pny ssd datasheet cs2111 library/support/pny products/resource...05/29/2015 document number:...

05/29/2015 Document Number: PNY_SSD_DATASHEET_CS2111 Product SpecificationPNY Proprietary Product Specification Subject to Terms of Use 1Copyright © 2015 PNY TECHNOLOGIES. All rights reserved.

PNY Technologies Solid-State Drive CS2111

CS2111

Product Specification

•Capacities: - 240 GB, 480 GB, 960 GB

•Components: - Controller: SM2246EN - MLC NAND Flash Memory

•Form Factor: - 2.5-inch

•Thickness: - 7 mm with 2.5 mm spacer

•Weight: - 80 grams (max)

•Sequential Read/Write1: - Sequential Read: up to 560 MB/s - Sequential Write: up to 455 MB/s

•Random Read/Write2: - Random Read: up to 79,000 IOPS - Random Write: up to 75,000 IOPS

•Compliance: - SATA Revision 3.2; compatible with SATA

6Gb/s, 3Gb/s and 1.5Gb/s interface rates - ATA-ATAPI command Set – 2 (ACS-2);

includes SCT (Smart Command Transport) and device statistics log support

•Features: - Native Command Queuing (NCQ) - Data set management (TRIM) - Enhanced SMART ATA feature set

•Power Management: - 2.5-inch: 5V SATA Supply Rail - HIPM/DIPM - SATA Link Power Management (LPM)

•Power3: - Active: 0.81W (Avg) - Idle: 0.53W (Avg)

•Temperature: - Operating: 0 °C to 70 °C - Non-Operating: -40 °C to 85 °C - Temperature monitoring and logging

•Reliability: - UBER: ≤ 1 sector per 1015 bits read - MTBF: 1,200,000 hours - Shock: 1,500 G/0.5 ms, operating - ECC: Up to 66 bits correctable per 1024-

byte sector Read•Product Ecological Compliance:

- RoHS, REACH•Certifications and Declarations:

- CE, FCC, RCM/C-Tick, BSMI, SATA-IO•Compatibility:

- Windows 7 and Windows 8.1 - openSUSE 13.1 - Ubuntu 14.04 - CentOS 7.0 - Apple OS X Yosemite - PNY Drive Utility

•Warranty - 4 year Limited Warranty4

1. 128KB transfer size: QD322. 4KB transfer size: QD32

3. Based on 480 GB4. Standard warranty is 2-years. Four-year war-

ranty granted upon registration at www.PNY.com. Product must be

registered within 90 days of purchase.

http://www.PNY.com



CS2111

Terms of UseTHESE TERMS GOVERN YOUR USE OF THIS DOCUMENT AND THE INFORMATION DISCLOSED THEREIN. DO NOT USE THIS DOCUMENT OR THE INFORMATION DISCLOSED THEREIN IF YOU DO NOT AGREE WITH THESE TERMS.

THIS DOCUMENT AND THE INFORMATION DISCLOSED THEREIN IS PROVIDED AS-IS SOLELY FOR USE WITH AND IN CONNECTION WITH PNY TECHNOLOGIES, INC. (“PNY”) PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN PNY'S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, PNY ASSUMES NO LIABILITY WHATSOEVER, AND PNY DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY, RELATING TO THE SALE AND/OR USE OF PNY PRODUCTS INCLUDING LIABILITY AND WARRANTIES REL3ATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.

