pohtmeric phthalocyanines anjdother electrically...
TRANSCRIPT
Indian JqurnaI of Chemi$tryVol. 33Al June 1994, pp. 506-523
Pohtmeric phthalocyanines anjd other electrically conducting polymers forelectronic and phptonic applications - A review t
S venkafchalam* & V N KrishnamurthyPropellants Polymers and Chemicals En ity, Vikram Sarabhai Space Centre, Trivandrum 695022, India
Re eived 19 November 1993
tion defects such as solitons, polarons and bipolarons are associated with bulk l~lectrical conductivity which is enhanced by doping or photoexcitation 2.12-14.
Organic conjugated polymers are synthesizedeither by direct or by indirect approach. Thedirect approach involves the convlersion of themonomer to polymer by either addition or condensation polymerisation. The indirect route in
volves the preparation of the precursor polymer(either through addition or condensation polymerization), followed by a variety of reactions such aselimination, addition, isomerization, etc. The mostpopular conductive polymer, viz., polyacetylene(PA), is made by addition polymerization of acetylene gas, which is passed through a solutioncontaining Ziegler. catalyst, Ti(OBukAl(Et)3' orLuttingers catalyst, NaBH4 + Co(N03)2 (refs 1517). Depending upon the temperatun~ of polymerization, cis or trans PA can be obtained. Film
Introduc ion
Orga . and metallo organic polymers h ve attracted .de attention for their electrical electronic, onlinear optical, electrochemic andphotoch ..Cal applications 1-11.For poly rs toexhibit e ctrical conductivity, ordered conj gatedstructure with extended pi electrons an largecarrier c: ncentration are prerequisites. The eneralprocess . volves the synthesis of conjugate polymers 1'0 owed by incorporating the re uiredcharge ca rier in desired concentration.
The el ctrical conduction behaviour in1 these
polymers has been extensively studied. Nov I conduction echanisms involving coupling 0 electronic ex .tations to nonlinear conformation havebeen pro osed1.2.4.Dopant induced bond al em a-
Polymers are generally insulators an to exhibit electrical conductivity they must have orderedco jugation with extended pi electrons d large carrier concentrations. This review summarises theva 'ous methods of making conjugated polymers by either addition or condensation H:actions ofrn omers by chemical or electrochemic routes. These reactions can follow either a direct route oran . termediate precursor route, follow by elimination, addition or isomerization reactions. Conjugat d polymers are made conductive ge erally by doping or by thermal treatment. The doped poly ers have limitations like poor stabili y, poor processibility and corrosivity. This review lists theva ous methods adopted for overcomin these drawbacks. The review also gives an account of variou types of phthalocyanine polymers t have been prepared in our laboratory, and their electricalan magnetic properties. The conductivi of these polymers increases by seven orders of magnitudeby ermal treatment. These polymers h ve suitable structures that facilitate solitonic, polaronic andbip laronic conformations leading to I ge, ultra-fast nonlinear optical processes. The peripheralfun tional groups can be used for struc ral modifications to improve processibility and allow fabricat' n of various device structures such as films, channel wave guides, planar wave guides, fibres,etc. The presence of macrocyclic structu es in these polymers imparts mechanical, thermal and enviro ental stabilities. Conjugated polym rs, including phthalocyanine polymers, also exhibit nonli
optical properties because of their esponse to high intensity radiations like laser. The require-ts of organic molecules and polymer to have x(2) and X(3) properties, and the various methods
to study their behaviour as well as techniques employed to improve the nonlinear optical rese are also discussed. The various ethods that have been used to synthesize ladder polymerssolubilisinggroups for processibility ve also been discussed.
t A part ias presented at the US-India workshpp on"Frontiers a Research on Polymers and Advanced Materials"held at Goa, anuary 5-10, 1992.
I
VENKATACHALAM et aL: ELECfRONIC & PHOTONIC APPUCATIONS OF POLYMERIC PHTIIAWCYANINES 507
Ar • %-{O)-, @,l10-@-0Ei, ~(II)
PolY-Jrphenylene has also been synthesized viapoly.merisation of soluble derivatives of 5,6-dihydroxycyc1ohexa-l,3-diene, which is prepared bybacterial oxidation of benzene. These derivatives
are polymerised using free radical initiators togive soluble precursors, which on thermolysisyield polY-Jrphenylenes as shown in (ill) (ref. 25).
Methods of doping organic conducting polymersThe conjugated polymers are made conductive
by doping which is carried out through chemicalroute, electrochemical route, or photochemicalroute. Doping reactions are characterized bycharge transfer from the dopant to the polymer orvice versa. An ionic state of the polymer, delocalised along the backbone, is formed with a counterion derived from ,the dopant. Conductivity ofthe doped material is varied and controlled by theamount of dopant used. Polymers such as polyacetylene (PA), polyphenylene (PPP), polyphenylene sulphide (PPS), polypyrrole (PPy), polythiophene (PI') and polyqpinolene (PQL) are dopedby either chemical or electrochemical means andconductivity ranging from 1 to 2000 SI cm hasbeen achievedI9.26-35.Stretch orientation of dopedpolyacetylene has improved the electrical conductivity to values above 105 S/cm (ref. 36). Highlyconjugated polyparaphenylene (PPP) has beenshown to have a conductivity of 104 S/cm (ref.37).
In electrochemical doping, the polymer to bedoped is used as one of the electrodes in an electrolytic cell in which the electrolyte contains theion for doping. For p type doping, the polymer isused as anode, while for n type doping the polymer acts as cathode. The degree of doping dependson the dopant concentration, voltage applied andthe amount of charge passed.
Polymers that become conductive upon doping
•
R.IoW, OMe, Ph
'''>0' + ~~."o,ClII)
FJ)-::{FJFJ c-C!!C-CFJ ®+ +
F:JC_ CFJ FJC_CFJ
01-~:-g~~N~.tio!,~- tf::rc I co, ••
\JVV(J)
thickness can be controlled by the pressure ofacetylene gas, time of reaction and amount of catalyst usedI8.19. The electrochemical route givesconjugated polymers as peelable films on an electrode surface. It offers precise control on thethickness and electrical conductivity of the film,which is effected by varying the current density,solvent, supporting electrolyte, nature of electrolytes, etc.20. Other conjugated polymers like polY(Jrphenylenes) (PPP), polyphenylene sulphide(PPS), polyquinolenes (PQL), and ladder polymersof the benzimidazo benzophenanthrolene (BBL)type are prepared by condensation polymerization21. The polymers made by either addition orcondensation routes via chemical or electrochemi
cal polymerization techniques are intractable, andhence efforts are now concentrated on the preparation of melt and solution processible polymers with minimum defects and a high degree ofchain alignment. One of the most innovative anduseful techniques for the preparation of conducting polymers has been the synthesis of highly soluble precursor polymers, that can be easily handled in solution, purified and then later convertedto th6 less tractable conducting polymer. The firstexample was the dehydrohalogenation of polyvinyl chloride (PVC)22. This reaction, like most elimination reactions on polymers, rarely goes tocompletion. The Durham route to polyacetylene(PA) developed by Feast et aF3 involves metathesis polymerization of Diels Alder adduct ofcyclooctatetraene and substituted acetylene togive a soluble and thermally unstable polymerprecursor. This undergoes retro-Diels Alder reaction slowly at room temperature or more rapidlyat 80°C, yielding amorphous PA eliminating asubstituted benzene as shown in (I) (ref. 23).
By choosing the appropriate monomers, retroDiels Alder reaction can be controlled.
Poly(phenylene vinylene) (PPV) has been synthesized24 via a soluble precursor route, yielding theproduct via the elimination of HCI and dimethylsulfide as shown in (II).
508 INDIAN J CHEM, SEe. A, JUNE 1994
can be lassified into two categories38. T e firstcat(:gory is that in which polymers form simplecharge t ansfer complexes with donors or cceptors, e.g. PA doped with Na forms n-typ semiconduct r or PPP doped with AsFs forms p-typesemi con uctor. These polymers are useful or application where variable conductivity is eded,i.e., the: olymer is used both as a conduct r andas a no -conductor. The switching of n -conductive ate to conductive state is reversi Ie and
this is c ntrolled by the amount- of dopant . Thisphe:nom on is made use of in secondary atteries, vis displays and variable trans .ssionshields .. his category of polymers is charac erisedby broa valence band and low ionisation otential for -type conductors and by broad c nduction ban and high electron affinity for n-typeconduct rs. In the second category, the po ymersbecome highly conductive due to format on ofnew cov lent bonds either during the dop' g process or uring other treatment. When poly henylene sUlIde is doped with AsFs, the latter introduces iC alent bonds or crosslinking in a ditionto partia oxidation. The polymer undergo s irreversible hanges during the doping proces . Thepolymeri ation energy decreases and the bandwidth in reases on doping. While these po ymers 'are not uitable where doping/dedoping rocessis requir d for specific applications, they an beeasillypr cessed.
Photo hemical doping calls for a co poundwhose p otoproducts are effective dopan , e.g.,diaryl ilo onium salts39, which on photolysi yielda proto acid which serves as a dopan. Themethod selective; specific parts of the p lymercan be oped. In most of the doped po mers,solitons ( adical ions) or polarons form the hemical basi for their electrical conductivity as inother mo ecular metals 16.
Most f the doped polymers have cert' limitationsl,211.13,14.16:(i) they exhibit stable con uctiv-ity only s long as the dopants remain in t e system, (ii) opants often migrate out of the ulk ofthe poily er over a period of time and th conductivilty of the polymer varies with the v .ationin lthe d pant concentration, (iii) the dop d polymers ave poor stability against heat, light,moisture and air, (iv) some of the dopants "ke 12,AsFs, N , S03 are corrosive, and (v) the dopedpolymer have poor processibility and sho metalto semic nductor transition (Peierl's instabi ity) atlow tern ratures.
