-1 54-2 54-3Typical System Voltage 2.2 4.4 6.6Dimensions

Maximum Cable Size, in. 3/8 1/2 5/8Dimension A, in. 3-1/2 4-1/4 5-1/2

B, in. 2-5/8 3-1/4 4-5/16C, in. 5/8 7/8 1D, in. 2-1/2 2-7/8 3-3/8E, in. 1-3/4 2-1/8 2-3/8

Mechanical ValuesRated Ultimate Strength, lbs. 10000 12000 20000

Maximum Recommended Working Load, lbs. 5000 6000 10000Electrical Values

Low Frequency Dry Flashover, kV 25 30 35Low Frequency Wet Flashover, kV 12 15 18

Approximate Shipping Weight, lbs. each 1.2 1.7 2.9


L500 SERIES

Ladders, ManholeHot Dip GalvanizedJoslyn manhole ladders permit safe, easy access to underground equipment. AllJoslyn ladders are furnished with skid resistant rungs. Each rung is coarselyknurled to assure a safe and sturdy foothold for climbing. Galvanized hookedladders are also available.

Skid-Resistant RungsThe rung is knurled by a rolling process which circumferentially covers the 5/8-inch diameter rungs with flattened pyramidal points. The grooves betweenthese points provide a path for water and mud to escape from the surface of therungs thus providing a self-cleaning, skid-resistant surface under both wet and dry conditions. The flattened points minimize possible injury if the rungs aregrasped with unprotected hands.

Galvanized Hooked Ladders

Length Approximate(L) Shipping Weight

Catalog No. (Feet) (Lbs. Per 100 Pcs.)JCA6758.H065 6-1/2 3400JCA6758.H08 8 4000JCA6758.H10 10 5100JCA6758.H12 12 6200JCA6758.H14 14 10400

Galvanized Straight Ladders

Length Approximate(L) Shipping Weight

Catalog No. (Feet) (Lbs. Per 100 Pcs.)JCA6758.S065 6-1/2 3200JCA6758.S08 8 3900JCA6758.S10 10 4900JCA6758.S12 12 5800JCA6758.S14 14 10200JCA6758.S16 16 12000JCA6758.S18 18 13500




Links, Cable ReinforcingHot Dip GalvanizedThe J7929 Reinforcing Link is used on each side of the cablesuspension clamp to relieve side strains at corners in theline. It is fastened to the pole with a 1/2-inch lag screwthrough the double eye.

Steel ApproximateBell Diameter Length Shipping Weight

Catalog No. Catalog No. (Inches) (Inches) (Lbs. Per 100 Pcs.)J7929 JCA3943.L 1/2 8-3/8 118


Links, ExtensionHot Dip GalvanizedThese Extension Links are used at deadends and cornerstructures to set the insulator string out from the pole orcrossarm to provide more climbing space.

Each link is made from two pieces of 1-1/2 x 3/16-inch steelthat are fabricated, galvanized and then riveted together witha stainless steel rivet. Riveting after galvanizing assures thatthere is zinc between the two pieces of steel for maximumcorrosion resistance. The assembly has a 3/4-inch clevisopening with 5/8-inch diameter bolt and self-locking cotter.The eye end has an 11/16-inch hole.

Hole Center to ApproximateBolt Center Shipping Weight

Catalog No. Dimension (Inches) (Lbs. Per 100 Pcs.)J6657 10 208J6658 14 278J6659 20 376

LinksHot Dip GalvanizedThe PA319 provides a 14-inch clearance from the pole orcrossarm to the insulator string at deadend installations.

Dimensions (Inches)

ApproximateUltimate WeightStrength (Lbs. Per

Catalog No. A B C D E (Lbs.) 100 Pcs.)PA319 14 5/8 11/16 11/16 1/2 15,000 193

Links, ForgedHot Dip GalvanizedJoslyn Forged Links are used asconnecting units with suspensioninsulators and many types ofsuspension hardware and fittings. BTseries links are produced from highstrength, low alloy steel to developimproved resistance to wear.

Dimensions (Inches)Ultimate ApproximateStrength Shipping Weight

Catalog No. A B C (Lbs.) (Lbs. Per 100 Pcs.)J7751 1/2 2-1/4 1 20,000 42J7754 5/8 3-1/4 1 25,000 97BT3080 1/2 2-1/4 1 30,000 42BT3082 5/8 3-1/4 1 40,000 9716100F 3/4 3-1/2 1-1/8 60,000 130BT3085 — — — 30,000 79BT3086 — — — 30,000 79



Luminaire Supports – SteelHot Dip Galvanized1-1/4” Curved Upsweep

DimensionsNominal Horizontal Rise

Length (Ft.) (Inches) WeightCatalog No. A B (Lbs. Each)J728003 2-1/2 8 9.0J728004 4 14 15.0J728006 6 22 17.0

1-1/4” Straight Upsweep


Length (Ft.) (Inches ) WeightCatalog No. A B (Lbs. Each)J741003 2-1/2 13-1/2 7.0J741006 6 24-1/2 15.0

BT3085 Double Eye Link, 90° BT 3086 Double Eye Link

J728 Series

J741 Series


Luminaire Supports – Steel (continued)

Hot Dip Galvanized

1-1/4” Underbraced Curved Upsweep


Length (Ft.) (Inches ) WeightCatalog No. A B (Lbs. Each)J729008 8 26 26.0

(LS-004)

1-1/4” Straight Upsweep with Top Strap

DimensionsNominal Pole Attachment

Horizontal Rise CentersLength (Ft.) (Inches) (Inches) Weight

Catalog No. A B C (Lbs. Each)J742006 6 17 12-1/4 20.0J742008 8 23 12-1/4 24.0

1-1/4” Straight Upsweep with 1 Tie Rod



Catalog No. A B C D (Lbs. Each)J761008 8 30 10 6-5/8 24.0J761010 10 35 12 8-5/8 29.0J761012 12 42 12 8-5/8 34.0

1-1/4” Straight Upsweep with 2 Tie Rods


Length (Ft.) (Inches ) WeightCatalog No. A B (Lbs. Each)J762010 10 32 38.0J762012 12 38 42.0J762014 14 44 48.0J762016 16 50 55.0


J729 SERIES

J742 SERIES

J761 SERIES

J762 SERIES

Luminaire Supports – Steel (continued)

Hot Dip Galvanized1-1/4” A-Frame with 1 Tie Rod



Catalog No. A B C (Lbs. Each)J743010 10 39 18 39.0J743012 12 46 20 45.0J743014 14 51 22 52.0J743016 16 56 24 62.0J743018 18 61 26 71.0J743020 20 66 28 85.0

2” Straight Upsweep

DimensionsNominal

Horizontal RiseLength (Ft.) (Inches) Weight

Catalog No. A B (Lbs. Each)J751006 6 22 21.0J751008 8 28 27.0Catalog No. Length (Ft.) (Inches) (Lbs. Each)

2” Curved Upsweep with 2 Tie Rods



Catalog No. A B C (Lbs. Each)J769010 10 26 28 50.0J769012 12 26 28 54.0

2” Straight Upsweep – Slipfitter StyleWeight

Catalog No. (Lbs. Each)J26490 25.0



J743 SERIES

J751 SERIES

J769 SERIES

J26490


Luminaire Floodlight Supports – SteelHot Dip Galvanized2” Floodlight Support For Wood Poles

WeightCatalog No. (Lbs. Each)J26200 13.5


J26200

Luminaire Security Light Supports – SteelHot Dip Galvanized2” x 30” Security Light Support

WeightCatalog No. (Lbs. Each)J25594 12.0

Luminaire Supports – Grounding Lug AssemblyHot Dip GalvanizedThe J771018 grounding lug assembly consists of a 3/8 x 1-1/4” carriage bolt, complete with wire clamp, springlockwasher and square nut. All components are hot dipgalvanized.

WeightCatalog No. (Lbs. Per 100 Pcs.)J771018 12.2

Mounts, Triple Transformer (Rack Type)Hot Dip GalvanizedJoslyn has designed its J6865 and J6866 one-piece tripletransformer racks to make installation easier by makingthem lighter. These one-piece transformer racks can beassembled with transformers on the ground and then hoistedas a unit into position for mounting on the pole.

The J6866 rack can be used to mount three transformersranging from 75 kVA through 333kVA (24” mounting holespacing). Each position is designed to accommodate ANSItype “B” lug spacing. Six 3/4-inch x 2-1/2-inch machinebolts are included for bolting the transformer to the rack. Itis recommended the rack be fastened to the pole with two3/4-inch machine bolts and four 1/2-inch lag screws. Holesare provided on the rack for a groundwire lug.

The J6865 rack has 12” lug centers for mounting three, 3kVAthrough 50kVA transformers. Six 5/8-inch x 1-3/4-inchmachine bolts are included for bolting the transformer to therack. It is secured to the pole with two 3/4-inch machine boltsand two 1/2-inch lag screws to prevent the installation fromwobbling in the wind. Holes are provided for a groundwire lug.

Approximate Shipping WeightCatalog No. (Lbs. Per 100 Pcs.)J6865 38J6866 91



J6866 J6865


Mounts, Cast, TransformerHot Dip GalvanizedThese cast transformer mounts feature a locking slot for a3/4” diameter pole mounting bolt. The mounts can beinstalled on the transformer prior to installation of theassembly on the pole. They are furnished with two 5/8”diameter bolts, nuts and washers for attachment to thetransformer. Accommodates maximum 4000 lbs. transformerweight.

Lug Spacing Approximate WeightCatalog No. Range (Lbs. Per 100 Pcs.)PAT4 7” – 14” 1810


National Telephone SupplyCompany Products 1The “Nicopress” trademark refers toproducts designed and manufactured bythe National Telephone Supply Co.Nicopress sleeves utilize thecompression method and should beconsidered when requirements call foran economical method of splicing anddead-ending communications andpower conductors. Nicopress installingtools, which are also available, aredesigned to quickly and easilycompress the appropriate Nicopresssleeve. Nicopress sleeves may also becompressed with installing tools ofother manufacturers.

Splicing SleevesNicopress Splicing Sleeves are used tosplice a wide range of conductors whichinclude copper, copper covered steel,Copperweld copper, galvanized steeland Amerductor. Each sleeve is markedwith catalog number, conductor sizeand installation tool groove.

Splicing Sleeves for Solid Copper Conductor

Tool Length WeightCatalog No. Conductor Size AWG Groove (Inches) (Lbs. Per 100 Pcs.)3-045B 17,18,19 B 1-1/8 0.33-064B 14 B 1-1/8 0.31-080C 12 C 1-1/2 1.21-102J 10 J 2-1/2 5.21-114J 9 J 2-1/2 5.11-128E 8 E 1-1/2 1.61-128J 8 J 2 3.91-128M 8 M 3 9.01-162J 6 J 2-1/4 3.51-162M 6 M 2-1/4 5.61-162/7J 5 J 2-1/4 3.51-204M 4 M 2-3/4 6.41-204P 4 P 2-3/4 8.21-229P 3 P 3 8.51-258T 2 T 3 10.81-258X 2 X 3 14.61-289X 1 X 3 13.01-289/7E8 1/0 E8 5 22.41-325/7F6 2/0 F6 7-1/4 48.31-365/7G3 3/0 G3 7-1/4 57.91-410/7G9 4/0 G3 7-1/4 70.5

SPLICING SLEEVES

National Telephone Supply Company Products (continued)

Splicing Sleeves for Stranded Copper Conductor

Tool Length WeightCatalog No. Conductor Size AWG Groove (Inches) (Lbs. Per 100 Pcs.)1-3/102P 3 NO. 10 P 3 8.71-3/128X 3 NO. 8 X 3 15.01-3/162E8 3 NO.6 E8 5 21.31-128J 8 (7 WIRE) J 2 3.51-162/7J 6 (7 WIRE) J 2-1/4 3.51-204M 6 (3 WIRE) M 2-3/4 6.41-204P 6 (3 WIRE) P 2-3/4 8.21-204/7M 4 (7 WIRE) M 2-3/4 5.91-204/7P 4 (7 WIRE) P 2-3/4 8.31-258T 4 (3 WIRE) T 3 10.81-258X 4 (3 WIRE) X 3 14.61-3/128X 3 (7 WIRE) X 3 15.01-289X 3 (3 WIRE) X 3 13.01-258/7T 2 (7 WIRE) T 3-1/4 11.21-258/7X 2 (7 WIRE) X 3 12.61-258/3X 2 (3 WIRE), 1 (7,19 WIRE) X 3-3/4 15.21-289/7E8 1 (7,19 WIRE) E8 5 22.41-325/7F6 1/0 (7 WIRE) F6 7-1/4 48.31-365/7G3 2/0 (7,19 WIRE) G3 7-1/4 57.91-410/7G9 3/0 (7,19 WIRE) G9 7-1/4 70.51-460/7H5 4/0 (7,19 WIRE) H5 7-1/4 81.3

Splicing Sleeves for Solid Copperweld Conductor

Tool Length WeightCatalog No. Conductor Size AWG Groove (Inches) (Lbs. Per 100 Pcs.)1-102J 10 J 2-1/2 5.21-114J 9 J 2-1/2 5.13-128J 8 J 2-3/4 5.31-128M 8 M 3 9.01-128P 8 P 3-1/2 15.41-162P 6 P 3 11.51-204X 4 X 4-1/2 24.3

Splicing Sleeves for Stranded Copperweld Conductor

Tool Length WeightCatalog No. Conductor Size AWG Groove (Inches) (Lbs. Per 100 Pcs.)1-3/081P 3 NO. 12 P 3-1/4 13.21-3/102P 3 NO. 10 P 5-1/2 16.51-3/102X 3 NO. 10 X 4-1/2 24.91-3/114X 3 NO. 9 X 4-1/2 22.03-3/128E8 3 NO. 8 E8 5 28.83-7/114G3 3 NO. 6 G3 6-1/2 65.9






