pm techno pvt. ltd
TRANSCRIPT
Date :
1 2 3 4 5
1 Thickness LV3 1.5±0.075mm Digital Micrometer 1.52 1.52 1.52 1.51 1.51 OK
2 Diameter LV3 4.80±0.05 mm Pin Gauge /Plug Gauge OK
3 Position 0.20 AB VMM/Receiver Gauge /CMM OK
4 Position 0.15 ABC VMM/Receiver Gauge /CMM OK
5 Diameter LV3 8.10+0.10 /-0.00 mm Pin Gauge /Plug Gauge OK
6 Diameter LV3 4.80 ±0.05 mm Pin Gauge /Plug Gauge OK
7 Flatness 0.20 mm VMM /Height Gauge 0.11 0.11 0.11 0.12 0.11 OK
8 Diameter LV3 4.15 ±0.05 mm Pin Gauge /Plug Gauge OK
9 Position LV3 0.30mm DEA VMM/Receiver Gauge /CMM OK
10 Distance 4.00 ± 0.20 mm VMM /Height Gauge 4.10 4.08 4.12 4.11 4.10 OK
11 Position 0.30mm ABD VMM/Receiver Gauge /CMM OK
12 Diameter LV3 4.15 ±0.05 mm Pin Gauge /Plug Gauge OK
13Profile
Unilateral inwardLV3 0.30 mm DEA VMM/Receiver Gauge /CMM OK
14Profile
Unilateral inwardLV3 0.30 mm VMM/Receiver Gauge /CMM OK
15 Distance 15.44 ±0.25 mm VMM /Height Gauge 15.47 15.47 15.48 15.48 15.47 OK
16 Profile 0.25 DEA VMM/Receiver Gauge /CMM OK
17 Profile LV3 0.35 DEA VMM/Receiver Gauge /CMM OK
18Profile
Unilateral inward0.30 DEA VMM/Receiver Gauge /CMM OK
19 Diameter LV3 4.40±0.10 mm Pin Gauge /Plug Gauge OK
20 Position LV3 0.20 mm DEA VMM/Receiver Gauge /CMM OK
21 Diameter LV3 5.10±0.10 mm Pin Gauge /Plug Gauge OK
22 Position LV3 0.20 mm DEA VMM/Receiver Gauge /CMM OK
23 Distance 11.67 ± 0.25 mm VMM /Height Gauge 11.69 11.70 11.70 11.68 11.69 OK
24 Radius (G-G) R1.50 +0.30/-0.10 mm VMM/Radius Gauge OK
25 Thickness (G-G) 1.2 Min VMM /Point Micrometer 1.40 1.41 1.41 1.40 1.40 OK
26 Radius (E-E)(2places) R1.50 ±0.20 mm VMM/Radius Gauge OK
27 Thickness(E-E)(2places) 1.20 Min VMM /Point Micrometer 1.41 1.41 1.41 1.40 1.39 OK
28 Radius (B-B) R 0.50 ±0.20 VMM/Radius Gauge OK
29 Thickness (B-B) 1.20 Min VMM /Point Micrometer 1.41 1.41 1.40 1.41 1.41 OK
30 Radius (C-C) R 0.50 ±0.20 VMM/Radius Gauge OK
31 Thickness (C-C) 1.2 Min VMM /Point Micrometer 1.39 1.38 1.39 1.39 1.39 OK
32 Radius (D-D) R 0.50 ±0.20 VMM/Radius Gauge OK
33 Thickness (D-D) 1.20 Min VMM /Point Micrometer 1.39 1.42 1.38 1.38 1.40 OK
34 Material LV3A.Type:Alloy steel sheet /strip
B.Grade:HC 340LA PER EN10268Supplier Material Certificate OK
35 Steel mill JSW Supplier Material Certificate OK
36 Plating LV3
MFZn13TC per NES M4040
&Min 13 microns(13 microns to
25 microns)
Supplier report OK
37 Appearance
Free from burrs(10% of sheet
thickness allowed),No sharp edges &
Free from oil & grease,No line mark,
No miss blank, No crack,No Profile
offset No plating peel off,
No dull plating No damage ,no red
rust, no white rust
Visual OK
REMARKS : VMM-Vission measurement machine DV - Digital vernier RMTC - Raw Material Test Certificate
INSPECTED BY : Saravana APPROVED BY : Satish
ACCEPTED REJECTED ACCEPTED UNDER DEVIATION DEVIATION NO. & DATE
Refer RMTC Report
Refer RMTC Report
Refer PTC report
Visually Checked
OK to Radius Gauge
OK to Radius Gauge
OK to Radius Gauge
OK to Radius Gauge
OK to Radius Gauge
OK to Receiver gauge
OK to Receiver gauge
OK to Receiver gauge
OK to Plug Gauge
OK to Receiver gauge
OK to Receiver gauge
OK to Receiver gauge
OK to Receiver gauge
OK to Receiver gauge
OK to Plug Gauge
OK to Receiver gauge
OK to Plug Gauge
OK to Plug Gauge
VISUAL CHECKS : Free from Burrs, Tool marks.
DIMENSIONAL CHECKS
SL NO. PARAMETERSSpecial Char.
ClassSPECIFICATIONS INSTRUMENTS USED
ACTUAL
DECISION
OK to Plug Gauge
OK to Receiver gauge
OK to Receiver gauge
OK to Plug Gauge
OK to Plug Gauge
Part Name Back plate front LH Invoice / DC No. & date PMTPVT1-12022
Part No. 3053959 C Quantity Supplied Kg / Nos 960 Nos.
Customer MAGNA CLOSURES Control plan No. PMT / CP / 3053959
PM Techno Pvt. Ltd. REF NO. : PMT/QAD/F/03
REV.NO: 00
REV. DATE: 03.10.2017
R/C No. :9404 16/10/2021FINAL INSPECTION REPORT