T hermall treatment of polymersThermkl treatment is also a method which IS
used for the improvement of electrical conductivity of polymers4o-48. This method appears to beadvantageous, as conductivity can be controlledby varying the conditions of treatment. These systems have excellent stability towards environmental conditions such as heat, light, moisture and air.Improvement in electrical conductivity occurs dueto the build-up of ordered polycondensed rings,allowing charge transport through charge-hoppingand tunnelling between aromatized rings. Thesecharge carriers are generated through formationof radical defects during the heat treatment.These materials show good thermal stability andstable conductivity and may find potential applications in the fabrication of devices and as matrix
materials for advanced composites49,so. Althoughthey show large improvement in thermal properties and electrical conductivity, most of these polymers have poor processability.
Improvements in processibilities of conductingpolymers
Various attempts have been made to improvethe environmental stability of the doped polyacetylenes and its copolymers through external protection of the polymer by encapsulation in oxygenbarriers such as glass, silicone rubber, polyethylene, polyurethanes, epoxy resins and poly-p-xylylenes1-ss. The stability of conducting polyacetylenes and substituted polyacetylenes has alw beenimproved to a limited extent by the use of classical antioxidants such as phenols and hinderedaminesS6-S8.
The choice of counter ion (anion or cation) hasa major effect on the stability of conducting polymersS9-63,in addition to its effect on mechanicalproperties. In air, the perchlorate and tetrafluoroborate salts of polypyrrole decompose and loseconductivity above ISOaC, but polypyrrole-ptoluene sulfonate salts remain stable up to 280aC.The electro-polymerization of pyrrole in aqueoussolution, in the presence of sulfonated cobaltphthalocyanine, form highly tractable films whichexhibit better stability in air as compared toperchlorate doped material. The conductivity ofthe composite increased from 4 to 400 S/cm during 2 months of exposure to air64. Pyrrole hasbeen polymerized in the presence of the sodiumsalt of metallophthalocyanine polymer which exhibits stable electrical and electrochemical properties6s.
Electrical conduction requires conjugated structure, but this in turn makes the chain rigid and insoluble. The insolubility makes the polymer difficult to purify or properly characterize. Hence the
"
/
I
VENKATACHALAM et al.: ELECTRONIC & PHOTONIC APPUCATIONS OF POLYMERIC PHTIIALOCYANINES 509
interest is in making soluble conducting polymers6Sb.
The major requirement for making useful gadgets out of conducting polymers is to make themtractable. Some of the approaches that are adopted for this purpose are66:
(i) the preparation of blends, dispersions andcomposites, (ii) the synthesis of random, graft andblock copolymers, (iii) the use of precursor polymers that can be converted to conducting polymers by thermal and reactive treatments and,(iv) the use of solvents like molten iodine andAsFs-AsF3, that render some of the conductivepolymers soluble.
Polypyrrole films formed in the presence of ptoluene sulfonate in acetonitrile gave a flexiblepolymer. Pyrrole electro-polymerized in the presence of a sulfonated styrene and hydrogenatedbutadiene yields a flexible polymer that can bemelt-pressed to form conducting polymerplaques67. Dodecylsulfate anion doped polypyrrole renders flexible conducting films with tensilestrength of the order of 10 MPa (ref. 68).
Polymer blending or alloying is yet another approach to processible polymers. This can beachieved either by chemical or electrochemicalmeans. For example, suspensions of polypyrrolehave been prepared by chemical polymerizationusing ferric chloride in an aqueous solution of ahigh molecular weight polymer such as methylcellulose or polyethylene oxide. They are used formaking polymer composites used in all polymersecondary batteries69.
Another technique for preparing soluble derivatives of intractable polymers is to add solubilisingsubstituents to the monomer. Thus, insoluble polyphenylenes have been rendered soluble in common solvents such as chloroform by suitable substitution on the phenyl ring. They are renderedwater soluble by introducing carboxyl terminals 70.Chemical and electrochemical polymerization ofN-substituted pyrroles gave polymers of substantially lower conductivity as compared to that ofunsubstituted polypyrrole7l. Substituted pyrrole orthiophene having alkyl or alkoxyl group substitutions at 3 or 4 positions gave soluble and processible polymers7l-73. But long alkyl groups at the 3or 4 positions reduces the conjugation length· andhence the electrical conductivity due to stericeffects74,7s. Dialkoxy substituted thiophene vinylene copolymers in which the vinylene units act as"spacer" to reduce steric interactions of substituents show improved processibility and electricalconductivity. The doped polymers are also transparent16,77. By incorporating sulphonic or car-
boxylic acids in the alkyl substituent of the 3-alkylthiophenes, water soluble thiophenes havebeen prepared with excellent tractability and conductivity78. To obtain highly conducting substituted polyheterocycles, an alkyl spacer is used tosuppress electronic inductive effect of the heteroelements and avoid the effects of steric hindrance
of the bulky groups on polymerization and conjugation in the macromolecules79. Polypyrroles.withenhanced redox reversibility by substitution ofpoly ether chains at 3 position have been synthesized80. Bipolymer complexes of polyethers andother conjugated polymers like polypyrro1e andpoly 3-methylthiophene are useful in sensors andactivators lOb.
P hthalocyanines and their propertiesPhthalocyanines and their polymers are known
to have highly aromatic structures and excellentstability against heat, light, moisture and air.Moreover, they are soluble without decomposingin strong acids. Hence, they have attracted a greatdeal of attention in the search for environmentallystable electrically conducting materials8l-8S. Theelectrical conductivity in these materials is associated with thermal or optical excitation of mobilepi electrons from the valence band containing thehighest occupied molecular orbitals to the conduction band containing the lowest unoccupiedmolecular orbitals86,87.
Simple monomeric phthalocyanines are insulators and they form stable and highly conductivecharge transfer salts when partially oxidised withiodine88. In these compounds the phthalocyaninato ligand (dianionic ligand) forces the centralmetal atom in a square planar configuration. Thehighly conductive material is built up of stacks ofmetallophthalocyanine units and chains of polyhalide anions, e.g., nickel phthalocyanine forms acomplex with iodine whose formula is written as(NiPc)O.33+(13)°.33(ref. 89).
The single crystals of this compound show metallic conductivity, i.e., dol df is negative. In mostof such compounds the electrical conductionoccurs mainly through overlap of pi orbitals alongthe stacks of the ligands88. Martinson et al.90 haveshown that in partially oxidised cobalt phthalocyanine (CoPcIx), the conduction pathway is throughmetal-metal overlap, similar to that in Krogmansalts9l, where electron delocalisation occurs alongthe overlapping dz' orbitals of closely packed Ptatoms (Pt-Pt 2.9A) in the Pt(CN)~- chains . .TheCo-Co spacing is 3.12 A (ref. 89). This type ofone-dimensional conductors is different from simple organic charge transfer complexes92, in which
510
--~-~-~---------~-- ~---- -._"c_co_-_---~~.~_- -----~ l'
INDIAN J CHEM, SEe. A, JUNE 1994
strong electron donors, such as tetrathiofulvalene(TTF), are combined with strong electron acceptors like tetracyanoquinodimethane (TCNQ). Inthe latter, the transfer of electronic charge fromthe donor to the acceptor results in the formationof cation and anion radicals, which stack togetheras alternating columns within the crystal. Theoverlap of pi orbitals along these columns of radical ions causes their electrical conductivity. Theelectrical conductivity is very sensitive to thepresence of impuritie~ in the system93. At lowtemperatures these charge transfer complexes including partially oxidised metal10 macrocycliccompounds and doped conjugated polymers undergo metal to semiconductor transition (Peierl'stransition)28. This phenomenon is common to allone dimensional conductors.
Phthalocyanine polymersMonomeric phthalocyanines are generally pre
pared by heating aromatic ortho-dinitriles or aromatic anhydrides in the presence of metal or metal salts, urea and catalysts85,94.When the reactionis carried out with aromatic tetranitriles or dian
hydrides such as 1,2,4,5 tetracyanobenzene(TCNB) or pyromellitic dianhydride (PMDA) instead of the difunctional dinitriles or anhydrides,polymeric phthalocyanines are formed95-lOo• Thestructural uniformity of the polymers obtained de-
pends on the reaction conditions and the methodof recovery of the final polymer8!.
There are several types of phthalocyanine polymers (Fig. la-d). Some ofthem are listed below:
1. Polymers in which benzene rings of phthalocyanine moieties are joined through one bond asin biphenyls!O! and biphenylenes (Fig. 1a & a').
2. Polymers in which monomeric units are joinedthrough substituents on benzene rings42,46,102.103(Fig.1b).
3. Those in which benzene rings of neighbouringphthalocyanine moieties are shared in common94,95,98,99(Fig. 1c).
4. Those in which phthalocyanine rings are connected through atoms or ligands at the centralmetal atom, as washers threaded on to a shaft(bridge stacked polymers)!04-!08(Fig. 1d).
5. Those in which phthalocyanine compounds arebonded to polystyrene or its copolymers8!,!09.
The conductivity of different types of phthalocyanine polymers are given in Table 1. FromTable 1 it is obvious that the electrical conductiv
ity of the polymeric phthalocyanines is higherthan that of unsubstituted monomeric phthalocyanines. This is probably due to the increase in extent of conjugation in the polymeric phthalocyanines which causes intramolecular charge transfer.Polymers of Type 2, in which phthalocyanine mo-
I-V",-I
\
r~--r-'II
R' -C=N-C=N-
S -Sf0~H
R -@-o-@-N N
N ~ N R, -@-s-@--a)N¢cr =G¢N-~-N~
v & ~ ~N-M-N
, '-S:
"" t QR,~=CH -@-CH:NH-
NpN 1t0IIR.-c-
(a)
(.1') (b)
(c) (d)
Fig. I-Types ofphthalocyanine polymers [a. Type I; b. Type 2; c. Type 3; d. Type 4]
".<'",.'~.-
VENKATACHALAM et at.: EIECTRONIC & PHOTONIC APPLICATIONS OF POLYMERIC PHTHALOCYANINES 511
Compound
Table I-Electrical conductivity of polymeric phthalocyanines
Type Electricalconductivity
(S/cm)
Ref.