PNY PRODUCTS ARE NOT INTENDED TO BE USED IN MISSION CRITICAL APPLICATIONS. A "MISSION CRITICAL APPLICATION" IS ANY APPLICATION IN WHICH FAILURE OF THE PNY PRODUCT COULD RESULT, DIRECTLY OR INDIRECTLY, IN PERSONAL INJURY OR DEATH. SHOULD YOU PURCHASE OR USE PNY'S PRODUCTS FOR ANY MISSION CRITICAL APPLICATION, YOU HEREBY AGREE TO AND SHALL INDEMNIFY AND HOLD PNY AND ITS SUBSIDIARIES, SUBCONTRACTORS AND AFFILIATES, PREDECESSORS, SUCCESSORS AND SUCCESSORS-IN-INTEREST, AND THEIR RESPECTIVE HEIRS, EXECUTORS, ADMINISTRATORS, ASSIGNS, OFFICERS, MANAGERS, DIRECTORS, EMPLOYEES, SHAREHOLDERS, AND AGENTS OF EACH (“INDEMNIFIED PARTIES”), HARMLESS AGAINST ALL CLAIMS, COSTS, DAMAGES, AND EXPENSES AND REASONABLE ATTORNEYS' FEES ARISING OUT OF, DIRECTLY OR INDIRECTLY, ANY CLAIM OF PRODUCT LIABILITY, PERSONAL INJURY, OR DEATH ARISING IN ANY WAY OUT OF SUCH MISSION CRITICAL APPLICATION, WHETHER OR NOT THE INDEMNIFIED PARTIES WERE NEGLIGENT IN THE DESIGN, MANUFACTURE, OR WARNING OF THE PNY PRODUCT OR ANY OF ITS PARTS.

PNY may, in its sole discretion and without notice, make changes to specifications and product descriptions at any time. By using this document you agree not to rely on the absence or characteristics of any features or instructions marked "reserved" or "undefined." PNY reserves these for future definition and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes. The information here is subject to change without notice. Do not finalize a design with this information.

The PNY Products described in this document may contain design defects or errors known as errata which may cause the product to deviate from published specifications. Current characterized errata are available on request.

Contact your local PNY sales office or your distributor to obtain the latest specifications and before placing your product order.

Copies of documents which have an order number and are referenced in this document, or other PNY literature, may be obtained by calling 1-800-234-4597, or go to: http://www.pny.com/

Low Halogen applies only to brominated and chlorinated flame retardants (BFRs/CFRs) and PVC in the final product. PNY components as well as purchased components on the finished assembly meet JS-709 requirements, and the PCB/substrate meet IEC 61249-2-21 requirements. The replacement of halogenated flame retardants and/or PVC may not be better for the environment.

PNY® and the PNY logo are trademarks of PNY in the U.S. and other countries.

*Other names and brands used in this document may be the property of others.

Copyright © 2015 PNY. All rights reserved.

Ordering Information

Part Number1

1. “xxx” = RB or BLK ; RB = “Retail Box”, BLK = “Bulk”

Size Form Factor

SSD7CS2111-240-xxx 240 GB 2.5-inch (7mm with 2.5 mm spacer)



http://www.pny.com/



CS2111

1.0 Overview................................................................................ 72.0 Product Specifications .............................................................. 8

2.1 Capacity............................................................................. 82.2 Performance ....................................................................... 82.3 Electrical Characteristics....................................................... 92.4 Environmental Conditions ..................................................... 92.5 Reliability ........................................................................... 92.6 Hot Plug Support ................................................................. 9

3.0 Physical Information ................................................................ 104.0 Physical Pin and Signal Information............................................ 11

4.1 Pin Locations, 2.5-inch factor ................................................ 114.2 Signal Pins, Connector Definitions.......................................... 114.3 Power Pins Connector Definitions........................................... 12

5.0 Supported Command Sets ........................................................ 135.1 General Commands ............................................................. 13

5.1.1 General Feature Command Set....................................... 135.1.2 Power Management Command Set.................................. 145.1.3 Security Mode Feature Command Set .............................. 145.1.4 SMART Feature Command Set........................................ 155.1.5 Host Protected Area Feature Command Set ...................... 155.1.6 48-bit Address Feature Command Set ............................. 165.1.7 NCQ Feature Command Set ........................................... 165.1.8 Data Set Management (TRIM) ........................................ 16

5.2 Identify Device Data ............................................................ 175.3 SMART Feature Support ....................................................... 22

5.3.1 SMART Feature Command Set........................................ 225.3.2 SMART Data Structure................................................... 23

6.0 Certifications, Declarations and Compliance ................................ 247.0 References ............................................................................. 268.0 Terms and Acronyms ............................................................... 27