Splicing Sleeves for Copperweld Composite Conductor

Tool Length WeightCatalog No. Conductor Size AWG Groove (Inches) (Lbs. Per 100 Pcs.)1-8A-P 8A P 5 17.81-6A-P 6A P 5-1/2 17.31-4A-X 4A X 5-3/4 26.93-2A-F6 2A F6 7 41.31-3/081P 8C P 3-1/4 13.21-6A-P 6C P 5-1/2 17.31-3/081P 9-1/2D P 3-1/4 13.23-8D-P P P 4-3/4 16.0

Splicing Sleeves for Copperweld Composite Conductor

Tool Length WeightCatalog No. Conductor Size AWG Groove (Inches) (Lbs. Per 100 Pcs.)AL6SOL-J 6 J 2-1/2 1.3AL4SOL-M 4 M 2-3/4 1.9AL4SOL-P 4 P 2-3/4 2.6AL4SOL-X 4 X 2-3/4 4.1AL2SOL-X 2 X 3-1/4 4.4

Splicing Sleeves for Stranded All Aluminum Conductor

Tool Length WeightCatalog No. Conductor Size AWG Groove (Inches) (Lbs. Per 100 Pcs.)AL6STR-J 6 J 2-1/2 1.4AL4STR-M 4 M 3-1/4 3.4AL4STR-P 4 P 2-3/4 32.5AL4STR-X 4 X 2-3/4 5.1AL2STR-X 2 X 3-1/4 5.4

Splicing Sleeves for ACSR and AAAC Stranded Conductor

Tool Length WeightCatalog No. Conductor Size AWG Groove (Inches) (Lbs. Per 100 Pcs.)661M 6 (6/1) M 9 8.4661P 6 (6/1) P 9 10.4467ORANGE 4 (6/1, 7/1) ORANGE 14 27.2267PLUM 2 (6/1, 7/1) PLUM 16 46.51061PLUM 1/0 (6/1) PLUM 16-1/2 43.3


Splicing Sleeves – Partial Tension for ACSR Conductor

Tool Length WeightCatalog No. Conductor Size AWG Groove (Inches) (Lbs. Per 100 Pcs.)1706P 6 (6/1) P 3-1/4 4.01704P 4 (6/1, 7/1) P 3-1/4 3.61702X 2 (6/1) X 3-1/4 5.4

Reducing Sleeves for Solid Copper and Copperweld

Conductor Size AWG Tool Length WeightCatalog No. From—To Groove (Inches) (Lbs. Per 100 Pcs.)1-162X080J 6AWG—12AWG J 1-3/4 3.41-162X128J 6AWG—8AWG J 2 3.61-162X128P 6AWG—8AWG P 3-1/2 13.51-204X162P 4AWG—6AWG P 3 10.41-258X204X 2AWG—4AWG X 2-1/2 12.2

Repair Sleeves (Split Type)Nicopress Repair Sleeves (split type) are for use on strandedconductors where some of the strands are damaged or broken.The installation restores the strength and conductivity ofthe conductor and the split feature eliminates any necessityof cutting and resplicing the line. The repair sleeve is alsoused as a seat for hot-line clamps.

Split Repair Sleeves for Copperweld and Copper Composite

Tool Length WeightCatalog No. Conductor Size AWG Groove (Inches) (Lbs. Per 100 Pcs.)R1-8A-P 8A P 4 13.5R1-6A-P 6A P 4 12.0R1-4A-X 4A X 5-3/4 26.3

Split Repair Sleeves for ACSR and AAAC

Tool Length WeightCatalog No. Conductor Size AWG Groove (Inches) (Lbs. Per 100 Pcs.)AR4-3ORANGE 4 (6/1, 7/1) ORANGE 12 20.0AR2-1PEACH 2 (6/1, 7/1) PEACH 12 23.1AR2-1PLUM 2 (6/1, 7/1) PLUM 12 26.5AR1/0PLUM 1/0 (6/1) PLUM 12 27.2AR2/0-74A 2/0 (6/1) 74AS 12 40.0AR3/0-75A 3/0 (6/1) 75AS 12 61.0AR4/0-75A 4/0 (6/1) 75AS 12 55.0



REPAIR SLEEVES (SPLIT TYPE)



Nicotaps

Nicotaps are used principally in the communication field for making line anddrop wire taps. The Nicotaps have a split section which permits installationwithout cutting the line wire. The connection is permanent and insures a trouble-free wire.


Nicotap Sleeves for Solid Copper and Copperweld

Conductor Size AWG Tool Length WeightCatalog No. Line—Tap Groove (Inches) (Lbs. Per 100 Pcs.)T1-064C 14—14 C 2-3/4 2.3T1-080C 12—12 C 2-3/4 2.1T1-102X064D 10—14 D 2-3/4 2.7T1-102D 10—10 D 2-3/4 2.5T1-128J 8—8 J 3 6.0T1-162X102J 6—10 J 3 6.4T1-162X114J 6—9 J 3 5.6T1-162X128J 6—8 J 3 6.3T1-162J 6—6 J 3 5.3T1-204X162P 4—6 P 3-1/2 12.8T1-204P 4—4 P 3-1/2 12.0

NICOTAPS

Nicopress ToolsNo. 31 Tool is used principally for the splicing ofcommunication sizes of line wire.

Available in two groove combination in compression groovesC, D, E and J. Popular groove combinations are DC, DJ andCJ. Also available in EJ, DE and CE groove combinations.

WeightCatalog No. Tool Grooves (Lbs. Per 100 Pcs.)31-CJ C, J 22031-DC C, D 22031-DJ D, J 22031-EJ E, J 220

The 51-Orange, 51-Peach and 51-Plum must be used whensplicing ACSR with separate core and cover sleeves. Singlesleeves for ACSR can be compressed in the front groove ofthe above tools, but the No. 55-Plum-Orange tool is recom-mended for single sleeve because of its broader coverage.

The No. 53-XPJ Tool is a 3-groove tool. This tool willaccommodate any Nicopress item with a stock numberending in X, P or J.

The No. 55-Plum: Orange Tool applies to single splicingsleeves for smaller distribution sizes of ACSR, all aluminumand AAAC conductors.

WeightCatalog No. Tool Grooves (Lbs. Per 100 Pcs.)51-ORANGE ORANGE 64051-PEACH PEACH 64051-PLUM PLUM 65053-XMJ J, M, X 48053-XPJ J, P, X 48055-PLUM: ORANGE PLUM, ORANGE 490NO. 31

NO. 53-XPJ

National Telephone Supply CompanyProducts (continued)

Cable Rings and SaddlesCable Rings are designed to snap onto messenger strand tosupport heavy electrical and telephone cable. The rings areavailable in standard lengths for single cable and extra longfor suspending multiple cables. Cable Ring Saddles are alsoavailable where design and loading factors require their use.Cable Rings and Saddles are available in various materialsincluding: galvanized steel, stainless steel and coppercovered steel. Contact Joslyn for catalog numbers based onyour size and material requirements.



CABLE RING SADDLES CABLE RINGS

Nails, Pole DatingGalvanized

Dimensions (Inches) WeightCatalog No. (Length x Round Shank x Round Head) (Lbs. Per 100 Pcs.)2004 POLE DATING NAIL 2-1/2 x 3/16 x 1/2 2.2

Nails, SteelGalvanized

Catalog No. Size Length (Inches)J803 3D 1-1/4J804 4D 1-1/2J806 6D 2J808 8D 2-1/2J810 10D 3J816 16D 3-1/2J820 20D 4J830 30D 4-1/2

Nuts, Concave LocknutsHot Dip GalvanizedThe concave locknut is a free-spinning,square or hexagon locknut that startsfreely from either side, and spins intoplace with the fingers. One-half to afull turn with a wrench locks itsecurely.

When the arched surface contacts thetop of the common nut or bearingsurface, wrenching flattens the arch,deflecting the nut threads from theirtrue helix and causing them to firmlygrip the bolt threads. The nut takes apermanent set and must be wrenchedfor further movement.

WeightCatalog No. Description (Per 100 Pcs.)J8581 3/8” Square 1.3J8582 1/2” Square 2.4J8583 5/8” Square 4.2J8584 3/4” Square 5.4J8584-1/2 7/8” Square 8.1J8585 1” Square 10.6J8582H 1/2” Hex 1.9J8583H 5/8” Hex 3.6J8584H 3/4” Hex 4.7

SQUARE LOCKNUT

HEXAGON LOCKNUT

0044


Nuts, SquareGalvanizedSquare nuts have always been considered safest to use by utility linemen becauseof their large wrenching surface. Regular nuts are used on all types of threadedbolts and insulator pins, while heavy nuts are used exclusively on anchor rods.

Joslyn square nuts are manufactured in accordance with American NationalStandards Institute Specifications B18.2.2 and tapped Unified National CoarseThread Series Class 2B after centrifugal hot dip galvanizing, oversize for galvanizedbolts and rods.


Regular (for bolts only)Nominal Size Bolt Approximate

And Shipping WeightCatalog No. Threads Per Inch (Lbs. Per 100 Pcs.)J8561 3/8 – 16 2.2J8562 1/2 - 13 5.4J8563 5/8 – 11 10.2J8564 3/4 - 10 13.8J8564-1/2 7/8 – 9 24.3

Heavy (for anchor rods only)Nominal Anchor ApproximateRod Diameter Shipping Weight

Catalog No. (Inches) (Lbs. Per 100 Pcs.)J8563-1 5/8 12.2J8564-1 3/4 20.8J8565-1 1 50.0J8566 1-1/4 100.0

Nuts, WasherHot Dip GalvanizedJoslyn Washer nuts combine a square nut and large round washer in a static-proof,one-piece, resistance welded washer/nut design. Two 7/32-inch holes are providedin the design to accommodate nails which will resist loosening of the washer nutdue to vibration.

Nominal Dimensions (Inches) Approximate Shipping WeightCatalog No. Thread Size B C (Lbs. Per 100 Pcs.)J9802 5/8 2-1/2 1 29J9803 3/4 3 1-1/8 49

RESISTANCE WELDED

➞ C ➞

➞

Pins, Nylon Alloy Thread TypeJoslyn Z-series, insulator pins were developed to addressenvironmental concerns associated with the manufacture,handling, and disposal of lead thread pins. Insulator threadsfor Z-series pins are produced from an advanced J.E.M.

(Joslyn Engineered Material) nylon alloy compound. TheJ.E.M. material is a special nylon alloy blend to assureproper electrical and mechanical performance. The threadsare flexible, yet more resilient than lead, offering superiorinsulator fit and conductor groove alignment. Joslyn nylonalloy thread type pins are available for 1-inch and 1-3/8-inch pin type insulator thread sizes.

Joslyn Z-series pins exceed the performance requirements ofANSI C135.22 specifications for lead thread pins. In additionto the ANSI requirements, Joslyn Z-series pins have beensubjected to an extensive battery of tests to assure long-termperformance in severe service conditions. The additionaltests include: horizontal fatigue; aeolian vibration; corona;ultraviolet; and cold temperature impact.

Pins, Lead Thread TypeJoslyn lead threads are available for 1-inch and 1-3/8-inchpin type insulator thread sizes. The lead threads are tightlybonded to forged crossarm pins and formed steel pole toppins through a process of casting the lead-antimony alloydirectly to the pin. A raised ring of lead at the top of thethread minimizes strains from developing when the insulatoris tightened.

The threads comply to ANSI standards for dimensional andperformance requirements.

The lead threads on the pins are shipped with an assembledcardboard protective sleeve to prevent damage to the threadsduring transit and handling.




Pins, CrossarmForged SteelMHot Dip Galvanized with Nylon Alloy or Lead Insulator ThreadsJoslyn Crossarm Pins are forged in one piece from open hearth steel. Large basesdistribute loads without crushing flat wood crossarms. A square wrenching shoulderis provided above the base for rotating the insulator groove into position.

These pins have 1-inch ANSI standard nylon alloy or cast lead threads for lowvoltage insulators. Long shank pins come complete with a square washer, squarenut and concave locknut. Short shank pins for steel crossarms are furnished with asquare nut and split coil lockwasher.

Pins with a “Z” suffix in the catalog number are furnished with insulator threadsproduced from an advanced J.E.M. (Joslyn Engineered Material) nylon alloycompound.


Long Shank

A TCatalog No. S Height B Minimum D Weight

(with Catalog No. Shank Above Shank Thread Base Washer (Lbs. Per

Nylon Alloy (with Lead Diameter Arm Length Length Diameter Dimensions 100 Pcs.)

Threads) Threads) (Inches) (Inches) (Inches) (Inches) (Inches) (Sq. Inches) Nylon Lead

J203Z — 5/8 5 5-3/4 4 2 2 138 —

J204Z J204 5/8 5 6-1/2 4 2 2 144 167

J2802Z J2802 5/8 5 8 4 2 1-3/4 (round) 157 180

J206Z — 5/8 6 5-3/4 2-3/4 2 2 147 —

J207Z — 5/8 6 6-1/2 3 2 2 151 —

J211Z J211 3/4 6 6-1/2 3-1/4 2 2-1/4 232 266

J211CDN.1Z J211CDN.1 3/4 6 6-1/2 3-1/4 2 2-1/4 232 255

— J22267 3/4 6 8 3-1/4 2 2-1/4 — 276

Short Shank

A TCatalog No. S Height B Minimum D Weight

(with Catalog No. Shank Above Shank Thread Base (Lbs. Per

Nylon Alloy (with Lead Diameter Arm Length Length Diameter 100 Pcs.)

