pneumatic conveying systems and storage … · solution a: pneumatic conveying system of wood...
TRANSCRIPT
PNEUMATIC CONVEYING SYSTEMSAND STORAGE PELLET
PRODUCTS LIST
V.01eng
Pag 2 www.denaspirazioni.com [email protected]
INDEX
POSSIBLE APPLICATIONS WITH THE WX
Solution A: System of pneumatic conveying of wood pellets with suction probe and localstorage. pag. 4
Solution B: System of pneumatic conveying of wood pellets with two suction probes andlocal storage. pag. 5
Solution C: System of pneumatic conveying of wood pellets for pellet stove or thermo fi-replace with silo. pag. 6
Solution D: System of pneumatic conveying of wood pellets with multiple suction probesand local storage. pag. 7
Solution E: System of pneumatic conveying of wood pellets with suction big-bag. pag. 8
Solution F: System of pneumatic conveying of wood pellets from underground storagetank. pag. 9
Solution G: System of pneumatic conveying of pellets from storage silo. pag. 10
Solution H: System of pneumatic conveying of wood for long distances pellets for highdistances. pag. 11
PRODUCTS AND ACCESSORIES
PNEUMATIC CONVEYOR WX5 pag. 12
PNEUMATIC CONVEYOR WX10 pag. 13
PNEUMATIC CONVEYOR WX15 pag. 14
PNEUMATIC CONVEYOR WX50-55 pag. 15
GALVANIZED STEEL SILO pag. 16
INDOOR SACK SILO pag. 17
SPARE PARTS pag. 18
.
Pag 3 www.denaspirazioni.com [email protected]
The pneumatic conveyors Dena series WX offer significant advantages over traditional power systems, the mostadvantageous is on the possibility to exploit the return air of the turbine that is conveyed inside the suctionprobe so it happens a gradual and continuous distribution of pellets in the intake circuit, it is possible to com-bine the WX to any type of silos or storage warehouse with flat bottom without the aid of mechanical systemsof extraction.
ADVANTAGES OF THE SYSTEM PNEUMATIC WX
Economic
With the WX can build a metal container, wood or masonry elementary buildingsaving the cost of purchasing the storage silos.
Pneumatic conveying suction
Among the numerous advantages the ability to perform, complex paths, the ab-sence of leaks or spills of material and the simplicity of the system
Automatic operation
The functioning of WX is fully automatic.
Quick and easy installation
The installation and commissioning are carried out quickly and easily.
Compatible with all boilers and pellet stoves
The available versions allow the application of any boiler or pellet stove on themarket and any silo interior, exterior or basement.
Gentle treatment
During the pneumatic transport the pellets is unloaded at destination clean andperfectly intact
Solution A: Pneumatic conveying system of wood pellets with suction probe and local storage.
Pag 4 www.denaspirazioni.com [email protected]
1
1 Suction probe art n° PR0001
2 Discharge hopper WX10 art n° WX1001
3 Suction motor WX10 art n° WX1002
4 Hose pneumatic conveying pellets art n° TB0001
5 Return air hose art n° TB0001
6 Storage room
3
2
Pag 5 www.denaspirazioni.com [email protected]
Solution B: Pneumatic conveying system of wood pellets with two suction probes andlocal storage
1
1 Suction probe art n° PR0001
2 Discharge hopper WX10 art n° WX1001
3 Suction motor WX10 art n° WX1002
4 Hose pneumatic conveying pellets art n° TB0001
5 Return air hose art n° TB0001
6 Storage room
3
2
Pag 6 www.denaspirazioni.com [email protected]
Solution C: Pneumatic conveying system of wood pellets for pellet stove or thermo fire-place with silo.