Content



CS2111

Revision History............................................................................ 6User Addressable Sectors............................................................... 8Sequential Read/Write ................................................................... 8Random Read/Write ...................................................................... 8Operating Voltage and Power Consumption....................................... 9Shock and Temperature................................................................. 9Reliability..................................................................................... 9Signal Pins, 2.5-inch Form Factor .................................................... 11SATA Power Pin definitions ............................................................. 12General Feature Command Set ....................................................... 13Power Management Command Set .................................................. 14Security Mode Feature Command Set .............................................. 14SMART Feature Command Set ........................................................ 15Host Protected Area Feature Command Set ...................................... 1548-bit Address Feature Command Set.............................................. 16NCQ Feature Command Set............................................................ 16Data Set Management (TRIM)......................................................... 16ID Table Information ..................................................................... 17SMART Feature Register Values....................................................... 22SMART Data Structure ................................................................... 23Certifications, Compliance and Declarations ...................................... 24References................................................................................... 26Terms and Acronyms..................................................................... 27

Tables



CS2111

Figure 1.0: 2.5-inch dimensions...................................................... 10Figure 2.0: Signal and Power pins, 2.5-inch, form factor .................... 11

Figures


CS2111

Table 1: Revision History

Document Number RevisionNumber Description Revision

Date

PNY_SSD_DATASHEET_CS2111 001 Advance Release 03/02/2015

PNY_SSD_DATASHEET_CS2111 002 Preliminary Release- Revised certification/compliance

table

- Revised the front page

- Updated the overview page

- Updated the 960 GB data

- ID table updated

05/08/2015

PNY_SSD_DATASHEET_CS2111 003 Production Release- All drives are SATA-IO compliant

05/29/2015




CS2111

1.0 OverviewThe PNY CS2111 2.5-inch SATA (6 Gb/s) solid state drive (SSD) is the next generation ofXLR8™ SSD SSD that offers our highest performance when transferring multimedia files.Whether editing multiple videos at once or seeking out an edge over the competition in thehigh performance gaming segment, the CS2111 is the right choice. Coupled with PNY XLR8graphics cards, these SSDs give a tremendous out of the box experience for graphicsintensive gaming at blazing fast speeds without compromising storage reliability.

Optimized for high sequential read speeds of up to 560 MB/s, this drive is specifically gearedto dramatically improve game load and entry times, putting you always one step ahead ofyour competition and making every frame count.

Experience ultra-responsive gaming, multitasking and multimedia storage. The PNY CS2111offers capacities of 240 GB, 480 GB and 960 GB using the latest MLC NAND Flash. TheCS2111 SSD is the best choice for the PC enthusiast and gamers when upgrading from theirslow HDD, offering simple installation and relative low cost.

EXTREME PERFORMANCE

• High speed sequential read data transfers of up to 560 MB/s support an exhilarating gam-ing experience

• Random read IOPS up to 79,000 • Secure Erase features to keep your data protected • TRIM support and background garbage collection improves latency and performance

RELIABILITY

• MTBF: 1,200,000 hours • Features MLC NAND for high quality and endurance • Support for S.M.A.R.T. drive health monitoring

APPLICATIONS

• Reliable and safe multimedia storage • Ideal for Gamers and PC Enthusiasts • Boot Drives • Supports multiple OS


CS2111

2.0 Product Specifications

2.1 Capacity

2.2 Performance

Table 2: User Addressable Sectors

CS2111 Unformatted Capacity(Total User Addressable Sectors)