Threads) Threads) (Inches) (Inches) (Inches) (Inches) (Inches) Nylon Lead

J221Z J221 5/8 5 1-1/2 1-3/8 2 102 132

J222Z J222 5/8 6 2-1/2 2-3/8 2 104 134

J224Z J224 3/4 6 1-3/4 1-5/8 2 160 180SHORT SHANK PINS

LONG SHANK PINS

Pins, High Voltage — Forged SteelHot Dip Galvanized with Nylon Alloy or Lead Insulator ThreadsThe following pins are all one-piece forgings, with ANSIstandard nylon alloy or cast lead threads designed for theheavy loading of high voltage pins.



Long ShankFor Insulators with Standard 1” Threaded Pin Hole (ANSI Class 55-6)

Catalog No. S A B D Weight(with Catalog No. Shank Height Shank Base Washer (Lbs. Per

Nylon Alloy (with Lead Diameter Above Arm Length Diameter Dimensions 100 Pcs.)Threads) Threads) (Inches) (Inches) (Inches) (Inches) (Sq. Inches) Nylon Lead

— J625 5/8 5 6-1/2 2-3/4 2 — 202J626Z — 5/8 6 6-1/2 2-3/4 2 194 —J24626Z — 5/8 8 5-3/4 3 2 336 —J606Z J606 3/4 6 6-1/2 2-3/4 2-1/4 246 274J607Z J607 3/4 7 6-1/2 2-3/4 2-1/4 260 288

Short ShankFor Insulators with Standard 1” Threaded Pin Hole (ANSI Class 55-6)



— J629 3/4 7 1-3/8 2-3/4 — — 210

Standard Duty Long ShankFor Insulators with Standard 1-3/8” Threaded Pin Hole (ANSI Class 55-7)



J647Z — 5/8 7 7 3 2-1/4 302 —J608Z — 3/4 8 7 3 3 482 —

Standard Duty Short ShankFor Insulators with Standard 1-3/8” Threaded Pin Hole (ANSI Class 55-7)



— J631 3/4 8 1-5/8 3 — — 380— J635-DC 3/4 12 1-5/8 3 — — 584

Heavy Duty Long ShankFor Insulators with Standard 1-3/8” Threaded Pin Hole (ANSI Class 55-7)



— J658 3/4 8 7 3-1/2 3 — 564— J610 3/4 10 7 3-1/2 3 — 614— J612 3/4 12 7 3-1/2 3 — 676

LONG SHANK STEELPINS WITH 1” INSUL. THREAD

STANDARD DUTY LONGSHANK STEEL PINS WITH1-3/8” INSUL. THREAD

SHORT SHANKSTEEL PINS WITH1” INSUL. THREAD

Short shank pins are for use on steel crossarms while longshank pins are for wood crossarms. Pins with a “Z” suffix inthe catalog number are furnished with insulator threadsproduced from an advanced J.E.M. (Joslyn EngineeredMaterial) nylon alloy compound.

STANDARD DUTY SHORTSHANK STEEL PINS WITH1-3/8” INSUL. THREAD

HEAVY DUTY LONGSHANK STEEL PINS WITH1-3/8” INSUL. THREAD


Pins, Pole TopHot Dip Galvanized with Nylon Alloy or Lead Insulator Threads


J2010 & J2011

Pressed Steel – Straight BaseJoslyn pressed steel pole top pins with nylon alloy or cast lead insulator threadsare mounted against the pole by 5/8-inch bolts. The lower hole is slotted 11/16 x1-1/4-inch on both two and three hole styles.

Catalog No.Dimensions Weight(with Catalog No. L

(Inches)Insulator

(Lbs. Per 100 Pcs.)Nylon Alloy (with Lead Length ThreadThreads) Threads) (Inches) S B H (Inches) Nylon Lead

J715Z J715 15 5 (2-hole) 9 1 232 260J1368ZSL* — 18 5 3 9 1 280J1368Z J1368 18 5 3 9 1 283 310J744Z — 24 5 3 15 1 450 —J720Z J720 20 8 (2-hole) 11 1-3/8 327 355J740Z J740 20 8 (2-hole) 11 1 320 347J1220Z — 20 5 3 11 1 314 —J26876Z — 20 5 3 11 1-3/8 310 —

*Lower slot is open (non-enclosed).

Flared Base – Closed/Folded NeckThe lower end of these pins is flattened and flared to give a solid bearing surfacewhen mounted with the flange against the pole. The 24-inch long pins are reinforcedby a channel welded into the back which gives a rigid box section and greatlyincreased strength. Holes are for 5/8-inch mounting bolts.


(Inches)Insulator


— J2008SES 18 5 3 9 1 — 323— J2010 24 8 (2-hole) 15 1 — 530— J2011 24 8 (2-hole) 15 1-3/8 — 590

Flared Base – Semi-Closed/Folded Neck


(Inches)Insulator


J2008Z — 18 5 3 9 1 280 —J2008-XZ — 18 5 3 9 1 280 —

J2008SES

J2008Z J2008-XZ

Pins, Pole Top (continued)

Hot Dip Galvanized with Nylon Alloy or Lead Insulator Threads



Flared Base – Open Lower Slot

Catalog No. Weight(with Catalog No. (Lbs. Per

Nylon Alloy (with Lead Dimensions (Inches) 100 Pcs.)Threads) Threads) L A B C D E F Nylon Lead

J26945Z J26661 24 8 1-9/16 11/16 11/16 1 1-3/4 450 430J26947Z J26662 24 8 1-9/16 11/16 11/16 1-3/8 2-1/8 450 450J26946Z J26761 24 8 1-9/16 13/16 13/16 1 1-3/4 450 430J26948Z J26762 24 8 1-9/16 13/16 13/16 1-3/8 2-1/8 450 450— J26838 30 8 1-9/16 11/16 11/16 1 1-3/4 — 630

Pins, Offset Pole TopHot Dip Galvanized with Lead Insulator ThreadsJoslyn pressed steel Offset Pole Top Pins are designed for usein double span construction on 25kV systems. They providethe necessary clearance between insulators at a reduction inthe cost of assemblies using straight pole top pins, doublearming brackets and pipe spacers.

Joslyn Offset Pole Top Pins are manufactured from 3/16-inchrolled carbon structural steel. Standard ANSI 1-3/8-inch leadthreads.

Hole Lead ApproximateLength Dimensions Thread Shipping Weight

Catalog No. (Inches) (Inches) (Inches) (Lbs. Per 100 Pcs.)J25179 22 8 1-3/8 600

Pins, Angle Pole TopHot Dip GalvanizedThe P403 and P403W pole top pin bracket is formed on a 30° angle and includesintegral spikes for stability for angle construction.

Ultimate Approximate

Dimensions (Inches)Load Weight

Lead Strength (Lbs. PerCatalog No. A B C D E Thread (Lbs.) 100 Pcs.)P403 11/16 (Keyhole) 8 24 18-1/2 11/16 x 1-1/8 1 2400 1090P403W 11/16 5 22 16-3/4 11/16 x 1-1/4 1 2400 900

P403 P403W

P403 P403W


Pins, Pole Top, 45° AngleHot Dip GalvanizedAngle Pole Top Pins are designed to be mounted on side of the pole top for angleconstruction applications. They are furnished with 1-inch lead insulator threadsand withstand angle loads to 2250 pounds

“S” Slot Width “H” Hole Diameter A WeightCatalog No. (Inches) (Inches) (Inches) (Lbs. Per 100 Pcs.)J26837 11/16 11/16 16 863J26930 13/16 13/16 6 863J26944 13/16 13/16 8 863


Pins, Wide Base ClampHot Dip Galvanized with Lead Insulator ThreadsJoslyn Wide Base Clamp Pins are made of open hearth steel, forged in one piece.The broad base distributes the load without cutting into the crossarm while theformed saddle combined with the clamp assembly or strap insures that the pin willnot twist or slip once it is mounted to the crossarm. Cast lead threads are ANSIstandard. Vertical clamp pins can be used for either straight line or cornerconstruction.

The J3322 and J3324 pins are furnished complete with two 5/8 x 7-inch carriagebolts and a spiked clamping plate.

Lead For Height ApproximateThread Size Crossarm Size Above Arm Shipping Weight

Catalog No. (Inches) (Inches) (Inches) (Lbs. Per 100 Pcs.)J3322 1 3-3/4 x 4-3/4 6 620J3324 1-3/8 3-3/4 x 4-3/4 7 700

J3322J3324

A

Pins, SteelHot Dip Galvanized with Nylon Alloy Insulator ThreadsThese Western Union standard type forged pins aremanufactured with 1-inch diameter nylon alloy insulatorthreads. The nylon alloy threads replace the obsolete woodcobs. The pins, forged from carbon steel, have a 1/2-inchdiameter shank.

Shank Height ApproximateLength Above Shipping Weight

Catalog No. (Inches) Arm (Lbs. Per 100 Pcs.)J1190Z 5 4-1/4 64



J1190Z

Pins, Angle CrossarmThe P400 series angle pin brackets can be used for angle construction on crossarmsor mounted on the side of poles. Mounting is accomplished with a 5/8-inchdiameter machine bolt. The curved base with integral teeth assist in resistingmovement.

Catalog No. Catalog No. Approximate Weight(with Nylon (with Dimensions (Inches) Insulator (Lbs. Per 100 Pcs.)Alloy Threads) Lead Threads) A B C Thread Dia. Nylon LeadP400Z P400 6 4-1/8 4 1 320 325PA400Z PA400 6 4-1/8 4 1 453 458PA401AZ PA401A 8 4-1/2 4 1-3/8 595 600P402Z P402 8 4-1/2 4 1 536 541

“PA” catalog series includes 5/8” x 8” machine bolt, square nut and square flat washer.

P400 SERIES


Pins, Corner Crossarm—Lead ThreadsHot Dip Galvanized with Lead Insulator ThreadThe J215 corner pin is designed for use on slight angles onrural lines. It has a 1-inch ANSI standard cast lead thead.

The pin is made from forged carbon steel, reinforced with awelded brace. A spike protrudes on the lower side of theplate to prevent the pin from twisting on the arm.



Catalog No. Angle (Lbs. Per 100 Pcs.)J215 22.5° 336

J215

Pins, Transformer LeadHot Dip Galvanized with Nylon Alloy or Lead Insulator ThreadsThis pin is used for carrying the leads to the transformer. It has a cast lead threadfor insulators with ANSI standard 1-inch threaded pin holes. The body is a forgingwith a 1/2” diameter gimlet style thread.

ApproximateCatalog No. Catalog No. Height Shipping Weight(with Nylon (with Lead Above Arm (Lbs. Per 100 Pcs.)Alloy Threads) Threads) (Inches) Nylon LeadJ025Z J025 5 94 99

Pins, Transformer LeadHot Dip Galvanized with Lead Insulator ThreadsThese Transformer Lead Adapter Pins have cast lead threads for ANSI standard pin-type insulators. They are turned onto the end of a 5/8-inch bolt.

Lead Thread Size Approximate Shipping WeightCatalog No. (Inches) (Lbs. Per 100 Pcs.)J2840 1 81J2841 1-3/8 150



Pins, Thimble Adapters with Lead ThreadsThe J4023 Thimble Adapter is made bycasting a standard 1-3/8-inch leadthread on a standard 1-inch thimble,making is possible to use insulatorswith 1-3/8-inch threaded pin holes onpins with 1-inch lead threads.

Approximate Shipping Weight


Pin, Hole AdaptersHot Dip GalvanizedJoslyn Pin Hole Adapters or centering washers are used with 5/8-inch or 3/4-inchdiameter shank steel pins on wood crossarms drilled with 1-1/2-inch holes forwood pins. The adapter top is placed in the top of the pin hole and is held in placeby a circular rim at the top. The bottom adapter is placed in the bottom of the pinhole to center the pin shank and provide a firm bearing surface for the nut.

For Outside ApproximatePin Diameter Thickness Shipping Weight

Catalog No. Type Diameter (Inches) (Inches) (Lbs. Per 100 Pcs.)J3225 Top 5/8 1-11/16 1-1/16 31.5J800 Bottom 5/8 2-3/4 5/8 37.5P140 Bottom 5/8 2-3/4 5/8 37.5P140A Bottom 3/4 2-3/4 5/8 37.5

J3225

J800, P140and P140A

Plates, Lift, For Thimbleye BoltsHot Dip GalvanizedLift Plates are recommended for use behind the eyes of anglethimbleye bolts with lag screws to increase load capacityeither where loads are excessive or guys are steep. The platedistributes the load over a greater surface area, protectingthe wood pole against shear damage.

Number For Bolt Diameter Thickness Approximate Shipping WeightCatalog No. of Holes (Inches) (Inches) (Lbs. Per 100 Pcs.)J7886 3 5/8 1/4 128J7890 3 3/4 1/4 126

All plates measure 2-1/2-inch x 7-inch, curved on a 3-inchradius. Plates for 5/8-inch eyebolts have 11/16-inch roundholes, and plates for 3/4-inch eyebolts have 7/8 x 1-inchoval holes. Screw holes are 9/16-inch diameter for 1/2-inchlags.

3-HOLE PLATE


Plates, Double ArmingHot Dip GalvanizedThese plates are used on top of the arms in double arming construction formounting short shank insulator pins and deadending. Slotted holes allow mountingon a wide range of crossarm centers, which vary with different pole diameters.

The J1600 extends beyond the arms and has clipped corners to permit attachingfittings at any angle. Holes are 13/16-inch and slots are 13/16 x 3-5/16-inch for3/4-inch mounting bolts.

Steel Size Approximate Shipping WeightCatalog No. (Inches) (Lbs. Per 100 Pcs.)J1600 4 x 1/2 x 24 1270


Plates, Pole Butt GroundingCopperJoslyn Pole Butt Grounding Plates are installed on the bottom of utility poles toprovide a secure positive ground by connecting the butt plate to the pole ground wire.