Copper phthalocyanine Nickel phthalocyanine
Polymeric copper phthalocyanine
Poly (copper octacyanophthalocyanine)
Polymer of bis-phthalonitriles (Thermally treated)
Poly copper phthalocyanine
(i) with cyano end groups
(ii) with COOH end groups
Monomeric (phthalocyaninato silicon) dihydroxide. PcSi(OHb
Polymeric (phthalocyaninato-l-siloxane). (PcSiO)n
,u-Cyano(phthalocyaninato cobalt III)
Octacyano copper phthalocyanine
Monomer
Polymer type 1
Type 2
Type 2
Type 3
Type 3Monomer
Type 4
Type IVMonomer
10-11_10-15
2 X lO-K
6xlO-7
102
10-2
10-3
6 x 1O-~
3xlO-7
4 X 10-2
2 X 10-2
88101
46
41.42
124
124
124
124
108
124
ieties are connected through groups such as-CN -COOH and -C-(N), , H
oo~ -CH~N-CH-
-@-s-@- -C-N-o.N-( IV)
show large improvement in conductivity on heating41,42,46.110-112.
Poly(copper octacyanophthalocyanine )46 inwhich phthalocyanine moietiesl are connectedthrough conjugated - C =N - C =N - linkages(Type 2) has a conductivity of 10-7 S/cm. This increases by 8 orders of magnitude (10 S/cm) onheating, due to formation of conjugated networkstructures through opening of peripheral cyanogroups.
Polymers of Type '3, that are prepared by heating pyromellitic dianhydride with metal salts, formsheet-like structures13 and have conductivitiesmore than those of monomeric ones. The conduc
tivity in polymers prepared from tetracyanobenzenell4 is due to simple thermally activated hopping between adjacent sites and varies approximately as the square root of the applied pressure.The metallised polymers have higher conductivitythan the unmetallised ones. Similar to monomeric
phthalocyanines, polymeric phthalocyanines showimprovement in electrical conductivity on dopingwith iodine115. In the latter case, however, the improvement in conductivity is only by 2-3 ordersof magnitude as comparoo to monomeric phthalocyanines which show in conductivity of the orderoften on doping!l8.
The conductivity of doped phthalocyanine po-
lymers depends on the nature of stacking of donor and acceptor units, their orientation and theirrepeat distances. Hence, the nature of stackingand the crosslinked structure of the polymericphthalocyanine system are likely to introdu~emore randomness leading to lower conductivities 115.
Polymers in which neighbouring phthalocyaninerings are cofacially stacked through substituentatoms such as F, a or ligands such as - C == C - ,- C == N -, pyrazine, 4,4'-bipyridine, l,4-dicyanobenzene attached to the central metal atom(Type 4), show large improvement in electricalconductivity on doping28.84,85,108.116.Hanack etat.108 have shown that cofacially stacked polymersof Fe, Co, Ru pthalocyanines through ligands suchas pyrazine, 4,4'-bipyridine and 1,4-dicyanobenzene show both metal and phthalocyanine centered electrical conductivity. These polymers inwhich phthalocyanine moieties are joined throughSi - a- Si linkages with metal-to-metal distanceof 3.33 A has a conductivity of 10-7 S/cm, whichimproves to 1 S/ cm on doping with iodine due toformation of segregated stacks of metallomacrocyclic cations and parallel arrays of polyhalidecounteranions. In these metallomacrocyclicpolymeric conductors, the pathways of conduction is through the pi system in the ligand columns. The conduction band of the partially oxidised (PCSiO)n is composed of carbon P:n: orbitalslocated near the macrocyclic core117,1l8.It hasbeen shown that there occurs minimal mixing between carbon p" orbitals and Si or 0 orbitals inthe highest occupied molecular orbital and theSi - a units do not play any direct role in theelectronic conduction 117-119.Variable temperatureconductivity data in these systems have been fit-
512 INDIANIJ CHEM, SEe. A, JUNE 1994
ted! to fluctuation induced tunnellin~ model
which is based on tunnelling between sm I metalparticle in an insulating mediuml20. The ode! isconsiste t with inhomogeneous nature of dopingin these ystems.
Theo tical studies on the bridge stacke metallopthal yanines have shown that when th bridging gro p is an atom e.g., 0, F and the centralmetal i the macrocycle is a non-transitio metal,e.g., .AI, Si, the inter-ring spacing deter nes theband st cture. Both overlap and inter-ri g spacing ar,e so important for atom bridged p lymerswith a on-transition metal atom in the acrocycleo For diatomic and polyatomic bridging groups,e.g., == C - , - C == N, pyrazine, th bandstructur is determined by the overlap 0 the dxz
and dyz orbitals of the metal and the pi or itals ofthl~brid ing ligand 121.
Th(~s materials have been incorporate~in high
strengt polyaramide fibre, e.g., Kevil', anddoped efore and afteJ: extrusion to .eld air
stable onductive fibres which demonstr te conductivi es upto 5 S/cm with metal-like p operties(i.e., do. dTis negative)122,123.
Repl cement of the central silicon ato s by Geor Sn c uses increase in metal-metal dista ce, andhence ere is decrease in electrical con uctivitydue to diminishing of the intramolecula chargetransfe 120.124.These doped bridge-stack d polymers I' tain their electrical conductivities only aslong as the dopant molecules remain in the system. L e all other one-dimensional co ductive
polyme s these polymers also are predict d to un-
..•
t'
8.82x 10-5No signal8.0
Polymer IA
PolymerIB
Polymer II A
Polymer II B
Polymer III A
Polymer III B
Table 2- Electrical conductivity, ESR line'width and magneticsusceptibility Ofphthalocyanine polymers at 298 K (ref. 112)
Polymert Electrical Peak to pe:ak Magneticconductivity linewidth. susceptibility
(S/cm) (mT) (emu/g)
9.8 x 10-6 7.0 5.00 X 10-6
8.0xlO-' 15.0 1.80 x 10-5
4.0 x 10-7 3.0 - 3.12 X 10-7
2.33 144.0 3.12 x 10-4
2.0 X lO-H 90.0 4.6 X 10-5
il'l'I'" , '''''!Ilfll~I''illllll, II I"'ill
tPolymer lA, IIA, and IlIA contain Cu, Ni, and Co respect
ively as the centra] metal atoms. Polymer IB, IIB and IIIB
represent the corresponding heated samples.
Thermal and chemical refinements of electricaland magnetic properties of polymeric phthalocyanines
In our laboratory different types of polymericphthalocyanines have been synthesised and theirelectrical conductivity improved by effecting refinements in the polymers via thermal and reactive treatments 110, l12125,126.Polymeric phthalocya-nines containing Cu, Ni and Co in which benzenerings are shared in common with macro cyclicphthalocyanine rings (Type 3) containing peripheral COOH groups have been prepared(Fig. 2). Thermal treatment of these polymers results in increase in the number of charge carriersand extended conjugated structures through decarboxylative polymerization reactions of theterminal COOH groups. The Co polymer exhibitslarger conductivity (10 S/cm) than the Ni and Cuanalogues. The ESR line width, magnetic susceptibility and electrical conductivity of the phthalocyanine polymers before and after thermal treatment are given in Table 2 (ref. 112).
dergo metal to semiconductor transition at lowtemperatures 120.
The metal to semiconductor transition in mostof the one dimensional system can be overcomeby improving interchain interactions. Such interactions in phthalocyanine polymers would be favoured by introducing electron-withdrawing substituents such as cyano group in the phthalocyanine rings. These substituents improve interchaincharge transfer, e.g., low molecular weight octacyanophthalocyanines show high electrical conductivities of the order of 10 - 1 51/ em (Table 1)due to intermolecular charge transfe:r124.
eOOH
eOOH
eooH
eOOH
''''11'1 i""", I
Hooe eoOH Hooe eOOH
,~, ,-8.,N¢C¢N
t """ "'>: •• .....-",=:,
N-M-N N-M-N""'-~
N~~: # NS~11'#~ ;) ~
N N N" N
~ ),¢C¢""" ~ /"'"N-M-N N-M-N
,~>,h ,-&'1U UHooe eOOH Hooe eOOH
Fill!.2-Structure of metallophthalocyanine olhiomers[M = Cu, polymer IA; M = Ni, polymer II
M = Co, polymer IlIA]
Hooe
Hooe
Hooe
Hooe
VENKATACHALAM et of.: ELECTRONIC & PHOTONIC APPUCATIONS OF POLYMERIC PHTHALOCYANINES 513
In the heated polymersl1o.ll2, the ESR linewidth decreases with increase in temperature, asin the case of lightly doped polyacetyleneI27.128.The magnetic susceptibility of these polymers exhibits Curie-like behaviour 110.112,similar to polarons, bipolarons, solitons, etc.127-132in doped conjugated polymers like PA and PPP. The variabletemperature study of ESR line width and intensityof the ESR signal width helps in understandingthe nature of the charge carriers and confirms thepresence of spinless dipolar charge carriers in thesysteml10-112.
The three-dimensional octacyanophthalocyaninato polysiloxane polymer (Fig. 3), on thermaltr~atment causes both lateral overlap of pi orbitals through formation of poly condensed ringstructure via opening of terminal cyano groups,and, longitudinal overlap of phthalocyanine orbitals via formation of more Si - 0 - Si linkages 111.The bond-alternation structures are also shown in
Fig. 3. Polymers possessing locked-in ladder typestructures have also been prepared by condensingthe terminal carboxyl 'groups of polymeric phthalocyanines with aromatic orthlrsubstituted tetraamines 125(Fig. 4). The electrical conductivity andmagnetic properties as well as ESR behaviour indicate the presence of spinless dipolar charge carriers. ESCA measurements on the phthalocyaninepolymers before and after heat treatment also in-
JI
fi> ~ ~ ~ Phas~Bu"",,~hN N N N N N N
A
dicate the formation of extended conjugatedstructures. The binding energies for N and metalsshift to lower values in the heat-treated phthalocyanine polymers indicating the formation of extended conjugated structures in the latter.