1
1 Discharge hopper WX5 art n° WX5005
2 Storage silo of 1 m3 art n° SL001M
3 Hose pneumatic conveying pellets art n° TB0001
4 Return air hose art n° TB0001
5 Connection module for the suction system art n° PR00ES
6 Suction motor WX10 art n° WX1002
6
5
Pag 7 www.denaspirazioni.com [email protected]
Solution D: Pneumatic conveying system of wood pellets with multiple suction probes andlocal storage.
1
1 Suction probe art n° PR0001
2 Discharge hopper WX10 art n° WX1001
3 Suction motor WX10 art n° WX1002
4 Return air hose art n° TB0001
5 Manual changeover unit art n° PR0011
6 Hose pneumatic conveying pellets art n° TB0001
3
2 5
Pag 8 www.denaspirazioni.com [email protected]
Solution E: Pneumatic conveying system of wood pellets with suction big-bag.
1
1 Suction probe big-bag art n° PR3669
2 Pneumatic conveyor WX15 art n° WX1015
3 Hose pneumatic conveying pellets art n° TB0001
4 Return air hose art n° TB0001
2
Pag 9 www.denaspirazioni.com [email protected]
Solution F: Pneumatic conveying system of wood pellets from underground storage tank.
1
1 Pneumatic conveyor WX15 art n° WX1015
2 Return air hose art n° TB0001
3 Hose pneumatic conveying pellets art n° TB0001
Pag 10 www.denaspirazioni.com [email protected]
Solution G: Pneumatic conveying system of pellets from storage silo.
1 Connection module for the suction system art n° PR00ES
2 Discharge hopper WX10 art n° WX1001
3 Suction motor WX10 art n° WX1002
4 Return air hose art n° TB0001
5 Hose pneumatic conveying pellets art n° TB0001
6 Storage silo of 1 m3 art n° SL001M
2
3 1
Pag 11 www.denaspirazioni.com [email protected]
Solution H: Pneumatic conveying system of wood for long distances pellets for long distances.
1
1 Connection module with extraction screw art n° CE00WX
2 Discharge hopper WX15G art n° WXG115
3 Steel pipe pneumatic conveying pellets art n° TB0002
4 Steel pipe in depression art n° TB0002
5 Suction motor WX55 art n° WX1055
6 Storage silo of 1 m3 art n° SL001M
5
2
Pag 12 www.denaspirazioni.com [email protected]
The pneumatic conveyor WX5 is ideal for dosing granular pro-ducts to automate your system with minimal expense and main-tenance.
� IDEAL FOR PELLET STOVES AND BIOMASS BOILERS� AUTOMATIC OPERATION� ADAPTABLE FOR ANY SYSTEM� PROGRAMMABLE BAND
MODEL Unit of measure WX5 WX5-S
Power W 1500 1500
Voltage V 230 230
Frequency Hz 50 50
Hopper capacity internal lt 3 3
Max. vacuum rate Mbar 2200 2200
Filter cleaning system / Manual Automatic
Pressure cleanig system Air - 6 bar
Structure Material Steel Steel
Total weight kg 22 22
Dimensions motor mm 270 x 210 x H 420 270 x 210 x H 420
Suction inlet mm Ø 50 Ø 50
Dimensions hopper mm 153 x 273 x H 250 153 x 273 x H 250
STANDARD EQUIPMENT
� Lcd control panel� Cartridge filter in polyester� Level sensor � Exhaust valve product� Cable alimentation shuko of 3 mt� Cable alimentation sensor of 2 mt
PNEUMATIC CONVEYOR WX5
ACCESSORIES
Suction probe
Article n°
PR0001Antistatic hose Ø 50
(min. 20mt)
Article n°
TB0001
Galvanized steelpipe Ø 50
Article n°
TB0002Support bracket for
motor WX10
Article n°
STWX01
90° bend steel
Article n°
CA5001Hose clamp to article
n° TB0001
Article n°
FS0001
Pag 13 www.denaspirazioni.com [email protected]
The pneumatic conveyor WX10 is ideal for dosing granular pro-ducts to automate your system with minimal expense and main-tenance.