Joslyn J9196 Copper Butt Plates are furnished with an integral copper terminal lugand screw which will accommodate copper ground wire from #14 solid to #4 stranded.

Plate Size Approximate Shipping WeightCatalog No. (Inches) (Lbs. Per 100 Pcs.)J9196 7 x 7-1/2 52

J9196(COPPER)

Plates, Cast, Pole BearingHot Dip GalvanizedGreater pole stability for H-frame transmission structures is made possible by usingthese pole bearing plates. They are attached to the bottom of the poles to increasethe resistance of uplift and settling of the pole. Each plate provides 90 squareinches of additional bearing surface to the soil. The plate’s pole mounting surfaceincorporates integral spikes to resist movement. Mounting is accomplished with a7/8 inch diameter bolt.

Bottom Plate Approximate WeightCatalog No. Dimensions (Lbs. Per 100 Pcs.)P325B-122 6-1/2” x 14-1/8” 1200

Plates, StrainHot Dip GalvanizedJ1034 Strain Plates are used with J1019 guy hooks to provide a bearing surface forthe strand, preventing damage to the wood fibers of the pole. Two to four platesare required per pole depending on its diameter. The plate is 4-inch x 8-inch x 14gauge, curved on a 5-inch radius, with four 3/16-inch diameter nail holes.

The J6577 is a combination of a half oval guy hook firmly welded to a J1034 strainplate. It is normally attached with a 5/8-inch bolt and four nails. Two extra 7/16-inch diameter holes are provided for 3/8-inch lag screws to give additional support.

Approximate Shipping WeightCatalog No. (Lbs. Per 100 Pcs.)J1034 86J6577 146



J1034

J6577

Pole GuardsHot Dip GalvanizedPole Guards are fastened to the base of poles located atcorners and other vulnerable spots to protect from vehiculardamage.

The dimensions given are those of the flat plate beforebending on a 7-1/2-inch radius. All holes are 9/16-inch formounting with 1/2-inch screws.

ApproximateSize Shipping Weight

Catalog No. (Inches) (Lbs. Per 100 Pcs.)J1037 16 x 18 x 1/8 1020


Pole Stubbing Clamps & BandsHot Dip GalvanizedStock numbers J6850 and J6851 each include a saddle, clamping band and staple.Joslyn’s exclusive saddle, attached with four 1/2-inch lag screws, is held incompression between the pole and stub, separating them slightly to allowventilation and prevent any rolling or slipping.

Two assemblies are required per installation. A 5/8-inch bolt of proper length,ordered separately, is used through each band and saddle, taking up the slack andmaking the assembly rigid and secure.

Giant No. 1(For 8-3/4 to 17-3/4 Inch Pole Diameter)

Approximate Shipping WeightCatalog No. Description (Lbs. Per 100 Pcs.)J6847 2-1/2” x 12 Ga. X 8’ Band Only 700J6848 Saddle Only 240J6850 Complete Assembly 965

Junior No. 2(For 6 to 12-1/2 Inch Pole Diameter)

Approximate Shipping WeightCatalog No. Description (Lbs. Per 100 Pcs.)J6844 2-1/4’ x 12 Ga. X 5’10” Band Only 480J6845 Saddle Only 160J6851 Complete Assembly 640


CROSS SECTION DETAIL

Pole RoofsThe J2108 Pole Roof is designed to protect the most vulnerable part of the poleabove ground—the exposed end grain. In spite of modern pressure-treatingmethods, constant weathering will leach out the preservatives in the exposed poletop and eventually necessitate repair or replacement.

The J2108 is made of long-life roofing material. Since it is non-metallic, there is nodanger of radio interference as with a metallic cap. The two-piece pole roof is easilyinstalled with ten broad head galvanized nails included in the package.

Pole Diameter Approximate Shipping WeightCatalog No. Range (Inches) (Lbs. Per 100 Pcs.)J2108 5-8 64

Pole StepsHot Dip GalvanizedJoslyn Pole Steps have rolled fetter drive threads and a wide, flat driving surfacemake installation fast and easy. A knurled ring indicates the proper driving depth.

ApproximateSize Shipping Weight

Catalog No. (Inches) (Lbs. Per 100 Pcs.)J1118 5/8 x 10 98

Racks, Extension BracketHot Dip GalvanizedJoslyn Rack Extension Brackets are used to provide additional clearance between asecondary rack and the pole surface when necessary to clear obstructions ormaintain proper wire alignment. Two brackets are required for installation.

The 9 gauge steel bracket back, with a 4-inch wide bearing surface, is curved to fitthe pole and has three staggered holes to permit mounting with either a 5/8-inchbolt or two 1/2-inch lag screws. A 5/8 x 2-inch carriage bolt is furnished with eachbracket for attaching the rack.

Pole Steps, DetachableHot Dip GalvanizedDetachable Pole Steps are used to prevent unauthorized climbingto the point on a pole where permanent steps are installed.

A special 9/16 x 4-inch fetter drive lag screw permanentlyattaches the mounting plate to the pole. Twisting is preventedby a punched projection. A nail hole is also provided.

The detachable steps can be hung from the lineman’s belt. Whenattached to the pole, they extend 5-1/2 inches. Steps are turnedup at the outside edge to give linemen a steady foothold.

Approximate Shipping WeightCatalog No. Description (Lbs. Per 100 Pcs.)J6235 Pole Plate and Lag Screw 64J6236 Step 59



J6235 J6236

Racks, SecondaryHot Dip GalvanizedJoslyn Secondary Racks exceed the strength specifications for both ANSI medium and heavy type racks.

Smooth, rounded pressed steel struts will not damage insulation when stringing secondaries.

The curved back fits snugly to the pole with a 3-1/4-inch wide bearing surface.

Mounting slots on the extended styles are for 5/8-inch bolts and are spaced so that the racksmay be mounted on the opposite side of the pole from a pole mounted transformer using thesame mounting bolts. The groove in the back will retain a 5/8-inch square nut, permitting therack to be installed over existing bolts without disturbing present installations.

J101 or J151 insulators should be ordered separately.

Wire Overall End Mounting ApproximateCatalog No. Number Spacing Length Hole Spacing Shipping Weight(Less Insulators) of Wires (Inches) (Inches) (Inches) (Lbs. Per 100 Pcs.)J767 2 8 18 16 540

3 4J768 3 8 26 24 760J769 3 12 34 32 980

4 8

J768 EXTENDED BACK

Extension From Pole Approximate Shipping WeightCatalog No. (Inches) (Lbs. Per 100 Pcs.)J2355 6 272J2357 9 325



Racks, Cable SupportHot Dip Galvanized

Steel Size Dimensions (Inches) Approximate Shipping WeightCatalog No. (Inches) A B C (Lbs. Per 100 Pcs.)J5116 1 x 1/2 3-3/4 3-5/8 1-3/4 117

Racks and Hooks, Underground CableHot Dip GalvanizedJoslyn underground cable racks and hooks are used forsupporting cable runs in manholes and vaults.

The J5120 series are made from 3/16 x 9/16 x 1-1/2” hotrolled channel with T-slots for attaching hooks spaced at 1-1/2” intervals. 8, 14, and 18-hole racks have 3/4 x 19/32”mounting slots at each end which interlock so that tworacks may be combined as one unit. The longer racks aremounted through the T-slots.

Cable hooks are formed to protect cable from damage. Theyfit snugly into the rack slots and have turned up ends to helpprevent the cable or cable rack insulator from slipping off.

Cable Racks

Overall Mounting ApproximateLength Hole Spacing Number Shipping Weight

Catalog No. (Inches) (Inches) of Holes (Lbs. Per 100 Pcs.)J5124 15 13-1/2 8 150J5125 24 22-1/2 14 230J5126 30 28-1/2 18 290J5127 55-1/4 — 37 540J5128 64-1/4 — 43 640J5147 70-1/4 — 47 720

Cable HooksExtension from Face or Rack Approximate Shipping Weight

Catalog No. (Inches) (Lbs. Per 100 Pcs.)J5131A 4 49J5132A 7-1/2 90J5133A 10 120J5134A 14 240J5135A 18 292

Racks, Underground Cable InsulatorsPorcelainCable rack insulators are designed to rest on cable rack hooks and provideadditional protection for the cable. The J5122 is designed for channel-type hooks.

Radius of Width ApproximateCable Groove Along Groove Shipping Weight

Catalog No. (Inches) (Inches) (Lbs. Per 100 Pcs.)J5122 1-1/2 2-3/4 76



Rods, GroundCopperbondedCopperbonded ground rods have properties which make themparticularly well suited as driven ground electrodes. They areprotected against corrosion by a copper jacket that isbonded to the high strength steel core.

Size Approximate Shipping WeightCatalog No. (Diameter x Length) (Lbs. Per 100 Pcs.)J8338 5/8” x 8’ 705J8338-13 5/8” x 8’ 705J8340 5/8” x 10’ 880J8348 3/4” x 8’ 1035J8350 3/4” x 10’ 1290J8370 1” x 10’ 2325

Rods, Sectional GroundCopperbondedCopperbonded sectional ground rods are available to meetthe requirements for deep, dependable, low-resistancegrounds. These sectional rods are similar to the standardcopperbonded rods, except that they are threaded at eachend and can be joined together with couplings.

Rod Size Approximate Shipping WeightCatalog No. (Diameter x Length) (Lbs. Per 100 Pcs.)J9155 5/8” x 5’ 440J9158 5/8” x 8’ 705J9160 5/8” x 10’ 880J9170 3/4” x 10’ 1290J9190 1” x 10’ 2325


Rods, Couplings andDriving Studs 1Couplings for copperbonded sectionalground rods are produced from highstrength bronze alloy for corrosionresistance and driving strength.Internally, they are fully threaded toallow engagement of a driving stud orcoupled rods during installation.

Driving studs are produced from highstrength steel. The use of driving studsprevents damage to the threaded sectional rod and coupling duringdriving.

Bronze CouplingsFor Rod Approximate

Diameter Shipping WeightCatalog No. (Inches) (Lbs. Per 100 Pcs.)J9180 1/2 16J9182 5/8 25J9183 3/4 42J9184 1 81

Steel Driving StudsFor Rod Approximate

Diameter Shipping WeightCatalog No. (Inches) (Lbs. Per 100 Pcs.)J9186 5/8 22J9187 3/4 33


REMOVABLE BOLT TO TAKEDRIVING BLOWS

THREADEDBRONZE COUPLING

SECTIONALGROUND ROD

SECTIONAL RODS ARE THREADED ON BOTH ENDS. ANY SECTIONAL ROD MAY BE USED AS A TOP,INTERMEDIATE, OR BOTTOM SECTION.

CUT-AWAY SECTIONS OFCOUPLINGS SHOWING ENDSOF RODS AND DRIVING BOLT

Rods, GroundHot Dip GalvanizedJoslyn Galvanized Ground Rods combine economy anddurability and are available in a wide range of diameters andlengths for most grounding requirements. These rods have acone point for easy driving and a plain end for attaching aground rod clamp.

ApproximateRod Size Shipping Weight

Catalog No. (Diameter x Length) (Lbs. Per 100 Pcs.)J5328 5/8” x 8’ 800J5338 3/4” x 8’ 1280J5340 3/4” x 10’ 1460

Rods, Driving ToolThe hand-operated ground rod drivingtool accommodates 1/2” and 5/8”diameter ground rods and will allowthe installation of up to 8 foot groundrods driven from groundline level. Itfeatures reversible internal chamberswhich allow one end to drive the rod to3 foot above ground level and the otherend to drive the remaining 3 foot toground level. The durable heat treatedinternal chambers are designed to resistmushrooming of the ground rod duringthe driving process.



Approximate Shipping WeightCatalog No. Description (Lbs. Each)J26514 Ground Rod Driver for 1/2” and 5/8” Rods 19

Rod, Coupling, Threadless Design

Joslyn Threadless Couplings provide an efficient means of connecting non-threadedground rods. The couplings feature a precision taper core which engages the groundrods during the driving process. Additionally, the tapered core includes groovedsplines to increase the surface contact engagement area and to provide a furtherallowance for variations of ground rod diameters. These high strength couplingsdevelop 100% conductivity of the galvanized or copper plated ground rod.

Ground Rod ApproximatePlated Nominal Diameter Overall Weight

Catalog No. Surface Size Range Length (Per 100 Pcs.)J26512 Zinc 5/8” .593” to .620” 3” 33J26513 Copper 5/8” .550” to .570” 3” 33


Screws, LagGalvanized Gimlet Point lag screws are installed with a wrench. FetterDrive and Twist Drive lag screws can either be wrenched ordriven like a nail for speedier installation without sacrificingany of the holding strength of regular gimlet point lagthreads. Twist Drive lags are furnished with a drive point foradditional starting ease and accuracy. This feature is alsoavailable on most sizes of Fetter Drive lags.

All Joslyn lag screws have rolled threads. Below the head isan upset shoulder with the same outside diameter as thethreads to provide a snug fit in hardware mounting holes.

Catalog No. Minimum ApproximateGimlet Fetter Drive Fetter Drive Twist Drive Size Thread Length Shipping WeightPoint Regular Point Drive Point Drive Point Inches (Inches) (Lbs. Per 100 Pcs.)J8722 J8652HH* 1/4 x 2 1-1/2 2.9J8722-1/2 J8652-1/2HH* 1/4 x 2-1/2 1-3/4 3.5J8723* 1/4 x 3 2 4.1J8732* 5/16 x 2 1-1/2 4.7J8732-1/2* 5/16 x 2-1/2 1-5/8 5.9

J8742-1/2 3/8 x 2-1/2 1-3/4 8.5J8773 J8743 J8743P 3/8 x 3 2 9.9

J8744 J8744P 3/8 x 4 2-1/2 12.8J8753P J8753TP 1/2 x 3 2-1/4 19.6

J8784 J8754 J8754P J8754TP 1/2 x 4 2-5/8 24.0J8754-1/2 J8754-1/2P 1/2 x 4-1/2 2-5/8 26.2

J8755P 1/2 x 5 3 28.0J8765 5/8 x 5 3-1/2 44.2

* Indicates hex head.