240 GB 468,862,128

480 GB 937,703,088

960 GB 1,875,385,008

Table 3: Sequential Read/Write

Specifications1

1. Sequential Read/Write Performance measured using IOMeter with 128 KB transfer size at Queue Depth 32

Unit 240 GB 480 GB 960 GB

Sequential Read MB/s 555 560 560

Sequential Write MB/s 320 455 455

Table 4: Random Read/Write

Specifications1

1. Random Read/Write Performance measured using IOMeter with 4 KB transfer size at Queue Depth 32

Unit 240 GB 480 GB 960 GB

Random 4KB Read IOPS 79,000 79,000 79,000

Random 4KB Write IOPS 72,000 75,000 75,000



CS2111

2.3 Electrical Characteristics

2.4 Environmental Conditions

2.5 Reliability

2.6 Hot Plug SupportSupports SATA 3.1 specifications.

Table 5: Operating Voltage and Power Consumption

Specification Unit 240 GB 480 GB 960 GB

Operating Voltage for 5V (+/-5%)MaxMin

VoltsVolts

5.254.75

5.254.75

5.254.75

Idle Average Power Watts 0.5 0.5 0.5

Active Average Power1

1. Power measured during 4 KB random read with Queue Depth 1.

Watts 0.8 0.8 0.8

Table 6: Shock and Temperature1

1. Based on temperature sensor.

Environmental Condition Range

Shock, Operating 1,500 G at 0.5 ms

Case TemperatureOperatingNon-operating

0° C to 70° C- 40° C to 85° C

Table 7: Reliability

Parameter Value

Uncorrectable Bit Error Rate (UBER) ≤ 1 sector per 1015 bits read

Mean Time Between Failures (MTBF) 1,200,000 hours

Minimum Useful Life

SSD will have a minimum useful life assuming a typical client workload of up to 30 GB of host writes per day.