Although thermal treatment imparts large stableconductivities, the rigid structure of the resultingpolymers makes them poorly processable. Henceattempts have been made to incorporate thesepolymers in a suitable polymer base such as polyimide, polyamide, polypyrrole, etc., by chemicalor electrochemical means to obtain composites ofimproved electrical and electrochemical behaviour64,65,SI.Li and Guarr133 have electrochemical
ly prepared thin films of tetraamino metallophthalocyanines. Since the prepolymer containingCOOH groups is soluble in polar solvents likedimethylacetamide, it can be incorporated intoprocessible polymers capable of forming films,e.g., polyamic acid of N,N'-p,p'-oxydiphenylenepyromellitimides2. The polymeric copper phthalocyanine containing peripheral carboxyl groups hasbeen converted into the corresponding polyimideby condensing the anhydride of the latter with4,4'-diaminodiphenyl ether in our laboratory 134.The electrical conductivity of the polymer improves (10 S/cm) on heating to 520°C in vacuum(10 mT). This method, thus yields coatings basedon polymeric phthalocyanine, which could find
Fig. 3-Bond alternation structures of (octacyanophthalocyamnato polysiloxane) polymers (C.j()HHNI6SiOln
514 INDIAN J CHEM, SEe. A, JUNE 1994
n
1,#
Fig. 4-Structure of metallophthalocyaniqe polymers containing pyrrone typc ladder moieties 1M= Cu, Ni J
..~
applicatlion in the prevention of elechostaticchargllnt; of spacecrafts and rockets.
NLO roperties of organic materials and conducting polymers
The evelopment of new nonlinear optic 1(NLO)materia s which allow frequency multiplica ion andmixing f UV-vis-IR radiation for laser a d electro-opti s applications (optical processi glcomputing, mage analysis, switches, modulat rs), hasbeen e tended to conjugated polymers -6,135-137,
HigWy elocalized pi electron systems ot onlyexhibit arge electrical conducivity but al 0 showlarge n nlinear optical effects, which ma e themuseful aterials for photonic application . Organic co jugated polymers exhibit photo- nducedabsorpt on, bleaching and photolumi escencewhich ccur in picoseconds 18. This imp 'es thatphoton absorption by these polymers causesstructur I distortions in the system due t whichmajor ifts in oscillator strengths occu withinpicosec nds.
Nonli ear optical properties originateT p'marily
due to he response oJ a dielectric mate 'al to astrong lectromagnetic field. Polarizatio is induced the electromagnetic field. The larization res onse of a molecule is given by
~ = ajjEJ + /3ijkEJEk + YijklEjEkEJ +where a, /3, Y, etc. are tensor quantities relatingthe induced polarization vector components ~, tothe appropriate field components, and where Ej,Ek, etc. and i,j,k and I refer to the molecular coordinate system. a,/3, Y, etc., are also called molecular hyper polarizabilities. The odd-order rankedtensors such as /3 require that the molecule providing the response has no centre of inversionsymmetry; otherwise its contribution to the induced polarization is zero in the dipole approximationI37,l3H. Molecules with low-lying chargetransfer states of the appropriate symmetry cangive v~ry large /3. In general molecules exhibitinglarge /3have the structure (V).
(V)
where D and A are electron donating or electronaccepting substituents that provide a substantialcharge-transfer resonance interaction through thearomatic ring. Approaches to increasing the /3 ofcompounds, include placement of strong electrondonor and electron acceptor groups at oppositeends of a conjugated electron system and incteas-
VENKATACHALAM et al: ELECTRONIC & PHOTONIC APPliCATIONS OF POLYMERIC PHTHALOCYANINES 515
ing the conjugation length139-141.Examples are2-methyl,4-nitroaniline (MNA) (structure I) andazodye disperse Red (structure il) as shown in(VI).
Katz et al142 have introduced the use of cyanovinyl electron acceptor groups and dithiolylidenemethyl electron donor group. Polarization inducedin bulk media (liquids and solids) can be expressed by the following expansion:P,=x(1)E+X(2)EE +x(3)E·E E
1 ) ) k J k I
where the coefficients x(n) have meanings similarto their molecular counterparts but are scaled tothe properties of the medium. Construction of abulk material possessing a large bulk susceptibilityrequires not only molecular constituents withlarge microscopic susceptibilities, but also a noncentro symmetric system where the orientation ofthe molecular species results in constructive additivity of p. A number of approaches to constructbulk materials with large nonlinearities areknown. These include crystal engineering, LB filmpreparation, electric field poling of polymeric systems, development of molecular composites andaggregates and the preparation of fibres with crystalline organic materials on the corel43. Crystalengineering approaches for NLO materials sufferfrom inherent difficulties. For example, symmetryand orientation of molecular units within the unit
cell affect the noncentrosymmetry of the system.Noncentrosymmetric organization of the molecules can be achieved by techniques such asLangmuir Blodgett (LB) technique, guest hosttechnique and side chain liquid crystalline polymer techniqueI44-146.
The LB technique is one of the well-knownmethods available for manipulating the architecture of an assembly of organic molecules. It maybe regarded as an organic analogue of molecularbeam epitaxy, which is extremely important tosolid state electronics as a means of fabricatingprecise micro structures with novel transport properties. The LB technique offers the means toconstruct one organic mono layer at a time withprecise geometries (molecular orientation andthickness). Very few materials are suitable for LBfilm formation aftd these molecules contain both
hydrophobic and hydrophilic end groups such aslong alkyl and carboxylic groupsI44-146.One prob-
lem with LB films in optical applications is thatthey are not ttuely single crystalIine materials andthis limits applications in nonlinear and guidedwave optics.
NLO of poled polymers and side chain liquidcrystalline· polymers
In the guestlhost method, the NW compound(guest) under investigation is dissolved in a polymer host and spm coated on a substrate. TheNLO polarizable molecules are oriented by applying a DC electric field across the polymer just be
low its glass transition tempe.ratu~~ (1) to givelarge molecular hyper polanzability14 -149. Thepoling can be effected by contact or corona poling. Stability of the polar orientation after coolingthe polymer well below the I;, depends on thepolymer used and the methods used for increasing the degree of polar orientation. NLO effectsare obtained when the medium is illuminated by avery intense laser beam. The advantage 'of such asystem is that it can be manufactured in differentshapes-cylinder, fibres or films. A typical example is the field induced alignment of the azo dyedisperse Red I in PMMA. Using disperse redmolecule number density of 2.74 x 102°/cm3, thesystem gives a X(2) of 3 x 10-6 esu at a polingfield of 0.6 x 106 VIcm. This value agrees with thetheoretically predicted valuel45. The guest-hosttechnique suffers frtlm limited solubility of activespecies in host polymer which lowers the achievable level of NLO properties. In addition to these,problems such as phase separation, nonuniformityof dispersion and evaporation of the active species also exist. Many of the above difficulties areremoved when the NLO active species are chemically attached to polymer chains, e.g. the guestmolecule Red dye I is attached to the monomerMMA and then copolymerized with MMA145.Theresulting polymer is poled just above its I;, andthen cooled in its polar orientation. This technique allows incorporation of high concentrationof active moiety in the system. If the concentration is increased, higher X(2) values areobtainedl45. It can be manipulated by various processing techniques into different shapes, sizes anddegree of orientation and would enable the use ofthese materials for many devices and applicationsof second order NLO phenomena. Moreover,their long relaxation times can be utilized tomaintain the desired structure at ambient temperature for an indefinite period 145,150,151.
Due to the tensorial character of NLO coeffi
cients, alignment and the extent of noncentrosymmetry of NLO moieties in NLO materials are cri-
In additi n, as polymers these materials als possess glas transition temperature and hen e themolecuIa order for a given phase may be rozenfor use vel' a wide range of temperatur . ForNLO ap lications side chain polymers a e favoured b cause of their high orientational order
in the melt phase. Utilizing slow relaxation characteristics of polymers, different NLO characteristics, viz., unoriented X(3) material, oriented X(3)
material by cooling an aligned smectic A structureand oriented X(2) material by poling under a highelectric field, of the sample can be obtained. Lowconcentration of dopant is dispersed in a nematicliquid crystalline thermoplastic polymerl52. Thepolymer should show nematic behaviour above ~in addition to it being homogeneous and alignablein an external applied field 150,151.The sample isheated to nematic regions and an electric field isapplied producing axial alignment of the nematicmedium. The dopant molecule is now in an anisotropic environment and its degree of alignmentwill be determined by the superposition of thealignment field Ed on the anisotropic potential ofthe mediumI50,152. In yet another approach, largenonlinear optical properties are found in molecules covalently bound in a polar polymer chainin an otherwise isotropic mediuml5o. In this approach, extended polymer chains are treated withnonlinear chromophores as part of the repeatunit. For example, polybenzyl-y-glutamate (PBG)dissolved in a helix forming solvent and subjectedto an electric field forms a rigid extended helixand has a large dipole moment owing to theasymmetric placement of repeat units in the rigidpolymer chain. Hence it shows total field inducedpolar orientation at modest field strength. The f3
for the monomer repeat unit is 2 x 10 - 31 esuwhile" for the individual chains it is 500 x 10- 30esu. It is therefore possible to have a moleculardesign approach in which polar polymer chainswould contain a repeat unit of a chromophorewith large and permanent field induced polaralignment of polymer chains.
Importance of ladder polymers and phthalocyanine polymers for NLO applications
In view of the large electron displacement inconjugated electron system, -the conjugated
H polymers offer better nonlinear properties thanc 3 the current inorganic systems like LiNbO 3 KH 2
P04 (KHP) and III-V semiconductors GaAs orInSb (ref. 5). In addition to their large architectural flexibility, conjugated organic polymers havebeen valued for their ultra fast switching times,third order NLO susceptibilities and high opticaldamage thresholds4-6. Among the conjugatedpolymers, polydiacetylenes (PDA) are one of themost extensively studied polymeric systems because of the processibility and capability to exhibit phase transition in the solution stateI53-156.Since various changes are possible in its backbone
INDIAN rrCHEM, SEe. A, JUNE 1994
( VII)n.2.3.5.qa.l'.12
516
tically . portant for maximizing the N 0 response .. or example, the value of X(3) for an unoriented polymer containing long axially s mmetric NLO unit is increased by a factor 0 5, byorienting all the NLO units along the same .s152.Unorient d polymers are by definition cent osymmetric d have no X(2) properties, here asorie:nting high f3 moieties in the same di ectionproduces high X(2) values. Thus, by con troll ng theorientati n and symmetry of polymeric m terialsdifferent pes of NLO responses can be I' alized.The liqu' crystalline polymer chains are pic allycompose of three parts: backbone, side chainspacer g oups and mesogens. Intermolec ar interaction between the mesogens, and to a lesserextent, tween spacer groups results in mesophase j[o mation in the melts of these po mers.The: fun ion of the spacer group is to de ouplethe side hain motion from that of the bac bone,since ot rwise the latter will affect phase stability. The requirements are the same as t at required f I' mesogens in a liquid crystallin polymer for highly active NLO molecule. Hen e onecan use LO molecules as mesogens while maintaining t e other molecular structure unc ged.By ap1'r priate manipulation of the bac bone,spacer a d NLO group, a variety of meso hasescan be I' alized in these polymers. Nemati , cholesteric, ectic A and smectic C have be n observed in side chain liquid crystalline poly ers152.The folio ing types of side chain liquid cry tallinepolymers represent some of the systems th t havebeen stud ed151,152(VII).