GIMLET FETTER DRIVE FETTER DRIVE TWIST DRIVEPOINT REGULAR POINT DRIVE POINT DRIVE POINT

Screws, Lag, Hex Headwith Neoprene Backed Steel WasherGalvanizedHex head lag screws with steel/neoprene washers are ideal tosecure plastic U-cable guards. The neoprene washer providesa cushion between the plastic guard and the steel washer.Diameter of the steel and neoprene washers is 9/16-inch.The lag screws are furnished with gimlet points and threads.

Length ApproximateSize of Shipping Weight

Catalog No. (Inches) Point (Lbs. Per 100 Pcs.)J26486.1 1/4 x 2 — 3.5J26486.2 1/4 x 2-1/2 — 4.0J26917.1 1/4 x 2 1/2 3.5



Shackles, AnchorHot Dip GalvanizedJoslyn Forged Steel Anchor Shackles are used for attaching suspension insulators totowers, yokes and double arming plates. Openings are enlarged to permit the use oftwo or more fittings.

Dimensions (Inches) Ultimate Approximate Shipping WeightCatalog No. A AA B C D E F Strength (Lbs.) (Lbs. Per 100 Pcs.)J2742 1/2 1/2 1-13/16 1-3/8 7/8 1-3/8 5/8 15,000 92J2531 5/8 3/4 2-3/8 1-7/8 1-1/16 1-11/16 5/8 25,000 162J2743 5/8 3/4 2-7/16 1-7/8 1-1/16 1-11/16 3/4 25,000 166

For additional anchor shackles, please refer to “Insulator Fittings” category in the Pole Line Hardware section.

Struts, Poleand Guy SpreadersHot Dip GalvanizedTwo J0502 Pole Struts are used to make a pole self-supporting where space is limited or the right-of-way isnarrow. Normal guying techniques cannot be used.

Guy Spreaders are similar to the pole strut in construction.They are used singly for light guying where it is not possibleto install a conventional down-guy.

C E ApproximateExtension Extension Shipping Weight

Catalog Channel From Pole (Lbs. PerNo. Description Size (Inches) (Inches) 100 Pcs.)J0502 Pole Strut 1 x 1/2 x 1/8 15 980J0503 Guy Spreader 2 x 5/8 x 1/4 36 2000

J26486 Series

J26917.1 Series


StaplesCoppercoated, Hot Dip Galvanized,Electro-Galvanized, Mill GalvanizedJoslyn coppercoated, hot dip galvanized, electro-galvanized and mill galvanizedstaples are used to secure ground wire and ground wire molding to wood poles.

Rolled (Diamond) PointDimensions (Inches) Approximate

(Length x Inside Width Shipping WeightCatalog No. Finish x Wire Diameter) (Lbs. Per 100 Pcs.)J127 Hot Dip Galvanized 2 x 1-1/16 x 3/16 3.3J128 Hot Dip Galvanized 3 x 1-1/16 x 1/4 7.9J142 Hot Dip Galvanized 3 x 1-1/2 x 1/4 8.3J156 Hot Dip Galvanized 2 x 1/2 x .162 2.5J172 Hot Dip Galvanized 1-1/2 x 3/8 x .148 1.5J173 Hot Dip Galvanized 1-3/4 x 3/8 x .148 1.6J7487HDG Hot Dip Galvanized 2 x 5/8 x .162 2.3J7493HDG Hot Dip Galvanized 3 x 1-1/16 x 1/4 5.7J6490 Coppercoated 2 x 5/8 x .162 3.6J6492 Coppercoated 1 x 1/4 x .114 .5J6493 Coppercoated 1-1/4 x 1/4 x .114 .6J6494 Coppercoated 1-1/2 x 5/16 x .144 1.2J6495 Coppercoated 1-3/4 x 3/8 x .144 1.5J6496 Coppercoated 2 x 1/2 x .162 2.2J6497 Coppercoated 3 x 1-1/16 x 1/4 8.0J6498 Coppercoated 2-1/2 x 1-1/16 x 3/16 3.9J6522 Coppercoated 3 x 1 x 1/4 7.9J6524C Coppercoated 3 x 1-1/2 x 1/4 8.3J7483 Electro-Galvanized 1-1/2 x 3/8 x .148 1.4J7484 Electro-Galvanized 1-3/4 x 3/8 x .148 1.5J7486 Electro-Galvanized 2 x 1/2 x .162 2.2J7487 Electro-Galvanized 2 x 5/8 x .162 2.3J7488 Electro-Galvanized 2 x 5/8 x 3/16 3.2J7490 Electro-Galvanized 2-1/4 x 25/32 x 3/16 3.6J7491 Electro-Galvanized 2-1/2 x 29/32 x 3/16 3.7J7493 Electro-Galvanized 3 x 1-1/16 x 1/4 7.5

Cut (Slash) PointDimensions (Inches) Approximate

(Length x Inside Width Shipping WeightCatalog No. Finish x Wire Diameter) (Lbs. Per 100 Pcs.)J157 Hot Dip Galvanized 2 x 1/2 x .162 2.4J1672G Hot Dip Galvanized 1-1/2 x 1/4 x .148 1.4J1672 Mill Galvanized 1-1/2 x 1/4 x .148 1.4J1673 Mill Galvanized 1-3/4 x 1/4 x .148 2.0J6651 Coppercoated 1-3/8 x 1/2 x .162 1.6J6652 Coppercoated 1-1/2 x 3/8 x .162 1.8J6653 Coppercoated 2 x 1/4 x .162 2.2J6655 Coppercoated 2 x 1/2 x .162 2.3J7496 Electro-Galvanized 1-3/4 x 3/8 x .148 1.6


ROLLED (DIAMOND) POINT

CUT POINT

Staples, Square Shank BarbedGalvanized, Coppercoated(Patent No.’s 3,945,293 and 3,969,975)

Dimensions (Inches) Approximate(Length x Inside Width Shipping Weight

Catalog No. Finish x Wire Diameter) (Lbs. Per 100 Pcs.)J7656 Galvanized 1-1/2 x 3/8 x .131 1.4J7657 Galvanized 2 x 3/8 x .131 1.9J7664 Galvanized 3 x 1-1/16 x 7/32 8.3J7672 Galvanized 2 x 5/8 x .165 3.2J7682 Coppercoated 1-1/2 x 3/8 x .140 1.7



Straps, Reinforcing and SafetyHot Dip GalvanizedThese straps are used with cable suspension clamps.

Reinforcing Straps support the messenger bolt at locations of heavier than normalloading stress, such as long spans. The lower hole fits over the messenger bolt andthe top end is fastened to the pole with a lag screw.

The J7906 Safety Strap will prevent the cable from falling should the messengergive way. The upper hole fits over the messenger bolt and the lower end is laggedto the pole.

Hole Diameter ApproximateSteel Size (Inches) Shipping Weight

Catalog No. Type (Inches) Upper Lower (Lbs. Per 100 Pcs.)J7905 Reinforcing 1-3/4 x 1/8 9/16 11/16 51J7906 Safety 1-3/4 x 1/8 11/16 9/16 71J7908 Reinforcing 2 x 1/8 11/16 13/16 56

J7905 J7906J7908

J7905

J7906


Straps, WallHot Dip GalvanizedJoslyn Wall Straps are used for guyingand deadending messenger strand tobuilding walls.

The J7695 and J7696 terminate strandat the building corners as illustrated.Both are made of 1-3/8 x 11/32-inchsteel with a forged thimbleye. TheJ7695 has two and the J7696 has three 9/16-inch diameter holes spaced8-inches from center-to-center.

The J7692, formed from 1-7/32 x 15/64-inch steel, is used similarly to terminatestrand at a right angle to the building to the building wall. A wire rope thimble isrecommended to protect the strand.

Overall Length Approximate Shipping WeightCatalog No. (Inches) (Lbs. Per 100 Pcs.)J7695 16-7/8 251J7696 24-3/8 325J7692 8 78


Studs, Line PostHot Dip Galvanized

ApproximateDimensions (Inches) Shipping Weight

Catalog No. A B C D E F G H I J (Lbs. Per 100 Pcs.)LONG SHANK—FOR WOOD POLES AND CROSSARMSJ25248.1 3/4 5/8 7-9/16 1/2 1-1/4 6 2-1/4 21/32 9/16 1-1/8 122J25248.3 3/4 5/8 10 1/2 1-1/4 6 Curved 21/32 9/16 1-1/8 146J25248.7 3/4 5/8 7-1/16 1/2 1-1/4 4 2-1/4 21/32 9/16 1-1/8 126J25248.9 3/4 5/8 10-1/16 1/2 1-1/4 6 2 21/32 9/16 1-1/8 126J25248.10 3/4 5/8 12-1/16 1/2 1-1/4 6 2 21/32 9/16 1-1/8 160J25248.11 3/4 5/8 14-1/16 1/2 1-1/4 8 2 21/32 9/16 1-1/8 212J25250.1 3/4 3/4 7-9/16 5/8 1-1/4 4 2-1/4 25/32 11/16 1-1/8 160J25250.6 3/4 3/4 10-1/16 5/8 1-1/4 6 2-1/4 25/32 11/16 1-1/8 180SHORT SHANK—FOR STEEL ARMS AND LINE POST BRACKETSJ25247.1 3/4 5/8 1-3/4 1/4 1-1/4 Full — 21/32 9/16 1-1/8 48J25249.1 3/4 3/4 1-13/16 1/4 1-1/4 Full — 25/32 11/16 1-1/8 58

J7695 AND 7696 THIMBLEYE®

J7695 TYPICAL INSTALLATION

J7692

SHORT SHANK

LONG SHANK

Studs, Washer Head LagHot Dip GalvanizedWasher Head Lag Studs are used for light-duty mounting of cable hangers and cablesuspension clamps. The stud end is manufactured with a forged square washer headand a roll threaded stud with assembled square nut. The lag end has sharp rolledgimlet threads and a cone point.

Lag Size Stud Size Approximate Shipping WeightCatalog No. (Inches) (Inches) (Lbs. Per 100 Pcs.)J9754 9/16 x 4 1/2 x 1-3/8 45J26315 7/8 x 5-1/2 5/8 x 1-1/2 114



Supports, Shield WireHot Dip GalvanizedThe J6394 and J6395 shield wire supports feature two integral through bolts forgreater strength and stability. The curved front pole plate is welded to both shankswhile the curved back plate can be adjusted to fit the pole diameter. Includesforged link and two square nuts.

Shank Length Thread Length Approximate Shipping WeightCatalog No. (Inches) (Inches) (Lbs. Per 100 Pcs.)J6394 11-1/2 5 600J6395 13-1/2 7-1/2 633

Thimbles, Open Wire RopeHot Dip GalvanizedJoslyn Open Wire Rope Thimbles have open ends for use with oval eyebolts inguying assemblies.

For Strand Opening Eye Eye ApproximateDiameter Width Width Length Shipping Weight

Catalog No. (Inches) (Inches) (Inches) (Inches) (Lbs. Per 100 Pcs.)J1057 3/8 5/8 7/8 1-7/8 8.8J1058 1/2 3/4 1-1/8 2 18.4J1059 5/8 15/16 1-1/4 2-7/32 31.0

Washers, Double Coil, Spring LockGalvanizedDouble coil spring lock washers compensate for wood shrinkage to help eliminateradio interference caused by loose hardware.

Size Section For Bolt Diameter Approximate Shipping WeightCatalog No. (Inches) (Inches) (Lbs. Per 100 Pcs.)J175 .141 x .094 3/8 1.1J176 .171 x .125 1/2 3.2J177 .203 x .156 5/8 4.1J178 .234 x .188 3/4 7.0


Washers, SpringHot Dip GalvanizedJoslyn Spring Washers are used to keep units in tension when wood crossarmshrinkage occurs. These washers are shaped so that the nut of the bolt seats on a flat surface when tightened.

Dimensions (Inches) ApproximateFor Bolt Material Formed C Shipping Weight

Catalog No. Diameter Size Length (Opening) (Lbs. Per 100 Pcs.)J3539 1/2 3/16 x 1 2-7/16 1/2 19.8J3540 5/8 1/4 x 1-3/4 3-3/4 9/16 98.5J3541 3/4 1/4 x 1-3/4 3-3/4 9/16 96.3J3542 7/8 1/4 x 1-3/4 3-3/4 9/16 91.5J3543 1 1/4 x 1-3/4 3-3/4 9/16 91.0


Washers, Spring LockGalvanizedJoslyn Spring Lock Washers are made of high grade spring steel to keep a bolt nutin tension, insuring a tight assembly under all temperatures.