4 years



CS2111

3.0 Physical Information

Figure 1.0: 2.5-inch dimensions



CS2111

4.0 Physical Pin and Signal Information

4.1 Pin Locations, 2.5-inch factorFigure 2.0: Signal and Power pins, 2.5-inch, form factor

4.2 Signal Pins, Connector Definitions

Table 8: Signal Pins, 2.5-inch Form Factor

Pins Function Definition

S1-1 Ground 1st mate

S1-2 A +Differential signal pair A, 2nd mate

S1-3 A -


S1-5 B -Differential signal pair B, 2nd mate

S1-6 B +




CS2111

4.3 Power Pins Connector Definitions

Table 9: SATA Power Pin definitions

Pins Function Definition Mating Order

P1-1 V33 3.3 V power, not used 2nd mate



P1-4 Ground 1st mate



P1-7 V5 5 V power 2nd mate




P1-11 DAS device activity signal 1st mate


P1-13 V12 12 V power, not used 2nd mate





CS2111

5.0 Supported Command Sets

5.1 General Commands5.1.1 General Feature Command Set

Table 10: General Feature Command Set

Command Code Protocol

Execute Device Diagnostic 90h Execute device diagnostic

Flush Cache E7h Non-data

Identify Device ECh PIO data-in

Initialize Drive Parameters 91h Non-data

Read DMA C8h DMA

Read Log Ext 2Fh PIO data-in

Read Multiple C4h PIO data-in

Read Sector(s) 20h PIO data-in

Read Verify Sector(s) 40h or 41h Non-data

Set Feature EFh Non-data

Set Multiple Mode C6h Non-data

Write DMA CAh DMA

Write Multiple C5h PIO data-out

Write Sector(s) 30h PIO data-out

NOP 00h Non-data

Read Buffer E4h PIO data-in

Write Buffer E8h PIO data-out



CS2111

5.1.2 Power Management Command Set

5.1.3 Security Mode Feature Command Set

Table 11: Power Management Command Set


Check Power Mode E5h or 98h Non-data

Idle E3h or 97h Non-data

Idle Immediate E1h or 95h Non-data

Sleep E6h or 99h Non-data

Standby E2h or 96h Non-data

Standby Immediate E0h or 94h Non-data

Table 12: Security Mode Feature Command Set


Security Set Password F1h PIO data-out

Security Unlock F2h PIO data-out

Security Erase Prepare F3h Non-data

Security Erase Unit F4h PIO data-out

Security Freeze Lock F5h Non-data

Security Disable Password F6h PIO data-out



CS2111

5.1.4 SMART Feature Command Set

5.1.5 Host Protected Area Feature Command Set

Table 13: SMART Feature Command Set


SMART Disable Operations B0h Non-data

SMART Enable/Disable Autosave B0h Non-data

SMART Enable Operations B0h Non-data

SMART Execute OFF-LINE Immediate B0h Non-data

SMART Read Log B0h PIO data-in

SMART Read Data B0h PIO data-in

SMART Read Threshold B0h PIO data-in

SMART Return Status B0h Non-data

SMART Save Attribute Values B0h Non-data

SMART Write Log B0h PIO data-out

Table 14: Host Protected Area Feature Command Set


Read Native Max Address F8h Non-data

Set Max Address F9h Non-data

Set Max Set Password F9h PIO data-out

Set Max Lock F9h Non-data

Set Max Freeze Lock F9h Non-data

Set Max Unlock F9h PIO data-out



CS2111

5.1.6 48-bit Address Feature Command Set

5.1.7 NCQ Feature Command Set

5.1.8 Data Set Management (TRIM)

Table 15: 48-bit Address Feature Command Set


Flush Cache Ext EAh Non-data

Read Sector(s) Ext 24h PIO data-in

Read DMA Ext 25h DMA

Read Multiple Ext 29h PIO data-in

Read Native Max Address Ext 27h Non-data

Read Verify Sector(s) Ext 42h Non-data

Set Max Address Ext 37h Non-data

Write DMA Ext 35h DMA

Write Multiple Ext 39h PIO data-out

Write Sector(s) Ext 34h PIO data-out

Table 16: NCQ Feature Command Set


Read FPDMA Queued 60h DMA Queued

Write FPDMA Queued 61h DMA Queued

Table 17: Data Set Management (TRIM)


Data Set Management 06h DMA



CS2111

5.2 Identify Device Data

Table 18: ID Table Information

WordOffset

F=FixedV=Variable

X=BothValue Description

00 X 0040h General configuration bit-significant informa-tion

01 V 3FFFh Obsolete – Number of logical cylinders (16,383)

02 V C837h Specific configuration

03 X 0010h Obsolete – Number of logical heads (16)

04-05 X 0h Retired

06 X 003Fh Obsolete – Number of logical sectors per logical track (63)

07 - 08 V FFFFh FF0Fh

Reserved for assignment by the CompactFlash Association

09 X 0000h Retired

10 - 19 F varies Serial number (20 ASCII characters)

20 - 22 F 0000h Retired/Obsolete

23 - 26 F varies Firmware revision (20 ASCII characters)

27 - 46 F varies Model number (40 ASCII characters)

47 F 8002h Maximum number of sector transferred per interrupt on READ/WRITE MUTIPLE commands

48 F 4000h Trusted Computing feature set options

49 F 2F00h Capabilities

50 F 4000h Capabilities

51-52 X 0000h Obsolete

53 F 0007h Free-fall Control Sensitivity

54 X 3FFFh Obsolete – Number of logical cylinders (16,383)

55 X 0010h Obsolete – Number of logical heads (16)



CS2111

56 X 003Fh Obsolete – Number of logical sectors per logical track (63)

57-58 X FC10h00FBh

Obsolete

59 F 9101h Capabilities

60 - 61 V varies Total number of user addressable logical sec-tors for 28-bit commands