� IDEAL FOR PELLET STOVES AND BIOMASS BOILERS� AUTOMATIC OPERATION� ADAPTABLE FOR ANY SYSTEM� PROGRAMMABLE BAND
MODEL Unit of measure WX10 WX10-S
Power W 1500 1500
Voltage V 230 230
Frequency Hz 50 50
Hopper capacity internal lt 5 5
Max. vacuum rate Mbar 2200 2200
Filter cleaning system / Manual Automatic
Pressure cleanig system Air - 6 bar
Structure Material Steel Steel
Total weight kg 22 22
Dimensions motor mm 270 x 210 x H 420 270 x 210 x H 420
Suction inlet mm Ø 50 Ø 50
Dimensions hopper mm 280 x H 270 280 x H 270
STANDARD EQUIPMENT
� Lcd control panel� Cartridge filter in polyester� Level sensor � Exhaust valve product� Cable alimentation shuko of 3 mt� Cable alimentation sensor da 2 mt
PNEUMATIC CONVEYOR WX10
ACCESSORIES
Suction probe
Article n°
PR0001Antistatic hose Ø 50
(min. 20mt)
Article n°
TB0001
Galvanized steelpipe Ø 50
Article n°
TB0002Support bracket for
motor WX10
Article n°
STWX01
90° bend steel
Article n°
CA5001Hose clamp to article
n° TB0001
Article n°
FS0001
Pag 14 www.denaspirazioni.com [email protected]
The pneumatic conveyor WX15 is ideal for dosing granular pro-ducts to automate your system with minimal expense and main-tenance.
� IDEAL FOR PELLET BOILERS AND BIOMASS� AUTOMATIC OPERATION� ADAPTABLE FOR ANY SYSTEM� PROGRAMMABLE BAND
MODEL Unit of measure WX15 WX15-S
Power W 1500 1500
Voltage V 230 230
Frequency Hz 50 50
Hopper capacity internal lt 9 9
Max. vacuum rate Mbar 2200 2200
Filter cleaning system / Manual Automatic
Pressure cleanig system Air - 6 bar
Structure Material Steel Steel
Total weight kg 24 24
Ingombro mm 330 x H700 330 x H700
Suction inlet mm Ø 50 Ø 50
STANDARD EQUIPMENT
� Lcd control panel� Cartridge filter in polyester� Level sensor � Exhaust valve product� Cable alimentation shuko of 3 mt
PNEUMATIC CONVEYOR WX15
ACCESSORIES
Suction probe
Article n°
PR0001Antistatic hose Ø 50
(min. 20mt)
Article n°
TB0001
Galvanized steelpipe Ø 50
Article n°
TB0002Hose clamp to article
n° TB0002
Article n°
FS0002
Manual changeoverunit
Article n°
PR0011Hose clamp to article
n° TB0001
Article n°
FS0001
Pag 15 www.denaspirazioni.com [email protected]
The pneumatic conveyor WX50 can pneumatically convey thegranules at long distances and with the flow of material up to400 kg/h.
� IDEAL FOR PELLET BOILERS AND BIOMASS� AUTOMATIC OPERATION� ADAPTABLE FOR ANY SYSTEM� PROGRAMMABLE BAND
MODEL Unit of measure WX50 WX55
Power kW 2,2 3
Voltage V 230-380 230-380
Frequency Hz 50 50
Hopper capacity internal lt 9 9
Max. vacuum rate Mbar 1700 2500
Filter cleaning system / Cartuccia autopulente Automatic
Pressure cleanig system Air 6 bar 6 bar
Structure Material Steel Steel
Total weight kg 105 110
Dimensions motor mm 600x 600 x H 1300 600x 600 x H 1300
Suction inlet mm Ø 50 Ø 50
Dimensions hopper mm Ø 280 x H 700 Ø 280 x H 700
STANDARD EQUIPMENT
� Electrical panel installed on the vacuum motor� Filter cleaning system� Level sensor � Exhaust valve product� Vacuum motor remote
PNEUMATIC CONVEYOR WX50-WX55
ACCESSORIES
Suction probe
Article n°
PR0001Antistatic hose Ø 50
(min. 20mt)
Article n°
TB0001
Galvanized steelpipe Ø 50
Article n°
TB0002Hose clamp to article
n° TB0002
Article n°
FS0002
90° bend steel
Article n°
CA5001Hose clamp to article
n° TB0001
Article n°
FS0001
Pag 16 www.denaspirazioni.com [email protected]
The storage silo SUM is ideal to complement all air extraction sy-stems.