Size Section For Bolt Diameter Approximate Shipping WeightCatalog No. (Inches) (Inches) (Lbs. Per 100 Pcs.)J134 .141 x .094 3/8 .8J138 .171 x .125 1/2 2.0J139 .203 x .156 5/8 2.7J140 .234 x .188 3/4 4.5

Washers, RoundGalvanized

Outside Thickness Hole For Bolt ApproximateDiameter Gauge Diameter Diameter Shipping Weight

Catalog No. (Inches) B.W. (Inches) (Inches) (Lbs. Per 100 Pcs.)J1084 1 14 7/16 3/8 1.6J1086 1-3/8 12 9/16 1/2 3.9J1088 1-3/4 10 11/16 5/8 7.9J1089 2 9 13/16 3/4 11.0

Washers, SquareGalvanized

Hole For Bolt ApproximateSize Diameter Diameter Shipping Weight

Catalog No. (Inches) (Inches) (Inches) (Lbs. Per 100 Pcs.)SQUARE FLAT WASHERSJ1073 2 x 2 x 1/8 9/16 1/2 13.0J1074 2 x 2 x 1/8 11/16 5/8 13.8J1075 2-1/4 x 2-1/4 x 3/16 11/16 5/8 26.0J1076 2-1/4 x 2-1/4 x 3/16 13/16 3/4 26.8J1078 3 x 3 x 3/16 13/16 3/4 48.0J1079 3 x 3 x 1/4 13/16 3/4 64.0J1080 4 x 4 x 3/16 13/16 3/4 87.0J1082 4 x 4 x 1/4 15/16 3/4 & 7/8 114.0J1081 4 x 4 x 1/2 1-1/8 1 216.0SQUARE CURVED WASHERSJ6821 2-1/4 x 2-1/4 x 3/16 11/16 5/8 26.0J6822 2-1/2 x 2-1/2 x 3/16 11/16 5/8 33.0J113 3 x 3 x 1/4 11/16 5/8 65.0J6823 3 x 3 x 1/4 13/16 3/4 56.5J133 3-1/4 x 3-1/4 x 1/4 13/16 3/4 76.0J6828 3-1/2 x 3-1/2 x 3/8 15/16 7/8 130.0J6829 4 x 4 x 1/4 15/16 7/8 117.0J6836 4 x 4 x 1/4 13/16 3/4 117.0J6838 4 x 4 x 3/8 13/16 3/4 168.0



SQUARE CURVED WASHERS

SQUARE WASHERS

Washers, CastHot Dip GalvanizedGeneral Design

Cast washers give greater strength and added resistance to corrosion.

All cast washers are of the reinforced rib design to put metal where strengthrequirements indicate. Each design includes a heavy boss around the bolt hole.Radial ribs extend from the boss to the outer edges of the washer to reinforce thewasher against compression or dishing loads.


Washers, Cast, Square CurvedHot Dip Galvanized

Dimensions (Inches) Approximate WeightCatalog No. A B C D E (Lbs. Per 100 Pcs.)P141A 13/16 2-1/4 2-1/4 1-3/8 1/4 22P143 11/16 3 3 1-3/8 5/16 45P143A 13/16 3 3 1-1/2 3/8 58P144 13/16 4 4 1-5/8 7/16 124P144B 15/16 4 4 2 7/16 118

©2004 Joslyn Manufacturing Co. • 9200 W. Fullerton Avenue • Franklin Park, IL 60131 • www.joslynmfg.comPhone: 800-4-JOSLYN (800-456-7596) or 773-625-1500 • Fax 800-443-7380 or 773-625-0090

PH-127

Washers, Cast, Rectangular CurvedHot Dip Galvanized

Dimensions (Inches) Approximate WeightCatalog No. A B C D Thickness (Lbs. Per 100 Pcs.)P120 15/16 3 4 2 7/16 112P142A 13/16 2-1/4 3-1/2 1-1/2 5/16 43

Washers, Cast, FlatHot Dip Galvanized

Dimensions (Inches) Approximate WeightCatalog No. Fig. A B C D Thickness (Lbs. Per 100 Pcs.)P56 1 11/16 2-1/4 2-1/4 1-1/4 9/32 22P56A 1 13/16 2-1/4 2-1/4 1-1/4 9/32 18P84A-1 2 15/16 3-1/2 1-1/2 — 1/2 73



Fig. 1 Fig. 2

Wireholders, J.E.M. Nylon Alloy MaterialZ-Series with Galvanized Screw 1(Patent No. 5,448,018)

Joslyn Z-series wireholders are produced from ultravioletstabilized nylon alloy compound with reinforced fibers whichprovide approximately twice the fracture strength asporcelain insulators. The engineered blend material providesinsulating properties equal to porcelain. Z-series wireholderseliminate chipping and breaking problems associated withporcelain. The unique design features a square flat topwhich can be used with a hammer to start installation. Theflat top also features an “egg carton” design for indexing aninstalling tool when using a cordless drill. Each package ofZ-wireholders includes a supply of installing tools for usewith a 1/2-inch drive cordless drill to obtain maximuminstallation efficiency.

Lag Screw “L” ApproximateDiameter Length Shipping Weight

Catalog No. (Inches) Color (Inches) (Lbs. Per 100 Pcs.)J089Z 11/32 (#22) Black 2-1/4 24J0893Z 11/32 (#22) Black 3 26J0894Z 11/32 (#22) Black 4 28J089ZG 11/32 (#22) Gray 2-1/4 24J0893ZG 11/32 (#22) Gray 3 26J0894ZG 11/32 (#22) Gray 4 28


Wireholders, Service Mast, Z-SeriesJ.E.M. Nylon Alloy Material 1Hot Dip Galvanized Bracket(Patent No. 5,448,018)

Joslyn Z-series service mast wireholders are manufacturedfrom an engineered blend of nylon alloy reinforced withfibers to provide approximately twice the fracture strengthas porcelain. The durable nylon alloy material is U.V.stabilized for extended service life in ultraviolet exposure.

The bracket design features an open slot which allows thebracket to be installed without disassembling the bolts.Accommodates a range of 1-1/4 through 3-inch diameterpipe. Dimensions of the nylon alloy insulator are the same asshown for the J089Z wireholders.


Catalog No. Color (Lbs. Per 100 Pcs.)J0588Z Black 110J0588ZG Gray 110

J.E.M. is a registered trademark of Joslyn.


JOSLYNManufacturing Co. Alphabetical Index

Description PageAdapters, Pin Hole PH-110Anchors, Clamps, Auxiliary Anchor Rod Eye PH-13Anchors, Cross Plate PH-16Anchors, Expanding PH-15Anchors, Holding Capacity for Double-Helix,

Power Hub Anchors PH-6Anchors, Holding Capacity for Multiple-Helix,

Power Shaft Anchors PH-4Anchors, Holding Capacity for Single-Helix,

Power Hub Anchors PH-5Anchors, Installing Tool Components PH-14Anchors, No-Wrench PH-13Anchors, Pole Key (Expanding) PH-16Anchors, Power Hub PH-7Anchors, Power Shaft PH-10Anchors, Power Shaft PH-12Anchors, Power Shaft, Extension Assemblies PH-11Anchors, Power Shaft, Extension Assemblies PH-12, 13Anchors, Power Shaft, Eyebolt Assemblies PH-11Anchors, Power Shaft, Helix-Extension

Assemblies PH-11Anchors, Rock PH-15Anchors, Rods, Threaded, Forged Eye PH-17Anchors, Rods, Threaded, Forged Eye,

Copperbonded PH-18Anchors, Soil Classification Data PH-4Arm, Steel Deadend PH-18Attachments, Guy PH-22Attachments, Guy Hook PH-19 - 21Attachments, Guy Hook, Combination Type PH-23Attachments, Guy, Pole Eye Plate PH-24, 25Attachments, Guy, Strain Insulator PH-23Balcony, Pole PH-26Bands, Pole PH-27Bands, Pole, Accessories PH-27, 28Bands, Universal Pole PH-29Bands, Universal Pole, Accessories PH-29Bayonets, Ground Wire PH-30Bolts, Brace PH-30Bolts, Carriage PH-31Bolts, Clevis PH-31Bolts, Double Arming PH-32Bolts, Machine PH-34Bolts, Machine, “A” Cable Suspension PH-32Bolts, Machine, “B” Cable Suspension PH-33Bolts, Oval Eye PH-35Bolts, Shoulder Eye PH-36Bolts, Spool PH-36Bolts, Thimbleye PH-37Braces, Alley Arm PH-37Braces, Angle PH-38Braces, Crossarm, Flat Steel PH-38Braces, Crossarm, Wood PH-39Braces, Double Span, Steel (Angle) PH-38Braces, Guard Arm PH-40Braces, Reversible Crossarm, Wood PH-39

Description PageBrackets, Angle PH-40Brackets, Apparatus Mounting PH-41 - 43Brackets, Cable Extension PH-47Brackets, Cable Riser PH-46Brackets, Cable Spacer PH-46Brackets, Cast, Angle Double Deadend PH-45Brackets, Deadend Tongue PH-47Brackets, Equipment and Insulator PH-44Brackets, Insulator PH-45Brackets, Neutral Extension PH-47Brackets, Neutral Wire PH-48Brackets, Pole Brace Connector PH-50Brackets, Pole Top PH-48, 49Brackets, Post Insulator PH-49Brackets, Service Mast PH-50Brackets, Transformer Trainer PH-50Brackets, Western Union Wall PH-51Clamps, Aerial Cable, Heavy Duty PH-52, 54Clamps, Aerial Cable, Light Duty PH-53Clamps, Aerial Cable, Medium Duty PH-51 - 53Clamps, Aerial, Mid Span PH-51Clamps, B-Beam PH-56Clamps, Bonding/Grounding PH-59Clamps, Bronze, Bonding PH-57Clamps, B-Strand, Ground PH-56Clamps, Cable Suspension PH-57Clamps, Cable Suspension, Angle PH-57Clamps, Cable Suspension, Corner PH-54Clamps, Cable Suspension, Corner Attachment PH-54Clamps, Cable Suspension, Type C PH-55Clamps, Conductor PH-58Clamps, Crossover PH-59Clamps, Forged-Eye Anchor Rod, Guy Bonding PH-10Clamps, Ground Rod PH-59, 60Clamps, Guy PH-60, 62Clamps, Hot Line PH-61Clamps, PH Anchor Rod, Guy Bonding PH-10Clamps, Static Wire PH-62Clamps, Support, Type B Extension PH-56Clamps, Suspension, Cable Hanger

(w/Stringing Hook) PH-55, 58Clevises, Deadend Eyelet PH-62Clevises, Heavy Strain Insulator PH-62Clevises, Insulated Secondary & Deadend PH-63 - 65Clevises, Insulated, Swinging PH-65Clevises, Insuluated Crossarm PH-63Clevises, Pipe Riser PH-66Clevises, Thimble PH-66, 67Clevises, Wireholder PH-63Clips, Guy, Malleable PH-67Connectors, Cast, Timber Grid PH-67Couplings, Anchor Rod PH-9Eyelets PH-68Eyenuts for Power Hub Rods PH-9Eyenuts, Forged PH-69Fittings, Cast, Insulator Ball Clevis PH-69


Description PageFittings, Cast, Insulator Ball Eye PH-70Fittings, Cast, Insulator Ball Hook PH-70Fittings, Cast, Insulator Clevis Eye PH-70Fittings, Cast, Insulator Clevis-Clevis PH-72Fittings, Cast, Insulator Socket Clevis PH-72Fittings, Cast, Insulator Socket Eye PH-71Fittings, Cast, Insulator Socket Y Clevis PH-73Fittings, Cast, Insulator Y Clevis Eye PH-71Fittings, Insulator - Hot Line Fittings PH-73Fittings, Insulator, Anchor Shackles PH-74Fittings, Insulator, Distribution Strain Clamp PH-74Fittings, Sidewalk Guy PH-75Gains, Braceless Crossarm PH-77Gains, Crossarm PH-76Gains, Crossarm (w/Shelf) PH-78Gains, Curved Grid PH-75Gains, Pole PH-79Guards, Cable, Plastic PH-79Guards, Cable, Steel PH-80Guards, Ground Wire Molding, Plastic PH-83Guards, Guy, Plastic PH-82Guards, Guy, Plastic, Helical Pigtail Fastener PH-83Guards, Tapered Guy, Steel PH-81Hangers, Messenger PH-84Holders, Guy Strand Coil PH-85Hooks PH-84Hooks, Guy (also see “Attachments, Guy”) PH-85Hooks, Placing, Type B PH-85Insulators, Porcelain, Guy Strain PH-87Insulators, Porcelain, Spool PH-86Irons, Pulling-In PH-86Ladders, Manhole PH-88Links PH-89Links, Cable Reinforcing PH-89Links, Extension PH-89Links, Forged PH-90Luminaire Floodlight Supports - Steel PH-93Luminaire Security Light Supports - Steel PH-93Luminaire Supports - Grounding Lug Assembly PH-93Luminaire Supports - Steel PH-90 - 92Molding, Ground Wire, Plastic PH-83Mounts, Cast, Transformer PH-95Mounts, Triple Transformer (Rack Type) PH-94Nails, Pole Dating PH-100Nails, Steel PH-100National Telephone Supply Company Products PH-95 - 100Nuts, Concave Locknuts PH-100Nuts, Square PH-101Nuts, Washer PH-101Pin, Hole Adapters PH-110Pins, Angle Crossarm PH-108Pins, Angle Pole Top PH-106Pins, Corner Crossarm - Lead Threads PH-109Pins, Crossarm, Forged Steel PH-103Pins, High Voltage - Forged Steel PH-104Pins, Offset Pole Top PH-106

Description PagePins, Pole Top PH-105, 106Pins, Pole Top, 45o Angle PH-107Pins, Steel PH-108Pins, Thimble Adapters with Lead Threads PH-110Pins, Transformer Lead PH-109, 110Pins, Wide Base Clamp PH-107Plates, Double Arming PH-111Plates, Lift, For Thimbleye Bolts PH-110Plates, Pole Bearing PH-111Plates, Pole Butt Grounding PH-111Plates, Strain PH-112Pole Guards PH-112Pole Roofs PH-113Pole Steps PH-113Pole Steps, Detachable PH-114Pole Stubbing Clamps & Bands PH-113Racks and Hooks, Underground Cable PH-115Racks, Cable Support PH-115Racks, Extension Bracket PH-114Racks, Secondary PH-114Racks, Underground Cable Insulators PH-116Rod, Coupling, Threadless Design PH-118Rods w/Eyenuts, Anchor, Power Hub PH-8Rods, Anchor, Extension Assemblies, Power Hub PH-9Rods, Anchor, Power Hub PH-8Rods, Couplings and Driving Studs PH-117Rods, Ground PH-116Rods, Ground PH-117Rods, Ground Rod Driving Tool PH-118Rods, Sectional Ground PH-116Screws, Lag PH-119Screws, Lag, Hex Head w/Neoprene Backed

Steel Washer PH-120Shackles, Anchor PH-120Splices, Compression PH-95 - 100Staples PH-121Staples, Square Shank Barbed PH-122Straps, Reinforcing and Safety PH-122Straps, Wall PH-123Struts, Pole and Guy Spreaders PH-120Studs, Line Post PH-123Studs, Washer Head Lag PH-124Supports, Shield Wire PH-124Thimbles, Open Wire Rope PH-124Washers, Cast, Flat PH-128Washers, Cast, Rectangular Curved PH-127Washers, Cast, Square Curved PH-127Washers, Double Coil, Spring Lock PH-124Washers, Round PH-125Washers, Spring PH-125Washers, Spring Lock PH-125Washers, Square PH-126Wireholders, J.E.M.R Nylon Alloy Material

Z-Series PH-128Wireholders, Service Mast, Z-Series J.E.M.R

Nylon Alloy Material PH-129

Alphabetical Index JOSLYNManufacturing Co.