"iI! , I i! 'I,1111I 'I~ HUllIIll.m liIIllill I kdilill
VENKATACHALAM et al.: ELECTRONIC & PHOTONIC APPLICATIONS OF POLYMERIC PHTHALOCYANINFS 517
structure a number of substituted PDAs have
been studied 157.Recently a number of other conjugated polymers including poly thiophene, polyaniline, and poly(phenylene vinylenes) have alsobeen examinedI58-161.
The X(3) values for the present day electro activepolymers are too small for applications such asreceiver protection and for a variety of components necessary for optical information processing4-6. As optical nonlinearity increases with increase in conjugation or electron delocalisation,ladder polymers give maximum overlap and delocalisation, and hence are best candidates for largeX(3) (refs 162, 163). Ladder polymers are alsocharacterized by excellent thermal and chemicalstabilities and frequently exhibit exceptional mechanical strength. However, they are well-knownfor their poor solubility and hence are difficult toprocess. The present day efforts164-168focus uponthe preparation of derivatized monomers and theeffects of solvent and temperature upon the ratesof the various condensation reactions. Schluter et
al.169 have described a Diels-Alder route for synthesizing soluble ladder polymers. The generalmethodology for the production of high symmetryladder polymers by condensation of derivatizedquinones with. aromatic di- and tetra-substitutedamines as mentioned by Dalton165 is given in thefollowing Scheme:
:ur ·
not increase with increasing polymer length aftera certain chain length.
Odd parity susceptibilities such as x(l}, ,,(3) arealways present in any material. In pi electron conjugated polymers which exhibit large x(3), thepresence or otherwise of centre of symmetry doesnot pose any problems. Theoretical calculationssuggest4-6,164,170,171that the extent of electron delo-calisation influences third order optical susceptibility X(3).
Although electrical conduction property andnonlinear optical properties are based on extended pi conjugation (or even a conjugation insilanes), conductivity is found only in doped polymers and is influenced by interchain and intrachain charge transfer while large X(3) is found onlyin neutral polymers. Based on these observationsit has been realised that conducting polymers mayfind application as fast nonlinear optical materials.The NLO property in conjugated polymers is primarily a microscopic one. As oxidation/reductionis expected to affect optical properties, it isworthwhile to direct future research on the NLOof doped polymers.
Another class of compounds that exhibits NLObehaviour is the transition metal organic compound with extended pi electron delocalisation172,173as shown in (VIll).
M = Pd, PI
X = H,CH3,NH2,OC~,c2H5
The results of Dalton's work suggest that the substituent does not strongly influence the electrondelocalisatlon and this is not expected to influence x(3) (ref. 165). It also indicates that x(3) will
R • alkyl, ••tkoxy, phonoocy
Their behaviour is analogous to nonlinear phenomena observed in purely organic compounds having similar electronic characteristics. Third harmoni~ generation and power limiting measurements corroborate the presence of large third order susceptibility in these metallopolyynes. Theextent of orbital overlap is determined by theproximity and relative energies of the combiningorbitals of the correct symmetryl74. In addition tothese parameters, conformational issues also exist.For the pi electrons of· aromatic ring to overlapeffectively with 'the pi electrons of acetylenemoiety, which interact in turn with two of the dz'orbitals of the metal, the plane of the benzenering must be perpendicular to the metal phosphorous bonding axis 172.The arene plane however,rotates about the bond between one of the acetylene carbons and the connecting carbon of thebenzene rings so that at any given moment only afraction of the benzene rings' in the polymer chain
X. O,S,NH
~R
z = a,s
518 INDlANIJ CHEM, SEe. A, JUNE 1994
y oriented to provide good orbit I overnegates the expected hyperpolar' ability
enhance ent due to extended delocalisat on. To
prevent rotation, polyynes with substitue t aromatic 'gs are required. Free standin purepolymer . ms of good optical quality are e pectedto be of nsiderable use in NLO applicatio .
Phthal cyanines and their polymers po sessing- CN a d - COOH terminals have suita Ie extended s ructures that facilitate solitonic, olaronic and bipolaronic conformational d formations110,1l,126 and hence are expected t showlarge ult afast nonlinear optical propert~ . Theperipher functional groups can be us d forstfUlCtur modifications to improve procesabilityand allo fabrication of various device st cturessuch as film, channel waveguides and planarwavegui s, etc. The presence of macr cyclicstructure in these polymers provide mec anical,thermal, nd environmental stabilities. Mo eover,the optic I damage threshold of these poly ers isalso exp ted to be much higher than that f simple, low olecular weight materials. The t rminalanhydriid s of phthalocyanine polymers ar condensed ith aromatic and aliphatic dia . es togive pol 'c acids which are imidized th rmallyto form ectroactive films134.Condensation of the
anhydrid units with tetrarnines gives semi ladderor ladde type polymers possessing pyrro e typestructure 126.The combination of a and . electron syst ms' in polymeric phthalocyanine structures ca stabilize the excited electronic state,which al ws these polymers to undergo redoxprocesse in a wide potential range65,8 ,175,176.These Ipr perties make them useful as se 'conductors, lectrochemical catalysts and m terialsfor nonli ear optics. The excitation of p lymeI'chains is trongly coupled to local bond ord I' andtherefore a strong nonlinear response is hown.These p ymers can be easily incorporate .e1ectrochemi ally into other conducting polym I' matrices64,65 so that polymeric thin films pos essingboth pro essibility and electrochemical pro ertiescan be re .zed.
In vie of the similarities in the reqUir~ments
for stmc ral and NLO applications, one m st attempt sy thesis of the heterocyclic ladder polymers wit extensive aromatic rings to incre e theconjugati n, and with suitable backbone su stituents" to i rease the processibility. To obtai
imurn t,e sile properties and stability in ~light
weight terial for structural application, the
clear choi es are organic, conjugated, arom tic 0I:hetero ar matic and rigid structures to gi e ordered or sotropic materials 177.The poly-c den-
sation of substituted diquinones andl diamines in asolvent yields a soluble precursor which on heating is converted to fully cyclized materiap65. It ispossible to enhance X(3) by more than an order ofmagnitude by chemical and electrochemical doping and values up to 10 -7 esu has been achievedin ladder polymers. Polymers posse:ssing phthalocyanine structures are shown to have large X(3)
values I58,170,178,179.Cyclic voltammetry shows electro-chromic and redox properties of thesystem64,65,175,176,Magnetic and optical measurements show that the charges are associated withgeneration of polaron and bipolaron states 110,112.
Semiconductor devices from phthalocyaninesand other conducting polymers
Organic conducting polymers have very different conductivity in the reduced and oxidised stateand their conductivities are controlled by the dopant concentration, applied potential, etc,1.2.4.Thismakes them useful for a wide ranging applicationssuch as electrochemical insertion electrodes, highconductivity low density metals, materials forNLO applications and semiconductors. The extended pi conjugated structure provides the selflocalised states, which determine the operation ofa wide variety of semiconductor devices, metal-insulator semiconductor (MIS) devices, metal-insulator-semiconductor field effect transistors (MISFET), etc. In these devices the charge can be introduced into the region of surface charge at thesemiconductor/insulator interface by the application of a strong electric field across the insulator,for example two .terminal devices such as Schottky diode and MIS structure. FETs based on polyacetylene, polypyrrole, polythiophenesand metallophthalocyaninesl80-186 have been fabricated .andanalysed. These FETs operate through formationof accumulation layers generated Ithrough bandbending at the insulator semiconductor interfacewhich is controlled by the applied voltage. Thesedevices require fabrication as a selies of layers.For example, to construct a MIS structure a silicon wafer is needed as a substrate with a dopedlayer to act as gate and the native oxide layer ontop as insulator. This structure has to be coatedwith the polymer and finally capped with an evap()rated thin gold top contact. For MISFET structures, it is convenient to put the source and draincontacts into the insulator layer and the polymerlayer on top as the last stage of fabrication.Source and drain contacts may be poly-n-siliconor Au structures . .The mode of operation of organic conjugated polymer based FET showsl87that in addition to carrier mobility, the ohmic
, I "1"1" II""I!' i! illllll' 'IMlHII!IIII.~ IIII1III,j 1~~llil~I
VENKATACHALAM et al.: ELECTRONIC & PHOTONIC APPLICATIONS OF POLYMERIC PHTHALOCYANINES 519
"
contribution to the drain current must also be
taken into account. The mobility/conductivity ratio appears as the determining factor and hence,short conjugated oligomers such as polysesquithienylene188 which possess a high carrier mobilityand low conductivity would make them potentially interesting. In these systems, charge trapping bystructural defects may playa prominent role in limiting the charge transport propertiesl89. Petit etal. have made insulated gate FETs with metallophthalocyanine based active semiconductorswhose performance is comparable to that of amorphous'silicon based devicesl86. Schottky barrierdiodes have been made and formation of spacecharge regions in M /PcM/M 2 cells have beenproved by Andre et aL 190
Conclusion
The non-resonant X(3) values observed in conju·gated polymers are less than 10-9 esu (ref. 170).For practical purposes, the values has to be increased so that devices using small switching energies can be fabricated. In order to enhance theX(3) values, suitable structural modifications andspectral responses of NLO coefficients areneeded. In order to make use of organic materialsin NLO devices such as wave guides (used to confine intense light over sizable distances), processability and optical clarity are as important as largenonline(ir optical response. For example, thoughpolyacetylene has large X(3) it is practically uselessbecause of high scattering losses. Optical qualityof the materials is important for integrated opticalapplications which will involve wave guide configurations. The best optical media is provided bysilica although they have low x(3). A compositestructure of glass and polyphenylene vinylene(PPV) with optical clarity has been obtained bychemical processing of oxide glass using a sol-gelprocess. Up to 50% of PPV has been incorporated into the composite191• Similar approaches arepossible with phthalocyanine polymers possessingfunctional terminals.