� QUICK CONNECTION SUCTION PROBE� CONSTRUCTION GALVANIZED STEEL� SUITABLE FOR ANY SYSTEM WX� MANUAL FILLING WITH BAGS� SUPERIOR PROTECTION
Article n° Volume (m3) Tonnage Height A (cm) Dimensions BxC (cm) Extraction system
SL0001M 1 0,65 140 103x103 pneumatic
SL0001M 1 0,65 140 103x103 screw (0,18kw)
SL0015M 1.5 0,975 190 103x103 pneumatic
SL0015M 1.5 0,975 190 103x103 screw (0,18kw)
SL0003M 3 1,95 190 103x206 pneumatic
SL0003M 3 1,95 190 103x206 screw (0,18kw)
SL0005M 5 3,20 250 170x170 pneumatic
SL0005M 5 3,20 250 170x170 screw (0,18kw)
STORAGE SILO STEEL
ACCESSORIES
Module withpneumaticextraction
Article n°
PR00ESModule extension
by 0,5 m3
Article n°
ES0050
Module with extraction
screw
Article n°
PRCL01
Filler neck forpneumatic truck
storz 4”
Article n°
BR0004
90° bend steel
Article n°
CA5001Hose clamp to article
n° TB0001
Article n°
FS0001
Assembly in series
Pag 17 www.denaspirazioni.com [email protected]
The flexible pellet silo model SIT is fitted with an auger deliverysystem and suction adapter. The method of construction allowsit to be taken into any room in single parts and put together.Sides and cover of the pellet store are made of flexible and du-rable antistatic textile material. A compact steel frame, conicalbase and special delivery system provide optimal and reliableconveying of pellets.
� QUICK CONNECTION SUCTION PROBE� GALVANIZED STEEL FRAME� SUITABLE FOR ANY SYSTEM WX� PNEUMATIC FILLING SYSTEM� MADE OUT OF ANTI-STATIC, HIGH-RESISTANCE POLYESTER
STORAGE SILO TEXTILE
ACCESSORIES
90° bend steel
Article n°
CA5001Hose clamp to article
n° TB0001
Article n°
FS0001
Article n° Volume (m3) Tonnage Height A (cm) Dimensions BxC (cm) Height D (cm) Extraction system
SIT5 5 3.2 204 206x206 225 pneumatic
SIT5-C 5 3.2 204 206x206 225 screw (0,18kw)
SIT8 8 5.2 204 256x256 225 pneumatic
SIT8-C 8 5.2 204 256x256 225 screw (0,18kw)
SIT10 10 6.4 204 306x306 225 pneumatic
SIT10-C 10 6.4 204 306x306 225 screw (0,18kw)
Module with pneumaticextraction
Articolo n°
PR00ESModule extension
by 0,5 m3
Articolo n°
ES0050
Module with extraction
screw
Articolo n°
PRCL01
Filler neck forpneumatic truck
storz 4”
Articolo n°
BR0004
Pag 18 www.denaspirazioni.com [email protected]
SPARE PARTS
Single-phase motor
Article n°
MBP015Cartridge filter
Article n°
CAR150
Selenoid valve
Article n°
ELE001Sensor
Article n°
SENSO1
Kit motor brushes
Article n°
MSP015Lcd control panel
Article n°
CEQ001