JOSLYNManufacturing Co. Numerical Index

Catalog Number Page13000 PH-7013200 PH-6913201 PH-6913400 PH-7013500 PH-7313505 PH-7333100 PH-7233102 PH-7233300 PH-7233301 PH-7233302 PH-7233303 PH-7333304 PH-731061PLUM PH-971-080C PH-951-102J PH-951-102J PH-961-114J PH-951-114J PH-961-128E PH-951-128J PH-951-128J PH-961-128M PH-951-128M PH-961-128P PH-961-162/7J PH-951-162/7J PH-961-162J PH-951-162M PH-951-162P PH-961-162X080J PH-981-162X128J PH-981-162X128P PH-981-204/7M PH-961-204/7P PH-961-204M PH-951-204M PH-961-204P PH-951-204P PH-961-204X PH-961-204X162P PH-981-229P PH-951-258/3X PH-961-258/7T PH-961-258/7X PH-961-258T PH-951-258T PH-961-258X PH-951-258X PH-961-258X204X PH-981-289/7E8 PH-951-289/7E8 PH-961-289X PH-951-289X PH-96

Catalog Number Page1-3/081P PH-961-3/081P PH-971-3/102P PH-961-3/102P PH-961-3/102X PH-961-3/114X PH-961-3/128X PH-961-3/128X PH-961-3/162E8 PH-961-325/7F6 PH-951-325/7F6 PH-961-365/7G3 PH-951-365/7G3 PH-961-410/7G9 PH-951-410/7G9 PH-961-460/7H5 PH-961-4A-X PH-9716100F PH-901-6A-P PH-971702X PH-981704P PH-981706P PH-981-8A-P PH-972004 POLE DATING NAIL PH-100267PLUM PH-973-045B PH-953-064B PH-953-128J PH-9631-CJ PH-9931-DC PH-9931-DJ PH-9931-EJ PH-993-2A-F6 PH-973-3/128E8 PH-9633000-1/2 PH-7133220-1/2 PH-7033220-5/8 PH-7033400-5/8 PH-7133440-5/8 PH-713-7/114G3 PH-963-8D-P PH-97467ORANGE PH-9751-ORANGE PH-9951-PEACH PH-9951-PLUM PH-9953-XMJ PH-9953-XPJ PH-9955-PLUM:ORANGE PH-99661M PH-97661P PH-97AL2SOL-X PH-97AL2STR-X PH-97AL4SOL-M PH-97AL4SOL-P PH-97

Catalog Number PageAL4SOL-X PH-97AL4STR-M PH-97AL4STR-P PH-97AL4STR-X PH-97AL6SOL-J PH-97AL6STR-J PH-97AR1/0PLUM PH-98AR2/0-74A PH-98AR2-1PEACH PH-98AR2-1PLUM PH-98AR3/0-75A PH-98AR4/0-75A PH-98AR4-3ORANGE PH-98BT2111 PH-74BT3009 PH-74BT3009BNK PH-74BT3022 PH-74BT3022BNK PH-74BT3023 PH-74BT3023BNK PH-74BT3024 PH-74BT3024BNK PH-74BT3025 PH-74BT3025BNK PH-74BT3080 PH-90BT3082 PH-90BT3085 PH-90BT3086 PH-90BT3090 PH-73J0101 PH-86J025 PH-109J0283 PH-15J0283-1 PH-15J0311 PH-66J0313 PH-63J0322 PH-65J0342 PH-63J0502 PH-120J0503 PH-120J0521 PH-75J0522 PH-75J0555 PH-66J0588Z PH-129J0588ZG PH-129J0590 PH-50J0613 PH-86J075 PH-63J0870 PH-15J0893Z PH-128J0893ZG PH-128J0894Z PH-128J0894ZG PH-128J089Z PH-128J0893ZG PH-128


Catalog Number PageJ093 PH-65J100A PH-86J100B PH-86J101 PH-86J1019 PH-85J1030 PH-60J1034 PH-112J1037 PH-112J1048 PH-67J1049 PH-67J1050 PH-67J1051 PH-67J1052 PH-67J1053 PH-67J1057 PH-124J1058 PH-124J1059 PH-124J1061 PH-60J1070 PH-84J1073 PH-126J1074 PH-126J1075 PH-126J1076 PH-126J1078 PH-126J1079 PH-126J1080 PH-126J1081 PH-126J1082 PH-126J1084 PH-125J1086 PH-125J1088 PH-125J1089 PH-125J1092 PH-69J1093 PH-69J1095 PH-57J1096 PH-57J1118 PH-113J1126 PH-68J1127 PH-68J113 PH-126J1130 PH-30J1132 PH-30J1134 PH-30J1135 PH-30J1136 PH-30J1137 PH-30J1139 PH-30J1163 PH-59J1164 PH-59J1190Z PH-108J1220Z PH-105J12249 PH-9J12249R PH-8J12249R.1 PH-8

Catalog Number PageJ12249R.2 PH-8J12250 PH-9J12250R PH-8J12250R.1 PH-8J12250R.2 PH-8J12250R.3 PH-8J12251 PH-9J12251R PH-8J12251R.1 PH-8J12251R.2 PH-8J12251R.3 PH-8J12253 PH-9J12253R PH-8J12253R.1 PH-8J12253R.2 PH-8J12253R.3 PH-8J12254 PH-9J12254R PH-8J12254R.1 PH-8J12254R.2 PH-8J12254R.3 PH-8J12255 PH-9J12255R PH-8J12255R.1 PH-8J12255R.2 PH-8J12255R.3 PH-8J12585 PH-9J12587 PH-9J12589 PH-9J12593 PH-9J127 PH-121J128 PH-121J1300 PH-63J133 PH-126J134 PH-125J1368 PH-105J1368Z PH-105J1368ZSL PH-105J138 PH-125J139 PH-125J1398 PH-64J1399 PH-64J140 PH-125J142 PH-121J1442 PH-38J1448 PH-81J1491G PH-82J1491Y PH-82J1493Y PH-82J1498Y PH-82J1501 PH-75J1502 PH-75J1506 PH-38J1508 PH-38

Catalog Number PageJ150A PH-86J150B PH-86J151 PH-86J1510 PH-38J1512 PH-38J1514 PH-38J1522 PH-37J1525 PH-37J1526 PH-37J1528 PH-81J156 PH-121J157 PH-121J1600 PH-111J1614 PH-65J1618 PH-81J1626 PH-65J16512 PH-9J16512 PH-9, 69J16562 PH-9, 69J1672 PH-121J1672G PH-121J1673 PH-121J172 PH-121J173 PH-121J175 PH-124J176 PH-124J177 PH-124J178 PH-124J2008SES PH-105J2008-XZ PH-105J2008Z PH-105J2010 PH-105J2011 PH-105J203Z PH-103J204 PH-103J204Z PH-103J206Z PH-103J207Z PH-103J2108 PH-113J211 PH-103J211CDN.1 PH-103J211CDN.1Z PH-103J211Z PH-103J215 PH-109J221 PH-103J221Z PH-103J222 PH-103J22267 PH-103J222Z PH-103J2235 PH-58J224 PH-103J2245 PH-58J224Z PH-103J2258 PH-36

Numerical Index JOSLYNManufacturing Co.



Catalog Number PageJ2260 PH-36J2262 PH-36J23083.8 PH-80J23084.8 PH-80J23161.1 PH-9J23161.2 PH-9J23186.0 PH-28J23333 PH-48J23365 PH-11J23371 PH-11J23378.10 PH-11J23378.3 PH-11J23378.5 PH-11J23378.7 PH-11J23380ACA PH-10J23381ACA PH-10J23382ACA PH-10J23383ACA PH-10J23395.8 PH-80J2343-1/2 PH-36J2344-1/2 PH-36J2346-1/2 PH-36J2348-1/2 PH-36J2352 PH-47J2355 PH-114J2357 PH-114J23738CAB.1 PH-7J23738CAB.2 PH-7J23738CAB.3 PH-7J23738CAB.4 PH-7J23738CAB.5 PH-7J23738CAB.6 PH-7J23738CAB.7 PH-7J23739CAB.1 PH-7J23739CAB.2 PH-7J23742CAB.1 PH-7J23742CAB.2 PH-7J23742CAB.3 PH-7J23743CAB.1 PH-7J23743CAB.2 PH-7J2395 PH-36J2396 PH-36J2398 PH-36J24293CAB.3 PH-7J24515 PH-41J24516 PH-41J24517 PH-41J24518 PH-43J24519 PH-43J24626Z PH-104J24665 PH-43J24673 PH-42J24711 PH-42J24712 PH-42

Catalog Number PageJ24993CA.1 PH-11J24993CA.2 PH-11J250 PH-64J25071ACA PH-12J25075.3 PH-12J25075.5 PH-12J25075.7 PH-12J25088.1 PH-57J25093ACA PH-12J251 PH-63J25123ACA PH-12J25164 PH-22J25179 PH-106J252 PH-64J2520 PH-28J2522 PH-28J25247.1 PH-123J25248.1 PH-123J25248.10 PH-123J25248.11 PH-123J25248.3 PH-123J25248.7 PH-123J25248.9 PH-123J25249.1 PH-123J25250.1 PH-123J25250.6 PH-123J25255.1 PH-49J25256.1 PH-49J25256.2 PH-49J2531 PH-120J255 PH-64J25564 PH-59J25594 PH-93J25670 PH-48J2575 PH-23J25828.1 PH-18J25828.2 PH-18J25829.2 PH-18J25829.3 PH-18J25830.4 PH-18J2584 PH-51J25911 PH-56J25932 PH-60J25985 PH-60J25996CAB.1 PH-7J25996CAB.2 PH-7J25996CAB.3 PH-7J25996CAB.4 PH-7J25996CAB.5 PH-7J25996CAB.6 PH-7J25996CAB.7 PH-7J25996CAB.8 PH-7J25997CAB.1 PH-7J25997CAB.2 PH-7

Catalog Number PageJ26167 PH-42J26171 PH-43J26190 PH-43J26200 PH-93J26315 PH-124J26482 PH-41J26486.1 PH-120J26486.2 PH-120J26490 PH-92J26512 PH-118J26513 PH-118J26514 PH-118J26559 PH-42J26560 PH-42J26620C PH-41J26634 PH-41J26639 PH-42J26661 PH-106J26662 PH-106J26714 PH-10J26715 PH-10J26716 PH-10J26725 PH-42J26761 PH-106J26762 PH-106J26837 PH-107J26838 PH-106J26853.1 PH-38J26876Z PH-105J26917.1 PH-120J26930 PH-107J26936ACA PH-10J26937ACA PH-10J26938ACA PH-10J26944 PH-107J26945Z PH-106J26946Z PH-106J26947Z PH-106J26948Z PH-108J2742 PH-120J2743 PH-120J2802 PH-103J2802Z PH-103J2840 PH-110J2841 PH-110J29000 PH-14J29005.2 PH-14J29005.3 PH-14J29005.4 PH-14J29010 PH-14J29011 PH-14J29021.1 PH-14J29021.2 PH-14J29022.1 PH-14


Catalog Number PageJ29022.2 PH-14J29726ACA PH-10J3225 PH-110J3230 PH-10J3231 PH-10J3233 PH-10J3316P PH-84J3318 PH-84J3322 PH-107J3324 PH-107J3436 PH-15J3437 PH-15J3438 PH-15J3516 PH-16J3520 PH-16J3520-1 PH-16J3524 PH-16J3524-1 PH-16J3524-3/4 PH-16J3539 PH-125J3540 PH-125J3541 PH-125J3542 PH-125J3543 PH-125J3942.L PH-89J4023 PH-110J4060 PH-79J455 PH-62J456 PH-62J4730WR PH-39J4760R PH-39J4766R PH-39J4772R PH-39J4788R PH-39J4817 PH-16J5116 PH-115J5122 PH-116J5124 PH-115J5125 PH-115J5126 PH-115J5127 PH-115J5128 PH-115J5131A PH-115J5132A PH-115J5133A PH-115J5134A PH-115J5135A PH-115J5147 PH-115J515 PH-47J5328 PH-117J5338 PH-117J5340 PH-117J5455 PH-62J5518 PH-83