Crystalline materials offer a natural way to reducing scattering losses but their birefringencemay hinder bending of wave guide structures. Itseems that glassy materials .would make a workable compromise. But chemical reactivity of theorganic materials could pose problems. In allthese aspects metallophthalocyanine polymersseem to offer good thermal, chemical and photochemical stabilities for use in a wide range of temperature and environments. Hence, in order torealize useful and viable materials for electronic
and photonic applications, the theoretical under-
standing of third order optical nonlinearity andstability of poled X(2) .molecules dispersed in polymer matrices and a thorough study uf these effects in metallophthalyanine based systems haveto be undertaken. In the organic conductingpolymer based MISFET structures, the accumulation or inversion layer is confined to the interfacebetween the polymer and the insulator and is verysensitive to the surface structure of the polymer.Hence, control of the electronic structure of theconjugated polymer on which the accumulationlayer or inversion layer is formed is very important for the improved performance of the devices.
Acknowledgement.The authors are thankful to Dr S. C. Gupta, Di·
rector, VSSC, for his keen interest in the work.They are also thankful to Dr K N. Ninan and DrR. Ramasamy for their encouragement. They arethankful to their colleagues at PEPF, PPC, at various stages.
References1 Baughman R H, in Contemporary topics in polymer sci
ence, edited by E J Vandenberg (Plenum, New York),1984, Vol. 5, 321.
2 Handbook of conducting polymers, edited by T A Skotheim (Marcel Dekker, New York), 1986, Vols 1&2.
3 Frommer J E, Plastics 85, Proceedings of the SPE 43rdAnnual Technical Conference and Exhibition, Washington DC, April 29-May' 2 (1985)417.
4 Conjugated polymeric materials-Opportunities in optoelectronics and molecular electronics, NATO AdvancedStudy Series, edited by J L Bredas & R R Chance (Kluwer, Dordrecht), 1990.
5 Ulrich D R in Organic materials for nonlinear optics,edited by R A Hann & D Bloor (Royal Soc Chern, London) 1989, 141 and references therein.
6 Nonlinear optical and electro active polymers, edited byP N Prasad & D R Ulrich (Plenum, New York) 1988.
7 Molecular semiconductors-Photoelectrical propertiesand solar cells, edited by J Simon & J J Andre (SpringerVerlag, Heidelberg), 1985.
8 Petheric R H, Interdiscip sci Rev, 12 (1987) 278.9 Potember R S, Hoffman R C, Hu H S, Cochiaro J E,
Viands C A& PoehierT 0, Polymer}, 19 (1987) 147.10 (a) Inganas 0 & Lundstrom I, Synth met, 21 (1987) 13.
(b) Pei Q & Inganas O,Adv Mater, 4 (1992) 277.11 Chien J C W, Polyacetylene chemistry, physics and mate
rials science, (Academic Press, New York) 1984.12 Frommer J E & Chance R R in Encyclopedia of polymer
science and engineering (Wiley, New York), 1986, Vol. 5,462.
13 Heeger A J, Kivelson S, Schriffer J R & Su W P, Revmod Phy, 60 (1988) 782 and references therein.
14 (a) Bredas J L & Street G B, Acc chem Res, 18 (1985)309.
(b) Green R L & Street G B, Science, 226 (1984) 651.15 Ito T, Shirakawa H & Ikeda S, J polym Sci, Polym Chem
Ed, 12 (1974) 11.16 Wegner G, Angew Chem Int Ed, Eng, 20 (1981) 361.
.,...,.,
520 INDIAN JICHEM, SEe. A, JUNE 1994
47 Iqbal D, Ivory M, Marti J, Bredas J L &. BaughmanRH, Mol Cryst Liq Cryst, 30 (1985) 2921.
48 Grassie N &.McNeill I C,;/ polym Sci, 27 (1958) 207.49 Weigl 1 W, Angew Chem Int Ed Eng, 16 (1977) 374.50 Keller T M &. Griffith J R, Am Chem Soc Symp Ser,
132 (1980) 25.51 Deits W, Cucker P, Rubner M &. Jopson H, Synth Met, 4
(1982) 199.52 Pekker S, Bellec M, Le cJeach X & Blerniere F, Synth
Met, 9 (1984) 475.
53 Osterholm J E, Yasuda H K &. Levenson L L, J applpolym Sci, 27 (1982) 981.
54 Seeger K, Gill W D, Clark T C & Street G 13, SolidState Commun, 28 (1978) 873.
55 Inoe T, Osterholm 1 E, Yasuda H K &. Levelson L L,Appl Phys LeU, 36 (1980) 101.
56 Young Z X, Dickinson L C & Chien J C W, Polym Preprints, Am chem Soc, Div Polym Chen!, 24 (2) (1983)155.
57 Chien J C W, Dickinson L C &. Lang L X, Macromolecules, 16 (1983) 1287.
58 Pochan J M, Gibson H W &. Horbour 1, Polymer, 23(1982) 435.
59 Elsenbaumer R L, Miller G G, Khanna Y, McCarthy E& Baugman R H, Electrochem Soc Extended Abstr,(1985) 118.
60 Eisenbaumer R L, Delannoy P, Miller G G, Forbes L E,Murthy N, Eckhardt H &. Baughman R H, Synth Met, 11(1985)251.
61 Druy M A, Rubner M F &. Walsh S, Synth Met, 13(1986) 207.
62 Samuelson LA&. Druy M A, Macromolecules, 19(1986) 824.
63 Elsenbaumer R H, Maleysson C &. len K Y, Polym Mater Sci Eng, 56 (1987) 54.
64 Skotheim T, RQsenthal M V &. Linkous C A, J chemSoc, Chem Commun, ( 1985) 6 I2.
65 (a) Veena V, Venkatachalam S &. Krishnamurthy V N,Polymer, 33 (1993) 1095.
(b) Veena V, Venkatachalam S &. Krishnamurthy V N(to be published).
66 Baker Grigory L in Electronic and photonic applicatiallSof polymers. Advanced Chemistry Series 218, edited byMurray 1 Bowden &. Richard S Turner (Am Chern Soc.Washington DC), 1988.
67 Bates N, Cross M, Lines R &. Walten D, J chem Sac,Chem Commun, (1985) 871.
68 Peres R C D, Pernaut J M &. DE Paoli M A. J polym SciPart A, Polymer Chem, 29 (1991) 225.
69 Bjorklund R &. Liedberg B, J chem Soc, Chem Commun,(1986) 1293.
70 Bruce Nowe &. Thomas Wallow. J Am chem Soc, 113(1991) 7411.
71 Audebert P A, Bidan G, Lapkowski M & Limosin D inElectronic properties of conjugated polymers, edited byM M Kuzmany, M Mehring &. S Roth (Springer, Berlin),1987, Vol. 76, pp ..366.
72 Delabouglise D, Roncali 1, Lemaire M &. Garnier F, Jchem Soc, Chern Commun, (1989) 475.
73 Lemaire M, Delabouglise D, Garreau R, Guy A &. Roncali J, J chern Soc, Chem Cvmmun, (1988) 658.
74 Eisenbaumer R L, len K Y &. Oboodi R, Synth Met, 15(1986) 169.
75 Leclerc M & Daorest G, J chem Soc, Chem Commun,(1990) 273.
1579,
el, 15
M, J polym Sci Part A, Polym Chem, 25 P987)
Maleyson C & Baughman R H, SylUh61.
D, Polymer. 6 (1965) 319.&. Dudek L P, J polym Sci, 23 (1985)
17 , Wegner G, Muller W & Enldeman V, IMakro
mol ~m Rapid Commun, 1 (1980) 621.18 Shinlk waH&IkedaS,SynthMet, 1 (1979/1980) p5.19 Mac 'arrnid A G & Heeger A J, Synth Met, 11(1980)101.
20 (a) Di A F, Kanazawa K K & Gardini G P, II chemSo Chem Commun,635 (1979).
(b). K azawa K K, Diaz A F, Gill W D, Gra* P M,Str et G 13, Gardini G P & Kwak J F, Synthl Met, 1(19 0) 329.
21 Electri al properties of polymers chemical princip{es edited by Chen C Ku and R Liepins (Hauser, Munich),1987, 78 and references therein.
22 MacN ill I C, Straiton T & Anderson P, J poPolym hem Ed, 18(1985)2085.
23 Bott C, Brown C S, Chai C K, Walker N ~, FeastW S, ot P J S, Calvert C S, Billingham N S &1 FriendRH,S nth Met, 14(1986)245.
24 Gagno D R, Capistron J 0, Karasz F E & Le* R W,Polym reprints Am Chem Soc Div Polym Chemj 25 (2)(1984) 84.
25 ':a) Sh Idette L W, Chance R R, Ivory D M, Miller GG BaughmanRH, Synth Met, 1 (1980) 307.
(b) Ch ce R R, Shacldette L W, Miller G q IvoryD , Sowa J M, Eisenbaumer R L & Ba~ghman,R , J chem Soc, Chem Commun, (1980) 347.
27 Strel::t B, Clark T C, Krounbi M, Kanazawa K,ILee V,Pflung r P, Scott J C & Weisser G, Mol Cryst Li~ Cryst,83(19 2)253.