62 X 0000h Obsolete

63 X 0007h Multiword DMA Modes

64 F 0003h PIO Modes

65 F 0078h Minimum MultiDMA transfer cycle time per word

66 F 0078h Manufacturer's recommended MultiDMA cycle time

67 F 0078h Minimum PIO transfer cycle time without flow control

68 F 0078h Minimum PIO transfer cycle time with IORDY flow control

69 F 4D20h Additional Supported

70 F 0000h Reserved

71-74 F 0000h Reserved for Identify Packet Device command

75 F 001Fh Queue depth

76 F 830Eh Serial ATA capabilities

77 F 0086h Serial ATA Additional capabilities

78 F 044Ch Serial ATA features supported960 GB only

78 F 054Ch Serial ATA features supported240/480 GB only

79 V 0040h Serial ATA features enabled

80 F 03F0h Major version number

81 F 0000h Minor revision number

82 F 746Bh Commands and feature set supported




CS2111

83 F 7701h Commands and features sets supported

84 F 4163h Command set/feature supported extension.

85 V 7469h Command set/feature enabled.

86 V B401h Command set/feature enabled.

87 V 4163h Command set/feature enabled/supported.

88 V 407Fh Ultra DMA modes

89 F 0002h Time required for Normal Security Erase com-pletion

90 F 0002h Time require for enhanced Security Erase com-pletion

91 V 0000h Current advanced power management level value

92 V FFFEh Master Password Identifier

93 X 0000h Hardware reset result. For SATA devices, 93 shall be set to the value 0000h.

94 V 0000h Acoustic management value

95 F 0000h Stream Minimum Request Size

96 V 0000h Streaming Transfer Time - DMA

97 V 0000h Streaming Access Latency - DMA and PIO

98 - 99 F 0000h Streaming Performance Granularity

100 - 103 V varies Total number of user LBA for 48-bit address feature set

104 V 0000h Streaming Transfer Time - PIO

105 V 0008h Maximum number of 512-byte blocks per DATA SET MANAGEMENT command

106 F 4000h Physical sector size / Logical Sector Size

107 F 0000h Inter-seek delay for ISO-7779 acoustic testing in microseconds

108-111 F Varies Unique ID

112 - 115 F 0000h Reserved for 128 bit World Wide Name exten-sion to 128 bits

116 V 0000h Reserved for INCITS TR-37-2004




CS2111

117 - 118 F 0100h 0000h

Words per Logical Sector

119 F 4018h Commands and feature sets supported (Continued from words 84-82)

120 F 4018h Commands and feature sets supported or enabled (Continued from words 87-85)

121-126 F 0000h Reserved for expanded supported and enable settings

127 X 0000h Obsolete

128 V 0021h Security status

129-159 V varies Vendor specific

160 X 0000h CFA power mode 1

161-167 X 0000h Reserved for assignment by the CFA

168 X 0000h Device Nominal Form Factor

169 X 0001h DATA SET MANAGEMENT command support

170-173 X 0000h Additional Product Identifier (ATA String)

174-175 F 0000h Reserved

176-205 X 0000h Current media serial number (60 ASCII characters)

206 X 0000h SCT Command Transport


209 X 4000h Alignment of logical blocks within a larger physical block

210-211 V 0000h Write-Read-Verify Sector Count Mode 3 Only

212-213 F 0000h Write-Read-Verify Sector Count Mode 2 Only

214 X 0000h NV Cache Capabilities

215 V 0000h NV Cache Size in Logical Blocks (LSW)

216 V 0000h NV Cache Size in Logical Blocks (MSW)

217 F 0001h Nominal media rotation rate

218 V 0000h NV Cache Write Transfer Speed in MB/s

219 F 0000h NV Cache Options




CS2111

5.3 SMART Feature Support5.3.1 SMART Feature Command SetReport spare/bad blocks numbers in each memory management unit.

220 V 0000h Write-Read-Verify feature set

221 X 0000h Reserved

222 F 107Fh Transport Major revision number

223 F 0000h Transport Minor revision number


230-233 X 0000h Extended Number of User Addressable Sectors (QWord)

234 F 0001h Minimum number of 512 byte units per DOWN-LOAD MICROCODE command mode 3

235 F 0200h Maximum number of 512 byte units per DOWNLOAD MICROCODE command mode 3

236-254 X 0000h Reserved

255 X Varies Integrity word

Table 19: SMART Feature Register Values

Value Command Value Command

D0h Read Data D5h Read Log

D1h Read Attribute Threshold D6h Write Log

D2h Enable/Disable Autosave D8h Enable SMART Operations

D3h Save Attribute Values D9h Disable SMART Operations

D4h Execute OFF-LINE Immediate DAh Return Status




CS2111

5.3.2 SMART Data StructureShown are the 512 byte device SMART data structure. User can obtain the data using the “Read Data” command (D0h).

Table 20: SMART Data Structure

ByteOffset F/V/X/R1

1. F = the content of the byte is fixed and does not change.V = the content of the byte is variable and may change depending on the state of the device or the commands processed by the device.X = the content of the byte is vendor specific and may be fixed or variable.R = the content of the byte is reserved and shall be zero.

Description

0 - 361 X Vendor specific

362 V Off-line data collection status

363 X Self-test execution status byte

364 - 365 V Total time in seconds to complete off-line data collection activity (word)

366 X Vendor specific

367 F Off-line data collection capability

368 - 369 F SMART capability

370 F Error logging capability 7:1 Reservedbit 0 1=Device error logging supported

371 X Vendor specific

372 F Short self-test routine recommended polling time in minutes.

373 F Extended self-test routine recommended polling time in minutes. If FFh, use bytes 375 and 376 for the polling time.

374 F Conveyance self-test routine recommended polling time in minutes.

375 - 376 F Extended self-test routine recommended polling time in minutes (word).