Catalog Number PageJ5526 PH-39J554 PH-66J555 PH-66J5718 PH-83J575 PH-66J606 PH-104J606Z PH-104J607 PH-104J607Z PH-104J608Z PH-104J610 PH-104J612 PH-104J6157 PH-29J6235 PH-114J6236 PH-114J625 PH-104J626Z PH-104J6270 PH-29J6273 PH-28J6274 PH-28J6275 PH-29J6277 PH-29J6280 PH-29J6288 PH-28J629 PH-104J631 PH-104J635-DC PH-104J6394 PH-124J6395 PH-124J6478 PH-58J647Z PH-104J6490 PH-121J6492 PH-121J6493 PH-121J6494 PH-121J6495 PH-121J6496 PH-121J6497 PH-121J6498 PH-121J6500 PH-68J6506 PH-22J6510 PH-69J6511 PH-69J6515 PH-69J6516 PH-69J6522 PH-121J6524C PH-121J6524WCA PH-13J6526WCA PH-13J6528WCA PH-13J6530WCA PH-13J6550C PH-68J6550WCA PH-13J6551 PH-68

Catalog Number PageJ6555 PH-22J6556 PH-22J6566 PH-13J6577 PH-112J658 PH-104J6585WCA PH-13J6641 PH-27J6643 PH-27J6644 PH-27J6650 PH-27J6650F PH-27J6651 PH-121J6652 PH-121J6653 PH-121J6655 PH-121J6657 PH-89J6658 PH-89J6659 PH-89J6684 PH-27J6765 PH-50J6765A PH-50J6821 PH-126J6822 PH-126J6823 PH-126J6828 PH-126J6829 PH-126J6836 PH-126J6838 PH-126J6844 PH-113J6845 PH-113J6847 PH-113J6848 PH-113J6850 PH-113J6851 PH-113J6865 PH-94J6866 PH-94J7126 PH-38J7128 PH-38J7130 PH-38J7132 PH-38J715 PH-105J715Z PH-105J720 PH-105J720Z PH-105J728003 PH-90J728004 PH-90J728006 PH-90J729008 PH-91J732 PH-62J7327 PH-17J7328 PH-17J7329 PH-17J7338 PH-17J7340 PH-17




Catalog Number PageJ7350 PH-17J740 PH-105J740Z PH-105J741003 PH-90J741006 PH-90J7415 PH-17J7416 PH-17J7417 PH-17J7418 PH-17J742006 PH-91J742008 PH-91J7427 PH-17J7428 PH-17J7429 PH-17J7430 PH-17J743010 PH-92J743012 PH-92J743014 PH-92J743016 PH-92J743018 PH-92J743020 PH-92J744Z PH-105J7483 PH-121J7484 PH-121J7486 PH-121J7487 PH-121J7487HDG PH-121J7488 PH-121J7490 PH-121J7491 PH-121J7493 PH-121J7493HDG PH-121J7496 PH-121J751006 PH-92J751008 PH-92J7516 PH-17J7517 PH-17J7518 PH-17J7527 PH-17J7528 PH-17J7529 PH-17J7530 PH-17J7538 PH-17J7540 PH-17J761008 PH-91J761010 PH-91J761012 PH-91J762010 PH-91J762012 PH-91J762014 PH-91J762016 PH-91J7656 PH-122J7657 PH-122J7664 PH-122

Catalog Number PageJ767 PH-114J7672 PH-122J768 PH-114J7682 PH-122J769 PH-114J769010 PH-92J769012 PH-92J7692 PH-123J7695 PH-123J7696 PH-123J771018 PH-93J7751 PH-90J7754 PH-90J7810 PH-31J7812 PH-31J7814 PH-31J7886 PH-110J7890 PH-110J7901 PH-57J7901A PH-57J7902B PH-57J7905 PH-122J7906 PH-122J7908 PH-122J7920 PH-47J7921 PH-47J7929 PH-89J7930 PH-59J7936 PH-40J7956 PH-56J800 PH-110J803 PH-100J804 PH-100J8050 PH-37J8051 PH-37J8052 PH-37J8053 PH-37J8054 PH-37J8055 PH-37J806 PH-100J8062 PH-37J8063 PH-37J808 PH-100J810 PH-100J8115 PH-15J8119 PH-86J8120 PH-86J8135 PH-15J8135-1 PH-15J8150 PH-37J8151 PH-37J8152 PH-37J8153 PH-37J8154 PH-37

Catalog Number PageJ816 PH-100J8161 PH-37J8162 PH-37J8163 PH-37J820 PH-100J8200-1 PH-15J8200-3/4 PH-15J8225 PH-60J8240 PH-40J8245 PH-84J830 PH-100J8300 PH-57J8301 PH-57J8338 PH-116J8338-13 PH-116J8340 PH-116J8348 PH-116J8350 PH-116J8370 PH-116J8490 PH-59J8491 PH-59J8492 PH-59J8493 PH-59J8561 PH-101J8562 PH-101J8563 PH-101J8563-1 PH-101J8564 PH-101J8564-1 PH-101J8564-1/2 PH-101J8565-1 PH-101J8566 PH-101J8581 PH-100J8582 PH-100J8582H PH-100J8583 PH-100J8583H PH-100J8584 PH-100J8584-1/2 PH-100J8584H PH-100J8585 PH-100J8602 PH-33J8603 PH-33J8604 PH-33J8604-1/2 PH-33J8605 PH-33J8606 PH-33J8607 PH-33J8608 PH-33J8610 PH-33J8624-1/2 PH-30J8634 PH-31J8634-1/2 PH-31J8635 PH-31


Catalog Number PageJ8635-1/2 PH-31J8636 PH-31J8637 PH-31J8638 PH-31J8640 PH-31J8644-1/2 PH-31J8645 PH-31J8646 PH-31J8647 PH-31J8648 PH-31J8652-1/2HH PH-119J8652HH PH-119J8701-1/2 PH-33J8702 PH-33J8702-1/2 PH-33J8703 PH-33J8704 PH-33J8705 PH-33J8706 PH-33J8707 PH-33J8708 PH-33J8709 PH-33J8710 PH-33J8712 PH-33J8714 PH-33J8716 PH-33J8722 PH-119J8722-1/2 PH-119J8723 PH-119J8732 PH-119J8732-1/2 PH-119J8742-1/2 PH-119J8743 PH-119J8743P PH-119J8744 PH-119J8744P PH-119J8753P PH-119J8753TP PH-119J8754 PH-119J8754-1/2 PH-119J8754-1/2P PH-119J8754P PH-119J8754TP PH-119J8755P PH-119J8765 PH-119J8773 PH-119J8784 PH-119J8801-1/2 PH-34J8802 PH-34J8802-1/2 PH-34J8803 PH-34J8804 PH-34J8805 PH-34J8806 PH-34

Catalog Number PageJ8807 PH-34J8808 PH-34J8809 PH-34J8810 PH-34J8812 PH-34J8814 PH-34J8816 PH-34J8818 PH-34J8820 PH-34J8822 PH-34J8824 PH-34J8826 PH-34J8828 PH-34J8860 PH-32J8862 PH-32J8864 PH-32J8866 PH-32J8868 PH-32J8870 PH-32J8872 PH-32J8874 PH-32J8876 PH-32J8877 PH-32J8878 PH-32J8879 PH-32J8880 PH-32J8881 PH-32J8882 PH-32J8884 PH-32J8886 PH-32J8888 PH-32J8890 PH-32J8892 PH-32J8894 PH-32J8896 PH-32J8897 PH-32J8898 PH-32J8899 PH-32J8902 PH-34J8903 PH-34J8906 PH-34J8908 PH-34J8910 PH-34J8912 PH-34J8914 PH-34J8916 PH-34J8918 PH-34J8920 PH-34J8922 PH-34J8924 PH-34J8926 PH-34J8928 PH-34J8930 PH-35J9003 PH-32

Catalog Number PageJ9004 PH-32J9062 PH-34J9064 PH-34J9066 PH-34J9068 PH-34J9070 PH-34J9072 PH-34J9074 PH-34J9155 PH-116J9158 PH-116J9160 PH-116J9170 PH-116J9180 PH-117J9182 PH-117J9183 PH-117J9184 PH-117J9186 PH-117J9187 PH-117J9190 PH-116J9196 PH-111J926 PH-60J927 PH-60J929 PH-60J93 PH-65J930 PH-60J931 PH-60J9406 PH-35J9408 PH-35J9409 PH-35J9410 PH-35J9412 PH-35J9414 PH-35J9416 PH-35J9418 PH-35J9420 PH-35J9508 PH-35J9510 PH-35J9512 PH-35J9514 PH-35J9516 PH-35J9528 PH-36J9530 PH-36J9532 PH-36J9534 PH-36J9536 PH-36J9538 PH-36J9540 PH-36J9614 PH-35J9616 PH-35J9618 PH-35J9618 PH-35J9620 PH-35J9622 PH-35J9624 PH-35




Catalog Number PageJ9626 PH-35J9636 PH-35J9638 PH-35J9640 PH-35J9642 PH-35J9644 PH-35J9646 PH-35J9754 PH-124J9802 PH-101J9803 PH-101J984 PH-80J985 PH-80J987 PH-80J989 PH-80J991 PH-80J994 PH-80J995 PH-80J996 PH-80J997 PH-80JCA6645.A01 PH-32JCA6645.A02 PH-32JCA6645.A03 PH-32JCA6645.A04 PH-32JCA6645.A05 PH-32JCA6645.A06 PH-32JCA6645.A07 PH-32JCA6645.A10 PH-32JCA6645.A11 PH-32JCA6645.A12 PH-32JCA6645.A13 PH-32JCA6645.A14 PH-32JCA6645.A15 PH-32JCA6645.A16 PH-32JCA6645.A17 PH-32JCA6645.B01 PH-33JCA6645.B02 PH-33JCA6645.B03 PH-33JCA6645.B04 PH-33JCA6645.B05 PH-33JCA6645.B06 PH-33JCA6645.B07 PH-33JCA6645.B10 PH-33JCA6645.B11 PH-33JCA6645.B12 PH-33JCA6645.B13 PH-33JCA6758.H065 PH-88JCA6758.H08 PH-88JCA6758.H10 PH-88JCA6758.H12 PH-88JCA6758.H14 PH-88JCA6758.S065 PH-88JCA6758.S08 PH-88JCA6758.S10 PH-88JCA6758.S12 PH-88

Catalog Number PageJCA6758.S14 PH-88JCA6758.S16 PH-88JCA6758.S18 PH-88JCA7527.B PH-26JCA7527.C PH-26JCA7928.B PH-26JP1520AGP PH-61JP1520GP PH-61JP1530AGP PH-61JP1530GP PH-61JR130L PH-15JR153L PH-15JR172L PH-15JR184L PH-15JR196L PH-15JR360 PH-15JR372 PH-15JR384 PH-15JR396 PH-15JS1520AA PH-61JS1520AC PH-61JS1520AGP PH-61JS1520CC PH-61JS1520GP PH-61JS1530AA PH-61JS1530AC PH-61JS1530AGP PH-61JS1530CC PH-61JS1530GP PH-61L502 PH-87L504 PH-87L506 PH-87P120 PH-127P132C PH-21P132X PH-20P133A PH-21P133AX PH-20P134AXW PH-20P134BX PH-20P135A PH-21P135AXW PH-20P138 PH-20P140 PH-110P140A PH-110P141A PH-127P142A PH-127P143 PH-127P143A PH-127P144 PH-127P144B PH-127P151A PH-21P151X PH-20P152A PH-21P152X PH-20

Catalog Number PageP157X PH-20P294 PH-54P325B-122 PH-111P338 PH-85P345 PH-23P345A PH-23P345D PH-23P345DLT PH-23P345LT PH-23P346 PH-44P350 PH-23P351 PH-23P396 PH-46P400 PH-108P402 PH-108P403 PH-106P403W PH-106P523 PH-49P526 PH-49P528 PH-49P532 PH-49P533 PH-49P535 PH-45P538 PH-45P56 PH-128P56A PH-128P613 PH-44P613D PH-44P619 PH-44P84A-1 PH-128PA155 PH-13PA155A PH-13PA158 PH-56PA166A PH-53PA175C PH-54PA178 PH-52PA192A PH-52PA197 PH-53PA197A PH-53PA271 PH-67PA272B PH-67PA288 PH-54PA292X PH-55PA292X PH-58PA296X PH-55PA319 PH-89PA328 PH-46PA332 PH-51PA333 PH-51PA342 PH-51PA362 PH-48PA400 PH-108PA401A PH-108PA422 PH-55


Catalog Number PagePAT4 PH-95PAX134 PH-50PAX134A PH-50PAX138 PH-50PAX188UB PH-18PAX65C PH-62PAX67C PH-62PAX80 PH-85PGU-210 PH-79PM128 PH-83PM18 PH-83PX122 PH-75PX124-5A PH-75PX124-5B PH-75PX125A PH-75PX125B PH-75PX139 PH-24PX156 PH-67

Catalog Number PagePX171 PH-77PX182A PH-77PX182B PH-77PX187 PH-78PX249AG PH-78PX249G PH-78PX249SG PH-78PX251TS PH-76PX252 PH-76PX254F PH-76PX261 PH-75PX262 PH-76PX262B PH-76PX37B PH-25PX37BLT PH-25PX37D PH-25PX39 PH-24PX40 PH-25

Catalog Number PagePX42 PH-25PX44 PH-45PX77 PH-48PX88 PH-24R1-4A-X PH-98R1-6A-P PH-98R1-8A-P PH-98T1-064C PH-99T1-080C PH-99T1-102D PH-99T1-102X064D PH-99T1-128J PH-99T1-162J PH-99T1-162X102J PH-99T1-162X114J PH-99T1-162X128J PH-99T1-204P PH-99T1-204X162P PH-99



pole line hardware joslyn

Documents