28 Dirk W, Inabe T, Schoch K F & Marks T JJ J Amchem c, 105 (1983) 1539, 1551.
29 Orthm E A & Wegner G, Makromol Cheml RapidComm n, 4(1983)687.
30 O'Brie R N & Santhanam K S V, J electroche',n Soc,129 (1 82) 1266.
31 Mac D rmid A J, Chiang J C, Richter A F & Eo!;tein AJ, Sym Met, 18 (1987) 285.
32 JEIsenb umer R L & Schaklette L W, in Hand~ook of('omiu ing polymers, edited. by T A Skotheim (MarcelDekke New York) 1986, Vol 1, pp 257.
33 Bargon J, Mohamed S & Waltman R J, IBM J Res'Develop, 7 (1983) 330.
34 Kim 0 ,J polym Sci, Polym Leu Ed, 20 (1982) 66 .35 Nilbou n K & Murray R W, Macromolecules, 211(1988)
89.
36 BaseSC~N' Liu Z X, Moses D, Heeger A 1, Naadnan H
& The hilou N, Nature, 327 (1987) 403.
37 Trivedi C, J chemSoc, Chem Commun, (1989) 544.38 Baugh an R H, Bredas 1 L, Chance R R, EisenllaumerR L & haklette L W, Chem Rev, 82 (1982) 209.
39 Grivell J V &. Lau J H N, Macromolecules, 10 1(1977)1307.
4.0 Duke: 113 &. G.ibson H W in Encyclopaedia of c~emical
lechno gy, edited by K Oathmer (John Wilevl NewYork), 01. 18, 1982,755.
41 Walton T R, Griffith J R & Reardon J P, J appll polymSci,30 1985) 2921.
42 Keller M &. Gatz R F, Polymer Commun, 28 ~1987)334.
43 Keller2569.
44 Iqbal(1986)
45 Bruck46 Lin J
1589.
I II'!IIIII'II' 'I' "
VENKATACHALAM et al.: ELECTRONIC & PHOTONIC APPUCATIONS OF POLYMERIC PHTHAWCYANINES 521
76 Gustaffson G, Inganas 0, Nilsson J 0 & Lieelber B,Synth Met, 26 (1988) 297.
77 Blohm M, VanDort P C & Pickett J E. Chem Tech,(1992) 105.
78 Baurle P, Gaudl K U, Wurthner F, Sariciffci N S, Neugebauer H, Mehring M, Zhons C & Doblhofer K, AdvMater,2 (1990) 490.
79 Rocali J, Garreau R, Delabouglise D, Garnier F & Lemaire M, Synth Met, 28 (1989) 341.
80 Delabouglise D & Garnier F, Adv Mater, 2 (1990) 91.81 (a) WohrieD,AdvpolymSci,50(1983)75.
(b) Kaneko M & Wohrle D, Adv polym Sci, 84 (1988)14l.
82 Venkatachalam S, Vijayan T M, Packirisamy S, MakrY;mol chem Rapid Commun, 14 (1993) 703.
83 Dirk C W, Mintz E A, Schoch K F & Marks T J inAdvances in organometallic and inorganic polymer science, edited by <;harles E Carraher, James E Sheats &Charles U Pitman (Marcel Dekker, New York), 1981,275.
S4 Kuznosoff P M, Nohr R S, 'Wynne K J & Kenney M E,in Advances in organometallic and inorganic polymerscience, edited by Charles E Carraher, James E Sheats& Charles U Pittman (Marcel Dekker, New York), 1981,.301.
85 Moser F H & Thomas A L, Phtlullocyanine compounds,(Reinhold, New York), 1963 and references therein.
S6 Eley D D & Parfitt G D, Trans Faraday Soc, 51 (1955)1529.
87 ElvidgeJ A& Linstead RP,Jchem Soc, (1955) 3536.8S Peterson J L, Schram C S, Stojakovic D R, Hoffman B
M & T J Marks, JAm chem Soc, 99 (1977) 286.89 Marks TJ & Kalina D W in Extended linear clulin com
pounds, edited by J Miller (Plenum, New York) Vol. I,1982,197.
90 Martinson J, Stanton J L, Greene R L, Tanaka J, Hoffman B M & Ibers J A, J Am chem Soc, 107 (1985)6915.
91 Krogmann K, Angew Chem Intnatl Ed Eng, 8 (1965) 35.92 Torrence J B in Molecular Metals, edited by W E Hat-
field (Plenum, New York), 1979, 7.93 Garito A F & Heeger AJ, Acc chem Res, 7 (1974) 232.94 Lever A B P, Adv inorg Chem radiochem, 7 (1965) 27.95 Marvel C S & Rassweller J W, J Am chem Soc, 80
(1958) 1197.96 Epstein A & Wildi B S, J chem Phys, 32 (1964) 324.97 Wild) B S & Katon J E, J polym Sci, A2 (1964) 4709.98 Berlin A & Sherlie A I, Inorganic Macromol Rev,
(1971) 235.99 Bannehr R, Meyer G & Wohrle D, Polym Bul~ 2 (1980)
841.
100 Wohrle D, Adv polym Sci, 10 (1972) 35.10I Achar B N, Fohlen G M & Parker J A, J polym sci pfr
lym Chem Ed, 21 (1983) 589.102 Walton T R, Griffith J R & O'Rear J G in Adhesion sci
ence and technology, polymer science and technology,edited by L H Lee (Plenum, New York), 1975, Vol. 9,655.
103 Pascal T, Malinge J, Sillion B, Claudy P & Leto.ffe J M,J polym sci, Polym chem Ed, 26 (1988) 865.
104 Oarthman E A, Enkleman V & Wegner G, MakromolChem Rapid Commun, 4 (1983) 687.
105 Joyner R D & Kenney M E, Chem Eng News, 40 (1962)42.
106 Meyer G & Wohrle D. Makromol Chem, 175 (1974)715.
107 Linsky J P, Paul T R, Nohr R S & Kenney M E, InorgChem,(1980) 3131.
108 Hanack M in Quantum chemistry of polymers-Solidstate aspects, edited by J ,Ladik & J J Andre (D Reidel,Dordrecht), 1984, 112, and reference therein.
109 Shirai H, Hogaki S, Hanabusa K & Hojo N, J polym SciPolym Let( Ed, 21 (1983) 157 ..
110 Venkatachalam S, Rao K V C & Manoharan P T, SynthMet, 26 (1988) 237.
111 Venkatachalam S, Rao K V C & Manoharan P T, PO/ymer, 30 (1989) 1633.
112 VenlCatachalam S, Rao K V C & Manoharan P T, Jpolym Sci Polym Phy Ed, Part B, 32 (1994) 37.
113 Achar B N, Fohlen G N & Parker J A, J polym Mater, 1(1984)65.
114 Norrell C J, Pohl H A, Thomas M & Berlin K D, Jpolym Sci, PolymPhys Ed, 12 (1974) 913.
115 Venkatachalam S, Rao K V C & Rita Mendez, J polymMater, 3 (1986) 65.
116 Nohr R S, Kuznesoff P M, Wynne K J, Kenney M E &Siebenman P G, JAm chem Soc, 103 (1981) 4371.
117 Ciliberto E, Doris K A, Pietro W J, Reisner G M, D EEllis, Fragala I, Heriestin F H, Ratner M A & Marks TJ, JAm chem Soc, 106 (1984)7148.
118 Pietro W J, Marks T J & Ratner M A, JAm chem Soc,107 (1985)5387.
119 Marks T J, Science, 227 (1985) 881.120 Dirk C W, Inabe T, Lyding J W, Schoch F Jr, Kannewurf
C R & Marks T J, J polym Sci, Polym Symp, 70 (1983)1.
121 Candel E & Alvarez S, InorgChem, 23 (1984) 573.122 Inabe T, Lyding J W, Moguel M K & Marks T J, J Phys
(Paris, France), C3 (~983) 625.123 Inabe T, Lomex J F, Lyding J W, Kannewurf C R &
Marks T J, Synth Met, 9 (1984) 303.124 Wohrle D, Adv polym Sci, 'SO (1983) 105, 90.125· Venkatachalam S, Rao K V C & Manoharan P T, in Polymer
science-Contemporary topics, edited by S Sivaram (TataElsevier, New Delhi) 1991,727.
126 Venkatachalam S, Rao K V C & Manoharan P T inFrontiers in polymer research, edited by P N Prasad & JK Nigam (Plenum, New York), 1991,431.
127 Chance R R, Boudreaux D S, Bredas J L & Silbey R,Handbook of conducting polymers, edited by T A Skotheim, Vols I & II, (Marcel Dekker, New York), 1986,pp 825.
128 Bredas J L in Handbook of conducting polymers, editedby T A Skotheim, Vols I & II, (Marcel Dekker, NewYork), 1986, pp 859 and references therein.
129 Su W P, Schriffer J R & Heeger A J, Phy Rev Lett, 42(1979) 1978; Phy Rev B, 22 (1980) 2099.
130 Chance R R, Boudreaux D S, Eckhardt H, ElsenbaumerR I, Frommer J E, Bredas J L & Silbey R in Quantumchemistry of polymers-Solid state aspects edited by JLadik & J J Andre (Reidel, Dordrecht), 1984,221.
131 Weinberger B R, Kaufer J, Heeger A J, Pron A, MacDiarmid A G, Phys Rev,B20 (1979) 223.
132 Kispert L D, Joseph J, Miller G G & Baughman R H, Jchem Phys, 81 (1984) 2119.
133 Li H & Guarr T F, J chem Soc, Chem Commun, (1989)832.
134 Venkatachalam S & Prabhakaran P V, Eur polym J, 29(1993) 711.
135 Optical properties of polymers, Proceedings of MRS Symposium, Vol. 109 edited by A J Heeger, J Orenstein &DR Ulrich, 1988.
522 INDIAN JICHEM, SEe. A, JUNE 1994
158 Neher D, Kaltbeitzel A, Wolf A, Bubeck C & Wegner G,in Conjugatel1 polymeric materials-Opportunities in oJrtoelectronics and molecular electronics edited by J LBredas & R R Chance, NATO Advanced Study Series,E Appl Sci, Vol. 182 (Kluwer, Dordrecht) 1990, pp. 387and references therein.
159 Sasabe H, Wada T, Sugiyama T, Ohkawa H, Yamada A& Garito A F, in Conjugated polymen'c materials-OJr
portunities in optoelectronics and molecular electronicsedited by J L Bredas & R R Chance, NATO AdvancedStudy Series, E Appl Sci, Vol. 182 (Kluwer, Dordrecht)1990, pp. 399 and references therein.