377 - 385 R Reserved

386 - 510 X Vendor specific

511 V Data structure checksum



CS2111

6.0 Certifications, Declarations and Compliance

USAFCC Class B Notice This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

• This device may not cause harmful interference. • This device must accept any interference received, including interference that may cause

undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B

Table 21: Certifications, Compliance and Declarations

Certification Specifications Description Regions

FCC FCC Part 15 Subpart B, Class BANSI C63.4: 2009

EMI - emission compliance require-mentsEMC-Regulatory Requirements

USA

IC ICES-003 Issue 5 Canadian Standards Association Standard CAN/CSA-CISPR 22-10

Canada

CE EN-55022: 2010 / AC:2011, Class BEN-55024: 2010

EMI/EMC/ESD - emission and immunity compliance require-ments.

European Union (CE)

BSMI CNS 13438 Bureau of Standards, Metrology and inspection

Taiwan

SATA-IO Serial ATA Revision 3.2 Specification (August 2013)

Serial ATA International Organiza-tion.

International

RoHS EU legislation restricting the use of hazardous sub-stances in electrical and electronic equipment Directive 2002/95/EEC

Restriction of Hazardous Sub-stances

European Union (CE)

REACH Registration, Evalu-ation, Authorization and Restrictions of substances under previous EU Direc-tive 67/548/EEC

Registration, Evaluation, Authori-zation (and/or restriction), of Chemicals.

European Union (CE)



CS2111

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to providereasonable protection against harmful interference in a residential installation. Thisequipment generates, uses and can radiate radio frequency energy and, if not installed andused in accordance with the instructions, may cause harmful interference to radiocommunications. However, there is no guarantee that interference will not occur in aparticular installation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off and on, the useris encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected. • Consult the dealer or an experienced radio/television technician for help.

Modifications: Any modifications made to this device that are not approved by PNY mayvoid the authority granted to the user by the FCC to operate this product.

CANADACAN ICES-3 (B)/NMB-3(B)



CS2111

7.0 ReferencesStandards referenced in this document.

Table 22: References

Date Title Source

July 2012 Solid-State Drive (SSD) Endurance Work-loads (JESD219A)

http://www.jedec.org/standards-docu-ments/results/jesd219a

Feb 2011 Solid-State Drive (SSD) Requirements and Endurance Test Method (JESD218A)

http://www.jedec.org/standards-docu-ments/docs/jesd218a

Aug 2009 ACS-2-ATA/ATAPI Command Set 2 Specifi-cation

http://www.t13.org

June 2009 Serial ATA Revision 3.0 http://www.sata-io.org

May 2006 SFF-8223, 1.8-inch Drive w/Serial Attach-ment Connector

http://www.sffcommittee.org

May 2005 SFF-8201, 1.8-inch drive form factor http://www.sffcommittee.org

2010

2008

2006

2012

2005

2008

2009

2004

EN 55024 (Immunity test standards)

IEC 61000-4-2 (Electrostatic dis-charge)

IEC 61000-4-3 (RF electromagnetic field)

IEC 61000-4-4 (Electrical fast tran-sient/burst immunity test)

IEC 61000-4-5 (Surge)

IEC 61000-4-6 (Conducted radio fre-quency disturbances)

IEC 61000-4-8 (Power frequency mag-netic fields)

IEC 61000-4-11 (Voltage variations, voltage dips, short interruptions and voltage variations immunity tests)

http://www.iec.ch



CS2111

8.0 Terms and Acronyms

Table 23: Terms and Acronyms

Term Description

ATA Advanced Technology Attachment

BLK Bulk

DAS Device Activity Signal

DMA Direct Memory Access

EXT Extended

FPDMA First Party Direct Memory Access

GB Gigabyte (1,000,000,000 bytes)

HDD Hard Disk Drive

IOPS Input/Output Operations Per Second

KB Kilobyte (1,000 bytes)

LBA Logical Block Address

MB Megabyte (1,000,000 bytes)

MLC Multi-level Cell

MTBF Mean Time Between Failures

NCQ Native Command Queuing

NOP No Operation

PIO Programmed Input/Output

RB Retail Box

SATA Serial Advanced Technology Attachment

SMART Self-Monitoring, Analysis and Reporting Technology

SSD Solid-State Drive

UBER Uncorrectable Bit Error Rate

TBW Terabytes Written

TBD To Be Determined



CS2111

BLANK PAGE


pny ssd datasheet cs2111 library/support/pny products/resource...05/29/2015 document number:...

Documents