160 Epstein A J, Ginder J M, Roe M G, Gustafson T L,Ange10poulos M -& Macdiarmid A G in Nonlinear optical properties of polymers. Proceedings of the MaterialsResearch Society, edited by A J Heeger, J Orenstein &D R Ulrich, (Materials Research Sodety, Pittsburgh),Vol. 109, 1988,313.
161 Allan J R, Milburn G H W, Shand A J, Tsibouklis J &Werninck A R in Organic materials for nonlinear optics
edited by R A Hann & D Bloor, (Royal Soc Chern,London), 1989, 196, and references therein.
162 Ulrich D R in Nonlinear optical and electroactive polymers, edited by P N Prasad & D R Ulrich, (Plenum, NewYork), 1988, p. 1.
163 Sapochak L S, Mc Lean M R, Mai Chen & Dalton L R,Proc Soc Photo-Opt Instrum Eng, 1991, 1665.
164 Luping Yu, Mai Chen & Dalton L R, Chern Mater, 2(1990) 649.
165 Dalton L R in Nonlinear optical ami electroactive po
lymers, edited by P R Prasad & D R Ulrich, (Plenum,New York), 1988,243.
166 Dalton L R in Nonlinear optical properties Df prJlymers,Proceedings of the Materials Research Society edited oyA J Heeger, J Orenstein & D R Ulrich (Materials Researcll Society, Pittsburg, Pennsylvania), Vol. 109, 1988,pp.301.
167 Yu L, Polis D W, Mc Lean M R & Dalton L R in "Electroresponsive molecular and polymeric systemS', editedby T J Skotheim (Marcel Dekker, New York), 1991, Vol.2,113.
168 Yu L, Polis D W, Sapochak L S & Dalton L R in Organic molecules for nonlinear optics and photonics, NATOASI Series, E Appl Sci, edited by JMessier, F Kajzar &P PFasad (Kluwer, Netherlands), Vol. 194, 1991,273.
169 (a) Blatter K, Godt A, Vogel T & Schluter A D, in Electronic properties of polymers, Springer Series in SolidState Sciences, edited by H Kuzmany, M Mehring &S Roth (Springer Verlag, Berlin) Vo1.7, 1992,408.
(b) Schluter A D, Adv Mater, 3 (1991) 282.170 P R Prasad in Nonlinear optical properties of polymers,
Proceedings of the Materials Research Society, edited byA J Heeger, J Orenstein & D R Ulrich (Materials Research Society, Pittsburgh), Vol. 109, 1988,271.
171 Garito A F, Heflin J R, Wong K Y & Zamani-Khamiri inNonlinear optical properties of polymers, Proceedings ofthe Materials Research Society, edited by A J Heeger, JOrenstein & D R Ulrich (Materials Research Society,
Pittsburgh), Vol. 109, 1988, pp. 9l.172 Frazier C C, Chauchard E A, Cockerham M P & Porter
P L in Nonlinear optical properties of polymers, Proceed
ings of the Materials Research Sod.ety, edited by A JHee~er, J Orenstein and D R Ulrich, (Materials Research Society, Pittsburgh), Vol. 109, 1988,323.
173 Frazier C C, Guha S, Chen W P, Co(:kerham M P, PorterP L, Chauchard E A, Lee C H, PolymE'r,28 (1987) 553.
136 Prasad P N & Williams D J, Introduction to nqnlinearoptica effects in molecules and polymers (Wiley, NewYork) 99l.
137 Bowd M J in Electronic and photonic applicarions ofpolym rs edited by M J Bowden & S R Turn~r (AmChern oc, Washington DC), 1988, l.
138 Willia s D J, Angew Chern 1mEd Eng~ 23 (1984) ~90.139 Singer K D, Sohn J E, King L A, Gordan H JI.1, Katz
HE Dirk C W,J opt Soc Am B, 6 (1989) 1339.
140 Teng C & GaritoAF, Phys Rev Lett, 50(1983) ~50.141 Singer K D, Sohn J E & Lalama S J, Appl Phys ILett, 49
(1986 248.142 Katz E, Singer K D, Sohn J E, Dirk C W,
Gord n H M,J Am chern Soc, 109 (1987) 656l.
143 Singe K D & Sohn J E in Electroresponsive ~OleCUlar
and lymeric systems, edited by T A Skotheim (MarcelDekk r, New York), Vol. 2, 69, and references the ein.
144 Dub s J C in Nonlinear optical ana electroacti polymers, e ited by P N Prasad & D R U1ricl1 (P1en m, NewYork pp.32l.
145 Willi ms D J in Electronic and photonic applid,ations ofpoly ers edited by M J Bowden & S R Turper (AmChe Soc, Washington DC), 1988,297.
146 Barr d A & Vandevyver M in Nonlinear OP!'Cal propetti s of organic molecules and crystals edite by D SChe la & J Zyss, (Academic Press, New Yor ), 1987,357.
147' Mo an GRin Organic materials for nonlinf!pr optics,edite by R A Hann & D Bloor, (Royal sdc Chern,Lon on), 1989,275.
148 Ml~r ith G R, Vandusen J G & Williams D J, IMacrom-olec les, 15 (1982) 1385.
149 Stari g E G J, Rikken G L G A, Seppen C J $, NijhuisS & enhuizen A H J, Adv Mater, 3 (1991) 40l.
150 Will' ms D J in Nonlinear optical propertiesmol cules and crystals edited by D S Chemla(Ac emic Press, New York), 1987, pp. 406.
15 L Mer dith G R, Vandusen J G, Williams D J in
opti al properties of organic and polymeric materials,AC Symposium Series 233 edited by Willi s D J,(/1 Chemical Society, Washington DC), 1983, p. 109.
152 De artino R N, Choe E W, Khanarian G, Haas D,L,es e T, Nelson G, Stamatoff J, Stuetz D, Te g C C &Yoo H in Nonlinear optical and electroactive polymers,
edit d by P N Prasad & D R Ulrich, (Pie urn, NewYor ) 1988, 169.
153 Pat G N, Chance R R & Witt J D, J che(19 9) 4387.
154 F,l anis C in Nonlinear optical properties 0iPOlymeriC
ma rials, ACS Symposium Series 233, edite by D JWi1 iams (Am Chern Soc, Washington DC) 1983, 167.
155 Sha d M L & Chance R R in Nonlinear optic I propert
ies 1organic polymeric materials, ACS Symp sium Series 33, edited by D J Williams (Am Chern OC, Wash
n DC), 1983,11\7.
156 Cader G M, Chen Y J & Tripathy SKin NO~linear optproperties of organic and polymeric mat rials, ACS
SY~POSium Series 233, edited by D J Will ;lIDS, (Am
Ch m Soc, Washington DC), 1983,213.157 B~ r D, Ando D J, Norman P A, Drake A
01 royd A R, Werrett B S, Kar A K, Ji W
in Conjugated polymeric materials-OPPO$.i,itieS inlectronics and molecular electronics, N TO Adv-
d Study Series (Kluwer, Dordrecht) 199 , pp, 377,references therein.
I I'" , ,II "!!"'I"I' "'"I''' H"1i 'I
VENKATACHALAM et al.: ELECTRONIC & PHOTONIC APPLICATIONS OF POLYMERIC PHTHALOCYANINES 523
I
174 Porter P L, Guha S, Karg K, Frazier C C, Polymer, 32(1991) 1756.
175 Schumann B, Wohrle D & Jaeger N I, J electrochem Soc,132 (1985) 2144.
176 Schumann B, WohTle D, Schmidt V & Jaeger N I, Makromol Chem Macromol Symp, 8 (1987) 195, and references therein.
177 Wolfe J F & Bitler SPin Nonlinear optical and electroactive polymers edited by P N Prasad & D R Ulrich(Plenum, New York), 1988,401.
178 Orti E & Bredas J L in Conjugated polymeric materials-Opportunities in optoelectronics and molecular electronics, NATO ASI Series, edited by J L Bredas & R RChance (Kluwer, Dordrecht) 1990, pp. 401.
179 Kaltbeitzel A, Neher D, Bubek C, Sauer T, Wegner G &Caseri W, in Electronic properties of conjugated polymersIII, Springer Series in Solid State Sciences, Vol. 91, edited by H Kuzmany , M Mehring & S Roth (Springer-Verlag, Berlin) 1989,pp. 220.
18D Friend R H & Burroughs J H, Faraday Discuss chemSoc, 88 (1989) 213.
181 Burroughs J H, Jones C A & Friend R H, Nature, 335,(1988) 3255.
182 Koezuk H & Tsumura A, Svnth Met, 28 (1989) C 753.
183 Tsumura A, Kozuka H & Ando T, Synth Met, 25 (1988)11.
184 Assadi A, Svensson C, Wilander M & Inganas 0, ApplPhys Left, ~3 (1988) 195.
185 Mardru R, Guilland G, Alsadoun M, Maitrit M, Andre JJ, SimonJ & Even R, Chem Phys Left, 145 (1988) 343.
186 Petit P, Threk Ph, Andre J J, Even R, Simon J, MadruR, Alsadoun M, Guilland G & Maitrot M, Synth Met, 29(I989)F 59.
187 Garnier F, Horowitz G & Fischou D in Electronic properties of polymers, Springer Series, Solid State Sciences,edited by H Kuzmany, M Mehring & S Roth, Vol. 107,1992, pp. 458.
188 Horowitz G, Adv Mater, 2 (1990) 287 and referencestherein.
189 Burroughs J H, Jones C A, Lawrence R A & Frjend RH, in Conjugated polymeric materials-Opportunities inoptoelectronics and molecular electronics, NATO Advanced Study Series, edited by J L Bredas & R R' Chance(Kluwer, Dordrecht), 1990, pp. 421.
190 Andre J J, Simon J, Even R, Boujema B, Guillaud G &Maitrot M, Synth Met, 19 (1987) 683.
191 Wang C J, Pang Y, Prasad P N & Karasz F E, Polymer,32(1991)605.